MESSAGE FROM ORGANIZERS VIETNAM - JAPAN Supporting Industries Exhibition

Vietnam – Japan relationship has reached great achievements in terms of FDI. In first half of 2017, Japan ranks first among the countries and regions that have the largest registered investment capital in Vietnam. As of 20th June 2017, number of projects from Japan investing into Vietnam was 3,443 with total of registered investment capital was over USD 46.2 billion. A large number of Japanese companies, when being asked by the survey conducted by JETRO out of last year replied that they wanted to expand their production in Vietnam. Vietnam has been still evaluated as a significant production base and an attractive market by Japanese investors so far.

On the other hands, according to JETRO’s survey on Japanese-affiliated companies in Asia and Oceania in 2016, the procurement rate of raw materials and parts, components by Japanese companies in Vietnam was only 34.2%. It was not so high in comparison with this figure in other neighboring countries such as, 40.5% in Indonesia, 57.1% in Thailand and 67.8% in China.

Therefore, JETRO and VIETRADE as the role of Governmental trade promotion agencies have cooperated to continuously organize “the 7th Vietnam-Japan Exhibition on Supporting Industries in Hanoi – so called SIE 2017”. The exhibition is offering a place for 40 Japanese exhibitors (as BUYERs) to show parts and components they expect to purchase in Vietnam and 40 Vietnamese exhibitors (as SELLERs) to exhibit their produced accessories and production capabilities to Japanese companies.

SIE 2017 is held under the framework of Vietnam-Japan Economic Partnership Agreement (VJEPA), which was signed by the two Governments in December 2008 and took effect from 1st October 2009. It was also one of the themes of the Vietnam – Japan Joint Initiative of phase 3.

This year, SIE 2017 is also co-located with other 2 industrial specialized exhibitions; “NEPCON VIETNAM 2017 ” and “Industrial Components and Sub-contracting Vietnam 2017” by Reed Tradex Co., Ltd.

We are sure that the combination of these shows will make great effect for both exhibitors and visitors and being expected to create good business opportunities for all the concerned parties.

Also we expect all exhibitors and visitors to take full advantage of this event for networking.

September 2017

VIETNAM - JAPAN - Supporting Industries Exhibition 3 CULTURAL PALACE FLOOR PLAN

4 INFORMATION VENUE LAYOUT OF 3 EXHIBITIONS

VN33 VN34 VN35 VN36 VN37 VN38 VN39 VN40 VN41 M08 M09 M11 M12 M13 M15 VAN VIET VIET VIET VIET YAMA THUAN (CHIP CHOICE MTR CSC VN-J COMPETENCE VIET HA OSAKA KOBELCO Reed XUAN AN AU UC GUCHI THANH MALL) PRO ROGERS Tradex TECHNOLOGY CESCO STAFF ROOM

HAND SOLDERING VN32 VN27 VN22 VN15 VN10 VN07 VN04 VN02 E25 E26 F25 F26 G25 G26 COMPETITION THINH SMART MANU- GAI PHONG ECO 3H AIDA PT (SUZHOU JICA IDMEA BAC VIET KING SKY AERCHS HUNG VIETNAM TRONICS RUBBER VIETNAM PLASTICS COM SOLDER JUJIE) -PAI JP40 VN31 VN26 VN21 VN09 VN06 VN03 VN01 E23 E24 F23 F24 G23 G24 Y.H. MANH VAN AN PHU 3C GAOQIANG I26I25 L14 TECHNO- SHENGLI FOSHAN SPSEMI ZING EAR (JIAHE)SEBONG SEIKO KOM QUANG LONG VIET ENGINEERING YOUCE TOP (YONG DYNAMIC JP39 VN30 VN25 VN20 VN14 VN08 VN05 E19a E21 E22 F21 F22 G21 G22 MTSC VINA TAIYO TAN ICHI BINH TONG XUYEN MING) I24 SEIKICO KYODAI ECOTEK HONG FA YIK SEPNA TAIHENG (KLD) (RAYON SPRING PHAT VIETNAM MINH YANG SHING CO INDUSTRIAL) JP38 VN29 VN24 VN19 VN13 TSUCHIYA T&C SEIKI KIM SEN HUNG WES SZ KOREA VIETNAM INNOVATIONS DUNG PAVILION L11 JP37 VN28 VN23 VN18 D19 E19 E20 F19 F20 G19 H19 H20 I19 TECHNO PHAN LE KIM SUNPLA PANWORLD NOVA CHENG YOU WEIDY UNICOMP UNILAM TAIYO BAO LONG KANETSU MORNSUN DONG -SAN NTW JP36 VN17 VN12 G18 I18I15 HANOI D17 D18 E17 E18 F17 F18 G17 H15 TAMRON JAT TEEIA LION INDUSTRY ENTERPRISES BUSINESS HOT MAGIC KHJ. SINIC L10 T&I YOUTE LINTEC DONG IL BOSUN JP35 MATCHING AREA VN16 VN11 D15 D16 TECH RAY TECHNOLOGY -TEK YUHAO SUS VN HAI GENG TAICO INNOTEK PHUONG CARTELL L09 JP34 TAIWAN PAVILION VST SSK JETRO BY TEEIA GERI PAVILION JP29 JP22 JP15 JP08 H13 I13 I14 JP33 D13 D14 E13 F11 F12 G13 G14 L07 TIGER TOYOTA FOSTER DENSO EVERWIDE PROCHEM APPLIED JANG SHIOGAI PLASMA WONTECH HIBEX DNIV SYSTECH LORIOT SATO JP28 JP21 JP14 JP07 D11 G11 G12 WURTH TRUMPF JP32 NODA ENSHU TOP RK ITSUWA HAMADEN - TEEMA KNL SANKO RUN L05 ENGINEERING - JUNG SHING CEIEC JP27 JP20 JP13 WIRE E09 E10 F09 F10 G09 G10 H09 I09 I10 JP31 MINATO - YUNG CHAN IHI CURIOUS (SELEN)(WILLDONE) (HIGH (SK) DKT UBTECK UST POLAR PREC RUBBER METAL FIVE) - LIPER SIP L04 JP26 JP19 JP12 JP06 E07 E08 F07 F08 G07 G08 I08I07 JP30 MARU CHUUBU AZUMA ENTERPRISE XT XING HOKURIKU (AINUO) (AP (TIANLI) SINMANT ONE PROTEM ELEMENT AEIS PANASONIC JYU KOUGYOU NEJI SOFTDIGM ELECTRONICS) L03 JP25 JP18 JP11 JP05 D01 H03 I06I05 E03 E02 F05 F06 G01 D SQUARED KTC HIROYUKI BEST AMON - YUNPEN (YOUCHANG) VINAPHAM FLEXITECH PCB HEILIND PLANT ELECTRONIC L02 JP24 JP17 JP10 - MING CHIANG E01 F01 TECHVALLEY I03 KOM HASHIMA BANDO ENTERPRISE FUJI JETRO - TAI-TECH JUKI SECRETARIAT ADVANCED WIT WKK L01 JP23 JP16 JP09 JP04 SINFONIA ROOM BROTHER ELECTRONICS CREATIVE NIDEC- HONDA CANON READ INDUSTRIES - K.S. TERMINALS ENGINEERING TAIWAN PAVILION BY TEEMA JAPAN PAVILION SINGAPORE PAVILION K08 K08a K08b K09 K10 BY AEIS JETRO JP03 JP02 JP01 K05 K06 K07 K12 AI- ADVANEX(XING (NEO R/S-VN KNK HEXAGON CEN DOU YEE INFO DAIKIN KYORITSU INFANTRON PHONE CHEN) DEN) TECH

ENTRANCE EXIT

lockable 2 Pcs Lockable 1 Pcs P01 P02 P03 P04 SERVER ROOM CLEANERA GA ROOM COM Printer Printer Printer Printer MEETING ROOM Group VIP VIP Pre C02 C04 C06 C08 (XULE) (DONGLI) (R/S KS) REGISTRATION AREA C01 C03 C05 C07 WALK IN - Self Registration 8 Set RIVER SHENMAO STAGE STONE MAIN Form Filling Counter SEONGNAM CITY ENTRANCE B04 B06 B08 B10 B12 B14 VIP LOUNGE Form Filling Counter Self Pre-regis B01 B02 B03 B05 B07 B09 B11 B13 PRESS ROOM

THAILAND PAVILION BUSINESS A01 A03 A04 A05 A06 A07 A08 A09 A11 OKUNO (CHENGDU) LOUNGE R/S-KP PAS AUROMEX S.E.C WIREFORM DAIICHI

EMERGENCY EXIT

As of: August, 2017

VIETNAM - JAPAN - Supporting Industries Exhibition 5 VIETNAM - JAPAN - SUPPORTING INDUSTRIES EXHIBITION BOOTH LAYOUT

Viet Van Xuan Viet An Viet Au Competence Viet Ha Viet Uc VN - J Yamaguchi Thuan Technology Thanh VIETNAMESE COMPANIES

Thinh Smart Manu- IDMEA Giai Phong Eco Bac Viet 3H Hung Viet Nam tronics Rubber Viet Nam Plastics

Manh Foshan 3C Y.H. Techno- Shengli Van Long An Phu Quang Engineering SEIKO kom Plastic Viet

VINA Ichi Ecotek Binh Minh TAIYO Tan Phat Seikiko Kyodai SPRING Viet Nam

T & C Seiki Kim Sen TSUCHIYA Hung Dung Viet Nam Innovations

TECHNO Sunpla Phan Le Kim Long TAIYO Bao

Hanoi TAMRON JAT Industry T & I

TAICO INNOTEK Hai Phuong

SSK JAPANESE COMPANIES

TIGER TOYOTA FOSTER DENSO SHIOGAI

RK NODA ITSUWA ENSHU HAMADEN ENGINEERING SANKO

PREC MINATO IHI CURIOUS RUBBER

PANASONIC MARUJYU HOKURIKU CHUUBU AZUMANEJI KOUGYOU

KTCKHIROYUKI TC AMON

KOM HASHIMA BANDO

NIDEC HONDA BROTHER CANON -READ MACHINERY

DAIKIN AIPHONE ADVANEX

6 INFORMATION EXHIBITORS LIST JAPANESE COMPANY VIETNAMESE COMPANY

Booth No Company Name Page Booth No Company Name Page

JP 01 ADVANEX (VIETNAM)., LTD 12 VN 01 3C ENGINEERING 32

JP 02 AIPHONE COMMUNICATIONS (VIETNAM) CO., LTD 12 VN 02 3H PLASTICS JSC 32

JP 05 AMON INDUSTRY CO., LTD 14 VN 03 AN PHU VIET PLASTICS CO., LTD 33

JP 06 AZUMANEJI CO., LTD 14 VN 04 BAC VIET TECHNOLOGY JSC 33

JP 10 BANDO MANUFACTURING (VIETNAM) CO., LTD 16 VN 05 BINH MINH TMC CO., LTD 34

JP 11 BESTPLANT CO., LTD 17 VN 07 ECO VIET NAM CO., LTD 35

JP 09 BROTHER MACHINERY VIETNAM CO., LTD 16 VN 08 ECOTEK CO., LTD 35

JP 04 CANON VIETNAM CO., LTD 13 VN 09 FOSHAN CERAMIC MACHINERY AND MOLD., JSC 36

JP 12 CHUUBU KOUGYOU VIETNAM CO., LTD 17 VN 10 GIAI PHONG RUBBER CO., LTD 36

JP 13 CURIOUS SEIKI VIETNAM CO., LTD 18 VN 11 HAI PHUONG CO., LTD 37

JP 03 DAIKIN AIR CONDITIONING (VIETNAM)., JSC 13 VN 12 HA NOI INDUSTRY TRADING INVESTMENT., JSC 37

JP 08 DENSO MANUFACTURING VIETNAM CO., LTD 15 VN 13 HUNG DUNG CO., LTD 38

JP 14 ENSHU SANKO VIETNAM CO., LTD 18 VN 14 ICHI VIETNAM SUPPORTING INDUSTRY., JSC 38

JP 15 FOSTER ELECTRIC(BAC NINH) CO., LTD 19 VN 15 INDUSTRIAL MECHANICS AND AUTOMATION CO., LTD 39

JP 07 HAMADEN VIETNAM CO., LTD 15 VN 16 INNOTEK JSC 39 JAT AUTOPARTS AND INDUSTRY EQUIPMENTS JP 17 HASHIMA VIETNAM CO., LTD 20 VN 17 PRODUCTION., JSC 40

JP 18 HIROYUKI VIETNAM CO., LTD 20 VN 18 KIM LONG PRODUCTION AND TRADING SERVICE CO., LTD 40

JP 19 HOKURIKU MACHINERY CLUB., JSC 21 VN 19 KIM SEN INDUSTRIAL., JSC 41

JP 16 HONDA VIETNAM COMPANY 19 VN 20 KYODAI MANUFACTURE., JSC 41

JP 20 IHI CORPORATION 21 VN 21 MANH QUANG CO., LTD 42

JP 21 ITSUWA VIETNAM CO., LTD 22 VN 22 MANUTRONICS VIETNAM., JSC 42

JP 24 KOM VIETNAM CO., LTD 23 VN 23 PHAN LE BAO VIETNAM TECHNOLOGY CO., LTD 43

JP 25 KTC (HANOI) CO., LTD 24 VN 24 SEIKI INNOVATIONS VIETNAM CO., LTD 43

JP 26 MARUJYU VIETNAM CO., LTD 24 VN 25 SEIKICO PRECISION MECHANICAL CO., LTD 44

JP 27 MINATO RUBBER VIETNAM CO., LTD 25 VN 26 SHENGLI VN CO., LTD 44

JP 23 NIDEC-READ CORPORATION 23 VN 27 SMART VIETNAM PRECISION MECHANICAL., JSC 45

JP 28 NODA VIETNAM CO., LTD 25 VN 28 SUNPLA., JSC 45

JP 30 PANASONIC VIETNAM CO., LTD 26 VN 29 T & C VIETNAM CO., LTD 46

JP 31 PREC VN CO., LTD 27 VN 30 TAN PHAT AUTOMATION., JSC 46

JP 32 RK ENGINEERING CO., LTD 27 VN 31 TECHNOKOM., JSC 47

JP 33 SHIOGAI SEIKI VIETNAM CO., LTD 28 VN 32 THINH HUNG CASTING CO., LTD 47

JP 34 SSK (VIET NAM) CO., LTD 28 VN 41 THUAN THANH ENVIRONMENT., JSC 52

JP 35 TAICO VIETNAM CO., LTD 29 VN 06 VAN LONG PLASTIC CO., LTD 34

JP 36 TAMRON OPTICAL(VIETNAM) CO., LTD 29 VN 33 VAN XUAN CO., LTD 48

JP 37 TECHNOTAIYO VIET NAM CO., LTD 30 VN 34 VIET AN., JSC 48

JP 29 TIGER VIETNAM CO., LTD 26 VN 35 VIET AU ENGINEERING., JSC 49

JP 22 TOYOTA MOTOR VIET NAM CO., LTD 22 VN 36 VIET COMPETENCE TECHNOLOGY., JSC 49

JP 38 TSUCHIYA TRADING VIETNAM CO., LTD 30 VN 37 VIET HA CO., LTD 50

JP 39 VINA TAIYO SPRING CO., LTD 31 VN 38 VIET UC INDUSTRIAL & COMMERCIAL., JSC 50

JP 40 Y.H SEIKO VIETNAM., JSC 31 VN 39 VN-J PRECISION MECHANICS CORPORATION 51

VN 40 YAMAGUCHI VIETNAM., JSC 51 ORGANIZATION

Organization Page VIETNAM TRADE PROMOTION AGENCY (VIETRADE ) 53

JAPAN INTERNATIONAL COOPERATION AGENCY (JICA ) 53 JAPAN EXTERNAL TRADE ORGANIZATION (JETRO ) 54

VIETNAM - JAPAN - Supporting Industries Exhibition 7 Others

Packing Materials / Secondary Materials

Jig / Equipment

Materials (Others)

Materials (Plastic, Rubber)

Materials (Metal)

Construction Equipment (Construction Materials, electric cables, doors, windows…)

Plant Equipment (For Ship plant / Power plant / Large-scale plant)

Industrial Goods (Industrial machine / conveyance equipment)

Assembling (Others)

Assembling (Home electronics)

Assembling (Office Automation Equipment)

Assembling (4 wheels / 2 wheels)

Electronic/ Electrical Components/ Electric Control

Heat Treatment

Surface Treatment (electroplating, coating)

Forging

Casting

Canning / Welding

Sheet Metal (Precise)

Sheet Metal (Ordinary)

Machining (Precise)

Machining (Ordinary)

Rubber Injection Molding

Rubber Molding

Plastic Injection Molding

Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)

Stamping Dies

Press CATEGORY FOR PURCHASING ITEMS FOR CATEGORY 21 22 12 12 14 14 17 16 13 17 18 13 15 18 19 15 20 20 21 19 16 Page AIPHONE COMMUNICATIONS AIPHONE COMMUNICATIONS LTD (VIETNAM) CO., COMPANY NAME COMPANY (VIETNAM) BANDO MANUFACTURING LTD CO., LTD VIETNAM CO., MACHINERY BROTHER LTD VIETNAM CO., CHUUBU KOUGYOU LTD SEIKI VIETNAM CO., CURIOUS (VIETNAM)., JSC AIR CONDITIONING DAIKIN VIETNAM DENSO MANUFACTURING LTD CO., LTD VIETNAM CO., ENSHU SANKO LTD NINH) CO., (BAC ELECTRIC FOSTER LTD HAMADEN VIETNAM CO., LTD HASHIMA VIETNAM CO., LTD VIETNAM CO., HIROYUKI JSC CLUB., MACHINERY HOKURIKU VIETNAM COMPANY HONDA LTD VIETNAM CO., ITSUWA No. JP 01JP 02 (VIETNAM) LTD ADVANEX JP 05 LTD CO., JP 06 AMON INDUSTRY LTD CO., AZUMANEJI JP 10 JP 11 LTD CO., BESTPLANT JP 09 JP 04JP 12 LTD CANON VIETNAM CO., JP 13 JP 03 JP 08 JP 14 JP 15 JP 07 JP 17 JP 18 JP 19 JP 16 JP 20 IHI CORPORATION JP 21 JAPANESE COMPANY JAPANESE Booth

8 INFORMATION Others

Packing Materials / Secondary Materials

Jig / Equipment

Materials (Others)

Materials (Plastic, Rubber)

Materials (Metal)

Construction Equipment (Construction Materials, electric cables, doors, windows…)

Plant Equipment (For Ship plant / Power plant / Large-scale plant)

Industrial Goods (Industrial machine / conveyance equipment)

Assembling (Others)

Assembling (Home electronics)

Assembling (Office Automation Equipment)

Assembling (4 wheels / 2 wheels)

Electronic/ Electrical Components/ Electric Control

Heat Treatment

Surface Treatment (electroplating, coating)

Forging

Casting

Canning / Welding

Sheet Metal (Precise)

Sheet Metal (Ordinary)

Machining (Precise)

Machining (Ordinary)

Rubber Injection Molding

Rubber Molding

Plastic Injection Molding

Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)

Stamping Dies

Press 23 24 24 25 23 25 26 27 27 28 28 29 29 30 26 22 30 31 31 Page COMPANY NAME COMPANY LTD VIETNAM CO., KOM LTD (HANOI) CO., KTC LTD VIETNAM CO., MARUJYU LTD RUBBER VIETNAM CO., MINATO CORPORATION NIDEC-READ LTD VIETNAM CO., NODA LTD VIETNAM CO., PANASONIC LTD PREC VN CO., LTD RK ENGINEERING CO., LTD SEIKI VIETNAM CO., SHIOGAI LTD (VIET NAM) CO., SSK LTD VIETNAM CO., TAICO LTD OPTICAL(VIETNAM)CO., TAMRON LTD VIET NAM CO., TECHNOTAIYO LTD TIGER VIETNAM CO., LTD VIET NAM CO., MOTOR TOYOTA LTD VIETNAM CO., TRADING TSUCHIYA LTD SPRING CO., VINA TAIYO VIETNAM., JSC SEIKO Y.H No. JP 24 JP 25 JP 26 JP 27 JP 23 JP 28 JP 30 JP 31 JP 32 JP 33 JP 34 JP 35 JP 36 JP 37 JP 29 JP 22 JP 38 JP 39 JP 40 Booth

