SC-BT230_330_730P_PC_VQT2M13_eng.book 5 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BT730 SC-BT330 SC-BT230 SC-BT235
The illustration shows the image of the unit SC-BT730. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
[For]the]U.S.A.]and]Canada] If you have any questions contact As an ENERGY STAR® Partner, [For]the]U.S.A.]and]Puerto]Rico]: 1-800-211-PANA(7262) Panasonic has determined that [For]Canada]: 1-800-561-5505 this product meets the ENERGY STAR® guidelines for energy efficiency. [Only]for[U.S.A.]and]Puerto]Rico]: The warranty can be found on page 50. For Canada only: The word “Participant” is used in place of the word Please return the product registration “Partner”. card (if included), or register via the Internet at: www.panasonic.com/register [For]Canada]: The warranty can be found on page 51.
P PC PX VQT2M13-6
until 2010/07/19 SC-BT230_330_730P_PC_VQT2M13_eng.book 2 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Getting started CAUTION! [BT730] THE FOLLOWING APPLIES ONLY IN THE U.S.A. THIS PRODUCT UTILIZES A LASER. FCC Note: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE This equipment has been tested and found to comply with the limits for a OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. harmful interference in a residential installation. This equipment DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. generates, uses and can radiate radio frequency energy and, if not REFER SERVICING TO QUALIFIED PERSONNEL. installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a WARNING: particular installation. If this equipment does cause harmful interference TO REDUCE THE RISK OF FIRE, ELECTRIC to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the SHOCK OR PRODUCT DAMAGE, interference by one or more of the following measures: ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, ≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and receiver. MOISTURE, DRIPPING OR SPLASHING AND ≥ Connect the equipment into an outlet on a circuit different from that to THAT NO OBJECTS FILLED WITH LIQUIDS, which the receiver is connected. SUCH AS VASES, SHALL BE PLACED ON THE ≥ Consult the dealer or an experienced radio/TV technician for help. APPARATUS. FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation with ≥ USE ONLY THE RECOMMENDED non-approved equipment or unshielded cables may result in interference ACCESSORIES. to radio and TV reception. Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to ≥ DO NOT REMOVE THE COVER (OR BACK); operate this equipment. THERE ARE NO USER SERVICEABLE PARTS This device complies with Part 15 of the FCC Rules. INSIDE. REFER SERVICING TO QUALIFIED Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and SERVICE PERSONNEL. (2) this device must accept any interference received, including interference that may cause undesired operation. THE FOLLOWING APPLIES ONLY IN THE U.S.A. Responsible Party: FCC Note: Panasonic Corporation of North America This equipment has been tested and found to comply with the limits for a One Panasonic Way Class B digital device, pursuant to Part 15 of the FCC Rules. Secaucus, NJ 07094 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment Support Contact: generates, uses, and can radiate radio frequency energy and, if not Panasonic Consumer Electronics Company installed and used in accordance with the instructions, may cause Telephone No.: 1-800-211-PANA (7262) harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the WARNING: interference by one or more of the following measures: To satisfy FCC RF exposure requirements for mobile transmitting ≥ Reorient or relocate the receiving antenna. devices, a separation distance of 20 cm or more should be maintained ≥ Increase the separation between the equipment and receiver. between the antenna of this device and persons during device operation. ≥ Connect the equipment into an outlet on a circuit different from that to To ensure compliance, operations at closer than this distance is not which the receiver is connected. recommended. The antenna used for this transmitter must not be ≥ Consult the dealer or an experienced radio/TV technician for help. co-located in conjunction with any other antenna or transmitter. FCC Caution:To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not [BT730] expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. THE FOLLOWING APPLIES ONLY IN CANADA. This device complies with RSS-210 of the IC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (1) This device may not cause harmful interference, (2) this device must accept any interference received, including (2) This device must accept any interference received, interference that may cause undesired operation. including interference that may cause undesired operation Responsible Party: of the device. Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 [BT730] Support Contact: THE FOLLOWING APPLIES ONLY IN CANADA. Panasonic Consumer Electronics Company This Class B digital apparatus complies with Canadian Telephone No.: 1-800-211-PANA (7262) ICES-003.
[BT730] For wireless system Product Identification Marking is located on the bottom of wireless system. VQT2M13 2 SC-BT230_330_730P_PC_VQT2M13_eng.book 3 ページ ２０１０年３月１６日 火曜日 午後５時５７分
IMPORTANT SAFETY THE FOLLOWING APPLIES ONLY TO THE U.S.A. AND CANADA. INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK Read these operating instructions carefully before using the DO NOT OPEN unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. operating instructions handy for future reference. NO USER-SERVICEABLE PARTS 1 Read these instructions. INSIDE. 2 Keep these instructions. REFER SERVICING TO QUALIFIED 3 Heed all warnings. SERVICE PERSONNEL. 4 Follow all instructions. The lightning flash with arrowhead symbol, within 5 Do not use this apparatus near water. an equilateral triangle, is intended to alert the user 6 Clean only with dry cloth. to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be 7 Do not block any ventilation openings. Install in of sufficient magnitude to constitute a risk of accordance with the manufacturer’s instructions. electric shock to persons. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including The exclamation point within an equilateral triangle amplifiers) that produce heat. is intended to alert the user to the presence of 9 (For the U.S.A. and Canada) important operating and maintenance (servicing) Do not defeat the safety purpose of the polarized or instructions in the literature accompanying the appliance. grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. (Inside of product) 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. The laser product 14 Refer all servicing to qualified service personnel. Servicing label has not been is required when the apparatus has been damaged in any attached to way, such as power-supply cord or plug is damaged, liquid products for the has been spilled or objects have fallen into the apparatus, U.S.A. and the apparatus has been exposed to rain or moisture, does Canada. not operate normally, or has been dropped. CAUTION! (For units with PX printed on the packaging) ≥ DO NOT INSTALL OR PLACE THIS UNIT IN A THIS UNIT IS INTENDED FOR USE IN MODERATE BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CLIMATES. CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC (For units with PX printed on the packaging) SHOCK OR FIRE HAZARD DUE TO OVERHEATING, CAUTION: ENSURE THAT CURTAINS AND ANY OTHER The AC voltage is different according to the area. Be sure MATERIALS DO NOT OBSTRUCT THE VENTILATION to set the proper voltage in your area before use. VENTS. ≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION (For details, please refer to page > 18.) OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. (For units with PX printed on the packaging) ≥ DO NOT PLACE SOURCES OF NAKED FLAMES, This product may receive radio interference caused by SUCH AS LIGHTED CANDLES, ON THE UNIT. mobile telephones during use. If such interference is VQT2M13 ≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY apparent, please increase separation between the product FRIENDLY MANNER. and the mobile telephone. 3 SC-BT230_330_730P_PC_VQT2M13_eng.book 4 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Table of contents IMPORTANT SAFETY INSTRUCTIONS ...... 3
Getting started TV
Accessory...... 5 Enjoying TV with unit’s speakers...... 30 Control reference guide...... 6 •Surround sound effects...... 30 •Remote control...... 6 •Sound modes...... 30 •Main unit (Front)...... 7 •Making settings for digital audio input...... 30 •Main unit (Rear)...... 7 Linked operations with the TV Playable discs/Cards...... 8 (VIERA LinkTM “HDAVI ControlTM”)...... 31 Unit and media care ...... 9 •Setting the audio link ...... 31 Using the remote control ...... 9 •Easy control only with VIERA remote control ...... 32 STEP 1 : Preparing the speakers...... 10 •Assembling the speakers ...... 10 Other devices •Speaker assembly option...... 11 STEP 2 : Positioning ...... 12 Using the iPod/iPhone...... 32 STEP 3: Connections...... 13 •iPod/iPhone Connection ...... 32 •Speaker cable connection...... 13 •iPod/iPhone Playback...... 33 •Connection to a TV ...... 14 •Radio antenna connection ...... 16 •[BT730] Digital transmitter connection ...... 16 Advanced operations •Connection to a broadband network ...... 17 STEP 4: AC power supply cord connection .... 18 Enjoying VIERA CASTTM ...... 34 STEP 5: [BT730] Playback menu ...... 34 Preparing the wireless system ...... 18 Setup menu ...... 36 STEP 6: Smart setup / Easy setup...... 19 •Speaker settings...... 39 •Network Easy Setting...... 20 •Firmware updates...... 21 STEP 7: Optional speaker settings Reprogramming the remote control ...... 22 Speaker installation option ...... 40 Inserting or removing a media...... 22 START menu ...... 23 Enjoying sound effects from all speakers...... 24 Reference •Enjoying surround sound effects...... 24 Troubleshooting guide...... 41 Messages ...... 43 Playback About MP3/JPEG/AVCHD/MPEG2 files...... 44 Supplemental information...... 45 Playing video contents ...... 25 Glossary ...... 47 •Other operations during play...... 25 •Useful functions...... 26 Specifications ...... 48 •Enjoying BD-Live or BONUSVIEW in BD-Video ...... 26 Limited Warranty Playing still pictures...... 27 (ONLY FOR U.S.A. AND PUERTO RICO)...... 50 •Useful functions...... 28 Limited Warranty (Only for CANADA) ...... 51 Playing music ...... 28 Index...... Back cover
Radio
Listening to the Radio ...... 29 •Presetting stations automatically...... 29 •Presetting stations manually ...... 29 •Listening/confirming the preset channels...... 29
VQT2M13 4 English English display onthe front and side back of unit.the label to enclosed CanadianFrench the The corresponds sheet (ONLYCANADA) FOR before suppliedusingthisCheck the unit.accessories Accessory started Getting ≥ ≥ with red connector red with [RYK1609A-K] connector white with [RYK1609-K] ∏ ∏ with red connector red with [RYPX1041-KR] connector white with [RYPX1041-KL] ∏ [BT330] ∏ [BT730] ∏ ≥ System ≥ Speaker system Front speakers Front system Speaker Main unit Wireless system (with a (with Wireless digitalsystem transmitter) Subwoofer SC-BT230_330_730P_PC_VQT2M13_eng.book 5 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 5 SC-BT230_330_730P_PC_VQT2M13_eng.book product may not be on sale in certain regions. this with included are not that instructions operating in these mentioned devices external and accessories Some Some modelsmaynot be onsale incertain regions. (N2QAKB000089) operations on the main unit if the controls are the are same. controls the if unit main onthe operations youthe perform can but control, remote with the Operations in these instructions are described mainly and Canada. operating Unless illustrations in otherwise these indicated, SC-BT235. and SC-BT230 SC-BT330, SC-BT730, models to applicable are instructions These operating 1 Remote control Remote 1 Speaker cables Speaker stands 2 2 For units with printedPX onthe packaging theFor U.S.A. andCanada supplyAC power cord (with cable) standsSpeaker (with cable)
[BT235]
instructions for the instructions of are U.S.A. SC-BT730 ∏ ∏ fot [REEX1152A], connector red with (front) [BT230] [REEX1155, ( [REEX1154], with greenconnector (surround) (center) ∏ [BT330] 2 [BT730] 1 Surround speakers Center speaker Center (K2CB2CB00021) (K2CB2CB00021) (RYK1610-K) (RYPX0389-K) 2 Batteries for for Batteries 2 2 Bases Bases 2 2 Bases Bases 2 remote control remote
[BT235] [REEX1156, ( [REEX1153A], with white connector
[BT230] [BT730] [BT730] ∏ ∏ ∏ ∏ (K2KA2BA00001) BH30S-W3 BH40SB-HW480 SB-HW480 SB-HW330 SB-HW330 (XYN5+J18FJK) 2 Screws (XTN5+10FFJK) 4 Screws cable Video 1 (XTN5+10FFJK) 8 Screws BH70S-C3 BH20SB-HC230 SB-HC230 SB-HC230 SB-HC730 BH20S-S3 BH20SB-HS230 SB-HS230 SB-HS230 SB-HS230 SC-BT730 BH70S-F3 BH20SB-HF330 SB-HF230 SB-HF330 SB-HF730 AB70S-T3 AB20SA-BT235 SA-BT230 SA-BT330 SA-BT730 S H : REEX1156B)], with blue connector connector REEX1155B)], : gray with - F X 7 1——— [BT330] [BT730] applicable to: features Indicates ≥ ≥ ≥ [BT235] [BT230] Product as numbers correct of December 2009.These Product tochange. may be subject made your purchase. made your areas:ToFor other have call thedealerfromwhom you orderaccessories, 50. (United StatesPurchases andPuertoRico)” onpage Only for U.S.A. and Puerto Rico: To order accessories, referto “Accessory equipment. ACpower supplycordwithother Do notuse : only SC-BT730 : : SC-BT235 only SC-BT235 : only SC-BT230 : SC-BT330 only SC-BT330 SC-BT330 ∏ ∏ packaging the on printed unitsPX with For 1 [BT230] 2 [BT730] (K2CQ2CA00007) (K2CQ2CA00007) (RSAX0002) FM indoor 1 1 2 AC plug adaptor (K2DAYYY00002) (K2DAYYY00002) antenna SC-BT230 ∏ ∏ [BT730] [BT230] [BT730] 1 Sheet of speaker speaker of Sheet 1 1 Auto 1 Auto speaker cable stickers cable (L0CBAY000034) setup microphone
[BT330] SC-BT235 VQT2M13 5 Optional speaker Reference settings Advanced operationsOther devices TV Radio PlaybackGetting started SC-BT230_330_730P_PC_VQT2M13_eng.book 6 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Control reference guide
13 TV Remote control
1 VOL 1 Turn the unit on and off (> 19) INPUT 2 Display the Home screen of VIERA CAST (> 34) 2 3 Select title numbers, etc./Enter numbers or characters (> 34) @. 1 2ABC 3DEF [CANCEL]: Cancel VOL 14 4 Basic playback control buttons (> 25) 3 GHI JKL MNO 4 5 6 5 Select preset radio stations P W 6 Show status messages (> 25) 7QRS 8TUV 9XYZ MUTE 7 Show Top Menu/Direct Navigator (> 25) CANCEL 15 0_, 8[3, 4, 2, 1]: Menu selection RADIO [OK]: Selection BD/SD iPod EXT-IN 16 [2, 1]: Select preset radio station (> 29) [2] (2;), [1] (;1): Frame-by-frame (> 25) SEARCH PLAY SEARCH 4 17 9 Show sub menu (> 26) SLOW 10 These buttons are used when; SKIP PAUSE SKIP ≥ Operating a BD-Video disc that includes JavaTM 5 applications (BD-J). Displaying “Title View” and “Album View” screens. STOP ≥ STATUS EXIT (> 27) 6 18 ≥ Operating contents of VIERA CAST (> 34) START R O T P 11 Set the sound mode (> 24)/Select speaker channel A O G U P 19 I N - V E U (> 24) A P N M M T 12 Select surround sound effects (> 24) C P E E N
R O I U
T 7 D 20 OK 13 TV operation buttons [Í]: Turn the television on and off 8 [INPUT]: Input select SUB MENU RETURN s [ijVOL]: Adjust the volume 9 21 14 Adjust the volume of the main unit R G B Y 10 15 Mute the sound SOUND SURROUND DISPLAY AUDIO ≥ “MUTE” flashes on the unit’s display, while the function is on. 11 -CH SELECT -SLEEP 22 To cancel, press the button again or adjust the volume. 12 ≥ 23 ≥ Muting is canceled if the unit is turned off. 16 Select the source [BD/SD]: Select disc drive or SD card drive (> 23) [iPod]: Select iPod/iPhone as the source (> 23, 33) [RADIO/EXT-IN]: Select FM tuner or external audio as the source (> 23, 29, 30) 17 Select radio stations manually (> 29) 18 Exit the menu screen 19 Show START menu (> 23) 20 Show Pop-up menu (> 25) 21 Return to previous screen 22 Select audio (> 25) 23 Show Playback menu (> 34)/Set the sleep timer 1 Press and hold [–SLEEP]. 2 While “SLEEP ££” is displayed, press [–SLEEP] several times to select the time (in minutes). ≥ Timer selection is up to 120 minutes. ≥ Select “OFF” when cancelling the setting. ≥ To confirm the remaining time Press and hold the button again.
