Standards Manager Web Standards List IEC-International Electrotechnical Commission

Id Number Title Year Organization Page 1 60034-2-3 Rotating electrical machines _ Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC 2020 IEC motors - Edition 1.0 2 60034-3 Rotating electrical machines _ Part 3: Specific requirements for synchronous generators driven by steam turbines or 2020 IEC combustion gas turbines and for synchronous compensators - Edition 7.0 3 60034-5 Rotating electrical machines _ Part 5: Degrees of protection provided by the integral design of rotating electrical machines 2020 IEC (IP code) _ Classification - Edition 5.0 4 60034-7 Rotating electrical machines _ Part 7: Classification of types of construction, mounting arrangements and terminal box 2020 IEC position (IM Code) - Edition 3.0 5 60034-11 Rotating electrical machines _ Part 11: Thermal protection - Edition 3.0 2020 IEC 6 60034-18-42 Rotating electrical machines _ Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating 2020 IEC electrical machines fed from voltage converters _ Qualification tests - Edition 1.1; Consolidated Reprint 7 60045-1 Steam turbines _ Part 1: Specifications - Edition 2.0 2020 IEC 8 60050-113 NULL 2020 IEC AMD 2 9 60050-113 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) _ Part 113: Physics for electrotechnology - Edition 1.0 2020 IEC AMD 3 10 60050-151 AMENDMENT 4 International Electrotechnical Vocabulary (IEV) _ Part 151: Electrical and magnetic devices - Edition 2020 IEC AMD 4 2.0 11 60050-300 AMENDMENT 4 International Electrotechnical Vocabulary (IEV) _ Part 300: Electrical and electronic measurements and 2020 IEC AMD 4 measuring instruments _ Part 313: Types of electrical measuring instruments - Edition 1.0 12 60050-395 AMENDMENT 2 International Electrotechnical Vocabulary (IEV) _ Part 395: Nuclear instrumentation _ Physical 2020 IEC AMD 2 phenomena, basic concepts, instruments, systems, equipment and detectors - Edition 1.0 13 60050-426 International Electrotechnical Vocabulary (IEV) _ Part 426: Explosive atmospheres - Edition 3.0 2020 IEC 14 60050-447 International Electrotechnical Vocabulary (IEV) _ Part 447: Measuring relays and protection equipment - Edition 2.0 2020 IEC 15 60050-466 AMENDMENT 1 International Electrotechnical Vocabulary (IEV) _ Part 466: Overhead lines - Edition 1.0 2020 IEC AMD 1 16 60050-485 International Electrotechnical Vocabulary (IEV) _ Part 485: Fuel cell technologies - Edition 1.0 2020 IEC 17 60050-561 AMENDMENT 2 International Electrotechnical Vocabulary (IEV) _ Part 561: Piezoelectric, dielectric and electrostatic 2020 IEC AMD 2 devices and associated materials for frequency control, selection and detection - Edition 2.0 18 60050-601 AMENDMENT 2 International Electrotechnical Vocabulary (IEV) _ Part 601: Generation, transmission and distribution of 2020 IEC AMD 2 electricity _ General - Edition 1.0 19 60050-705 AMENDMENT 5 International Electrotechnical Vocabulary (IEV) _ Part 705: Radio wave propagation - Edition 1.0 2020 IEC AMD 5 20 60050-723 AMENDMENT 6 International Electrotechnical Vocabulary (IEV) _ Part 723: Broadcasting: Sound, television, data - 2020 IEC AMD 6 Edition 1.0 21 60050-726 AMENDMENT 5 International Electrotechnical Vocabulary (IEV) _ Part 726: Transmission lines and waveguides - 2020 IEC AMD 5 Edition 1.0 22 60050-731 AMENDMENT 5 International Electrotechnical Vocabulary (IEV) _ Part 731: Optical fibre communication - Edition 1.0 2020 IEC AMD 5 23 60050-741 International Electrotechnical Vocabulary (IEV) _ Part 741: Internet of Things (IoT) - Edition 1.0 2020 IEC 24 60050-815 AMENDMENT 2 International Electrotechnical Vocabulary (IEV) _ Part 815: Superconductivity - Edition 2.0 2020 IEC AMD 2 25 60050-845 NULL 2020 IEC AMD 3 26 60050-845 International electrotechnical vocabulary (IEV) _ Part 845: Lighting - Edition 2.0 2020 IEC 27 60050-881 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) _ Part 881: Radiology and radiological physics - 2020 IEC AMD 3 Edition 1.0 28 60061-1 AMD Amendment 60 Lamp caps and holders together with gauges for the control of interchangeability and safety _ Part 1: Lamp 2020 IEC 60 caps - Edition 3.35 29 60061-2 AMD Amendment 55 Lamp caps and holders together with gauges for the control of interchangeability and safety _ Part 2: 2020 IEC 55 Lampholders - Edition 3.32 30 60061-2 AMD Amendment 56 Lamp caps and holders together with gauges for the control of interchangeability and safety _ Part 2: 2020 IEC 56 Lampholders - Edition 3.32 31 60061-3 AMD Amendment 57 Lamp caps and holders together with gauges for the control of interchangeability and safety _ Part 3: 2020 IEC 57 Gauges - Edition 3.44 32 60061-3 AMD Amendment 58 Lamp caps and holders together with gauges for the control of interchangeability and safety _ Part 3: 2020 IEC 58 Gauges - Edition 3.44 33 60068-3-7 Environmental testing _ Part 3-7: Supporting documentation and guidance _ Measurements in temperature chambers for 2020 IEC tests A (Cold) and B (Dry heat) (with load) - Edition 2.0 34 60076-10-1 Power transformers _ Part 10-1: Determination of sound levels _ Application guide - Edition 2.1; CONSOLIDATED 2020 IEC VERSION 35 60076-11-2018 NULL 2020 IEC ISH1 36 60076-22-7 Power transformers _ Part 22-7: Power transformer and reactor fittings _ Accessories and fittings - Edition 1.0 2020 IEC 37 60076-24 Power transformers _ Part 24: Specification of voltage regulating distribution transformers (VRDT) - Edition 1.0 2020 IEC 38 60079-0 CORR Explosive atmospheres _ Part 0: Equipment _ General requirements - Edition 7.0 2020 IEC 1 39 60079-1-2014 NULL 2020 IEC ISH1 40 60079-6 Explosive atmospheres _ Part 6: Equipment protection by liquid immersion "o" - Edition 4.1; Consolidated Reprint 2020 IEC 41 60079-14-2013 NULL 2020 IEC ISH2 42 60079-25 Explosive atmospheres _ Part 25: Intrinsically safe electrical systems - Edition 3.0 2020 IEC CORR 1 43 60079-25 Explosive atmospheres _ Part 25: Intrinsically safe electrical systems - Edition 3.0 2020 IEC 44 60079-29-1 Explosive atmospheres _ Part 29-1: Gas detectors _ Performance requirements of detectors for flammable gases - Edition 2020 IEC 2.1; Consolidated Reprint 45 60086-4 CORR PRIMARY BATTERIES _ Part 4: Safety of lithium batteries - Edition 5.0 2020 IEC 2 46 60086-4-2019 NULL 2020 IEC ISH1 47 60086-6 Primary batteries _ Part 6: Guidance on environmental aspects - Edition 1.0 2020 IEC 48 60092-350 Electrical installations in ships _ Part 350: General construction and test methods of power, control and instrumentation 2020 IEC cables for shipboard and offshore applications - Edition 5.0 49 60092-354 Electrical installations in ships _ Part 354: Single- and three-core power cables with extruded solid insulation for rated 2020 IEC voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) - Edition 4.0 50 60098 Analogue Audio Disk Records and Reproducing Equipment - Edition 4.0 2020 IEC 51 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials - Edition 5.0 2020 IEC 52 60115-1 Fixed resistors for use in electronic equipment _ Part 1: Generic specification - Edition 5.0 2020 IEC 53 60120 Ball and socket couplings of string insulator units _ Dimensions - Edition 4.0 2020 IEC 54 60127-2 Miniature fuses _ Part 2: Cartridge fuse-links - Edition 3.1; Consolidated Reprint 2020 IEC 55 60127-3 Miniature fuses _ Part 3: Sub-miniature fuse-links - Edition 3.1; ; Consolidated Reprint 2020 IEC 56 60172 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires - Edition 5.0 2020 IEC 57 60191-2 AMD AMENDMENT 21 Mechanical standardization of semiconductor devices _ Part 2: Dimensions - Edition 1.0 2020 IEC 21 58 60238 Edison screw lampholders - Edition 9.2; consolidated reprint 2020 IEC 59 60263 Scales and sizes for plotting frequency characteristics and polar diagrams - Edition 4.0 2020 IEC 60 60268-7 Sound system equipment _ Part 7: Headphones and earphones - Edition 3.1; Consolidated reprint 2020 IEC 61 60268-16 Sound system equipment _ Part 16: Objective rating of speech intelligibility by speech transmission index - Edition 5.0 2020 IEC 62 60268-22 Sound system equipment _ Part 22: Electrical and mechanical measurements on transducers - Edition 1.0 2020 IEC 63 60282-1 High-voltage fuses _ Part 1: Current-limiting fuses - Edition 8.0 2020 IEC 64 60282-4 High-voltage fuses _ Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators 2020 IEC - Edition 1.0 65 60296 Fluids for electrotechnical applications _ Mineral insulating oils for electrical equipment - Edition 5.0 2020 IEC 66 60317-0-2 Specifications for particular types of winding wires _ Part 0-2: General requirements _ Enamelled rectangular copper wire - 2020 IEC Edition 4.0 67 60317-0-4 Specifications for particular types of winding wires _ Part 0-4: General requirements _ Glass-fibre wound, resin or varnish 2020 IEC impregnated, bare or enamelled rectangular copper wire - Edition 4.0 68 60317-0-6 Specifications for particular types of winding wires _ Part 0-6: General requirements _ Glass-fibre wound resin or varnish 2020 IEC impregnated, bare or enamelled round copper wire - Edition 2.0 69 60317-12 Specifications for particular types of winding wires _ Part 12: Polyvinyl acetal enamelled round copper wire, class 120 - 2020 IEC Edition 4.0 70 60317-17 Specifications for particular types of winding wires _ Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 2020 IEC 105 - Edition 4.0 71 60317-18 Specifications for particular types of winding wires _ Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 2020 IEC 120 - Edition 4.0 72 60317-25 Specifications for particular types of winding wires _ Part 25: Polyester or polyesterimide overcoated with polyamide- 2020 IEC imide enamelled round aluminium wire, class 200 - Edition 4.0 73 60317-27-1 Specifications for particular types of winding wires _ Part 27-1: Paper tape covered round copper wire - Edition 1.0 2020 IEC 74 60317-27-2 Specifications for particular types of winding wires _ Part 27-2: Paper tape covered round aluminium wire - Edition 1.0 2020 IEC 75 60317-27-4 Specifications for particular types of winding wires _ Part 27-4: Paper tape covered rectangular aluminium wire - Edition 2020 IEC 1.0 76 60317-60-1 Specifications for particular types of winding wires _ Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or 2020 IEC enamelled rectangular copper wire, temperature index 155 - Edition 1.0 77 60317-60-2 Specifications for particular types of winding wires _ Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, 2020 IEC bare or enamelled rectangular copper wire, temperature index 155 - Edition 1.0 78 60317-61 Specifications for particular types of winding wires _ Part 61: Polyester glass-fibre wound, resin