DOCSLIB.ORG

NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE Za Obdobie Od 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE Za Obdobie Od 1 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. 7. 2020 do 31. 7. 2020 Documents Title Closing date 17A/1279/CD IEC TS 62271-316 ED1: High-voltage switchgear and controlgear - Part 316: Direct current by-pass switches and 2020-09-25 paralleling switches 17C/752(F)/CDV IEC 62271-215 Ed. 1: Phase comparator 2020-09-04 20/1916/CDV IEC 62893-1/AMD1 ED1: Amendment 1 - Charging cables for electric vehicles for rated voltages up to and including 2020-09-25 0,6/1 kV - Part 1: General requirements 33/648/CDV IEC 63210 ED1: Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage above 1000 V 2020-09-25 34/710/DTS IEC TS 63105 ED1: Lighting systems and related equipment - Vocabulary 2020-09-25 45/892/CDV IEC 62372 ED2: Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic 2020-09-25 resolution 45A/1348/FDIS IEC 63046 ED1: Nuclear power plants - Electrical power system - General requirements 2020-08-14 48B/2821/CDV IEC 61076-3-122 ED2: Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail 2020-09-25 specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in industrial environments 57/2244/CD IEC 62351-5 ED1: Power systems management and associated information exchange - Data and communications 2020-09-25 security - Part 5: Security for IEC 60870-5 and derivatives 57/2245/CD IEC 61968-9 ED3: Application integration at electric utilities - System interfaces for distribution management - Part 9: 2020-09-25 Interfaces for meter reading and control 59/737/CD IEC 63237-10 ED1: Household and similar electrical appliances - Product information properties - Part 10: List of 2020-09-25 properties (LOP) for washing machines 61C/861/FDIS IEC 60335-2-24 ED8: Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for 2020-08-14 refrigerating appliances, ice-cream appliances and ice makers 62B/1169/CDV IEC 61223-3-7 ED1: Evaluation and routine testing in medical imaging departments – Acceptance testing and quality 2020-09-25 control of dental extra-oral X-ray equipment used with dental cone beam computed tomography 65B/1178(F)/FDIS IEC 62828-4 ED1: Reference conditions and procedures for testing industrial and process measurement transmitters - 2020-07-24 Part 4: Specific procedures for level transmitters 65B/1179(F)/FDIS IEC 62828-5 ED1: Reference conditions and procedures for testing industrial and process measurement transmitters - 2020-07-24 Part 5: Specific procedures for flow transmitters 69/720/CD IEC 61980-2 ED1: Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for 2020-09-25 communication between electric road vehicle (EV) and infrastructure 82/1760/FDIS IEC 60904-1 ED3: Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics 2020-08-14 86A/2011/CDV IEC 60794-2-11/AMD1 ED3: Amendment 1 - Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for 2020-09-25 simplex and duplex cables for use in premises cabling Page 1 of 7 86A/2012/CDV IEC 60794-2-21/AMD1 ED3: Amendment 1 - Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for 2020-09-25 multi-fibre optical distribution cables for use in premises cabling 86A/2013/CDV IEC 60794-2-31/AMD1 ED3: Amendment 1 - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for 2020-09-25 optical fibre ribbon cables for use in premises cabling 86A/2032/DTR IEC TR 62959 ED1: Optical fibre cables - Shrinkage effects on cable and cable element end termination – Guidance 2020-08-28 86B/4292(F)/CDV IEC 61753-111-8 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 2020-09-18 111-8: Sealed closures for Category G - Ground 100/3439/CDV IEC 62680-1-3 ED4: Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type- 2020-09-25 C® Cable and Connector Specification 100/3440/CDV IEC 62680-1-2 ED5: Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power 2020-09-25 Delivery specification 105/807/CD IEC 62282-6-101 ED1: Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General 2020-09-25 requirements 105/808/CD IEC 62282-6-106 ED1: <p>Fuel cell technologies – Part 6-106: Micro fuel cell power systems – Safety – Indirect Class 2020-09-25 8 (corrosive) compounds</p> 