WARNING Note on DualDiscs 2-668-125-11(1 ) This equipment has been tested and found to comply A DualDisc is a two sided disc product which mates SON with the limits for a Class B digital device, pursuant DVD recorded material on one side with digital audio material on the other side. However, since the Notes on XM Satellite Radio to Part 15 of the FCC Rules. These limits are designed Select a track or file I_1_1/1_1_1(go back/go forward) To tune in a station with a weak signal to provide reasonable protection against harmful audio material side does not conform to the Compact • To eusure optimal reception ot' XM's satellite signal, move your If "TUNED" does not appear and the scatming does autenna to various wiudow h)cations arouud your home to see [_. Or turn the jog dial [_ on intetterence in a residential installation. This equipment Disc (CD) standard, playback on this product is not not stop, press TUNING MODE [_ repeatedly until Micro HI-FI where the best reception will be received. Most XM customers the unit and press PUSH ENTER genetates, uses, and can radiate radio frequency energy guaranteed. place the anteuna in a south-facing window with a clear view to the [_ on the unit. To cancel, press "AUTO" and "PRESET" disappear, and then press and, if not installed and used in accordance with the sky. CANCEL [_ on the unit. +1- on the remote (or TUN[NG +1- on the unit) [_ instructions, may cause harmful interference to tadio Music discs encoded with • Residents in Cauada please see information about XM Canada at repeatedly to tune in the desired station. ComponentSystem the li)llowing webpage: (http://www.xmradio.ca/) Find a point in a Hold down -,_1_1/1_1_(rewind/fast communications. However, there is no guarantee that copyright protection technologies interference will not occur in a particular installation. [f track or file forward) [_ during playback, To reduce static noise on a weak FM stereo This product is designed to playback discs that To set the clock this equipment does cause harmful interference to radio and release the button at the station conform to the Compact Disc (CD) standard. Recently, or television reception, which can be determined by 1 Turn on the system. desired point. Press FM MODE [_ repeatedly until "MONO" appears various music discs encoded with copyright protection turning the equipment off and on, the user is encouraged Press I/Q) (power) [_. to turn off stereo reception. technologies are marketed by some record companies. Select Repeat Play REPEAT [_ repeatedly until Owner's Record to try to correct the interference by one or more of the "REP" or "REPI" appears. Please be aware that among those discs, there are some 2 Select the clock set mode. following measures: To listen to XM Tile model aud serial uumbers are located ou tile rear of the uuit. Record these uumbers iu the space that do not conform to the CD standard and may not be Press CLOCK/TIMER SET [_ on the remote. If the Select a disc DISC SKIP [_ on the remote (or -Reorient or relocate the receiving antemm. You can operate and listen to the XM slttellite Radio by provided below. Refer to them wheuever you call upou your Souy dealer regarding this product. playable by this product. N- current mode appears on the display, press I._1_1/1_1_t DISC 1 - 5 [_ or DISC SKIP [_ %...... Model No. Serial No. - [ncrease the separation between the equipment and [_ on the remote repeatedly to select "CLOCK SET" (in stop mode) on the unit). cotmecting your XM Cotmect-and-Play antemm. Before receiver. using the system, cotmect the XM Cotmect-and-Play • ATRAC, ATRAC3, ATRAC3plus and their loges are and then press ENTER [_ on the remote. -Cotmect the equipment into an outlet on a circuit Switch to CD DISC 1 - 5 [_ on the unit antemm to the XM jack of the system (see "Hooking up trademarks of Sony Corporation. [] 3 Set the time. different from that to which the receiver is cotmected. function from (Automatic Source Selection). the system securely"). • SonicStage and SonicStage logo are ttademarks or auother source -Consult the dealer or an experienced radio/TV registered trademarks of Sony Corporation. Press I_1_1/1_1_1[_ on the remote repeatedly to set 1 Select "XM." technician for help. the hour, and then press ENTER [_ on the