FORESTRY CRANES (Select Trailer from Trailer List, Cranes Can Be Ordered Separately)

Contents Forest-Master Mulching Flails ...... 4 SKIDDING GRAPPLES ...... 5 Timber grabs and Site Clearance Grabs for Loaders etc ...... 6 STROKE HARVESTERS, FELLING HEADS / ACCUMULATOR FELLING HEADS ...... 7 Kinetic 8x8 Forwarder ...... 8 ATV / UTV FORESTRY EQUIPMENT (Pictures) ...... 9 ATV / UTV FORESTRY EQUIPMENT ...... 10 SMALL FORESTRY TRAILERS WITH CRANES ...... 11 FORESTRY TRAILERS & CRANES SETS ...... 12 LARGE FORESTRY TRAILERS (Select crane from list) ...... 13 FORESTRY CRANES (Select trailer from trailer list, cranes can be ordered separately) ...... 14 LINKAGE MOUNTED WINCHES WITH MANUAL CONTROL ...... 15 LINKAGE MOUNTED WINCHES WITH ELECTRO-HYDRAULIC CONTROL ...... 16 Single & Double Drum...... 17 HYDRAULIC GEAR DRIVEN WINCHES ...... 18 Uniforest Savoy ...... 19 Domestic Log Splitters ...... 21 9 Ton Vertical Log Splitter ...... 22 10-11 Ton Vertical Log splitter ...... 23 12 ton Vertical splitters ...... 24 UF Titanium Log Splitters, 13, 16, 20, 25 Ton vertical ...... 25 ARB Splitter ...... 26 Horizontal Log splitters: 14, 18, 23, 30, 40 & 50 Ton ...... 27 Horizontal Log Splitters. 30 – 40 - 50 ton ...... 29 HORIZONTAL LOG SPLITTERS A 15 - 22 – 30 – 40 - 50 ton ...... 31 Horizontal log splitters Contractor SK15 / 20 / 24 / 30 & Pro 33 / 43 ...... 32 Split-Fire Splitters ...... 33 13 Ton Vertical trailed splitter ...... 34 Hydraulic Cone Splitters ...... 35 Logging Saw Benches ...... 36 Band Saws ...... 37 Log Conveyors ...... 39 WP30 & WP36 Firewood Processor (Pictures) ...... 40 WP30/36 Firewood Processor ...... 41 DUUN PROCESSORS 320 & 370X Processors ...... Error! Bookmark not defined. DUUN 420 PROCESSORS ...... Error! Bookmark not defined. UNIFOREST TITAN 40-20 PROCESSOR ...... 42 Billet Processors ...... 43 Python Billet Bundler ...... 44

Used correctly, it’s surprising what a small splitter will do but…….

The force needed to split wood varies a lot, so when choosing a log splitter consider the following. It’s not all about price but more about making the job as easy and quick as your budget will allow.

Vertical Log Splitters are usually used when you can lift the wood by hand and put it on a waist height table for splitting into logs. To make big wood easier to handle and lift onto a table, it is often cut into rings. Some of the vertical models have an adjustable table height that can also be removed so you can split long wood up to 110cm high. If it is a big diameter, the 12-14-16-18-25 ton models can have a lifting arm to stand the log up.

Horizontal Log Splitters are mainly designed for what we call Billeting, IE you take a 100cm log and split it into long Billets that you then season (dry).When the Billets are seasoned, you can cut them to the log length you want, hopefully with one of our saw benches, or saws and conveyors. However, you can place a number of rings in a row on a horizontal splitter and push the row through the knife. To do this, the rings must be cut parallel so they don’t fly off whilst splitting!

Horizontal log splitters can be specially ordered to take the log length the customer wants. For example, the A22OR could be with a 2 or 2.5 meter log length. Again, the Billet can then be cut to log length on a saw. Using this method you can also take large diameter timber and make it into Billets for a firewood processor. For example, if the firewood

processor takes a maximum diameter of 30cm timber, you can use something like a 30 Ton horizontal log splitter with 2

meter log length to make four 2 meter long Billets that can then be put through the 30cm firewood processor.

To help you decide what size log splitter you need, the following guide may help. It is based on splitting green, average /

good timber, the maximum length the splitter will take and with a single knife into two pieces. They will of course split bigger diameter timber but this is a general guide that will make sure you are happy with your log splitter even if you have bad timber: Vertical splitters Horizontal splitters 5 ton = 12cm diameter & 35cm long. 12 ton = 30-40cm diameter & 70-110cm long 8 ton = 20cm diameter & 55cm long. 14-16 ton = 40-60cm diameter & 70-160cm long 9 ton = 25cm diameter & 56cm long. 22 ton = 60-80cm diameter & 70-250cm long 11 ton = 30cm diameter & 70cm long. 30 ton = 60-100cm diameter & 100-250cm long 12-14 ton = 30-40cm diameter & 110cm long 40 ton = 60-120cm diameter & 100-300cm long 16-18 ton = 40-50cm diameter & 110cm long. 60 ton = 60-140cm diameter & 100-300cm long 25 ton = 50-80cm diameter & 110cm long. 100 ton = 60-200cm diameter & 100-300cm long

If the timber is very bad with lots of knots and twists, or is seasoned, then you will need more power for the diameter. Especially if it is seasoned hard wood such as Oak, as this becomes very hard to split.

When a vertical splitter is available with a 4 way knife, you should consider the following:

1) The 4 way is for splitting one log / piece of timber into four equal logs. 2) The timber should be nice and straight with no big knots 3) The timber should be straight grained and not all twisted.

So if the 4 way knife is for a 12 ton machine, then the maximum diameter is 30cm.

Information we need to offer advice on which log splitter is best for you: • Is it for commercial or private use? • What timber, i.e. hardwood or softwood? • What diameter? • What length do you usually cut your logs to? • Are you interested in electric, petrol engine, tractor powered by PTO or tractor powered by the tractor hydraulics? • If it is a tractor one, what model & horse power is it? • If it is electric do you have single phase or 3 phase electric at the place it is being used?

Forest-Master Mulching Flails

HEAVY FORESTRY MOWER WITH “CAGE” ROTOR

Mechanically driven by the PTO of the tractor (540 RPM or 1000 RPM – to be specified upon order) PTO shaft with free wheel included. Cuts material up to 10cm / 4 inches in diameter.

Mounted on the front or rear 3-point hitch Cut width Hammers Weight Kg £ 350 VD 110 V (on demand) (30hp+) 1.10 m 12 430 7.000,00 351 VD 150 MV (mechanical side shift) (40hp+) 1.50 m 17 560 7.500,00 352 VD 180 M (heavy gearbox) (70hp+) 1.80 m 20 620 9.000,00

Optional: Price £ 35-02 Height adjustable roll for VD 150 and VD 110 470,00 351-01 Hydraulic side shift for VD 150 MV 580.00 352-02 Height adjustable roll for VD 180 615,00 352-01 Hydraulic side shift for VD 180 M 580,00 351-03 Hydraulic heavy rear adjustable hood with 2 cylinders (tractor hydraulics) + 1.995 stronger housing (all models) 351-04 Mechanically adjustable bull bar with reinforced mowing head (all models) 1.510 35-05 Driven with 1000 RPM instead of 540 RPM 170,00 35-06 Front mounted, instead of rear mounted 170,00 35-07 Additional rubber protection together with the chain protection 405,00 35-03-07 Hydraulic rear hood, adjustable bull bar, reinforced mowing head 3,140

SKIDDING GRAPPLES

RRZ110 Skidding grapple. Heavy Duty, max tip to tip opening 1100 mm, minimum timber £ 1,370 diameter 100mm, gripping force 2500 kg free swinging, weighs 140 Kg, COWINCH-M Hydraulic winch mounted on above, 25m X 6mm cable, 445Kg pull, requires 1 £ 1,100 D/A valve. RRZ165 Skidding grapple. Heavy Duty, max tip to tip opening 1650 mm, minimum timber £ 1,870 diameter 100mm, gripping force 5000 kg free swinging, weighs 290 Kg, UF1300F Loader grapple. Heavy Duty, opening 70 - 130cm, 360 Hydraulic rotator with anti £ 2,530 swing brake, 12 volt diverter valve requires 1 DA service only, weighs 216 Kg, UF1800F linkage grapple. Heavy Duty, opening 80 - 180cm, manual spring return rotator, £ 2,420 requires 1 DA service, weighs 300 Kg UF1800F Loader / linkage grapple. Heavy Duty, opening 80 - 180cm, 360 Hydraulic rotator, £ 2,860 requires 2 DA service, weighs 343 Kg UF1800F Loader / linkage grapple. Heavy Duty, opening 80 - 180cm, 360 Hydraulic rotator, £ 3,020 12 volt diverter, requires 1 DA service, weighs 343 Kg UFSFS1800 Hydraulic winch with radio remote control. Cable size TBA £ 2,140