VQT2M13 6 6 FM radioantenna FM terminal ( 6 ∫ 1 5 Open or the Open disctray close ( unit main 5 the of volume the Adjust (4 iPod/iPhone Connect 3 2 8 SD card slot( 7 tray Disc 6 5 HDMI AV OUT terminal ( AV terminal HDMI OUT 5 4 Coolingfan 3 Speaker terminals ( 2 INterminal AC ( 1 ≥ energy. save and its consumption power conserve to designed unit is This the andCanada) (For U.S.A. SC-BT230_330_730P_PC_VQT2M13_eng.book 7 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 7 SC-BT230_330_730P_PC_VQT2M13_eng.book e.g., This unit will automatically turn to standby mode after 30 minutes if it is inactive. itif is minutes after 30 standby mode to turn automatically unit will This e.g., Standby/on switch (POWER The indicatorThe lights whenthis unit isturned on. Power indicator of amount power. small a still consuming is unitthe standbymode, In versa. vice or standby mode on to from unitthe switch to Press [BT730] If the front cover comes off comes cover front the If [BT730] polarized. not is terminal The * units(For with printedPX onthe packaging) adaptor ( adaptor Main unit (Front) Main unit (Rear) [BT730] [BT730]
[BT330] [BT330] > 17) > AC IN AAC Connect setup microphone speaker Auto
[BT230] 1 > ニ 22) SUBWOOFER POWER 18) 1 > -- + 6 CENTER USB port for optional wireless optional wireless for port USB 2 13) > 5 5 FRONT R R 2 2 2 > 366 32) 1 1 L L Saving energy Saving 15) > > Í 16) 22) /I 6 ) ( > 19) 3 WIRELESS WIRELESS 4 LAN LAN VOLT ADJ (10BASE-T/100BASE-TX) 3 RÉSEAU LOCAL LAN 9 LAN 110 7 SD CARD 127V (ARC) 5 220 iPod OUT OUT AV AV DIGITAL INAUDIO terminals ( 7 3Start ( play 13 12 AC Voltage selector ( Voltageselector AC 12 units(For with printedPX on packaging)the terminal ( AUX 11 8 ≥ 3 2 1 2Stop ( 12 ( the source Select 11 10 Remote control signal sensor control Remote 10 display) (FL Display 9 0VIDEO OUTterminal( 10 9LAN port( 240V If it doesnot, it and remove the repeat above procedure. VIDEO VIDEO 10 OUT OUT Terminal TV. the with connection for designated 1 is Terminal the other 2 STB. than beused equipment can with [BT730] correctly.moves now cover that the Check place. into clicked all have Thenplace. pushthe hooksoneby succeeding until into clicks it until unit the towards firmly hook the Push slot on thecorresponding unit. the first with cover the on hook protruding side right or left up and match hand by one unit main of side rear Hold nl:Apo.20 Approx. Angle: (23 ft.) m 7 Within approx. Distance: ≥ Canada) and U.S.A. the (For ≥ AUX 11
“0”. ( displayis The offturned when the volume is adjusted to speakers. surround lights (SURROUND) whensoundis“SRD” output to the
R R
L L 12 FM ANT () 75 > OPTICAL 6 OPTICAL >
[BT330] DIGITAL AUDIOIN 1 DIGITAL AUDIOIN 25) 01 213 12 11 10 9 8 37) > SETUP MIC > 7 2 17) 25)
> [BT230] 14) o > up and down, 30 down, up and > 23) Digital transmitter dock dock Digital transmitter > 18) 14) VOLUME 45 > DIGITAL TRANSMITTER 4,15) 14 , SELECTOR OPEN/CLOSE 8 o left and right Pull open. VQT2M13 7
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 8 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Playable discs/Cards
Type Logo examples Type detail Playable contents BD-Video Video Video [BD] BD-RE JPEG BD-R Video
DVD-Video Video
Video DVD-RAM AVCHD JPEG
DVD-R [DVD] Video AVCHD MP3 DVD-R DL JPEG
DVD-RW Video AVCHD — +R/+RW/+R DL
Music CD Music [CD-DA]
[CD] Music [CD-DA] CD-R — MP3 CD-RW JPEG SD Memory Card (8 MB to 2 GB) (Includes miniSD Card and microSD Card) SDHC Memory Card (4 GB to 32 GB) MPEG2 [SD] (Includes microSDHC Card) AVCHD SDXC Memory Card (48 GB, 64 GB) JPEG (Includes microSDXC Card) (as of December 2009)
∫ Discs that cannot be played in this unit ∫ Region management information Any other disc that is not specifically supported or BD-Video previously described. This unit plays BD-Video marked with labels containing the ≥ 2.6 GB and 5.2 GB DVD-RAM region code A. ≥ DVD-RAM that cannot be removed from cartridge Example: ≥ Super Audio CD ≥ Photo CD ≥ DVD-Audio ≥ Video CD and Super Video CD ≥ WMA discs ≥ DivX discs ≥ PAL discs DVD-Video ≥ HD DVD This unit plays DVD-Video marked with labels containing the ≥ BD-Video discs recorded at a rate of 50 fields/sec region number “1” or “ALL”. Example:
1 2 1 ALL 4
VQT2M13 8 factory preset”) factory delete the user settings. ( settings. user the delete tothe return procedure all the presets settings to to the factory by unit either this discard you The keepthe unit user settings may information in the unit. If ∫ ≥ ≥ ≥ ≥ ≥ ∫ dry. wipe then and cloth damp a with Wipe ∫ ∫ ≥ ≥ ∫ mediaUnit and care ≥ ≥ ∫ formats, torefer page 36. Audio) inadopted BD-Video. In orderto enjoy these audio TrueHD, High Resolution DTS-HD Audioand Master DTS-HD unit high This supports ratebit audio(Dolby Dolby Digital Plus, ∫ instructions. this tounit. the Pleaserefer recorder’s a recorder, to befinalizedetc. needs to bythe playon recorder and DL recorded CD-R/RW by DL, +R/+RW/+R DVD-R/RW/R ∫ ≥ ≥ included) (not disc:RP-CL720PP cleaner Lens SC-BT230_330_730P_PC_VQT2M13_eng.book 9 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 9 SC-BT230_330_730P_PC_VQT2M13_eng.book j j j Do not usethe following discs: on the rearsideof the card. Clean anydust, water, orforeignthe matter from terminals solvent. other any liquids or prevention electricity thinner,Do notbenzine, sprays, cleaning userecord static Do not attach tolabels or discs. stickers disc. the fingerprints on or scratches inadvertent avoid to edges the by discs Handle that withinstructions thecame cloth. usingchemically Before treated cloth, read carefully the unit.this clean to benzine paint or alcohol, thinner use Never possible. be not may playback so format (CD-DA) Audio DigitalDisc Compact the of specifications technical the meet not does a DualDisc side of digitalcontent The audio guaranteed. specifications (copy CD-DA Operation and soundquality of CDs that donot to conform used on this unit as well. as unit this used on This lenscleaneris as sold region. This lenscleanermay not be for sale dependingon the Irregularly shaped discs, shapeddiscs, Irregularly that Discs are badly warpedorcracked. etc). labels (rented discs or stickers with exposedadhesive removed Discs from To disposeorthis unit transfer Disc and card handling precautions discs Clean disc. cleaner lens the with lens the Clean thisClean unitwitha soft, cloth. dry Music CD BD-Video Finalize DO > 41, “To return all settings to the such as heart shapes. heart as such disposal or transfer,disposal or follow then control control etc.) CDs, cannot be specific forspecific DIGA, but canbe DO NOT DO ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ∫ period of time. Storeperiod of darkplace. inacool, going tobeusedforalong iftheremotecontrolisnot Remove batteries ≥ ≥ ≥ ≥ ≥ ≥ contactsitems thefluid maycauseafire. and leakagewhichcandamage ofbatteriescancauseelectrolyte Mishandling itPoint the control at remote signal sensor on this unit ( Insert so the poles (+ and –) match inthose the remote control. control Using theremote instructions. manufacturer. accordingtothemanufacturer’s Disposeofusedbatteries typerecommendedbythe Replace onlywiththesameorequivalent replaced. Danger ofexplosionifbatteryisincorrectly CAUTION unit. this of memory inthe berecorded may history operation The Useable memory may be slightly less than the card capacity.card the be than less slightly may memory Useable being formatted etc. card the to due erased be contents may recorded devices, If thecard SD isusedwith incompatible or computers Cardsin long file Memory exFAT.and SDXC name.) Cardsin Memory FAT32SDHC (Doesnot support format SpecificationsCard FAT12 FAT16 and wellas formats, as SD meet Cards that Memory with SD iscompatible unit This “LOCK”. to card) SD the tab (on To card’sprotect the contents, movethe record prevention swallowing. prevent to Cardout of Memory Keep reachof the children provided. customer otherwise or cards, such with supplied usually be usedwithmust an These card. adaptor are Cardscanbe but used, Cards microSDXC and microSDHC Cards, microSD Cards, MiniSD instructions. Readthedisc’sinstructions. instructionscarefully. intheseoperating beabletocontrolplayasdescribed not always discsareplayed. Soyoumay ofthedisccancontrolhow The producers fileswerecreated. how the therecordingmethodand media, theconditionofrecording, type of mediainsomecases duetothe bepossibletoplaytheabove It maynot Do not use batteries if the covering has been peeledoff. batteriesifthecoveringhas Do notuse batteries. torechargealkalineormanganese Do notattempt Do nottakeapart circuit. orshort closed. oftimewithdoorsandwindows a longperiod exposedtodirectsunlightfor Do notleavethebattery(ies) in anautomobile orexposetoflame. Do notheat oldandnewbatteriesordifferenttypesatthesametime. Do notmix SD card batteries) (Alkaline ormanganese R6/LR6, AA > 7). VQT2M13 9
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 10 ページ ２０１０年３月１６日 火曜日 午後５時５７分
STEP 1 : Preparing the speakers Assembling the speakers [BT730] [BT330] [BT235] Preparation Caution ≥ To prevent damage or scratches, lay down a soft cloth and ≥ Do not stand on the base. Be cautious when children are perform assembly on it. near. ≥ For wall mount, refer to page 40. ≥ When carrying speakers, hold the stand and base parts. ≥ Keep the screws out of reach of children to prevent swallowing. [BT730] [BT330] [BT235] 2 Front speakers 2 Front speakers 2 Stands (with cables) 2 Stands (with cables) 2 Bases 2 Bases 4 Screws A 8 Screws 2 Screws B
A B
[BT730]
1 Back of the base Pull the cable straight along the line and slide into the groove.
Tighten Screw A securely. 2 2 Insert the wire fully. r: White s: Blue line Push!
Press into the groove. 1 Screw B Tighten securely. Leave about 80 mm (3 5/32q)
[BT330] [BT235] 1
Slide into the groove.
Screw Tighten securely. 2
2 Insert the wire fully. r: White s: Blue line Push! Position the cable between the ridges. Press into the groove. 1 VQT2M13 23 Tighten securely. 10 Leave about 120 mm (4 /32q) ≥ ≥ ∫ [BT730] [BT330] color.connector the with sticker on each number the match to sure Be B A e.g., 2 1 Speaker cable sticker 6 5 4 3 SC-BT230_330_730P_PC_VQT2M13_eng.book 11 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 11 SC-BT230_330_730P_PC_VQT2M13_eng.book Use a string of less than ‰ than less of string a Use not enough attachment Improper havestrong may support. whenattachi the procedure concerning aqualified appropriate Consult housingcontractor 3 through the base. the through the Thread cable speaker Connector Speaker cable sticker Preventing the speakers from falling from speakers the Preventing FRONT (R) FRONT (L) SUBWOOFER CENTER (R) SURROUND (L) SURROUND Speaker assembly option Speaker assembly [BT730] e.g. Front speaker (L) e.g. Front speaker
convenient when cable convenient making connections. is cable Use of the stickers speaker [BT330] [BT235] cable, refer to page40. to refer cable, stand. the Tofrom the reattach Youcable the and use remove can
[BT235] Leave about 120 mm (4 mm 120 about Leave (included) 2.0 mm mm ( 2.0 FRONT Lch 3 / 32 ,wihi aal fspotn vr1 k which iscapableq), of supporting over 10 Color GRAY BLUE WHITE GREEN RED PURPLE 23 / 32 q) Attachspeaker. the may in may result thedamage to wall orspeakers. E D C B A ≥ ≥ ≥ ≥ speaker when carrying. to avoidinjurybydroppingthe thespeakerinonehand Do nothold not tostumbleorhook. with care To avoidinjurybyfallingordroppingthespeaker, placethespeakercables theappropriatecable. connecting ofthespeakerbefore speaker withthelabelonrear the typeof orviceversa.Verify frontspeakerasasurround Don’t usea thespeakers. wiresasdoingsomaydamage speaker thepolarityof nottocross(short-circuit)orreverse Be careful 4 Approx.150 mm mm (5 Approx.150 Wall eye(not Screw included) speaker the of Rear the from Thread wall to andtiethe speaker tightly. String (not included) e.g. Surround speaker Surround e.g. Press into the groove. the into Press : Blue line Blue s: r: White fully.Insert thewire Tighten securely. taking care not to insert beyond the wire insulation. wire the beyond insert to not taking care fully, wire the Insert cables. speaker the Connecting (22 lbs). g (22 groove. the intoSlide 29 Push! / ng to a concrete wall or a surface thatng to wallorasurface aconcrete 32 q) Push! s: Blueline r: White
VQT2M13 11
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 12 ページ ２０１０年３月１６日 火曜日 午後５時５７分
STEP 2 : Positioning
Caution ≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. ≥ Do not attempt to attach these speakers to walls using methods other than those described in this manual. ≥ Do not touch the front netted area of the speakers. Hold by the sides. How you set up your speakers can affect the bass and the sound field. Setup example Place the front, center and surround speakers at ≥ Use only supplied speakers approximately the same distance from the seating position. Using other speakers can damage the unit, and sound quality will be The angles in the diagram are approximate. negatively affected. [BT730] [BT330] ≥ You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. Using “Auto Speaker Setup” (> 19) is a convenient way to get ≥ Positioning speakers in front the ideal surround sound from your speakers when you are It is possible to locate all the speakers in front of the listening position. unable to place them. However, the optimal surround sound effect may not be obtainable. ≥ Place speakers on flat secure bases. ≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains. 13 ≥ Keep your speakers at least 10 mm ( /32z) away from the system for ≥ For optional wall mount, refer to page 40. proper ventilation. ∫ If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away from the TV. [BT730] 60° ∫ Wireless system To avoid interference, maintain the following distances between the wireless system and other electronic devices that use the same radio frequency (2.4 GHz band). 120° Wireless Wireless LAN: system 1 approx. 2 m (6 /2 ft.) Cordless phone and other electronic devices: A Center speaker approx. 2 m (61/2 ft.) Put on a rack or shelf. Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV. The wireless system will automatically seek a clear channel if B Front speakers any of these other devices interfere with its communication. When this happens, the wireless link indicator (“ [W] ”) flashes C Subwoofer on the main unit, and there is a brief interruption in audio D Surround speakers coming from the surround speakers. ≥ Place the speakers at the same height or higher than ear This is the normal operation of the product working to assure level. the best possible performance of your home theater system. E [BT730] Wireless system If the interference persists, try moving the other devices to ≥ Place the wireless system within approximately 10 m (33 another location outside the range of the wireless system or ft.) from the main unit, and in a horizontal position with move the wireless system nearer to the main unit. the top panel faced upward. [BT730] [BT330] [BT230] ≥ To allow for proper ventilation and to maintain good airflow around the wireless system, position it with at ∫ Upgrade your system to 7.1-channel least 5 cm (2z) of space on all sides. system ≥ Do not use the wireless system or the digital transmitter The main unit is designed to enjoy the 7.1ch surround sound. By in a metal cabinet or bookshelf. connecting 2 units of the Panasonic wireless system SH-FX71 with 4 speakers, more theater-like effect can be available. [BT330] [BT230] You can enjoy surround speaker sound wirelessly when you use the optional Necessary equipment: Panasonic wireless accessory [BT730] (SH-FX71). ≥ 1 optional wireless system (SH-FX71) For more details, refer to the operating ≥ 2 additional speakers instructions for the optional wireless system. [Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)] [BT330] [BT230] ≥ 2 optional wireless systems (SH-FX71) ≥ 2 additional speakers [Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)] VQT2M13 For more details, refer to the operating instructions for the 12 optional wireless system. [BT330] [BT730] toConnect the of terminals the same color. the Do connect supplyAC power not cord until all other are connections complete. Turn off all equipment and connection before re STEP 3: SC-BT230_330_730P_PC_VQT2M13_eng.book 13 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 13 SC-BT230_330_730P_PC_VQT2M13_eng.book SUBWOOFER SUBWOOFER Speaker cableconnection + +
[BT230] 6 CENTER 6 CENTER 5 5 FRONT R 2
FRONT [BT235] R 2 366 366 1 L 1 L SURROUND 4 R 3
3 Connections L 1 2 5 6 WHITE RED GREEN PURPLE AC IN 3 4 1 2 5 6 - + Front speaker Front speaker (Lch) speaker Front (Rch) speaker Center Subwoofer ad the appropriate operating instructions. operating appropriate the ad BLUE GRAY WHITE RED GREEN PURPLE Main unit Main unit Surround speaker (Lch) speaker Surround (Rch) speaker Surround (Lch) speaker Front (Rch) speaker Front speaker Center Subwoofer SIDE L SURR SIDE R AMBIOPHONIQUES SURROUND (3-6 LS /RBLBRS ENCEINTES SPEAKERS )
back speakers to the unit.back speakers main or any extra surround surround connect to attempt do not system, wireless optionalthe using When [BT330] 4 3 GRAY BLUE
[BT230] Surround speaker (Rch) speaker Surround (Lch) speaker Surround the center position. center the beset in must switch selector surround The selector Surround Wireless system VQT2M13 13
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 14 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Connection to a TV The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize your system setting.
≥Do not make the video connections through the VCR. Due to copy guard protection, the picture may not be displayed properly. ≥Turn off all equipment before connection. ∫ HDMI ∫ OPTICAL IN The HDMI connection supports VIERA Link “HDAVI Control” ≥ After making the digital audio connection, make settings to (> 31) when used with a compatible Panasonic TV. suit the type of audio from your digital equipment (> 30). ≥ Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less. Recommended part number: RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
Basic connection
VIDEO IN TV
AUDIO IN AUDIO OUT
L L
R R
AUX
L 1 AV OUT Video cable (included) R A
VIDEOVIDEO OUT AUX B Audio cable (not included) VIDEO OUT
≥To enjoy TV audio from this home theater system’s speakers, select “AUX (TV)” as a source (> 23).
Connection for the better audio
VIDEO IN
TV OPTICAL OUT
AUDIO IN
L
R
DIGITAL AUDIO IN
OPTICAL L 1 2
R A Video cable (included)
VIDEO OPTICAL 1 OUT AUX B Optical digital audio cable (not included) VIDEO OUT
≥To enjoy TV audio from this home theater system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source.
VQT2M13 14 ≥ ≥ NECESSARY SETTINGS ≥ ≥ With this function it is theto possible digitalreceive audio signal from TV the without anyother connecting audio cables. (Available using when an compatibleARC TV) ARC (Audio Channel) Return ≥ WIRELESS SC-BT230_330_730P_PC_VQT2M13_eng.book 15 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 15 SC-BT230_330_730P_PC_VQT2M13_eng.book Connection with SetTop Box, etc. Connection for the best picture and audio Refer to the operating instructions of the TV for the settings to output digitalaudio. output to settings the for TV the of instructions operating the to Refer (> se speakers, To system’s theater home this audio from TV enjoy ( source audio input the as (TV)” “ARC Select “DIGITAL select speakers, To system’s INor 1” asa 1 theater ( “D-IN home source (TV)” this audio from TV enjoy “HDMI Audio Output” : “Off” ( : Output” Audio “HDMI LAN TV TV 23). RÉSEAU LOCAL LAN devices for the optimal devices for optimal connections. the the instructions of Refer to respective the operating HDMI AV OUT (ARC) AUX AV IN (ARC) OUT OUT AV
AV
R R
L L OPTICAL VIDEO OUT 1 DIGITAL AUDIOIN AUX > 2
OPTICAL 2
R R
L L OPTICAL OPTICAL 37) OPTICAL 1 1 DIGITAL AUDIOIN DIGITALIN IN AUDIO AUDIO OUT OPTICAL 1 2 2 OPTICAL OUT > 23). DIGITAL TRANSMITTER B A B A lect “DIGITAL IN 2 (CABLE/SAT)” 2” or “D-IN as a source Optical digitalOptical audio cable cable HDMI ≥ the AUDIO OUT terminal on the TV. on the terminal OUT AUDIO the be also usedbyconnecting with AUX terminal the For the TV audio, an audio cable (not included) can Set TopSet TV, cable Box, recorder, DVD VCR, etc. Optical digital audio cable (not included) (not
(not included) (not
(not included) (not > 23). VQT2M13 15
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 16 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Radio antenna connection
Using an indoor antenna
Main unit A FM indoor antenna (included) B Adhesive tape Affix this end of the antenna where reception is FM ANT (75 ) best.
Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
e.g., Main unit
A FM outdoor antenna [Using a TV antenna (not included)] FM ANT (75 ) The antenna should be installed by a competent technician. B 75 ≠ coaxial cable (not included) C Antenna plug (not included)
[BT730] Digital transmitter connection
Do not insert or remove while the home theater unit is on. DIGITAL TRANSMITTER
Insert fully until you hear a click.
VQT2M13 16 ≥ ≥ broadband. to be us can following services The ≥ ≥ ≥ D C B A ∫ SC-BT230_330_730P_PC_VQT2M13_eng.book 17 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 17 SC-BT230_330_730P_PC_VQT2M13_eng.book You ( BD-Live the enjoy can updated be can Firmware You can enjoy VIERA CAST ( You CAST VIERA enjoy can terminal candamage the unit. Inserting any thancable other a cable LAN in the LAN devices. peripheral to connecting when cables LAN Use shielded Modem (Broadband) *Provided by ISP by *Provided (Broadband) Modem LAN Cable included) (not router,Broadband etc. LAN Cable included) (not Using LAN(ethernet)cable Connection to a broadband network
(> WIRELESS > LAN > 21) ed when ed unit this when isconnected 27) (10BASE-T/100BASE-TX) 34) RÉSEAU LOCAL LAN LAN OUT AV ≥ supplied with the equipment. connected detailsFor to method, therefer about instructions connection ∫ [BT730] ≥ ≥ D C B A environment used. environment or equipment the depending on properly work not may It http://panasonic.jp/support/global/cs/ to refer Point) (Access router Wireless your on compatibilityinformation date to up For DY-WL10Adaptor (optional) whenusing thoroughly it. forRead the LAN the operating instructions Wireless Using Wireless Adaptor LAN (optional) Modem (Broadband) byISP *Provided (Broadband) Modem LAN Cable(not included) point), etc. (Access router Wireless LANAdaptor Wireless
[BT330]
[BT230] WIRELESS LAN ≥ can be used. DY-WL10 (optional) LAN Adaptor Only the Wireless VQT2M13 17
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 18 ページ ２０１０年３月１６日 火曜日 午後５時５７分
STEP 4: AC power supply cord connection Connect only after all other connections are complete.
