DOCSLIB.ORG

Bs En Iec 61968‑1:2020

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Bs En Iec 61968‑1:2020 BS EN IEC 61968‑1:2020 BSI Standards Publication Application integration at electric utilities — System interfaces for distribution management Part 1: Interface architecture and general recommendations BS EN IEC 61968‑1:2020 BRITISH STANDARD EUROPEAN STANDARD EN IEC 61968-1 NORME EUROPÉENNE National foreword EUROPÄISCHE NORM June 2020 This British Standard is the UK implementation of EN IEC 61968‑1:2020. It is identical to IEC 61968‑1:2020. It supersedes BS EN 61968‑1:2013, ICS 33.200 Supersedes EN 61968-1:2013 and all of its amendments which is withdrawn. and corrigenda (if any) The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power systems management and associated information exchange. English Version A list of organizations represented on this committee can be obtained on request to its secretary. Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. general recommendations (IEC 61968-1:2020) © The British Standards Institution 2020 Published by BSI Standards Limited 2020 Intégration d'applications pour les services électriques - Integration von Anwendungen in Anlagen der Interfaces système pour la gestion de la distribution - Partie Elektrizitätsversorgung - Systemschnittstellen für ISBN 978 0 580 96665 1 1: Architecture des interfaces et recommandations Netzführung - Teil 13: Allgemeine Profile zur Modellierung générales von Verteilnetzen ICS 33.200 (IEC 61968-1:2020) (IEC 61968-1:2020) Compliance with a British Standard cannot confer immunity from legal obligations. This European Standard was approved by CENELEC on 2020-06-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2020. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. Amendments/corrigenda issued since publication This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the Date Text affected same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels © 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61968-1:2020 E BS EN IEC 61968‑1:2020 EUROPEAN STANDARD EN IEC 61968-1 NORME EUROPÉENNE EUROPÄISCHE NORM June 2020 ICS 33.200 Supersedes EN 61968-1:2013 and all of its amendments and corrigenda (if any) English Version Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general recommendations (IEC 61968-1:2020) Intégration d'applications pour les services électriques - Integration von Anwendungen in Anlagen der Interfaces système pour la gestion de la distribution - Partie Elektrizitätsversorgung - Systemschnittstellen für 1: Architecture des interfaces et recommandations Netzführung - Teil 13: Allgemeine Profile zur Modellierung générales von Verteilnetzen (IEC 61968-1:2020) (IEC 61968-1:2020) This European Standard was approved by CENELEC on 2020-06-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels © 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61968-1:2020 E BS EN IEC 61968‑1:2020 EN IEC 61968-1:2020 (E) European foreword The text of document 57/2174/FDIS, future edition 3 of IEC 61968-1, prepared by IEC/TC 57 "Power systems management and associated information exchange" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61968-1:2020. The following dates are fixed: • latest date by which the document has to be implemented at national (dop) 2021-03-03 level by publication of an identical national standard or by endorsement • latest date by which the national standards conflicting with the (dow) 2023-06-03 document have to be withdrawn This document supersedes EN 61968-1:2013 and all of its amendments and corrigenda (if any). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61968-1:2020 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61968-4 NOTE Harmonized as EN IEC 61968-4 IEC 61968-6 NOTE Harmonized as EN 61968-6 IEC 61968-8 NOTE Harmonized as EN 61968-8 IEC 61970-301 NOTE Harmonized as EN 61970-301 IEC 61970-501 NOTE Harmonized as EN 61970-501 IEC 61970-552 NOTE Harmonized as EN 61970-552 IEC 62325 (series) NOTE Harmonized as EN IEC 62325 (series) IEC 62325-301 NOTE Harmonized as EN IEC 62325-301 IEC 62325-450 NOTE Harmonized as EN 62325-450 IEC 62325-503 NOTE Harmonized as EN IEC 62325-503 IEC 62351 (series) NOTE Harmonized as EN 62351 (series) IEC 62361-100 NOTE Harmonized as EN 62361-100 IEC 62559-2 NOTE Harmonized as EN 62559-2 ISO 19125 (series) NOTE Harmonized as EN ISO 19125 (series) ISO 19115 (series) NOTE Harmonized as EN ISO 19115 (series) 2 BS EN IEC 61968‑1:2020 – 2 – IEC 61968-1:2020 © IEC 2020 CONTENTS FOREWORD ........................................................................................................................... 5 INTRODUCTION ..................................................................................................................... 7 1 Scope ............................................................................................................................ 10 2 Normative references .................................................................................................... 10 3 Terms and definitions .................................................................................................... 11 3.5 Abbreviated terms ................................................................................................. 12 4 Interface reference model .............................................................................................. 12 4.1 Domain ................................................................................................................. 12 4.2 Business functions ................................................................................................ 13 4.3 Interface reference model ..................................................................................... 13 4.3.1 General ......................................................................................................... 13 4.3.2 Asset Management (AM) ............................................................................... 14 4.3.3 Customer Management (CM) ......................................................................... 19 4.3.4 Emergency Simulation (ES) ........................................................................... 22 4.3.5 End Device Operation (EDO) ......................................................................... 25 4.3.6 Engineering Design
