SC-XH70 PPC_eng.book Page 1 Tuesday, December 27, 2011 9:25 AM

Owner’s Manual DVD Home Theater Sound System

Model No. SC-XH70

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference.

If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada:1-800-561-5505

[_P_] [PC] RQT9596-P

until 2012/03/02 SC-XH70 PPC_eng.book Page 2 Tuesday, December 27, 2011 9:25 AM

≥ The illustrations shown may differ from your unit. System SC-XH70 ≥ Operations in these instructions are described mainly with Main unit SA-XH70 the remote control, but you can perform the operations on Speaker Front speakers SB-HF10 the main unit if the controls are the same. system Center speaker SB-HC10 Surround speakers SB-HS10 Subwoofer SB-HW71 Accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (Product numbers are correct as of December 2011. These may be subject to change.) Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 22. For Canada: To order accessories, call the dealer from whom you made your purchase.

∏ 1 Remote control (N2QAYB000694) ∏ Speaker cables ∏ 1 Remote control battery ≥ 3 short cables (REEX1184) 2 long cables (REEX1184A) ∏ 1 FM indoor antenna (RSAX0002) ≥ ∏ 1 AC power supply cord (K2CB2YY00059) ∏ 2 Sheets of speaker cable stickers

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future CAUTION reference. Unit 1 Read these instructions. ≥ This unit utilizes a laser. Use of controls or adjustments or 2 Keep these instructions. performance of procedures other than those specified herein may 3 Heed all warnings. result in hazardous radiation exposure. 4 Follow all instructions. ≥ Do not place sources of naked flames, such as lighted candles, on 5 Do not use this apparatus near water. this unit. 6 Clean only with dry cloth. Placement 7 Do not block any ventilation openings. Install in accordance with ≥ To reduce the risk of fire, electric shock or product damage, the manufacturer’s instructions. – Do not install or place this unit in a bookcase, built-in cabinet or in 8 Do not install near any heat sources such as radiators, heat another confined space. Ensure this unit is well ventilated. registers, stoves, or other apparatus (including amplifiers) that – Do not obstruct this unit’s ventilation openings with newspapers, produce heat. tablecloths, curtains, and similar items. 9 Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the Batteries other. A grounding-type plug has two blades and a third grounding ≥ Danger of explosion if battery is incorrectly replaced. Replace only prong. The wide blade or the third prong are provided for your with the type recommended by the manufacturer. safety. If the provided plug does not fit into your outlet, consult an ≥ Mishandling of batteries can cause electrolyte leakage and may electrician for replacement of the obsolete outlet. cause a fire. 10 Protect the power cord from being walked on or pinched – Do not heat or expose to flame. particularly at plugs, convenience receptacles, and the point where – Do not leave the battery(ies) in a car exposed to direct sunlight for they exit from the apparatus. a long period of time with doors and windows closed. 11 Only use attachments/accessories specified by the manufacturer. – Do not take apart or short circuit. 12 Use only with the cart, stand, tripod, bracket, or – Do not recharge alkaline or manganese batteries. table specified by the manufacturer, or sold with the – Do not use batteries if the covering has been peeled off. apparatus. When a cart is used, use caution when – Remove the battery if you do not intend to use the remote control moving the cart/apparatus combination to avoid for a long period of time. Store in a cool, dark place. injury from tip-over. – When disposing the batteries, please contact your local authorities 13 Unplug this apparatus during lightning storms or or dealer and ask for the correct method of disposal. when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled CAUTION or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has RISK OF ELECTRIC SHOCK been dropped. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC WARNING SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. Unit REFER SERVICING TO QUALIFIED ≥ To reduce the risk of fire, electric shock or product damage, SERVICE PERSONNEL. – Do not expose this unit to rain, moisture, dripping or splashing. The lightning flash with arrowhead symbol, within – Do not place objects filled with liquids, such as vases, on this unit. an equilateral triangle, is intended to alert the user – Use only the recommended accessories. to the presence of uninsulated “dangerous voltage” – Do not remove covers. within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric – Do not repair this unit by yourself. Refer servicing to qualified shock to persons. service personnel. The exclamation point within an equilateral triangle Power cord is intended to alert the user to the presence of ≥ Install this unit so that the power cord can be unplugged from the important operating and maintenance (servicing) socket outlet immediately if any problem occurs. instructions in the literature accompanying the appliance. RQT9596 2 SC-XH70 PPC_eng.book Page 3 Tuesday, December 27, 2011 9:25 AM

TV INPUT  AV VOL  1 2 3  4 5 6 VOL  7 8 9

 CANCEL 0 1010 MUTE 

 DVD RADIO EXT-IN

SEARCH PLAY SEARCH   SKIP SLOW SKIP PAUSE 

STOP FUNCTIONS EXIT   START  U N M E E M N

P U

O

T   OK  PLAY MODE RETURN

 –REPEAT   SOUND SURROUNDCH SELECT FL DISPLAY   –W.SRD –SLEEP 

  MUSIC PORT

1-MIC-2

MUSIC PORT VOL

    

RQT9596 The circled numbers indicated in this Owner’s Manual (e.g. Press [Í]1) correspond to the circled numbers in the above. 3 SC-XH70 PPC_eng.book Page 4 Tuesday, December 27, 2011 9:25 AM

Control reference guide

Remote control Avoiding interference with other Panasonic equipment Other Panasonic audio/video equipment may start functioning when you 1 Turn the main unit on/off (B 8) operate the unit using the supplied remote control. Getting Started 2 Select channels and title numbers etc. / Enter numbers You can operate this unit in another mode by setting the remote control operating mode to “REMOTE 2”. (B 9, 11) 3 Cancel (B 12) The main unit and remote control must be set to the same mode. 1 Press [EXT-IN]4 to select “AUX”. 4 Source select 2 Press and hold [< OPEN/CLOSE]2 on the main unit and [2] on the [DVD]: Select disc as the source (B 11) remote control until the main unit’s display shows “REMOTE 2”. [RADIO]: Select FM tuner (B 9) 3 Press and hold [OK]8 and [2] on the remote control for at least 2 [EXT-IN]: Select external audio as the source ( B 9) seconds. To change the mode back to “REMOTE 1”, repeat the steps above by AUX # ARC # D-IN # MUSIC P. replacing [2] with [1]. ^------} 5 Basic operations for play (B 11) Main unit Playing Discs Playing 6 Show on-screen menu (B 13) 1 Standby/on switch (Í/I) 7 Show a disc top menu (B 11) Press to switch the unit from on to standby mode or vice 8 Select or confirm menu items / Frame-by-frame (B 11) versa. In standby mode, the unit is still consuming a small 9 Select the play mode / Set the repeat mode (B 12) amount of power. : Select sound mode / Turn Whisper-mode Surround on/off 2 Open/Close the disc tray (B 11) (B 10, 11) 3 Disc tray Select surround sound effects (B 10) ; 4 Remote control signal sensor or 5 Display (FL display) Set the Sleep timer 6 Connect external music device (B 15) Press and hold [jSLEEP]. While the time is shown on the main unit’s display, press 7 Adjust the volume of the main unit [jSLEEP] repeatedly. Other Operations Other Each time you press the button: POWER-SAVING FEATURES SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP120 The main unit is designed to conserve its power ^------OFF (Cancel) (------} ≥ To confirm the remaining time, press and hold the button again. consumption and save energy. < TV operations ∫ Auto power-down function Aim the remote control at the Panasonic TV and press the ≥The main unit will automatically switch to standby mode button. after 30 minutes of inactivity. [TV, Í]: Turn the TV on/off e.g. [INPUT, AV]: Change the TV’s video input mode – There is no audio signal from an external device. [ , VOL, ]: Adjust the TV volume Reference r s – Disc playback is stopped/paused. This may not work properly with some models. – The disc menu is displayed and play is not selected. Adjust the volume of the main unit = (This function may not work depending on the application > Mute the sound type of discs.) ≥ “MUTE” flashes on the main unit’s display while the function is on. ≥When the main unit is turned back on, “POWER ON FROM ≥ To cancel, press the button again or adjust the volume. ≥ Mute is cancelled when you switch the unit to standby. AUTO POWER DOWN MODE” appears on the main unit’s ? Select radio stations manually (B 9) display. @ Select preset radio stations (B 9) A Exit the display B Show START menu (B 9) C Show a disc menu (B 11) D Return to previous screen (B 11) E Switch information on the main unit’s display (B 11) F Select speaker channel (B 11) RQT9596

4 SC-XH70 PPC_eng.book Page 5 Tuesday, December 27, 2011 9:25 AM

TABLE OF CONTENTS Getting Started Playing Discs

Accessories ...... 2 Basic play...... 11 IMPORTANT SAFETY INSTRUCTIONS...... 2 Playing from the selected item...... 12 Control reference guide...... 4 Other modes of play ...... 12 Program and Random play ...... 12 POWER-SAVING FEATURES...... 4 Repeat play ...... 12 Using on-screen menus ...... 13

Quick Start Guide Getting Started

step 1 Positioning ...... 6 Other Operations

step 2 Connections ...... 6 Linked operations with the TV Speaker connections...... 6 (VIERA LinkTM “HDAVI ControlTM”) ...... 14 Radio antenna connection...... 7 Setting the audio link ...... 14 Audio and video connections ...... 7 Easy control only with VIERA remote control ...... 15 step 3 AC power supply cord connection ...... 8 Playing from MUSIC PORT ...... 15 step 4 Preparing the remote control ...... 8

Reference Discs Playing step 5 Easy setup...... 8

Listening to the radio...... 9 Changing the player settings ...... 15 Presetting stations automatically ...... 9 Discs that can be played...... 17 Listening to a preset channel ...... 9 Maintenance...... 18 Using the START menu ...... 9 Speaker installation option...... 18 Selecting the source using the remote control ...... 9 Troubleshooting guide ...... 19 Listening to the TV or other device’s audio from this Messages ...... 20 unit’s speakers ...... 10 Licenses ...... 20 Specifications ...... 21

