DOCSLIB.ORG

Final Report Standards for Smart Grids

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Final Report Standards for Smart Grids Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Status: approved by the CEN/CENELEC/ETSI Joint Presidents Group (JPG) on 4 May 2011, subject to the formal approval by 2011-06-05 by the individual ESOs Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Foreword < to be added> Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Contents 1. Executive summary .................................................................................................................................. 6 2. Introduction ............................................................................................................................................... 8 2.1 Basic idea of smart grids ..................................................................................................................... 9 2.2 Current political background in Europe ............................................................................................. 11 2.3 Aim of a European standardization report ........................................................................................ 11 2.4 Standardization activities around the world ...................................................................................... 13 3. Description of the overall concept ....................................................................................................... 17 3.1 Scope ................................................................................................................................................ 17 3.2 Procedure .......................................................................................................................................... 17 4. European standardization and regulation landscape ......................................................................... 19 4.1 General recommendations ................................................................................................................ 19 4.2 European Standardization Organizations (ESOs) ............................................................................ 20 5. Status of standardization ...................................................................................................................... 21 5.1 Cross cutting topics ........................................................................................................................... 21 5.1.1 Terminology, object identification and classification .................................................................... 21 5.1.2 Reference architecture ................................................................................................................ 25 5.1.3 Addressing system aspects ......................................................................................................... 35 5.1.4 Data communication interfaces ................................................................................................... 39 5.1.5 Smart Grid Information Security (SGIS) ...................................................................................... 44 5.1.6 Other cross cutting issues ........................................................................................................... 56 5.2 Domain specific topics ...................................................................................................................... 58 5.2.1 Generation ................................................................................................................................... 58 5.2.2 Transmission................................................................................................................................ 61 5.2.3 Distribution ................................................................................................................................... 65 5.2.4 Smart metering ............................................................................................................................ 68 5.2.5 Industry ........................................................................................................................................ 71 5.2.6 Home and building ....................................................................................................................... 74 5.2.7 Demand response applications ................................................................................................... 77 5.3 Market actors and roles ..................................................................................................................... 79 5.3.1 Roles & responsibilities – Current status ..................................................................................... 79 5.3.2 Roles and responsibilities – Recommendations to other actors .................................................. 81 5.3.3 Recommendations to the ESOs .................................................................................................. 82 6. Further activities..................................................................................................................................... 84 6.1 Organizational activities and projects to be started .......................................................................... 84 6.2 Mandate ............................................................................................................................................ 84 6.3 Report 2.0 .......................................................................................................................................... 85 Annexes .......................................................................................................................................................... 86 Annex 1 – Summary list of recommendations ........................................................................................... 86 Annex 2 – Abbreviations and acronyms ..................................................................................................... 95 Annex 3 – References / Bibliography .......................................................................................................... 99 Annex 4 – Core editorial and champion teams compositions ................................................................ 100 3 Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Annex 5 – Demand response ..................................................................................................................... 102 Annex 6 – Interoperability standards ........................................................................................................ 105 Annex 7 – References related to EMC/power quality in the range 2-150 kHz ...................................... 117 Annex 8 – Standards related to low frequency EMC or power quality ................................................. 119 Annex 9 – Generation .................................................................................................................................. 120 Annex 10 – Transmission high level services: details/explanations ..................................................... 123 Annex 11 – Transmission – Existing standards ....................................................................................... 131 Annex 12 – Transmission – Advanced EMS architecture ....................................................................... 133 Annex 13 – Distribution high level services: details/explanations ........................................................ 134 Annex 14 – Home and building automation .............................................................................................. 137 Annex 15 – Index of standards referred to in this Report ....................................................................... 139 Figures Figure 1 – Key elements of a sustainable energy system ................................................................................. 8 Figure 2 – Future network.................................................................................................................................. 9 Figure 3 – A conceptual model for the European Smart Grid ......................................................................... 27 Figure 4 – An extract from the IEC SG3 functional architecture chart (Source IEC/TC 57) .......................... 28 Figure 5 – Reference architecture diagram for smart metering communications ........................................... 29 Figure 6 – NIST approach to Security ............................................................................................................. 31 Figure 7 – IEC/TC57 Information architecture ................................................................................................. 33 Figure 8 – IEC/TC 57 Service-oriented architecture ....................................................................................... 34 Figure 9 – IEC TC 57 Seamless Integration Reference Architecture – IEC TR 62357 ................................... 40 Figure 10 – M2M Service Capabilities (Source: ETSI M2M TC) ..................................................................... 43 Figure 11 – The 8 ―sphere of action‖ domains impacting SGIS ...................................................................... 46 Figure 12 – Domains defined in US (without SGIS Focus) ............................................................................