105/809/CD IEC 62282-6-107 ED1: Fuel cell technologies - Part 6-107: Micro fuel cell power systems – Safety – Indirect water- 2020-09-25 reactive (Division 4.3) compounds 115/242/CD IEC TS 62344 ED2: Design of earth electrode stations for high-voltage direct current (HVDC) links - General 2020-09-25 guidelines 119/313/CD PWI TR 119-15 ED1: Future IEC TR 62899-550-1: Quality assessment - Framework document on durability testing 2020-09-25 120/187/CD IEC TS 62933-2-2 ED1: Electric Energy Storage Systems; Part 2-2: Unit parameters and testing methods – 2020-08-28 Applications and Performance testing SyCLVDC/86/CD IEC 63318 ED1: ELECTRICITY ACCESS REQUIREMENTS WITH SELV DC FOR TIER II AND TIER III OF ESMAP 2020-09-25 MULTI-TIER FRAMEWORK FOR HOUSE HOLD ELECTRICITY SUPPLY CABPUB/186/CD ISO/IEC CD 17030 Conformity assessment – General requirements for third-party marks of conformity 2020-09-25 2/2010/FDIS IEC 60034-7 ED3: Rotating electrical machines - Part 7: Classification of types of construction, mounting 2020-08-21 arrangements and terminal box position (IM Code) 2/2011/FDIS IEC 60034-11 ED3: Rotating electrical machines - Part 11: Thermal protection 2020-08-21 18A/429/CDV IEC 60092-360 ED2: Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and 2020-10-02 offshore units, power, control, instrumentation and telecommunication cables 22F/585/CD IEC TR 62001-1 ED2: High-voltage direct current (HVDC) systems - Guidance to the specification and design 2020-09-04 evaluation of AC filters - Part 1: Overview 22F/586/CD IEC TR 62001-4 ED2: High-voltage direct current (HVDC) systems - Guidance to the specification and design 2020-09-04 evaluation of AC filters - Part 4: Equipment 23A/904/CDV IEC 61386-21 ED2: Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems 2020-10-02 23A/905/CDV IEC 61386-22 ED2: Conduit Systems for cable management - Part 22: Particular requirements - Pliable conduit 2020-10-02 systems 23A/906/CDV IEC 61386-23 ED2: Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit 2020-10-02 systems Page 2 of 7 26/702/CDV IEC 60974-8 ED3: Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems 2020-10-02 26/703/CDV IEC 60974-11 ED4: Arc welding equipment - Part 11: Electrode holders 2020-10-02 26/704/CDV IEC 60974-13 ED2: Arc welding equipment - Part 13: Welding clamp 2020-10-02 34C/1492/CD IEC 61347-1 ED4: Lamp controlgear - Part 1: General and safety requirements 2020-10-02 34C/1493/CD IEC 61347-2-1 ED2: Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters) 2020-10-02 34C/1494/CD IEC 61347-2-2 ED3: Controlgear for electric light sources– Part 2-2: Particular requirements for DC or AC supplied 2020-10-02 electronic step-down convertors for filament lamps 34C/1495/CD IEC 61347-2-3 ED3: Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic 2020-10-02 control gear for fluorescent lamps 34C/1496/CD IEC 61347-2-8 ED2: Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps 2020-10-02 34C/1497/CD IEC 61347-2-10 ED2: <p>Controlgear for electric light sources - Part 2-10: Particular requirements for electronic 2020-10-02 invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)</p> 34C/1498/CD IEC 61347-2-11 ED2: Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used 2020-10-02 with luminaires 34C/1499/CD IEC 61347-2-12 ED2: Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic 2020-10-02 controlgear for discharge lamps (excluding fluorescent lamps) 34C/1500/CD IEC 61347-2-13 ED3: Controlgear for electric light sources - Part 2-13: Particular requirements for d.c. or a.c. supplied 2020-10-02 electronic controlgear for LED modules 40/2760/CD IEC 60393-3 ED3: Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary precision 2020-10-02 potentiometers 40/2761/CD IEC 60115-8 ED3: Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface 2020-10-02 mount resistors 62B/1170/CDV IEC 60601-2-65/AMD2 ED1: Amendment 2 - Medical electrical equipment - Part 2-65: Particular requirements for the 2020-10-02 basic safety and essential performance of dental intra-oral X-ray equipment 62B/1171/CDV IEC 62563-2 ED1: Medical electrical equipment - Medical image display systems - Acceptance and constancy tests 2020-10-02 62C/763/CD IEC 61675-1 ED3: Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission 2020-09-04 tomographs 62D/1778/FDIS ISO 80601-2-67 ED2: Medical electrical equipment - Part 2-67: Particular requirements for basic safety and essential 2020-08-21 performance of oxygen-conserving equipment 65E/739/FDIS IEC 62769-100 ED1: Field Device