(For units with PX printed on the packaging) [BT730] VOLT ADJ Wireless system Before connecting the AC power supply cord; 110 127V 220 240V AC IN Set the voltage. ≥Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used.
Main unit
AC IN
The main unit shows SC-BT730 for the U.S.A. and Canada.
A AC power supply cord (included) B To a household AC outlet (For units with PX printed on the packaging) ≥If the power plug does not fit your AC outlet, use the AC plug adaptor (included). If it still doesn't fit, contact an electrical parts distributor for assistance. [BT730] ≥AC power supply cord with a label is for the wireless system. Do not use any other AC power supply cords except the supplied one.
Main unit ≥This unit consumes a small amount of AC power, even when it is turned off. For the U.S.A. and Canada [BT730] [BT330]: approx. 0.05 W* [BT230] [BT235]: approx. 0.1 W* For units with PX printed on the packaging [BT730] : approx. 0.1 W* [BT230]: approx. 0.2 W* *When the “Quick Start” setting is “Off” In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet.
Wireless system [BT730] For the U.S.A. and Canada: approx. 0.2 W For units with PX printed on the packaging: approx. 0.3 W
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.
STEP 5: [BT730] Preparing the wireless system Turn on the wireless system after all connections are complete. Press [POWER C I, BÍ] on the wireless system. Unit on/off button [POWER C I, BÍ] C I: The wireless system is on. POWER WIRELESS LINK BÍ: The wireless system is off.
WIRELESS LINK indicator Wireless system Red: The wireless system is on and the wireless link is deactivated. Green : The wireless system is on and the wireless link is activated. (“ [W] ” is also displayed on the main unit’s display.)
VQT2M13 18 ≥ ≥ ≥ ≥ ≥ Preparation [BT730] system. the for settings basic make promptsto on-screen the Follow necessary settings. The Smart setup / Easy setup assists you to make 6: Easysetup STEP Smartsetup/ [BT230] SC-BT230_330_730P_PC_VQT2M13_eng.book 19 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 19 SC-BT230_330_730P_PC_VQT2M13_eng.book the the seatingactual position. (At ear level when seated.) [BT730] this unit. AV VIDEO 1, (e.g., to 1, suitHDMI, etc.) theto connections Turn videoinput appropriate mode andselect the onyourTV microphone and keepitforfutureuse. microphone theAutospeakersetup theSmartsetup iscompleted,unplug After setup. outputloudtestsignalsduring The speakers noisemayleadtoincorrectsettings. background speakersetup.Excessive aspossibleduringtheAuto Keep asquiet e.g.,
[BT330] [BT235]
[BT330] [BT730] : Smart setup :Smart : Easy setup Easy : : Place the Auto speaker setup microphone at at microphone setup : the speaker Place Auto OK SETUP MIC OK 2 1 ≥ Setting”. Easy “Network perform can you setup”, “Easy or setup” “Smart completing After 3 ≥ setup” in theSetupmenu.( setup” in You “Smartsetup”or“Easy performthissetupanytimebyselecting can via an HDMI cable. via anHDMI supportingHDAVI toaPanasonicTV(VIERA) connected or later Control2 automaticallyretrievedifthisunitis andTVAspectsettingsare Language [BT730] TV Aspect Language [OK]. press [ with settings the make and instructions on-screen the Follow [ Press “Smart setup” or “Easy setup”. “Easy or setup” “Smart the finish to times several [OK] Press [BT330] [BT230] [BT730] Quick StartQuick TV Audio Surround Cinema Speaker Output Select the aspect to suit your TV and preference. and TV your suit to aspect the Select the Select language usedonmenuscreen. it it is requiredto the specify currentsettings. inserted, digital is a transmitter If ([BT730] setting usingthe wireless this * When optional system, speakers. surround Specifythe of positioning the Check if the toCheck connection eachspeaker is valid. Speed of startup from poweroff isincreased. [item with “(TV)”]. TV,from your connection input audio the Select 5.1/7.1ch audio) with video playing (Effective when only) Layout (Speakers Surround position: all directions. from comes sound the if as feeling surround realistic the enhance the function creates soundofto The virtual speakers output. speaker for setting sound surround Make level automatically.output speaker the Adjust is not available.is not
*
[BT330] [BT235] [BT330] [BT235] Í]. only): “Speakers position” is not available. “Speakersis not only): position”
: Speaker check : Speaker
[BT230] Auto Speaker Setup Speaker Auto
[BT230] >
38) Wireless System * Speakers position Speakers 3, 4, 2 , 1] and VQT2M13 19
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 20 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Network Easy Setting When you experience
[BT730] [BT330] [BT230] problems with settings 1 Select “Wired” or “Wireless” and press [BT730] [BT330] [BT230] Access Point Connection Setting [OK]. Access Point Connection Setting Failed to connect to the access point. Network Easy Setting (Connection Check) A conflict with another device occurred. A settings check for home network and Internet connections is now being conducted. Do you want to configure Access Point Connection Please select a connection mode first. Setting again ? Current setting : Wired LAN cable connection: Connect a LAN cable to the unit and select “Wired.” Wireless LAN connection: Insert a compatible Wireless LAN Adaptor to USB port and select “Wireless.” Access point is necessary for Wireless LAN connection. Yes No Wired OK Wireless OK RETURN
If “Wireless LAN Adaptor is not connected.” is displayed, check Display Check the following that the Wireless LAN Adaptor is fully inserted. Alternatively, A conflict with another Please wait a few moments, disconnect and reconnect it. If there is still no change in the ≥ device occurred. and then try again. display, consult your dealer. 2 Follow the on-screen instructions and ≥ Setting of the Wireless router (Access point) for make the settings with [3, 4] and press A time out error occurred. MAC Address etc. [OK]. ≥ The signal may be weak. For wireless LAN connection: Using the USB extension If you are using a Wireless router (Access point) that supports cable included with the WPS, you can easily perform the settings by selecting “WPS Wireless LAN Adaptor, (PUSH button method)”. adjust the position of the Otherwise, perform the settings by selecting “Search for Wireless LAN Adaptor. access point” or “Manual setting” in “Other methods”. An authentication error or a ≥ The SSID* and the time out error occurred. encryption key of the Access Point Connection Setting Wireless router (Access Select a connection method to use with an access point of Wireless LAN. point). Please refer to the operating instructions of the access point about connection methods. ≥ Please wait a few moments, WPS (PUSH button method) and then try again. Other methods ≥ Connection of Wireless LAN p Adaptor Search for access point A device error occurred. OK If there is no improvement in RETURN WPS (PIN code method) symptom, contact our Manual setting Customer Service Center.
≥ WPS (Wi-Fi Protected Setup) is a function that facilitates Network Easy Setting (Connection Check) settings relating to the connection and security of wireless Network Easy Setting (Connection Check) LAN devices. To see whether your Wireless router (Access Complete. 1. LAN cable connection : Fail point) supports WPS, check the Wireless router operating 2. IP address setting : Fail instructions. 3. Connection to gateway : Fail LAN cable is not connected. Please check the connection. Select “Yes” and press [OK] to check network connection again. Select “No” and press [OK] to finish Network Easy Setting. [BT235] Yes No Follow the on-screen instructions and make OK the settings with [3, 4] and press [OK]. Check the Display following 1. LAN cable connection or ≥ Connection of :Fail Connection to access point the LAN cables (> 17) 2. IP address setting :Fail 3. Connection to gateway :Fail
VQT2M13 20 * An SSID (Service set IDentification) is a name used bywirelessLANto setIDentification)isanameused AnSSID(Service * ≥ ≥ ≥ Check) Connection (Internet EasySetting Network ≥ ≥ (Error code: code: B020) (Error server.the to connect to Failed code: B019) (Error server. the find Cannot .I drs etn :Pass :Fail 3. toConnection gateway setting address IP 2. to point Connection access :Fail or connection cable LAN 1. :Fail 3. toConnection gateway setting address IP 2. to point Connection access or connection cable LAN 1. SC-BT230_330_730P_PC_VQT2M13_eng.book 21 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 21 SC-BT230_330_730P_PC_VQT2M13_eng.book Network EasySetting(InternetConnectionCheck) for bothdevices. identify aparticularnetwork.Transmission ispossibleiftheSSIDmatches (Accesspoint). Wireless router withthesettingsof settingsonyourPCinaccordance the network onlineonyourPC,perform Whenyouhavetroublegetting might change. router(Accesspoint) (encryptionlevel,etc.)oftheWireless the settings access. displayed; however, beregardedasillegal usingthesenetworksmay rights forwhichyoudonothaveusage may be networks (SSID*) wireless seachesinawirelessnetworkenvironment, During automatic rights.network forwhichyoudonothaveusage wireless [BT730] [BT730] the Setup menu.( the Setup You “NetworkEasySetting”in by canperformthissetupanytime selecting orrouter. operatinginstructionsofthehub Refer tothe You “Network”.( redo thesesettingsindividuallyusing can Press [OK]. of theerrorandsolutionforit. Please refertotheoperatinginstructionsforcause Cannot findtheserver.(Errorcode:B019) Failed theconnectiontest. - ConnectiontotheInternet:Fail(Errorcode:B019) Complete. OK Display
[BT330] [BT330]
> [BT230] [BT230] 38) After performing network settings on this unit, Afternetworksettingsonthisunit, performing toconnectany Donotusethisdevice ≥ ≥ ≥ Settings” (> Settings” Server of Settings “Proxy again. try and then moments, wait a Please suspended. few been have may service or be the server may busy The Settings” ( DNS / Settings of Address DNS” “IP DNS” and “Secondary “Primary :Pass :Pass Check theCheck following 38) and the router.the 38) and > ≥ ≥ 38) (> Settings“ DNS / Address "IP ofSettings router and theof hub settings and Connection > 38) 38) displayed. unit’s display. Unit will restart andthe following willscreen be Afteris installed, thefirmware on the willbedisplayed “FINISH” place. takes update the while operation any unit orperform the the from AC NOT power DISCONNECT DO Information”) To( unit. this on version firmware the show site isin(This only.) English http://panasonic.net/support/ firmware. the following website and burn it to aCD-Rto update the from firmware latest the download you can then Internet, the If downloading on this unit fails or this unit isnot to connected is displayed. is version anewfirmware the available, When following screen to when connected the Internet via a broadbandconnection. unitThis is capable theof automatically firmware checking charge. of free available are updates These operates. feature a way the improve or add may that unit Occasionally, for firmware this releaseupdated may Panasonic ≥ ≥ ≥ Setup menu. ( Setup menu. You perform can Update Check” to“Off”. (> Update firmwareversion,set“Automatic notwanttocheckforthelatest If youdo theconnectionenvironment. be connecteddependingon may not or theInternet It maytakelonger several minutes. willrequire Downloading http://panasonic.net/support/ following website: For theupdateinformation,pleasevisit Do youwanttostartfirmwareupdate? CurrentInstalledVersion: x.xx LatestOnlineVersion: x.xx Firmware updates Yes Firmware Update > 38) update update Current Installed Version The firmwarewasupdated. OK RETURN anytime by selecting “Firmware Update” in the byselecting“FirmwareUpdate” anytime 38) No OK RETURN : x.xx > 38, “System “System 38, VQT2M13 21
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 22 ページ ２０１０年３月１６日 火曜日 午後５時５７分
STEP 7: Inserting or removing a Reprogramming the media remote control
When other Panasonic products respond to this remote control Change “Remote Control Code” (> 38) on the main unit and the remote control (the two must match) if you place other Panasonic products close together and it responds to this
SD CARD remote control. SETUP MIC To change the code on the main unit. 1 While stopped, press [START]. 2 Press [3, 4] to select “Other Functions” and press [OK]. 3 Press [3, 4] to select “Setup” and press [OK]. 4 Press [3, 4] to select “Others” and press ≥ When inserting a media, ensure that it is facing the right way [OK]. up. ≥ While the reading indicator is displayed, do not turn off the 5 Press [3, 4] to select “Remote Control unit or remove the media. Such action may result in loss of Code” and press [OK]. the media's contents. ≥ When removing the SD card, press on the center of the card 6 Press [3, 4] to select the code (1 or 2) and and pull it straight out. press [OK]. ∫ To switch sources To change the code on the remote control. Press [BD/SD] to select “BD/DVD” or “SD”. 1 While pressing [OK] ≥ If a media is inserted while the unit is stopped, the source Press and hold the numbered button switches automatically depending on the inserted media. (1 or 2), which has the same number you selected in the step 6 for more than 5 seconds. 2 Press [OK].
VQT2M13 22 e.g., BD-Videoe.g., 2 1 menu. thisof unitfunctions Major canbe the from operated START START menu Press [START]. Press Toscreen the exit Input Select Top Menu Top Viewing Picture Playback te ucin Playlists: Other Functions Network Menu Sound(Equalizer) SC-BT230_330_730P_PC_VQT2M13_eng.book 23 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 23 SC-BT230_330_730P_PC_VQT2M13_eng.book [OK]. Press [ Press [START]. Press 3, 4] toselect thepress item and ARC AUX (> RadioFM iPod card SD BD/DVD/CD eachsource. to Switches Card Management: unit’s speakers ( unit’s speakers Play back the contents. Play back Setup: on DVD-VR. ( CAST of VIERA the screen Home the Displays (> (TV)”. or “DIGITAL1 (TV)” IN “ARC (TV)”, either onesource from Select “AUX To TV the from sound enjoy *2 DIGITAL2 IN displayednexttoitemssetforTV is “(TV)” *1 DIGITAL IN1 ( unit’s speakers this (> (> (> unit’s this speakers with devices other with this unit’s speakers ( unit’s speakers this with START Home theater BD-Video 29) 24) 25) 25) 30) AUDIO input. AUDIO “ IN when setforCABLE/SATIN AUDIOinput. (CABLE/SAT)”to DIGITALdisplayed next is * * Other Functions Sound(Equalizer) Input Select Network Top Menu Playback 1 1 : To: thisbroadcasts with enjoy TV : ( > To broadcasts with TV enjoy > Youplay playlists can created : : To enjoy the radio FM 34). OK 36) RETURN * * 1 2 : : To enjoy from audio > To broadcasts TV enjoy 30) > (> 30) 27) > 30) ≥ ∫ Items to be displayedmayvarywiththemedia. Items to Selecting the sourceremote by the control Button EXT-IN RADIO BD/SD iPod AUX FM FM Radio (FM) ( iPod (IPOD) ( DIGITAL1 IN “ARC (TV)” or“DIGITAL (TV)” “ARC IN 1 (TV)”. (TV)”, “AUX either from source one Select To TV the from sound enjoy “(CABLE/SAT)” isdisplayednexttoDIGITAL IN *2 TV AUDIO set for to items next isdisplayed “(TV)” *1 ( (SD) card SD or BD/DVD DIGITAL2 IN ARC when setforCABLE/SATwhen AUDIOinput. input. * * 1 1
(> (> 30) 30) * * > 2 1 1)( (D-IN (D-IN 2)( (D-IN 32) > Source 29) > > > 30) 30) 25) VQT2M13 23
Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 24 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Enjoying sound effects ∫ Adjusting speaker level during play 1 Press and hold [–CH SELECT] to activate the speaker setting mode. from all speakers 2 Press [–CH SELECT] several times to select the speaker. Each time you press the button: Enjoying surround sound L R—) C_) RS_)RB*_) LB*_)LS_) SW ^"""""""""""""""""""""""""""""b effects * [BT730] [BT330] [BT230] When the optional surround back speakers are connected. 1 Press [SURROUND] several times to select L R: Front speaker (left and right: only the balance is the effect. adjustable.) ≥ Press [2, 1] to adjust the balance of the front STANDARD speakers. Sound is output as it was recorded/encoded. C: Center speaker Speaker output varies depending on the source. RS: Surround speaker (right) MULTI-CH RB*: Surround back speaker (right) You can enjoy sound from the front speakers, as well as LB*: Surround back speaker (left) the surround even when playing a 2-channel sound or LS: Surround speaker (left) non-surround sound. SW: Subwoofer MANUAL ≥ The channels not included in the playing audio will not be displayed (subwoofer is displayed even if it is not ≥ The selected effect will only be displayed on the main included). unit. 3 Press [3] (increase) or [4] (decrease) to adjust the 2 While “MANUAL” is displayed, press speaker level for each speaker. [2, 1] and select the desired effect. s6 dB to r6 dB DOLBY PL II MOVIE (Dolby Pro Logic II Movie) ∫ Changing the sound modes Suitable for movie software, or the one recorded in 1 Press [SOUND] several times to select the mode. Dolby Surround. ≥ The selected mode will only be displayed on the main unit. DOLBY PL II MUSIC (Dolby Pro Logic II Music) 2 While the selected mode is displayed Adds 5.1-channel effects to stereo sources. Press [2, 1] and select the desired setting. 7.1CH VS (7.1CH Virtual Surround) EQ: (Equalizer) You can enjoy 6.1/7.1-channel surround-like effect You can select sound quality settings. using 5.1-channel speakers. FLAT S.SURROUND (Super Surround) Cancel (no effect is added). You can enjoy sound from all speakers with stereo HEAVY sources. Adds punch to rock. CLEAR 2CH STEREO Clarifies higher sounds. You can play any source in stereo. Sound will be SOFT output to the front speakers and the subwoofer only. For background music. SUB W: (Subwoofer level) You can adjust the amount of base. 1 (Weakest effect) to 4 (Strongest effect) ≥ The setting you make is retained, and recalled every time you play the same type of source. H.BASS You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal. ≥ The setting you make is retained, and recalled every time you play from the same type of source. C.FOCUS: (Center focus) (Effective when playing audio containing center channel sound.) You can make the sound of the center speaker seem like it is coming from within the TV. W.SRND: (Whisper-mode Surround) You can enhance the surround effect for low volume sound. (Convenient for late night viewing.)
≥ The sound effects/modes may not be available or have no effect with some sources. ≥ You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound VQT2M13 effects/modes off. 24 Press [ Press play function Resume memorized. is position stopped The [ Press contents. and media the depending on work not may functions These ≥ ≥ ≥ will change. displayed information currently being played. youpress Each [STATUS],time the The status giveyouinformation about messages what is pressWhile [STATUS].playing, ∫ ≥ ≥ MENU]. Press [TOP MENU/DIRECT NAVIGATOR] [POP-UP or You Topcan show Direc Menu, ∫ 2 1 television. the Turn on the television the and select appropriate video input on Preparation [BD] Playing video contents Playback ≥ ≥ SC-BT230_330_730P_PC_VQT2M13_eng.book 25 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 25 SC-BT230_330_730P_PC_VQT2M13_eng.book e.g. BD-Video selecting “Pop-up “Pop-up Menu”. selecting and MENU] bypressing[SUB menualso Pop-up appears [ Press [ press you opened or is tray the if is cleared position The dragged and dropped,copiedandpastedtothemedia. dragged and toplaybackAVCHDIt isnotpossible videowhichhavebeen andMPEG2 appear. not onmediaandcontents,thedisplaymaychange ormay Depending screen. [∫STOP] youfinishtopreservetheunit’smotorandyourtelevision when ROTATECONTINUE TO DISCS ARE DISPLAYED.WHILE MENUS Press play function doeswork. not ( BD-J including BD-Video discs On T1 C10:05.14 ∫ T: Title, C: Chapter, Playlist PL:
≥ starts. Play media. the Insert [ Press To status the messages show To show menus ≥ STOP] severaltimes display to “STOP”on unit’s display. [DVD] Other operations during play Current positionCurrent If the menu [ is displayed, press If playdoesnot start, [ press [OK]. and press item the Stop 1 ∫STOP]. 3
PLAY]position. from this restart to [CD] , 4, Í] toturn onthe unit.