remote. Exchange other EX-CHANGE [_ on the unit. • MPEG Layer-3 audio coding technology and patents Press XM on the remote (or TUNER/BAND Use the same procedure to set the minute. discs while playing licensed from Ftaunhofer [IS and Thomson. repeatedly) [_. DIGITAL AUDIO READY You are cautioned that any changes or modifications • The XM name and related loges are registered When you turn off the system after setting the clock, CMT-HPR99XM 2 Select the All Channel mode. not expressly approved in this manual could void your trademarks of XM Satellite Radio [nc. the clock display appears instead of the demonstration To change the play mode authority to operate this equipment. display. Press PLAY MODE [_ repeatedly while the player is Press TUNING MODE [_ repeatedly until "CAT" © 2006 Sony Corporation Printed in China paper using VOC (Volatile Organic Compound)-free stopped. You can select normal play ("ALL DISCS" for and "PRESET" disappear. i_ Printed on 100% recycled I/(I) The clock settings are lost when you discotmect the http://www.sony.net/ vegetable oil based ink. Note to CATV system installer: power cord or if a power failure occurs. all discs, "1 DISC" for a disc, or "[_*" for all "ATRAC" 3 Tune in the desired channel. This reminder is provided to call the CATV system files and MP3 files in the folder on the disc), shuffle [] Press +/- on the remote (or TUNING+/- on the unit) installer's attention to Article 820-40 of the NEC play ("ALL DISCS SHUF," "IDISC SHUF," or "_ This symbol is intended to alert the [_ repeatedly. that provides guidelines for proper grounding and, SHUF*"), or program play ("PGM"). user to the presence of uninsulated in particular, specifies that the cable ground shall be Selectinga musicsource *Whenplaying a CD-DAdisc, (_ (SHUF)Playperl_wmsthe same "dangerous voltage" within the operationas IDISC (SHUF)Play. To select a channel by Category mode cotmected to the grounding system of the building, as product's enclosure that may be of Press the following buttons (or press FUNCT[ON [_ on 1 Press XM on the remote (orTUNER/BAND To reduce the risk of fire or electric close to the point of cable entry as practical. the remote repeatedly). To select a CD track using the number repeatedly) [_. shock, do not expose this apparatus to sufficient magnitude to constitute a risk of electric shock to persons. [] buttons To select Press 2 Press TUNING MODE _ repeatedly until "CAT" rain or moisture. U.S.A., Canadian and Australian Press the number buttons [_ on the remote during CD CD [_ on the remote. appears. This symbol is intended to alert the models only normal play. For example, to enter 20, press >10, 2, 10/0, user to the presence of important Tuner TUNER/BAND [_. in that ordet: 3 Press CATEGORY +/- on the remote (or CAT ENERGY STAR °_is a U.S. registered CAUTION operating and maintenance (servicing) +/- on the unit) [_ repeatedly. Component (cotmected AUDIO IN [_. The use of optical instruments with this product will mark. As an ENERGY STAR °' partnet; To create an "ATRAC"/MP3 disc instructions in the literature 4 Press +/-on the remote (orTUNING +/-on the increase eye hazard. Sony Corporation has determined that using an audio cord) You can create an "ATRAC" disc and MP3 disc with the accompanying the appliance. unit) [_ repeatedly. this product meets the ENERGY STAR _" SonicStage software. SonicStage can be Notice for the customers in the guidelines for energy efficiency. downloaded free of charge fiom the following sites and To select a channel using the number U.S.A. [] installed on your computer. buttons Adjusting the sound For customers in the U.S.A.: Press the number buttons [_ on the remote. For example,