UFPRO 1 Skidding grapple. Heavy Duty, tip to tip opening 180cm, 9.5 ton gripping force, £ 2,970 60cm manual extension, 45 degree Hydraulic left / right slew, weighs 365 Kg, UFPRO 2 Skidding grapple. As above but with hydraulic extension as well as Hydraulic left £ 3,240 / right slew, weighs 380 Kg, UFPRO 3 Skidding grapple. As above but complete with control valves and levers, and £ 4,290 hydraulic rotator, weighs 405 Kg, UFSFS1800 Hydraulic winch & radio remote control. 30m X 8mm cable,1800Kg pull £ 2,140

Timber grabs and Site Clearance Grabs for Loaders etc

Loader grab DUTK105/Euro, timber gran with hydraulic top beak, Euro quick hitch A £ 1,350 standard, other hitch options available. 235Kg. Pallet fork Grab R54480000, sliding tines, removable hydraulic top beak (beak also B £ 1,250 available separately), Euro quick hitch standard, other hitch options available. B Pallet fork Beak R54480200, hydraulic beak with mounting & hoses, from above. £ ,650 Forest blade Grab R54836500, with hydraulic top beak, Euro quick hitch standard, other C £ 1,250 hitch options available. 235Kg Timber Grab. Twin hydraulic beaks. Suitable for Large 1.2 Mtr wide. £ 2,120 D Loaders, Tele-handlers, Loading Shovels. 1.5 Mtr wide. £ 2,225 1.8 Mtr wide. £ 2,585 Land Clearance Grab For Handling Timber, Rocks and Roots etc. 1.8 Mtr wide. £ 6,345 E Suitable for Large Loaders, Tele-handlers, Loading Shovels. 2.1 Mtr wide. £ 6,595 2.4 Mtr wide. £ 6,920 Grabs and Rotators for Cranes and Excavators

Standard grab Combi Grab Clamshell

Model Weight A B C D E F G Price JLGRAB & Rotator 25 + 10 700 tba tba tba tba tba 250 £ 850 TECTHL30 Grab 66 1065 660 395 305 460 65 310 £ 640 TETCTHLS30 Grab 68 1065 730 405 450 460 65 310 £ 712 UFGR1100 PRO 76 1100 430 50 320 £ 875 TETCHLS30 Combi 78 1065 730 430 450 460 65 600 £ 935 TECTP120 Grab 90 1200 770 450 480 510 65 355 £ 965 TECTP120 Combi 105 1200 770 450 480 510 65 700 £ 1,288 UFGR1300 PRO 94 1300 420 70 325 £ 1,050 UFGR1500 PRO 110 1500 480 70 350 £ 1,150 TECTP155 Grab 190 1550 960 620 630 600 65 430 £ 1,507 UFGR1800 186 1800 560 70 370 £ 1,250 AHTG28ST 304 1510 704 846 512 £ 3,450 AHTG42ST 440 1750 1057 1008 533 £ 4,665 COBUCKET50L 54 1191 363 NA NA 605 NA 396 £ ,950 COBUCKET60L 61 1191 363 NA NA 605 NA 496 £ 1,050

CO-ROTATOR tba 1 ton rotator plus £ 350 UFGR30PF tba 3 ton rotator plus 4 bolt flange adaptor £ 500 UFGR465 tba 4.5 ton rotator with 4 bolt fixing £ 595 UFGR603DSB tba 6 ton rotator with 6 bolt fixing £ 995 6

STROKE HARVESTERS, FELLING HEADS / ACCUMULATOR FELLING HEADS

Stroke harvester heads PRICE Accumulating felling heads PRICE Naarva S23 logging 9,550 Naarva S23C logging 10,550 Naarva E20 9,400 S23C Bluetooth system 3,900 Naarva E20Q 10,600 Naarva S25 12,900 Naarva E25 12,600 Naarva S25R 16,000 Naarva E25H 15,100 Felling heads Naarva E32 25,500 Naarva K20 8,850 Naarva E50 chainsaw 28,000 Naarva K25 9,100 Naarva K32 19,000 Naarva K50C chainsaw 24,000 Accumulating grippers and quick coupling for Naarva heads E20 accumulating grippers 1,900 E25 accumulating grippers 3,300 Quick coupling for Naarva 950 Cover for 5-pole connector 50

Naarva cutting guillotines Ø23 cm cutting unit 4,000 Ø25 cm cutting unit 4,000 Ø32 cm cutting unit (Ø100 mm cylinder) 4,800 Ø32 cm cutting unit (Ø90 mm cylinder) 4,800

Naarva controllers 5 buttons controlling 550 Radio controlling with mini transmitter 1,500 Radio controlling with external buttons 1,950 Radio controlling with external mini-buttons 2,400

Naarva programmable logic controllers PLC controlling with push buttons 1,200 PLC controlling with joys sticks 1,500

Naarva uprooters Naarva uprooter P16 4,500 Naarva uprooter P25 20,000 Naarva pole planting bucket 4,500

Extension booms Boom for 5-8 tn excavators 1,200 Boom for 10-20 tn excavators 3,900 Hydraulic extension boom 5,000 Rotators and links FR7-A25W25 590 FR10-W25A30 660 FR15-W30A30 870 FR15-W30B173 860 FR21-W35A35 1,050 FR21-W35B173 1,080 Black Bruin BBR15HD short link and 2 brakes 3,350 Black Bruin BBR15HD long link and 2 brakes 3,400 O-type link for FR7, FR10 and FR15 115 I-type link for FR7, FR10 and FR15 125 Link for FR21 rotator 105

Kinetic 8x8 Forwarder

Kinetic T8 Forwarder

Maximum load 3000 Kg Engine 26Hp (Yanmar diesel)

Axel 8x8 configuration

Transmission 4 : 1

Weight 1790Kg Without crane

Crane CO 470

Crane reach 4.7M

Crane eight (kg) 344

PRODUCT PRICE * Kinetic 8x8 diesel with Country crane 470 £38,000 ON / OFF control valve £ 395 Radio winch for crane 470 £ 1,046

Working LED lights on crane £ 398 Tipping dump body with tailgate £ 2,982 Clamshell bucket 60L £ 621 Reverse drive and braking (for driving machine when £ 1,059 seated in crane working position) Steel band tracks (1pair) £ 1,428 Loading area extension 80cm £ 347 Additional hydraulic outlet £ 308 Extension bolster pins (1pair) £ 45

Calix engine heater £ 298 (http://www.calix.se/en/products/engine-heaters Saw holder £ 89 Front windscreen with wiper £ 400

Clearplastic, zip in, roll down side panels £ 400 Full cab kit. £ POA * Excludes VAT but includes UK mainland delivery however a surcharge may apply for some area’s. Prices are subject to currency fluctuations and will only be binding on issue of a written quotation.

ATV / UTV FORESTRY EQUIPMENT (Pictures)

ATV / UTV FORESTRY EQUIPMENT

UT22181 Skidding arch with unique lift and tension system. £ ,710 UT22184 Skidding arch complete with rear axle carrier to keep tree off the ground £ 1,150 Timber trailer, 2 ply tyres, timber bolsters. UW 137Kg, GW 1000Kg UTPRO400 Options: Manual crane with mechanical winch or electric winch, radio £ 1,370 remote control, Scissor timber grab. Timber trailer, 4 ply tyres, timber bolsters. UW 150Kg, GW 1400Kg UTPRO600 Options: Manual crane with mechanical winch or electric winch, radio £ 1,590 remote control, Scissor timber grab. UT44319 Manual crane and winch. £ ,550 UT44286 Scissor timber grab. £ , 80 UT44347 Electric winch. 15M X 4.5mm cable, 1300Kg pull. £ ,740 UT74500 Radio remote control for winch. £ ,210 UTV / ATV, Quad tractor trailer with timber bolsters, removable tipping FRPHM150 body, Manual crane with mechanical winch. Optional electric winch and £ 1,920 optional timber grab. 340omm X 130mm X 1700MM, 1500Kg capacity.

