Quick viewing(Text Mode)

LINE SELECTION GUIDE Upgrade Your Halyards Core Is Made from Class II Fibers and Serves As the Strength the Development of Lighter, Stronger, More Durable Ropes

4,300 lb lb mm 3/8 3/8 3.8 9 in.

3,500 lb lb mm 5/16 5/16 8 3.0 in. descriptions for more information. more for descriptions video and PDF formats PDF and video

2,800 lb lb mm 9/32 9/32 2.3 7 relative properties of each of the components. See our product product our See components. the of each of properties relative in.

splice instructions, available in in available instructions, splice

2,200 lb lb mm 1/4 1/4 1.8 6 In some cases, Samson blends to take advantage of the the of advantage take to fibers blends Samson cases, some In in.

Visit SamsonRope.com for detailed detailed for SamsonRope.com Visit 1,200 lb lb mm 3/16 1.4 5 in.

creep fibers. creep 1-1/2 to 2 × Beam × 2 to 1-1/2 Lines = = Lines Stern

1,000 lb lb mm 5/32 5/32 0.80 4 in. must be protected from UV light. These are all exceptionally low- exceptionally all are These light. UV from protected be must

on all lines. anchor all on

3/4 × Length Over All Over Length × 3/4 Spring Lines = = Lines Spring

600 lb lb mm 1/8 1/8 0.50 3 in. offer the highest strength of all the high-modulus fibers; however, it it however, fibers; high-modulus the all of strength highest the offer

prespliced, with thimbles included included thimbles with prespliced,

230 lb lb mm 5/64 0.20 2 in.

resistance; liquid crystal (LCP) fibers; and PBO fibers, which which fibers, PBO and fibers; (LCP) polymer crystal liquid resistance;

1-1/2 × Beam × 1-1/2 Lines = = Lines Bow

vessels. They are also professionally professionally also are They vessels.

POUNDS POUNDS MILLIMETER INCHES strength, low stretch, and abrasion resistance with extreme heat heat extreme with resistance abrasion and stretch, low strength,

for some of the world’s largest largest world’s the of some for

Per 100 ft. 100 Per Average Diameter Diameter

Other high-modulus fibers include fibers that blend very high high very blend that fibers aramid include fibers high-modulus Other custom dock lines: dock custom Weight Strength Size Size

hawsers and lines produce

CUSTOM DOCK LINES DOCK CUSTOM

calculating for Formulas

SPECIFICATIONS Available in 500 ft. spools ft. 500 in Available

and quality control under which we we which under control quality and lines, and sheets. sheets. and lines,

for a smooth running, torque-free cord. cord. torque-free running, smooth a for subjected to the same rigorous testing testing rigorous same the to subjected control , in use for -suited is it resistance, UV and

flexibility, knotting, and strength characteristics characteristics strength and knotting, flexibility,

Our recreational marine products are are products marine recreational Our strength, very low stretch, and excellent abrasion, cut, cut, abrasion, excellent and stretch, low very strength,

**3/4" dock lines are available in black and navy blue only. only. blue navy and black in available are lines dock **3/4"

excellent has Samson’s Accessory Cord Cord Accessory

other any than vessels more used in a variety of applications. Extremely lightweight with ultra-high ultra-high with lightweight Extremely applications. of variety a in used

protection. chafe double and size one upgrade conditions storm *For

core, and cover a With

moors that company the particularly well balanced set of characteristics that allow it to be be to it allow that characteristics of set balanced well particularly Cord Accessory 480 Product Code: Code: Product

903 Product Code: Product   ™

40' & 50' & 40' 61–75 ft is a high-modulus (HMPE) with a a with fiber (HMPE) polyethylene high-modulus a is Dyneema from quality Consistent

®

3-strand up to 1-1/8". 1-1/8". to up rope 3-strand

of the application for which they are designing. designing. are they which for application the of

from 1/8" to 9/16", or double and and braid double or 9/16", to 1/8" from 10,900

5/8 5/8

7.8 16 lb lb mm in.

solution-dyed nylon to prevent bleed or fade. fade. or bleed prevent to nylon solution-dyed

  

35' 51–60 ft

requirements performance unique the with characteristics these

Fid may be used to splice hollow braided lines lines braided hollow splice to used be may

7,500 9/16 9/16 14 6.0 lb lb mm in. colored dock lines are produced with with produced are lines dock colored

set of characteristics. The challenge of the rope designer is to match match to is designer rope the of challenge The characteristics. of set

patented worldwide. Available in sets only, the Selma Selma the only, sets in Available worldwide. patented

6,700

1/2 1/2 4.7 12 lb lb mm in. for dock and anchor lines. All of Samson’s Samson’s of All lines. anchor and dock for

 

30' 41–50

There are several modern high-modulus fibers, each with a unique unique a with each fibers, high-modulus modern several are There

ft

Made from highly polished stainless steel, Selma are are Fids Selma steel, stainless polished highly from Made

4,600 7/16 7/16 3.5 11 lb lb mm in. or heavy seas, making nylon the perfect fiber fiber perfect the nylon making seas, heavy or

Fids Selma High-modulus fibers: Which one, for what, and why? and what, for one, Which fibers: High-modulus

3,500 3/8 3/8 2.7 9 lb lb mm in. out the surge effects of wakes, waves, wind, wind, waves, wakes, of effects surge the out

  

25' 36–40 ft

2,500 5/16 5/16 1.7 8 lb lb mm in. smooth help properties elongation elastic or high-modulus double . double high-modulus or

1,400 1/4 1.1 6 lb lb mm in. excellent stretch and flexibility. Nylon’s Nylon’s flexibility. and stretch excellent applications and is widely used for covers on high-performance, high-performance, on covers for used widely is and applications

  

20' 31–35

ft

100% premium nylon that provides provides that nylon premium 100% POUNDS POUNDS MILLIMETER INCHES Polyester is still regarded as an excellent fiber for many marine marine many for fiber excellent an as regarded still is Polyester

Per 100 ft. 100 Per Average Diameter Diameter

with built are lines Samson All Yes. became the standard against which all were measured. measured. were ropes all which against standard the became

Weight Strength Size Size

 

15' 26–30

Is there really a difference? a really there Is ft

SPECIFICATIONS on . Polyester ropes, particularly polyester double braids, braids, double polyester particularly ropes, Polyester winches. on Available in 500 ft. spools ft. 500 in Available

and wet-strength loss. Because it has excellent grip, it works well well works it grip, excellent has it Because loss. wet-strength and degradation. degradation.

dock and anchor lines available. lines anchor and dock

  build ropes that were as strong as nylon, but with much less stretch stretch less much with but nylon, as strong as were that ropes build 10' 15–25 ft sunlight to resistance superior provides and

by ensuring that you’ve got the best best the got you’ve that ensuring by The Ultra Blue fiber has excellent dielectric properties properties dielectric excellent has fiber Blue Ultra The The introduction of polyester fiber allowed rope manufacturers to to manufacturers rope allowed fiber polyester of introduction The

and give yourself a little peace of mind mind of peace little a yourself give and lb 22,200 lb 13,500 lb 8,200 lb 4,900 It floats and has high wet and dry abrasion resistance. resistance. abrasion dry and wet high has and floats It FEET Size

it to absorb shock loads. loads. shock absorb to it

LENGTH Boat than underway. Protect your investment investment your Protect underway. than with high-strength Ultra Blue copolymer olefin fiber. fiber. olefin copolymer Blue Ultra high-strength with mm) (18 mm) (16 mm) (12 mm) (9

still used in dock and anchor lines where its excellent elasticity allows allows elasticity excellent its where lines anchor and dock in used still

LINE

is a fast-splicing single braid constructed constructed braid single fast-splicing a is Quik-Splice

3/4"** 5/8" 1/2" 3/8" us, our boats spend more time moored moored time more spend boats our us,

DOCK strong (much stronger than the natural fibers it replaced), nylon is is nylon replaced), it fibers natural the than stronger (much strong

Quik-Splice 335 Product Code: Code: Product

It’s a fact of boating life that, for most of of most for that, life boating of fact a It’s

Nylon was the first widely used in ropes. Reasonably Reasonably ropes. in used widely fiber synthetic first the was Nylon

the dock and anchor lines anchor and dock the

Strengths are approximate averages of new rope. new of averages approximate are Strengths

999-0070 Product Code: Product

Synthetic fibers: What are the differences? the are What fibers: Synthetic

GUIDE SELECTION LINE DOCK

frequently used lines aboard are are aboard lines used frequently

7,400 lb lb mm 5/8 5/8 8.0 16 in.

(size range 1/4" through 1/2" diameter). 1/2" through 1/4" range (size

Whether power or , the most most the sail, or power Whether

for this application. this for

5,200 lb lb mm 1/2 1/2 4.5 12 in.

Comes with a pusher, and 5 aluminum tubular fids fids tubular aluminum 5 and pusher, a with Comes

CHECK YOUR LOCAL DEALER FOR COLOR AND SIZE AVAILABILITY. SIZE AND COLOR FOR DEALER LOCAL YOUR CHECK

strength needs to be five times the working load, or 4,500 lbs. lbs. 4,500 or load, working the times five be to needs strength

3,200 lb lb mm 3/8 3/8 2.7 9 in. Samson Splicing Kit Splicing Samson

Dock & Anchor Lines Anchor & Dock

break rope’s the load, working 20% a in Factoring lbs. 900

1,700 lb lb mm 1/4 1.4 6 in. WHITE WITH TRACERS WITH WHITE

through a four-purchase sheave system may be calculated at at calculated be may system sheave four-purchase a through

POUNDS POUNDS MILLIMETER INCHES

Per 100 ft. 100 Per Average Diameter Diameter

For example, the total load for an end-of- mainsheet going going mainsheet end-of-boom an for load total the example, For

of diameters and lengths. lengths. and diameters of

Weight Strength Size Size

SPECIFICATIONS SPECIFICATIONS Available in 600 ft. spools ft. 600 in Available the rated break strength. break rated the end and available in a wide range range wide a in available and end

GOLD/WHITE loads. The standard working load for any Samson rope is 20% of of 20% is rope Samson any for load working standard The loads. spliced with a secure eye in one one in eye secure a with spliced ID. red with yellow is core. floating and MFP Floatline MFP

Double braid with a multifilament cover cover polypropylene multifilament a with braid Double halyards, or control lines, anticipated loads are considered working working considered are loads anticipated lines, control or halyards, dock lines are pre- are lines dock HarborMaster

Floatline MFP 461 Product Code: Product

Halyard loads are best determined by your rigger. For sheets, sheets, For rigger. your by determined best are loads wakes, waves, wind or heavy seas. seas. heavy or wind waves, wakes,

smooth out the surge effects of of effects surge the out smooth but consider the following: following: the consider but

NAVY BLUE NAVY

Nylon's elastic elongation helps helps elongation elastic Nylon's

650 3/32 lb lb mm brochure, this of back the in available are loads for Formulas 0.16 2.20 in .

constructed of 100% nylon. nylon. 100% of constructed

Accurately assess your working load working your assess Accurately 500 lb lb mm 1/16 0.12 1.75 in . 999-0010 Product Code: Product

dock lines are are lines dock HarborMaster

POUNDS POUNDS MILLIMETER INCHES ™

double braided ropes. braided double

needs, the choice becomes clear. becomes choice the needs, Per 100 ft. 100 Per Average Diameter Diameter how large or small. All Samson Samson All small. or large how

BLACK

Weight Strength Size Size of lengths two and

to suit your vessel, no matter matter no vessel, your suit to

SPECIFICATIONS SPECIFICATIONS Available in 180 ft. tubes and 600 ft. spools. ft. 600 and tubes ft. 180 in Available knowledge and an accurate assessment of your sailing sailing your of assessment accurate an and knowledge splice, eye braid double

line of double-braided dock lines lines dock double-braided of line

180' easily dispensed from a plastic tube. tube. plastic a from dispensed easily 180'

a for instructions pusher,

The choice may seem intimidating. Armed with a little little a with Armed intimidating. seem may choice The

Samson manufactures a complete complete a manufactures Samson

in comes water. absorb not does and Lash-It! Comes complete with a fid, fid, a with complete Comes

perform superbly under a particular set of circumstances. circumstances. of set particular a under superbly perform weight ratio: it is stronger than steel, so light it floats, floats, it light so steel, than stronger is it ratio: weight Training Kit Training Splice Samson

Choices—because not all boats are the same the are boats all not Choices—because

offers a high strength-to- high a offers coating, urethane Lash-It!

designed for use as running . Each is engineered to to engineered is Each rigging. running as use for designed

LINE FOR THE JOB THE FOR LINE A single braid made from HMPE fiber with Samthane Samthane with fiber HMPE from made braid single A

sailboat. any on uses multiple its of because Samson offers a large variety of ropes specifically specifically ropes of variety large a offers Samson

SPLICING LINES DOCK

  

BEST THE CHOOSING

has been called “the sailor’s duct tape” tape” duct sailor’s “the called been has Lash-It!

So many different ropes —need a little help choosing? help little a —need ropes different many So

Lash-It! 811 811 Product Code: Product ™

 ANCHOR LINES TECH TIP: STRIPPING COVERS Class I and Class II ropes: What are they? WHY SAMSON? Samson ropes are classified into two main categories People and make the difference based on fiber type. Ropes manufactured using the DOUBLE BRAIDS Stripping covers Chances are you have seen Samson synthetic lines at work Choices—because not all traditional fibers of nylon, polyester, and olefin are all around you. For more than 140 years, Samson has led boats are the same from core-dependent categorized as Class I. Those ropes, made in whole or in Available in double braid (Gold- the way in developing high-performance cordage products ™ part with any of the high-modulus fibers, are categorized Gold-N-Braid to meet the most demanding applications in the world. The N-Braid or Super Strong), or double braids as Class II. 3-strand twisted constructions you select for your boat carries the legacy Many high-performance sailors of our experience in industries as diverse as commercial (Pro-Set-3), Samson anchor lines like to strip the covers from core- Double braids and single braids: ™ marine, safety and rescue, arborist, utilities, even the space provide excellent strength, energy Super Strong dependent double braids to save What’s the difference? absorption, and long service life. program. So where’s the advantage for you? When you weight, but it is important to leave the Samson invented the double braid in the late 1950s, buy Samson, you are getting a lot more than a rope. Our 3-STRAND cover intact wherever the line needs when nylon was still the king of synthetic fibers. This all-inclusive package of technology, products, to be cleated, worked on a , construction incorporates a braided core within a braided excellence, and experience provide our customers Samson App or through a rope clutch or stopper. cover, each carrying an equal percentage of the total load. peace of mind. Complete instructions for stripping This type of construction is common to lines that use the For the iPhone and iPad this handy app features: LINE SELECTION Pro-Set-3™ covers are available on our web site at more traditional synthetic fibers like polyester, olefin, and So whether you’re looking for new sheets to trim your > Inspection and retirement criteria GUIDE SamsonRope.com nylon. In addition to carrying up to one-half of the load, the composite or replacing the halyards on a traditional > Internal and external abrasion inspection information cover serves to protect the core from abrasion or schooner, look for Samson. It assures you of performance > Splice Instructions 2019 degradation, to provide grip on winches or in clutches and Samson anchor lines are shipped with a prespliced you can depend on, anytime, anyplace. Download it at high-strength, reinforced captive thimble. Smaller stoppers, and to provide protection from friction- SamsonRope.com diameters are shipped in convenient, reusable plastic generated heat. tote boxes. Longer lengths on spools are available. Contact your local Samson dealer for more information. For applications that require higher strength and lighter > TECHNOLOGY Staffed with dedicated scientists and TECH TIP: HALYARDS weight than traditional Class I fibers provide, you will look application engineers, Samson’s R&D department is to a core-dependant double braid. In this construction, the dedicated to problem solving, and leads the in ANCHOR LINE SELECTION GUIDE Upgrade Your Halyards core is made from Class II fibers and serves as the strength the development of lighter, stronger, more durable ropes. Strengths are approximate averages of new rope. Equally important to product is our ability to Have you ever had a difficult time furling your when the member while the cover is typically made of Class I fibers. ™ ™ ™ stand confidently behind our products with accurate, Boat Size Gold-N-Braid Super Strong Pro-Set breeze picked up? Many times, this is due to an old halyard Single braids are ropes designed without a separate core. reliable product specifications based on rigorous testing 3/8 in. 3/8 in. 3/8 in. 15–25 ft that is stretching. This causes your jib to sag at the luff, and and measuring. 4,500 lb 4,900 lb 3,600 lb Samson manufactures a wide variety of single braids. For keeps the furler from freely. sailing applications, the most common single braid is a 3/8 in. 3/8 in. 1/2 in. 26–30 ft > PRODUCTS Samson products are considered state of the 4,500 lb 4,900 lb 6,300 lb Upgrade your halyards to any of Samson’s low-stretch, 12-strand line. Where necessary or desired, covers can be added to single braids to protect them from exposure to art by sailors around the world. Samson has pioneered 3/8 in. 3/8 in. 1/2 in. lightweight, high-strength options, and watch your jib furl 31–35 ft heat, abrasion, or cutting while in use. the use of new synthetic fibers, unique constructions, 4,500 lb 4,900 lb 6,300 lb easier under all conditions. and coatings to improve the service life of ropes, reduce

1/2 in. 1/2 in. 5/8 in. ® 36–40 ft Alternately, a sailor may opt to strip the cover from a double weight, reduce snagging, enhance abrasion resistance, Dyneema is a registered 7,900 lb 8,600 lb 10,000 lb braid in order to save additional weight aloft for halyard and make splicing easier. trademark of DSM N.V. 1/2 in. 1/2 in. 5/8 in. Dyneema® is DSM’s high-performance 41–50 ft applications. The cover remains intact in areas on the rope 7,900 lb 8,600 lb 10,000 lb Use a blended-core halyard on a jib > MANUFACTURING Samson’s standards of manufacturing polyethylene product. where the rope is cleated or winched. 5/8 in. 5/8 in. 3/4 in. furler so you do not stretch the sail guarantee a quality product every time. Our TRADEMARK NOTICES: 51–60 ft ® ® 14,000 lb 15,200 lb 13,500 lb Splicing techniques: manufacturing plants, in Lafayette, Louisiana and AmSteel and AmSteel -Blue are registered trademarks 3/4 in. 3/4 in. 7/8 in. beyond its design. of Samson Rope , Inc. 61–75 ft Ferndale, Washington are both ISO certified and utilize 19,400 lb 18,800 lb 19,000 lb Why is knowing the class of my line important? All Samson named products herein are trademarks of LEAN manufacturing principles. Samson Rope Technologies, Inc. 7/8 in. 1 in. Splicing techniques are different between Class I and 76–90 ft 29,000 lb 25,000 lb Class II ropes and reflect the differences in strengths and > SERVICE World-class service and support, whenever you 1 in. grip between the two groups. It is absolutely critical to use need it, wherever you need it. 91–100 ft 36,000 lb the correct splice for the class of rope being used. The > EXPERIENCE When you sail with Samson, your boat carries 1 in. product specifications include rope construction, class and 101–120 ft 36,000 lb recommended splicing technique. the legacy of our 140+ years’ experience providing rope to diverse industries. Known for excellence and quality, we have the experience, integrity, and reliability you can get only from The Strongest Name in Rope. ANCHOR LINE LENGTHS 2090 Thornton Street,

™ ™ ™ Diameter Gold-N-Braid Super Strong Pro-Set Ferndale, WA 98248 USA INCHES FEET FEET FEET Tel 01.360.384.4669 3/8 in. 100', 150', 200' 100', 150', 200' 100', 150' Fax 01.360.384.0572 1/2 in. 100', 150', 200' 100', 150', 200', 250', 300' 100', 150', 200', 300' SamsonRope.com 5/8 in. 200', 250' 150', 200', 250', 300' 150', 200', 250' © 2016/2019 Samson Rope Technologies, Inc. All rights reserved. 2680 1.5K 06/2019

2680 1.5K 06/2019 1.5K 2680

reserved. rights All Inc. Technologies, Rope Samson 2016/2019 ©

5/8 5/8 150', 200', 250' 200', 150', 300' 250', 200', 150', 250' 200', in.

1/2 1/2 100', 150', 200', 300' 200', 150', 100', 300' 250', 200', 150', 100', 200' 150', 100', in. in. SamsonRope.com

360.384.0572 01 . Fax 3/8 3/8 100', 150' 100', 200' 150', 100', 200' 150', 100', in.

360.384.4669 360.384.4669 01

. Tel

FEET FEET FEET INCHES

Pro-Set Strong Super Gold-N-Braid Diameter

Ferndale, WA 98248 USA 98248 WA Ferndale,

™ ™ ™

2090 Thornton Street, Street, Thornton 2090 ANCHOR LINE LENGTHS LINE ANCHOR

get only from The Strongest Name in Rope. in Name Strongest The from only get

4,300 lb lb mm 3/8 3/8 3.8 9 in. we have the experience, integrity, and reliability you can can you reliability and integrity, experience, the have we

3,500 lb lb mm 5/16 5/16 8 3.0 in. descriptions for more information. more for descriptions video and PDF formats PDF and video to diverse industries. Known for excellence and quality, quality, and excellence for Known industries. diverse to

recommended splicing technique. splicing recommended

2,800 lb lb mm 9/32 9/32 2.3 7

relative properties of each of the components. See our product product our See components. the of each of properties relative in. 36,000 36,000

lb

the legacy of our 140+ years’ experience providing rope rope providing experience years’ 140+ our of legacy the

120 120 – 101 ft

splice instructions, available in in available instructions, splice

1

in. product specifications include rope construction, class and and class construction, rope include specifications product

2,200 mm lb lb 1/4 1/4 1.8 6 In some cases, Samson blends fibers to take advantage of the the of advantage take to fibers blends Samson cases, some In in. EXPERIENCE > When you sail with Samson, your boat carries carries boat your Samson, with sail you When

Visit SamsonRope.com for detailed detailed for SamsonRope.com Visit

the correct splice for the class of rope being used. The The used. being rope of class the for splice correct the 36,000 36,000 lb 1,200 lb lb mm 3/16 1.4 5 in.

creep fibers. creep

91–100 91–100 ft 1-1/2 to 2 × Beam × 2 to 1-1/2 Stern Lines = = Lines Stern

1

in.

need it, wherever you need it. need you wherever it, need grip between the two groups. It is absolutely critical to use use to critical absolutely is It groups. two the between grip

1,000 lb lb mm 5/32 5/32 4 0.80 in.

must be protected from UV light. These are all exceptionally low- exceptionally all are These light. UV from protected be must

on all anchor lines. anchor all on

SERVICE

> World-class service and support, whenever you you whenever support, and service World-class

25,000 25,000 29,000 Class II ropes and reflect the differences in strengths and and strengths in differences the reflect and ropes II Class lb lb 3/4 × Length Over All Over Length × 3/4 Spring Lines = = Lines Spring

600

mm lb lb 1/8 1/8 0.50 3 in.

76–90 76–90

ft offer the highest strength of all the high-modulus fibers; however, it it however, fibers; high-modulus the all of strength highest the offer

prespliced, with thimbles included included thimbles with prespliced,

1 1 7/8

in. in .

Splicing techniques are different between Class I and and I Class between different are techniques Splicing

230 lb lb mm 5/64

0.20 2

in.

resistance; liquid crystal polymer (LCP) fibers; and PBO fibers, which which fibers, PBO and fibers; (LCP) polymer crystal liquid resistance;

Samson Rope Technologies, Inc. Technologies, Rope Samson

LEAN manufacturing principles. principles. manufacturing LEAN 1-1/2 × Beam × 1-1/2 Bow Lines = = Lines Bow

vessels. They are also professionally professionally also are They vessels.

19,000 19,000 18,800 19,400 lb lb lb important? line my of class the knowing is Why

of trademarks are herein products named Samson All

POUNDS POUNDS MILLIMETER INCHES

61–75 61–75

ft

strength, low stretch, and abrasion resistance with extreme heat heat extreme with resistance abrasion and stretch, low strength,

Ferndale, Washington are both ISO certified and utilize utilize and certified ISO both are Washington Ferndale,

for some of the world’s largest largest world’s the of some for 7/8 7/8 3/4 3/4

in. in. in.

Average Diameter Diameter Per 100 ft. 100 Per beyond its design. design. its beyond

of Samson Rope Technologies, Inc. Technologies, Rope Samson of

techniques: Splicing

Other high-modulus fibers include aramid fibers that blend very high high very blend that fibers aramid include fibers high-modulus Other custom dock lines: dock custom

Strength Size Size Weight

manufacturing plants, in Lafayette, Louisiana and and Louisiana Lafayette, in plants, manufacturing

hawsers and lines mooring produce

trademarks registered are -Blue AmSteel and AmSteel

13,500 13,500 15,200 14,000

lb lb lb

CUSTOM DOCK LINES DOCK CUSTOM ® ®

calculating for Formulas

51–60 51–60

ft furler so you do not stretch the sail sail the stretch not do you so furler

SPECIFICATIONS

TRADEMARK NOTICES: TRADEMARK Available in 500 ft. spools ft. 500 in Available

guarantee a quality product every time. Our Our time. every product quality a guarantee 5/8 3/4 3/4 5/8

in. in. in. and quality control under which we we which under control quality and lines, and sheets. sheets. and lines,

where the rope is cleated or winched. or cleated is rope the where

for a smooth running, torque-free cord. cord. torque-free running, smooth a for

MANUFACTURING > Samson’s standards of manufacturing manufacturing of standards Samson’s

jib a on halyard blended-core a Use

subjected to the same rigorous testing testing rigorous same the to subjected control halyards, in use for well-suited is it resistance, UV and

10,000 10,000 8,600 7,900

lb lb lb

polyethylene product. polyethylene

applications. The cover remains intact in areas on the rope rope the on areas in intact remains cover The applications.

41–50 41–50

ft

flexibility, knotting, and strength characteristics characteristics strength and knotting, flexibility,

5/8 5/8 1/2 1/2

in. in. in.

Dyneema high-performance DSM’s is Our recreational marine products are are products marine recreational Our cut, abrasion, excellent and stretch, low very strength,

® **3/4" dock lines are available in black and navy blue only. only. blue navy and black in available are lines dock **3/4"

braid in order to save additional weight aloft for halyard halyard for aloft weight additional save to order in braid

excellent has Samson’s Accessory Cord Cord Accessory

and make splicing easier. splicing make and

trademark of Royal DSM N.V. DSM Royal of trademark

other any than vessels more

10,000 10,000 8,600 7,900 used in a variety of applications. Extremely lightweight with ultra-high ultra-high with lightweight Extremely applications. of variety a in used lb lb lb

protection. chafe double and size one upgrade conditions storm *For

core, nylon and cover polyester a With

36–40

Alternately, a sailor may opt to strip the cover from a double double a from cover the strip to opt may sailor a Alternately, ft

weight, reduce snagging, enhance abrasion resistance, resistance, abrasion enhance snagging, reduce weight,

registered a is Dyneema

1/2 5/8 5/8 1/2

in. in. in. ®

moors that company the particularly well balanced set of characteristics that allow it to be be to it allow that characteristics of set balanced well particularly

Cord Accessory 480 Product Code: Code: Product

and coatings to improve the service life of ropes, reduce reduce ropes, of life service the improve to coatings and

903 Product Code: Product  

40' & 50' & 40' 61–75 easier under all conditions. all under easier

6,300 6,300 4,900 4,900 4,500 ft lb lb lb

is a high-modulus polyethylene (HMPE) fiber with a a with fiber (HMPE) polyethylene high-modulus a is Dyneema

from quality Consistent

heat, abrasion, or cutting while in use. in while cutting or abrasion, heat,

31–35 31–35

ft

®

the use of new synthetic fibers, unique constructions, constructions, unique fibers, synthetic new of use the

3/8 3/8 1/2 1/2 3/8

in. in. in.

3-strand rope up to 1-1/8". 1-1/8". to up rope 3-strand lightweight, high-strength options, and watch your jib furl furl jib your watch and options, high-strength lightweight,

added to single braids to protect them from exposure to to exposure from them protect to braids single to added

of the application for which they are designing. designing. are they which for application the of

art by sailors around the world. Samson has pioneered pioneered has Samson world. the around sailors by art

from 1/8" to 9/16", or double braid and and braid double or 9/16", to 1/8" from 10,900

5/8 5/8

7.8 16 lb lb mm in.

6,300 6,300 4,900 4,500 lb lb lb

low-stretch, Samson’s of any to halyards your Upgrade solution-dyed nylon to prevent bleed or fade. fade. or bleed prevent to nylon solution-dyed

  

35' 51–60 12-strand line. Where necessary or desired, covers can be be can covers desired, or necessary Where line. 12-strand

ft

26–30 26–30

ft

requirements performance unique the with characteristics these

PRODUCTS PRODUCTS

> Samson products are considered state of the the of state considered are products Samson

1/2 3/8 3/8

Fid may be used to splice hollow braided lines lines braided hollow splice to used be may Fid in. in. in.