REFER SERVICING IO QUALIFIED SERVICE PERSONNEL, Ouly the first 6 characters are displayed when performing the fohler Generate a more dynamic DSGX [_ on the unit. search, track search, or tile search. sound (Dynamic Sound Notes on Repeat Play Generator X-tra) Changingthe display • All tracks or tiles on a disc are played repeatedl> up to five times. Set the sound effect EQ [_ on the remote • You cannot select "REP" and "ALL DISCS SHUF" at the same time. repeatedly to select "BASS" To change Press • "REP 1" indicates that a single track or file is repeated until you or "TREBLE." and then stop it. [nfornmtion on DISPLAY [_ repeatedly when the press +/- [_ on the remote the display* system is on. repeatedly to adjust the level. Notes on playing MP3 discs Before using the system • Do not save other types ol tiles or unnecessary t'ohlers on a disc that Display mode DISPLAY [_ repeatedly when the has "ATRAC" and MP3 files. (See below.) system is off. • Folders that have no "ATRAC" and MP3 files are skipped. To use the remote * • "ATRAC" aud MP3 tiles are played back in the order that they are For example, you cau view CD/"ATRAC"/MP3 disc int'ormation, When carrying this system Slide and remove the battery conlpartment lid [_, and Playinga CD/ATRAC/MP3disc recorded onto the disc. such as the track or file number or [older name duriug normal play. insert the two supplied R6 (size AA) batteries, _ side • The system can only play MP3 tiles that have a tile exteusion of or the total play time while the pla_er is stopped. You cau also view 1 Remove all discs to protect the CD mechanism. ".MP3." XM radio iut_)rmation, such as the channel name, song title and first, matching the polarities shown below. artist uanle. 1 Select the CD function. • If there are files on the disc that have the ".MP3" file extension, 2 Press CD [_ on the remote to select the CD Press CD [_ on the remote. but that are not MP3 files, the unit may produce noise or may The system offers the following display modes. function. malt'uuction. 2 Place a disc. • The maximum number of': 3 Hold down • (stop) [_ on the unit, and press Display mode When the system is off, _t "ATRAC" Rdders is 255. DISC 1 _ until "LOCK" appears. Press _ (CD open/close) [_ on the unit, aud place a "ATRAC" files is 999. Demonstration The clock display is replaced by disc with the label side up on the disc tray. 4 Unplug the power cord. MP3 liqders is 255 (including the root {'older). lighting and flashing of the display MP3 files is 511. window. MP3 files aud li)lders that can be contained on a single disc is 512. Clock The clock is displayed. lk)lderlevels (the tree structure of files) is 8. Power • Compatibilil? with all MP3 encoding/writing sol}ware, recording Power Saving The display is turned off to conserve device, and recording media cannot be guaranteed. Incompatible Mode _ power. The timer and clock continue Cotmect the power cord to a wall socket. Notes on using the remote MP3 discs may produce noise or interrupted audio or may not play to operate. If the plug does not fit the wall socket, detach the supplied • With normal use, the batteries shouhl hlst t'or ahout six mouths. at all. plug adaptor (only for models equipped with an adaptor). • Do not mix an old battery with a new one or mix dit'fi:rcnt types of • If "ATRAC" files and MP3 tiles arc recorded on the same disc, this _iThe STANDBY iudicator lights up when the system is o1_. batteries. system plays the "ATRAC" tiles first. 2)When the systemis in PowerSavingMode. the t'ollowinglm_ctions • It' you do not use the remote li_wa long period of time, remove the are unavailable: batteries to avoid damage li'om battery leakage and corrosion. Notes on playing multisession discs settingthe clock To insert additional discs, slide the disc tray with your • II the disc begins with a (-'[)-DA (or "ATRAC"/MP3) session, it is changingthe AMtuning interval To receive the XM Satellite Radio recognized as a CD-DA (or "ATRAC"/MP3) disc, and other sessions Speakers finger its shown below. changing the CD power managet'uuction are not played back. Introducing XM Satellite Radio • A disc with a mixed CD liwmat is recognized as a CD-DA (audio) Notes on the display information XMRadio is the satellite radioservice with millions ol listeuers disc. • The l_qlowingare not displayed; m_ Wall socket acrossthe U.S. Broadcastiuglivedaily. XM Radio ollbrs 160 totalplayiug time li_waCD-DAdisc depeudiugon the play mode. digitalradio channels offeringmusic,news,sports, comedy,talk. totalplayiug time l_)ran "ATRAC"/MP3disc. eutertaiument,trallic and weatherreports, withhigh qualilydigital remainingplayiug timeli_wan MP3 tile. souud. Leftspeaker_ Listening to the radio • The l_qlowingare not displayed correctly; How to Subscribe elapsed playing timeof an "ATRAC"tile or MP3 tile eucoded XM $12.95 monthl) service subscription sold separately. X]M