Trailer, 1500Kg capacity, front gate, 2 pairs (4) bolsters . 22/11R8 tyres on rocking beam axle, 3.3 mtr crane with 0.08 grab & rotator, Valve with COT15-330 £ 6,050 Joystick levers for crane + single levers for legs etc. Additional 1m trailer length with pair of bolsters and sockets: £450 Radio remote control winch for crane. 25m X 6mm cable, 445Kg pull, COWINCH £ 1,400 30 m/min speed. Includes manual valve operation. COPOWER 5.5hp petrol engine power pack for mounting on ATV front rack £ 1,430

COT152WD Hydraulic 2 wheel drive kit, 5 km/h engaged, maximum 40 km/h disengaged, £ 1,980 12vlt Electric on / off control

COTTRACK Band tracks for use with or without hydraulic 2 wheel drive £ 1,040

COT154WD Hydraulic 4 wheel drive kit , 5 km/h engaged, 12vlt Electric on / off control £ 2,280

COAUGER Post hole auger for crane £ POA

COCLAM 50L 50L Clam shell bucket for crane £ ,930

SMALL FORESTRY TRAILERS WITH CRANES

1000 - 1500Kg, ladder chassis, adjustable axle, Head board, 4 pairs bolsters. JMS900UK 23 X10.50-12 tyres 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.2Mt £ 7,700 NSKCF1 crane, 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator. 2000Kg, ladder chassis, adjustable axle, Head board, 4 pairs bolsters. JMS900RAUK 23 X10.50-12 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.2Mt crane, £ 8,030 NSKCF1 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator. 3000Kg ladder chassis, adjustable axle, head board, 4 pairs bolsters. JMS1005UK 26-1200-12 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.2Mt crane, £ 8,800 NSKCF1 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator. 3000Kg ladder chassis, adjustable axle, head board, 4 pairs bolsters. JMS1005UK 26-1200-12 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.8Mt crane, £ 9,570 NSKCF2 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator. Optional Folding chassis £ ,330 Optional Brakes on two wheels £ ,440 Optional CF1 & 2 hydraulic extension with extra valve lever etc, 600mm £ ,820

3000Kg , capacity single beam trailer, head board, 3 pairs (6) bolsters. 10 / 80-12 AW tyres. ‘A’ type hydraulic legs & Headboard . 344Kg crane 3.7 + 1Mt COT30-470 £ 8,250 extension, 360 rotation, 370Kg at full reach, joystick valve block, grab, rotator. Optional: 300/65-12 wheels £350. Brakes on 2 wheels £575. 5000Kg , capacity single beam trailer, head board, 3 pairs (6) bolsters. 11.5 / 80-15.3 AW tyres. ‘A’ type hydraulic legs & Headboard . 373Kg crane 3.7 + 1Mt COT50-480 £ 8,800 extension, 360 rotation, 370Kg at full reach, joystick valve block, grab, rotator. Optional: 400/60-15.5 wheels £440. Brakes on 2 wheels £675. Optional Extra pair bolsters and sockets £ ,330 Optional 1 meter extension with extra bolsters and sockets £ ,440 Optional Rear light frame, number plate lights and folding outer lights £ ,300 Optional Operators platform on drawbar £ ,330 Hydraulic 2 wheel drive kit, 5 km/h engaged, maximum 40 km/h disengaged, COT302WD £2,470 12vlt Electric on / off control

FORESTRY TRAILERS & CRANES SETS

7000Kg* , capacity single beam trailer, head board, 3 pairs (6) bolsters. 300 / 80- ON7T – 15.3 10 ply AW tyres. 530Kg crane, 5.2 Mt, 480Kg** at full reach. 2 Joystick (one £ 8,800 ON52 twist) + 2 levers. 30Kn rotator. G16 timber grab. Gullwing or ‘A’ legs. Trailer: 400/60-15.5 £400. Brakes inside two wheels £390 or 4 wheels £650. Extra pair bolsters £280. Steering drawbar £500. Platform £275. Folding lights £250 Options Crane: PTO driven Hydraulic pumps: 60L £700, 80L £780. Hydraulic tanks 60L £360. Valves: seven individual levers. 2 Joystick and 3 individual levers.

10000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) ON10T - bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. £ 14,300 ON67S 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. A type legs. 10,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) ON10T – bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. £ 15,840 ON72 1,140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers . 40Kn rotator. G21 timber grab. A type legs. 12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) ON12T- bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 500/50-17 tyres £ 15,180 ON67S 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. A type legs. 12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) ON12T- bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 500/50-17 tyres £ 16,720 ON72 1140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. A type legs. 14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) ON14T- bolsters, brakes inside 2 wheels. 500/50-17 tyres £ 15,950 ON67S 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers . 30Kn rotator. G16 timber grab. A type legs.

14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) ON14T- bolsters, brakes inside 2 wheels. 500/50-17 tyres £ 17,930 ON72 1140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. A type legs.

14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) ON14T- bolsters, brakes inside 2 wheels. 500/50-17 tyres £ 18,700 ON83T2 1230Kg crane, 8.3 Mt (2 ext), 540Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. Trailer: 520/50-17 tyres. 550/45-22.5 tyres £1350. Hyd Brakes on four wheels £390. Air brakes on 4 wheels £1950. Frame extension £275. Extra pair bolsters £300. Platform £275. Folding lights £250 Cranes: PTO driven Hydraulic pumps: 60L £700, 80L £780. Options Hydraulic tanks: 60L (7-10T) £360. 80L (10-12T) £400. 100L (12-14T) £475 Valves: Electric on/off joysticks, Pilot operated joysticks with on/off. Proportional with mini electric joysticks for armrests. Radio remote control with belt mounted controls. * Capacity of trailer excludes crane weight which is stated in details above. ** excludes weight of grab and rotator which varies between 90-140Kg.

LARGE FORESTRY TRAILERS (Select crane from list)

7000Kg* capacity single beam trailer, head board, 3 pairs (6) bolsters. 11.5 / 80- ON7T 15.3 10 ply AW tyres. £ 3,850

Trailer: 400/60-15.5 £400. Brakes inside two wheels £390 or 4 wheels £650. Extra pair Options bolsters £280. Steering drawbar £500. Platform £275. Folding lights £250

10000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs ON10T (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. £ 6,820

12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs ON12T (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 500/50-17 tyres £ 7,700

12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs ON12T2WD (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres £ POA

14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs ON14T £ 9,350 (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres

12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs ON14T2WD (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres £ POA

Trailer: 520/50-17 tyres. 550/45-22.5 tyres £1350. Brakes inside four wheels £390. Frame Options extension £275. Extra pair bolsters £300. Platform £275. Folding lights £250

* Capacity of trailer excludes crane weight

FORESTRY CRANES (Select trailer from trailer list, cranes can be ordered separately)

NSKCF1 3.2M

ON67ST1 6.7M ON83T2 8.3M

All cranes come with joystick controls, grab & rotator. Lift capacities exclude grab & rotator NSKCF1 3.2m 3.2Mt, 360 rotation, 280Kg** at full reach £ 4,670 NSKCF2 3.8m 3.8Mt, 360 rotation, 360Kg** at full reach, £ 5,440 NSKCF1-2 EXT CF1 & 2 hydraulic extension with extra valve lever etc, 600mm £ ,80 NSKCF3 3.2m 3.2Mt, 360 rotation, 550Kg** at full reach £ 6,320 NSKCF3 4.2m 4.2Mt, 360 rotation, 400Kg** at full reach, £ 6,320 NSKCF3 EXT CF3 hydraulic extension with extra valve lever etc, 800mm £ ,820 NSKCF4 4.6m 4.6Mt, 360 rotation, 450Kg** at full reach, £ 6,980 NSKCF4 EXT CF4 hydraulic extension with extra valve lever etc, 800mm £ ,820 NSKCF1/2FL-H&L ‘A’ type hydraulic legs & Headboard for trailer mounting for KCF1 £ 640 & 2 cranes (replaces existing trailer Headboard) ‘A’ or ‘Gull wing’ type hydraulic legs with 3 point linkage tractor mounting for NSKCF1/2-3 POINT £ 860 KCF1 & 2 cranes. ‘A’ type hydraulic legs & Headboard for trailer mounting for KCF 3 NSKCF3/4FL-H&L & 4 cranes (replaces existing trailer Headboard) £ 860 ‘A’ or ‘Gull wing’ type hydraulic legs with 3 point linkage tractor mounting for KCF NSKCF3/4-3 POINT £ 1,080 3 & 4 cranes. 5.2 Mt, 480Kg** at full reach. Hydraulic controls: 2 Joystick (one twist) + 2 levers. ON52 30Kn rotator. G16 timber grab. £ 5,220 Options: G21 grab: £100. Trailer Gull wing legs: £900. Tractor ‘A’ legs: £1150 6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick + 4 levers. ON67ST1 30Kn rotator. G16 timber grab. Options: 2 joystick (2 twist) + 2 levers: £225. £ 6,980 40Kn rotator: £95. G21 grab: £100. Trailer Gull wing legs: £1650. Tractor + trailer ‘A’ legs: £1350. 7.2 Mt (1 ext), 700Kg** at full reach. Hydraulic controls: 2 Joystick + 4 levers. ON72T1 40Kn rotator. G21 timber grab. Options: 2 joystick (2 twist) + 2 levers: £225 G23 £ 9,020 grab: £150. G23 energy grab: £350. Trailer Gull wing legs: £1650. Tractor + trailer ‘A’ legs: £1350 8.3 Mt (2 ext), 540Kg** at full reach. Hydraulic controls: 2 Joystick + 4 levers. 40Kn rotator. G21 timber grab. Options: 2 joystick (2 twist) + 2 levers: £225 G23 ON83T2 £10,120 grab: £150. G23 energy grab: £350. Trailer Gull wing legs: £1650. Tractor + trailer ‘A’ legs: £1350 ** excludes weight of grab and rotator which varies between 90-140Kg Crane options: Electric on/off joysticks, Pilot operated joysticks with on/off. Proportional with mini electric joysticks for armrests. Radio remote control with belt mounted controls. PTO driven Hydraulic pumps: 60L £700, 80L £780. Hydraulic tanks: 60L (7-10T) £360. 80L (10-12T) £400. 100L (12-14T) £475

