SC-BTT190P_eng.book 1 ページ ２０１２年２月２０日 月曜日 午後５時５分

Owner’s Manual Blu-ray DiscTM Home Theater Sound System Model No. SC-BTT196 SC-BTT195 SC-BTT190

Unless otherwise indicated, illustrations in this Owner’s Manual are of SC-BTT196 for U.S.A.

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference.

If you have any questions, contact: U.S.A. and Puerto Rico : 1-800-211-PANA(7262) Canada : 1-800-561-5505

P PC VQT3X51-2

until 2012/03/07 SC-BTT190P_eng.book 2 ページ ２０１２年２月２０日 月曜日 午後５時５分

CAUTION Unit ≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ≥ Do not place sources of naked flames, such as lighted candles, IMPORTANT SAFETY on this unit. Placement INSTRUCTIONS To reduce the risk of fire, electric shock or product damage, ≥ Do not install or place this unit in a bookcase, built-in cabinet or Read these operating instructions carefully before using the unit. in another confined space. Ensure this unit is well ventilated. Follow the safety instructions on the unit and the applicable safety ≥ Do not obstruct this unit’s ventilation openings with instructions listed below. Keep these operating instructions handy newspapers, tablecloths, curtains, and similar items. for future reference. 1 Read these instructions. Speaker 2 Keep these instructions. 3 Heed all warnings. ≥ Use only supplied speakers 4 Follow all instructions. The main unit and supplied speakers are to be used only as 5 Do not use this apparatus near water. indicated in this Owner’s Manual. Failure to do so may lead to 6 Clean only with dry cloth. damage to the amplifier and/or the speakers, and may result in 7 Do not block any ventilation openings. Install in accordance the risk of fire. Consult a qualified service person if damage has with the manufacturer’s instructions. occurred or if you experience a sudden change in performance. 8 Do not install near any heat sources such as radiators, heat ≥ Be careful not to cross (short-circuit) or reverse the polarity of registers, stoves, or other apparatus (including amplifiers) that the speaker wires as doing so may damage the speakers. produce heat. ≥ Do not hold the speaker in one hand to avoid injury by dropping 9 Do not defeat the safety purpose of the polarized or the speaker when carrying. grounding-type plug. A polarized plug has two blades with one ≥ You can damage your speakers and shorten their useful life if wider than the other. A grounding-type plug has two blades and a you play sound at high levels over extended periods. third grounding prong. The wide blade or the third prong are ≥ Do not touch the front netted area of the speakers. Hold by the provided for your safety. If the provided plug does not fit into your sides. outlet, consult an electrician for replacement of the obsolete outlet. ≥ When carrying speakers, hold the stand and base parts. 10 Protect the power cord from being walked on or pinched ≥ Place speakers on flat, secure surfaces. particularly at plugs, convenience receptacles, and the point ≥ To avoid injury by falling or dropping the speaker, place the where they exit from the apparatus. speaker cables with care not to stumble or hook. 11 Only use attachments/accessories specified by the ≥ Do not stand on the base for the speaker. Be cautious when manufacturer. children are near. 12 Use only with the cart, stand, tripod, bracket, or table specified by the Batteries manufacturer, or sold with the apparatus. Mishandling of batteries can cause electrolyte leakage which When a cart is used, use caution when can damage items the fluid contacts and may cause a fire. moving the cart/apparatus combination to ≥ Danger of explosion if battery is incorrectly replaced. Replace avoid injury from tip-over. only with the type recommended by the manufacturer. 13 Unplug this apparatus during lightning storms ≥ When disposing the batteries, please contact your local or when unused for long periods of time. authorities or dealer and ask for the correct method of disposal. 14 Refer all servicing to qualified service personnel. Servicing is ≥ Do not mix old and new batteries or different types at the same time. required when the apparatus has been damaged in any way, ≥ Do not heat or expose to flame. such as power-supply cord or plug is damaged, liquid has been ≥ Do not leave the battery(ies) in a car exposed to direct sunlight spilled or objects have fallen into the apparatus, the apparatus for a long period of time with doors and windows closed. has been exposed to rain or moisture, does not operate ≥ Do not take apart or short circuit. normally, or has been dropped. ≥ Do not attempt to recharge alkaline or manganese batteries. ≥ Do not use batteries if the covering has been peeled off. WARNING Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Unit To reduce the risk of fire, electric shock or product damage, ≥ Do not expose this unit to rain, moisture, dripping or splashing. ≥ Do not place objects filled with liquids, such as vases, on this unit. ≥ Use only the recommended accessories. ≥ Do not remove covers. ≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.

AC power supply cord ≥ Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs.

Small object (Inside of product) ≥ Keep the Memory Card out of reach of children to prevent swallowing. ≥ Keep the screws out of reach of children to prevent swallowing.

2 VQT3X51 ≥ Tablecontents of SC-BTT190P_eng.book 3 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 3 SC-BTT190P_eng.book sn h Pdihn ...... 22 ...... Using the iPod/iPhone Playback ...... 20 19 ...... UserMode Multi 18 ...... menu HOME 17 ...... speakers unit’s with TV Enjoying 17 ...... Inserting removing or media STEP 5: Settings...... 15 14 .... to anAC source power 4: Connecting STEP 12 ...... 3: Connections STEP 11 ...... 2: speakers Preparing the STEP 10 ...... STEP 1: Positioning 8 ...... Control reference guide ...... 6 Playable media 5 ...... Unit and media care 4 ...... and accessories contents Package 2 ...... INSTRUCTIONS SAFETY IMPORTANT ≥ illustrations in this Owner's Manual. illustrations inthisOwner's Please notethatthe actual controls and components,menuitems, etc. may looksomewhatdifferent fromthoseshowninthe Frwr pae ...... 16 ...... updates •Firmware 15 ...... Network Setting •Easy 15 ...... Setting •Easy io/PoePabc ...... 22 ...... Playback •iPod/iPhone 22 ...... Connection •iPod/iPhone Restriction on use ofunauthorized copied content Getting started Getting Playback eu eu ...... 31 menu Setup ...... 28 menu Option ...... 27 feature Network Home ...... 26 etc.) (NETFLIX, Network Enjoying Service ...... 25Listening to the Radio Control “HDAVI VIERA Link Index ...... Back cover ...... 50 Warranty Limited ...... 46 information Supplemental Specifications ...... 45 ...... 43 Messages ...... 40 guide Troubleshooting ...... 38 installationoption Speaker ...... 37 allspeakers from effects sound Enjoying Ejyn VadSBwt ntssekr ..... 24 ...... speakers unit’s with STB and TV •Enjoying Sekrstig ...... 36 ...... settings •Speaker Advanced operations

( TM > 46) TM TV & Radio Reference ” ...... 23 VQT3X51 3

Advanced Reference operations TV & Radio Playback Getting started SC-BTT190P_eng.book 4 ページ ２０１２年２月２０日 月曜日 午後５時５分

Getting started Package contents and accessories Check the package contents and supplied accessories before using this unit. Package contents

[BTT196] [BTT195] [BTT190] Main unit Main unit (SA-BTT196/SA-BTT195) (SA-BTT190)

FRONT CENTER SUBWOOFER FRONT SURROUND (SB-HF185) (SB-HC190) (SB-HW190) (SB-HF190) (SB-HS190)

(Speakers)

(Speaker cable) (Speaker cables)

(Stands)

SURROUND CENTER SUBWOOFER (SB-HS190) (SB-HC190) (SB-HW190)

(Bases)

(Screws)

Parts number Parts [BTT196] [BTT195] [BTT190] RYP1714B-K: RED Stands (with cables) j RYP1714A-K: WHITE Bases RYP1745-K k 2 j Screws XSN5i12FJKk 8 j REEX1267A: WHITE REEX1270: BLUE REEX1266A: RED Speaker cables REEX1269: GRAY REEX1270: BLUE REEX1268: GREEN REEX1269: GRAY REEX1268: GREEN

4 VQT3X51 ≥ ≥ ≥ ≥ ≥ ∫ Wipe with a dampcloth and then wipe dry. ∫ ≥ ∫ ≥ ≥ ∫ Unit and media care ≥ [For_Canada] ≥ ≥ SC-BTT190P_eng.book 5 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 5 SC-BTT190P_eng.book ∏ ∏ DO Do usethenot following discs: card. the of side rear on the terminals the water,from dust, matter Clean any or foreign any other solvent. thinner, static electricity liquidsprevention or Do usedisc cleaning not benzine, sprays, discs. to stickers labelsattach or Do not disc. the fingerprints on or scratches Handle bythe edgestodiscs avoidinadvertent unit’s lens. cleanthe supplied) to cleaner(not lens Use the read the instructions that came with cloth.the using treatedBefore cloth, carefully chemically clean this unit. to benzine paint or alcohol, thinner use Never The enclosed Canadian French label sheet corresponds totheEnglishdisplayonunit. Frenchlabelsheetcorresponds The enclosedCanadian cordwithotherequipment. Do notuseACpowersupply of December2011. Manualcorrectas inthisOwner’s Product numbersprovided subjecttochange. Thesemaybe precautions handling Disc andcard Clean discs unit’sThis lens cloth a Clean thisunitwith soft, dry Accessories (N2QAYB000727) 1 Remote control Remote 1 Batteries for 2 remote control DO NOT ∏ (K2CB2CB00021) cord supply ACpower 1 ∏ memory of this unit. this of memory in the be recorded may history operation The preset.”) factory ( user settings. the delete to presets factory the to settings the or transfer, then follow to the return procedure all by disposal either unit this discard you unit. If the in information settings user the keep may unitThe ∫ – Irregularly shaped discs, such as heart suchasheart shapeddiscs, Irregularly – Discs that arebadlywarpedor cracked. – removed Discs adhesivefrom with exposed – (RSAX0002) 1 FM indoor antenna indoor FM 1 To dispose thisunit ortransfer shapes. etc). discs, (rented labels or stickers > 0 “To the to all settings return 40, ∏ Sheet ofspeaker 1 cable sticker cable VQT3X51 5

Getting started SC-BTT190P_eng.book 6 ページ ２０１２年２月２０日 月曜日 午後５時５分

Playable media Type Logo examples Type detail Playable contents BD-Video Video BD BD-RE Video, JPEG, MPO BD-R Video, MKV

DVD-Video Video

DVD-R

Video, AVCHD, MKV, JPEG, DVD MPO, FLAC, MP3, WAV DVD-R DL

DVD-RW Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA] CD MKV, JPEG, CD-R — MPO, FLAC, MP3, CD-RW Music [CD-DA], WAV SD Memory Card (from 8 MB to 2 GB) SD SDHC Memory Card (from 4 GB to 32 GB) AVCHD, AVCHD 3D, MP4, SDXC Memory Card (48 GB, 64 GB) MPEG2, JPEG, MPO (Compatible with both mini and micro types) USB devices MP4, MPEG, MKV, JPEG, USB — (up to 2 TB) MPO, FLAC, MP3, WAV

≥ See pages 7 and 46 for more information on the types of content that can be played.

6 VQT3X51 ≥ ≥ ∫ inBD-Video.adopted Resolution andDTS-HDAudio) Audio Master Digital Plus, Dolby TrueHD, DTS-HD High audio (Dolby ratebit high supports unit This ∫ instructions. the recorder’s to refer this unit. Please to playon recorder by the finalizedrecorder, be a to by needs recorded etc. andCD-R/RW DL +R/+RW/+R DL, DVD-R/RW/R ∫ the regionnumber supporting DVD-Video discs play can unit This DVD-Video region code the supporting BD-Video discs play can unit This BD-Video ∫ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ supported orpreviouslydescribed. specifically not is that disc other Any ∫ SC-BTT190P_eng.book 7 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 7 SC-BTT190P_eng.book Example: Example: 2D video can be enjoyed as 3D virtually.as enjoyed be can 2D video ( Cable. compatible TV using aHigh Speed HDMI back when this unit to isconnected a 3D played be pictures can still and 3D 3D videos sec BD-Video recordedat a rate discs of 50 fields/ HD DVD PAL discs discs DivX of All types discs WMA VideoCD Super Video and CD DVD-Audio CD Photo CD Audio Super DVD-RAM 3D BD-Video Finalize information Region management this unit Discs that cannot be played in “A” . 1 “1” or ALL “ALL” . 1 2 4 > 31) ≥ ≥ ∫ ≥ ≥ ∫ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ∫ ≥ ≥ ≥ This unit does not support USB device charging. device USB support not does unit This exFAT. in FAT32 format and SDXC MemoryCardsin FAT16 formats, as well as SDHC Memory Cards that meetCard SD Specifications FAT12and Thisunit iscompatible with SDMemory Cards prevention tabprevention (onthe SDcard) to “LOCK”. To record the move contents, card’s the protect provided. customer otherwise or cards, such with supplied usually are These card. but beusedwithmust an adaptor be used, can Cards microSDXC and Cards microSDHC Cards, microSD Cards, miniSD not be so playback may possible. Compact Digital formatthe Disc Audio (CD-DA) does not themeet technical ofspecifications DualDisc a of digitalside The audio content guaranteed. be cannot etc.) CDs, specif CD-DA to conform not that do CDs of quality and sound Operation power from an power from source. external Supply supplied. be not may HDD the to power and NTFS. If the is notHDD recognized the in FAT32formatted HDD supports an unit This Speed.High supports USB2.0 unit This are supported. FAT12, FAT16, FAT32 and file NTFS systems devices. USB all not unitThis with connection guarantee does capacity.card the than less slightly be may memory Useable be eraseddue theto cardbeing etc. formatted contents may recorded devices, or computers incompatible with is used card SD If the instructions carefully. Manual.Readthedisc’s described inthisOwner’s as not alwaysbeabletocontrolplay played, soyoumay disccancontrolhowdiscsare The producersofthe created. methodandhowthefileswere recording, therecording the type ofmedia,thecondition cases duetothe toplaytheabovemediainsome It maynotbepossible SD card Music CD USB deviceUSB ications (copy control control (copy ications VQT3X51 7

Getting started SC-BTT190P_eng.book 8 ページ ２０１２年２月２０日 月曜日 午後５時５分

Control reference guide 1 Turn the unit on and off Remote control 2 Select title numbers, etc./Enter numbers or characters 13 [CANCEL]: Cancel 3 Select the source リワヱヶヵ 1 モヷ 4 Basic playback control buttons (> 20) 5 Select preset radio stations (> 25) 6 Show status messages (> 20) 2 7 Show the Home screen of the VIERA 14 Connect (> 26) 8[3, 4, 2, 1]: Move the highlight for selection 15 [OK]: Confirm the selection 3 (2;)(;1): Frame-by-frame (> 20) ュリヴヤ ㄊヱㄐㄅ 16 9 Show OPTION menu (> 28) 10 Colored buttons 4 ヴユモンヤラ ヱロモヺ ヴユモンヤラ 17 Used for various purposes depending on the ヴレリヱ ヴロヰヸ ヴレリヱ display 5 ヱモヶヴユ 11 Set the sound mode (> 37) 12 Select surround sound effects (> 37)/Set the ヴヵヰヱ ユヹリヵ 6 18 sleep timer ラヰヮユ 1Press and hold [–SLEEP].