usingaVBR (variablebitrate). XM antenna Connect aud Play (TM) anteuua required to receive XM service (sold To listen to FM or AM [older andtile names that do not followeither the ISO9660Level separately). Installation costs and other t'ces and taxes, inchldiug a 1.Level2 or Jolietin the expansionl_)rmat. (Nmnect the XM (Nmnect-and-Play antemm. one-time activation t'ce may apply. Subscription De is consumer only. 1 Select "FM" or"AM." • The l_qlowingare displayed; For details, see "To receive the XM Sittellite Radio." XM C0nnect-and-Play All t'ees and programming subject to change. Channels with li'equent To close the disc tray, ptess _ (CD open/close) [_ on 1[)3tag int'ormationfor "ATRAC"tiles andMP3 tiles when1[)3 explicit language arc indicated with an XL. Chanuel blocking is Press TUNER/BAND [_ repeatedly. antenna(not supplied) the unit again. version 1and version2 tags are used. available li_wXM radio receivers by calliug 1-800-XMRADIO. up to 62 characters of 1[)3tag int'ormationusinguppercase letters Subscriptions subject to Customer Agreement available 2 Select the tuning mode. Do not force the disc tray closed with your finger, as (A to Z),numbers(0 to9), and symbols(" $ _A'()*+. ./<= at xmradio.com. XM service only available in the 48 contiguous this may damage the unit. Press TUNING MODE [_ repeatedly until "AUTO" >@1\] "{I}!'7%. Uuited States. XM Ready and XM Connect-and-Play are trademarks appears. of XM Satellite Radio Inc. (C)2005 XM Satellite Radio Inc. All rights 3 Start playback. reserved. 3 Tune in the desired station. Press _ (play) [_ on the remote (or CD/I_II (play/ Activate XM Service pause) [_ on the unit). Press +/- on the remote (or TUN[NG +/- on the unit) Usingoptionalaudio Find the 8-character XM Rmlio ID of' the Conuect-;md-Play autenna. [_. Scatming stops automatically when a station is With the Conuect-aud-Play autenna connected to the unit, the Radio To Press tuned in, and then "TUNED" and "STEREO" (for components ID can be li)und by selecting chauuel l) on the radio. Press >I0, 10/0, 10/0, 1010 [] on the remote in that order to select channel 0. Pause playback II (pause) [] on the remote (or stereo programs) appear. Record the Radio ID here for ret'crence: AM 100pantenna CD/I_II (play/pause) [_ on the To connect an optional headphones Antennas (NOTE: The XM Radio ID does not use the letters 1,O, S, or F.) unit). To resume play, press the (Nmnect l_eadphones to the PHONES jack [_ on the Activate your XM Satellite Radio service online Find a location and an orientation that provide good at http://activate.xmradio.com or by calling 1-800-XMRADIO button again. I__1 L __1 MHz unit. reception, and then set up the antemm. (1-81t(t-967-2346). You will need a major credit card. Stop playback • (stop) [_. STEREO Keep the antemms away from the speaker cords and FM(Extendleaditantennhorizontally.) XM will send a signal fi'om the satellites to activate the lilll channel To connect an optional component the power cord to avoid picking up noise. lineup. Activation normally takes 10 to 15 miuutes, but during peak Select a folder on +/- (select folder) [_. Or (Nmnect additional audio component to the AUDIO or busy periods, you may need to keep your player on liw up to au hour. an "ATRAC" disc or turn the jog dial [_ on the unit [N jack [_ on the unit using an audio analog cord (not When you can access the full channel lineup on your playen you're To stop automatic scanning done. MP3 disc and press PUSH ENTER [_ on Press • (stop) [_. supplied). Turn down the volume on the system, and then the unit (turn the jog dial [_ on press FUNCTION [_ on the remote repeatedly to select the unit during playback until the AUDIO [N function. otherregions "GROUP" appears, and then Whitesidefor North press PUSH ENTER [_ on the Americanmodel unit to select the desired folder). I__/ H Cleaning the cabinet To change the AM tuning interval II The AM tuning interval is factory-preset to 10 kHz. Clean this system with a soft cloth slightly moistened I_, K with a mild detergent solution. Do not use any type Use buttons on the unit to change the AM tuning interval. 