LINKAGE MOUNTED WINCHES WITH MANUAL CONTROL

ALL WINCHES ARE SUPPLIED AS STANDARD WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER WINDING ONTO THE DRUM, LESS FRICTION AND EASIER ON THE HANDS

UF30M 3 Ton, top pulley, 50 M of 9mm cable, PTO shaft. £ 1,590 UF35M 3.5 Ton, top & bottom pulley,70 M of 9mm cable, PTO shaft. £ 1,700 UF40 Eco 4 ton, top pulley, 60M of 10 cable, PTO shaft. £ 1,760 UF40E 4 Ton, top & bottom pulley, tow hitch, 70 M of 11mm cable, PTO shaft. £ 1,980 UF45M 4.5 Ton, top & bottom pulley, tow hitch,70 M of 11mm smooth cable, PTO shaft. £ 2,420 UF50Eco 5 Ton, top pulley, 60 M of 10mm cable, PTO shaft. £ 1,980 UF50E 5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm cable, PTO shaft. £ 2,420 UF55M 5.5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm smooth cable, PTO shaft. £ 2,860 UF65M 6.5 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft £ 3,740 UF85M 8.5 Ton, top & bottom pulley, tow hitch, 90 M of 13mm smooth cable, PTO shaft £ 4,290

Cable end & wedge (includes basic choker eye). T3 small cable / T1 large cable £ 25 - 28 Simple Choker slider 80 Grade £ 17.00 Swivel Choker slider 80 Grade £ 26.00 Swivel Choker slider 100 grade £ 33.00 Choker slider with pulley wheel for running on cable. £ 55.00 2.0 M Choker chain, 80 Grade, 7mm round £ 33.00 2.5 M Choker chain, 80 Grade, 8mm round £ 40.00 2.5 M Chocker chain, 80 Grade, 7mm square £ 42.00 2.5 M Chocker chain, 100 Grade, 7mm square £ 55.00 2.5 M Chocker chain, 100 Grade, 8mm square £ 62.00 3.0 M Chocker chain, 100 Grade, 8mm square £ 68.00 4 > 8 Ton Snatch block, side entry £ 165.00 6 > 12 Ton Snatch block, side entry £ 204.00 9 > 18 Ton Snatch block, side entry £ 303.00

9mm normal cable. 6X19 DIN.3058 1960N/mm2. Per meter £ 2.04 10mm normal cable. 6X19 DIN.3058 1960N/mm2. Per meter £ 2.32 11mm normal cable. 6X19 DIN.3058 1960N/mm2. Per meter £ 2.58 12mm normal cable. 6X19 DIN.3058 1960N/mm2. Per meter £ 3.12 8mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 3.30 9mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 3.44 10mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 4.50 11mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 5.14 12mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 5.78 13mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 5.98 15

LINKAGE MOUNTED WINCHES WITH ELECTRO-HYDRAULIC CONTROL

ALL WINCHES ARE SUPPLIED AS STANDARD WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER WINDING ONTO THE DRUM, LESS FRICTION AND EASIER ON THE HANDS UF40HPro 4 Ton, top & bottom,70 M of 10mm smooth cable, PTO shaft. £ 3,470 UF40HPro1 As above but with hydraulic cable unwinding. £ 3,630 UF45H 4.5 Ton, top & bottom pulley, tow hitch, 70 M of 10mm smooth cable, PTO shaft. £ 3,430 UF50HPro 5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm smooth cable, PTO shaft. £ 4,130 UF50HPro1 As above but with hydraulic cable unwinding. £ 4,400 UF55H 5.5 Ton, top & bottom pulley, tow hitch, 70 M of 10mm smooth cable, PTO shaft. £ 3,960 UF55HW As above but 180cm wide £ 4,130 UF55HPro As above but with hydraulic cable unwinding. £ 4,950 UF60EH 6 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft. £ 4,950 UF60EHW As above but 180cm wide £ 5,120 UF60HPro As above but with hydraulic cable unwinding. £ 5,830 UF65H 6.5 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft. £ 5,230 UF65HW As above but 180cm wide butt plate. £ 5,340 UF65HPro As above but with hydraulic cable unwinding. £ 6,160 UF80EH 8 Ton, top & bottom pulley, tow hitch, 90 M of 13mm smooth cable, PTO shaft. £ 5,450 UF80EHW As above but 200cm wide £ 5,500 UF80HPro As above but with hydraulic cable unwinding. £ 6,270 UF85H 8.5 Ton, as above but hydraulic control with wander lead £ 5,720 UF85HW As above but with 200cm butt plate. £ 5,890 UF85HPro As above but with hydraulic cable unwinding. £ 6,660 UF85HPro1 As above but with hydraulic hinged lower butt plate £ 7,200

Top swivel Hydraulic cable unwinding for 55-65-85H, standard on PRO models £ 880.00 Cable end & wedge (includes basic choker eye). T3 small cable / T1 large cable £ 25 - 28 Simple Choker slider 80 Grade £ 17.00 Swivel Choker slider 80 Grade £ 26.00 Swivel Choker slider 100 Grade £ 33.00 Choker slider with pulley wheel for running on cable. £ 55.00 2.0 M Choker chain, 80 Grade, 7mm round £ 33.00 2.5 M Choker chain, 80 Grade, 8mm round £ 40.00 2.5 M Chocker chain, 80 Grade, 7mm square £ 42.00 2.5 M Chocker chain, 100 Grade, 7mm square £ 55.00 2.5 M Chocker chain, 100 Grade, 8mm square £ 62.00 3.0 M Chocker chain, 100 Grade, 8mm square £ 68.00 4 > 8 Ton Snatch block, side entry £ 165.00 6 > 12 Ton Snatch block, side entry £ 204.00 9 > 18 Ton Snatch block, side entry £ 303.00 T60 Radio remote, 120mt range, 6 channel (in-out + stop + throttle control*) £ 880.00 T70 Radio remote, 200mt range, 8 channel (in-out + stop + throttle control* + Eng stop / start*) £1,100.00 TFA5 Radio remote, 500mt range, 8 channel (in-out + stop + throttle control* + Eng stop / start*) £1,090.00 *Additional radio remote control of engine rpm for manual engine throttles £ 320.00 *Additional radio remote control of engine stop / start £ 610.00 *Additional radio remote control of engine rpm for electronic engine throttles £ 610.00

Single & Double Drum Tractor Linkage winches for professionals

Standard fitting (excludes cable): Hydraulic cable unwinding (variable speed) Wire guide and pressure cylinder for more even winding on drum Foldable safety guard

Properties: Bevel and helical gear drive Highly efficient gear drive – minimal oil heating Separate hydraulic systems for the drum and the device for unwinding wire rope Separate drum control on double drum winches Multi-blade clutch constituted of four plates Compact and strong construction, chain saw and fuel tank holder Room for forestry chains and other small forestry equipment on the front side of winch 120G Model 65G1.72 65G1.92 85G1.92 85G2.10 2X65G 2X85G Power Pulling 6.5 ton 8.5 ton 6.5 ton 6.5 ton 8.5 ton 8.5 ton 12 ton force (per drum) (per drum) **Cable 165/13 130 - 12 160 - 11 115 -13 125 -12 130 -12 115 -13 Mt X MM 140/14 Weight 620 620 680 680 930 900 1000 (kg) Width) 1720 1720 1920 1920 2000 1920 1920 (mm) Power required 80+ 80+ 100+ 100+ 120+ 100+ 100+ (HP) Price £ 7,810 £ 8,030 £ 9,680 £ 10,010 £ 15,130 £ 13,200* £ 15,400

* 120G Power includes radio remote control. **Cable Choice per meter: ‘Smooth’ 11mm: £4.95. 12mm: £ 5.50. 13mm: £ 5.75 all + vat Radio remote control T70 (in-out + stop + throttle control* + Eng stop / start*) £ 900 + vat Additional radio remote control of engine rpm for manual engine throttles £ 295 + vat Additional radio remote control of engine rpm for electronic engine throttles £ 550 + vat

Hydraulic folding butt plate single drum 1.92m £ 720 + vat (£910 2.10m) Double drum 2.1m £ 940 + vat ALL WINCHES ARE SUPPLIED AS STANDARD WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER WINDING ONTO THE DRUM, LESS FRICTION AND EASIER ON THE HANDS 17

HYDRAULIC GEAR DRIVEN WINCHES

Pulling force – empty cable drum. kN 85 / 100 Pulling force – full cable drum. kN 50 Mean cable velocity m/s 0.48 – 0.9 Length of the cable (standard) 13 mm / 80m Optional cable sizes 13 mm / 90m 12 mm / 105m Recommended tractor power kW (HP) 60 (80) Width mm 800 + Depth mm 510 Height mm 600 Weight (without wire rope) kg 380 + Operating RPM min-1 540-1000 Oil pressure bar 100-130

Quantity of hydraulic oil l

Model 1 X 85H 2 X 85H 2 X 100EH Price £ 9,020 £10,450 £11,280 With standard cable length

The retail price is for the winch unit only. Fabrication of Butt plate or fitting to the tractor is designed to suit the tractor and is therefore charged additionally.