or varnish impregnated, 2020 IEC bare or enamelled rectangular copper wire, temperature index 180 - Edition 2.0 79 60317-62 Specifications for particular types of winding wires _ Part 62: Polyester glass-fibre wound, silicone resin or varnish 2020 IEC impregnated, bare or enamelled rectangular copper wire, temperature index 200 - Edition 2.0 80 60317-70-1 Specifications for particular types of winding wires _ Part 70-1: Polyester glass-fibre wound unvarnished and fused, bare or 2020 IEC enamelled round copper wire, temperature index 155 - Edition 1.0 81 60317-70-2 Specifications for particular types of winding wires _ Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, 2020 IEC bare or enamelled round copper wire, temperature index 155 - Edition 1.0 82 60317-71 Specifications for particular types of winding wires _ Part 71: Polyester glass-fibre wound and resin or varnish 2020 IEC impregnated, bare or enamelled round copper wire, temperature index 180 - Edition 2.0 83 60317-72 Specifications for particular types of winding wires _ Part 72: Polyester glass-fibre wound silicone resin/varnish 2020 IEC impregnated, bare or enamelled round copper wire, temperature index 200 - Edition 2.0 84 60317-82 Specifications for particular types of winding wires _ Part 82: Polyesterimide enamelled rectangular copper wire, class 200 2020 IEC - Edition 1.0 85 60335-1 Household and similar electrical appliances _ Safety _ Part 1: General requirements - Edition 6.0 2020 IEC 86 60335-2-24 Household and similar electrical appliances _ Safety _ Part 2-24: Particular requirements for refrigerating appliances, ice- 2020 IEC cream appliances and ice-makers - Edition 8.0 87 60335-2-25 Household and similar electrical appliances _ Safety_ Part 2-25: Particular requirements for microwave ovens, including 2020 IEC combination microwave ovens - Edition 7.0 88 60335-2-35 Household and similar electrical appliances _ Safety _ Part 2-35: Particular requirements for instantaneous water heaters - 2020 IEC Edition 5.2; Consolidated Reprint 89 60335-2-81 Household and similar electrical appliances _ Safety _ Part 2-81: Particular requirements for foot warmers and heating mats 2020 IEC - Edition 3.2; Consolidated Reprint 90 60335-2-82 Household and similar electrical appliances _ Safety _ Part 2-82: Particular requirements for amusement machines and 2020 IEC personal service machines - Edition 3.1; Consolidated Reprint 91 60335-2-107 Household and similar electrical appliances _ Safety _ Part 2-107: Particular requirements for robotic battery powered 2020 IEC electrical lawnmowers - Edition 2.1; Consolidated Reprint 92 60335-2-118 Household and similar electrical appliances _ Safety _ Part 2-118: Particular requirements for professional ice-cream 2020 IEC makers - Edition 1.0 93 60336 Medical electrical equipment _ X-ray tube assemblies for medical diagnosis _ Focal spot dimensions and related 2020 IEC characteristics - Edition 5.0 94 60352-3 Solderless connections _ Part 3: Accessible insulation displacement (ID) connections _ General requirements, test methods 2020 IEC and practical guidance - Edition 2.0 95 60352-4 Solderless connections _ Part 4: Non-accessible insulation displacement (ID) connections _ General requirements, test 2020 IEC methods and practical guidance - Edition 2.0 96 60352-5 Solderless connections _ Part 5: Press-in connections _ General requirements, test methods and practical guidance - Edition 2020 IEC 5.0 97 60352-7 Solderless connections _ Part 7: Spring clamp connections _ General requirements, test methods and practical guidance - 2020 IEC Edition 2.0 98 60364-5-53 Low-voltage electrical installations _ Part 5-53: Selection and erection of electrical equipment _ Devices for protection for 2020 IEC safety, isolation, switching, control and monitoring - Edition 4.1; Consolidated Reprint 99 60372 Locking devices for ball and socket couplings of string insulator units _ Dimensions and tests - Edition 4.0 2020 IEC 100 60384-11 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT _ Part 11: Sectional specification _ Fixed 2020 IEC CORR 1 polyethylene-terephthalate film dielectric metal foil DC capacitors - Edition 4.0 101 60384-13 Fixed capacitors for use in electronic equipment _ Part 13: Sectional specification _ Fixed polypropylene film dielectric 2020 IEC metal foil DC capacitors - Edition 5.0 102 60384-26 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT _ Part 26: Sectional specification _ Fixed aluminium 2020 IEC CORR 1 electrolytic capacitors with conductive polymer solid electrolyte - Edition 2.0 103 60400 Lampholders for tubular fluorescent lamps and starterholders - Edition 8.1; Consolidated Reprint 2020 IEC 104 60401-1 Terms and nomenclature for cores made of magnetically soft ferrites _ Part 1: Terms used for physical irregularities and 2020 IEC reference of dimensions - Edition 2.0 105 60404-8-5 Magnetic materials _ Part 8-5: Specifications for individual materials _ Electrical steel strip and sheet with specified 2020 IEC mechanical properties and magnetic polarization - Edition 2.0 106 60404-8-7 Magnetic materials _ Part 8-7: Specifications for individual materials _ Cold-rolled grain-oriented electrical steel strip and 2020 IEC sheet delivered in the fully-processed state - Edition 5.0 107 60417 Snapshot NULL 2020 IEC 108 60436 CORR 1 Electric dishwashers for household use _ Methods for measuring the performance - Edition 4.1 2020 IEC 109 60436 Electric dishwashers for household use _ Methods for measuring the performance - Edition 4.1; Consolidated Reprint 2020 IEC 110 60471 Clevis and tongue couplings of string insulator units _ Dimensions - Edition 3.0 2020 IEC 111 60512-9-5 Connectors for electrical and electronic equipment _ Tests and measurements _ Part 9-5: Endurance tests _ Test 9e: Current 2020 IEC loading, cyclic - Edition 2.0 112 60519-1 Safety in installations for electroheating and electromagnetic processing _ Part 1: General requirements - Edition 6.0 2020 IEC 113 60519-8 Safety in installations for electroheating and electromagnetic processing _ Part 8: Particular requirements for electroslag 2020 IEC remelting furnaces - Edition 3.0 114 60522-1 Medical electrical equipment _ Diagnostic X-rays _ Part 1: Determination of quality equivalent filtration and permanent 2020 IEC filtration - Edition 1.0 115 60559 NULL 2020 IEC 116 60565-1 Underwater acoustics _ Hydrophones _ Calibration of hydrophones _ Part 1: Procedures for free-field calibration of 2020 IEC hydrophones - Edition 1.0 117 60598-1 Luminaires _ Part 1: General requirements and tests - Edition 9.0 2020 IEC 118 60598-2-1 Luminaires _ Part 2-1: Particular requirements _ Fixed general purpose luminaires - Edition 2.0 2020 IEC 119 60598-2-23 Luminaires _ Part 2-23: Particular requirements _ Extra-low-voltage lighting systems for ELV light sources - Edition 2.0 2020 IEC 120 60601-1-2 Medical electrical equipment _ Part 1-2: General requirements for basic safety and essential performance _ Collateral 2020 IEC Standard: Electromagnetic disturbances _ Requirements and tests - Edition 4.1; Consolidated Reprint 121 60601-1-6 Medical electrical equipment _ Part 1-6: General requirements for basic safety and essential performance _ Collateral 2020 IEC standard: Usability - Edition 3.2; Consolidated Reprint 122 60601-1-8 Medical electrical equipment _ Part 1-8: General requirements for basic safety and essential performance _ Collateral 2020 IEC standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems - Edi 123 60601-1-9 Medical electrical equipment _ Part 1-9: General requirements for basic safety and essential performance _ Collateral 2020 IEC Standard: Requirements for environmentally conscious design - Edition 1.2; Consolidated Reprint 124 60601-1-10 Medical electrical equipment _ Part 1-10: General requirements for basic safety and essential performance _ Collateral 2020 IEC Standard: Requirements for the development of physiologic closed-loop controllers - Edition 1.2 Consolidated Reprint 125 60601-1-11 Medical electrical equipment _ Part 1-11: General requirements for basic safety and essential performance _ Collateral 2020 IEC Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment - Edition 126 60601-1-12 Medical electrical equipment _ Part 1-12: General requirements for basic safety and essential performance _ Collateral 2020 IEC Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical service 127 60601-1 Medical electrical equipment _ Part 1: General requirements for basic safety and essential performance - Edition 3.2; 2020 IEC Consolidated Reprint; Incorporates Amendment 1: 2012, Corrigenda 1: 12/2012, Corrigenda to Amendment 1: 07/2014, Interpretation 1: 04/200 128 60601-2-1 Medical electrical equipment _ Part 2-1: Particular requirements for the basic safety and essential performance of electron 2020 IEC accelerators in the range 1 MeV to 50 MeV - Edition 4.0 129 60601-2-19 Medical electrical equipment _ Part 2-19: Particular requirements for the basic safety and essential performance of infant 2020 IEC incubators - Edition 3.0 130 60601-2-20 Medical electrical equipment _ Part 2-20: Particular requirements for the basic safety and essential performance of infant 2020 IEC transport incubators - Edition 3.0 131 60601-2-21 Medical electrical equipment _ Part 2-21: Particular requirements for the basic safety and essential performance of infant 2020 IEC radiant warmers - Edition 3.0 132 60601-2-31 Medical electrical equipment _ Part 2-31: Particular requirements for the basic safety and essential performance of external 2020 IEC cardiac pacemakers with internal power source - Edition 3.0 133 60601-2-35 Medical electrical equipment _ Part 2-35: Particular requirements for the basic safety and essential performance of heating 2020 IEC devices using blankets, pads or mattresses and intended for heating in medical use - Edition 2.0 134 60601-2-50 Medical electrical equipment _ Part 2-50: Particular requirements for the basic safety and essential performance of infant 2020 IEC phototherapy equipment - Edition 3.0 135 60603-7 Connectors for electronic equipment _ Part 7: Detail specification for 8-way, unshielded, free and fixed connectors - 2020 IEC Edition 4.0 136 60633 CORR 1 High-voltage direct current (HVDC) transmission _ Vocabulary - Edition 3.0 2020 IEC 137 60645-3 Electroacoustics _ Audiometric equipment _ Part 3: Test signals of short duration - Edition 3.0 2020 IEC 138 60664-1 CORR Insulation coordination for equipment within low-voltage supply systems _ Part 1: Principles, requirements and tests - 2020 IEC 1 Edition 3.0 139 60664-1 Insulation coordination for equipment within low-voltage supply systems _ Part 1: Principles, requirements and tests - 2020 IEC Edition 3.0 140 60667-1 Vulcanized fibre for electrical purposes _ Part 1: Definitions and general requirements - Edition 2.0 2020 IEC 141 60667-2 Vulcanized fibre for electrical purposes _ Part 2: Methods of test - Edition 2.0 2020 IEC 142 60667-3-1 Vulcanized fibre for electrical purposes _ Part 3: Specifications for individual materials _ Sheet 1: Flat sheets - Edition 2.0 2020 IEC 143 60669-1 CORR NULL 2020 IEC 1 144 60675-2 Household electric direct-acting room heaters _ Methods for measuring performance _ Part 2: Additional provisions for the 2020 IEC measurement of the radiant factor - Edition 1.0 145 60675-3 Household electric direct-acting room heaters _ Methods for measuring performance _ Part 3: Additional provisions for the 2020 IEC measurement of radiation efficiency - Edition 1.0 146 60704-2-1 Household and similar electrical appliances _ Test code for the determination of airborne acoustical noise _ Part 2-1: 2020 IEC Particular requirements for dry vacuum cleaners - Edition 4.0 147 60704-2-7 Household and similar electrical appliances _ Test code for the determination of airborne acoustical noise _ Part 2-7: 2020 IEC Particular requirements for fans - Edition 2.0 148 60704-2-8 Household and similar electrical appliances _ Test code for the determination of airborne acoustical noise _ Part 2-8: 2020 IEC Particular requirements for electric shavers, hair clippers or trimmers - Edition 2.0 149 60704-2-17 NULL 2020 IEC 150 60721-3-0 Classification of environmental conditions _ Part 3-0: Classification of groups of environmental parameters and their 2020 IEC severities _ Introduction - Edition 2.0 151 60730-1 Automatic electrical controls _ Part 1: General requirements - Edition 5.2; Consolidated Reprint 2020 IEC 152 60730-2-9 Automatic electrical controls _ Part 2-9: Particular requirements for temperature sensing controls - Edition 4.2; 2020 IEC Consolidated Reprint 153 60747-5-5 Semiconductor devices _ Part 5-5: Optoelectronic devices _ Photocouplers - Edition 2.0 2020 IEC 154 60747-16-5 NULL 2020 IEC CORR 1 155 60747-16-5 Semiconductor devices _ Part 16-5: Microwave integrated circuits _ Oscillators - Edition 1.1; Consolidated Reprint 2020 IEC 156 60747-17 Semiconductor devices _ Part 17: Magnetic and capacitive coupler for basic and reinforced insulation - Edition 1.0 2020 IEC 157 60747-18-2 Semiconductor devices _ Part 18-2: Semiconductor bio sensors _ Evaluation process of lens-free CMOS photonic array 2020 IEC sensor package modules - Edition 1.0 158 60749-15 Semiconductor devices _ Mechanical and climatic test methods _ Part 15: Resistance to soldering temperature for through- 2020 IEC hole mounted devices - Edition 3.0 159 60749-20 Semiconductor devices _ Mechanical and climatic test methods _ Part 20: Resistance of plastic encapsulated SMDs to the 2020 IEC combined effect of moisture and soldering heat - Edition 3.0 160 60749-30 Semiconductor devices _ Mechanical and climatic test methods _ Part 30: Preconditioning of non-hermetic surface mount 2020 IEC devices prior to reliability testing - Edition 2.0 161 60749-41 Semiconductor devices _ Mechanical and climatic test methods _ Part 41: Standard reliability testing methods of non- 2020 IEC volatile memory devices - Edition 1.0 162 60779 Installations for electroheating and electromagnetic processing _ Test methods for electroslag remelting furnaces - Edition 2020 IEC 3.0 163 60794-1-21 Optical fibre cables _ Part 1-21: Generic specification _ Basic optical cable test procedures _ Mechanical test methods - 2020 IEC Edition 1.1; Consolidated Reprint 164 60794-1-215 Optical fibre cables _ Part 1-215: Generic specification _ Basic optical cable test procedures _ Environmental test methods 2020 IEC _ Cable external freezing test, Method F15 - Edition 1.0 165 60794-2-11 Optical fibre cables _ Part 2-11: Indoor cables _ Detailed specification for simplex and duplex cables for use in premises 2020 IEC cabling - Edition 3.1; Consolidated Reprint 166 60794-2-21 Optical fibre cables _ Part 2-21: Indoor cables _ Detailed specification for multi-fibre optical distribution cables for use in 2020 IEC premises cabling - Edition 3.1; Consolidated Reprint 167 60794-2-31 Optical fibre cables _ Part 2-31: Indoor cables _ Detailed specification for optical fibre ribbon cables for use in premises 2020 IEC cabling - Edition 3.1; Consolidated Reprint 168 60794-2-50 Optical fibre cables _ Part 2-50: Indoor cables _ Family specification for simplex and duplex cables for use in terminated 2020 IEC cable assemblies - Edition 2.0 169 60794-6-10 Optical fibre cables _ Part 6-10: Indoor-outdoor cables _ Family specification for universal indoor-outdoor cables - Edition 2020 IEC 1.0 170 60794-6-20 Optical fibre cables _ Part 6-20: Indoor-outdoor cables _ Family specification for flame retardant outdoor cables - Edition 2020 IEC 1.0 171 60794-6-30 Optical fibre cables _ Part 6-30: Indoor-outdoor cables _ Family specification for weatherised indoor cables - Edition 1.0 2020 IEC 172 60794-6 Optical fibre cables _ Part 6: Indoor-outdoor cables _ Sectional specification for indoor-outdoor cables - Edition 1.0 2020 IEC 173 60838-1 Miscellaneous lampholders _ Part 1: General requirements and tests - Edition 5.2; Consolidated Reprint 2020 IEC 174 60839-11-5 No Title - Edition 1.0 2020 IEC 175 60840 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV 2020 IEC (Um = 170 kV) _ Test methods and requirements - Edition 5.0 176 60895 Live working _ Conductive clothing - Edition 3.0 2020 IEC 177 60898-1 CORR NULL 2020 IEC 1 178 60900 CORR 2 LIVE WORKING _ HAND TOOLS FOR USE UP TO 1 000 V AC AND 1 500 V DC - Edition 4.0 2020 IEC 179 60904-1 Photovoltaic devices _ Part 1: Measurement of photovoltaic current-voltage characteristics - Edition 3.0 2020 IEC 180 60904-4 CORR NULL 2020 IEC 1 181 60904-9 Photovoltaic devices _ Part 9: Classification of solar simulator characteristics - Edition 3.0 2020 IEC 182 60904-10 Photovoltaic devices _ Part 10: Methods of linear dependence and linearity measurements - Edition 3.0 2020 IEC 183 60947-1 Low-voltage switchgear and controlgear _ Part 1: General rules - Edition 6.0 2020 IEC 184 60947-3 Low-voltage switchgear and controlgear _ Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination 2020 IEC units - Edition 4.0 185 60947-4-1 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR _ Part 4-1: Contactors and motor-starters _ Electromechanical 2020 IEC CORR 1 contactors and motor-starters - Edition 4.0 186 60947-4-1-2018 NULL 2020 IEC ISH1 187 60947-4-2 Low-voltage switchgear and controlgear _ Part 4-2: Contactors and motor-starters _ Semiconductor motor controllers, 2020 IEC starters and soft-starters - Edition 4.0 188 60947-4-3 Low-voltage switchgear and controlgear _ Part 4-3: Contactors and motor-starters _ Semiconductor controllers and 2020 IEC semiconductor contactors for non-motor loads - Edition 3.0 189 60947-5-1 Low-voltage switchgear and controlgear _ Part 5-1: Control circuit devices and switching elements _ Electromechanical 2020 IEC CORR 2 control circuit devices - Edition 4.0 190 60947-5-8 Low-voltage switchgear and controlgear _ Part 5-8: Control circuit devices and switching elements _ Three-position 2020 IEC enabling switches - Edition 2.0 191 60947-6-2 Low-voltage switchgear and controlgear _ Part 6-2: Multiple function equipment _ Control and protective switching 2020 IEC devices (or equipment) (CPS) - Edition 3.0 192 60974-10 Arc welding equipment _ Part 10: Electromagnetic compatibility (EMC) requirements - Edition 4.0 2020 IEC 193 61000-3-2 Electromagnetic compatibility (EMC) _ Part 3-2: Limits _ Limits for harmonic current emissions (equipment input current 2020 IEC ?16 A per phase) - Edition 5.1; CONSOLIDATED VERSION 194 61000-4-3 Electromagnetic compatibility (EMC) _ Part 4-3: Testing and measurement techniques _ Radiated, radio-frequency 2020 IEC electromagnetic field immunity test - Edition 4.0 195 61000-4-11 ELECTROMAGNETIC COMPATIBILITY (EMC) _ Part 4-11: Testing and measurement techniques _ Voltage dips, short 2020 IEC CORR 1 interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase - Edition 3.0 196 61000-4-11 Electromagnetic compatibility (EMC) _ Part 4-11: Testing and measurement techniques _ Voltage dips, short interruptions 2020 IEC and voltage variations immunity tests for equipment with input current up to 16 A per phase - Edition 3.0 197 61000-4-36 Electromagnetic compatibility (EMC) _ Part 4-36: Testing and measurement techniques _ IEMI immunity test methods for 2020 IEC equipment and systems - Edition 2.0 198 61000-6-3 Electromagnetic compatibility (EMC)_ Part 6-3: Generic standards _ Emission standard for equipment in residential 2020 IEC environments - Edition 3.0 199 61000-6-8 Electromagnetic compatibility (EMC) _ Part 6-8: Generic standards _ Emission standard for professional equipment in 2020 IEC commercial and light-industrial locations - Edition 1.0 200 61007 Transformers and inductors for use in electronic and telecommunication equipment _ Measuring methods and test 2020 IEC procedures - Edition 3.0 201 61010-2-032 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND 2020 IEC CORR 1 LABORATORY USE _ Part 2-032: Particular requirements for HANDHELD and hand-manipulated current sensors for electrical test and measurement - Edition 4.0 202 61010-2-040 Safety requirements for electrical equipment for measurement, control, and laboratory use _ Part 2-040: Particular 2020 IEC requirements for sterilizers and washer-disinfectors used to treat medical materials - Edition 3.0 203 61010-2-202 Safety requirements for electrical equipment for measurement, control and laboratory use _ Part 2-202: Particular 2020 IEC requirements for electrically operated valve actuators - Edition 2.0 204 61031 Nuclear facilities _ Instrumentation and control systems _ Design, location and application criteria for installed area gamma 2020 IEC radiation dose rate monitoring equipment for use during normal operation and anticipated operational occurrences - Edition 2.0 205 61076-2-012 Connectors for electrical and electronic equipment _ Product requirements _ Part 2?012: Circular connectors _ Detail 2020 IEC specification for connectors with inner push?pull locking based on M12 connector interfaces according to IEC 61076?2?101, IEC 61076?2?109, 206 61076-2-114 Connectors for electrical and electronic equipment _ Product requirements _ Part 2-114: Circular connectors _ Detail 2020 IEC specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz - Edition 1 207 61076-3-124 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT _ PRODUCT REQUIREMENTS Part 3-124: 