Load more

Recommended publications
  • 57-61968-5-Ed1-FDIS
    IEC 61968-5 ED1 © IEC:2020 – 1 – 1 CONTENTS 2 3 FOREWORD ........................................................................................................................... 4 4 INTRODUCTION ..................................................................................................................... 6 5 Scope ..................................................................................................................................... 8 6 Normative references .............................................................................................................. 9 7 Terms, definitions and abbreviated terms .............................................................................. 10 8 3.1 Terms and definitions............................................................................................ 10 9 3.3 Abbreviated terms ................................................................................................. 10 10 Conventions .......................................................................................................................... 11 11 DER enterprise integration use cases ................................................................................... 11 12 5.1 General ................................................................................................................. 11 13 5.2 DER Group Creation ............................................................................................. 14 14 5.3 Maintenance of DERGroups .................................................................................
    [Show full text]
  • IEC-International Electrotechnical Commission
    Standards Manager Web Standards List IEC-International Electrotechnical Commission Id Number Title Year Organization Page 1 60034-2-3 Rotating electrical machines _ Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC 2020 IEC motors - Edition 1.0 2 60034-3 Rotating electrical machines _ Part 3: Specific requirements for synchronous generators driven by steam turbines or 2020 IEC combustion gas turbines and for synchronous compensators - Edition 7.0 3 60034-5 Rotating electrical machines _ Part 5: Degrees of protection provided by the integral design of rotating electrical machines 2020 IEC (IP code) _ Classification - Edition 5.0 4 60034-7 Rotating electrical machines _ Part 7: Classification of types of construction, mounting arrangements and terminal box 2020 IEC position (IM Code) - Edition 3.0 5 60034-11 Rotating electrical machines _ Part 11: Thermal protection - Edition 3.0 2020 IEC 6 60034-18-42 Rotating electrical machines _ Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating 2020 IEC electrical machines fed from voltage converters _ Qualification tests - Edition 1.1; Consolidated Reprint 7 60045-1 Steam turbines _ Part 1: Specifications - Edition 2.0 2020 IEC 8 60050-113 NULL 2020 IEC AMD 2 9 60050-113 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) _ Part 113: Physics for electrotechnology - Edition 1.0 2020 IEC AMD 3 10 60050-151 AMENDMENT 4 International Electrotechnical Vocabulary (IEV) _ Part 151: Electrical and magnetic devices
    [Show full text]
  • Final Report Standards for Smart Grids
    Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Status: approved by the CEN/CENELEC/ETSI Joint Presidents Group (JPG) on 4 May 2011, subject to the formal approval by 2011-06-05 by the individual ESOs Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Foreword < to be added> Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Contents 1. Executive summary .................................................................................................................................. 6 2. Introduction ............................................................................................................................................... 8 2.1 Basic idea of smart grids ..................................................................................................................... 9 2.2 Current political background in Europe ............................................................................................. 11 2.3 Aim of a European standardization report ........................................................................................ 11 2.4 Standardization activities around the world ...................................................................................... 13 3. Description of the overall concept ....................................................................................................... 17 3.1
    [Show full text]
  • Common Information Model (CIM) European Style Market Profile User Guide
    1 European Network of Transmission System Operators for Electricity ENTSO-E Common information model (CIM) European style market profile User guide 2017-01-03 VERSION 3.0 ENTSO-E AISBL • Avenue de Cortenbergh, 100 • 1000 Brussels • Belgium • Tel +32 2 741 09 50 • Fax +32 2 741 09 51 • [email protected] • www.entsoe.eu European Network of ENTSO-E Common information model (CIM) European style market profile user guide Transmission System Operators for Electricity VERSION 3.0 2 Copyright notice: 3 Copyright © ENTSO-E. All Rights Reserved. 4 This document and its whole translations may be copied and furnished to other s, and 5 derivative works that comment on or otherwise explain it or assist in its implementation may 6 be prepared, copied, published and distributed, in whole or in part, without restriction of any 7 kind, provided that the above copyright notice and this paragraph are included on all such 8 copies and derivative works. However, this document itself may not be modified in any way, 9 except for literal and whole translation into languages other than English and under all 10 circumstances, the copyright notice or references to ENTSO-E may not be removed. 11 This document and the information contained herein is provided on an "as is" basis. 12 ENTSO-E DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT 13 LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT 14 INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR 15 FITNESS FOR A PARTICULAR PURPOSE. 16 Maintenance notice: 17 This document is maintained by the ENTSO-E WG EDI.