Uniforest Savoy Mini Cableway system

BASIC PACKAGE : £15.270,00 Winch 85HS-1,8m without rope, upper, lower station, manual hydraulic pump and remote controls.

Rope Ø 14mm: £3,00 /m Rope Ø 8 mm : £1,65 /m

Additional equipment to upgrade the basic package:

Mid station (shoe): £300,00 / pcs Tensioning device for rope: £430,00 Klem-plate - Screw plate for wire rope: £200.00 Pulley IF 6000: £210.00 Tightening belt 10t/20m: £200.00 /pcs Load belt 6t/3m: £45.00 /pcs

NB. The new Savoy is being launched January 2017 NNB: Price includes delivery but not assembly or training.

Domestic Log Splitters

6 & 7 ton Domestic log splitter Complete with wheels. Ajustable table.

HDTHLS-PLUS 240 volt 13 amp

HDTHPLS6TE HDTHPLS7TE HDTHPLS7P 240 volt 13 amp 240 volt 13 amp Briggs & Stratton Engine. Price TON Max Log mm HP + vat HDTHLS-PLUS 240vlt electric 6 520 £320 HDTHPLS6TE 240vlt Electric 6 1072 £470 7 1040 4 £600 HDTHPLS7TE 240vlt Electric HDTHPLS7P Petrol engine 7 1040 6.5 £780

9 Ton Vertical Log Splitter Vertical log splitter for tractor hydraulics.

Price TON Max Log HP + vat COLSOV9PI 9+* 550mm na 790 tractor hydraulics This is not a cheap and cheerful splitter. It has been built to the same high standards of all our splitters and has the following features: Full size cutting wedge. Replaceable ’Oil-Lite’ slide bushings on cutting wedge. Two speed controls. Auto return, Full safety guarding etc in compliance with all EC regulstions. * The perforamce depends on the hydraulic pressure and flow avaiable from the tractor. 2500psi will give arond 9 ton of force whilst a flow rate of 25 litre per minute will give a good operating speed..

10-11 Ton Vertical Log splitter Complete with wheels.

Max Log Fixed large table TON HP Price Length cm COLLASO100PI 10 53 NA 1,050 tractor hydraulics. COLLASO100C 10 53 NA 1,270 tractor PTO COLLASO100EM 240vlt Electric 10 53 3 1,370

Double pump COLLASO100

Petrol engine. 10 53 6.5 1,650 Double pump

Max Log Adjustable height small table TON HP Price Length cm COLLASO100EM-TR Adjustable table 10 55-78-110 3 1,540 240vlt Electric. Double pump COLLASO100-TR adjustable table 10 55-78-110 6.5 1,980 Petrol engine. Double pump

OPTIONALS Four way Blade ( 11 ton model only) 95 Quick split wide blade ( 11 ton model only) 80

12 ton Vertical splitters

2 speed & auto return. Wheels for easy moving. 70cm Table height.

Optional Tubular table extension. TON Max Log mm HP Price

COLPROFY12PI tractor hydraulics 12 500 / 1,320

COLPROFY12PC tractor PTO 12 500 25 1,540

COLPROFY12EM 240volt electric with double pump. 12 500 3 1,640

COLPROFY12SB petrol engine 12 500 9 2,190 with double pump.

Options

Extension for table (now plate not tube) 200 Four way knife 130

UF Titanium Log Splitters, 13, 16, 20, 25 Ton vertical

Model PTO and PTO 3 Phase 3 phase

UF14 (13 ton) £2,420 £2,640 £3,020

UF18 (16 ton) £2,750 £3,240 £3,630 UF20 (20 ton) £3,130 £3,410 £3,790 UF25 (25 ton) £3,570 £3,850 £4,340

Extra’s UF14 UF18 UF20 UF25 Log table* £130 Na NA NA Two height table - £125 £125 £125 with side extension 4-way knife £150 £160 £170 £180 Hydraulic winch & - £1,150 £1,150 £1,150 remote Scissor grab - £100 £100 £100 PTO shaft SP4636 £100 SP4636 £100 SP13154 £150 SP13154 £160 Specification: 1090mm max log height. Two speed ram (Auto speed on 25T). Auto return knife ram with override stop if you want to stop the knife from returning. Removable table, 56cm standard height, other heights by request. LH side arm, RH timber lifter / side arm. Adjustable knife return stop.

ARB Splitter • Adjustable stroke and automatic return. • 14 / 18 ton splitting force with automatic 2 speed on 18 ton. • Log length capacity of 65cm or 110cm. • IVA compliant for high speed road transportation. • Petrol engine from 9 / 13hp with high speed dual hydraulic pump and large oil tank/s for maximum cooling and long work period. • Folding Log deck. Allows debris to fall through for cleaner logs. Prevents logs falling on the ground so it is easy to feed Billets / logs through again. • Optional drop on 4 way knife. • Prices start from £4,350 + Vat for the 14 ton 65cm stroke.

NB. Model shown is yard tow with drawbar removed. Road tow model has sprung axle, mudguards, lights etc.

Horizontal Log splitters: 14, 18, 23, 30, 40 & 50 Ton Adjustable stroke, Automatic return, automatic two speed (18 upwards) 2 way Blade. Tractor hydraulic or PTO. Petrol engines (14 to 23). 240volt (14T) & 380 volt (14 to 50T)

Standard log sizes of 700mm or 1100mm with option to increase in 500mm increments.

NEW OPTIONS

Side mounted PTO for crane loading. Remote hydraulic operation from cab.

SM Petrol engine model has a double hydraulic pump. All other models have single hydraulic pump as standard. Double pump is extra £250 + vat.

Ton Log mm HP Price A14 OR/650 PI Tractor 14 700+ / 1,650

A14 OR/650 C Tractor PTO 14 700+ 30 1,980 A14 OR/650 EM 240vlt Electric 14 700+ 3 2,700 A14 OR/650 ET 415vlt Electric 14 700+ 5,5 2,700

A14 OR/650 MS Petrol Engine double pump 14 700+ 9 2,810 A14 OR/650 SD Diesel Engine 14 700+ 12 4,010

A14 OR/1.060 PI Tractor Hydraulics 14 1.100+ / 1,760 A14 OR/1.060 C Tractor PTO 14 1.100+ 30 2,250

A14 OR/1.060 EM 240vlt Electric 14 1.100+ 3 2,860 A14 OR/1.060 ET 415vlt Electric 14 1.100+ 5,5 2,860 A14 OR/1.060 MS Petrol Engine double pump 14 1.100+ 9 2,920

A14 OR/1.060 SD Diesel Engine 14 1.100+ 12 4,120

A18 OR/650 PI Tractor Hydraulics 18 700+ / 1,980 A18 OR/650 C Tractor PTO 18 700+ 40 2,310 A18 OR/650 ET 415vlt Electric 18 700+ 5,5 2,910 A18 OR/650 MS Petrol Engine double pump 18 700+ 6 3,020 A18 OR/650 SD Diesel Engine 18 700+ 12 4,230

A18 OR/1.060 PI Tractor Hydraulics 18 1.100+ / 2,090 A18 OR/1.060 C Tractor PTO 18 1.100+ 40 2,470 A18 OR/1.060 ET 415vlt Electric 18 1.100+ 7,5 3,020 A18 OR/1.060 MS Petrol Engine double pump 18 1.100+ 13 3,350 A18 OR/1.060 SD Diesel Engine 18 1.100+ 12 4,340 A18 OR/1.060 CA Tractor PTO and 700Kg winch 18 1.100+ 40 4,450 28

Horizontal Log Splitters. 30 – 40 - 50 ton Hydraulic 2-4 Way Blade, solid axle

Standard distance from pusher to blade is 110cm with option to increase in 500mm increments. Double hydraulic pump fitted on all models as standard.

