THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit EMBEDDED SOLUTIONS RISC Architecture MB911xx Series Starterkit MB91100 MB91360 Series Starterkit MB91360 FR Series Software Support 32 BIT RISC FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS MICROCONTROLLERS & FR-V Series Introduction to Graphic Display GRAPHIC CONTROLLERS Controllers MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools

▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit INTRODUCTION TO FR SERIES - RISC Architecture MB911xx Series 32 BIT RISC ARCHITECTURE

Starterkit MB91100 The Fujitsu RISC (FR) architecture is a new generation 32 bit microprocessor MB91360 Series core which is dedicated to resolving the twin demands of high performance Starterkit MB91360 coupled with low cost, which are needed by today’s high-end automotive, consumer and telecoms applications. FR Series Software Support Designed from the outset to be optimised for embedded applications, the FR Series In-Circuit Emulator CPU has a 16 bit instruction Op Code, enabling maximum performance from low REALOS, OSEK/VDX & EMBOS cost, half word external memory and instruction cache widths, or else allowing FR-V Series double instruction fetches for each bus cycle. The CPU employs the same five-stage pipeline and 32 x 32 Multiplier as the successful SPARClite family but Introduction to Graphic Display adds a new barrel shifter and a bit search unit which finds the first 1, 0 or Controllers change in a data word in a single cycle. The concept of the instruction cache MB86290A ‘Cremson’ architecture with its flexible locking mechanism is also replicated. MB86291 ‘Scarlet’ The CPU has eight dedicated 32 bit registers: program counter, processor MB86292 ‘Orchid’ status, interrupt table base register, return pointer, supervisor and user stack MB87J2120 ‘Lavender’ pointers and two for multiply/divide result. There are sixteen 32 bit, general- MB87P2020 ‘Jasmine’ purpose registers arranged as a single bank. The functions of R13 to R15 are Evaluation Boards reserved as virtual accumulator, frame pointer and stack pointer respectively. The instruction set contains many bit manipulation instructions and data moving Product Road Map instructions, which are very helpful in supporting the on-chip peripheral blocks. Graphic Control Tools Although the FR is a RISC, it contains a number of extended instructions, which help assembly level programming, often unavoidable in embedded applications. An example is the store of half of the register bank to memory. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Blocks that require fast access are connected to the FR-core within a RISC Architecture 32 bit Harvard Bus system. These units are the instruction cache, internal RAM, MB911xx Series the DMA-controller and the bit-Search unit. Resources that require simple control or status access, such as UARTs, Timers, etc., are hooked up on a 16 bit Starterkit MB91100 peripheral bus known as the R-Bus. The R-Bus gateway to the FR-core is a MB91360 Series Bus-convertor module like the one for the external Bus interface. Starterkit MB91360 FR Series Software Support CPU Core Diagram FR Series In-Circuit Emulator 32 bits Data Bus REALOS, OSEK/VDX & EMBOS FR-V Series Introduction to Graphic Display

Controllers *1 PC R0 Multiplier ALU MB86290A ‘Cremson’ Shifter *2 PS R1 MB86291 ‘Scarlet’ TBR . . MB86292 ‘Orchid’ MDH RP . MDL . MB87J2120 ‘Lavender’ SSP R15 MB87P2020 ‘Jasmine’ USP

Evaluation Boards Dedicated General- registers purpose Product Road Map registers Graphic Control Tools

KEY *1: 32 bit x 32 bit: 5 clock cycles *2: 16 bit x 16 bit: 3 clock cycles PC: Program counter PS: Program status TBR: Table base register RP: Return pointer SSP: System stack pointer USP: User stack pointer MDH/MDL: Multiplication and division result register ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit This general-purpose bus, also called the ‘User Logic Bus’ is used for accessing RISC Architecture the on-chip Flash ROM as well as the CAN-Interfaces, which typically require a MB911xx Series faster and more extensive data flow to and from the FR-core than most of the other on-chip resources. The external Bus also gives the user the opportunity to Starterkit MB91100 access external memory or other memory-mapped devices on the target MB91360 Series application, supporting seven fully configurable chip-select areas with external Starterkit MB91360 chip-select pins which can be controlled individually in terms of memory-area, FR Series Software Support bus-width, wait-states or alignment. FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS FR-V Series Introduction to Graphic Display Controllers MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit MB911XX SERIES RISC Architecture MB911xx Series The MB911xx Series of feature-rich embedded controllers is based on the FR 32 Starterkit MB91100 bit RISC CPU core. The MB91101, MB91106, MB91F109, MB91110* and MB91111* devices offer for the most part the same peripherals but with MB91360 Series complementary memory options. Starterkit MB91360 Several devices have their performance enhanced by the inclusion of 1kB of FR Series Software Support 2 way set associative instruction cache, with locking function. The Flash memory FR Series In-Circuit Emulator on the MB91F109 is sectored, single voltage programming, and guarantees 10,000 erase cycles and 10 year data retention. REALOS, OSEK/VDX & EMBOS The external bus controller supports up to 25 address bits, can interface to 8 FR-V Series or 16 bit data bus widths by each of the 6 programmable chip selects and Introduction to Graphic Display although normally big endian, can work in little endian style for one of the chip Controllers selects. Each chip select can operate with up to 7 wait states and a minimum MB86290A ‘Cremson’ page size of 64kBytes. The associated DRAM controller supports 2 banks of MB86291 ‘Scarlet’ Hyper page or Fast page mode memories. Any unused pins on the bus interface MB86292 ‘Orchid’ can be configured as port I/O. The 10 bit A/D convertor can convert in 5.6µs on a 50MHz device. The MB87J2120 ‘Lavender’ UARTs can support both asynchronous and synchronous transfers. The DMA MB87P2020 ‘Jasmine’ controller supports sources from both on-chip peripheral and external bus Evaluation Boards locations. Other useful features are timers, PWMs and external interrupt Product Road Map controller. Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Applications Contacts

Contents

Introduction to FR Series – 32 bit FR MB911xx Series 32 bit RISC Microcontrollers RISC Architecture MB911xx Series MB91101A MB91106 MB91F109 MB91110* MB91111* Clock Speed MHz 50 Int./25 Ext. 50 Int./25 Ext. 25 50 Int./25 Ext. 50 Int./25 Ext. Starterkit MB91100 Clock Multiplier x4 x4 x2 x4 x4 ROM / FLASH - 63kB Inst. ROM 254kB Inst./Data - 16kB Inst. ROM MB91360 Series 64kB Inst./ FLASH Data ROM Starterkit MB91360 Instruction Cache 1kB - - 1kB 1kB RAM 2kB Data 2kB Data 4kB Data 16kB Instruction 5kB Data FR Series Software Support 5kB Data External Bus Address 25 bit Address 25 bit Address 25 bit Address 25 bit Address 25 bit FR Series In-Circuit Emulator Data 8/16 bit Data 8/16 bit Data 8/16 bit Data 8/16 bit Data 8/16 bit DRAM Controller Fast Page Fast Page Fast Page Fast Page Fast Page REALOS, OSEK/VDX & EMBOS Mode + EDO Mode + EDO Mode + EDO Mode + EDO Mode + EDO Chip Selects 66666 FR-V Series DMA Controller 8 Channels 8 Channels 8 Channels 5 Channels 5 Channels (5 internal (5 internal (5 internal (2 internal (2 internal Introduction to Graphic Display + 3 external) + 3 external) + 3 external) + 3 external) + 3 external) Controllers External Interrupt 4 Channels 4 Channels 4 Channels 8 Channels 8 Channels + NMI + NMI + NMI + NMI + NMI MB86290A ‘Cremson’ A/D Convertor 10 bits x 4 10 bits x 4 10 bits x 4 10 bits x 8 10 bits x 8 Channels Channels Channels Channels Channels MB86291 ‘Scarlet’ UART 3 Channels 3 Channels 3 Channels 1 Channel 1 Channel MB86292 ‘Orchid’ 16 bit Timer 3 Channels 3 Channels 3 Channels 2 Channels 2 Channels 16 bit PWM 4 Channels 4 Channels 4 Channels - - MB87J2120 ‘Lavender’ 16 bit Pr. Pulse Gen. ---6 Channels 6 Channels Low Power Modes Gear, Sleep, Gear, Sleep, Gear, Sleep, Gear, Sleep, Gear, Sleep, MB87P2020 ‘Jasmine’ Stop, Hardware Stop, Hardware Stop, Hardware Stop, Hardware Stop, Hardware Standby Standby Standby Standby Standby Evaluation Boards Voltage Range 5V +/- 10% 3.0V +/- 10% 3.0V +/- 10% 3.3V Int./ 3.3V Int./ or 3.3V +/- 10% 5.0V Ext. 5.0V Ext. Product Road Map or 3.3V Int./ or 3.3V Int./ 3.3V Ext. 3.3V Ext. Graphic Control Tools Packages QFP100, QFP100, QFP100, LQFP144 LQFP144 LQFP100 LQFP100 LQFP100 *Under development ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit EMULATOR

RISC Architecture EVA-CHIP MB91V101/91V106 MB911xx Series Trace RAM IF DSU Utim x 3 Starterkit MB91100 Clock Module Watchdog Int Control UART x 3 MB91360 Series FR CPU Low Power Starterkit MB91360 Unit RelTim x 3 I-Cache* FR Series Software Support Data RAM 1kB INSTR D FR Series In-Circuit Emulator ATA ADC x 4 Bit Search DMA REALOS, OSEK/VDX & EMBOS 32 32 PWM x 4

FR-V Series Ext. Bus Harvard Bus Converter Ext. Int x 4 Introduction to Graphic Display Controllers DRAM cntr I/0-Ports MB86290A ‘Cremson’ Flash/ROM MB86291 ‘Scarlet’ Ext. Bus R-Bus 16 32 Interface 32 Interface MB91106/ MB86292 ‘Orchid’ 91F109 MB87J2120 ‘Lavender’ MB9110x Block Diagram. MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit STARTERKIT MB91100 RISC Architecture MB911xx Series To assist in evaluating the architecture, performance and features of its 32 bit Starterkit MB91100 RISC devices, Fujitsu has developed the Starterkit MB91100, a low cost multi- functional evaluation board for the Fujitsu microcontroller series MB91101, MB91360 Series MB91106 and MB91F109. It can be used stand alone for software development Starterkit MB91360 and testing or as a simple target board to work with the emulator system. FR Series Software Support The board allows a designer immediately to start with the software FR Series In-Circuit Emulator development before their own final target system is available. MB91100 Starterkit. REALOS, OSEK/VDX & EMBOS Key Features FR-V Series Introduction to Graphic Display ● Supports 32 bit FR series MB91101, MB91106 and MB91F109 Controllers ● Fully supports 3V and 5V environment MB86290A ‘Cremson’ ● QFP-100 packages can be used MB86291 ‘Scarlet’ ● In-Circuit serial flash programming ● MB86292 ‘Orchid’ All resources available for evaluation ● All pins routed to connectors MB87J2120 ‘Lavender’ ● 12.5MHz main crystal MB87P2020 ‘Jasmine’ ● Two UART Interfaces (3V and 5V operating) Evaluation Boards ● 8 User LEDs Product Road Map ● Reset and interrupt buttons Graphic Control Tools ● Prototyping area ▲