Load more

Recommended publications
  • Page 1 of 37 Current Standards Activities 5/4/2014 Http
    Current Standards Activities Page 1 of 37 Browse By Group: View All New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Formal Interpretations | Informs & Certification Notices | Previous Reports Last updated: May 2, 2014 New Publications This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store. Program Standard Title Date Posted Scope Electrical / CAN/CSA-C22.2 NO. Household and similar electrical appliances - Safety - Part 2-45: 4/17/2014 View Detail Electronics 60335-2-45:14 Particular requirements for portable heating tools and similar appliances (Adopted IEC 60335-2-45:2002, edition 3:2002, consolidated with amendment 1:2008 and amendment 2:2011, with Canadian deviations) Appareils électrodomestiques et analogues - Sécurité - Partie 2-45 : Règles particulières pour les outils chauffants mobiles et appareils analogues (norme CEI 60335-2-45:2002 adoptée, edition 3:2002, consolidée par l'amendement 1:2008 et l'amendement 2:2011, avec exigences propres au Canada) http://standardsactivities.csa.ca/standardsactivities/recent_infoupdate.asp 5/4/2014 Current Standards Activities Page 2 of 37 Gas Equipment ANSI Z21.41-2014/CSA Quick disconnect devices for use with gas fuel appliances 4/10/2014 View Detail 6.9-2014 Gas Equipment ANSI Z21.74-2014 Portable refrigerators for use with HD-5 propane gas 4/10/2014 View Detail Electrical / CAN/CSA-C22.2 NO. Low-voltage switchgear and controlgear - Part 4-1: Contactors and 4/10/2014 View Detail Electronics 60947-4-1-14 motor-starters - Electromechanical contactors and motor-starters (Bi-national standard, with UL 60947-1) Electrical / CAN/CSA-C22.2 NO.
    [Show full text]
  • UC Berkeley Energy Use in Buildings Enabling Technologies
    UC Berkeley Energy Use in Buildings Enabling Technologies Title Control and Communications Integration Project Mappings Permalink https://escholarship.org/uc/item/58h8s815 Authors Gunther, Erich W. King, Jack Publication Date 2004 eScholarship.org Powered by the California Digital Library University of California CONTROL AND COMMUNICATIONS INTEGRATION PROJECT MAPPING DRAFT EPORT R ONSULTANT Prepared For: C California Energy Commission Prepared By: EnerNex Corporation 12/3/2004 PUBLICATION # HERE Prepared By: EnerNex Corporation http://www.enernex.com/ Erich W. Gunther, Principal Investigator Jack King, Researcher Knoxville, Tennessee Contract No. C-03-06 Prepared For: California Energy Commission Michael Magaletti Contract Manager Mark Rawson Project Manager Laurie ten Hope Program Team Lead Pier Energy Systems Integration Name, Terry Surles Pier Program Director Robert L. Therkelsen Executive Director DISCLAIMER This report was prepared as the result of work sponsored by the California Energy Commission. It does not necessarily represent the views of the Energy Commission, its employees or the State of California. The Energy Commission, the State of California, its employees, contractors and subcontractors make no warrant, express or implied, and assume no legal liability for the information in this report; nor does any party represent that the uses of this information will not infringe upon privately owned rights. This report has not been approved or disapproved by the California Energy Commission nor has the California Energy Commission
    [Show full text]
  • THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered As a Newspaper at the G.P.O.)