[SD] 2 , 1 Elapsed time in the title the in time Elapsed ] to select the item and press [OK]. press and item the select to ] t orPop-upMenu. t Navigator Total time Total 1 0:20.52 PLAY]. 3, > 4, 47), the resume 2 , 1 BD-Video ] to select select ] to Play While paused, press [SEARCH paused,press While Slow-motion ≥ [SEARCH press playing, While Search ≥ [ Press ≥ ≥ speedincreases The up to 5 steps. While playing or paused,press [SKIP ≥ ≥ paused, [ While press ≥ Skip to title,the youwantchapter or track to play. language ( You channel number or soundtrack audio the change can [AUDIO]. Press ≥ Music and MP3: The speed is fixed to a single step. a single to is fixed speed The and MP3: Music Press [ BD-Video and AVCHD: Press [ only. Press [ backward. or forward succession in change hold to and Press the of number skips. press increases Each BD-Video and AVCHD: direction Forward [ Frame-by-frame Skip Search/Slow-motion Changing audio Changing Pause ; ; 1 1 PAUSE]. > PAUSE] again or[ PLAY] to revert to normal playback speed. PLAY] playback normal to revert to PLAY] to revert to normal playback speed. PLAY] playback normal to revert to 45), etc. 45), 2
] ( Forward direction direction [SEARCH Forward ) or 2;) or [1] (;1 1 PLAY] to restart play. 6 6 ] or [SEARCH ] or [SEARCH ] or : 1 ] or [SKIP ] or ). ] ( ;1 5 5 ) only. 5 9 ] . ]. ] ]. VQT2M13 25
Playback Getting started SC-BT230_330_730P_PC_VQT2M13_eng.book 26 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Useful functions Enjoying BD-Live or BONUSVIEW in BD-Video 1 Press [SUB MENU] 2 Select an item and press [OK]. What is BONUSVIEW? BONUSVIEW allows you to enjoy functions such as While DIRECT NAVIGATOR screen is displayed picture-in-picture or secondary audio etc. To display the titles properties (recording Properties What is BD-Live? date, etc.) In addition to the BONUSVIEW function, BD-Live allows you to View enjoy more functions such as subtitles, exclusive images and To select the chapter Chapters online games by connecting this unit to the Internet. To picture Playing still pictures (> 27) ≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc Select To switch to another folder Folder and/or visit their website.
While playing Playing picture-in-picture Screen When black bars are shown at the top, Aspect bottom, left, and right sides of the screen, you To turn on/off secondary video can enlarge the image to fill the screen. 1 Press [DISPLAY]. Top Menu To display Top Menu. 2 Press [3, 4] to select the “Disc” menu and press [1]. Pop-up 3 Press [3, 4] to select the “Signal Type” menu and press To display Pop-up Menu. Menu [OK]. 4 Press [3, 4] to select the “Video” under “Secondary Menu To display Menu. Video” menu and press [1]. ≥ Depending on the played contents if you perform “Screen 5 Press [3, 4] to select the “On” or “Off”. Aspect”, there may be no effect. 6 Press [RETURN] to exit. ≥ When “TV Aspect” (> 37) is set to “4:3” or “4:3 Letterbox”, the “Zoom” effect is disabled.
≥ Depending on the media and contents, displayed items are different.
A Secondary video B Primary video
To turn on/off secondary audio 1 Press [DISPLAY]. 2 Press [3, 4] to select the “Disc” menu and press [1]. 3 Press [3, 4] to select the “Signal Type” menu and press [OK]. 4 Press [3, 4] to select the “Soundtrack” under “Secondary Video” menu and press [1]. 5 Press [3, 4] to select the “On” or “Off”. When “On” is selected, press [1] and then press [3, 4] to select the language. 6 Press [RETURN] to exit.
≥ During search/slow-motion or frame-by-frame, only the primary video is displayed. ≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, secondary audio will not be played (> 36).
VQT2M13 26 ∫ ≥ ≥ 4 3 2 1 3 2 1 account. an on acquiring information for disc the of manual or instruction display screen the Follow content. BD-Live the access to in order created be to account Internet an require may discs Blu-ray on the available content BD-Live Some 7 6 5 ≥ SC-BT230_330_730P_PC_VQT2M13_eng.book 27 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 27 SC-BT230_330_730P_PC_VQT2M13_eng.book “BD-Li cannot berecovered. erased. It be alldatathe SDcardyouuseisformatted, onwill this unit.If on the card format Tothat you recommended it is functions, above use the may be sent to the content provider via the Internet. tothecontentprovidervia may besent theplayerordiscIDs areplayedback, When discssupporting BD-Live (> Deleting data/FormattingDeleting SDcards Insert the disc. SD card an Insert toConnect the network. ( Press [ Press [ Press [START]. card. SD an Insert Press [ Press [ [OK]. press and Card” SD Press [ [OK]. SD card is used as the local storage ( storage local the as used is card SD 36) Internet discswith BD-Live Enjoying v . e Internet Access”may to need e Internet 3 3 2 2 3 , , , , , ] to select “Card Management” 4] and press to “CardManagement” select and [OK]. 4]press to “Other Functions” select ] to 1] to “Start”select and press [OK]. 1] to “Yes”select and press [OK]. “Format or Erase” “BD-Video Data select to 4] Card Management SD card OK RETURN BD-Video DataErase Format thisSDCard. Format SDCard (with 1 GB or more ormore free GB space). 1 (with No. ofFiles6 Free space300MB e changed for certain discs be changedfor certain > 17) > 47). Press [TOPPress NAVIGATOR].MENU/DIRECT To theexit screen 3 2 1 [BD] Playing still pictures Press [STATUS]. To theexit screen [STATUS]press playing, While twice. ∫ (BD-RE, (BD-RE, DVD-RAM/R/R CD-R/RW,DL, SD Card)
press [OK]. press picture and press [OK]. Press [ Press [ Press DVD-RAM BD-RE, and press [OK]. [ press displayed, is menu the If card. SD or disc a Insert Press [ To show the picture properties [DVD]
e.g. JPEG on DVD-RAM JPEG e.g. [CD]
Photo 11/12/2007 Total 3/9 2 , 3, 3, MENU
DIRECT NAVIGATOR DIRECT NAVIGATOR 1 MENU SUB [SD] SUB DVD-RAM(VR) DVD-RAM(VR) ] to display the previous or next still picture. next or previous the display to ] 4, 4 106_DVD Total 8 Total 0009 0005 0001 Play RETURN OK RETURN , Shooting dateShooting 2 2, R
Video rvosNext Previous , 0600 0008 0004 0007 0003 0006 0002 Picture View ] to select the album and and album the select to 1] 1 Album View 2006 912 2006 912 Total13 G Page 001/001 Picture ] to select the still still the select to ] Press [OK]togoPictureView. B 3, Slideshow Video Video ] to select the item item the select to 4] Y Picture Picture Page 02/02 VQT2M13 27
Playback SC-BT230_330_730P_PC_VQT2M13_eng.book 28 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Useful functions Playing music
[DVD] [CD] 1 Press [SUB MENU]. (DVD-R/R DL, music CD, CD-R/RW) 2 Select an item and press [OK]. Insert a disc. While “Album View” or “Picture View” screen is displayed 1 If the menu is displayed, press [3, 4] to select the item Start You can display still pictures one by one at a and press [OK]. Slideshow constant interval. 2 Press [3, 4] to select the track and press Slideshow Display Interval [OK]. Settings Change the display interval. Transition Effect DIRECT NAVIGATOR Music list 0.09 4.30 CD Track1 Set display method. 5 Tracks / Total Play Time 20min54sec Repeat Play No. Track Name Play Time 01 Track1 4min30sec 02 Track2 3min41sec Repeat slideshow. 03 Track3 4min30sec 04 Track4 3min11sec Soundtrack 05 Track5 5min 2sec Music files on an iPod/iPhone or a music CD can be played back as Background Music
during the slideshow. Play RETURN Press [3, 4, 2, 1] to select “Set” and press [OK]. “ ” indicates the track currently playing. Select Root To switch to another higher folder folder ≥ Only if there is a multiple number of higher folders recognizable ∫ Playing a track in another folder Select To select the still pictures in another folder 1 While the “Music list” is displayed Folder Press [SUB MENU]. 2 Press [3, 4] to select “Select Folder” and press [OK]. To Video Playing video contents (> 25) To album To display album view. view ≥ You cannot select folders that contain no compatible tracks.
While playing (except for slideshow) Rotate Right Rotate the still picture. Rotate Left Zoom out Reduce the still picture ≥ This function is only available for small-sized still pictures. Zoom in Cancel “Zoom out”
≥ Depending on the media and contents, displayed items are different. ≥ When a still picture with large number of pixels is played, the display interval may become longer. Even if the setting is changed, the display interval may not become shorter. ≥ When both a music CD and an iPod/iPhone is inserted to this unit, the iPod/iPhone has a priority to be played back as Background Music.
VQT2M13 28 ≥ 2 1 ≥ 2 1 broadcast. a radio Select Preparation ≥ ≥ 3 2 1 stations canbe set. Up to 30 Listening toRadio the Radio SC-BT230_330_730P_PC_VQT2M13_eng.book 29 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 29 SC-BT230_330_730P_PC_VQT2M13_eng.book the same channel preset. the samechannel is storedin whenanotherstationA stationpreviouslystoredisoverwritten startsuntil thefrequency Tuning scrolling. stopsastation isfound. when To hold[SEARCH startautomatictuning,pressand the stationsmanually. is unsuccessful.Preset whenautomaticpresetting “ERROR” isdisplayed last presetstation. “SET OK”is displayed when thestations are set, and theradio tunes to the While listeningto theradio broadcast inthe channels ascending order. starts tuner allthThe preset to is displayed. “AUTO” when button the Release hold [OK]. and Press manually”. * To changethe frequency, stations to refer “Presetting To begin auto with preset the frequency.* current CURRENT: FM87.5). To begin auto withpreset or the (FM87.9 frequency lowest LOWEST: startsearch. preset the auto Press [STATUS] toselect the position to “FM”. toselect [RADIO] Press e.g., 1: [1] e.g., 1: To number a 1-digit select channel. Press the numbered buttonsto a select display the on flashing is “P” While [OK]. Press e.g., 12: [1] e.g., 12: To number a 2-digit select frequency. Press [SEARCH Press Press [RADIO] to select “FM”. Presetting stationsmanually automatically Presetting stations B B [OK]. [2] 6 ] or [SEARCH] or e stations it can receive into into stations canreceive e it 5 ] to select the the select ] to 6 ], [SEARCH5] TUNED: TUNED/STEREO: ∫ 2 1 ≥ To toreturn the original repeat settings, steps 2 1 area. in your stations for frequency correct the over skip to seems tuner the if setting this change MHz. You mayneedto receive broadcasts allocated in 0.1 it MHz, canbe to changed factory setting is The toset 0.2 unit: Main ∫ ≥ is alsocanceled “MONO” will ormonaural stereo be system, selected. broadcast on the Depending unit. main on the displayed be the Press button again theto mode. cancel “AUTO will ST” monaural. becomes sound The “MONO”. display to [AUDIO] Press ∫ Preset them again. Preset them presetfrequencieswillbecleared. After changingthesetting,previously This setting This can forbe preset station. eachbroadcasting Alternatively,[ press e.g., 12: [1] To number a 2-digit select e.g., 1: [1] To number a 1-digit select channel. Press the numbered buttons toselect the “FM”. toselect [RADIO] Press changed. is step and the changes frequency lowest The down. frequency. lowest current button the hold to Continue the show to changes display the seconds a few After hold [SELECTOR]. and Press “FM”. toselect [SELECTOR] Press Display on the main onthe unit Display FM frequencyFM step channels Listening/confirming the preset If noise is excessive is noise If B B [OK]. [2]. selected. orm broadcasting Displayed whenreceivingmonaural broadcasting Displayed whenreceivingstereo W , when youchangethe frequency. ] or X] or [ 2, 1 ]. onaural soundis 1 and 2 . VQT2M13 29
Radio Playback SC-BT230_330_730P_PC_VQT2M13_eng.book 30 ページ ２０１０年３月１６日 火曜日 午後５時５７分
TV Enjoying TV with unit’s Making settings for digital speakers audio input Select to suit the type of audio from the DIGITAL AUDIO IN Preparation terminals on the main unit. Turn on your TV and select the appropriate audio input mode [AUX, ARC, D-IN 1 or D-IN 2] to suit the connections to this Press [EXT-IN] several times to select “D-IN 1” unit. (> 23) (DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).
Surround sound effects ∫ DIGITAL IN 1/DIGITAL IN 2 Press [AUDIO]. You can enhance stereo sources with surround sound effect. MAIN SAP* 1 Press [SURROUND] several times to select M+S* (stereo audio) the effect. * “SAP” = Secondary Audio Program (Only works with Dolby Dual Mono) “MAIN” or “SAP” is not available if “On” is selected in “Digital 2 While “MANUAL” is displayed on the unit’s display ≥ Audio Input”. (> 36) Press [2, 1] and select the desired effect. Surround modes to enjoy TV audio or stereo ∫ DIGITAL IN 2 sources from all speakers: Press [STATUS]. ≥ DOLBY PL II MOVIE CABLE/SAT AUDIO : ≥ DOLBY PL II MUSIC Select when an HDMI connected STB is selected on the ≥ S.SURROUND TV, "D-IN 2" input is automatically selected.(> 31, “Setting ≥ Cinema Surround (> 19) the audio link with the STB”). For more detailed information on this operation, please refer to the “Enjoying surround sound effects” section on page 24. ≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not output from the HDMI AV OUT terminal. Sound modes
You can adjust the mode depending on the source or situation. 1 Press [SOUND] several times to select the mode. 2 While the selected mode is displayed on the unit’s display Press [2, 1] and select the desired setting. For more detailed information on this operation, please refer to the “Changing the sound modes” section on page 24.
VQT2M13 30 ≥ ≥ ≥ ≥ 2 1 ≥ control; remote the With ∫ above. pointsthe sett or connection the Whenever 5 4 3 2 1 ≥ control; remote the With ∫ 3 2 1 Preparation (VIERA Link the TV Linked operations with connected equipment for operational operational equipment details.for connected with an for cable. HDMI instructions See operating the Youuse can this functionconnecting by the equipment Panasonic TV (VIERA) under “HDAVI Control”. of offers thisunit, that and a linked operations VIERA Link “HDAVI Control” is a convenient function VIERA Link VIERA Link“HDAVI isVIERA What Control”? SC-BT230_330_730P_PC_VQT2M13_eng.book 31 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 31 SC-BT230_330_730P_PC_VQT2M13_eng.book above and then repeat steps repeat then and above operations, operations, “CABLE/SATselect in OFF” AUDIO step want changetheto deviceallocated for the linked if you or ischanged TV onthe STB the channelof input If the theSelect input STB onthechannel TV. the Select actual audio TV on theconnection main unit. supporting VIERA Linkfunction. supporting equipment toindividual manualsforothermanufacturers’ Please refer HDAVIcompatible withPanasonic’s conventional equipment. for Panasonic’sHDAVI Controlcompatibleequipment.Thisstandardis “HDAVI 5”isthe neweststandard(currentasofDecember, Control 2009) This unitsupports“HDAVI Control5”function. supports HDMICECcannotbeguaranteed. such,itsmanufacturers’equipmentthat added. As operationwithother wehavedevelopedand isauniquefunctionthat Electronics Control), industrystandardasHDMICEC(Consumer HDMI whichisan known “HDAVIVIERA Link functionsprovidedby Control”, basedonthecontrol Press [STATUS] to select “CABLE/SAT AUDIO ON”. [EXT-IN]Press 2”. “D-IN toselect Press [ Press [ [OK]. Press [ Press [ and[OK]. press Functions” [START]Press and press [ thisprocedure. repeat are changed, settings or connection the when Also “HDAVIproperly.the works function Control” unit’s this select sothat TV input channelonthe connected Turnall “HDAVI on and equipment compatible Control” (e.g., equipment TV). “HDAVIthe connected the Set on operations Control” “On”.) is default setting (The ( “On” to Link” “VIERA Set Settingthe with audioSTB link the Settingthe with audioTV link the Setting the audio link theaudio Setting 3 2 3 3 TM , , , , ] to select “TV / Device Connection” and press and press Connection” Device / “TV select to4] ] to switch “AUX”,“ARC” or “DIGITAL IN 1”. “DIGITALIN or “AUX”,“ARC” switch 1] to Input”. Audio “TV select to 4] 4] and [OK]. to “Setup” select press is a new name for EZ Sync TM “HDAVI Control > 3 1 ings reconfirm ings are changed, 37). 37). , to 2 ] to select “Other “Other select 4] to . TM TM . ”) 2
≥ Delay”). “Audio ≥ ≥ ≥ ≥ ≥ areactive. speakers TV TV ≥ active. are unit’s speakers This Home theater settings. menu TV the using by speakers TV the or speakers unit’sYouthe from is output audio whether select can Press [ mode; standbyin are TV the and unit the While button. a of press single You turn can on this unit and the TV, and start playwith a *2 “D-IN 2” works 2”works onthedepending “D-IN setting in “Setting the *2 setting on the depending 1” works “D-IN or “ARC” “AUX”, *1 ≥ is performed screen display the uses that action an jWhen starts unit on the play jWhen turn on. automatically action. When the corresponding is off,TV the will TV the display and channel input the switch will automatically theWhen following operations theare performed, television enabling youto enjoy smooth for audio the ( picture adjusted, automatically video is and audio between Delay ≥ This function works only when “BD/DVD”, “SD”, “AUX” “SD”, function worksonlywhen“BD/DVD”, This “D-IN 1”(DIGITAL“D-IN IN 1) activated. If youturn off this unit, willTV speakers be automatically button onthe TV’s control. remote You ormute settingvolume using the the cancontrol volume Audio Audio output is2-channel audio. “0”. to set is unit this of volume The select, “AUX” onand unit the turn automatically will menu TV inthe unit’s this speakers to speakers this When unit isin standby changingthe mode, TV automatically switchautomatically to“AUX” will unit this mode, tuner TV toinput TV the switch you When screen) Navigator Direct (e.g., chosen. ( chosen. w work not function does This 2) screen may beblankforseveralseconds. screen may andTVspeakers,the betweenthisunit’s speakers When switching “ARC” IN 1) *2 audio link with the STB”. the link with audio in “Setting the audio link with the TV”. is selected as the source on this unit. on this source the as is selected Speaker control play One touch (for HDAVI 3or later) Control function lip-sync Automatic (Power on link) switching input Automatic *1 1 or “D-INor (DIGITAL 2” IN2) *1 , “D-IN1” (DIGITAL 1) IN PLAY]. > 33) *1 as the source. the as *1 hen the iPod/iPhone selector hen the selector is iPod/iPhone , “ARC” *1 *2 or “D-IN 2” (DIGITAL IN IN (DIGITAL 2” “D-IN or . *1 or “D-IN 1” (DIGITAL 1” or “D-IN *1 , “ARC” > 37, 37, *1 , *1 or or VQT2M13 31
TV SC-BT230_330_730P_PC_VQT2M13_eng.book 32 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Other devices Power off link Using the iPod/iPhone
All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you switch the iPod/iPhone Connection television off. Preparation Playing music continuously even after turning off the TV ≥ Before connecting/disconnecting the iPod/iPhone, turn the (When the unit is connected to a Panasonic TV (VIERA) that main unit off or reduce the volume of the main unit to its supports HDAVI Control 2 or later.) minimum. Select “Video” in “Power Off Link” (> 37) ≥ Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone. Easy control only with VIERA 1 Push # to open the iPod/iPhone lid. remote control 2 Connect the iPod/iPhone (not included) firmly. Only TV supports “HDAVI Control 2” or later iPod/iPhone By using the TV remote control, you can play discs using the 2 “Control Panel” and display the Top Menu or Pop-up Menu, 1 etc. ≥ This works only during “BD/DVD” or “SD” playback and resume modes.
