Next Generation Electric Vehicles and High Speed Railway

2nd Indo Japan Bilateral Symposium on Futuristic Materials and Manufacturing for Next Generation Electric Vehicles and High Speed Railway

2nd - 3rd March 2020, ICSR Halls, IIT MADRAS, CHENNAI

Day I - 2nd March, 2020

Time Auditorium

0930-1015 Inauguration

Session A1- Invited Lecture

1015-1045 A1-I1 Dr. Seshu Bhagavathula, Ashok Leyland, India Designing electric vehicles demand a new mindset

1045-1100 Coffee/Tea Break

Session B1- Invited Lecture

1100-1130 B1-I2 Mr. Achal Khare, NHRSCL, India Indigenous solutions opportunities for High Speed Railway applications 1130-1200 B1-I3 Mr. Masamichi Sakane , Mitsubishi Electric Corp, Japan Traction Systems for High Speed Railway 1200-1230 B1-I4 Dr. Sudhanshu Mani, Integral Coach Factory, India Journey of Train 18, a semi-high speed train, on way to India's tryst with high-speed trains. 1230-1300 B1-I5 Dr K Subramanian, Powergear Ltd. India R&D ecosystem for Next Generation Electric Vehicles

1300-1400 Lunch

HALL 2 HALL-3 Session C2 Session C3 1400-1430 C2-I6 Ms Yuiko Sakayama, Nippon Steel Corp, C3-I9 Prof. Ramaprabhu, IIT Madras Evaluation of thermal crack propagation for Electrocatalytic and polysulfide trapping low alloy steel brake disk for very high-speed behavior of Molybdenum trioxide for room train temperature sodium sulfur battery 1430-1500 C2-I7 Dr. Hiroo Taura, Nagaoka UT, Japan C3-I10 Prof. Karunakaran K.P, IIT Bombay Improvement of journal bearing performance Ultra-light helicopters/drones for organ by surface texture transport 1500-1530 C2-I8 Mr. S. Ramesh, Sundaram Fasteners C3-I11 Dr. R Gopalan, ARC Challenges ahead and its associated impacts Li-ion batteries and magnets for electric of upcoming disruptive technologies on vehicle applications automobile industries and way forward strategies

1530-1545 Coffee/Tea Break

HALL 2 HALL-3 Session D2 Session D3 1545-1615 D2-I12 Dr. Yukio Miyashita, Nagaoka UT D3-I14 Mr. Akiyoshi Yokota, Shimadzu Corp., Effect of welding process on fatigue Introduction of Shimadzu corporation and its characteristic of TIG and MIG welds in non- high performance universal testing machine combustible magnesium alloys AGX-V 1615-1645 D2-I13 Dr. Palani I A, IIT Indore, India D3-I15 Prof. Masakazu Okazaki, Nagaoka UT Design and development of shape memory Prediction of fretting fatigue lives based on alloy coated optical fibre sensor for condition contact mechanics -for design of next monitoring applications generation high speed vehicles Session D2 Session D3 1645-1700 D2-C1 Dr. R.T. Durai Prabhakaran, IIT Jammu D3-C3 Dr. Sachin Singh Gautam, IIT Guwahati High-performance composites – failure Thermal management of the lithium-ion analysis under compression loading battery system for electric vehicles 1700-1715 D2-C2 Ms. Shiyu Suzuki, Tokyo Inst of Tech D3-C4 Mr. G. Venkatesh, IIT Madras Creep-fatigue crack propagation in Ni-base Contamination assessment due to fretting in superalloy: a transient crack propagation nickel foam based flow field distributors used induced by tension hold in fuel cells.

Conference Dinner (Design Hotel, Phoenix Mall, Velachery, Chennai 1800-2100

Day II - 3rd March, 2020

Hall 2 Hall 3 Session E2 Session E3 0900-0930 E2-I16 Mr. Shubhranshu, Rail wheel plant E3-I18 Dr Shankar Venugopal, Futuristic material for rail vehicles, Design, Mahindra & Mahindra, manufacture and the supply-chain Materials Strategy to realize the vision of Sustainable Urban Mobility 0930-1000 E2-I17 Prof. Mitsutaka Sugimoto, Nagaoka UT E3-I19 Dr. Neelakandan C, 3M India Ltd Simulation on shield behavior at a sharp curve Material solutions to enhance performance of by kinematic shield model various powertrain components in electric vehicles Session E2 Session E3 1000-1015 E2-C5 Dr. S.B. Arya, NIT-Surathkal, India E3-C8 Mr. K Parthasaradhi, IIT Madras Materials degradation problem for electric Modelling and analysis of damages in vehicle insulating coatings used in bearings of traction motors of electric vehicles and high speed railways 1015-1030 E2-C6 Mr. A Chandra Kiran, IIT Madras E3-C9 Mr. P. Karthik, IIT Madras High performance selective reinforced brake Numerical studies on heat generation in pad material design and analysis for use in contacting surfaces experiencing current flow next generation automotives in bearings used in traction motors of electric vehicles and railway 1030-1045 E2-C7 Mr. Subhabrata Banerjee, E3-C10 Mr. Krishanu Mondal, IIT Madras Dr. SCS Degree Engg College Design and development of novel tribometer Trends of aluminium metal matrix composite for evaluating the tribo characteristics under in railroad industry electrical environment 1045-1100 Coffee/Tea Break Session F2 Session F3 1100-1130 F2-I20 Prof. Karunakaran K.P, IIT Bombay F3-I23 Dr. Deepak Kumar, IIT Delhi Path planning challenges in electron beam Imparting self-lubrication character to hyper additive manufacturing eutectic Al-Si alloy

