SIOUX porcelain stoneware WOOD-LOOK PORCELAIN STONEWARE Brown
DOMSXBR848
| 8 x 48 | WOOD-LOOK PORCELAIN STONEWARE Cinnamon
DOMSXCI848
| 8 x 48 | WOOD-LOOK PORCELAIN STONEWARE Clay
DOMSXCL848
| 8 x 48 | WOOD-LOOK PORCELAIN STONEWARE Grey
DOMSXGR848
| 8 x 48 | WOOD-LOOK PORCELAIN STONEWARE Oak
DOMSXOA848
| 8 x 48 | WOOD-LOOK PORCELAIN STONEWARE White
DOMSXWH848
| 8 x 48 | Suggested Floor Wall Residential Light Commercial Heavy Commercial Exterior Pools *Wear can vary greatly. Applications please consult with a professional.
Modular Setting Joint Size Matte Polished Structured Installation Plank Installation* *Install the o set the width of the plank. For professional installation, the use of Honed Semi-Polished ______Suggestions leveling spacers for all plank and rectangular (ie. 12x24) format tiles is recommended. Straight/Pressed Rustic Recti ed EDGE: FINISH:
Porcelain Type through-body color-bodied glazed unglazed double-loaded other ______V1 V2 V3 V4 Shade Uniform Slight Moderate Substantial 10mm 36 Appearance Variation Variation Variation
Variation THICKNESS: # OF FACES:
DIN 51097 DCOF Values Applications 0.42 Recommended Standard DCOF value Class Typical Applications Critical Angle Slip .54 for wet/dry commercial ooring Resistance A Barefoot, but mainly dry aisles and walkways, dry changing areas >12° 0.65 Recommended Standard DCOF value for ADA ramps Shower rooms, pool surrounds, wet changing areas, B >18° disinfectant spray areas (plus all Class A areas) ASTM C-1028 DIN 51130 *R9: Industry Standard/ADA Requirements **R11: Recommended For Exteriors ANSI A137.1 R9* (3-10°) R10 (10-19°) R11** (19-27°) C Areas constantly under water, e.g. steps into pools, foot baths, >24° inclinded pool surrounds, jacuzzis (plus all Class A&B areas) DIN 51097/51130 R12 (27-35°) R13 (>35°) MINERAL Wear Class 1: Walls only Scratch 1. Talc (Talc) 6. Microline (Glass, Glazed Tile) Class 2: Residential oors w/minimal abrasive tra c 2. Gypsum (Fingernail) 7. Quartz (Unglazed Porcelain) Resistance Resistance Class 3: Residential interiors/light commercial tra c 3. Calcite (Penny) 8. Topaz (Granite) MOH’S SCALE 4. Flourite (Some Marbles) 9. Corundum (Ruby) PEI RATING Class 4: Medium commercial applications UNI EN ISO 5. Apatite (Knife Blade) 10. Diamond (Diamond) UNI EN ISO Class 5: All commercial applications/heavy tra c 7 2 *Wear can vary greatly. please consult with a professional. 10545.6 Industry standard <175mm 10545.7
5: Removed after 5 minutes Stain (hot water running) Water 4: Removed by manual cleaning Resistance (weak detergent) Absorption 3: Removed by mechanical cleaning Absorbs 0-.5% Absorbs .5-3% Absorbs 3-7% Absorbs 7% + ASTM C1378-04 (strong detergent) 2: Removed by immersion ASTM C-373 Impervious Vitreous Semi-Vitreous Non-Vitreous UNI EN ISO (24 hrs in suitable solvent) UNI EN ISO Interior/Exterior Interior/Exterior Indoor Use Only Indoor Use Only 10545.14 4 1: Stain not removed 10545.3 Frost Resistant Frost Resistant
Standard Tolerance Result Allowances for: Breaking atness + 5mm + .5% PASS Facial Chemical result Strength Dimension thickness + 6mm + .5% PASS Resistance Industry standard straightness + 4.5mm + .5% PASS Acid PASS should be greater than ASTM C648 ASTM c499-09 squareness + + .6% PASS ASTM C650 Bases PASS 250 lbs 5.4mm UNI EN ISO or UNI EN ISO sides L/W + UNI EN ISO 1.1mm + .5% PASS Chemicals PASS 10545.4 PASS 50 N/MM2 10545.02 + 4.5mm 10545.13
Sustainable Sites Leed Site selection 1 Point Materials & Resources 1 Point 2 Points SS CREDIT 1 M&R CREDIT 2 Information Heat Island E ect-non roof Construction Waste Management: 50% 70% Material with a solar re ectant index of at least 29. Recycling salvaged construction waste in to new reusable materials. Energy & Atmosphere 1 Point M&R CREDIT 4.1-4.2 EA CREDIT 4 Recycled Content: The sum of 10% 20% REQUIREMENTS Green Power: Products that optimize energy post consumer plus 1/2 of the performance for oors and walls using thermal pre consumer reps at least 10-20% Porcelain Stoneware Porcelain FOR COMMERCIAL conductivity. BTU-FT of total value of materials. Type: INTERIORS/NEW Indoor Environmental Quality M&R CREDIT 5 CONSTRUCTION Low-Emitting Materials-Flooring Systems 1 Point Regional Materials: Materials 10% 20% IEQ CREDIT 3.1-7 manufactured within 500 miles Green Cleaning: Reducing occupants exposure of the project site. to hazardous cleaning chemicals. Innovation in Design 1-5 Points IEQ CREDIT 4.1 Low Emitting Adhesives: Products less than ID CREDIT 1 65 G/L VOC Innovation in Design IEQ CREDIT 4.3 Measurable exemplary environmental performance. Product Line: Product Low Emitting Materials: Flooring systems. Sioux The marketing name for this product is property & Stone. marketing The Tile of Cancos This same product may be marketed under di erent names.* under di erent same product This may be marketed *