    ~ I v , THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered as a Newspaper at the G.P.O.) Vol. CXX—No. 99 NAIROBI, 17th August, 2018 Price Sh. 60 CONTENTS GAZETTE NOTICES GAZETTE NOTICE5—(Contd.) PAGE PAGE The Human Resource Management Professionals Act- I The Insolvency Act-Winding up Order and Creditors' Appointment....................................................................... 2906 2954-2955 The National Council for Law Reporting Act- The Political Parties Act-Change of Party Officials........... 2955 Appointment....................................................................... 2906 County Government Notices ................................................... 2906-2907,2953 The Physical Planning Act-Completion of Pail Development Plans, etc .................................................... 2955-2956 The Land Registration Act-issue of Provisional Certificates, etc ................................................................... 2907-2915 Disposal of Uncollected Goods .............................................. 2956 The National Treasury-Statement of Actual Revenues and Lossof Policies .......................................... ................................ 2956-2962 Net Exchequer Issues as at 31st July, 2018 ...................... 2915-2918 Change of Names ............................................................ The Civil Aviation Act-Decisions of the Kenya Civil 2962-2963 Aviation Authority on Applications for Air Service Licences ............................................................................
    [Show full text]
  • Označením a Třídicím Znakem Uvedeným Níže (Tyto Normy Se Přejímají Pouze Tímto Oznámením Bez Vydání Titulní Strany ČSN Tiskem)
    ÚŘADU PRO TECHNICKOU NORMALIZACI, METROLOGII A STÁTNÍ ZKUŠEBNICTVÍ Číslo 2/99 OBSAH: ČÁST A - OZNÁMENÍ Oddíl 1. České technické normy ČSNI č.10/99 o vydání českých technických norem, jejich změn, oprav a zrušení str. Upozornění redakce str. ČSNI č.11/99 o schválení evropských a mezinárodních norem k přímému používání jako ČSN str. ČSNI č.12/99 o veřejném projednání návrhů norem ETSI str. ČSNI č 13/99 o vydání norem ETSI str. ČSNI č.14/99 o návrzích na zrušení ČSN str. ČSNI č.15/99 o úkolech tvorby norem zařazených do plánu str. ČSNI č. /99 o schválených EN normách a jiných dokumentech (CENELEC) - viz příloha str. ČSNI č. /99 o veřejném projednání norem EN (CENELEC) - viz příloha str. Oddíl 2. Metrologie Oddíl 3. Autorizace ÚNMZ č. 3/99 o zajištění posuzování shody prostředků zdravotnické techniky autorizovanými osobami str. Oddíl 4. Akreditace ČIA č. 2/99 o vydání osvědčení o akreditaci a o ukončení platnosti osvědčení o akreditaci str. Oddíl 5. Notifikace ÚNMZ č.2/99 Informačního střediska WTO o notifikacích Členů Dohody mezi státy ESVO a ČR a smluvních stran str. Oddíl 6. Ostatní oznámení ČÁST B - SDĚLENÍ ČÁST C - PŘEVZATÉ INFORMACE Oznámení ESČ o schválení a vydání Předpisu Elektrotechnického svazu českého podle čl. 4. odst. 6 stanov ESČ str. ČÁST A - OZNÁMENÍ Oddíl 1 – České technické normy OZNÁMENÍ č.10/99 Českého normalizačního institutu o vydání ČSN, jejich změn, oprav a zrušení Český normalizační institut podle § 4 zákona č. 22/1997 Sb., oznamuje, že byly vydány, změněny, opraveny nebo zrušeny dále uvedené ČSN: VYDANÉ ČSN 1.
    [Show full text]
  • The Representation and Exchange of Material and Other Engineering Properties
    Data Science Journal, Volume 8, 24 September 2009 THE REPRESENTATION AND EXCHANGE OF MATERIAL AND OTHER ENGINEERING PROPERTIES Norman Swindells Ferroday Limited, 14 Mere Farm Road, UK-Birkenhead, CH43 9TT Email: [email protected] ABSTRACT The representation of information and its exchange in a communication requires the use of a common information model to define the semantics and syntax of the representation and a common dictionary to define the meaning of the data items. These fundamental concepts are the basis of the new standard ISO 10303-235: 'Engineering properties for product design and verification' for the computer representation and exchange of material and any other engineering properties of a product and to provide an audit trail for the derivation of the property value. A related dictionary conforming to ISO 13584 can define testing methods and their properties and enable the information model to be used for any property of any product. Keywords: Materials properties, Data representation, Data exchange, Materials informatics, International standards 1 INTRODUCTION Engineering properties are essential information for design and manufacturing processes and play an increasing role in the management of products throughout their life-cycle, including the end-of-life phase. For these reasons it is necessary to be able to communicate the information about the meaning of these properties and their values efficiently and without ambiguity among many different software programs and to retain this information for the lifetime of the product, independently from any proprietary software. The fundamental requirement for the communication of information in a natural language is the combination of a common information model and a common dictionary.