7,500 9/16 9/16

14 6.0 lb lb mm in. colored dock lines are produced with with produced are lines dock colored

sailing applications, the most common single braid is a a is braid single common most the applications, sailing

set of characteristics. The challenge of the rope designer is to match match to is designer rope the of challenge The characteristics. of set

keeps the furler from spinning freely. spinning from furler the keeps patented worldwide. Available in sets only, the Selma Selma the only, sets in Available worldwide. patented

3,600 3,600 4,900 4,900 4,500

lb lb lb 6,700

1/2 1/2 4.7 12 lb lb mm

in.

for dock and anchor lines. All of Samson’s Samson’s of All lines. anchor and dock for

Samson manufactures a wide variety of single braids. For For braids. single of variety wide a manufactures Samson  

15–25 15–25

and measuring. measuring. and ft

30' 41–50

There are several modern high-modulus fibers, each with a unique unique a with each fibers, high-modulus modern several are There

ft

Made from highly polished stainless steel, Selma Fids are are Fids Selma steel, stainless polished highly from Made

that is stretching. This causes your jib to sag at the luff, and and luff, the at sag to jib your causes This stretching. is that

3/8 3/8 3/8

in. in. in.

4,600 7/16 7/16 3.5 11 lb lb mm in. or heavy seas, making nylon the perfect fiber fiber perfect the nylon making seas, heavy or

Single braids are ropes designed without a separate core. core. separate a without designed ropes are braids Single reliable product specifications based on rigorous testing testing rigorous on based specifications product reliable Fids Selma High-modulus fibers: Which one, for what, and why? and what, for one, Which fibers: High-modulus

breeze picked up? Many times, this is due to an old halyard halyard old an to due is this times, Many up? picked breeze

Gold-N-Braid Size Boat Pro-Set Strong Super 3,500 3/8 3/8 2.7 9 lb lb mm in. out the surge effects of wakes, waves, wind, wind, waves, wakes, of effects surge the out

stand confidently behind our products with accurate, accurate, with products our behind confidently stand

™ ™ ™

  

25' 36–40 Have you ever had a difficult time furling your jib when the the when jib your furling time difficult a had ever you Have ft

member while the cover is typically made of Class I fibers. fibers. I Class of made typically is cover the while member

2,500 5/16 5/16

1.7 8 lb lb mm in. smooth help properties elongation elastic or high-modulus double braids. double high-modulus or

Strengths are approximate averages of new rope. new of averages approximate are Strengths Equally important to product innovation is our ability to to ability our is innovation product to important Equally

core is made from Class II fibers and serves as the strength strength the as serves and fibers II Class from made is core 1,400 GUIDE SELECTION LINE ANCHOR 1/4 1.1 6 lb lb mm in.

excellent stretch and flexibility. Nylon’s Nylon’s flexibility. and stretch excellent Upgrade Your Halyards Halyards Your Upgrade high-performance, on covers for used widely is and applications

the development of lighter, stronger, more durable ropes. ropes. durable more stronger, lighter, of development the

  

20' 31–35

ft

to a core-dependant double braid. In this construction, the the construction, this In braid. double core-dependant a to 100% premium nylon that provides provides that nylon premium 100%

POUNDS POUNDS MILLIMETER INCHES Polyester is still regarded as an excellent fiber for many marine marine many for fiber excellent an as regarded still is Polyester

dedicated to problem solving, and leads the industry in in industry the leads and solving, problem to dedicated

Per 100 ft. 100 Per Average Diameter Diameter

weight than traditional Class I fibers provide, you will look look will you provide, fibers I Class traditional than weight

with built are lines Samson All Yes.

became the standard against which all ropes were measured. measured. were ropes all which against standard the became

TECH TIP: HALYARDS TIP: TECH

application engineers, Samson’s R&D department is is department R&D Samson’s engineers, application Weight Strength Size Size

 

For applications that require higher strength and lighter lighter and strength higher require that applications For 15' 26–30

Is there really a difference? a really there Is

ft

Contact your local Samson dealer for more information. information. more for dealer Samson local your Contact

SPECIFICATIONS on winches. Polyester ropes, particularly polyester double braids, braids, double polyester particularly ropes, Polyester winches. on Available in 500 ft. spools ft. 500 in Available TECHNOLOGY > Staffed with dedicated scientists and and scientists dedicated with Staffed

tote boxes. Longer lengths on spools are available. available. are spools on lengths Longer boxes. tote

and wet-strength loss. Because it has excellent grip, it works well well works it grip, excellent has it Because loss. wet-strength and

degradation. degradation.

generated heat. generated

diameters are shipped in convenient, reusable plastic plastic reusable convenient, in shipped are diameters

dock and anchor lines available. lines anchor and dock

 

build ropes that were as strong as nylon, but with much less stretch stretch less much with but nylon, as strong as were that ropes build 10' 15–25

ft sunlight to resistance superior provides and

friction- from protection provide to and stoppers, high-strength, reinforced captive thimble. Smaller Smaller thimble. captive reinforced high-strength,

by ensuring that you’ve got the best best the got you’ve that ensuring by

SamsonRope.com Download it at at it Download

The Ultra Blue fiber has excellent dielectric properties properties dielectric excellent has fiber Blue Ultra The The introduction of polyester fiber allowed rope manufacturers to to manufacturers rope allowed fiber polyester of introduction The

you can depend on, anytime, anyplace. anyplace. anytime, on, depend can you

Samson anchor lines are shipped with a prespliced prespliced a with shipped are lines anchor Samson

degradation, to provide grip on winches or in clutches and and clutches in or winches on grip provide to degradation,

and give yourself a little peace of mind mind of peace little a yourself give and lb 22,200 lb 13,500 lb 8,200 lb 4,900

It floats and has high wet and dry abrasion resistance. resistance. abrasion dry and wet high has and floats It Size FEET

Splice Instructions Instructions Splice >

schooner, look for Samson. It assures you of performance performance of you assures It Samson. for look schooner,

it to absorb shock loads. loads. shock absorb to it

2019

cover serves to protect the core from abrasion or ultraviolet ultraviolet or abrasion from core the protect to serves cover

Boat LENGTH

than underway. Protect your investment investment your Protect underway. than with high-strength Ultra Blue copolymer olefin fiber. fiber. olefin copolymer Blue Ultra high-strength with

mm) (18 mm) (16 mm) (12 mm) (9

composite genoa or replacing the halyards on a traditional traditional a on halyards the replacing or genoa composite Internal and external abrasion inspection information inspection abrasion external and Internal >

still used in dock and anchor lines where its excellent elasticity allows allows elasticity excellent its where lines anchor and dock in used still

LINE

SamsonRope.com

nylon. In addition to carrying up to one-half of the load, the the load, the of one-half to up carrying to addition In nylon. is a fast-splicing single braid constructed constructed braid single fast-splicing a is Quik-Splice

3/4"** 5/8" 1/2" 3/8" us, our boats spend more time moored moored time more spend boats our us,

GUIDE

DOCK

So whether you’re looking for new sheets to trim your your trim to sheets new for looking you’re whether So

strong (much stronger than the natural fibers it replaced), nylon is is nylon replaced), it fibers natural the than stronger (much strong Quik-Splice 335 Product Code: Code: Product Inspection and retirement criteria retirement and Inspection >

site at at site web our on available are covers more traditional synthetic fibers like polyester, olefin, and and olefin, polyester, like fibers synthetic traditional more

It’s a fact of boating life that, for most of of most for that, life boating of fact a It’s

Pro-Set-3

Nylon was the first synthetic fiber widely used in ropes. Reasonably Reasonably ropes. in used widely fiber synthetic first the was Nylon

Complete instructions for stripping stripping for instructions Complete

This type of construction is common to lines that use the the use that lines to common is construction of type This

the dock and anchor lines anchor and dock the

Strengths are approximate averages of new rope. new of averages approximate are Strengths

For the iPhone and iPad this handy app features: features: app handy this iPad and iPhone the For

SELECTION LINE

peace of mind. mind. of peace 999-0070 Product Code: Product

Synthetic fibers: What are the differences? the are What fibers: Synthetic

GUIDE SELECTION LINE DOCK or through a rope clutch or stopper. stopper. or clutch rope a through or cover, each carrying an equal percentage of the total load. load. total the of percentage equal an carrying each cover,

frequently used lines aboard are are aboard lines used frequently Samson App Samson

7,400 lb lb mm 5/8 5/8

8.0 16 in. excellence, and experience provide our customers customers our provide experience and excellence,

(size range 1/4" through 1/2" diameter). 1/2" through 1/4" range (size

to be cleated, worked on a winch, winch, a on worked cleated, be to construction incorporates a braided core within a braided braided a within core braided a incorporates construction

Whether power or sail, the most most the sail, or power Whether

for this application. this for

5,200 lb lb mm 1/2 1/2 4.5 12 all-inclusive package of technology, products, manufacturing manufacturing products, technology, of package all-inclusive in.

3-STRAND Comes with a pusher, and 5 aluminum tubular fids fids tubular aluminum 5 and pusher, a with Comes

CHECK YOUR LOCAL DEALER FOR COLOR AND SIZE AVAILABILITY. SIZE AND COLOR FOR DEALER LOCAL YOUR CHECK

cover intact wherever the line needs needs line the wherever intact cover when nylon was still the king of synthetic fibers. This This fibers. synthetic of king the still was nylon when

strength needs to be five times the working load, or 4,500 lbs. lbs. 4,500 or load, working the times five be to needs strength

3,200 lb lb mm 3/8 3/8 buy Samson, you are getting a lot more than a rope. Our Our rope. a than more lot a getting are you Samson, buy 2.7 9 in. Samson Splicing Kit Splicing Samson

weight, but it is important to leave the the leave to important is it but weight, Samson invented the double braid in the late 1950s, 1950s, late the in braid double the invented Samson

Dock & Anchor Lines Anchor & Dock

absorption, and long service life. service long and absorption,

900 lbs. Factoring in a 20% working load, the rope’s break break rope’s the load, working 20% a in Factoring lbs. 900

1,700 program. So where’s the advantage for you? When you you When you? for advantage the where’s So program. lb lb mm 1/4 1.4 6 in.

WHITE WITH TRACERS WITH WHITE

difference? the What’s

dependent double braids to save save to braids double dependent

Strong Super

provide excellent strength, energy energy strength, excellent provide

through a four-purchase sheave system may be calculated at at calculated be may system sheave four-purchase a through

marine, safety and rescue, arborist, utilities, even the space space the even utilities, arborist, rescue, and safety marine, ™

POUNDS POUNDS MILLIMETER INCHES

like to strip the covers from core- from covers the strip to like

braids: single and braids Double

Per 100 ft. 100 Per Average Diameter Diameter

Samson anchor lines lines anchor Samson (Pro-Set-3), (Pro-Set-3),

For example, the total load for an end-of-boom mainsheet going going mainsheet end-of-boom an for load total the example, For

of our experience in industries as diverse as commercial commercial as diverse as industries in experience our of

of diameters and lengths. lengths. and diameters of

Weight Strength Size Size Many high-performance sailors sailors high-performance Many

3-strand twisted constructions twisted 3-strand

running rigging you select for your boat carries the legacy legacy the carries boat your for select you rigging running SPECIFICATIONS SPECIFICATIONS Available in 600 ft. spools ft. 600 in Available the rated break strength. break rated the end and available in a wide range range wide a in available and end

as Class II. Class as

or or or Super Strong), Strong), Super N-Braid

double braids double

to meet the most demanding applications in the world. The The world. the in applications demanding most the meet to GOLD/WHITE loads. The standard working load for any Samson rope is 20% of of 20% is rope Samson any for load working standard The loads.

Gold-N-Braid spliced with a secure eye in one one in eye secure a with spliced

ID. red with yellow is core. floating and MFP Floatline MFP

part with any of the high-modulus fibers, are categorized categorized are fibers, high-modulus the of any with part

Available in double braid double in Available (Gold-

the way in developing high-performance cordage products products cordage high-performance developing in way the Double braid with a multifilament polypropylene cover cover polypropylene multifilament a with braid Double halyards, or control lines, anticipated loads are considered working working considered are loads anticipated lines, control or halyards,

dock lines are pre- are lines dock

HarborMaster

categorized as Class I. Those ropes, made in whole or in in or whole in made ropes, Those I. Class as categorized

from core-dependent core-dependent from

boats are the same the are boats

Floatline MFP 461 Product Code: Product

all around you. For more than 140 years, Samson has led led has Samson years, 140 than more For you. around all

Halyard loads are best determined by your rigger. For sheets, sheets, For rigger. your by determined best are loads Halyard

wakes, waves, wind or heavy seas. seas. heavy or wind waves, wakes,

traditional fibers of nylon, polyester, and olefin are are olefin and polyester, nylon, of fibers traditional ™

Choices—because not all all not Choices—because

Chances are you have seen Samson synthetic lines at work work at lines synthetic Samson seen have you are Chances smooth out the surge effects of of effects surge the out smooth

Stripping covers covers Stripping

DOUBLE BRAIDS DOUBLE but consider the following: following: the consider but

based on fiber type. Ropes manufactured using the the using manufactured Ropes type. fiber on based

NAVY BLUE NAVY

People and technology make the difference difference the make technology and People

Nylon's elastic elongation helps helps elongation elastic Nylon's

650 3/32 lb lb mm Formulas for sheet loads are available in the back of this brochure, brochure, this of back the in available are loads sheet for Formulas

0.16 2.20 in .

Samson ropes are classified into two main categories categories main two into classified are ropes Samson

ANCHOR LINES ANCHOR

constructed of 100% nylon. nylon. 100% of constructed  

Accurately assess your working load working your assess Accurately TECH TIP: STRIPPING COVERS STRIPPING TIP: TECH they? are What ropes: II Class and I Class 500 lb lb mm 1/16 0.12 1.75 in . 999-0010 WHY SAMSON? WHY Product Code: Product

dock lines are are lines dock HarborMaster

POUNDS POUNDS MILLIMETER INCHES ™

double braided ropes. braided double

needs, the choice becomes clear. becomes choice the needs, Per 100 ft. 100 Per Average Diameter Diameter how large or small. All Samson Samson All small. or large how

BLACK

Weight Strength Size Size of lengths two and

to suit your vessel, no matter matter no vessel, your suit to

SPECIFICATIONS SPECIFICATIONS Available in 180 ft. tubes and 600 ft. spools. ft. 600 and tubes ft. 180 in Available knowledge and an accurate assessment of your sailing sailing your of assessment accurate an and knowledge double braid eye splice, splice, eye braid double

line of double-braided dock lines lines dock double-braided of line

180' easily dispensed from a plastic tube. tube. plastic a from dispensed easily 180' pusher, instructions for a a for instructions pusher,

The choice may seem intimidating. Armed with a little little a with Armed intimidating. seem may choice The

Samson manufactures a complete complete a manufactures Samson and does not absorb water. water. absorb not does and in comes Lash-It! Comes complete with a fid, fid, a with complete Comes

perform superbly under a particular set of circumstances. circumstances. of set particular a under superbly perform weight ratio: it is stronger than steel, so light it floats, floats, it light so steel, than stronger is it ratio: weight Training Kit Training Splice Samson

Choices—because not all boats are the same the are boats all not Choices—because

urethane coating, coating, urethane offers a high strength-to- high a offers Lash-It! ™ designed for use as running rigging. Each is engineered to to engineered is Each rigging. running as use for designed

LINE FOR THE JOB THE FOR LINE

A single braid made from HMPE fiber with Samthane Samthane with fiber HMPE from made braid single A So many different ropes —need a little help choosing? Lash-It! Product Code: 811

Lash-It! because of its multiple uses on any sailboat. sailboat. any on uses multiple its of because has been called “the sailor’s duct tape” Samson offers a large variety of ropes specifically specifically ropes of variety large a offers Samson

SPLICING

CHOOSING THE BEST LINES DOCK  

   

Samson offers a large variety of ropes specifically DOCK LINES SPLICING BEST THE CHOOSING has been called “the sailor’s duct tape” tape” duct sailor’s “the called been has because of its multiple uses on any sailboat. Lash-It!

So many different ropes —need a little help choosing? help little a —need ropes different many So

Lash-It!

811 811

LINE FOR THECode: Product JOB designed for use as running rigging. Each is engineered to A single braid made from HMPE fiber with Samthane ™ Choices—because not all boats are the same urethane coating, Lash-It! offers a high strength-to- perform superbly under a particular set of circumstances. Samson Splice Training Kit weight ratio: it is stronger than steel, so light it floats, The choice may seem intimidating. Armed with a little Samson manufactures a complete Comes complete with a fid, and does not absorb water. Lash-It! comes in line of double-braided dock lines pusher, instructions for a 180' easily dispensed from a plastic tube. knowledge and an accurate assessment of your sailing to suit your vessel, no matter double braid eye splice, SPECIFICATIONS Available in 180 ft. tubes and 600 ft. spools. BLACK and two lengths of Size Size Strength Weight needs, the choice becomes clear. how large or small. All Samson double braided ropes. Diameter Diameter Average Per 100 ft. HarborMaster™ dock lines are INCHES MILLIMETER POUNDS POUNDS WHY SAMSON? Product Code:  ANCHOR LINES AccuratelyTECH assessTIP: yourSTRIPPING working load COVERS Class I and Class II ropes: What are they? constructed of 100% nylon. 999-0010 1/16 in. 1.75 mm 500 lb 0.12 lb Formulas for sheet loads are available in the back of this brochure, Samson ropes are classified into two main categories 3/32 in. 2.20 mm lb 0.16 lb PeopleNylon's and technology elastic elongation make helps the difference 650 based on fiber type. Ropes manufactured using the NAVY BLUE DOUBLE BRAIDS but consider the following:Stripping covers Chancessmooth are youout havethe surge seen effectsSamson of synthetic lines at work Choices—because not all traditional fibers of nylon, polyester, and olefin are ™ Halyard loads are best determined by your rigger. For sheets, all aroundwakes, you. waves, For more wind than or heavy 140 years, seas. Samson has led boats are the same from core-dependent categorized as Class I. Those ropes, made in whole or in MFP Floatline Product Code: 461 Available in double braid (Gold- halyards, or control lines, anticipated loads are considered working the wayHarborMaster in developing dock high-performance lines are pre- cordage products Double braid with a multifilament polypropylene cover ™ part with any of the high-modulus fibers, are categorized Gold-N-Braid loads. The standard working load for any Samson rope is 20% of to meetspliced the most with demandinga secure eye applications in one in theGOLD/WHITE world. The and floating core. MFP Floatline is yellow with red ID. N-Braid or Super Strong), or double braids as Class II. the rated break strength. runningend rigging and available you select in afor wide your range boat carries the legacy SPECIFICATIONS Available in 600 ft. spools 3-strand twisted constructions Many high-performance sailors For example, the total load for an end-of-boom mainsheet going of ourof experience diameters in and industries lengths. as diverse as commercial Size Size Strength Weight (Pro-Set-3), Samson anchor lines like to strip the covers from core- Double braids and single braids: Diameter Diameter Average Per 100 ft. ™ through a four-purchase sheave system may be calculated at marine, safety and rescue, arborist, utilities, even the space INCHES MILLIMETER POUNDS POUNDS provide excellent strength, energy Super Strong dependent double braids to save What’s the difference? 900 lbs. Factoring in a 20% working load, the rope’s break program. So where’s the advantage for you? WHITEWhen WITH you TRACERS 1/4 in. 6 mm 1,700 lb 1.4 lb absorption, and long service life. weight, but it is important to leave the Samson invented the Dockdouble braid & inAnchor the late 1950s, Lines strength needs to be five times the working load, or 4,500 lbs. buy Samson, you are getting a lot more than a rope. Our Samson Splicing Kit 3/8 in. 9 mm 3,200 lb 2.7 lb cover intact wherever the line needs when nylon was still the king of synthetic fibers. This 3-STRAND for this application. all-inclusiveCHECK packageYOUR LOCAL of technology, DEALER FOR products, COLOR manufacturingAND SIZE AVAILABILITY. Comes with a pusher, and 5 aluminum tubular fids 1/2 in. 12 mm 5,200 lb 4.5 lb to be cleated, worked on a winch, construction incorporatesWhether a braided power core orwithin sail, a thebraided most excellence, and experience provide our customers (size range 1/4" through 1/2" diameter). 5/8 in. 16 mm 7,400 lb 8.0 lb or through a rope clutch or stopper. cover, each carrying anfrequently equal percentage used lines of the aboardtotal load. are Samson App Synthetic fibers: What are the differences? peaceDOCK of mind. LINE SELECTION GUIDE Product Code: 999-0070 This type of constructionthe is dockcommon and to anchor lines that lines use the Strengths are approximate averages of new rope. For the iPhone and iPad this handy app features: LINE SELECTION ™ Nylon was the first syntheticComplete fiber instructions widely used for in strippingropes. Reasonably Pro-Set-3 It’s a fact of boating life that, for most of ™ strong (much stronger thancovers the are natural available fibers on it ourreplaced), web site nylonat is more traditional synthetic fibers like polyester, olefin, and So whether you’re looking for new sheets to trim your > Inspection and retirement criteria Quik-Splice Product Code: 335 us, our boats spend more time moored DOCK 3/8" 1/2" 5/8" 3/4"** GUIDE still used in dock and anchorSamsonRope.com lines where its excellent elasticity allows nylon. In addition to carrying up to one-half of the load, the composite genoa or LINEreplacing the halyards on a traditional > Internal and external abrasion inspection information Quik-Splice is a fast-splicing single braid constructed than underway. Protect your investment (9 mm) (12 mm) (16 mm) (18 mm) with high-strength Ultra Blue copolymer olefin fiber. it to absorb shock loads. cover serves to protect the core from abrasion or ultraviolet schooner,Boat look for Samson.LENGTH It assures you of performance 2019 Size FEET > Splice Instructions It floats and has high wet and dry abrasion resistance. Samson anchor lines are shipped with a prespliced degradation, to provideand grip give on yourselfwinches a or little in clutches peace of and mind 4,900 lb 8,200 lb 13,500 lb 22,200 lb The introduction of polyester fiber allowed rope manufacturers to you can depend on, anytime, anyplace. Download it at The Ultra Blue fiber has excellent dielectric properties high-strength, reinforced captive thimble. Smaller stoppers, and to provideby ensuringprotection that from you’ve friction- got the best SamsonRope.com and provides superior resistance to sunlight diameters are shipped in convenient, reusable plastic build ropes that were as strong as nylon, but with much less stretch dock and anchor lines available. 15–25 ft 10'   generated heat. degradation. tote boxes. Longer lengths on spools are available. and wet-strength loss. Because it has excellent grip, it works well > TECHNOLOGY Staffed with dedicated scientists and Contact your local Samson dealer for more information. on winches. Polyester ropes, particularly polyester double braids, For applications that Isrequire there higher really strength a difference? and lighter 26–30 ft 15'   SPECIFICATIONS Available in 500 ft. spools becameTECH the standard TIP: againstHALYARDS which all ropes were measured. weight than traditionalYes. Class All Samson I fibers linesprovide, are youbuilt withwill look application engineers, Samson’s R&D department is Size Size Strength Weight dedicated to problem solving, and leads the industry in Diameter Diameter Average Per 100 ft. Polyester is still regarded as an excellent fiber for many marine to a core-dependant100% double premium braid. Innylon this thatconstruction, provides the 31–35 ft 20' INCHES MILLIMETER POUNDS POUNDS the development of lighter, stronger, more durable ropes. ANCHOR LINE SELECTION GUIDE applicationsUpgrade and is Your widely used Halyards for covers on high-performance, core is made from Classexcellent II fibers stretch and and serves flexibility. as the Nylon’sstrength 1/4 in. 6 mm 1,400 lb 1.1 lb Equally important to product innovation is our ability to Strengths are approximate averages of new rope. or high-modulus double braids. member while the elasticcover iselongation typically made properties of Class help I fibers.smooth 5/16 in. 8 mm 2,500 lb 1.7 lb Have you ever had a difficult time furling your jib when the 36–40 ft 25'    ™ ™ ™ stand confidently behind our products with accurate, Boat Size Gold-N-Braid Super Strong Pro-Set out the surge effects of wakes, waves, wind, ™ 3/8 in. 9 mm 3,500 lb 2.7 lb High-modulusbreeze picked up? fibers: Many times,Which thisone, is duefor towhat, an old and halyard why? reliable product specifications based on rigorous testing Selma Fids Single braids are orropes heavy designed seas, making without nylon a separate the perfect core. fiber in. 11 mm lb 3.5 lb 3/8 in. 3/8 in. 3/8 in. that is stretching. This causes your jib to sag at the luff, and 7/16 4,600 15–25 ft There are several modern high-modulus fibers, each with a unique Samson manufacturesfor dock a wideand anchorvariety oflines. single All ofbraids. Samson’s For and 41–50measuring. ft 30'   Made from highly polished stainless steel, Selma Fids are 4,500 lb 4,900 lb 3,600 lb keeps the furler from spinning freely. patented worldwide. Available in sets only, the Selma 1/2 in. 12 mm 6,700 lb 4.7 lb set of characteristics. The challenge of the rope designer is to match sailing applications,colored the most dock common lines are singleproduced braid with is a 3/8 in. 3/8 in. 1/2 in. > PRODUCTS Samson products are considered state of the Fid may be used to splice hollow braided lines 9/16 in. 14 mm 7,500 lb 6.0 lb 26–30 ft these characteristics with the unique performance requirements 12-strand line. Where necessary or desired, covers can be 51–60 ft 35' 4,500 lb 4,900 lb 6,300 lb Upgrade your halyards to any of Samson’s low-stretch, solution-dyed nylon to prevent bleed or fade.    from 1/8" to 9/16", or double braid and 5/8 in. 16 mm 10,900 lb 7.8 lb of the application for which they are designing. added to single braids to protect them from exposure to art by sailors around the world. Samson has pioneered 3/8 in. 3/8 in. 1/2 in. lightweight, high-strength options, and watch your jib furl the use of new synthetic fibers, unique constructions, 3-strand rope up to 1-1/8". 31–35 ft Dyneema® is a high-modulus polyethylene (HMPE) fiber with a heat, abrasion, or cuttingConsistent while in use.quality from 4,500 lb 4,900 lb 6,300 lb easier under all conditions. and 61–75coatings ft to 40'improve & 50' the service life of ropes, reduce  Product Code: 903 ™ particularly well balanced set of characteristics that allow it to be the company that moors Accessory Cord Product Code: 480 1/2 in. 1/2 in. 5/8 in. ® 36–40 ft Alternately, a sailor may opt to strip the cover from a double weight, reduce snagging, enhance abrasion resistance, Dyneema is a registered With a polyester cover and nylon core, 7,900 lb 8,600 lb 10,000 lb used in a variety of applications. Extremely lightweight with ultra-high more vessels than any other *For storm conditions upgrade one size and double chafe protection. trademark of Royal DSM N.V. braid in order to save additional weight aloft for halyard and**3/4" make dock splicinglines are available easier. in black and navy blue only. Samson’s Accessory Cord has excellent 1/2 in. 1/2 in. 5/8 in. strength, very low stretch, and excellent abrasion, cut, Our recreational marine products are Dyneema® is DSM’s high-performance 41–50 ft applications. The cover remains intact in areas on the rope flexibility, knotting, and strength characteristics 7,900 lb 8,600 lb 10,000 lb and UV resistance,Use it a is blended-core well-suited for use halyard in halyards, on a controljib subjected to the same rigorous testing > MANUFACTURING Samson’s standards of manufacturing polyethylene product. where the rope is cleated or winched. for a smooth running, torque-free cord. 5/8 in. 5/8 in. 3/4 in. lines, and sheets. and quality control under which we guarantee a quality product every time. Our 51–60 ft furler so you do not stretch the sail Formulas for calculating TRADEMARK NOTICES: SPECIFICATIONS Available in 500 ft. spools 14,000 lb 15,200 lb 13,500 lb CUSTOM DOCK LINES ® ® Other high-modulus fibers include aramid fibers that blend very high Splicing techniques: produce mooring lines and hawsers manufacturing plants, in Lafayette, Louisianacustom dock and lines: AmSteel and AmSteel -Blue are registered trademarks Size Size Strength Weight 3/4 in. 3/4 in. 7/8 in. beyond its design. for some of the world’s largest Ferndale, Washington are both ISO certified and utilize of Samson Rope Technologies, Inc. Diameter Diameter Average Per 100 ft. 61–75 ft strength, low stretch, and abrasion resistance with extreme heat All Samson named products herein are trademarks of INCHES MILLIMETER POUNDS POUNDS 19,400 lb 18,800 lb 19,000 lb Why is knowing the classvessels. of myThey line are important?also professionally LEAN manufacturing principles. Bow Lines = 1-1/2 × Beam resistance; liquid crystal polymer (LCP) fibers; and PBO fibers, which Samson Rope Technologies, Inc. 5/64 in. 2 mm 230 lb 0.20 lb 7/8 in. 1 in. Splicing techniques are different between Class I and 76–90 ft offer the highest strength of all the high-modulus fibers; however, it prespliced, with thimbles included 29,000 lb 25,000 lb Class II ropes and reflect the differences in strengths and > SERVICE World-class service and support, Spring wheneverLines = 3/4 × you Length Over All 1/8 in. 3 mm 600 lb 0.50 lb must be protected from UV light. These are all exceptionally low- on all anchor lines. 1 in. grip between the two groups. It is absolutely critical to use need it, wherever you need it. 5/32 in. 4 mm 1,000 lb 0.80 lb 91–100 ft creep fibers. Stern Lines = 1-1/2 to 2 × Beam 36,000 lb the correct splice for the class of rope being used. The Visit SamsonRope.com for detailed 3/16 in. 5 mm 1,200 lb 1.4 lb > EXPERIENCE When you sail with Samson, your boat carries 1 in. In some cases, Samson blends fibers to take advantage of the product specifications include rope construction, class and 1/4 in. 6 mm 2,200 lb 1.8 lb 101–120 ft splice instructions, available in 36,000 lb relative properties of each of the components. See our product recommended splicing technique. the legacy of our 140+ years’ experience providing rope 9/32 in. 7 mm 2,800 lb 2.3 lb descriptions for more information. to diverse industries. Known for excellence and quality, video and PDF formats 5/16 in. 8 mm 3,500 lb 3.0 lb we have the experience, integrity, and reliability you can 3/8 in. 9 mm 4,300 lb 3.8 lb get only from The Strongest Name in Rope. ANCHOR LINE LENGTHS 2090 Thornton Street,