Enjoying sound effects from all speakers Limited Warranty (ONLY FOR U.S.A. AND PUERTO Operations Other RICO) ...... 22 Enjoying surround sound effects...... 10 Selecting sound mode...... 10 Limited Warranty (ONLY FOR CANADA)...... 23 Whisper-mode Surround...... 11 Adjusting the speaker level during playback ...... 11 Adjusting the speaker balance during playback . . .11 Reference RQT9596 5 SC-XH70 PPC_eng.book Page 6 Tuesday, December 27, 2011 9:25 AM

step 1 Positioning step 2 Connections

How you set up your speakers can affect the bass and the sound field. Turn off all equipment before connection and read the appropriate Note the following points: operating instructions. ≥ Place speakers on flat secure bases. Do not connect the AC power supply cord until all other ≥ Keep your speakers at least 10 mm (13/32q) away from the system for connections are completed. proper ventilation. ≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains. Speaker connections ≥ For optional wall mount, refer to page 18. 1

Setup example (“Surround layout (Recommended)”: Standard Cable type Speakers   surround placement) Place the front, center, and surround speakers at approximately the same SUBWOOFER / (Attached to ENCEINTE distance from the seating position. The angles in the diagram are Subwoofer 6 approximate. subwoofer) D’EXTRÊMES- GRAVES

Main unit§1 Center speaker 5 CENTER / CENTRE §2 Center speaker Short Front speaker (R) 2 FRONT / Front speaker (L) 1 AVANT Surround speaker (R) 4 SURROUND / Front speaker Front speaker Long (left) (right) Surround speaker (L) 3 AMBIOPHONIE 60° Use of the speaker cable stickers is convenient when making cable Subwoofer§3 connections. e.g., Surround speaker (L)

120° Speaker cable SURROUND stickers Surround Surround SURROUND  speaker (left) speaker (right)

Long cable §1 Position with at least 5 cm (2q) of space on all sides for proper ventilation.

§2 Place it on a rack or shelf. Vibration caused by the speaker can SURROUND SURROUND disrupt the picture if it is placed directly on the TV. Lch Lch §3 Position it to the right or left of the TV, on the floor or a sturdy shelf so that it will not cause vibration. Leave about 30 cm (1113/16q) from the TV. Verify the type of speaker with the e.g. Depending on the room layout, you may like to use all the speakers at the label on the speaker before connecting front (“Front layout (Alternative)”) (B 8, Easy setup). the appropriate cable.

 Notes on speaker use ≥Use only supplied speakers Using other speakers can damage the unit, and sound quality will be negatively affected. ≥ You can damage your speakers and shorten their lifespan if you play Connect the speaker cables to the appropriate speakers by referring to sound at high levels over extended periods. the above table. ≥ Reduce the volume in the following cases to avoid damage: Insert the wire fully, taking care not to insert beyond the wire insulation. – When playing distorted sound. Be careful not to cross (short circuit) or reverse the polarity of the – When the speakers are reverberating due to a record player, noise speaker wires as doing so may damage the speakers. from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument. i: White – When adjusting the sound quality. j: Blue line Push! – When turning the unit on or off.

If irregular coloring occurs on your TV Main unit (rear) The center speaker is designed to be placed close to a TV, but the picture may be affected on some TVs and setup combinations. If this occurs, turn the TV off for about 30 minutes. The demagnetizing function of the TV should correct the problem. If it White persists, move the speakers further away from the TV. Caution Blue ≥ The main unit and supplied speakers are to be line used only as indicated in this setup. Failure to do  6 5 2 1 4 3 so may lead to damage to the amplifier and/or the 5 5 R 5 L R 5 L speakers, and may result in the risk of fire. SUBWOOFERSUBWOOFER CENTERCENTER FRONTFRONT SURROUNDSURROUND Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. ≥ Do not attempt to attach these speakers to walls using methods other than those described in this manual. White

Push! Blue line Surround speaker (L) RQT9596 6 SC-XH70 PPC_eng.book Page 7 Tuesday, December 27, 2011 9:25 AM

2 Radio antenna connection ∫ Connection without an ARC compatible TV

Main unit (rear) OPTICAL AV IN OUT Affix this end of the antenna to a wall or pillar where the reception is best. TV FM ANT (75 ) Optical digital FM indoor antenna HDMI cable audio cable (supplied) (not supplied) (not supplied)

Getting Started Use an FM outdoor antenna if radio reception is poor. DIGITAL AUDIO IN HDMI AV OUT AV OPTICAL Audio and video connections OUT DIGITAL AUDIO IN 3 (ARC) OPTICAL ≥ To listen to the TV audio on the sound system, connect the optical Main unit (rear) digital audio cable, HDMI§ cable or audio cable. Refer to the operating instructions of the respective devices for the settings necessary to output the audio. Alternative connection to a TV § Only when connecting to an ARC compatible TV. Refer to “Connection with an ARC compatible TV” for details. (B below) ≥ Use this video connection if the TV’s HDMI input terminal is not available. Recommended connection to a TV Guide Quick Start

This connection provides the best picture and audio quality. VIERA Link “HDAVI Control” TV If your Panasonic TV is VIERA Link compatible, you can operate your TV synchronizing with home theater operations or vice versa VIDEO IN (B 14, Linked operations with the TV).

≥ Use the High Speed HDMI Cables. ≥ Non-HDMI-compliant cables cannot be utilized. Audio cable Video cable ≥ It is recommended that you use Panasonic’s HDMI cable. Recommended (not supplied) (not supplied) part number: RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30 (3.0 m/9.8 ft), RP-CDHS50 (5.0 m/16.4 ft), etc. L ≥ Do not make the video connections through the VCR.

Due to copy guard protection, the picture may not be displayed properly. R VIDEO OUT § DIGITALDIGITAL AAUDIOUDIO IINN ≥ After connecting with the optical digital audio cable or HDMI cable, make AUX OPTICALOPTICAL VIDEO OUT settings to suit the type of audio from your digital equipment (B 10). AUX (Only Dolby Digital and PCM can be played with this connection.) Main unit (rear) ∫ Connection with an ARC compatible TV What is ARC? Set Top Box (cable/satellite/Blu-ray Disc player, etc) connection ARC is an abbreviation of Audio Return Channel, also known as HDMI Use this connection when you want to output the original surround audio ARC. It refers to one of the HDMI functions. If the TV is ARC from your STB, etc. to this unit. compatible, audio from the TV can be sent to this unit via the HDMI Connect the optical digital audio cable (not supplied) from the cable without the need to make an extra audio connection. DIGITAL AUDIO IN OPTICAL terminal on the main unit to the ≥ Refer to the operating instructions of the TV for details. OPTICAL OUT terminal on your STB. ≥ If the DIGITAL AUDIO IN OPTICAL terminal is already in use for the TV Be sure to connect to the audio, reconnect the TV audio to the AUX terminal using an audio

HDMI TV’s ARC compatible cable. (ARC) terminal. (Refer to the operating instructions for TV the TV.) If you have various sound sources (such as Blu-ray Disc player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV output should then be connected to the AUX, HDMI AV OUT§ or DIGITAL AUDIO IN OPTICAL terminal of the main unit. HDMI cable (not supplied)

HDMI (ARC) AV OUT AV OUT (ARC)

Main unit (rear) RQT9596 7 SC-XH70 PPC_eng.book Page 8 Tuesday, December 27, 2011 9:25 AM

step 3 AC power supply cord connection step 5 Easy setup The Easy setup screen assists you in making necessary To household AC outlet settings. (AC 120 V, 60 Hz) Preparation Turn on your TV and select the appropriate video input mode AC power supply cord (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connection to this unit. (supplied) ≥ To change your TV’s video input mode, refer to its operating instructions.

AC IN ≥ This remote control can perform some basic TV operations (B 4). Main unit (rear) Press [Í]1 to turn on the unit. Conserving power 1 The main unit consumes a small amount of power, even when it is in ≥ The Easy setup screen appears automatically. standby mode (approx. 0.4 W). To save power when the unit is not to be Press [3, 4]8 to select “Yes” and press [OK]8. used for a long time, unplug it from the household AC outlet. 2 You will need to reset some memory items when plugging back the main 3 Follow the messages and make the settings with unit. [3, 4, 2, 1]8 and [OK]8. ≥Language

Select the language used on menu screen. The supplied AC power supply cord is for use with the main unit only. ≥TV aspect Do not use it with other equipment. Also, do not use cords from other equipment with the main unit. Select the aspect to suit your TV. ≥Speaker layout Select “Surround layout (Recommended)” mode or “Front layout step 4 Preparing the remote control (Alternative)” mode according to your speaker layout (B 6, Positioning). ≥Speaker check  Insert so the poles (r and j) match those in the remote control. Listen to speaker output to confirm speaker connections. ≥Speaker output Make surround sound setting for speaker output. ≥TV audio Select the audio input connection from your TV.  Press in and lift up. For AUX connection (B 7): Select “AUX”. For HDMI connection (B 7): Select “ARC”. For DIGITAL AUDIO IN OPTICAL connection (B 7): Select R6/LR6, AA “DIGITAL IN”. This will be the TV audio setting for VIERA Link “HDAVI Control”.  Replace the cover. (B 14) Press [OK]8 to finish the “Easy setup”. ≥ Use alkaline or manganese batteries. 4

Use ≥ You can perform this setup anytime by selecting “Easy setup” in the Setup Aim at the remote control signal sensor (B 4), avoiding obstacles. menu. (B 17) Distance: Within approx. 7 m (23 ft) ≥ If this unit is connected to a “HDAVI Control 3 or later” compatible TV via Angle: Within approx. 20° up and down, approx. 30° to the left and right HDMI cable, the menu language and TV aspect information will be retrieved via VIERA Link. ≥ If this unit is connected to a “HDAVI Control 2” compatible TV via HDMI cable, the menu language information will be retrieved via VIERA Link. RQT9596 8 SC-XH70 PPC_eng.book Page 9 Tuesday, December 27, 2011 9:25 AM

Listening to the radio Using the START menu

You can preset up to 30 channels. You can select desired source, change the settings, access playback/ The radio settings will be shown on the unit's display. (Some settings are menus, etc., by using the START menu. also indicated on the TV screen.) 1 Press [START]B to show the START menu. Preparation ≥ When using VIERA Link “HDAVI Control”, the TV also turns on Make sure that the FM antenna is connected. (B 7) when the START menu is displayed. Presetting stations automatically e.g. DVD/CD Home theater 1 Press [RADIO]4 to select “FM”.