Model Ton Log mm HP Price A23 OR/1.060 PI Tractor Hydraulics 23 1.100+ / 2,750

A23 OR/1.060 C Tractor PTO 23 1.100+ 85 3,410

A23 OR/1.060 ET 415vlt Electric 23 1.100+ 7,5 4,180 A23 OR/1.060 SB Petrol Engine 23 1.100+ 13 4,400

A23 OR/1.060 CA Tractor PTO 23 1.100+ 85 5,390 and 700Kg winch A23 OR/1.060 SD Diesel Engine 23 1.100+ 12 5,830

Model Ton Log mm HP Price A30 OR/1.500 C Tractor PTO 30 1.500 85+ 6,820 A30 OR/1.500 ET 415vlt Electric 30 1.500 15 7,540 A30 OR/1.500 ET / C 415vlt Electric + PTO 30 1.500 15+85+ 8,030

A40 OR/1.500 C Tractor PTO 40 1.500 85+ 7,920

A40 OR/1.500 ET 415vlt Electric 40 1.500 20 8,580 A40 OR/1.500 ET / C 415vlt Electric + PTO 40 1.500 20+85+ 9,130

A50 OR/1.500C Tractor PTO 50 1.500 85+ 9,020

A50 OR/1.500 ET 415vlt Electric 50 1.500 20 9,680

A50 OR/1.500 ET / C 415vlt Electric + PTO 50 1.500 20+85+ 10,230

Drop on Cross-shaped knife for A14, A18 & A23 270 Oil cooler, 12 volt, flow up to 70 litres (A14 to A23) 500 Oil cooler, 12 volt, flow up to 110 litres (A30 to A50) 660

PTO shaft, SP4636, 360-520MM, 35HP 100 PTO shaft, SP13154, 660-1220MM, 47HP 150 PTO shaft, SP13157, 920-1440MM, 64HP 210 PTO shaft, SP13586, 960-1620MM, 95HP 230 Detached hydraulic pump 100 3-point linkage attachment (EM-ET-SB-SD) 330

Solid Axle upgrades Solid axle for 14 - 18 – 23 models 270 Sprung axle for 14 - 18 – 23 models 380 Road Tow IVA compliant (A14-18 ONLY) additional cost to above 440 Sprung axle for 30 – 40- 50 ton models NA

Machine mounted on legs 14 - 18 – 23 models 270 30 – 40 - 50 ton models FOC

Hydraulic side loading For machine on ground A14/18/23 1,210 For machine on legs or axle A14/18/23 1,870

Hydraulic knifes & tables 14 / 18 and 23 ton, 2-4 way: 1,210 30 / 40 / 50 ton machines (deduction for no hydraulic knife): 770 30 / 40 / 50 6 way: 1,100 Folding end table after knife: 640

Hydraulic winch All models 1,100

Remote control All models (Tractor spool to two lever controls on splitter) 270 All models (Radio remote one channel IE. splitter) 2,150 All models (Radio remote two channel IE. splitter & knife) 3,240 Wireless control for winch on. 880

Extended splitting length (ram and bed) A14-18 price per extra 500mm ram and bed length. 550 A23 price per extra 500mm ram and bed length. 880 A30 – 40-50 , price per extra 500mm ram and bed length 1,210

Log grippers for CA 190

SPECIAL ORDER HORIZONTAL LOG SPLITTERS A 15 - 22 – 30 – 40 - 50 ton

Horizontal log splitters Contractor Pro 33 / 43

• 33 & to 43 ton splitting force, automatic return and 2/4 way knife • Log length capacity 125CM 35 & 45 ton.

Log Length Ton HP Price Model mm PRO 33OR1.250C (Hyd adjustable 2/4 blade, log table, hyd loading) 33 1250 60 8,520

PRO 33OR1.250ET (Hyd adjustable 2/4 blade, log table, hyd loading) 33 1250 12.5 8,520

PRO 43OR1.250C (2 speed Hyd adjust 2/4 blade, log table, hyd loading) 43 1250 75 9,800

PRO 43OR1.250ET (2 speed Hyd adjust 2/4 blade, log table, hyd loading) 43 1250 12.5 9,800

PRO33-43 standard specification + Hyd 4 way

PRO33-43 Options 3 Phase electric motor kit to combine with PTO drive 1,800 2 speed valve for two speed splitting Pro 33 (standard on PRO43 330 Smaller pump for lower hp tractors (will reduce cycle times) 550 6 way knife 660 Table on 2-4 way knife cross blade 330

PTO shafts for all models

PTO shaft, SP13154, 660-1220MM, 47HP 150 PTO shaft, SP13157, 920-1440MM, 64HP 210 PTO shaft, SP13586, 960-1620MM, 95HP 230

Split-Fire Splitters

3 PT Hitch (Choice of short or tall top link bracket) Code Product Price (£) 2203 3PT PI 16 Ton 2 way knife 992 3203 3PT PI 20 Ton 2 way knife 1,150 3403 3PT PI 20 ton 2 + 4 way knife 1,350 4203 3PT PI 32 ton 2 way knife 1,500 4403 3PT PI 32 ton 2 + 4 way knife 1,800

Self-Contained (Excludes axels & Drawbar – see options) Code Product Price (£) 2265 16 Ton, 2 way knife, GX200 (5-5.8hp) & pump kit 2,100 3265 22 Ton, 2 way knife, GX200 (5-5.8hp) & pump kit 2,250 3465 22 Ton, 2+4 way knife, GX200 (5-5.8hp) & pump kit 2,460 4290 32 Ton, 2 way knife, GX270 (6.8-8.4hp & pump kit 2,950 4490 32 Ton, 2 + 4 way knife, GX270 (6.8-8.4hp) & pump kit 3,250

Options Price (£) PTO Kit (new cross bar with tank etc, PTO pump) 1,010 Log Lifter (includes additional DA valve) 495 5.0-10 wheel assembly on solid axle, draw bar 500 5.0-10 wheels, Suspension axles, mudguards, light board, IVA etc 950 Honda GX200 (5-5.8hp) & pump kit if ordered later 1,110 Honda GX270 (6.8-8.4hp) & pump kit if ordered later 1,467 Cat 1 3PT Hitch Upright (16" high) if ordered later 41 Cat 2 3PT Hitch Upright (24" high) 51

13 Ton Vertical trailed splitter

Model Road Tow Honda GX270 engine UFBMF14 (13 ton) £4,240 + vat 4-way knife £150 Timber lift £150 Specification: 1090mm max log height. Two speed splitting on the control levers. Double hydraulic pump. LH side arm. Adjustable knife return stop. Removable table, 56cm standard height, other heights by request Auto return knife ram with over-ride stop if you want to stop the knife from returning. Hydraulic tilt between transport and work.

Hydraulic Cone Splitters

Machine Recommende Dimensions Max d machine Weight Kg Log length Oil Flow Oil Pressure Model cm Log weight H X W X D diameter M1 – 70 cm 1000 -3500 kg 90 85 x 32 x 36 1-2 meters 15/50L 200 -230 bar 4.0/4.7Roli M1 – 10Roli 130 88 x 25 x 25 1-2 meters 90 cm 2500 -8000 kg 30/80L 170 -200 bar M1 – 90 cm 2500 -7000 kg 135 110 x 36 x 45 1-2 meters 30/80L 170 -230 bar 4.0/4.7K M2 – 4.0/4.7 90 cm 3000 – 7000 kg 170 110 x 36 x 45 1-4 meters 50/80L 170-230 bar M M2 – 4.0/4.7 100 cm 4000-10000 Kg 220 136 x 47 x 56 1-4 meters 50/80L 170-230 bar KS M2 – 110 cm 5000-15000 Kg 290 136 x 47 x 56 1-4 meters 65/130L 170-230 bar 4.0/4.7S M3 – 150 cm 7000-20000 Kg 400 136 x 47 x 56 1-5 meters 90/170L 170-230 bar 4.0/4.7S M5 – 240 X 92 X 200 cm 10000- 600 1-7 meters 120/250L 230-270 bar 4.0/4.7S 92 25000Kg

To fit onto 360 excavators, Back-hoes, Skid Steers, Loading Shovels, Tractor loaders, Cranes, Forwarding trailers and many other applications. Retail price includes mounting bracket, pins and hoses with blank ends as per picture ‘A’ above.

M1 – 4 Roli From: £ 2,600 + Vat. M1 – 10 Roli From: £ 3,980 + Vat. M1 – 4 K From: £ 5,930 + Vat. M2 – 4 K/M From: £ 8,700 + Vat M2 – 4 KS From: £ 9,845 + Vat. M2 – 4 S From: £ 10,460 + Vat. M3 – 4 S From: £11,720 + Vat. M5 – 4 S From: £18,980 + Vat.