™ ™ ™ Diameter Gold-N-Braid Super Strong Pro-Set Ferndale, WA 98248 USA INCHES FEET FEET FEET Tel 01.360.384.4669 3/8 in. 100', 150', 200' 100', 150', 200' 100', 150' Fax 01.360.384.0572 1/2 in. 100', 150', 200' 100', 150', 200', 250', 300' 100', 150', 200', 300' SamsonRope.com 5/8 in. 200', 250' 150', 200', 250', 300' 150', 200', 250' © 2016/2019 Samson Rope Technologies, Inc. All rights reserved. 2680 1.5K 06/2019 JIB/GENOA SHEETS HALYARDS For Main, Jib/Genoa, & Halyards  LINE SELECTION GUIDE SIZE CRUISER CRUISER/RACER HIGH-TECH RACER SIZE CRUISER CRUISER/RACER HIGH-TECH RACER

15' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 15' 6mm XLS3 6mm XLS3 3mm Tech-12, 6mm MLX3, WarpSpeed II ® 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 20' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 20' 6mm XLS3 6mm MLX3, XLS3, WarpSpeed II Racing or cruising, Samson makes a line for every application I Hoist of genoa, 6mm WarpSpeed II, GPX, AmSteel®

Sheets, halyards, and control lines all require different characteristics in strength and stretch. In these charts, you'll find a Samson line deck to sheeves 25' 8mm Control-DPX,Trophy, XLS3 8mm Control-DPX, MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX ® P 6mm WarpSpeed II 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 engineered for your size boat, the type of sailing you do, and its function in your rig. For sheets, use your and the sheet load 25' 8mm XLS3 ® 9mm Control-DPX, Trophy 9mm Control-DPX 8mm MLX3, XLS3 6mm WarpSpeed II, GPX, AmSteel formula provided to determine the appropriate size/strength for your boat and the wind conditions you expect to encounter. P Hoist of 30' 6mm GPX, WarpSpeed II 9mm Control-DPX top of boom to sheeves 10mm XLS3 10mm MLX3, XLS3 ® 8mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lighting Rope, Validator-12 To calculate typical loads on sheets for genoas, , end of boom mainsheets, spinnaker guys and sheets, the following formula I 10mm XLS3 8mm GPX, WarpSpeed II 30' 10mm XLS3 ® E Foot of main from back 35' 11mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm WarpSpeed II, GPX, AmSteel can be used (not applicable to multi-hull vessels): 11mm Control-DPX, Trophy 11mm Control-DPX ® of to end of boom 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 2 9mm WarpSpeed II 10mm GPX 35' 10mm XLS3 (windspeed) × .004 × (sail area in square feet) = sheet load at clew in pounds 40' 12mm Control-DPX, Trophy, XLS3 12mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 12mm Control-DPX J Stem fitting to ® 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 To calculate sail area based on your sail plan, use the following formulas: E front of mast 9mm WarpSpeed II 10mm GPX 40' 12mm XLS3 45' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3, ® 12mm Control-DPX 12mm MLX3, XLS3 8mm AmSteel, WarpSpeed II, GPX 100% fore triangle = 1/2J × I mainsail = 1/2E × P J ® 9mm WarpSpeed II 10mm GPX 11mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 50' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3 45' 12mm XLS3 ® 12mm Control-DPX 12mm MLX3 8mm GPX, AmSteel 9mm WarpSpeed II 11mm WarpSpeed II 8mm AmSteel®-Blue, Tech-12, Lightning Rope, Validator-12 50' 10mm MLX3 CONTROL LINES For Topping Lifts, Fore Guys, Boom Vangs & Cunninghams 12mm MLX3 9mm AmSteel,® 10mm GPX 11mm WarpSpeed II BREAK STRENGTH VS. ELASTIC STIFFNESS HALYARDS F E C B A C A SIZE CRUISER CRUISER/RACER HIGH-TECH RACER NOTE: The high-tech racer may wish to break down the halyards more specifically and in the same diameters as follows: When selecting a sailing line, the most commonly cited specification—break strength— is often NOT A Main Halyard B (not shown) ® ® Main: Validator-12; GPX Spinnaker: WarpSpeed II the most critical. For nearly all applications on a recreational sailboat, the strength of modern lines far 5mm AmSteel 5mm AmSteel -Blue, Lightning Rope, Tech-12 Usage: Hoist or lower mainsail 15' 6mm XLS3 C 6mm XLS3 6mm GPX, WarpSpeed II exceeds both the load that it will experience and the strength of the hardware connected to it. Other MAINSHEETS End of Boom Sheeting B Jib/Genoa Halyard ® ® characteristics, such as size, hand, weight, coefficient of friction, and flexibility are more important criteria Usage: Hoist or lower jib/genoa 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 20' SIZE CRUISER CRUISER/RACER HIGH-TECH RACER for selection. Of these— elastic stiffness, or stretchiness of the line—is most critical. Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II C Spinnaker Halyard 6mm Control-DPX, MLX3, Elastic stiffness is the resistance of a line to stretch under load. This is determined by the size, material, ® ® 15' 6mm Control-DPX, Trophy, XLS3 6mm Control-DPX, GPX, WarpSpeed II Usage: Hoist or lower spinnaker I 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12, XLS3, Ultra-Lite and construction of the line; and this is what sailors care about, because it impacts the way the rope 25' D H Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II handles. Before we can define the elastic stiffness of a rope, we must define one more thing: strain. Strain SHEETS 8mm Control-DPX, MLX3, XLS3, 6mm GPX, WarpSpeed II G 8mm Control-DPX, 8mm AmSteel®, Control-DPX, 6mm AmSteel®-Blue, GPX, WarpSpeed II 20' 8mm Control-DPX, Trophy, XLS3 is the percentage change in length of an object when under the load. The higher the elastic stiffness, the D Mainsheets Usage: In or out trim of mainsail 30' Ultra-Lite 8mm Control-DPX Trophy, XLS3 MLX3, XLS3 8mm Control-DPX less a line will elongate under load. In other words, the higher the elastic stiffness, the lower the strain. Usage: In or out trim of jib 8mm Control-DPX, MLX3, 6mm GPX, WarpSpeed II E Jib/Genoa Sheets ® ® 25' 8mm Control-DPX, Trophy, XLS3 8mm Control-DPX, 8mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 XLS3, Ultra-Lite 8mm Control-DPX What does this mean, and how do we select the optimum stiffness of a line? Lines that control sail Spinnaker Sheet Usage: In or out trim of spinnaker 35' F Trophy, XLS3 MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX camber, such as halyards, , cunninghams, or jib sheets, benefit most from high stiffness. If, when 8mm Control-DPX 9mm Trophy 8mm Control-DPX G Spinnaker Usage: In or out trim of H ® ® 30' 8mm Control-DPX, GPX, WarpSpeed II beating to windward in a fresh breeze with your sail in the ideal trim, you are hit by a puff, the pressure 9mm Control-DPX, 9mm AmSteel, Control-DPX, 6mm AmSteel -Blue, Lightning Rope, Tech-12 10mm XLS3 10mm MLX3, XLS3 40' on the sail would increase and thus the load on all the lines controlling that sail shape would increase— CONTROL LINES Trophy 10mm XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 9mm Control-DPX 8mm Control-DPX 10 mm XLS3 8mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II 35' causing them to elongate. This elongation increases the depth of the sail camber, increasing both lift H Usage: Up or down adjustment of spinnaker pole 10mm XLS3 9mm AmSteel® 10mm MLX3, XLS3 6mm AmSteel®-Blue, Lightning Rope, Tech-12 11mm Trophy 10mm MLX3, XLS3 10mm GPX and drag on a sail. 45' I Fore Guy Usage: Downward tensioner for spinnaker pole 11mm Control-DPX, Trophy 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX F 11mm Control-DPX 11mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II There are cases where choosing a line with some stretch (lower elastic stiffness) is beneficial. A boom ® 40' J Usage: Tensioner—usually downward for boom I 12mm Control-DPX, 10mm MLX3, XLS3 8mm AmSteel -Blue, Lightning Rope, Tech-12 12mm Trophy, XLS3 12mm MLX3, XLS3 10mm GPX vang that is able to stretch when a puff hits allows the mainsail to twist and dump power from the head 50' ® Usage: Tensioner for mainsail Trophy, XLS3 11mm AmSteel, 12mm Control-DPX 9mm WarpSpeed II, 10mm GPX, 12mm Control-DPX 11mm Control-DPX 11mm Control-DPX 10mm GPX of the sail, thus preventing the boat from being overpowered. Similarly, using a lower stiffness line for a K 45' 12mm Trophy, XLS3 12mm MLX3 11mm Control-DPX, WarpSpeed II boom is advisable, since it lowers the shock load on hardware and deck fittings. G D E J K 12mm Control-DPX 10mm GPX 11mm WarpSpeed II Samson running and rigging lines allow sailors to select the appropriate lines for the desired elastic SPINNAKER SHEETS 50' 12mm Control-DPX, MLX3 stiffness, based on your use and equipment. SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 16mm Trophy 12mm Control-DPX 6mm Control-DPX, 6mm Control-DPX, MLX3, 15' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II ELASTIC STIFFNESS Approximate average in kN (kilonewtons) BREAKING STRENGTHS Approximate average in pounds Trophy, XLS3 Ultra-Lite SPINNAKER GUYS SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 6mm Control-DPX, 6mm Control-DPX, MLX3, DIAMETER DIAMETER 20' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" Trophy, XLS3 Ultra-Lite 15' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II ® ® AmSteel-Blue 330 490 980 1,500 2,500 3,400 4,300 5,900 7,600 AmSteel-Blue 1,600 2,500 5,400 8,600 13,700 19,600 23,900 34,000 40,500 8mm Control-DPX, 8mm Control-DPX, MLX3, ® ® 20' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II AmSteel 1,200 1,900 2,700 3,300 4,600 5,900 AmSteel 7,400 10,500 15,500 18,000 27,500 34,000 25' 6mm GPX, WarpSpeed II 8mm Control-DPX, Ultra-Lite Trophy, XLS3 Ultra-Lite ™ ™ 25' N/A 8mm Control-DPX, MLX3, XLS3 8mm Control-DPX, 6mm GPX, WarpSpeed II Lightning Rope 240 310 720 1,100 1,900 2,600 3,000 4,400 5,600 Lightning Rope 1,400 2,100 5,400 7,900 13,500 18,500 20,600 32,000 41,600 9mm Control-DPX, Trophy 9mm Control-DPX, Ultra-Lite 30' 8mm GPX, WarpSpeed II 9mm Control-DPX, Ultra-Lite Tech-12™ 290 590 880 1,500 2,000 Tech-12™ 2,800 5,600 8,200 13,000 18,000 10mm XLS3 10mm MLX3 30' 8mm Control-DPX, 9mm XLS3 9mm Control-DPX 10mm MLX3 8mm GPX, WarpSpeed II 9mm Control-DPX Validator-12™ 180 240 480 840 1,400 1,800 2,400 3,400 4,200 Validator-12™ 2,000 2,700 5,500 9,400 14,000 19,500 23,500 35,000 43,000 SINGLE BRAIDS SINGLE BRAIDS 10mm XLS3 9mm Ultra-Lite 10mm MLX3 8mm GPX, WarpSpeed II 9mm Ultra-Lite 35' 35' 10mm XLS3 11mm Control-DPX 10mm MLX3 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX Control-DPX™ 540 720 1,200 1,400 1,900 Control-DPX™ 3,700 5,600 9,300 11,000 14,000 11mm Control-DPX, Trophy 11mm Control-DPX 11mm Control-DPX

™ ™ 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX GPX 1,000 1,600 2,500 3,300 4,800 GPX 5,300 7,600 13,600 20,300 29,200 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 40' 40' 12mm XLS3 12mm MLX3 11mm Control-DPX WarpSpeed II™ 850 1,200 1,700 2,400 2,900 4,400 WarpSpeed II™ 5,100 6,200 9,800 14,000 21,000 26,500 12mm Trophy, XLS3 12mm MLX3, XLS3 11mm Control-DPX 11mm WarpSpeed II 10mm GPX 11mm WarpSpeed II MLX3™ 570 970 1,500 1,900 2,500 MLX3™ 3,400 4,500 7,700 12,000 17,200 12mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 45' 12mm Control-DPX 45' 12mm Control-DPX, XLS3 12mm Control-DPX 12mm Control-DPX Ultra-Lite™ 150 300 550 700 Ultra-Lite™ 1,200 2,200 2,900 4,400 MLX3, XLS3 12mm Control-DPX 12mm Control-DPX, 10mm GPX 11mm WarpSpeed II XLS3™ 80 110 190 280 390 530 XLS3™ 1,700 2,400 4,100 6,300 8,700 11,700 11mm WarpSpeed II, 11mm GPX, WarpSpeed II DOUBLE BRAIDS DOUBLE BRAIDS 50' 12mm Control-DPX 50' 12mm Control-DPX MLX3, XLS3 12mm Control-DPX, MLX3 12mm Control-DPX 12mm Control-DPX Trophy Braid™ 40 80 110 150 230 290 Trophy Braid™ 800 1,400 2,000 3,000 4,000 6,000

® ® ™ ™ ™ ™ AmSteel-Blue Product Code: 872 AmSteel Product Code: 870 Lightning Rope Product Code: 379 Tech-12 Product Code: 890 Validator-12 Product Code: 446 Control-DPX Product Code: 888 ® ® FEATURES: FEATURES: ™ This 12-strand single braid is made from FEATURES: An economical alternative to AmSteel-Blue, FEATURES: This 12-strand construction blends Vectran FEATURES: This Samthane-coated 12-strand is made Validator-12 is a 12-strand construction Control-DPX combines Dyneema® fiber and FEATURES: ® ® ® ® > Easy to splice ® ™ 100% Dyneema, which provides the > Size-for-size, the same AmSteel is a non-rotational rope that yields > High strength and Dyneema fibers into a reliable, > High strength-to with 100% and offers excellent made of 100% Vectran. This easy- > High strength-to- Samson’s patented DPX fiber technology > High strength weight ratio maximum strength-to-weight ratio. It is strength as wire rope high strength and low stretch. It is flexible, > Extremely low stretch lightweight line with very low stretch and weight ratio heat resistance, in addition to a high > Samthane coated to-splice, no-creep line is extremely into a strong, lightweight line that is winch- > Low stretch > Extremely low stretch lightweight, floats, and has high abrasion > Extremely low stretch easily spliced, and resists flex-fatigue > Floats resistance to creep elongation. > Extremely low stretch resistance to flex fatigue. > Works well around strong and lightweight. and -friendly while being incredibly > Solid grip on sheaves and winches > Negligible creep and cut resistance. Cover where winch or > Lightweight and abrasion. > Easy to splice easy on the hands. It performs well where winch drums CONSTRUCTION: > Excellent heat resistance > Samthane coated rope clutches are used. > Floats > Extremely lightweight 12-strand single braid winches are required without an added cover, > Runs through blocks > Non-rotational > Non-rotational without kinking > Superior wear and > Wire rope replacement FIBER: while retaining the great “feel” you want in > Negligible creep ™ flex fatigue LCP-HMPE blend > Heat resistant a mainsheet or guy. Control-DPX is not > Easy to handle CONSTRUCTION: > Torque-free construction > Wire rope > Excellent durability recommended for use with self-tailing winches. > Lightweight 12-strand single braid COLORS: replacement > Easily spliced Black, blue, green, or red > Abrasion resistant > Easy to splice FIBER: CONSTRUCTION: > UV stabilized HMPE SPLICE/CLASS: > Wire rope replacement CONSTRUCTION: 12-Strand Class II 12-strand single braid 12-strand single braid CONSTRUCTION: COLORS: CONSTRUCTION: FIBER: Aramid 12-strand single braid Gray, red, blue, green, 12-strand single braid FIBER: FIBER: HMPE orange, and yellow COLORS: FIBER: LCP HMPE-Polyester blend Black, blue, green, or red COLORS: SPLICE/CLASS: COLORS: COLORS: Blue, some sizes also available 12-Strand Class II SPLICE/CLASS: Black, blue, green, or red White with black, blue, by special order in black, gray, 12-Strand Class II green, red, or white tracers green, orange, red, or yellow SPLICE/CLASS: 12-Strand Class II SPLICE/CLASS: SPLICE/CLASS: 12-Strand Class II 12-Strand Class II

™ ™ ™ ™ ™ ™ NEW! GPX Product Code: 437 WarpSpeed II Product Code: 440 NEW! MLX3 Product Code: 436 Ultra-Lite Product Code: 441 NEW! XLS3 Product Code: 435 Trophy Braid Product Code: 453 Samson’s highest-performing line, GPX’s FEATURES: The strength member in this double FEATURES: MLX3 is a lightweight, core-dependent line FEATURES: Great for light-wind sheets. This lightweight, FEATURES: XLS3 is an update to a classic line — FEATURES: Trophy Braid line has a soft, fuzzy cover FEATURES: core is a custom blend of Dyneema® SK99 > Highest strength braid is 100% Dyneema®, with a flexible > High strength with excellent strength and moderate stretch. > High strength floating double braid has a 24-strand MFP > Floats now stronger and more responsive with > Excellent abrasion that is easy on the hands. This double > Easy to hold, wet or dry and DM20, providing the highest possible and stiffness 24-strand polyester cover. Strip the cover > Extremely low stretch The core is coated to match the cover, > Lightweight cover and a blended core of MFP and > High strength an updated look. Cruising sailors looking resistance braid construction has a spun polyester > Holds well in all elastic stiffness and virtually no creep. The > Minimal creep and to save weight. > Lightweight making the line strippable for greater > Moderate stretch Dyneema®. > Low stretch for optimal performance will appreciate the > Easy to splice cover and a polyester core. types of cleats lowest stretch specially-blended cover provides superior > Excellent abrasion weight savings. > Coated core matches low-stretch polyester construction, smooth > Great value using > Has a solid grip on CONSTRUCTION: winch drums grip, excellent durability, and heat resistance. > Lightweight resistance cover Core-dependent double braid rendering, and long life of XLS3. learnings from our > Blended, strippable cover elite-level rope CONSTRUCTION: CONSTRUCTION: CONSTRUCTION: FIBER (Core/Cover): for improved traction Double braid Core-dependent double braid Core-dependent HMPE blend / Polypropylene CONSTRUCTION: Double braid FIBER (Core/Cover): CONSTRUCTION: FIBER (Core/Cover): double braid COLORS: Polyester / Spun Polyester Core-dependent double braid HMPE / Polyester FIBER (Core/Cover): Black, blue, green, or red — FIBER (Core/Cover): all with yellow tracers Polyester / Polyester COLORS: FIBER (Core/Cover): COLORS: HMPE blend / Polyester Black, blue, green, HMPE / Aramid-Polyester blend Variegated beige with black, COLORS: SPLICE/CLASS: COLORS: red, COLORS: blue, green, or red and Slate with midnight, ocean, Double Braid Class II White with midnight, ocean, or white — all with Carbon with midnight, ocean, matching cores daybreak or dawn tracers daybreak or dawn tracers and solid navy, khaki, a green and red ID daybreak or dawn tracers SPLICE/CLASS: and matching cores and white SPLICE/CLASS: and matching cores Double Braid Class II SPLICE/CLASS: Double Braid Class I SUNSET SPLICE/CLASS: MIDNIGHT Double Braid Class II OCEAN SPLICE/CLASS: Double Braid Class II Double Braid Class I JIB/GENOA SHEETS HALYARDS For Main, Jib/Genoa, & Spinnaker Halyards  LINE SELECTION GUIDE SIZE CRUISER CRUISER/RACER HIGH-TECH RACER SIZE CRUISER CRUISER/RACER HIGH-TECH RACER

15' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 15' 6mm XLS3 6mm XLS3 3mm Tech-12, 6mm MLX3, WarpSpeed II ® 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 20' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 20' 6mm XLS3 6mm MLX3, XLS3, WarpSpeed II Racing or cruising, Samson makes a line for every application I Hoist of genoa, 6mm WarpSpeed II, GPX, AmSteel®

Sheets, halyards, and control lines all require different characteristics in strength and stretch. In these charts, you'll find a Samson line deck to sheeves 25' 8mm Control-DPX,Trophy, XLS3 8mm Control-DPX, MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX ® P 6mm WarpSpeed II 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 engineered for your size boat, the type of sailing you do, and its function in your rig. For sheets, use your sail plan and the sheet load 25' 8mm XLS3 ® 9mm Control-DPX, Trophy 9mm Control-DPX 8mm MLX3, XLS3 6mm WarpSpeed II, GPX, AmSteel formula provided to determine the appropriate size/strength for your boat and the wind conditions you expect to encounter. P Hoist of mainsail 30' 6mm GPX, WarpSpeed II 9mm Control-DPX top of boom to sheeves 10mm XLS3 10mm MLX3, XLS3 ® 8mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lighting Rope, Validator-12 To calculate typical loads on sheets for genoas, jibs, end of boom mainsheets, spinnaker guys and sheets, the following formula I 10mm XLS3 8mm GPX, WarpSpeed II 30' 10mm XLS3 ® E Foot of main from back 35' 11mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm WarpSpeed II, GPX, AmSteel can be used (not applicable to multi-hull vessels): 11mm Control-DPX, Trophy 11mm Control-DPX ® of mast to end of boom 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 2 9mm WarpSpeed II 10mm GPX 35' 10mm XLS3 (windspeed) × .004 × (sail area in square feet) = sheet load at clew in pounds 40' 12mm Control-DPX, Trophy, XLS3 12mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 12mm Control-DPX J Stem fitting to ® 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 To calculate sail area based on your sail plan, use the following formulas: E front of mast 9mm WarpSpeed II 10mm GPX 40' 12mm XLS3 45' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3, ® 12mm Control-DPX 12mm MLX3, XLS3 8mm AmSteel, WarpSpeed II, GPX 100% fore triangle = 1/2J × I mainsail = 1/2E × P J ® 9mm WarpSpeed II 10mm GPX 11mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 50' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3 45' 12mm XLS3 ® 12mm Control-DPX 12mm MLX3 8mm GPX, AmSteel 9mm WarpSpeed II 11mm WarpSpeed II 8mm AmSteel®-Blue, Tech-12, Lightning Rope, Validator-12 50' 10mm MLX3 CONTROL LINES For Topping Lifts, Fore Guys, Boom Vangs & Cunninghams 12mm MLX3 9mm AmSteel,® 10mm GPX 11mm WarpSpeed II BREAK STRENGTH VS. ELASTIC STIFFNESS HALYARDS F E C B A C A SIZE CRUISER CRUISER/RACER HIGH-TECH RACER NOTE: The high-tech racer may wish to break down the halyards more specifically and in the same diameters as follows: When selecting a sailing line, the most commonly cited specification—break strength— is often NOT A Main Halyard B (not shown) ® ® Main: Validator-12; GPX Spinnaker: WarpSpeed II the most critical. For nearly all applications on a recreational sailboat, the strength of modern lines far 5mm AmSteel 5mm AmSteel -Blue, Lightning Rope, Tech-12 Usage: Hoist or lower mainsail 15' 6mm XLS3 C 6mm XLS3 6mm GPX, WarpSpeed II exceeds both the load that it will experience and the strength of the hardware connected to it. Other MAINSHEETS End of Boom Sheeting B Jib/Genoa Halyard ® ® characteristics, such as size, hand, weight, coefficient of friction, and flexibility are more important criteria Usage: Hoist or lower jib/genoa 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 20' SIZE CRUISER CRUISER/RACER HIGH-TECH RACER for selection. Of these— elastic stiffness, or stretchiness of the line—is most critical. Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II C Spinnaker Halyard 6mm Control-DPX, MLX3, Elastic stiffness is the resistance of a line to stretch under load. This is determined by the size, material, ® ® 15' 6mm Control-DPX, Trophy, XLS3 6mm Control-DPX, GPX, WarpSpeed II Usage: Hoist or lower spinnaker I 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12, XLS3, Ultra-Lite and construction of the line; and this is what sailors care about, because it impacts the way the rope 25' D H Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II handles. Before we can define the elastic stiffness of a rope, we must define one more thing: strain. Strain SHEETS 8mm Control-DPX, MLX3, XLS3, 6mm GPX, WarpSpeed II G 8mm Control-DPX, 8mm AmSteel®, Control-DPX, 6mm AmSteel®-Blue, GPX, WarpSpeed II 20' 8mm Control-DPX, Trophy, XLS3 is the percentage change in length of an object when under the load. The higher the elastic stiffness, the D Mainsheets Usage: In or out trim of mainsail 30' Ultra-Lite 8mm Control-DPX Trophy, XLS3 MLX3, XLS3 8mm Control-DPX less a line will elongate under load. In other words, the higher the elastic stiffness, the lower the strain. Usage: In or out trim of jib 8mm Control-DPX, MLX3, 6mm GPX, WarpSpeed II E Jib/Genoa Sheets ® ® 25' 8mm Control-DPX, Trophy, XLS3 8mm Control-DPX, 8mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 XLS3, Ultra-Lite 8mm Control-DPX What does this mean, and how do we select the optimum stiffness of a line? Lines that control sail Spinnaker Sheet Usage: In or out trim of spinnaker 35' F Trophy, XLS3 MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX camber, such as halyards, outhauls, cunninghams, or jib sheets, benefit most from high stiffness. If, when 8mm Control-DPX 9mm Trophy 8mm Control-DPX G Spinnaker Guy Usage: In or out trim of spinnaker pole H ® ® 30' 8mm Control-DPX, GPX, WarpSpeed II beating to windward in a fresh breeze with your sail in the ideal trim, you are hit by a puff, the pressure 9mm Control-DPX, 9mm AmSteel, Control-DPX, 6mm AmSteel -Blue, Lightning Rope, Tech-12 10mm XLS3 10mm MLX3, XLS3 40' on the sail would increase and thus the load on all the lines controlling that sail shape would increase— CONTROL LINES Trophy 10mm XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 9mm Control-DPX 8mm Control-DPX 10 mm XLS3 8mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II 35' causing them to elongate. This elongation increases the depth of the sail camber, increasing both lift H Topping Lift Usage: Up or down adjustment of spinnaker pole 10mm XLS3 9mm AmSteel® 10mm MLX3, XLS3 6mm AmSteel®-Blue, Lightning Rope, Tech-12 11mm Trophy 10mm MLX3, XLS3 10mm GPX and drag on a sail. 45' I Fore Guy Usage: Downward tensioner for spinnaker pole 11mm Control-DPX, Trophy 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX F 11mm Control-DPX 11mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II There are cases where choosing a line with some stretch (lower elastic stiffness) is beneficial. A boom ® 40' J Boom Vang Usage: Tensioner—usually downward for boom I 12mm Control-DPX, 10mm MLX3, XLS3 8mm AmSteel -Blue, Lightning Rope, Tech-12 12mm Trophy, XLS3 12mm MLX3, XLS3 10mm GPX vang that is able to stretch when a puff hits allows the mainsail to twist and dump power from the head 50' ® Cunningham Usage: Tensioner for mainsail Trophy, XLS3 11mm AmSteel, 12mm Control-DPX 9mm WarpSpeed II, 10mm GPX, 12mm Control-DPX 11mm Control-DPX 11mm Control-DPX 10mm GPX of the sail, thus preventing the boat from being overpowered. Similarly, using a lower stiffness line for a K 45' 12mm Trophy, XLS3 12mm MLX3 11mm Control-DPX, WarpSpeed II boom preventer is advisable, since it lowers the shock load on hardware and deck fittings. G D E J K 12mm Control-DPX 10mm GPX 11mm WarpSpeed II Samson running and rigging lines allow sailors to select the appropriate lines for the desired elastic SPINNAKER SHEETS 50' 12mm Control-DPX, MLX3 stiffness, based on your use and equipment. SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 16mm Trophy 12mm Control-DPX 6mm Control-DPX, 6mm Control-DPX, MLX3, 15' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II ELASTIC STIFFNESS Approximate average in kN (kilonewtons) BREAKING STRENGTHS Approximate average in pounds Trophy, XLS3 Ultra-Lite SPINNAKER GUYS SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 6mm Control-DPX, 6mm Control-DPX, MLX3, DIAMETER DIAMETER 20' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" Trophy, XLS3 Ultra-Lite 15' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II ® ® AmSteel-Blue 330 490 980 1,500 2,500 3,400 4,300 5,900 7,600 AmSteel-Blue 1,600 2,500 5,400 8,600 13,700 19,600 23,900 34,000 40,500 8mm Control-DPX, 8mm Control-DPX, MLX3, ® ® 20' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II AmSteel 1,200 1,900 2,700 3,300 4,600 5,900 AmSteel 7,400 10,500 15,500 18,000 27,500 34,000 25' 6mm GPX, WarpSpeed II 8mm Control-DPX, Ultra-Lite Trophy, XLS3 Ultra-Lite ™ ™ 25' N/A 8mm Control-DPX, MLX3, XLS3 8mm Control-DPX, 6mm GPX, WarpSpeed II Lightning Rope 240 310 720 1,100 1,900 2,600 3,000 4,400 5,600 Lightning Rope 1,400 2,100 5,400 7,900 13,500 18,500 20,600 32,000 41,600 9mm Control-DPX, Trophy 9mm Control-DPX, Ultra-Lite 30' 8mm GPX, WarpSpeed II 9mm Control-DPX, Ultra-Lite Tech-12™ 290 590 880 1,500 2,000 Tech-12™ 2,800 5,600 8,200 13,000 18,000 10mm XLS3 10mm MLX3 30' 8mm Control-DPX, 9mm XLS3 9mm Control-DPX 10mm MLX3 8mm GPX, WarpSpeed II 9mm Control-DPX Validator-12™ 180 240 480 840 1,400 1,800 2,400 3,400 4,200 Validator-12™ 2,000 2,700 5,500 9,400 14,000 19,500 23,500 35,000 43,000 SINGLE BRAIDS SINGLE BRAIDS 10mm XLS3 9mm Ultra-Lite 10mm MLX3 8mm GPX, WarpSpeed II 9mm Ultra-Lite 35' 35' 10mm XLS3 11mm Control-DPX 10mm MLX3 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX Control-DPX™ 540 720 1,200 1,400 1,900 Control-DPX™ 3,700 5,600 9,300 11,000 14,000 11mm Control-DPX, Trophy 11mm Control-DPX 11mm Control-DPX