Back ▲ Forwaed THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit MB91360 SERIES RISC Architecture MB911xx Series MB91360 Series with up to 3 FULL-CAN Interfaces and 512kB Single Voltage Starterkit MB91100 Flash Memory MB91360 Series Created in Fujitsu’s 0.35µm CMOS process MB91F36x-devices with on-chip Starterkit MB91360 Flash ROM and CAN are ideal for a wide range of automotive and industrial FR Series Software Support applications. MB91F36x parts are being used in high-end instrumentation FR Series In-Circuit Emulator systems today, where special on-chip features such as stepper motor controllers, real-time watch timer, sound generator, high current LED drivers and PPGs for REALOS, OSEK/VDX & EMBOS light dimmers are important. FR-V Series Some versions contains up to 5 million transistors in 160 logical blocks. The Introduction to Graphic Display FR CPU clocks at 64MHz internally and is supported by instruction RAM and up Controllers to 32kB RAM. All devices have a built-in 512kB Flash-ROM memory with 10 MB86290A ‘Cremson’ years data retention and a minimum of 10,000 erase-cycles. Different MB86291 ‘Scarlet’ programming algorithms can be used such as in-circuit programming, EPROM- MB86292 ‘Orchid’ programmers or serial programming using the internal boot-ROM (including a security function). MB87J2120 ‘Lavender’ In addition to the special features, a number of general-purpose peripheral MB87P2020 ‘Jasmine’ blocks are available such as serial communication interfaces, 10 bit A/D and D/A Evaluation Boards convertors, input capture and output compare, reload timers, external interrupts Product Road Map and many more. Power down management features include individual clock-gear Graphic Control Tools functions, sleep and stops modes and reset generation if the voltage drops below a defined threshold plus over / under voltage detection interrupt. EMC will be more important for the functionality and security of electronic devices. Today’s systems require a permanent increase of the clock frequency, ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit high-density PCB layouts with more complex functions and low manufacturing RISC Architecture cost. All members of the MB91360-family will therefore be equipped with a new MB911xx Series clock modulator unit which drastically reduces the EME (electromagnetic emission) and helps getting your design EMI-approved! This feature can bring Starterkit MB91100 remarkable advantages to your entire system since redesigns due to EMI- MB91360 Series problems can be avoided. The modulation of the internal operation clock reduces Starterkit MB91360 the noise by spreading the energy of the MCU over a wide frequency range. FR Series Software Support FR Series In-Circuit Emulator EMULATOR EVA-CHIP REALOS, OSEK/VDX & EMBOS MB91FV360 Only FRTim x 2 FR-V Series Trace RAM IF DSU OCU x 4 Clock Module ICU x 4 Introduction to Graphic Display (4MHz + 32kHz PLL) Watchdog Int Control SMC x 4 SOUND Controllers FR50 CPU Power Control 2 MB86290A ‘Cremson’ PPG x 8 I C MB86291 ‘Scarlet’ Data RAM I-RAM Ext Bus D 12kB INSTR 4kB RTim x 6 LED x 8 ATA MB86292 ‘Orchid’ Bit Search DMA CAN x 3 DAC x 2 MB87J2120 ‘Lavender’ 32 D ; 1 ADC x 16

MB87P2020 ‘Jasmine’ Harvard Bus Converter Alarm PD Reset Ext. Bus Interface Evaluation Boards Ext. Int x 8 Flash ROM Fast RAM RT Clock 4kB Product Road Map 512kB Boot ROM UART x 3 SIO x 2 2kB R-Bus Graphic Control Tools 208 Interface

MB91F362 Block Diagram. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Key Features RISC Architecture MB911xx Series ● 32 bit core CPU; max. 64MHz/15.6ns internal cycle time from 4MHz clock ● 0.35µm CMOS Technology Starterkit MB91100 ● Internal voltage regulator MB91360 Series ● Supports 3V MCU core from 5V supply, offering low EMI and low power Starterkit MB91360 consumption figures FR Series Software Support ● Built-in clock modulator for EMC optimisation ● CAN 2.0B protocol controllers: FR Series In-Circuit Emulator • 16 message buffers, each individually programmable for: Transmit or receive REALOS, OSEK/VDX & EMBOS • 11 or 29 identifier bits FR-V Series • Full identifier bit compare/full mask/compare against 1 of 2 mask registers Introduction to Graphic Display • Ability to group buffers into flexible multi-level configuration Controllers • Readable error counter MB86290A ‘Cremson’ ● 512kB Flash-ROM; supports automatic programming, 10,000 erase cycles, 10 MB86291 ‘Scarlet’ year data retention time, no second programming voltage required ● 4kB instruction RAM MB86292 ‘Orchid’ ● up to 32kB static RAM MB87J2120 ‘Lavender’ ● 5 channels DMA, external and internal channels with 16 sources MB87P2020 ‘Jasmine’ ● Internal boot ROM Evaluation Boards ● Up to 8 external interrupts + NMI Product Road Map ● Power down reset if supply voltage falls below pre-set threshold Graphic Control Tools ● Under / over voltage detection ● ADC: up to 16 channel analogue inputs, resolution 10 bits ● DAC: up to 2 channel analogue outputs, resolution 10 bits ● ICU (Input Capture) 16 bit ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● OCU (Output Compare) 16 bit RISC Architecture ● Programmable pulse generator 16 bit MB911xx Series ● Stepper motor controller ● UART full duplex up to 115kBaud (LIN optional) Starterkit MB91100 ● I2C Bus controller up to 400kHz MB91360 Series ● Synchronous serial I/O up to 1Mbit/s Starterkit MB91360 ● Re-load timer 16 bit FR Series Software Support ● LED driving port FR Series In-Circuit Emulator EMULATOR EVA-CHIP MB91FV360G REALOS, OSEK/VDX & EMBOS Only Clock Modulator Trace RAM IF DSU FRTim x 2 FR-V Series ICU x 4 OCU x 4 Clock Module Introduction to Graphic Display (4MHz PLL) Watchdog Int Control Controllers FR50 CPU SMC x 4 Sound Power Control MB86290A ‘Cremson’ PPG x 8 I2C MB86291 ‘Scarlet’ Data RAM I-RAM Ext Bus 12kB 4kB D INSTR

ATA LED x 8 RTim x 6 MB86292 ‘Orchid’ Bit Search DMA CAN x 3 MB87J2120 ‘Lavender’ 32 D ; 1 ADC x 16 DAC x 2

MB87P2020 ‘Jasmine’ Harvard Bus Converter Alarm PD Reset Ext. Bus Evaluation Boards Interface Fast RAM RT Clock Ext. Int x 8 Flash ROM 4kB Product Road Map 512kB UART x 3 SIO x 2 Graphic Control Tools Boot ROM R-Bus 208 2kB Interface

MB91F362G Block Diagram. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● Sound generator RISC Architecture ● Real-time watch timer MB911xx Series ● Same emulation system for entire series ● Different package options from 120-pin to 208-pin (QFP) Starterkit MB91100 MB91360 Series Clock Modulator Debug Unit Starterkit MB91360

Clock Module FR Series Software Support (4MHz PLL) Watchdog Int Control FR50 CPU FRTim x 2 FR Series In-Circuit Emulator Power Contol REALOS, OSEK/VDX & EMBOS ICU x 4 OCU x 4 Data RAM 12kB D INSTR 2 FR-V Series ATA PPG x 4 I C Bit Search CAN x 1 LED x 8 Introduction to Graphic Display 32 D ; 1 RTim x 3 Controllers NMI Int Harvard Bus Converter ADC x 12 MB86290A ‘Cremson’ Ext. Bus Interface Ext. Int x 8 MB86291 ‘Scarlet’ Fast RAM RT Clock Flash ROM 4kB 256kB SIO x 1 MB86292 ‘Orchid’ (LIN)UART Boot ROM R-Bus x 3 120 2kB Interface MB87J2120 ‘Lavender’ DAC x 2 MB87P2020 ‘Jasmine’ Evaluation Boards MB91F364G Block Diagram. Product Road Map Graphic Control Tools The MB91360 Series offers devices with the same core, but with different peripheral and package options: The MB91F362 is the successor of the MB91F361 (both chips are 100% pin-, resource- and instruction-compatible) and as Fujitsu’s most complex 32 bit ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit microcontroller it offers over 20 on-chip peripherals including 3 CAN controllers, RISC Architecture external bus interface and stepper-motor controllers. The package used for the MB911xx Series MB91F362 is a QFP208. Via its new MB91F364G, Fujitsu now offers a 32 bit single CAN interface Starterkit MB91100 device for applications demanding a small footprint. This new device satisfies MB91360 Series today’s requirement for higher performance coupled with ‘platform’-based Starterkit MB91360 solutions, where many compatible devices are used for a wide variety of FR Series Software Support applications. The device has a host of on-chip peripherals including UARTs, I2C and serial FR Series In-Circuit Emulator synchronous interfaces, in addition to the CAN interface, 16 bit reload timers, REALOS, OSEK/VDX & EMBOS input-capture/output-compare units and real-time clock, as well as a 12-channel FR-V Series ADC and 8 external interrupts. This wealth of peripherals enables the Introduction to Graphic Display MB91F364G to be used in a wide range of applications from automotive to Controllers industrial. MB86290A ‘Cremson’ Particularly important for single-chip applications is the new on-chip MB86291 ‘Scarlet’ ‘background debug support unit’, which helps software development and debugging of the final application without the use of in-circuit emulator systems. MB86292 ‘Orchid’ This unit provides a number of instruction and data-breakpoints including mask MB87J2120 ‘Lavender’ and range-functionality. Used together with the appropriate background MB87P2020 ‘Jasmine’ software, this unit speeds up application development and offers the ability to Evaluation Boards debug in the final application. Product Road Map Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit The new MB91F365 and MB91F366 microcontrollers are powerful devices for all RISC Architecture kinds of automotive and industrial applications, where motor-control, multiple MB911xx Series CAN-busses and many kinds of serial interfaces are required. These devices are useful for single-chip applications (they have no external bus-interface) and are Starterkit MB91100 therefore housed in a compact QFP120 package. MB91360 Series

Starterkit MB91360 EMULATOR EVA-CHIP MB91FV360G FR Series Software Support Only Clock Modulator Trace RAM IF DSU FRTim x 2 FR Series In-Circuit Emulator ICU x 4 OCU x 2 Clock Module (4MHz PLL) REALOS, OSEK/VDX & EMBOS Watchdog Int Control FR50 CPU SMC x 4 Sound FR-V Series Power Control I2C PPG x 8 Introduction to Graphic Display Data RAM I-RAM 16kB 4kB D INSTR Controllers ATA RTim x 6 Bit Search DMA MB86290A ‘Cremson’ CAN x 2 32 D ; 1 ADC x 8 DAC x 2 MB86291 ‘Scarlet’ Harvard Bus Converter Alarm PD Reset Ext. Bus MB86292 ‘Orchid’ Interface

Fast RAM RT Clock Ext. Int x 8 MB87J2120 ‘Lavender’ Flash ROM 16kB 512kB MB87P2020 ‘Jasmine’ UART x 2 SIO x 2 Boot ROM R-Bus Evaluation Boards 120 2kB Interface Product Road Map Graphic Control Tools MB91F365 Block Diagram. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit The MB91F366 is a version which offers an additional 32kHz clock input for the RISC Architecture RTC (real time clock) plus calibration unit. All functions, pins and resources are MB911xx Series 100% identical, but instead of the DAC, the MB91F366 has a 32kHz sub-clock connection which enables precise real time clock functions. Starterkit MB91100 EMULATOR MB91360 Series EVA-CHIP MB91FV360G Only Starterkit MB91360 Clock Modulator Trace RAM IF DSU FRTim x 2