1 I,,t M of abrasive pad, scouring powder, or solvent, such as Make sure the power cord and speaker cords are 1 Tune in any AM station, and then turn off the I! thim]er, benzine, or alcohol. correctly and firmly connected. Creating your own CD program Usingthe Timers system. t-t o 2 I_l (ProgramPlay) The system offers two timer functions. If you use Play Find your problem in the checklist below, and 2 While holding down I_I_t>L>D [_, press I/_ take the indicated corrective action. _-t Q Timer with the Sleep Timer, the Sleep Timer has priority. (power) [_. 12t Use buttons on the remote to create your own program. If the issue persists, contact your nearest Sony dealer. I-I R All the AM preset stations are erased. To reset the I-7 1 Press CD [_ to select the CD function. Sleep Timer: interval to the factory preset, repeat the procedure. _- S You can fall asleep to music. This function works even if -! 2 Press PLAY MODE [_ repeatedly until "PGM" If the STANDBYindicator flashes You cmmot change the AM tuning interval in Power Mainunit the clock is not set. AUDIO POWER SPECIFICATIONS Saving Mode. Z appears while the player is stopped. Immediately unplug the power cord, and check the POWER OUTPUT AND TOTAL HARMONIC DISTORTION: Press SLEEP [_ on the remote repeatedly. If you select 3 Press DISC SKIP _ to select a disc. following item. l !orl With 4 ohnt loads, both channels drivem front ] 20 10J)00 Hz: rated 85 watts "AUTO." the system automatically turns off after the • If your system has a voltage selector, is the voltage To improve tuner reception per channel ntinimunt RMS power, with no nlo1_2 than 10G total harmonic ,1 distortion lronl 250 milliwatts to rated output. 4 Press I_1_1/1_1_1[_ repeatedly or turn the jog current disc stops or in 100 minutes. selector set to the correct voltage'? Turn off CD player power by using the CD power dial [_ on the unit until the desired track number Amplifiersection • Are you using only the supplied speakers? management function. By defimlt, CD power is turned on. Play Timer: /y_ $ North American nlodel appears. You cannot change the setting in Power Saving Mode. ±t You can wake up to CD or tuner at a preset time. • Is anything blocking the ventilation holes on the rear DIN power output (rated): 68 + 68 W (4 ohms at 1 kHz, DIN) When programming "ATRAC" files or MP3 files, of the system'? Use buttons on the unit to turn off CD player power. l/ % Continuous RMS power output (relcrence): 85 + 85 W (4 ohms at 1 kHz, press (_ +/- (select folder) [_ repeatedly or turn the 10% THD) Use buttons on the remote to control the Play Timer After the STANDBY indicator [_ stops flashing, 1 Press CD/I_II (play/pause) [_ to select the CD jog dial [_ on the unit to select the desired folder, and Inputs Make sure you have set the clock. recomlect the power cord, and turn on the system. If function. / AUDIO IN: Sensitivity 250 mV, impedance of 47 kilohnls then select the desired file. 1 Prepare the sound source. the issue persists, contact your nearest Sony dealer Outputs 2 Press I/@ (power) _ to turn off the system. PHeNES (stereo mini jack): accepts headphones with an impedance of 8 Current disc Prepare the sound source, and then press VOLUME ohms or Ill(lie 3 After "STANDBY" stops flashing, press I/@ I--! ') +/- [_ to adjust the volume. t- SPEAKER: accepts impedance of 4 ohms Selected track Totalplayingtime of program (power) _ while holding ENTER [_. General n @ CDplayersection (includingselectedtrack orfile) To start from a specific CD track, "ATRAC" file or &l System: Contpact disc and digital audio system "CD POWER" and "OFF" appear. With CD player or file number Laser Diode Properties MP3 file, create your own CD program. ^ The display starts flashing as soon as you power turned off, disc access time is increased. To Emission Duration: Continuous 2 Press CLOCK/TIMER SET [_. plug in the power cord even though you turn on CD player power, repeat the procedure until Laser Out?ut',': Less than 44.6 #W *This output is the value measurement at a distance of 200 mnt h'ont the 3 Press I_1_1/1_1_1_ repeatedly to select "PLAY have not turned on the system. "CD POWER" and "ON" appear objective lens surlace on the Optical Pick-up Block with 7 mm apertuie. SET" then press ENTER [_. • Press DISPLAY [_ twice while the system is off. The Frequency response: 20 Hz - 20 kHz (_+2dB) 1 2 3_@_ Wavelength: 78t) - 790 nm demonstration disappears. "ON" appears, and