    [Show full text]
  • Efficient Probabilistic Analysis of Offshore Wind Turbines Based On
    Efficient probabilistic analysis of offshore wind turbines based on time-domain simulations Von der Fakultät für Bauingenieurwesen und Geodäsie der Gottfried Wilhelm Leibniz Universität Hannover zur Erlangung des Grades Doktor-Ingenieur - Dr.-Ing. - genehmigte Dissertation von Clemens Janek Hübler M. Sc. 2019 Hauptreferent: Prof. Dr.-Ing. habil. Raimund Rolfes, Leibniz Universität Hannover Korreferent: Prof. John Dalsgaard Sørensen, M.Sc., Lic.techn., B.Com. Aalborg University Tag der mündlichen Prüfung: 11. Januar 2019 Abstract Offshore wind energy plays an important role in the successful implementation of the energy transition. However, without subsidies, it is not yet sufficiently competitive compared to other renewables or conventional fossil fuels. This is why offshore wind turbines have to be structurally optimised with regard to economic efficiency. One possibility to significantly increase economic efficiency is to improve the reliability or at least to assess present reliability levels precisely. For an accurate reliability assessment during the design phase, probabilistic analyses based on time-domain simulations have to be conducted. In this thesis, a methodol- ogy for a comprehensive probabilistic design of offshore wind turbines with special focus on their substructures is developed and applied. All investigations are based on time-domain simulations. This leads to more accurate results compared to semi-analytical approaches that are commonly used for probabilistic modelling at the expense of higher computing times. In contrast to previous probabilistic analyses, considering only particular aspects of the probabilistic design, this work defines a comprehensive analysis that can be split up into the following seven aspects: deterministic load model, resistance model (failure modes), uncer- tainty of inputs, design of experiments, sensitivity analysis, long-term extrapolation/lifetime distribution, and economic effects.
    [Show full text]
  • Integration Ecosystems Panel (Howard Self)
    Howard Self, ABB , Program Manager Smart Grid, May 10, 2017 GMLC Interoperability Technical Meeting © ABB June 6, 2017 | Slide 1 Utility Network Control Overview Transmission – 1970 - 1995 SCADA‪ Control Center Proprietary‪ Protocols Harris‪ 5000 CDC‪ I & II Conitel‪ 2020/3000 Telegyr‪ 6500/8979 Valmet‪ III & V PG&E‪ 2179 SES‪ 92 © ABB June 6, 2017 | Slide 2 Microprocessor Evolution(Integration Nightmare) 1988-1996, RS232,RS485 – 9600 Baud Relay/IEDs‪ Regulator‪ Controller RTU/Data‪ Concentrator GETAC‪ 2179‪ Incom‪ /Modbus ASCII Incom‪ Meter‪ IED PLC/Data‪ Concentrator SEL‪ ASCII Modbus/DNP‪ © ABB June 6, 2017 | Slide 3 The Birth of DNP3 1992-1994 through today o Open, non-proprietary o SBO (Select Before Operate) o Accurate Time Sync and Time Stamped Data o Quality flags, Internal Indications o Multiple Data Formats o Layer Separation (Link, transport, application) o Quiescent, Report-by-exception, polling o File transfer o UDP/TCP o Secure Authentication V2/V5 © ABB June 6, 2017 | Slide 4 The Need for Speed Inside the substation o Modbus Plus – 1 mb/s (Serial Taken ring) o Modbus TCP/IP – 10/100 mb/s o Profibus – 12mbs o DNP/IP – 10/100mbs o LON o UCA – 10/100 mb/s (Client/Server, Peer-to-peer) o IEC 61850 – 10/100 mb/s (Client/Server, Peer-to- peer, Sample measured Values) © ABB June 6, 2017 | Slide 5 Introduction UCA 2.0/IEC 61850 start-up UCA Project Origin: . Utility Communications Architecture (UCA) - enterprise-wide unified scheme to share all operating and management information . 1994 - EPRI member utilities called for common standard for IEDs in substations .
