DOCSLIB.ORG

Page 1 of 37 Current Standards Activities 5/4/2014 Http

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

  • Current Standards Activities
  • Page 1 of 37

View All

Browse By Group:

New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Formal Interpretations | Informs & Certification Notices | Previous Reports

Last updated: May 2, 2014 New Publications

This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store.

  • Program
  • Standard
  • Title
  • Date Posted
  • Scope

Electrical / Electronics
CAN/CSA-C22.2 NO. 60335-2-45:14
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
4/17/2014

View Detail

(Adopted IEC 60335-2-45:2002, edition 3:2002, consolidated with amendment 1:2008 and amendment 2:2011, with Canadian deviations) Appareils électrodomestiques et analogues - Sécurité - Partie 2-45 : Règles particulières pour les outils chauffants mobiles et appareils analogues (norme CEI 60335-2-45:2002 adoptée, edition 3:2002, consolidée par l'amendement 1:2008 et l'amendement 2:2011, avec exigences propres au Canada)

  • Current Standards Activities
  • Page 2 of 37

Gas Equipment Gas Equipment
ANSI Z21.41-2014/CSA Quick disconnect devices for use with gas fuel appliances 6.9-2014
4/10/2014

View Detail

  • ANSI Z21.74-2014
  • Portable refrigerators for use with HD-5 propane gas
  • 4/10/2014

4/10/2014

View Detail View Detail

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-4-1-14
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

(Bi-national standard, with UL 60947-1)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-4-1-14
Appareillage à basse tension - Partie 4-1 : Contacteurs et démarreurs 4/10/2014 de moteurs - Contacteurs et démarreurs électromécaniques

(norme bi-nationale avec UL 60947-4-1)

View Detail

Electrical / Electronics
C22.2 NO. 75-14 C22.2 NO. 38-14
Thermoplastic insulated wires and cables

(Tri-national standard, with UL 83 and NMX-J-010-ANCE-2010)

4/4/2014 4/4/2014 4/4/2014

View Detail View Detail View Detail

Electrical / Electronics
Thermoset-insulated wires and cables

(Tri-national standard, with UL 44 and ANCE NMX-J-451-2014)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-5-2-14
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

(Bi-national standard, with UL 60947-5-2)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-5-2-14
Appareillage à basse tension - Partie 5-2: Appareils et éléments de commutation pour circuits de commande - Détecteurs de proximité

(norme binationale avec UL 60947-5-2)

4/4/2014 4/4/2014

View Detail View Detail

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-5-1-14
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

(Bi-national standard, with UL 60947-5-1)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-5-1-14
Appareillage à basse tension - Partie 5-1 : Appareils et éléments de commutation pour circuits de commande - Appareils électromécaniques pour circuits de commande
4/4/2014 4/4/2014

View Detail View Detail

(norme binationale avec UL 60947-5-1)

Electrical / Electronics
CAN/CSA-IEC 61010-2- Safety requirements for electrical equipment for measurement,

  • 201:14
  • control, and laboratory use - Part 2-201: Particular requirements for

control equipment (Adopted IEC 61020-2-201:2013, first edition, 2013 -02)

Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-201 : Exigences particulières pour les équipements de commande (norme CEI 61010-2-201:2013 adoptée, première édition, 2013-02)

  • Current Standards Activities
  • Page 3 of 37

Electrical / Electronics
CAN/CSA-C22.2 NO. 60335-2-52:14
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances (Adopted IEC 60335-2-52:2002, ed 3:2002 consolidated with amd 1:2008, with Canadian dev)
4/4/2014

View Detail

Appareils électrodomestiques et analogues - Sécurité - Partie 2-52 : Règles particulières pour les appareils d'hygiène buccale (norme CEI 60335-2-52:2002 adoptée, édition 3:2002 consolidée par l'amendement 1:2008, avec exigences propres au Canada)

  • Gas Equipment
  • ANSI NGV 3.1-

2014/CSA 12.3-2014
Fuel system components for compressed natural gas powered vehicles
4/4/2014 4/4/2014

View Detail View Detail

Construction Products and Materials
CAN/CSA-ISO 19901- 7:14
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units

(Adopted ISO 19901-7:2013, second edition, 2013-05-01)

Construction Products and Materials
CAN/CSA-ISO 19901- 7:14
Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures en mer - Partie 7 : Systèmes de maintien en position des structures en mer flottantes et des unités mobiles en mer

(norme ISO 19901-7:2013 adoptée, deuxième édition, 2013-05-01)