ヱ ヵ ヵ ヰ ヰ 2While “SLEEP ££” is displayed, press ユ ヱ ヱ ノヶ チ 19 ヮ ワ ヱ チ ユ ン チヮ ワ [–SLEEP] several times to select the time ユ ユ ヶ 7 ヵ ワ

ワ ヶ リ 20 (in minutes). 8 ≥ Timer selection is up to 120 minutes. ンユヵヶンワ ≥ Select “OFF” when canceling the setting. 9 21 ≥ To confirm the remaining time 10 Press and hold the button again. 13 TV operation buttons 11 22 [Í TV]: Turn the television on and off 12 [AV, INPUT]: Switch the input select 23 [ijVOL]: Adjust the volume 14 Adjust the volume of the main unit 15 Mute the sound ≥ “MUTE” flashes on the unit’s display, while the function is on. ∫ Using the remote control ≥ To cancel, press the button again or adjust the volume. Insert so the poles (i and j) match those in the Muting is canceled if the unit is turned off. remote control. ≥ 16 Show NETFLIX screen  17 Select radio stations manually (> 25) 18 Exit the menu screen 19 Show HOME menu (> 18)  20 Show Pop-up Menu/Top Menu (> 20) 21 Return to previous screen R6/LR6, AA 22 Start up a video communication (> 26) 23 Select speaker channel (> 37)/Select audio (Alkaline or (> 20) manganese batteries)

Point it at the remote control signal sensor on this unit. (> 9)

8 VQT3X51 1 4 Disc tray Disc 4 the Adjust volumeof the main unit 3 4 LAN port port LAN ( 4 Coolingfan 3 Speaker (> terminals ( terminal 2 IN AC 1 5 USB port (> port USB 5 2 Open or close the disc tray ( tray disc the close or Open 2 SC-BTT190P_eng.book 9 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 9 SC-BTT190P_eng.book Standby/on switch is still consuming a small amount of power. of amount a small consuming is still unit the mode, standby In vice versa. or mode to switch unit the Press on tofrom standby 12 Main unit (Rear) Main unit (Front) 1 > 14) 4 26) 14, 2 > 58 45 14) [ Í/I] ( 12) 3 > > 15) 17) OPEN/CLOSE 4 SD CARD VOL 3 5 iPod 6 6 5 SD card slot ( slot card SD 5 7 Remote control control Remote signal sensor 7 6USB port( Display 8 DIGITALAUDIO INterminal ( 7 AV HDMI ( terminal (ARC) OUT 6 9 FM radio FM terminal antenna ( ( 9 terminal AUX 8 7 nl:Apo.20 Approx. Angle: ft.) (23 m 7 approx. Distance: Within right 8 9 7 > 7 22) 17, > > 17) 12) o up anddown, 30 > > 13) > 2,13) , 12 VQT3X51 12) o left and 9

Getting started SC-BTT190P_eng.book 10 ページ ２０１２年２月２０日 月曜日 午後５時５分

STEP 1: Positioning For optimum position Place the front, center and surround speakers at approximately the same distance from the seating position. ≥ Adjust the volume using the Delay time function if the distance between each speaker and the seating position is not equal. (> 37)

e.g., [BTT196]  

 60° 

 120°



A Center speaker B Front speakers ≥ Put on a rack or shelf not to interfere with C Subwoofer the TV's various sensors (ambient light, D Surround speakers etc.). Vibration caused by the speaker can ≥ Place the speakers at the same height or disrupt the picture if it is placed directly on higher than ear level. the TV.

≥ Keep your speakers at least 10 mm (13/32z) away from the system for proper ventilation. ≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains. ≥ For optional wall mount, refer to page 38.

10 VQT3X51 e.g., speaker Surround speakers. the to cables speaker the connect and (supplied) sticker cable speaker the Attach ≥ 3 1 theSTEP 2:Preparing speakers SC-BTT190P_eng.book 11 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 11 SC-BTT190P_eng.book Speaker sticker cable SURROUND Lch Lch SURROUND 2 Rch FRONT 1 Lch FRONT SURROUND Rch Rch SURROUND SUBWOOFER SUBWOOFER CENTER Speaker (supplied) sticker cable Connector To clothandperformassemblyonit. laydownasoft preventdamageorscratches, Attach the stand to base.the Attach the speaker. Assembling the front speakers speakers front the Assembling Connecting the speaker cables Speaker indication 5 6 3 4 SURROUND Lch  80 80 space of about the Leave base. the through cable speaker the Thread RED WHITE Connector BLUE GREEN GRAY PURPLE mm (3 5 / 32 q). BT9][BTT195] [BTT196] 4 2 Tighten securely. the (supplied) screw securely. (supplied) screws 3 Tightenthe Push : Blue line Blue s: r: White the groove. the into cable speaker the Slide VQT3X51 11

Getting started SC-BTT190P_eng.book 12 ページ ２０１２年２月２０日 月曜日 午後５時５分

STEP 3: Connections Turn off all equipment before connection and read the appropriate owner’s manual. Do not connect the AC power supply cord until all other connections are complete. Speaker connection Connect the speaker cables to the terminals of the same color.

Connection to a TV ∫ HDMI ≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less. Recommended part number (High Speed HDMI Cable): RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc. ≥ Audio will be output through the system's speakers when “Off” is selected in “HDMI Audio Output”. (> 33) ∫ TV Audio ≥ To output TV audio from this unit's speakers, you need to switch the selector. (> 17) ∫ OPTICAL IN ≥ After making the digital audio connection, make settings to suit the type of audio from your digital equipment. (> 33)

HDMI cable (not supplied) OPTICAL HDMI OUT AUDIO OUT

L

R Audio cable*2 (not supplied)

Optical digital audio cable*1 (not supplied)

*1 If the HDMI terminal on the TV is labeled “HDMI (ARC)”, the connection of the optical digital audio cable is not required. *2 It is also possible to use an audio cable instead of the optical digital audio cable. In this case, connect the AUX terminal on the main unit with the audio output terminal on the TV. What is ARC? ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home theater system to receive and play audio from the TV through a signal HDMI cable without additional wiring.

12 VQT3X51 e.g., ≥ SC-BTT190P_eng.book 13 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 13 SC-BTT190P_eng.book Use an FM outdoor antenna if radio reception is poor.Use anFMoutdoorantennaifradioreceptionis Other device connection connection antenna FM Set TopSet etc. Box, FM indoor indoor FM (supplied) antenna is best. reception the pillar where Affix this endof the antenna to a wall or OPTICAL OUT (not supplied) (not Optical digital audio cable VQT3X51 13

Getting started SC-BTT190P_eng.book 14 ページ ２０１２年２月２０日 月曜日 午後５時５分

Connection to the network The following services can be used when this unit is connected to broadband. ≥ Firmware can be updated (> 16) ≥ You can enjoy VIERA Connect (> 26) ≥ You can enjoy BD-Live (> 21) ≥ You can access other devices (Home Network) (> 27)

For details about connection method, refer to the instructions supplied with the connected equipment.

Wireless LAN connection ≥ Connect the Wireless LAN Adaptor DY-WL5 (optional). Only DY-WL5 can be used. Read the operating instructions for DY-WL5 thoroughly when using it.

Wireless Internet router, etc.

≥ For up-to-date compatibility information on your wireless router refer to http://panasonic.jp/support/global/cs/ (This site is in English only.) For additional information about this unit refer to http://www.panasonic.com/consumer/support (For U.S.A.) ≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.

LAN cable connection

LAN Cable (not supplied)

Broadband Internet router, etc. ≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. ≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit. STEP 4: Connecting to an AC power source Connect only after all other connections are complete.

AC power supply cord (supplied)

To a household AC outlet ≥ This unit consumes a small amount of AC power (> 45) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

14 VQT3X51 ≥ ≥ ≥ Preparation settings. connection Follow the instructions to on-screen apply your [OK]. press and “Wired” Select Network Setting”. “Easy perform can you Setting”, “Easy After completing ≥ 2 1 appropriate video input on the television. Turn on televisionand the select the Preparation settings will appear. [ and pressing first time After yournew connecting STEP 5:Settings ≥ SC-BTT190P_eng.book 15 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 15 SC-BTT190P_eng.book displayed, check that the Wireless thatdisplayed, theLAN Adaptor check Wireless is connected.” not is Adaptor LAN If “Wireless key(password).encryption please be sure youyour know that encrypted, is connection wireless yourIf Obtain your network name( Setting” in the Setup menu. ( Setting” intheSetup You anytimebyselecting“Easy canperformthissetup Language” is acquired by thisunit. Language” isacquired ontheTVsuchas“On-screen then settinginformation supporting HDAVI 2orlaterviaanHDMIcable, Control toaPanasonicTV(VIERA) If thisunitisconnected apply the settings. the apply and instructions Follow on-screen the appears. screen Setup Press [ Easy NetworkSetting Easy Network Setting Easy Setting Cretstig Wired : Currentsetting Select aconnectionmode. portandselect"Wireless." ConnecttheWirelessLANAdaptor(DY-WL5)toUSB Wireless LANconnection: ConnectaLANcabletotheunitandselect"Wired." LAN cableconnection: Wireless connection Wireless connection Wired OK RETURN Í ]. Wireless Wired Í > ], a thescreen basic for home theater for hometheater for the 35) > 16, SSID). 16, perform the the settings. perform 2 1 2 encrypted is network wireless your When 1 The available wireless networks will bedisplayed. ∫ WPS (Wi-Fi ProtectedSetup supports thatrouter wireless a using are If you ∫ display, advice. for dealer your consult the in no change still is there it. If reconnect is fully inserted. Alternatively, disconnect and “Search for wireless network” method)” “WPS (PUSHbutton instructions and apply and apply settings. instructions the the follow on-screen [OK], then “WPS (PUSH button method)” and press or for network” “Search wireless Select [OK]. press and “Wireless” Select Press [OK] to select to Key”. [OK] select “Encryption Press ≥ nameand [OK]. yournetwork Select press OPTION Wireless Settings XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX Select awirelessnetworkforconnection. Wireless Settings Wireless Settings Enter theencryptionkey(password)ofwirelessnetwork. access pointaboutconnectionmethods. Please refertotheoperatinginstructionsofyourwireless Select aconnectionmethod. Network name(SSID) displayed, indisplayed, this manually.case enter control. Stealththe remote be willnotSSID again search bypressing the [R] button on If yournetwork nameis not displayed, Encryption Key OK RETURN WPS (PUSHbuttonmethod) Search forwirelessnetwork RG Search again Set TM ), youcaneasily Reception B Y VQT3X51 15

Getting started SC-BTT190P_eng.book 16 ページ ２０１２年２月２０日 月曜日 午後５時５分

3 Enter your encryption key (password). Reprogramming the Encryption Key (Password) l remote control

Shift a b c d e f g 1 2 3 Delete If you have more than one Panasonic products h i j k l m n 4 5 6 Finish and the remote control operates both products at o p q r s t u 7 8 9 v w x y z . @ * 0 # once, you will need to change the remote control ~ Space / : _ - , ; ‘ “ code to prevent this occurrence. (> 36, “Remote Symbols Alphanumeric Other Characters Control Code”) OK S RETURN

To enter your network name (SSID) manually Firmware updates If your network name (SSID) is not displayed in step 1, follow these steps. Occasionally, Panasonic may release updated 1 To display the network name (SSID) input firmware for this unit that may add or improve the screen: way a feature operates. These updates are Press [HOME] > select “Others” > [OK] > available free of charge. select “Setup” > [OK] > select “Network” > [OK] > select “Network Settings” > [OK] > This unit is capable of checking the firmware select “Wireless Settings” > [OK] > select automatically when connected to the Internet via “Connection Setting” > [OK] > select a broadband connection. “Manual setting” > [OK] When a new firmware version is available, the 2 Press [OK] to select “SSID” and enter your following message is displayed. SSID. New firmware is available. Please update firmware in Setup. Wireless Settings Enter your network name (SSID) to connect. To update the firmware Press [HOME] > select “Others” > [OK] >

SSID select “Setup” > [OK] > select “System” >

Set [OK] > select “Firmware Update” > [OK] > select “Update Now” > [OK]

≥ If your wireless network is encrypted, go to step 2. DO NOT DISCONNECT the unit from the AC power or perform any operation while the update

takes place. ≥ Refer to the operating instructions of the hub or router. ≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates After the firmware is installed, “FINISH” will be settings relating to the connection and security of wireless displayed on the unit’s display. Unit will restart LAN devices. To see whether your wireless router supports and the following screen will be displayed. WPS, check the wireless router operating instructions. ≥ You can perform this setup anytime by selecting “Easy Network Setting” in the Setup menu. (> 34) The firmware was updated. Current Version: x.xx ≥ You can redo these settings individually using “Network

Settings”. (> 34) OK

≥ Do not use this unit to connect to any wireless network for RETURN which you do not have usage rights. During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access. ≥ If downloading on this unit fails or this unit is not ≥ After performing network settings on this unit, the settings connected to the Internet, then you can download the (encryption level, etc.) of the wireless router might change. latest firmware from the following website and burn it When you have trouble getting online on your PC, perform to a CD-R to update the firmware. the network settings on your PC in accordance with the http://panasonic.jp/support/global/cs/ settings of the wireless router. (This site is in English only.) ≥ Please be aware that connecting to a network without To show the firmware version on this unit. encryption may result in the content of the communication (> 36, “Firmware Version Information”) being illegitimately viewed by a third party, or the leaking of ≥ Downloading will require several minutes. It may take data such as personal or secret information. longer or may not work properly depending on the * SSID: connection environment. An SSID (Service Set IDentification) is a name used by ≥ If you do not want to check for the latest firmware version, wireless LAN to identify a particular network. set “Automatic Update Check” to “Off”. (> 36) Transmission is possible if the SSID matches for both devices. 16 VQT3X51 ≥ ≥ ≥ ≥ media removing or Inserting SC-BTT190P_eng.book 17 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 17 SC-BTT190P_eng.book Adaptor DY-WL5Adaptor (optional). LAN Wireless and the Camera Communication the for is panel rear on the port USB The HDD. aUSB or memory USB iPod/iPhone, Use the front USB when port you a connect connected equipment. connected the for instructions the to details, refer displayed on equipment. connected For the cable,connection thebe screenmay setup a USB with product a Panasonic connect If you of the card and pull it straight out. center the press card, SD the removing When up. way right the facing is it that ensure item, a media inserting When (Fordetails > * SD CARD iPod OPEN/CLOSE VOL * 22) 2 1 2 1 speakers EnjoyingTV withunit’s ≥ connected to this unit viatheAUXterminal. connected tothis YouTV is theaudiotypewhen cannotchange ≥ ≥ Press [ audio setting mode. Press and hold [ appropriate external input mode. Press [EXT-IN] several times select to the main the unit.and ( Connect the TV ≥ the audio. (MAIN,SAP) Selecting thetypeofaudio works with with works main unit. the of volume the adjust then and minimum, its to TV on the volume the Reduce “SAP” ( “SAP” Set Set “ PCM-FIX j Secondary Audio Program Audio Secondary AUDIO] several times to select select to times several AUDIO] Dolby Dual Mono. Dual Dolby ” ( AUDIO] to activate the the activate to jAUDIO] > 33) to“Off ”. VQT3X51 ) only ( > > 18) 12) 17