Input select

Press [MENU]C to select “LOWEST” or “CURRENT”. Getting Started 2 Setup LOWEST: To begin auto preset with the lowest frequency (FM 87.9 or FM 87.5). Press [3, 4]8 to select an item and press [OK]8. CURRENT: 2 ≥ To exit, press [START]B. To begin auto preset with the current frequency.§ Press [ , , , ] to make the setting and press § To change the frequency, refer to “Manual tuning and presetting”. 3 3 4 2 1 8 [OK]8. 3 Press and hold [OK]8. Release the button when “FM AUTO” is displayed. When “Input select” is selected You can select a desired source from the menu. The tuner starts to preset all the stations it can receive into the ≥ DVD/CD (B 11), FM RADIO (B left), AUX§1 (B below), channels in ascending order. ARC§1 (B below), DIGITAL IN§1, 2 (B below), MUSIC PORT (B 15) §1 “(TV)” will appear beside “AUX”, “ARC” or “DIGITAL IN”, indicating the TV audio setting for VIERA Link “HDAVI Control” (B 14). Listening to a preset channel Guide Quick Start §2 “(STB)” will appear beside “DIGITAL IN”, indicating the STB audio setting for VIERA Link “HDAVI Control” (B 14). Press [RADIO]4 to select “FM”. 1 When “Setup” is selected 2 Press the numbered buttons to select the channel. You can change the settings for this unit. (B 15) ≥ To select a 2-digit number Other selectable items e.g. 12: [S10]2 B [1] B [2] The items that are displayed will vary depending on the media and source. Alternatively, press [X, W]@. When a disc is loaded, you can also access playback or menus from the START menu. Manual tuning and presetting e.g. [DVD-V]

Select a radio broadcast. DVD/CD Home theater 1 Press [RADIO]4 to select “FM”. Playback Disc TOP MENU(DVD) Playback/menu access 2 Press [SEARCH6, SEARCH5]? to select the frequency. MENU(DVD) ≥To start automatic tuning, press and hold [SEARCH6, SEARCH5]? until the frequency starts scrolling. Tuning stops Input select Setup when a station is found. To preset the channel When the on-screen control panel appears e.g. [DVD-V] (when “Playback Disc” is selected from the START menu) 3 While listening to the radio broadcast Press [OK]8. 4 While the frequency is flashing on the display Press the numbered buttons to select the channel.

A station previously stored is overwritten when another station is stored in the same channel preset. You can operate the playback with the indicated controls. Selecting the source using the remote control

Press To select [DVD]4 DVD/CD [RADIO]4 FM (B left) [EXT-IN]4 Each time you press the button: AUX: For audio input through the AUX terminal. ARC: For audio input through the HDMI AV OUT terminal. D-IN: For audio input through the DIGITAL AUDIO IN OPTICAL terminal. (B 10) MUSIC P.: For audio input through the MUSIC PORT. (B 15)

Confirm the audio connection to the AUX, HDMI AV OUT or DIGITAL AUDIO IN OPTICAL terminal on the main unit when you select the corresponding sources (B 7). Reduce the volume on the TV to its minimum, and then adjust the volume of the main unit. RQT9596 9 SC-XH70 PPC_eng.book Page 10 Tuesday, December 27, 2011 9:25 AM

Listening to the TV or other device’s Enjoying sound effects from all audio from this unit’s speakers speakers Preparation ≥ Make sure that there is an audio connection between this unit and the TV or other device. (B 7) ≥ The following sound effects may not be available or may have no effect ≥ Turn on the TV or/and other device. with some sources. ≥ You may experience a reduction in sound quality when these sound Press [EXT-IN]4 to choose the source that is used to effects are used with some sources. If this occurs, turn the sound effects connect this unit to the TV or another device. off. ≥ To change the surround sound effects and sound mode, refer to

Getting Started “Enjoying sound effects from all speakers” (B right). When changing the surround sound effect, Whisper-mode Surround or the ≥ If your Panasonic TV is VIERA Link compatible, refer to “Linked sound modes, the setting is displayed on the TV screen if “DVD/CD” is the operations with the TV” (B 14) for other related functions. selected source during video playback.

Making settings for digital audio input Enjoying surround sound effects Select to suit the type of audio from the DIGITAL AUDIO IN OPTICAL and HDMI AV OUT terminal on the main unit. Press [SURROUND];. ≥ Underlined items are the factory presets. Each time you press the button: Available settings For “Surround layout (Recommended)”§ mode Mode Setting STANDARD: DUAL: (Only works with Dolby Dual Mono) Sound is output as it was recorded/encoded. Speaker output varies depending on the source. – MAIN+SAP (stereo audio) MULTI-CH: Playing Discs Playing –MAIN You can enjoy sound from the front speakers, as well as the surround –SAP speakers and center speaker even when playing stereo sources. “SAP” = Secondary Audio Program MANUAL: (B below) ≥ Set PCM FIX mode to “OFF” to listen to the “MAIN” or “SAP” audio. While “MANUAL” is displayed, press [2, 1]8 to select DRC: –ON other surround modes. (Dynamic Adjust for clarity even when the volume is low by Each time you press [2, 1]8: Range compressing the range of the lowest sound level and DOLBY PLII MOVIE Compression) the highest sound level. Convenient for late night Suitable for movies, or videos recorded in Dolby Surround. viewing. (Only works with Dolby Digital) DOLBY PLII MUSIC –OFF Adds 5.1-channel effects to stereo sources. The full dynamic range of the signal is reproduced. S.SRD (Super Surround) You can enjoy sound from all speakers with stereo sources. PCM FIX: – ON STEREO Select when receiving only PCM signals. Sound will only be output to the front speakers and the subwoofer from –OFF any source. Select when receiving Dolby Digital and PCM signals. Other Operations Other ≥ When receiving true 5.1-channel surround sound, Recommended modes to enjoy TV audio or stereo select “OFF”. sources from all speakers: STB§: –SET “MULTI-CH”, “DOLBY PLII MOVIE”, “DOLBY PLII MUSIC” or “S.SRD” (CABLE/SAT Select when setting the main unit to switch to AUDIO) “D-IN” when the input channel of an HDMI connected For “Front layout (Alternative)”§ mode device (STB, etc.) is selected on the TV (B 14, STANDARD: Setting the audio link with the STB). Stereo source is output as 2.1-channel audio. –OFF When playing surround sources, you can enjoy 5.1-channel Select to cancel this setting. surround-like effect even with all the speakers at the front. STEREO: 1 Press [EXT-IN]4 several times to select “D-IN” or You can play any source in stereo. Surround sound effect is Reference “ARC”. unavailable. A.SRD (Advanced Surround): Press [PLAY MODE]9 and then [3, 4]8 to select the 2 You can enjoy surround effect with any audio source. mode. When the signal is DTS or Dolby Digital, “/DTS” or “/DOLBY DIGITAL” will 3 While the selected mode is displayed, press [2, 1]8 to also be displayed respectively. select the desired setting. § Selected mode in “Speaker layout” (B 8, Easy setup). § Only when “D-IN” is selected. Be sure to select the device’s (STB, etc.) input channel on the TV when making the setting. Selecting sound mode The device must be connected to the Panasonic TV via an HDMI cable and to this unit with an optical digital audio cable. 1 Press [SOUND]: to select a sound mode. ≥If the device’s (STB, etc.) input channel on the TV is changed or if you Each time you press the button: want to change the device allocated for the linked operations, select EQ: Equalizer the “STB” mode to “OFF” in step 3 above and then select “SET” SUBW LVL: Subwoofer Level again. C.FOCUS: Center Focus (Only when “Surround layout ≥This function will not operate if “DIGITAL IN” is selected in “TV Audio” (Recommended)” mode is selected in “Speaker (B 16). layout” (B 8, Easy setup).) 2 While the selected mode is displayed, press [2, 1]8 to make the settings. Refer to the following for setting details of each sound effect. RQT9596 10 SC-XH70 PPC_eng.book Page 11 Tuesday, December 27, 2011 9:25 AM

EQ (Equalizer) You can select sound quality settings. Basic play Each time you press [2, 1]8: FLAT: Cancel (no effect is added). Preparation HEAVY: Adds punch to rock. To display the picture, turn on your TV and change its video input mode CLEAR: Clarifies higher sounds. (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connection to this unit. SOFT: For background music. Press [Í]1 to turn on the unit. SUBW LVL (Subwoofer level) 1 You can adjust the amount of bass. The unit automatically selects Press [DVD]4 to select “DVD/CD”. the most suitable setting according to the type of playback 2 source. Press [< OPEN/CLOSE]2 to open the disc tray. LEVEL 1 ,# LEVEL 2 ,# LEVEL 3 ,# LEVEL 4 3 ^------J ≥ The setting you make is retained and recalled every time you Load the disc. Label facing up 4 Getting Started play the same type of source. ≥ Load double-sided discs so the label for the side you want to play is facing up. C.FOCUS (Center Focus) (Effective when playing audio containing the center channel sound or when DOLBY PLII (B 10) is selected.) You can make the sound of the center speaker seem like it is coming from within the TV. 5 Press [1 PLAY]5 to start play. ON ,------. OFF ≥ Press [r, VOL, s]= to adjust the volume.