2020 IEC CORR 1 Rectangular connectors _ Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz - Edition 1.0 208 61076-8-100 Connectors for electrical and electronic equipment _ Product requirements _ Part 8-100: Power connectors _ Detail 2020 IEC specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A - E 209 61076-8-101 Connectors for electrical and electronic equipment _ Product requirements _ Part 8-101: Power connectors _ Detail 2020 IEC specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A - E 210 61076-8-102 Connectors for electrical and electronic equipment _ Product requirements _ Part 8-102: Power connectors _ Detail 2020 IEC specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A - 211 61083-3 Instruments and software used for measurement in high-voltage and high?current tests _ Part 3: Requirements for hardware 2020 IEC for tests with alternating and direct voltages and currents - Edition 1.0 212 61108-5 Maritime navigation and radiocommunication equipment and systems _ Global navigation satellite systems (GNSS) _ Part 2020 IEC 5: BeiDou navigation satellite system (BDS) _ Receiver equipment _ Performance requirements, methods of testing and required test results 213 61156-5 Multicore and symmetrical pair/quad cables for digital communications _ Part 5: Symmetrical pair/quad cables with 2020 IEC transmission characteristics up to 1 000 MHz _ Horizontal floor wiring _ Sectional specification - Edition 3.0 214 61156-6 Multicore and symmetrical pair/quad cables for digital communications _ Part 6: Symmetrical pair/quad cables with 2020 IEC transmission characteristics up to 1 000 MHz _ Work area wiring _ Sectional specification - Edition 4.0 215 61162-460 Maritime navigation and radiocommunication equipmentand systems _ Digital interfaces _ Part 460: Multiple talkers and 2020 IEC multiple listeners _ Ethernet interconnection _ Safety and security - Edition 2.1; Consolidated Reprint 216 61163-2 Reliability stress screening _ Part 2: Components - Edition 2.0 2020 IEC 217 61169-1-4 Radio-frequency connectors _ Part 1-4: Electrical test methods _ Voltage standing wave ratio, return loss and reflection 2020 IEC coefficient - Edition 1.0 218 61169-61 Radio-frequency connectors _ Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of 2020 IEC outer conductor, quick lock coupling, series Q4.1-9.5 - Edition 1.0 219 61169-63 Radio-frequency connectors _ Part 63: Sectional specification _ RF coaxial connectors with inner diameter of outer 2020 IEC conductor 6,5 mm (0,256 in) with bayonet lock _ Characteristic impedance 75 ? (type BNC75) - Edition 1.0 220 61189-5-504 Test methods for electrical materials, printed board and other interconnection structures and assemblies _ Part 5-504: 2020 IEC General test methods for materials and assemblies _ Process ionic contamination testing (PICT) - Edition 1.0 221 61196-1-119 Coaxial communication cables _ Part 1-119: Electrical test methods _ RF average power rating - Edition 2.0 2020 IEC 222 61196-6-2 Coaxial communication cables _ Part 6-2: Detail specification for 75-4 type CATV drop cables - Edition 2.0 2020 IEC 223 61196-6-3 Coaxial communication cables _ Part 6-3: Detail specification for 75-5 type CATV drop cables - Edition 2.0 2020 IEC 224 61196-6-4 Coaxial communication cables _ Part 6-4: Detail specification for 75-7 type CATV drop cables - Edition 2.0 2020 IEC 225 61196-6-5 Coaxial communication cables _ Part 6-5: Detail specification for Type A quad-shield CATV drop cables with screening 2020 IEC class A++ - Edition 1.0 226 61223-3-6 Evaluation and routine testing in medical imaging departments _ Part 3-6: Acceptance and constancy tests _ Imaging 2020 IEC performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation - Edition 1.0 227 61226 Nuclear power plants _ Instrumentation, control and electrical power systems important to safety _ Categorization of 2020 IEC functions and classification of systems - Edition 4.0 228 61228 Fluorescent ultraviolet lamps used for tanning _ Measurement and specification method - Edition 3.0 2020 IEC 229 61280-4-1 Fibre-optic communication subsystem test procedures _ Part 4-1: Installed cabling plant _ Multimode attenuation 2020 IEC CORR 1 measurement - Edition 3.0 230 61280-4-5 Fibre-optic communication subsystem test procedures _ Part 4-5: Installed cabling plant _ Attenuation measurement of 2020 IEC MPO terminated fibre optic cabling plant using test equipment with MPO interfaces - Edition 1.0 231 61290-1-1 Optical amplifiers _ Test methods _ Part 1-1: Power and gain parameters _ Optical spectrum analyzer method - Edition 4.0 2020 IEC 232 61300-2-4 Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures _ Part 2-4: Tests _ 2020 IEC Fibre or cable retention - Edition 2.1; Consolidated Reprint 233 61300-2-19 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS _ BASIC TESTS AND 2020 IEC CORR 1 MEASUREMENT PROCEDURES Part 2-19: Tests - Damp heat (steady state) - Edition 3.0 234 61300-2-56 Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures _ Part 2-56: Tests _ 2020 IEC Wind resistance of mounted housing - Edition 1.0 235 61300-3-30 Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures _ Part 3-30: 2020 IEC Examinations and measurements _ Endface geometry of rectangular ferrule - Edition 2.0 236 61300-3-53 Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures Part 3-53: 2020 IEC Examinations and measurements _ Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide 237 61300-3-55 Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures _ Part 3-55: 2020 IEC Examinations and measurements _ Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components - Ed 238 61322 Radiation protection instrumentation _ Installed ambient dose equivalent rate meters, warning and monitoring assemblies 2020 IEC for neutrons with energies from thermal to 20 MeV - Edition 2.0 239 61326-1 NULL 2020 IEC 240 61326-2-1 Electrical equipment for measurement, control and laboratory use _ EMC requirements _ Part 2-1: Particular requirements 2020 IEC _ Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected 241 61326-2-2 Electrical equipment for measurement, control and laboratory use _ EMC requirements _ Part 2-2: Particular requirements 2020 IEC _ Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in 242 61326-2-3 NULL 2020 IEC 243 61326-2-4 Electrical equipment for measurement, control and laboratory use _ EMC requirements _ Part 2-4: Particular requirements 2020 IEC _ Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and f 244 61326-2-5 Electrical equipment for measurement, control and laboratory use _ EMC requirements _ Part 2-5: Particular requirements 2020 IEC _ Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 617 245 61326-2-6 Electrical equipment for measurement, control and laboratory use _ EMC requirements _ Part 2-6: Particular requirements 2020 IEC _ In vitro diagnostic (IVD) medical equipment - Edition 3.0 246 61400-5 Wind energy generation systems _ Part 5: Wind turbine blades - Edition 1.0 2020 IEC 247 61400-6 Wind energy generation systems _ Part 6: Tower and foundation design requirements - Edition 1.0 2020 IEC 248 61400-12-1 WIND ENERGY GENERATION SYSTEMS _ Part 12-1: Power performance measurements of electricity producing wind 2020 IEC CORR 2 turbines - Edition 2.0 249 61400-27-1 Wind energy generation systems _ Part 27-1: Electrical simulation models _ Generic models - Edition 2.0 2020 IEC 250 61400-27-2 Wind energy generation systems _ Part 27-2: Electrical simulation models _ Model validation - Edition 1.0 2020 IEC 251 61439-1 Low-voltage switchgear and controlgear assemblies _ Part 1: General rules - Edition 3.0 2020 IEC 252 61439-2 Low-voltage switchgear and controlgear assemblies _ Part 2: Power switchgear and controlgear assemblies - Edition 3.0 2020 IEC 253 61496-1 Safety of machinery _ Electro-sensitive protective equipment _ Part 1: General requirements and tests - Edition 4.0 2020 IEC 254 61496-2 Safety of machinery _ Electro-sensitive protective equipment _ Part 2: Particular requirements for equipment using active 2020 IEC opto-electronic protective devices (AOPDs) - Edition 4.0 255 61534-1 Powertrack systems _ Part 1: General requirements - Edition 2.2; Consolidated Reprint 2020 IEC 256 61547 Equipment for general lighting purposes _ EMC immunity requirements - Edition 3.0 2020 IEC 257 61557-11 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC _ Equipment for testing, measuring 2020 IEC or monitoring of protective measures _ Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems - Edition 2. 258 61631 Test method for the mechanical strength of cores made of magnetic oxides - Edition 2.0 2020 IEC 259 61643-12 Low-voltage surge protective devices _ Part 12: Surge protective devices connected to low-voltage power systems _ 2020 IEC Selection and application principles - Edition 3.0 260 61643-331 Components for low-voltage surge protection _ Part 331: Performance requirements and test methods for metal oxide 2020 IEC varistors (MOV) - Edition 3.0 261 61643-341 Components for low-voltage surge protection _ Part 341: Performance requirements and test circuits for thyristor surge 2020 IEC suppressors (TSS) - Edition 2.0 262 61701 Photovoltaic (PV) modules _ Salt mist corrosion testing - Edition 3.0 2020 IEC 263 61753-1 Fibre optic interconnecting devices and passive components _ Performance standard _ Part 1: General and guidance - 2020 IEC Edition 2.1; CONSOLIDATED VERSION 264 61753-061-2 Fibre optic interconnecting devices and passive components _ Performance standard _ Part 061-2: Single-mode fibre optic 2020 IEC pigtailed style polarization independent isolators for category C _ Controlled environments - Edition 2.0 265 61753-071-02 Fibre optic interconnecting devices and passive components _ Performance standard _ Part 071-02: Non-connectorized 2020 IEC single-mode fibre optic 1 _ 2 and 2 _ 2 spatial switches for category C _ Controlled environments - Edition 1.0 266 61754-35 Fibre optic interconnecting devices and passive components _ Fibre optic connector interfaces _ Part 35: Type LSHE 2020 IEC connector family for harsh environments - Edition 1.0 267 61757-1-1 Fibre optic sensors _ Part 1-1: Strain measurement _ Strain sensors based on fibre Bragg gratings - Edition 2.0 2020 IEC 268 61757-4-3 Fibre optic sensors _ Part 4-3: Electric current measurement _ Polarimetric method - Edition 1.0 2020 IEC 269 61760-1 Surface mounting technology _ Part 1: Standard method for the specification of surface mounting components (SMDs) - 2020 IEC Edition 3.0 270 61788-4 Superconductivity _ Part 4: Residual resistance ratio measurement _ Residual resistance ratio of Nb?Ti and Nb3Sn 2020 