Getting started SC-BTT190P_eng.book 18 ページ ２０１２年２月２０日 月曜日 午後５時５分

HOME menu Videos/Photos/Music Major functions of this unit can be operated from Disc Play back the contents. (> 20) the HOME menu. ≥ When multiple contents are SD Card recorded, select the types Preparation of contents or the title. Turn on the television and select the appropriate USB video input on the television. Sound 1 Press [Í] to turn on the unit. 2 Press [OK] or [3, 4, 2, 1] to select the Select sound quality (equalizer). (> 30) item. ≥ If there are any other items, repeat this iPod step. To enjoy Music (> 22)

HOME Others EXT IN Home theater Network FM Radio Setup (> 31) SD Card Photos Videos Music (> 21) Management

Sound iPod Others Changes the background of Wallpaper OK Personalize HOME menu. 1st user To show the HOME menu Press [HOME]. EXT IN When you want to output audio of an external

device from this unit, select the name of the ≥ Items to be displayed may vary with the media. terminal to which you have connected the device. ≥ When the selector is switched, it may take time to play back the selected video and/or audio. AUX AUX terminal ≥ To save on electricity, the power is turned off automatically HDMI AV OUT (ARC) if there is no button operation for about 30 minutes when ARC not playing back (such as when paused, displaying the terminal menu, displaying still pictures, etc.). (Compatible with DIGITAL IN DIGITAL AUDIO IN terminal ENERGY STAR) If audio output from a TV or STB is selected, “(TV)” or “(CABLE/SATELLITE)” is displayed. (> 33)

Network Network Displays the Home screen of Service VIERA Connect. (> 26) Home DLNA Client (> 27) Network Media Renderer (> 27)

FM Radio

To enjoy the FM radio (> 25)

18 VQT3X51 B A 3 2 1 ≥ ≥ ≥ The following settings canbe personalized. settings. Up 4 to people canusethe unit with their own easily.switching ofmultiple settings enables that a function is Mode User Multi Multi UserMode SC-BTT190P_eng.book 19 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 19 SC-BTT190P_eng.book Select Icon Select Nickname Input B A The The audio and settings ( picture The wallpaper of Home menu icon user The Personalizing a new user users with colored buttons. colored with users Personalize new userandswitch a the selected currently icon and name user The The The following canbe items set. to indications. according the settings the change and item an Select user personalization. new indicates that button a colored Press Press [HOME]. Home theater HOME OK USER1 USER1 Create fromPhotos preparedillustrations. from imagecanbe The selected illustrations from Select a usericon. Personalize a username. Personalize ≥ photo. your personalize and can shoot you connected, is camera Communication the If Sound Photos EXT IN Personalization”) icon. ( an as media in recording photo Youa select also can 2nd user Personalize Network Videos iPod > FM Radio > Others Music 8 31) 28, 28, “Icon “Icon 28, (> menu. Setup from Information” User “Edit Select To the change user personalized information 4 ≥ ≥ be selected. automatically will smartphone the who the user registered smartphone, When the unit turnedis on using the registered ∫ 4 3 2 1 ∫ switch to the user corresponding to the button. thePress colored buttons inthe Home menu to ∫ Smartphone Personalize Wallpaper Select Perform the “Remote Device Settings”. ( Device “Remote Settings”. Perform the (This site is in English only.)(This siteisinEnglish http://panasonic.jp/support/global/cs/ the followingwebsite. dedicated softwareisrequired.Formoredetails,referto To asaremotecontrol,installationof usesmartphones 36) Switching the user the Switching Using registered smartphones Using registered Using facial recognition buttons Using colored Select “Confirm” and press [OK]. press and “Confirm” Select ≥ Press [OK]. and displaysthe results. pictures of face the from face closest the determines camera The Camera. Turn Communication to face the [OK]. and press Recognition” “Facial Select menu. Home the in [OPTION] Press Camera (Only when Communication connected to To redo the facial recognition, press [RETURN]. > 26) ≥ each user. to respect with registered remote canbe control usedasa Smartphone ≥ the Homemenu. ofPersonalize a background smartphone. one for registered Multiple be users cannot (> wallpaper.as an media select in a photo recording also can wallpapers, you Other than prepared the personalized users users personalized the 8 “Wallpaper”) 28, VQT3X51 > 34) 19

Getting started SC-BTT190P_eng.book 20 ページ ２０１２年２月２０日 月曜日 午後５時５分

Playback Playback Frame-by-frame 1 Insert the media. While paused, press [2] (2;) or [1] (;1). Playback starts depending on the media. ≥ Press and hold to change in succession forward 2 Select the item to play and press [OK]. or backward. Repeat this procedure if necessary. ≥ Press [1PLAY] to revert to normal playback speed. ≥ BD-Video and AVCHD: [1] (;1) only. ≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫STOP] when you have finished playback to protect the unit’s motor, your television screen and so on. Changing audio ≥ MKV: Successive play is not possible. ≥ It is not possible to play back AVCHD and MPEG2 video Press and hold [jAUDIO] to activate the audio which have been dragged and dropped, copied and pasted to the media. setting mode. You can change the audio channel number or soundtrack language, etc. Operations during playback Displaying menus and Following functions may not work depending on playback information the media and contents. Stop Show top menu/pop-up menu Press [∫STOP]. The stopped position is memorized. Press [POP-UP MENU/TOP MENU]. Select the item and press [OK]. Resume play function ≥ Press [1PLAY] to restart from this position. ≥ The position is cleared if the tray is opened or Show the status messages you press [∫STOP] several times to display “STOP” on the unit’s display. While playing, press [STATUS]. ≥ On BD-Video discs including BD-J, the The status messages give you information about resume play function does not work. what is currently being played. Each time you press [STATUS], the display information may change or will disappear from the screen. Pause ≥ Depending on media and contents, the display may change or may not appear. Press [;PAUSE]. ≥ Press [;PAUSE] again or [1PLAY] to restart play. e.g., BD-Video A B

BD-Video Search/Slow-motion T1 C1 0:05.14 Play 0:20.52 Search While playing, press [SEARCH6] or C D [SEARCH5]. A T: Title, C: Chapter, PL: Playlist ≥ Music and MP3: The speed is fixed to a single step. B Elapsed time in the title Slow-motion C Current position While paused, press [SEARCH6] or D Total time [SEARCH5]. e.g., JPEG ≥ BD-Video and AVCHD: [SEARCH5] only. 1 / 26 Date 11/12/2007 The speed increases up to 5 steps. Size 500 x 375 Manufacturer ≥ Press [1PLAY] to revert to normal playback speed. Equipment Skip While playing or paused, press [:] or [9]. Skip to the title, chapter or track. 20 VQT3X51 ≥ ≥ ≥ ≥ ≥ and press SDCard” [OK]. Erase” or “Format menu ( Home the in Management” Card “SDSelect ∫ 3 2 1 connection. Internet with along is necessary card an SD of insertion function, BD-Live this For contents that useInternet access. bonus enjoy can you discs, “BD-Live” With ≥ ≥ ≥ Cable. ( High Speed a unit using HDMI this of terminal Connect compatible3D to TV an AVHDMI OUT Preparation SC-BTT190P_eng.book 21 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 21 SC-BTT190P_eng.book 3D Settings ( 3D Settings screen. on the Play back displayed following the instructions preparations for the TV.the Perform necessary switch the view of playback contents. playback of view the switch “2D”If and “3D” indications arenot displayed, press[R] to from the “3D” list. (Still pictures in “2D” are played backin2D.) select screen, “Photos” from photos 3D back playing When your eyes. rest and use discontinue images, 3D viewing while discomfort or nausea, other dizziness, you In theevent that experience certain discs( needtobechangedfor “BD-Live InternetAccess”may and/or visittheirwebsite. totheinstructionsondisc with eachdisc,pleaserefer theoperatingmethodmayvary The usablefunctionsand ( Resolution” and“24pOutput”. assettingsof“HDMI 3D imagesmaynotoutput fatigue. well orareexperiencingvisual 3Dimagesifyoudonotfeel Please refrainfromviewing cards Deleting data/Formatting SD Insert the Insert the disc. ≥ space. free or more GB 1 with SDcard an Insert ( and settings. connection network Perform Enjoying BD-Live photos Enjoying 3D video and > The SD card is used as the local storage. local the as used is card SD The > > 4 15) 14, 18), then select “BD-Video Data 12) > > 35). 1 33) 31, > 32) 3 2 1 settings duringthe playback. Play aslideshow of photos and make various ≥ ≥ Interval Display Slideshow Start Soundtrack Random Folder Soundtrack Soundtrack Play Repeat Effect Transition has priority to played back as background music. background as back played to priority has iPod/iPhone unit, this to inserted/connected are iPod/iPhone When a music CD, aUSB device with music recorded, and an Still pictures displayed as “ ” cannot beplayedback cannot ” with thisunit. Still displayed as “ pictures The The following canbe items set. an and pressSelect item [G]. Select “Photos”. Insert the media. Slideshow Change the display interval. Change the a constantinterval. at one one by folder selected the Youin stillpictures display can Start the slideshow. random order. music is playedinBackground played. are files music the from which folder the Select ≥ ≥ music. play background to whether Set slideshow. the repeat to whether Set pictures. effectwhensliding the Select depending on the case. the depending on source the as selected be cannot media Some and iPod/iPhone. MusicCD from device, USB You soundtrack the can select VQT3X51 21

Playback SC-BTT190P_eng.book 22 ページ ２０１２年２月２０日 月曜日 午後５時５分

Using the iPod/iPhone iPod/iPhone Playback Compatible iPod/iPhone (as of December 2011) ≥ Update your iPod/iPhone with the latest 1 Press [HOME]. software before using this unit. Select “iPod” and press [OK]. ≥ Compatibility depends on the software version 2 of your iPod/iPhone. 3 Select the item to play. ≥ iPod/iPhone compatibility assures music ≥ Repeat this procedure if necessary. playback and battery charge functions of this unit as a home theater system. Album artwork iPod touch: 1st, 2nd, 3rd, and 4th generation iPod Good morning iPod nano: Ronaldo Happy days 1st, 2nd, 3rd, 4th, 5th, and 6th generation 1:00 -2:30 45 of 1230 iPod classic

iPod: 5th generation

iPhone 4S/ iPhone 4 / iPhone 3GS / iPhone 3G/ ≥ If album artwork is not contained in the iPhone data, “ ” will appear on TV. ≥ Depending on the software version of your iPod/iPhone, the album artwork may not ≥ In some locations, reception status of an iPhone may be appear properly. poor when it is loaded on this unit. ≥ Some operations may not work while ≥ When the iPhone receives a call while connected to this unit, playback, etc. of the iPhone may stop. reading the album artwork. To prioritize the operation with the iPhone connected to this unit, make the setting so that the iPhone does not receive calls. ≥ The setting of the playback mode will be kept until changes ≥ Avoid using Wi-Fi mode on your iPhone while the network are made on the same iPod/iPhone. functions on this unit are in use wirelessly. Surround sound effect and sound mode are available. About recharging the battery ≥ ≥ iPod/iPhone will not be recharged after the battery charge completion. ≥ iPod/iPhone will start recharging when this unit is on.

iPod/iPhone Connection Preparation ≥ Turn the main unit off or reduce the volume of the main unit to its minimum. 1 Connect the iPod/iPhone. To purchase a Dock Connector to USB Cable, consult your iPod/iPhone dealer. iPod/iPhone (not supplied)

Dock Connector to USB Cable (not supplied)

22 VQT3X51 ≥ is screen display the uses that action an When – starts unit on the play When – on. automatically turn willis off, television the television the When will be displayed. automatically switched and theof screen this unit input channelof the television will be the performed, are operations following the When 3 2 1 Preparation “HDAVI Control Link VIERA TV & Radio SC-BTT190P_eng.book 23 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 23 SC-BTT190P_eng.book VIERA Link equipment for operational details.operational for equipment for connected instructions operating the See cable. HDMI an with equipment the You can use this function by connecting (VIERA) under“HDAVI Control”. operationsof this unitPanasonic and a TV convenient function whichwill link the VIERA Link “HDAVI Control” is a iPhone selector is chosen. is iPhone selector ( chosen. iPod/ the when work not does function This menu) Home (e.g., performed What is VIERA Link “HDAVI Control”? Link VIERA is What changed, repeat this procedure. this repeat changed, the Also when or connection are settings properly. works function Control” on TV connected the so that the “HDAVI unit’schannel this inputselect and equipment Turn onall “HDAVI Control” compatible equipment connected TV). (e.g., “HDAVI the theSet on operations Control” (The default setting is “On”.) Set “VIERA Link”to “On” ( Power onlink Automatic input switching TM is a new name for EZ Sync TM > > 22) TM 35). ” TM . Select “Video”Select in that (VIERA) supports HDAVI Control 2or later. TV Panasonic a to connected unit is the When television the to power off after even continuously turning music Playing when youswitch the off.television off turns unit, automatically this including Control”, All compatibleequipment connected with “HDAVI ≥ ≥ ≥ ≥ ≥ details. See the operating of instructions the for TV more settings. and operations playback various control, youcanperform By using the remote TV later Onlysupports when TV “HDAVI Control or 2” equipment supporting VIERALinkfunction. equipment supporting Please refertoindividualmanualsforothermanufacturers’ that supportsHDMICECcannotbeguaranteed. such, itswithothermanufacturers’equipment operation As wehavedevelopedandadded. unique functionthat known asHDMI CEC (ConsumerElectronicsControl),isa HDMIwhichisanindustrystandard functions providedby VIERA Link“HDAVI basedonthecontrol Control”, Panasonic’s HDAVI conventional equipment. compatibleis Thisstandard equipment. with November, 2011) Panasonic’s for HDAVI Control “HDAVI asof neweststandard Control5”isthe (current This unitsupports“HDAVI Control5”function. press certainbuttonsontheTVremotecontrol. you unitmaybeinterruptedwhen The operationofthis the TV. TV.on the for operating instructions details, tothe Forrefer you canuseforthisunitvarydepending The buttonsthat VIERA remote control with only control Easy link Off Power “Power Off “Power link” ( link” > 35) VQT3X51 23

TV & Radio Playback SC-BTT190P_eng.book 24 ページ ２０１２年２月２０日 月曜日 午後５時５分

Enjoying TV and STB with Select the STB audio unit’s speakers When the STB power is turned on, this unit and You can select whether audio is output from the the TV will automatically turn on. The video is unit’s speakers or the TV speakers by using the output from the TV, and the audio is output from TV menu settings. Switch the audio output setting the speakers of this unit. of the TV to this unit’s speakers. Connecting the optical digital audio cable Select the TV audio ≥ When this unit and the STB are connected by an optical digital audio cable, the settings below When the TV is turned on, this unit will also are required to enable output of audio from the automatically turn on. speakers of this unit.

e.g., OPTICAL OUT e.g., HDMI cable (not supplied) Optical digital audio cable (not supplied) Optical digital audio cable (not supplied) Set Top Box, etc.