Whisper-mode Surround ≥ When you press [< OPEN/CLOSE]2 to close the disc tray, this unit You can enhance the audio effect for low volume 5.1-channel sound. automatically starts playing the disc in the tray. (Convenient for late night viewing.) [MP3] [JPEG] – Only the contents in the current group will be played. Playing Discs Playing Press and hold [–W.SRD]: to show the current setting. – If there are both MP3 and JPEG contents in the current group, only While the current setting is displayed, press [–W.SRD]: to change the one content type will be played. (Priority: MP3 contents will be setting. played.) You can select an item of your desired content type to start play. ON ,------. OFF (B 12, Using navigation menu) ≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Adjusting the speaker level during playback Press [∫ STOP]5 when you finish to preserve the unit’s motor and your TV Only when “Surround layout (Recommended)” mode is selected in screen. ≥ Total title number may not be displayed properly on iR/iRW. “Speaker layout” (B 8, Easy setup) (Effective when playing 5.1-channel sound or when DOLBY PLII/“S.SRD” Basic controls (B 10) is selected.) 1 Press [CH SELECT]F to select the speaker. Stop: [∫ STOP]5 Each time you press the button: The position is memorized while “RESUME” is on the main unit’s display. e.g. L# C# R# RS# LS# SW [DVD-V] [VCD] [CD] [MP3] This unit can memorize the resume position for ^------} the last 5 discs. Operations Other ≥ You can adjust SW (Subwoofer) only if the disc includes a ≥ Press [1 PLAY]5 to resume. subwoofer channel. ≥ Press [∫ STOP]5 again to clear the position. ≥ When “S” appears, only the surround speaker channel can be adjusted. Both surround speaker levels will be adjusted at the same Pause: [; PAUSE]5 time. ≥ Press [1 PLAY]5 to restart play. While “C”, “RS”, “LS”, “SW” or “S” is selected 2 Press [3]8 (increase) or [4]8 (decrease) to adjust the Skip: [SKIP:,SKIP9]5 speaker level for each speaker. C, RS, LS, SW, S: `6dB to i6dB Search: [SEARCH6, SEARCH5]5 (during play) (L, R: Only the balance is adjustable.) (B below) Slow-motion: [SEARCH6, SEARCH5]5 (during pause) ≥ Search: Up to 4 steps Reference Adjusting the speaker balance during playback Slow-motion: Up to 3 steps ≥ Press [1 PLAY]5 to start normal play. For “Surround layout (Recommended)”§ mode: ≥ [VCD] Slow-motion: Forward direction only. Front speaker balance For “Front layout (Alternative)”§ mode: [DVD-V] [VCD] Frame-by-frame: [2;, ;1]8 (during pause) Front and surround speaker balance ≥ [VCD] Forward direction only. 1 Press [CH SELECT]F to select “L” or “R”. While “L” or “R” is selected On-screen item select: [3, 4, 2, 1, OK]8 2 Press [2, 1]8 to adjust the speaker balance. [3, 4, 2, 1]8: Select [OK]8: Confirm § Selected mode in “Speaker layout” (B 8, Easy setup). Enter number: Numbered buttons [DVD-V] [VCD] [CD] e.g. To select 12: [S10]2 B [1] B [2]

[DVD-V] Show a disc top menu: [TOP MENU]7 [DVD-V] Show a disc menu: [MENU]C Return to previous screen: [RETURN]D [VCD] (with playback control) Show a disc menu: [RETURN]D Turn PBC function on/off: [MENU]C

Main unit display: [FL DISPLAY]E [DVD-V] [MP3] Time display ,-. Information display [JPEG]

RQT9596 SLIDE,-.Contents number 11 SC-XH70 PPC_eng.book Page 12 Tuesday, December 27, 2011 9:25 AM

Playing from the selected item Program play (up to 30 items) 1 Press [3, 4]8 to select an item and press [OK]8. Using navigation menu e.g. [MP3]

[CD] [MP3] [JPEG] Music Program .. 1 You can select to play from your desired item while the navigation menu Track 1 2 screen is displayed. Track 2 3 Track 3 4 e.g. Data disc Track 4 5 6 Group (Folder): Elapsed time ≥ When a content is selected, it will be programmed. Content (File/Track): 00:02:40 ≥ Repeat this step to program other items. / .../Underwater.MP3 : MP3/CD-DA 1/3 ≥ [MP3] [JPEG] To return to the previous folder, press [RETURN]D. .. You can also do this by selecting “ ” in the menu. Perfume ..

Getting Started : JPEG Underwater Fantasy planet Press [1 PLAY]5 to start play. Starpersons1 2

Press [3, 4]8 to select an item and press [OK]8. To clear the selected program ≥ Press [2, 1]8 to skip page by page. 1Press [1]8 and then press [3, 4]8 to select the program. Play starts from the selected content. 2Press [CANCEL]3. To clear the whole program [MP3] [JPEG] Press [ ] several times to select “Clear All”, and then press [OK] . ≥ To return to the previous folder, press [RETURN]D. You can also do 1 8 8 this by selecting “.. ” in the menu. The whole program is also cleared when the disc tray is opened, the unit is turned off or another source is selected. ≥ Maximum: 16 characters for file/folder name. ≥ Only the contents in the current group will be played. Random play ≥ If there are both MP3 and JPEG contents in the current group, play will

Playing Discs Playing be based on the selected content type. [CD] All tracks will be played in random order. Selecting the picture in Thumbnail menu Press [1 PLAY]5 to start play. [JPEG] [MP3] [JPEG] The MP3/JPEG contents of the selected group will be played 1 While the picture is displayed, press [TOP MENU]7 to in random order. show the thumbnail menu. 1 Press [3, 4]8 to select the desired group and press e.g. [OK]8. e.g. [MP3]

RND 1/10 / .../Track 1.MP3 .. Track 1 Track 2 Track 3 Press [3, 4, 2, 1]8 to select a picture and press Track 4 2 ≥ To return to the previous folder, press [RETURN]D. You can also do

Other Operations Other [OK]8. this by selecting “.. ” in the menu. ≥ Press [SKIP:, SKIP 9]5 to skip page by page. Press [3, 4]8 to select the desired content§ and press Rotating a picture 2 ∫ [OK]8. While a picture is displayed, press [3, 4, 2, 1]8 to rotate the Play starts from the selected content. picture. § If there are both MP3 and JPEG contents, random play will be based on the selected content type. Other modes of play Repeat play Program and Random play This works only when the elapsed play time can be displayed. It also

Reference works with all JPEG content. [CD] [MP3] [JPEG] During play, press and hold [–REPEAT]9, to show the Preparation repeat mode. While stopped, press [PLAY MODE]9 to select the play While the repeat mode is displayed, press [–REPEAT]9 to select the mode. item to be repeated. Each time you press the button: e.g. [DVD-V] [CD] [MP3] Music Program menu `Chapter ---. `Title ---. `Off [JPEG] Picture Program menu ^------_------b RND (Random) menu To cancel, select “Off”. Exit program and random menus Items shown differ depending on the type of disc and playback mode.

Random mode will be cleared when you change the repeat mode. RQT9596 12 SC-XH70 PPC_eng.book Page 13 Tuesday, December 27, 2011 9:25 AM

Using on-screen menus Play Speed

Press [FUNCTIONS]6 to show the on-screen menu. [DVD-V] 1 To change play speed Each time you press the button: – from “k0.6” to “k1.4” (in 0.1-unit steps) Menu 1 (Disc) e.g. [DVD-V] Menu 1 (Disc) ≥ Press [1 PLAY]5 to return to normal play. Menu 2 (Video) Current item ≥ After you change the speed Menu 3 (Audio) – Dolby Pro Logic II has no effect. Exit T 1 C1 1/5 D 5 – Audio output switches to 2-channel stereo. Off O – Sampling frequency of 96 kHz is converted to 48 kHz. Title Search ≥ This function does not work with DTS source. The play speed will return to “k1.0”. Item name ≥ This function may not work depending on the disc’s recording. 2 Press [3, 4, 2, 1]8 to select the item and press Getting Started [OK]8. Repeat Mode e.g. [DVD-V] Menu 1 (Disc) Current setting (B 12, Repeat play) T 1 C1 1/5 D 5 A-B Repeat (To repeat a specified section) Off O Except [JPEG] Chapter Search Press [OK]8 at the starting and ending points. ≥ Select “Off” to cancel. 3 Press [3, 4]8 to make the settings and press [OK]8. Subtitle

This does not work during HD JPEG playback (B 16, HD JPEG Mode [JPEG]) [DVD-V] (with multiple subtitles) Discs Playing To select subtitle language Items shown will vary depending on the type of disc. ≥ On iR/iRW, a subtitle number may be shown for subtitles that are not displayed.

Menu 1 (Disc) Angle Track Search, Title Search, Content Search, Chapter Search [DVD-V] (with multiple angles) To select a video angle To start from a specific item e.g. [DVD-V]: T2 C5 Menu 2 (Video) To select 12: [S10]2 B [1] B [2] B [OK]8 Transfer Mode Audio To select the method of conversion for video output to suit the type [DVD-V] (with multiple soundtracks) of material To select audio soundtrack Auto, Video [VCD] ≥ When the content is distorted, select “Video”. To select “L”, “R”, “L+R” or “L R” ≥ This may have no effect with some sources. Actual operations depend on the disc. Read the disc’s instructions for details. Zoom

Signal type/data LPCM/ D/DTS/MPEG: Signal type To select zoom Normal, 1, 2, 3 Reference

Menu 3 (Audio)

Dialog Enhancer

To make the dialog in movies easier to hear [DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialog recorded in the center channel) Off, On