IEC composite superconductors - Edition 5.0 271 61788-7 Superconductivity _ Part 7: Electronic characteristic measurements _ Surface resistance of high?temperature 2020 IEC superconductors at microwave frequencies - Edition 3.0 272 61788-26 Superconductivity _ Part 26: Critical current measurement _ DC critical current of RE-Ba-Cu-O composite 2020 IEC superconductors - Edition 1.0 273 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters - 2020 IEC Edition 2.0 274 61804-3 Devices and integration in enterprise systems _ Function blocks (FB) for process control and electronic device description 2020 IEC language (EDDL) _ Part 3: EDDL syntax and semantics - Edition 4.0 275 61804-4 Devices and integration in enterprise systems _ Function blocks (FB) for process control and electronic device description 2020 IEC language (EDDL) _ Part 4: EDD interpretation - Edition 2.0 276 61804-5 Devices and integration in enterprise systems _ Function blocks (FB) for process control and electronic device description 2020 IEC language (EDDL) _ Part 5: EDDL Builtin library - Edition 2.0 277 61810-4 Electromechanical elementary relays _ Part 4: General and safety requirements for reed relays - Edition 1.0 2020 IEC 278 61828 Ultrasonics _ Transducers _ Definitions and measurement methods regarding focsusing for the transmitted fields - Edition 2020 IEC 2.0 279 61837-2 Surface mounted piezoelectric devices for frequency control and selection _ Standard outlines and terminal lead 2020 IEC connections _ Part 2: Ceramic enclosures - Edition 3.1; Consolidated Reprint 280 61850-4 Communication networks and systems for power utility automation _ Part 4: System and project management - Edition 2.1; 2020 IEC Consolidated Reprint 281 61850-7-1 Communication networks and systems for power utility automation _ Part 7-1: Basic communication structure _ Principles 2020 IEC and models - Edition 2.1; Consolidated Reprint 282 61850-7-2 Communication networks and systems for power utility automation _ Part 7-2: Basic information and communication 2020 IEC structure _ Abstract communication service interface (ACSI) - Edition 2.1; consolidated reprint 283 61850-7-3 Communication networks and systems for power utility automation _ Part 7-3: Basic communication structure _ Common 2020 IEC data classes - Edition 2.1; Consolidated Reprint 284 61850-7-4 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible 2020 IEC logical node classes and data object classes - Edition 2.1; Consolidated Reprint 285 61850-8-1 Communication networks and systems for power utility automation _ Part 8-1: Specific communication service mapping 2020 IEC (SCSM) _ Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 - Edition 2.1; Consolidated Reprint 286 61850-9-2 Communication networks and systems for power utility automation _ Part 9-2: Specific communication service mapping 2020 IEC (SCSM) _ Sampled values over ISO/IEC 8802-3 - Edition 2.1; Consolidated Reprint 287 61851-25 Electric vehicle conductive charging system _ Part 25: DC EV supply equipment where protection relies on electrical 2020 IEC separation - Edition 1.0 288 61854 Overhead lines _ Requirements and tests for spacers - Edition 2.0 2020 IEC 289 61897 Overhead lines _ Requirements and tests for aeolian vibration dampers - Edition 2.0 2020 IEC 290 61937-3 Digital audio _ Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 _ Part 3: Non-linear PCM 2020 IEC bitstreams according to the AC-3 and enhanced AC-3 formats - Edition 3.1; Consolidated Reprint 291 61960-4 Secondary cells and batteries containing alkaline or other non-acid electrolytes _ Secondary lithium cells and batteries for 2020 IEC portable applications _ Part 4: Coin secondary lithium cells, and batteries made from them - Edition 1.0 292 61966-12-1 Multimedia systems and equipment _ Colour measurement and management _ Part 12-1: Metadata for identification of 2020 IEC colour gamut (Gamut ID) - Edition 2.0 293 61968-1 Application integration at electric utilities _ System interfaces for distribution management _ Part 1: Interface architecture 2020 IEC and general recommendations - Edition 3.0 294 61968-5 Application integration at electric utilities _ System interfaces for distribution management _ Part 5: Distributed energy 2020 IEC optimization - Edition 1.0 295 61969-1 Mechanical structures for electrical and electronic equipment _ Outdoor enclosures _ Part 1: Design guidelines - Edition 2020 IEC 3.0 296 61969-3 Mechanical structures for electrical and electronic equipment _ Outdoor enclosures _ Part 3: Environmental requirements, 2020 IEC tests and safety aspects - Edition 3.0 297 61970-301 Energy management system application program interface (EMS-API) _ Part 301: Common information model (CIM) base 2020 IEC - Edition 7.0 298 61977 Fibre optic interconnecting devices and passive components _ Fibre optic fixed filters _ Generic specification - Edition 4.0 2020 IEC 299 61980-1 Electric vehicle wireless power transfer (WPT) systems _ Part 1: General requirements - Edition 2.0 2020 IEC 300 61992-6 Railway applications _ Fixed installations _ DC switchgear _ Part 6: DC switchgear assemblies - Edition 1.2; Consolidated 2020 IEC Reprint 301 62003 Nuclear power plants _ Instrumention, control and electrical power systems _ Requirements for electromagnetic 2020 IEC compatibility testing - Edition 2.0 302 62020-1 CORR ELECTRICAL ACCESSORIES _ RESIDUAL CURRENT MONITORS (RCMs) _ Part 1: RCMs for household and 2020 IEC 1 similar uses - Edition 1.0 303 62020-1 Electrical accessories _ Residual current monitors (RCMs) _ Part 1: RCMs for household and similar uses - Edition 1.0 2020 IEC 304 62024-2 High frequency inductive components _ Electrical characteristics and measuring methods _ Part 2: Rated current of 2020 IEC inductors for DC-to-DC converters - Edition 2.0 305 62047-37 Semiconductor devices _ Micro-electromechanical devices _ Part 37: Environmental test methods of MEMS piezoelectric 2020 IEC thin films for sensor application - Edition 1.0 306 62052-11 Electricity metering equipment _ General requirements, tests and test conditions _ Part 11: Metering equipment - Edition 2020 IEC 2.0 307 62053-21 Electricity metering equipment _ Particular requirements _ Part 21: Static meters for AC active energy (classes 0,5, 1 and 2020 IEC 2) - Edition 2.0 308 62053-22 Electricity metering equipment _ Particular requirements _ Part 22: Static meters for AC active energy (classes 0,1S, 0,2S 2020 IEC and 0,5S) - Edition 2.0 309 62053-23 Electricity metering equipment _ Particular requirements _ Part 23: Static meters for reactive energy (classes 2 and 3) - 2020 IEC Edition 2.0 310 62053-24 Electricity metering equipment _ Particular requirements _ Part 24: Static meters for fundamental component reactive 2020 IEC energy (classes 0,5S, 1S, 1, 2 and 3) - Edition 2.0 311 62056-8-8 Electricity metering data exchange _ The DLMS/COSEM suite _ Part 8-8: Communication profile for ISO/IEC 14908 2020 IEC series networks - Edition 1.0 312 62109-3 Safety of power converters for use in photovoltaic power systems _ Part 3: Particular requirements for electronic devices in 2020 IEC combination with photovoltaic elements - Edition 1.0 313 62135-2 Resistance welding equipment _ Part 2: Electromagnetic compatibility (EMC) requirements - Edition 3.0 2020 IEC 314 62148-6 Fibre optic active components and devices _ Package and interface standards _ Part 6: ATM-PON transceivers - Edition 2.0 2020 IEC 315 62149-3 Fibre optic active components and devices _ Performance standards _ Part 3: Modulator-integrated laser diode transmitters 2020 IEC for 40-Gbit/s fibre optic transmission systems - Edition 3.0 316 62149-5 Fibre optic active components and devices _ Performance standards _ Part 5: ATM-PON transceivers with LD driver and 2020 IEC CDR ICs - Edition 3.0 317 62149-11 Fibre optic active components and devices _ Performance standards _ Part 11: Multiple channel transmitter/receiver chip 2020 IEC scale package with multimode fibre interface - Edition 1.0 318 62153-4-9 Metallic communication cable test methods _ Part 4-9: Electromagnetic compatibility (EMC) _ Coupling attenuation of 2020 IEC screened balanced cables, triaxial method - Edition 2.1; Consolidated Reprint 319 62153-4-10 Metallic communication cable test methods _ Part 4-10: Electromagnetic compatibility (EMC) _ Transfer impedance and 2020 IEC screening attenuation of feed-throughs and electromagnetic gaskets _ Double coaxial test method - Edition 2.1; CONSOLIDATED VERSION 320 62264-6 Enterprise-control system integration _ Part 6: Messaging service model - Edition 1.0 2020 IEC 321 62271-104 High-voltage switchgear and controlgear _ Part 104: Alternating current switches for rated voltages higher than 52 kV - 2020 IEC Edition 3.0 322 62271-108 High-voltage switchgear and controlgear _ Part 108: High-voltage alternating current disconnecting circuit-breakers for 2020 IEC rated voltages above 52 kV - Edition 2.0 323 62282-2-100 Fuel cell technologies _ Part 2-100: Fuel cell modules _ Safety - Edition 1.0 2020 IEC 324 62282-8-101 Fuel cell technologies _ Part 8-101: Energy storage systems using fuel cell modules in reverse mode _ Test procedures for 2020 IEC the performance of solid oxide single cells and stacks, including reversible operation - Edition 1.0 325 62282-8-201 Fuel cell technologies _ Part 8-201: Energy storage systems using fuel cell modules in reverse mode _ Test procedures for 2020 IEC the performance of power-to-power systems - Edition 1.0 326 62290-3 CORR RAILWAY APPLICATIONS _ URBAN GUIDED TRANSPORT MANAGEMENT AND COMMAND/CONTROL 2020 IEC 1 SYSTEMS _ Part 3: System requirements specification - Edition 1.0 327 62321-3-2 Determination of certain substances in electrotechnical products _ Part 3-2: Screening _ Fluorine, chlorine and bromine in 2020 IEC polymers and electronics by combustion-ion chromatography (C-IC) - Edition 2.0 328 62321-10 Determination of certain substances in electrotechnical products _ Part 10: Polycyclic aromatic hydrocarbons (PAHs) in 2020 IEC polymers and electronics by gas chromatography-mass spectrometry (GC-MS) - Edition 1.0 329 62325-451-10 Framework for energy market communications _ Part 451-10: Profiles for Energy Consumption Data ("My Energy Data") - 2020 IEC Edition 1.0 330 62343-3-3 Dynamic modules _ Part 3-3: Performance specification templates _ Wavelength selective switches - Edition 2.0 2020 IEC 331 62351-3 Power systems management and associated information exchange _ Data and communications security _ Part 3: 2020 IEC Communication network and system security _ Profiles including TCP/IP - Edition 1.2; Consolidated Reprint 332 62351-4 Power systems management and