1 Press [SUB MENU]. Main unit
A Dock adapter (not included) Control Panel ≥ Attach the dock adapter until firmly fitting into the Screen Aspect dock. The adapter should be supplied with your 2 Select an item and press Top Menu iPod/iPhone for the stable use. [OK]. If you need an adapter, consult your iPod/iPhone Pop-up Menu dealer. Dock for iPod/iPhone SUB OK B ≥ The sub menu may not appear MENU RETURN while the Top Menu for BD-Video or DVD-Video is displayed. About recharging the battery ≥ iPod/iPhone will start recharging regardless of whether this unit is on or off. ≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone charging in main unit standby mode. ≥ The buttons that you can use for this unit vary depending on the TV. For ≥ Once fully recharged, additional recharging will not occur. details, refer to the operating instructions of the TV. ≥ The operation of this unit may be interrupted when you press incompatible Compatible iPod/iPhone (as of December 2009) buttons on the TV remote control. ≥ Compatibility depends on the software version of your iPod/ ≥ Depending on the menu, some button operations cannot be performed iPhone. from the TV’s remote control. Name Memory size iPhone 3GS 16 GB, 32 GB iPhone 3G 8 GB, 16 GB iPod nano 5th generation (video camera) 8 GB, 16 GB iPod touch 2nd generation 8 GB, 16 GB, 32 GB, 64 GB iPod classic 120 GB, 160 GB (2009) iPod nano 4th generation (video) 8 GB, 16 GB iPod classic 160 GB (2007) iPod touch 1st generation 8 GB, 16 GB, 32 GB iPod nano 3rd generation (video) 4 GB, 8 GB iPod classic 80 GB iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB iPod 5th generation (video) 60 GB, 80 GB iPod 5th generation (video) 30 GB iPod nano 1st generation 1 GB, 2 GB, 4 GB iPod 4th generation (color display) 40 GB, 60 GB iPod 4th generation (color display) 20 GB, 30 GB iPod 4th generation 40 GB iPod 4th generation 20 GB iPod mini 4 GB, 6 GB
VQT2M13 32 To exit, press [TOP MENU/DIRECT NAVIGATOR]. ≥ models. amongiPod/iPhone The may vary operation menu. You can use the remote control to operate the iPod/iPhone ≥ ≥ 4 3 2 1 3 2 1 2 1 features Totouch/iPhone iPod the use ≥ ≥ ≥ Preparation SC-BT230_330_730P_PC_VQT2M13_eng.book 33 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 33 SC-BT230_330_730P_PC_VQT2M13_eng.book [ [RETURN]: To return to the previous menu. To [OK]: menu. next the to go appropriate video input mode. video input appropriate the select Toand TV the on turn picture, the display TV. your for settings output photo/video appropriate the make to iPod/iPhone menu the Operate To view photos/videos fromthe iPod/iPhone the source. select to [iPod] Press isselected. source “IPOD” the that sure Make 3 [OK]. Press [iPod] to select “IPOD”. select to [iPod] Press screen playback music e.g., ≥ ≥ [ Press music menu orvideos menu. [STATUS]Press the to select times several “IPOD”. select to [iPod] Press The picture will be displayed on your TV.on your displayed willbe picture The aPlay slideshowiPod/iPhone. onyour input in. tovideo the TV Switch “ALL” on the unit’s display. [STATUS]Press to select times several to operate. to touch/iPhone the iPod Select touch/iPhone. iPod the on button Home the Press iPod/iPhone Playback , Press [ this Repeat step until the title selected starts playback. 4 Enjoy photos Enjoy music/video ]: To items menu navigate 2 3, , 1 iPod 1:00 ] to select an item and press press and item an select to 4] ] to display the previous or next page. next or previous the display to ] Ronaldo Repeat (All) Shuffle (Albums) Happy days Good morning features on the touch screen 45 of1230 -2:30 5 4 3 2 1 ≥ only) playback video and music (For ≥ ≥ Surround soundeffectareavailable( Surround andsoundmode display)” isselected. doesnotworkwhen“All(iPod This function iPod/iPhone. the same untilchangesaremadeon oftheplaybackmodewillbekept The setting (Press and hold) and (Press [SEARCH SEARCH [OK]. [OK]. press then and [OK]. press [OK]. [ Press etc.) repeatedly.Albums, se from Play all songs/videos All: Play a singlesong/video repeatedly. One: Repeat order. inrandom an album on songs all Play Albums: order.random on iPod/iPhone in songs all Play Songs: (For music only.) playback Shuffle [ Press [ Press [ Press [START]. Press [SKIP [ SKIP [ ; Other methods of playback Other methods Basic controls [ Buttons 1 ∫ PAUSE] TP Pause STOP] LY Play PLAY] 9 : 3, 5 3, 3, 3, 6 ] , ] 4 , 4 4 4 ] to select the setting and press press and setting the select ] to ] to select an item and press press and item an select ] to Mode” “Playback select ] to then and “Menu” select ] to Skip Search lected items (e.g., Playlists, (e.g., items lected Functions > 24). VQT2M13 33
Other devices TV SC-BT230_330_730P_PC_VQT2M13_eng.book 34 ページ ２０１０年３月１６日 火曜日 午後５時５７分
EnjoyingAdvanced operations VIERA Playback menu TM CAST 1 Press [BD/SD] to select “BD/DVD”. 2 Press [DISPLAY]. You can access a selection of Internet services from the Home e.g., BD-Video screen with VIERA CAST, for example YouTube, Picasa Web Albums. (Current as of December 2009) Disc Signal Type Play Subtitle Off Main 1ENG Video Preparation Subtitle Style - Angle - ≥ Network connection (> 17) Audio ≥ Network setting (> 20) Menus Items Settings 1 Press [VIERA CAST]. Press [ , ] to select the menu and press Message is displayed. Please read these instructions 3 3 4 carefully and then press [OK]. [1]. 2 Press [3, 4, 2, 1] to select the item and 4 Press [3, 4, 2, 1] to select the item and press [OK]. press [1]. Operable buttons: 5 Press [3, 4] to select the setting. [3, 4, 2, 1], [OK], [RETURN], colored buttons, Some items can be changed by pressing [OK]. numbered buttons To exit the screen VIERA CAST Home screen; Press [DISPLAY].
New York, NY Weather COMING SOON Depending on the condition of the unit (playing, stopped, Settings W 17 28° mph etc.) and media contents, there may be some items that you cannot select or change.
Featured Videos Featured Photos Regarding Language, Audio attribute and Video attribute :
COMING SOON (> 45) Top Movie Rental Bloomberg 15min. delay XXXXXX TELEVISION Top TV Show XXX 7465.95 -89.68 XXXXXX XXX 778.94 -9.47998 XXX 1442.82 -25.15 Disc Images are for illustration purposes, contents may change without notice. Signal Type Primary Video
To return to VIERA CAST Home screen Video The recording method of original video Press [VIERA CAST]. appears. To exit from VIERA CAST Soundtrack Select the type of audio or language. Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR]. ≥ When the Blu-ray disc logo is selected on the Home screen, Secondary Video the playback source will be changed and go back to the Video Select on/off of images. The recording source previously selected. method of original video appears. Soundtrack Select on/off of audio and the language. ≥ In the following cases, settings are possible using “Internet Content Settings” (> 38) – When restricting the use of VIERA CAST. Video – When the audio is distorted. The recording method of original video appears. – When wrong time is displayed ≥ If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is Soundtrack recommended. Show or change the soundtrack. ≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the Subtitle VIERA CASTTM function. (> 21) ≥ VIERA CASTTM home screen is subject to change without notice. Turn the subtitle on/off, and change the language depending ≥ The services through VIERA CASTTM are operated by their respective on the media. service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. Subtitle Style ≥ All features of websites or content of the service may not be available. Select the subtitle style. ≥ Some content may be inappropriate for some viewers. ≥ Some content may only be available for specific countries and may be presented in specific languages. Audio channel Select the audio channel number. (> 25, “Changing audio”)
Angle Select the number of the angle.
VQT2M13 Some items may be changed only on the disc specific menu. (> 25) 34 ≥ output at 24p. and on material Movies other recorded DVD-Video at 24pare 24p ≥ the oftype material being played. output the ofSelect suit progressive method conversion to for Progressive The issharp and picture detailed. Detail Clarity theSelect picture modeduring quality play. Picture toexit.[RETURN] Press following. the Displays Playback Information Window random. play to not or whether Select Random cancel. “Off” to Select differ depending on the type media. of displayed items The repeat. to you want which item the Select display.) whenthe(Only elapsed time is being displayed on the unit’s Repeat Play SC-BT230_330_730P_PC_VQT2M13_eng.book 35 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 35 SC-BT230_330_730P_PC_VQT2M13_eng.book Only when you have selected “On” in “24p Output” ( Output” in “24p “On” selected have when you Only “Video”. to “Auto“ theWhen content isdistorted changethe settings from *&/+ Play Video HDMI output information. output HDMI statusSettings of “Digital AudioOutput”( disc. of attribute information Audio/video > 36). > 37) ≥ canbe terminal) OUT stopped. analog videocircuit (via VIDEO the because sound clearer produces it image, outputting to connected via TV When AVHDMI terminal for OUT High Clarity Sound hear. to easier volumeof The the channelis center dialog raised to make Enhancer Dialog offrequency portion the audio. feature givesyoubright This less) or kHz 48 at recorded (Discs Sound Effects *2 This hasnoeffect II. This function whenthetypeofaudioisDolbyPro Logic *2 audioisoutputfromtheHDMIAV When OUTterminalthisfunctionis *1 Re-master 3 Re-master 2 Re-master 1 Re-master Sound” ( Sound” Clarity “High in “Enable” selected you have when Only Audio DTS-HD” issetto“PCM”.(> DTS-HD” TrueHD”effective onlywhen“DolbyD/DolbyD+/Dolby or“DTS/ > 37). 1 *2 *1, *1 Classical Jazz and Pop rock er sound by increasing the er soundbyincreasing the high 36) VQT2M13 35
Advanced operations SC-BT230_330_730P_PC_VQT2M13_eng.book 36 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Setup menu Menu Language Choose the language for disc menus. Change the unit’s settings if necessary. The settings remain ≥ Enter a code (> 45) with the numbered buttons when you intact even if you switch the unit to standby. select “Other ¢¢¢¢”.
1 Press [START] and press [3, 4] to select BD-Live Internet Access (> 27) “Other Functions” and press [OK]. You can restrict Internet access when BD-Live functions are 2 Press [3, 4] to select “Setup” and press used. ≥ If “Allow ( Limited )” is selected, Internet access is permitted [OK]. only for BD-Live contents which have content owner Setup certificates. Disc Video Video Audio Display Still Mode (paused video) TV / Device Connection Select the type of picture shown when you pause playback. Network Others Auto Automatically selects the type of picture shown. OK Field Select if jittering occurs when “Auto” is selected. RETURN Frame Select if small text or fine patterns cannot be 3 Press [3, 4] to select the menu and press seen clearly when “Auto” is selected. [OK]. Seamless Play 4 Press [3, 4] to select the item and press The chapters segment in playlists are played seamlessly. [OK]. ≥ Select “On”, when the picture freezes for a moment at the If there are any other items, repeat these steps. chapters segment in playlists.
5 Press [3, 4, 2, 1] to select the option and Black Level Control press [OK]. Select lighter or darker for adjusting the black level control to the desired setting for picture enhancement. ≥ There may be differences in operation methods. If this happens, follow the on-screen instructions for the operation. Audio About the password The password of the following items are common. Dynamic Range Compression Don’t forget your password. You can listen at low volumes but still hear dialog clearly. ≥ “DVD-Video Ratings” (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) ≥ “BD-Video Ratings” ≥ “Auto” is effective only when playing Dolby TrueHD. ≥ “Lock” (> 38) Digital Audio Output Disc Press [OK] to show the following settings.
DVD-Video Ratings Dolby D/Dolby D +/Dolby TrueHD Set a ratings level to limit DVD-Video play. DTS/DTS-HD ≥ Follow the on-screen instructions. Enter a 4-digit password Select the audio signal to output. with the numbered buttons when the password screen is ≥ Select “PCM”, when the connected equipment cannot shown. decode the respective audio format. BD-Video Ratings ≥ Not making the proper settings may result in noise. Set an age limit of BD-Video play. BD-Video Secondary Audio ≥ Follow the on-screen instructions. Enter a 4-digit password with the numbered buttons when the password screen is Select whether to mix or not mix the primary audio and shown. secondary audio (including the button click sound). (> 26) ≥ If “Off” is selected, the unit outputs the primary audio only. Audio Language Choose the language for audio. Digital Audio Input Select whether to receive the digital sound as PCM or the If “Original” is selected, the original language of each disc ≥ original sound format. will be selected. Select “On” if the sound is cut off intermittently. ≥ Enter a code (> 45) with the numbered buttons when you select “Other ¢¢¢¢”. Downmix Subtitle Language Select the downmix system to enjoy multi-channel or Choose the language for subtitle. 2-channel sound. ≥ Select "Surround encoded" to enjoy the surround sound. ≥ If “Automatic” is selected and the language selected for ≥ There is no downmix effect on the bitstream audio signal. “Audio Language” is not available, subtitles of that language ≥ The audio will be output in “Stereo” in the following cases. will automatically appear if available on that disc. – AVCHD playback Enter a code (> 45) with the numbered buttons when you ≥ – Playback of secondary audio (including the button click select “Other ¢¢¢¢”. VQT2M13 sound). 36 ≥ ≥ Audiois enabled reformatting in the following cases: ratio image: ratio to connected When a 4:3 and television aspect playing 16:9 toSet the match type of connected. television TV Aspect about Information the software usedbythis unit is displayed. License ≥ 0) (Vol FL Control the andCanada) (For U.S.A. ≥ unit’s the display. of brightness the Changes FL Display ≥ is This to burn-inon prevent screen. the Screen Saver Function messages. on-screen and menus these for language the Choose On-screen Language toChoose whether showstatus automatically.messages Status Messages toRefer page 39 Speaker output. audio the bydelaying between videoandaudio the is corrected Mis-sync Audio Delay ≥ can terminal) OUT analog video stopped. be (viaVIDEO circuit the because sound clearer produces it image, outputting to connected TV When via AVHDMI terminal for OUT Sound High Clarity ≥ and playedbackat 7.1ch. soundwith 6.1ch Surround or less is automatically expanded 7.1ch Audio Reformatting 4:3 ratio image: ratio 4:3 playing and television 16:9 to widescreen a connected When 16:9 4:3 Letterbox 4:3 SC-BT230_330_730P_PC_VQT2M13_eng.book 37 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 37 SC-BT230_330_730P_PC_VQT2M13_eng.book TrueHD LPCM. or theWhen audio is DolbyDigital, Dolby Digital Plus, Dolby youhaveselected in “DigitalWhen “PCM” Audio Output”. will be at 5.1ch.) playback audio, 6.1ch of case the in that channels of (Note volume is adjusted to “0”. to adjusted is volume offthe when willturn unit’s the display is selected, “On” If some operations. when youperform is theIf “Auto” displayis selected, but brightens dimmed to switches the screen other states automatically. minutes the or more, displayed If there is no foroperation 5 this issetWhen to “On”: menuto “On”. ( playback toSet “Enable” and then set “High Clarity on Sound” the is sound selected, "Off"If is TV / Device ConnectionTV Display picture. the of bottom and top bandsappearat theBlack Letterbox”. “4:3 output as is video playing When BD-Video, fillspicture the screen. sidesare The offcut so the center of the screen. the of center Video is displayed asa 4:3 ratio image in the > 35) played overthe original number Press [OK] to show the following settings. following the show to [OK] Press HDMI Connection indicated on the screen as “ as screen the on indicated byt The supported items ResolutionHDMI the following conditions: the off,When is TV turned this will unit off turn during except Video: theWhen off,is TV turned this unit off turn will automatically. Video/Audio: compatible equipment.) Link “HDAVI VIERA connected Control” the of settings Link operation ( VIERA theSelect desiredpoweroff link setting thisof unit for Power Off Link this function isconnected. supports thatTV a when method optimal the to adjusting willoutput TV the content, playback on the Depending Contents Type Flag connected. is Color Deep supports that television a when use is Color whether to Deep for This setting output selecting Deep ColorOutput ≥ “HDAVIthat supports device a to Control”. cable an HDMI use “HDAVIwith connected to Set when function Control” Link VIERA when "Off" is selected. speakers system's the output through willbe Audio HDMI. from output audio to or not selects whether setting This HDMI Audio Output cable. an HDMI using connected is unit the signal when image the of conversion color-space selecting for is setting This HDMI Color Mode ≥ ≥ 24p. at output are 24p at recorded and output using material movies other cable, HDMI an 1080/24p supporting TV a to is connected unit this When Output 24p ≥ ≥ be is selected, the images may distorted. j j j j j Select “Off” when you do not want use“HDAVI “Off” donot Select to whenyou Control”. images are output at 60p. BD-VideoWhen than images other 24p are played, “24p” in “Video” ( “24p” set also then and “On” to playing DVD-Video, set When 1080p compatible. be also it must equipment, other through HDTV an to Television). Definition (High HDTV isconnected unit If this need to the connect unit directly to compatible1080p To you 1080p, to highdefinitionvideoup-converted enjoy television. connected the to suited best resolution If “Auto” selectsis selected, theautomatically output SAT Link) for VIERA setting AUDIO CABLE/ 2” (DIGITAL (non-selected “D-IN 2) mode IN Link) VIERA for setting AUDIO TV (non-selected 1”(DIGITALor “D-IN “AUX”,“ARC” IN 1)mode Radio mode mode iPod/iPhone CD or audioplayback MP3 > 35) to “On”. 35) > he connected devices devices he connected are 32). (This works dependingon 32). works the (This ”. ¢”. anyitem When without “ ¢ ” VQT2M13 37
Advanced operations SC-BT230_330_730P_PC_VQT2M13_eng.book 38 ページ ２０１０年３月１６日 火曜日 午後５時５７分
TV Audio Input Select the TV audio input to work with the VIERA Link Others operations. (For units with PX printed on the packaging) Network Off Timer Select how long the unit remains on when it is not being used. Network Easy Setting (> 20) ≥ Effective only when “BD/DVD” or “SD” is selected as source. Network Settings Remote Control Code Perform network-related settings individually. Change the remote control code, when other Panasonic Press [OK] to show the following settings. products react to this remote control. Quick Start* LAN Connection Mode Speed of startup from power off is increased. Select connection method. ≥ Internal control unit will be powered when it is set to "On”, so contents of the following will be different from the time it is [BT730] [BT330] [BT230] Access Point Connection Setting set to “Off”. This allows the Wireless router (Access point) and – Idle power consumption will increase. (about the power connection settings to be set and the current connection consumption > 48) settings and connection state to be checked when a wireless connection is used. *The cooling fan may turn slowly to prevent overheating of internal parts. [BT730] [BT330] [BT230] Connection Setting * Depending on the power conserving setting activated on The Wireless router (Access point) connection wizard will the TV, this function may have less effect when the unit is be displayed. started by the power on link function. (> 31)
[BT730] [BT330] Smart setup / IP Address / DNS Settings [BT230] [BT235] Easy setup (> 19) This is for checking the state of the network connection and You can execute basic settings to optimize your home theater setting the IP address and DNS-related. system. Press [OK] to show the respective setting. ≥ “Connection Speed Setting" is enabled only when “Auto Restore Default Settings Detect Connection Speed” is turned “Off”. This returns all values in the Setup menu and the playback menu, except for “Remote Control Code”, “On-screen Proxy Server Settings Language”, “IP Address / DNS Settings”, “Proxy Server Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video This is for checking the state of connection with the Proxy Ratings” to the default settings. server and performing settings. Press [OK] to show the respective setting. System Information Display the following items. Internet Content Settings (> 34) (VIERA CAST) – Firmware version of this unit Press [OK] to show the following settings. – [BT730] [BT330] [BT230] Wireless LAN module of optional Wireless LAN Adaptor Lock You can restrict the usage of VIERA CAST. Firmware Update (> 21) ≥Follow the on-screen instructions. Enter a 4-digit Press [OK] to show the following settings. password with the numbered buttons when the password screen is shown. Automatic Update Check Audio Auto Gain Control When this equipment remains connected to the Internet, it Volume that is different depending on the contents is will check for the latest firmware version when it is turned on adjusted automatically to the standard volume while using and you can update it if necessary. the VIERA CAST. ≥Depending on contents, this function effect will not work. ≥Select “Off” when the audio is warped. Update Now Time Zone You can update the firmware manually. By selecting the time zone, it is possible to set the unit’s time to match your location. ≥Some VIERA CAST contents require the time zone to be set. Set the time zone if necessary. DST Select “On” when using Daylight Saving time.