RQT9596 13 SC-XH70 PPC_eng.book Page 14 Tuesday, December 27, 2011 9:25 AM

Auto input switching Linked operations with the TV (Power on link) (VIERA LinkTM “HDAVI ControlTM”) When the following operations are performed, the TV will automatically switch the input channel and display the corresponding action. Additionally when the TV is off, the TV will automatically turn on: What is VIERA Link “HDAVI Control”? – When play starts on the unit VIERA LinkTM is a new name for EZ SyncTM. – When an action that uses the display screen is performed (e.g., START VIERA Link “HDAVI Control” is a convenient function that offers linked menu) operations of this unit, and a Panasonic TV (VIERA) under “HDAVI ≥ When you switch the TV input to TV tuner mode or the STB input Control”. You can use this function by connecting the equipment with channel, this unit will automatically switch to “AUX”§2, “ARC”§1, 2 or the HDMI cable. See the operating instructions for connected “D-IN”§2, 3. equipment for operational details. ≥ When you start disc play, the TV will automatically switch its input mode for this unit. Preparation Getting Started Power off link ≥ Confirm that the HDMI connection has been made (B 7). 1 Set “VIERA Link” to “On” (B 16). All connected equipment compatible with “HDAVI Control”, including this (The default setting is “On”.) unit, automatically turn off when you switch the TV off. 2 Set the “HDAVI Control” operations on the connected equipment To continue audio playback even when the TV is turned off, select “Video” (e.g., TV). (B 16, “Power Off Link” in HDMI menu). 3 Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control” function will work properly. When you press [Í]1, only this unit turns off. Other connected equipment Whenever the connection or settings are changed, repeat this compatible with VIERA Link “HDAVI Control” stays on. procedure and reconfirm the points in “Setting the audio link” For details, refer also to the operating instructions for your TV. (B below). Speaker selection Setting the audio link Playing Discs Playing You can select whether audio will output from this unit’s speakers or the TV speakers by using the TV menu settings. For details, refer to the ∫ Setting the audio link with the TV operating instructions for your TV. Select “AUX”, “ARC”§1 or “DIGITAL IN” for TV audio link. Home theater Refer to TV audio setting in Easy setup (B 8) or “TV Audio” in HDMI This unit’s speakers are active. menu (B 16). ≥ When you turn on this unit, this unit’s speakers will be automatically Confirm the TV audio connection to the AUX terminal (for “AUX”), HDMI activated. AV OUT terminal (for “ARC”§1) or DIGITAL AUDIO IN OPTICAL terminal ≥ When this unit is in standby mode, changing the TV speakers to this (for “DIGITAL IN”) on the main unit (B 7). unit’s speakers in the TV menu will automatically turn this unit on and select “AUX”§2, “ARC”§1, 2 or “D-IN”§2, 3 as the source. ∫ Setting the audio link with the STB ≥ The TV speakers are automatically muted. Select “D-IN” for STB audio link. ≥ You can control the volume setting using the volume or mute button on Refer to STB setting in “Making settings for digital audio input” (B 10). the TV’s remote control. (The volume level is displayed on the main Confirm the STB audio connection to the DIGITAL AUDIO IN OPTICAL unit’s display.) terminal (for “D-IN”) on the main unit (B 7). ≥ To cancel muting, you can also use this unit’s remote control (B 4).

Other Operations Other ≥ If you turn off this unit, TV speakers will be automatically activated. TV ≥ VIERA Link “HDAVI Control”, based on the control functions provided by TV speakers are active. HDMI which is an industry standard known as HDMI CEC (Consumer ≥ The volume of this unit is set to “0”. Electronics Control), is a unique function that we have developed and added. – This function works only when “DVD/CD”, “AUX”§2, “ARC”§1, 2 or As such, its operation with other manufacturers’ equipment that supports “D-IN”§2, 3 is selected as the source on this unit. HDMI CEC cannot be guaranteed. ≥ Audio output is 2-channel audio. ≥ This unit supports “HDAVI Control 5” function. “HDAVI Control 5” is the newest standard (current as of November, 2011) for Panasonic’s HDAVI Control compatible equipment. This standard is When switching between this unit speakers and TV speakers, the TV screen compatible with Panasonic’s conventional HDAVI equipment. may go blank for several seconds. ≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function. Reference §1 The selection works only when using an ARC compatible TV. Auto lip-sync §2 “AUX”, “ARC” or “D-IN” (DIGITAL IN) works depending on the TV (For “HDAVI Control 3 or later”) audio setting (B left, Setting the audio link with the TV). This function automatically provides synchronized audio and video §3 “D-IN” (DIGITAL IN) works depending on the STB audio setting output. (This works only when the source is “DVD/CD”, “AUX”§2, (B left, Setting the audio link with the STB). “ARC”§1, 2 or “D-IN”§2, 3.) ≥ When using “DVD/CD” as the source, set “Time Delay” in Video menu to “0ms/Auto” (B 16). RQT9596 14 SC-XH70 PPC_eng.book Page 15 Tuesday, December 27, 2011 9:25 AM

Easy control only with VIERA remote control Changing the player settings (For “HDAVI Control 2 or later”) You can control the playback menus of this unit with the TV’s remote control. When operating the TV’s remote control, refer to the below 1 Press [DVD]4 to select “DVD/CD”. illustration for operation buttons. 1 Select this unit’s operation menu by using the TV menu settings. 2 Press [START]B to show the START menu. (For details, refer to the operating instructions for your TV.) The START menu will be shown. Press [3, 4]8 to select “Setup” and press [OK]8. e.g. [DVD-V] 3 Item

DVD/CD Home theater Setup Playback Disc TOP MENU(DVD) Playback/menu access Language Display : English MENU(DVD) Video Audio : English

Subtitle : Off Getting Started Input select Audio DVD Menu : English Setup HDMI ≥ The START menu can also be shown by using a button on the TV’s Others remote control (e.g. [SUB MENU]). Set – When “DVD/CD” is selected as the source, the TV’s remote control RETURN works only during stop mode. Menu Current setting 2 Select the desired item on the START menu (B 9). Press [3, 4]8 to select menu and press [OK]8. When the on-screen control panel appears 4 e.g. [DVD-V] (when “Playback Disc” is selected from the START menu.) 5 Press [3, 4]8 to select the item and press [OK]8. Press [3, 4]8 to make the settings and press [OK]8.

6 Discs Playing ≥ To return to the previous screen, press [RETURN]D. ≥ To exit the screen, press [START]B. ≥ The settings remain intact even if you switch the unit to standby. You can operate the playback with the indicated controls. ≥ Underlined items are the factory settings in the following menus. ≥ The on-screen control panel can also be shown by using a button on the TV’s remote control (e.g. [SUB MENU]). Language menu – This works only during “DVD/CD” playback and resume modes. Display ≥ Depending on the menu, some button operations cannot be performed from Choose the language for the on-screen messages. the TV’s remote control. ≥ English ≥ Français ≥ Español ≥ You cannot input numbers with the numbered buttons on the TV’s remote control ([0] to [9]). Use this unit’s remote control to select the play list etc. Audio§ Choose the audio language.

Playing from MUSIC PORT ≥ English ≥ French ≥ Spanish Operations Other

The MUSIC PORT allows you to connect and enjoy music from an Subtitle§ external music device (e.g. MP3 player) through your home theater Choose the subtitle language. system. ≥ Auto ≥ English ≥ French ≥ Spanish Preparation ≥ Off ≥ To avoid distorted sound, make sure that any equalizer function of your external device is turned off. ≥ Reduce the volume of the main unit and external music device. DVD Menu§ Choose the language for disc menus. Connect the external music device (not supplied) to the ≥ English ≥ French ≥ Spanish 1 Reference MUSIC PORT . 6 § Some discs start in a certain language despite any changes you make Plug type: ‰3.5 mm (1/8q) stereo mini plug here. When the selected language is not available on the disc, the default Press [EXT-IN]4 to select “MUSIC P.”. language is played. There are discs where you can only switch the 2 language from the menu screen (B 11).

Adjust the volume on the external music device to a normal listening level, and then adjust the volume of the main unit. Video menu TV Aspect Choose the setting to suit your TV. ≥ 16:9: Widescreen TV (16:9) ≥ 4:3 Pan&Scan: Regular aspect TV (4:3) The sides of the widescreen picture are cut off so it fills the screen (unless prohibited by the disc).

≥ 4:3 Letterbox: Regular aspect TV (4:3) Widescreen picture is shown in the letterbox style.

RQT9596 15 SC-XH70 PPC_eng.book Page 16 Tuesday, December 27, 2011 9:25 AM

Time Delay Speaker Settings When connected with a Plasma display, adjust if you notice the audio is Select the delay time of the speakers. out of sync with the video. (Effective only when “Surround layout (Recommended)” mode is selected ≥ 0ms/Auto ≥ 20ms ≥ 40ms ≥ 60ms in “Speaker layout” (B 8, Easy setup).) (Center and surround speakers only) ≥ 80ms ≥ 100ms For optimum listening with 5.1-channel sound, all the speakers, except for When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later” the subwoofer, should be the same distance from the seating position. compatible TV (B 14), select “0ms/Auto”. If you have to place the center or surround speakers closer to the seating Audio and video will automatically be set in sync. position, adjust the delay time to make up for the difference.

Video Resolution C : Actual speaker position L C R This works only when the HDMI connection is being used. : Ideal speaker position Select suitable picture quality for your TV. SW    : Primary listening Getting Started (Video recordings will be converted to, and output as, high-definition video.)  distance ≥ Auto ≥ 480i ≥ 480p ≥ 720p LS RS Approximate room dimensions ≥ 1080i ≥ 1080p LS RS Ensure that your TV can support the resolution that you choose. If a message screen appears, confirm your selection by pressing Circle of constant primary listening distance [2, 1]8 to select “Yes” and press [OK]8. If the picture is distorted, wait for 15 seconds or press [2, 1]8 to select “No”. To accept the setting, If either distance a or b is less than c, find the difference in the table select “Yes” again. and change to the recommended setting. a Center speaker b Surround speaker HD JPEG Mode [JPEG] Difference (Approx.) Setting Difference (Approx.) Setting (This works only when using HDMI connection with “Video Resolution” 30 cm (1 foot) 1ms 150 cm (5 feet) 5ms

Playing Discs Playing (B above) set to “Auto”, “720p”, “1080i” or “1080p”.) 60 cm (2 feet) 2ms 300 cm (10 feet) 10ms ≥ On: HD JPEG playback is available. (JPEG images will be displayed in original resolution.) 90 cm (3 feet) 3ms 450 cm (15 feet) 15ms ≥ Off 120 cm (4 feet) 4ms During HD JPEG playback, there will be no on-screen menus (B 13) and 150 cm (5 feet) 5ms on-screen displays. ≥ C Delay (Center Delay): 0ms, 1ms, 2ms, 3ms, 4ms, 5ms Black Level Select the delay time for your center speaker. ≥ LS/RS Delay (Left Surround/Right Surround Delay): (This works only for video output from the VIDEO OUT terminal.) 0ms, 5ms, 10ms, 15ms Change the black level of the picture. Select the delay time for your surround speakers. ≥ Lighter ≥ Test Tone: ≥ Darker Use the test tone to listen to the speaker output to confirm speaker connections. Audio menu Test tone will be output to each channel in the following order. Other Operations Other Left, Center, Right, Surround Right, Surround Left, Subwoofer Select to suit the type of equipment you connected to the HDMI AV OUT To stop the test tone, press [RETURN]D. terminal. Select “Bitstream” when the equipment can decode the bitstream (digital form of 5.1-channel data). Otherwise, select “PCM”. HDMI menu (If the bitstream is output to the equipment without a decoder, high levels of noise can be output and may damage your speakers and hearing.) VIERA Link Digital Output ≥ On: The VIERA Link “HDAVI Control” function is available (B 14). ≥ Bitstream ≥ PCM ≥ Off When audio output is from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will Audio Out