FR Series Software Support ICU x 4 OCU x 2 Clock Module (4MHz PLL) FR Series In-Circuit Emulator Watchdog Int Control FR50 CPU SMC x 4 Sound 32kHz Sub- REALOS, OSEK/VDX & EMBOS clock + calib PPG x 8 I2C Data RAM I-RAM FR-V Series Power Control 16kB 4kB D INSTR ATA RTim x 6 Introduction to Graphic Display Bit Search DMA CAN x 2 Controllers 32 D ; 1 ADC x 8 MB86290A ‘Cremson’ Harvard Bus Converter Alarm PD Reset Ext. Bus MB86291 ‘Scarlet’ Interface Fast RAM RT Clock Ext. Int x 8 Flash ROM 16kB MB86292 ‘Orchid’ 512kB

UART x 2 SIO x 2 MB87J2120 ‘Lavender’ Boot ROM R-Bus 120 2kB Interface MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map MB91F366 Block Diagram. Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit The MB91F367 and MB91F368 microcontrollers are strip-down versions to fulfil RISC Architecture the needs of small-footprint applications which require no external bus-interface MB911xx Series and no special peripheral functions such as stepper-motor drivers, etc. For both devices, 120-pin packages are used and they offer 2 CAN controllers and a set of Starterkit MB91100 standard peripherals such as timers, serial interfaces, input capture/output MB91360 Series compare units and many more. Starterkit MB91360

EMULATOR FR Series Software Support EVA-CHIP MB91FV360G Only FR Series In-Circuit Emulator Clock Modulator Trace RAM IF DSU REALOS, OSEK/VDX & EMBOS Clock Module (4MHz PLL) FR-V Series Watchdog Int Control FR50 CPU FRTim x 2 Power Control Introduction to Graphic Display ICU x 4 OCU x 2

Controllers Data RAM I-RAM 16kB 4kB D INSTR MB86290A ‘Cremson’ ATA PPG x 4 I2C Bit Search DMA CAN x 2 MB86291 ‘Scarlet’ 32 D ; 1 ADC x 8 RTim x 3 MB86292 ‘Orchid’ Harvard Bus Converter Alarm PD Reset Ext. Bus MB87J2120 ‘Lavender’ Interface Fast RAM RT Clock Ext. Int x 8 Flash ROM 16kB MB87P2020 ‘Jasmine’ 512kB

UART x 1 SIO x 2 Evaluation Boards Boot ROM R-Bus 120 2kB Interface Product Road Map Graphic Control Tools

MB91F367 Block Diagram. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit The MB91F368 is a version which offers an additional 32kHz clock input for the RISC Architecture RTC (real-time clock) plus calibration unit. All functions, pins and resources are MB911xx Series 100% identical. Therefore this device can be used where accurate real-time clock information is mandatory. Starterkit MB91100

MB91360 Series EMULATOR EVA-CHIP MB91FV360G Starterkit MB91360 Only Clock Modulator Trace RAM IF DSU FR Series Software Support Clock Module (4MHz PLL) FR Series In-Circuit Emulator Watchdog Int Control FR50 CPU FRTim x 2 REALOS, OSEK/VDX & EMBOS 32kHz Sub- clock + calib ICU x 4 OCU x 2 FR-V Series Data RAM I-RAM Power Control 16kB 4kB D INSTR

ATA 2 Introduction to Graphic Display PPG x 4 I C Bit Search DMA CAN x 2 Controllers 32 D ; 1 ADC x 8 RTim x 3 MB86290A ‘Cremson’ Harvard Bus Converter Alarm PD Reset Ext. Bus MB86291 ‘Scarlet’ Interface

Fast RAM RT Clock Ext. Int x 8 Flash ROM 16kB MB86292 ‘Orchid’ 512kB

MB87J2120 ‘Lavender’ UART x 1 SIO x 2 Boot ROM R-Bus 2kB Interface MB87P2020 ‘Jasmine’ 120 Evaluation Boards Product Road Map MB91F368 Block Diagram. Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Another new member is the MB91F369, a 160-pin version with 2 CAN RISC Architecture controllers and a special external bus-interface for the Fujitsu Graphic MB911xx Series Controllers. The MB91F369 is the ideal microcontroller for applications using these new graphic chips, but having all the benefits of the MB91360 family Starterkit MB91100 members (Flash, CAN, fast FR core, etc.). MB91360 Series Starterkit MB91360 EMULATOR EVA-CHIP MB91FV360G Only FR Series Software Support Clock Modulator Trace RAM IF DSU FR Series In-Circuit Emulator Clock Module (4MHz PLL) REALOS, OSEK/VDX & EMBOS Watchdog Int Control FR50 CPU FR-V Series Power Control PPG x 4 Introduction to Graphic Display Data RAM I-RAM Ext Bus 16kB 4kB D INSTR Controllers ATA RTim x 6 Sound Bit Search DMA CAN x 2 MB86290A ‘Cremson’ 32 D ; 1 ADC x 10 I2C MB86291 ‘Scarlet’ Harvard Bus Converter Alarm PD Reset Ext. Bus MB86292 ‘Orchid’ Interface

Fast RAM RT Clock Ext. Int x 8 Flash ROM 16kB MB87J2120 ‘Lavender’ 512kB

MB87P2020 ‘Jasmine’ UART x 1 SIO x 2 Boot ROM R-Bus 2kB Interface Evaluation Boards 160 Product Road Map