4/4/2014

View Detail

  • Energy
  • C656-14
  • Performance standard for split-system and single-package air

conditioners and heat pumps
4/4/2014

View Detail View Detail

Electrical / Electronics
CAN/CSA-C22.2 NO. 60601-2-6:14
Medical electrical equipment - Part 2-6: Particular requirements for the 4/4/2014 basic safety and essential performance of microwave therapy equipment (Adopted IEC 60601-2-6:2012, second edition, 2012-04, with Canadian deviations)

Appareils électromédicaux - Partie 2-6 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils de thérapie à micro-ondes (norme CEI 60601-2-6:2012 adoptée, deuxième édition, 2012-04, avec exigences propres au Canada)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60601-2-16:14
Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment (Adopted IEC 60601 -1-16:2012, 4th ed, 2012-03, with Canadian dev)
4/4/2014

View Detail

Appareils électromédicaux - Partie 2-16 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils d'hémodialyse, d'hémodiafiltration et d'hémofiltration (norme CEI 60601-2-16:2012 adoptée, quatrième édition, 2012-03, avec exigences propres au Canada)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60601-2-26:14
Medical electrical equipment - Part 2-26: Particular requirements for the basis safety and essential performance of
4/4/2014

View Detail

electroencephalographs (Adopted IEC 60601-2-26:2012, third edition,

  • Current Standards Activities
  • Page 4 of 37

2012-05, with Canadian deviations)

Appareils électromédicaux - Partie 2-26: Exigences particulières pour la sécurité de base et les performances essentielles des électroencéphalographes (norme CEI 60601-2-26:2012 adoptée, troisième édition, 2012-05, avec exigences propres au Canada)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60601-2-47:14
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems (Adopted IEC 60601-2-47:2012, second edition, 2012-02, with Canadian deviations)
4/4/2014

View Detail

Appareils électromédicaux - Partie 2-47 : Exigences particulières pour la sécurité de base et les performances essentielles des systèmes d'électrocardiographie ambulatoires (norme CEI 60601-2-47:2012 adoptée, deuxième édition, 2012-02, avec exigences propres au Canada)

Life Sciences Life Sciences

  • SPE 1112-14
  • Medical device reprocessing in community health care settings
  • 4/4/2014

  • 4/2/2014
  • CAN/CSA-ISO 5360:14 Anaesthetic vaporizers - Agent-specific filling systems

View Detail View Detail

(Adopted ISO 5360:2012, third edition, 2012-01-15)

Life Sciences Life Sciences
CAN/CSA-ISO 5360:14 Évaporateurs d'anesthésie - Systèmes de remplissage spécifiques à 4/2/2014 l'agent

(norme ISO 5360:2012 adoptée, troisième édition, 2012-01-15)

CAN/CSA-Z316.6-14 CAN/CSA-Z316.6-14
Sharps injury protection - Requirements and test methods - Sharps containers

(Adopted ISO 23907:2012, first edition, 2012-09-01, with Canadian deviations)

4/2/2014 4/2/2014

View Detail View Detail

  • Life Sciences
  • Protection contre les blessures par perforants - Exigences et

méthodes d'essai - Conteneurs pour objets coupants, tranchants et perforants

(norme ISO 23907:2012 adoptée, première édition, 2012-09-01, avec exigences propres au Canada)

Electrical / Electronics
CAN/CSA-C22.2 NO. 80601-2-55:14
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors

(Adopted ISO 80601-2-55:2011, first edition, 2011-12-15, with Canadian deviations)

4/2/2014 4/2/2014

View Detail View Detail

Electrical / Electronics
CAN/CSA-C22.2 NO. 80601-2-55:14
Appareils électromédicaux - Partie 2-55 : Exigences particulières relatives à la sécurité de base et aux performances essentielles des moniteurs de gaz respiratoires

(norme ISO 80601-2-55:2011 adoptée, première édition, 2011-12-15)

  • Current Standards Activities
  • Page 5 of 37

Electrical / Electronics
CAN/CSA-C22.2 NO. 80601-2-61:14
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment

(Adopted ISO 80601-2-61:2011, first second edition, 2011-04-01, with Canadian deviations)

4/2/2014

View Detail View Detail

Electrical / Electronics
CAN/CSA-C22.2 NO. 80601-2-61:14
Appareils électromédicaux - Partie 2-61: Exigences particulières pour 4/2/2014 la sécurité de base et les performances essentielles pour les oxymètres de pouls

(norme ISO 80601-2-61:2011 adoptée, première édition, 2011-04-01, avec exigences propres au Canada)