Load more

Recommended publications
  • Proceedings 2005
    LAC2005 Proceedings 3rd International Linux Audio Conference April 21 – 24, 2005 ZKM | Zentrum fur¨ Kunst und Medientechnologie Karlsruhe, Germany Published by ZKM | Zentrum fur¨ Kunst und Medientechnologie Karlsruhe, Germany April, 2005 All copyright remains with the authors www.zkm.de/lac/2005 Content Preface ............................................ ............................5 Staff ............................................... ............................6 Thursday, April 21, 2005 – Lecture Hall 11:45 AM Peter Brinkmann MidiKinesis – MIDI controllers for (almost) any purpose . ....................9 01:30 PM Victor Lazzarini Extensions to the Csound Language: from User-Defined to Plugin Opcodes and Beyond ............................. .....................13 02:15 PM Albert Gr¨af Q: A Functional Programming Language for Multimedia Applications .........21 03:00 PM St´ephane Letz, Dominique Fober and Yann Orlarey jackdmp: Jack server for multi-processor machines . ......................29 03:45 PM John ffitch On The Design of Csound5 ............................... .....................37 04:30 PM Pau Arum´ıand Xavier Amatriain CLAM, an Object Oriented Framework for Audio and Music . .............43 Friday, April 22, 2005 – Lecture Hall 11:00 AM Ivica Ico Bukvic “Made in Linux” – The Next Step .......................... ..................51 11:45 AM Christoph Eckert Linux Audio Usability Issues .......................... ........................57 01:30 PM Marije Baalman Updates of the WONDER software interface for using Wave Field Synthesis . 69 02:15 PM Georg B¨onn Development of a Composer’s Sketchbook ................. ....................73 Saturday, April 23, 2005 – Lecture Hall 11:00 AM J¨urgen Reuter SoundPaint – Painting Music ........................... ......................79 11:45 AM Michael Sch¨uepp, Rene Widtmann, Rolf “Day” Koch and Klaus Buchheim System design for audio record and playback with a computer using FireWire . 87 01:30 PM John ffitch and Tom Natt Recording all Output from a Student Radio Station .
    [Show full text]
  • Report on Voting on Document Xx
    SMB/5309/R For IEC use only 2014-05-02 INTERNATIONAL ELECTROTECHNICAL COMMISSION STANDARDIZATION MANAGEMENT BOARD SUBJECT SMB meeting 150, agenda item 5.3, Frankfurt Report of SEG-3, AAL, System Evaluation Group – Ambient Assisted Living, following the meeting held on 2014-03-10 to 12 in Brussels, Belgium BACKGROUND SEG-AAL held its first meeting on 2014-03-10 to 12 in Brussels, answering the invitation of its Belgian member. The next date for the meeting of the SEG or the committee succeeding the SEG is planned in conjunction with the general meeting of the European AAL Joint Programme, on 2014-09-08 to 09, in Bucharest, Romania. On March 10, SEG-AAL held a workshop with CENELEC in order to exchange experiences and ongoing actions in the field of AAL. Please see the workshop brochure in annex. SEG-AAL had its plenary session on March 11 and 12. The report is in two parts: Part A – Recommendations submitted to the SMB for formal approval: A1 to A4 Part B – Status of Work Annex 1 – SEG-AAL members attending the meeting Annex 2 – SG 5 membership list Annex 3 – SEG-AAL / CENELEC workshop brochure Annex 4 – SEG-AAL final report ACTION The SMB is invited to decide on the recommendations submitted in Part A, using the Technical Server, before 2014-05-30, and to note Part B. Item 1: A1 Membership of SEG-AAL: Members of the former SG5-AAL Item 2: A2 External membership of SEG-AAL: Continua Health Alliance Item 3: A3 External membership of SEG-AAL: AALIANCE2 Item 4: A4 Transition from SEG-AAL to SYC-AAL Secretariat note: item 4 is not the final decision on creating a SyC on AAL – that decision will be taken at the SMB meeting 150 following discussion on all the comments received, i.e.