Graphic Control Tools MB91F369 Block Diagram. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit MB91FV360* MB91F362G MB91F364G MB91F365G MB91F366G MB91F367G MB91F368G MB91F369G RISC Architecture Package PGA 401 QFP 208 QFP 120 QFP 120 QFP 120 QFP 120 QFP 120 QFP160 MB911xx Series Flash on F-Bus: size [kByte] 512 512 256 512 512 512 512 512 Starterkit MB91100 BootROMsize [kByte] 22222222 MB91360 Series D-Bus-RAMsize [kByte] 16 12 12 16 16 16 16 15 F-Bus-RAMsize [kByte] 16 4 4 16 16 16 16 16 Starterkit MB91360 I-RAM size [kByte] 44-44444 FR Series Software Support Bit Search Module 11111111 FR Series In-Circuit Emulator DMA (5 channels), external ch 31-----1 REALOS, OSEK/VDX & EMBOS ext. Bus interface yes yes no no no no no yes FR-V Series CAN channels 43122222 I2C with 400 / 100kbit 11111111 Introduction to Graphic Display Controllers UART/UTIMER [ch] 333 (2 LIN) 2 2 1 1 1 MB86290A ‘Cremson’ ICU [ch] 44444440 OCU [ch] 44422220 MB86291 ‘Scarlet’ Free running Cnt. [ch] 22222220 MB86292 ‘Orchid’ SIO [ch] 22122222 MB87J2120 ‘Lavender’ PPG [ch] 88488444 MB87P2020 ‘Jasmine’ 10 bit ADC [ch] 16 16 12 8 8 8 8 8 Evaluation Boards Reload-Timer [ch] 66366336 Product Road Map DAC [ch] 2222---2 Graphic Control Tools ext. Interr. [ch] 888 + NMI 8 8 8 8 8 Stepper Motor Ctrl [ch] 44-44--0 Sound generator 11-11--0 ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit MB91FV360* MB91F362G MB91F364G MB91F365G MB91F366G MB91F367G MB91F368G MB91F369G RISC Architecture Alarm Comparator 11-11111 MB911xx Series Power-down reset 11-11111 Starterkit MB91100 Real-time clock 11111111 MB91360 Series RTC 32kHz input yes no no no yes no yes no 4MHz PLL 11111111 Starterkit MB91360 Clock Modulation yes yes yes yes yes yes yes yes FR Series Software Support LED Port (8 bit) 111----- FR Series In-Circuit Emulator Watchdog 11111111 REALOS, OSEK/VDX & EMBOS Voltage regulator 11111111 FR-V Series Debug Support Unit yes - yes - - - - - Introduction to Graphic Display Trace RAM Interface yes ------Controllers Temp Range °C 0..70 -40..+85 -40..+85 -40..+85 -40..+85 -40..+85 -40..+85 -40..+85 MB86290A ‘Cremson’ * Note: The MB91FV360 is an evaluation chip and can only be used together with the MB2197 emulation system. MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit STARTERKIT MB91360 RISC Architecture MB911xx Series The MB91360 Starterkit is a stand-alone application board that makes it easy to Starterkit MB91100 evaluate and demonstrate almost all features of the MB91360 microcontroller series. Along with the supplied Windows-based development tools, it can be MB91360 Series used as a system for user program developments. Starterkit MB91360 The board can be configured as a target for the MB91360 emulation system, FR Series Software Support or as a stand-alone evaluation board. All peripheral functions are available on FR Series In-Circuit Emulator external pin-headers in order to design and test user applications cost- and time-effectively. For some resource functions, additional hardware is already REALOS, OSEK/VDX & EMBOS MB91360 Starterkit. present on the board (e.g. CAN- and UART-transceivers, LEDs, Buttons, etc.). FR-V Series Introduction to Graphic Display Key Features Controllers MB86290A ‘Cremson’ ● Footprint QFP208 (0.5mm pitch) for MB91F362 (or emulation socket), MB86291 ‘Scarlet’ surrounded by headers for other adaptors ● MB86292 ‘Orchid’ 4MHz or 32kHz crystal selectable ● DC power-supply circuit (incl. testpins for Vcc, GND, power-LED and switch) MB87J2120 ‘Lavender’ ● 512kB external SRAM available for user code and data MB87P2020 ‘Jasmine’ ● External 16550 UART (supports transfer-rates up to 115.2kBaud) Evaluation Boards ● 3 Resets (‘Monitor’ = Flash monitor, ‘User’ = external RAM, ‘Flash’ = User Product Road Map Flash Area) Graphic Control Tools ● 2 MAX232 + DB9 (female) connectors for monitor and internal UART ● CAN transceiver and DB9 (male) for internal CAN0 ● External interrupt 0 and 1 connected to buttons for user interaction ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● Various jumpers for individual configuration RISC Architecture ● 2x16 char LCD (on Port G) MB911xx Series ● 8 LEDs (on Port J) ● External bus and all resources logically grouped on pin-headers Starterkit MB91100 ● Area for extensions (2.54mm grid) MB91360 Series ● Stand-alone configuration features built-in monitor debugger (in Flash) Starterkit MB91360 ● Software example projects for various applications FR Series Software Support FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS FR-V Series Introduction to Graphic Display Controllers MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit FR SERIES SOFTWARE SUPPORT RISC Architecture MB911xx Series Fujitsu now offers its complete range of FR Software Tools as part of a new integrated package called Softune Workbench which operates under Windows Starterkit MB91100 95/98, Windows NT4.0. and Windows 2000. MB91360 Series Included in the standard package are: Starterkit MB91360 FR Series Software Support ANSI C Compiler Macro Assembler FR Series In-Circuit Emulator Linker REALOS, OSEK/VDX & EMBOS Simulator FR-V Series Emulator Introduction to Graphic Display Controllers Extended packages including the following tools are also available: MB86290A ‘Cremson’ MB86291 ‘Scarlet’ C Checker C Analyser MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ At the user interface, the Softune Workbench provides easy access to all the MB87P2020 ‘Jasmine’ tools with improved performance and more features. With this, the designer can Evaluation Boards concentrate on coding and debugging with improved efficiency but with no Product Road Map knowledge of how to start the compiler or linker, etc. Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Operational Features RISC Architecture MB911xx Series ● Simple menu based, mouse driven operations • GUI language tools Starterkit MB91100 • Automatic compiling and linking of associated pre-input files MB91360 Series • Dialogue boxes to facilitate selection of tool options and project settings Starterkit MB91360 ● Multiple user support FR Series Software Support ● Automatic start by linking editor, compiler, assembler, linker and debugger ● Error jump by simple double click, allowing editor to point automatically to FR Series In-Circuit Emulator errors REALOS, OSEK/VDX & EMBOS ● Selection of built-in editor with syntax highlighting feature, or user’s own FR-V Series preferred editor Introduction to Graphic Display ● On-line compiler and assembler manual help display Controllers ● Customisable environment MB86290A ‘Cremson’ ● Set-up Wizard for debugging environment ● Save / Restore debugging environment MB86291 ‘Scarlet’ MB86292 ‘Orchid’ Debugger Features MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ ● Source-level debugging (C, Assembler or Mixed) / Files appear as designed Evaluation Boards ● Breakpoints Code/Data (6 HW, 65536 SW) possible on every source-line Product Road Map ● Navigate functions : Go, Go to line, Step, Step out, Step over, Call function, Graphic Control Tools Reset ● Watch (Variables) : Automatic update (x sec), Format (Hex, Bin, etc.), Structures ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● View of global and local variables RISC Architecture ● Register Window : configurable, updated=red MB911xx Series ● Memory Window : format, symbolic edit, direct edit, ASCII ● Dis-assembler Window and in line assembler Starterkit MB91100 ● Trace Window (various display modes) including backtrace function MB91360 Series ● Misc : Stack follower, time measurement, vector display Starterkit MB91360 ● Simulator : IO-Port stimulus and logging, Interrupt simulation FR Series Software Support ● Tool-control : command Input, log-files and batch files FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS FR-V Series Introduction to Graphic Display Controllers MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit FR SERIES IN-CIRCUIT EMULATOR RISC Architecture MB911xx Series The MB2197 is Fujitsu’s emulation system for 32 bit RISC FR architecture Starterkit MB91100 microcontrollers. It makes use of the DSU (Debug Support Unit) integrated within theFR evaluation devices, to provide a powerful debugging environment MB91360 Series without compromising full system operating speed. Starterkit MB91360 The system comprises the MB2197-01 emulation unit (including one FR Series Software Support MB2197-10 DSU probe cable), which connects to the host PC via RS232 or FR Series In-Circuit Emulator integrated 10BASE2 LAN interface. The MB91VxxxCR FR evaluation device plugs into a pod or adaptor board and this, depending on the family, then plugs into REALOS, OSEK/VDX & EMBOS MB2197 Fujitsu’s Emulation System for 32 bit RISC Architecture. either a suitable IC socket located on the target hardware, or connects to a FR-V Series header board and NQ-PACK on the target hardware. The optional MB2197-90 Introduction to Graphic Display ROM Overlay Unit provides 4MBytes of program download memory, if this is not Controllers available on the target hardware itself. The MB91101 in a QFP package is MB86290A ‘Cremson’ supported by the FR-RAM-STACK1-100P-M06 which provides 1MByte of MB86291 ‘Scarlet’ emulation RAM on the adaptor, around the MB91V101CR. MB86292 ‘Orchid’ Third Party Development Environments for the FR Series MB87J2120 ‘Lavender’ Cygnus MB87P2020 ‘Jasmine’ Green Hills • GNU C/C++/EC++ Evaluation Boards • C/C++/EC++ • GNU ToolChain • ‘Multi’ development Environment Product Road Map • GDB debugger with Cygnus GUI • Debugger Graphic Control Tools • Cygnus target monitor • Monitor • Instruction set simulator • Simulator • PC/Windows and Sun Solaris 2 platforms ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit RISC Architecture REALOS & OSEK/VDX & EMBOS MB911xx Series REALOS Real-Time OS for the FR Series Starterkit MB91100 REALOS/FR is a real-time OS for the FR Series of microcontrollers which MB91360 Series conforms to Version 3.0 of the µITRON specification. Starterkit MB91360 FR Series Software Support Features FR Series In-Circuit Emulator ● High speed system calls REALOS, OSEK/VDX & EMBOS ● High speed interrupt processing FR-V Series ● Up to 32,767 tasks ● Up to 32 priorities Introduction to Graphic Display ● Controllers 50 system calls ● Priority based and event driven scheduling system MB86290A ‘Cremson’ ● Kernel size from 2.7kB (min) to 7.2kB (max) MB86291 ‘Scarlet’ ● Multi-Windows based configurator which creates executable program with MB86292 ‘Orchid’ optimised environment of kernel and application programs MB87J2120 ‘Lavender’ ● Sample I/O driver MB87P2020 ‘Jasmine’ ● Sample program ● Debugger macro enabling ordinary debugger to perform debugging of Evaluation Boards µITRON tasks Product Road Map ● Multi-Windows based REALOS debugger, capable of working at the C level Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit OSEK/VDX OS Targeted for Automotive Applications RISC Architecture MB911xx Series OSEK/VDX is an operating system targeted for automotive applications. It consists of three parts, the OSEK kernel, the communications interface and the Starterkit MB91100 network management. Mainly automotive controller networks using CAN MB91360 Series interfaces will employ the OSEK operating system. The FR series Starterkit MB91360 microcontrollers is supported with optimised drivers for the Fujitsu CAN controller. FR Series Software Support OSEK-OS defines the task types ‘Basic’ and ‘Extended’. Basic tasks cannot FR Series In-Circuit Emulator have a waiting state and so are suitable for those which run completely after REALOS, OSEK/VDX & EMBOS each activation. Extended tasks can react to events; they can have a waiting FR-V Series state. OSEK-OS also defines four conformance classes: Introduction to Graphic Display ● BCC1 – basic tasks, single activation Controllers ● BCC2 – basic tasks, multiple activation MB86290A ‘Cremson’ ● ECC1 – basic and extended tasks, single activation MB86291 ‘Scarlet’ ● ECC2 – basic and extended tasks, multiple activation MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ The FR series OSEK without CAN driver and network management requires 3.2kB ROM for class ECC1 (standard status) MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit embOS OS Targeted for Embedded Applications RISC Architecture MB911xx Series embOS is a real-time operating system for embedded applications designed to offer the benefits of a fully featured multitasking system even for hard real time Starterkit MB91100 applications using minimal resources. All functions of embOS have been placed MB91360 Series in individual modules to ensure that only the functions needed are actually linked Starterkit MB91360 into the application program, leaving maximum room for the user-program. FR Series Software Support Features FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS ● Pre-emptive multitasking ● FR-V Series Priority controlled scheduling ● Round robin scheduling Introduction to Graphic Display ● Intertask communication Controllers ● Software timer MB86290A ‘Cremson’ ● Minimum interrupt latency MB86291 ‘Scarlet’ ● Fast & efficient MB86292 ‘Orchid’ ● Small footprint (can be used in single-chip mode) ● MB87J2120 ‘Lavender’ Easy to use start project ● Versatile MB87P2020 ‘Jasmine’ ● Support directly by developers Evaluation Boards ● System analysis via UART Product Road Map ● Profiling support Graphic Control Tools ● TCP/IP- and other network stacks available ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Developing applications with embOS RISC Architecture MB911xx Series embOS is available in source or object code form. Both come with a ready to go start project: Starterkit MB91100 The first multi-task program is running within five minutes. The start application MB91360 Series and usable samples are supplied in source code form. Libraries for all memory Starterkit MB91360 models and initialisation of the controller in ‘C’-source are included to tailor the system to any application. FR Series Software Support Check out the free full functional trial version which can be downloaded from FR Series In-Circuit Emulator the website: www.segger.com REALOS, OSEK/VDX & EMBOS FR-V Series TCP/IP stacks for embOS Introduction to Graphic Display As connectivity and Internet became a major issue even in embedded systems, Controllers embOS is designed to support TCP/IP and other network stacks. We offer a MB86290A ‘Cremson’ fully-featured, 100% RFC compliant TCP/IP stack, that runs on any supported MB86291 ‘Scarlet’ 16 or 32 bit target CPU. It provides virtually all of the protocols, link layers, MB86292 ‘Orchid’ interfaces and device drivers that are required for networking connectivity MB87J2120 ‘Lavender’ applications. MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit FR-V SERIES RISC Architecture The FR-V is a new processor core platform designed for embedded System-on- MB911xx Series Chip implementations. It provides designers with a varied set of configuration Starterkit MB91100 options that can be customised for specific applications. To meet the low power MB91360 Series consumption requirements of emerging digital consumer, automotive and communications applications, the FR-V power consumption is as low as 0.05 Starterkit MB91360 milliwatts per MOPS. The FR-V supports an instruction-level parallelism that FR Series Software Support enables simultaneous processing of multiple instructions. FR Series In-Circuit Emulator FR-V power consumption is as low as The FR-V architecture consists of 16 bit integer instruction set, 32 bit integer REALOS, OSEK/VDX & EMBOS 0.05 milliwatts per MOPS. instruction set, media instruction set, digital signal instruction set, and floating point instruction set. This floating point instruction set is based on the IEEE 754 FR-V Series specification. Due to the FR-V’s high performance, functions traditionally Introduction to Graphic Display performed in hardware can be executed by software. It allows flexible Controllers partitioning of hardware and software implementation, so the changes can be MB86290A ‘Cremson’ executed during or after the development cycle. If desired, functions can be MB86291 ‘Scarlet’ modified simply by re-writing software that runs on FR-V. MB86292 ‘Orchid’ The FR-V technology will be available in different cores, each with a full MB87J2120 ‘Lavender’ range of custom options that can be defined according to application-specific MB87P2020 ‘Jasmine’ requirements. Evaluation Boards Fujitsu today offers the FR500 core, a 4-slot VLIW core, which is designed for media-rich processing applications, such as video de/compression. It provides Product Road Map 532 MIPS (million instructions per second) integer processing, 4256 MOPS Graphic Control Tools (million operations per second) application processing, and 1064 MFLOPS (million floating point operations per second), and requires only a single watt of power consumption. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit The FR400, a 2-slot VLIW core, is designed for embedded applications which RISC Architecture require high performance, but no floating point execution such as next- MB911xx Series generation automotive applications and compact multimedia applications. Starterkit MB91100 MB91360 Series FR-V Instruction Sets Starterkit MB91360 4-Slot VLIW FR Series Software Support 32 bit Integer Instruction I FR Series In-Circuit Emulator IIFMFM 16 bit Integer Instruction i REALOS, OSEK/VDX & EMBOS FR-V Series Floating Point Instruction F Introduction to Graphic Display Controllers Media Instruction M MB86290A ‘Cremson’ 2-Slot VLIW MB86291 ‘Scarlet’ DSP Instruction D MB86292 ‘Orchid’ IM MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ It also provides 532 MIPS integer application processing and 2128 MOPS media Evaluation Boards performance with very low power consumption. Product Road Map The FR-V series continues Fujitsu’s long company-wide experience with Graphic Control Tools processor technologies for embedded consumer, automotive and communications applications. The company’s SPARClite series has been widely used in digital cameras, printers and networking systems. Its FR series has already been designed into automotive and communications products. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ICE Debug Sup. RISC Architecture 4b S-Unit I-Unit 15b MB911xx Series SDRAM GR Int-0 Controller Inst. Cache SDRAM 16kB/4 way 32bx64w 64b Starterkit MB91100 1RW/1R 5R/4W Int-1

