ASSEMBLY GUIDE HD-3 Electronic Drum Kit

EASY ASSEMBLY GUIDE IF YOU HAVE ANY QUESTIONS CALL OUR TOLL FREE HELPLINE 888-998-9848 DO NOT RETURN TO THE STORE UNBOXING YOUR DRUM KIT

1. Carefully unpack all contents of box

(1) Crash Cymbal (1) Ride Cymbal

(1) Hi-Hat Cymbal

(3) Tom Drums

(1) Sound Module (1) Snare Drum

Hi-Hat Control Pedal Kick Pedal

Drum Kit Components

Cymbal Arms Cymbals

Drum Frame

Toms Snare

Not Pictured: TO CRASH TO RIDE

TO TOM1 TO TOM2 T TO HH O M 3 T R I D E (1) Labeled Wiring Harness O M 2 TO TOM3 C R A S H T O M 1

TO KICK S N A R E

TO SNARE H K I C H C M A S T E R O U

(1) Pair Drumsticks A U X I N T O H U S O B S (1) Drumstick Holder T Velcro Strips Sound Module Hi-Hat Control Pedal Kick Pedal DRUM KIT ASSEMBLY

2. Attach the cymbal arms to the drum frame 3. Attach the cymbals to the cymbal arms as indicated positions . shown.

4. Align the holes in Snare Drum Pad and the three Tom Drum Pads and insert them into 5. Attach the Drum Pads in the positions the pole on the Drum Frame as shown. hown below. DRUM KIT ASSEMBLY (CON’T)

6. Insert the rod of sound module stand into 7. Please put Hi-hat control pedal on the the Drum Frame clamp as shown, then tight- left and Kick pedal on the right. en.

DRUM KIT WIRING DIAGRAM

8. Connect the wiring harness to the interface at the bottom of the drum sound module, then connect the labeled cables to their corresponding drum pads, cymbals and pedals, as show below.

Drum Module Connector Panel

CRASH RIDE

RIDE CRASH Hi-hat Hi-hat control

TOM1 TOM2 Hi-hat

USB RIDE CRASH HH HHC MASTER OUT TO HOST TOM3

TOM3 TOM2 TOM1 SNARE KICK AUX IN

SNARE

TOM3 TOM2 TOM1 SNARE KICK

KICK Hi-hat control DRUM THRONE ASSEMBLY

9. Extend the drum throne legs and secure the legs with the wingut. (fig 1) Fasten the drum throne stool to the height adjustment rod and secure the stool with the wingnut. (fig 2) Set up the drum throne at the desired height as shown below. (fig 3)

(fig. 1) (fig. 2) (fig. 3)

10. Attach the included power supply adapter and the headphones to drum sound module connector panel.

POWER PHONES ON OFF DC 9V

17 18 AC POWER If you have any questions about your drum kit please contact us toll free 888-998-9848

Virgin (VMI) is the Parent Company of Hitman Drums Virgin Musical Instrument Company PO BOX 2908 LA MESA, CA 91943 [email protected] www.virginmusicalinstruments.com