    [Show full text]
  • Smart Grid Standardization Documentation Map
    D2.1 – SMART GRID STANDARDIZATION DOCUMENTATION MAP The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no 318782. STARGRID FP7 - 318782 D2.1 – SMART GRID STANDARDIZATION DOCUMENTATION MAP Version V1.3 Status Final Draft Work Package WP2 Preparation Date 2013-11-08 Due Date M8 Submission Date 2013-06-28 Inés Gómez (TECNALIA) J. Emilio Rodríguez (TECNALIA) Main Author(s) Eugenia Aghinii (ASRO) Speranta Stomff (ASRO) Joseba Jimeno (TECNALIA) Christoph Nölle (IWES) Contributors Ibon Arechalde (TECNALIA) Eduardo García (TECNALIA) Eutimio Sánchez (TECNALIA) Dissemination Level PU Nature R Keywords Smart Grid, Standardization, Industry Initiatives D2.1 – Smart Grid standardization documentation map VERSION HISTORY Version Date Author(s) Comments Inés Gómez (TECNALIA) J. Emilio Rodríguez (TECNALIA) Eugenia Aghinii (ASRO) v0.1 2013-06-25 First draft Speranta Stomff (ASRO) Joseba Jimeno (TECNALIA) Christoph Nölle (IWES) Inés Gómez (TECNALIA) J. Emilio Rodríguez (TECNALIA) Eugenia Aghinii (ASRO) V0.2 2013-06-27 Final draft Speranta Stomff (ASRO) Joseba Jimeno (TECNALIA) Christoph Nölle (IWES) Inés Gómez (TECNALIA) J. Emilio Rodríguez (TECNALIA) Eugenia Aghinii (ASRO) v1.0 2013-06-28 Final version, submitted Speranta Stomff (ASRO) Joseba Jimeno (TECNALIA) Christoph Nölle (IWES) Inés Gómez (TECNALIA) J. Emilio Rodríguez (TECNALIA) Eugenia Aghinii (ASRO) V1.2 2013-07-16 Periodic review Speranta Stomff (ASRO) Joseba Jimeno (TECNALIA) Christoph Nölle (IWES) Inés Gómez (TECNALIA) J. Emilio Rodríguez (TECNALIA) Eugenia Aghinii (ASRO) V1.3 2013-11-08 Periodic review Speranta Stomff (ASRO) Joseba Jimeno (TECNALIA) Christoph Nölle (IWES) 2013-11-08 v1.3 2/312 D2.1 – Smart Grid standardization documentation map TABLE OF CONTENTS Version History................................................................................................................................................
    [Show full text]
  • Iot LSP Standard Framework Concepts 2015
    AIOTI ALLIANCE FOR INTERNET OF THINGS INNOVATION IoT LSP Standard Framework Concepts Release 2.0 AIOTI WG03 – loT Standardisation 2015 AIOTI ALLIANCE FOR INTERNET OF THINGS INNOVATION Executive Summary This deliverable introduces IoT Standards Developing Organisation (SDO), Alliance and Open Source Software (OSS) landscapes to be used as input for the recommendations for Large Scale Pilots (LSPs) standard framework and gap analysis. The LSPs can play an important role in investigating and solving specific challenges for the IoT industry and promoting innovation that is related to specific activities such as 1) the applied standards framework, 2) deployments, 3) technological and business model validation and 4) acceptability. The main objective of this deliverable is to briefly present the global dynamics and landscapes of IoT SDO, Alliance and OSS initiatives, which can be used: 1) to leverage on existing IoT standardization, industry promotion and implementation of standards and protocols, 2) as input for LSP standards framework and gap analysis and 3) to provide a guideline for the proponents of future project proposals associated with future IoT related calls financed by the EC on the positioning of these initiatives within these landscapes. AIOTI – Restricted 2 AIOTI ALLIANCE FOR INTERNET OF THINGS INNOVATION Table of Contents 1. GOAL AND MOTIVATION............................................................................................................................. 4 2. IOT SDO AND ALLIANCE INITIATIVES LANDSCAPE..........................................................................