the hour indication flashes. Toreset the systemto factory settings Tunersection Loaded disc If the system still does not operate properly, reset the FM stereo, FM/AM superheterodyne tuner 4 Set the time to start playing. Sound comes from one channel, or the left system to factory settings. You cmmot reset the system to FM tuner section: and right volumes are unbalanced. Discs that this system CAN play Tuning range: 87.5 - 1t)8.t) MHz 5 Press ENTER [_ to add the track or file to the Press 1_141/1_1_1[_ repeatedly to set the hour, factory settings in Power Saving Mode. Antenna: FM lead antenna program. and then press ENTER E_. • Place the speakers as symmetrically as possible. Use buttons on the unit to reset the unit to its factory • Audio CD Antelina tern/inals: 75 olulls unbalanced • Comlect only the supplied speakers. default settings. lnrcrmediate lrequency: 10.7 MHz .... appears when the total time exceeds 100 The minute indication flashes. Use the procedure • CD-R/CD-RW (audio data/"ATRAC" files/MP3 files) AMtunersection: above to set the minute. minutes for a CD, or when you select a CD track Severe hum or noise. 1 Disconnect and reconnect the power cord, and Tuning range: 530 1_710 kHz (with 10 kHz nufing interval) Discs that this system CANNOT play 531 - 1,7 l0 kHz (with 9 kHz tuning interval) whose number is 21 or over, or when you select an then turn on the system. 5 Use the same procedure as in step 4 to set the Antenna: AM loop antenna "ATRAC" file or MP3 file. • Move the system away from sources of noise. • CD-ROM time to stop playing. Antenna terminals: External antenna terminal • Comlect the system to a different wall socket. 2 Press PLAY MODE/TUNING MODE [_, • CD-R/CD-RW other than those recorded in music lnrcrnlediatc lrequency: 45() kHz 6 Repeat steps 4 through 5 to program additional 6 Select the sound source. • Install a noise filter (available separately) to the power DISPLAY [_ and I/@ (power) _ at the same CD format or "ATRAC" format and MP3 format tracks or files, up to a total of 25 tracks or files. time. Speaker Press I._1_1/1_1_1[_ repeatedly until the desired cord. conforming to [SO9660 Level l/Level 2, Joliet or Speaker system: 3-way, bass-reflex type Speaker unirs 7 To play your program of tracks or files, press sound source appears, and then press ENTER [_. The All user-configured settings, such as preset radio multisession The remote does not function. Woofer: 15 cm dia. cone type (play) [_. display shows the timer settings. stations, timer, and the clock, are deleted. • CD-R/CD-RW recorded in multisession that have not Tweeter: 4 cm dia. cone type • Remove any obstacles between the remote and the Super tweeter: 2 cm dia., ceramic type The program remains available until you open the disc ended by "closing the session" 7 Press I/@ (power) [_ to turn off the system. remote sensor [_ on the unit, and position the unit Nominal impedance: 4 ohnls tray. To play the same program again, select the CD • CD-R/CD-RW of poor recording quality, CD-R/CD- Dimensions (w/h/d): Approx. 182 x 320 x 244 mm The system turns on 15 seconds before the preset away from fluorescent lights. function, and press _ (play) [_. RW that have scratches or are dirty, or CD-R/CD-RW Mass: Approx. 3.0 kg her per speaker time. If the system is on at the preset time, the Play • Point the remote at the system's sensor recorded with an incompatible recording device General Timer will not play. • Move the remote closer to the system. Power requirements: 120 V A(', 60 Hz To cancel Program Play • CD-R/CD-RW which is finalized incorrectly CANT LOCK : The system cam]ot be locked after • Discs containing files other than MPEG 1 Audio Layer- Power consumption: 50 watts Press PLAY MODE []_ repeatedly until "PGM" The STANDBY indicator [] remains lit after To activate or check the timer again you have done the procedure of "When carrying this 3 (MP3) files Dimensions (w/h/d) (exch speakers): Approx. 