™ ™ 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX GPX 1,000 1,600 2,500 3,300 4,800 GPX 5,300 7,600 13,600 20,300 29,200 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 40' 40' 12mm XLS3 12mm MLX3 11mm Control-DPX WarpSpeed II™ 850 1,200 1,700 2,400 2,900 4,400 WarpSpeed II™ 5,100 6,200 9,800 14,000 21,000 26,500 12mm Trophy, XLS3 12mm MLX3, XLS3 11mm Control-DPX 11mm WarpSpeed II 10mm GPX 11mm WarpSpeed II MLX3™ 570 970 1,500 1,900 2,500 MLX3™ 3,400 4,500 7,700 12,000 17,200 12mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 45' 12mm Control-DPX 45' 12mm Control-DPX, XLS3 12mm Control-DPX 12mm Control-DPX Ultra-Lite™ 150 300 550 700 Ultra-Lite™ 1,200 2,200 2,900 4,400 MLX3, XLS3 12mm Control-DPX 12mm Control-DPX, 10mm GPX 11mm WarpSpeed II XLS3™ 80 110 190 280 390 530 XLS3™ 1,700 2,400 4,100 6,300 8,700 11,700 11mm WarpSpeed II, 11mm GPX, WarpSpeed II DOUBLE BRAIDS DOUBLE BRAIDS 50' 12mm Control-DPX 50' 12mm Control-DPX MLX3, XLS3 12mm Control-DPX, MLX3 12mm Control-DPX 12mm Control-DPX Trophy Braid™ 40 80 110 150 230 290 Trophy Braid™ 800 1,400 2,000 3,000 4,000 6,000

® ® ™ ™ ™ ™ AmSteel-Blue Product Code: 872 AmSteel Product Code: 870 Lightning Rope Product Code: 379 Tech-12 Product Code: 890 Validator-12 Product Code: 446 Control-DPX Product Code: 888 ® ® FEATURES: FEATURES: ™ This 12-strand single braid is made from FEATURES: An economical alternative to AmSteel-Blue, FEATURES: This 12-strand construction blends Vectran FEATURES: This Samthane-coated 12-strand is made Validator-12 is a 12-strand construction Control-DPX combines Dyneema® fiber and FEATURES: ® ® ® ® > Easy to splice ® ™ 100% Dyneema, which provides the > Size-for-size, the same AmSteel is a non-rotational rope that yields > High strength and Dyneema fibers into a reliable, > High strength-to with 100% Technora and offers excellent made of 100% Vectran. This easy- > High strength-to- Samson’s patented DPX fiber technology > High strength weight ratio maximum strength-to-weight ratio. It is strength as wire rope high strength and low stretch. It is flexible, > Extremely low stretch lightweight line with very low stretch and weight ratio heat resistance, in addition to a high > Samthane coated to-splice, no-creep line is extremely into a strong, lightweight line that is winch- > Low stretch > Extremely low stretch lightweight, floats, and has high abrasion > Extremely low stretch easily spliced, and resists flex-fatigue > Floats resistance to creep elongation. > Extremely low stretch resistance to flex fatigue. > Works well around strong and lightweight. and cleat-friendly while being incredibly > Solid grip on sheaves and winches > Negligible creep and cut resistance. Cover where winch or > Lightweight and abrasion. > Easy to splice easy on the hands. It performs well where winch drums CONSTRUCTION: > Excellent heat resistance > Samthane coated rope clutches are used. > Floats > Extremely lightweight 12-strand single braid winches are required without an added cover, > Runs through blocks > Non-rotational > Non-rotational without kinking > Superior wear and > Wire rope replacement FIBER: while retaining the great “feel” you want in > Negligible creep ™ flex fatigue LCP-HMPE blend > Heat resistant a mainsheet or guy. Control-DPX is not > Easy to handle CONSTRUCTION: > Torque-free construction > Wire rope > Excellent durability recommended for use with self-tailing winches. > Lightweight 12-strand single braid COLORS: replacement > Easily spliced Black, blue, green, or red > Abrasion resistant > Easy to splice FIBER: CONSTRUCTION: > UV stabilized HMPE SPLICE/CLASS: > Wire rope replacement CONSTRUCTION: 12-Strand Class II 12-strand single braid 12-strand single braid CONSTRUCTION: COLORS: CONSTRUCTION: FIBER: Aramid 12-strand single braid Gray, red, blue, green, 12-strand single braid FIBER: FIBER: HMPE orange, and yellow COLORS: FIBER: LCP HMPE-Polyester blend Black, blue, green, or red COLORS: SPLICE/CLASS: COLORS: COLORS: Blue, some sizes also available 12-Strand Class II SPLICE/CLASS: Black, blue, green, or red White with black, blue, by special order in black, gray, 12-Strand Class II green, red, or white tracers green, orange, red, or yellow SPLICE/CLASS: 12-Strand Class II SPLICE/CLASS: SPLICE/CLASS: 12-Strand Class II 12-Strand Class II

™ ™ ™ ™ ™ ™ NEW! GPX Product Code: 437 WarpSpeed II Product Code: 440 NEW! MLX3 Product Code: 436 Ultra-Lite Product Code: 441 NEW! XLS3 Product Code: 435 Trophy Braid Product Code: 453 Samson’s highest-performing line, GPX’s FEATURES: The strength member in this double FEATURES: MLX3 is a lightweight, core-dependent line FEATURES: Great for light-wind sheets. This lightweight, FEATURES: XLS3 is an update to a classic line — FEATURES: Trophy Braid line has a soft, fuzzy cover FEATURES: core is a custom blend of Dyneema® SK99 > Highest strength braid is 100% Dyneema®, with a flexible > High strength with excellent strength and moderate stretch. > High strength floating double braid has a 24-strand MFP > Floats now stronger and more responsive with > Excellent abrasion that is easy on the hands. This double > Easy to hold, wet or dry and DM20, providing the highest possible and stiffness 24-strand polyester cover. Strip the cover > Extremely low stretch The core is coated to match the cover, > Lightweight cover and a blended core of MFP and > High strength an updated look. Cruising sailors looking resistance braid construction has a spun polyester > Holds well in all elastic stiffness and virtually no creep. The > Minimal creep and to save weight. > Lightweight making the line strippable for greater > Moderate stretch Dyneema®. > Low stretch for optimal performance will appreciate the > Easy to splice cover and a polyester core. types of cleats lowest stretch specially-blended cover provides superior > Excellent abrasion weight savings. > Coated core matches low-stretch polyester construction, smooth > Great value using > Has a solid grip on CONSTRUCTION: winch drums grip, excellent durability, and heat resistance. > Lightweight resistance cover Core-dependent double braid rendering, and long life of XLS3. learnings from our > Blended, strippable cover elite-level rope CONSTRUCTION: CONSTRUCTION: CONSTRUCTION: FIBER (Core/Cover): for improved traction Double braid Core-dependent double braid Core-dependent HMPE blend / Polypropylene CONSTRUCTION: Double braid FIBER (Core/Cover): CONSTRUCTION: FIBER (Core/Cover): double braid COLORS: Polyester / Spun Polyester Core-dependent double braid HMPE / Polyester FIBER (Core/Cover): Black, blue, green, or red — FIBER (Core/Cover): all with yellow tracers Polyester / Polyester COLORS: FIBER (Core/Cover): COLORS: HMPE blend / Polyester Black, blue, green, HMPE / Aramid-Polyester blend Variegated beige with black, COLORS: SPLICE/CLASS: COLORS: red, COLORS: blue, green, or red and Slate with midnight, ocean, Double Braid Class II White with midnight, ocean, or white — all with Carbon with midnight, ocean, matching cores daybreak or dawn tracers daybreak or dawn tracers and solid navy, khaki, a green and red ID daybreak or dawn tracers SPLICE/CLASS: and matching cores and white SPLICE/CLASS: and matching cores Double Braid Class II SPLICE/CLASS: Double Braid Class I SUNSET SPLICE/CLASS: MIDNIGHT Double Braid Class II OCEAN SPLICE/CLASS: Double Braid Class II Double Braid Class I JIB/GENOA SHEETS HALYARDS For Main, Jib/Genoa, & Spinnaker Halyards  LINE SELECTION GUIDE SIZE CRUISER CRUISER/RACER HIGH-TECH RACER SIZE CRUISER CRUISER/RACER HIGH-TECH RACER

15' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 15' 6mm XLS3 6mm XLS3 3mm Tech-12, 6mm MLX3, WarpSpeed II ® 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 20' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 20' 6mm XLS3 6mm MLX3, XLS3, WarpSpeed II Racing or cruising, Samson makes a line for every application I Hoist of genoa, 6mm WarpSpeed II, GPX, AmSteel®

Sheets, halyards, and control lines all require different characteristics in strength and stretch. In these charts, you'll find a Samson line deck to sheeves 25' 8mm Control-DPX,Trophy, XLS3 8mm Control-DPX, MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX ® P 6mm WarpSpeed II 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 engineered for your size boat, the type of sailing you do, and its function in your rig. For sheets, use your sail plan and the sheet load 25' 8mm XLS3 ® 9mm Control-DPX, Trophy 9mm Control-DPX 8mm MLX3, XLS3 6mm WarpSpeed II, GPX, AmSteel formula provided to determine the appropriate size/strength for your boat and the wind conditions you expect to encounter. P Hoist of mainsail 30' 6mm GPX, WarpSpeed II 9mm Control-DPX top of boom to sheeves 10mm XLS3 10mm MLX3, XLS3 ® 8mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lighting Rope, Validator-12 To calculate typical loads on sheets for genoas, jibs, end of boom mainsheets, spinnaker guys and sheets, the following formula I 10mm XLS3 8mm GPX, WarpSpeed II 30' 10mm XLS3 ® E Foot of main from back 35' 11mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm WarpSpeed II, GPX, AmSteel can be used (not applicable to multi-hull vessels): 11mm Control-DPX, Trophy 11mm Control-DPX ® of mast to end of boom 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 2 9mm WarpSpeed II 10mm GPX 35' 10mm XLS3 (windspeed) × .004 × (sail area in square feet) = sheet load at clew in pounds 40' 12mm Control-DPX, Trophy, XLS3 12mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 12mm Control-DPX J Stem fitting to ® 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 To calculate sail area based on your sail plan, use the following formulas: E front of mast 9mm WarpSpeed II 10mm GPX 40' 12mm XLS3 45' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3, ® 12mm Control-DPX 12mm MLX3, XLS3 8mm AmSteel, WarpSpeed II, GPX 100% fore triangle = 1/2J × I mainsail = 1/2E × P J ® 9mm WarpSpeed II 10mm GPX 11mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 50' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3 45' 12mm XLS3 ® 12mm Control-DPX 12mm MLX3 8mm GPX, AmSteel 9mm WarpSpeed II 11mm WarpSpeed II 8mm AmSteel®-Blue, Tech-12, Lightning Rope, Validator-12 50' 10mm MLX3 CONTROL LINES For Topping Lifts, Fore Guys, Boom Vangs & Cunninghams 12mm MLX3 9mm AmSteel,® 10mm GPX 11mm WarpSpeed II BREAK STRENGTH VS. ELASTIC STIFFNESS HALYARDS F E C B A C A SIZE CRUISER CRUISER/RACER HIGH-TECH RACER NOTE: The high-tech racer may wish to break down the halyards more specifically and in the same diameters as follows: When selecting a sailing line, the most commonly cited specification—break strength— is often NOT A Main Halyard B (not shown) ® ® Main: Validator-12; GPX Spinnaker: WarpSpeed II the most critical. For nearly all applications on a recreational sailboat, the strength of modern lines far 5mm AmSteel 5mm AmSteel -Blue, Lightning Rope, Tech-12 Usage: Hoist or lower mainsail 15' 6mm XLS3 C 6mm XLS3 6mm GPX, WarpSpeed II exceeds both the load that it will experience and the strength of the hardware connected to it. Other MAINSHEETS End of Boom Sheeting B Jib/Genoa Halyard ® ® characteristics, such as size, hand, weight, coefficient of friction, and flexibility are more important criteria Usage: Hoist or lower jib/genoa 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 20' SIZE CRUISER CRUISER/RACER HIGH-TECH RACER for selection. Of these— elastic stiffness, or stretchiness of the line—is most critical. Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II C Spinnaker Halyard 6mm Control-DPX, MLX3, Elastic stiffness is the resistance of a line to stretch under load. This is determined by the size, material, ® ® 15' 6mm Control-DPX, Trophy, XLS3 6mm Control-DPX, GPX, WarpSpeed II Usage: Hoist or lower spinnaker I 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12, XLS3, Ultra-Lite and construction of the line; and this is what sailors care about, because it impacts the way the rope 25' D H Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II handles. Before we can define the elastic stiffness of a rope, we must define one more thing: strain. Strain SHEETS 8mm Control-DPX, MLX3, XLS3, 6mm GPX, WarpSpeed II G 8mm Control-DPX, 8mm AmSteel®, Control-DPX, 6mm AmSteel®-Blue, GPX, WarpSpeed II 20' 8mm Control-DPX, Trophy, XLS3 is the percentage change in length of an object when under the load. The higher the elastic stiffness, the D Mainsheets Usage: In or out trim of mainsail 30' Ultra-Lite 8mm Control-DPX Trophy, XLS3 MLX3, XLS3 8mm Control-DPX less a line will elongate under load. In other words, the higher the elastic stiffness, the lower the strain. Usage: In or out trim of jib 8mm Control-DPX, MLX3, 6mm GPX, WarpSpeed II E Jib/Genoa Sheets ® ® 25' 8mm Control-DPX, Trophy, XLS3 8mm Control-DPX, 8mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 XLS3, Ultra-Lite 8mm Control-DPX What does this mean, and how do we select the optimum stiffness of a line? Lines that control sail Spinnaker Sheet Usage: In or out trim of spinnaker 35' F Trophy, XLS3 MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX camber, such as halyards, outhauls, cunninghams, or jib sheets, benefit most from high stiffness. If, when 8mm Control-DPX 9mm Trophy 8mm Control-DPX G Spinnaker Guy Usage: In or out trim of spinnaker pole H ® ® 30' 8mm Control-DPX, GPX, WarpSpeed II beating to windward in a fresh breeze with your sail in the ideal trim, you are hit by a puff, the pressure 9mm Control-DPX, 9mm AmSteel, Control-DPX, 6mm AmSteel -Blue, Lightning Rope, Tech-12 10mm XLS3 10mm MLX3, XLS3 40' on the sail would increase and thus the load on all the lines controlling that sail shape would increase— CONTROL LINES Trophy 10mm XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 9mm Control-DPX 8mm Control-DPX 10 mm XLS3 8mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II 35' causing them to elongate. This elongation increases the depth of the sail camber, increasing both lift H Topping Lift Usage: Up or down adjustment of spinnaker pole 10mm XLS3 9mm AmSteel® 10mm MLX3, XLS3 6mm AmSteel®-Blue, Lightning Rope, Tech-12 11mm Trophy 10mm MLX3, XLS3 10mm GPX and drag on a sail. 45' I Fore Guy Usage: Downward tensioner for spinnaker pole 11mm Control-DPX, Trophy 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX F 11mm Control-DPX 11mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II There are cases where choosing a line with some stretch (lower elastic stiffness) is beneficial. A boom ® 40' J Boom Vang Usage: Tensioner—usually downward for boom I 12mm Control-DPX, 10mm MLX3, XLS3 8mm AmSteel -Blue, Lightning Rope, Tech-12 12mm Trophy, XLS3 12mm MLX3, XLS3 10mm GPX vang that is able to stretch when a puff hits allows the mainsail to twist and dump power from the head 50' ® Cunningham Usage: Tensioner for mainsail Trophy, XLS3 11mm AmSteel, 12mm Control-DPX 9mm WarpSpeed II, 10mm GPX, 12mm Control-DPX 11mm Control-DPX 11mm Control-DPX 10mm GPX of the sail, thus preventing the boat from being overpowered. Similarly, using a lower stiffness line for a K 45' 12mm Trophy, XLS3 12mm MLX3 11mm Control-DPX, WarpSpeed II boom preventer is advisable, since it lowers the shock load on hardware and deck fittings. G D E J K 12mm Control-DPX 10mm GPX 11mm WarpSpeed II Samson running and rigging lines allow sailors to select the appropriate lines for the desired elastic SPINNAKER SHEETS 50' 12mm Control-DPX, MLX3 stiffness, based on your use and equipment. SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 16mm Trophy 12mm Control-DPX 6mm Control-DPX, 6mm Control-DPX, MLX3, 15' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II ELASTIC STIFFNESS Approximate average in kN (kilonewtons) BREAKING STRENGTHS Approximate average in pounds Trophy, XLS3 Ultra-Lite SPINNAKER GUYS SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 6mm Control-DPX, 6mm Control-DPX, MLX3, DIAMETER DIAMETER 20' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" Trophy, XLS3 Ultra-Lite 15' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II ® ® AmSteel-Blue 330 490 980 1,500 2,500 3,400 4,300 5,900 7,600 AmSteel-Blue 1,600 2,500 5,400 8,600 13,700 19,600 23,900 34,000 40,500 8mm Control-DPX, 8mm Control-DPX, MLX3, ® ® 20' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II AmSteel 1,200 1,900 2,700 3,300 4,600 5,900 AmSteel 7,400 10,500 15,500 18,000 27,500 34,000 25' 6mm GPX, WarpSpeed II 8mm Control-DPX, Ultra-Lite Trophy, XLS3 Ultra-Lite ™ ™ 25' N/A 8mm Control-DPX, MLX3, XLS3 8mm Control-DPX, 6mm GPX, WarpSpeed II Lightning Rope 240 310 720 1,100 1,900 2,600 3,000 4,400 5,600 Lightning Rope 1,400 2,100 5,400 7,900 13,500 18,500 20,600 32,000 41,600 9mm Control-DPX, Trophy 9mm Control-DPX, Ultra-Lite 30' 8mm GPX, WarpSpeed II 9mm Control-DPX, Ultra-Lite Tech-12™ 290 590 880 1,500 2,000 Tech-12™ 2,800 5,600 8,200 13,000 18,000 10mm XLS3 10mm MLX3 30' 8mm Control-DPX, 9mm XLS3 9mm Control-DPX 10mm MLX3 8mm GPX, WarpSpeed II 9mm Control-DPX Validator-12™ 180 240 480 840 1,400 1,800 2,400 3,400 4,200 Validator-12™ 2,000 2,700 5,500 9,400 14,000 19,500 23,500 35,000 43,000 SINGLE BRAIDS SINGLE BRAIDS 10mm XLS3 9mm Ultra-Lite 10mm MLX3 8mm GPX, WarpSpeed II 9mm Ultra-Lite 35' 35' 10mm XLS3 11mm Control-DPX 10mm MLX3 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX Control-DPX™ 540 720 1,200 1,400 1,900 Control-DPX™ 3,700 5,600 9,300 11,000 14,000 11mm Control-DPX, Trophy 11mm Control-DPX 11mm Control-DPX

™ ™ 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX GPX 1,000 1,600 2,500 3,300 4,800 GPX 5,300 7,600 13,600 20,300 29,200 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 40' 40' 12mm XLS3 12mm MLX3 11mm Control-DPX WarpSpeed II™ 850 1,200 1,700 2,400 2,900 4,400 WarpSpeed II™ 5,100 6,200 9,800 14,000 21,000 26,500 12mm Trophy, XLS3 12mm MLX3, XLS3 11mm Control-DPX 11mm WarpSpeed II 10mm GPX 11mm WarpSpeed II MLX3™ 570 970 1,500 1,900 2,500 MLX3™ 3,400 4,500 7,700 12,000 17,200 12mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 45' 12mm Control-DPX 45' 12mm Control-DPX, XLS3 12mm Control-DPX 12mm Control-DPX Ultra-Lite™ 150 300 550 700 Ultra-Lite™ 1,200 2,200 2,900 4,400 MLX3, XLS3 12mm Control-DPX 12mm Control-DPX, 10mm GPX 11mm WarpSpeed II XLS3™ 80 110 190 280 390 530 XLS3™ 1,700 2,400 4,100 6,300 8,700 11,700 11mm WarpSpeed II, 11mm GPX, WarpSpeed II DOUBLE BRAIDS DOUBLE BRAIDS 50' 12mm Control-DPX 50' 12mm Control-DPX MLX3, XLS3 12mm Control-DPX, MLX3 12mm Control-DPX 12mm Control-DPX Trophy Braid™ 40 80 110 150 230 290 Trophy Braid™ 800 1,400 2,000 3,000 4,000 6,000

® ® ™ ™ ™ ™ AmSteel-Blue Product Code: 872 AmSteel Product Code: 870 Lightning Rope Product Code: 379 Tech-12 Product Code: 890 Validator-12 Product Code: 446 Control-DPX Product Code: 888 ® ® FEATURES: FEATURES: ™ This 12-strand single braid is made from FEATURES: An economical alternative to AmSteel-Blue, FEATURES: This 12-strand construction blends Vectran FEATURES: This Samthane-coated 12-strand is made Validator-12 is a 12-strand construction Control-DPX combines Dyneema® fiber and FEATURES: ® ® ® ® > Easy to splice ® ™ 100% Dyneema, which provides the > Size-for-size, the same AmSteel is a non-rotational rope that yields > High strength and Dyneema fibers into a reliable, > High strength-to with 100% Technora and offers excellent made of 100% Vectran. This easy- > High strength-to- Samson’s patented DPX fiber technology > High strength weight ratio maximum strength-to-weight ratio. It is strength as wire rope high strength and low stretch. It is flexible, > Extremely low stretch lightweight line with very low stretch and weight ratio heat resistance, in addition to a high > Samthane coated to-splice, no-creep line is extremely into a strong, lightweight line that is winch- > Low stretch > Extremely low stretch lightweight, floats, and has high abrasion > Extremely low stretch easily spliced, and resists flex-fatigue > Floats resistance to creep elongation. > Extremely low stretch resistance to flex fatigue. > Works well around strong and lightweight. and cleat-friendly while being incredibly > Solid grip on sheaves and winches > Negligible creep and cut resistance. Cover where winch or > Lightweight and abrasion. > Easy to splice easy on the hands. It performs well where winch drums CONSTRUCTION: > Excellent heat resistance > Samthane coated rope clutches are used. > Floats > Extremely lightweight 12-strand single braid winches are required without an added cover, > Runs through blocks > Non-rotational > Non-rotational without kinking > Superior wear and > Wire rope replacement FIBER: while retaining the great “feel” you want in > Negligible creep ™ flex fatigue LCP-HMPE blend > Heat resistant a mainsheet or guy. Control-DPX is not > Easy to handle CONSTRUCTION: > Torque-free construction > Wire rope > Excellent durability recommended for use with self-tailing winches. > Lightweight 12-strand single braid COLORS: replacement > Easily spliced Black, blue, green, or red > Abrasion resistant > Easy to splice FIBER: CONSTRUCTION: > UV stabilized HMPE SPLICE/CLASS: > Wire rope replacement CONSTRUCTION: 12-Strand Class II 12-strand single braid 12-strand single braid CONSTRUCTION: COLORS: CONSTRUCTION: FIBER: Aramid 12-strand single braid Gray, red, blue, green, 12-strand single braid FIBER: FIBER: HMPE orange, and yellow COLORS: FIBER: LCP HMPE-Polyester blend Black, blue, green, or red COLORS: SPLICE/CLASS: COLORS: COLORS: Blue, some sizes also available 12-Strand Class II SPLICE/CLASS: Black, blue, green, or red White with black, blue, by special order in black, gray, 12-Strand Class II green, red, or white tracers green, orange, red, or yellow SPLICE/CLASS: 12-Strand Class II SPLICE/CLASS: SPLICE/CLASS: 12-Strand Class II 12-Strand Class II

™ ™ ™ ™ ™ ™ NEW! GPX Product Code: 437 WarpSpeed II Product Code: 440 NEW! MLX3 Product Code: 436 Ultra-Lite Product Code: 441 NEW! XLS3 Product Code: 435 Trophy Braid Product Code: 453 Samson’s highest-performing line, GPX’s FEATURES: The strength member in this double FEATURES: MLX3 is a lightweight, core-dependent line FEATURES: Great for light-wind sheets. This lightweight, FEATURES: XLS3 is an update to a classic line — FEATURES: Trophy Braid line has a soft, fuzzy cover FEATURES: core is a custom blend of Dyneema® SK99 > Highest strength braid is 100% Dyneema®, with a flexible > High strength with excellent strength and moderate stretch. > High strength floating double braid has a 24-strand MFP > Floats now stronger and more responsive with > Excellent abrasion that is easy on the hands. This double > Easy to hold, wet or dry and DM20, providing the highest possible and stiffness 24-strand polyester cover. Strip the cover > Extremely low stretch The core is coated to match the cover, > Lightweight cover and a blended core of MFP and > High strength an updated look. Cruising sailors looking resistance braid construction has a spun polyester > Holds well in all elastic stiffness and virtually no creep. The > Minimal creep and to save weight. > Lightweight making the line strippable for greater > Moderate stretch Dyneema®. > Low stretch for optimal performance will appreciate the > Easy to splice cover and a polyester core. types of cleats lowest stretch specially-blended cover provides superior > Excellent abrasion weight savings. > Coated core matches low-stretch polyester construction, smooth > Great value using > Has a solid grip on CONSTRUCTION: winch drums grip, excellent durability, and heat resistance. > Lightweight resistance cover Core-dependent double braid rendering, and long life of XLS3. learnings from our > Blended, strippable cover elite-level rope CONSTRUCTION: CONSTRUCTION: CONSTRUCTION: FIBER (Core/Cover): for improved traction Double braid Core-dependent double braid Core-dependent HMPE blend / Polypropylene CONSTRUCTION: Double braid FIBER (Core/Cover): CONSTRUCTION: FIBER (Core/Cover): double braid COLORS: Polyester / Spun Polyester Core-dependent double braid HMPE / Polyester FIBER (Core/Cover): Black, blue, green, or red — FIBER (Core/Cover): all with yellow tracers Polyester / Polyester COLORS: FIBER (Core/Cover): COLORS: HMPE blend / Polyester Black, blue, green, HMPE / Aramid-Polyester blend Variegated beige with black, COLORS: SPLICE/CLASS: COLORS: red, COLORS: blue, green, or red and Slate with midnight, ocean, Double Braid Class II White with midnight, ocean, or white — all with Carbon with midnight, ocean, matching cores daybreak or dawn tracers daybreak or dawn tracers and solid navy, khaki, a green and red ID daybreak or dawn tracers SPLICE/CLASS: and matching cores and white SPLICE/CLASS: and matching cores Double Braid Class II SPLICE/CLASS: Double Braid Class I SUNSET SPLICE/CLASS: MIDNIGHT Double Braid Class II OCEAN SPLICE/CLASS: Double Braid Class II Double Braid Class I JIB/GENOA SHEETS HALYARDS For Main, Jib/Genoa, & Spinnaker Halyards  LINE SELECTION GUIDE SIZE CRUISER CRUISER/RACER HIGH-TECH RACER SIZE CRUISER CRUISER/RACER HIGH-TECH RACER

15' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 15' 6mm XLS3 6mm XLS3 3mm Tech-12, 6mm MLX3, WarpSpeed II ® 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 20' 6mm Control-DPX,Trophy 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II 20' 6mm XLS3 6mm MLX3, XLS3, WarpSpeed II Racing or cruising, Samson makes a line for every application I Hoist of genoa, 6mm WarpSpeed II, GPX, AmSteel®