  • Energy
  • C873 Series-14

Z8002-14

  • Building energy estimation methodology
  • 4/1/2014

3/27/2014 3/27/2014

View Detail View Detail View Detail

Life Sciences Energy
Operation and maintenance of health care facilities

  • N288.1-14
  • Guidelines for calculating derived release limits for radioactive

material in airborne and liquid effluents for normal operation of nuclear facilities

Construction Products and Materials
S347-14 S406-14 A82-14

  • Method of test for evaluation of truss plates used in lumber joints
  • 3/27/2014

3/27/2014 3/27/2014

View Detail View Detail View Detail

Construction Products and Materials
Specification of permanent wood foundations for housing and small buildings

Construction Products and Materials
Fired masonry brick made from clay or shale

  • Gas Equipment
  • ANSI LC 1-2014/CSA

6.26-2014
Fuel gas piping systems using corrugated stainless steel tubing Type TECK 90 cable
3/27/2014 3/27/2014 3/27/2014 3/27/2014 3/27/2014 3/27/2014

View Detail View Detail View Detail View Detail View Detail View Detail

Electrical / Electronics
C22.2 NO. 131-14 C22.2 NO. 182.5-14 C22.2 NO. 291-14 C22.2 NO. 51-14 C22.2 NO. 31-14
Electrical / Electronics
Photovoltaic connectors
Electrical / Electronics
Bare and covered ferrules

(Bi-national standard, with UL 486F)

Electrical / Electronics
Armoured cables
Electrical / Electronics
Switchgear assemblies

  • Current Standards Activities
  • Page 6 of 37

Electrical / Electronics

  • C22.2 NO. 76-14
  • Splitters
  • 3/27/2014

3/27/2014

View Detail View Detail

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-4-2-14
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

(Bi-national standard, with UL 60947-4-2)

Electrical / Electronics
CAN/CSA-C22.2 NO. 60947-4-2-14
Appareillage à basse tension - Partie 4-2 : Contacteurs et démarreurs 3/27/2014 de moteurs - Gradateurs et démarreurs à semiconducteurs de moteurs à courant alternatif

View Detail

(norme binationale avec UL 60947-4-2)

Electrical / Electronics

  • C22.2 NO. 112-14
  • Electric clothes dryers

(Bi-national standard, with UL 2158)

3/27/2014

View Detail View Detail

Electrical / Electronics
CAN/CSA-C22.2 NO. 60601-2-3:14
Medical electrical equipment - Part 2-3: Particular requirements for the 3/27/2014 basic safety and essential performance of short-wave therapy equipment (Adopted IEC 60601-2-3:2012, third edition, 2012-04, with Canadian deviations)

Appareils électromédicaux - Partie 2-3: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de thérapie à ondes courtes (norme CEI 60601-2-3:2012 adoptée, troisième édition, 2012-04, avec exigences propres au Canada)

  • Energy
  • C381.2-14

G401-14
Test method for determining the energy efficiency of battery-charging 3/27/2014 systems

View Detail View Detail

Construction Products and Materials

  • Corrugated steel pipe products
  • 3/27/2014

  • Energy
  • Z245.1-14
  • Steel pipe
  • 3/27/2014

3/27/2014

View Detail View Detail

Communications / Information
CAN/CSA-ISO 1831:14 Printing specifications for optical character recognition

(Adopted ISO 1831:1980, first edition, 1980-10-15)

Communications / Information
CAN/CSA-ISO 1831:14 Spécifications d'impression des caractères pour reconnaissance optique
3/27/2014 3/27/2014 3/27/2014

View Detail View Detail View Detail

(norme ISO 1831:1980 adoptée, première édition, 1980-10-15)

Communications / Information
CAN/CSA-ISO 9241- 171:14
Ergonomics of human-system interaction - Part 171: Guidance on software accessibility

(Adopted ISO 9241-171:2008, first edition, 2008-07-15)

Communications / Information
CAN/CSA-ISO 9241- 171:14
Ergonomie de l'interaction homme-système - Partie 171: Lignes directrices relatives à l'accessibilité aux logiciels

(norme ISO 9241-171:2008 adoptée, première édition, 2008-07-15)

  • Current Standards Activities
  • Page 7 of 37

Communications / Information
CAN/CSA-ISO 9241- 20:14
Ergonomics of human-system interaction - Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
3/27/2014 3/27/2014

View Detail View Detail

(Adopted ISO 9241-20:2008, first edition, 2008-03-01)

Communications / Information
CAN/CSA-ISO 9241- 20:14
Ergonomie de l'interaction homme-système - Partie 20 : Lignes directrices sur l'accessibilité de l'équipement et des services des technologies de l'information et de la communication (TIC)