MAC Address Displays the MAC address of this unit.
VQT2M13 38 2 1 difference. the up for make to time delay the adjust tablerelevant and differencein the If either distance distance the from seating position. subwoofer, the same the for be should except speakers, listening optimum withFor 5.1-channel allsound, the Delay time SC-BT230_330_730P_PC_VQT2M13_eng.book 39 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 39 SC-BT230_330_730P_PC_VQT2M13_eng.book box ( ) and ) [OK]. press box ( C [BT730] B A setting 5.1ch e.g., [ Press D C B A distance listening Primary C: B A [OK]. [ Press e.g., 7.1ch setting 7.1ch e.g., A Speaker settings Left Surround back (LB), Right Surround back (RB) Left Right back(LB), Surround back Surround Right(RS) Surround Left (LS), Surround (C) Center pr constant of Circle position speaker Ideal position speaker Actual room dimensions Approximate Center speaker Center
prx 7 m( t in.) ft. 6 (5 cm 170 Approx. in.) ft. 5 (4 cm 136 Approx. in.) ft. 4 (3 cm 102 Approx. [BT330] ms prx 4c 1f.1i. . ms 1.0 in.) ft. 2 (2 68cm Approx. in.) ft. 1 (1 34cm Approx. 0.0 3, 3, A 4 4,
Difference [BT230] or L ] to select the setting and press press and setting the select ] to LS A Complete B 2, LS LB Complete L Test L LS Test LS is less than than is less dB dB ms 0.0 A 1 0 0 C C dB ms 0.0 0 imary listening distance listening imary B ] to select the distance distance the select to ] C RS RS SW R ms ms 0.0 0.0 C ms 0.0 C C D ( : : > dB dB dB dB B C 0 0 0 0 dB dB dB 0 0 0 RS below), findbelow), the RS RB SW R SW R Setting . ms 5.0 ms 4.0 ms 3.0 . ms 2.0 2 1 ) audio) multi-channel playing when (Effective Volume (Channel balance) ( 2 1 ∫ [BT730] Press [ To setting speaker the finish 3 e.g., 5.1ch setting 5.1ch e.g., speaker. The volumecanbe The between adjusted [ Press listening to testsignal the While is output. signal test A [OK]. press and “Test” Select C B A test signal The stops. [OK]. Press Set the delay time of the surround back speakers. back surround the of time delay the Set from seatingand the backspeakers the position. surround the distanceCheck difference bothof the front speakers When using the 7.1ch speaker system speaker 7.1ch the using When ≥ ≥ B play”. during level speaker “Adjusting 24, page see volume, subwoofer. the for is output signal ToNo its adjust respectively.volume speaker (R) Front and (L) Front eachspeaker Set level according to volumeof the the Adjusting speaker level speaker Adjusting
3 [BT330] Left Surround (LS), Right Surround Right Left (LS), Surround (RS) Surround Test (C) Center [BT730] speakers/ Surround , prx 1 m(6f.8in.) ft. 8 (16 510 cm Approx. prx 4 m(1f.1in.) 1 ft. (11 340 cm Approx. 4, prx 7 m( t n)50ms 5.0 in.) 6 ft. (5 170 cm Approx. 3, 2
[BT230]
[BT330] , 1 4 Difference ] to select “Complete” and press [OK]. press and “Complete” select to ] Complete ] to adjust the volume of each each of volume the adjust to ] L Test LS
[BT230] dB ms 0.0 0 Surround back speakers back Surround ms 0.0 C dB 0 dB dB dB 0 0 0 r6 dB to RS SW R 00ms 10.0 50ms 15.0 Setting s 6 dB. VQT2M13 39
Advanced operations SC-BT230_330_730P_PC_VQT2M13_eng.book 40 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Optional speaker settings [BT730] Speaker installation Center speaker option Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall. ≥ The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in [BT330] [BT230] [BT235] damage to the wall and speakers. Center speaker ≥ Do not attempt to attach these speakers to walls using methods other than those described in this manual. 1 Drive a screw (not included) into the wall. A At least 30 mm (1 3/16q) B ‰ 4.0 mm (5/32q) C ‰ 7.0 mm to ‰ 9.4 mm (9/32q to 3/8q) D Wall or pillar E 5.5 mm to 7.5 mm (7/32q to 5/16q) K 117 mm (4 19/32q) 7 5 L 209 mm to 211 mm (8 /32q to 8 /16q ) 2 Fit the speaker securely onto the screw(s) M 97 mm (3 13/16q) N 18.8 mm (3/4q) with the hole(s). 21 O 17 mm ( /32q) e.g., [BT730] Front speaker P 99 mm to 101 mm (3 29/32q to 3 31/32q ) DO NOT DO ∫ To avoid speaker dropping [BT730]: Front speaker, Center speaker [BT330] [BT235]: Front speaker ≥ In this position, the ≥ Move the speaker so e.g., [BT730] Front speaker speaker will likely fall if that the screw is in this moved to the left or right. position.
Front speaker Attach to a wall without the base and the stand. [BT730] [BT330] [BT235] A String (not included) B Screw eye (not included) C Less than 10 cm (3 15/16q) D Rear of the speaker ≥ Consult a qualified building contractor to avoid damage to the wall or speakers. 3 ≥ Use a string of less than ‰ 2.0 mm ( /32q), which is capable of supporting over 10 kg (22 lbs). Reattaching the speaker cable
[BT330] [BT235]
Leave about 120 mm (4 23/32 ) [BT730] [BT330] [BT235]: q Surround speaker [BT230]: Front speaker and surround speaker Insert the cable Pull out the cable from the bottom. through the hole. F 97 mm (3 13/16q) 9 11 G 210 mm to 212 mm (8 /32q to 8 /32q ) VQT2M13 H 72 mm (2 27/32q) 40 I 349 mm to 351 mm (13 3/4q to 13 13/16q ) 1 J 26 mm (1 /32q) If still unable to power the unit off, disconnect the power cord, cord, off,unit power the powerdisconnect unable to jIf still ≥ control The workremote properly.doesn’t ≥ preset factory To the to settings all return ≥ preset To factory the to return 5 seconds. than more and[ control hold [SKIP off, and press is unit the While mayhaveThe unit aproblem. ∫ andhold Press [POWER ∫ ≥ ≥ The following donot indicate problem a with this unit: following steps. Before requesting service, please perform the Troubleshooting guide Reference ≥ (For units withPX printed onthe packaging) (For and theCanada) U.S.A. SC-BT230_330_730P_PC_VQT2M13_eng.book 41 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 41 SC-BT230_330_730P_PC_VQT2M13_eng.book wait 1 minute, then reconnect the power cord. power the reconnect then minute, 1 wait Change the Change on thecode control. ( remote different usingcodes. are main unit and control remote The [ VOLUME], hold[+ off, and press is unit the While theReset unit asfollows: (> “Yes”Select menu. inthe Setup Settings” Default in“Restore duringsearch. disturbance Image Regular discrotating sounds. again after changingthe batteries for control. ( remote to It set may codeofbe necessary the the control remote for time more than 5 seconds. [POWER and CLOSE] Even so,Even youstill havetrouble, your consult dealer. (> thatwith irregularities certain are discovered movies. operating correct to released be may updates Firmware firmware installed? thelatest have Do you Rico)” ( (United States Directory Services “Customer and Puerto Other supportinformation: website. You cent service a find can center. service a find to website Visit our so,Even youstill havetrouble, http://www.panasonic.ca For Canada number. model the Enter http://www2.panasonic.com/consumer-electronics/support/ For USA websitemore for information. Make thefollowing checksandvisit our (> thatwith irregularities certain are discovered movies. operating correct to released be may updates Firmware firmware installed? thelatest have Do you AAA”( CANADA)” Cannot eject disc. or front panel buttons. notrespondUnit does tothe remote control General operation 38) 21) 21) >
< : 50) or 50) “Limited Warranty for (Only > OPEN/CLOSE] on the unit at the same time for for time onthe at same unit the OPEN/CLOSE] : 51). Í Í /I] /I] on the main unit at the same /I] on the main unit for 5 seconds. seconds. 5 for unit main on the /I] er near you easily on er nearyoueasily our on 4 4 9 > 22) ] on the remote remote on the ] < OPEN/ > 22) When Dolby DigitalDolby TrueHD, Dolby audio jWhen Plus, andDTS-HD ≥ occurs. Jittering Picture is distorted. do not appear thisunit on the from The images TV. ≥ source, press and hold[SKIP press source, a as selected is and “BD/DVD” empty is tray disc the While You want to ratings cancel the level. You password. have your ratings forgotten ≥ ≥ on. switched is TV the when displayed not is mode tuner TV The ≥ normally. playback not do (JPEG) pictures Still ≥ played. be cannot Disc ≥ The display is dim. ≥ changed. is TV the for input the when off turned is unit this of Power ≥ The unitswitches to standby mode. ≥ ≥ ≥ power.No ratings toThe thelevel returns seconds. factory preset. [1 Settings” and make proper ( andmakeproper settings. Settings” bitstream, in “Yes” select output not are Default in “Restore using “Off Timer” in the Setup menu. ( menu. Timer” “OffSetup using inthe feat saving power is a This packaging) the on printed units PX with (For setting. the cancel to seconds 5 than more for time same the at unit source, press andhold[ press source, a as selected is and “BD/DVD” empty is disc tray the While theReset setting asfollows: Resolution”. in “HDMI is selected incorrect resolution An [POWER ofOne the unit’s is safety Press devices activated. terminal or by changing the HDMI auto connection setting. connection auto HDMI the changing or by terminal input HDMI a differentto cable HDMI the reconnecting by ontheDepending TV, this maybeprevented phenomenon Start”“On”. “Quick to set when is setting, occur, TV the may depending on phenomenon This JPEG, not playback. etc., may asProgressive such PC, onthe that wereedited images The disc isThe dirty. ( Change “FL Display” in the Setup menu. ( menu. Setup in the Display” “FL Change instructionsoperating the for TV. (HDAVI Control 4or detailslater). For pleaseread the Link VIERA using when phenomenon is anormal This ( is inactive. it if minutes after 30 standby mode to turn automaticallywillunit This Canada) and U.S.A. the (For will be turned off.turned ( will be the When time for set the haspassed,sleep timer the power AC outlet. ( outlet. AC ACpowersupplycordsecurely into Insert the a household (Play) ] (Play) on the unit at time than for the 5 more same Power TV screen andvideo Displays /I] on the main unit to turn the unit on. unitthe turn to main unit on the Í/I] > 18) > > 9) 6) ] (Play) and [ (Play) 1] > ure. It ure. be changedifcan desired 7) : ] on the remote control onthe control ] remote and > > ] (Stop)∫] main onthe 38) 38) > 37) VQT2M13 41 Optional speaker Reference settings SC-BT230_330_730P_PC_VQT2M13_eng.book 42 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Video is not output. ≥ If the TV is not ARC compatible and only the HDMI ≥ Set the “High Clarity Sound” in the playback menu to “Off” to connection is used, an extra audio connection is necessary use the VIDEO OUT terminal. (> 35) (> 14, 15).
Video is not output in high definition. iPod/iPhone operation ≥ Confirm that “HDMI Resolution” in the Setup menu are set properly. (> 37) Cannot charge or operate. ≥ Check that the iPod/iPhone is connected firmly. (> 32) No subtitles. ≥ The battery of the iPod/iPhone is depleted. Charge the iPod/ ≥ When progressive output is on, closed captions cannot be iPhone, and then operate again. displayed. Cannot display iPod/iPhone videos/photos on the TV. The subtitles overlap closed captions recorded on discs. ≥ Make sure that TV is connected to the VIDEO OUT terminal ≥ Turn off the subtitles or turn off the closed caption setting on on this unit. (> 14) the TV. (> 34) ≥ Operate the iPod/iPhone menu to make the appropriate video/photo output settings for your TV. (Refer to operating A black band is displayed around the edge of the screen. instructions for your iPod/iPhone.) The aspect ratio of the screen is abnormal. The TV input channel unintentionally changes to HDMI ≥ Confirm the “TV Aspect” is set properly. (> 37) input. ≥ Adjust the aspect setting on the television. ≥ When the main unit is connected with an “HDAVI Control” (Adjustment using “Screen Aspect” (> 26) on the unit is also compatible TV and VIDEO IN is selected for iPod/iPhone possible.) video or photo playback, the TV input channel will automatically change to the HDMI input channel when Sound [START] is pressed. jRe-select the TV’s VIDEO IN input channel. No sound. Low volume. Distorted sound. Radio Cannot hear the desired audio type. ≥ Check connections to speakers and other equipment. (> 10, Distorted sound or noise is heard. 11,13s18) ≥ Adjust the position of the antenna. ≥ Ensure the speaker settings for your speakers are correct. Use an outdoor antenna. (> 16) (> 39) ≥ ≥ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (> 37) A beat sound is heard. Try to keep a certain amount of distance between the ≥When “BD-Video Secondary Audio” is set to “On”, Dolby ≥ TrueHD, Dolby Digital Plus, DTS-HD Master Audio and antenna and the TV. DTS-HD High Resolution Audio are output as Dolby Digital or DTS Digital Surround. ≥ Re-master will not work when the bitstream signal is output [BT730] Wireless system from the HDMI AV OUT terminal. (> 35) ≥ Depending on the connected equipment, the sound may be (SH-FX71) distorted if this unit is connected with an HDMI cable. ≥ The multi-channel audio from a device connected to the TV No power. is not output in it’s original multi-channel form. ≥ Ensure the AC power supply cord of the wireless system is jIf the device has an optical audio output terminal, connect connected properly. the device to this unit’s “OPTICAL 2” terminal. (> 15, 30) The wireless link indicator (e.g., “ [W] ”) is flashing. No surround sound. ≥ There is no link between the main unit and the wireless ≥ Press [SURROUND] to select a surround effect. (> 24) system. Turn the wireless system off and then back on. ≥ [BT730] Ensure that the surround selector switch is set in the Alternatively, turn the wireless system off, disconnect the AC center position. Then, turn the wireless system off and then power supply cord and then reconnect it. back on. ≥ [BT730] [BT330] [BT230] (When using the 7.1ch speaker The wireless link indicator (e.g., “ [W] ”) does not light. system) ≥ Check that the main unit is turned on, and the wireless Audio is not available from the surround back speakers even system is turned on. though Dolby Pro Logic II turns on. ≥ Ensure that the digital transmitter is fully inserted into the slot of the main unit. (> 16) Cannot switch audio. ≥ When audio is output from the HDMI AV OUT terminal, set The wireless link indicator keeps flashing between red and “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to green. “PCM”. (> 36) ≥ There is a power supply problem. Consult the dealer.
No sound from the TV. ≥ Press [EXT-IN] to select the corresponding source. (> 23) ≥ The ARC (Audio Return Channel) function is not available. VQT2M13 Instead, use an optical digital audio cable or an audio cable 42 to have the TV sound. (> 14, 15) ≥ VideoNo ≥ addressisIP not set. ≥ $ ≥ inserted. is disc No ≥ Cannot display onthis unit. ≥ Cannot play. during startup and use. detected is unusual something unit’s when or display television the on appear numbers service or messages following The Messages ≥ be cannot Angle changed. ≥ ≥ Alternative soundtrack and su ≥ BD-Live. back play cannot I ≥ network. the to connect can’t I ≥ ≥ ≥ ≥ ≥ played. not is DVD-Video BD-Video or ≥ ≥ SC-BT230_330_730P_PC_VQT2M13_eng.book 43 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 43 SC-BT230_330_730P_PC_VQT2M13_eng.book (> iPod/iPhone menu. from your playback video operate and be not available onthe TV. “ALL”onthe Select unit’s display ontheDepending connected videomenumay iPod/iPhone, necessary.) if acquisition address automatic the (Select Gateway”. and“Default “Subnet Mask”, Set ---”. Address”, the ---. “IP ---. “---. is Settings” DNS / Address “IP in Address” “IP The j example; For unit. the by unsupported are operations Some discThe beupsidemay down. Youimage. non-compatible a play to tried etc.) video, PAL in Yourecorded (Discs disc. an incompatible inserted angles arerecorded. different where during scenes changed be only can Angles to( make changes. menus disc’s the Use discs. some on and subtitles soundtrack the change to menu You playback the use able to be not may disc. on the recorded not are languages The SDcardis ( The write-protected. and the connection Confirm network ( settings. Confirm the “BD-Live Internet Access” settings. settings. (> Internet Access” the “BD-Live Confirm (> Internet. the to broadband unitthat this isconnected Confirm Confirm an SD Card anSD is into SDCardslot.inserted ( Confirm the play.( setting. this Change Youor DVD-Video BD-Video limit level to ratings a set have DVD-Video region number, and is not defective. ( the discisforEnsure theBD-Video correct region code or accordingly.connect the eachdeviceand operatingCheck instructions for Some BD-Video can only be output with HDMI. with be output only BD-Video can Some This operation is operation not available.This reverse frame-by-frame is possible. not frame-by-frame reverse or slow-motion BD-Video: reverse During playback, Other difficulties with playback Network On the television the On 33) 17) > > 36) 25) btitlesselected. cannot be > 9) > > 7 38) 17, 36) 8) > 22) ≥ PLAYNo ≥ NET ≥ HDMI ONLY ≥ U73 U72 ≥ U59 2 1 ≥ ≥ ≥ (“ H ≥ (“ SET ≥ PLEASE WAIT ≥ READNo ≥ F99 or F or (> is There ona viewing restriction a BD-Video or DVD-Video. is while starting CAST VIERA Displays up. BD-Video canonlySome discs be output with HDMI. j j unusually. acts connection HDMI The unit. the unit. the Donot ventilationblock holeonthe rear and side of Select aposition with good ventilation wheninstalling the about untilminutes the30 disappears. message unit to switches The standby forWait safety reasons. for unitThe is hot. the service number when requesting service. requesting when number service the service the request from above, dealer. Inform the dealer of If the numberdoesnot service doingdisappear despite the doesnot disappear,number do following.the the unitCheck using troubleshootingthe guide. If the service unusual. is something There connections. cable speaker the and correct Check ( control. remote the on code the Change different codes. using unit are main and control remote The WAIT”displayed. is Youmalfunction. while“PLEASE unit the operate cannot unitThe is out anis carrying internal not process.This a play. cannot unit The scratched. or badly is dirty media The press [POWER press Now seconds. 3 for standbyto unit the switch to unit main unit to properly.The fails operate [POWER Press on. TV. and the player the between cable HDMI the Disconnect off. TV Turnunit and the Press [POWER then it. seconds, reconnect few plugthe Disconnect the from ACoutlet, household wait a On the unit’s display ” stands for a number.) ” stands for a number.) 36) Í Í /I] on the unit main again to theturn unit /I] to turn the power on. power the turn to /I] > 22) /I] on the Í/I] onthe VQT2M13 43
Reference SC-BT230_330_730P_PC_VQT2M13_eng.book 44 ページ ２０１０年３月１６日 火曜日 午後５時５７分
UPD/ IPOD OVER CURRENT ERROR (“ ” stands for a number.) ≥ The iPod/iPhone is drawing too much power. Remove the ≥ The firmware is being updated. Please do not turn off power. iPod/iPhone, and turn the unit off and on again.