Hardened Cone for M2 and M3S models From; £1,000 60,70,80,100,120,152,229,305,457mm augers From: £965-1,495. Auger 120cm exten £640. Adaptor for auger mounting (not req for Roli) £1,495 35

Logging Saw Benches

Rocking trough logging saws with tungsten tipped saw blades. COLSCM70EMPD

COLSCM60LIGHT COLSCM70SB-NT250I4

COLSCM70MS IVA road tow

COLSCM70CPRO-PLUS

UFSCD/700 C/NT

COLSCM70CMSPRO-PLUS

All saws have Tungsten tipped 70cm blade. PTO shafts extra. Pro models have trough extension, log grip, fixed log length guide, wheels. Pro-Plus models have trough extension, safety cut lever + log grip, Blade guard, adjustable log length guide, trough front roller, bearings on the trough pivot, two handles, wheels, sawdust deflector. Max Log OD HP Price £ COLSCM60LIGHT 240vlt* Electric direct drive, wheels and handle 23cm-9” 3 795 COLSCM70EMPD 240vlt* Electric direct drive, wheels and handle 28cm-11” 3 1175 COLSCM70EM 240vlt* Electric belt drive, wheels and handle 28cm-11” 3 1275 COLSCM70CPROET 415vlt Electric belt drive, trough ext, wheels, log cut length guide . 28cm-11” 5,5 1325 COLSCM70CPRO tractor pto drive 28cm-11” / 1150 COLSCM70CPRO-PLUS tractor pto drive 28cm-11” / 1350 COLSCM70CMSPRO-PLUS 9hp Petrol engine 28cm-11” 9 2150 COLSCM70MSPRO-PLUS-IVA Petrol Engine, IVA road tow . 28cm-11” 9 2400 COLSCM70CPRO-NT25014 Tractor PTO drive . 4mtr Telescopic conveyor tractor Hyd 28cm-11” / 2800 COLSCM70SBPRO-NT250I4 Petrol Engine, 4mtr Telescopic conveyor tractor Hyd 28cm-11” 13 3750 UFSCD/700 C/NT 4/250 PI Trough ext, log cut length guide, PTO drive, 30cm -12” / 3200 4MTR Telescopic Elevator from tractor Hyd UFSCD/700 C/NT 4/250 ET 360vlt Trough ext, log cut length guide, 30cm -12” 5.5 +1. 3700 4MTR Telescopic Elevator

* Requires a suitable 16 amp power supply and lead. It is not 13 amp. OPTIONAL Extras PTO shaft, SP4636s, 360-520MM, 35HP 100 Wheel Kit & Tow Bar (Only for COLSCM70SB-NT250I4) 440 Log grip handle for fitting to log trough (incl on COL models) 95 Replacement 600mm blade 180

Band Saws

Max cutting Table POWER & Height cm MODEL Dimensions in cm Height Price (£) SOURCE Weight Kg Height Length CM SN440 EM 3HP 240vlt 29 43 91 182 x 150 1,690 SN440ET 3HP 415vlt 29 43 91 182 x 150 1,690 SN520EM 3HP 240vlt 38 50 91 202 x 200 1,940 SN520ET 3HP 415vlt 38 50 91 202 x 200 1,940 SN620EM 3HP 240vlt 42 61 92 217 x 260 2,180 SN620ET 3HP 415vlt 42 61 92 217 x 260 2,300 SN620C Tractor pto 42 61 92 217 x 270 2,300 SN620C-ET PTO + 42 61 92 217 x 285 2,780 3HP 415vlt SN720ET 3HP 415vlt 48 70 93 237 x 320 2,750 SN720C Tractor pto 48 70 93 237 x 320 2,900 SN720C-ET PTO + 48 70 93 237 x 335 3,430 3HP 415vlt

OPTIONS PTO shaft, SP4636s, 360-520MM, 35HP 100 Log holding / grip with sliding trough 340

Precision blade guide with rollers 70-80 130

Sold axle and tow hitch 650

Replacement 700mm blade 200

Logging Saw Benches with 15 ton Horizontal splitter

Rocking trough logging saws with tungsten tipped saw blades & 28cm diameter cut. 4 meter telescopic / folding conveyor. Long timber extension with rollers. Log grip handle and safety lever on trough for two handed cutting. 15 ton horizontal splitter with adjustable 4 way knife.

Standard model: PTO gearbox drives the saw via 3 belt drive & log splitter via pump + self contained hydraulic tank. Conveyor belt runs from tractor hydraulics

Optional: PTO gearbox drives the saw via 3 belt drive & log splitter and conveyor via pump &self contained hydraulic tank.

Price COLCOMBY 2010 T.S.C.4. standard saw + conveyor + 15 ton splitter 4,780

COLCOMBY.500.002. Upgrade of internal pump etc for hydraulic conveyor. 460

PTO shaft 100 COLCOMBY.500.016 Wheel and drawbar kit for towing off road. 440 COLCOMBY.500.017 Hydraulic adjustable 4 way knife. 760 COLCOMBY.500.0120 Conveyor belt in 3 parts so you can reduce conveyor height 390

Log Conveyors

Telescopic conveyors All models with tow bar and wheels. They are supplied in a wooden crate for partial home assembly.

Length Width HP Price

NT 4/250 PI Tractor Hydraulics 4 Mtr 250mm / 2250

NT 4/250 EM 240vlt Electric 4 Mtr 250mm 1 2350

NT 4/250 ET 415vlt Electric 4 Mtr 250mm 1 2350

NT 4/250 SB Petrol Engine 4 Mtr 250mm 9 3450

NT 5/250 PI Tractor Hydraulics 5 Mtr 250mm / 2350

NT 5/250 EM 240vlt Electric 5 Mtr 250mm 1 2450

NT 5/250 ET 415vlt Electric 5 Mtr 250mm 1 2450

NT 5/250 SB Petrol Engine 5 Mtr 250mm 9 3300

NT 4/400 PI Tractor Hydraulics 4 Mtr 400mm / 2550

NT 4/400 EM 240vlt Electric 4 Mtr 400mm 1 2650

NT 4/400 ET 415vlt Electric 4 Mtr 400mm 1 2650

NT 4/400 SB Petrol Engine 4 Mtr 400mm 9 3375

NT 5/400 PI Tractor Hydraulics 5 Mtr 400mm / 2750

NT 5/400 EM 240vlt Electric 5 Mtr 400mm 1 2850

NT 5/400 ET 415vlt Electric 5 Mtr 400mm 1 2850

NT 5/400 SB Petrol Engine 5 Mtr 400mm 9 3950

WP36 Firewood Processor

WP36TR

WP30TR

Optional

6 way knife

WP36IVA

Standard

Slewing conveyor

Optional Timber loader

WP36 Firewood Processor

Hydraulic in-feed and hydraulic conveyor out-feed. Technical data WP 36-8 WP 36-10 Gross cutting by chain saw, inch 36cm 36cm Drive of chainsaw Hydraulic Hydraulic Normal splitting action / minute, 30 cm length 1.5s 1.5s Rapid splitting action / minute, 30 cm length 1.0s 1.0s Splitting force in ton and knife type 8 ton, 2 & 4 way knife 10 ton, 2 & 4 way knife Max. Stem diameter, cm 36cm 36cm Max. Length of split wood 60cm 60cm Conveyor belt width & length, cm 24cm X 4 mt 24cm X 4 mt Slewing conveyor Yes Yes Drive of conveyor hydraulic Hydraulic Weight, kg 520kg 540kg Power requirement, kW 7,5Kw 7.5Kw

Tractor linkage mounted models £ WP36TR 8 36CM max cut diameter, 60cm max log length, 8 ton splitting, 2-4 way splitting knife, Power in-feed, 4mtr Folding & slewing conveyor, Linkage mounted, PTO driven £ 8,250 hydraulics. WP36TR 10 36CM max cut diameter, 60cm max log length, 10 ton splitting, 2-4 way splitting knife, Power in-feed, 4mtr Folding & slewing conveyor, Linkage mounted, PTO £ 8,700 driven hydraulics.

Road Tow models with full IVA approval. WP36TR-IVA 8. 36CM max cut diameter, 60cm max log length, 8 ton splitting, 2-4 way splitting knife, Power in-feed, 4 meter Folding & slewing conveyor, tractor linkage mounting, £11,440 PTO + 13hp Honda engine. Note ring hitch fitted for IVA compliance. WP36TR-IVA 10. 36CM max cut diameter, 60cm max log length, 10 ton splitting, 2-4 way splitting knife, Power in-feed, 4 meter Folding & slewing conveyor, tractor linkage mounting, £11,900 PTO + 13hp Honda engine. Note ring hitch fitted for IVA compliance.

WP30-36 Optional Extras. These can be retro fitted to standard PTO machines PTO shaft,, 360-520MM: SP4636 £100 13HP Honda engine kit for WP30TR PTO model (standard on WP30IVA) £1,540 13HP Honda engine kit for WP36TR PTO model (standard on WP36IVA) £1,650 Electric start for petrol engine (not available for WP30 IVA due to weight) £880 3 Phase 7.5Kw electric motor (not available for WP30 IVA due to weight) £1,650 6 way knife in addition to standard 4 way: FAWP55306415 £470 8 way knife in addition to standard 4 way: FAWP200000118 £580 Hydraulic adjustment of splitting knife: FAWP 55306870 £1,210 Timber lifter, lifts full lengths onto in feed: FAWP55306400 £600 Two handle splitting levers for using splitter without saw: FAWP55306690 £280 Yard Tow kit (not for highway use) axle, hitch, stand (no mudguards or brakes) £750 Spare wheel for IVA axle kit or yard tow kit. £95 Linkage extensions may be required on some tractors when combining PTO and electric or £220 petrol engine power source. Oil cooler kit for hydraulic system: FAWP55306680 £780

UNIFOREST TITAN 40-20 PROCESSOR

(200kN) – 20T

Titan 40-20 PTO with 2/4 way knife: £16,770 Telescopic 5mtr conveyor: £ ,390 200/60-R14.5 Wheels and tow bar: £ 1,100 Timber lift with adjustable length: £ 1,760 Hydraulic oil cooler: £ ,440