Clk, Rst, Inst. Pipeline Cntl. MB91360 Series Pwer Inst. Cache Cntl. Buff. I I F/M F/M

Starterkit MB91360 Data Cache Cntl. Companion FR Series Software Support Chip System Bus

High-Bandwidth System Interconnect Data Cache Float-0 16kB/4 way FR 1RW/1R 32bx64w FR Series In-Circuit Emulator Float-1 GDC DMA 5R/4W REALOS, OSEK/VDX & EMBOS Media-0 ASIC MMU FR-V Series Media-1 ROM/ FM-Unit Introduction to Graphic Display FLASH Controllers MB86290A ‘Cremson’ MB93501 Block Diagram. MB86291 ‘Scarlet’ Fujitsu drew on this rich experience in embedded design software in the MB86292 ‘Orchid’ development of the new FR500 and FR400 processor cores. Development MB87J2120 ‘Lavender’ environments of the new processor cores are based on an advanced version of a vector compiler used in Fujitsu supercomputers. Instead of assembly languages, MB87P2020 ‘Jasmine’ which are used for developing DSP and media-related applications, the FR-V Evaluation Boards development environment enables users to write applications with high-level Product Road Map languages, which significantly reduces design cycle times. Graphic Control Tools FR500 Core: MB93501 ‘TIGER’: A CPU-type processor which is built around the FR500 core incorporating 6 execution units (2 Integer, Media and Floating units) and which can issue 4 ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit RISC Architecture ICE Debug Sup. 4b S-Unit MB911xx Series 15b SDRAM GR Int-0 Controller SDRAM Inst. Cache 32bx64w Starterkit MB91100 64b 8kB 5R/4W Int-1 I-Unit MB91360 Series Clk, Rst, Inst. Pipeline Cntl. Pwer Inst. Cache Cntl. Buff. I/M I/M Starterkit MB91360 Data Cache Cntl. FR Series Software Support DMA

GDC High-Bandwidth System Interconnect Data Cache MR Media-0 FR Series In-Circuit Emulator SRAM/FLASH 8kB 32bx64w Peripheral 5R/4W Media-1 REALOS, OSEK/VDX & EMBOS ASIC I/O Bus BR 32b

ROM/ 32b FR-V Series MMU M-Unit FLASH Bridge Introduction to Graphic Display Low-Bandwidth Peripheral Bus

Controllers UART Timer INT GPIO x2 x2 x2 x2 MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB93401 Block Diagram MB86292 ‘Orchid’ instructions at one clock cycle. The MB93501 works together with a companion MB87J2120 ‘Lavender’ chip which has further peripherals and an external bus-interface for user extensions. The MB93501 is clocked at 266MHz and is supported by 16kB Data- MB87P2020 ‘Jasmine’ and Instruction-caches respectively as well as 133MHz SDRAM memory. Evaluation Boards FR400 Core: MB93401 ‘ROBIN’: Product Road Map A stand-alone CPU based on the FR400 core (2 Integer and Media execution Graphic Control Tools units) with some on-chip peripherals (2 UARTs, 2 Timers, 4 external Interrupts and general purpose IO-pins). An external bus-interface allows direct connection to standard SRAM-interfaced devices (e.g. direct connection to Fujitsu’s Graphic Controllers). ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit The MB93401 is clocked at 266MHz (200MHz for automotive applications) and RISC Architecture is supported by 8kB Data- and Instruction-caches respectively as well as MB911xx Series 133MHz (100MHz) SDRAM memory. The package is an BGA288. Fujitsu plans to continue refining its CMOS expertise with the development of Starterkit MB91100 sub-0.1µm process technology, achieving over 500MHz of frequency and less MB91360 Series than 0.05mW/MOPS of power consumption. Also, Fujitsu plans to intensify its Starterkit MB91360 application-specific functions by increasing the number of simultaneous FR Series Software Support operations and their combinations in VLIW and customising the on-chip peripherals for car-navigation platforms and multimedia applications. FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS FR-V Emulator Tools and Support FR-V Series Introduction to Graphic Display Fujitsu offers a comprehensive toolset from Software-Support (based on Softune Controllers Workbench), Libraries (e.g. MPEG en/decoding, Graphic Library for Fujitsu’s MB86290A ‘Cremson’ GDC family, TCP/IP, etc.), a full-featured In-Circuit Emulation-System MB2199 MB86291 ‘Scarlet’ and evaluation boards. Also a range of operating systems such as REALOS, eLINUX and others are available. MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit INTRODUCTION TO GRAPHIC DISPLAY RISC Architecture MB911xx Series CONTROLLERS

Starterkit MB91100 Fujitsu’s new family of graphic display controllers will optimise solutions for MB91360 Series embedded graphic applications, such as car navigation and mobile information Starterkit MB91360 terminals. The products in this family have numerous functions which are state-of-the-art to graphic controllers today, but have been specially optimised FR Series Software Support for the embedded systems area. This means that, in addition to many 2D and 3D FR Series In-Circuit Emulator In-car navigation is a key target application for rendering functions, there is a flexible layer concept, support for screen REALOS, OSEK/VDX & EMBOS the Cremson graphic display controller. resolution of up to XGA (1024x768), plus further features which are of particular FR-V Series interest in the area of navigation, such as alpha-blending and anti-aliasing. All derivatives have a CPU interface to enable the direct connection of embedded Introduction to Graphic Display CPUs and MCUs. Fujitsu offers a range of graphic display controllers with Controllers different levels of integration for various applications. MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit MB86290A ‘CREMSON’ RISC Architecture MB911xx Series MB86290A ‘Cremson’ is a 2D/3D graphics controller, optimised for applications Starterkit MB91100 in car navigation systems and mobile information processing terminals. Adopting various sophisticated functions, such as flat or Gouraud shading, MB91360 Series bilinear texture mapping, and Z-buffering, Cremson offers a high-speed, Starterkit MB91360 superior-performance 3D graphics functionality. Moreover, anti-aliasing, FR Series Software Support concaved polygon rendering and fast line draw features are also included, FR Series In-Circuit Emulator The new GDC’s support for 3D graphics makes allowing smooth and sophisticated-quality rendering. As a result, Cremson possible features such as ‘bird-view’ performs high-quality rendering operations, with similar quality to leading-edge REALOS, OSEK/VDX & EMBOS perspectives. PC graphics, but with lower power dissipation. Cremson supports a 64 bit wide FR-V Series external memory interface. This interface is driven at the same 100MHz Introduction to Graphic Display frequency as its internal operation, to support the large-memory bus bandwidth Controllers that is needed to perform the high-performance graphics operations described MB86290A ‘Cremson’ above. Also, in order to support various kinds of system configurations, MB86291 ‘Scarlet’ Cremson offers a configurable host interface for four types of CPUs (Fujitsu MB86292 ‘Orchid’ FR30, Hitachi SH3/4, and NEC V832) without external glue logic. To address the especially complex Window configurations of car navigation MB87J2120 ‘Lavender’ systems, Cremson offers 4 layers of overlay planes. These layers are (from top MB87P2020 ‘Jasmine’ to bottom): C (console) layer, W (window) layer, M (middle) layer and B (base) Evaluation Boards layer. All layers can be rendered in 16 bit/pixel colour (65,536 colours displayed Product Road Map at a time) or rendered in 8 bit indirect colour mode (256 selected out of 262,144 Graphic Control Tools colours). The colour palette can be defined separately to the C layer and B and M layers. A transparent colour option is used to blend the layers directly. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Layer Concept RISC Architecture MB911xx Series For screen separation in wide-screen displays, the M and B layers can be split into two separate segments (left and right). This feature is useful when two Starterkit MB91100 different reduced map scales are displayed side by side. Of course, all these MB91360 Series layers and segments can be scrolled independently. Two hardware cursors are Starterkit MB91360 supported in addition. FR Series Software Support An ‘alpha-flag’ per pixel is supported for the C-layer. This feature is useful for blending the C layer colour with all the layer contents below, providing a variable FR Series In-Circuit Emulator transparent colour effect (‘alpha-blending’). REALOS, OSEK/VDX & EMBOS FR-V Series C (Console) layer – 8, 16 bit/pixel Introduction to Graphic Display – Applied to show switches and panel displays Controllers MB86290A ‘Cremson’ W (Window) layer – 16 bit/pixel (Y:U:V = 2:1:1)* MB86291 ‘Scarlet’ – Applied to overlay input video image MB86292 ‘Orchid’ M (Middle) layer MB87J2120 ‘Lavender’ – 8, 16 bit/pixel – Supplement for Base, can be divided into two MB87P2020 ‘Jasmine’ zones Evaluation Boards B (Base) layer – 8, 16 bit/pixel Product Road Map – Fundamental map display layer, can be divided into two zones Graphic Control Tools * To be supplied by 2nd generation product with embedded DRAM. This layer can be adopted as a 3rd graphics layer as well. An important feature of Cremson and all subsequent members of the family is that graphical information can be displayed on four overlapping, independent layers. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Cremson consists of 4 block modules: host interface block, external memory RISC Architecture interface block, display control block, and 2D/3D rendering block. An internal 64 MB911xx Series bit bus called Pixel bus connects these modules. Also, the host interface block is connected to each of the other 3 blocks independently to avoid display and/or Starterkit MB91100 rendering operations when the host CPU attempts to access these modules. MB91360 Series Starterkit MB91360 FR Series Software Support External D[0:31] Display H/V sync FR Series In-Circuit Emulator Host Colourkey Bus of Interface Controller FR CPU A[2:25] REALOS, OSEK/VDX & EMBOS Pixel Bus DAC FR-V Series Introduction to Graphic Display Controllers 2D/3D MD[0:63] MB86290A ‘Cremson’ 64Mbit External Rendering SDRAM Memory Engine or MB86291 ‘Scarlet’ 16Mbit MA[0:13] Controller SGRAM MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ MB86290A ‘Cremson’ block diagram. Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Key Features RISC Architecture MB911xx Series ● CMOS 0.25µm technology ● Display resolutions up to 1024x768 Starterkit MB91100 ● 4 layers of overlay display (bottom 2 layers are both split into separate MB91360 Series segments) Starterkit MB91360 ● RGB analogue output (high speed DAC) FR Series Software Support ● Includes various kinds of 2D/3D graphic acceleration functions ● Built-in alpha-blending, anti-aliasing and chroma-keying FR Series In-Circuit Emulator ● Up to 32MB external graphic memory (SDRAM) 64 bit wide @ 100MHz REALOS, OSEK/VDX & EMBOS ● Configurable CPU-interface for FR30, SH3, SH4, V83x CPUs FR-V Series ● Supply voltage 3.3V (I/O), 2.5V (Internal) Introduction to Graphic Display ● QFP-240 Package Controllers ● Temperature range -40 to +85°C MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit MB86291 ‘SCARLET’ RISC Architecture MB911xx Series MB86291A ‘Scarlet’ is an enhanced version of MB86290A ‘Cremson’ which adds 16Mbit embedded SDRAM, video input functions and a geometry processor. The Starterkit MB91100 concept of display layers, 2D/3D rendering functions and the display controller MB91360 Series features are taken from ‘Cremson’ MB86290A. Starterkit MB91360 Scarlet is optimised for applications in car navigation systems, which require video-input features, consumer information processing systems and arcade FR Series Software Support game applications. FR Series In-Circuit Emulator Scarlet has 16Mbit of embedded SDRAM with high bandwidth (100MHz). No Scarlet offers some of the most advanced external SDRAM devices are required for graphic memory. The external video REALOS, OSEK/VDX & EMBOS functionality yet developed for use in input can be used to capture video signals according to the standard FR-V Series automotive navigation and multimedia information terminals. RBT-ITU656 YUV4:2:2 format. Picture-in-picture functions are supported to Introduction to Graphic Display display the video image (the W-layer is dedicated for that purpose). To adjust the Controllers dimensions of the video-input format, a flexible video scaler is integrated. MB86290A ‘Cremson’ A geometry processor, capable of performing numeric calculations for MB86291 ‘Scarlet’ graphical operations in included. Supported functions are Affin-conversions, model-view-projections, 3D-clipping operations and others. All drawing MB86292 ‘Orchid’ functions, display list-formats and software functions are compatible to the MB87J2120 ‘Lavender’ ‘Cremson’ MB86290A. An additional RGB digital interface offers flexible display MB87P2020 ‘Jasmine’ connections. Evaluation Boards Product Road Map Key Features Graphic Control Tools ● CMOS 0.25µm technology ● Display resolutions up to 1024x768 ● 4 layers of overlay display (bottom 2 layers are both split into separate segments) ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● Digital video input RISC Architecture ● Video scaler ● I2C interface MB911xx Series ● Geometry processor Starterkit MB91100 ● RGB analogue output (high speed DAC) MB91360 Series ● RGB digital output (8 bit x 3) ● Includes various kinds of 2D/3D graphic acceleration functions Starterkit MB91360 ● Built-in alpha blending, anti-aliasing and chroma-keying FR Series Software Support ● Embedded 16Mbit SDRAM graphic memory FR Series In-Circuit Emulator ● Configurable CPU-interface for FR30, SH3, SH4, V83x CPUs ● Supply voltage 3.3V (I/O), 2.5V (Internal) REALOS, OSEK/VDX & EMBOS ● QFP-208 Package FR-V Series ● Temperature range -40 to +85°C Introduction to Graphic Display Controllers External D[0:31] YUV MB86290A ‘Cremson’ Host External Video Bus of Interface Interface Controller