    [Show full text]
  • Standards Published in 2010
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. ENV 13710:2000 Date published 8 AUGUST 2010 European Ordering Rules - Ordering of characters from the Latin, Greek and Cyrillic scripts 2. I.S. ENV 13801:2000 Date published 8 AUGUST 2010 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation 3. I.S. CEN TS 13853:2004 Date published 13 FEBRUARY 2010 Swap bodies for combined transport – Stackable swap bodies type C 745-S16 – Dimensions, design requirements and testing 4. I.S. EN 61360-4:2005 Date published 7 JANUARY 2010 Standard data element types with associated classification scheme for electric components -- Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005 (EQV)) 5. I.S. EN 1990:2002/A1:2006 Date published 29 MARCH 2010 Eurocode - Basis of structural design 6. I.S. EN 1991-4:2006 Date published 31 MARCH 2010 Eurocode 1 - Actions on structures - Part 4: Silos and tanks 7. I.S. EN 60512-13-5:2006/AC:2006 Date published 12 JANUARY 2010 Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13 -5:2006 (EQV)) 8. I.S. EN 60034-9:2005/A1:2007 Date published 7 JANUARY 2010 Rotating electrical machines -- Part 9: Noise limits (IEC 60034-9:2003/A1:2007 (EQV)) 9. I.S. EN 548:2004/AC:2007 Date published 8 AUGUST 2010 Resilient floor coverings - Specification for plain and decorative linoleum 10.
    [Show full text]
  • Progress File (Standards Publications)
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 62129:2006 Date published 18 OCTOBER 2008 Calibration of optical spectrum analyzers (IEC 62129:2006 (EQV)) 2. I.S. EN 61076-2-101:2003/A1:2006 Date published 18 OCTOBER 2008 Connectors for electronic equipment -- Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw- locking for low voltage applications (IEC 61076-2-101:2003/A1:2006 (EQV)) 3. I.S. EN 60464-1:1999/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 1: Definitions and general requirements (IEC 60464-1:1998/A1:2006 (EQV)) 4. I.S. EN 60464-3-1:2001/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 1: Ambient curing finishing varnishes (IEC 60464-3-1:2001/A1:2006 (EQV)) 5. I.S. EN 62329-1:2006 Date published 18 OCTOBER 2008 Heat shrinkable moulded shapes -- Part 1: Definitions and general requirements (IEC 62329-1:2005 (EQV)) 6. I.S. EN 61755-1:2006 Date published 18 OCTOBER 2008 Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non- dispersion shifted fibres - General and guidance (IEC 61755-1:2005 (EQV)) 7. I.S. EN 60454-3-8:2006 Date published 18 OCTOBER 2008 Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3 -8:2006 (EQV)) 8.
    [Show full text]
  • 57-61968-5-Ed1-FDIS
    IEC 61968-5 ED1 © IEC:2020 – 1 – 1 CONTENTS 2 3 FOREWORD ........................................................................................................................... 4 4 INTRODUCTION ..................................................................................................................... 6 5 Scope ..................................................................................................................................... 8 6 Normative references .............................................................................................................. 9 7 Terms, definitions and abbreviated terms .............................................................................. 10 8 3.1 Terms and definitions............................................................................................ 10 9 3.3 Abbreviated terms ................................................................................................. 10 10 Conventions .......................................................................................................................... 11 11 DER enterprise integration use cases ................................................................................... 11 12 5.1 General ................................................................................................................. 11 13 5.2 DER Group Creation ............................................................................................. 14 14 5.3 Maintenance of DERGroups .................................................................................