    [Show full text]
  • Technical Report
    This is a preview - click here to buy the full publication IEC/TR 62357-1 ® Edition 1.0 2012-10 TECHNICAL REPORT colour inside Power systems management and associated information exchange – Part 1: Reference architecture INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XE ICS 33.200 ISBN 978-2-83220-445-0 Warning! Make sure that you obtained this publication from an authorized distributor. ® Registered trademark of the International Electrotechnical Commission This is a preview - click here to buy the full publication – 2 – TR 62357-1 © IEC:2012(E) CONTENTS FOREWORD ........................................................................................................................... 7 INTRODUCTION ..................................................................................................................... 9 0.1 General ............................................................................................................................ 9 0.2 Objectives and overview of this technical report ............................................................... 9 0.3 Rationale ........................................................................................................................ 10 0.4 Trend toward model driven architectures and integration ................................................ 10 0.5 Purpose of the reference architecture ............................................................................. 11 0.6 Scope of reference architecture .....................................................................................
    [Show full text]
  • NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE Za Obdobie Od 1
    NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. 7. 2020 do 31. 7. 2020 Documents Title Closing date 17A/1279/CD IEC TS 62271-316 ED1: High-voltage switchgear and controlgear - Part 316: Direct current by-pass switches and 2020-09-25 paralleling switches 17C/752(F)/CDV IEC 62271-215 Ed. 1: Phase comparator 2020-09-04 20/1916/CDV IEC 62893-1/AMD1 ED1: Amendment 1 - Charging cables for electric vehicles for rated voltages up to and including 2020-09-25 0,6/1 kV - Part 1: General requirements 33/648/CDV IEC 63210 ED1: Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage above 1000 V 2020-09-25 34/710/DTS IEC TS 63105 ED1: Lighting systems and related equipment - Vocabulary 2020-09-25 45/892/CDV IEC 62372 ED2: Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic 2020-09-25 resolution 45A/1348/FDIS IEC 63046 ED1: Nuclear power plants - Electrical power system - General requirements 2020-08-14 48B/2821/CDV IEC 61076-3-122 ED2: Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail 2020-09-25 specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in industrial environments 57/2244/CD IEC 62351-5 ED1: Power systems management and associated information exchange - Data and communications 2020-09-25 security - Part 5: Security for IEC 60870-5 and derivatives 57/2245/CD IEC 61968-9 ED3: Application integration
    [Show full text]
  • Insight in IEC 61850 What Is
    The Standards Based Integration Company Systems Integration Specialists Company, Inc. Insight in IEC 61850 What is it? Ralph Mackiewicz and Herb Falk SISCO, Inc. 6605 19½ Mile Road Sterling Heights, MI 48314-1408 USA Tel: +1-586-254-0020 Fax: +1-586-254-0053 Email: [email protected] – [email protected] 1 © Copyright 2012 SISCO, Inc. Topics IEC 61850 and Its Relationship to other IEC Standards Impact of IEC 61850 on the Engineering Processes of SCADA, Automation, and Protection IEC 61850 Profiles and use of networks IEC 61850 Modeling . Device and Object Models . Service/Behavior Models Substation Configuration Language 2 ©© CopyrightCopyright 20122009 SISCO, Inc. The Standards Based Integration Company Systems Integration Specialists Company, Inc. IEC 61850 and Other Key IEC Standards What is it with all these “models”? 3 © Copyright 2012 SISCO, Inc. Definitions: Interoperability and Integration The ability of computer systems to exchange information with other systems and to cooperatively implement a useful process or function for the system owner/user. 4 ©© CopyrightCopyright 20122009 SISCO, Inc. Interoperability and Integration Easy to Achieve: Nearly anything is possible with enough money and development effort 5 ©© CopyrightCopyright 20122009 SISCO, Inc. A Better Way Interoperability and Integration without having to program it all yourself: . Where applications and devices are inherently capable of interoperating with other systems and performing integrated application functions in a cooperative and distributed manner.