Reference depend on the performance of this connected equipment. ≥ On: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the connected equipment, audio output may differ from the audio settings of the main unit.) Dynamic Range ≥ Off: When audio output is not from the HDMI AV OUT terminal. (The ≥ On: Adjusts for clarity even when the volume is low. Convenient for audio is output using the settings of the main unit.) late night viewing. (Only works with Dolby Digital) ≥ Off: The full dynamic range of the signal is reproduced. Power Off Link Select the desired power off link setting of this unit for VIERA Link operation (B 14). (This works depending on the settings of the connected VIERA Link “HDAVI Control” compatible equipment.) ≥ Video/Audio: When the TV is turned off, this unit will turn off automatically. ≥ Video: When the TV is turned off, this unit will turn off except during the following conditions: – audio playback ([CD] [MP3]) – radio mode – “AUX”, “ARC” or “D-IN” mode (non-selected TV audio setting for VIERA Link) – “MUSIC P.” mode

TV Audio Select the TV audio input to work with the VIERA Link operations (B 14). ≥ AUX ≥ ARC ≥ DIGITAL IN RQT9596

16 SC-XH70 PPC_eng.book Page 17 Tuesday, December 27, 2011 9:25 AM

Others menu Discs that can be played Slide Show Time Commercial discs Set the speed of the slideshow. ≥ 3 Seconds ≥ 5 Seconds ≥ 10 Seconds ≥ 15 Seconds Type of media/ Logo Remarks Indicated as Easy setup DVD-Video High quality movie and [DVD-V] music discs You can execute basic settings to optimize your home theater system. (B 8)

FL Dimmer Change the brightness of the unit’s display.

≥ Bright Getting Started ≥ Dim: The display is dimmed. Video CD Music discs with video [VCD] ≥ Auto: The display is dimmed, but brightens when you perform Including SVCD some operations. (Conforming to IEC62107)

Screen Saver This is to prevent burn marks on the TV screen. ≥ Off ≥ Wait 5 min: If there is no operation for 5 minutes, the screen saver will be shown. The TV screen will resume when you perform some operations. (This does not work during playback.) CD Music discs [CD]

Ratings Discs Playing Set a rating level to limit DVD-Video play. Setting ratings (When level 8 is selected) ≥ 1 to 7 ≥ 8 No Limit Recorded discs When you select your ratings level, a password screen is shown. The default password is “0000”. Type of media/ Formats Indicated as Enter the 4-digit password with the numbered buttons, and press [OK]8. Logo You can change the default password (B below) DVD-R/RW ≥ DVD-Video Format [DVD-V] Do not forget your password. ≥ MP3 format [MP3] A message screen will be shown if a DVD-Video disc exceeding the rating ≥ JPEG format [JPEG] level is inserted in the unit. Follow the on-screen instructions.

Set Password Operations Other Change the password for “Ratings”. When you change the password for the first time: The default password is “0000”. DVD-R DL ≥ DVD-Video Format [DVD-V] Follow the on-screen instructions.

Restore Default Settings This returns all values in the Setup menu to the default settings except the password and ratings level. Press [2, 1]8 to select “Yes” and press [OK]8. Turn the unit off and on again. rR/rRW/rRDL ≥iVR (iR/iRW Video [DVD-V]

Recording) Format Reference CD-R/RW ≥ CD-DA format [CD] ≥ MP3 format [MP3] ≥ JPEG format [JPEG] ≥ Before playback, finalize the disc on the device it was recorded on. ≥ It may not be possible to play all the above-mentioned discs in some cases due to the type of disc, the condition of the recording, the recording method, or how the files were created (B 18, Tips for making data discs).

Note about using a DualDisc The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.

Discs that cannot be played

Blu-ray Discs, HD DVD, AVCHD discs, DVD-RW version 1.0, DVD-Audio, DVD-ROM, DVD-VR, CD-ROM, CDV, CD-G, SACD, WMA discs, DivX discs and Photo CD, DVD-RAM, and “Chaoji VCD” available on the market including CVD, DVCD and SVCD that do not conform to IEC62107.

RQT9596 17 SC-XH70 PPC_eng.book Page 18 Tuesday, December 27, 2011 9:25 AM

Region number [DVD-V] Speaker installation option The player plays DVD-Video marked with labels containing the region number “1” or “ALL”. Attaching to a wall e.g. You can attach all of the speakers (except subwoofer) to a wall. 1 ≥ The wall or pillar on which the speakers are to be attached should be 1 ALL 2 capable of supporting 10 kg (22 Ibs) per screw. Consult a qualified 4 building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers, and Disc handling precautions personal injury. ≥ Do not attach labels or stickers to discs. This may cause disc warping, 1 Drive a screw (not supplied) into the wall. rendering it unusable. Getting Started ≥ Do not write on the label side with a ball-point pen or other writing 3 At least 30 mm (1 /16q) instrument. ≥ Do not use record cleaning sprays, benzine, thinner, liquids which prevent static electricity, or any other solvent. ‰4.0 mm (5/32q) ≥ Do not use scratch-proof protectors or covers. ‰7.0 mm to ‰9.4 mm 9 3 ≥ Do not use the following discs: ( /32q to /8q) – Discs with exposed adhesive from removed stickers or labels (rented Wall or pillar 7 5 discs, etc.). 5.5 mm to 7.5 mm ( /32q to /16q) – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart shapes. 2 Fit the speaker securely onto the screw(s) with the hole(s). Tips for making data discs e.g., Surround speaker

Playing Discs Playing [MP3] (Extension: “.MP3”, “.mp3”) DO NOT DO Disc: DVD-R/RW, CD-R/RW ≥ Sampling frequency and compression rate: 8 kHz, 11.02 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz (8 kbps to 160 kbps), 32 kHz, 44.1 kHz and 48 kHz (32 kbps to 320 kbps) ≥ ID3 tags: version 1, 2 ≥ In this position, the speaker will ≥ Move the speaker so that the likely fall if moved to the left or screw is in this position. [JPEG] (Extension: “.JPG”, “.jpg”, “.JPEG”, “.jpeg”) right. Disc: DVD-R/RW, CD-R/RW ≥ JPEG files taken on a digital camera that conform to DCF Standard ∫ Tips (Design rule for Camera File system) Version 1.0 are displayed. Use the measurements indicated below to identify the screwing positions – Files that have been altered, edited or saved with computer picture on the wall. editing software may not be displayed. 25 ≥ Leave at least 20 mm ( /32q) of space above the speaker and ≥ This unit cannot display moving pictures, MOTION JPEG and other 13 10 mm ( /32q) on each side to allow enough space for fitting the speaker. such formats, still pictures other than JPEG (e.g. TIFF), or play pictures with attached audio. Front/Surround speaker Center speaker Other Operations Other   ≥ There may be differences in the display order on the menu screen and    computer screen.  ≥ This unit cannot play files recorded using packet write.  DVD-R/RW ≥ Discs must conform to UDF bridge (UDF 1.02/ISO9660).   ≥ This unit does not support multi-session. Only the default session is played. CD-R/RW 23 ≥ Discs must conform to ISO9660 level 1 or 2 (except for extended A 18 mm ( /32q) 29 formats). B 99 mm (3 /32q)

Reference 9 ≥ This unit supports multi-session but if there are many sessions it takes C 40 mm (1 /16q) 9 more time for play to start. Keep the number of sessions to a minimum D 40 mm (1 /16q) to avoid this.

Maintenance E 17 mm (21/32q) 17 F 64 mm (2 /32q) 15 G 24 mm ( /16q) Clean this unit with a soft, dry cloth H 96 mm (325/32q) ≥ Never use alcohol, paint thinner or benzine to clean this unit. I 27 mm (11/16q) ≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth. ∫ To prevent speakers from falling Do not use commercially available lens cleaners as they may cause Front speaker, Surround speaker, Center speaker malfunction. Cleaning of the lens is generally not necessary although this depends on the operating environment. e.g. Front speaker

Before moving the unit, ensure the disc tray is empty. Failure to String (not supplied) do so will risk severely damaging the disc and the unit. Screw eye (not supplied)

Less than 15 Wall 10 cm (3 /16q) RQT9596

18 SC-XH70 PPC_eng.book Page 19 Tuesday, December 27, 2011 9:25 AM

Troubleshooting guide Disc operation It takes time before play starts. [MP3] Before requesting service, make the following checks. If you are in doubt Play may take time to begin when an MP3 track has still picture data. about some of the check points, or if the solutions indicated in the Even after the track starts, the correct play time will not be displayed. This following guide do not solve the problem, refer to “Customer Services is normal. Directory (United States and Puerto Rico)” on page 22 if you reside in the U.S.A. or Puerto Rico, or refer to “WARRANTY SERVICE” on page 23 if A menu screen appears during skip or search. [VCD] you reside in Canada. This is normal for Video CDs. Playback control menu does not appear. Power [VCD] with playback control No power. Press [MENU]C to change to PBC on and then press [RETURN]D Insert the AC power supply cord securely. (B 8) during playback. Getting Started The unit is automatically switched to standby mode. Play does not start. ≥ The Sleep timer was working and had reached the set time limit. (B 4) If a disc contains CD-DA and other formats, proper playback may not be ≥ The main unit will automatically switch to standby mode after 30 possible. minutes of inactivity. (B 4) No subtitles. Power of this unit is turned off when the input for the TV is Display the subtitles. (“Subtitle” in Menu 1) (B 13) changed. This is normal when using VIERA Link “HDAVI Control 4 or later”. For Point B is automatically set. details please read the operating instructions for the TV. The end of an item becomes point B when it is reached. General operation The Setup menu cannot be accessed. Select “DVD/CD” as the source. No response when any buttons are pressed. Discs Playing ≥ This unit cannot play discs other than the ones listed in this Owner’s Manual. (B 17) Sound ≥ The unit may not be operating properly due to lightning, static electricity Sound is distorted. or some other external factor. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC power supply cord, and The format (sampling frequency, etc.) of the digital audio input is not then reconnect it. supported by this unit. ≥ Condensation has formed. Wait 1 to 2 hours for it to evaporate. Effects do not work. No response when remote control buttons are pressed. Some audio effects do not work or have less effect with some discs. ≥ Check that the battery is installed correctly. (B 8) ≥ The battery is depleted. Replace it with a new one. (B 8) Humming is heard during play. ≥ Aim the remote control at the remote control signal sensor and operate. An AC power supply cord or fluorescent light is near the main unit. Keep (B 4) other appliances and cables away from the main unit.