MB86291 ‘Scarlet’ Pixel Bus Digital RGB FR CPU A[2:25] MB86292 ‘Orchid’ Display MB87J2120 ‘Lavender’ Controller DAC Memory MB87P2020 ‘Jasmine’ Interface Controller Geometry 2D/3D Evaluation Boards Engine Rendering Engine Product Road Map

Graphic Control Tools Embedded SDRAM 16Mbit

MB86291 ‘Scarlet’ block diagram. ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit MB86292 ‘ORCHID’ RISC Architecture MB86292 ‘Orchid’ is another version of MB86291‘Scarlet’ which has external MB911xx Series video memory connection up to 32MB for those applications, where the 2MB Starterkit MB91100 embedded SDRAM of MB86291 ‘Scarlet’ is not sufficient. All functions of Scarlet MB91360 Series including video input, scaler and a geometry processor are also available on Orchid. The concept of display layers, 2D/3D rendering functions and the display Starterkit MB91360 controller features are taken from ‘Cremson’ and ‘Scarlet’. Orchid is optimised FR Series Software Support for applications in car navigation systems which requires video input features, ‘Orchid’ is optimised for applications in car consumer information processing systems and arcade game applications. The FR Series In-Circuit Emulator navigation systems. external memory interface can be connected to ‘Fujitsu FCRAM’ or SDRAM type REALOS, OSEK/VDX & EMBOS memory devices. The external video input can be used to capture video signals FR-V Series according to the standard RBT-ITU656 YUV4:2:2 format. Picture-in-picture Introduction to Graphic Display functions are supported to display the video image (the W-layer is dedicated for Controllers that purpose). To adjust the dimensions of the video input format, a flexible video scaler is integrated. A geometry processor, capable of performing numeric MB86290A ‘Cremson’ calculations for graphical operations in included. Supported functions are MB86291 ‘Scarlet’ Affin-conversions, model-view-projections, 3D-clipping operations and others. MB86292 ‘Orchid’ Orchid has only RGB digital outputs for display connections. All drawing MB87J2120 ‘Lavender’ functions, display list-formats and software functions are compatible to the ‘Cremson’ MB86290A and ‘Scarlet’ MB86291. MB87P2020 ‘Jasmine’ Evaluation Boards Key Features Product Road Map Graphic Control Tools ● CMOS 0.25µm technology ● Display resolutions up to 1024x768 ● 4 layers of overlay display (bottom 2 layers are both split into separate segments) ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● Digital video input RISC Architecture ● Video scaler ● I2C interface MB911xx Series ● Geometry processor Starterkit MB91100 ● RGB digital output (8 bit x 3) MB91360 Series ● Includes various kinds of 2D/3D graphic acceleration functions ● Built-in alpha blending, anti-aliasing and chroma-keying Starterkit MB91360 ● External SDRAM or FCRAM interface for up to 32MB graphic memory FR Series Software Support ● Configurable CPU-interface for FR30, SH3, SH4, V83x CPUs FR Series In-Circuit Emulator ● Supply voltage 3.3V (I/O), 2.5V (Internal) ● QFP-256 Package REALOS, OSEK/VDX & EMBOS ● Temperature range -40 to +85°C FR-V Series Introduction to Graphic Display Controllers D[0:31] External External Video MB86290A ‘Cremson’ YUV Bus of Host Interface Controller Interface MB86291 ‘Scarlet’ FR CPU A[2:25] Pixel Bus MB86292 ‘Orchid’ Display Digital RGB MB87J2120 ‘Lavender’ Controller MB87P2020 ‘Jasmine’ Evaluation Boards 32MByte MD[0:63] 2D/3D External Geometry Rendering Product Road Map SDRAM Memory Engine Controller Engine or MA[0:13] Graphic Control Tools FCRAM

MB86292 ‘Orchid’ block diagram. ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit MB87J2120 ‘LAVENDER’ RISC Architecture MB911xx Series MB87J2120 ‘Lavender’ is another new member of the Fujitsu graphic controller family but with a different set of features dedicated for graphical applications Starterkit MB91100 that require no 3D-rendering functions and use low-resolution displays such as MB91360 Series dashboards, user interfaces in consumer applications or control panels. Starterkit MB91360 The MB87J2120 supports almost all LCD panel types (digital or analogue interface), and CRTs or otherprogressive scanned monitors/displays, which can FR Series Software Support be connected via the analogue RGB output. FR Series In-Circuit Emulator MB87J2120 ‘Lavender’ is optimised to work with the Fujitsu MB91360 series REALOS, OSEK/VDX & EMBOS RISC-controllers (e.g. MB91F361A) and will be clocked at 64MHz (internal frequency). The device has a 32 bit SDRAM interface (graphic memory). FR-V Series The 2D rendering functions are composed out of standard primitives such as Introduction to Graphic Display lines, polygons, rectangles, etc., as well as some special functions like Controllers decompression of RLE-bitmaps and text display. 4 layers of overlay can be MB86290A ‘Cremson’ displayed simultaneously. MB86291 ‘Scarlet’ The graphic output is an RGB analogue or digital interface for a great variety of LCD displays (programmable sync and scan behaviour). MB87J2120 also has MB86292 ‘Orchid’ a digital video input being an RGB 555/888 interface. MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Key Features Evaluation Boards ● CMOS 0.25µm technology Product Road Map ● Flexible display controller for almost all standard LCD panels Graphic Control Tools ● 4 layers of overlay display (out of 16 logical layers) ● RGB analogue output (DAC) ● RGB digital output ● Includes 2D graphic acceleration functions ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● external SDRAM graphic memory 32 bit RISC Architecture ● Digital video input (RGB555 or RGB888 format) ● CPU-interface for FR30 MB911xx Series ● Supply voltage 3.3V (I/O), 2.5V (Internal) Starterkit MB91100 ● BGA-256P-M01 Package MB91360 Series ● Temperature range -40 to +85°C Starterkit MB91360 FR Series Software Support FR Series In-Circuit Emulator D[0:31] Video Interface External RGB FR Host Controller V/C REALOS, OSEK/VDX & EMBOS Bus of Interface FR CPU A[2:21] Display, H/Vsync FR-V Series ULB Sync, Backlight Introduction to Graphic Display Backlight Controller Controllers Digital RGB Pixel Bus MB86290A ‘Cremson’ DAC MD[0:31] MB86291 ‘Scarlet’ External Memory 8MB Pixel Processor Controller MB86292 ‘Orchid’ SDRAM MA[0:13] (2D) SDC PP MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards MB87J2120 ‘Lavender’ block diagram. Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit MB87P2020 ‘JASMINE’ RISC Architecture MB911xx Series MB87P2020 ‘Jasmine’ is an enhanced version of MB87J2120 ‘Lavender’ which Starterkit MB91100 adds 8Mbit embedded SDRAM, and some more improved features. The device is fully compatible to the Lavender chip and uses the same internal architecture, the MB91360 Series same layer and interface concept. No external memory devices are required for Starterkit MB91360 graphic memory because of the 8Mbit embedded SDRAM. As a consequence, the FR Series Software Support package could be reduced to QFP208. Therefore, Jasmine is optimised for FR Series In-Circuit Emulator compact automotive or consumer applications where a high integration of functions is required. Like Lavender, the Jasmine is optimised to work as a REALOS, OSEK/VDX & EMBOS companion chip for the Fujitsu 32 bit RISC devices MB91F36x. FR-V Series As a successive product to Lavender, the new device has a number of Introduction to Graphic Display enhancements which allows there to be more flexibility in the application area. Controllers First of all, a new video input interface was developed which allows acceptance of MB86290A ‘Cremson’ more formats (including YUV) and which is compatible to a wider range of video MB86291 ‘Scarlet’ decoder chips. A new programmable convertor matrix (YUV to RGB) allows MB86292 ‘Orchid’ writing of these YUV formats to layers and to convert back to RGB for scanning. In addition, a gamma correction table was added to allow adjustment of the MB87J2120 ‘Lavender’ picture characteristics according to the connected display requirements and the MB87P2020 ‘Jasmine’ colour look-up table that can now hold up to 512 entries. Evaluation Boards Key Features Product Road Map ● Graphic Control Tools CMOS 0.25µm technology ● Flexible display controller for almost all standard LCD panels ● 4 layers of overlay display (out of 16 logical layers) ● RGB analogue output (DAC) ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit ● RGB digital output RISC Architecture ● Includes 2D graphic acceleration functions ● Gamma correction embedded MB911xx Series SDRAM graphic memory 8Mbit (1MByte) Starterkit MB91100 ● Digital video input (RGB and YUV formats) MB91360 Series ● CPU-interface for FR30 ● Supply voltage 3.3V (I/O), 2.5V (Internal) Starterkit MB91360 ● QFP208 Package FR Series Software Support ● Temperature range -40 to +85°C FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS FR-V Series D[0:31] Video Interface External RGB/YUV FR Host Controller Introduction to Graphic Display Bus of Interface V/C Controllers FR CPU A[2:25] Display, H/Vsync ULB MB86290A ‘Cremson’ Sync, Backlight Backlight MB86291 ‘Scarlet’ Controller Digital RGB Memory Pixel Bus MB86292 ‘Orchid’ Interface DAC Controller GPU MB87J2120 ‘Lavender’ Pixel Processor MB87P2020 ‘Jasmine’ (2D) PP Evaluation Boards Embedded SDRAM 8Mbit Product Road Map Graphic Control Tools