1 Press [HOME]. 2 Press [3, 4, 2, 1] to select “Others” and press [OK]. 1 Press [EXT-IN] to select “D-IN”. 3 Press [2, 1] to select “Setup” and press [OK]. 2 Press [STATUS] to select “CABLE/ 4 Press [3, 4] to select “Audio” and press [OK]. SATELLITE AUDIO ON”. 5 Press [3, 4] to select “TV Audio Input” and Set to “CABLE/SATELLITE AUDIO OFF” when press [OK]. this unit and the STB are not connected by an 6 Press [3, 4] to switch “AUX”, “ARC” or optical digital audio cable. “DIGITAL IN” and press [OK]. ≥ Select an audio input terminal connected to the unit.

≥ For details, refer to the operating instructions of the TV.

24 VQT3X51 2 1 3 2 1 (> connected. is antenna FM the that sure Make Preparation You canpreset up to 30channels. Listening tothe Radio SC-BTT190P_eng.book 25 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 25 SC-BTT190P_eng.book 13) Alternatively, press [ e.g., 1: [1] e.g., 1: To select a 1-digit number channel. the select to buttons number the Press Press [RADIO] select to “FM”. order. ascending in channels the into receive can stations it startsall the preset tuner to The displayed. Release the button when “AUTO” is Press and hold [OK]. To changethe frequency, refer to “Manual * frequency.* To current the with preset begin auto CURRENT: (FM87.9). frequency To lowest the with preset begin auto LOWEST: or“CURRENT”. “LOWEST” Press and hold [STATUS] to select Press [RADIO] select to “FM”. e.g., 12: [1] e.g., 12: To select a 2-digit number channel Listening to a preset automatically Presetting stations tuning andpresetting”. B B [OK]. [2]. W , X] or[3, 4 ]. ≥ ≥ 4 3 To preset channel the ≥ 2 1 a Select radio broadcast. ∫ (Some settings are also indicatedontheTVscreen.) (Some settingsarealso display.be shownontheunit's The radiosettingswill inthesamechannelpreset. station isstored storedisoverwrittenwhenanother A station previously stops astation when isfound. frequencystarts[SEARCH5] untilthe scrolling.Tuning To tuning,pressandhold[SEARCH start automatic Manual tuning andpresetting Press the number buttons to select the channel. the select to buttons number the Press “P” While onthe flashing display is Press [OK]. Press broadcast radio the to listening While theselect frequency. [SEARCH Press Press[RADIO] to select “FM”. 6 ] or [SEARCH] or VQT3X51 5 ] to 6], 25

Advanced Reference operations TV & Radio SC-BTT190P_eng.book 26 ページ ２０１２年２月２０日 月曜日 午後５時５分

Advanced operations Enjoying Network 1 Press [INTERNET]. ≥ The video communication service can be Service accessed directly by pressing [ ] button, (NETFLIX, etc.) and NETFLIX can be accessed directly by You can access information services from the pressing [NETFLIX] button. VIERA Connect Home screen via the Internet. 2 Select the item and press [OK].

To exit from VIERA Connect VIERA Connect provides a variety of Press [EXIT], [HOME] or [POP-UP MENU/TOP selected Internet services such as MENU]. the followings. ≥ Online movie rental service ≥ Video communication service ≥ When playing content in the media, VIERA Connect cannot ≥ Video browsing service be accessed by pressing [INTERNET]. ≥ In the following cases, settings are possible using the Setup menu items. – When restricting the use of VIERA Connect (> 35, “Network Service Lock”)

XXXXX * – When the audio is distorted X XXXXXXXX (> 34, “Audio Auto Gain Control”)

XXXXXX – When wrong time is displayed XXXXX XXXXXXXXXXXXXXXXXXXX (> 34, “Time Zone”, “DST”) Featured Videos MORE ≥ If using slow Internet connection, the video may not be XXXXXXXXXXX BACK New York, NY XXXX 39°F XXXX displayed correctly. A high-speed Internet service with a Mostly Cloudy Market speed of at least 6 Mbps is recommended. ≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the VIERA Connect function. (> 16) ≥ VIERA Connect Home screen is subject to change without notice. Internet ≥ The services through VIERA Connect are operated by their * Images are for illustration purposes, contents may change respective service providers, and service may be without notice. discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the Preparation content or the continuity of the services. ≥ Network connection (> 14) ≥ All features of websites or content of the service may not ≥ Network setting (> 15) be available. ≥ Some content may be inappropriate for some viewers. To enjoy video communication (ex. SkypeTM) : ≥ Some content may only be available for specific countries and may be presented in specific languages. ≥ Connect this unit with optional Communication Camera (TY-CC20W or TY-CC10W). Depending on your location, this optional camera may not be available. Please consult your local Panasonic dealer for advice.

Communication Camera TY-CC20W or TY-CC10W

≥ When this unit is connected by wireless LAN connection, connect the Communication Camera via the USB port on the front of this unit. ≥ For operating method refer to the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.)

26 VQT3X51 MENU]. MENU/TOP [POP-UP or [HOME] [EXIT], Press To exit Home from Network 6 5 4 3 2 1 1 Preparation with this home theater. contents the enjoy and network, home your to 7 Windows installed, etc.) connected smartphone, the DLNA withCertified mediaserver (PC You in stored andmusic photos, videos share can featureHome Network 3 2 SC-BTT190P_eng.book 27 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 27 SC-BTT190P_eng.book ≥ etc. smartphone, ≥ ≥ the to Select item play and press [OK]. and press [OK]. the Select equipment ≥ Select “DLNA Client”. Network”. “Home Select “Network”. Select Press [HOME]. Perform network connection (> connection network Perform the Media Windows libraries of the to and folder contents the Add equipment. connected Network of thesettings Perform Home settings ( network the DLNA server on back contents Playing [RETURN] to hide the Control Panel. the tohide [RETURN] Panel is displayed, not and press Control the if starts. [OK] playback Press Playlist of Windows Media Windows of Playlist Control Panel Panel Control [OPTION]. pressing functions depending on content by the You convenient use able to be may control. remote the on [R] pressing by updated be can list The libraries. inthe onlythe stored contentsback that are Home Theater ( > > ® 29) is displayedoncethe 15) of this unit. this of 15) Player or the or the Player ® Player can play can Player 14) and 14) Server Possible applications: Possible on (this DLNAserver the unit). from Renderer toMedia Controller playbackcontents (DMC) You etc. canusethe as smartphone, Digitalthe Press [HOME]. Press To screen Renderer Media from exit ≥ ≥ ≥ 5 4 3 2 1 4 Perform steps 1 Preparation DMCcompatible software shouldbeinstalled. * (This site is in English only.) in English is site (This http://panasonic.jp/support/global/cs/ equipment. the of each for instructions operating the For more details, refer to the following website and when controlled using DMC. when controlledusing This unit can beplayedback via connectedequipmentonly back bythisunit. onthedisplaycannotbeplayed Items displayedingray possible. playback maynotbe contentsequipment, Depending onthe andconnected Operate DMCcompatibleOperate the devices. “Media Renderer”. Select Select “Home Network”. Select “Network”. Press [HOME]. ≥ ( Device “Remote Settings”. Perform the Controller Media Digital the Using Renderer Renderer You up canregister to 16 devices. to 3. ( > left) Controller Controller VQT3X51 Server Server + * > 34) * * 27

Advanced operations SC-BTT190P_eng.book 28 ページ ２０１２年２月２０日 月曜日 午後５時５分

Option menu ∫ Repeat Play (Only when the elapsed time is being displayed A variety of playback operations and settings can on the unit’s display.) be performed from this menu. Select the item that you want to repeat. Available options differ depending on the playing ≥ The items displayed differ depending on the contents and the condition of the unit. type of media. ≥ Select “Off” to cancel. About Multi User Mode : Settings of the items with this indication are ∫ Shuffle saved by the respective users registered in the Select whether or not to play random. Home menu. Please refer to page 19 for details about user ∫ Start Slideshow registration and switching. Start the slideshow. 1 Press [OPTION]. ∫ Status e.g., BD-Video Show the status messages.

Operation Menu Rotate Right Soundtrack 1 ENG DTS-HD MSTR Multi ∫ Subtitle ∫ Rotate Left Angle 1 Repeat Play Off Rotate the still picture. Status

Secondary Video Playback Information Window Wallpaper Control Panel ∫ Top Menu Set the still picture to the wallpaper of HOME Pop-up Menu menu. (> 18)

∫ Icon Personalization 2 Select an item and change the settings. Set the still picture as your user icon. (> 19) To exit the screen Video Press [OPTION]. ∫ The recording method of original video appears.

Regarding Language: (> 46) ∫ Secondary Video Operation Menu Select on/off of images. The recording method of original video appears. ∫ Soundtrack Video ≥ During search/slow-motion or Show or change the soundtrack. frame-by-frame, only the primary video is displayed. ∫ Audio channel Select on/off of audio and the Soundtrack Select the audio channel number. language.

∫ Subtitle Change the subtitle settings.

∫ Angle Select the number of the angle.

28 VQT3X51 (> Settings” and “Audio Settings” “Video to Refer of this unit this from category. Youfeatures enjoyspecial to settings access can Display Menu. ∫ Menu. Display Pop-up ∫ Display Top Menu. ∫ to [RETURN] hide Press the Panel. Control Playing backwhile Link, etc. using VIERA Display the Control Panel. ∫ Press [RETURN] to exit. Displays the following. ∫ SC-BTT190P_eng.book 29 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 29 SC-BTT190P_eng.book e.g., *&/+ Menu Pop-up Menu Top Menu Control Panel Window Information Playback 30) for more details on each setting item. setting detailson each more for 30) Personal Preference HDMI outputHDMI information. Settings status of “Digital Audio Output” ( disc. of information attribute Audio/video EXIT > 32). ≥ ≥ Specific canbeperformed. quality settings picture ∫ Return video settings to the factory preset. factory the to settings video Return ∫ theSwitch screen mode. ∫ ≥ DVD-Video 24p at are output at 24p. on recorded material other and Movies ∫ ≥ output to suit the oftype material being played. the progressive Select method conversion for of ∫ AVfrom HDMI 1080p OUT. sharp anddetailed images whenoutput as 1080i/ to corrected are quality image normal of Pictures ∫ detailed. and is sharp picture The ∫ quality. picture rich with picture high-resolution a produces signals chroma HDMI of processing high-resolution The ∫ ≥ play. during mode quality picture the Select ∫ appears around contrasting sections of the picture. the of sections contrasting around appears that smudging the reduces and noise block Smoothes NR Integrated Only when you have selected “On” in “24p Output” ( may not operate. ( operate. not may function this “On”, to set is Output” “24p When give a feelinggreater of depth. to background the in rough noise the Reduces 3D NR: settings to “Video”. “Auto” settings from the change is distorted content the When “Picture Adjustment”. Adjustment”. “Picture If you canchangesettings in “User”, you select Picture Adjustment Picture Adjustment Reset to Default Video Settings Video Default Reset to Aspect Screen 24p Progressive Resolution Super Detail Clarity Chroma Process Picture Mode Video Settings : > 32) VQT3X51 > 32). 29

Advanced operations SC-BTT190P_eng.book 30 ページ ２０１２年２月２０日 月曜日 午後５時５分

Digital Tube Sound: Audio Settings This feature gives you warm sound, like that produced by a vacuum tube amplifier. “Surround Effects” and “Sound Effects” can also Recommended settings: be set by using the [SURROUND] and [SOUND] ( Digital Tube on the remote control. > 37) A crisp, delicate sound Sound 1 ∫ Surround Effects ¾BD/DVD (Multi-ch Source): Digital Tube A tight, hi-fi sound Sound 2 Expand the sound field forward, backward, upward, Digital Tube A soft, rich sound 3D Cinema right and leftward providing Sound 3 Surround a sound with depth and Digital Tube A clear, powerful sound force that better Sound 4 matches 3D images. Digital Tube A distinctive mid-range You can enjoy 6.1/7.1-channel 7.1ch Virtual Sound 5 sound surround-like effect using Surround Digital Tube 5.1-channel speakers. A soft, enveloping sound Sound 6 You can play any source in stereo. Sound will be output 2ch Stereo to the front speakers and ¾All: the subwoofer only. You can select sound quality Equalizer settings. ¾TV/CD/iPod (2ch Source): Flat/Heavy/Clear/Soft You can enjoy sound from the You can adjust the amount Multi front speakers, as well as the of bass. Channel Out surround speakers even when Level 1 (Weakest effect) to Subwoofer playing stereo sources. Level 4 (Strongest effect) Super You can enjoy sound from all ≥ Levels can be set by Surround speakers with stereo sources. source. Dolby Pro Suitable for movie software, or the You can enhance low-frequency Logic II Movie one recorded in Dolby Surround. sound so that heavy bass sound H.Bass can be heard clearly, even if the Dolby Pro Adds 5.1-channel effects to acoustics of your room are not Logic II Music stereo sources. optimal. You can enhance the ∫ Sound Effects*1,2,3 Whisper-Mode surround effect for low ¾TV/CD/iPod (2ch Source): Surround volume sound. (Convenient Re-master: for late night viewing.) This feature gives you brighter sound by You can make the Center increasing the high frequency portion of the Center channel sound seem like it is audio. (Discs recorded at 48 kHz or less) Focus coming from within the TV. Recommended settings: Re-master 1 Pop and rock ∫ High Clarity Sound Plus Re-master 2 Jazz When playing back music contents, it improves Re-master 3 Classical the sound quality by stopping the video output.

*1 Not every function can be set individually. *2 When audio is output from the HDMI AV OUT terminal this function is effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set to “PCM”. (> 32) *3 This function has no effect when the type of audio is Dolby Pro Logic II.