Sheets, halyards, and control lines all require different characteristics in strength and stretch. In these charts, you'll find a Samson line deck to sheeves 25' 8mm Control-DPX,Trophy, XLS3 8mm Control-DPX, MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX ® P 6mm WarpSpeed II 5mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 engineered for your size boat, the type of sailing you do, and its function in your rig. For sheets, use your sail plan and the sheet load 25' 8mm XLS3 ® 9mm Control-DPX, Trophy 9mm Control-DPX 8mm MLX3, XLS3 6mm WarpSpeed II, GPX, AmSteel formula provided to determine the appropriate size/strength for your boat and the wind conditions you expect to encounter. P Hoist of mainsail 30' 6mm GPX, WarpSpeed II 9mm Control-DPX top of boom to sheeves 10mm XLS3 10mm MLX3, XLS3 ® 8mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lighting Rope, Validator-12 To calculate typical loads on sheets for genoas, jibs, end of boom mainsheets, spinnaker guys and sheets, the following formula I 10mm XLS3 8mm GPX, WarpSpeed II 30' 10mm XLS3 ® E Foot of main from back 35' 11mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm WarpSpeed II, GPX, AmSteel can be used (not applicable to multi-hull vessels): 11mm Control-DPX, Trophy 11mm Control-DPX ® of mast to end of boom 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 2 9mm WarpSpeed II 10mm GPX 35' 10mm XLS3 (windspeed) × .004 × (sail area in square feet) = sheet load at clew in pounds 40' 12mm Control-DPX, Trophy, XLS3 12mm Control-DPX, MLX3, XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 12mm Control-DPX J Stem fitting to ® 9mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 To calculate sail area based on your sail plan, use the following formulas: E front of mast 9mm WarpSpeed II 10mm GPX 40' 12mm XLS3 45' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3, ® 12mm Control-DPX 12mm MLX3, XLS3 8mm AmSteel, WarpSpeed II, GPX 100% fore triangle = 1/2J × I mainsail = 1/2E × P J ® 9mm WarpSpeed II 10mm GPX 11mm WarpSpeed II 6mm AmSteel-Blue, Tech-12, Lightning Rope, Validator-12 50' 12mm Control-DPX, XLS3 12mm Control-DPX, MLX3 45' 12mm XLS3 ® 12mm Control-DPX 12mm MLX3 8mm GPX, AmSteel 9mm WarpSpeed II 11mm WarpSpeed II 8mm AmSteel®-Blue, Tech-12, Lightning Rope, Validator-12 50' 10mm MLX3 CONTROL LINES For Topping Lifts, Fore Guys, Boom Vangs & Cunninghams 12mm MLX3 9mm AmSteel,® 10mm GPX 11mm WarpSpeed II BREAK STRENGTH VS. ELASTIC STIFFNESS HALYARDS F E C B A C A SIZE CRUISER CRUISER/RACER HIGH-TECH RACER NOTE: The high-tech racer may wish to break down the halyards more specifically and in the same diameters as follows: When selecting a sailing line, the most commonly cited specification—break strength— is often NOT A Main Halyard B (not shown) ® ® Main: Validator-12; GPX Spinnaker: WarpSpeed II the most critical. For nearly all applications on a recreational sailboat, the strength of modern lines far 5mm AmSteel 5mm AmSteel -Blue, Lightning Rope, Tech-12 Usage: Hoist or lower mainsail 15' 6mm XLS3 C 6mm XLS3 6mm GPX, WarpSpeed II exceeds both the load that it will experience and the strength of the hardware connected to it. Other MAINSHEETS End of Boom Sheeting B Jib/Genoa Halyard ® ® characteristics, such as size, hand, weight, coefficient of friction, and flexibility are more important criteria Usage: Hoist or lower jib/genoa 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 20' SIZE CRUISER CRUISER/RACER HIGH-TECH RACER for selection. Of these— elastic stiffness, or stretchiness of the line—is most critical. Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II C Spinnaker Halyard 6mm Control-DPX, MLX3, Elastic stiffness is the resistance of a line to stretch under load. This is determined by the size, material, ® ® 15' 6mm Control-DPX, Trophy, XLS3 6mm Control-DPX, GPX, WarpSpeed II Usage: Hoist or lower spinnaker I 6mm Control-DPX, 6mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12, XLS3, Ultra-Lite and construction of the line; and this is what sailors care about, because it impacts the way the rope 25' D H Trophy, XLS3 MLX3, XLS3 6mm Control-DPX, GPX, WarpSpeed II handles. Before we can define the elastic stiffness of a rope, we must define one more thing: strain. Strain SHEETS 8mm Control-DPX, MLX3, XLS3, 6mm GPX, WarpSpeed II G 8mm Control-DPX, 8mm AmSteel®, Control-DPX, 6mm AmSteel®-Blue, GPX, WarpSpeed II 20' 8mm Control-DPX, Trophy, XLS3 is the percentage change in length of an object when under the load. The higher the elastic stiffness, the D Mainsheets Usage: In or out trim of mainsail 30' Ultra-Lite 8mm Control-DPX Trophy, XLS3 MLX3, XLS3 8mm Control-DPX less a line will elongate under load. In other words, the higher the elastic stiffness, the lower the strain. Usage: In or out trim of jib 8mm Control-DPX, MLX3, 6mm GPX, WarpSpeed II E Jib/Genoa Sheets ® ® 25' 8mm Control-DPX, Trophy, XLS3 8mm Control-DPX, 8mm AmSteel, Control-DPX, 5mm AmSteel -Blue, Lightning Rope, Tech-12 XLS3, Ultra-Lite 8mm Control-DPX What does this mean, and how do we select the optimum stiffness of a line? Lines that control sail Spinnaker Sheet Usage: In or out trim of spinnaker 35' F Trophy, XLS3 MLX3, XLS3 6mm GPX, WarpSpeed II 8mm Control-DPX camber, such as halyards, outhauls, cunninghams, or jib sheets, benefit most from high stiffness. If, when 8mm Control-DPX 9mm Trophy 8mm Control-DPX G Spinnaker Guy Usage: In or out trim of spinnaker pole H ® ® 30' 8mm Control-DPX, GPX, WarpSpeed II beating to windward in a fresh breeze with your sail in the ideal trim, you are hit by a puff, the pressure 9mm Control-DPX, 9mm AmSteel, Control-DPX, 6mm AmSteel -Blue, Lightning Rope, Tech-12 10mm XLS3 10mm MLX3, XLS3 40' on the sail would increase and thus the load on all the lines controlling that sail shape would increase— CONTROL LINES Trophy 10mm XLS3 10mm MLX3, XLS3 8mm GPX, WarpSpeed II 9mm Control-DPX 8mm Control-DPX 10 mm XLS3 8mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II 35' causing them to elongate. This elongation increases the depth of the sail camber, increasing both lift H Topping Lift Usage: Up or down adjustment of spinnaker pole 10mm XLS3 9mm AmSteel® 10mm MLX3, XLS3 6mm AmSteel®-Blue, Lightning Rope, Tech-12 11mm Trophy 10mm MLX3, XLS3 10mm GPX and drag on a sail. 45' I Fore Guy Usage: Downward tensioner for spinnaker pole 11mm Control-DPX, Trophy 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX F 11mm Control-DPX 11mm Control-DPX 8mm Control-DPX 9mm WarpSpeed II There are cases where choosing a line with some stretch (lower elastic stiffness) is beneficial. A boom ® 40' J Boom Vang Usage: Tensioner—usually downward for boom I 12mm Control-DPX, 10mm MLX3, XLS3 8mm AmSteel -Blue, Lightning Rope, Tech-12 12mm Trophy, XLS3 12mm MLX3, XLS3 10mm GPX vang that is able to stretch when a puff hits allows the mainsail to twist and dump power from the head 50' ® Cunningham Usage: Tensioner for mainsail Trophy, XLS3 11mm AmSteel, 12mm Control-DPX 9mm WarpSpeed II, 10mm GPX, 12mm Control-DPX 11mm Control-DPX 11mm Control-DPX 10mm GPX of the sail, thus preventing the boat from being overpowered. Similarly, using a lower stiffness line for a K 45' 12mm Trophy, XLS3 12mm MLX3 11mm Control-DPX, WarpSpeed II boom preventer is advisable, since it lowers the shock load on hardware and deck fittings. G D E J K 12mm Control-DPX 10mm GPX 11mm WarpSpeed II Samson running and rigging lines allow sailors to select the appropriate lines for the desired elastic SPINNAKER SHEETS 50' 12mm Control-DPX, MLX3 stiffness, based on your use and equipment. SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 16mm Trophy 12mm Control-DPX 6mm Control-DPX, 6mm Control-DPX, MLX3, 15' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II ELASTIC STIFFNESS Approximate average in kN (kilonewtons) BREAKING STRENGTHS Approximate average in pounds Trophy, XLS3 Ultra-Lite SPINNAKER GUYS SIZE CRUISER CRUISER/RACER HIGH-TECH RACER 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 2.5 mm 3mm 5 mm 6 mm 8 mm 9mm 10 mm 11 mm 12 mm 14 mm 6mm Control-DPX, 6mm Control-DPX, MLX3, DIAMETER DIAMETER 20' 6mm Control-DPX, Ultra-Lite, GPX, WarpSpeed II 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 13/32" 7/16" 1/2" 9/16" Trophy, XLS3 Ultra-Lite 15' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II ® ® AmSteel-Blue 330 490 980 1,500 2,500 3,400 4,300 5,900 7,600 AmSteel-Blue 1,600 2,500 5,400 8,600 13,700 19,600 23,900 34,000 40,500 8mm Control-DPX, 8mm Control-DPX, MLX3, ® ® 20' N/A 6mm Control-DPX, XLS3 6mm Control-DPX, GPX, WarpSpeed II AmSteel 1,200 1,900 2,700 3,300 4,600 5,900 AmSteel 7,400 10,500 15,500 18,000 27,500 34,000 25' 6mm GPX, WarpSpeed II 8mm Control-DPX, Ultra-Lite Trophy, XLS3 Ultra-Lite ™ ™ 25' N/A 8mm Control-DPX, MLX3, XLS3 8mm Control-DPX, 6mm GPX, WarpSpeed II Lightning Rope 240 310 720 1,100 1,900 2,600 3,000 4,400 5,600 Lightning Rope 1,400 2,100 5,400 7,900 13,500 18,500 20,600 32,000 41,600 9mm Control-DPX, Trophy 9mm Control-DPX, Ultra-Lite 30' 8mm GPX, WarpSpeed II 9mm Control-DPX, Ultra-Lite Tech-12™ 290 590 880 1,500 2,000 Tech-12™ 2,800 5,600 8,200 13,000 18,000 10mm XLS3 10mm MLX3 30' 8mm Control-DPX, 9mm XLS3 9mm Control-DPX 10mm MLX3 8mm GPX, WarpSpeed II 9mm Control-DPX Validator-12™ 180 240 480 840 1,400 1,800 2,400 3,400 4,200 Validator-12™ 2,000 2,700 5,500 9,400 14,000 19,500 23,500 35,000 43,000 SINGLE BRAIDS SINGLE BRAIDS 10mm XLS3 9mm Ultra-Lite 10mm MLX3 8mm GPX, WarpSpeed II 9mm Ultra-Lite 35' 35' 10mm XLS3 11mm Control-DPX 10mm MLX3 11mm Control-DPX 8mm GPX, WarpSpeed II 11mm Control-DPX Control-DPX™ 540 720 1,200 1,400 1,900 Control-DPX™ 3,700 5,600 9,300 11,000 14,000 11mm Control-DPX, Trophy 11mm Control-DPX 11mm Control-DPX

™ ™ 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX GPX 1,000 1,600 2,500 3,300 4,800 GPX 5,300 7,600 13,600 20,300 29,200 11mm Control-DPX 11mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 40' 40' 12mm XLS3 12mm MLX3 11mm Control-DPX WarpSpeed II™ 850 1,200 1,700 2,400 2,900 4,400 WarpSpeed II™ 5,100 6,200 9,800 14,000 21,000 26,500 12mm Trophy, XLS3 12mm MLX3, XLS3 11mm Control-DPX 11mm WarpSpeed II 10mm GPX 11mm WarpSpeed II MLX3™ 570 970 1,500 1,900 2,500 MLX3™ 3,400 4,500 7,700 12,000 17,200 12mm Control-DPX 9mm WarpSpeed II 10mm GPX, MLX3 45' 12mm Control-DPX 45' 12mm Control-DPX, XLS3 12mm Control-DPX 12mm Control-DPX Ultra-Lite™ 150 300 550 700 Ultra-Lite™ 1,200 2,200 2,900 4,400 MLX3, XLS3 12mm Control-DPX 12mm Control-DPX, 10mm GPX 11mm WarpSpeed II XLS3™ 80 110 190 280 390 530 XLS3™ 1,700 2,400 4,100 6,300 8,700 11,700 11mm WarpSpeed II, 11mm GPX, WarpSpeed II DOUBLE BRAIDS DOUBLE BRAIDS 50' 12mm Control-DPX 50' 12mm Control-DPX MLX3, XLS3 12mm Control-DPX, MLX3 12mm Control-DPX 12mm Control-DPX Trophy Braid™ 40 80 110 150 230 290 Trophy Braid™ 800 1,400 2,000 3,000 4,000 6,000

® ® ™ ™ ™ ™ AmSteel-Blue Product Code: 872 AmSteel Product Code: 870 Lightning Rope Product Code: 379 Tech-12 Product Code: 890 Validator-12 Product Code: 446 Control-DPX Product Code: 888 ® ® FEATURES: FEATURES: ™ This 12-strand single braid is made from FEATURES: An economical alternative to AmSteel-Blue, FEATURES: This 12-strand construction blends Vectran FEATURES: This Samthane-coated 12-strand is made Validator-12 is a 12-strand construction Control-DPX combines Dyneema® fiber and FEATURES: ® ® ® ® > Easy to splice ® ™ 100% Dyneema, which provides the > Size-for-size, the same AmSteel is a non-rotational rope that yields > High strength and Dyneema fibers into a reliable, > High strength-to with 100% Technora and offers excellent made of 100% Vectran. This easy- > High strength-to- Samson’s patented DPX fiber technology > High strength weight ratio maximum strength-to-weight ratio. It is strength as wire rope high strength and low stretch. It is flexible, > Extremely low stretch lightweight line with very low stretch and weight ratio heat resistance, in addition to a high > Samthane coated to-splice, no-creep line is extremely into a strong, lightweight line that is winch- > Low stretch > Extremely low stretch lightweight, floats, and has high abrasion > Extremely low stretch easily spliced, and resists flex-fatigue > Floats resistance to creep elongation. > Extremely low stretch resistance to flex fatigue. > Works well around strong and lightweight. and cleat-friendly while being incredibly > Solid grip on sheaves and winches > Negligible creep and cut resistance. Cover where winch or > Lightweight and abrasion. > Easy to splice easy on the hands. It performs well where winch drums CONSTRUCTION: > Excellent heat resistance > Samthane coated rope clutches are used. > Floats > Extremely lightweight 12-strand single braid winches are required without an added cover, > Runs through blocks > Non-rotational > Non-rotational without kinking > Superior wear and > Wire rope replacement FIBER: while retaining the great “feel” you want in > Negligible creep ™ flex fatigue LCP-HMPE blend > Heat resistant a mainsheet or guy. Control-DPX is not > Easy to handle CONSTRUCTION: > Torque-free construction > Wire rope > Excellent durability recommended for use with self-tailing winches. > Lightweight 12-strand single braid COLORS: replacement > Easily spliced Black, blue, green, or red > Abrasion resistant > Easy to splice FIBER: CONSTRUCTION: > UV stabilized HMPE SPLICE/CLASS: > Wire rope replacement CONSTRUCTION: 12-Strand Class II 12-strand single braid 12-strand single braid CONSTRUCTION: COLORS: CONSTRUCTION: FIBER: Aramid 12-strand single braid Gray, red, blue, green, 12-strand single braid FIBER: FIBER: HMPE orange, and yellow COLORS: FIBER: LCP HMPE-Polyester blend Black, blue, green, or red COLORS: SPLICE/CLASS: COLORS: COLORS: Blue, some sizes also available 12-Strand Class II SPLICE/CLASS: Black, blue, green, or red White with black, blue, by special order in black, gray, 12-Strand Class II green, red, or white tracers green, orange, red, or yellow SPLICE/CLASS: 12-Strand Class II SPLICE/CLASS: SPLICE/CLASS: 12-Strand Class II 12-Strand Class II

™ ™ ™ ™ ™ ™ NEW! GPX Product Code: 437 WarpSpeed II Product Code: 440 NEW! MLX3 Product Code: 436 Ultra-Lite Product Code: 441 NEW! XLS3 Product Code: 435 Trophy Braid Product Code: 453 Samson’s highest-performing line, GPX’s FEATURES: The strength member in this double FEATURES: MLX3 is a lightweight, core-dependent line FEATURES: Great for light-wind sheets. This lightweight, FEATURES: XLS3 is an update to a classic line — FEATURES: Trophy Braid line has a soft, fuzzy cover FEATURES: core is a custom blend of Dyneema® SK99 > Highest strength braid is 100% Dyneema®, with a flexible > High strength with excellent strength and moderate stretch. > High strength floating double braid has a 24-strand MFP > Floats now stronger and more responsive with > Excellent abrasion that is easy on the hands. This double > Easy to hold, wet or dry and DM20, providing the highest possible and stiffness 24-strand polyester cover. Strip the cover > Extremely low stretch The core is coated to match the cover, > Lightweight cover and a blended core of MFP and > High strength an updated look. Cruising sailors looking resistance braid construction has a spun polyester > Holds well in all elastic stiffness and virtually no creep. The > Minimal creep and to save weight. > Lightweight making the line strippable for greater > Moderate stretch Dyneema®. > Low stretch for optimal performance will appreciate the > Easy to splice cover and a polyester core. types of cleats lowest stretch specially-blended cover provides superior > Excellent abrasion weight savings. > Coated core matches low-stretch polyester construction, smooth > Great value using > Has a solid grip on CONSTRUCTION: winch drums grip, excellent durability, and heat resistance. > Lightweight resistance cover Core-dependent double braid rendering, and long life of XLS3. learnings from our > Blended, strippable cover elite-level rope CONSTRUCTION: CONSTRUCTION: CONSTRUCTION: FIBER (Core/Cover): for improved traction Double braid Core-dependent double braid Core-dependent HMPE blend / Polypropylene CONSTRUCTION: Double braid FIBER (Core/Cover): CONSTRUCTION: FIBER (Core/Cover): double braid COLORS: Polyester / Spun Polyester Core-dependent double braid HMPE / Polyester FIBER (Core/Cover): Black, blue, green, or red — FIBER (Core/Cover): all with yellow tracers Polyester / Polyester COLORS: FIBER (Core/Cover): COLORS: HMPE blend / Polyester Black, blue, green, HMPE / Aramid-Polyester blend Variegated beige with black, COLORS: SPLICE/CLASS: COLORS: red, COLORS: blue, green, or red and Slate with midnight, ocean, Double Braid Class II White with midnight, ocean, or white — all with Carbon with midnight, ocean, matching cores daybreak or dawn tracers daybreak or dawn tracers and solid navy, khaki, a green and red ID daybreak or dawn tracers SPLICE/CLASS: and matching cores and white SPLICE/CLASS: and matching cores Double Braid Class II SPLICE/CLASS: Double Braid Class I SUNSET SPLICE/CLASS: MIDNIGHT Double Braid Class II OCEAN SPLICE/CLASS: Double Braid Class II Double Braid Class I

4,300 lb lb mm 3/8 3/8 3.8 9 in.

2680 1.5K 06/2019 1.5K 2680

3,500 lb lb mm 5/16 5/16 8 3.0 in. descriptions for more information. more for descriptions reserved. rights All Inc. Technologies, Rope Samson 2016/2019 © video and PDF formats PDF and video

5/8 5/8 150', 200', 250' 200', 150', 300' 250', 200', 150', 250' 200', in. 2,800 lb lb mm 9/32 9/32 2.3 7

relative properties of each of the components. See our product product our See components. the of each of properties relative in.

splice instructions, available in in available instructions, splice

2,200 lb lb mm 1/4 1/4 1.8 6 In some cases, Samson blends fibers to take advantage of the the of advantage take to fibers blends Samson cases, some In in. 1/2 1/2 100', 150', 200', 300' 200', 150', 100', 300' 250', 200', 150', 100', 200' 150', 100', in. in. SamsonRope.com

Visit SamsonRope.com for detailed detailed for SamsonRope.com Visit

1,200 lb lb mm 3/16 1.4 5

in.

creep fibers. creep 1-1/2 to 2 × Beam × 2 to 1-1/2 Stern Lines = = Lines Stern 360.384.0572 01 . Fax 3/8 3/8 100', 150' 100', 200' 150', 100', 200' 150', 100',

in.

1,000 lb lb mm 5/32 5/32 0.80 4 in.

must be protected from UV light. These are all exceptionally low- exceptionally all are These light. UV from protected be must

360.384.4669 360.384.4669 01

. Tel

on all anchor lines. anchor all on

FEET FEET FEET INCHES

3/4 × Length Over All Over Length × 3/4 Spring Lines = = Lines Spring

600 lb lb mm 1/8 1/8

0.50 3 in.

offer the highest strength of all the high-modulus fibers; however, it it however, fibers; high-modulus the all of strength highest the offer

Pro-Set Strong Super Gold-N-Braid Diameter

prespliced, with thimbles included included thimbles with prespliced,

Ferndale, WA 98248 USA 98248 WA Ferndale,

™ ™ ™

230

lb lb mm 5/64 0.20 2 in.

resistance; liquid crystal polymer (LCP) fibers; and PBO fibers, which which fibers, PBO and fibers; (LCP) polymer crystal liquid resistance;

1-1/2 × Beam × 1-1/2 Bow Lines = = Lines Bow

vessels. They are also professionally professionally also are They vessels. 2090 Thornton Street, Street, Thornton 2090 ANCHOR LINE LENGTHS LINE ANCHOR

POUNDS POUNDS MILLIMETER INCHES

get only from The Strongest Name in Rope. in Name Strongest The from only get strength, low stretch, and abrasion resistance with extreme heat heat extreme with resistance abrasion and stretch, low strength,

for some of the world’s largest largest world’s the of some for

Per 100 ft. 100 Per Average Diameter Diameter

we have the experience, integrity, and reliability you can can you reliability and integrity, experience, the have we

Other high-modulus fibers include aramid fibers that blend very high high very blend that fibers aramid include fibers high-modulus Other custom dock lines: dock custom Weight Strength Size Size

hawsers and lines mooring produce

CUSTOM DOCK LINES DOCK CUSTOM

calculating for Formulas SPECIFICATIONS Available in 500 ft. spools ft. 500 in Available to diverse industries. Known for excellence and quality, quality, and excellence for Known industries. diverse to

and quality control under which we we which under control quality and lines, and sheets. sheets. and lines,

recommended splicing technique. splicing recommended

36,000 36,000 lb

the legacy of our 140+ years’ experience providing rope rope providing experience years’ 140+ our of legacy the

for a smooth running, torque-free cord. cord. torque-free running, smooth a for

120 120 – 101

ft subjected to the same rigorous testing testing rigorous same the to subjected control halyards, in use for well-suited is it resistance, UV and

1

in. product specifications include rope construction, class and and class construction, rope include specifications product

flexibility, knotting, and strength characteristics characteristics strength and knotting, flexibility, EXPERIENCE

> When you sail with Samson, your boat carries carries boat your Samson, with sail you When

Our recreational marine products are are products marine recreational Our cut, abrasion, excellent and stretch, low very strength,

**3/4" dock lines are available in black and navy blue only. only. blue navy and black in available are lines dock **3/4"

the correct splice for the class of rope being used. The The used. being rope of class the for splice correct the 36,000 36,000

lb excellent has Samson’s Accessory Cord Cord Accessory

91–100 91–100 ft

other any than vessels more

used in a variety of applications. Extremely lightweight with ultra-high ultra-high with lightweight Extremely applications. of variety a in used

protection. chafe double and size one upgrade conditions storm *For

1

in.

need it, wherever you need it. need you wherever it, need core, nylon and cover polyester a With grip between the two groups. It is absolutely critical to use use to critical absolutely is It groups. two the between grip

moors that company the particularly well balanced set of characteristics that allow it to be be to it allow that characteristics of set balanced well particularly

Cord Accessory

480 Product Code: Code: Product

SERVICE

> World-class service and support, whenever you you whenever support, and service World-class

25,000 25,000 29,000 Class II ropes and reflect the differences in strengths and and strengths in differences the reflect and ropes II Class lb lb

76–90 76–90

903 Product Code: Product   ft

40' & 50' & 40' 61–75

ft

is a high-modulus polyethylene (HMPE) fiber with a a with fiber (HMPE) polyethylene high-modulus a is Dyneema from quality Consistent

1 1 7/8

in. in .

® Splicing techniques are different between Class I and and I Class between different are techniques Splicing

Samson Rope Technologies, Inc. Technologies, Rope Samson

3-strand rope up to 1-1/8". 1-1/8". to up rope 3-strand

LEAN manufacturing principles. principles. manufacturing LEAN

19,000 19,000 18,800 19,400

of the application for which they are designing. designing. are they which for application the of lb lb lb important? line my of class the knowing is Why

All Samson named products herein are trademarks of of trademarks are herein products named Samson All

61–75 61–75

ft

from 1/8" to 9/16", or double braid and and braid double or 9/16", to 1/8" from 10,900

5/8 5/8

7.8 16

lb lb mm in.

solution-dyed nylon to prevent bleed or fade. fade. or bleed prevent to nylon solution-dyed

   Ferndale, Washington are both ISO certified and utilize utilize and certified ISO both are Washington Ferndale,

7/8 7/8 3/4 3/4

in. in. in. 35' 51–60

ft

beyond its design. design. its beyond

requirements performance unique the with characteristics these

of Samson Rope Technologies, Inc. Technologies, Rope Samson of

techniques: Splicing

Fid may be used to splice hollow braided lines lines braided hollow splice to used be may Fid

7,500

9/16 9/16 14 6.0 lb lb mm

in.

colored dock lines are produced with with produced are lines dock colored

manufacturing plants, in Lafayette, Louisiana and and Louisiana Lafayette, in plants, manufacturing

trademarks registered are -Blue AmSteel and AmSteel

13,500 13,500 15,200 14,000

lb lb lb

set of characteristics. The challenge of the rope designer is to match match to is designer rope the of challenge The characteristics. of set

® ®

patented worldwide. Available in sets only, the Selma Selma the only, sets in Available worldwide. patented

51–60 51–60

ft furler so you do not stretch the sail sail the stretch not do you so furler

TRADEMARK NOTICES: TRADEMARK

6,700

1/2 1/2 4.7 12

lb lb mm

in.

for dock and anchor lines. All of Samson’s Samson’s of All lines. anchor and dock for

guarantee a quality product every time. Our Our time. every product quality a guarantee 3/4 3/4 5/8 5/8

in. in. in.

 

30' 41–50

There are several modern high-modulus fibers, each with a unique unique a with each fibers, high-modulus modern several are There

ft

Made from highly polished stainless steel, Selma Fids are are Fids Selma steel, stainless polished highly from Made

where the rope is cleated or winched. or cleated is rope the where

4,600 7/16 7/16 3.5 11

lb lb mm in.

or heavy seas, making nylon the perfect fiber fiber perfect the nylon making seas, heavy or

MANUFACTURING

> Samson’s standards of manufacturing manufacturing of standards Samson’s jib a on halyard blended-core a Use

10,000 10,000 8,600 7,900 lb lb lb

Fids Selma High-modulus fibers: Which one, for what, and why? and what, for one, Which fibers: High-modulus

polyethylene product. polyethylene

applications. The cover remains intact in areas on the rope rope the on areas in intact remains cover The applications.

41–50 41–50

ft

3,500

3/8 3/8

2.7 9 lb lb mm

in.