VIETNAM - JAPAN - Supporting Industries Exhibition 9 Others

Packing Materials / Secondary Materials

Jig / Equipment

Materials (Others)

Materials (Plastic, Rubber)

Materials (Metal)

Construction Equipment (Construction Materials, electric cables, doors, windows…)

Plant Equipment (For Ship plant / Power plant / Large-scale plant)

Industrial Goods (Industrial machine / conveyance equipment)

Assembling (Others)

Assembling (Home electronics)

Assembling (Office Automation Equipment)

Assembling (4 wheels / 2 wheels)

Electronic/ Electrical Components/ Electric Control

Heat Treatment

Surface Treatment (electroplating, coating)

Forging

Casting

Canning / Welding

Sheet Metal (Precise)

Sheet Metal (Ordinary)

Machining (Precise)

Machining (Ordinary)

Rubber Injection Molding

Rubber Molding

Plastic Injection Molding

Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)

Stamping Dies

Press CATEGORY FOR SELLING ITEMS FOR CATEGORY 32 32 33 33 34 35 35 36 36 37 37 38 38 39 39 40 40 41 41 42 42 Page COMPANY NAME COMPANY 3C ENGINEERING JSC 3H PLASTICS., CO.,LTD AN PHU VIET PLASTICS JSC VIET TECHNOLOGY BAC LTD BINH MINH TMC CO., LTD VIET NAM CO., ECO LTD CO., ECOTEK AND MACHINERY CERAMIC FOSHAN MOLD., JSC LTD GIAI PHONG RUBBER CO., LTD HAI PHUONG CO., INVESTMENT TRADING HA NOI INDUSTRY JSC LTD HUNG DUNG CO., ICHI VIETNAM SUPPORTING JSC INDUSTRY., AND MECHANICS INDUSTRIAL LTD) (IDMEA CO., LTD CO., AUTOMATION JSC INNOTEK., AND INDUSTRY AUTOPARTS JAT JSC PRODUCTION., EQUIPMENTS AND PRODUCTION KIM LONG LTD CO., SERVICE TRADING JSC KIM SEN INDUSTRIAL., JSC MANUFACTURE., KYODAI LTD CO., MANH QUANG VIETNAM., JSC MANUTRONICS No. VN 01 VN 02 VN 03 VN 04 VN 05 VN 07 VN 08 VN 09 VN 10 VN 11 VN 12 VN 13 VN 14 VN 15 VN 16 VN 17 VN 18 VN 19 VN 20 VN 21 VN 22 VIETNAMESE COMPANY Booth

10 INFORMATION Others

Packing Materials / Secondary Materials

Jig / Equipment

Materials (Others)

Materials (Plastic, Rubber)

Materials (Metal)

Construction Equipment (Construction Materials, electric cables, doors, windows…)

Plant Equipment (For Ship plant / Power plant / Large-scale plant)

Industrial Goods (Industrial machine / conveyance equipment)

Assembling (Others)

Assembling (Home electronics)

Assembling (Office Automation Equipment)

Assembling (4 wheels / 2 wheels)

Electronic/ Electrical Components/ Electric Control

Heat Treatment

Surface Treatment (electroplating, coating)

Forging

Casting

Canning / Welding

Sheet Metal (Precise)

Sheet Metal (Ordinary)

Machining (Precise)

Machining (Ordinary)

Rubber Injection Molding

Rubber Molding

Plastic Injection Molding

Plastic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion)

Stamping Dies

Press 43 43 44 44 45 45 46 46 47 47 52 34 48 48 49 49 50 50 51 51 Page COMPANY NAME COMPANY VIETNAM TECHNOLOGY PHAN LE BAO LTD CO., LTD VIETNAM CO., SEIKI INNOVATIONS PRECISION MECHANICAL SEIKICO LTD CO., LTD SHENGLI VN CO., VIETNAM PRECISION SMART MECHANICAL., JSC SUNPLA., JSC LTD T & C VIETNAM CO., JSC AUTOMATION., PHAT TAN JSC TECHNOKOM., LTD CO., THINH HUNG CASTING JSC THANH ENVIRONMENT., THUAN LTD CO., PLASTIC LONG VAN LTD CO., XUAN VAN VIET AN., JSC ENGINEERING., JSC VIET AU JSC TECHNOLOGY., VIET COMPETENCE LTD VIET HA CO., VIET UC INDUSTRIAL JSC & COMMERCIAL., VN-J PRECISION MECHANICS CORPORATION VIETNAM., JSC YAMAGUCHI No. VN 23 VN 24 VN 25 VN 26 VN 27 VN 28 VN 29 VN 30 VN 31 VN 32 VN 41 VN 06 VN 33 VN 34 VN 35 VN 36 VN 37 VN 38 VN 39 VN 40 Booth

VIETNAM - JAPAN - Supporting Industries Exhibition 11 N/A N/A N/A N/A Die cut parts Assembly on product N/A Insulator, cover, LCD Net Rubber, harness, power Wire Coil cord cable, Assembly on product N/A N/A ECM Speaker, Assembly on product N/A N/A Transformer Assembly on product PCB Assembly on product Zn plating - Wire Spring Wire Zn plating - Automotive 10,000 SWP SWC; - Wire plating Nikel spring, flat spring Automation; Office medical 10,000 SWP SWC; treatment Surface ( EDP) Automotive 5,000 SWP SWC; stamping for Material part Automotive…. OA; 100 Kg SPCD… SPCC; SUS; Assembly part others OA; 10,000 , Plastic… Metal Product name: Product for: Use Minimum lot: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING Purchasing Senior Manager Purchasing Mr. KEI NAKASHIMA Mr. +84-27-4362-8031 +84-27-4362-8034 [email protected] http://www.aiphone.net 2007 250 14,700 18,080,000 23,248,880 Others Aiphone Japan ISO 9001 : 2015 General Manager General Phu Ward, 6, VISP II, Hoa 25, Street No. Thu Dau Mot, Binh Duong Province Phu Ward, 6, VISP II, Hoa 25, Street No. Thu Dau Mot, Binh Duong Province Mr. TRAN DUC KIEN TRAN Mr. +84-220-354-5075 +84-220-354-5076 [email protected] www.advanex.com.vn 2006 90 F3, Phuc Dien IZ, Cam Giang Lot Vietnam District, Privince, Hai Duong 3,600 1,830,000 N/A Spring, Flat Spring,,, Wire Precision NIDEC… CANON; DENSO;KYOCERA; ISO 9001; ISO 14001 F3,Phuc Dien IZ, Cam Giang Lot Vietnam District, Hai Duong Province, Aiphone was established in 1948, and has been established Aiphone was century. a half for intercoms improving to devoted have we technology and security The communication to continues than 60 years more for been cultivating of fields, in a variety used in many and is now expand, facilities care such as the home, hospitals, settings, and offices. Advanex (Vietnam) Ltd. (formerly known as Kato Kato as known (formerly Ltd. (Vietnam) Advanex INC of Advanex a members Ltd). Spring Vietnam as a manufacture in Vietnam operation ;started Japan part flat spring and stamping spring, coil of precision in engaged is also company .The 2017) year the (by in leader market is the the company sub-assembly. in Vietnam. component the supply of presicion

AIPHONE COMMUNICATIONS (VIETNAM) CO., LTD (VIETNAM) CO., AIPHONE COMMUNICATIONS ADVANEX (VIETNAM) LTD (VIETNAM) ADVANEX FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY TEL: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY TEL: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY JAPANESE COMPANY JAPANESE 12 JP 01 JP VIETNAM - JAPAN - Supporting industries exhibition JP 02 VIETNAM - JAPAN - Supporting industries exhibition 13 JP 04 JP 03 JP PWB N/A N/A 1/ 2/ 4 layers N/A N/A & Design Die maker injection machine - 650T 30T size: N/A N/A Injection mold 200T - Machine size 650T N/A POM/ ABS/ PSHI/ PS/ PPE+PS PBT/ Manual Packing N/A 50- woodfree Paper 60/ 80/ 100/ 150 gsm box Carton Packing N/A with 3-4 layer 4-6 color corrugating Carton N/A N/A Copper Assy Copper Assy N/A N/A Foam Foam N/A N/A Material Sealing Material Sealing N/A N/A Injection Part Injection Part Carton JAPANESE COMPANY JAPANESE Material: Material: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING Assistant Manager Assistant Mr. YOICHI KOSHIGUCHI YOICHI Mr. +84-24-3881-2111 +84-24-3881-1783 [email protected] 2001 23,200 End users ISO 9001 www.canon-vn.com.vn General Manager General Dong A-1, Thanglong Industrial Park, Anh Dist., Hanoi, Vietnam 600,000 306,700,000 19,000,000 Automation Assembling (Office Equipment) Kim Industrial Park, A-1, Thang Long Chuang Commune, Dong Anh Dist., Hanoi, Vietnam Mr. WADA MAMORU WADA Mr. +84-22-1358-9250 N/A [email protected] 1995 600 Park, II Industrial Plot Q1, Thang Long My Hao Phung Chi Kien Commune, Province District, Hung Yen 220,000 82,500,000 N/A Assembling (Others) N/A Plan in 2018 II Industrial Park, Plot Q1, Thang Long Phung Chi Kien Commune, My Hao Province District, Hung Yen www.daikin.com.vn Canon Vietnam Co., Ltd. is 100% Japanese capital capital is 100% Japanese Ltd. Co., Canon Vietnam and printer specializing in scanner company, purpose of brining customers With the production. as completing as well products, competitive more in government with Vietnam our commitment making are we supporting industry contribution, parts made purchasing expand to efforts continuous in Vietnam. Daikin Air Conditioning Vietnam was established in established was Vietnam Daikin Air Conditioning air conditioning in distributing 1995, specializing in 2016, built was Daikin factory products. and assembling air in manufacturing specializing 500 in Top listed was Daikin Vietnam conditions. Trusted 100 Top and Enterprises Vietnamese Largest Times and Economy Vietnam by ranked Brand in 2013. Consumer Magazine

CANON VIETNAM CO.,LTD DAIKIN AIR CONDITIONING (VIETNAM) JSC (VIETNAM) CONDITIONING AIR DAIKIN TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY Screw Parts Screw Automobiles 10,000 SWCH10R Brackets Shelves 5,000 SPHC Parts Fastening Chairs 3,000 SUS304 Bookend Shelves 3,000 SWA Springs Chairs 6,000 SWOSC-V Plastic convex mirror Plastic convex check around Safety lot the parking 1,000 Plastic(acrylic) tool Car maintenance of Changing Tire and automobile motorcycle 1,000 (45C) steel Carbon tool car harness for Audio the car change To audio unit 500 tool Car maintenance Changing Plug of and automobile motorcycle 1,000 S45C,STKM13A,SS41B-D Spot light in the Lighting tree of and the walls garden the house 300 Alminium Material: Material: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING General Manager General JAPAN Tokyo, Sumida-ku, 2-10-1 Ishiwara, +81-3-3624-7447 +81-3-3624-7470 [email protected] http://www.azumaneji.co.jp/ 1961 30 Automobiles, Furniture, Office Constructions ISO 9001 / 14001 ATSUMI MAKOTO Mr. 2-10-1 Ishiwara, Sumida-ku, Tokyo, JAPAN Tokyo, Sumida-ku, 2-10-1 Ishiwara, 1,000 12,500 10,000,000 (Ordinary), Press,Machining Treatment Casting,Forging,Surface coating) (electroplating, General manager / Staff manager General Fukusaki-town, 2077-1, Minaminawara, JAPAN Hyogo-Pref, Kanzaki-Dist, +81-07-9022-6555 +81-07-9022-2715 [email protected] www.amon.co.jp/ 1964 109 N/A N/A 830,000 30,000,000 / Packing Plastic Molding / Press Materials JAPAN in center,etc shop,home Car goods ISO 9001:2008 OSAKI HIROFUMI Mr. ATSUSHI TAKAHASHI Mr. We are engaged in three lines of business related lines of business related in three engaged We are or special sell general is to The first parts. metal to parts whole metal produce is to The second fasteners. is to The third partners. with domestic and foreign on tightening data with practical customers provide experiments. from derived Founded in 1964, we specialize in supplying the car the car in supplying specialize in 1964, we Founded and has 6,000 selling customers Japanese for goods cooperating We are in the Japan. at stores areas having inspection factory and factories, with many other with cooperate to planing also are China.We in inspection factory. up our and set in Vietnam factories future. in near cooperation your to forward Look

AMON INDUSTRY CO.,LTD INDUSTRY AMON AZUMANEJI CO., LTD CO., AZUMANEJI FAX: EMAIL: WEBSITE: PERSON IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY COMPANY PROFILE COMPANY FAX: EMAIL: WEBSITE: PERSON IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY COMPANY PROFILE COMPANY JAPANESE COMPANY JAPANESE 14 JP 05 JP VIETNAM - JAPAN - Supporting industries exhibition JP 06 VIETNAM - JAPAN - Supporting industries exhibition 15 JP 08 JP 07 JP Gear VIC 180,000 N/A Stopper, Ring Stopper, O2 Sensor 220,000 CPS SUS631 Nozzle Gasoline Valve 15,000 N/A Bracket Control Oil Valve 50,000 SPCC Plug Module AT 600,000 A6061-T6 Core Stator Core N/A 100,000pcs/Mo N/A Bracket N/A 2,500pcs/Mo N/A Brush N/A 20pcs/Mo N/A JAPANESE COMPANY JAPANESE Product name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: NO PHOTO NO PHOTO NO PHOTO NO PHOTO NO PHOTO PURCHASING ITEMS PURCHASING ITEMS PURCHASING PURCHASING Staff Mr. DOAN TRUNG DUNG TRUNG DOAN Mr. +84-24-3881-1608 (Ext: 3449) +84-24-3959-0310 [email protected] https://www.denso.com/vn/en/ 2001 3,648 56,300 N/A N/A Assembling (4 wheels / 2 wheels) N/A Supervisor Industrial Park, Plot E-1, Thang Long Dong Anh Dist, Hanoi, Vietnam 16949, ISO 14000, OHSAS 18001 ISO TS Industrial Park, Plot E-1, Thang Long Dong Anh Dist, Hanoi, Vietnam Ms. PHAM THI MEN +84-221-358-9388 +84-221-358-9518 [email protected] hamadenvn.com 2008 2,242 II, Park Industrial Plot A4, Thang Long Province My District,Hung Yen Yen 50,000 25,000,000 N/A Assembling (Others) N/A (May 2013), ISO14001 ISO/TS16949 2014) (Feb II, Industrial Park A4, Thang Long Plot No. Province My District, Hung Yen Yen DENSO is a leading supplier of advanced automotive automotive supplier of advanced DENSO is a leading major for and components systems technology, we Enterprise, As Export Processing automakers. the customer for components Automobile provide supplier in local looking for We’re the world. all over & Heat- Die-Casting, Machining, Surface Stamping, & Rubber commodities. Treatment,Plastic Hamaden Vietnam is a companies who manufactures who manufactures is a companies Hamaden Vietnam the toward contribute We actively parts. automobile will Our doors development society. of sustainable as we the world throughout the suppliers be open to We will transactions. in all business fairness pursue and aim partners, as business suppliers our respect trust. mutual on based growth mutual for

DENSO MANUFACTURING VIETNAM CO., LTD VIETNAM CO., DENSO MANUFACTURING HAMADEN VIETNAM CO., LTD CO., VIETNAM HAMADEN TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: FACTORY ADDRESS: ADDRESS: FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY Blade holder Blade for Cleaning machine Copying 40,000 GX-BX weight Roller cycle Motor 100,000 Steel Metal shaft Metal Industrial sewing machine parts 4,000 Carbon steel ring Metal Industrial sewing machine parts 4,000 alloy Carbon steel, steel item processed Precision Industrial sewing machine parts 200 alloy Carbon steel, iron cast steel, Gear Industrial sewing machine parts 200 alloy Carbon steel, iron cast steel, Cam Industrial sewing machine parts 200 alloy Carbon steel, iron cast steel, Product name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING Production Manager Production Mr. NGUYEN QUANG DUONG QUANG NGUYEN Mr. +84-221-397-4986 +84-221-397-4911 [email protected] www.bando-bmvn.com 2012 83 6,720 2,000,000 N/A been a pioneer in the non-tire We have rubber and plastics industries N/A ISO14001(15th Mar 2015), ISO9001(15th Mar 2015) Section Manager M-6 Plot, II Industrial Park, Thang Long Di Su Commune, My Hao Dist., Hung Vietnam Province, Yen M-6 Plot, II Industrial Park, Thang Long Di Su Commune, My Hao Dist., Hung Vietnam Province, Yen Mr. TRAN NAM TRUNG TRAN Mr. +84-32-0354-5889 N/A [email protected] http://www.brother.com 2013 300 Zone, Industrial Truong CN 2-4, Tan Lot Cam Giang Dist., Hai Duong 25,000 41,000,000 N/A Assembling (Others) N/A ISO9001 Industrial Zone, Truong CN 2-4, Tan Lot Cam Giang Dist., Hai Duong Bando Vietnam shall commit No.1 Belt & Plastic No.1 shall commit Bando Vietnam customer’s meeting by supplier in Vietnam parts Bando Group. to and contribute requirement We are a company which manufactures industrial industrial which manufactures company a We are field in the suppliers look for sewing machines.We processed precision gear/cam/ shaft / such as iron products.