Knife options: 2/6 way: £ ,440 2/12 way: £ ,530

Billet Processors

The Riko Rotomat Billet processor is a supper fast and efficient machine for cutting Billets into logs. The design ensures simplicity of use whilst maintaining operator safety. The method of use is as simple as it is ingenious: there are 4 tubular compartments built into a rotating drum, the billet lengths are simply dropped into each chamber as it rotates. As the drum rotates each billet drops down a preset amount and is then held by a serrated grip arm. A Tungsten tipped circular saw blade then cuts the Billet and the cut log is discharged into the area above the conveyor belt (Hydraulic slew from May 2015). As the drum continues to rotate the next Billet is cut and each Billet drops down further ready to be cut on the next rotation. This process continues as the drum rotates and it is simply a case of placing another Billet in the tubular compartments as the drum continues to rotate. The Riko Rotomat Billet Processor ensures:- PYTHON BILLET BUNDLER Fast & Simple Processing of Billets. Technical data Rotomat 5 (incl 6km/h Axle) Rotomat 4 3 Phase © : £14,250 3 Phase © : £10,750 Price with conveyor PTO © : £14,500 PTO © : £10,800 CE : £15,500 CE : £10,200

Road Tow kit with own engine Diesel: £ TBA Petrol 13hp & PTO: £4,200 4.5M £2,100 Price deduction for no Conveyor (net) 4.5M £1,900 5.5M £2,300 PTO shaft SP4636S £ 90 £ 90 Variable speed control for conveyor £ ,260 £ ,260 20cm £ 350 20 & 50cm £ ,450 Extra drums for different log lengths 50cm £ 450 (Pre May 2015 models) Dimensions L / W / H (cm) 350/240/180 320/170/160 Weight (kg) 1,500 990 Number of Billet Chambers 5 4 Max diameter wood Round wood (cm) 17 16 Maximum diameter of Billet wood (cm) 25 24 Possible cutting lengths (cm) 20/25/33/50 * 20/25/33/50 * (20 to 40cm**) Max log length (cm) 120 100 Maximum number 72 68 of cuts / minute Power (kW) / voltage (V) 11/400 11/400 Tractor PTO HP**8 24 / 45 24 / 45 * standard: 25 & 33 cm. Optional: 20 & 50cm. ** May 2015 model. **with tractors under 45HP a drawbar & wheel kit may be required

Python Billet Bundler

Details Price Log Length 100 cm Volume 1 meter

Width 140 cm £ 1,490 Height 120 cm Length 120 cm Weight 200 Kg

Polyester band 500m X 19mm £60 Band bobbin. £60 Portable with brake Band clips 500 £50

Band tensioner incl Chain ratchet tensioner £110 Also available with hydraulic tip and front loader mount +£330+vat

RIKO UK LTD & ALPINE TRACTORS LTD 44

TERMS AND CONDITIONS FOR THE SALE OF GOODS

1. Definitions: Buyer the person who buys or agrees to buy the goods from the Seller. Seller means Riko UK Ltd or Alpine Tractors Ltd. Conditions the terms & conditions of sale as set out in this document & any special terms & conditions agreed in writing by the Seller. Goods the articles which the Buyer agrees to buy from the Seller and listed on the sellers sales order, pro-forma invoice or invoice. Price the price for the Goods, excluding VAT and any carriage, packaging and insurance costs.

2. Conditions 2.1 These Conditions shall form the basis of the contract between the Seller and the Buyer in relation to the sale of Goods, to the exclusion of all other terms and conditions including the Buyer’s standard conditions of purchase or any other conditions which the Buyer may purport to apply under any purchase order or confirmation of order or any other document. 2.2 All orders for Goods shall be deemed to be an offer by the Buyer to purchase Goods from the Seller pursuant to these Conditions. 2.3 Acceptance of delivery of the Goods shall be deemed to be conclusive evidence of the Buyer’s acceptance of these Conditions. 2.4 These Conditions may not be varied except by the written agreement of the Seller. 2.5 These Conditions represent the whole of the agreement between the Seller and the Buyer. They supersede any other conditions previously issued.

3. Price The Price shall be the price shown on the sales order or invoice at the time of payment in full or any order confirmation payment. Unless otherwise stated on the invoice or sales order the price will be inclusive of VAT and delivery.

4. Payment and Interest 4.1 Unless otherwise agreed in writing by the supplier the buyer is to make a 20% order confirmation payment to order the goods with the balance due cleared funds prior to delivery / collection. The goods referred to on the sales order or invoice will only be considered as ordered on receipt of the required order confirmation payment. The order confirmation payment is non-refundable but with written agreement from the seller may be transferable to an alternative order or sale. 4.2 The Seller reserves the right to charge interest on overdue invoices which shall accrue from the date when payment becomes due calculated on a daily basis until the date of payment at the rate of 10% per annum above the Bank of England base rate from time to time in force. Such interest shall accrue after as well as before any judgment. 4.3 The Buyer shall pay all accounts in full and not exercise any rights of set-off or counter-claim against invoices submitted by the Seller.

5. Goods 5.1 The quantity and description of the Goods shall be as set out in the Seller’s quotation. 5.2 Any alterations or additions to the buyer’s original order and the Seller’s original quotation may be subject to further invoicing whether or not the Buyer has requested a written re-quotation.

6. Warranties .The warranty provided by the seller is as per the warranty offered by the manufacture and covers the repair or replacement of the product at the seller’s discretion. Unless agreed with the seller in writing beforehand the product must be returned to the sellers premises, or there appointed agent, for all warranty repair work. The cost of returning the product to the supplier is not covered by warranty.

7. Delivery of the Goods 7.1 Delivery of the Goods shall be made to the Buyer’s designated delivery address. The Buyer shall make all arrangements necessary to take delivery of the Goods on the day notified by the Seller for delivery. Should the buyer not be able to take delivery on the agreed date a further delivery will be subject to a further charge. 7.2 The Seller undertakes to use its reasonable endeavours to despatch the Goods on an agreed delivery date, but does not guarantee to do so. Time of delivery shall not be of the essence of the contract. 7.3 The Seller shall not be liable to the Buyer for any loss or damage whether arising directly or indirectly from the late delivery or short delivery of the Goods. If short delivery does take place, the Buyer undertakes not to reject the Goods but to accept the Goods delivered as part performance of the contract. 7.4 If the Buyer fails to take delivery of the Goods on the agreed delivery date or, if no specific delivery date has been agreed, when the Goods are ready for despatch, the Seller shall be entitled to store and insure the Goods and to charge the Buyer the reasonable costs of so doing.

8. Acceptance & return of the Goods 8.1 The Buyer shall be deemed to have accepted the Goods 24 hours after delivery to the Buyer. 8.2 The Buyer shall carry out a thorough inspection of the Goods within 24 hours of delivery and shall give written notification to the Seller within 7 working days of delivery of the Goods of any defects which a reasonable examination would have revealed. 8.3 Where the Buyer has accepted, or has been deemed to have accepted, the Goods the Buyer shall not be entitled to reject Goods which are not in accordance with the contract. 8.4 Any costs associated with returning the goods to the seller, within the stipulated period above, shall be the sole responsibility of the buyer. 8.5 Any damage that occurs to the goods during return transport being returned shall be at the buyers liability and therefore chargeable to the buyer.

9. Title and risk 9.1 Risk shall pass on delivery of the Goods to the Buyer’s designated delivery address. 9.2 Notwithstanding the earlier passing of risk, title and full rights to access to the Goods shall remain with the Seller and shall not pass to the Buyer until the amount due under the invoice for them (including interest and costs) has been paid in full. 9.3 Until title passes the Buyer shall hold the Goods for the Seller, shall store or mark them so that they can at all times be identified as the property of the Seller and allow full rights to access for removal / collection of the goods. 9.4 The Seller may at any time before title passes and without any liability to the Buyer: 9.4.1 repossess and dismantle and use or sell all or any of the Goods and by doing so terminate the Buyer’s right to use, sell or otherwise deal in them; and 9.4.2 for that purpose (or determining what if any Goods are held by the Buyer and inspecting them) enter any premises of or occupied or being used by the Buyer. 9.5 The Seller may maintain an action for the price of any Goods notwithstanding that title in them has not passed to the Buyer.

10. Carriage of Goods Unless agreed in writing by the seller Carriage will be chargeable on all sales dependent on weight of goods delivered and distance travelled.

Depots Contact Details

RIKO UK LTD www.riko-uk.com

Southern Office: Inverallen Yard, Forge Road, Kingsley, Hampshire, GU35 9LW Telephone: 0044 (0)1420 487300 Email: [email protected]

Yorkshire Office: Unit 10, Spruce & Hawe, Blind Lane, Tockwith, YO26 7QJ. Telephone: 0044 (0)1423 359419 Email: [email protected]

South Wales Office: Cold Blow, Narbeth, Pembrokeshire, SA67 8RR Telephone: 0044 (0)7538 379411 Email: [email protected]

North Wales Office: Cyffylliog, Ruthin, Denbighshire, LL15 2DP Telephone: 0044 (0) 1824 538 638 [email protected]

All prices, specifications and details are subject to change without notice. Prices are only binding on receipt of a written quotation.