5/8 5/8 1/2 1/2

out the surge effects of wakes, waves, wind, wind, waves, wakes, of effects surge the out

in. in. in. ™

Dyneema high-performance DSM’s is

®   

braid in order to save additional weight aloft for halyard halyard for aloft weight additional save to order in braid

25' 36–40

ft

and make splicing easier. splicing make and

2,500

5/16 5/16

1.7 8 lb lb mm in. smooth help properties elongation elastic trademark of Royal DSM N.V. DSM Royal of trademark or high-modulus double braids. double high-modulus or

10,000 10,000 8,600 7,900 lb lb lb

36–40

Alternately, a sailor may opt to strip the cover from a double double a from cover the strip to opt may sailor a Alternately, ft

weight, reduce snagging, enhance abrasion resistance, resistance, abrasion enhance snagging, reduce weight,

registered a is Dyneema

5/8 5/8 1/2 1/2

in. in. in. ® 1,400 1/4 1.1 6 lb lb mm in.

excellent stretch and flexibility. Nylon’s Nylon’s flexibility. and stretch excellent high-performance, on covers for used widely is and applications

  

and coatings to improve the service life of ropes, reduce reduce ropes, of life service the improve to coatings and

20' 31–35

ft

100% premium nylon that provides provides that nylon premium 100%

POUNDS POUNDS MILLIMETER INCHES easier under all conditions. all under easier 6,300 6,300 4,900 4,900 4,500

Polyester is still regarded as an excellent fiber for many marine marine many for fiber excellent an as regarded still is Polyester lb lb lb

heat, abrasion, or cutting while in use. in while cutting or abrasion, heat,

31–35 31–35

ft

Per 100 ft. 100 Per Average Diameter Diameter the use of new synthetic fibers, unique constructions, constructions, unique fibers, synthetic new of use the

1/2 1/2 3/8 3/8

in. in. in.

with built are lines Samson All Yes.

lightweight, high-strength options, and watch your jib furl furl jib your watch and options, high-strength lightweight, became the standard against which all ropes were measured. measured. were ropes all which against standard the became

added to single braids to protect them from exposure to to exposure from them protect to braids single to added

Weight Strength Size Size

art by sailors around the world. Samson has pioneered pioneered has Samson world. the around sailors by art

 

15' 26–30

Is there really a difference? a really there Is ft

6,300 6,300 4,900 4,500 lb lb lb

low-stretch, Samson’s of any to halyards your Upgrade SPECIFICATIONS

on winches. Polyester ropes, particularly polyester double braids, braids, double polyester particularly ropes, Polyester winches. on

Available in 500 ft. spools ft. 500 in Available

12-strand line. Where necessary or desired, covers can be be can covers desired, or necessary Where line. 12-strand

26–30 26–30

ft

PRODUCTS PRODUCTS > Samson products are considered state of the the of state considered are products Samson

1/2 3/8 3/8

in. in. in.

and wet-strength loss. Because it has excellent grip, it works well well works it grip, excellent has it Because loss. wet-strength and

sailing applications, the most common single braid is a a is braid single common most the applications, sailing

degradation. degradation.

keeps the furler from spinning freely. spinning from furler the keeps

dock and anchor lines available. lines anchor and dock

3,600 3,600 4,900 4,900 4,500 lb lb lb

 

build ropes that were as strong as nylon, but with much less stretch stretch less much with but nylon, as strong as were that ropes build

10' 15–25

ft

sunlight to resistance superior provides and Samson manufactures a wide variety of single braids. For For braids. single of variety wide a manufactures Samson

15–25 15–25

and measuring. measuring. and

ft

that is stretching. This causes your jib to sag at the luff, and and luff, the at sag to jib your causes This stretching. is that

3/8 3/8 3/8

in. in. in.

by ensuring that you’ve got the best best the got you’ve that ensuring by

The Ultra Blue fiber has excellent dielectric properties properties dielectric excellent has fiber Blue Ultra The The introduction of polyester fiber allowed rope manufacturers to to manufacturers rope allowed fiber polyester of introduction The

Single braids are ropes designed without a separate core. core. separate a without designed ropes are braids Single reliable product specifications based on rigorous testing testing rigorous on based specifications product reliable

breeze picked up? Many times, this is due to an old halyard halyard old an to due is this times, Many up? picked breeze

and give yourself a little peace of mind mind of peace little a yourself give and lb 22,200 lb 13,500 lb 8,200 lb 4,900

It floats and has high wet and dry abrasion resistance. resistance. abrasion dry and wet high has and floats It FEET Size Pro-Set Strong Super Gold-N-Braid Size Boat

stand confidently behind our products with accurate, accurate, with products our behind confidently stand

™ ™ ™

it to absorb shock loads. loads. shock absorb to it

Have you ever had a difficult time furling your jib when the the when jib your furling time difficult a had ever you Have

LENGTH Boat

than underway. Protect your investment investment your Protect underway. than with high-strength Ultra Blue copolymer olefin fiber. fiber. olefin copolymer Blue Ultra high-strength with

mm) (18 mm) (16 mm) (12 mm) (9 member while the cover is typically made of Class I fibers. fibers. I Class of made typically is cover the while member

Strengths are approximate averages of new rope. new of averages approximate are Strengths Equally important to product innovation is our ability to to ability our is innovation product to important Equally

still used in dock and anchor lines where its excellent elasticity allows allows elasticity excellent its where lines anchor and dock in used still

LINE

is a fast-splicing single braid constructed constructed braid single fast-splicing a is Quik-Splice

3/4"** 5/8" 1/2" 3/8" us, our boats spend more time moored moored time more spend boats our us,

core is made from Class II fibers and serves as the strength strength the as serves and fibers II Class from made is core

GUIDE SELECTION LINE ANCHOR

Upgrade Your Halyards Halyards Your Upgrade

DOCK the development of lighter, stronger, more durable ropes. ropes. durable more stronger, lighter, of development the strong (much stronger than the natural fibers it replaced), nylon is is nylon replaced), it fibers natural the than stronger (much strong Quik-Splice 335 Product Code: Code: Product

It’s a fact of boating life that, for most of of most for that, life boating of fact a It’s

to a core-dependant double braid. In this construction, the the construction, this In braid. double core-dependant a to

dedicated to problem solving, and leads the industry in in industry the leads and solving, problem to dedicated

Nylon was the first synthetic fiber widely used in ropes. Reasonably Reasonably ropes. in used widely fiber synthetic first the was Nylon

the dock and anchor lines anchor and dock the

Strengths are approximate averages of new rope. new of averages approximate are Strengths

weight than traditional Class I fibers provide, you will look look will you provide, fibers I Class traditional than weight

TECH TIP: HALYARDS TIP: TECH

999-0070 Product Code: Product Synthetic fibers: What are the differences? the are What fibers: Synthetic application engineers, Samson’s R&D department is is department R&D Samson’s engineers, application

GUIDE SELECTION LINE DOCK

frequently used lines aboard are are aboard lines used frequently

For applications that require higher strength and lighter lighter and strength higher require that applications For

Contact your local Samson dealer for more information. information. more for dealer Samson local your Contact

7,400 lb lb mm 5/8 5/8 8.0 16 in. TECHNOLOGY > Staffed with dedicated scientists and and scientists dedicated with Staffed

(size range 1/4" through 1/2" diameter). 1/2" through 1/4" range (size

Whether power or sail, the most most the sail, or power Whether tote boxes. Longer lengths on spools are available. available. are spools on lengths Longer boxes. tote

for this application. this for

5,200 lb lb mm 1/2 1/2 4.5 12

in.

Comes with a pusher, and 5 aluminum tubular fids fids tubular aluminum 5 and pusher, a with Comes

CHECK YOUR LOCAL DEALER FOR COLOR AND SIZE AVAILABILITY. SIZE AND COLOR FOR DEALER LOCAL YOUR CHECK

generated heat. generated

diameters are shipped in convenient, reusable plastic plastic reusable convenient, in shipped are diameters

strength needs to be five times the working load, or 4,500 lbs. lbs. 4,500 or load, working the times five be to needs strength

3,200 lb lb mm 3/8 3/8 2.7 9 in. Samson Splicing Kit Splicing Samson

friction- from protection provide to and stoppers,

high-strength, reinforced captive thimble. Smaller Smaller thimble. captive reinforced high-strength, Dock & Anchor Lines Anchor & Dock

break rope’s the load, working 20% a in Factoring lbs. 900 SamsonRope.com Download it at at it Download

1,700 lb lb mm 1/4 1.4 6 in.

you can depend on, anytime, anyplace. anyplace. anytime, on, depend can you

WHITE WITH TRACERS WITH WHITE

Samson anchor lines are shipped with a prespliced prespliced a with shipped are lines anchor Samson

degradation, to provide grip on winches or in clutches and and clutches in or winches on grip provide to degradation,

at calculated be may system sheave four-purchase a through

Splice Instructions Instructions Splice >

POUNDS POUNDS MILLIMETER INCHES

schooner, look for Samson. It assures you of performance performance of you assures It Samson. for look schooner,

2019

cover serves to protect the core from abrasion or ultraviolet ultraviolet or abrasion from core the protect to serves cover

Per 100 ft. 100 Per Average Diameter Diameter

For example, the total load for an end-of-boom mainsheet going going mainsheet end-of-boom an for load total the example, For

of diameters and lengths. lengths. and diameters of

composite genoa or replacing the halyards on a traditional traditional a on halyards the replacing or genoa composite Internal and external abrasion inspection information inspection abrasion external and Internal >

Weight Strength Size Size SamsonRope.com

nylon. In addition to carrying up to one-half of the load, the the load, the of one-half to up carrying to addition In nylon.

GUIDE

SPECIFICATIONS SPECIFICATIONS Available in 600 ft. spools ft. 600 in Available the rated break strength. break rated the

end and available in a wide range range wide a in available and end So whether you’re looking for new sheets to trim your your trim to sheets new for looking you’re whether So

Inspection and retirement criteria retirement and Inspection >

site at at site web our on available are covers

more traditional synthetic fibers like polyester, olefin, and and olefin, polyester, like fibers synthetic traditional more

Pro-Set-3

GOLD/WHITE

of 20% is rope Samson any for load working standard The loads.

spliced with a secure eye in one one in eye secure a with spliced ID. red with yellow is core. floating and MFP Floatline MFP

™ Complete instructions for stripping stripping for instructions Complete

This type of construction is common to lines that use the the use that lines to common is construction of type This

For the iPhone and iPad this handy app features: features: app handy this iPad and iPhone the For

SELECTION LINE

Double braid with a multifilament polypropylene cover cover polypropylene multifilament a with braid Double peace of mind. mind. of peace halyards, or control lines, anticipated loads are considered working working considered are loads anticipated lines, control or halyards,

dock lines are pre- are lines dock HarborMaster

or through a rope clutch or stopper. stopper. or clutch rope a through or cover, each carrying an equal percentage of the total load. load. total the of percentage equal an carrying each cover,

Samson App Samson Floatline MFP

461 Product Code: Product

customers our provide experience and excellence, Halyard loads are best determined by your rigger. For sheets, sheets, For rigger. your by determined best are loads Halyard

wakes, waves, wind or heavy seas. seas. heavy or wind waves, wakes,

to be cleated, worked on a winch, winch, a on worked cleated, be to construction incorporates a braided core within a braided braided a within core braided a incorporates construction

all-inclusive package of technology, products, manufacturing manufacturing products, technology, of package all-inclusive

smooth out the surge effects of of effects surge the out smooth 3-STRAND

but consider the following: following: the consider but cover intact wherever the line needs needs line the wherever intact cover when nylon was still the king of synthetic fibers. This This fibers. synthetic of king the still was nylon when

NAVY BLUE NAVY

buy Samson, you are getting a lot more than a rope. Our Our rope. a than more lot a getting are you Samson, buy

Nylon's elastic elongation helps helps elongation elastic Nylon's

650 3/32 lb lb mm brochure, this of back the in available are loads sheet for Formulas 0.16 2.20

weight, but it is important to leave the the leave to important is it but weight, in . 1950s, late the in braid double the invented Samson

absorption, and long service life. service long and absorption,

program. So where’s the advantage for you? When you you When you? for advantage the where’s So program.

constructed of 100% nylon. nylon. 100% of constructed

Accurately assess your working load working your assess Accurately difference? the What’s 500

lb lb mm 1/16 0.12 1.75

dependent double braids to save save to braids double dependent in .

999-0010 Product Code: Product

Strong Super provide excellent strength, energy energy strength, excellent provide

marine, safety and rescue, arborist, utilities, even the space space the even utilities, arborist, rescue, and safety marine,

dock lines are are lines dock HarborMaster

like to strip the covers from core- from covers the strip to like

POUNDS POUNDS MILLIMETER INCHES

braids: single and braids Double

Samson anchor lines lines anchor Samson (Pro-Set-3), (Pro-Set-3),

double braided ropes. braided double

of our experience in industries as diverse as commercial commercial as diverse as industries in experience our of needs, the choice becomes clear. becomes choice the needs, Per 100 ft. 100 Per Average Diameter Diameter

how large or small. All Samson Samson All small. or large how

Many high-performance sailors sailors high-performance Many

BLACK

Weight Strength Size Size

of lengths two and 3-strand twisted constructions twisted 3-strand

running rigging you select for your boat carries the legacy legacy the carries boat your for select you rigging running

to suit your vessel, no matter matter no vessel, your suit to

SPECIFICATIONS SPECIFICATIONS Available in 180 ft. tubes and 600 ft. spools. ft. 600 and tubes ft. 180 in Available knowledge and an accurate assessment of your sailing sailing your of assessment accurate an and knowledge

as Class II. Class as

splice, eye braid double

or or or Super Strong), Strong), Super N-Braid

double braids double

to meet the most demanding applications in the world. The The world. the in applications demanding most the meet to

line of double-braided dock lines lines dock double-braided of line

Gold-N-Braid

180' easily dispensed from a plastic tube. tube. plastic a from dispensed easily 180'

part with any of the high-modulus fibers, are categorized categorized are fibers, high-modulus the of any with part

a for instructions pusher, ™

Available in double braid double in Available (Gold- The choice may seem intimidating. Armed with a little little a with Armed intimidating. seem may choice The

the way in developing high-performance cordage products products cordage high-performance developing in way the

Samson manufactures a complete complete a manufactures Samson

in comes water. absorb not does and Lash-It! Comes complete with a fid, fid, a with complete Comes

categorized as Class I. Those ropes, made in whole or in in or whole in made ropes, Those I. Class as categorized core-dependent from

boats are the same the are boats

all around you. For more than 140 years, Samson has led led has Samson years, 140 than more For you. around all

perform superbly under a particular set of circumstances. circumstances. of set particular a under superbly perform

weight ratio: it is stronger than steel, so light it floats, floats, it light so steel, than stronger is it ratio: weight Training Kit Training Splice Samson

traditional fibers of nylon, polyester, and olefin are are olefin and polyester, nylon, of fibers traditional

Choices—because not all all not Choices—because

Choices—because not all boats are the same the are boats all not Choices—because

Chances are you have seen Samson synthetic lines at work work at lines synthetic Samson seen have you are Chances offers a high strength-to- high a offers coating, urethane Lash-It!

Stripping covers covers Stripping

DOUBLE BRAIDS DOUBLE

based on fiber type. Ropes manufactured using the the using manufactured Ropes type. fiber on based designed for use as running rigging. Each is engineered to to engineered is Each rigging. running as use for designed

LINE FOR THE JOB THE FOR LINE A single braid made from HMPE fiber with Samthane Samthane with fiber HMPE from made braid single A People and technology make the difference difference the make technology and People

Samson ropes are classified into two main categories categories main two into classified are ropes Samson

sailboat. any on uses multiple its of because Samson offers a large variety of ropes specifically specifically ropes of variety large a offers Samson

ANCHOR LINES ANCHOR

SPLICING LINES DOCK

    

BEST THE CHOOSING

TECH TIP: STRIPPING COVERS STRIPPING TIP: TECH they? are What ropes: II Class and I Class

WHY SAMSON? WHY has been called “the sailor’s duct tape” tape” duct sailor’s “the called been has Lash-It!

So many different ropes —need a little help choosing? help little a —need ropes different many So

Lash-It! 811 811 Product Code: Product ™

™ So many different ropes —need a little help choosing? Lash-It! Product Code: 811 CHOOSING THE BEST  DOCK LINES  SPLICING ANCHOR LINES TECH TIP:Lash-It! hasSTRIPPING been called “the sailor’s COVERSduct tape” Class I and Class II ropes: What are they? WHY SAMSON? Samson offers a large variety of ropes specifically because of its multiple uses on any sailboat. Samson ropes are classified into two main categories People and technology make the difference LINE FOR THE JOB designed for use as running rigging. Each is engineered to A single braid made from HMPE fiber with Samthane based on fiber type. Ropes manufactured using the Choices—because not all boats are the same Choices—because not all DOUBLE BRAIDS urethane coating,Stripping Lash-It! offers covers a high strength-to- Chances are you have seen Samson synthetic lines at work Samson Splice Training Kit weight ratio: it is stronger than steel, so light it floats, traditional fibers of nylon, polyester, and olefin are perform superbly under a particular set of circumstances. all around you. For more than 140 years, Samson has led Comesboats complete are the with same a fid, and does fromnot absorb core-dependentwater. Lash-It! comes in categorized as Class I. Those ropes, made in whole or in The choice may seem intimidating. Armed with a little Samson manufactures a complete Available in double braid (Gold- the way in developing high-performance cordage products pusher, instructions for a ™ part with any of the high-modulus fibers, are categorized line of double-braided dock lines Gold-N-Braid 180' easily dispensed from a plastic tube. to meet the most demanding applications in the world. The doubleN-Braid braid or eye Super splice, Strong), or double braids as Class II. knowledge and an accurate assessment of your sailing to suit your vessel, no matter SPECIFICATIONS Available in 180 ft. tubes and 600 ft. spools. running rigging you select for your boat carries the legacy BLACK and3-strand two lengths twisted of constructions Size Many high-performanceSize Strength sailorsWeight needs, the choice becomes clear. how large or small. All Samson double(Pro-Set-3), braided ropes.Samson anchor lines Diameter Diameter Average Per 100 ft. of our experience in industries as diverse as commercial HarborMaster™ dock lines are INCHES like toMILLIMETER strip the coversPOUNDS from core-POUNDS Double braids and single braids: provide excellent strength, energy ™ marine, safety and rescue, arborist, utilities, even the space Accurately assess your working load Product Code: 999-0010 Super Strong 1/16 in. dependent1.75 mm double500 braidslb to 0.12savelb What’s the difference? constructed of 100% nylon. absorption, and long service life. program. So where’s the advantage for you? When you Formulas for sheet loads are available in the back of this brochure, 3/32 in. weight,2.20 butmm it is important650 lb to 0.16leavelb the Samson invented the double braid in the late 1950s, Nylon's elastic elongation helps NAVY BLUE buy Samson, you are getting a lot more than a rope. Our but consider the following: smooth out the surge effects of 3-STRAND cover intact wherever the line needs when nylon was still the king of synthetic fibers. This all-inclusive package of technology, products, manufacturing Halyard loads are best determined by your rigger. For sheets, wakes, waves, wind or heavy seas. to be cleated,™ worked on a winch, construction incorporates a braided core within a braided excellence, and experience provide our customers MFP Floatlineor through a Productrope clutch Code: 461 or stopper. cover, each carrying an equal percentage of the total load. Samson App halyards, or control lines, anticipated loads are considered working HarborMaster dock lines are pre- Double braid with a multifilament polypropylene cover peace of mind. Complete instructions for stripping This type of construction is common to lines that use the For the iPhone and iPad this handy app features: LINE SELECTION loads. The standard working load for any Samson rope is 20% of spliced with a secure eye in one GOLD/WHITE ™ and floating core. MFP Floatline is yellow with red ID. Pro-Set-3 covers are available on our web site at more traditional synthetic fibers like polyester, olefin, and the rated break strength. end and available in a wide range SPECIFICATIONS Available in 600 ft. spools So whether you’re looking for new sheets to trim your > Inspection and retirement criteria SamsonRope.com nylon. In addition to carrying up to one-half of the load, the GUIDE For example, the total load for an end-of-boom mainsheet going of diameters and lengths. Size Size Strength Weight composite genoa or replacing the halyards on a traditional > Internal and external abrasion inspection information Diameter Diameter Average Per 100 ft. cover serves to protect the core from abrasion or ultraviolet 2019 through a four-purchase sheave system may be calculated at INCHES MILLIMETER POUNDS POUNDS schooner, look for Samson. It assures you of performance > Splice Instructions Samson anchor lines are shipped with a prespliced degradation, to provide grip on winches or in clutches and WHITE WITH TRACERS 1/4 in. 6 mm 1,700 lb 1.4 lb you can depend on, anytime, anyplace. Download it at 900 lbs. Factoring in a 20% working load, the rope’s break Dock & Anchor Lines high-strength, reinforced captive thimble. Smaller stoppers, and to provide protection from friction- SamsonRope.com Samson Splicing Kit 3/8 in. 9 2.7 strength needs to be five times the working load, or 4,500 lbs. diameters are shipped in convenient, reusable plastic mm 3,200 lb lb CHECK YOUR LOCAL DEALER FOR COLOR AND SIZE AVAILABILITY. Comes with a pusher, and 5 aluminum tubular fids generated heat. for this application. tote boxes. Longer lengths on spools are available. 1/2 in. 12 mm 5,200 lb 4.5 lb Whether power or sail, the most (size range 1/4" through 1/2" diameter). frequently used lines aboard are Contact your local Samson dealer for more information. 5/8 in. 16 mm 7,400 lb 8.0 lb For applications that require higher strength and lighter > TECHNOLOGY Staffed with dedicated scientists and Synthetic fibers: What are the differences? DOCK LINE SELECTION GUIDE Product Code: 999-0070 application engineers, Samson’s R&D department is TECH TIP: HALYARDS weight than traditional Class I fibers provide, you will look Nylon was the first synthetic fiber widely used in ropes. Reasonably the dock and anchor lines Strengths are approximate averages of new rope. dedicated to problem solving, and leads the industry in It’s a fact of boating life that, for most of ™ to a core-dependant double braid. In this construction, the strong (much stronger than the natural fibers it replaced), nylon is DOCK UpgradeQuik-Splice Your Halyards Product Code: 335 the development of lighter, stronger, more durable ropes. us, our boats spend more time moored 3/8" 1/2" 5/8" 3/4"** ANCHOR LINE SELECTION GUIDE Quik-Splice is a fast-splicing single braid constructed core is made from Class II fibers and serves as the strength still used in dock and anchor lines where its excellent elasticity allows LINE Strengths are approximate averages of new rope. Equally important to product innovation is our ability to than underway. Protect your investment Boat LENGTH (9 mm) (12 mm) (16 mm) (18 mm) Have you everwith had high-strength a difficult Ultratime Bluefurling copolymer your jib olefin when fiber. the member while the cover is typically made of Class I fibers. it to absorb shock loads. ™ ™ ™ stand confidently behind our products with accurate, and give yourself a little peace of mind Size FEET 4,900 lb 8,200 lb 13,500 lb 22,200 lb Boat Size Gold-N-Braid Super Strong Pro-Set breeze pickedIt up?floats Many and hastimes, high thiswet isand due dry toabrasion an old resistance. halyard The introduction of polyester fiber allowed rope manufacturers to The Ultra Blue fiber has excellent dielectric properties Single braids are ropes designed without a separate core. reliable product specifications based on rigorous testing by ensuring that you’ve got the best 3/8 in. 3/8 in. 3/8 in. that is stretching. This causes your jib to sag at the luff, and build ropes that were as strong as nylon, but with much less stretch 15–25 ft 10' 15–25 ft and provides superior resistance to sunlight Samson manufactures a wide variety of single braids. For and measuring. dock and anchor lines available.   4,500 lb 4,900 lb 3,600 lb keeps the furler from spinning freely. and wet-strength loss. Because it has excellent grip, it works well degradation. sailing applications, the most common single braid is a 3/8 in. 3/8 in. 1/2 in. > PRODUCTS Samson products are considered state of the 26–30 ft 12-strand line. Where necessary or desired, covers can be on winches. Polyester ropes, particularly polyester double braids, Is there really a difference? 26–30 ft 15'   4,500 lb 4,900 lb 6,300 lb Upgrade yourSPECIFICATIONS halyards to any Available of Samson’s in 500 ft. spools low-stretch, art by sailors around the world. Samson has pioneered Size Size Strength Weight added to single braids to protect them from exposure to became the standard against which all ropes were measured. Yes. All Samson lines are built with 3/8 in. 3/8 in. 1/2 in. lightweight, high-strength options, and watch your jib furl 31–35 ft Diameter Diameter Average Per 100 ft. the use of new synthetic fibers, unique constructions, Polyester is still regarded as an excellent fiber for many marine 4,500 lb 4,900 lb 6,300 lb easier under all conditions. heat, abrasion, or cutting while in use. 100% premium nylon that provides 31–35 ft 20'    INCHES MILLIMETER POUNDS POUNDS and coatings to improve the service life of ropes, reduce applications and is widely used for covers on high-performance, excellent stretch and flexibility. Nylon’s 1/2 in. 1/2 in. 5/8 in. 1/4 in. 6 mm 1,400 lb 1.1 lb ® 36–40 ft Alternately, a sailor may opt to strip the cover from a double weight, reduce snagging, enhance abrasion resistance, Dyneema is a registered or high-modulus double braids. elastic elongation properties help smooth 7,900 lb 8,600 lb 10,000 lb 5/16 in. 8 mm 2,500 lb 1.7 lb trademark of Royal DSM N.V. ft and make splicing easier. 36–40 25'    braid in order to save additional weight aloft for halyard ® out the surge effects of wakes, waves, wind, ™1/2 in. 1/2 in. 5/8 in. 3/8 in. 9 mm lb 2.7 lb Dyneema is DSM’s high-performance 41–50 ft 3,500 High-modulus fibers: Which one, for what, and why? Selma Fids7,900 lb 8,600 lb 10,000 lb applications. The cover remains intact in areas on the rope polyethylene product. or heavy seas, making nylon the perfect fiber Use7/16 in.a blended-core11 mm halyard4,600 lb on a3.5 jiblb > MANUFACTURING Samson’s standards of manufacturing There are several modern high-modulus fibers, each with a unique ft Made from highly polished stainless steel, Selma Fids are where the rope is cleated or winched. for dock and anchor lines. All of Samson’s 41–50 30'   5/8 in. 5/8 in. 3/4 in. guarantee a quality product every time. Our 51–60 ft patented worldwide. Available in sets only, the Selma 1/2furler in. so you12 mm do not6,700 stretchlb the4.7 saillb TRADEMARK NOTICES: set of characteristics. The challenge of the rope designer is to match 14,000 lb 15,200 lb 13,500 lb manufacturing plants, in Lafayette, Louisiana and AmSteel® and AmSteel®-Blue are registered trademarks colored dock lines are produced with Fid may be used to splice hollow braided lines 9/16 in. 14 mm 7,500 lb 6.0 lb Splicing techniques: these characteristics with the unique performance requirements 51–60 ft 35' 3/4 in. 3/4 in. 7/8 in. beyond its design. of Samson Rope Technologies, Inc. solution-dyed nylon to prevent bleed or fade.    61–75 ft from 1/8" to 9/16", or double braid and 5/8 in. 16 mm 10,900 lb 7.8 lb Ferndale, Washington are both ISO certified and utilize of the application for which they are designing. 19,400 lb 18,800 lb 19,000 lb Why is knowing the class of my line important? All Samson named products herein are trademarks of 3-strand rope up to 1-1/8". LEAN manufacturing principles. Samson Rope Technologies, Inc. ® 7/8 in. 1 in. Splicing techniques are different between Class I and Dyneema is a high-modulus polyethylene (HMPE) fiber with a Consistent quality from 61–75 ft 40' & 50'   76–90 ft Product Code: 903 ™ particularly well balanced set of characteristics that allow it to be the company that moors 29,000 lb 25,000 lb Accessory Cord Product Code: 480 Class II ropes and reflect the differences in strengths and > SERVICE World-class service and support, whenever you *For storm conditions upgrade one size and double chafe protection. 1 in. With a polyester cover and nylon core, grip between the two groups. It is absolutely critical to use need it, wherever you need it. used in a variety of applications. Extremely lightweight with ultra-high more vessels than any other 91–100 ft **3/4" dock lines are available in black and navy blue only. 36,000 lb Samson’s Accessory Cord has excellent the correct splice for the class of rope being used. The strength, very low stretch, and excellent abrasion, cut, Our recreational marine products are > EXPERIENCE When you sail with Samson, your boat carries 1 in. flexibility, knotting, and strength characteristics product specifications include rope construction, class and and UV resistance, it is well-suited for use in halyards, control subjected to the same rigorous testing 101–120 ft 36,000 lb for a smooth running, torque-free cord. the legacy of our 140+ years’ experience providing rope lines, and sheets. and quality control under which we recommended splicing technique. CUSTOM DOCK LINES Formulas for calculating SPECIFICATIONS Available in 500 ft. spools to diverse industries. Known for excellence and quality, Other high-modulus fibers include aramid fibers that blend very high produce mooring lines and hawsers custom dock lines: Size Size Strength Weight we have the experience, integrity, and reliability you can for some of the world’s largest Diameter Diameter Average Per 100 ft. strength, low stretch, and abrasion resistance with extreme heat INCHES MILLIMETER POUNDS POUNDS get only from The Strongest Name in Rope. vessels. They are also professionally Bow Lines = 1-1/2 × Beam ANCHOR LINE LENGTHS 2090 Thornton Street, resistance; liquid crystal polymer (LCP) fibers; and PBO fibers, which 5/64 in. 2 mm 230 lb 0.20 lb prespliced, with thimbles included Diameter Gold-N-Braid™ Super Strong™ Pro-Set™ Ferndale, WA 98248 USA offer the highest strength of all the high-modulus fibers; however, it Spring Lines = 1/8 in. 3 mm 600 lb 0.50 lb on all anchor lines. 3/4 × Length Over All INCHES FEET FEET FEET Tel 01.360.384.4669 must be protected from UV light. These are all exceptionally low- 5/32 in. 4 mm 1,000 lb 0.80 lb creep fibers. Stern Lines = 1-1/2 to 2 × Beam 3/8 in. 100', 150', 200' 100', 150', 200' 100', 150' Fax 01.360.384.0572 Visit SamsonRope.com for detailed 3/16 in. 5 mm 1,200 lb 1.4 lb SamsonRope.com In some cases, Samson blends fibers to take advantage of the 1/2 in. 100', 150', splice200' 100', instructions, 150', 200', 250', 300' available100', 150', 200', in 300' 1/4 in. 6 mm 2,200 lb 1.8 lb relative properties of each of the components. See our product 5/8 in. 200', 250' 150', 200', 250', 300' 150', 200', 250' 9/32 in. 7 mm 2,800 lb 2.3 lb descriptions for more information. video and PDF formats 5/16 in. 8 mm 3,500 lb 3.0 lb © 2016/2019 Samson Rope Technologies, Inc. All rights reserved. 2680 1.5K 06/2019 3/8 in. 9 mm 4,300 lb 3.8 lb

4,300 lb lb mm 3/8 3/8 3.8 9 in.

3,500 lb lb mm 5/16 5/16 8 3.0

in. descriptions for more information. more for descriptions

video and PDF formats PDF and video

2680 1.5K 06/2019 1.5K 2680

reserved. rights All Inc. Technologies, Rope Samson 2016/2019 © 2,800 mm lb lb 9/32 9/32 2.3 7

relative properties of each of the components. See our product product our See components. the of each of properties relative in.

splice instructions, available in in available instructions, splice

5/8 5/8 150', 200', 250' 200', 150', 300' 250', 200', 150', 250' 200', in.

2,200 lb lb mm 1/4 1/4 1.8 6 In some cases, Samson blends fibers to take advantage of the the of advantage take to fibers blends Samson cases, some In in.