BANDO MANUFACTURING (VIETNAM) CO., LTD (VIETNAM) CO., BANDO MANUFACTURING BROTHER MACHINERY VIETNAM CO.,LTD VIETNAM MACHINERY BROTHER TEL: FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY TEL: FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY JAPANESE COMPANY JAPANESE 16 JP 09 JP VIETNAM - JAPAN - Supporting industries exhibition JP 10 VIETNAM - JAPAN - Supporting industries exhibition 17 JP 12 JP 11 JP 50,000 N/A S45C Automobile 40,000 N/A SUS303 Automobile 5,000 N/A SUM23 Automobile 200,000 N/A A6061 Automobile 5,000 N/A C3604 Motorcycle Contact media Contact water Domestic Waste tank treatment N/A PP JAPANESE COMPANY JAPANESE Product name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING N/A +84-27-4222-0492 N/A Mr. KENJI HOTTA Mr. [email protected] http://www.chk.co.jp/ 2013 21 4,000 500,000 720,000 Machining (Precise) Confidentiality ISO9001 General Director General +84-24-6261-0499 +84-24-6261-3305 [email protected] http://bestplantvn.com/ NE5B&DE4 Road, LotB-4B2-CN, Binh MyPhuoc3 IZ, Ben Cat Town, Vietnam Duong Province, NE5B&DE4 Road, LotB-4B2-CN, Binh MyPhuoc3 IZ, Ben Cat Town, Vietnam Duong Province, Mr. KATAOKA FUMIO KATAOKA Mr. 2014 N/A Quang ,Tan Quang industrial zone Tan Lam District,Hung Yen Commune, Van Province 1,500 685,000 N/A Others N/A N/A Street, Cu Van 6th Floor - 23 Nguyen district, Bien Long ward, Lam Ngoc Hanoi Our company was founded in 2013. We are We are in 2013. founded was Our company automobile for parts precision metal manufacturing copiers, and printers of components motorcycle, and equipments products.Production and other related lathes. CNC automatic are Bestplant specializes in providing waste water water waste in providing Bestplant specializes With criteria. technical with Japan tanks treatment bio-filtration of use the and design compact the backwash with patented combined technology customer the provide to ensure we Japan, in system and reasonable with high quality products advanced requirements. customer’s meet to in order prices

CHUUBU KOUGYOU VIETNAM CO.LTD VIETNAM CHUUBU KOUGYOU BESTPLANT CO., LTD CO., BESTPLANT TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY N/A N/A Highly refined metals metals Highly refined Ni) (Cu, Plating material N/A N/A SUS) (Cu, Wire Bar, materials Plating Jig N/A N/A Tools Machining N/A N/A Materials Machining Reamer finish Inner diameter 10 Carbide Tungsten Drill Regrindinh Drilling 20 Carbide Tungsten parts Processing Parts Auto 250,000 SUYB parts Processing Parts Auto 20,000 303 SUS Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING General Director General 2011 80 YOICHI YAMAGISHI Mr. Dist., IZ, Que Vo Que Vo H4-2, Lot Bac Ninh +84-22-2395-2121 +84-22-2395-2123 [email protected] www.esv.com.vn N/A Dist., Bac Ninh IZ, Que Vo H4-2, Que Vo 15,097 3,500,000 N/A Machining (Ordinary) ,Surface coating) (electroplating, Treatment parts Motorcycle parts, Auto ISO 9001 Mr. YAMAWAKI TATSUO YAMAWAKI Mr. Son Tien Son Industrial, Tu 3, TS25, Lot Nam Viet District, Bac Ninh Province, +84-22-2373-4995 +84-22-2373-4085 [email protected] http://www.curius.co.jp/ 2012 80 Son Tien Son Industrial, Tu 3, Ts25, Lot Nam District, Viet Bac Ninh, 12,000 8,000,000 2,152,000 Machining (Precise) DENSO VN, HAMADEN VN ISO 9001 ISO 14000 Enshu Sanko Vietnam Co.,Ltd. is established by Sanko Sanko by is established Co.,Ltd. Vietnam Enshu Sanko mass to going started JSC & Ishii JSC, we Seisaku Surface in specialize We 2012. April in production (plating) and Machining. We use up the treatment to companies our parent from know-how technical need any If you you. to bring the most satisfaction us! contact to do not hesitate support, please With procurement of processed parts, plating, heat plating, heat parts, of processed With procurement etc. cutting tools, tools, treatment,

CURIOUS SEIKI VIETNAM CO.,LTD CO.,LTD VIETNAM SEIKI CURIOUS ENSHU SANKO VIETNAM CO., LTD VIETNAM CO., ENSHU SANKO FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY JAPANESE COMPANY JAPANESE 18 JP 13 JP VIETNAM - JAPAN - Supporting industries exhibition JP 14 VIETNAM - JAPAN - Supporting industries exhibition 19 JP 16 JP 15 JP N/A Aluminum / Steel/ Resin purchase General N/A N/A Consumables, Chemical, mechanical… Motor Cycle parts Cycle Motor N/A 100 Aluminum / Steel/ Resin… parts Automobile N/A 100 Aluminum / Steel/ Resin… Mold, Jig Plastic/ DC N/A N/A material Raw N/A Speaker N/A ABS PP, part Press Speaker N/A , Aluminum Iron Steel, Cord Speaker N/A N/A Cone paper Speaker N/A Steel Injection parts JAPANESE COMPANY JAPANESE Product name: Product for: Use Minimum lot: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING Purchasing Manager Purchasing Mr. HA DANG LAM HA DANG Mr. +84-2113-868-888 +84-2113-868-909 [email protected] 1996 9,723 N/A Vinh town, Phuc Yen Phuc Thang ward, Phuc Province www.honda.com.vn Assistant Manager Assistant Vinh Phuc town, Phuc Thang, Phuc Yen N/A 110,000,000 N/A and Assembling Manufacturing & automobiles motorcycles ISO9001-2008, ISO 14000 Ms. DUONG THI HA Son Tu Bac Ninh, 11, VSIP street No.1, VN Ninh province, Bac town, +84-24-1376-5868 +84-24-1376-5870 [email protected] 2010 3,500 Son Bac Ninh, Tu 11, VSIP street No.1, VN Bac Ninh province, town, 34,000 N/A N/A Speaker N/A ISO 9001:2008 , ISO ISO -TS16949/ 14001:2004 http://www.foster.co.jp Honda Vietnam Co., Ltd. was founded in 1996. founded was Ltd. Co., Honda Vietnam Honda of being in Vietnam, years 20 over After one of the has developed and become Vietnam in the field of motorcycle companies leading in manufacturers and automobile production Vietnam. Located in Bac Ninh Province. Foster Electric Bac Electric Foster Bac Ninh Province. in Located capital investment 100% with operate to started Ninh industry, electronics the in Operating Japan. from in the its strength expresses Electric Bac Ninh Foster products. speaker of automotive manufacture

HONDA VIETNAM COMPANY HONDA FOSTER ELECTRIC(BAC NINH) CO., LTD CO., NINH) ELECTRIC(BAC FOSTER TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY Stretch Film Stretch All Industries N/A N/A Band PET Strapping All Industries N/A N/A Band PP Strapping All Industries N/A N/A Machines Packaging All Industries N/A N/A tool Strapping N/A N/A N/A Blower motor Blower Assembly 10 N/A inverter Panasonic VF200-0042 of Assembly Product 30 pcs/ month N/A Electric parts Assembly 200 Product Taiwan Insulating Material Assembly N/A corming Owen roller Silicon Assembly 20 N/A Material: Material: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING General Manager General +84-28-3756-2828 +84-28-3756-2814 [email protected] www.hiroyuki-vietnam.com 2016 9 12,000 N/A N/A Items of Packaging Manufacturer N/A ISO 9001:2008 , ISO 14001:2004 NGO AN DINH Mr. R&D Manager Perinsutrain 160, Jalan Murni 12Taman Murui Senai , Johor 81400 Malaysia 1 Quarter Str., 901 Kinh Duong Vuong Dist, HCMC, VN Binh Tan An Lac Ward, Mr. LUYEN VAN THANH VAN LUYEN Mr. +84-16-7807-1831 +84-22-6355-5841 [email protected] www.hashima.co.jp 2014 100 II IZ, Duy tien, Ha Nam Dong Van 18,000 1,500,000 8,000,000 of machine Manufacturing Garment Factory N/A IZ, Duy tien, Ha Nam II Dong Van HIROYUKI VIETNAM CO., LTD was established in 2016. established was LTD VIETNAM CO., HIROYUKI Office solution. Head of packaging reader The world High means is in Malaysia. That’s , factory is in Tokyo Price. Quality , low Quality Logistics help in your can We believe we Higher ! We started running at the new premises this month. this month. at the new running premises We started like facilities modern with equipped is factory The welding machine, machines, turning laser cutting machines coating powder machines, electrostatic many years, for experience With Hashima’s etc. high- will produce man power young Vietnamese through working metal sheet quality machines from process. painting

HASHIMA VIETNAM CO., LTD CO., VIETNAM HASHIMA HIROYUKI VIETNAM CO.,LTD HIROYUKI TEL: FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY TEL: FAX: EMAIL: WEBSITE: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: CERTIFICATES: QUALITY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY JAPANESE COMPANY JAPANESE 20 JP 17 JP VIETNAM - JAPAN - Supporting industries exhibition JP 18 VIETNAM - JAPAN - Supporting industries exhibition 21 JP 20 JP 19 JP Pressure Vessel Pressure N/A N/A N/A Oil Unit Lube N/A N/A N/A Defuser N/A N/A N/A Oil Seal N/A N/A N/A Common Bed N/A N/A N/A Fired Brick Fired The Construct Wall Furnace’s N/A Al2O3 Thermocouple the tempera- Measure in the furnace ture N/A N/A panel Control The Furnace Control N/A N/A fiber blanket Ceramic insulation Heat N/A N/A Heater Heat N/A N/A JAPANESE COMPANY JAPANESE Material: Material: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING Chief Representative Mr. HIROSHI TOEDA Mr. +84-28-3820-2117 N/A [email protected] 1853 29,659 N/A N/A Thi 45 Vo 701, Citilight Tower, Room Ho Chi Minh Da Kao Ward, Sau Street, http://www.ihi.co.jp General manager General in Japan 7 Factories N/A 1,071,000,000 14,860,000,000 Machining (Ordinary) ,Industrial Goods (Industrial machine / conveyance Ship equipment) ,Plant Equipment (For plant) plant / Large-scale plant / Power Mr. MORIMATSU KAZUHISA MORIMATSU Mr. Building ,243 Cau Giay , 501,NoZa Room ,Cau Giay District, Ha Noi Dich Vong +84-24-3525-1117 +84-24-3525-1117 [email protected] 2008 30 Hai Boi Commune, Co Dien village, Dong Anh District, Hanoi city 500 30,000 1,600,000 (Industrial Casting,Industrial Goods equipment), machine / conveyance Others Toyota Nissin Brake, Enkei, Yamaha, N/A http://www.hmc-c.com IHI Corporation contributes to development of to contributes IHI Corporation engineering capabilities. advanced through society Our company specializes in fabrication, trading trading fabrication, in specializes Our company the industrial furnaces maintenance and reparing, aluminum melting and holding furnaces, (aluminum furnaces…) heat-treatment holding furnaces,

IHI CORPORATION HOKURIKU MACHINERY CLUB., JSC CLUB., MACHINERY HOKURIKU TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY Air intake product Air intake Car assembly 1,500 PE-HD N/A N/A products Press body assembly Car’s 1,500 steel High tensile (higher than 590 Mpa) products Interior inside car Decorate 3,000 Resin Rubber products assembly Car’s 1,500 rubber metal Inserted injection product Interior resistant Heat 1,500 fabric Non woven Grinding Paper Grinding N/A N/A Band Saw Cutting N/A N/A Welding Wire Welding N/A N/A Tool Cutting Cutting/MC N/A N/A Grinder Wheel Grinding Material: Material: name: Product for: Use Minimum lot: Material: Product name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING +84-21-1386-8117 [email protected] Mr. HOANG VAN CAU VAN HOANG Mr. Manager Deputy General +84-21-1386-8100 toyotavn.com.vn 1995 1,900 , Vinh Phuc Phuc Thang, Phuc Yen 210,000 89,600,000 N/A Assembling (4 wheels / 2 wheels) , Vinh Phuc Phuc Thang, Phuc Yen N/A N/A [email protected] N/A N/A Mr. TOMOOMI KAWAI TOMOOMI Mr. Senior Manager Building, 243A De La ICON4 9th Floor., Dong Da Thanh, Lang Thuong Ward, District, Ha Noi City http://itsuwa.vn/ 2009 22 N/A N/A 100,000 N/A Machining Plastic Injection Molding, Assembling (Home (Precise), Jig / (Metal), Materials electronics), Equipment Nidec, Honda, Yamaha Panasonic, N/A Toyota Motor Vietnam (TMV) is one of the first (TMV) is one of the first Vietnam Motor Toyota . TMV never stop in Vietnam maker automobile with together Forward” to be “Moving making efforts high providing incessantly been has TMV Vietnam. to services customer perfect and quality products as well customers to bring the highest satisfaction the developmentthe Vietnamese of to as contribute industry. automobile Itsuwa Vietnam is a trading company. Products is is Products company. is a trading Vietnam Itsuwa Chemical Grinding wheel, like item Consumable cot, Finger Rust) EDM Wire, Anti (Coolant, Detergent, products potential seeking for We are Soldier tip etc. Grinding Like abroad. to and export in Vietnam room Clean Fabric, Tool, Cutting Welding Wire, Paper, etc. sheet Cutting Parts, product, Press/Shaft

TOYOTA MOTOR VIET NAM CO., LTD VIET NAM CO., MOTOR TOYOTA ITSUWA VIETNAM CO., LTD CO., VIETNAM ITSUWA TEL: FAX: EMAIL: WEBSITE: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY TEL: FAX: EMAIL: WEBSITE: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY JAPANESE COMPANY JAPANESE 22 JP 21 JP VIETNAM - JAPAN - Supporting industries exhibition JP 22 VIETNAM - JAPAN - Supporting industries exhibition 23 JP 24 JP 23 JP Material(Sus, Aluminium, Material(Sus, Brass) Steel, parts Metal N/A N/A Machining Gear parts Metal N/A Metal treatment Surface parts Metal N/A Metal Jig N/A Composite Engineering plastic/ Machinable Ceramics Jig N/A plastic/ceramics Probe Wire/Spring Jig N/A Metal Solder wiring Jig N/A Solder AL Base Jig N/A Alminium Fixture JAPANESE COMPANY JAPANESE Product name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING General Director General +84-24-3959-0292 +84-24-3959-0294 [email protected] Mr. TSUYOSHI IWASAKI TSUYOSHI Mr. 2011 45 960 550,000 N/A http://fact-link.com.vn/mem_profile.php ?id=00001166&page=00001613&lang=jp N/A +81-75-315-5632 N/A [email protected] Plot 17B, Quang Minh Industrial Zone, Me Linh Dist, Hanoi, Vietnam Lathe & Milling N/A N/A Plot 17B, Quang Minh Industrial Zone, Me Linh Dist, Hanoi, Vietnam Mr. NAOKI TOHTANI NAOKI Mr. 1991 690 Nishikyogoku, 10 Tsutsumisoto-cho, Japan Kyoto, Ukyo-ku, N/A 8,300,000 140,000,000 / Components / Electrical Electronic / Equipment Electric Control,Jig industry,printed-circuit semiconductor industry board ISO9001 Nishikyogoku, 10 Tsutsumisoto-cho, Japan Kyoto, Ukyo-ku, https://www.nidec-read.com/ We suplly metal and raisin CNC machining parts. and raisin We suplly metal 1. Semiconductor Package Inspection Systems 2. Inspection Systems Package 1. Semiconductor 3. Inspection Inspection Systems Board Circuit Printed 5. Flat Systems Vision Inspection 4. Optical Fixtures 6. Automatic Systems Display Inspection Panel Equipment, Application Specific Measurement andMachines Development/ design, manufacturing, products the to relating hardware software/ of sales . above

KOM VIETNAM CO., LTD VIETNAM CO., KOM NIDEC-READ CORPORATION NIDEC-READ TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY FACTORY AREA (M²): FACTORY YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY (USD): CAPITAL CHARTER COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INCOME OF NEAREST YEAR (USD): YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: Precision sheet metal metal sheet Precision sample work Machine parts 1 SS400/SPHC/SECC/ SUS/Al/C metal sheet Precision sample work Machine parts 1 SS400/SPHC/SECC/ SUS/Al/C SUS304-No.1 t9.0 SUS304-No.1 processing metal Sheet N/A steel Stainless Sus Hairline Finish Sheet Steel Stainless processing metal Sheet N/A 304/430 steel Stainless metal sheet Precision sample work Machine parts 1 SS400/SPHC/SECC/ SUS/Al/C Rubber (EPDM, NBR, Rubber (EPDM, FKM,...) SILICON, Rubber part production 10 Rubber Shaft Iron Oa Roller Assembly 1,000 Iron ROLLER PLASTIC OA SHAFT Assembly 1,000 plastic Chemicals Rubber mixing for pressing 10 Chemical (Jig, products Metal spring, chuck...) Assembly 100 Metal Product name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING - Deputy Director +84-22-6358-3500 +84-22-6358-3502 [email protected] Mr. UTSUMI YOSUKE UTSUMI Mr. http://www.mjv.com.vn/ 2014 15 2,500 2,100,000 N/A (Ordinary), Sheet Metal Sheet Press, Canning / Welding, (Precise), Metal (Metal), Materials Assembling (Others), Jig / Equipment N/A N/A General Manager (Control Division) (Control Manager General +84-22-1379-1565 +84-22-1379-1573 [email protected] Dong Van II industrial zone, Dong Van Ha Nam province Duy Tien ward, town, Dong Van II industrial zone, Dong Van Ha Nam province Duy Tien ward, town, Ms. TRAN THI DUNG Ms. TRAN N/A 2004 250 Lam Quang Commune, Van Tan District, Hung Yen 12,500 3,400,000 8,000,000 Automation Assembly (Office & rolling Equipments); Rubber pressing Canon, Brother ISO 9001:2004; ISO 14001:2004 Lam Van Quang Commune, Tan District, Hung Yen duce an excellent cost performance of “Low cost * cost of “Low performance cost an excellent duce in Vietnam. High added value” We can provide Precision Sheet Metal products that products Metal Sheet Precision provide We can with the know-how needs customers’ satisfy one’s in Japan. factory at the head 80 years over cultivated quality pro and the Japanese cost The Vietnamese KTC (Hanoi) is a Japanese manufacturer in various in various manufacturer (Hanoi) is a Japanese KTC rubber and 2-wheel vehicles; 4-wheel for rubber parts (OA) automation industry for office which in parts product. providing Beside is the key rubber roller also assembly we customers, to parts rubbers them. for using rubber parts equipments

MARUJYU VIETNAM CO., LTD VIETNAM CO., MARUJYU KTC (HANOI) CO.,LTD (HANOI) KTC FAX: EMAIL: WEBSITE: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: TEL: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY FAX: EMAIL: WEBSITE: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: TEL: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY JAPANESE COMPANY JAPANESE 24 JP 25 JP VIETNAM - JAPAN - Supporting industries exhibition JP 26 VIETNAM - JAPAN - Supporting industries exhibition 25 JP 28 JP 27 JP Plywood Thomson-base 1 Basewood Plate Resin Thomson-based 1 PC,PET,PVC Plate Sus Plate/Sk Die Chrome 1 Sus,Sk polishing solution Surface die Chrome 1 N/A Mold rubber Manufature product N/A N/A JAPANESE COMPANY JAPANESE Product name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING - - Managing Director 2011 60 KOJIMA TOSHIAKI Mr. Industrial Long Unit27,Plot N-1A,Thang Dong Anh district Park +84-24-3959-0240 +84-24-3959-0238 [email protected] http://www.kigataya.com General Director General N/A 1,000 100,000 1,500,000 Dies,Jig / Equipment/Thom- Stamping son-die Chrom-die N/A N/A Mr. LUONG HA NAM LUONG Mr. Duy Town, IZ, Dong Van II Dong Van Tien District, Ha Nam Province +84-22-6626-2155 N/A [email protected] minato-g.co.jp 2013 22 Duy Town, II IZ, Dong Van Dong Van Tien District, Nam Province Ha 1,020 20,000 35,000 Rubber Molding,Materials (Plastic, Rubber) Thailand, Vietnam Japan, N/A Manufacture and sale of Thomson die and etching die sale of Thomson die and etching and Manufacture die). (chrome Minato Rubber Viet Nam Co.,Ltd (“MRV”) is a sub is a (“MRV”) Co.,Ltd Nam Viet Rubber Minato Rubber Minato sisdaryby invested FDI 100% which Japan. from Co.,Ltd. in automo parts rubber manufacturing We major in technical in construction, cushion parts bile brake, machine, ect... in FA packing plastic also manufactures in Japan Our headquarter machine and automobile. of FA used in pad parts

NODA VIETNAM CO.,LTD NODA MINATO RUBBER VIETNAM CO., LTD LTD CO., VIETNAM RUBBER MINATO TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY FACTORY AREA (M²): FACTORY YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY (USD): CAPITAL CHARTER COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: CONTACT INFORMATION CONTACT IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INCOME OF NEAREST YEAR (USD): YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES:

2,600 N/A Window machine Washing 500 Glass Temperred Aluminum Panel Door camera 5,000 plastic, painting process BL267 drain Tube Refrigerator 40,000 HDPE 5502 Frame Speaker 5,000 AS-4133L, SUS301, Ni, Au vale Feeding machine Washing Inner Pot For Rice Rice For Inner Pot Cooker cooker Rice 5,000 Aluminum Meiban cooker Rice 5,000 Plastic substrate Electronic cooker Rice 5,000 material Electronic packing Silicon cooker Rice 5,000 rubber Silicon Heater cooker Rice 5,000 Material: Material: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING Manager of Global Procurement Procurement of Global Manager Division Ms. HOANG THU THUY Ms. HOANG +84-24-3955-0144 [email protected] http://www.panasonic.com/ 2005 131 appliances, electrical component: Electronic information/ automation, factory housing equipment communications N/A N/A +84-24-3955-0111 Product Development Manager Product Industrial Plot J1 - J2, Thang Long Dong Anh District, Hanoi Park, N/A 243,000,000 N/A Industrial Plot J1 - J2, Thang Long Dong Anh District, Hanoi Park, Mr. LE VAN SAU LE VAN Mr. +84-25-1887-7232 +84-25-1887-7238 [email protected] https://tiger-vn.com 2011 212 Industrial Amata Road, Plot 229, Amata City, Bien Hoa Bình Ward, Long Park, Vietnam Dong Nai Province, 33,100 16,000,000 5,500,000 Assembling (Home electronics) TIGER CORPORATION ISO 9001:2015 Industrial Amata Road, Plot 229, Amata City, Bien Hoa Bình Ward, Long Park, Vietnam Dong Nai Province, - of seven com comprises Group Vietnam Panasonic companies manufacturing of which are five panies, and PESVN. Panasonic PAVCV PAPVN, PSNV, PIDVN, supports which holding company (PV) is the Vietnam local searching We are Group. Vietnam Panasonic suppliers. TIGER VIETNAM CO., LTD. is a company with is a company LTD. CO., TIGER VIETNAM in specialize capital, investment 100% Japanese electronic. household top the Japan manufacturing up has been summed technology With advanced to We expect in Japan. than 90 years more for products through the market develop and expand and quality Japan with assembled in Vietnam were technical.

