ARP-Chip Pumping Stations
Total Page:16
File Type:pdf, Size:1020Kb
ARP-Chip Pumping Stations 1 Chip Pumping Station SP 250 Drives and Performance Throughput Up to 250 litres / min Pump Screw-type centrifugal pump 1,5 kW Fitting for pump 2“ Raker Drive Spur wheel back-geared motor 0,15 kW; 57 rpm Dimensions and Weights Overall external dimensions L x W x H 1096 x 1096 x 302 mm Inner tank Ø x H 1020 x 270 mm Maximum capacity of inner tank 200 l Feed height without cutting unit At least 300 mm - Feed opening length x width Variable up to a maximum of 500 x 500 mm Feed height with ZW 400 At least 702 mm + hopper (variable) Feed height with EZ 4 recessed At least 312 mm + Trichter (variable) Feed fl ange DN 100 No. of rakers 4 Net weight Approx. 300 Kg Other Information Cutting units on carriage ZW 300, ZW 400, EZ 4 Integrable cutting units ZW 300 Level measurement „Pump On-Off“ With ultrasonic sensor Level measurement „WHG-Overfull“ With fl uid level limit switch 2 Chip Pumping Station SP 500 Drives and Performance Throughput Up to 500 litres / min Pump Screw-type centrifugal pump 4,0 kW Fitting for pump 2“ Raker Drive Spur wheel back-geared motor 0,15 kW; 57 rpm Dimensions and Weights Overall external dimensions L x W x H 1436 x 1531 x 301 mm Inner tank Ø x H 1020 x 270 mm Maximum capacity of inner tank 350 l Feed height without cutting unit At least 300 mm - Feed opening length x width Variable up to a maximum of 500 x 500 mm Feed height with ZW 400 At least 702 mm + hopper (variable) Feed height with EZ 4 recessed At least 312 mm + Trichter (variable) Feed fl ange DN 100 No. of rakers 4 Net weight Approx. 450 Kg Other Information Cutting units on carriage ZW 300, ZW 400, EZ 4 Integrable cutting units ZW 300, ZW 400, EZ 4 Level measurement „Pump On-Off“ With ultrasonic sensor Level measurement „WHG-Overfull“ With fl uid level limit switch 3 Chip Pumping Station SP 1000 Drives and Performance Throughput Up to 1000 litres / min Pump Screw-type centrifugal pump 5,5 kW Fitting for pump 3“ Raker Drive Spur wheel back-geared motor 0,15 kW; 57 rpm Dimensions and Weights Overall external dimensions L x W x H 1440 x 1440 x 625 mm Inner tank Ø x H 1346 x 545 mm Maximum capacity of inner tank 750 l Feed height without cutting unit At least 650 mm - Feed opening length x width Variable up to a maximum of 500 x 500 mm Feed height with ZW 400 At least 1000 mm + hopper (variable) Feed height with EZ 4 recessed At least 650 mm + Trichter (variable) Feed fl ange 300 x 300 mm No. of rakers 4 Net weight Approx. 600 Kg Other Information Cutting units on carriage ZW 300, ZW 400, EZ 4 Integrable cutting units ZW 300, ZW 400, EZ 4 Level measurement „Pump On-Off“ With ultrasonic sensor Level measurement „WHG-Overfull“ With fl uid level limit switch 4 Chip Pumping Station SPF 500 Drives and Performance Throughput Up to 500 litres / min Pump Screw-type centrifugal pump 1,5 kW Screw conveyor Screw gear motor 0,25 kW; 4,2 rpm Dimensions and Weights Overall external dimensions L x W x H 1850 x 840 x 900 mm External dimensions of tank LxWxH 1360 x 800 x 560 mm Maximum capacity with cutting unit 350 l Feed height with ZW 400 At least 650 mm -Feed opening ZW 400 w. cutter cov. L x W Max. 330 x 400 mm Feed fl ange DN 125 Diameter of screw conveyor 185 mm Weight without cutting unit Approx. 250 Kg Other Information Integrable cutting units EZ 4 , ZW 300, ZW 400 Level measurement „Pump On-Off“ With ultrasonic sensor Level measurement „WHG-Overfull“ With fl uid level limit switch 5 Chip Pumping Station SPF 1000 Drives and Performance Throughput Up to 1000 litres / min Pump Screw-type centrifugal pump 5,5 kW Screw conveyor Screw gear motor 0,25 kW; 4,2 rpm Dimensions and Weights Overall external dimensions L x W x H 2200 x 1050 x 1175 mm External dimensions of tank LxWxH 1600 x 1000 x 800 mm Maximum capacity with cutting unit 700 l Feed height with EZ 4 At least 800 mm -Feed opening EZ 4, L x W Max. 330 x 320 mm Diameter of screw conveyor 185 mm Weight without cutting unit Approx. 450 Kg Other Information Integrable cutting units EZ 4 , ZW 300, ZW 400 Level measurement „Pump On-Off“ With ultrasonic sensor Level measurement „WHG-Overfull“ With fl uid level limit switch 6 Chip Pumping Station SPFEZ Drives and Performance Throughput Up to 250 litres / min Pump Screw-type centrifugal pump 1,5 kW Screw conveyor Screw gear motor 0,12 kW; 9,6 rpm Scraper conveyor Screw gear motor 0,18 kW; 4,3 rpm Cutting unit EZ 4 Bevel gear motor 2,2 kW; 18 rpm * Dependent on the tank size, pipe length, pump head feed, etc. Dimensions and Weights Overall external dimensions L x W x H Variable x 1510 x 1185 mm External dimensions of tank LxWxH Variable x max. 600 x min. 250 mm Feed height Min. 250 mm Feed opening length - width L: Variable W: up to a maximum of 500 mm Diameter of screw conveyor 90 mm Weight Dependent on the length and width Other Information Integrable cutting units EZ 4 Level measurement „Pump On-Off“ With ultrasonic sensor Level measurement „WHG-Overfull“ With fl uid level limit switch 7 Extract from our reference list: AAG Austria Alu-Guß Ges. m.b.H IBT GmbH Adam Opel AG IMS Gear Automotive Airbus Deutschland GmbH Konzelmann GmbH Alutec Metallwaren GmbH & Co. Kronprinz Aluguß GmbH Audi AG Lupold Hydrotechnik GmbH BBS Kraftfahrzeugtechnik AG MTU Friedrichshafen GmbH BMW AG Rhode & Schwarz Borbet Ronal Bosch Rexroth - Brüninghaus Sihn Car Image Co. Ltd SRF Daimler Chrysler AG VW AG Gero GmbH Weiss General Motors Weisser St. Georgen Handtmann GmbH & Co.KG ZF AG ARP GmbH & Co. KG Industriestraße 37 D - 72275 Alpirsbach-Peterzell Tel.: 07444 / 95150 Fax: 07444 / 951560 www.arp-mb.de 8.