(norme ISO 9241-20:2008 adoptée, première édition, 2008-03-01)

Energy Energy Energy

  • C653-13
  • Performances photométriques des luminaires de route et de rue

Tenue en service des ampoules de remplacement à DEL
3/27/2014 3/27/2014 3/26/2014

View Detail View Detail View Detail

C871-13

  • N288.3.4-13
  • Essais de performance des systèmes d'épuration d'air radioactif des

installations nucléaires

Construction Products and Materials

  • A370-14
  • Connectors for masonry
  • 3/26/2014

View Detail

Energy Energy Energy
C875-13 B108-14 B109-14

  • Rendement des lampes directionnelles standards
  • 3/26/2014

3/26/2014

View Detail View Detail View Detail

Compressed natural gas fuelling stations installation code Natural gas for vehicles installation code - Part 1 Compressed natural 3/26/2014 gas

Gas Equipment

Gas Equipment Life Sciences
ANSI Z21.88-2014/CSA Vented gas fireplace heaters 2.33-2014
3/26/2014

View Detail View Detail

ANSI Z21.97-2014/CSA Outdoor decorative gas appliances 2.41-2014
3/26/2014

  • Z386-14
  • Safe use of lasers in health care
  • 3/20/2014

3/20/2014

View Detail View Detail

Electrical / Electronics

  • C22.2 NO. 49-14
  • Flexible cords and cables )

(Tri-national standard, with UL 62 and ANCE NMX-J-436-2014

Electrical / Electronics
C22.2 NO. 81-14 Z614-14

  • Electric irons
  • 3/20/2014

View Detail

Life Sciences Energy

  • Children's playspaces and equipment
  • 3/20/2014

3/20/2014

View Detail View Detail

ANSI Z21.50-2014/CSA Vented gas fireplaces 2.22-2014

  • Current Standards Activities
  • Page 8 of 37

Communications / Information
CAN/CSA-ISO/IEC 10918-1:14
Information technology - Digital compression and coding of continuous-tone still images: Requirements and guidelines

(Adopted ISO/IEC 10918-1:1994, first edition, 1994-02-15)

3/19/2014 3/19/2014

View Detail View Detail

Communications / Information
CAN/CSA-ISO/IEC 10918-1:14
Technologies de l'information - Compression numérique et codage des images fixes de nature photographique : Prescriptions et lignes directrices

(norme ISO/CEI 10918-1:1994 adoptée, première édition, 1994-02- 15)

Communications / Information
CAN/CSA-ISO/IEC 40500:14
Information technology - W3C web content accessibility guidelines (WCAG) 2.0

Recommended publications
  • Efficient Probabilistic Analysis of Offshore Wind Turbines Based On

    Efficient Probabilistic Analysis of Offshore Wind Turbines Based On

    Efficient probabilistic analysis of offshore wind turbines based on time-domain simulations Von der Fakultät für Bauingenieurwesen und Geodäsie der Gottfried Wilhelm Leibniz Universität Hannover zur Erlangung des Grades Doktor-Ingenieur - Dr.-Ing. - genehmigte Dissertation von Clemens Janek Hübler M. Sc. 2019 Hauptreferent: Prof. Dr.-Ing. habil. Raimund Rolfes, Leibniz Universität Hannover Korreferent: Prof. John Dalsgaard Sørensen, M.Sc., Lic.techn., B.Com. Aalborg University Tag der mündlichen Prüfung: 11. Januar 2019 Abstract Offshore wind energy plays an important role in the successful implementation of the energy transition. However, without subsidies, it is not yet sufficiently competitive compared to other renewables or conventional fossil fuels. This is why offshore wind turbines have to be structurally optimised with regard to economic efficiency. One possibility to significantly increase economic efficiency is to improve the reliability or at least to assess present reliability levels precisely. For an accurate reliability assessment during the design phase, probabilistic analyses based on time-domain simulations have to be conducted. In this thesis, a methodol- ogy for a comprehensive probabilistic design of offshore wind turbines with special focus on their substructures is developed and applied. All investigations are based on time-domain simulations. This leads to more accurate results compared to semi-analytical approaches that are commonly used for probabilistic modelling at the expense of higher computing times. In contrast to previous probabilistic analyses, considering only particular aspects of the probabilistic design, this work defines a comprehensive analysis that can be split up into the following seven aspects: deterministic load model, resistance model (failure modes), uncer- tainty of inputs, design of experiments, sensitivity analysis, long-term extrapolation/lifetime distribution, and economic effects.
  • Assessment of Offshore Wind System Design, Safety, and Operation