PANASONIC VIETNAM CO., LTD VIETNAM CO., PANASONIC TIGER VIETNAM CO.,LTD VIETNAM TIGER FAX: EMAIL: WEBSITE: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY FAX: EMAIL: WEBSITE: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY JAPANESE COMPANY JAPANESE 26 JP 29 JP VIETNAM - JAPAN - Supporting industries exhibition JP 30 VIETNAM - JAPAN - Supporting industries exhibition 27 JP 32 JP 31 JP Machining Ttank N/A Steel,Stainless Bolt Nut Tank N/A Stainless Steel Cap supply Water 10,000 Brass Cap2 supply Water 10,000 Brass fixing base Connector Electric wiring 1,000 Brass 1 Part supply Water 3,000 PE 2 Part supply Water 3,000 PE JAPANESE COMPANY JAPANESE Product name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: NO PHOTO NO PHOTO PURCHASING ITEMS PURCHASING ITEMS PURCHASING - General Manager General Mr. HIDENOBU TOMURA Mr. +84-22-5326-0715 +84-22-5326-0719 [email protected] 2011 93 Industrial Zone, CN3.2K, Dinh Vu Hai An Dist., Hai Phong Dong Hai 2 Ward, http://www.nkweb.co.jp/rk_engineering/ General Director General Industrial Zone, CN3.2K, Dinh Vu Hai An Dist.,Hai Phong Dong Hai 2 Ward, 5,300 600,000 2,300,000 Treat- / Welding,Heat Press,Canning ment,Plant Ship plant / Equipment (For plant),Others plant / Large-scale Power N/A ISO 9001:2015/ JIS Q 9001:2015 ASME I (U) Section I (S) ASME Section Div. Mr. ONO HIROKI ONO Mr. +84-21-1359-3939/ +84-944-002-169 +84-21-1359-3838 [email protected] 2008 60 Vinh Phuc industrial zone, Binh Xuyen province 9,000 1,200,000 1,600,000 / processing parts Precision treatment Heat PrecJP company, Japanese A large office) (Head ISO 9001:2008 Vinh Phuc industrial zone, Binh Xuyen province www.v-prec.co.jp RK engineering is producing in and sales various in and sales various RK engineering is producing design various to Also available plate. head tanks, type car convection by treatment and heat tanks is RK certificate, ASME Acquiring furnace. bottom of power manufacturing facility to contributing now industries in Japan and food chemical generation, Asia. and southeast PREC VN, formed in 2007 in Vinh Phuc, is machining in 2007 in Vinh PREC VN, formed pro parts precision specializing in manufacturer superiority and cost quality We construct cessing. - materi from in-house production consistent through high Japan’s by treatment and heat processing als to we products, create We do not simply technology. product in each and creativity put our responsibility the customer. to it deliver to

RK ENGINEERING CO.,LTD PREC VN CO.,LTD VN PREC TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT FACTORY AREA (M²): FACTORY YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY (USD): CAPITAL CHARTER ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: PERSON IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT INCOME OF NEAREST YEAR (USD): YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY Rat guard, Vinyl Cur- guard, Rat sheet) tain(PVC for item Mothproofing factory N/A PVC,Other shutter Sheet for item Mothproofing factory N/A N/A Plastic sheet, Plastic film tray, Vacuum For Insulation film N/A PET,PS,PC,Other tape Adhesive parts, Electronic For Floor line tape N/A N/A material, Foam Bubble sheets materials Packing N/A PE,Other SS / Structural Steel / Structural SS Outstanding Processing N/A SC , SK Steel / Stainless SUS Outstanding Processing N/A SUS304, SUS303, SUS316 SUS440, AL/ Aluminum Outstanding Processing N/A A2017, A6063, A5052, A7075 / Copper CU Outstanding Processing N/A Mixing Copper, Pure copper Casting Outstanding Processing N/A Cast iron Product name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: Material: Material: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING General Manager General Mr. AMANO KOTARO Mr. +84-22-0354-5946 [email protected] www.ftcj.co.jp/_en/network/sskv.html 80 Brother,Noble,Meiko,Synztec,Hitachi Cable,Honda Lock... ISO 9001, ISO 14001 +84-22-0354-5991 Vice- President Vice- 2006 Giang Cam D1-Phuc Dien Industrial Zone, Nam Viet District, Hai Duong Province, 4,200 2,000,000 1,220,000 / Electrical Electronic Press/ (Plastic, Components / Materials / Secondary Materials Rubber),Packing Materials Giang Cam D1-Phuc Dien Industrial Zone, Nam Viet District, Hai Duong Province, Mr. OGAWA HIDEKI OGAWA Mr. +84-251-393-6450 ~ 6453 +84-251-393-6454 [email protected] http://www.shiogaiseikivietnam.com/ 200 Industrial 24-2, Amata Plot 224/4, Road City, Bien Hoa Ward, Binh Long Zone, Vietnam Dong Nai Province, 10,220.74 3,000,000 N/A Machining (Ordinary) ,Machining (Ordinary),Sheet Metal (Precise),Sheet (Others) (Precise),Assembling Metal ; Ltd. Co., ; Ricoh Weld Co.,Ltd. Tokyo Ltd. SEIKI Co., SHIOGAI ISO 9001:2015 Industrial 24-2, Amata Plot 224/4, Road City, Bien Hoa Binh Ward, Long Zone, Vietnam Dong Nai Province, 2004 SSK(VIET NAM) CO., LTD. is a tape and film processing and film processing is a tape LTD. NAM) CO., SSK(VIET in Hai Duong, Vietnam. located factory machines press have of us, we As the major features ultra- and processing We are cutters. and rotary parts. electronic and film for of tape precision machines. We are molding vacuum have And, we precision of tray transport and selling manufacturing parts. Our Philosophy:Every company says, “The customer is says, “The customer Our Philosophy:Every company consider but we environment,” the and “Protect first,” responsibilities.We corporate be inherent these to one” only and one “Number motto the toward strive the around the needs of our customers satisfy to such as high quality, strength with our core world and accepting care customer delivery, quick cost, low of any size. orders

SSK (VIET NAM) CO.,LTD SSK SHIOGAI SEIKI VIETNAM CO.,LTD VIETNAM SEIKI SHIOGAI FAX: EMAIL: WEBSITE: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY FAX: EMAIL: WEBSITE: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY JAPANESE COMPANY JAPANESE 28 JP 33 JP VIETNAM - JAPAN - Supporting industries exhibition JP 34 VIETNAM - JAPAN - Supporting industries exhibition 29 JP 36 JP 35 JP Photographic Photographic lenses and Photographic component Optical 1 N/A Commercial/ industrial use optics and Opti- Photographic component cal 1 N/A components Optical and Photographic component Optical 1 N/A Aluminum casting Aluminum casting pan Cooking 200 Aluminum Trivet Gas range 100 Cast iron Burner Gas range 100 Cast iron (Wood Plastic Legs Pattern) Furniture 5,000 ABS Plastic legs Furniture 20,000 ABS JAPANESE COMPANY JAPANESE Product name: Product for: Use Minimum lot: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING - Mr. DUONG QUANG SON DUONG QUANG Mr. Manager Assistant +84-169-310-7896 N/A [email protected] N/A 18,000 14,000,000 38,934,259 lenses/ Photographic / / Commercial components Optical industrial use optics N/A IS0 9001 : 2008 2012 850 industrial & 70A, Noibai Plot No.69B Maidinh Commune, Zone Socson District, Hanoi industrial & 70A, Noibai Plot No.69B Maidinh Commune, Zone Socson District, Hanoi Mr. YUTAKA INOUE YUTAKA Mr. Director General +84-24-3783-5618 N/A [email protected] www.fact-link.com.vn/home/taico-vn 2012 7 N/A N/A 200,000 N/A N/A Vietnam, Precision TOHO JP, TAICO Vietnam Hashima Vietnam,Denyo N/A Hoa Yen Street, Pham Ham 140 Vu District, Cau Giay Hanoi Ward, Tamron is a Japanese 50-year-old firm centralizing firm centralizing 50-year-old is a Japanese Tamron Tamron parts. lenses and optical in manufacturing overs for fostered technology applied sophisticated serve to for products optical produce to years the security,… industries such as electronics, diversified as foundation satisfaction Considering customers’ to is committed business activities, Tamron for base field. in high tech new challenge taking Our main business is exporting various parts and parts various exporting is business main Our with Viet co-operate hope to Japan.We to products companies. and foreign nam companies

TAMRON OPTICAL (VIETNAM) CO., LTD (VIETNAM) CO., OPTICAL TAMRON TAICO VIETNAM CO.,LTD VIETNAM TAICO TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: FACTORY AREA (M²): FACTORY CERTIFICATES: QUALITY IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: INFORMATION CONTACT INCOME OF NEAREST YEAR (USD): YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY (USD): CAPITAL CHARTER ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY TEL: EMAIL: WEBSITE: OFFICE ADDRESS: FAX: PERSON IN CHARGE: PERSON POSITION: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT INCOME OF NEAREST YEAR (USD): YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: MAIN CUSTOMERS: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER ESTABLISHMENT YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: COMPANY PROFILE COMPANY Chemical Products Chemical Coating N/A N/A Die cutting items Masking N/A PET PP, PVC, Abrasive Treatment Surface N/A N/A Coaster Intrabay Transportation N/A N/A Cut parts Cut equip- Measuring ment,Industrial equipment N/A Aluminum,Steel Basket Equipment Kitchen 50 Stainless parts Cut Damper Equipment N/A C3604,S45C Mounting hardware Windamper 2,000 SPCC Product name: Product for: Use Minimum lot: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING - - +84-24-3941-3077 +84-24-3941-2991 [email protected] G.M HIMLAM BUSINESS no.2140, Suite Tower,109 Capital CENTER, 21st Floor, Kiem dist, Hoan Hung Dao str., Tran Ha Noi http://www.tsuchiya-group.co.jp 3 N/A N/A 500,000 N/A AKIYAMA YUSUKE Mr. Leader Ho 209,An Duong Vuong,Tay No.29,Ngo +84-24-3655-9559 +84-24-3655-9559 [email protected] 2014 Others / Building / Printer Motive Auto / Industrymaterial N/A Mr. LE VAN LOI LE VAN Mr. http://www.techno-t.co.jp/vietnamese/ 2015 4 N/A N/A 50,000 N/A (Ordi- Machining Machining (Precise)/ Treatment nary)/ Surface Press/ Forging/ coating)/ (electroplating, Casting/ (Ordinary)/ Metal Sheet (Precise) Metal Sheet leading Via TECHNOTAIYO,each of Japan manufacturer N/A isting products,we also manage the creation of new the creation also manage isting products,we assur quality control,quality and provide products service. processing ance,and We handle tens of thousands of products with our of products of thousands We handle tens answer networks.To and expertise comprehensive supply ex needs,not only do we all our customers Our company was established in july 2015. We in july established was Our company in September office a representative were formerly CO.,LTD TECHNO TAIYO of investment 2013 with 100% an office established have we city,Japan. Sakai from machines processing had our private in Hanoi and directed is which factory alliance each in installed of and management guidance under the technical engineers. Japanese

TSUCHIYA TRADING VIETNAM CO.,LTD TRADING TSUCHIYA TECHNOTAIYO VIET NAM CO.,LTD VIET NAM TECHNOTAIYO FAX: EMAIL: WEBSITE: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY FAX: EMAIL: WEBSITE: MAIN CUSTOMERS: CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: OFFICE ADDRESS: TEL: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: ADDRESS: FACTORY AREA (M²): FACTORY JAPANESE COMPANY JAPANESE 30 JP 37 JP VIETNAM - JAPAN - Supporting industries exhibition JP 38 VIETNAM - JAPAN - Supporting industries exhibition 31 JP 40 JP 39 JP N/A N/A CP Turn Insulator Part Car’s N/A N/A 1000 litter Oil Hinji Cap up Product Make N/A N/A Male Housing Connector Part Car’s N/A N/A Body Part Car’s N/A N/A Male Housing Connector Part Car’s Box, tray packing tray Box, part Packing 1000 Plastic, carton material Mental part Stamping 100kg PK, Cu…. SUS, SPCC, part spare Tooling Making stamping mold As Order SKD,….. material Tooling Making mold As Order SKD… SS400, Machine oil & forming Stamping machine JAPANESE COMPANY JAPANESE Material: Material: Material: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: Material: Material: Material: Material: name: Product for: Use Minimum lot: Material: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: Product name: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: name: Product for: Use Minimum lot: PURCHASING ITEMS PURCHASING ITEMS PURCHASING General Director General +84-24-3959-0250 +84-24-3959-0251 [email protected] Mr. KAZUO YOSHINAKA KAZUO Mr. Dong I.P, Unit 6, Plot N-1, Thang Long Anh, Ha Noi http://yh-seiko.com.vn/ 2011 30 Dong I.P, Unit 6, Plot N-1, Thang Long Anh, Ha Noi 500 3,560,000 850,000 Plastic Injection Molding,Machining (Precise),Casting Plastics Thang Hamaden VN, Daiwa Kuroda Denso, Toyo VietNam Long, .... SEPV, VN, SEWS-CV, Kakaku N/A Ms. NGUYEN THI HOI Ms. NGUYEN Chief of sale CN4-4, Thach That - Quoc Oai IZ, Ha Lot Nam Noi, Viet +84-24-3394-0671 +84-24-3394-0674 [email protected] 2007 350 Oai IZ, Ha CN4-4, Thach That - Quoc Lot Nam Noi, Viet 15,000 7,000,000 7,000,000 Metal Dies,Sheet Press,Stamping Treatment (Precise),Surface Treatment coating),Heat (electroplating, Yamaha Honda group, Denso group, group... ISO 9001 and ISO 14001 http://vinataiyo-spring.com/?lang=en Y.H Seiko Vietnam JSC with high-tech equipment high-tech with JSC Vietnam Seiko Y.H 3D, CAD, CAM such as CNC milling machine centers, with the highest precision. will bring the products - support proj product hi-tech as the first Certificated ect in Vietnam. Vina Taiyo is FDI company with 100% investment investment with 100% is FDI company Vina Taiyo spring, plate spring, leaf is product Our Japan. from We part. other metal snap ring....and clamp and clip, - multi-form in stamping, of being leader proud are (magni treatment and surface treatment ing, heat the as in over as well in Vietnam photphase) coating, world.

Y.H SEIKO VIETNAM, JSC SEIKO Y.H VINA TAIYO SPRING CO.,LTD SPRING TAIYO VINA TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: FACTORY AREA (M²): FACTORY (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: TEL: FAX: EMAIL: WEBSITE: OFFICE ADDRESS: QUALITY CERTIFICATES: QUALITY INFORMATION CONTACT IN CHARGE: PERSON POSITION: MAIN CUSTOMERS: CHARTER CAPITAL (USD): CAPITAL CHARTER YEAR (USD): OF NEAREST INCOME MAIN TECHNOLOGY: FACTORY ADDRESS: ADDRESS: FACTORY AREA (M²): FACTORY COMPANY PROFILE COMPANY YEAR: ESTABLISHMENT NUMBER OF EMPLOYEES: VN 01 3C ENGINEERING 3C Engineering established in 1999 as the first SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition Electrical switchboard maker in Vietnam. With our Product name: Sheet metal fabrication high quality machines and our experience in the Use for: Wind Energy industry, we offer comprehensive solutions for Electrical switchboard up-to 24kV and Sheet metal Minimum lot: N/A fabrication service for Vietnam’s market as well as Material: SPHC, SPCC, ZAM international exporting. COMPANY PROFILE Product name: Siemens - Sivacon S8, 8PT ESTABLISHMENT YEAR: 1999 Use for: LV switchboard for NUMBER OF EMPLOYEES: 129 building, factory, offshore FACTORY ADDRESS: TS17, Tien Son IZ, Dong Nguyen, Tu Son, Minimum lot: N/A Bac Ninh, Vietnam Material: SPHC, SPCC, ZAM FACTORY AREA (M²): 7,000 CHARTER CAPITAL (USD): 1,500,000 INCOME OF NEAREST YEAR (USD): 3,294,000 Product name: Schneider - Nex MAIN TECHNOLOGY: All the machines at ours factories used Use for: MV switchboard for the newest technology from EU, Japan sub-station, factory MAIN CUSTOMERS: General Electric (GE) Haiphong; Kinden; Minimum lot: N/A Yurtec; Kandenko; Takasago Vietnam; Material: SPHC, SPCC, ZAM Swing water ... QUALITY CERTIFICATES: ISO 9001:2015; TCVN 7994-1:2009 (IEC Product name: Rack cabinet 61439-1:2005); IEC 62271-200:2003 CONTACT INFORMATION Use for: Data Center Minimum lot: N/A PERSON IN CHARGE: Mr. DANG QUOC SON Material: SPHC, SPCC, ZAM POSITION: Vice Director OFFICE ADDRESS: 27/216 Dinh Cong, Hoang Mai, Hanoi, Vietnam Product name: Other sheet metal TEL: +84-9-1140-1168 fabrication FAX: +84-24-3664-0625 Use for: local and oversea EMAIL: [email protected] customers Minimum lot: N/A WEBSITE: www.3cengineering.com.vn Material: SPHC, SPCC, ZAM, Stainless, Al, Cu VN 02 3H PLASTICS JSC 3H Plastic., JSC is one of the leading manufacturers SELLING ITEMS specializing in processing Precision Moulding and Product name: Injection mould producing Plastic Products in Vietnam. Our products Use for: Motocycle are produced from original plastic and comply with 1 the safety standards of International Technical Minimum lot: Standards as ROHS, ASTM, EN71, ST2002... Material: NAK80, P60

COMPANY PROFILE Product name: Smart Ball Set ESTABLISHMENT YEAR: 2010 Use for: Educational Toys NUMBER OF EMPLOYEES: 50 Minimum lot: 10,000 FACTORY ADDRESS: Lot 29A, Quang Minh Industrial Zone, Material: ABS Me Linh Dist, Ha Noi City FACTORY AREA (M²): 1,200 CHARTER CAPITAL (USD): 82,000 Product name: Head lamp switch INCOME OF NEAREST YEAR (USD): 800,000 signal Head lamp MAIN TECHNOLOGY: Plastic Molding (Injection Molding / switch signal Vacuum Molding / Blow Molding / Use for: Yamaha motorcycle Extrusion),Plastic Injection Molding Minimum lot: 50,000 MAIN CUSTOMERS: Japan, India, Australia Material: POM QUALITY CERTIFICATES: ISO 9001-2008 Product name: Switch lamp Cover CONTACT INFORMATION Use for: Motorcycle Minimum lot: 50,000 PERSON IN CHARGE: Mr. HOANG VAN HUONG PA6,GF30% POSITION: Director Material: OFFICE ADDRESS: 5/118 Cau Giay, Quan Hoa Commune, Ha Noi City Product name: Head lamp switch TEL: +84-24-2217-2778 signal FAX: N/A Use for: Yamaha motorcycle EMAIL: [email protected] Minimum lot: 50,000 WEBSITE: www.3hgo.com.vn Material: POM

32 VIETNAMESE COMPANY AN PHU VIET PLASTICS CO.,LTD VN 03 An Phu Viet Plastics Co.,Ltd was founded officially on SELLING ITEMS

November 25th, 2011. An Phu Viet plastics Co.,Ltd is Product name: Motorcycle parts VIETNAM - JAPAN - Supporting industries exhibition a company specializing in producing plastic products Use for: Motorcyle including electronic components, telephones, motorcyles..... Minimum lot: 100,000 Material: Plastics

