Intel® Server Board S1400SP
Total Page:16
File Type:pdf, Size:1020Kb
Intel® Server Board S1400SP Technical Product Specification Intel order number G64248-003 Revision 2.1 May, 2014 Revision History Intel® Server Board S1400SP TPS Revision History Date Revision Number Modifications September, 2012 1.0 Initial release. December, 2013 2.0 . In Table 1, add a note that SAS Module and eUSB SSD can’t be supported at the same time. Added support for Intel® Xeon® processor E5-2400 v2 product family May, 2014 2.1 Added PCI Express* Lane Mapping. ii Intel order number G64248-003 Revision 2.1 Intel® Server Board S1400SP TPS Disclaimers Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined". Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature. Intel and Xeon are trademarks of Intel Corporation in the U.S. and/or other countries. *Other names and brands may be claimed as the property of others. Copyright © 2014 Intel Corporation. All rights reserved. Revision 2.1 Intel order number G64248-003 iii Table of Contents Intel® Server Board S1400SP TPS Table of Contents 1. Introduction .......................................................................................................................... 1 1.1 Chapter Outline ........................................................................................................ 1 1.2 Server Board Use Disclaimer .................................................................................. 1 2. Overview ............................................................................................................................... 2 2.1 Intel® Server Boards S1400SP Feature Set ............................................................ 2 2.2 Server Board Layout ................................................................................................ 4 2.2.1 Server Board Connector and Component Layout .................................................... 5 2.2.2 Server Board Mechanical Drawings ........................................................................ 6 2.2.3 Server Board Rear I/O Layout ............................................................................... 12 3. Functional Architecture ..................................................................................................... 14 3.1 Processor Support ................................................................................................. 14 3.1.1 Processor Socket Assembly .................................................................................. 15 3.2 Processor Function Overview ................................................................................ 15 3.2.1 Intel® QuickPath Interconnect ................................................................................ 16 3.2.2 Integrated Memory Controller (IMC) and Memory Subsystem .............................. 17 3.2.3 Processor Integrated I/O Module (IIO) ................................................................... 25 3.3 Intel® C600-A Chipset Functional Overview .......................................................... 28 3.3.1 Low Pin Count (LPC) Interface .............................................................................. 29 3.3.2 Universal Serial Bus (USB) Controller ................................................................... 29 3.3.3 On-board Serial Attached SCSI (SAS)/Serial ATA (SATA) Support and Options . 30 3.3.4 Manageability ......................................................................................................... 32 3.4 Integrated Baseboard Management Controller (BMC) Overview .......................... 33 3.4.1 Super I/O Controller ............................................................................................... 34 3.4.2 Graphics Controller and Video Support ................................................................. 35 3.4.3 Baseboard Management Controller ....................................................................... 36 4. System Security ................................................................................................................. 38 4.1 BIOS Password Protection .................................................................................... 38 4.2 Trusted Platform Module (TPM) Support ............................................................... 39 4.2.1 TPM security BIOS ................................................................................................ 39 4.2.2 Physical Presence ................................................................................................. 40 4.2.3 TPM Security Setup Options ................................................................................. 40 4.3 Intel® Trusted Execution Technology (Intel® TXT) ................................................. 42 5. Technology Support .......................................................................................................... 44 5.1 Intel® Trusted Execution Technology ..................................................................... 44 5.2 Intel® Virtualization Technology – Intel® VT-x/VT-d/VT-c ....................................... 44 5.3 Intel® Intelligent Power Node Manager .................................................................. 45 5.3.1 Hardware Requirements ........................................................................................ 46 6. Platform Management Functional Overview .................................................................... 47 6.1 Baseboard Management Controller (BMC) Firmware Feature Support................. 47 iv Intel order number G64248-003 Revision 2.1 Intel® Server Board S1400SP TPS Table of Contents 6.1.1 IPMI 2.0 Features .................................................................................................. 47 6.1.2 Non IPMI Features ................................................................................................. 48 6.1.3 New Manageability Features ................................................................................. 49 6.2 Basic and Advanced Features ............................................................................... 50 6.3 Integrated BMC Hardware: Emulex* Pilot III .......................................................... 51 6.3.1 Emulex* Pilot III Baseboard Management Controller Functionality ....................... 51 6.4 Advanced Configuration and Power Interface (ACPI) ........................................... 52 6.5 Power Control Sources .......................................................................................... 52 6.6 BMC Watchdog ...................................................................................................... 53 6.7 Fault Resilient Booting (FRB) ................................................................................ 53 6.8 Sensor Monitoring .................................................................................................. 54 6.9 Field Replaceable Unit (FRU) Inventory Device .................................................... 54 6.10 System Event Log (SEL) ....................................................................................... 55 6.11 System Fan Management ...................................................................................... 55 6.11.1 Thermal and Acoustic Management .....................................................................