<<

What is Cast | What is | What is

Hello, friends in this article I am going to tell you about What is | What is Wrought iron and What is Steel. So I hope you will get full knowledge about it.

Iron is a hard used for different types of construction work like to make beam and column of steel, to make equipment like a spade, scissors hammer, etc. These are also useful for making vehicles frame, making body or making it on the gate. There is a huge rate of using different types of iron and steel according to their uses and need.

So let’s move toward What is Cast iron | What is Wrought iron. a) Cast iron:- Cast iron is a more purified form of iron, which contains less amount of impurities that in the . This is obtained by remelting of pig iron in the -like structure known as a cupola.

Cast Iron

Properties if cast iron:-

Cast iron is neither malleable nor ductile. Cast are Brittle in nature. It is less corrosive It is Good in compression but weak in tension. It Can’t be welded together. It’s Melting point 1200°c. It’s Specific gravity 7.5 It can be Soften in saline water. It Can be hardened but can’t tamper. b) Wrought iron:- Wrought iron is a pure form of pig iron. It is a purified form of iron. It contains 99.5% pure iron and 0.5% other matter.(I,e, , sulfide, phosphide, silica, , silica, and ). It is ductile in nature.

Wrought iron

Properties of wrought iron:-

Wrought iron is Malleable and ductile. It’s Melting point 1500°c It’s Specific gravity 7.8 It is Less corrosive (rusting) It can be welded together It is Good in tension and compression both. c) Steel:- Steel is the of iron and now a days becomes the backbone of civil construction. Steel may be plain steel alloy. Plain carbon steel is the at which carbon only forms alloy about 92% steel is produced from plain carbon steel and 8% is found from alloy.

Properties of steel are:-

Steel possesses high strength than other forms of the iron. i.e, cast and wrought iron. It can absorb shock and elastic. It is malleable in ductile. It’s melting point is 1300°c to 1400°c Its specific gravity is 7.85 Heat treatment can be done in the stream to improve drain distribution and quality of steel. Some steel has resistance but plain carbon steel is defected by corrosion.

So, friends, I hope this article on the Difference between cast iron, wrought iron, and mild steel remains helpful for you.

Thank you

Different Between Wrought iron and Cast Iron Read More,

Different between Compaction and Consolidation

What is DPC, RCC, and PCC in Civil Engineering?