COMPANY PROFILE ESTABLISHMENT YEAR: 2011 Product name: Hand Phone Parts Use for: Mobifone, phone NUMBER OF EMPLOYEES: 300 charger, phone case.. FACTORY ADDRESS: Km30+100, highway No.5 Bach Sam 100,000 commune, My Hao district, Hung Yen Minimum lot: province, Viet Nam Material: Plastics FACTORY AREA (M²): 6,141 CHARTER CAPITAL (USD): 1,000,000 Product name: Sewing Machine Parts INCOME OF NEAREST YEAR (USD): 5,000,000 Use for: Sewing machine MAIN TECHNOLOGY: Motorcycle parts, Mobile Phone Cover, Minimum lot: 100,000 Sewing Machine Parts and Plastic Mold Material: Plastics MAIN CUSTOMERS: Samsung, Panasonic, Honda, Fami, Heiwa QUALITY CERTIFICATES: ISO 9001-2008 & ISO 14001: 2004 Product name: Plastic Mold CONTACT INFORMATION Use for: Plastic Mold Machine Minimum lot: 1 PERSON IN CHARGE: Mr. NGUYEN VAN HUNG Material: SkD61-52HRC, S-star - POSITION: General Director 52HRC, PD613-60HRC OFFICE ADDRESS: Km30+100, highway No.5, Bach Sam commune, My Hao district, Hung Yen Product name: Medical equipment province, Viet Nam TEL: +84-22-1375-1336 Use for: Plastic safe FAX: +84-22-1375-1335 Minimum lot: 100,000 EMAIL: [email protected] Material: PP J560 WEBSITE: www.anphuviet.com.vn

BAC VIET TECHNOLOGY JSC VN 04 Bac Viet Technology Joint Stock Company was SELLING ITEMS established in 2008, located in Km 7, Highway 18, Que Product name: Injection Mold Vo IZ, Bac Ninh, Vietnam with total area of 3.2 hecta, Use for: Injection Molding specializing in manufacturing injection molding and hi-tech electronics plastic products such as earphone Minimum lot: 1 parts, printer parts and mobile parts. Material: Steel (NAK, SKD 61…)

COMPANY PROFILE Product name: Electronic parts ESTABLISHMENT YEAR: 2008 Use for: Printer NUMBER OF EMPLOYEES: 250 Minimum lot: 500,000 FACTORY ADDRESS: Km 7, Highway 18, Phuong Lieu commune Material: Plastic Que Vo Industrial Zone, Bac Ninh, Vietnam FACTORY AREA (M²): 32,183 CHARTER CAPITAL (USD): 5,511,363 Product name: Electronic parts INCOME OF NEAREST YEAR (USD): 6,568,000 Use for: Mobiles MAIN TECHNOLOGY: Plastic Molding (Injection Molding ), Minimum lot: 500,000 Plastic Injection Molding,Electronic / Material: Plastic Electrical Components / Electric Control MAIN CUSTOMERS: Canon, Samsung, Muto, Kyocera QUALITY CERTIFICATES: ISO 9001:2015; ISO 14001:2015 Product name: Roll box CONTACT INFORMATION Use for: Packaging, transportation PERSON IN CHARGE: Mr. VU HUU THANG Minimum lot: 50 POSITION: Vice director Material: Steel OFFICE ADDRESS: Km 7, Highway 18, Phuong Lieu commune Que Vo Industrial Zone, Bac Ninh, Vietnam Product name: Steel box (I_tainer) TEL: +84-22-2361-7933 Use for: Packaging FAX: +84-22-2361-7932 Minimum lot: 100 EMAIL: [email protected] Material: Steel WEBSITE: www.bacvietgroup.com

VIETNAMESE COMPANY 33 VN 05 BINH MINH TMC CO.,LTD Binh Minh TMC Co., Ltd was established in 2008. SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition Line of business: To design and manufacture jigs, Product name: Inspection jig moulds, precision parts for machine. We have a team Use for: To test product of experienced engineers who are able to design and manufacture jigs and molds according to customer Minimum lot: 1 requirements. Our products have been exporting to Material: S45C, SK3 Japanese market. COMPANY PROFILE Product name: Assembly jig ESTABLISHMENT YEAR: 2008 Use for: To assemble the NUMBER OF EMPLOYEES: 130 product FACTORY ADDRESS: Plot B2-4-3,Nam Thang Long Industrial Minimum lot: 1 Park, Thuy Phuong Ward, Bac Tu Liem Material: SKD11, S45C, SK3 Dist, Hanoi City, Vietnam FACTORY AREA (M²): 6,000 Product name: Injection mold and CHARTER CAPITAL (USD): 2,000,000 mold part INCOME OF NEAREST YEAR (USD): 4,500,000 Use for: To mold plastic MAIN TECHNOLOGY: Jigs and moulds products MAIN CUSTOMERS: Canon, Yamaha, Samsung, Panasonic Minimum lot: 1 QUALITY CERTIFICATES: ISO 9001:2015 Material: HPM38-S55C, PX5 Product name: Mold part CONTACT INFORMATION Use for: Plastic Injection Mold Minimum lot: 1 PERSON IN CHARGE: Mr. NGUYEN VAN TUAN Material: PX5 POSITION: General Director OFFICE ADDRESS: Plot B2-4-3,Nam Thang Long Industrial Park, Thuy Phuong Ward, Bac Tu Liem Product name: Mould Dist, Hanoi City, Vietnam Use for: To automotive TEL: +84-24-3780-5296 1 FAX: +84-24-3780-5303 Minimum lot: EMAIL: [email protected] Material: S55C, NAK80, SKD11 WEBSITE: www.binhminhtmc.com

VN 06 VAN LONG PLASTIC CO.,LTD Our company was established in 1999. It is located SELLING ITEMS near Hai Phong port, transportation is convenient Product name: Vacuum cleaner for exporting goods abroad. We manufacture plastic Use for: Cleanning The House products like : PE, PP, ABS..for domestic and export goods. The main customers are : Pioneer, Idemitsu, Minimum lot: 20,000 JX Nippon...We provide high quality products, Material: ABS Plastic good service, short delivery time, satisfying every customers. COMPANY PROFILE Product name: Bottle 4L ESTABLISHMENT YEAR: 1999 Use for: Bottle containing oil NUMBER OF EMPLOYEES: 300 Minimum lot: 10,000 FACTORY ADDRESS: No 15A, An Tri Street, Hung Vuong Ward, Material: HDPE Plastic Hong Bang District, Hai Phong City FACTORY AREA (M²): 18,000 CHARTER CAPITAL (USD): 1,780,000 INCOME OF NEAREST YEAR (USD): 9,700,000 Product name: Frame MAIN TECHNOLOGY: Plastic Molding (Injection Molding / Use for: Speaker Vacuum Molding / Blow Molding / Minimum lot: 40,000 Extrusion),Assembling (Others) Material: ABS Plastic MAIN CUSTOMERS: LG Viet Nam,Sony, Pioneer,JX Nippon Oil, Idemitsu,... QUALITY CERTIFICATES: ISO 9001:2015; ISO 14001:2015 Product name: Pail 18L CONTACT INFORMATION Use for: Pail used for oil Minimum lot: 1,000 PERSON IN CHARGE: Mr. NGUYEN TRONG TUAN Material: PP Plastic POSITION: Director OFFICE ADDRESS: No 15A, An Tri Street, Hung Vuong Ward, Hong Bang District, Hai Phong City Product name: Bottle 1L TEL: +84-22-5379-8886 Use for: Bottle containing oil FAX: +84-22-5379-8887 Minimum lot: 20,000 EMAIL: [email protected] Material: HDPE plastic WEBSITE: vanlongplastic.com.vn

34 VIETNAMESE COMPANY ECO VIET NAM CO., LTD VN 07 ECO VIETNAM CO., LTD.(L’ECO), engaged in the SELLING ITEMS

supporting industry by manufacturing, processing of Product name: Motor core for AC motor VIETNAM - JAPAN - Supporting industries exhibition steel material including slitting & shearing services, Use for: Electric motor motor core, transformer core lamination, stamping products, metal packing products, steel pipe. Minimum lot: 1,000 -> 10,000 sets Material: Non grain oriented steel COMPANY PROFILE Product name: Motor core for DC motor ESTABLISHMENT YEAR: 2010 Use for: Electric motor NUMBER OF EMPLOYEES: 140 Minimum lot: 10,000 FACTORY ADDRESS: Lot II.8.1 , Khai Son IZ, Thanh Khuong, Material: Non grain oriented Thuan Thanh, Bac Ninh steel FACTORY AREA (M²): 14,000 CHARTER CAPITAL (USD): 6,000,000 INCOME OF NEAREST YEAR (USD): N/A Product name: Genrator core/ EI core MAIN TECHNOLOGY: Motor and transformer core Use for: Electric motor lamination, metal stamping, Metal packing: drum and can, Steel pipe, Minimum lot: 1,000 sets steel slitting and shearing service Material: Non grain oriented steel MAIN CUSTOMERS: Samsung, Panasonic, EWI, Chi hua, … QUALITY CERTIFICATES: ISO 9001-2008 & ISO 14001: 2015 Product name: Steel drum 180L/210L CONTACT INFORMATION Use for: Packing oil, chemical, paint, food… PERSON IN CHARGE: Mr. PHAM VAN TUAN Minimum lot: 200 sets POSITION: Director Material: Cold rolled steel OFFICE ADDRESS: Lot II.8.1 , Khai Son IZ, Thanh Khuong, Thuan Thanh, Bac Ninh Product name: Steel coil/sheet/pipe TEL: +84-222-3798-483 Use for: home appliance, FAX: +84-222-3798-484 furniture EMAIL: [email protected] Minimum lot: 1,000 Kg WEBSITE: www.ecovn.vn Material: Cold rolled steel

ECOTEK CO., LTD VN 08 Ecotek Co., Ltd. is a partner of the famous Japanese SELLING ITEMS company, specializing in the manufacture of molds Product name: Mold and precision plastic components, manufacture Use for: Electronics of plastic pipe for automotive, motorcycle and electronic components, 100% for export products. Minimum lot: 10 -> 15 Material: Steel

COMPANY PROFILE ESTABLISHMENT YEAR: 2014 Product name: Plastic Molding NUMBER OF EMPLOYEES: 130 Use for: Electronics Minimum lot: 1,000 FACTORY ADDRESS: Lot III.4.1, Thuan Thanh 3 Industrial Zone, Plastic Thanh Khuong, Thuan Thanh, Bac Ninh, Material: Viet Nam FACTORY AREA (M²): 6,288 CHARTER CAPITAL (USD): 2,000,000 Product name: PVC tube INCOME OF NEAREST YEAR (USD): 1,900,000 Use for: Automobile and motobike MAIN TECHNOLOGY: PVC tubes and plastic Products mold Minimum lot: 1,000 for plastic and PVC products moulding Material: Plastic MAIN CUSTOMERS: Muto HaNoi, Tenma Viet Nam, Nissei QUALITY CERTIFICATES: ISO 9001-2015 & ISO 14001: 2015 CONTACT INFORMATION PERSON IN CHARGE: Mr. BUI XUAN HAI POSITION: Director OFFICE ADDRESS: Lot III.4.1, Thuan Thanh 3 Industrial Zone, Thanh Khuong, Thuan Thanh, Bac Ninh, Viet Nam TEL: +84-222-379-8889 FAX: +84-222-379-8890 EMAIL: [email protected] WEBSITE: www.eco-tek.vn

VIETNAMESE COMPANY 35 VN 09 FOSHAN CERAMIC MACHINERY AND MOLD JSC - Making moldbase SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition - Precision Machining the raw material size up to Product name: Moldbase 1200x3200 Use for: Plastic Mold - Processing big size press mould, piercing die, jig Minimum lot: 1 - Design and processing the transporting equipment in the factory. Material: S50C, S55C

COMPANY PROFILE ESTABLISHMENT YEAR: 2008 Product name: NC Controlled Vertical Bandsaw Amada NUMBER OF EMPLOYEES: 60 VM3800 FACTORY ADDRESS: Lot 46B, Quang Minh Industrial Park, Use for: Cut Material Me Linh, Ha Noi Minimum lot: 1 FACTORY AREA (M²): 1,600 Material: N/A CHARTER CAPITAL (USD): 1,150,000 INCOME OF NEAREST YEAR (USD): 2,000,000 Product name: Big-size Milling Machine. MAIN TECHNOLOGY: Plastic Molding (Injection Molding / X4300/y1400/z800 Vacuum Molding / Blow Molding / Use for: Milling Extrusion), Press, Rubber Molding, Minimum lot: 1 Materials (Metal), Jig / Equipment, Material: S45C, S50C, S55C, K3, Others P20,NAK80, SKD11, SKD61, MAIN CUSTOMERS: Osco, Daido, Fuji Vietnam, TMT, HTMP Product name: Grinding big-size material. QUALITY CERTIFICATES: N/A X3500/y1250/Z800 Use for: CONTACT INFORMATION Grinding Minimum lot: 1 PERSON IN CHARGE: Ms. PHAM KIEU TRANG Material: S45C, S50C, S55C, K3, POSITION: Sales Manager P20,NAK80, SKD11, SKD61, OFFICE ADDRESS: Lot 46B, Quang Minh Industrial Park, Product name: CNC Big-size Material Me Linh, Ha Noi X3200-Y1400-Z660 TEL: +84-243-525-0604 Use for: Grinding FAX: N/A Minimum lot: 1 EMAIL: [email protected] Material: S45C, S50C, S55C, K3, WEBSITE: www.foshanceramic.com.vn P20,NAK80, SKD11, SKD61,

VN 10 GIAI PHONG RUBBER CO., LTD GIAI PHONG RUBBER is manufacturer of PVC, Plastics SELLING ITEMS and Rubber Parts in supporting Industries. We Product name: Sleeve/ Cover remain committed to our value customers and global Use for: Manufacturing for environmental perspectives in developing original motorcyle,automobile technology and manufacturing new products. Aiming to be a sustainable corporation with products Minimum lot: 10,000 and business activities which contribute to the Material: PVC, Plastic environment, humans, and societies. COMPANY PROFILE Product name: Oring ESTABLISHMENT YEAR: 2004 Use for: Manufacturing for NUMBER OF EMPLOYEES: 180 motorcyle,office FACTORY ADDRESS: Ngoc Da, Tan Quang, Van Lam, Hung Yen equipment and home FACTORY AREA (M²): 3,500 Minimum lot: 5,000 -> 10,000 CHARTER CAPITAL (USD): 1,000,000 OFFICE ADDRESS: Silicon, Rubber INCOME OF NEAREST YEAR (USD): N/A Material: MAIN TECHNOLOGY: Industrial Plastic, PVC and Rubber Product name: Damper seat/ Gasket Products Mold for Rubber and PVC Use for: Manufacturing for products moulding motorcyle,automobile MAIN CUSTOMERS: VN Nippon Seiki Co., LTD, Nissin brake Vietnam Co., LTD, San ei Rubber Co., Minimum lot: 10,000 TLD,Thai Summit harness Public Material: Rubber company limited Product name: Sleeve/ Cover QUALITY CERTIFICATES: ISO 9001-2008 & ISO 14001: 2004 Use for: Manufacturing for CONTACT INFORMATION motorcyle,automobile Minimum lot: 10,000 PERSON IN CHARGE: Mr. CHU TRONG TRUNG Material: PVC, Plastic POSITION: CEO OFFICE ADDRESS: Ngoc Da, Tan Quang, Van Lam, Hung Yen Product name: Sleeve/ Cover TEL: +84-24-3677-0568 Use for: Manufacturing for FAX: N/A motorcyle,automobile EMAIL: [email protected] Minimum lot: 10,000 WEBSITE: www.giaiphongrubber.com/ www. Material: PVC, Plastic gprubber.vn

36 VIETNAMESE COMPANY HAI PHUONG CO.,LTD VN 11 With the experience of more than 10 years, the Hai SELLING ITEMS

Phuong brand has been widely recognized in the Product name: All kinds of normal add VIETNAM - JAPAN - Supporting industries exhibition mechanical market. We have a diversified collection special bolts, nuts, of high quality products, manufactured by advanced screws, rivets, etc., technology meeting the requirements of different Use for: Screws for wood, industries. plastic Minimum lot: 50,000 Material: Steel , Stainless steel COMPANY PROFILE Product name: accessories ESTABLISHMENT YEAR: 1999 Use for: accessories for wood, NUMBER OF EMPLOYEES: 100 plastic and metal FACTORY ADDRESS: Lien Hiep ward , Phuc Tho District, Ha industries,etc., Noi City Minimum lot: N/A FACTORY AREA (M²): 5,000 Material: N/A CHARTER CAPITAL (USD): 500,000 INCOME OF NEAREST YEAR (USD): 1,800,000 MAIN TECHNOLOGY: Press,Machining (Ordinary) ,Canning / Welding,Surface Treatment (electroplating, coating),Others MAIN CUSTOMERS: Ìkea, Woodslands, Nitori Funiture, Coldtech Corporation... QUALITY CERTIFICATES: ISO 9001:2008 CONTACT INFORMATION PERSON IN CHARGE: Mr. DO HAI POSITION: Director OFFICE ADDRESS: Lien Hiep ward , Phuc Tho District, Ha Noi City TEL: +84-24-3364-8292 FAX: N/A EMAIL: [email protected] WEBSITE: haiphuonggroup.com

HA NOI INDUSTRY TRADING INVESTMENT JSC VN 12 HA NOI INDUSTRY TRADING INVESTMENT.JSC is SELLING ITEMS a company operating in the field of mechanical Product name: Hot Stamping Products engineering, plastic mold, punching, hot stamping, Use for: Assembly of plastic injection molding. With the motto: “Customer components satisfaction is our success” Minimum lot: 500 Material: S45C COMPANY PROFILE Product name: Mold plastic injection ESTABLISHMENT YEAR: 2011 (medicine box) NUMBER OF EMPLOYEES: 70 Use for: Medicine box FACTORY ADDRESS: Km12, National Highway 1A, Ngoc Hoi Minimum lot: 1 Street, Thanh Tri District, Hanoi Material: 2083 FACTORY AREA (M²): 900 CHARTER CAPITAL (USD): 220,000 Product name: Rulo mold INCOME OF NEAREST YEAR (USD): 1,240,000 Use for: Assembled in the machine MAIN TECHNOLOGY: Plastic Injection Molding, Press Minimum lot: 1 MAIN CUSTOMERS: Kai.Ltd, Osawa, JAT.Jsc, Tecomen. Material: NAK80 steel Ltd, Fujipla, Sankyo, Rhythm, Fukoku, Daido, Futaba, Citicom, Pro-Vision QUALITY CERTIFICATES: ISO 9001: 2015 Product name: Headset mold CONTACT INFORMATION Use for: Mobile phone headsets Minimum lot: 1 PERSON IN CHARGE: Mr. LUONG NGOC THAI Material: NAK80 POSITION: Deputy Business OFFICE ADDRESS: Km12, National Highway 1A, Ngoc Hoi Street, Thanh Tri District, Hanoi Product name: Water cut off TEL: +84-24-3681-6289 / +(84)-976-888-048 Use for: Install fresh water FAX: +84-24-3681-6289 system EMAIL: [email protected] Minimum lot: 500 WEBSITE: osakaseimitsu.vn Material: ABS plastic

VIETNAMESE COMPANY 37 VN 13 HUNG DUNG CO.,LTD Hung Dung Company is a company specialized SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition in manufacturing supporting products and Product name: Led Highbay Light lighting equipment - led lights. Our products use Use for: Factories, Auto garage the component of the world famous electronics companies and are managed according to ISO 9001: Minimum lot: 1 2015 standards. Material: Led chip, Aluminium heatsink COMPANY PROFILE Product name: Wireharness ESTABLISHMENT YEAR: 1998 Use for: Sewing machine NUMBER OF EMPLOYEES: 100 Minimum lot: 1,000 FACTORY ADDRESS: Km 42 + 600, Highway 5A, Lai Cach town, Material: Wire, plastic parts, Cam Giang district, Hai Duong province electronics parts FACTORY AREA (M²): 2,000 CHARTER CAPITAL (USD): 500,000 Product name: Control INCOME OF NEAREST YEAR (USD): 3,000,000 Use for: Car air conditioning MAIN TECHNOLOGY: Electronic / Electrical Components / controller Electric Control,Assembling (Home Minimum lot: N/A electronics), Others Material: N/A MAIN CUSTOMERS: Japanese, Vietnamese QUALITY CERTIFICATES: ISO 9001-2015 Product name: Ferrite Core CONTACT INFORMATION Use for: Transformer Minimum lot: N/A PERSON IN CHARGE: Mr. NGUYEN TIEN DUNG Material: N/A POSITION: Director OFFICE ADDRESS: Km 42 + 600, Highway 5A, Lai Cach town, Cam Giang district, Hai Duong province Product name: Wireharness TEL: +84-220-3782-399 Use for: Sewer machine FAX: +84-220-3782-396 Minimum lot: N/A EMAIL: [email protected] Material: N/A WEBSITE: www.hungdunghd.com