30 VQT3X51 screen etc. can be adjusted during 3D playback. during adjusted be can etc. screen 3D for position the Option menuor message Type”( “3D in selected is HD” “Full when (Only ∫ ∫ ∫ ∫ SC-BTT190P_eng.book 31 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 31 SC-BTT190P_eng.book Frame Color Frame WidthFrame TypeScreen Distance Manual Soft Normal 3D 2D to Side by side Original Pop-Out Level Level Pop-Out Manual Settings Mode Picture 3D Signal Format 3D Settings edge of screen. of edge thefeathering at ofthe color Set screen. edge of the the Set ofamount feathering at during 3D playback (flat or round). appears screen how the Selects perception. depth of amount the Set of settings with 3D back pictures Play the depth back perception. holding broadness, of feeling You a with canenjoy3Dpictures effects. 3D with backpictures normal Play effect. 3D to pictures 2D Converts left andright screens. of format comprising picture 3D originalpicture format. Keep “Manual Settings” “Manual > . 33).) ∫ [HOME]. Press To exit screen the 1 registration andswitching. user about details for pageto 19 refer Please menu. Home the in registered users respective the by saved User Multi About Mode with both menus. the You Option menu. thecan get same effect to common are menu Setup inthe items Some to standby. settings remain intact evenif youswitch unitthe Change the unit’s settings if necessary. The Setup menu Press [OK] to [OK] showthe following settings:Press ∫ ∫ ∫ ∫ ∫ 4 3 2 Picture Mode HDMI Output Resolution Super Detail Clarity Chroma Process Picture Adjustment : Settings of the items with this indication are are indication this with items the of Settings : Press [HOME]. Select an an and change Select item settings. the [OK]. Press [ [OK]. press Press [ Video Setup 3D System Ratings Network Language Video Audio 3 2 OK RETURN , , 4, 1 ] to select “Setup” and press press and “Setup” select ] to HDMI Output Seamless Play Still Mode(pausedvideo) Super Resolution Detail Clarity Chroma Process Picture Adjustment Picture Mode 2

(> , (>

1 29) ] to select “Others” and “Others” select ] to

29) (> ( >

(> 29) 29) 29) VQT3X51 Advanced Normal Auto On 1 0 31

Advanced operations SC-BTT190P_eng.book 32 ページ ２０１２年２月２０日 月曜日 午後５時５分

¾HDMI Resolution ∫ Still Mode (paused video) The items supported by the connected devices are Select the type of picture shown when you pause indicated on the screen as “¢”. When any item playback. without “¢” is selected, the images may be distorted. Automatically selects the type of ≥ If “Auto” is selected, the best suited output Auto resolution to the connected television is picture shown. automatically selected. Select if jittering occurs when “Auto” is Field ≥ To enjoy high-definition video up-converted to selected. 1080p, you need to connect the unit directly Select if small text or fine patterns cannot to 1080p compatible HDTV (High Definition Frame be seen clearly when “Auto” is selected. Television). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible. ∫ Seamless Play The chapter segments in playlists are played ¾24p Output seamlessly. When this unit is connected to a TV supporting 1080/ ≥ Select “On”, when the picture freezes for a 24p output using an HDMI cable, movies and other moment at the chapters segment in playlists. material recorded at 24p are output at 24p. ≥ When playing DVD-Video, set to “On” and then set “24p” in “Video Settings” (> 29) to “On”. ≥ When BD-Video images other than 24p are Audio played, images are output at 60p. ∫ Surround Effects (> 30) ≥ 24p: A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/ ∫ Sound Effects (> 30) second in accordance with the film materials. ∫ Dynamic Range Compression ¾HDMI Color Mode You can listen at low volumes but still hear dialog This setting is for selecting color-space clearly. conversion of the image signal when the unit is (Dolby Digital, Dolby Digital Plus and Dolby connected using an HDMI cable. TrueHD only) ≥ “Auto” is effective only when playing Dolby TrueHD. ¾Deep Color Output This setting is for selecting whether to use Deep ∫ Digital Audio Output Color output when a television that supports Press [OK] to show the following settings: Deep Color is connected. ¾Dolby D/Dolby D +/Dolby TrueHD ¾Contents Type Flag ¾DTS/DTS-HD Depending on the playback content, the TV will Select the audio signal to output. output adjusting to the optimal method when a ≥ Select “PCM”, when the connected equipment TV that supports this function is connected. cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment. ≥ Not making the proper settings may result in noise.

¾BD-Video Secondary Audio Select whether or not to mix the primary and secondary audio (including the button click sound). If “Off” is selected, the unit outputs the primary audio only.

32 VQT3X51 Refer to page36. to Refer ∫ output.theofadjusting audioby delay time the Synchronization between pictureis andsound corrected ∫ ≥ ≥ ≥ sound. 2-channel of multi-channel Select downmixsystem to the ∫ Link operations. Select TV the audio input to work with the VIERA ∫ [OK] showtheto followingPress settings: ∫ SC-BTT190P_eng.book 33 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 33 SC-BTT190P_eng.book ≥ HDMI. audio from output to not or whether selects setting This ¾ Select “On” if the sound is cut offintermittently.cut is sound the if “On” Select ≥ ≥ toconnected this unit. Selects the audiooutput from the devices ¾ – Playback of secondary audio of(including secondary the Playback – TrueHD Dolby playback – AVCHD playback – following cases: in “Stereo”willbe output the audio The in audio signal. There is nodownmixeffect on the bitstream sound. surround enjoy the to encoded” “Surround Select Speaker Audio Delay Downmix TV Audio Input Digital Audio Input “Off”: DTS, PCM and Dolby Digital are available. are Digital Dolby PCM and DTS, “Off”: speakers when “Off” is selected. when “Off”is speakers Audio will be theoutput through system's HDMI Audio Output “On”: PCM is available. PCM “On”: PCM-FIX button clicksound). video software. theSelect playback ofmethod 3Dcompatible ∫ when playing back the 3D compatible video software. video 3D compatible the back playing when screen warning 3Dviewing the hide or display to Set ∫ ≥ TV. connected the of format the Select ∫ theSelect output of method 3D AVCHD videos. ∫ ≥ ≥ subtitle. the for language the Choose ∫ ≥ ≥ Choose the language for audio. ∫ ∫ ∫ ¢¢¢¢ ¢¢¢¢ “Checker board”or“Sideby “Checker side” is selected. Change the settings for 3D on the TV also when Enter a code ( a code Enter available on that disc. of that language will appearif automatically subtitles available, not is Language” “Audio for selectedlanguage and the selected is If “Auto” ( a code Enter each disc will beselected. isIf selected, “Original” the original languageof 3D BD-Video Playback 3D Playback Precautions 3D Playback 3D Type 3D AVCHDOutput Subtitle Language Audio Language Level Pop-Out Settings Manual 3D Language ”. ”. > > 46) when you select “Other “Other select when you 46) “Other select when you 46)

( >

(> 31) 31) VQT3X51 33

Advanced operations SC-BTT190P_eng.book 34 ページ ２０１２年２月２０日 月曜日 午後５時５分

∫ Menu Language ¾Network Service Settings (> 26) Choose the language for the disc menus. (VIERA Connect) ≥ Enter a code (> 46) when you select “Other Press [OK] to show the following settings: ¢¢¢¢”. Audio Auto Gain Control ∫ Subtitle Text Volume that is different depending on the contents Select a suitable item according to the language is adjusted automatically to the standard volume used for MKV subtitles text. while using the VIERA Connect. ≥ Depending on contents, this function effect ≥ This item is displayed only after playing back a file. will not work. Select “Off” when the audio is warped. ∫ On-screen Language ≥ Choose the language for menus and on-screen Time Zone messages. By selecting the time zone, it is possible to set the unit’s time to match your location. ≥ Some VIERA Connect contents require the time Network zone to be set. Set the time zone if necessary.

∫ Easy Network Setting (> 15) DST Select “On” when using Daylight Saving time. ∫ Network Settings Perform network-related settings individually. ¾Network Drive Connection Press [OK] to show the following settings: It is possible to access the shared folder of equipment not compatible with DLNA, such as ¾LAN Connection Mode the Windows XP operating system, and play Select the LAN connection method. back video, still pictures, and music on this unit. For the setting and operation method of connected ¾Wireless Settings equipment, refer to the following Website. This allows the wireless router and connection http://panasonic.jp/support/global/cs/ settings to be set. Current connection settings (This site is in English only.) and connection state can be checked. ¾Remote Device Settings (> 27) Connection Setting Press [OK] to show the following settings: The wireless router connection wizard will be displayed. Remote Device Operation Double Speed Mode Setting (2.4GHz) Enable to operate by DMC. When a 2.4 GHz wireless format is used, this ≥ If “On” is selected, “Quick Start” is fixed to “On”. sets the connection speed. ≥ If you connect using the “Double Speed Mode Setting Unit Name (40MHz)”, 2 channels use the same frequency Set the name of this unit to be displayed on band, and there is consequently a greater risk of the connected equipment. reception interference. This can cause the ≥ [BTT196] [BTT195] : With the default setting, connection speed to drop or become unstable. the unit name will be displayed as “SC-BTT195”. ¾IP Address/DNS Settings This is for checking the state of the network connection and setting the IP address and DNS-related. Press [OK] to show the respective setting.

¾Proxy Server Settings This is for checking the state of connection with the Proxy server and performing settings. Press [OK] to show the respective setting.

34 VQT3X51 Press [OK] [OK] showtheto followingPress settings: ∫ You settings. canexecute basic ∫ Connect. You VIERA of usage the restrict can ∫ Set an agelimit BD-Video of play. ∫ Set a ratings tolevel limit DVD-Video play. ∫ Don’t forget yourpassword. The following use items samepassword. the SC-BTT190P_eng.book 35 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 35 SC-BTT190P_eng.book ≥ functions areused. You access BD-Live when canrestrict Internet ¾ Display Settings Display Setting Easy Service Lock Network Ratings BD-Video DVD-Video Ratings which havecontent ow BD-Live contents onlyfor ispermitted access selected,Internet is If (Limited)” “Allow Registration Type in “Registration Type”in “Registration is selected. “Manual” when performed be can equipment displayed the of Registering/deregistering List Device Remote BD-Live BD-Live Internet Access( System Ratings Manual Auto accessing this unit. this accessing individually for the equipment that is connection the of permission the Set unit. this accessing is that equipment Allow connection to all the ner certificates. > 21) television and playing ratio4:3 image: widescreen a 16:9 to connected When playing 16:9 ratio image: and television aspect a 4:3 to connected When connected. television of type the match to Set ¾ ≥ supports “HDAVI Control”. that device a to cable HDMI via connected use “HDAVI to Set when function Control” ¾ automatically. to whether Choose showstatus messages ¾ ≥ ≥ screen. on the burn-in prevent to is This ¾ Letterbox 4:3 4:3 16:9 Link “HDAVI Control” compatible equipment.) compatible “HDAVIControl” Link VIERA ofthe connected on the settings depending for VIERA Link operation ( operation Link VIERA for unit this of setting link off power desired the Select link Power Off HOMEautomatically. to menuswitches screen the or more, minutes 10 for nooperation is there and displayed is content playback of list a If TV Aspect “HDAVI Control”. “Off”Select you donotwhen want to use Link VIERA Status Messages is not available. function etc., this and pausing, playing While “On”: to is set this When SaverFunction Screen unit will not turn off automatically. playing When back onlycontent, audio the Video: off automatically. theWhen TV is turned off, unitthis will turn Video/Audio: of the picture. at the top and bottom Black bands appear Letterbox”. “4:3 as output is video BD-Video, playing When screen. the fills picture the so off cut are sides The screen. the of center in the image ratio a4:3 Videodisplayed as is > 23). (This works VQT3X51 35

Advanced operations SC-BTT190P_eng.book 36 ページ ２０１２年２月２０日 月曜日 午後５時５分

∫ Unit Settings Press [OK] to show the following settings: Speaker settings

¾Front Panel Display  Changes the brightness of the unit’s display.

≥ If “Auto” is selected, the display is set to bright  ms dB L 0.0 C 0 R and only dimmed during playback. Complete dB 0  Test SW dB ms dB ¾Edit User Information 0 0.0 0

Change the user information registered in the LS RS Home menu.

∫ Quick Start A Volume (Channel balance) Speed of startup from power off is increased. B Delay time for the Center speaker ≥ When set to “On”, the internal control unit will be C Delay time for the Surround speakers powered and the idle power consumption will increase compared to when set to “Off”. (About ∫ Adjusting speaker level the power consumption > 45) (Effective when playing multi-channel audio) 1 Select “Test” and press [OK]. A test signal is output. ∫ Remote Control Code 2 While listening to the test signal Change the remote control code if other Press [3, 4] to adjust the volume of each Panasonic products react to this remote control. dB speaker (0 ). The volume can be adjusted between r6 dB ∫ Firmware Update (> 16) to s6 dB. Press [OK] to show the following settings: ≥ Set each speaker level according to the volume of the Front (L) and Front (R) ¾Automatic Update Check speaker volume respectively. When this equipment remains connected to the Internet, 3 Press [OK]. it will check for the latest firmware version when it is The test signal stops. turned on and you can update it if necessary.

¾Update Now You can update the firmware manually if a firmware update is available.

∫ System Information Press [OK] to show the following settings:

¾License Information about the software used by this unit is displayed.

¾Firmware Version Information Display firmware version of this unit and wireless LAN module.

∫ Restore Default Settings This returns all values in the Setup menu and the Option menu to the default settings, except for some settings of network, ratings, remote control code, language, etc.

36 VQT3X51 Press [ 1 B A Delay time for the Surround speakers Delay for time the speaker Center Press [ 2 1 up thefor difference (seethe table below). make to time the distanceadjust and the measure press [OK]. [ Press setting To speaker the finish distance 1 If either the same distance thefrom seating position. subwoofer, the for be except should speakers, the all sound, 5.1-channel with listening optimum For ∫ SC-BTT190P_eng.book 37 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 37 SC-BTT190P_eng.book

2 Ideal speaker Ideal speaker position speaker Actual position Delay time Delay Subtract the distanceSubtract the distanceSubtract [OK]. press o ) and press [OK]. box (

3 3 1 m(6f.8in.) ft.8 (16 cm 510 340cm (11ft. 1in.) Distance Distance : Primary listening distance: Primary 7 m( t in.) 6 ft. (5 cm 170 in.) 6 ft. (5 cm 170 in.) 5 ft. (4 cm 136 in.) 4 ft. (3 cm 102 8c 2f.2in.) ft.2 (2 cm 68 in.) ft.1 (1 cm 34 L , LS ms 4 0.0 3 3 LS , , , 2, 4 4

(Approx.) (Approx.) , ] and select setting to the 1 2, 1 or C C ] and to select “Complete” 2 1

2 3 ] to select the ] to the distanceselect is less than than less is RS 2 1 RS SW from from R 3 3 50ms 15.0 ms 10.0 3 Setting Setting . ms 5.0 ms 4.0 ms 3.0 ms 2.0 ms 1.0 . ms 5.0 : : , A B 2 1 3 3 menu Option the on Settings” “Audio to refer setting, detailson each more For all from speakers Enjoying sound effects ≥ ≥ 2 3 2 1 ∫ 1 this occurs, turn the sound effects/modesthis occurs,turnthe off. these soundeffects/modes areusedwithIf some sources. You areduction insoundqualitywhen mayexperience effect withsomesources. The soundeffects/modesorhaveno maynotbeavailable e.g., andthenor “2CHSOURCE”, press [OK]. [ Press Press [SURROUND]. play Adjusting speaker level during “ ALL SOURCE”, and then press [OK]. press then and SOURCE”, ALL “ the speaker level for each speaker. Press [ Press displayed isselected mode the While Repeat Repeat procedureifthis necessary. ( [OK]. press [ Press displayed is mode selected the While e.g., Press [ s Press [ the speaker.the select to times several SELECT] [CH Press setting mode. speaker the activate to SELECT] [CH Press Press [SOUND]. Surround Effects Surround Sound Effects 6 dB to ≥ Press [ Press the front speakers. front the 3 3 3 3 3 , ] (increase) or [ or (increase) ] , , , 4 r 4 ] to select thesetting and desired select to 4] 4] to select “MULTI CHSOURCE” ] to select the desired setting. ( setting. desired the select to ] 6 dB ] 2 to , ] 1] to theadjust balanceof select “2CH SOURCE” or or SOURCE” “2CH select 4 ] (decrease) to adjust (> 30) VQT3X51 > > 30) 30) 37

Advanced operations SC-BTT190P_eng.book 38 ページ ２０１２年２月２０日 月曜日 午後５時５分

[BTT196] [BTT195] Speaker installation Front speaker option Attach to a wall without the base and the stand. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and  speakers and personal injury. 