Visit SamsonRope.com for detailed detailed for SamsonRope.com Visit 1/2 1/2 100', 150', 200', 300' 200', 150', 100', 300' 250', 200', 150', 100', 200' 150', 100', in. in. 1,200 lb lb mm 3/16 1.4 5

in. SamsonRope.com

creep fibers. creep 1-1/2 to 2 × Beam × 2 to 1-1/2 Stern Lines = = Lines Stern

1,000

lb lb mm 5/32 5/32 0.80 4

in. 360.384.0572 01 . Fax 3/8 3/8 100', 150' 100', 200' 150', 100', 200' 150', 100', in. must be protected from UV light. These are all exceptionally low- exceptionally all are These light. UV from protected be must

on all anchor lines. anchor all on

3/4 × Length Over All Over Length × 3/4 Spring Lines = = Lines Spring

600 lb lb mm 1/8 1/8 3 0.50 in.

360.384.4669 360.384.4669 01

. Tel offer the highest strength of all the high-modulus fibers; however, it it however, fibers; high-modulus the all of strength highest the offer

prespliced, with thimbles included included thimbles with prespliced,

FEET FEET FEET INCHES

230 mm lb lb 5/64 0.20 2

in.

Pro-Set Strong Super Gold-N-Braid Diameter

resistance; liquid crystal polymer (LCP) fibers; and PBO fibers, which which fibers, PBO and fibers; (LCP) polymer crystal liquid resistance;

Ferndale, WA 98248 USA 98248 WA Ferndale,

1-1/2 × Beam × 1-1/2 Bow Lines = = Lines Bow

vessels. They are also professionally professionally also are They vessels. ™ ™ ™

POUNDS POUNDS MILLIMETER INCHES

strength, low stretch, and abrasion resistance with extreme heat heat extreme with resistance abrasion and stretch, low strength,

2090 Thornton Street, Street, Thornton 2090 ANCHOR LINE LENGTHS LINE ANCHOR

for some of the world’s largest largest world’s the of some for

Per 100 ft. 100 Per Average Diameter Diameter

get only from The Strongest Name in Rope. in Name Strongest The from only get

Other high-modulus fibers include aramid fibers that blend very high high very blend that fibers aramid include fibers high-modulus Other custom dock lines: dock custom Weight Strength Size Size

hawsers and lines mooring produce

CUSTOM DOCK LINES DOCK CUSTOM

calculating for Formulas we have the experience, integrity, and reliability you can can you reliability and integrity, experience, the have we SPECIFICATIONS Available in 500 ft. spools ft. 500 in Available

and quality control under which we we which under control quality and lines, and sheets. sheets. and lines,

to diverse industries. Known for excellence and quality, quality, and excellence for Known industries. diverse to

for a smooth running, torque-free cord. cord. torque-free running, smooth a for

subjected to the same rigorous testing testing rigorous same the to subjected control halyards, in use for well-suited is it resistance, UV and

recommended splicing technique. splicing recommended

36,000 36,000 lb

the legacy of our 140+ years’ experience providing rope rope providing experience years’ 140+ our of legacy the

flexibility, knotting, and strength characteristics characteristics strength and knotting, flexibility,

120 120 – 101 ft

Our recreational marine products are are products marine recreational Our cut, abrasion, excellent and stretch, low very strength, 1

in.

product specifications include rope construction, class and and class construction, rope include specifications product

**3/4" dock lines are available in black and navy blue only. only. blue navy and black in available are lines dock **3/4"

EXPERIENCE excellent has Samson’s > When you sail with Samson, your boat carries carries boat your Samson, with sail you When Accessory Cord Cord Accessory

other any than vessels more

used in a variety of applications. Extremely lightweight with ultra-high ultra-high with lightweight Extremely applications. of variety a in used

protection. chafe double and size one upgrade conditions storm *For

the correct splice for the class of rope being used. The The used. being rope of class the for splice correct the

36,000 36,000 lb

core, nylon and cover polyester a With

91–100 91–100 ft

1 moors that company the

particularly well balanced set of characteristics that allow it to be be to it allow that characteristics of set balanced well particularly in. Cord Accessory need it, wherever you need it. need you wherever it, need grip between the two groups. It is absolutely critical to use use to critical absolutely is It groups. two the between grip 480 Product Code: Code: Product

903 Product Code: Product  

40' & 50' & 40' 61–75

ft

is a high-modulus polyethylene (HMPE) fiber with a a with fiber (HMPE) polyethylene high-modulus a is Dyneema

from quality Consistent

SERVICE > World-class service and support, whenever you you whenever support, and service World-class

25,000 25,000 29,000 Class II ropes and reflect the differences in strengths and and strengths in differences the reflect and ropes II Class lb lb

®

76–90 76–90

ft

3-strand rope up to 1-1/8". 1-1/8". to up rope 3-strand

1 1 7/8

in. in .

Splicing techniques are different between Class I and and I Class between different are techniques Splicing

of the application for which they are designing. designing. are they which for application the of

Samson Rope Technologies, Inc. Technologies, Rope Samson

LEAN manufacturing principles. principles. manufacturing LEAN from 1/8" to 9/16", or double braid and and braid double or 9/16", to 1/8" from 10,900

5/8 5/8

7.8 16

lb lb mm in.

solution-dyed nylon to prevent bleed or fade. fade. or bleed prevent to nylon solution-dyed

  

19,000 19,000 18,800 19,400 lb lb lb 35' 51–60 important? line my of class the knowing is Why

ft

requirements performance unique the with characteristics these

of trademarks are herein products named Samson All

61–75 61–75

ft

Fid may be used to splice hollow braided lines lines braided hollow splice to used be may Fid

Ferndale, Washington are both ISO certified and utilize utilize and certified ISO both are Washington Ferndale,

7,500 9/16 9/16 14 6.0

lb lb mm 3/4 7/8 7/8 3/4

in.

in. in. in.

colored dock lines are produced with with produced are lines dock colored

beyond its design. design. its beyond of Samson Rope Technologies, Inc. Technologies, Rope Samson of

techniques: Splicing

set of characteristics. The challenge of the rope designer is to match match to is designer rope the of challenge The characteristics. of set

patented worldwide. Available in sets only, the Selma Selma the only, sets in Available worldwide. patented

manufacturing plants, in Lafayette, Louisiana and and Louisiana Lafayette, in plants, manufacturing

6,700 1/2 1/2 4.7 12 lb lb mm

in. trademarks registered are -Blue AmSteel and AmSteel

for dock and anchor lines. All of Samson’s Samson’s of All lines. anchor and dock for

13,500 13,500 15,200 14,000

lb lb lb

 

® ®

30' 41–50

There are several modern high-modulus fibers, each with a unique unique a with each fibers, high-modulus modern several are There

ft

51–60 51–60

ft furler so you do not stretch the sail sail the stretch not do you so furler Made from highly polished stainless steel, Selma Fids are are Fids Selma steel, stainless polished highly from Made

TRADEMARK NOTICES: TRADEMARK

guarantee a quality product every time. Our Our time. every product quality a guarantee 3/4 3/4 5/8 5/8

in. in. in. 4,600 7/16 7/16 3.5 11

lb lb mm in. or heavy seas, making nylon the perfect fiber fiber perfect the nylon making seas, heavy or

where the rope is cleated or winched. or cleated is rope the where Fids Selma High-modulus fibers: Which one, for what, and why? and what, for one, Which fibers: High-modulus

MANUFACTURING

> Samson’s standards of manufacturing manufacturing of standards Samson’s jib a on halyard blended-core a Use

3,500

3/8 3/8 2.7 9 lb lb mm

in. 10,000 10,000 8,600 7,900

out the surge effects of wakes, waves, wind, wind, waves, wakes, of effects surge the out

lb lb lb ™

polyethylene product. polyethylene

applications. The cover remains intact in areas on the rope rope the on areas in intact remains cover The applications.

41–50 41–50

ft

  

25' 36–40

ft

1/2 5/8 5/8 1/2

in. in. in.

Dyneema high-performance DSM’s is 2,500 5/16 5/16 1.7 8

lb lb mm in. smooth help properties elongation elastic

or high-modulus double braids. double high-modulus or ®

braid in order to save additional weight aloft for halyard halyard for aloft weight additional save to order in braid

and make splicing easier. splicing make and

trademark of Royal DSM N.V. DSM Royal of trademark

10,000 10,000 8,600 7,900 lb lb lb 1,400 1/4 1.1 6 lb lb mm

in. excellent stretch and flexibility. Nylon’s Nylon’s flexibility. and stretch excellent

high-performance, on covers for used widely is and applications

36–40

Alternately, a sailor may opt to strip the cover from a double double a from cover the strip to opt may sailor a Alternately, ft

weight, reduce snagging, enhance abrasion resistance, resistance, abrasion enhance snagging, reduce weight,

registered a is Dyneema

  

5/8 5/8 1/2 1/2

in. in. in. ® 20' 31–35

ft

100% premium nylon that provides provides that nylon premium 100%

POUNDS POUNDS MILLIMETER INCHES Polyester is still regarded as an excellent fiber for many marine marine many for fiber excellent an as regarded still is Polyester

and coatings to improve the service life of ropes, reduce reduce ropes, of life service the improve to coatings and

Per 100 ft. 100 Per Average Diameter Diameter

easier under all conditions. all under easier 6,300 6,300 4,900 4,900 4,500 lb lb lb

with built are lines Samson All Yes.

heat, abrasion, or cutting while in use. in while cutting or abrasion, heat,

became the standard against which all ropes were measured. measured. were ropes all which against standard the became

31–35 31–35

ft

Weight Strength Size Size

the use of new synthetic fibers, unique constructions, constructions, unique fibers, synthetic new of use the

1/2 1/2 3/8 3/8

in. in. in.

 

lightweight, high-strength options, and watch your jib furl furl jib your watch and options, high-strength lightweight,

15' 26–30

Is there really a difference? a really there Is ft added to single braids to protect them from exposure to to exposure from them protect to braids single to added

SPECIFICATIONS on winches. Polyester ropes, particularly polyester double braids, braids, double polyester particularly ropes, Polyester winches. on Available in 500 ft. spools ft. 500 in Available

art by sailors around the world. Samson has pioneered pioneered has Samson world. the around sailors by art

6,300 6,300 4,900 4,500 lb lb lb

low-stretch, Samson’s of any to halyards your Upgrade

12-strand line. Where necessary or desired, covers can be be can covers desired, or necessary Where line. 12-strand

and wet-strength loss. Because it has excellent grip, it works well well works it grip, excellent has it Because loss. wet-strength and

26–30 26–30

ft

degradation. degradation.

PRODUCTS PRODUCTS

> Samson products are considered state of the the of state considered are products Samson

1/2 3/8 3/8

in. in. in.

dock and anchor lines available. lines anchor and dock

  sailing applications, the most common single braid is a a is braid single common most the applications, sailing build ropes that were as strong as nylon, but with much less stretch stretch less much with but nylon, as strong as were that ropes build 10' 15–25

ft

sunlight to resistance superior provides and

keeps the furler from spinning freely. spinning from furler the keeps

3,600 3,600 4,900 4,900 4,500 lb lb lb

by ensuring that you’ve got the best best the got you’ve that ensuring by

Samson manufactures a wide variety of single braids. For For braids. single of variety wide a manufactures Samson

The Ultra Blue fiber has excellent dielectric properties properties dielectric excellent has fiber Blue Ultra The 15–25 15–25 and measuring. measuring. and The introduction of polyester fiber allowed rope manufacturers to to manufacturers rope allowed fiber polyester of introduction The ft

that is stretching. This causes your jib to sag at the luff, and and luff, the at sag to jib your causes This stretching. is that

3/8 3/8 3/8

in. in. in.

and give yourself a little peace of mind mind of peace little a yourself give and lb 22,200 lb 13,500 lb 8,200 lb 4,900 It floats and has high wet and dry abrasion resistance. resistance. abrasion dry and wet high has and floats It Size FEET

Single braids are ropes designed without a separate core. core. separate a without designed ropes are braids Single reliable product specifications based on rigorous testing testing rigorous on based specifications product reliable

it to absorb shock loads. loads. shock absorb to it breeze picked up? Many times, this is due to an old halyard halyard old an to due is this times, Many up? picked breeze

Boat LENGTH Pro-Set Strong Super Gold-N-Braid Size Boat

than underway. Protect your investment investment your Protect underway. than with high-strength Ultra Blue copolymer olefin fiber. fiber. olefin copolymer Blue Ultra high-strength with

mm) (18 mm) (16 mm) (12 mm) (9

stand confidently behind our products with accurate, accurate, with products our behind confidently stand

™ ™ ™

still used in dock and anchor lines where its excellent elasticity allows allows elasticity excellent its where lines anchor and dock in used still Have you ever had a difficult time furling your jib when the the when jib your furling time difficult a had ever you Have

LINE

is a fast-splicing single braid constructed constructed braid single fast-splicing a is Quik-Splice

member while the cover is typically made of Class I fibers. fibers. I Class of made typically is cover the while member

3/4"** 5/8" 1/2" 3/8" us, our boats spend more time moored moored time more spend boats our us,

Strengths are approximate averages of new rope. new of averages approximate are Strengths

Equally important to product innovation is our ability to to ability our is innovation product to important Equally

DOCK

strong (much stronger than the natural fibers it replaced), nylon is is nylon replaced), it fibers natural the than stronger (much strong Quik-Splice

335 Product Code: Code: Product

core is made from Class II fibers and serves as the strength strength the as serves and fibers II Class from made is core It’s a fact of boating life that, for most of of most for that, life boating of fact a It’s GUIDE SELECTION LINE ANCHOR

Upgrade Your Halyards Halyards Your Upgrade the development of lighter, stronger, more durable ropes. ropes. durable more stronger, lighter, of development the ™

Nylon was the first synthetic fiber widely used in ropes. Reasonably Reasonably ropes. in used widely fiber synthetic first the was Nylon

the dock and anchor lines anchor and dock the to a core-dependant double braid. In this construction, the the construction, this In braid. double core-dependant a to

Strengths are approximate averages of new rope. new of averages approximate are Strengths

dedicated to problem solving, and leads the industry in in industry the leads and solving, problem to dedicated

999-0070 Product Code: Product

Synthetic fibers: What are the differences? the are What fibers: Synthetic

GUIDE SELECTION LINE DOCK

weight than traditional Class I fibers provide, you will look look will you provide, fibers I Class traditional than weight

frequently used lines aboard are are aboard lines used frequently

TECH TIP: HALYARDS TIP: TECH

application engineers, Samson’s R&D department is is department R&D Samson’s engineers, application

7,400 lb lb mm 5/8 5/8

8.0 16 in.

(size range 1/4" through 1/2" diameter). 1/2" through 1/4" range (size

For applications that require higher strength and lighter lighter and strength higher require that applications For

Contact your local Samson dealer for more information. information. more for dealer Samson local your Contact Whether power or sail, the most most the sail, or power Whether

for this application. this for TECHNOLOGY > Staffed with dedicated scientists and and scientists dedicated with Staffed

5,200 lb lb mm 1/2 1/2 4.5 12 in.

Comes with a pusher, and 5 aluminum tubular fids fids tubular aluminum 5 and pusher, a with Comes

CHECK YOUR LOCAL DEALER FOR COLOR AND SIZE AVAILABILITY. SIZE AND COLOR FOR DEALER LOCAL YOUR CHECK

tote boxes. Longer lengths on spools are available. available. are spools on lengths Longer boxes. tote

strength needs to be five times the working load, or 4,500 lbs. lbs. 4,500 or load, working the times five be to needs strength

3,200

lb lb mm 3/8 3/8 2.7 9 in. Samson Splicing Kit Splicing Samson

generated heat. generated

diameters are shipped in convenient, reusable plastic plastic reusable convenient, in shipped are diameters Dock & Anchor Lines Anchor & Dock

900 lbs. Factoring in a 20% working load, the rope’s break break rope’s the load, working 20% a in Factoring lbs. 900

1,700 lb lb mm 1/4 1.4 6 in.

WHITE WITH TRACERS WITH WHITE stoppers, and to provide protection from friction- from protection provide to and stoppers,

high-strength, reinforced captive thimble. Smaller Smaller thimble. captive reinforced high-strength,

SamsonRope.com Download it at at it Download

through a four-purchase sheave system may be calculated at at calculated be may system sheave four-purchase a through

you can depend on, anytime, anyplace. anyplace. anytime, on, depend can you

POUNDS POUNDS MILLIMETER INCHES Samson anchor lines are shipped with a prespliced prespliced a with shipped are lines anchor Samson

degradation, to provide grip on winches or in clutches and and clutches in or winches on grip provide to degradation,

Per 100 ft. 100 Per Average Diameter Diameter

Splice Instructions Instructions Splice >

For example, the total load for an end-of-boom mainsheet going going mainsheet end-of-boom an for load total the example, For

schooner, look for Samson. It assures you of performance performance of you assures It Samson. for look schooner,

2019 of diameters and lengths. lengths. and diameters of

cover serves to protect the core from abrasion or ultraviolet ultraviolet or abrasion from core the protect to serves cover

Weight Strength Size Size

composite genoa or replacing the halyards on a traditional traditional a on halyards the replacing or genoa composite Internal and external abrasion inspection information inspection abrasion external and Internal > SPECIFICATIONS SPECIFICATIONS

Available in 600 ft. spools ft. 600 in Available the rated break strength. break rated the end and available in a wide range range wide a in available and end

SamsonRope.com nylon. In addition to carrying up to one-half of the load, the the load, the of one-half to up carrying to addition In nylon.

GUIDE

So whether you’re looking for new sheets to trim your your trim to sheets new for looking you’re whether So

Inspection and retirement criteria retirement and Inspection > GOLD/WHITE

loads. The standard working load for any Samson rope is 20% of of 20% is rope Samson any for load working standard The loads.

spliced with a secure eye in one one in eye secure a with spliced ID. red with yellow is core. floating and MFP Floatline MFP

site at at site web our on available are covers more traditional synthetic fibers like polyester, olefin, and and olefin, polyester, like fibers synthetic traditional more

Pro-Set-3

Double braid with a multifilament polypropylene cover cover polypropylene multifilament a with braid Double

halyards, or control lines, anticipated loads are considered working working considered are loads anticipated lines, control or halyards, ™ dock lines are pre- are lines dock HarborMaster Complete instructions for stripping stripping for instructions Complete

This type of construction is common to lines that use the the use that lines to common is construction of type This

For the iPhone and iPad this handy app features: features: app handy this iPad and iPhone the For

LINE SELECTION LINE

Floatline MFP 461 Product Code: Product peace of mind. mind. of peace

Halyard loads are best determined by your rigger. For sheets, sheets, For rigger. your by determined best are loads Halyard wakes, waves, wind or heavy seas. seas. heavy or wind waves, wakes,

or through a rope clutch or stopper. stopper. or clutch rope a through or cover, each carrying an equal percentage of the total load. load. total the of percentage equal an carrying each cover,

Samson App Samson

excellence, and experience provide our customers customers our provide experience and excellence,

smooth out the surge effects of of effects surge the out smooth to be cleated, worked on a winch, winch, a on worked cleated, be to construction incorporates a braided core within a braided braided a within core braided a incorporates construction

but consider the following: following: the consider but

all-inclusive package of technology, products, manufacturing manufacturing products, technology, of package all-inclusive

NAVY BLUE NAVY

3-STRAND

Nylon's elastic elongation helps helps elongation elastic Nylon's

cover intact wherever the line needs needs line the wherever intact cover

when nylon was still the king of synthetic fibers. This This fibers. synthetic of king the still was nylon when

650 3/32 lb lb mm Formulas for sheet loads are available in the back of this brochure, brochure, this of back the in available are loads sheet for Formulas

0.16 2.20 in .

buy Samson, you are getting a lot more than a rope. Our Our rope. a than more lot a getting are you Samson, buy

constructed of 100% nylon. nylon. 100% of constructed

weight, but it is important to leave the the leave to important is it but weight,

Samson invented the double braid in the late 1950s, 1950s, late the in braid double the invented Samson

Accurately assess your working load working your assess Accurately 500

lb lb mm 1/16 0.12 1.75

in .

999-0010 absorption, and long service life. service long and absorption, Product Code: Product

program. So where’s the advantage for you? When you you When you? for advantage the where’s So program.

difference? the What’s dock lines are are lines dock HarborMaster dependent double braids to save save to braids double dependent

Strong Super POUNDS POUNDS MILLIMETER INCHES ™ provide excellent strength, energy energy strength, excellent provide

marine, safety and rescue, arborist, utilities, even the space space the even utilities, arborist, rescue, and safety marine,

™ double braided ropes. braided double

needs, the choice becomes clear. becomes choice the needs, Per 100 ft. 100 Per Average Diameter Diameter

how large or small. All Samson Samson All small. or large how

like to strip the covers from core- from covers the strip to like

braids: single and braids Double

Samson anchor lines lines anchor Samson (Pro-Set-3), (Pro-Set-3),

BLACK

Weight Strength Size Size of lengths two and of our experience in industries as diverse as commercial commercial as diverse as industries in experience our of

to suit your vessel, no matter matter no vessel, your suit to Many high-performance sailors sailors high-performance Many

SPECIFICATIONS SPECIFICATIONS Available in 180 ft. tubes and 600 ft. spools. ft. 600 and tubes ft. 180 in Available knowledge and an accurate assessment of your sailing sailing your of assessment accurate an and knowledge

3-strand twisted constructions twisted 3-strand

double braid eye splice, splice, eye braid double

running rigging you select for your boat carries the legacy legacy the carries boat your for select you rigging running

line of double-braided dock lines lines dock double-braided of line

as Class II. Class as

180' easily dispensed from a plastic tube. tube. plastic a from dispensed easily 180'

pusher, instructions for a a for instructions pusher,

or or or Super Strong), Strong), Super N-Braid

double braids double

The choice may seem intimidating. Armed with a little little a with Armed intimidating. seem may choice The to meet the most demanding applications in the world. The The world. the in applications demanding most the meet to

Gold-N-Braid

Samson manufactures a complete complete a manufactures Samson

part with any of the high-modulus fibers, are categorized categorized are fibers, high-modulus the of any with part

and does not absorb water. water. absorb not does and in comes Lash-It!

™ Comes complete with a fid, fid, a with complete Comes

Available in double braid double in Available (Gold-

the way in developing high-performance cordage products products cordage high-performance developing in way the

perform superbly under a particular set of circumstances. circumstances. of set particular a under superbly perform weight ratio: it is stronger than steel, so light it floats, floats, it light so steel, than stronger is it ratio: weight

categorized as Class I. Those ropes, made in whole or in in or whole in made ropes, Those I. Class as categorized Training Kit Training Splice Samson

from core-dependent core-dependent from

boats are the same the are boats

all around you. For more than 140 years, Samson has led led has Samson years, 140 than more For you. around all

Choices—because not all boats are the same the are boats all not Choices—because

urethane coating, coating, urethane offers a high strength-to- high a offers Lash-It!

traditional fibers of nylon, polyester, and olefin are are olefin and polyester, nylon, of fibers traditional

designed for use as running rigging. Each is engineered to to engineered is Each rigging. running as use for designed Choices—because not all all not Choices—because

Chances are you have seen Samson synthetic lines at work work at lines synthetic Samson seen have you are Chances

LINE FOR THE JOB THE FOR LINE

A single braid made from HMPE fiber with Samthane Samthane with fiber HMPE from made braid single A Stripping covers covers Stripping DOUBLE BRAIDS DOUBLE

based on fiber type. Ropes manufactured using the the using manufactured Ropes type. fiber on based

People and technology make the difference difference the make technology and People

because of its multiple uses on any sailboat. sailboat. any on uses multiple its of because

Samson offers a large variety of ropes specifically specifically ropes of variety large a offers Samson

SPLICING LINES DOCK

   Samson ropes are classified into two main categories categories main two into classified are ropes Samson

BEST THE CHOOSING

has been called “the sailor’s duct tape” tape” duct sailor’s “the called been has Lash-It!

ANCHOR LINES ANCHOR

 

So many different ropes —need a little help choosing? help little a —need ropes different many So TECH TIP: STRIPPING COVERS STRIPPING TIP: TECH