    Assessment of Offshore Wind System Design, Safety, and Operation

    Assessment of Offshore Wind System Design, Safety, and Operation Standards Senu Sirnivas and Walt Musial National Renewable Energy Laboratory Bruce Bailey and Matthew Filippelli AWS Truepower LLC NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC. This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Technical Report NREL/TP-5000-60573 January 2014 Contract No. DE-AC36-08GO28308 Assessment of Offshore Wind System Design, Safety, and Operation Standards Senu Sirnivas and Walt Musial National Renewable Energy Laboratory Bruce Bailey and Matthew Filippelli AWS Truepower LLC Prepared under Task No. WE11.5057 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC. This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. National Renewable Energy Laboratory Technical Report 15013 Denver West Parkway NREL/TP-5000-60573 Golden, CO 80401 January 2014 303-275-3000 • www.nrel.gov Contract No. DE-AC36-08GO28308 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.
  • Adobe Reader

    Adobe Reader

    Turinys AKTUALIJOS .................................................................................................... 5 SEMINARAS MAÞOMS IR VIDUTINËMS ÁMONËMS „DALYVAVIMAS STANDARTIZACIJOJE IR STANDARTØ TAIKYMAS – MVÁ PRIVALUMAI“ ........... 5 RENGIAMAS LST EN ISO 5667-3 VANDENS KOKYBË. MËGINIØ ËMIMAS. 3 DALIS. VANDENS MËGINIØ KONSERVAVIMAS IR APDOROJIMAS (ISO 5667-3:2012) LIETUVIØ KALBA .................................................................. 5 SUKURTA PAGRINDINIØ MAÐINØ SRITIES TERMINØ DUOMENØ BAZË, PALENGVINANTI STANDARTØ RENGIMÀ NACIONALINËMIS KALBOMIS ......... 6 ISO SEMINARAS APIE ENERGIJOS VADYBOS STANDARTÀ ISO 50001, JO TAIKYMO GALIMYBES IR NAUDÀ VYKO VILNIUJE ...................................... 6 STANDARTIZACIJA .......................................................................................... 9 INFORMACIJA APIE VIEÐAJAI APKLAUSAI TEIKIAMUS EUROPOS IR LIETUVOS STANDARTØ BEI KITØ LEIDINIØ PROJEKTUS ................................ 9 IÐLEISTI LIETUVOS STANDARTAI IR KITI LEIDINIAI ........................................... 9 NETEKÆ GALIOS LIETUVOS STANDARTAI IR KITI LEIDINIAI .............................. 16 NETEKSIANTIS GALIOS LIETUVOS STANDARTAS ............................................. 21 SIÛLOMAS SKELBTI NETEKSIANÈIU GALIOS ORIGINALUSIS LIETUVOS STANDARTAS ................................................................................... 21 TARPTAUTINIØ IR EUROPOS ÁSTAIGØ BEI ORGANIZACIJØ STANDARTAI IR KITI LEIDINIAI, KURIUOS DEPARTAMENTAS GAVO KOVO MËNESÁ .................. 22 TARPTAUTINËS STANDARTIZACIJOS
  • I.ICT-2011-285135 FINSENY D1.11 Version 1.0 Security Elements for the FINSENY Functional Architecture

    I.ICT-2011-285135 FINSENY D1.11 Version 1.0 Security Elements for the FINSENY Functional Architecture

    Ref. Ares(2014)490312 - 25/02/2014 FINSENY D1.11 , Version 1.0 I.ICT-2011-285135 FINSENY D1.11 version 1.0 Security Elements for the FINSENY Functional Architecture Contractual Date of Delivery to the CEC: March 30 th , 2013 Actual Date of Delivery to the CEC: March 30 th , 2013 Author(s): Lionel Besson, Steffen Fries, Andreas Furch, Henryka Jormakka, Fabienne Waidelich, Maria M artin-De-Vidales-Ramirez Participant(s): Siemens AG, Thales, VTT, Atos Research & Innovation Workpackage: WP1, Task 1.6 Security Estimated person months: (resources spent on the deliverable) Security: PU Nature: R Version: 1.0 Total number of pages: 134 Abstract: Deliverable D1.11 presents all FINSENY security elements, especially including the energy domain specific security elements needed for the FINSENY scenarios. These are described as enablers, constraints, general elements countermeasures, or controls. Scenario specific security elements needed for FINSENY are also analyzed. It represents a direct continuation of deliverable D1.10 [181] and therefore fully includes its structure and content. Keyword list: Threat and risk analysis, security, risk assessment, interfaces, security requirements, scenario, use case, system analysis, authentication, authorization, privacy, confidentiality, trust domain, availability, reliability, functional architecture, security enablers, security standards, security elements, FINSENY, FI- WARE Disclaimer: Page 1 (134) FINSENY D1.11 , Version 1.0 Not applicable. Page 2 (134) FINSENY D1.11 , Version 1.0 Executive Summary D1.11, titled “Security Elements for the FINSENY Functional Architecture” is a direct continuation of deliverable D1.10 [181] and therefore fully includes the structure and contents of it. D1.11 is thus as well based upon a threat and risk analysis which led to the definition of a set of security requirements that can be applied to all scenario work packages and a scenario specific security requirement.
  • Twincat 3 Wind Framework for Wind Turbine Automation 1 Framework and 10 Years of Expertise Through 40,000 Installations

