43-06937 Insert-Epic 430 Oem Integration Manual
Total Page:16
File Type:pdf, Size:1020Kb
OEM Integration Manual PN 43-06938 Rev L, Jan. 2009 This page intentionally left blank Change History Rev A Initial version July 2006 Rev B Added command documentation for [ENQ]<30> Modified the environmental specification Updated a number of printer images. Described more clearly how to enter self test and other test modes. Added color support. Rev C. Minor Format changes Removed references to Pens Added documentation to additional Error counters Removed refinances to the PJ1000 Added a foot note indicating the Vbus on the USB link is used to disable the Serial link. Added a few page breaks. Changes to mounting instructions Rev D Clarified the Macro Save command overview. August 2006 Added a grounding section. Added the [ESC] + J and [ESC] + j commands. (Available on Rev 1.04 of the firmware) Rev E Corrected the parameter order in the [ESC][RS]O file open command. Corrected the Return directory command. Added return file free space commands. Added Close all files command Added Set/Clear File attributes command. Removed Warranty information from this manual. Updated the Technical support phone numbers. Added a return firmware Checksum command. Rev F November 2006 Added a File operation status command. Added documentation for Field Configuration Option Added the power connection pin-out. Added hot plug warning when interconnecting the electronics module with the print module. Added a Firmware Identification command. (Page 156) Added a Firmware Check Sum verification to the [ESC][RS]V command. (Page 220) Added module interconnect and bezel connections. Corrected the Page Mode set page size command Added several Page Mode commands. Rev G Jan 18, 2007 Fixed the ENQ 15, and 22 Hex listing Fixed the description of the print graphic mode and reassign graphic mode commands. Modified the Jam Detection description and improved the paper loading instructions. Added a section on clearing paper jams. The ESC RS E command has been removed and replaced with ESC RS X. ESC RS E deleted all files and should not. User defined macros must have a .mac extension. Removed display pass through Removed multi-drop. Removed the reference to the ESC RS T command in the ESC RS I command description. Removed the ESC w command. It is not in this product. Updated product images. Added a section on selecting the correct driver. Rev H June 2007 Added support for Bitmap fonts. Added USB Configurability Added command to allow user control of the Bezel lamp. Added feature to disable the extended features on the FEED button. Added feature to allow Bezel to flash on error. Added Periodic Status back Fixed description of strike through. Was described as over score. Rev J Sept 2007 Modified the Periodic status back [ESC][EM]p command. Rev K June 2008 Modified the Remote down load command. Rev L Jan 2009 Clarified the power requirements 43-06938 Rev L Page i This page intentionally left blank Page ii 43-06938 Rev L Federal Communications Commission Radio Frequency Interference Statement The Epic 430TM Printer complies with the limits for a Class A computing device in accordance with the specifications in Part 15 of FCC rules. These regulations are designed to minimize radio frequency interference during installation; however, there is no guarantee that radio or television interference will not occur during any particular installation. Interference can be determined by turning the equipment off and on while the radio or television is on. If the printer causes interference to radio or television reception, try to correct the interference by one or more of the following measures: 1. Reorient the radio or television receiving antenna 2. Relocate the printer with respect to the receiver 3. Plug the printer and receiver into different circuits If necessary, the user should consult their dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio/TV Interference Problems. This booklet is available from the US Government Printing Office, Washington, DC 20402. Ask for stock number 004-000-00345-4. Canadian Department of Communications Radio Interference Statement The Epic 430TM Printer does not exceed Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Regulatory Compliance EN60950-1 EN55022 EN55024 CE Mark RoHS 43-06938 Rev L Page iii Disclaimer NOTICE TO ALL PERSONS RECEIVING THIS DOCUMENT: The information in this document is subject to change without notice. No part of this document may be reproduced, stored or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of TransAct Technologies, Inc. ("TransAct"). This document is the property of and contains information that is both confidential and proprietary to TransAct. Recipient shall not disclose any portion of this document to any third party. TRANSACT DOES NOT ASSUME ANY LIABILITY FOR DAMAGES INCURRED, DIRECTLY OR INDIRECTLY, FROM ANY ERRORS, OMISSIONS OR DISCREPANCIES IN THE INFORMATION CONTAINED IN THIS DOCUMENT. TransAct cannot guarantee that changes in software and equipment made by other manufacturers, and referred to in this publication, do not affect the applicability of information in this publication. Copyright © 2007-2009 TransAct Technologies, Inc. All rights reserved. Revision Level L January 2009 Printed in USA Trademarks Some of the product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. BANKjet, 50Plus, Insta-Load, Ithaca, “Made to Order. Built to Last”, Magnetec, PcOS, POSjet, PowerPocket and TransAct are registered trademarks and Epic 430TM, Flex-Zone, _mport, ithaColor, iTherm, KITCHENjet, Momentum, QDT and TicketBurst are trademarks of TransAct Technologies, Inc. Page iv 43-06938 Rev L Table of Contents Change History ................................................................................................ i Federal Communications Commission Radio Frequency Interference Statement .......................................................................................................iii Canadian Department of Communications Radio Interference Statement .......iii Regulatory Compliance ...................................................................................iii Disclaimer ...................................................................................................... iv Copyright ....................................................................................................... iv Trademarks.................................................................................................... iv Table of Contents............................................................................................ v Figures........................................................................................................... xi Tables ............................................................................................................ xi TM Introducing your Epic 430 Printer ........ 1 About your TransAct® Epic 430TM Printer ........................................................ 3 Who Should Read This Guide? ....................................................................... 4 What Is Included in This Guide? ..................................................................... 4 Technical and Sales Support .......................................................................... 5 On-line Technical Support .......................................................................... 5 Telephone Technical Support ..................................................................... 5 Return Materials Authorization and Return Policies .................................... 6 Service Programs ....................................................................................... 6 Sales Support............................................................................................. 6 Contact Information .................................................................................... 7 Epic 430TM Specifications and Requirements ......................................... 9 Epic 430TM Specifications and Requirements ................................................ 11 Standard Features ........................................................................................ 11 Optional Features ......................................................................................... 12 General Specifications .................................................................................. 13 Printer Dimensions ................................................................................... 13 Weight ...................................................................................................... 13 Interface Type .......................................................................................... 13 Printer Type.............................................................................................. 14 Printer Environmental Conditions ............................................................. 14 Reliability.................................................................................................. 14 AC Power Requirements .......................................................................... 14 DC Power Requirements .........................................................................