they? are What ropes: II Class and I Class

WHY SAMSON? WHY Lash-It! 811 811 Product Code: Product ™

™ So many different ropes —need a little help choosing?  ANCHORLash-It! Product LINES Code: 811 TECH TIP: STRIPPING COVERS Class I and Class II ropes: What are they? WHY SAMSON? CHOOSING THE BEST   Lash-It! has been called “the sailor’s duct tape” Samson ropes are classified into two main categories Samson offers a large variety of ropes specifically DOCK LINES SPLICING because of its multiple uses on any sailboat. People and technology make the difference DOUBLE BRAIDS based on fiber type. Ropes manufactured using the LINE FOR THE JOB designed for use as running rigging. Each is engineered to Choices—becauseA single braid not made all from HMPE fiber with Samthane Stripping covers Chances are you have seen Samson synthetic lines at work urethane coating, Lash-It! offers a high strength-to- traditional fibers of nylon, polyester, and olefin are Choices—because not all boats are the same all around you. For more than 140 years, Samson has led perform superbly under a particular set of circumstances. Samson Splice Training Kit boats are theweight same ratio: it is stronger than steel, so light it floats, from core-dependent categorized as Class I. Those ropes, made in whole or in Available in double braid (Gold- the way in developing high-performance cordage products Comes complete with a fid, and does not absorb water. Lash-It! comes in ™ part with any of the high-modulus fibers, are categorized The choice may seem intimidating. Armed with a little Samson manufactures a complete Gold-N-Braid to meet the most demanding applications in the world. The pusher, instructions for a N-Braid or Super180' Strong),easily dispensed or from a plastic tube. double braids as Class II. line of double-braided dock lines running rigging you select for your boat carries the legacy knowledge and an accurate assessment of your sailing to suit your vessel, no matter double braid eye splice, 3-strand twistedSPECIFICATIONS constructions Available in 180 ft. tubes and 600 ft. spools. Many high-performance sailors BLACK and two lengths of (Pro-Set-3), SamsonSize anchor Sizelines Strength Weight of our experience in industries as diverse as commercial needs, the choice becomes clear. how large or small. All Samson Diameter Diameter Average Per 100 ft. like to strip the covers from core- Double braids and single braids: double braided ropes. ™ marine, safety and rescue, arborist, utilities, even the space ™ provide excellent INCHESstrength,MILLIMETER energy POUNDS POUNDSSuper Strong HarborMaster dock lines are dependent double braids to save What’s the difference? program. So where’s the advantage for you? When you Accurately assess your working load Product Code: 999-0010 absorption, and1/16 long in. service1.75 life.mm 500 lb 0.12 lb constructed of 100% nylon. weight, but it is important to leave the Samson invented the double braid in the late 1950s, buy Samson, you are getting a lot more than a rope. Our Formulas for sheet loads are available in the back of this brochure, in. 2.20 0.16 Nylon's elastic elongation helps 3/32 mm 650 lb 3-STRANDlb cover intact wherever the line needs when nylon was still the king of synthetic fibers. This but consider the following: NAVY BLUE all-inclusive package of technology, products, manufacturing smooth out the surge effects of to be cleated, worked on a winch, construction incorporates a braided core within a braided excellence, and experience provide our customers Halyard loads are best determined by your rigger. For sheets, wakes, waves, wind or heavy seas. ™ or through a rope clutch or stopper. cover, each carrying an equal percentage of the total load. Samson App MFP Floatline Product Code: 461 peace of mind. For the iPhone and iPad this handy app features: LINE SELECTION halyards, or control lines, anticipated loads are considered working HarborMaster dock lines are pre- ™ Complete instructions for stripping This type of construction is common to lines that use the Double braid with a multifilament polypropylene Pro-Set-3cover loads. The standard working load for any Samson rope is 20% of spliced with a secure eye in one GOLD/WHITE and floating core. MFP Floatline is yellow with red ID. covers are available on our web site at more traditional synthetic fibers like polyester, olefin, and So whether you’re looking for new sheets to trim your > Inspection and retirement criteria GUIDE the rated break strength. end and available in a wide range SPECIFICATIONS Available in 600 ft. spools SamsonRope.com nylon. In addition to carrying up to one-half of the load, the composite genoa or replacing the halyards on a traditional > Internal and external abrasion inspection information of diameters and lengths. Size Size Strength Weight cover serves to protect the core from abrasion or ultraviolet 2019 For example, the total load for an end-of-boom mainsheet going Diameter Diameter Average Per 100 ft. schooner, look for Samson. It assures you of performance > Splice Instructions Samson anchor lines are shipped with a prespliced degradation, to provide grip on winches or in clutches and through a four-purchase sheave system may be calculated at INCHES MILLIMETER POUNDS POUNDS you can depend on, anytime, anyplace. Download it at SamsonRope.com 900 lbs. Factoring in a 20% working load, the rope’s break WHITE WITH TRACERS 1/4 in.high-strength,6 reinforcedmm captive1,700 lbthimble. Smaller1.4 lb stoppers, and to provide protection from friction- Dock & Anchor Lines diameters are shipped in convenient, reusable plastic Samson Splicing Kit 3/8 in. 9 mm 3,200 lb 2.7 lb generated heat. strength needs to be five times the working load, or 4,500 lbs. tote boxes. Longer lengths on spools are available. for this application. CHECK YOUR LOCAL DEALER FOR COLOR AND SIZE AVAILABILITY. Comes with a pusher, and 5 aluminum tubular fids 1/2 in. 12 mm 5,200 lb 4.5 lb > TECHNOLOGY Staffed with dedicated scientists and Whether power or sail, the most (size range 1/4" through 1/2" diameter). Contact your local Samson dealer for more information. For applications that require higher strength and lighter frequently used lines aboard are DOCK LINE SELECTION GUIDE 5/8 in. 16 mm 7,400 lb 8.0 lb TECH TIP: HALYARDS weight than traditional Class I fibers provide, you will look application engineers, Samson’s R&D department is Synthetic fibers: What are the differences? Product Code: 999-0070 dedicated to problem solving, and leads the industry in Nylon was the first synthetic fiber widely used in ropes. Reasonably the dock and anchor lines Strengths are approximate averages of new rope. to a core-dependant double braid. In this construction, the It’s a fact of boating life that, for most of ANCHOR LINE SELECTION™ GUIDE Upgrade Your Halyards the development of lighter, stronger, more durable ropes. Quik-Splice Product Code: 335 core is made from Class II fibers and serves as the strength strong (much stronger than the natural fibers it replaced), nylon is DOCK Strengths are approximate averages of new rope. Equally important to product innovation is our ability to still used in dock and anchor lines where its excellent elasticity allows us, our boats spend more time moored LINE 3/8" 1/2" 5/8" 3/4"** Quik-Splice is a fast-splicing single braid constructed Have you ever had a difficult time furling your jib when the member while the cover is typically made of Class I fibers. (9 mm) (12 mm) (16 mm) (18 mm) ™ ™ ™ stand confidently behind our products with accurate, it to absorb shock loads. than underway. Protect your investment Boat LENGTH Boat Size Gold-N-Braidwith high-strength SuperUltra StrongBlue copolymer olefinPro-Set fiber. breeze picked up? Many times, this is due to an old halyard Size FEET 4,900 lb 8,200 lb 13,500 lb 22,200 lb It floats and has high wet and dry abrasion resistance. Single braids are ropes designed without a separate core. reliable product specifications based on rigorous testing and give yourself a little peace of mind 3/8 in. 3/8 in. 3/8 in. The introduction of polyester fiber allowed rope manufacturers to 15–25 ft The Ultra Blue fiber has excellent dielectric properties that is stretching. This causes your jib to sag at the luff, and and measuring. by ensuring that you’ve got the best 4,500 lb 4,900 lb 3,600 lb Samson manufactures a wide variety of single braids. For build ropes that were as strong as nylon, but with much less stretch 15–25 ft 10'   and provides superior resistance to sunlight keeps the furler from spinning freely. sailing applications, the most common single braid is a dock and anchor lines available. 3/8 in. 3/8 in. 1/2 in. > PRODUCTS Samson products are considered state of the and wet-strength loss. Because it has excellent grip, it works well 26–30 ft degradation. 12-strand line. Where necessary or desired, covers can be 4,500 lb 4,900 lb 6,300 lb Upgrade your halyards to any of Samson’s low-stretch, art by sailors around the world. Samson has pioneered on winches. Polyester ropes, particularly polyester double braids, ft SPECIFICATIONS Available in 500 ft. spools added to single braids to protect them from exposure to Is there really a difference? 26–30 15'   3/8 in. 3/8 in. 1/2 in. lightweight, high-strength options, and watch your jib furl 31–35 ft Size Size Strength Weight the use of new synthetic fibers, unique constructions, became the standard against which all ropes were measured. Yes. All Samson lines are built with 4,500 lb 4,900 lb 6,300 lb heat, abrasion, or cutting while in use. Diameter Diameter Average Per 100 ft. easier under all conditions. and coatings to improve the service life of ropes, reduce Polyester is still regarded as an excellent fiber for many marine 100% premium nylon that provides INCHES MILLIMETER POUNDS POUNDS 31–35 ft 20' 1/2 in. 1/2 in. 5/8 in. ®    36–40 ft Alternately, a sailor may opt to strip the cover from a double weight, reduce snagging, enhance abrasion resistance, Dyneema is a registered applications and is widely used for covers on high-performance, excellent stretch and flexibility. Nylon’s 1/47,900 in. lb 6 mm8,600 lb 1,400 lb 10,0001.1 lb lb braid in order to save additional weight aloft for halyard and make splicing easier. trademark of Royal DSM N.V. or high-modulus double braids. elastic elongation properties help smooth 5/16 in. 8 mm 2,500 lb 1.7 lb ® 36–40 ft 25' 1/2 in. 1/2 in. 5/8 in. Dyneema is DSM’s high-performance    41–50 ft applications. The cover remains intact in areas on the rope polyethylene product. out the surge effects of wakes, waves, wind, ™ 3/87,900 in. lb 9 mm8,600 lb 3,500 lb 10,0002.7 lb lb Use a blended-core halyard on a jib > MANUFACTURING Samson’s standards of manufacturing High-modulus fibers: Which one, for what, and why? Selma Fids where the rope is cleated or winched. or heavy seas, making nylon the perfect fiber 7/165/8 in.in. 11 mm5/8 in. 4,600 lb 3/43.5 in.lb guarantee a quality product every time. Our There are several modern high-modulus fibers, each with a unique 41–50 ft 30' Made from highly polished stainless steel, Selma Fids are 51–60 ft furler so you do not stretch the sail TRADEMARK NOTICES: for dock and anchor lines. All of Samson’s   14,000 lb 15,200 lb 13,500 lb ® ® patented worldwide. Available in sets only, the Selma 1/2 in. 12 mm 6,700 lb 4.7 lb manufacturing plants, in Lafayette, Louisiana and AmSteel and AmSteel -Blue are registered trademarks set of characteristics. The challenge of the rope designer is to match Splicing techniques: of Samson Rope Technologies, Inc. colored dock lines are produced with 9/163/4 in.in. 14 mm3/4 in. 7,500 lb 7/86.0 in.lb beyond its design. Fid may be used to splice hollow braided lines 61–75 ft Ferndale, Washington are both ISO certified and utilize these characteristics with the unique performance requirements 51–60 ft 35' 19,400 lb 18,800 lb 19,000 lb Why is knowing the class of my line important? All Samson named products herein are trademarks of solution-dyed nylon to prevent bleed or fade.    from 1/8" to 9/16", or double braid and 5/8 in. 16 mm 10,900 lb 7.8 lb LEAN manufacturing principles. of the application for which they are designing. Samson Rope Technologies, Inc. 3-strand rope up to 1-1/8". 7/8 in. 1 in. Splicing techniques are different between Class I and 76–90 ft ® 29,000 lb 25,000 lb Class II ropes and reflect the differences in strengths and > SERVICE World-class service and support, whenever you Dyneema is a high-modulus polyethylene (HMPE) fiber with a Consistent quality from 61–75 ft 40' & 50'   Product Code: 903 ™ particularly well balanced set of characteristics that allow it to be the company that moors Accessory Cord1 in. Product Code: 480 grip between the two groups. It is absolutely critical to use need it, wherever you need it. 91–100 ft used in a variety of applications. Extremely lightweight with ultra-high more vessels than any other *For storm conditions upgrade one size and double chafe protection. With a polyester36,000 cover lband nylon core, the correct splice for the class of rope being used. The Samson’s Accessory Cord has excellent > EXPERIENCE When you sail with Samson, your boat carries strength, very low stretch, and excellent abrasion, cut, Our recreational marine products are **3/4" dock lines are available in black and navy blue only. 1 in. product specifications include rope construction, class and 101–120 ft flexibility, knotting, and strength characteristics the legacy of our 140+ years’ experience providing rope and UV resistance, it is well-suited for use in halyards, control subjected to the same rigorous testing 36,000 lb recommended splicing technique. for a smooth running, torque-free cord. to diverse industries. Known for excellence and quality, lines, and sheets. and quality control under which we SPECIFICATIONS Available in 500 ft. spools we have the experience, integrity, and reliability you can produce mooring lines and hawsers CUSTOM DOCK LINES Formulas for calculating Other high-modulus fibers include aramid fibers that blend very high custom dock lines: Size Size Strength Weight get only from The Strongest Name in Rope. for some of the world’s largest ANCHORDiameter LINE DiameterLENGTHS Average Per 100 ft. 2090 Thornton Street, strength, low stretch, and abrasion resistance with extreme heat INCHES MILLIMETER POUNDS POUNDS vessels. They are also professionally Bow Lines = 1-1/2 × Beam ™ ™ ™ resistance; liquid crystal polymer (LCP) fibers; and PBO fibers, which Diameter Gold-N-Braid5/64 in. 2Supermm Strong 230 lb Pro-Set0.20 lb Ferndale, WA 98248 USA prespliced, with thimbles included INCHES FEET FEET FEET offer the highest strength of all the high-modulus fibers; however, it 1/8 in. 3 0.50 Tel 01.360.384.4669 on all anchor lines. Spring Lines = 3/4 × Length Over All mm 600 lb lb must be protected from UV light. These are all exceptionally low- 3/8 in. 100',5/32 150', in. 200' 4100',mm 150', 200'1,000 lb 100',0.80 150'lb Fax 01.360.384.0572 creep fibers. Stern Lines = 1-1/2 to 2 × Beam Visit SamsonRope.com for detailed 1/2 in. 100',3/16 150', in. 200' 100', 5150',mm 200', 250',1,200 300'lb 100', 150',1.4 200',lb 300' SamsonRope.com In some cases, Samson blends fibers to take advantage of the 1/4 in. 6 mm 2,200 lb 1.8 lb splice instructions, available in 5/8 in. 200', 250' 150', 200', 250', 300' 150', 200', 250' relative properties of each of the components. See our product 9/32 in. 7 mm 2,800 lb 2.3 lb © 2016/2019 Samson Rope Technologies, Inc. All rights reserved. 2680 1.5K 06/2019 descriptions for more information. video and PDF formats 5/16 in. 8 mm 3,500 lb 3.0 lb 3/8 in. 9 mm 4,300 lb 3.8 lb

4,300 lb lb mm 3/8 3/8 3.8 9 in.

3,500 lb lb mm 5/16 5/16 8 3.0 in. descriptions for more information. more for descriptions video and PDF formats PDF and video

2,800 lb lb mm 9/32 9/32 2.3 7

relative properties of each of the components. See our product product our See components. the of each of properties relative in.

splice instructions, available in in available instructions, splice

2,200 lb lb mm 1/4 1/4 1.8 6 In some cases, Samson blends fibers to take advantage of the the of advantage take to fibers blends Samson cases, some In in.

Visit SamsonRope.com for detailed detailed for SamsonRope.com Visit 1,200 lb lb mm 3/16 1.4 5 in.

creep fibers. creep 1-1/2 to 2 × Beam × 2 to 1-1/2 Stern Lines = = Lines Stern

1,000 lb lb mm 5/32 5/32 0.80 4 in. must be protected from UV light. These are all exceptionally low- exceptionally all are These light. UV from protected be must

on all anchor lines. anchor all on

3/4 × Length Over All Over Length × 3/4 Spring Lines = = Lines Spring

600 lb lb mm 1/8 1/8 0.50 3 in. offer the highest strength of all the high-modulus fibers; however, it it however, fibers; high-modulus the all of strength highest the offer

prespliced, with thimbles included included thimbles with prespliced,

230 lb lb mm 5/64 0.20 2 in.

resistance; liquid crystal polymer (LCP) fibers; and PBO fibers, which which fibers, PBO and fibers; (LCP) polymer crystal liquid resistance;

1-1/2 × Beam × 1-1/2 Bow Lines = = Lines Bow

vessels. They are also professionally professionally also are They vessels.

POUNDS POUNDS MILLIMETER INCHES

strength, low stretch, and abrasion resistance with extreme heat heat extreme with resistance abrasion and stretch, low strength,

for some of the world’s largest largest world’s the of some for

Per 100 ft. 100 Per Average Diameter Diameter

Other high-modulus fibers include aramid fibers that blend very high high very blend that fibers aramid include fibers high-modulus Other custom dock lines: dock custom Weight Strength Size Size

hawsers and lines mooring produce

CUSTOM DOCK LINES DOCK CUSTOM

calculating for Formulas

SPECIFICATIONS Available in 500 ft. spools ft. 500 in Available

and quality control under which we we which under control quality and lines, and sheets. sheets. and lines,

for a smooth running, torque-free cord. cord. torque-free running, smooth a for

subjected to the same rigorous testing testing rigorous same the to subjected control halyards, in use for well-suited is it resistance, UV and

flexibility, knotting, and strength characteristics characteristics strength and knotting, flexibility,

Our recreational marine products are are products marine recreational Our cut, abrasion, excellent and stretch, low very strength,

**3/4" dock lines are available in black and navy blue only. only. blue navy and black in available are lines dock **3/4"

excellent has Samson’s Accessory Cord Cord Accessory

other any than vessels more

used in a variety of applications. Extremely lightweight with ultra-high ultra-high with lightweight Extremely applications. of variety a in used

protection. chafe double and size one upgrade conditions storm *For

core, nylon and cover polyester a With

moors that company the particularly well balanced set of characteristics that allow it to be be to it allow that characteristics of set balanced well particularly Cord Accessory 480 Product Code: Code: Product

903 Product Code: Product   ™

40' & 50' & 40' 61–75

ft is a high-modulus polyethylene (HMPE) fiber with a a with fiber (HMPE) polyethylene high-modulus a is Dyneema from quality Consistent

®

3-strand rope up to 1-1/8". 1-1/8". to up rope 3-strand

of the application for which they are designing. designing. are they which for application the of

from 1/8" to 9/16", or double braid and and braid double or 9/16", to 1/8" from 10,900

5/8 5/8

7.8 16 lb lb mm in.

solution-dyed nylon to prevent bleed or fade. fade. or bleed prevent to nylon solution-dyed

  

35' 51–60

ft

requirements performance unique the with characteristics these

Fid may be used to splice hollow braided lines lines braided hollow splice to used be may Fid

7,500 9/16 9/16 14 6.0 lb lb mm in. colored dock lines are produced with with produced are lines dock colored

set of characteristics. The challenge of the rope designer is to match match to is designer rope the of challenge The characteristics. of set

patented worldwide. Available in sets only, the Selma Selma the only, sets in Available worldwide. patented

6,700

1/2 1/2 4.7 12 lb lb mm in.

for dock and anchor lines. All of Samson’s Samson’s of All lines. anchor and dock for

 

30' 41–50

There are several modern high-modulus fibers, each with a unique unique a with each fibers, high-modulus modern several are There

ft

Made from highly polished stainless steel, Selma Fids are are Fids Selma steel, stainless polished highly from Made

4,600 7/16 7/16 3.5 11 lb lb mm in. or heavy seas, making nylon the perfect fiber fiber perfect the nylon making seas, heavy or

Fids Selma High-modulus fibers: Which one, for what, and why? and what, for one, Which fibers: High-modulus

3,500 3/8 3/8 2.7 9 lb lb mm in. out the surge effects of wakes, waves, wind, wind, waves, wakes, of effects surge the out

  

25' 36–40

ft

2,500 5/16 5/16 1.7 8 lb lb mm in. smooth help properties elongation elastic or high-modulus double braids. double high-modulus or

1,400 1/4 1.1 6 lb lb mm in.

excellent stretch and flexibility. Nylon’s Nylon’s flexibility. and stretch excellent high-performance, on covers for used widely is and applications

  

20' 31–35

ft

100% premium nylon that provides provides that nylon premium 100% POUNDS POUNDS MILLIMETER INCHES Polyester is still regarded as an excellent fiber for many marine marine many for fiber excellent an as regarded still is Polyester

Per 100 ft. 100 Per Average Diameter Diameter

with built are lines Samson All Yes. became the standard against which all ropes were measured. measured. were ropes all which against standard the became

Weight Strength Size Size

 

15' 26–30

Is there really a difference? a really there Is ft

SPECIFICATIONS on winches. Polyester ropes, particularly polyester double braids, braids, double polyester particularly ropes, Polyester winches. on Available in 500 ft. spools ft. 500 in Available

and wet-strength loss. Because it has excellent grip, it works well well works it grip, excellent has it Because loss. wet-strength and degradation. degradation.

dock and anchor lines available. lines anchor and dock

  build ropes that were as strong as nylon, but with much less stretch stretch less much with but nylon, as strong as were that ropes build 10' 15–25

ft sunlight to resistance superior provides and

by ensuring that you’ve got the best best the got you’ve that ensuring by The Ultra Blue fiber has excellent dielectric properties properties dielectric excellent has fiber Blue Ultra The The introduction of polyester fiber allowed rope manufacturers to to manufacturers rope allowed fiber polyester of introduction The

and give yourself a little peace of mind mind of peace little a yourself give and lb 22,200 lb 13,500 lb 8,200 lb 4,900 It floats and has high wet and dry abrasion resistance. resistance. abrasion dry and wet high has and floats It FEET Size

it to absorb shock loads. loads. shock absorb to it

LENGTH Boat

than underway. Protect your investment investment your Protect underway. than with high-strength Ultra Blue copolymer olefin fiber. fiber. olefin copolymer Blue Ultra high-strength with mm) (18 mm) (16 mm) (12 mm) (9

still used in dock and anchor lines where its excellent elasticity allows allows elasticity excellent its where lines anchor and dock in used still

LINE

is a fast-splicing single braid constructed constructed braid single fast-splicing a is Quik-Splice

3/4"** 5/8" 1/2" 3/8" us, our boats spend more time moored moored time more spend boats our us,

DOCK

strong (much stronger than the natural fibers it replaced), nylon is is nylon replaced), it fibers natural the than stronger (much strong Quik-Splice 335 Product Code: Code: Product

It’s a fact of boating life that, for most of of most for that, life boating of fact a It’s

Nylon was the first synthetic fiber widely used in ropes. Reasonably Reasonably ropes. in used widely fiber synthetic first the was Nylon

the dock and anchor lines anchor and dock the

Strengths are approximate averages of new rope. new of averages approximate are Strengths

999-0070 Product Code: Product

Synthetic fibers: What are the differences? the are What fibers: Synthetic

GUIDE SELECTION LINE DOCK

frequently used lines aboard are are aboard lines used frequently

7,400 lb lb mm 5/8 5/8 8.0 16 in.

(size range 1/4" through 1/2" diameter). 1/2" through 1/4" range (size

Whether power or sail, the most most the sail, or power Whether

for this application. this for

5,200 lb lb mm 1/2 1/2 4.5 12 in.

Comes with a pusher, and 5 aluminum tubular fids fids tubular aluminum 5 and pusher, a with Comes

CHECK YOUR LOCAL DEALER FOR COLOR AND SIZE AVAILABILITY. SIZE AND COLOR FOR DEALER LOCAL YOUR CHECK

strength needs to be five times the working load, or 4,500 lbs. lbs. 4,500 or load, working the times five be to needs strength

3,200 lb lb mm 3/8 3/8 2.7 9 in. Samson Splicing Kit Splicing Samson

Dock & Anchor Lines Anchor & Dock

break rope’s the load, working 20% a in Factoring lbs. 900

1,700 lb lb mm 1/4 1.4 6 in. WHITE WITH TRACERS WITH WHITE

at calculated be may system sheave four-purchase a through

POUNDS POUNDS MILLIMETER INCHES

Per 100 ft. 100 Per Average Diameter Diameter

For example, the total load for an end-of-boom mainsheet going going mainsheet end-of-boom an for load total the example, For

of diameters and lengths. lengths. and diameters of

Weight Strength Size Size

SPECIFICATIONS SPECIFICATIONS Available in 600 ft. spools ft. 600 in Available the rated break strength. break rated the end and available in a wide range range wide a in available and end

GOLD/WHITE of 20% is rope Samson any for load working standard The loads. spliced with a secure eye in one one in eye secure a with spliced ID. red with yellow is core. floating and MFP Floatline MFP

Double braid with a multifilament polypropylene cover cover polypropylene multifilament a with braid Double halyards, or control lines, anticipated loads are considered working working considered are loads anticipated lines, control or halyards, dock lines are pre- are lines dock HarborMaster

Floatline MFP 461 Product Code: Product

Halyard loads are best determined by your rigger. For sheets, sheets, For rigger. your by determined best are loads Halyard wakes, waves, wind or heavy seas. seas. heavy or wind waves, wakes,

smooth out the surge effects of of effects surge the out smooth

but consider the following: following: the consider but

NAVY BLUE NAVY

Nylon's elastic elongation helps helps elongation elastic Nylon's

650 3/32 lb lb mm brochure, this of back the in available are loads sheet for Formulas 0.16 2.20 in .

constructed of 100% nylon. nylon. 100% of constructed

Accurately assess your working load working your assess Accurately 500 lb lb mm 1/16 0.12 1.75 in . 999-0010 Product Code: Product

dock lines are are lines dock HarborMaster

POUNDS POUNDS MILLIMETER INCHES ™

double braided ropes. braided double

needs, the choice becomes clear. becomes choice the needs, Per 100 ft. 100 Per Average Diameter Diameter

how large or small. All Samson Samson All small. or large how

BLACK

Weight Strength Size Size of lengths two and

to suit your vessel, no matter matter no vessel, your suit to

SPECIFICATIONS SPECIFICATIONS Available in 180 ft. tubes and 600 ft. spools. ft. 600 and tubes ft. 180 in Available knowledge and an accurate assessment of your sailing sailing your of assessment accurate an and knowledge splice, eye braid double

line of double-braided dock lines lines dock double-braided of line

180' easily dispensed from a plastic tube. tube. plastic a from dispensed easily 180'

a for instructions pusher,

The choice may seem intimidating. Armed with a little little a with Armed intimidating. seem may choice The

Samson manufactures a complete complete a manufactures Samson

in comes water. absorb not does and Lash-It! Comes complete with a fid, fid, a with complete Comes

perform superbly under a particular set of circumstances. circumstances. of set particular a under superbly perform weight ratio: it is stronger than steel, so light it floats, floats, it light so steel, than stronger is it ratio: weight Training Kit Training Splice Samson

Choices—because not all boats are the same the are boats all not Choices—because

offers a high strength-to- high a offers coating, urethane Lash-It!

designed for use as running rigging. Each is engineered to to engineered is Each rigging. running as use for designed

LINE FOR THE JOB THE FOR LINE A single braid made from HMPE fiber with Samthane Samthane with fiber HMPE from made braid single A

sailboat. any on uses multiple its of because Samson offers a large variety of ropes specifically specifically ropes of variety large a offers Samson

SPLICING LINES DOCK

  

BEST THE CHOOSING

has been called “the sailor’s duct tape” tape” duct sailor’s “the called been has Lash-It!

So many different ropes —need a little help choosing? help little a —need ropes different many So

Lash-It! 811 811 Product Code: Product ™

 ANCHOR LINES TECH TIP: STRIPPING COVERS Class I and Class II ropes: What are they? WHY SAMSON? Samson ropes are classified into two main categories People and technology make the difference based on fiber type. Ropes manufactured using the DOUBLE BRAIDS Stripping covers Chances are you have seen Samson synthetic lines at work Choices—because not all traditional fibers of nylon, polyester, and olefin are all around you. For more than 140 years, Samson has led boats are the same from core-dependent categorized as Class I. Those ropes, made in whole or in Available in double braid (Gold- the way in developing high-performance cordage products ™ part with any of the high-modulus fibers, are categorized Gold-N-Braid to meet the most demanding applications in the world. The N-Braid or Super Strong), or double braids as Class II. 3-strand twisted constructions running rigging you select for your boat carries the legacy Many high-performance sailors of our experience in industries as diverse as commercial (Pro-Set-3), Samson anchor lines like to strip the covers from core- Double braids and single braids: ™ marine, safety and rescue, arborist, utilities, even the space provide excellent strength, energy Super Strong dependent double braids to save What’s the difference? absorption, and long service life. program. So where’s the advantage for you? When you weight, but it is important to leave the Samson invented the double braid in the late 1950s, buy Samson, you are getting a lot more than a rope. Our 3-STRAND cover intact wherever the line needs when nylon was still the king of synthetic fibers. This all-inclusive package of technology, products, manufacturing to be cleated, worked on a winch, construction incorporates a braided core within a braided excellence, and experience provide our customers Samson App or through a rope clutch or stopper. cover, each carrying an equal percentage of the total load. peace of mind. Complete instructions for stripping This type of construction is common to lines that use the For the iPhone and iPad this handy app features: LINE SELECTION Pro-Set-3™ covers are available on our web site at more traditional synthetic fibers like polyester, olefin, and So whether you’re looking for new sheets to trim your > Inspection and retirement criteria GUIDE SamsonRope.com nylon. In addition to carrying up to one-half of the load, the composite genoa or replacing the halyards on a traditional > Internal and external abrasion inspection information cover serves to protect the core from abrasion or ultraviolet schooner, look for Samson. It assures you of performance > Splice Instructions 2019 degradation, to provide grip on winches or in clutches and Samson anchor lines are shipped with a prespliced you can depend on, anytime, anyplace. Download it at high-strength, reinforced captive thimble. Smaller stoppers, and to provide protection from friction- SamsonRope.com diameters are shipped in convenient, reusable plastic generated heat. tote boxes. Longer lengths on spools are available. Contact your local Samson dealer for more information. For applications that require higher strength and lighter > TECHNOLOGY Staffed with dedicated scientists and TECH TIP: HALYARDS weight than traditional Class I fibers provide, you will look application engineers, Samson’s R&D department is to a core-dependant double braid. In this construction, the dedicated to problem solving, and leads the industry in ANCHOR LINE SELECTION GUIDE Upgrade Your Halyards core is made from Class II fibers and serves as the strength the development of lighter, stronger, more durable ropes. Strengths are approximate averages of new rope. Equally important to product innovation is our ability to Have you ever had a difficult time furling your jib when the member while the cover is typically made of Class I fibers. ™ ™ ™ stand confidently behind our products with accurate, Boat Size Gold-N-Braid Super Strong Pro-Set breeze picked up? Many times, this is due to an old halyard Single braids are ropes designed without a separate core. reliable product specifications based on rigorous testing 3/8 in. 3/8 in. 3/8 in. 15–25 ft that is stretching. This causes your jib to sag at the luff, and and measuring. 4,500 lb 4,900 lb 3,600 lb Samson manufactures a wide variety of single braids. For keeps the furler from spinning freely. sailing applications, the most common single braid is a 3/8 in. 3/8 in. 1/2 in. 26–30 ft > PRODUCTS Samson products are considered state of the 4,500 lb 4,900 lb 6,300 lb Upgrade your halyards to any of Samson’s low-stretch, 12-strand line. Where necessary or desired, covers can be added to single braids to protect them from exposure to art by sailors around the world. Samson has pioneered 3/8 in. 3/8 in. 1/2 in. lightweight, high-strength options, and watch your jib furl 31–35 ft heat, abrasion, or cutting while in use. the use of new synthetic fibers, unique constructions, 4,500 lb 4,900 lb 6,300 lb easier under all conditions. and coatings to improve the service life of ropes, reduce

1/2 in. 1/2 in. 5/8 in. ® 36–40 ft Alternately, a sailor may opt to strip the cover from a double weight, reduce snagging, enhance abrasion resistance, Dyneema is a registered 7,900 lb 8,600 lb 10,000 lb braid in order to save additional weight aloft for halyard and make splicing easier. trademark of Royal DSM N.V. 1/2 in. 1/2 in. 5/8 in. Dyneema® is DSM’s high-performance 41–50 ft applications. The cover remains intact in areas on the rope 7,900 lb 8,600 lb 10,000 lb Use a blended-core halyard on a jib > MANUFACTURING Samson’s standards of manufacturing polyethylene product. where the rope is cleated or winched. 5/8 in. 5/8 in. 3/4 in. furler so you do not stretch the sail guarantee a quality product every time. Our TRADEMARK NOTICES: 51–60 ft ® ® 14,000 lb 15,200 lb 13,500 lb Splicing techniques: manufacturing plants, in Lafayette, Louisiana and AmSteel and AmSteel -Blue are registered trademarks 3/4 in. 3/4 in. 7/8 in. beyond its design. of Samson Rope Technologies, Inc. 61–75 ft Ferndale, Washington are both ISO certified and utilize 19,400 lb 18,800 lb 19,000 lb Why is knowing the class of my line important? All Samson named products herein are trademarks of LEAN manufacturing principles. Samson Rope Technologies, Inc. 7/8 in. 1 in. Splicing techniques are different between Class I and 76–90 ft 29,000 lb 25,000 lb Class II ropes and reflect the differences in strengths and > SERVICE World-class service and support, whenever you 1 in. grip between the two groups. It is absolutely critical to use need it, wherever you need it. 91–100 ft 36,000 lb the correct splice for the class of rope being used. The > EXPERIENCE When you sail with Samson, your boat carries 1 in. product specifications include rope construction, class and 101–120 ft 36,000 lb recommended splicing technique. the legacy of our 140+ years’ experience providing rope to diverse industries. Known for excellence and quality, we have the experience, integrity, and reliability you can get only from The Strongest Name in Rope. ANCHOR LINE LENGTHS 2090 Thornton Street,

™ ™ ™ Diameter Gold-N-Braid Super Strong Pro-Set Ferndale, WA 98248 USA INCHES FEET FEET FEET Tel 01.360.384.4669 3/8 in. 100', 150', 200' 100', 150', 200' 100', 150' Fax 01.360.384.0572 1/2 in. 100', 150', 200' 100', 150', 200', 250', 300' 100', 150', 200', 300' SamsonRope.com 5/8 in. 200', 250' 150', 200', 250', 300' 150', 200', 250' © 2016/2019 Samson Rope Technologies, Inc. All rights reserved. 2680 1.5K 06/2019