MB87P2020 ‘Jasmine’ block diagram. ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit EVALUATION BOARDS RISC Architecture MB911xx Series For application development support and functional evaluation, a number of evaluation boards are available from Fujitsu: Starterkit MB91100

MB91360 Series PCI Evaluation Board MB8629x-EB01 Starterkit MB91360 MB86290A-EB01 Cremson Evaluation Board. A PCI adaptor card with a ‘Cremson’ MB86290A, a ‘Scarlet’ MB86291A or an FR Series Software Support ‘Orchid’ MB86292 is available which allows the evaluation of the features of the FR Series In-Circuit Emulator device directly from a Windows PC. For this, a Windows NT/Windows 2000 REALOS, OSEK/VDX & EMBOS driver and a map driver are bundled with this adaptor card in order to get started, enabling easy programming of the Cremson from a Windows NT based FR-V Series development environment. Also, the source code of various application examples Introduction to Graphic Display is included. In addition, the card can be directly mounted to an embedded Controllers A Starterkit will be available for the GDCs, system, however the main purpose is software development. enabling designers to build up specific MB86290A ‘Cremson’ embedded applications with the targeted MB86291 ‘Scarlet’ processor and GDC together. Cremson Starterkit Series MB86292 ‘Orchid’ The Cremson Starterkit is a modular evaluation board, which provides a MB87J2120 ‘Lavender’ standalone embedded environment. The kit hardware consists of two parts, a MB87P2020 ‘Jasmine’ CPU module, which carries the Fujitsu 32 bit RISC MCU MB91F36X and a set of Evaluation Boards sub-boards for the graphic controllers Cremson, Scarlet, Lavender and Jasmine. In order to have the appropriate configuration for the application Product Road Map requirements, the system allows the CPU type or the graphic controller to be Graphic Control Tools easily changed. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit The interconnection between both module boards is the host-CPU bus interface. RISC Architecture All functions of the graphic devices and the CPU are present on pin headers, jumpers or switches, which allows the addition of hardware extensions. MB911xx Series In combination with the PCI adapter MB8629X-EB01, the software modules Starterkit MB91100 developed under Windows NT can then also be used directly in the standalone MB91360 Series environment. Starterkit MB91360 FR Series Software Support FR Series In-Circuit Emulator REALOS, OSEK/VDX & EMBOS FR-V Series Introduction to Graphic Display Controllers MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit PRODUCT ROAD MAP RISC Architecture MB911xx Series Starterkit MB91100 edia and Digital AV Maroon MB91360 Series GDC Multim Burgundy + CPU Starterkit MB91360 Vermillion + FCRAM FR Series Software Support 133 MHz 2D MPEG FR Series In-Circuit Emulator obile Carmine GDC Navigation and M Rose REALOS, OSEK/VDX & EMBOS Coral AV Orchid MCM FR-V Series Scarlet 200 MHz Cremson external SDRAM 6 layers Introduction to Graphic Display + SDRAM 100 MHz + video input er Controllers 2D/3D + geometry engine GDC Dashboard and Consum tbd MB86290A ‘Cremson’ Jasmine + CPU Lavender MB86291 ‘Scarlet’ + SDRAM 64 MHz + gamma cor. MB86292 ‘Orchid’ 2D MB87J2120 ‘Lavender’ 1999 2000 2001 2002 2003 MB87P2020 ‘Jasmine’ Roadmap of graphic controller development. Under development Evaluation Boards Product Road Map New enhanced graphics display controllers for various kinds of digital audio/video applications, in which multimedia functions will be integrated Graphic Control Tools together are planned as successive products. In addition we plan to integrate the CPU core and various I/O functions and define a single-chip solution for car navigation applications. As Fujitsu’s primary GDC products, the car navigation family will be extended further. ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Device Name Chip 2D 3D No of Alpha RGB RGB Video Video Video Geometry CPU Package RISC Architecture freq Layers blending digital analog input scaler Memory Processors Interface MB911xx Series MB87J2120 Lavender 64MHz x - 4 - x x x - external Starterkit MB91100 (up to 8MByte) - FR BGA256 MB91360 Series MB87P2020 Jasmine 64MHz x - 4 - x x x - embedded - FR QFP208 (1MByte) Starterkit MB91360 MB86290A Cremson 100MHz x x 4 4 bit / - x - - external - FR, QFP240 FR Series Software Support layer (up to 32MByte) SH3/4,V850 FR Series In-Circuit Emulator MB86291A Scarlet 100MHz x x 4 4 bit / x x x down embedded 1 (fixed FR, QFP208 layer scaling (2MByte) algorithms) SH3/4,V850 REALOS, OSEK/VDX & EMBOS MB86292 Orchid 100MHz x x 4 4 bit / x - x down external 1 (fixed FR, QFP256 FR-V Series layer scaling (up to 32MByte) algorithms) SH3/4,V850

Introduction to Graphic Display MB8629x Coral 200MHz x x 6 8 bit x - x up + down external 2 FR, QFP or Controllers alpha-plane scaling (up to 64MByte) (programmable) SH3/4,V850 BGA MB86290A ‘Cremson’ Devices under development: ‘Rose’: An MCP (multi-chip package) version of Orchid or Coral +SDRAM in one package ‘Coral’ will be available in different versions MB86291 ‘Scarlet’ (package options and feature options) MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit GRAPHIC CONTROL TOOLS RISC Architecture MB911xx Series Evaluation Board Description Device Starterkit MB91100 MB86290-EB01 PCI board for PCs (WinNT) MB86290A Cremson

MB91360 Series MB86291-EB01 PCI board for PCs (WinNT) MB86291A Scarlet Starterkit MB91360 MB86292-EB01 PCI board for PCs (WinNT) MB86292 Orchid FR Series Software Support CREMSON-STARTERKIT-CPU CPU module for the "Cremson Modular Starterkit" MB91F362 as host CPU FR Series In-Circuit Emulator CREMSON-STARTERKIT-CRM Sub-board for Modular Starterkit MB86290A Cremson REALOS, OSEK/VDX & EMBOS CREMSON-STARTERKIT-ROSE Sub-board for Modular Starterkit MB86291 Scarlet FR-V Series CREMSON-STARTERKIT-LAV Sub-board for Modular Starterkit MB87J2120 Lavender Introduction to Graphic Display Controllers CREMSON-STARTERKIT-JAS Sub-board for Modular Starterkit MB87P2020 Jasmine MB86290A ‘Cremson’ A sub-board for ‘Orchid’ and development systems for ‘Coral’ are under development MB86291 ‘Scarlet’ Order information : Please specify the items as shown in the ‘Device’ or ‘Evaluation board’ columns above. MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools ▲

Back ▲ Forward THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit EUROPEAN DISTRIBUTORS & REPRESENTATIVES RISC Architecture MB911xx Series EUROPEAN DISTRIBUTORS EBV Elektronik GmbH Paris Nord Electronique Nahkatehtaankatu 2, FIN-90250 Oulu 142-176 avenue de Stalingrad Starterkit MB91100 Austria Tel: (08) 5 62 49 10 Parc Technologique des Corvettes BP 53 EBV Elektronik GmbH Fax: (08) 5 62 49 15 92703 Colombes Cedex MB91360 Series Diefenbachgasse 35/1, A-1150 Wien Tel: (01) 47 80 67 85 Tel: (01) 8 91 52-0 France Fax: (01) 47 85 95 12 Starterkit MB91360 Fax: (01) 8 91 52-30 EBV Elektronik GmbH Immeuble Hemiris, Bâtiment A Germany FR Series Software Support Belgium 115 Rue Nicolas Ledoux EBV Elektronik GmbH EBV Elektronik GmbH F-13854 Aix-en-Provence Kitzingstraße 15-19 Excelsiorlaan 35 /, Av. Excelsior 35 Tel: (04) 42 39 65 40 D-12277 Berlin-Mariendorf FR Series In-Circuit Emulator B-1930 Zaventem Fax: (04) 42 39 65 50 Tel: (0 30) 74 70 05-0 Tel: (02) 7 16 00 10 Fax: (0 30) 74 70 05-55 REALOS, OSEK/VDX & EMBOS Fax: (02) 7 20 81 52 EBV Elektronik GmbH 3, rue de la Renaissance EBV Elektronik GmbH FR-V Series Czech Republic F-92184 Antony Cedex In der Meineworth 21