Attaching to a wall You can attach all of the speakers (except  subwoofer) to a wall. ≥ The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. 1 Drive a screw (not supplied) into the wall. A 51 mm (2q)  17 B 64 mm (2 /30q) 25  C 350 mm (13 /32q)  [BTT190]  Front speaker, Surround speaker  [BTT196] [BTT195] Surround speaker A At least 30 mm (1 3/16q) 5 B ‰ 4.0 mm ( /32q) C ‰ 7.0 mm to ‰ 9.4 mm (9/32q to 3/8q)  D Wall or pillar  E 5.5mm to 7.5mm (7/32q to 5/16q)

2 Fit the speaker securely onto the screw(s) with the hole(s). e.g., [BTT196] Front speaker DO NOT DO D 40 mm (1 9/16q) E 24 mm (15/16q)

Center speaker ≥ In this position, the ≥ Move the speaker speaker will likely so that the screw is fall if moved to the in this position.  left or right. Use the measurements indicated below to identify  the screwing positions on the wall.  ≥ Leave at least 20 mm (25/32q) of space above the speaker and 10 mm (13/32q) on each side to allow enough space for fitting the speaker.

F 18 mm (23/32q) G 25 mm (31/32q) H 230.5 mm (9 1/16q) 38 VQT3X51 ∫ 3 2 1 Detach the speaker from cable stand.the Preparation stand. the without using base connec directly by speaker It is possible to the shorten height of the front [BTT195] [BTT196] SC-BTT190P_eng.book 39 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 39 SC-BTT190P_eng.book stand. thethrough cable andrun Straighten the to thestand Reattaching thespeaker cable (> unit. main the of terminal the to and the cable to speakerConnect speaker the securely.the (supplied) screw Attach tighten base speaker and the the to base. the through detachedthe cable Thread Front speaker assembly option speaker assembly Front 1 12) 11, ting the speaker to the ting speaker the the hole. cable through the Pull out B A E D C 1 speaker Center speaker, Surround speaker, Front from dropping Preventing Front speaker [BTT195] [BTT196] 2 F e.g., Rear of the speaker Stringsupplied) (not ≥ a Thread to speaker.string the Approx.150 mm (5 mm Approx.150 Wall eye(not supplied) Screw tightly. tie and speaker a Thread from wall string the the to Less than 100 mm (3 mm 100 than Less from falling or dropping Preventing the speakers (22 lbs). k 10 over supporting is capable of which Use a string of less than than less of string a Use [BTT196] Front speaker Preventing from falling from falling Preventing When mounted on mounted When a wall placedon When the floor  29 / 32 15  q) /  16 q) ‰  2.0 mm ( mm 2.0   VQT3X51  3 / 32  q ), g 39

Advanced operations SC-BTT190P_eng.book 40 ページ ２０１２年２月２０日 月曜日 午後５時５分

Reference To return all settings to the factory preset. Troubleshooting guide ¾ Reset the unit as follows: Before requesting service, please perform the 1 While the unit is off, press and hold [OK], [B] following steps. and [Y] on the remote control at the same Do you have the latest firmware installed? time for more than 5 seconds. Firmware updates may be released to correct –“00 RET” is displayed on the unit’s display. operating irregularities that are discovered 2 Repeatedly press [1] (right) on the remote with certain movies. (> 16) control or [Í/I] on the unit until “08 FIN” is 4 displayed on the unit’s display. Make the following checks and visit our 3 Press and hold [OK] on the remote control or website for more information. [< OPEN/CLOSE] on the unit for at least 3 seconds. For U.S.A.: www.panasonic.com/help This unit is turned off when the input for the Enter the model number. TV is switched. For Canada: ¾ This is a normal phenomenon when using VIERA http://www.panasonic.ca Link (HDAVI Control 4 or later). For details please 4 read the operating instructions for the TV. Or visit our website to find a service center. The remote control doesn’t work properly. You can find a service center near you easily ¾ Change the batteries in the remote control. (> 8) on our website. ¾ The remote control and main unit are using different Other support information: codes. If “SET ” is displayed on the unit’s display “Customer Services Directory (United States when a button is pressed on the remote control, and Puerto Rico)” (> 50) or “Limited change the code on the remote control. (> 36, 44) Warranty (Only for CANADA)” (> 51). The TV tuner mode is not displayed when the The following do not indicate a problem with this unit: TV is switched on. – Regular disc rotating sounds. ¾ This phenomenon may occur, depending on the – Image disturbance during search. TV setting, when “Quick Start” is set to “On”. – Image disturbance when replacing 3D discs. ¾ Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable ∫ Unit doesn’t respond to remote to a different HDMI input terminal or by control or front panel buttons. changing the HDMI auto connection setting. Press and hold [Í/I] on the main unit for 3 seconds. – If still unable to power the unit off, disconnect the power You have forgotten your ratings password. cord, wait 1 minute, then reconnect the power cord. You want to cancel the ratings level. ∫ Cannot eject disc. ¾ The ratings level returns to the factory preset. 1 While the unit is on, press and hold [OK], [B] The unit may have a problem. and [Y] on the remote control at the same 1 While the unit is off, press and hold [OK], [B] time for more than 5 seconds. and [Y] on the remote control at the same –“00 RET” is displayed on the unit’s display. time for more than 5 seconds. 2 Repeatedly press [1] (right) on the remote –“00 RET” is displayed on the unit’s display. control or [Í/I] on the unit until “03 VL” is 2 Repeatedly press [1] (right) on the remote displayed on the unit’s display. control or [Í/I] on the unit until “06 FTO” is 3 Press [OK] on the remote control or displayed on the unit’s display. [< OPEN/CLOSE] on the unit. 3 Press [OK] on the remote control or [< OPEN/CLOSE] on the unit. This unit does not recognize the USB General operation connection correctly. ¾ Disconnect and reconnect the USB cable. If it To return to the factory preset. still does not recognize the connection, turn ¾ Select “Yes” in “Restore Default Settings” in the power of this unit off and on again. the Setup menu. (> 36) ¾ USB devices may not be recognized by this unit when connected using the following : 40 VQT3X51 ¾ ¾ ¾ 3 2 1 ¾ occurs. Jittering distorted. is Picture TV. the on appear not do unit this from images The 2 1 off. turn not does unit The ¾ ¾ The unit switches standbyto mode. SC-BTT190P_eng.book 41 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 41 SC-BTT190P_eng.book – a USB extension cable other than thethan other cable extension USB a – hub USB a – Set the item again. ( again. item the Set displayed whenplaying ( 3D discs. screen setup the in Playback” “2D select before“Set play”in the and menu, Setup After the this discfrom unit, removing select output depending on the method. connection menu isset to images may not “Auto”, be Setup in the Playback” BD-Video “3D When USB cable that is supplied with the HDD. the with is supplied that cable USB the unit, use thisto HDD USB connect If you the same time for more than 5 seconds. 5 than more for time same the [ Press and hold [OK] on the remote control or [ [+VOLUME], hold and press off, is unit the While follows: as unit the Reset [ Press activated. is devices safety unit’s the of One then reconnect the power cord.) power the reconnect then the waitdisconnect powercord, 1 minute, off, unit the power unable to still (If seconds. displayed on unit’sthe display. [ or control [ press Repeatedly seconds. time morethan 5 for and [Y] on at the control theremote same While the unit is on, press and hold [B][OK], follows: setting as the Reset Resolution”. An incorrect resolution is selected in “HDMI and hold [ Press passed, the powerwill beturned off. ( When time the set the for sleeptimer has mode after 30minutes if it is inactive. ( standbyto turn willautomatically unit This Picture –When Dolby Digital Plus, Dolby TrueHD, Digital Dolby Plus, Dolby –When DY-WL5 (optional) Adaptor LAN Wireless the supplied with –“00 RET” –“00 RET” is on thedisplayed unit’s display. < < Í Settings” and make proper settings. ( settings. proper make and Settings” bitstream, “Yes” select Default in “Restore in output not audio are DTS-HD and /I] on the main unit to turn the unit on. unit the to turn unit main on the /I] OPEN/CLOSE] on the unit for at least 3 seconds. OPEN/CLOSE] and and [ OPEN/CLOSE] /I] Í/I] on the unit until is “04PRG” Í > /I] /I] on the mainunit for 5 ] (right) on the remote remote on the (right) 1] 32) Í /I] on the main unit at > 33) > > > 8) 18) 36) ¾ ¾ ¾ ¾ ¾ video3D is not output. ¾ Video is not output in high-definition. ¾ ¾ The aspect ratio the of isscreen abnormal. screen. the of edge the around displayed is band A black ¾ discs. on recorded The subtitles captions closed overlap ¾ subtitles. No ¾ ¾ 2D. as correctly output not is video 3D h Voffraot3 minutes. 30 off about TV for the If irregular onyourTV,coloring occurs turn Are the settings on this unit and the TV correct? ( If itpersists, move thespeakers furtheraway from the TV. Confirm the “TV Aspect” is set properly. ( set is Aspect” “TV the Confirm selected on the TV.on the selected Check that proper videoinputHDMI is TV. the setting on 3D due to changes in etc.resolution Check the being might toplayed switch back 2D video TV, connected on the Depending video the format. TV connected ( Change the settings as requiredbythe properly.set is menu ( Setup in the Resolution” that “HDMI Confirm Adjust the aspect setting on the television. the setting on aspect the Adjust setting on TV.the Turn off subtitles or the captionthe closed cannot captions/subtitles be displayed. closed on, is output progressive When TV. the of settings the with enjoyed in 3D are played backin accordance andthat structure) can be screen side (2 Discs that haverecorded withtitles Sideby BD-Video Playback”) displayed whenplaying ( 3D discs. screen setup inthe Playback” “2D select and “Set Select play”in before the menu, Setup

(> 28) > > 32) 3 “3DType”) 33, VQT3X51 > > 3 “3D 33, > 35) 21) 41

Reference SC-BTT190P_eng.book 42 ページ ２０１２年２月２０日 月曜日 午後５時５分

Sound Playback No sound. Disc cannot be played. Low volume. ¾ The disc is dirty. (> 5) Distorted sound. Cannot hear the desired audio type. Still pictures (JPEG) do not play back normally. ¾ Check connections to speakers and other ¾ The images that were edited on the PC, such as equipment. (> 11s14) Progressive JPEG, etc., may not be played back. ¾ Ensure the speaker settings for your speakers are correct. (> 36) I can’t play back BD-Live. ¾ To output audio from a device connected with ¾ The SD card is write-protected. (> 7) an HDMI cable, set “HDMI Audio Output” to ¾ Confirm that this unit is connected to the “On” in the Setup menu. (> 33) broadband Internet. (> 14) ¾ When “BD-Video Secondary Audio” is set to “On”, ¾ Confirm the “BD-Live Internet Access” Dolby TrueHD, Dolby Digital Plus, DTS-HD Master settings. (> 35) Audio and DTS-HD High Resolution Audio are ¾ Confirm an SD card is inserted into the SD output as Dolby Digital or DTS Digital Surround. card slot. (> 17) ¾ Re-master will not work when the bitstream signal is output from the HDMI AV OUT terminal. (> 30) Alternative soundtrack and subtitles cannot ¾ Depending on the connected equipment, the be selected. sound may be distorted if this unit is ¾ The languages are not recorded on the disc. connected with an HDMI cable. ¾ You may not be able to use the Option menu to ¾ The multi-channel audio from a device change the soundtrack and subtitles on some discs. connected to the TV is not output in it’s Use the disc’s menus to make changes. (> 20) original multi-channel form. –If the device has an optical audio output terminal, connect the device to this unit’s iPod/iPhone operation DIGITAL AUDIO IN terminal. (> 13) Cannot charge or operate. ¾ Check that the iPod/iPhone is connected firmly. (> 22) No surround sound. ¾ The battery of the iPod/iPhone is depleted. Charge ¾ Press [SURROUND] to select a surround effect. (> 37) the iPod/iPhone, and then operate again. ¾ When unexpected operation occurs while using the Cannot switch audio. iPod/iPhone, connect the iPod/iPhone again or try ¾ When audio is output from the HDMI AV OUT to restart the iPod/iPhone. terminal, set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM”. (> 32) Radio No sound from the TV. Distorted sound or noise is heard. ¾ Press [EXT-IN] to select the corresponding ¾ Adjust the position of the antenna. source. (> 17) ¾ When connecting the unit to a TV using an A beat sound is heard. HDMI cable, check whether the HDMI ¾ Try to keep a certain amount of distance terminal on the TV is labeled “HDMI (ARC)”. If between the antenna and the TV. not labeled in this way, connect using the HDMI cable in combination with an optical Stations cannot be selected. digital audio cable.(> 12) 1 Press [RADIO] to select “FM”. ¾ If there is no sound from the equipment 2 Press and hold [RADIO]. connected to this unit’s DIGITAL AUDIO IN terminal, please make sure that the optical After a few seconds the display changes to show audio output of the equipment is set to PCM. the current lowest frequency (87.9 MHz). Continue to hold the button down. The lowest frequency changes (87.5 MHz) and the step is changed.