[BT730] “[W]” is flashing. START ≥ There is no link between this unit and the wireless system. ≥ The system is being restarted during the firmware update. Check that the wireless system is plugged into the Please do not turn off power. household AC outlet and is turned on. ≥ Ensure that the digital transmitter is fully inserted into the slot FINISH of this unit. ≥ The firmware update is completed. ≥ If the wireless system is not used, disconnect the digital transmitter from this unit. NOT CONDITIONAL ≥ The requested operation cannot be conducted.
About MP3/JPEG/AVCHD/MPEG2 files MP3 AVCHD
File format MP3 File format AVCHD format (V1.0) used on High Extension Files must have the extension “.mp3” or Definition Video Camera “.MP3”. (Panasonic and some other’s) Compression 32 kbps to 320 kbps Codec MPEG-4 AVC/H.264 rate ≥ Discs must conform to UDF 2.5. Sampling rate 44.1 kHz/48 kHz Reference ID3 tags: version 1, 2.2, 2.3, 2.4 MPEG2 (Only titles and the names of artists)
File format SD-Video format* used on Standard JPEG Definition Video Camera (Panasonic and some other’s) File format JPEG Codec MPEG2 Extension Files must have the extension “.jpg” or * SD-Video Entertainment Video Profile “.JPG”. Picture between 34k34 and 8192k8192 pixels resolution (sub sampling is 4:2:2 or 4:2:0) ≥ With certain recording states and folder structures, the play order may differ or playback may not be possible. Reference JPEG conforming DCF* is supported. ≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet ≥ MOTION JPEG and Progressive JPEG is This unit is compatible with multi-session. This unit is not compatible with packet writing. not supported ≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660) This unit is not compatible with multi-session. * Design rule for Camera File system: unified standard This unit is not compatible with packet writing. established by Japan Electronics and Information Technology Industries Association (JEITA). Structure of folders that can be ≥ DVD-RAM must conform to UDF 2.0. ≥ BD-RE must conform to UDF 2.5. played in this unit
You can play files on this unit by structure of folders as shown below. However depending on the method of writing data (writing software), play may not be in the order you numbered the folders. Folder which can be displayed with this unit ¢¢¢: Numbers XXX: Letters *1 ¢¢¢: from 001 to 999 *2 ¢¢¢: from 100 to 999 XXXXX: 5 figures *3 ¢¢¢¢: from 0001 to 9999 XXXX: 4 figures
VQT2M13 44 *6 The total combined maximum number of recognizablepicturecontents Thetotalcombinedmaximum number *6 of recognizablepicturecontents Thetotalcombinedmaximum number *5 of recognizablepicturecontents Thetotalcombinedmaximum number *4 want towant playthem. order you inthe 3-digit with file numbers the names Prefix DL/CD-R/CD-RW DVD-R/DVD-R in ≥ Displays JPEG files in all folders. ≥ BD-RE in ortaken.updated inside Files a folder aredisplayedin the were they order in SD card SD in in DVD-R in SC-BT230_330_730P_PC_VQT2M13_eng.book 45 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 45 SC-BT230_330_730P_PC_VQT2M13_eng.book Root Root Root Root Folder structure is Folder structure not displayed. is Folder structure not displayed. and folders: 9999picture contentsand300folders. and folders: 999picture contentsand99folders. and folders: 3000picture contentsand300folders. and folders: P0000002 P0000001 001 P0000002 P0000001 001 002 P0000001 P0000002 Structures of still picture (JPEG) folders folders of Structures picture still (JPEG) Folder A Folder DCIM Folder A 004 003 012 011 010 005 JPEG DCIM Folder C Folder Folder A Folder XXXX XXXX Folder C * * P0000004 P0000003 P0000004 P0000003 6 4 P0000012 P0000011 P0000010 P0000005 * XXXX XXXX XXXX XXXX XXXX XXXX /DVD-RAM /DVD-R DL 4 .jpg .jpg .jpg .jpg 009 008 007 006 .mp3 .mp3 Folder B Folder DCIM Folder B Folder .jpg .jpg P0000009 P0000008 P0000007 P0000006 XXXX Structure of of folders Structure MP3 .mp3 .mp3 .mp3 .mp3 .mp3 .mp3 XXXX XXXX XXXX XXXX XXXX XXXX .jpg .jpg .jpg .jpg .jpg .jpg .jpg .jpg XXXXX XXXXX .mp3 .mp3 .mp3 .mp3 XXXXX *1 * * .jpg .jpg .jpg .jpg 4 4 *2 /CD-R* .jpg *2 e.g., .jpg .jpg e.g., e.g., *2 *3 *3 e.g., *3 5 /CD-RW * 5 ∫ ∫ ∫ ∫ information Supplemental Display Language h(hne)Numberofchannels ch (channel) bt Numberofbits b (bit) PM iia/Digital+/ DTS-HD MSTR/MPEG Digital/ LPCM/ bps (bitpersecond) 24p/50i/60i/50p/60p MPEG-2/MPEG-4 AVC/VC-1 bps (bitpersecond) k (kHz) YCbCr4:2:2/YCbCr4:4:4/RGB Color Space Color YCbCr4:2:2/YCbCr4:4:4/RGB 480/576/720/1080 urn:7178 6976 7576 Guarani: 6869 Greenlandic: 7565 Greek: 7176 7089 German: 7082 Georgian: 7073 Galician: Frisian: French: 7079 Finnish: 6984 Fiji: 6978 6979 Faroese: 7876 Estonian: 6865 Esperanto: 6783 English: Dutch: 7282 Danish: 6779 Czech: 9072 6765 Croatian: Corsican: Chinese: Catalan: lain 8381 6565 6570 Amharic Albanian: Afrikaans: Afar: 6566 Abkhazian abda:7577 7789 6669 Cambodian: 6682 6671 Byelorussian: 6672 Burmese: 6890 Bulgarian: Breton: Bihari: 6985 Bhutani: 6665 Bengali; Bangla: 6589 Basque: 6590 Bashkir: 6583 Azerbaijani: 6582 7289 Aymara: Assamese: Armenian: Arabic: RUS POR DAN NOR SVE NLD ESP ITA DEU FRA ENG Language code list Audio attribute Video attribute languageslist Display TrueHD/DTS/DTS 96/DTS-HDHIRES/ : Language Russian Portuguese Danish Norwegian Swedish Dutch Spanish Italian German French English Display Code 6577 Display 7074 6678 Display Language ucu:8185 8065 8076 Quechua: 8084 7065 Punjabi: Portuguese: 7982 Polish: Persian: 7869 8083 Pashto, 7879 Pushto: 7865 Oriya: Norwegian: 7778 Nepali: 7782 7779 Nauru: 7773 Mongolian: 7784 Moldavian: Marathi: 7783 Maori: 7776 Maltese: 7771 Malayalam: Malay: 7775 7678 7684 Malagasy: Macedonian: Lithuanian: Lingala: ai:7665 7679 7686 7585 Latvian, Lettish: 7579 Latin: 7589 Laotian: 7575 Kurdish: Korean: 7583 Kirghiz: 7578 Kazakh: 7487 Kashmiri: 7384 7465 Kannada: Javanese: Japanese: 7365 Italian: Irish: 7378 7383 7273 Interlingua: 7285 Indonesian: 7387 Icelandic: 7265 Hungarian: Hindi: 7185 Hebrew: Hausa: Gujarati: FIN HUN SLK CES POL THA VIE MAL KOR CHI JPN Language Finnish Hungarian Slovak Czech Polish Thai Vietnamese Malay Korean Chinese Japanese Transfer rateofbit Video Framerate Video recordingmethod Video Format Code 7165 Signal type Transfer rateofbit Sampling frequency Display Language TUR GRE RUM BUL MRI IND PER HIN ARA oua 8979 7473 8872 Zulu: 8779 Yoruba: 6789 Yiddish: Xhosa: 8679 Wolof: 8590 8582 Welsh: 8673 Volapük: Vietnamese: 8575 Uzbek: Urdu: 8475 8482 Ukrainian: 8479 Twi: Turkmen: 8473 6679 Turkish: Tonga: 8469 8484 Tigrinya: Tibetan: 8465 Thai: Telugu: Tatar: Tamil: aao:8476 8386 8387 Tajik: Tagalog: Swedish: 6983 8385 8379 Swahili: Sundanese: 8375 8376 Spanish: Somali: 8368 Slovenian: 8373 8378 Slovak: Singhalese: 8382 Sindhi: Shona: 8372 Serbo-Croatian: 8365 7168 Serbian: 8377 Gaelic: Scots 8285 Sanskrit: 8279 Samoan: Russian: Romanian: Rhaeto-Romance: Meaning Meaning Language Others Turkish Greek Romanian Bulgarian Maori Indonesian Persian Hindi Arabic Code 9085 8472 8487 8471 8277 VQT2M13 45
Reference SC-BT230_330_730P_PC_VQT2M13_eng.book 46 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Java and all Java-based trademarks and logos are trademarks or This product incorporates the following software: registered trademarks of Sun Microsystems, Inc. in the United States and other countries. (1) the software developed independently by or for Panasonic Corporation, Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. (2) the software owned by third party and licensed to Panasonic Corporation, Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; (3) the software licensed under the GNU General Public 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & License, Version 2 (GPL v2), pending. (4) the software licensed under the GNU LESSER General DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Public License, Version 2.1 (LGPL v2.1) and/or, Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. (5) open sourced software other than the software licensed © DTS, Inc. All Rights Reserved. under the GPL v2 and/or LGPL v2.1 This product incorporates copyright protection technology that is protected For the software categorized as (3) and (4), please refer to by U.S. patents and other intellectual property rights. Use of this copyright the terms and conditions of GPL v2 and LGPL v2.1, as the protection technology must be authorized by Macrovision, and is intended case may be at for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United In addition, the software categorized as (3) and (4) are States and other countries. copyrighted by several individuals. Please refer to the copyright notice of those individuals at This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a http://www.am-linux.jp/dl/JPRCBW98 consumer to (i) encode video in compliance with the AVC Standard and The GPL/LGPL software is distributed in the hope that it will VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and be useful, but WITHOUT ANY WARRANTY, without even the non-commercial activity and/or was obtained from a video provider implied warranty of MERCHANTABILITY or FITNESS FOR A licensed to provide AVC/VC-1 Video. No license is granted or shall be PARTICULAR PURPOSE. implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact HDAVI ControlTM is a trademark of Panasonic Corporation. information provided below, for a charge no more than our x.v.ColorTM is a trademark. cost of physically performing source code distribution, a VIERA LinkTM is a trademark of Panasonic Corporation. complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL v2.1. VIERA CASTTM is a trademark of Panasonic Corporation. Contact Information EZ Sync™ is a trademark of Panasonic Corporation. [email protected] “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation Source code is also freely available to you and any other and Sony Corporation. member of the public via our website below. SDXC Logo is a trademark of SD-3C, LLC. http://www.am-linux.jp/dl/JPRCBW98 “Blu-ray Disc” is a trademark.
“BD-LIVE” logo is a trademark of Blu-ray Disc Association.
“BONUSVIEW” is a trademark of Blu-ray Disc Association.
YouTube and Picasa are trademarks of Google, Inc.
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. -If you see this symbol- “Works with iPhone” means that an electronic accessory has been designed to Information on Disposal in other Countries outside the connect specifically to iPhone and has been certified by the developer to meet Apple European Union performance standards. This symbol is only valid in the European Apple is not responsible for the operation of this device or its compliance with safety and Union. regulatory standards. If you wish to discard this product, please iPod is a trademark of Apple Inc., registered contact your local authorities or dealer and in the U.S. and other countries. iPhone is a trademark of Apple Inc. ask for the correct method of disposal.
The model number and serial number of this product can be User memo: found on either the back or the bottom of the unit. DATE OF PURCHASE ______Please note them in the space provided below and keep for DEALER NAME ______future reference. DEALER ADDRESS ______MODEL NUMBER ______TELEPHONE NUMBER ______SERIAL NUMBER ______VQT2M13 46 7.1 channel output. channel 7.1 to up supports BD-Video kHz. kHz/48 96 frequency sampling with is compatible It formats. 96/24 DTS and DTS-ES DTS, is This a signal achiev format DTS-HD High Resolution Audio BD-Video supports up to channel 7.1 output. canplay as equipment DigitalDTS-HD DTS audio. Surround Digital Surround-compatible DTS Previous theatrers. movie is ahigh-quality,DTS-HD audio usedinsophisticated format DTS-HD effects arepossible. good separation between the sorealisticchannels, sound is There theaters. many movie in isused system surround This (DigitalDTS Systems) Theater channels. fewer into discs some on found audio multi-channel the remixing of process is the This Down-mixing output. channel 7.1 audio. the BD-Videostudio reproduces supports master up to that format audio high quality TrueHD a very Dolby is TrueHDDolby channel. on 5.1 sources stereo play to enables you II Logic Pro Dolby Dolby Pro Logic II output. using DolbyDigital BD-VideoPlus. supports up to channel 7.1 audio Multi-channel and higheraudio quality is made possible Dolby Digital Plus signals canalsobe audio. multi-channel these audio, (2-channel) stereo Apart from Laboratories. is This a method coding of digital signalsdevelopedbyDolby Dolby Digital TV.]connected the suit to output appropriate set willautomatically unit Color. Deep support not does The which TV a to connected Color,ifwithout Deep steps), reproduced (256 be will gradation color lower [A banding. color minimal and gradation detailed natural-looking smooth, rich, exceptionally with colors, supports the Color withDeep cable. HDMI You canenjoy that TV a to connected steps) when (4096 gradation color Deep Coloris a namefor a devic Color Deep channels. its into various decoded it is before channel) is This the digital form of audio multi-channel data 5.1(e.g., Bitstream features in addition to playing normal video. You calledBD-J. are applications BD-Video Some discs contain Java applications, andthese BD-J HD images. high-resolution and play record to be used can that cameras AVCHDhigh definition video (standard) for format a new is AVCHD Glossary SC-BT230_330_730P_PC_VQT2M13_eng.book 47 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 47 SC-BT230_330_730P_PC_VQT2M13_eng.book ed by improving ed byimproving the previous e that can reproduce greater canreproduce e that can enjoy variousinteractive can materials. are recorded in 24 frames/second contents movie BD-Video Many film). (motion-picture second imagerecor isaprogressive This 24p x.v.Color picture realistic towhen connected a thatTV supports the You enjoy vividcolorsofcan widercolorrangesfor a more transmission. signal for rules the that follow and pictures, motion aninternational format, xvYCC standard for expanded color in x.v.Color x.v.Color toresolution the TV. connected Consequently, this unit is to able provide video of optimal signal. Definition video High a 1080 to signal 576i) video or (480i resolution standard of high-level conversion a and progressive to interlace from including a ofhigh-level the conversion TV format scanning algorithm. VariousPanasonic is which This a processor HD) for Processing Progressive Precision (Pixel P4HD audio, enabling youto enjoy digital audio with no hassle. digitalaudio into analog converting for format is one This PCM(Pulse Code Modulation) on CDs. found those digitalsimilar to signals, are uncompressed These area These format. kind of PCM PCM) (Linear LPCM playing BD-Live on BD-Video. for contents sub for a destination as used is area storage This storage Local digital videoand audio signalson a single cable. Unlike conventional connections, isa HDMI digital interface fo Interface) Multimedia (High-Definition HDMI dialog clearly. hear still but volumes low Th and softestsounds. loudest the the gap reducing means rangecompression between Dynamic occurs. distortion before sound of level highest the of and equipment the noise above the beheard that can sound rangeis differenceDynamic the the between lowest oflevel Dynamic range channel output. 7.1 up to supportsBD-Video technology.audio encoding lossless enabled using is audio the In of ch reproduction master orless. addition, faithful 96 kHz/7.1 withand compatible audioformat lossless is a This Audio Master DTS-HD TM TM TM with HDMI cable. HDMI with is anamefor devices that are compatible with the makes use of an exclusive exclusive an of use makes r consumer electronic products. electronic consumer r processing is supported, supported, is processing ded at per ded at ofa rate 24frames it transmits uncompressed it transmits uncompressed in accordance with the film film the with in accordance is meansyoucanlisten at VQT2M13 47
Reference SC-BT230_330_730P_PC_VQT2M13_eng.book 48 ページ ２０１０年３月１７日 水曜日 午後１時５５分
Specifications Audio Input GENERAL AUX: k 1 Digital Audio Input Power consumption: Optical: k 2 (For the U.S.A. and Canada): 90 W Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz Audio Format: PCM, Dolby Digital (For units with PX printed on the packaging): 100 W Power consumption in standby mode: (For the U.S.A. and Canada): FM TUNER SECTION [BT730] [BT330]: Approx. 0.05 W Preset memory: 30 stations [BT230] [BT235]: Approx. 0.1 W Frequency range: 87.9 MHz to 107.9 MHz (200 kHz step), (For units with PX printed on the packaging): 87.5 MHz to 108.0 MHz (100 kHz step) [BT730]: Approx. 0.1 W Antenna terminals: 75 ≠ (unbalanced) [BT230]: Approx. 0.2 W Power supply: SPEAKER SECTION (For the U.S.A. and Canada): AC 120 V, 60 Hz FRONT SPEAKERS (For units with PX printed on the packaging): [BT730] SB-HF730 AC 110 V to 127 V, 220 V to 240 V, Type: 2 WAY 3 SPEAKER Bass-ref. 50 Hz/60 Hz Woofer: 3.5 cm k 10 cm (13/8qk4q) CONE TYPEk 2 iPod/iPhone Connector: DC OUT 5 V 500 mA MAX Tweeter: 2.5 cm (1q) SEMI-DOME TYPE [BT730] [BT330] [BT230] Impedance: 3 ≠ WIRELESS LAN Connector: DC OUT 5 V 500 mA Output sound pressure: 78 dB/W (1 m) Dimensions (WkHkD) 430 mmk54 mmk287 mm Frequency range: 100 Hz to 30 kHz (j16 dB), 15 1 5 (16 /16qk2 /8qk11 /16q) 130 Hz to 25 kHz (j10 dB) [BT730] (with transmitter): 430 mmk54 mmk298 mm Dimensions (WkHkD): 255 mmk1024 mmk255 mm 15 1 23 (16 /16qk2 /8qk11 /32q) (101/16qk4011/32qk101/16q) Mass (Weight): Mass (Weight): Approx. 2.3 kg (5.07 lbs) (For the U.S.A. and Canada): Approx. 3.2 kg (7.1 lbs) (For units with PX printed on the packaging): [BT330] [BT235] SB-HF330 Approx. 3.1 kg Type: 1 WAY 1 SPEAKER Bass-ref. 1 (Dimensions and Weight do not Full range: 6.5 cm (2 /2q) CONE TYPE include speakers) Impedance: 3 ≠ Operating temperature Output sound pressure: 78 dB/W (1 m) range: 0 oC to 40 oC Frequency range: 85 Hz to 25 kHz (j16 dB), (32 oF to 104 oF) 95 Hz to 22 kHz (j10 dB) Operating humidity range: 35 % to 80 % RH Dimensions (WkHkD): 100 mmk530 mmk78 mm 15 7 1 (no condensation) (3 /16qk20 /8qk3 /16q) Mass (Weight): Approx. 0.92 kg (2.03 lbs)