EBV Elektronikˆ GmbH Tel: (01) 40 96 30 00 D-30938 Burgwedel Introduction to Graphic Display V Holesovièkách 29 Fax: (01) 40 96 30 30 Tel: (0 51 39) 80 87-0 Controllers CZ-182 00 Praha 8 Fax: (0 51 39) 80 87-70 Tel: (02) 66 31 30 31 EBV Elektronik GmbH MB86290A ‘Cremson’ Fax: (02) 68 89 07 8 29, ave des Peupliers EBV Elektronik GmbH F-35510 Cesson Sévigné An der Gümpgesbrücke 7 MB86291 ‘Scarlet’ Denmark Tel: (02) 99 83 00 50 D-41564 Kaarst EBV Elektronik GmbH Fax: (02) 99 83 00 60 Tel: (0 21 31) 96 77-0 MB86292 ‘Orchid’ Ved Lunden 9, DK-8230 Åbyhøj Fax: (0 21 31) 96 77-30 Tel: 86 25 04 66 EBV Elektronik GmbH MB87J2120 ‘Lavender’ Fax: 86 25 06 60 Actys Bâtiment 2, voie 3, BP 348 EBV Elektronik GmbH F-31313 Labège Cedex Im Technologiepark 2-8 MB87P2020 ‘Jasmine’ EBV Elektronik GmbH Tel: (05) 61 00 84 61 D-85586 Poing Evaluation Boards Rosenkæret 11 C, DK-2860 Søborg Fax: (05) 61 00 84 74 Tel: (0 81 21) 77 4-0 Tel: 39 69 05 11 Fax: (0 81 21) 77 4-4 22 Product Road Map Fax: 39 69 05 04 EBV Elektronik GmbH Parc Club du Moulin à Vent EBV Elektronik GmbH Graphic Control Tools Finland 33, Av. du Dr. Georges Lévy Neue Ramtelstraße 4 EBV Elektronik GmbH F-69693 Venissieux D-71229 Leonberg European Distributors & Pihatörmä 1 a, FIN-02240 Espoo Tel: (04) 72 78 02 78 Tel: (0 71 52) 30 09-0 Representatives Tel: (09) 27 05 27 90 Fax: (04) 78 00 80 81 Fax: (0 71 52) 75 95-8 Fax: (09) 27 09 54 98 European Sales Offices ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit EBV Elektronik GmbH Israel EBV Elektronik s.r.l. (Padova) Borsigstraße 7 EBV Elektronik IX Strada, 23/C int.2 RISC Architecture D-65205 Wiesbaden Commercial Centre Dror South Zona Industriale Tel: (0 61 22) 80 88-0 P.O. Box 149, 40650 Tel Mond I-35100 Padova MB911xx Series Fax: (0 61 22) 80 88-99 Tel: (09) 7 96 69 90 Tel: (0 49) 8 07 21 81 R.A. Fax: (09) 7 96 68 80 Fax: (0 49) 8 07 48 74 Starterkit MB91100 EBV Elektronik GmbH Zum Mühlenberg 9 Toyo Ram Electronics Ltd. EBV Elektronik s.r.l. (Roma) MB91360 Series D-07806 Neustadt/Orla 1 Hamasger Street, P.O.Box 2334 Ind. Viale Palmiro Togliatti 1639 Tel: (03 64 81) 24 4-0 Zone, Raanana 43653 I-00155 Roma Starterkit MB91360 Fax: (03 64 81) 24 4-99 Tel: (09) 7 60 36 50 Tel: (06) 4 06 36 65 / 789 Fax: (09) 7 44 30 50 Fax: (06) 4 06 37 77 FR Series Software Support Glyn GmbH & Co. KG Am Wörtzgarten 8 Italy EBV Elektronik s.r.l. (Torino) FR Series In-Circuit Emulator D-65510 Idstein/Ts. EBV Elektronik s.r.l. (Milano) Corso Vercelli 348 Tel: (0 61 26) 59 02 22 Via C. Frova, 34 I-10156 Torino REALOS, OSEK/VDX & EMBOS Fax: (0 61 26) 59 01 11 I-20092 Cinisello Balsamo (Mi) Tel: (011) 2 62 56 90 Tel: 02 66 09 62 90 Fax: (011) 2 62 56 91 FR-V Series Greece Fax: 02 66 01 70 20 EBV Elektronik GmbH Malpassi s.r.l. Introduction to Graphic Display 1, Anaxagora Str. EBV Elektronik s.r.l. (Firenze) Via Baravelli 1 GR-17778 Tavros / Athens Via Panciatichi, 40 I-40012 Calderara di Reno Controllers Tel: (01) 03 41 43 00 Palazzo 11, I-50127 Firenze Bologna Fax: (01) 03 41 43 04 Tel: (0 55) 4 36 93 07 Tel: (0 51) 72 72 52 MB86290A ‘Cremson’ Fax: (0 55) 4 26 52 40 Fax: (0 51) 72 73 78 MB86291 ‘Scarlet’ Hungary EBV Elektronik GmbH EBV Elektronik s.r.l. (Modena) Melchioni Electronica S.p.A. MB86292 ‘Orchid’ H-1107 Budapest, Ceglédi út 1-3 Via Campagna, 12 Divisione Industria Tel: (01) 4 31 34 95/6 I-41010 Cognento (Mo) Via Pietro Colletta 37 MB87J2120 ‘Lavender’ Fax: (01) 4 31 34 97 Tel: (0 59) 29 24 / 21 1 I-20135 Milano Fax: (0 59) 29 29 / 48 6 Tel: 02 5 79 41 MB87P2020 ‘Jasmine’ Ireland Fax: 02 5 41 34 001 EBV Elektronik GmbH EBV Elektronik s.r.l. (Napoli) Evaluation Boards Ballymount Trading Estate Via Paolo della Valle, 32 Netherlands Ballymount Road, Walkinstown Quartiere Soccavo EBV Elektronik GmbH Product Road Map Dublin 12 I-80126 Napoli Planetenbaan 116 Tel: (01) 4 56 40 34 Tel: (0 81) 7 28 16 58 NL-3606 AK Maarssenbroek Graphic Control Tools Fax: (01) 4 56 40 35 Fax: (0 81) 7 67 22 67 Tel: (03 46) 58 30 10 European Distributors & Fax: (03 46) 58 30 25 Representatives European Sales Offices ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Norway EBV Electrolink EBV Elektronik GmbH EBV Elektronik GmbH Building 14, 2nd Floor Av. des Boveresses 52, RISC Architecture P.B 101, Manglerud 141 Western Service Road CH-1010 Lausanne N-0612 Oslo Woodlands Office Park Tel: (0 21) 6 54 01 01 MB911xx Series Tel: (0 22) 67 17 80 Woomead, Johannesburg 2157 Fax: (0 21) 6 54 01 00 Fax: (0 22) 67 17 89 Tel: (0 11) 2 36 19 00 Starterkit MB91100 Fax: (0 11) 2 36 19 13 Turkey Poland EBV Elektronik GmbH MB91360 Series EBV Elektronik GmbH Spain Bayar Cad. Gülbahar Sok. Pl. Solny 16, PL-50062 Wroclaw EBV Elektronik GmbH No. 17 / Perdemsaç Plaza Starterkit MB91360 Tel: (0) 71 3 42 29 44 / 64 / 87 Antón Fortuny 14-16 4° 1a Esc. C D: 56 Kozyatagi Fax: (0) 71 3 42 29 10 E-08950 Esplugues de Llobregat TR-81090 / Istanbul FR Series Software Support Barcelona Tel: (02 16) 4 63 13 52 Russia Tel: (0 93) 4 73 32 00 Fax: (02 16) 4 63 13 55 FR Series In-Circuit Emulator EBV Elektronik GmbH Fax: (0 93) 4 73 63 89 Korovinskoye Shausse 10 United Kingdom REALOS, OSEK/VDX & EMBOS Build 2, off. 28 EBV Elektronik GmbH EBV Elektronik RUS-127486 Moscow Centro Empresarial Euronova EBV House, 7 Frascati Way FR-V Series Tel: (0 95) 9 37 87 07 C/Ronda de Poniente, 4 Maidenhead, Berkshire SL6 4UY Fax: (0 95) 9 37 87 06 1a planta, Oficina A. Tel: (01628) 78 36 88 Introduction to Graphic Display E-28760 Tres Cantos, Madrid Fax: (01628) 78 38 11 Slovenia Tel: (0 91) 8 04 32 56 Controllers EBV Elektronik Fax: (0 91) 8 04 41 03 EBV Elektronik Dunajska 22 144 West George Street MB86290A ‘Cremson’ SI-1511 Ljubljana Sweden Glasgow G2 2HG MB86291 ‘Scarlet’ Tel: (01) 3 00 03 73 EBV Elektronik GmbH Tel: (0141) 3 52 20 50 Fax: (01) 4 33 04 57 Derbyvägen 20 Fax: (0141) 3 52 20 59 MB86292 ‘Orchid’ S-21 235 Malmö South Africa Tel: (0 40) 59 21 00 EBV Elektronik MB87J2120 ‘Lavender’ EBV Electrolink Fax: (0 40) 59 21 01 Manchester International Office Centre 29 Worlds View Road Suite 5B, Styal Road MB87P2020 ‘Jasmine’ Doonside, Durban 4126 EBV Elektronik GmbH Manchester M22 5WB Tel: (0 31) 9 03 79 41 Sjöängsvägen 7 Tel: (0161) 4 99 34 34 Evaluation Boards Fax: (0 31) 9 03 82 44 S-19 272 Sollentuna Fax: (0161) 4 99 34 74 Tel: (08) 59 47 02 30 Product Road Map EBV Electrolink Fax: (08) 59 47 02 31 EBV Elektronik 5th Floor, Fleetway House 12 Interface Business Park Graphic Control Tools Martin Hammerschlag Way Switzerland Bincknoll Lane Foreshore, Cape Town 8001 EBV Elektronik GmbH Wootton Bassett European Distributors & Tel: (0 21) 4 21 53 50 Bernstrasse 394 Wiltshire SN4 8SY Representatives Fax: (0 21) 4 19 62 56 CH-8953 Dietikon Tel: (01793) 84 99 33 Tel: (01) 7 45 61 61 Fax: (01793) 85 95 55 European Sales Offices Fax: (01) 7 45 61 00 ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents

Introduction to FR Series – 32 bit Glyn Ltd EUROPEAN REPRESENTATIVES World Wide Web Sites 172 Norsey Road, Billericay RISC Architecture Essex CM11 1BU Denmark EBV Elektronik GmbH: www.ebv.com Tel: (01277) 63 42 00 Team Tech MB911xx Series Fax: (01277) 63 14 39 Bygstubben 3, DK-2950 Vedbaek Euroinger, s.l. Tel: 45 66 25 00 www.euroinger.com Starterkit MB91100 Glyn Ltd Fax: 45 66 02 44 35 Wansdyke, Lancaster Park, Morpeth Glyn GmbH & Co. KG: MB91360 Series Northumberland NE61 3RA Israel www.glyn.de Tel: (01670) 51 46 16 Toyo Ram Electronics Ltd. Glyn Ltd: Starterkit MB91360 Fax: (01670) 51 69 36 1 Hamasger Street, P.O.Box 2334 Ind. www.glyn.com Zone, Raanana 43653 FR Series Software Support Tel: (09) 7 60 36 50 Malpassi srl: Fax: (09) 7 44 30 50 www.malpassi.it FR Series In-Circuit Emulator Melchioni Electronica SpA: Netherlands www.melchioni.it REALOS, OSEK/VDX & EMBOS A-top electronics b.v. Baltesakker 1a, 5625 TC Eindhoven Team Tech: FR-V Series Tel. (0 40) 292 73 83 www.teamtech.dk Fax: (0 40) 292 70 25 Toyo Ram Electronics Ltd: Introduction to Graphic Display www.toyoram.co.il South Africa Controllers TMS Unit 2, Pine Place MB86290A ‘Cremson’ 116 Johannesburg Road, Lyndhurst MB86291 ‘Scarlet’ 2192 Johannesburg Tel: (0 11) 8 82 68 36 MB86292 ‘Orchid’ Fax: (0 11) 6 40 38 04 MB87J2120 ‘Lavender’ Spain Euroinger, s.l. MB87P2020 ‘Jasmine’ C/ Almendralejos, 4 28140 Fuente el Saz del Jarma Evaluation Boards Madrid Tel: (0 91) 62 01 42 5 Product Road Map Fax: (0 91) 62 00 61 2 Graphic Control Tools European Distributors & Representatives European Sales Offices Direct contact to Fujitsu’s Memory department: [email protected] ▲

Back ▲ Continued THE POSSIBILITIES ARE INFINITE

Home Products Latest News Contacts

Contents Introduction to FR Series – 32 bit EUROPEAN SALES OFFICES RISC Architecture MB911xx Series Germany France United Kingdom Fujitsu Microelectronics Europe GmbH Fujitsu Microelectronics Europe GmbH Fujitsu Microelectronics Europe GmbH Starterkit MB91100 Am Siebenstein 6-10 127, Chemin des Bassins Network House, Norreys Drive MB91360 Series D-63303 Dreieich-Buchschlag F-94035 Créteil Cedex Maidenhead, Berkshire SL6 4FJ Tel: (0 61 03) 69 00 Tel: (01) 45 13 12 12 Tel: (01628) 50 46 00 Starterkit MB91360 Fax: (0 61 03) 69 01 22 Fax: (01) 45 13 12 13 Fax: (01628) 50 46 66 FR Series Software Support Fujitsu Microelectronics Europe GmbH Italy FR Series In-Circuit Emulator Carl-Zeiss-Ring 11 Fujitsu Microelectronics Europe GmbH REALOS, OSEK/VDX & EMBOS D-85737 Ismaning/Munich Palazzo Pitagora - Milano 3 City FR-V Series Tel: (0 89) 96 09 44 0 Via Ludovico il Moro 4B Fax: (0 89) 96 09 44 22 I-20080 Basiglio, Milano Introduction to Graphic Display Tel: 02 90 45 02 1 Controllers Fax: 02 90 75 00 87 MB86290A ‘Cremson’ MB86291 ‘Scarlet’ MB86292 ‘Orchid’ MB87J2120 ‘Lavender’ Direct contact to Fujitsu’s Memory department: [email protected] MB87P2020 ‘Jasmine’ Evaluation Boards Product Road Map Graphic Control Tools European Distributors & Representatives European Sales Offices

Back ▲ End