180 x 280 x 360 mm disappears while the player is stopped. unplugging the power cord. Mass (exch speakers): 4.0 kg Press CLOCK/TIMER SELECT [_, press 1_14111_1_1 system." Turn the power off and then on again by • Discs of non-standard shape (for example, heart, Supplied accessories: Remote Conmmnder ( 1)/R6 (Size AA) batteries (2)/AM [_ repeatedly until "PLAY SEL" appears, and then press • The STANDBY indicator [_ may not turn off pressing I/Q) (power) [_ on the unit, then perform To delete the last track or file of the program square, star) loop antenna ( 1)/FM lead antenna (1) ENTER [_. immediately after unplugging the power cord. This the procedure. Press (.'LEAR [_ while the player is stopped. is not a malfunction. The indicator will turn off after • Discs that have adhesive tape, paper, or sticker attached US and if>reign patents licensed fronl Dolby Laboratories. CD OVER : You have reached the end of the disc while to them about 40 seconds. Design and specifications are subject re change To cancel the timer pressing _ (fast forward) [_ during playback or withour norice. To view program information, such as total • Rental or used discs with attached seals where the glue Repeat the same procedure as above until "TIMER OFF" pause. extends beyond the seal track number of the program appears, and then press ENTER [_. CD/MP3 player COMPLETE : The preset operation ended normally. • Halogenated flame relardants are not used in the Press DISPLAY [_ repeatedly. • Discs that have labels printed using ink that feels tacky LOCKED : The disc tray does not open. Contact your when touched , certainStandbyprintedpower wiringconsumption:boards. 0.5 W The sound skips, or the disc will not play. • Lead-l:ree solder is used lor soldering certain paris. Tip nearest Sony dealer To change the setting • Halogenated flame relardants are not used in cabinets. You can program additional tracks or tiles during playback by, using • Wipe the disc clean, and replace it. Notes on discs Start over from step I. NO DISC : There is no disc in the player, or you have (Except for the Uniled Stales model) the jog dial. • Move the system to a location away fl'om vibration (for loaded a disc that cmmot be played. • Before playing, wipe the disc with a cleaning cloth Tip example, on top of a stable stand). NOT IN USE : You pressed an invalid button. from the center out to the edge. The Play Timer setting remains as lung as the setting is nut canceled • Move the speakers away flom the system, or place manually. PUSH SELECT : You tried to set the clock or timer • Do not clean discs with solvents, such as benzine them on separate stands. At high volume, speaker during timer operation. thimler, or commercially available cleaners or anti- Presettingradiostations vibration may cause the sound to skip. PUSH STOP : You pressed PLAY MODE [_ during static spray intended for vinyl LPs. You can preset your favorite radio stations and tune Play does not start from the first track. playback. • Do not expose discs to direct sunlight or heat sources them in instantly by selecting the corresponding preset • Return to Normal Play by pressing PLAY MODE [_ SET CLOCK : You tried to select the timer when the such as hot air ducts, nor leave it in a car parked in uumbel: direct sunlight. repeatedly until both "PGM" and "SHUF" disappear. clock is not set. Use buttons on the remote to preset stations. SET TliViER : You tried to select the timer when the On safety 1 Tune in the desired station (see "Listening to the Starting playback takes more time than usual. Play Timer is not set. • The unit is not discomlected from the AC power source radio"). • The following discs take a longer time to start playback. STEP FULL :You tried to program more than 26 tracks (mains) as long as it is comlected to the wall socket, 2 Press TUNER MEMORY [_. -a disc recorded with a complicated tree structure. or files (steps). even if the unit itself has been turned off. -a disc recorded in multisession mode. TIME NG : The Play Timer start and end times are set to • Completely discomlect the power cord (mains lead) the same time. -a disc that has not been finalized (a disc to which data from the wall socket (mains) if it is not going to be h/I L'7 I_/I I--I I L_I I I I_ I I I_1 _1 can be added). used for an extended period of time. When unplugging -a disc that has many folders. XM I TUN/__ED the unit, always grip the plug. Never pull the cord ANTENNA : The XM Com]ect-and-Play antem]a is not itself. Tuner comlected. Check the comlection of the antemm cord, • Should any solid object or liquid get into the system, Preset number and then turn the system on again. unplug the system, and have it checked by qualified Severe hum or noise, or stations cannot be CH - - - : You have entered an invalid chmmel number persomlel before operating it again. 