AMPLIFIER SECTION Full assembly with stand base Dimensions (WkHkD) [BT730] max: 255 mmk1020 mmk255 mm 1 5 1 RMS TTL POWER OUTPUT: 1000 W (10 /32qk40 /32qk10 /32q) (with WIRELESS SYSTEM) Dimensions (WkHkD) 1 kHz, 10 % total harmonic distortion min: 255 mmk550 mmk255 mm 1 21 1 FRONT: 125 W per ch (3 ≠) (10 /32qk21 /32qk10 /32q) CENTER: 250 W per ch (6 ≠) Mass (Weight): Approx. 2.3 kg (5.1 lbs) SURROUND: 125 W per ch (3 ≠) (with WIRELESS SYSTEM) [BT230] SB-HF230 100 Hz, 10 % total harmonic distortion Type: 1 WAY 1 SPEAKER Bass-ref. SUBWOOFER: 250 W per ch (6 ≠) Full range: 6.5 cm (21/2q) CONE TYPE Impedance: 3 ≠ FTC TTL POWER OUTPUT: 446 W Output sound pressure: 78 dB/W (1 m) (with WIRELESS SYSTEM) Frequency range: 105 Hz to 25 kHz (j16 dB), 200 Hz to 20 kHz, 1.0 % total harmonic distortion 130 Hz to 22 kHz (j10 dB) FRONT: 86 W per ch (3 ≠) Dimensions (WkHkD): 80 mmk118.5 mmk68 mm CENTER: 106 W per ch (6 ≠) (35/32qk411/16qk211/16q) SURROUND: 34 W per ch (3 ≠) Mass (Weight): Approx. 0.4 kg (0.88 lbs) (with WIRELESS SYSTEM) 45 Hz to 200 Hz, 1.0 % total harmonic distortion SUBWOOFER: 100 W per ch (6 ≠)
[BT330] [BT230] [BT235] RMS TTL POWER OUTPUT: 1000 W 1 kHz, 10 % total harmonic distortion FRONT: 125 W per ch (3 ≠) CENTER: 250 W per ch (6 ≠) SURROUND: 125 W per ch (3 ≠) 100 Hz, 10 % total harmonic distortion SUBWOOFER: 250 W per ch (6 ≠) FTC TTL POWER OUTPUT: 446 W 120 Hz to 20 kHz, 1.0 % total harmonic distortion FRONT: 60 W per ch (3 ≠) CENTER: 106 W per ch (6 ≠) VQT2M13 SURROUND: 60 W per ch (3 ≠) 45 Hz to 120 Hz, 1.0 % total harmonic distortion 48 SUBWOOFER: 100 W per ch (6 ≠) [BT730] SD card slot: [BT730] SPEAKERCENTER SUBWOOFER SURROUND SPEAKERS SURROUND Ethernet: SC-BT230_330_730P_PC_VQT2M13_eng.book 49 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 49 SC-BT230_330_730P_PC_VQT2M13_eng.book [BT230] [BT330] Terminal: Woofer: Type: SB-HC730 [BT730] Dimensions (W Dimensions range: Frequency Output sound pressure: (W Dimensions range: Frequency Output sound pressure: Impedance: Impedance: radiator: Passive [BT730] (Weight): Mass Dimensions (W Dimensions range: Frequency Output sound pressure: Impedance: range: Frequency Output sound pressure: Impedance: Mass (Weight): Mass Tweeter: [BT730] (Weight): Mass Full range: Full Type: Mass (Weight): Mass [BT230] Mass (Weight): Mass Sensitivity: Woofer: Type: Dimensions (W Dimensions Dimensions (W Dimensions range: Frequency Output sound pressure: Impedance: Full range: Full Type: Woofer: Type:
TERMINAL SECTION TERMINAL [BT330] [BT330] [BT330] [BT330] [BT235]
Calibration Mic Calibration [BT230]
[BT235] SB-HW330 [BT230] SB-HW480 k k k k k H H H H H USB: k k k k k D): D): D): D): D):
[BT235] SB-HC230
SB-HS230 Mono, 3.5 mm ( mm 3.5 Mono, onco system :1 Connector 0AET10AET system 1 10BASE-T/100BASE-TX 0 V . k mV, 4.7 100 only) Adaptor LAN Wireless for (Use 2.0 USB . cm 3.5 SPEAKER Bass-ref. WAY 3 2 (5 (7 4 mm 145 Hz ( Hzto 180 45 Hz ( Hzto 220 40 m) dB/W (1 78 mm 180.5 Hz ( Hzto 160 40 Hz ( Hzto 180 35 m) dB/W (1 78 6 6 (10 cm 25 prx . k 0.4 Approx. (3 0mm 80 kHz( 22 to Hz 130 kHz( 25 to Hz 105 m) dB/W (1 78 3 kHz ( Hzto 25 90 m) dB/W (1 79 6 prx . k 2.8 Approx. . cm (1 2.5 TYPE prx . k 0.6 Approx. . cm (2 6.5 SPEAKER Bass-ref. WAY 1 1 prx .6k 1.06 Approx. prx . k 4.6 Approx. 6cm (6 16 SPEAKER (Kelton type) WAY 1 1 4 mm 145 115 Hz to 22 kHz ( kHz to 22 Hz 115 2 mm 424 kHz( 25 to Hz 130 kHz( 30 to Hz 100 m) dB/W (1 78 6 . cm (2 6.5 SPEAKER Bass-ref. WAY 1 1 6cm (6 16 SPEAKER Bass- ref. WAY 1 1 (5 (16 ≠ ≠ ≠ ≠ ≠ 23 1 5 23 / / 23 8 32 / / 32 qk 32 / qk 32 qk11 qk3 k 12 k qk k 4 k k k 2 1 1 11 1. mm 118.5 11 1 1 q 2 / / 11 0cm (1 10 k q 8. mm 289.5 5mm 85 9mm 59 2 2 / / ) SEMI-DOME) TYPE / 13 / ) 2 2 11 16 q q / 16 q 32 q ) CONETYPE ) CONETYPE ) 2 mm 322 / / ) CONETYPE ) CONETYPE ) qk 32 qk 32 qk (.8lbs) g (0.88 (.7lbs) g (6.17 (.2lbs) g (1.32 (01lbs) g (10.1 ≠ qk qk3 (.4lbs) g (2.34 2 13 1 2 11 / 10 8 13 k k j j j j j / q 13 q 16 ) jack / j 3 k j j j j 15mm 71.5 6mm 76 ) 16 5 6dB), 16 / 0dB) 10 dB), 16 dB) 10 dB), 16 / q 8 / k k 16 0dB) 10 ) 8mm 68 0dB) 10 dB), 16 q 0dB) 10 dB), 16 32 qk ) q 5 mm 258 mm 351 q ) ) 4 q ) CONE
WIRELESS SYSTEM AND AND SYSTEM WIRELESS k H k D) mode: 34 W per per ch (3 W 34 3 GHz to 2.4835 2.4 per ch (3 W 70 8W 68 (3 ch per W 125 4 W 140 (3 ch per W 125 HDMI (Deep Color, (Deep HDMI x.v.Color pin) Type (19 A 1080p/1080i/720p/480p system) (1 jack Pin Vp-p (75 1.0 NTSC 5 W 250 5 W 250 with the safety protection thesafety with emitted is radiation hazardous No 0 (no condensation) RH % % to 80 20 (no condensation) RH % % to 80 35 k 0.695 Approx. k 0.66 Approx. mm 43.3 W 0.3 Approx. W 0.2 Approx. W 43 W 35 W 1.2 V, 50Hz/60 Hz 110AC V to 240 V, Hz 60 120 AC nm (BDs) (DVDs)/405 nm (CDs)/655 nm 790 5” function. 5” supports unit “HDAVIThis Control Audio) rate Bit High prx .1k 0.01 Approx. 6 mm 165 (1 (6 o 11 1 C to 40 C to / / 2 16 qk qk 3 5 1 k / k 15 8 15mm 91.5 qk o 73mm 37.3 / C (32 32 6 qk ≠ 15 (.6lbs) g (1.46 (.2lbs) g (0.02 ) ≠ ≠ 5 / g 32 / ≠ ≠ 16 ) ) o q F to104 q ) ) ) k ) k 6 mm 164 . mm 8.2 o F) TM , VQT2M13 49
Reference SC-BT230_330_730P_PC_VQT2M13_eng.book 50 ページ ２０１０年３月１６日 火曜日 午後５時５７分
LimitedGetting Started Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only) misuse, abuse, neglect, mishandling, misapplication, alteration, faulty If your product does not work properly because of a defect in materials installation, set-up adjustments, misadjustment of consumer controls, or workmanship, Panasonic Consumer Electronics Company (referred improper maintenance, power line surge, lightning damage, to as “the warrantor”) will, for the length of the period indicated on the modification, introduction of sand, humidity or liquids, commercial use chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or such as hotel, office, restaurant, or other business or rental use of the refurbished parts, (b) replace it with a new or a refurbished equivalent product, or service by anyone other than a Factory Service Center or value product, or (c) refund your purchase price. The decision to repair, other Authorized Servicer, or damage that is attributable to acts of God. replace or refund will be made by the warrantor. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED Product or Part Name Parts Labor UNDER “LIMITED WARRANTY COVERAGE”. Blu-ray Disc Player, Portable 1 year 90 days THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR Blu-ray Disc Player CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS Blu-ray Home Theater System 1 year 1 year WARRANTY. DVD Player, Portable DVD Player 1 year 90 days (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other DVD Recorder 1 year 90 days memory or recorded content. The items listed are not exclusive, but for Rechargeable Batteries (pack), 10 days Not illustration only.) DVD-RAM Disc (defective Applicable ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE exchange) WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. During the “Labor” warranty period there will be no charge for labor. Some states do not allow the exclusion or limitation of incidental or During the “Parts” warranty period, there will be no charge for parts. consequential damages, or limitations on how long an implied warranty This Limited Warranty excludes both parts and labor for lasts, so the exclusions may not apply to you. non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty gives you specific legal rights and you may also have This warranty only applies to products purchased and serviced in the other rights which vary from state to state. If a problem with this product United States or Puerto Rico. This warranty is extended only to the develops during or after the warranty period, you may contact your original purchaser of a new product which was not sold “as is”. dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor. Mail-In Service PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS For assistance in the U.S.A. and Puerto Rico in obtaining repairs, LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. please ship the product prepaid to: Panasonic Exchange Center Customer Services Directory (United States and Puerto 4900 George McVay Drive Rico) Suite B McAllen, TX 78503 Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase [email protected] Parts and Accessories; or make Customer Service and When shipping the unit, carefully pack, include all accessories, and Literature requests by visiting our Web Site at: send it prepaid, adequately insured and preferably in the original carton. http://www.panasonic.com/help If Lithium Ion batteries are shipped by air the package must be labeled or, contact us via the web at: http://www.panasonic.com/contactinfo “Contains Lithium Ion Battery (No lithium metal)”. Damaged batteries You may also contact us directly at: are prohibited from shipment by US Mail. Batteries must be securely 1-800-211-PANA (7262) packed in a manner to prevent short-circuiting and a package cannot Monday-Friday 9am-9pm, contain more than 3 Lithium Ion batteries. Include a letter detailing the Saturday-Sunday 10am-7pm EST complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under For hearing or speech impaired TTY users, TTY: the Limited Warranty. 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES Purchase Parts, Accessories and Instruction Books online for all RECEIPT/PROOF OF PURCHASE INDICATING DATE OF Panasonic Products by visiting our Web Site at: PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. http://www.pstc.panasonic.com CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT Or, send your request by E-mail to: RECEIVED WITHOUT SUCH PROOF OF PURCHASE. [email protected] You may also contact us directly at: Limited Warranty Limits And Exclusions 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) This warranty ONLY COVERS failures due to defects in materials or (Monday-Friday 9am-9pm EST) Panasonic Service and Technology Company workmanship, and DOES NOT COVER normal wear and tear or 20421 84th Avenue South, Kent, WA 98032 cosmetic damage. The warranty ALSO DOES NOT COVER damages (We accept Visa, MasterCard, Discover Card, American Express, which occurred in shipment, or failures which are caused by products and Personal Checks) not supplied by the warrantor, or failures which result from accidents, For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November 2009
VQT2M13 50 This warranty is warranty This to extended the original end commercially.used are Drycell al batteries altered or repaired in any way that affects the reliability or affectsreliabilitythe that way inany repaired or altered to subjected usagefor the which wasnot product designed, Our Customer Care Centre: Telephone #: (905) 624-5505 (905) REPAIRS, PRODUCT FOR Telephone #: Centre: Care Customer Our OPERATION PRODUCT FOR ASSISTANCE, C outside purchased products apply to not does warranty This LIMITATIONS EXCLUSIONS AND a such defect for period asstated below from the ofdate original purchase. this CanadaInc. warrants product be Panasonic to from free defec Limited Warranty ( WARRANTY SERVICE applicable. be not may exclusions limitations and above the so warranties, implied of exclusion excl allowthe not do jurisdictions instances, some certainIn DAMAGES. PANASONICEVENT WILL IN NO LIABLE INC.BE CANADA WARRANTIES IMPLIED ANY MERCHANTABILITYOF PARTICULAR A FOR AND FITNESS PURPOSE. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING isperformed. service warranty before required SC-BT230_330_730P_PC_VQT2M13_eng.book 51 ページ ２０１０年３月１６日 火曜日 午後５時５７分 ページ 51 SC-BT230_330_730P_PC_VQT2M13_eng.book Link : “Servicentres : Link Accessories including rechargeable batteries rechargeable including Accessories Panasonic Recorder/VCRCombination DVD Panasonic Player/VCRCombination DVD Panasonic ProductBD/DVD (1) One year, parts and labour Product Audio Panasonic Audio/SD Panasonic Portable/Clock Radio (withoutTape, CD, MD) Technics Audio Product Carefully pack Carefully and sendprepaid, insu adequately TM locator” under “Customer support” “Customer under locator” PANASONICWARRANTY PRODUCT—LIMITED Include Include details of the defect claimed, a please Authoriz yournearest locate -0 : 1-800-561-5505 link: Email #: Fax #: 1-800 IF YOU SHIP THE PRODUCT TO A SERVICENTRE so excluded from coverage under this warranty.this under coverage from excluded so user purchaser purchaser only.user or Apurchase receipt please contact: Only for Panasonic CanadaInc. “Customer support” on www.panasonic.ca on support” “Customer (905) 238-2360 (905) nordoesit whi the coveranyproduct detracts from performance, usion orlimitation of incidental or damages, or consequential th misused damagedduringshipping,misused or abused, or which has been anada or to any product which has which product any or to anada ANY FOR SPECIAL, INDIRECT OR CONSEQUENTIAL ed Servicentre www.panasonic.caat ed Servicentre nd ofproof date of original purchase. ts in material and workmanship and agrees to remedy any remedy to agrees and and workmanship material in ts CANADA) red and preferably in the original carton. original inthe and preferably red Ninety (90) days (90) Ninety One (1)One year, parts and labour (1)One year, parts and labour One (1)One year, parts and labour One (1)One year, parts and labour (1)One year, parts and labour other other ofproof date of original purcha been improperly beenimproperly installed, : ch is is ch e se is is se VQT2M13 51
Reference SC-BT230_330_730P_PC_VQT2M13_eng.book 52 ページ ２０１０年３月１６日 火曜日 午後５時５７分
Index
A H R AC Power Connection ...... 18 HDMI ...... 15, 47 Radio ...... 29 Angle ...... 34 High Clarity Sound ...... 35, 37 Random play ...... 35 Audio I Re-master...... 35 Attribute ...... 45 iPod/iPhone...... 32 Remote control Changing audio...... 25 IP address ...... 38 Remote control code ...... 22 Channel ...... 34 J Using the remote control ...... 9 Language ...... 36 JPEG ...... 27, 44 Repeat play ...... 35 AVCHD ...... 44, 47 L Restore Default Settings...... 38 B Resume play function ...... 25 BD-J ...... 47 LAN ...... 17 Language S BD-Live...... 26 SD card...... 9, 27 BD-Video Ratings ...... 36 Audio ...... 36 Code list...... 45 Search ...... 25 BONUSVIEW ...... 26 Menu ...... 36 Setup menu ...... 36 C On-screen ...... 37 Skip...... 25 Chapter...... 26 Soundtrack...... 34 Sleep timer ...... 6 Cleaning Subtitle ...... 34, 36 Slideshow...... 28 Disc...... 9 Local storage ...... 47 Slow-motion ...... 25 Lens ...... 9 LPCM ...... 47 Soundtrack...... 34 Main unit ...... 9 M Status Message ...... 25 Connection Menu Still pictures...... 27 Antenna ...... 16 Playback ...... 34 Subtitle ...... 34 AUX ...... 14 Pop-up ...... 25 Digital transmitter ...... 16 Setup ...... 36 Surround sound...... 24 DVD recorder ...... 15 MPEG2...... 44 V HDMI...... 15 TM MP3 ...... 44 VIERA CAST ...... 34 iPod/iPhone ...... 32 TM TM Muting ...... 6 VIERA Link "HDAVI Control " . . . . 31 OPTICAL IN ...... 14, 15 W Set Top Box ...... 15 N Whisper-mode Surround ...... 24 Speaker ...... 13 Network TV ...... 14 Connection...... 17 X TM Video cassette recorder ...... 15 Setting ...... 20, 38 x.v.Color ...... 47 Wireless system ...... 13 O D On-screen Deep Color ...... 47 Language ...... 37 24p ...... 35, 37, 47 Status Message ...... 25 Dialog Enhancer ...... 35 P Direct Navigator ...... 25 Picture-in-picture ...... 26 Disc and card handling...... 9 Playback Discs that cannot be played...... 8 AVCHD ...... 25 DNS Server ...... 38 JPEG ...... 27 Dolby Digital ...... 36, 47 MPEG2 ...... 25 Dolby Digital Plus ...... 36, 47 MP3 ...... 28 Dolby Pro Logic II ...... 24, 47 Playback Information Window ...... 35 Dolby TrueHD ...... 36, 47 Playlist...... 23 DTS...... 36, 47 Pop-up Menu...... 25 DTS-HD...... 36, 47 Product Disposal ...... 9 DVD-Video Ratings ...... 36 Progressive...... 35 F Proxy Server ...... 38 Finalize ...... 9 P4HD ...... 47 Firmware update ...... 21 Q Format ...... 27 Quick Start ...... 38 Frame-by-frame ...... 25
[For[the[U.S.A.[and[Puerto[Rico[ [For[Canada[ [For[units[with[PX[printed[on[the[packaging[ Panasonic Consumer Electronics Panasonic Canada Inc. Panasonic Corporation Company, Division of Panasonic 5770 Ambler Drive, Corporate Management Division Corporation of North America Mississauga, Ontario For North America L4W 2T3 One Panasonic Way, Secaucus, Sales Team www.panasonic.ca New Jersey 07094 1-61, Shiromi 2-Chome, Chuo-ku, http://www.panasonic.com Osaka City 540-6255, Japan Panasonic Corporation 2009 VQT2M13-6 Printed in Malaysia F1209BT6030