    [Show full text]
  • Standards Published in 2010
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. ENV 13710:2000 Date published 8 AUGUST 2010 European Ordering Rules - Ordering of characters from the Latin, Greek and Cyrillic scripts 2. I.S. ENV 13801:2000 Date published 8 AUGUST 2010 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation 3. I.S. CEN TS 13853:2004 Date published 13 FEBRUARY 2010 Swap bodies for combined transport – Stackable swap bodies type C 745-S16 – Dimensions, design requirements and testing 4. I.S. EN 61360-4:2005 Date published 7 JANUARY 2010 Standard data element types with associated classification scheme for electric components -- Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005 (EQV)) 5. I.S. EN 1990:2002/A1:2006 Date published 29 MARCH 2010 Eurocode - Basis of structural design 6. I.S. EN 1991-4:2006 Date published 31 MARCH 2010 Eurocode 1 - Actions on structures - Part 4: Silos and tanks 7. I.S. EN 60512-13-5:2006/AC:2006 Date published 12 JANUARY 2010 Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13 -5:2006 (EQV)) 8. I.S. EN 60034-9:2005/A1:2007 Date published 7 JANUARY 2010 Rotating electrical machines -- Part 9: Noise limits (IEC 60034-9:2003/A1:2007 (EQV)) 9. I.S. EN 548:2004/AC:2007 Date published 8 AUGUST 2010 Resilient floor coverings - Specification for plain and decorative linoleum 10.
    [Show full text]
  • Assessment of Offshore Wind System Design, Safety, and Operation
    Assessment of Offshore Wind System Design, Safety, and Operation Standards Senu Sirnivas and Walt Musial National Renewable Energy Laboratory Bruce Bailey and Matthew Filippelli AWS Truepower LLC NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC. This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Technical Report NREL/TP-5000-60573 January 2014 Contract No. DE-AC36-08GO28308 Assessment of Offshore Wind System Design, Safety, and Operation Standards Senu Sirnivas and Walt Musial National Renewable Energy Laboratory Bruce Bailey and Matthew Filippelli AWS Truepower LLC Prepared under Task No. WE11.5057 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC. This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. National Renewable Energy Laboratory Technical Report 15013 Denver West Parkway NREL/TP-5000-60573 Golden, CO 80401 January 2014 303-275-3000 • www.nrel.gov Contract No. DE-AC36-08GO28308 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.
    [Show full text]
  • Industrial Automation
    ISO Focus The Magazine of the International Organization for Standardization Volume 4, No. 12, December 2007, ISSN 1729-8709 Industrial automation • Volvo’s use of ISO standards • A new generation of watches Contents 1 Comment Alain Digeon, Chair of ISO/TC 184, Industrial automation systems and integration, starting January 2008 2 World Scene Highlights of events from around the world 3 ISO Scene Highlights of news and developments from ISO members 4 Guest View ISO Focus is published 11 times Katarina Lindström, Senior Vice-President, a year (single issue : July-August). It is available in English. Head of Manufacturing in Volvo Powertrain and Chairman of the Manufacturing, Key Technology Committee Annual subscription 158 Swiss Francs Individual copies 16 Swiss Francs 8 Main Focus Publisher • Product data – ISO Central Secretariat Managing (International Organization for information through Standardization) the lifecycle 1, ch. de la Voie-Creuse CH-1211 Genève 20 • Practical business Switzerland solutions for ontology Telephone + 41 22 749 01 11 data exchange Fax + 41 22 733 34 30 • Modelling the E-mail [email protected] manufacturing enterprise Web www.iso.org • Improving productivity Manager : Roger Frost with interoperability Editor : Elizabeth Gasiorowski-Denis • Towards integrated Assistant Editor : Maria Lazarte manufacturing solutions Artwork : Pascal Krieger and • A new model for machine data transfer Pierre Granier • The revolution in engineering drawings – Product definition ISO Update : Dominique Chevaux data sets Subscription enquiries : Sonia Rosas Friot • A new era for cutting tools ISO Central Secretariat • Robots – In industry and beyond Telephone + 41 22 749 03 36 Fax + 41 22 749 09 47 37 Developments and Initiatives E-mail [email protected] • A new generation of watches to meet consumer expectations © ISO, 2007.
    [Show full text]