    Twincat 3 Wind Framework for Wind Turbine Automation 1 Framework and 10 Years of Expertise Through 40,000 Installations

    cover PC Control | Wind Special 2015 PC Control | Wind Special 2015 cover TwinCAT 3 Wind Framework for wind turbine automation 1 Framework and 10 years of expertise through 40,000 installations The new TwinCAT 3 Wind Framework will enable manufacturers of wind turbines to program their systems quickly and easily on their own. All functions are integrated into one universal software package: from event management to database connectivity, and even basic func- ttitionsonns susuchch aass sststateate macmachinehine anandd hyhydraulics.draulics. A preprefabricatedf application template considerably sisimplifiesmmplifies tthehhe pprogrammingrogramming pprocess,rocess, enablienablingng ddevelopers to concentrate on the essential sysystemstem ffunctions.unctions. The resuresult:lt: efefficientficient enengineering,gineering shorter time-to-market, and the benefits oof IndIndustryusttry 4.4.00 foforr ththee wind indindustry.ustry. © AREVA Wind/Jan Oelker cover PC Control | Wind Special 2015 Cloud Database TwinCAT Transport Layer – ADS Proxy Database TcCOM TcCOM Status Parameter Command TcCOM TcCOM TcCOM Statistics Capture User Framework (Generic) Framework TcCOM TcCOM TcCOM TwinCAT 3 Wind Library PLC Supervisory Operational Simulation TcCOM Control Control Pitch Rotor Generator Converter Yaw Template (Specifi c) Fieldbus Application templates and encapsulated Comprehensive functionalities are implemented in encapsulated TwinCAT mod- ules, which are then integrated into the TwinCAT 3 architecture. Efficient soft- modules enable modular software ware development is ensured through a modular architecture in the application architecture with high functionality template, as well as through proven and directly applicable TwinCAT modules and functions. The flexible configuration makes adaptation to user-specific application requirements very straightforward. System diagnostic functionality Beckhoff has offered advanced wind industry solutions for over 16 years.
  • Communication Network Standards for Smart Grid Infrastructures

    Communication Network Standards for Smart Grid Infrastructures

    Article Communication Network Standards for Smart Grid Infrastructures Konstantinos Demertzis 1,2,* , Konstantinos Tsiknas 3, Dimitrios Taketzis 4 , Dimitrios N. Skoutas 5 , Charalabos Skianis 5, Lazaros Iliadis 2 and Kyriakos E. Zoiros 3 1 Department of Physics, Faculty of Sciences, Kavala Campus, International Hellenic University, 65404 St. Loukas, Greece 2 Faculty of Mathematics Programming and General Courses, School of Civil Engineering, Democritus University of Thrace, Kimmeria, 67100 Xanthi, Greece; [email protected] 3 Department of Electrical and Computer Engineering, Democritus University of Thrace, Vas. Sofias 12, 67100 Xanthi, Greece; [email protected] (K.T.); [email protected] (K.E.Z.) 4 Hellenic National Defense General Staff, Stratopedo Papagou, Mesogeion 227-231, 15561 Athens, Greece; [email protected] 5 Department of Information and Communication Systems Engineering, University of the Aegean, Samos, 83200 Karlovassi, Greece; [email protected] (D.N.S.); [email protected] (C.S.) * Correspondence: [email protected] Abstract: Upgrading the existing energy infrastructure to a smart grid necessarily goes through the provision of integrated technological solutions that ensure the interoperability of business processes and reduce the risk of devaluation of systems already in use. Considering the heterogeneity of the current infrastructures, and in order to keep pace with the dynamics of their operating environment, we should aim to the reduction of their architectural complexity and the addition of new and more efficient technologies and procedures. Furthermore, the integrated management of the Citation: Demertzis, K.; Tsiknas, K.; overall ecosystem requires a collaborative integration strategy which should ensure the end-to-end Taketzis, D.; Skoutas, D.N.; Skianis, interconnection under specific quality standards together with the establishment of strict security C.; Iliadis, L.; Zoiros, K.E.
  • Communication Network Architectures for Smart-Wind Power Farms