42 VQT3X51 ¾ ¾ or video framesdropped are during playback. back played not is server media Certified DLNA the from video connection, LAN wireless When using 1 ¾ Noise is excessive. ¾ 2 ¾ I to network. can’t connect the “AUTO STEREO” select circumstances, In normal SC-BTT190P_eng.book 43 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 43 SC-BTT190P_eng.book On the “Wireless Settings” screen ( screen Settings” “Wireless the On connection interruptions orother interruptions connection problems. telephone etc. at in result may 2.4 GHz cordless usewithSimultaneous amicrowave, “AES”. to type encryption the set router, to wireless necessary is it 802.11n use If you problem. GHz) (2.4 the solve may router wireless GHz) (2.4 Higher transfer rate such router as 802.11n and hold [ Press Change the audio to be output asmonaural. Setting” ( Setting” Network “Easy the perform and network wired a to connect no improvement, is there If improves. state connection the if and see router wireless your of angle or position the change interrupted, is being connection the or lit are indicators fewer or 3 If connection. astable for target the is indicators 4“Reception” least ofat lighting continuous device and connect device andconnect accordingly. each for instructions operating the Check [ Press (> the andsettings. connection Confirm network ≥ monaural. becomes sound The Network the frequency.the To change again or button the press cancel, 4 5 34) 15, 14, j > AUDIO] to select “MONO”. 15) again. 15) j AUDIO]. > 34), the the 34), ¾ inserted. disc No ¾ ¾ Cannot display on this unit. ¾ Cannot play. appear on televisionthe orunit’s display. numbers service or messages followingThe Messages ¾ F99 ¾ security setting. stronger a to change to recommended is It weak. is setting security network wireless current The ¾ set. not is address IP ¾ $ This operation is not available. not is operation This etc., from DLNA compatibleetc., from DLNA devices. video, back playing when required is Encryption instructions of thewireless router being used. the to refer details, For reasons. safety for encrypt to recommended It is encryption”. “No “Open system”, the encryption or type to isset to set is LAN wireless the for type Authentication The disc may be upside down. may disc The displayed andre-insert card. the “SD” on theConfirm unit’s displayis not You tried to play a image.non-compatible PAL in recorded etc.). video, You inserted incompatiblean disc (Discs The unit fails to operate properly. operate to fails unit The [ Press necessary.) if acquisition address automatic the (Select Gateway”. and“Default “Subnet Mask”, Address”, “IP the Set ---”. ---. ---. “---. is Settings” Address/DNS in“IP Address” “IP The example; For the unit. by unsupported are operations Some unit to standby, then switch on. back on the mainunit for 3 to theseconds switch –BD-Video: During playback, reverse –BD-Video: reverse Duringplayback, On the On television On the unit’s display not possible. not is orreverse frame-by-frame slow-motion VQT3X51 Í /I] /I] 43

Reference SC-BTT190P_eng.book 44 ページ ２０１２年２月２０日 月曜日 午後５時５分

NET IPOD OVER CURRENT ERROR ¾ While connecting to a network. ¾ The iPod/iPhone is drawing too much power. Remove the iPod/iPhone, and turn the unit off No PLAY and on again. ¾ There is a viewing restriction on a BD-Video or DVD-Video. (> 35) START ¾ The system is being restarted during the No READ firmware update. Please do not turn off the ¾ The media is dirty or badly scratched. The unit. unit cannot play. UPD/ PLEASE WAIT (“  ” stands for a number.) ¾ The unit is carrying out an internal process. ¾ The firmware is being updated. This is not a malfunction. You cannot operate Please do not turn off the unit. the unit while “PLEASE WAIT” is displayed. FINISH REMOVE ¾ The firmware update is complete. ¾ The USB device is drawing too much power. Remove the USB device. NOT CONDITIONAL SET  (“  ” stands for a number.) ¾ The requested operation cannot be ¾ The remote control and main unit are using conducted. different codes. Change the code on the remote control. SET OK Press and hold [OK] and ¾ The stations are set, and the radio tunes to the indicated number the last preset station. button at the same time for more than 5 seconds. ERROR ¾ Automatic presetting is unsuccessful. Preset U59 the stations manually. ¾ The unit is hot. The unit switches to standby for safety TUNED/STEREO reasons. Wait for about 30 minutes until the ¾ Stereo broadcasting or stereo sound is message disappears. selected. Select a position with good ventilation when installing the unit. TUNED ¾ Monaural broadcasting or monaural sound is H or F (“  ” stands for a number.) selected. ¾ Check and correct the speaker cable connections. ¾ There is something unusual. ¾ Check the unit using the troubleshooting guide. If the service number remains displayed, do the following. 1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it. 2 Press [Í/I] to turn the power on. If the service number remains displayed despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.

44 VQT3X51 Digital Input Audio FTC TOTAL POWER OUTPUT: TOTAL FTC POWER BT9][BTT195] [BTT196] FRONT SPEAKERS Antenna terminals: range: Frequency W OUTPUT: TOTAL 1000 RMS POWER range: humidity Operating Operating temperature range: Specifications Dimensions (W Dimensions Mass (Weight): Mass Audio Input Audio SC-BTT190P_eng.book 45 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 45 SC-BTT190P_eng.book Power supply: Power mode: standby in consumption Power consumption: Power Optical FRONT: distortion harmonic total % 10 kHz, 1 SUBWOOFER Full range: Full Format: Audio frequency: Sampling SURROUND: Dimensions (W Mass (Weight): Mass AUX: SUBWOOFER: distortion harmonic total % 1.0 Hz, 120 Hzto 45 FRONT: distortion total harmonic % 1.0 kHz, 20 to Hz 120 CENTER: CENTER: SURROUND: 100 Hz, 10 % total harmonic distortion total harmonic % 10 Hz, 100 GENERAL SPEAKER SECTION* SPEAKER SECTION FM TUNER SECTION AMPLIFIER k : k H k H k 75 kHzstep) MHz (100 108.0 MHz to 87.5 step), kHz MHz (200 107.9 MHz to 87.9 k k D): 1 1 ≠ D): (unbalanced) 6.5 cm (2 cm 6.5 (11 mm 292 0 (16 mm 430 prx .2k 2.42 Approx. (no condensation) (no RH % % to 80 35 prx . k 2.4 Approx. AC 120 V, 60 Hz 60 V, 120 AC W 0.05 Approx. W 83 o C 1 3 W 430 15 / to 40 2 PCM, Dolby Digital, DTS Digital, Dolby PCM, kHz 48 kHz, 44.1 kHz, 32 (3 ch per W 60 ch (3 per W 200 160 W per ch (3 per W 160 100 W (3 W 100 60 W per ch (3 ch per W 60 160 W per ch (3 per W 160 90 W per ch (3 ch per W 90 160 W per ch (3 per W 160 / qk 16 qk k 46 k o 15mm 1185 1 1 7mm 47 C / 21 2 55 q / (32 / ) TYPE CONE 32 64 (. lbs) g (5.3 qk ≠ qk (. lbs) g (5.3 o F ) 11 k 10 to 104 k 6 mm 263 1 / 23 9 mm 292 ≠ ≠ ≠ 2 q / ≠ ≠ ≠ ≠ ) 64 ) ) ) ) ) ) ) q o ) F ) LASER Specification LASER SUBWOOFER CENTER SPEAKER SURROUND SPEAKERS [BTT190] Specifications notice. aresubjecttochangewithout Thisunitsupports“HDAVI Control5”function. * AVHDMI output* system: Signal Ethernet: SD card slot: USB slot: thespeakersis3 impedanceofall The * Wave length: Class Woofer: Woofer: range: Full Full range: Full connector: Output Full range: Full Laser power: Laser Mass (Weight): Mass (Weight): Mass Mass (Weight): Mass Dimensions (W Dimensions (W Dimensions Super Tweeter: (W Dimensions Dimensions (W Dimensions Mass (Weight): Mass VIDEO SECTION VIDEO SECTION TERMINAL I LASER Product k k k k H H H H Type pin) (19 A with the safety protection safety the with No hazardous radiation is emitted 790 nm (CDs)/660 nm (DVDs)/405 nm (BDs) NTSC system 10BASE-T/100BASE-TX 1 system 1 Connector: 2 USB2.0: system k k k k D): D): D): D): 6cm(6 16 (2 cm 6.5 6.5 cm (2 cm 6.5 6.5 cm (2 cm 6.5 prx .7k 0.37 Approx. k 0.37 Approx. prx .3k 0.53 Approx. Piezo type Piezo (5 mm 145 (3 mm 80 prx . k 3.0 Approx. 0mm 80 k mm 280 (3 (11 23 5 5 / / 1 32 32 / / 32 32 qk qk qk qk k k k 5 5 3 mm 139 11 3 1 3 mm 139 1 1 8. mm 289.5 1 1 1 ≠. / / / 5 4mm 84 2 2 / / 2 / 13 / 2 2 2 q qk qk 16 q q q ) CONE TYPE) CONE / ) CONE TYPE ) CONE TYPE ) CONE TYPE 32 qk3 (. lbs) g (6.6 VQT3X51 2 2 qk g g g 13 13 (. lbs) (0.8 lbs) (0.8 (. lbs) (1.2 k / / 3 10 16 16 k k / 1mm 71 32 k q q 1mm 71 mm 78 ) ) 5 q 5 mm 258 / ) 32 q ) 45

Reference SC-BTT190P_eng.book 46 ページ ２０１２年２月２０日 月曜日 午後５時５分

File format Supplemental information File format Extension Reference ∫ Display languages list This unit supports ID3 tags, but only titles, artist names MP3 “.MP3”, “.mp3” Display Language Display Language Display Language and album names can be ENG English JPN Japanese ARA Arabic displayed. FRA French CHI Chinese HIN Hindi DEU German KOR Korean PER Persian ≥ MOTION JPEG and ITA Italian MAL Malay IND Indonesian Progressive JPEG is not ESP Spanish VIE Vietnamese MRI Maori supported NLD Dutch THA Thai BUL Bulgarian You may not be able to SVE Swedish POL Polish RUM Romanian JPEG “.JPG”, “.jpg” ≥ NOR Norwegian CES Czech GRE Greek play back the file if you DAN Danish SLK Slovak TUR Turkish have edited the folder POR Portuguese HUN Hungarian Others structure or the file name RUS Russian FIN Finnish on a PC or other device. “.MKV”, “.mkv” ≥ The video file and subtitles text file are inside the same folder, ∫ Language code list Subtitles text and the file names are the same except for the MKV file Language Code Language Code Language Code file extensions. “.SRT”, “.srt”, Abkhazian: 6566 Gujarati: 7185 Rhaeto-Romance: “.SSA”, “.ssa”, ≥ Some MKV files may not Afar: 6565 Hausa: 7265 8277 “.ASS”, “.ass” play back, depending on Afrikaans: 6570 Hebrew: 7387 Romanian: 8279 the video resolution and Albanian: 8381 Hindi: 7273 Russian: 8285 frame rate condition. Amharic: 6577 Hungarian: 7285 Samoan: 8377 Arabic: 6582 Icelandic: 7383 Sanskrit: 8365 Maximum sampling rate: Armenian: 7289 Indonesian: 7378 Scots Gaelic: 7168 FLAC “.flac” 192 kHz/24 bit Assamese: 6583 Interlingua: 7365 Serbian: 8382 Aymara: 6589 Irish: 7165 Serbo-Croatian: 8372 Maximum sampling rate: Azerbaijani: 6590 Italian: 7384 Shona: 8378 WAV “.wav” Bashkir: 6665 Japanese: 7465 Sindhi: 8368 48 kHz/16 bit Basque: 6985 Javanese: 7487 Singhalese: 8373 Bengali; Bangla: Kannada: 7578 Slovak: 8375 MPO “.mpo” 3D still picture 6678 Kashmiri: 7583 Slovenian: 8376 ≥ With certain recording states and folder structures, the Bhutani: 6890 Kazakh: 7575 Somali: 8379 Bihari: 6672 Kirghiz: 7589 Spanish: 6983 play order may differ or playback may not be possible. Breton: 6682 Korean: 7579 Sundanese: 8385 Bulgarian: 6671 Kurdish: 7585 Swahili: 8387 Burmese: 7789 Laotian: 7679 Swedish: 8386 Byelorussian: 6669 Latin: 7665 Tagalog: 8476 Cambodian: 7577 Latvian, Lettish: 7686 Tajik: 8471 Restriction on use of Catalan: 6765 Lingala: 7678 Tamil: 8465 Chinese: 9072 Lithuanian: 7684 Tatar: 8484 unauthorized copied content Corsican: 6779 Macedonian: 7775 Telugu: 8469 Croatian: 7282 Malagasy: 7771 Thai: 8472 This unit adopts the following technology for Czech: 6783 Malay: 7783 Tibetan: 6679 Danish: 6865 Malayalam: 7776 Tigrinya: 8473 copyright protection. Dutch: 7876 Maltese: 7784 Tonga: 8479 English: 6978 Maori: 7773 Turkish: 8482 Esperanto: 6979 Marathi: 7782 Turkmen: 8475 Cinavia Notice Estonian: 6984 Moldavian: 7779 Twi: 8487 This product uses Cinavia technology to limit Faroese: 7079 Mongolian: 7778 Ukrainian: 8575 Fiji: 7074 Nauru: 7865 Urdu: 8582 the use of unauthorized copies of some Finnish: 7073 Nepali: 7869 Uzbek: 8590 commercially-produced film and videos and French: 7082 Norwegian: 7879 Vietnamese: 8673 Frisian: 7089 Oriya: 7982 Volapük: 8679 their soundtracks. When a prohibited use of an Galician: 7176 Pashto, Pushto: 8083 Welsh: 6789 unauthorized copy is detected, a message will Georgian: 7565 Persian: 7065 Wolof: 8779 German: 6869 Polish: 8076 Xhosa: 8872 be displayed and playback or copying will be Greek: 6976 Portuguese: 8084 Yiddish: 7473 interrupted. Greenlandic: 7576 Punjabi: 8065 Yo r u b a : 8 9 7 9 Guarani: 7178 Quechua: 8185 Zulu: 9085 More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