    [Show full text]
  • IEC-International Electrotechnical Commission
    Standards Manager Web Standards List IEC-International Electrotechnical Commission Id Number Title Year Organization Page 1 60034-2-3 Rotating electrical machines _ Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC 2020 IEC motors - Edition 1.0 2 60034-3 Rotating electrical machines _ Part 3: Specific requirements for synchronous generators driven by steam turbines or 2020 IEC combustion gas turbines and for synchronous compensators - Edition 7.0 3 60034-5 Rotating electrical machines _ Part 5: Degrees of protection provided by the integral design of rotating electrical machines 2020 IEC (IP code) _ Classification - Edition 5.0 4 60034-7 Rotating electrical machines _ Part 7: Classification of types of construction, mounting arrangements and terminal box 2020 IEC position (IM Code) - Edition 3.0 5 60034-11 Rotating electrical machines _ Part 11: Thermal protection - Edition 3.0 2020 IEC 6 60034-18-42 Rotating electrical machines _ Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating 2020 IEC electrical machines fed from voltage converters _ Qualification tests - Edition 1.1; Consolidated Reprint 7 60045-1 Steam turbines _ Part 1: Specifications - Edition 2.0 2020 IEC 8 60050-113 NULL 2020 IEC AMD 2 9 60050-113 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) _ Part 113: Physics for electrotechnology - Edition 1.0 2020 IEC AMD 3 10 60050-151 AMENDMENT 4 International Electrotechnical Vocabulary (IEV) _ Part 151: Electrical and magnetic devices
    [Show full text]
  • Superseded by a Later Version of This Document
    Superseded by a later version of this document. OpenCable Specifications OpenCable Host Device 2.1 Core Functional Requirements OC-SP-HOST2.1-CFR-I01-070720 ISSUED Notice This OpenCable document is the result of a cooperative effort undertaken at the direction of Cable Television Laboratories, Inc. for the benefit of the cable industry and its customers. This document may contain references to other documents not owned or controlled by CableLabs. Use and understanding of this document may require access to such other documents. Designing, manufacturing, distributing, using, selling, or servicing products, or providing services, based on this document may require intellectual property licenses for technology referenced in the document. Neither CableLabs nor any member company is responsible to any party for any liability of any nature whatsoever resulting from or arising out of use or reliance upon this document, or any document referenced herein. This document is furnished on an "AS IS" basis and neither CableLabs nor its members provides any representation or warranty, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of this document, or any document referenced herein. © Copyright 2006 - 2007 Cable Television Laboratories, Inc. All rights reserved. OC-SP-HOST2.1-CFR-I01-070720 OpenCableTM Specifications Document Status Sheet Document Control Number: OC-SP-HOST2.1-CFR-I01-070720 Document Title: OpenCable Host Device 2.1 Core Functional Requirements Revision History: I01 - OC-SP-HOST2.1-CFR-I01-070720 Date: July 20, 2007 Status: Work in Draft Issued Closed Progress Distribution Restrictions: author CL/Member CL/ Member/ Public only Vendor Key to Document Status Codes: Work in Progress An incomplete document, designed to guide discussion and generate feedback that may include several alternative requirements for consideration.