VN 14 ICHI VIETNAM SUPPORTING INDUSTRY JSC Ichi Vietnam is a small company founded in SELLING ITEMS 2008 with under 100 employees. Howerver, our Product name: Jig TS manufacturing performance started 5 years before Use for: Wiring systrem that in an industrial mould and jig manufacturing N/A workshop. After that period of time, we have had a Minimum lot: lot of experience and gained much confidence of the Material: Inox customers, especially Japanese customers. COMPANY PROFILE Product name: Jig Connector ESTABLISHMENT YEAR: 2008 Use for: Wiring production NUMBER OF EMPLOYEES: 78 Minimum lot: N/A FACTORY ADDRESS: Lot 05/9B Hoang Mai Industrial Park, Material: POM Plastic Hoang Mai District, Ha Noi city FACTORY AREA (M²): 2,000 CHARTER CAPITAL (USD): 1,000,000 Product name: Jig US INCOME OF NEAREST YEAR (USD): 3,630,000 Use for: Wiring System MAIN TECHNOLOGY: Jig / Equipment Minimum lot: N/A MAIN CUSTOMERS: SD Global Viet Nam, Sumidenso Viet Material: Inox Nam, Sumi VietNam Wiring System QUALITY CERTIFICATES: ISO 9001:2015 Product name: Jig Kuradai CONTACT INFORMATION Use for: Wiring System Minimum lot: N/A PERSON IN CHARGE: Mr. PHAM HOANG LONG Material: Inox POSITION: Director OFFICE ADDRESS: Lot 05/9B Hoang Mai Industrial Park, Hoang Mai District, Ha Noi city Product name: Go No jig TEL: +84-24-3645-4297 Use for: Checking products FAX: N/A Minimum lot: N/A EMAIL: [email protected] Material: Plastic, Inox WEBSITE: www.ichivietnam.com.vn

38 VIETNAMESE COMPANY INDUSTRIAL MECHANICS AND AUTOMATION CO.,LTD (IDMEA CO.,LTD) VN 15 IDMEA is established in 2008. We supply Mechanics SELLING ITEMS

Equipments adn for FDI factory. we have a fully Product name: Jig VIETNAM - JAPAN - Supporting industries exhibition tooled machine shop, equipped with CNC machining Use for: Inspection And centers as well as vertical and horizontal boring mills. Assembly Of IDMEA is able to provide the optimum manufacturing Mechanical Products process from start to finish. Minimum lot: 1 Material: Plastic, Al, steel, Inox COMPANY PROFILE Product name: Conveyor, roller ESTABLISHMENT YEAR: 2008 Use for: goods transport in NUMBER OF EMPLOYEES: 140 factory FACTORY ADDRESS: No.4, Lot 2, Lai Xa Industrial Park, Minimum lot: 1 Kim Chung, Hoai Duc, Hanoi Material: N/A FACTORY AREA (M²): 5,000 CHARTER CAPITAL (USD): 240,000 Product name: Automatic Machines INCOME OF NEAREST YEAR (USD): 4,450,000 Use for: Manufacture MAIN TECHNOLOGY: Jig / Equipment Minimum lot: 1 MAIN CUSTOMERS: Sam Sung, Canon, Kyocera, Sumitomo, Material: N/A Toyota QUALITY CERTIFICATES: N/A Product name: Glue Machine CONTACT INFORMATION Use for: Auto Machine Minimum lot: 1 PERSON IN CHARGE: Ms. PHAN THI THANG Material: Glue Machine POSITION: Sales Manager OFFICE ADDRESS: P601, 6 Floor, Kim Anh Building, 78 Lane, Duy Tan, Cau Giay, Ha Noi Product name: Jig Assembly TEL: +84-24-6296-2032 Use for: Jig Assembly FAX: N/A Minimum lot: 1 EMAIL: [email protected] Material: Aluminium WEBSITE: www.idmea.com

INNOTEK JSC VN 16 Innotek’s business is majoring in manufacturing SELLING ITEMS automobile- motocycle parts and component in Product name: R Pillion Step supporting industry.We have various kind of machine Use for: Motocycle was imported from Japan and Taiwan, capability to sastify the demand of domestic and oversea Minimum lot: 1,000 market. Our motto is always satisfy all requirement Material: SPHC of customers with stable quality, reasonable prices and delivery on time. COMPANY PROFILE Product name: Lever Comp Br Lock ESTABLISHMENT YEAR: 2011 Use for: Motocycle NUMBER OF EMPLOYEES: 350 Minimum lot: 1,000 FACTORY ADDRESS: Lot II- 4.1, Que Vo II Industrial Zone, Material: Stainless steel Ngoc Xa Commune, Que Vo District, Bac Ninh Province, Vietnam FACTORY AREA (M²): 25,000 Product name: Clamper Fuel Tube CHARTER CAPITAL (USD): 6,000,000 INCOME OF NEAREST YEAR (USD): 6,000,000 Use for: Motocycle 2,000 MAIN TECHNOLOGY: Press,Machining (Ordinary) ,Machining Minimum lot: (Precise),Canning / Welding Material: SWRM10, SPHC MAIN CUSTOMERS: Honda, Showa Japan,Thaisteel, Hokuriku, Showa Vietnam, Jaguar, TS Vietnam QUALITY CERTIFICATES: ISO 9001:2008, 14001:2004 Product name: Stay CONTACT INFORMATION Use for: Motocycle Minimum lot: 1,000 PERSON IN CHARGE: Ms. NHUNG DONG Material: SPHC POSITION: Assistant of R&D Department OFFICE ADDRESS: Lot II-4.1, Que Vo II Industrial Zone, Ngoc Xa Commune, Que Vo District, Bac Ninh Province, Vietnam Product name: Stay Comp Ign Coil TEL: +84-22-2362-3318 Use for: Motocycle FAX: +84-22-2362-3319 Minimum lot: 1,000 EMAIL: [email protected] Material: SPHC WEBSITE: www.innotek.com.vn

VIETNAMESE COMPANY 39 VN 17 JAT AUTOPARTS AND INDUSTRY EQUIPMENTS PRODUCTION., JSC JAT company specializes in the field of manufacturing SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition auto parts, motorbike parts, industrial equipment Product name: Motorbike part and other mechanical products. Currently JAT., JSC Use for: Motorbike part has become a important company in manufacturing automobile and motorcycles parts for supporting Minimum lot: 5,000 industry in Viet Nam. Material: Steel

COMPANY PROFILE Product name: Boss center ESTABLISHMENT YEAR: 2008 Use for: Motorbike NUMBER OF EMPLOYEES: 280 Minimum lot: 5,000 FACTORY ADDRESS: Lot II-8.2 Que Vo II IZ, Ngoc Xa commune, Material: Steel Que Vo District, Bac Ninh Province FACTORY AREA (M²): 3,500 CHARTER CAPITAL (USD): 900,000 Product name: Holder INCOME OF NEAREST YEAR (USD): 7,030,000 Use for: Printer MAIN TECHNOLOGY: Press, Machining (Ordinary), Machining Minimum lot: 5,000 (Precise), Canning / Welding, Forging Material: Steel MAIN CUSTOMERS: Honda, Piaggio, TSC QUALITY CERTIFICATES: ISO 9001:2008, ISO 14001:2004 Product name: Pipe CONTACT INFORMATION Use for: Automobile Part PERSON IN CHARGE: Ms. NGUYEN TRANG NHUNG Minimum lot: 5,000 Ms. TRINH QUYNH TRANG Material: Inox SUS304 POSITION: Marketing OFFICE ADDRESS: Lot II-8.2 Que Vo II IZ, Ngoc Xa commune, Que Vo District, Bac Ninh Province Product name: Drump brake TEL: +84-9-6639-1436/ +84-958-378-499 FAX: N/A Use for: Motor bike 5,000 EMAIL: [email protected] Minimum lot: [email protected] Material: Steel WEBSITE: http://www.jat-autopart.com

VN 18 KIM LONG PRODUCTION AND TRADING SERVICE CO., LTD SELLING ITEMS Product name: Rubber Mold Use for: Motorbike Minimum lot: 1 Material: S50C

COMPANY PROFILE Product name: Rubber Mold ESTABLISHMENT YEAR: 2001 Use for: Motorbike NUMBER OF EMPLOYEES: 50 Minimum lot: 1 FACTORY ADDRESS: Lot A2, CN5-Tu Liem IP-Phuong Canh Material: S50C Commune, Nam Tu Liem District, Ha Noi FACTORY AREA (M²): 4,000 CHARTER CAPITAL (USD): 2,000,000 Product name: Press machine INCOME OF NEAREST YEAR (USD): 2,000,000 Use for: Motorbike MAIN TECHNOLOGY: N/A Minimum lot: 1 S50C MAIN CUSTOMERS: Honda, Vietinak, Yasufuku, Ishigaki Material: QUALITY CERTIFICATES: ISO 9001:2015

Product name: Jig for assembly CONTACT INFORMATION Use for: Motorbike Minimum lot: 1 PERSON IN CHARGE: Mr. HA QUYET THANG Material: S50C, Aluminium POSITION: Director OFFICE ADDRESS: Lot A2, CN5-Tu Liem IP-Phuong Canh Commune, Nam Tu Liem District, Ha Noi TEL: +84-24-3780-5052 FAX: +84-24-3780-5063 EMAIL: [email protected] WEBSITE: www.kimlongmold.com/

40 VIETNAMESE COMPANY KIM SEN INDUSTRIAL JSC VN 19 Established in 2013, Kim Sen Industrial JSC has SELLING ITEMS

gradually gained reputation in manufacturing Product name: Industrial aluminum VIETNAM - JAPAN - Supporting industries exhibition aluminum profiles and precision machining. With profiles modern production lines and advanced technology, Use for: Industrial purposes we are capable of producing high quality and diverse products, which meet the highest standards set by Minimum lot: 300 customers. Material: Aluminum alloy COMPANY PROFILE ESTABLISHMENT YEAR: 2013 Product name: Aluminum frame Use for: Conveyor, machine NUMBER OF EMPLOYEES: 142 frame, billboard frame, FACTORY ADDRESS: Yen Phong Industrial Park, Yen Phong expo frame, trolley Dist., Bac Ninh Province frame FACTORY AREA (M²): 21,000 Minimum lot: 300 Material: Aluminum alloy CHARTER CAPITAL (USD): 3,600,000 INCOME OF NEAREST YEAR (USD): 6,700,000 Product name: Aluminum heat sink MAIN TECHNOLOGY: Extrusion, Machining (Precision) Use for: Industrial purposes MAIN CUSTOMERS: KMW, M&C, Eurowindow, Oristar, Minimum lot: 300 Rhythm Precision... Material: Aluminum alloy QUALITY CERTIFICATES: ISO 9001:2015, ISO 14001:2015, NTR 16:2014/BXD, JIS H4100:2006, EN 755-9:2008 Product name: Aluminum equipment for vehicle CONTACT INFORMATION Use for: Aluminum parts for PERSON IN CHARGE: Mr. TRAN DANG KHOA bicycle, motor bike, car POSITION: Sales Executive Minimum lot: 300 OFFICE ADDRESS: Yen Phong Industrial Park, Yen Phong Material: Aluminum alloy Dist., Bac Ninh Province Product name: Aluminum Engine shell TEL: +84-24-3795-7410 Use for: Industrial purposes FAX: +84-24-3795-7412 Minimum lot: 300 EMAIL: [email protected] Material: Aluminum alloy WEBSITE: http://kimsen.com.vn/

KYODAI MANUFACTURE JSC VN 20 Kyodai JSC has a factory in Thach Khoi industrial SELLING ITEMS zone, Hai Duong is a company that manufactures high Product name: Jig,fixture,molds… precision mechanical fittings in electronic companies Use for: Manufacturing for such as jigs, fixtures, molds. Customer satisfaction is electronic… our business criteria. Minimum lot: 1->10.000 Material: SUS304,SKD11,A6061… COMPANY PROFILE Product name: Molds ESTABLISHMENT YEAR: 2011 Use for: Manufacturing for NUMBER OF EMPLOYEES: 30 electronics FACTORY ADDRESS: Industrial Park 1,Thach Khoi, Minimum lot: 4 Hai Duong City, Hai Duong Province Material: S45C FACTORY AREA (M²): 2,500 CHARTER CAPITAL (USD): 820,000 Product name: Jig,fixture INCOME OF NEAREST YEAR (USD): N/A Use for: Manufacturing for MAIN TECHNOLOGY: PVC products moulding,jig,fixture… electronics 2,000 MAIN CUSTOMERS: N/A Minimum lot: Material: A6061 QUALITY CERTIFICATES: ISO 9001-2008 ,5S

Product name: Plastic molds CONTACT INFORMATION Use for: Industrial electricity

PERSON IN CHARGE: Mr. NGUYEN QUANG VU Minimum lot: 5 POSITION: CEO Material: 855c OFFICE ADDRESS: Industrial Park 1,Thach Khoi, Hai Duong City, Hai Duong Province Product name: Insert TEL: +84-22-0361-0079 Use for: Manufacturing for FAX: N/A electronics EMAIL: [email protected] Minimum lot: 200 WEBSITE: kyodai.com.vn Material: SUS304

VIETNAMESE COMPANY 41 VN 21 MANH QUANG CO.,LTD Established in 1983, Manh Quang Co.,Ltd specializing SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition in all kind of sprocket, gears, shafts and spindle, Product name: Cold forging bevel mechanical parts for vehicles, forklifts, agriculture Gear machine and others industries with 100% process Use for: Agricutural Machine in house. Beside that we also do cold forging, lathe, machining, 4 axis, 5 axis, grinding, hob, heat Minimum lot: 10,000 treatment service. Material: SCM415, SCM 420 COMPANY PROFILE Product name: Gear ESTABLISHMENT YEAR: 1983 Use for: Motorcycle NUMBER OF EMPLOYEES: 250 FACTORY ADDRESS: 924 Kim Giang street, Thanh Liet, Minimum lot: 500 Thanh Tri Ward, Hanoi, Vietnam Material: SCM415 FACTORY AREA (M²): 27,000 CHARTER CAPITAL (USD): 4,500,000 INCOME OF NEAREST YEAR (USD): 10,000,000 Product name: Ratchet gear MAIN TECHNOLOGY: Press,Stamping Dies,Machining Use for: Motorcycle (Ordinary) ,Machining (Precise),Sheet Minimum lot: 5,000 Metal (Ordinary),Casting,Forging, Material: Steel Surface Treatment (electroplating, coating),Heat Treatment MAIN CUSTOMERS: Honda Vietnam, Sumitomo Nacco, FCC Product name: Spindle QUALITY CERTIFICATES: 9001-2008 Use for: Motorcycle CONTACT INFORMATION Minimum lot: 500 PERSON IN CHARGE: Mr. NGUYEN MANH QUANG Material: Steel POSITION: CEO OFFICE ADDRESS: 924 Kim Giang street, Thanh Liet, Product name: Cold forging part Thanh Tri Ward, Hanoi, Vietnam Use for: Vehicle, other industry TEL: +84-24-3688-3376 10,000 FAX: +84-24-3688-3378 Minimum lot: EMAIL: [email protected] Material: Steel WEBSITE: www.manhquang.com

VN 22 MANUTRONICS VIETNAM JSC ManuTronics Vietnam JSC., Address: No 7, TS5 SELLING ITEMS roads, Tienson Industrial zone, Bacninh, Vietnam. Product name: Compact Disc Establishment: March, 2003Type of busines: 100% Use for: User software and Vietnamese – owned Main product : Optical disc, Manual for OEM Cable, Electronic assembly. Minimum lot: 500 Material: Polycarbonate, Aluminum COMPANY PROFILE Product name: USB cable ESTABLISHMENT YEAR: 2003 Use for: Computer, Printer, NUMBER OF EMPLOYEES: 180 FAX, ... FACTORY ADDRESS: No.7, TS5 road, Tien Son IZ, Hoan Son Minimum lot: 1 commnue, Tien Du district, Bac Ninh Material: Cable, PVC, connector,... FACTORY AREA (M²): 10,000 CHARTER CAPITAL (USD): 10,000,000 Product name: PCBA INCOME OF NEAREST YEAR (USD): 14,600,000 Use for: Mobile phone, MAIN TECHNOLOGY: Electronic / Electrical Components / Automotive, ... Electric Control,Others Minimum lot: N/A MAIN CUSTOMERS: Compact Disc (Canon, Brother, Samsung, Material: PCB, E-compoment Fujixerox, Panasonic, ...); PCB Assembly (Triom, Flexstar, CSR, RFT, Samsung, ...) QUALITY CERTIFICATES: ISO9001:2008, ISO14000:2008 Product name: PCBA CONTACT INFORMATION Use for: Mobile phone, Automotive, ... PERSON IN CHARGE: Mr. TRAN NGOC LINH Minimum lot: N/A POSITION: Director Material: PCB, E-compoment OFFICE ADDRESS: No.7, TS5 road, Tien Son IZ, Hoan Son commnue, Tien Du district, Bac Ninh Product name: PCBA TEL: +84-22-2371-0499 Use for: Mobile phone, FAX: +84-22-2371-0233 Automotive, ... EMAIL: [email protected] Minimum lot: N/A WEBSITE: http://www.manutronics.vn Material: PCB, E-compoment

42 VIETNAMESE COMPANY PHAN LE BAO VIET NAM TECHNOLOGY CO.,LTD VN 23 PHAN LE BAO VIET NAM TECHNOLOGY is production SELLING ITEMS

professional jigs, automation machine, conveyor. Product name: Jig SUS 304 VIETNAM - JAPAN - Supporting industries exhibition Use for: Speaker Minimum lot: 1 Material: SUS304

COMPANY PROFILE Product name: Robot 3 axis machine ESTABLISHMENT YEAR: 2014 Use for: Mobile

NUMBER OF EMPLOYEES: 85 Minimum lot: 1 FACTORY ADDRESS: An Khanh, hoai Duc, Ha noi Material: Steel FACTORY AREA (M²): 4,000 CHARTER CAPITAL (USD): 200,000 Product name: 3D printer machine INCOME OF NEAREST YEAR (USD): N/A Use for: Printer MAIN TECHNOLOGY: Jigs, Automation machine, Conveyor Minimum lot: 1 MAIN CUSTOMERS: N/A Material: Aluminum QUALITY CERTIFICATES: N/A

CONTACT INFORMATION PERSON IN CHARGE: Ms PHAN VAN ANH POSITION: CEO OFFICE ADDRESS: Bt4.07, Viglacer Xuan Phuong, Xuan Phuong, Tu Liem South, Ha Noi TEL: +84-24-6253-1188 FAX: N/A EMAIL: [email protected] WEBSITE: lbtechvina.com.vn

SEIKI INNOVATIONS VIETNAM CO.,LTD VN 24 SEIKI is mechanical manufacture professional SELLING ITEMS supplying of ancillary industries especially in Product name: Sheet metal 2 precision engineering for sheet metal parts, stamping Use for: Electronic / Electric and metal bars. Our products supply in many areas: components machinery, electronics, electrical, construction, medical industry, food industry... We provide a Minimum lot: 1 variety of enclosures with various finishes. Material: N/A COMPANY PROFILE Product name: Stamping parts ESTABLISHMENT YEAR: 2015 Use for: Electronic / Electric NUMBER OF EMPLOYEES: 60 components FACTORY ADDRESS: Road D2, Dai Dong - Hoan Son IP, Bac Ninh Minimum lot: 1,000 FACTORY AREA (M²): 2,000 Material: N/A CHARTER CAPITAL (USD): 300,000 INCOME OF NEAREST YEAR (USD): 950,000 Product name: Machine frame MAIN TECHNOLOGY: Sheet Metal, Press, Punching, Bending, Use for: Machine and other Welding, Coating, Electronic / Electrical industry Components / Electric Control, Assembling Minimum lot: 1 Construction Equipment, Jig / Equipment Material: N/A MAIN CUSTOMERS: Japanese manufacture QUALITY CERTIFICATES: ISO 9001:2008 Product name: Machine cover CONTACT INFORMATION Use for: Machine and other industry PERSON IN CHARGE: Mr. HOANG VAN TRUONG Minimum lot: 1 POSITION: Sales Manager Material: N/A OFFICE ADDRESS: Road D2, Dai Dong - Hoan Son IP, Bac Ninh Product name: Electric and control box TEL: +84-22-2384-8186 Use for: Electric and other FAX: +84-22-2384-8166 industry EMAIL: [email protected] Minimum lot: 1 WEBSITE: http://seiki.vn/jp/ Material: N/A