    [Show full text]
  • 2012 Rate Case TD Capital Exhibits Rev 3.Xlsx
    Electric T&D Year Total Year Total Year Total Information Technology Previous 5 Year Actual Forecast Current 5 Year Budget 2012 Forecast Working Total Dollars ($000) Total Dollars ($000) Total Dollars ($000) FY07 FY08 FY09 FY10 FY11 5 Yr. Total FY12 FY13 FY14 FY15 FY16 FY17 5 Yr. Total Electric Transmission Information Technology Cyber Security And Nerc Compliance 0.0 0.0 438.0 524.0 102.0 1,064.0 250.0 300.0 300.0 400.0 300.0 300.0 1,600.0 District Operator Task Managing (15.0) 297.0 33.0 330.0 287.0 932.0 200.0 250.0 300.0 300.0 300.0 300.0 1,450.0 Ecc - Distribution Orders Automation Enhancements 149.0 151.0 149.0 219.0 245.0 913.0 250.0 250.0 400.0 300.0 300.0 300.0 1,550.0 Ems Continuance Ecc 0.0 0.0 0.0 386.0 506.0 892.0 3,000.0 3,050.0 300.0 199.9 0.0 200.0 3,749.9 Operation Management System At Energy Control Center 0.0 298.0 434.0 214.0 298.0 1,244.0 250.0 150.0 400.0 400.0 400.0 450.0 1,800.0 Operations Network For Ems 0.0 5.0 230.0 284.0 199.0 718.0 200.0 200.0 250.0 400.0 600.0 200.0 1,650.0 Plant Information System 1.0 0.0 0.0 0.0 0.0 1.0 200.0 0.0 200.0 0.0 0.0 0.0 200.0 SStystem O perat tiEhion Enhancements t 432.
    [Show full text]
  • Technical Report Iec Tr 62325-101
    This is a preview - click here to buy the full publication TECHNICAL IEC REPORT TR 62325-101 First edition 2005-02 Framework for energy market communications – Part 101: General guidelines IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: [email protected] Web: www.iec.ch PRICE CODE Commission Electrotechnique Internationale W International Electrotechnical Commission Международная Электротехническая Комиссия For price, see current catalogue This is a preview - click here to buy the full publication – 2 – TR 62325-101 IEC:2005(E) CONTENTS FOREWORD.........................................................................................................................4 INTRODUCTION...................................................................................................................6 1 Scope ............................................................................................................................8 2 Normative references .....................................................................................................8 2.1 Generic Open-edi standards ..................................................................................8 2.2 Sectorial Open-edi
    [Show full text]
  • Use Case Modeling for Smart Grids According to IEC/PAS 62559
    Appendix A Use Case Modeling for Smart Grids According to IEC/PAS 62559 Introduction to Use Case Modeling for Smart Grids This chapter is based on both a project and a report the authors have prepared for the German DKE. The following aspects and requirements have been discussed and developed in German national standardization and are envisioned to be brought into the M490 mandate of the EC and the IEC SG 3 work. Use cases were originally established for the purpose of identifying how a system behaves in relation to stakeholders. For CIM-based communications, the establish- ment of use cases is to document future scenarios of energy management systems. A uniform and structured documentation also provides a basis for communication between actors involved in system development, and the analysis of the use cases permits deduction of requirements for system development. Starting with the re- quirements defined, the conceptual design of data models, interfaces, exchange pro- cesses and protocols can take place afterwards. As the result of these efforts, the artifacts identified are to be studied with regard to their need for standardization and involvement in the standardization process. With a sound base of use cases which cover large portions of the future energy systems that are relevant to standardization and with the resulting requirements, a basis for the design of interoperable technical solutions is created. Standardiz- ing these solution concepts, finally, contributes to the establishment of a standards- based, open and interoperable architecture for a future energy system in which so- lutions from various manufacturers jointly implement the vision of a smart grid.