    [Show full text]
  • Final Report Standards for Smart Grids
    Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Status: approved by the CEN/CENELEC/ETSI Joint Presidents Group (JPG) on 4 May 2011, subject to the formal approval by 2011-06-05 by the individual ESOs Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Foreword < to be added> Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Contents 1. Executive summary .................................................................................................................................. 6 2. Introduction ............................................................................................................................................... 8 2.1 Basic idea of smart grids ..................................................................................................................... 9 2.2 Current political background in Europe ............................................................................................. 11 2.3 Aim of a European standardization report ........................................................................................ 11 2.4 Standardization activities around the world ...................................................................................... 13 3. Description of the overall concept ....................................................................................................... 17 3.1
    [Show full text]
  • Common Information Model (CIM) European Style Market Profile User Guide
    1 European Network of Transmission System Operators for Electricity ENTSO-E Common information model (CIM) European style market profile User guide 2017-01-03 VERSION 3.0 ENTSO-E AISBL • Avenue de Cortenbergh, 100 • 1000 Brussels • Belgium • Tel +32 2 741 09 50 • Fax +32 2 741 09 51 • [email protected] • www.entsoe.eu European Network of ENTSO-E Common information model (CIM) European style market profile user guide Transmission System Operators for Electricity VERSION 3.0 2 Copyright notice: 3 Copyright © ENTSO-E. All Rights Reserved. 4 This document and its whole translations may be copied and furnished to other s, and 5 derivative works that comment on or otherwise explain it or assist in its implementation may 6 be prepared, copied, published and distributed, in whole or in part, without restriction of any 7 kind, provided that the above copyright notice and this paragraph are included on all such 8 copies and derivative works. However, this document itself may not be modified in any way, 9 except for literal and whole translation into languages other than English and under all 10 circumstances, the copyright notice or references to ENTSO-E may not be removed. 11 This document and the information contained herein is provided on an "as is" basis. 12 ENTSO-E DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT 13 LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT 14 INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR 15 FITNESS FOR A PARTICULAR PURPOSE. 16 Maintenance notice: 17 This document is maintained by the ENTSO-E WG EDI.
    [Show full text]
  • Etsi Ts 103 491 V1.2.1 (2019-05)
    ETSI TS 103 491 V1.2.1 (2019-05) TECHNICAL SPECIFICATION DTS-UHD Audio Format; Delivery of Channels, Objects and Ambisonic Sound Fields 2 ETSI TS 103 491 V1.2.1 (2019-05) Reference RTS/JTC-DTS-UHDv121 Keywords audio, codec, object audio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI deliverable is the one made publicly available in PDF format at www.etsi.org/deliver. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI.
    [Show full text]
  • Technical Report
    This is a preview - click here to buy the full publication IEC/TR 62357-1 ® Edition 1.0 2012-10 TECHNICAL REPORT colour inside Power systems management and associated information exchange – Part 1: Reference architecture INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XE ICS 33.200 ISBN 978-2-83220-445-0 Warning! Make sure that you obtained this publication from an authorized distributor. ® Registered trademark of the International Electrotechnical Commission This is a preview - click here to buy the full publication – 2 – TR 62357-1 © IEC:2012(E) CONTENTS FOREWORD ........................................................................................................................... 7 INTRODUCTION ..................................................................................................................... 9 0.1 General ............................................................................................................................ 9 0.2 Objectives and overview of this technical report ............................................................... 9 0.3 Rationale ........................................................................................................................ 10 0.4 Trend toward model driven architectures and integration ................................................ 10 0.5 Purpose of the reference architecture ............................................................................. 11 0.6 Scope of reference architecture .....................................................................................
    [Show full text]
  • Chapter 1 - Introduction 1
    AN INVESTIGATION INTO THE USE OF IEEE 1394 FOR AUDIO AND CONTROL DATA DISTRIBUTION IN MUSIC STUDIO ENVIRONMENTS. A thesis submitted in fulfilment of the requirements for the degree of MASTER OF SCIENCE of RHODES UNIVERSITY By ROBERT ALAN LAUBSCHER February 1999 Abstract i Abstract This thesis investigates the feasibility of using a new digital interconnection technology, the IEEE-1394 High Performance Serial Bus, for audio and control data distribution in local and remote music recording studio environments. Current methods for connecting studio devices are described, and the need for a new digital interconnection technology explained. It is shown how this new interconnection technology and developing protocol standards make provision for multi-channel audio and control data distribution, routing, copyright protection, and device synchronisation. Feasibility is demonstrated by the implementation of a custom hardware and software solution. Remote music studio connectivity is considered, and the emerging standards and technologies for connecting future music studio utilising this new technology are discussed. Acknowledgements ii Acknowledgements I gratefully acknowledge the significant help and guidance received from Richard Foss, the supervisor of my work. I would also like to thank the people from industry who have shown interest in this work and provided answers to my many questions, especially Bob Moses, Robert Sloan, Yoshi Sawada, and Dick Scheel. The reader should be aware that many trademarks are mentioned throughout this thesis.
    [Show full text]