    Communication Network Architectures for Smart-Wind Power Farms

    Energies 2014, 7, 3900-3921; doi:10.3390/en7063900 OPEN ACCESS energies ISSN 1996-1073 www.mdpi.com/journal/energies Article Communication Network Architectures for Smart-Wind Power Farms Mohamed A. Ahmed 1 and Young-Chon Kim 2,* 1 Department of Computer Engineering, Chonbuk National University, Jeonju 561-756, Korea; E-Mail: [email protected] 2 Smart Grid Research Center, Chonbuk National University, Jeonju 561-756, Korea * Author to whom correspondence should be addressed; E-Mail: [email protected]; Tel.: +82-63-270-2413; Fax: +82-63-270-2394. Received: 11 February 2014; in revised form: 28 May 2014 / Accepted: 9 June 2014 / Published: 23 June 2014 Abstract: Developments in the wind power industry have enabled a new generation of wind turbines with longer blades, taller towers, higher efficiency, and lower maintenance costs due to the maturity of related technologies. Nevertheless, wind turbines are still blind machines because the control center is responsible for managing and controlling individual wind turbines that are turned on or off according to demand for electricity. In this paper, we propose a communication network architecture for smart-wind power farms (Smart-WPFs). The proposed architecture is designed for wind turbines to communicate directly and share sensing data in order to maximize power generation, WPF availability, and turbine efficiency. We also designed a sensor data frame structure to carry sensing data from different wind turbine parts such as the rotor, transformer, nacelle, etc. The data frame includes a logical node ID (LNID), sensor node ID (SNID), sensor type (ST), and sensor data based on the International Electrotechnical Commission (IEC) 61400-25 standard.
  • HZN Oglasnik Za Normativne Dokumente 3

    HZN Oglasnik Za Normativne Dokumente 3

    Hrvatski zavod za norme Oglasnik za normativne dokumente 3/2013 lipanj, 2013. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 2 Rezultati međunarodne i europske 1.1 Hrvatske norme ............................................................ A3 normizacije razvrstani po predmetnom ustroju .................................................A57 1.2 Nacrti hrvatskih norma ............................................... A28 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ... A28 3 Popis radnih dokumenata Codex Alimentariusa 1.4 Povučene hrvatske norme.......................................... A38 1.5 Povučeni nacrti hrvatskih norma ....................................... 4 Obavijesti HZN-a 4.1 Cjenik hrvatskih norma 1.6 Ispravci hrvatskih norma .............................................A52 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku........................................................A53 1.8 Drugi normativni dokumenti 1.9 Opća izdanja HZN-a A2 HZN
  • Final Report Standards for Smart Grids

    Final Report Standards for Smart Grids

    Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Status: approved by the CEN/CENELEC/ETSI Joint Presidents Group (JPG) on 4 May 2011, subject to the formal approval by 2011-06-05 by the individual ESOs Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Foreword < to be added> Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Contents 1. Executive summary .................................................................................................................................. 6 2. Introduction ............................................................................................................................................... 8 2.1 Basic idea of smart grids ..................................................................................................................... 9 2.2 Current political background in Europe ............................................................................................. 11 2.3 Aim of a European standardization report ........................................................................................ 11 2.4 Standardization activities around the world ...................................................................................... 13 3. Description of the overall concept ....................................................................................................... 17 3.1
  • Evaluation of OCPP and IEC 61850 for Smart Charging Electric Vehicles