1130-1200 F2-I21 Dr. Yamagishi Satoshi, F3-I24 Prof. Hisayuki Suematsu, Nagaoka UT Niigata Inst of Tech MOPAC Simulation of organic molecules Failure of thermal barrier coatings for gas intercalated in sr2ca1cu2oy superconductor turbine by environmental impurities 1200-1230 F2-I22 Dr. Yuichi Otsuka, Nagaoka UT F3-I25 Prof. Naritoshi Aoyagi, Interactions between fretting wear and crack National Inst of Tech initiation behavior in fretting fatigue process Strength characteristics of porous ti6al4v of Tii-6Al-4V alloy for transportation filters by powder sintering technique

Hall 2 Hall 3 Session F2 Session F3 1230-1245 F2-C11 Mr. Aashish Shaju, IIT Hyderabad F3-C13 Dr. Joysurya Basu, IIT (BHU) Analysis of improved transient tire modelling Mechanisms of energy harvesting at nanoscale : role of atomic resolution electron microscopy 1245-1300 F2-C12 Ms. Dipsikha Ganguly, IIT Madras F3-C14 Mr. Puneet Jindal, IIT Kanpur Etched carbon nanotubes wrapped α-Fe2O3 Analysis of requirements for thermal nanoparticles as efficient anode material for management of high-power Li-ion batteries in Lithium ion battery heavy-duty transportation. 1300-1400 Lunch Session G2 Session G3 1400-1430 G2-I26 Dr. Yasuhiro Yamazaki, Chiba Univ G3-I28 Prof. Masatoshi Takeda, Temperature dependence of fatigue crack Nagaoka UT propagation behavior in a forged titanium Materials for direct thermal to electrical aluminide alloy energy conversion - boron-rich borides 1430-1500 G2-I27 Dr. Jayaprakash M, IIT Indore G3-I29 Dr. T.V.V.L.N. Rao, SRM IST, India Development of Al based metal matrix Analysis of surface slip texture configurations composite with improved properties using using narrow groove theory: application to hybrid reinforcements through friction stir journal bearing processing route Session G2 Session G3 1500-1515 G2-C15 Mr. Guruprasad S Hegde, IIT Madras G3-C17 Mr. Parthiban. P Cation doping in the discharge products of li- IIITDM Kancheepuram o2 batteries Influence of graphene on tensile and indentation behavior of polyamide 66 nanocomposites 1515-1530 G2-C16 Mr. Rahul Vakati, Nagaoka UT G3-C18 Mr. Taisei Kurosaki, Nagaoka UT Preparation of aluminum nanosized powder Development of cryostats for color center by pulsed wire discharge and its particle introduction /detection in a pulsed intense control relativistic electron beam accelerator 1530-1545 Coffee/Tea Break Session H2 Session H3 1545-1600 H2-C19 Ms. Meenakshi Seshadhri G, IIT M H3-C23 Mr. Siddharth Aphale, Accelerating Li- polysulfides redox kinetics by K.K.Wagh Inst of Engg Edn & Res Co based sulfur host and interlayer for high- Effect of loading on the mechanical and performance lithium-sulfur batteries electrical response of 18650 cylindrical cells 1600-1615 H2-C20 Ms. Ajay Piriya V.S, IIT Madras H3-C24 Mr. Anandakumar Paramasivam, Development of multivalent rechargeable iron IIITDM Kancheepuram ion battery Effect of preheating on the performance of over-molded short /continuous fiber reinforced polypropylene composite 1615-1630 H2-C21 Mr. Shubhang Srivastava, IIT Madras H3-C25 Mr. Mahender Peddi, IIT Madras Electrochemically active metal oxides as next Processing of lithium ion battery electrodes generation electrode materials for for electric vehicle applications supercapacitors. 1630-1645 H2-C22 Dr. Gurunathan.C, H3-C26 Mr. Vishal Ravisankar. Nagaoka UT IIITDM Kancheepuram Preparation of porous MoO3 for 99Mo/99mTc Wear prediction in light weight network production by a nuclear reinforced composite for tribo applications 1700-1730 Valedictory function