VIETNAMESE COMPANY 43 VN 25 SEIKICO PRECISION MECHANICAL CO.,LTD “SEIKICO PRECISION MECHANICAL CO.,LTD is a SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition supporting industry for precision mechanical Product name: Precision Pin parts for vary industries. We are specialized Use for: Jig and Mold in manufacturing small parts for industries. We are continuously improving our capability to Minimum lot: 50 meet the hardest to please customers requirements. Material: SKD11, SKD61, S45C, All of our efforts is to make you smile! SUS COMPANY PROFILE Product name: Colar ESTABLISHMENT YEAR: 2010 Use for: Electricity bike NUMBER OF EMPLOYEES: 60 Minimum lot: 100 FACTORY ADDRESS: Lot A2CN1, Minhkhai IZ, Bac Tuliem, Material: Plastic Hanoi, Vietnam (POM, PE, Teplon,…) FACTORY AREA (M²): 1,700 CHARTER CAPITAL (USD): 500,000 Product name: Special screws INCOME OF NEAREST YEAR (USD): 1,900,000 Use for: Machine, Jig MAIN TECHNOLOGY: Metal parts, pin, screws, piston, Minimum lot: 100 shaft,… Material: SUS303, SUS304, MAIN CUSTOMERS: N/A SUS430J2,… QUALITY CERTIFICATES: ISO 9001-2008

CONTACT INFORMATION PERSON IN CHARGE: Mr. GIAO THANH SON POSITION: CEO OFFICE ADDRESS: Lot A2CN1, Minhkhai IZ, Bac Tuliem, Hanoi, Vietnam TEL: +84-24-3780-5205, +84-985-472-963 FAX: N/A EMAIL: [email protected] WEBSITE: www.seikico.net

VN 26 SHENGLI VN CO., LTD SHENGLI VN INTERNATIONAL TRADING PRODUCTION SELLING ITEMS COMPANY LIMITED was established in 2000. Main Product name: Rubber sean products are OEM parts of motorcycle by EPDM Use for: Manufacturing for rubber, NBR synthetic rubber, NBR / PVC, CR foam motorcyle,office rubber, CR / SBR, etc. equipment and home Minimum lot: 5,000 -> 10,000 Material: Silicon, Rubber COMPANY PROFILE Product name: Damper seat/ Gasket ESTABLISHMENT YEAR: 2000 Use for: Manufacturing for NUMBER OF EMPLOYEES: 220 motorcyle,automobile and FACTORY ADDRESS: Lot D9-D10, Dinh Tram Industrial Zone, construction equipment Bac Giang province Minimum lot: 10,000 FACTORY AREA (M²): 10,000 Material: Rubber CHARTER CAPITAL (USD): 10,000,000 Product name: Tube Air, Duct INCOME OF NEAREST YEAR (USD): N/A Use for: Manufacturing for motorcyle, MAIN TECHNOLOGY: Main products are OEM parts of automobile motorcycle and automobile with Minimum lot: 10,000 material from rubber and plastic. Material: PVC, Plastic MAIN CUSTOMERS: N/A QUALITY CERTIFICATES: ISO 9001-2008 Product name: Oring Use for: Manufacturing for CONTACT INFORMATION motorcyle,office PERSON IN CHARGE: Ms. HOANG THU NGOC equipment and home POSITION: Director Minimum lot: 5,000 -> 10,000 OFFICE ADDRESS: Lot D9-D10, Dinh Tram Industrial Zone, Material: Silicon, Rubber Bac Giang province Product name: Tube Air, Duct TEL: +84-9-4366-6638 Use for: Manufacturing for FAX: +84-20-4366-1918 motorcyle,automobile EMAIL: [email protected] Minimum lot: 10,000 WEBSITE: www.shenglivietnam.com Material: PVC, Plastic

44 VIETNAMESE COMPANY SMART VIETNAM PRECISION MECHANICAL JSC VN 27 We are proud to be prestige and professional SELLING ITEMS

provider with many products such as: Mold, plastic Product name: Mold for plastic VIETNAM - JAPAN - Supporting industries exhibition injection mold and Sheet metal fabrication products injection for domestic and foreign partners with high quality. Use for: Plastic injection Our mission is giving to customers the products with high precision, optimal technical and perfect service Minimum lot: 1 quality. Material: Starvax, Nak80, P20,... COMPANY PROFILE Product name: Fittings ESTABLISHMENT YEAR: 2016 Use for: Plastic injection NUMBER OF EMPLOYEES: 65 molding, Stamping FACTORY ADDRESS: Lot E7, Dong Tho Industrial Zone, Yen Dies Phong District, Bac Ninh Province, Vietnam Minimum lot: 1 FACTORY AREA (M²): 3,200 Material: Starvax, Nak80,HPM31 CHARTER CAPITAL (USD): 1,000,000 Product name: Sheet metal parts INCOME OF NEAREST YEAR (USD): 1,500,000 Use for: Assembling (Office MAIN TECHNOLOGY: Plastic injection molding, machining, Automation Equipment) Sheet metal,... Minimum lot: 1 MAIN CUSTOMERS: Nissei, FMV, Mitsuba, Hamaden, SAV, Material: SS400, SUS304,A5052, NSVH,... A6061 QUALITY CERTIFICATES: ISO 9001:2015, ISO 14001:2015, 5S Product name: Tool cabinets Use for: Machining CONTACT INFORMATION Minimum lot: 1 PERSON IN CHARGE: Mr. NGUYEN HUY DU Material: SS400, SUS201, POSITION: Sales Manager SUS304,... OFFICE ADDRESS: Lot E7, Dong Tho Industrial Zone, Yen Phong District, Bac Ninh Province, Vietnam Product name: Jig TEL: +84-222-388-3129 Use for: test product, assemble FAX: +84-222-388-3128 the product EMAIL: [email protected] Minimum lot: 1 WEBSITE: http://smartpm.com.vn/ Material: S55C, SKD11,S45C,...

SUNPLA JSC VN 28 Sunpla was established on Jan 5, 2012 in Dinh Tram, SELLING ITEMS Bac Giang. Our factory is equipped with modern Product name: Plastic gears equipment and machines. Main business scopes: Use for: Printer, Parameter designing, manufacturing mold, die and engineering plastic products, precise plastics, maintaining and Minimum lot: 2,000 repairing molds, importing and exporting plastic Material: POM materials. Our main customers are Canon, Tenma, Nidec, Nissei Technology, Panasonic... COMPANY PROFILE Damper seat/ Gasket ESTABLISHMENT YEAR: 2012 Product name: Plastic parts Manufacturing for NUMBER OF EMPLOYEES: 170 Use for: Printer, Telecom, motorcyle,automobile and FACTORY ADDRESS: Lot E1-E2, Dinh Tram IZ, Hoang Ninh, Automotive, Medical construction equipment Viet Yen, Bac Giang Minimum lot: 5,000 FACTORY AREA (M²): 10,000 Material: ABS, HIPS, PC, PBT, CHARTER CAPITAL (USD): 672,000 LCB, PS, PA INCOME OF NEAREST YEAR (USD): 1,500,000 Product name: Mold Die MAIN TECHNOLOGY: Plastic Molding (Injection Molding / Use for: Injection molding, Press Vacuum Molding / Blow Molding / 1 Extrusion),Plastic Injection Minimum lot: S50C, S55C, SCM440, P20, Molding,Assembling (Others),Jig / Material: NAK55, NAK80, SKD11, Equipment,Others SKS3, SKS93, SK3, SK4 MAIN CUSTOMERS: Canon Vietnam, Nissei Technology, Product name: Mold Parts Rhythm, Nidec, Tenma, ToyoDenso QUALITY CERTIFICATES: ISO 9001-2015, ISO 14001-2015 Use for: For Mold Die Minimum lot: 1 CONTACT INFORMATION Material: S50C, S55C, SCM440, P20, PERSON IN CHARGE: Mr. NGUYEN DUC CUONG NAK55, NAK80, SKD11, POSITION: Sales Manager SKS3, SKS93, SK3, SK4 OFFICE ADDRESS: Lot E1-E2, Dinh Tram IZ, Hoang Ninh, Product name: Screw Head Set Viet Yen, Bac Giang TEL: +84-24-0366-2288 Use for: Injection Molding FAX: +84-24-0366-2266 Minimum lot: 1 EMAIL: [email protected] Material: SKD61, DPS400, WEBSITE: www.sunpla.com.vn DPS570X,SK

VIETNAMESE COMPANY 45 VN 29 T&C VIETNAM CO.,LTD T&C Vietnam specializes in surface treatment: Zinc SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition Plating, Crom Plating, Niken Plating, Phosphate. T&C Product name: Titan hanger Vietnam use measure of strict overall quality control Use for: Nikel; Chrome line to finish building ISO 9001-2008 and 14001 system. “Commit customer-oriented quality” is strategy Minimum lot: 1 guideline and aim in developing process of T&C Vietnam Material: Titan in present and future. COMPANY PROFILE Product name: Zn plating ESTABLISHMENT YEAR: 2010 Use for: Surface Treatment NUMBER OF EMPLOYEES: 40 Minimum lot: 1 FACTORY ADDRESS: Duc Noi Hamlet, Viet Hung Commune, Material: Chemical Zinc Dong Anh District, Ha Noi FACTORY AREA (M²): 2,500 CHARTER CAPITAL (USD): 1,000,000 Product name: Roller plating line INCOME OF NEAREST YEAR (USD): 300,000 ( auto) MAIN TECHNOLOGY: Surface Treatment (electroplating, Use for: Surface Treatment coating) Minimum lot: 1 MAIN CUSTOMERS: SHOWA, KYB, HASHIMA, JEIL-TECH Material: Zinc, NaOH, Acid, .... QUALITY CERTIFICATES: ISO9001-2008/14001 Product name: Phosphate CONTACT INFORMATION Use for: Surface treatment ( forming) PERSON IN CHARGE: Ms. DANG HAU Minimum lot: 1 POSITION: Sales Excutive Material: Chemical/ phosphate OFFICE ADDRESS: Duc Noi Hamlet, Viet Hung Commune, ( zinc, Fe) Dong Anh District, Ha Noi, Viet Nam Product name: Copper plating TEL: +84-24-3748-0889 Use for: Surface treatment FAX: +84-24-3748-0899 Minimum lot: 1 EMAIL: [email protected] Material: Copper WEBSITE: http://tcvietnam.vn

VN 30 TAN PHAT AUTOMATION JSC Tanphat Automation JSC (TPA) focused design, SELLING ITEMS manufacturing and supplying equipment and system Product name: Robotics Application for Industry and Training. We have a skilled design Use for: Assembly System, team to provide solution, customized machine and Machine Tending, Pick tool in many fields of factory automation. Our goal and Place, Packing, is improbable quality, productivity with reasonable Palettizing price, committed delivery schedule. Minimum lot: 1 Material: N/A COMPANY PROFILE Product name: Factory Automation ESTABLISHMENT YEAR: 2006 Solutions NUMBER OF EMPLOYEES: 165 Use for: Parts Feeding, Sorting, FACTORY ADDRESS: No 168, Phan Trong Tue Road, Thanh Liet Assembly, Measuring, Ward, Thanh Tri Dist, Ha Noi, Viet Nam Conveyor FACTORY AREA (M²): 1,500 Minimum lot: 1 CHARTER CAPITAL (USD): 400,000 Material: N/A INCOME OF NEAREST YEAR (USD): 5,100,000 Product name: Vision Applications MAIN TECHNOLOGY: Machining (Ordinary) ,Machining Use for: Automated Optical (Precise),Industrial Goods (Industrial Inspection, Barcode/ machine / conveyance equipment) , QR Code Reading Jig / Equipment Minimum lot: 1 MAIN CUSTOMERS: Canon, Denso, SEEV, SEI, ToyodaGosei, Material: N/A Toyota, Samsung Electronic, Samsung Product name: Machines Display, LG Use for: Automated Process QUALITY CERTIFICATES: ISO 9001:2008, CE 12601:2001 Production CONTACT INFORMATION Minimum lot: 1 PERSON IN CHARGE: Mr. NGUYEN TRONG THUONG Material: N/A POSITION: Vice Director OFFICE ADDRESS: No 168, Phan Trong Tue Road, Thanh Liet Product name: Universal Robots Ward, Thanh Tri Dist, Ha No, Viet Nam TEL: +84-24-3685-7776 Use for: Collaborative Robots FAX: +84-24-3685-7775 Minimum lot: 1 EMAIL: [email protected] Material: N/A WEBSITE: www.tpa.com.vn

46 VIETNAMESE COMPANY TECHNOKOM JSC VN 31 TECHNOKOM JSC., specializes in manufacturing of SELLING ITEMS

motorcycles, auto parts and machining parts.The main Product name: Stand Comp Main VIETNAM - JAPAN - Supporting industries exhibition products:the products of pressing, welding, polishing Use for: Motorcycle parts and machining,...with our staff of the highly qualified personnel, experienced and equipped with advanced Minimum lot: 1,000 machines TECHNOKOM has been a prestigious and Material: STAM290GA, reliable partner of the leading companies in automotive STAM390G, SPHC and motorcycles manufacturing in Vietnam. COMPANY PROFILE ESTABLISHMENT YEAR: 2010 Product name: Muffler Cover Protector Use for: Motorcycle parts NUMBER OF EMPLOYEES: 390 Minimum lot: 1,000 FACTORY ADDRESS: Tan Quang Industrial Zone, Van Lam Material: SUS304- BA; SPCC-SB District, Hung Yen, VietNam FACTORY AREA (M²): 4,500 CHARTER CAPITAL (USD): 1,650,000 INCOME OF NEAREST YEAR (USD): 10,000,000 Product name: Parts for Muffler MAIN TECHNOLOGY: Pressing, Welding Exhaust (Robot,MIG,TIG,MAG,Welding), Polishing Use for: Motorcycle parts MAIN CUSTOMERS: Goshi-Thanglong, BBSV, TSVN, Minimum lot: 1,000 SENTEC, ICSN Group (USA), ITP Group Material: SUS409L (Norway),... QUALITY CERTIFICATES: ISO 9001-2008 Product name: Stay Comp Muff Use for: Motorcycle parts CONTACT INFORMATION Minimum lot: 1,000 PERSON IN CHARGE: Mr. DINH XUAN SON Material: SPHC POSITION: Director OFFICE ADDRESS: Tan Quang Industrial Zone, Van Lam District, Hung Yen, VietNam Product name: Stainless Steel Sofa Leg TEL: +84-22-1379-1750 FAX: +84-22-1379-1751 Use for: Parts for Furniture EMAIL: [email protected] Minimum lot: 2,000 WEBSITE: www.technokom.com.vn Material: SUS304, SUS201

THINH HUNG CASTING CO.,LTD VN 32 As a factory constantly improve, enhance the prestige SELLING ITEMS and quality of products. The focus is: “For our Product name: Valve body beloved customers.” With the goal “GOOD QUALITY, Use for: To Use For The Ship GOOD PRICE, GOOD SERVICE” Minimum lot: N/A Material: FC 200

COMPANY PROFILE Product name: Pump Body 136 ESTABLISHMENT YEAR: 2000 Use for: To Use For Punping NUMBER OF EMPLOYEES: 150 Water

FACTORY ADDRESS: Hamlet 7 (industrial site) of Kien Bai Minimum lot: N/A Commune, Thuy Nguyen District, Material: FC 200 Hai Phong City FACTORY AREA (M²): 12,000 CHARTER CAPITAL (USD): 400,000 Product name: Sewing machine Use for: To Assemble For INCOME OF NEAREST YEAR (USD): 3,358,000 Sewing Machine MAIN TECHNOLOGY: Machining (Ordinary) ,Machining Minimum lot: N/A (Precise),Casting Material: FC 150 MAIN CUSTOMERS: Pagasus,Shinyei, Showa valve, KNC QUALITY CERTIFICATES: ISO 9001:2008 Product name: Sewing machine CONTACT INFORMATION Use for: To Assemble For PERSON IN CHARGE: Ms. BUI THI THUY Sewing Machine POSITION: HR.MANAGER Minimum lot: N/A OFFICE ADDRESS: Hamlet 7 (industrial site) of Kien Bai Material: FC 150 Commune, Thuy Nguyen District, Hai Phong City Product name: Balance weight TEL: +84-22-5628-3550 Use for: To Use For High Voltage FAX: N/A Power Line EMAIL: [email protected] Minimum lot: N/A Material: FC 200 WEBSITE: ducthinhhung.com

VIETNAMESE COMPANY 47 VN 33 VAN XUAN CO.,LTD Van Xuan Co.Ltd is a maker of molds and tools.Our SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition products are supplying to Japanese companies as Product name: Hot forging mold for FUJITA, KYOEI, and European companies as ABB, motorbike connecting rod WIHA. Our products were met their very high quality requirements.We always innovate technology, Use for: Hot forging parts improve managing production following ISO9001- Minimum lot: 1 2008 and 5S, train staff to satisfy the more and more Material: SKT4 (55NiCrMoV2) higher requirements of customers. COMPANY PROFILE Product name: Stamping Dies ESTABLISHMENT YEAR: 2005 Use for: Stamping Parts NUMBER OF EMPLOYEES: 105 Minimum lot: 1 FACTORY ADDRESS: No. 3 Thong Nhat Street, Cai Dan Ward, Material: SKD11 (9XC) Song Cong City, Thai Nguyen Province FACTORY AREA (M²): 10,000 CHARTER CAPITAL (USD): 750,000 Product name: Presuare casting molds INCOME OF NEAREST YEAR (USD): 2,000,000 MAIN TECHNOLOGY: Rubber Injection Molding,Stamping Use for: Presuare casting parts Dies,Plastic Injection Molding,Machining Minimum lot: 1 (Ordinary) ,Machining (Precise),Heat Material: SKD61 Treatment MAIN CUSTOMERS: FUJITA, FUTU1, ABB, DISOCO, MEINFA, XLDA Product name: Plastic injection molds QUALITY CERTIFICATES: ISO9001-2008 Use for: Plastic injection parts CONTACT INFORMATION Minimum lot: 1 PERSON IN CHARGE: Mr. TRAN VAN MAU Material: P20, S55C POSITION: Technical manager OFFICE ADDRESS: No. 3 Thong Nhat Street, Cai Dan Ward, Song Cong City, Thai Nguyen Province Product name: Parts for verhicle TEL: +84-20-8221-2294 Use for: Manufacturing verhicle FAX: +84-20-8376-2715 Minimum lot: 1 EMAIL: [email protected] Material: S25C WEBSITE: vanxuantools.com

VN 34 VIET AN JSC Viet An Joint Stock Company was established 2008, SELLING ITEMS with an area of 4,400 square meters factory in Phung Product name: Wire Harness Industrial Zone, Dan Phuong District, Hanoi. Use for: Motorbikes 1. More than 85% custormers are japanese companies. (We are able to satisfy quality control of factories ) Minimum lot: 100 2. Competitive price as we are a 100% Vietnamese Material: Wire, housing, invested cpmpany. connectors ... COMPANY PROFILE Product name: Wire Harness ESTABLISHMENT YEAR: 2008 Use for: Motorbikes NUMBER OF EMPLOYEES: 230 Minimum lot: 10 FACTORY ADDRESS: Lot A5, Phung Industrial Zone, Dan Wire, housing, Phuong Dist, Ha Noi, Viet Nam Material: connectors ... FACTORY AREA (M²): 4,400 CHARTER CAPITAL (USD): 1,000,000 Product name: Wire Harness INCOME OF NEAREST YEAR (USD): 4,500,000 Use for: Automobile MAIN TECHNOLOGY: Automatic wire cutting, stripping and Minimum lot: 100 stamping m/cs. Extruders of PVC tubes Material: Wire, housing, for wireharness and other application connectors ... MAIN CUSTOMERS: Piaggio, Asti, Toyodenso, Asahidenso,... QUALITY CERTIFICATES: ISO 9001: 2008; ISO 14001: 2004 Product name: Wire Harness CONTACT INFORMATION Use for: Electronics Minimum lot: 100 PERSON IN CHARGE: Ms. BUI THANH HANG Material: Wire, housing, POSITION: Vice Director connectors ... OFFICE ADDRESS: Lot A5, Phung Industrial Zone, Dan Phuong Dist, Ha Noi, Viet Nam Product name: Wire Harness TEL: +84-24-3363-5443 Use for: Motorbikes FAX: +84-24-3363-5447 Minimum lot: 100 EMAIL: [email protected] Material: Wire, housing, WEBSITE: http://viet-an.vn connectors ...