    [Show full text]
  • Requirements for Infrastructure for Interoperability Assessment
    COTEVOS Deliverable D1.3 Requirements for infrastructure for interoperability assessment TECNALIA 28/11/2014 v.2.3 Project Full Title: COncepts, Capacities and Methods for Testing EV systems and their interOperability within the Smart grid FP7-SMARTCITIES-2013, ENERGY 2013.7.3.2 Grant agreement no. 608934 Collaborative Project This project has received funding from the European Union’s Seventh Programme for research, technological development and demonstration under grant agreement No 608934 D1.3 1-59 EU Project no. 608934 Document information Author(s) Company Raúl Rodríguez, C. Madina, E. Zabala TECNALIA Additional authors Company F. Lehfuss, M. Nöhrer AIT G. Mantovani ALTRA S. Misara DERlab T. Meier Sørensen, S. Martinenas DTU R. Kralj, J. Ratej, B. Mehle ETREL A. Barahona-Abrego IWES I. Karakitsios NTUA F. Beloni, D. Pala RSE J. Laarakkers, R. Koffrie, E. Werkman TNO P. Kelm, B. Olek, M. Wierzbowski TUL P. Ševce ZSDIS WP no. and title WP1 – Analysis of the situation and needs for validating the interoperability of the different systems WP leader TUL Task no. and title Tasks 1.5 Task leader TECNALIA Dissemination level PU: Public X PP: Restricted to other program participants (including the Commission Services) RE: Restricted to other a group specified by the consortium (including the Commission Services) CO: Confidential, only for members of the consortium (including the Commission Services) Status For information Draft Final Version X Approved Revisions Version Date Author Comments 0.1 23/06/2014 TECNALIA first version 0.2 09/11/2014 TECNALIA Minor amendments after TUL comments and further TECNALIA's revision 0.3 30/09/2014 TECNALIA 0.4 15/10/2014 TECNALIA State of the art completed, strategy of partners included 1.0 31/10/2014 TECNALIA Revision of partners to their strategy included, introduction, conclusions and executive summary was completed 1.1 05/11/2014 TECNALIA Comments by ETREL included.
    [Show full text]
  • On the Intelligent Smart Grid Network
    On the intelligent smart grid network David Grace Institute of Information Science and Technologies Palmerston North, New Zealand Email: [email protected] Tony Marshall Department of Electrical and Computer Engineering University of Canterbury, Christchurch, New Zealand Silesian University in Opava, Opava, Czech Republic Email: [email protected] Xiaodong Hu Department of Mathematics, Shandong University, Jinan, China Email: [email protected] Abstract: - Smart Grid Networks present a modern solution for network automation and digital communication in order to improve the efficiency, sustainability and reliability of electricity distribution. The development of Smart Grid networks is not a simple matter. Electronic grids consist of a large number of systems, intelligent and regular electronic devices, substations, switching stations, dispatching centers and many other elements. This paper analyse the technological requirements of intelligent Smart Grid network with a focus on networking aspects, standards and protocols. Key-Words: - Smart Grid, IEC, LAN SG, GOOSE, IED, SCADA 1 Introduction and distribution of electric energy, or home During intensive cooperation between the Faculty of appliances and office facilities. New requirements Informatics and Management (FIM UHK) and ČEZ, for the management of electric energy production, a leading Czech energy distribution company, a distribution and consumption management have project aroused demanding specificities of made IEC to expand the norms in order to implement Smart Grid projects. The relevant intelligent networks of Smart Grid type, whose standards from the TC57 group - Power systems implementation in the Czech Republic is inevitable. management and associated information exchange The whole concept of Smart Grid networks are mainly IEC 60870, IEC 61850 and industrial implementation is conditioned by the application of standards used for communication among devices IED (Intelligent Electronic Device) technologies, within the substation or switching station [2].
    [Show full text]