3 Press +/- [_ repeatedly to select your desired received. The chmmel to be tuned-in is void due to the change • The AC power cord can be changed only by a qualified preset number. • Com]ect the antem]a properly. by the broadcast service, or the receiving condition is service facility. If another station is ah'eady assigned to the selected • Find a location and an orientation that provide good not good. preset number, the station is replaced by the new reception, and then set up the antemm again. LOADING : The system have not finished receiving the On placement entire audio data or text information. Some buttons are • Do not place the system in an inclined position or in stations. • Keep the antemms away from the speaker cords and the not available. locations that are extremely hot, cold, dusty, dirty, or 4 Press ENTER [_. power cord to avoid picking up noise. humid or lacking adequate ventilation, or subject to • Comlect a commercially available external antemm. NO SIGNAL : The receiving condition is not good. Try 5 Repeat steps 1 through 4 to store other stations. moving the antemm to another location. Make sure vibration, direct sunlight or a bright light. • Consult your nearest Sony dealer if the supplied AM the antemm points south. For details about the antenna • Be careful when placing the unit or speakers on You can preset up to 20 FM, l0 AM and 20 XM antemm has come off the plastic stand. location, see the instructions supplied with the XM surfaces that have been specially treated (for example, stations. The preset stations are retained for about half • Turn off nearby electrical equipment. a day even if you discomlect the power cord or if a Comlect-and-Play antemm. with wax, oil, polish) as staining or discoloration of the OFF AIR : The chain]el is not broadcasted now. surface may result. power failure occurs. XM UPDATING :You have not subscribed for XM or the • If the system is brought directly from a cold to a warm 6 To call up a preset radio station, press TUNING chmmel is not authorized. You need to subscribe for location or is placed in a very damp room, moisture MODE [_ repeatedly until "PRESET" appears, The system cannot receive channels at all. XM. may condense on the lens inside the CD player, and and then press +1- [_ repeatedly to select the • Check that the XM Com]ect-and-Play antem]a is - - - : There is no text information or time information cause the system to malfunction. [n this situation, desired preset number. comlected. in the chmmel. This is not an errol: The text remove the disc, and leave the system turned on for Note on presetting XM stations • The receiving condition is not good. Move to the place information may not be displayed depending on the about a few hours until the moisture evaporates. Yeu cauuel preset XM stations except when you receive the slatien. where the condition is good. system condition, for example, right after the system On heat buildup • Check that you subscribed (see "To receive the XM has received a chmmel. Satellite Radio"). • Heat buildup on the unit during operation is normal and Display examples is not cause for alarm. "TUNING" keeps appearing and channels • Do not touch the cabinet if it has been used Display indicates cannot be received, or "ERR XXXX (XXXX continuously at a high volume because the cabinet may are alphameric characters)" appears /_Z/ 2 (two) have become hot. frequently. 5 5 (five) • Do not obstruct the ventilation holes. • Press I/Q) (power) [_ to turn off the system, and On the speaker system press the button again to turn on the system. If the I_/12 6 (six) issue persists, the XM Comlect-and-Play antemm may This speaker system is not magnetically shielded, and be broken. Have the antemm repaired or replace the /_/I.-2/ 8 (eight) the pictme on nearby TV sets may become magnetically In antemm with another antemm. iv/ 0 (zero) distorted. this situation, turn off the TV. wait 15 to 30 I'_/ minutes, and turn it back on. F/ A If there is no improvement, move the speakers far away from the TV. T_l B Z!
klrl D _l- G