Other products respond to the remote control. No sound. Other Operations Other Change the remote control operating mode. (B 4) ≥ There may be a slight pause in sound when you change the play speed. ≥ If the input source is bitstream, set the sound setting to PCM on the Cannot display the START menu. external equipment. Remove the disc and then press [START]B again. ≥ When using the HDMI output, audio may not output from other terminals. No picture or sound. ≥ Check the video or speaker connection. (B 6, 7) No sound from the TV. ≥ Check the power or input setting of the connected equipment and the ≥ If the TV is not ARC compatible and only the HDMI connection is used, main unit. an extra audio connection is necessary. (B 7) ≥ Check that the disc has something recorded on it. ≥ Confirm the audio connection. Press [EXT-IN]4 to select the ≥ During HD JPEG playback, there will be no video output from the corresponding source. (B 7, 9) VIDEO OUT terminal.

≥ When using the HDMI connection, ensure that “Audio Out” in the HDMI Reference menu is set to “On”. (B 16) No on-screen menus/displays. [JPEG] This is normal during HD JPEG playback. No sound from the surround speakers. When using the “Surround layout (Recommended)” mode, press You have forgotten your ratings password. ≥ [SURROUND]; to select “MULTI-CH”. (B 10) Reset all the settings to Factory Preset. ≥ When using the “Front layout (Alternative)” mode, press While “DVD/CD” is the source and there is no disc inserted, press and [SURROUND]; to select “A.SRD”. (B 10) hold [< OPEN/CLOSE]2 on the main unit and [S10]2 on the remote control until “RESET” appears on the main unit’s display. Turn the unit off and on again. Picture All settings will return to the default values. The picture on the TV is not displayed correctly or Some characters are not displayed correctly. disappears. Characters other than English alphabet and Arabic numerals may not be ≥ Ensure that the unit is connected directly to the TV, and is not displayed correctly. connected through a VCR. (B 7) ≥ Mobile telephone chargers can cause some disturbance. The VIERA Link “HDAVI Control” function does not ≥ If you are using an indoor TV antenna, change to an outdoor antenna. ≥ The TV antenna wire is too close to the unit. Move it away from the unit. respond. ≥ Reduce the number of connected HDMI devices. Depending on the condition of this unit or the connected equipment, it ≥ When using the HDMI AV OUT terminal, ensure that an incompatible may be necessary to repeat the same operation so that the function can video output with the connected TV is not selected. Set the “Video work correctly. (B 14) Resolution” in Video menu to “480p”. (B 16) ≥ Video images converted to 1920k1080 resolution may look different The setting you made in “TV Aspect” (B 15, Video menu) or from the true native 1080p full-HD sources. This is not a malfunction of “Display” (B 15, Language menu) does not work. the main unit. The settings for “TV Aspect”§1 and “Display”§2 will automatically follow the information from the TV. (B 8, Easy setup) §1 When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later” compatible TV

RQT9596 §2 When using VIERA Link “HDAVI Control” with “HDAVI Control 2 or later” compatible TV 19 SC-XH70 PPC_eng.book Page 20 Tuesday, December 27, 2011 9:25 AM

Picture size does not fit the screen. “DVD U11” ≥ Change “TV Aspect” in the Video menu. (B 15) Disc may be dirty. Wipe it clean. ≥ Use the TV to change the aspect. ≥ Change the zoom setting. (“Zoom” in Menu 2) (B 13) “SET OK” ≥ [JPEG] This is normal during HD JPEG playback. Set “HD JPEG Mode” “SET OK” is displayed when the stations are set, and the radio tunes to to “Off” if you want to perform zoom function. (B 16) the last preset station.

Menu is not displayed correctly. “ERROR” Restore the zoom ratio to “Normal”. (“Zoom” in Menu 2) (B 13) ≥ Incorrect operation performed. Read the instructions and try again. ≥ “ERROR” is displayed when automatic presetting is unsuccessful. Display is distorted. Preset the stations manually. [JPEG] This is normal when the display switches to/from HD JPEG playback. “TUNED/STEREO”

Getting Started Displayed when receiving stereo broadcasting. HDMI progressive video “TUNED” There is ghosting when HDMI progressive output is on. Displayed when receiving monaural broadcasting or monaural sound is This problem is caused by the editing method or material used on selected. DVD-Video, but should be corrected if you use interlaced output. When using the HDMI AV OUT terminal, set “Video Resolution” in Video menu “DVD H∑∑” to “480i”. Or, disable the HDMI connection and use the other video connection. (B 7, 16) “DVD F∑∑∑” ∑ stands for a number. Closed captions not displayed. ≥ Trouble may have occurred. The numbers following “H” and “F” depend When HDMI progressive output is used, closed captions will not be on the status of the unit. Turn the unit off and then back on. displayed. Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it. ≥ If the service numbers fail to clear, note the service number and contact Playing Discs Playing Radio a qualified service person. Distorted sound or noise is heard. Adjust the position of the FM antenna. “U70∑” ∑ stands for a number. (The actual number following “U70” will depend on A beat sound is heard. the state of the main unit.) Try to keep a certain amount of distance between the antenna and the TV. ≥ The HDMI connection acts unusually. – The connected equipment is not HDMI-compatible. Stations cannot be selected. – Use the High Speed HDMI Cables. Change the FM frequency step. – The HDMI cable is too long. 1 Press [RADIO]4 to select “FM”. – The HDMI cable is damaged. 2 Press and hold [< OPEN/CLOSE]2 on the main unit. After a few seconds the display changes to show the current lowest “REMOTE 1” or “REMOTE 2” frequency. Continue to hold the button down. The lowest frequency Match the modes on the main unit and remote control. Depending on the changes and the step is changed. number being displayed (“1” or “2”), press and hold [OK]8 and the corresponding numbered button ([1] or [2]) for at least 2 seconds. (B 4) Other Operations Other If noise is excessive. Change the audio to be output as monaural. Press and hold [PLAY MODE]9 to select “MONO”. Licenses The sound becomes monaural. ≥ To cancel the mode, press and hold the button again until “AUTO ST” is displayed. (The mode is also cancelled when you change the Manufactured under license from Dolby Laboratories. frequency.) Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby In normal circumstances, select “AUTO ST”. Laboratories.

Messages Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued &

Reference The following messages or service numbers may appear on the TV or pending. DTS, the Symbol, & DTS and the Symbol together are unit's display. registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All TV displays Rights Reserved.

“/” This item incorporates copy protection technology that is protected by The operation is prohibited by the unit or disc. U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. “/ Incorrect Disc Region” Only DVD-Video discs that include or have the same region number as HDMI, the HDMI Logo, and High-Definition Multimedia Interface are the one on the rear panel of this unit can be played. (B 18) trademarks or registered trademarks of HDMI Licensing LLC in the Unit displays United States and other countries.

“NO PLAY” HDAVI ControlTM is a trademark of Panasonic Corporation. ≥ You inserted a disc the unit cannot play; insert one it can. (B 17) ≥ You inserted a blank disc. VIERA LinkTM is a trademark of Panasonic Corporation. ≥ You inserted a disc that has not been finalized. “NO DISC” EZ SyncTM is a trademark of Panasonic Corporation. ≥ You have not inserted a disc; insert one. ≥ You have not inserted the disc correctly; insert it correctly. (B 11) “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. “F61” Check and correct the speaker cable connections. If this does not fix the MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS problem, consult the dealer. (B 6) and Thomson. “F76” RQT9596 There is a power supply problem. Consult the dealer. 20 SC-XH70 PPC_eng.book Page 21 Tuesday, December 27, 2011 9:25 AM