48 VIETNAMESE COMPANY VIET AU ENGINEERING JSC VN 35 VietAu Engineering Jsc (VEJ) produces cast iron SELLING ITEMS

and steel castings (FC, FCD, alloyed iron and steel). Product name: Drop box VIETNAM - JAPAN - Supporting industries exhibition We operate our foundry no.1 with capacity 2,500T/ Use for: machine year in Hai phong city, equipped by Furan sand line Minimum lot: 100 from Japan, Spectro Lab from Germany, CE meter, Ultrasonic detector, Brinell tester...from Japan. Our Material: FC250 website www.vej.com.vn. Welcome ! COMPANY PROFILE Product name: Guide ESTABLISHMENT YEAR: 2016 Use for: Steel Mill NUMBER OF EMPLOYEES: 45 Minimum lot: 10 FACTORY ADDRESS: Lot CN2A, Namcaukien industrial park, Material: 27Cr Kienbai ward, Thuynguyen district, Haiphong city, Vietnam FACTORY AREA (M²): 2,500 Product name: Guide CHARTER CAPITAL (USD): 1,650,000 Use for: Steel Mill INCOME OF NEAREST YEAR (USD): N/A Minimum lot: 100 MAIN TECHNOLOGY: Casting,Materials (Metal) Material: FD600 MAIN CUSTOMERS: Japan, Europe QUALITY CERTIFICATES: ISO9001:2008 Product name: Inlet housing CONTACT INFORMATION Use for: Water System PERSON IN CHARGE: Mr. NGUYEN VAN NHAN Minimum lot: 100 POSITION: General Director Material: FCD450 OFFICE ADDRESS: Lot CN2A, Namcaukien industrial park, Kienbai ward, Thuynguyen district, Haiphong city, Vietnam Product name: Shaft TEL: +84-22-5883-1099 Use for: Compressor FAX: N/A Minimum lot: 10 EMAIL: [email protected] Material: FCD550 WEBSITE: vej.com.vn

VIET COMPETENCE TECHNOLOGY JSC VN 36 We are operating in the fields: Design and SELLING ITEMS manufacture of machines, automated assembly Product name: Automation machine lines, Jig and fixture, system integration expertise... Use for: Automated process for automotive industrial, electronic industrial, etc... production Minimum lot: 1 Material: Steel, plastic.... COMPANY PROFILE ESTABLISHMENT YEAR: 2010 Product name: Laser Making Machine NUMBER OF EMPLOYEES: 130 Use for: Automated process FACTORY ADDRESS: Lot B2-3-3b, Nam Thang Long Industrial production Zone, Thuy Phuong Ward, Bac Tu Liem Minimum lot: 1 District, Ha Noi City, Vietnam Material: Steel, Plasstic FACTORY AREA (M²): 3,000 CHARTER CAPITAL (USD): 1,000,000 Product name: Automation Assembly INCOME OF NEAREST YEAR (USD): 6,000,000 Machine MAIN TECHNOLOGY: Machining (Precise),Industrial Goods Use for: Automated process (Industrial machine / conveyance production equipment) ,Jig / Equipment Minimum lot: 1 MAIN CUSTOMERS: Denso Viet Nam, Hamaden,... Material: Steel, Plasstic QUALITY CERTIFICATES: ISO 9001-2008 Product name: Automated guided vehicle – AGV CONTACT INFORMATION Use for: Automated process PERSON IN CHARGE: Mr. TRAN VAN NGOC production POSITION: Sales Manager Minimum lot: 1 OFFICE ADDRESS: Lot B2-3-3b, Nam Thang Long Industrial Material: Steel, Plasstic Zone, Thuy Phuong Ward, Bac Tu Liem Product name: Jig, Tools District, Ha Noi City, Vietnam Use for: Automated process TEL: +84-24-3780-5398 production FAX: +84-24-3780-5399 EMAIL: [email protected] Minimum lot: 1 WEBSITE: vicotech.com.vn Material: Steel, Plasstic

VIETNAMESE COMPANY 49 VN 37 VIET HA CO.,LTD Established in 1995, Viet Ha Co., Ltd is specialized in SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition manufacturing and distributing hydraulic cylinders Product name: Hydraulic cylinders and hydraulic system includes: Manufacturing Use for: manufacture of Special Hydraulic Cylinders, Telescopic cylinders, Designing vehical and Industrial and manufacturing of hydraulic system: hydraulic application mini power units. Authorized distributor of hydraulic pumps, valves, motors... Minimum lot: N/A Material: N/A COMPANY PROFILE Product name: Hydraulic mini Power Units ESTABLISHMENT YEAR: 1995 Use for: manufacture of Special NUMBER OF EMPLOYEES: 45 vehical and Industrial FACTORY ADDRESS: D Section, Pho Noi A industrial zone, application Van Lam Dist, Hung Yen Minimum lot: N/A FACTORY AREA (M²): 5,000 Material: N/A CHARTER CAPITAL (USD): 270,000 INCOME OF NEAREST YEAR (USD): 1,200,000 Product name: Telescopic cylinder, MAIN TECHNOLOGY: Machining (Precise),Plant Equipment hydraulic cylinders (For Ship plant / Power plant / Large- Use for: Garbage truck scale plant),Jig / Equipment Minimum lot: N/A MAIN CUSTOMERS: Industrial Application, Brick Material: N/A Manufacturing, Ship, Boat QUALITY CERTIFICATES: Certificate of Approval for Product name: Hydraulic cylinders Manufactures by Vietnam Register CONTACT INFORMATION Use for: Hook lift truck Minimum lot: N/A PERSON IN CHARGE: Mr. NGUYEN DINH HOA Material: N/A POSITION: Director OFFICE ADDRESS: No 62, Alley 6/12 Doi Nhan Street, Vinh Phuc Ward, Ba Dinh Dist, Ha Noi Product name: Press Machine TEL: +84-24-3761-7383 Use for: Press machine FAX: +84-24-3761-2170 Minimum lot: N/A EMAIL: [email protected] Material: N/A WEBSITE: www.vietha.com.vn

VN 38 VIET UC INDUSTRIAL AND COMMERCIAL JSC Viet Uc industrial and commercial Joint stock SELLING ITEMS Company is an enterprise specialized in manufacturing Product name: Punching mold and manufacturing malds serving industries plastic Use for: Component production molds, mold punch, molds of all kinds,…. With modern equipment, professional staff, experience, we are Minimum lot: 10,000 committed to providing quality products, reasonable Material: Metal price, fastest progress. With motto: “The success and satisfaction of our customers is our success” COMPANY PROFILE Product name: Punching Mold ESTABLISHMENT YEAR: 2002 Use for: Production NUMBER OF EMPLOYEES: 50 Minimum lot: 200,000 FACTORY ADDRESS: Km12, 1A Highway, Van Dien Town, Material: Metal Thanh Tri District, Ha Noi City FACTORY AREA (M²): 950 CHARTER CAPITAL (USD): 180,000 Product name: Jig check the product INCOME OF NEAREST YEAR (USD): 1,150,000 Use for: Production MAIN TECHNOLOGY: Stamping Dies,Plastic Injection Mold- Minimum lot: 1 Set ing,Machining (Precise) Material: Metal MAIN CUSTOMERS: JAT company, KAI company, Technokom company, OSAWA, HONDA,... QUALITY CERTIFICATES: ISO9001 Product name: Blow Mold CONTACT INFORMATION Use for: Production Minimum lot: 10,000 PERSON IN CHARGE: Ms. DUONG BICH NGOC Metal POSITION: Staff Material: OFFICE ADDRESS: Km12, 1A Highway, Van Dien Town, Thanh Tri District, Ha Noi City Product name: Plastic in Jection Mold TEL: +84-24-3681-4158 Use for: Component production FAX: +84-24-3681-4158 Minimum lot: 10,000 EMAIL: [email protected] Material: Metal WEBSITE: http://cokhivietuc.com

50 VIETNAMESE COMPANY VN-J PRECISION MECHANICS CORPORATION VN 39 VN-J PRECISION MECHANICS CORPORATION specializes SELLING ITEMS

in the design and manufacture precision mechanical Product name: Procut VIETNAM - JAPAN - Supporting industries exhibition products as jigs, molds, and machines: CNC plasma Use for: CNC cutting cutting machines, Welding machines... With a professional team and synchronous, good quality Minimum lot: 1 machine system, We always try to meet the diverse Material: Metallic demands and satisfaction of our customers. COMPANY PROFILE Product name: Jig ESTABLISHMENT YEAR: 2012 Use for: Assemble line NUMBER OF EMPLOYEES: 65 1 FACTORY ADDRESS: Group Yen Phuc, Bien Giang, Ha Dong, Minimum lot: Ha Noi Material: Metallic FACTORY AREA (M²): 2,000 CHARTER CAPITAL (USD): 3,000,000 INCOME OF NEAREST YEAR (USD): 8,400,000 Product name: Procut (table version) MAIN TECHNOLOGY: Sheet Metal (Precise), Industrial Goods Use for: CNC cutting (Industrial machine / conveyance Minimum lot: 1 equipment), Jig / Equipment, Plastic Material: Metallic Molding (Injection Molding / Vacuum Molding / Blow Molding / Extrusion), Plastic Injection Molding Product name: Jig MAIN CUSTOMERS: Toyota, Honda, Yamaha, Bunka Use for: Electronic assembly QUALITY CERTIFICATES: ISO, DIN, JIS, 5S line CONTACT INFORMATION Minimum lot: 1 PERSON IN CHARGE: Mr. PHAM TRI VI Material: Aluminum POSITION: Sale Manager OFFICE ADDRESS: Group Yen Phuc, Bien Giang, Ha Dong, Product name: Welding Jig Ha Noi Use for: Welding shelves TEL: +84-24-3773-8362 Minimum lot: 1 FAX: +84-24-3773-8364 SKD, SCM440 EMAIL: [email protected] Material: WEBSITE: vn-j.com.vn

YAMAGUCHI VIETNAM JSC VN 40 Yamaguchi Vietnam JSC was founded in February of SELLING ITEMS 2011 and specialized in precision metal processing Product name: Piston and manufacturing. Our vision is to become a leading Use for: zinc molding machine manufacturer of supporting industry in Vietnam. Minimum lot: N/A Material: SKD61

COMPANY PROFILE Product name: Van ESTABLISHMENT YEAR: 2011 Use for: Molding NUMBER OF EMPLOYEES: N/A Minimum lot: N/A FACTORY ADDRESS: No. 2, Lot 3, Lai Xa Industrial Park, Kim SUS316 Chung Commune, Hoai Duc Dist., Hanoi Material: FACTORY AREA (M²): N/A CHARTER CAPITAL (USD): 250,000 Product name: Molded parts INCOME OF NEAREST YEAR (USD): 3,541,377 Use for: Molding MAIN TECHNOLOGY: Mould, Parts, Jigs and tools Minimum lot: N/A MAIN CUSTOMERS: Fujikin, Hoa Phat, Honda look, Material: SKD61 Panasonic, Dawa, Mabuchimotor, Sam Sung, Rhythm,… QUALITY CERTIFICATES: N/A Product name: Aluminum mold CONTACT INFORMATION Use for: Check Product PERSON IN CHARGE: Mr. DO XUAN MINH Minimum lot: N/A POSITION: N/A Material: A7075 OFFICE ADDRESS: 7th Floor, A1-1 A2-2 Building, Le Duc Tho Street, My Dinh 2 Ward, Nam Tu Liem District, Hanoi, Vietnam Product name: Jig TEL: +84-24-6684-4282 Use for: Check product FAX: +84-24-3734-9267 Minimum lot: N/A EMAIL: [email protected] Material: A502 WEBSITE: http://www.yamaguchi.vn/

VIETNAMESE COMPANY 51 VN 41 THUAN THANH ENVIRONMENT JSC We have introduced technology of SANKO SELLING ITEMS

VIETNAM - JAPAN - Supporting industries exhibition CO.,LTD(shizuoka prefecture) which is doing this Product name: Alimium Alloy Ingot business for more than 60 years in japan. Use for: Aluminum material use for die casting Minimum lot: N/A Material: Aluminum Chips, Dross

COMPANY PROFILE Product name: Alimium Alloy Ingot ESTABLISHMENT YEAR: 2009 Use for: Aluminum material use NUMBER OF EMPLOYEES: 300 for casting FACTORY ADDRESS: Ngoc Kham Village, Gia Dong Commune, Minimum lot: N/A Thuan Thanh Dist., Bac Ninh Province Material: Aluminum Chips, Dross FACTORY AREA (M²): 129,600 CHARTER CAPITAL (USD): 9,000,000 INCOME OF NEAREST YEAR (USD): N/A MAIN TECHNOLOGY: Materials(Metal) MAIN CUSTOMERS: Sam Sung, Honda Trading, Honda VN QUALITY CERTIFICATES: ISO 14001:2004, OHSAS 18001:2007

CONTACT INFORMATION PERSON IN CHARGE: Mr. MITSUI MOTOJI POSITION: Sales Officer OFFICE ADDRESS: Ngoc Kham Village, Gia Dong Commune, Thuan Thanh Dist., Bac Ninh Province TEL: +84-222-377-4886 FAX: +84-222-377-4899 EMAIL: [email protected] WEBSITE: http://thuanthanhenco.com/vn

52 VIETNAMESE COMPANY JAPAN INTERNATIONAL COOPERATION AGENCY (JICA ) ORGANIZATION

Since joining the Colombo Plan in 1954, Japan has been providing financial and technical assistance to VIETNAM - JAPAN - Supporting industries exhibition developing countries through ODA. JICA is in charge of Japanese ODA such as technical cooperation.

ORGANIZATION ACTIVITIES 1. JICA’s activities for SME/SI development in Vietnam 2. JICA’s activities for Japanese enterprises to solve development JICA is supporting the development of Small and Medium Enterprises issues of Vietnam (SMEs) and Supporting Industries (SIs) which is one of the essential JICA has started new ODA program - Japanese Enterprises Proposing issues for the achievement of promotion of economic growth and Program. Through this program, JICA supports Japanese enterprises international competitiveness of Vietnam. expanding their businesses in Vietnam and& , as a result, JICA expects the process of solving development challenges/issues in Vietnam will A) Industrial human resources development be accelerated. B) Establishment of skill testing system C) Lectures for Vietnamese companies on Japanese business A) Basic survey management B) Feasibility Survey for the private sector for utilizing D) Manufacturing technique transfer to Vietnamese companies Japanese technologies in ODA project E) Improving Foreign Direct Investment policies C) Preparatory Survey for Sustainable Development Goals (SDGs) D) Verification Survey with the private sector for dissemination Japanese technologies E) Collaboration Program with the Private Sector for Disseminating Japanese Technology

CONTACT INFORMATION JICA Viet Nam Office JICA Viet Nam Office Ho Chi Minh City Branch Website 11th Floor, CornerStone Building, 16 No. 905, 9th Floor, Saigon Riverside Office http://www.jica.go.jp/vietnam/index. Phan Chu Trinh Street, Hoan Kiem Center, 2A-4A Ton Duc Thang Street, Ben Nghe html District, Hanoi Ward, District 1, Ho Chi Minh City E-mail Tel: +84-24-3831-5005 Tel: +84-28-3827-4942 Fax: +84-24-3831-5009 Fax: +84-28-3827-4943 [email protected]

VIETNAM TRADE PROMOTION AGENCY (VIETRADE ) ORGANIZATION

VIETRADE is a Governmental organization under the Ministry of Industry and Trade responsible for the promotion of trade and investment, boosting industry and trade development in Vietnam. VIETRADE works closely with various local trade promotion centers, trade associations, trade support institutions and international trade promotion organizations in helping domestic and foreign enterprises to establish and expand their business.

CONTACT INFORMATION

HA NOI HEAD OFFICE EXPORT PROMOTION CENTER DA NANG CITY OFFICE 20 Ly Thuong Kiet Str., Hanoi 20 Ly Thuong Kiet Str., Hanoi 132 Nguyen Chi Thanh Str., Da Nang Tel: +84-24-3934-7628 Tel: +84-24-393-4792 Tel: +84-236-3384-3443 Fax: +84-24-3934-8142 Fax: +84-24-393-4793 Fax: +84-236-3384-3442 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

VIETRADE OFFICE IN NEW YORK HO CHI MINH CITY OFFICE VIETRADE OFFICE IN CHONGQING 545 Fifth Avenue, Level 9, 12 Nguyen Thi Minh Khai St., No.10, 12th floor, Fuli Haiyang Guoji Building, Suite 1109, NY 10017, USA Da Kao Ward, Dist.1, Ho Chi Minh City Beichengtian Road, Jiangbei District, Tel: +1-21-2868-2686 Tel: +84-28-3829-7282 Chongqing City, China Fax: +1-21-2868-2687 Fax: +84-28-3914-0549 Tel: +86-23-6790-6219 E-mail: [email protected] E-mail: [email protected] Fax: +86-23-6790-8285 E-mail: [email protected]

INFORMATION TECHNOLOGY AND COMMUNICATION TELEVISION CENTER INVESTMENT PROMOTION CENTER FOR E-COMMERCE DEPARTMENT OF INDUSTRY AND TRADE INDUSTRY AND TRADE 7th floor, MOIT building, 20 Ly Thuong Kiet Str., Hanoi 20 Ly Thuong Kiet Str., Hanoi 655 Pham Van Dong Str., Hanoi Tel: +84-24-3824-5959 Tel: +84-24-3826-2266 Tel: +84-24-6686-6815 Fax: +84-24-3936-1311 Fax: +84-24-3826-2255 +84-24-6686-6819 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

ORGANIZATION 53 ORGANIZATION JAPAN EXTERNAL TRADE ORGANIZATION (JETRO )

Japan External Trade Organization is a Governmental-related Organization under the Ministry VIETNAM - JAPAN - Supporting industries exhibition of Economy, Trade and Industry of Japan (METI). With about 40 regional offices throughout Japan and over 70 overseas offices in the world, JETRO’s main function is to promote mutual trade and investment between Japan and the rest of the world. In the 21st century, JETRO has shifted toward strengthening foreign direct investment (FDI) into Japan and helping Japanese firms, especially SMEs expand their businesses into overseas markets. With the aim of contributing to further development of economic relations between Vietnam and Japan and to the achievement of the prosperity in the region, the Representative Office in Hanoi has been conducting and involving in many various activities that brought mutual benefits to entrepreneurs of the two countries since its establishment in 1993.

ORGANIZATION ACTIVITIES

Offer expert consultation with the latest legal writings and information relating to tax, customs, labor and investment procedures to Japanese investors who wish to invest or do business in Vietnam. Receive Japanese study missions to Vietnam for investment and business opportunities in Vietnam. Provide Japanese investors particularly SMEs with office space and facilities free of charge to promote their business and investment in Vietnam. Hold business matching between Japanese and Vietnamese enterprises in various fields. Organize an exhibition on supporting industries to match Japanese buyers with Vietnamese sellers. Hold workshops guiding new laws and regulations on Vietnam’s business and investment issues for existing Japanese enterprises who are operating in Vietnam. React to inquiries from local and Japanese companies seeking information about potential partners. Create business chances for Vietnamese importers by inviting them to visit specialized trade fairs and production bases in Japan in fields of foodstuff, beverage, agriculture and supporting industries. Make a comparative survey of investment-related costs in major cities in the region and in Asia every year. Conduct an annual survey of current operation of the Japanese-affiliated firms in Asia and Oceania.

CONTACT INFORMATION

JETRO HANOI OFFICE JETRO HO CHI MINH OFFICE Website 9F, Corner Stone Building, 16 Phan Chu Trinh, Floor 14, Sun Wah Tower, 115 Nguyen Hue Str., http//:www.jetro.go.jp Hoan Kiem Dist., Hanoi City, Vietnam Dist.1, Ho Chi Minh City, Vietnam Tel: +84-24-3825 0630 Tel: +84-28-3821 9363 Fax: +84-24-3825 0552 Fax: +84-28-3821 9362 E-mail: [email protected] E-mail: [email protected]

54 ORGANIZATION