    Evaluation of OCPP and IEC 61850 for Smart Charging Electric Vehicles

    World Electric Vehicle Journal Vol. 6 - ISSN 2032-6653 - © 2013 WEVA Page Page 0863 EVS27 Barcelona, Spain, November 17 - 20, 2013 Evaluation of OCPP and IEC 61850 for Smart Charging Electric Vehicles Jens Schmutzler1, Claus Amtrup Andersen2, Christian Wietfeld1 1Dortmund University of Technology, Communication Networks Institute, Dortmund, Germany, EMails: [email protected], [email protected] 2EURISCO Research & Development, Odense, Denmark, EMails: [email protected] Abstract Interoperability of charging infrastructures is a key success factor for E-Mobility. Standards like ISO/IEC 15118 and IEC 61851-1 are developed to ensure base level interoperability of front-end com- munication and signaling processes for smart charging between electric vehicles and charge spots. With the Open Charge Point Protocol (OCPP) a forum of European industry members also moves towards a common back-end protocol for charge spots intending to reduce and secure overall investment costs. However, in the current form OCPP lacks means for enabling grid services based on smart charging. In this paper the authors provide a review of today’s state of the art in ISO/IEC standardization of the V2G Interface and furthermore detail how OCPP could leverage existing standardization efforts for grid automation from IEC 61850 in order to overcome its shortcomings. Keywords: Smart Charging, OCPP, IEC 61850, ISO/IEC 15118, Vehicle-to-Grid Communication Interface, V2G 1 Introduction beneficial to standardize back-end integration as- pects of charging infrastructures in the long term. With the introduction of EVs certain challenges According to the European Commission’s cli- arise for the power grid since it was deployed mate and energy targets set in 2007 as well as at times, when such additional loads were not following directives like 2009/28/EC [1] on the yet considered.
  • XEM Product Line Technical Differentiators

    XEM Product Line Technical Differentiators

    XEM Product Line Technical Differentiators Introduction The Xelas Energy Management (XEM) 61850 product line architecture is built for seamless smart grid management: • Seamless between 61850 clients and servers • Seamless between existing non 61850 equipment/applications and 61850 compliant equipment/applications • Seamless between the Operations functions (OT) and the information functions (IT), between control centre (OT) and back office (IT) This is a substantial step ahead from basic “stack vendors”. With XEM product line building blocks, a wide range of business solutions can be realized. • Using XEM 61850 Client development and/or Server development it is easy to add, test, and verify IEC 61850 management capabilities to your equipment or applications. • Using XEM dynamic integration framework, the network management communication with equipment and applications using different protocols and legacy is made easy, changeable and manageable. Below we list the key technical advantages, the principles and their importance. We have sorted them, divided in IT features, OT features and generic architectural features. Leading Information Technology (IT) features • Fully modular and distributed architecture (using TCP- IP). • The various XEM components (client adapters, server adapters, database, integration adapters, and translators) communicate using TCP-IP. This enables easy distributed component implementation and ensures the re-use of functions and logic among the XEM components. The overall system is therefore completely extensible and scalable, and configured for carrier grade availability (99,99x %). • Fully customizable scripting environment o All functions are described using scripts, which can be easily developed and adapted (also with a runtime license). The scripts range from elementary operations functions, to full test suite scripts, user-case scripts, “standard” administrative actions scripts and report scripts.
  • Recently Completed September October 2013

    Recently Completed September October 2013

    Current Standards Activities Page 1 of 21 Browse By Group: View All New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Formal Interpretations | Informs & Certification Notices | Previous Reports Last updated: November 5, 2013 New Publications This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store. Program Standard Title Date Posted Scope Energy C900.1-13 Heat meters - Part 1: General requirements 10/31/2013 View Detail (Adopted EN 1434-1:2007, second edition, 2007-02, with Canadian deviations) Energy C900.2-13 Heat meters - Part 2: Constructional requirements 10/31/2013 View Detail (Adopted EN 1434-2:2007, second edition, 2007-02, with Canadian deviations) Energy C900.3-13 Heat meters - Part 3: Data exchange and interfaces 10/31/2013 View Detail (Adopted EN 1434-3:2008, second edition, 2008-10) Energy C900.4-13 Heat meters - Part 4: Pattern approval tests 10/31/2013 View Detail (Adopted EN 1434-4:2007, second edition, 2007-02, with Canadian deviations) http://standardsactivities.csa.ca/standardsactivities/recent_infoupdate.asp 11/5/2013 Current Standards Activities Page 2 of 21 Energy C900.5-13 Heat meters - Part 5: Initial verification tests 10/31/2013 View Detail (Adopted EN 1434-5:2007, second edition, 2007-02) Energy C900.6-13 Heat meters - Part 6: Installation, commissioning, operational 10/31/2013 View Detail monitoring and maintenance (Adopted EN 1434-6:2007, second edition, 2007-02) Electrical / C22.1HB-12 Guide explicatif du CCÉ, Explication des articles du code canadien de 10/31/2013 View Detail Electronics l'électricité, Première partie Construction W59-13 Welded steel construction (metal arc welding) 10/28/2013 View Detail Products and Materials Construction CSA B45.8-13/IAPMO Terrazzo, concrete, and natural stone plumbing fixtures 10/17/2013 View Detail Products and Z403-2013 Materials Electrical / C22.2 NO.