46 VQT3X51 SC-BTT190P_eng.book 47 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 47 SC-BTT190P_eng.book Java is a registered trademark ofOracle and/or its affiliates. VIERA Link™isatrademarkofPanasonicCorporation. Corporation. HDAVI Panasonic of trademark is a Control™ the UnitedStatesandothercountries. HDMI, theHDMILogo,andHigh-DefinitionMultimediaInterfacearetrademarksorregistered trademarksofHDMI See http://www.mpegla.com. information maybeobtainedfromMPEGLA,LLC. from avideoproviderlicensedtoprovideAVC/VC-1Video.Nolicenseisgrantedorshall beimpliedforanyotheruse.Addition decode AVC/VC-1Videothatwasencodedbyaconsumerengagedinpersonalandnon-commercial activityand/orwasobtained use ofaconsumerto(i)encodevideoincompliancewiththeAVCStandardandVC-1 (“AVC/VC-1Video”)and/or(ii) This productislicensedundertheAVCpatentportfoliolicenseandVC-1 license forthepersonalandnon-comm Rights Reserved. registered trademarks&DTS-HDMasterAudio|EssentialisatrademarkofDTS,Inc.Product includessoftware.©DTS,Inc.All 7,212,872 &otherU.S.andworldwidepatentsissuedpending.DTS-HD,theSymbol, DTS-HDandtheSymboltogetherare Manufactured underlicenseU.S.PatentNos:5,956,674;5,974,380;6,226,616;6,487,535; 7,392,195;7,272,567;7,333,929; Dolby, ProLogic,andthedouble-DsymbolaretrademarksofDolbyLaboratories. Manufactured underlicensefromDolbyLaboratories. on, the user is encouraged to try to correct the inte the correct to try to encouraged is user the on, theequipme by turning can which be determined reception, vision ortele radio to interference doescauseharmful equipment this i aparticular in occur not will interference that However,guarantee no is communications. there radio to interference harmful and radio frequency uses can radiate generates, toprovide reas designed limits are These This equipment has been tested and found to comply with the limits fo equipment thelimits hasbeen and foundtocomply with This tested Note: FCC ONLY APPLIES FOLLOWING THE U.S.A. THE IN This Class Bdigital apparatuscomplieswithCanadianICES-003. This ONLY APPLIES FOLLOWING THE CANADA. IN Telephone No.:1-800-211-PANA (7262) ConsumerMarketingCompanyofNorthAmerica Panasonic Contact:Support PanasonicWay,One Secaucus,NJ07094 CorporationofNorthAmerica Panasonic Party: Responsible SC-BTT196 No.: Model Trade Name: Panasonic ofConformity Declaration thatmaycauseundesiredoperation. received,includinginterference devicemustacceptanyinterference (2) this and devicemaynotcauseharmfulinterference, (1) This two conditions: issubjecttothefollowing Operation FCCRules. device complieswithPart15ofthe This equipment. authoritytooperatethis user’s forcompliancecouldvoidthe responsible theparty notexpresslyapprovedby devices.Anychangesormodifications whenconnectingtoperipheral cables FCC Caution:To anduseonlyshieldedinterface followtheattachedinstallation assurecontinuedcompliance, instructions ≥ ≥ ≥ ≥ Connect the equipment into an outlet onacircuitdifferentwhichthereceiverisconnected. fromthatto theequipmentintoanoutlet Connect orrelocatethereceivingantenna. Reorient Consult the dealer or an experienced radio/TV technician for help. for technician radio/TV an experienced or dealer the Consult andreceiver. equipment between the the separation Increase SC-BTT190 SC-BTT195 onable protection against harmful interference in a residential installation. This equ This installation. a residential in interference harmful against protection onable energy and, if not installed and used in accordance with the instructions, may may instructions, the with accordance used in and installed not if and, energy rference by rference one ormore of r a Class B digital device, pursuant to Part toPart 15 oftheFCCr a pursuant device, BClass digital the following measures: thefollowing

Licensing LLCin VQT3X51 nstallation. If If nstallation. ipment Rules. cause nt offand nt al ercial 47

Reference SC-BTT190P_eng.book 48 ページ ２０１２年２月２０日 月曜日 午後５時５分

VIERA Connect is a trademark of Panasonic Corporation. EZ Sync™ is a trademark of Panasonic Corporation. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony Corporation. SDXC Logo is a trademark of SD-3C, LLC.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.

Skype, associated trade marks and logos and the “ ” logo are trade marks of Skype Limited.

“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.

“Made for iPod” , and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

gSOAP Public License 1.3

Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved. THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

(1) MS/WMA This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

(2) MS/PlayReady/Final Product Labeling This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

(3)MS/PlayReady/End User Notices Content owners use Microsoft PlayReadyTM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

(4) Vorbis The software license is displayed when “License” in the Setup menu is selected.(> 36)

(5) FLAC The software license is displayed when “License” in the Setup menu is selected.(> 36)

48 VQT3X51 SC-BTT190P_eng.book 49 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 49 SC-BTT190P_eng.book 7,369,677 and worldwide patents Verance7,369,677 andworldwide andpendingunderlicensefrom issued Corporation.Allrightsreserved. Copyright 2004-2010Verance Corporation.Cinavia .The Independent JPEG Group's JPEG software. 4. FreeType code. 3. This product includes software developed by the University of California, Berkeley andits contributors. 2. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. 1. For the software categorized as (5) includes asfollows. http://panasonic.net/avc/oss/bdplayer/AWBPP12.html Source code is also freely available toyou and any other member of thepublic via our website below. [email protected] Contact Information copy of the corresponding source code covered under GPL v2/LGPL v2.1. provided below, for acharge no more than our costof physically performing source codedistribution, acomplete machine-readable At leastthree (3) years from delivery ofproducts, Panasonic willgi MERCHANTABILITY FOR APARTICULARof warranty or FITNESS PURPOSE. The GPL/LGPL software is distributed in the hope that it willbe useful, but WITHOUT ANY WARRANTY, without even the implied http://panasonic.net/avc/oss/bdplayer/AWBPP12.html individuals at In addition, the software categorized as(3) and(4) are copyrighted byseveral individuals. Please refer tothecopyright noti http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and For the software categorized as (3) and (4), please refer tothe terms and conditions ofGPL v2 andLGPL v2.1, as thecase may open sourced software other thanthe software licensed(5) under the GPL v2and/or LGPL v2.1 the software licensed under the GNU LESSER General(4) Public License, Version 2.1 (LGPL v2.1) and/or, the software licensed under the GNU General Public(3) License, Version 2 (GPL v2), the software owned bythird party and licensed(2) to Panasonic Corporation, the software developed independently by or for(1) Panasonic Corporation, This product incorporates the following software: (http://www.openssl.org/) TM isaVerance byU.S.Patent Corporationtrademark.Protected ve to anythird party whocontacts usat thecontact infor VQT3X51 ce of those those of ce mation be at 49

Reference SC-BTT190P_eng.book 50 ページ ２０１２年２月２０日 月曜日 午後５時５分

Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Blu-ray and DVD Products Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) commercial use such as hotel, office, restaurant, or other business or rental use If your product does not work properly because of a defect in materials or of the product, or service by anyone other than a Factory Service Center or workmanship, Panasonic Consumer Marketing Company of North America other Authorized Servicer, or damage that is attributable to acts of God. (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER at its option either (a) repair your product with new or refurbished parts, (b) “LIMITED WARRANTY COVERAGE”. replace it with a new or a refurbished equivalent value product, or (c) refund THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR your purchase price. The decision to repair, replace or refund will be made by CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS the warrantor. PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or Product or Part Name Parts Labor recorded content. The items listed are not exclusive, but for illustration only.) Blu-ray Disc Player, Portable Blu-ray Disc ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY 1 year 90 days Player OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Blu-ray Home Theater System 1 year 1 year Some states do not allow the exclusion or limitation of incidental or DVD Player, Portable DVD Player 1 year 90 days consequential damages, or limitations on how long an implied warranty lasts, so DVD Recorder 1 year 90 days the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights Not Rechargeable Batteries (pack) 90 days which vary from state to state. If a problem with this product develops during or Applicable after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s During the “Labor” warranty period there will be no charge for labor. During the Consumer Affairs Department at the addresses listed for the warrantor. “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED cosmetic parts (cabinet). This warranty only applies to products purchased and WARRANTY, ARE YOUR RESPONSIBILITY. serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”. Customer Services Directory (United States and Puerto Rico) Mail-In Service For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to: Obtain Product Information and Operating Assistance; locate your Panasonic Exchange Center nearest Dealer or Service Center; purchase 4900 George McVay Drive Parts and Accessories; or make Customer Service and Suite B Literature requests by visiting our Web Site at: McAllen, TX 78503 http://www.panasonic.com/help [email protected] or, contact us via the web at: http://www.panasonic.com/contactinfo When shipping the unit, carefully pack, include all supplied accessories listed in You may also contact us directly at: the Owner’s Manual, and send it prepaid, adequately insured and packed well in 1-800-211-PANA (7262) a carton box. When shipping Lithium Ion batteries please visit our Web Site at Monday-Friday 9am-9pm, www.panasonic.com/BatteryHandling as Panasonic is committed to providing Saturday-Sunday 10am-7pm EST the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A For hearing or speech impaired TTY users, TTY: 1-877-833-8855 valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE Accessory Purchases (United States and Puerto Rico) PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/ PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE Purchase Parts, Accessories and Instruction Books online for all Panasonic REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF Products by visiting our Web Site at: PURCHASE. http://www.pstc.panasonic.com Or, send your request by E-mail to: Limited Warranty Limits And Exclusions [email protected] You may also contact us directly at: This warranty ONLY COVERS failures due to defects in materials or 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) workmanship, and DOES NOT COVER normal wear and tear or cosmetic (Monday-Friday 9am-9pm EST) damage. The warranty ALSO DOES NOT COVER damages which occurred in Panasonic National Parts Center shipment, or failures which are caused by products not supplied by the 20421 84th Ave S., Kent, WA 98032 warrantor, or failures which result from accidents, misuse, abuse, neglect, (We accept Visa, MasterCard, Discover Card, American Express) mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, For hearing or speech impaired TTY users, TTY: 1-866-605-1277 As of January 2012 User memo: The model number and serial number of this product can be DATE OF PURCHASE found on either the back or the bottom of the unit. DEALER NAME Please note them in the space provided below and keep for DEALER ADDRESS future reference. TELEPHONE NUMBER MODEL NUMBER

SERIAL NUMBER

50 VQT3X51 Please locate your nearest Authorized Servicentre. Authorized nearest your locate Please REPAIRSPRODUCT Centre: Care Customer OPERATIONPRODUCT ASSISTANCE assistance, information and operation product For WARRANTY SERVICE territory. or province your on depending vary which rights other have may you and rights legal specific you gives warranty This applicable. be not may exclusions and limitations above the so warranties, implied of exclusion the or damages, orconsequential incidental of limitation or exclusion the allow donot jurisdictions some instances, In certain only.) illustration for but exhaustive, isnot of items list This content. recorded or memory other or data images, or to media damage or of loss Servicer, Authorized the from and to travel BREACH ANYEXPRESS OF IMPLIED OR WARRANTY. examples, (As this warranty excludes damages for lost time, ANYOF RESULTING DAMAGES CONSEQUENTIAL ARISINGOUT OR PRODUCT THE THIS USEOF FROM PURPOSE. EVENT IN NO WILL PANASONIC BELIABLE CANADAINC. ANY FOR SPECIAL, INDIRECT OR INCLUDING ANYIMPLIED WARRANTIES OFMERCHANTABILITYFITNESSAND APARTICULAR FOR THISEXPRESS, LIMITED WARRANTYINOF LIEUALLOTHERWARRANTIES, IS EXPRESS IMPLIED, OR warranty. this under coverage from excluded also are batteries cell Dry of God. to acts attributable is that damage Servicer, or Authorized an than other anyone by service or product, the of use rental or business other or restaurant, office, hotel, as such use commercial liquids, or humidity sand, of introduction modification, damage, lightning surge, line power maintenance, improper controls, of consumer alteration misapplication, mishandling, neglect, abuse, misuse, accidents, from result which failures Inc., or Canada Panasonic by supplied not byproducts caused are which failures or shipment, in occurred which damages COVER NOT DOES ALSO warranty The damage. orcosmetic tear and wear normal COVER DOESNOT and workmanship, ONLY or warranty This materials in defects to due COVERSfailures OF PROOF DATE AMOUNTPAIDOTHER SHOWING PURCHASE, OF ORIGINAL PURCHASE OF ANDPLACE TOTORECEIVE BEELIGIBLE WARRANIN ORDER packaging. original the in condition new in you to delivered was product which and is”, “as sold not was product which Canada, in used and purchased and Canada in dealer Panasonic authorized an by sold above mentioned product brand Panasonic a of gift, a as purchased was it whom for person the purchaser, or original the to only given is warranty This repair, to replace decision The price. purchase with new or refurbished parts, (b)replace it with a new or arefurbished product your equivalent repair (a) either valueits option at to, product,agrees purchase or (c) original of refund date the from yourbelow stated as period a for and use normal under workmanship and material in defects from free be to product this warrants Inc. Canada Panasonic (Only forLimited Warranty CANADA) LIMITATIONS EXCLUSIONS AND REQUIRED SC-BTT190P_eng.book 51 ページ ２０１２年２月２０日 月曜日 午後５時５分 ページ 51 SC-BTT190P_eng.book Home Theater Systems Product -One (1) year, parts and labour Panasonic Audio Receivers - One (1) year, parts and labour Panasonic BD/DVD Product - One (1) year, parts and labour Technics Audio Product -One (1)year, parts and labour Carefully pack and send prepaid, adequately insured and preferably in the original carton. original the in preferably and insured adequately prepaid, send packand Carefully Include details of the defect claimed, and proof of date of original purchase. original of date of proof and claimed, defect the of details Include PANASONIC PRODUCT-LIMITED WARRANTY IF YOU SHIP THE PRODUCT TO THESHIP A SERVICENTRE PRODUCT YOU IF 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 L4W Ontario Mississauga, Drive, Ambler 5770 Telephone#: 1-800-561-5505 Link: “Support “Support Link: Email link: “Support “Support Email link: 238-2360 (905) #: Fax Panasonic Canada Inc. or refund or refund # Panasonic Servicentre Panasonic please contact: please TY SERVICE HEREUNDER, will be made made will be # contact us contact , faulty installation, set-up adjustments, misadjustment misadjustment adjustments, set-up installation, , faulty by Panasonic Canada Inc. Canada by Panasonic # email” on www.panasonic.ca on email” ® locator” on www.panasonic.ca on locator” A PURCHASE RECEIPT OR A PURCHASERECEIPT VQT3X51 51 IS

Reference SC-BTT190P_eng.book 52 ページ ２０１２年２月２０日 月曜日 午後５時５分

Index A Language R Audio Audio ...... 33 Radio ...... 25 Changing audio ...... 20 Menu...... 34 Re-master...... 30 Language ...... 28, 33 On-screen...... 34 Restore Default Settings. . .36 B Soundtrack...... 28 Resume play function . . . . .20 BD-Live...... 21 Subtitle ...... 28, 33 M S D Media Renderer ...... 27 Subtitle ...... 28 , 33 DLNA ...... 27 Multi User Mode ...... 19 U USB device...... 7 F N File format ...... 46 Network V Firmware update ...... 16 Connection...... 14 VIERA Connect ...... 26 Setting ...... 15, 34 VIERA LinkTM “HDAVI I P ControlTM”...... 23 iPod/iPhone ...... 22 Pop-up menu ...... 20 W L Q Wireless LAN ...... 14 LAN...... 14 Quick Start ...... 36 24p ...... 29, 32 3D ...... 21

Information on Disposal in other Countries outside the European Union CAUTION This symbol is only valid in the RISK OF ELECTRIC SHOCK European Union. DO NOT OPEN If you wish to discard this CAUTION : TO REDUCE THE RISK OF ELECTRIC product, please contact your SHOCK, DO NOT REMOVE SCREWS. local authorities or dealer and NO USER-SERVICEABLE PARTS ask for the correct method of INSIDE. REFER SERVICING TO QUALIFIED disposal. SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

As an ENERGY STAR ® Partner, Panasonic has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. For Canada only: The word “Participant” is used in place of the word “Partner”.

Panasonic Consumer Marketing Panasonic Canada Inc. Company of North America, 5770 Ambler Drive Division of Panasonic Corporation Mississauga, Ontario of North America L4W 2T3 www.panasonic.ca One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com VQT3X51-2 F1211SB2022

Panasonic Corporation 2011 Printed in Malaysia