SPEAKER SECTION Specifications [Front\speakers\SB-HF10] Type 1 way, 1 speaker system (Bass reflex) AMPLIFIER SECTION Speaker unit(s) Impedance 5 ≠ 1 RMS Output Power: Dolby Digital Mode Full range 6.5 cm (2 /2q) Cone type Front Ch 55 W per channel (5 ≠), 1 kHz, 10 % THD Output sound pressure 78 dB/W (1 m) Surround Ch 55 W per channel (5 ≠), 1 kHz, 10 % THD Frequency range 80 Hz to 25 kHz (j16 dB) Center Ch 55 W per channel (5 ≠), 1 kHz, 10 % THD 120 Hz to 22 kHz (j10 dB) Subwoofer Ch 55 W per channel (5 ≠), 100 Hz, 10 % THD Dimensions (WtHtD) 80 mmk117 mmk70.5 mm (35/32qk419/32qk249/64q) Total RMS Dolby Digital mode power 330 W Mass [Weight] 0.35 kg (0.77 lbs) Front Ch 67 W per channel (5 ≠), 1 kHz, 30 % THD [Surround\speakers\SB-HS10] Surround Ch 67 W per channel (5 ≠), 1 kHz, 30 % THD Type 1 way, 1 speaker system (Bass reflex) Center Ch 67 W per channel (5 ≠), 1 kHz, 30 % THD Speaker unit(s) Impedance 5 Getting Started Subwoofer Ch 65 W per channel (5 ≠), 100 Hz, 30 % THD ≠ 1/2 ) Cone type Total RMS Dolby Digital mode power 400 W Full range 6.5 cm (2 z Output sound pressure 78 dB/W (1 m) FTC Output Power: Dolby Digital Mode Frequency range 80 Hz to 25 kHz (j16 dB) Front Ch 25 W per channel (5 ≠), 120 Hz to 20 kHz, 1 % THD 120 Hz to 22 kHz (j10 dB) Surround Ch 25 W per channel (5 ≠), 120 Hz to 20 kHz, 1 % THD Dimensions (WtHtD) 80 mmk117 mmk70.5 mm Center Ch 25 W per channel (5 ≠), 120 Hz to 20 kHz, 1 % THD 5 19 49 (3 /32qk4 /32qk2 /64q) Subwoofer Ch 35 W per channel (5 ≠), 20 Hz to 300 Hz, 1 % THD Mass [Weight] 0.35 kg (0.77 lbs) Total FTC Dolby Digital mode power 160 W [Center\speaker\SB-HC10] FM TUNER, TERMINALS SECTION Type 1 way, 1 speaker system (Bass reflex) Preset Memory FM 30 stations Speaker unit(s) Impedance 5 ≠ 1 Frequency Modulation (FM) Full range 6.5 cm (2 /2z) Cone type Output sound pressure 78 dB/W (1 m) Frequency range 87.9 MHz to 107.9 MHz (200-kHz step) Discs Playing 87.5 MHz to 108.0 MHz (100-kHz step) Frequency range 76 Hz to 25 kHz (j16 dB) 110 Hz to 22 kHz (j10 dB) Antenna terminals 75 ≠ (unbalanced) Dimensions (WtHtD) 145 mmk81 mmk70.5 mm Digital audio input (523/32zk33/16zk249/64z) Optical digital input Optical terminal Mass [Weight] 0.52 kg (1.15 lbs) Sampling frequency 32 kHz, 44.1 kHz, 48 kHz [Subwoofer\SB-HW71] Music Port (Front) Type 1 way, 1 speaker system (Bass reflex) Sensitivity 100 mV, 6.8 k≠ Speaker unit(s) Impedance 5 ≠ 3 Terminal Stereo, 3.5 mm (1/8z) jack Woofer 12 cm (4 /4z) Cone type Output sound pressure 79 dB/W (1 m) DISC SECTION Frequency range 35 Hz to 350 Hz (j16 dB) Discs played [8 cm (3q) or 12 cm (5q)] 40 Hz to 200 Hz (j10 dB) (1) DVD (DVD-Video) Dimensions (WtHtD) 153 mmk230 mmk233 mm (2) DVD-R (DVD-Video, MP3§2, 4, JPEG§3, 4) (61/32zk91/16zk93/16z) (3) DVD-R DL (DVD-Video) Mass [Weight] 2.1 kg (4.6 lbs) Operations Other (4) DVD-RW (DVD-Video, MP3§2, 4, JPEG§3, 4) (5) iR/iRW (Video) GENERAL (6) iR DL (Video) Power supply AC 120 V, 60 Hz §1, MP3§2, 4, JPEG§3, 4) (7) CD, CD-R/RW (CD-DA, Video CD, SVCD Power consumption Main unit 47 W §1 Conforming to IEC62107 Dimensions (WtHtD) 360 mmk48 mmk273 mm §2 MPEG-1 Layer 3, MPEG-2 Layer 3, MPEG-2.5 Layer 3 3 7 3 §3 Exif Ver 2.1 JPEG Baseline files (14 /16zk1 /8zk10 /4z) Picture resolution: Mass [Weight] Main unit 2.0 kg (4.4 lbs) 16:9 min. size 4k4, max. size (720k8)k(405k8); Operating temperature range 0 oC to r40 oC (r32 oF to r104 oF) 4:3 min. size 4k4, max. size (720k8)k(540k8) Operating humidity range 35 % to 80 % RH (no condensation) §4 The total combined maximum number of recognizable audio and picture contents and groups: 2600 audio and picture contents and 259 groups. (Excluding Root folder) Power consumption in standby mode approx. 0.4 W Reference Pick up Wavelength (DVD/CD) 655/790 nm Laser power For U.S.A. CLASS IIa/CLASS II 1 Specifications are subject to change without notice. For Canada CLASS 1 Mass and dimensions are approximate. Audio output (Disc) 2 Total harmonic distortion is measured by a digital spectrum analyzer. Number of channels 5.1 ch (FL, FR, C, SL, SR, SW)

VIDEO SECTION Video system NTSC Composite video output Output level 1Vp-p (75≠) Terminal Pin jack (1 system) HDMI AV output Terminal 19-pin type A connector HDAVI Control This unit supports “HDAVI Control 5” function.

RQT9596 21 SC-XH70 PPC_eng.book Page 22 Tuesday, December 27, 2011 9:25 AM

Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Home Audio Products Limited Warranty

Getting Started Limited Warranty Coverage (For USA and Puerto Rico Only) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED If your product does not work properly because of a defect in materials or UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS workmanship, Panasonic Consumer Marketing Company of North NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES America (referred to as “the warrantor”) will, for the length of the period RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT indicated on the chart below, which starts with the date of original OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes purchase (“warranty period”), at its option either (a) repair your product damages for lost time, travel to and from the servicer, loss of or damage with new or refurbished parts, (b) replace it with a new or a refurbished to media or images, data or other memory or recorded content. The items equivalent value product, or (c) refund your purchase price. The decision listed are not exclusive, but for illustration only.) to repair, replace or refund will be made by the warrantor. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD Product or Part Name Parts Labor OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or Audio Products (except items below) 1 year 1 year consequential damages, or limitations on how long an implied warranty

Playing Discs Playing DVD Home Theater System 1 year 1 year lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other Home Theater Audio System 1 year 1 year rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer SD Memory Cards, Rechargeable Not 90 days or Service Center. If the problem is not handled to your satisfaction, then Battery Packs (defective exchange) Applicable write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor. During the “Labor” warranty period there will be no charge for labor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS During the “Parts” warranty period, there will be no charge for parts. This LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Customer Services Directory (United States and Puerto Rico) Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”. Obtain Product Information and Operating Assistance; Carry-In or Mail-In Service locate your nearest Dealer or Service Center; purchase Other Operations Other To find a service center please visit http://www.panasonic.com/help or call Parts and Accessories; or make Customer Service and 1-800-211-PANA (7262). Literature requests by visiting our Web Site at: http://www.panasonic.com/help When shipping the unit, carefully pack, include all supplied accessories or, contact us via the web at: listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please http://www.panasonic.com/contactinfo visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic You may also contact us directly at: is committed to providing the most up to date information. Include a letter 1-800-211-PANA (7262) detailing the complaint, a return address and provide a daytime phone Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST number where you can be reached. A valid registered receipt is required under the Limited Warranty. For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Reference IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE Accessory Purchases (United States and Puerto Rico) PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/ PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT Purchase Parts, Accessories and Instruction Books online for PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF all Panasonic Products by visiting our Web Site at: OF PURCHASE. http://www.pstc.panasonic.com Or, send your request by E-mail to: Limited Warranty Limits And Exclusions [email protected] This warranty ONLY COVERS failures due to defects in materials or You may also contact us directly at: workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) occurred in shipment, or failures which are caused by products not (Monday-Friday 9am-9pm EST) supplied by the warrantor, or failures which result from accidents, misuse, Panasonic National Parts Center abuse, neglect, mishandling, misapplication, alteration, faulty installation, 20421 84th Ave. S., Kent, WA 98032 set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, (We accept Visa, MasterCard, Discover Card, American introduction of sand, humidity or liquids, commercial use such as hotel, Express) office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized For hearing or speech impaired TTY users, TTY: 1-866-605-1277 Servicer, or damage that is attributable to acts of God. As of January 2012 RQT9596

22 SC-XH70 PPC_eng.book Page 23 Tuesday, December 27, 2011 9:25 AM

Limited Warranty (ONLY FOR CANADA)

Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc. Getting Started

Technics Audio Product - One (1) year, parts and labour Panasonic BD/DVD Product - One (1) year, parts and labour Panasonic Audio Receivers - One (1) year, parts and labour Home Theater Systems Product - One (1) year, parts and labour

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED Playing Discs Playing LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.

Dry cell batteries are also excluded from coverage under this warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for Operations Other illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

WARRANTY SERVICE For product operation and information assistance, please contact:

PRODUCT OPERATION ASSISTANCE Reference

Customer Care Centre: Telephone #: 1-800-561-5505 Fax #: (905) 238-2360 Email link: “Support # contact us # email” on www.panasonic.ca

PRODUCT REPAIRS

Please locate your nearest Authorized Servicentre. Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca

IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of original purchase.

RQT9596 23 SC-XH70 PPC_eng.book Page 24 Tuesday, December 27, 2011 9:25 AM RQT9596 24 SC-XH70 PPC_eng.book Page 25 Tuesday, December 27, 2011 9:25 AM RQT9596 25 SC-XH70 PPC_eng.book Page 26 Tuesday, December 27, 2011 9:25 AM

(Inside of product)

User memo: THE FOLLOWING APPLIES ONLY IN THE U.S.A.

DATE OF PURCHASE ______FCC Note: DEALER NAME ______This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. DEALER ADDRESS ______These limits are designed to provide reasonable protection against ______harmful interference in a residential installation. This equipment TELEPHONE NUMBER ______generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no The model number and serial number of this product can be found guarantee that interference will not occur in a particular installation. If on either the back or the bottom of the unit. this equipment does cause harmful interference to radio or television Please note them in the space provided below and keep for future reception, which can be determined by turning the equipment off and reference. on, the user is encouraged to try to correct the interference by one or SC-XH70 MODEL NUMBER ______more of the following measures: ≥ Reorient or relocate the receiving antenna. SERIAL NUMBER ______≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from that -If you see this symbol- to which the receiver is connected. ≥ Consult the dealer or an experienced radio/TV technician for help. Information on Disposal in other Countries outside the European Union Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This symbol is only valid in the European Union. If you wish to discard this product, please This device complies with Part 15 of the FCC Rules. Operation is contact your local authorities or dealer and ask subject to the following two conditions: (1) This device may not cause for the correct method of disposal. harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America ® As an ENERGY STAR Partner, One Panasonic Way, Secaucus, NJ 07094 Panasonic has determined that ® this product meets the ENERGY STAR Support Contact: guidelines for energy efficiency. Panasonic Consumer Marketing Company of North America Telephone No.: 1-800-211-PANA (7262) For Canada only: The word “Participant” is used in place of the word "Partner".

Panasonic Consumer Marketing Panasonic Canada Inc. p Company of North America, 5770 Ambler Drive Division of Panasonic Corporation of Mississauga, Ontario North America L4W 2T3 One Panasonic Way, Secaucus, www.panasonic.ca New Jersey 07094 http://www.panasonic.com

C Panasonic Corporation 2011 RQT9596-P Printed in Malaysia F1211AT0