associated information exchange _ Data and communications security _ Part 4: Profiles 2020 IEC including MMS and derivatives - Edition 1.1; CONSOLIDATED VERSION 333 62351-6 Power systems management and associated information exchange _ Data and communication security _ Part 6: Security for 2020 IEC IEC 61850 - Edition 1.0 334 62351-8 Power systems management and associated information exchange _ Data and communications security _ Part 8: Role-based 2020 IEC access control for power system management - Edition 1.0 335 62366-1 Medical devices _ Part 1: Application of usability engineering to medical devices - Edition 1.1; Consolidated Reprint 2020 IEC 336 62368-1 CORR Audio/video, information and communication technology equipment _ Part 1: Safety requirements - Edition 3.0 2020 IEC 1 337 62373-1 Semiconductor devices _ Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) 2020 IEC _ Part 1: Fast BTI test for MOSFET - Edition 1.0 338 62384 DC or AC supplied electronic controlgear for LED modules _ Performance requirements - Edition 2.0 2020 IEC 339 62386-105 Digital addressable lighting interface _ Part 105: Particular requirements for control gear and control devices _ Firmware 2020 IEC transfer - Edition 1.0 340 62387 Radiation protection instrumentation _ Dosimetry systems with integrating passive detectors for individual, workplace and 2020 IEC environmental monitoring of photon and beta radiation - Edition 2.0 341 62433-1 CORR EMC IC MODELLING _ Part 1: General modelling framework CORRIGENDUM 1 - Edition 1.0 2020 IEC 1 342 62433-6 EMC IC modelling _ Part 6: Models of integrated circuits for pulse immunity behavioural simulation _ Conducted pulse 2020 IEC immunity modelling (ICIM-CPI) - Edition 1.0 343 62435-3 Electronic components _ Long-term storage of electronic semiconductor devices _ Part 3: Data - Edition 1.0 2020 IEC 344 62435-7 Electronic components _ Long-term storage of electronic semiconductor devices _ Part 7: Micro-electromechanical devices 2020 IEC - Edition 1.0 345 62435-8 Electronic components _ Long-term storage of electronic semiconductor devices _ Part 8: Passive electronic devices - 2020 IEC Edition 1.0 346 62443-3-2 Security for industrial automation and control systems _ Part 3-2: Security risk assessment for system design - Edition 1.0 2020 IEC 347 62446-2 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 2: Grid connected systems - 2020 IEC Maintenance of PV systems - Edition 1.0 348 62474 Material declaration for products of and for the electrotechnical industry - Edition 2.1; Consolidated Reprint 2020 IEC 349 62484 Radiation protection instrumentation _ Spectrometric radiation portal monitors (SRPMs) used for the detection and 2020 IEC identification of illicit trafficking of radioactive material - Edition 2.0 350 62485-5 Safety requirements for secondary batteries and battery installations _ Part 5: Safe operation of stationary lithium ion 2020 IEC batteries - Edition 1.0 351 62488-2 CORR POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS _ Part 2: Analogue power line 2020 IEC 1 carrier terminals or APLC - Edition 1.0 352 62496-4-214 Optical circuit boards _ Part 4-214: Interface standards _ Terminated waveguide OCB assembly using a single-row thirty- 2020 IEC two-channel symmetric PMT connector - Edition 1.0 353 62505-3-1 Railway applications _ Fixed installations _ Particular requirements for AC switchgear _ Part 3-1: Measurement, control 2020 IEC and protection devices for specific use in AC traction systems _ Devices - Edition 2.0 354 62505-3-2 Railway applications _ Fixed installations _ Particular requirements for AC switchgear _ Part 3-2: Measurement, control 2020 IEC and protection devices for specific use in AC traction systems _ Current transformers - Edition 2.0 355 62505-3-3 Railway applications _ Fixed installations _ Particular requirements for AC switchgear _ Part 3-3: Measurement, control 2020 IEC and protection devices for specific use in AC traction systems _ Voltage transformers - Edition 2.0 356 62541-3 NULL 2020 IEC 357 62541-4 OPC unified architecture _ Part 4: Services - Edition 3.0 2020 IEC 358 62541-5 OPC unified architecture _ Part 5: Information Model - Edition 3.0 2020 IEC 359 62541-6 OPC unified architecture _ Part 6: Mappings - Edition 3.0 2020 IEC 360 62541-7 OPC unified architecture _ Part 7: Profiles - Edition 3.0 2020 IEC 361 62541-8 OPC unified architecture _ Part 8: Data access - Edition 3.0 2020 IEC 362 62541-9 OPC unified architecture _ Part 9: Alarms and Conditions - Edition 3.0 2020 IEC 363 62541-10 OPC unified architecture _ Part 10: Programs - Edition 3.0 2020 IEC 364 62541-11 OPC unified architecture _ Part 11: Historical Access - Edition 2.0 2020 IEC 365 62541-12 OPC unified architecture _ Part 12: Discovery and global services - Edition 1.0 2020 IEC 366 62541-13 OPC Unified Architecture _ Part 13: Aggregates - Edition 2.0 2020 IEC 367 62541-14 OPC unified architecture _ Part 14: PubSub - Edition 1.0 2020 IEC 368 62552-2 Household refrigerating appliances _ Characteristics and test methods _ Part 2: Performance requirements - Edition 1.1; 2020 IEC Consolidated Reprint 369 62552-3 Household refrigerating appliances _ Characteristics and test methods _ Part 3: Energy consumption and volume - Edition 2020 IEC 1.1; Consolidated Reprint 370 62566-2 Nuclear power plants _ Instrumentation and control important to safety _ Development of HDL-programmed integrated 2020 IEC circuits _ Part 2: HDL-programmed integrated circuits for systems performing category B or C functions - Edition 1.0 371 62574 Audio, video and multimedia systems _ General channel assignment of multichannel audio - Edition 2.0 2020 IEC 372 62595-2-4 Display lighting unit _ Part 2-4: Electro-optical measuring methods of laser module - Edition 1.0 2020 IEC 373 62610-6 Mechanical structures for electrical and electronic equipment _ Thermal management for cabinets in accordance with IEC 2020 IEC 60297 and IEC 60917 series _ Part 6: Air recirculation and bypass of indoor cabinets - Edition 1.0 374 62614-1 Fibre optics _ Multimode launch conditions _ Part 1: Launch condition requirements for measuring multimode attenuation - 2020 IEC Edition 1.0 375 62656-8 Standardized product ontology register and transfer by data parcels _ Part 8: Web service interface for data parcels - Edition 2020 IEC 1.0 376 62714-4 Engineering data exchange format for use in industrial automation systems engineering _ Automation markup language _ 2020 IEC Part 4: Logic - Edition 1.0 377 62715-6-3 Flexible display devices _ Part 6-3: Mechanical test methods _ Impact and hardness tests - Edition 1.0 2020 IEC 378 62755 Radiation protection instrumentation _ Data format for radiation instruments used in the detection of illicit trafficking of 2020 IEC radioactive materials - Edition 1.1; Consolidated Reprint 379 62769-100 Field device integration (FDI) _ Part 100: Profiles _ Generic protocols - Edition 1.0 2020 IEC 380 62769-101-1 Field device integration (FDI) _ Part 101-1: Profiles _ Foundation Fieldbus H1 - Edition 2.0 2020 IEC 381 62769-101-2 Field device integration (FDI) _ Part 101-2: Profiles _ Foundation Fieldbus HSE - Edition 2.0 2020 IEC 382 62769-103-1 Field device integration (FDI) _ Part 103-1: Profiles _ PROFIBUS - Edition 2.0 2020 IEC 383 62769-103-4 Field device integration (FDI) _ Part 103-4: Profiles _ PROFINET - Edition 2.0 2020 IEC 384 62769-109-1 Field device integration (FDI) _ Part 109-1: Profiles _ HART_ and WirelessHART_ - Edition 2.0 2020 IEC 385 62769-115-2 Field device integration (FDI) _ Part 115-2: Profiles _ Modbus-RTU - Edition 1.0 2020 IEC 386 62779-4 Semiconductor devices _ Semiconductor interface for human body communication _ Part 4: Capsule endoscope - Edition 2020 IEC 1.0 387 62788-1-4 Measurement procedures for materials used in photovoltaic modules _ Part 1-4: Encapsulants _ Measurement of optical 2020 IEC transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength - Edition 1.1; CONSOL 388 62788-1-6 Measurement procedures for materials used in photovoltaic modules _ Part 1-6: Encapsulants _ Test methods for 2020 IEC determining the degree of cure in Ethylene-Vinyl Acetate - Edition 1.1; consolidated reprint 389 62788-1-7 Measurement procedures for materials used in photovoltaic modules _ Part 1-7: Encapsulants _ Test procedure of optical 2020 IEC durability - Edition 1.0 390 62788-5-1 Measurement procedures for materials used in photovoltaic modules _ Part 5-1: Edge seals _ Suggested test methods for 2020 IEC use with edge seal materials - Edition 1.0 391 62788-6-2 Measurement procedures for materials used in photovoltaic modules _ Part 6-2: General tests _ Moisture permeation testing 2020 IEC of polymeric materials - Edition 1.0 392 62790 Junction boxes for photovoltaic modules _ Safety requirements and tests - Edition 2.0 2020 IEC 393 62793 Thunderstorm warning systems _ Protection against lightning - Edition 2.0 2020 IEC 394 62801 Measurement method of half-wavelength voltage for Mach-Zehnder optical modulator in wireless communication and 2020 IEC broadcasting systems - Edition 1.0 395 62812 CORR 1 Low resistance measurements _ Methods and guidance - Edition 1.0 2020 IEC 396 62828-4 Reference conditions and procedures for testing industrial and process measurement transmitters _ Part 4: Specific 2020 IEC procedures for level transmitters - Edition 1.0 397 62828-5 Reference conditions and procedures for testing industrial and process measurement transmitters _ Part 5: Specific 2020 IEC procedures for flow transmitters - Edition 1.0 398 62832-1 NULL 2020 IEC 399 62832-2 Industrial-process measurement, control and automation _ Digital factory framework _ Part 2: Model elements - Edition 1.0 2020 IEC 400 62832-3 Industrial-process measurement, control and automation _ Digital Factory framework _ Part 3: Application of Digital 2020 IEC Factory for life cycle management of production systems - Edition 1.0 401 62841-2-3 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery _ Safety _ Part 2-3: Particular 2020 IEC requirements for hand-held grinders, disc-type polishers and disc-type sanders - Edition 1.0 402 62841-2-6 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery _ Safety _ Part 2-6: Particular 2020 IEC requirements for hand-held hammers - Edition 1.0 403 62841-3-7 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery _ Safety _ Part 3-7: Particular 2020 IEC requirements for transportable wall saws - Edition 1.0 404 62841-3-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery _ Safety _ Part 3-9: Particular 2020 IEC requirements for transportable mitre saws - Edition 2.0 405 62841-4-3 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery _ Safety _ Part 4-3: Particular 2020 IEC requirements for pedestrian controlled walk-behind lawnmowers - Edition 1.0 406 62841-4-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery _ Safety _ Part 4-4: Particular 2020 IEC requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws - Edition 1.0 407 62852 Connectors for DC-application in photovoltaic systems _ Safety requirements and tests - Edition 1.1; Consolidated Reprint 2020 IEC 408 62868-1 Organic light emitting diode (OLED) light sources for general lighting _ Safety _ Part 1: General requirements and tests - 2020 IEC Edition 1.0 409 62868-2-1 Organic light emitting diode (OLED) light sources for general lighting _ Safety _ Part 2-1: Particular requirements _ Semi- 2020 IEC integrated OLED modules - Edition 1.0 410 62868-2-2 Organic light emitting diode (OLED) light sources for general lighting _ Safety _ Part 2-2: Particular requirements _ 2020 IEC Integrated OLED modules - Edition 1.0 411 62873-1 Residual current operated circuit-breakers for household and similar use _ Part 1: Outline of blocks and modules for 2020 IEC residual current device standards - Edition 1.1; Consolidated Reprint 412 62873-3-1 Residual current operated circuit-breakers for household and similar use _ Part 3-1: Particular requirements for devices 2020 IEC with screwless-type terminals for external copper conductors - Edition 2.0 413 62873-3-2 Residual current operated circuit-breakers for household and similar use _ Part 3-2: Particular requirements for devices 2020 IEC with flat quick-connect terminations - Edition 2.0 414 62885-4 Surface cleaning appliances _ Part 4: Cordless dry vacuum cleaners for household or similar use _ Methods for measuring 2020 IEC the performance - Edition 1.0 415 62890 Industrial-process measurement, control and automation _ Life-cycle-management for systems and components - Edition 2020 IEC 1.0 416 62891 Maximum power point tracking efficiency of grid connected photovoltaic inverters - Edition 1.0 2020 IEC 417 62893-1 Charging cables for electric vehicles for rated voltages up to and including 0,6/1 KV _ Part 1: General requirements - 2020 IEC Edition 1.1; Consolidated Reprint 418 62893-4-1 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV _ Part 4-1: Cables for DC charging 2020 IEC according to mode 4 of IEC 61851?1 _ DC charging without use of a thermal management system - Edition 1.0 419 62899-202-6 Printed electronics _ Part 202-6: Materials _ Conductive ink _ Measurement method for resistance changes under high 2020 IEC temperature and humidity _ Printed conductive layer on a flexible substrate - Edition 1.0 420 62899-402-2 Printed electronics _ Part 402-2: Printability _ Measurement of qualities _ Edge waviness - Edition 1.0 2020 IEC 421 62899-503-1 Printed electronics _ Part 503-1: Quality assessment _ Test method of displacement current measurement for printed thin- 2020 IEC film transistor - Edition 1.0 422 62899-505 Printed electronics _ Part 505: Quality assessment _ Flexible gas sensor _ Mechanical and thermal testing - Edition 1.0 2020 IEC 423 62906-5-6 Laser displays _ Part 5-6: Measuring methods for optical performance of projection screens - Edition 1.0 2020 IEC 424 62932-1 Flow battery energy systems for stationary applications _ Part 1: Terminology and general aspects - Edition 1.0 2020 IEC 425 62932-2-1 Flow battery energy systems for stationary applications _ Part 2-1: Performance general requirements and test methods - 2020 IEC Edition 1.0 426 62932-2-2 Edition 1.0 - Flow battery energy systems for stationary applications _ Part 2-2: Safety requirements 2020 IEC 427 62933-5-2 Electrical energy storage (EES) systems _ Part 5-2: Safety requirements for grid-integrated EES systems _ 2020 IEC Electrochemical-based systems - Edition 1.0 428 62938 Photovoltaic (PV) modules _ Non-uniform snow load testing - Edition 1.0 2020 IEC 429 62946-01 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT _ Part 01: Rectangular connectors _ Detail 2020 IEC CORR 1 specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carrying capacity 430 62946-02 CONNECTORS FOR ELECTRONIC EQUIPMENT _ Part 02: Detail specification for 8-way, unshielded, free and fixed 2020 IEC CORR 1 high density connectors for data transmission with frequencies up to 250 MHz and with current carrying capacity up to 1 A - Edition 1.0 431 62960 Dependability reviews during the life cycle - Edition 1.0 2020 IEC 432 62963 Radiation protection instrumentation _ X-ray computed tomography (CT) inspection systems of bottled/canned liquids - 2020 IEC Edition 1.0 433 62966-2 Mechanical structures for electrical and electronic equipment _ Aisle containment for it cabinets _ Part 2: Details of air 2020 IEC flow, air separation and air cooling requirements - Edition 1.0 434 62973-2 Railway applications _ Rolling stock _ Batteries for auxiliary power supply systems _ Part 2: Nickel Cadmium (NiCd) 2020 IEC batteries - Edition 1.0 435 62977-2-2 Electronic displays _ Part 2-2: Measurements of optical characteristics _ Ambient performance - Edition 1.0 2020 IEC 436 62984-1 High-temperature secondary batteries _ Part 1: General requirements - Edition 1.0 2020 IEC 437 62984-2 High-temperature secondary batteries _ Part 2: Safety requirements and tests - Edition 1.0 2020 IEC 438 62984-3 High-temperature secondary batteries _ Part 3: Sodium-based batteries _ Performance requirements and tests - Edition 1.0 2020 IEC 439 63008 Household and similar electrical appliances _ Accessibility of control elements, doors, lids, drawers and handles - Edition 2020 IEC 1.0 440 63034 Microspeakers - Edition 1.0 2020 IEC 441 63041-3 Piezoelectric sensors _ Part 3: Physical sensors - Edition 1.0 2020 IEC 442 63045 Ultrasonics _ Non-focusing short pressure pulse sources including ballistic pressure pulse sources _ Characteristics of fields 2020 IEC - Edition 1.0 443 63046 Nuclear power plants _ Electrical power system _ General requirements - Edition 1.0 2020 IEC 444 63047 CORR 1 Nuclear instrumentation _ Data format for list mode digital data acquisition used in radiation detection and measurement - 2020 IEC Edition 1.0 445 63048 Mobile remotely controlled systems for nuclear and radiological applications _ General requirements - Edition 1.0 2020 IEC 446 63056 Secondary cells and batteries containing alkaline or other non-acid electrolytes _ Safety requirements for secondary lithium 2020 IEC cells and batteries for use in electrical energy storage systems - Edition 1.0 447 63057 Secondary cells and batteries containing alkaline or other non-acid electrolytes _ Safety requirements for secondary lithium 2020 IEC batteries for use in road vehicles not for the propulsion - Edition 1.0 448 63067 Electrical installations for lighting and beaconing of aerodromes _ Connecting devices _ General requirements and tests - 2020 IEC Edition 1.0 449 63068-3 Semiconductor devices _ Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power 2020 IEC devices _ Part 3: Test method for defects using photoluminescence - Edition 1.0 450 63073-1 NULL 2020 IEC 451 63086-1 Household and similar electrical air cleaning appliances _ Methods for measuring the performance Part 1: General 2020 IEC requirements - Edition 1.0 452 63092-1 Photovoltaics in buildings _ Part 1: Requirements for building-integrated photovoltaic modules - Edition 1.0 2020 IEC 453 63092-2 Photovoltaics in buildings _ Part 2: Requirements for building-integrated photovoltaic systems - Edition 1.0 2020 IEC 454 63093-1 Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities _ Part 1: General specification - Edition 1.0 2020 IEC 455 63093-2 Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities _ Part 2: Pot-cores for use in 2020 IEC telecommunications, power supply, and filter applications - Edition 1.0 456 63093-3 Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities _ Part 3: Half pot-cores made of ferrite for 2020 IEC inductive proximity switches - Edition 1.0 457 63093-9 Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities _ Part 9: Planar-cores - Edition 1.0 2020 IEC 458 63096 Nuclear power plants _ Instrumentation, control and electrical power systems _ Security controls - Edition 1.0 2020 IEC 459 63103 Lighting equipment _ Non-active mode power measurement - Edition 1.0 2020 IEC 460 63115-1 Secondary cells and batteries containing alkaline or other non-acid electrolytes _ Sealed nickel-metal hydride cells and 2020 IEC batteries for use in industrial applications _ Part 1: Performance - Edition 1.0 461 63121 Radiation protection instrumentation _ Vehicle-mounted mobile systems for the detection of illicit trafficking of radioactive 2020 IEC materials - Edition 1.0 462 63129 Determination of inrush current characteristics of lighting products - Edition 1.0 2020 IEC 463 63132-1 Guidance for installation procedures and tolerances of hydroelectric machines _ Part 1: General aspects - Edition 1.0 2020 IEC 464 63132-2 Guidance for installation procedures and tolerances of hydroelectric machines _ Part 2: Vertical generators - Edition 1.0 2020 IEC 465 63132-3 Guidance for installation procedures and tolerances of hydroelectric machines _ Part 3: Vertical Francis turbines or pump- 2020 IEC turbines - Edition 1.0 466 63132-4 Guidance for installation procedures and tolerances of hydroelectric machines _ Part 4: Vertical Kaplan or propeller 2020 IEC turbines - Edition 1.0 467 63137-1 CORR STANDARD TEST RADIO-FREQUENCY CONNECTORS _ Part 1: Generic specification - General requirements and 2020 IEC 1 test methods - Edition 1.0 468 63138-2 Multi-channel radio-frequency connectors _ Part 2: Sectional specification for MQ4 series circular connectors - Edition 1.0 2020 IEC 469 63145-22-10 Eyewear display _ Part 22-10: Specific measurement methods for AR type _ Optical properties - Edition 1.0 2020 IEC 470 63152 Smart cities _ City service continuity against disasters _ The role of the electrical supply - Edition 1.0 2020 IEC 471 63155 Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave 2020 IEC (BAW) devices in radio frequency (RF) applications - Edition 1.0 472 63169 Electrical household and similar cooling and freezing appliances _ Food preservation - Edition 1.0 2020 IEC 473 63171-1 Connectors for electrical and electronic equipment _ Part 1: Detail specification for two-way, shielded or unshielded, free 2020 IEC and fixed connectors _ Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style - Editi 474 63171-6 Connectors for electrical and electronic equipment _ Part 6: Detail specification for 2-way and 4-way (data/power), 2020 IEC shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz - Edition 1.0 475 63172 Electrical accessories _ Methodology for determining the energy efficiency class of electrical accessories - Edition 1.0 2020 IEC 476 63180 Methods of measurement and declaration of the detection range of detectors _ Passive infrared detectors for major and 2020 IEC minor motion detection - Edition 1.0 477 63181-2 LCD multi-screen display terminals _ Part 2: Measuring methods - Edition 1.0 2020 IEC 478 63182-1 Magnetic powder cores _ Guidelines on dimensions and the limits of surface irregularities _ Part 1: General specification - 2020 IEC Edition 1.0 479 63182-2 Magnetic powder cores _ Guidelines on dimensions and the limits of surface irregularities _ Part 2: Ring-cores - Edition 1.0 2020 IEC 480 63185 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method - 2020 IEC Edition 1.0 481 63193 Lead-acid batteries for propulsion power of lightweight vehicles _ General requirements and methods of test - Edition 1.0 2020 IEC 482 63211-3-5 Durability test methods for electronic displays _ Part 3-5: Mechanical tests _ Surface durability - Edition 1.0 2020 IEC 483 63240-1 Active assisted living (AAL) reference architecture and architecture model _ Part 1: Reference architecture IEC - Edition 2020 IEC 1.0 484 63240-2 Active assisted living (AAL) reference architecture and architecture model _ Part 2: Architecture model - Edition 1.0 2020 IEC 485 63252 Energy consumption of vending machines - Edition 1.0 2020 IEC 486 63260 Guide for incorporating human reliability analysis into probabilistic risk assessments for nuclear power generating stations 2020 IEC and other nuclear facilities - Edition 1.0 487 ACEE 03 IEC Advisory Committee on energy efficiency (ACEE) Case study: low-voltage electrical installations - Edition 1.0 2020 IEC 488 ASTM 62885-7 NULL 2020 IEC 489 CA 01 NULL 2020 IEC 490 CISPR 14-1 Electromagnetic compatibility _ Requirements for household appliances, electric tools and similar apparatus _ Part 1: 2020 IEC Emission - Edition 7.0 491 CISPR 14-2 Electromagnetic compatibility _ Requirements for household appliances, Electric tools and similar apparatus _ Part 2: 2020 IEC Immunity _ Product family standard - Edition 3.0 492 CISPR 16-1-3 Specification for radio disturbance and immunity measuring apparatus and methods _ Part 1-3: Radio disturbance and 2020 IEC immunity measuring apparatus _ Ancillary equipment _ Disturbance power - Edition 2.2; Consolidated Reprint 493 CISPR 16-1-4 Specification for radio disturbance and immunity measuring apparatus and methods _ Part 1-4: Radio disturbance and 2020 IEC immunity measuring apparatus _ Antennas and test sites for radiated disturbance measurements - Edition 4.1; Consolidated Reprint 494 CISPR 16-1-5 Specification for radio disturbance and immunity measuring apparatus and methods _ Part 1-5: Radio disturbance and 2020 IEC CORR 1 immunity measuring apparatus _ Antenna calibration sites and reference test sites for 5 MHz to 18 GHz - Edition 2.0 495 CISPR 16-2-1 Specification for radio disturbance and immunity measuring apparatus and methods _ Part 2-1: Methods of measurement of 2020 IEC CORR 1 disturbances and immunity _ Conducted disturbance measurements - Edition 3.0 496 CISPR 36 Electric and hybrid electric road vehicles _ Radio disturbance characteristics _ Limits and methods of measurement for the 2020 IEC protection of off-board receivers below 30 MHz - Edition 1.0 497 CISPR TR 16-3 Specification for radio disturbance and immunity measuring apparatus and methods _ Part 3: CISPR technical reports - 2020 IEC Edition 4.0 498 CISPR TR 16- Specification for radio disturbance and immunity measuring apparatus and methods _ Part 4-4: Uncertainties, statistics and 2020 IEC 4-4 limit modelling _ Statistics of complaints and a model for the calculation of limits for the protection of radio services - Edition 499 CISPR TR 29 Television broadcast receivers and associated equipment _ Immunity characteristics _ Methods of objective picture 2020 IEC assessment - Edition 2.0 500 IEEE 60980- NULL 2020 IEC 344 501 IEEE 62209- NULL 2020 IEC 1528 502 IEEE 62704-4 NULL 2020 IEC 503 PAS 61076-2- Connectors for electrical and electronic equipment _ Product requirements _ Part 2-010: Circular connectors _ Detail 2020 IEC 010 specification for push-pull connectors with locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC 61076-2-109, I 504 PAS 63256 Industrial communication networks _ Broadband fieldbus specification _ Autbus - Edition 1.0 2020 IEC 505 PAS 63267-3- Fibre optic interconnecting devices and passive components _ Fibre optic connector optical interfaces _ Part 3-31: End face 2020 IEC 31 geometry _ Flat PC PPS rectangular ferrule multimode fibres - Edition 1.0 506 PAS 63324 Zhaga interface specification Book 1 and Book 10 - Edition 1.0 2020 IEC 507 PAS 63325 Lifecycle requirements for functional safety and security for IACS - Edition 1.0 2020 IEC 508 PAS 63328 Zhaga interface specification Book 1 and Book 12 - Edition 1.0 2020 IEC 509 PAS 63329 Zhaga interface specification Book 1 and Book 14 - Edition 1.0 2020 IEC 510 SRD 62559-4 Use case methodology _ Part 4: Best practices in use case development for IEC standardization processes and some 2020 IEC examples for application outside standardization - Edition 1.0 511 SRD 63199 Top priority standards development status in the domain of smart energy - Edition 1.0 2020 IEC 512 SRD 63234-1 Economic evaluation of active assisted living services _ Part 1: Framework - Edition 1.0 2020 IEC 513 SRD 63234-2 Economic evaluation of active assisted living services _ Part 2: Example of use _ Monitoring patients with chronic diseases 2020 IEC - Edition 1.0 514 SRD 63268 NULL 2020 IEC 515 TR 60076-26 Power transformers _ Part 26: Functional requirements of insulating liquids for use in power transformers - Edition 1.0 2020 IEC 516 TR 60269-5 Low-voltage fuses _ Part 5: Guidance for the application of low-voltage fuses - Edition 2.1; Consolidated Reprint 2020 IEC 517 TR 60479-4 Effects of current on human beings and livestock _ Part 4: Effects of lightning strokes - Edition 3.0 2020 IEC 518 TR 60522-2 Medical electrical equipment _ Diagnostic X-rays _ Part 2: Guidance and rationale on quality equivalent filtration and 2020 IEC permanent filtration - Edition 1.0 519 TR 60904-14 Photovoltaic devices _ Part 14: Guidelines for production line measurements of single-junction PV module maximum 2020 IEC power output and reporting at standard test conditions - Edition 1.0 520 TR 60919-1 Performance of high-voltage direct current (HVDC) systems with line?commutated converters _ Part 1: Steady-state 2020 IEC conditions - Edition 4.0 521 TR 60919-2 Performance of high-voltage direct current (HVDC) systems with linecommutated converters _ Part 2: Faults and switching 2020 IEC - Edition 2.2; Consolidated Reprint 522 TR 61000-4-40 Electromagnetic compatibility (EMC) _ Part 4-40: Testing and measurement techniques _ Digital methods for the 2020 IEC measurement of power quantities of modulated or distorted signals - Edition 1.0 523 TR 61191-7 Printed board assemblies _ Part 7: Technical cleanliness of components and printed board assemblies - Edition 1.0 2020 IEC 524 TR 61292-3 Optical amplifiers _ Part 3: Classification, characteristics and applications - Edition 2.0 2020 IEC 525 TR 61340-1 Electrostatics _ Part 1: Electrostatic phenomena _ Principles and measurements - Edition 1.1; Consolidated Reprint 2020 IEC 526 TR 61400-12-4 Wind energy generation systems _ Part 12-4: Numerical site calibration for power performance testing of wind turbines - 2020 IEC Edition 1.0 527 TR 61431 Guidelines for the use of monitor systems for lead-acid traction batteries - Edition 2.0 2020 IEC 528 TR 61511-4 Functional safety _ Safety instrumented systems for the process industry sector _ Part 4: Explanation and rationale for 2020 IEC changes in IEC 61511-1 from Edition 1 to Edition 2 - Edition 1.0 529 TR 61547-1 Equipment for general lighting purposes _ EMC immunity requirements _ Part 1: Objective light flickermeter and voltage 2020 IEC fluctuation immunity test method - Edition 3.0 530 TR 61850-90-3 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION _ Part 90-3: Using IEC 2020 IEC CORR 1 61850 for condition monitoring diagnosis and analysis - Edition 1.0 531 TR 61850-90-4 Communication networks and systems for power utility automation _ Part 90-4: Network engineering guidelines - Edition 2020 IEC 2.0 532 TR 61850-90-6 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION _ Part 90-6: Use of IEC 2020 IEC CORR 1 61850 for Distribution Automation Systems - Edition 1.0 533 TR 61850-90-9 Communication networks and systems for power utility automation _ Part 90-9: Use of IEC 61850 for Electrical Energy 2020 IEC Storage Systems - Edition 1.0 534 TR 61850-90- Communication networks and systems for power utility automation _ Part 90-11: Methodologies for modelling of logics for 2020 IEC 11 IEC 61850 based applications - Edition 1.0 535 TR 61850-90- Communication networks and systems for power utility automation _ Part 90-12: Wide area network engineering 2020 IEC 12 guidelines - Edition 2.0 536 TR 61858-3 Electrical insulation systems _ Thermal evaluation of modifications to an established electrical insulation system (EIS) Part 2020 IEC 3: Clarification of electrical insulating materials (EIMs) and auxiliary materials - Edition 1.0 537 TR 62131-7 Environmental conditions _ Vibration and shock of electrotechnical equipment _ Part 7: Transportation by rotary wing 2020 IEC aircraft: - Edition 1.0 538 TR 62362 Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics _ 2020 IEC Guidance - Edition 2.0 539 TR 62396-8 Process management for avionics _ Atmospheric radiation effects _ Part 8: Proton, electron, pion, muon, alpha-ray fluxes 2020 IEC and single event effects in avionics electronic equipment _ Awareness guidelines - Edition 1.0 540 TR 62541-1 OPC unified architecture _ Part 1: Overview and concepts - Edition 3.0 2020 IEC 541 TR 62541-2 OPC Unified Architecture _ Part 2: Security Model - Edition 3.0 2020 IEC 542 TR 62544 High-voltage direct current (HVDC) systems _ Application of active filters - Edition 1.2; CONSOLIDATED REPRINT 2020 IEC 543 TR 62572-4 Fibre optic active components and devices _ Reliability standards _ Part 4: Guidelines for optical connector end-face 2020 IEC cleaning methods for receptacle style optical transceivers - Edition 2.0 544 TR 62595-1-4 Display lighting unit _ Part 1-4: Glass light guide plate - Edition 1.0 2020 IEC 545 TR 62629-51-1 3D display devices _ Part 51-1: Generic introduction of aerial display - Edition 1.0 2020 IEC 546 TR 62653 Guideline for safe operation of medical equipment used for haemodialysis treatments - Edition 2.0 2020 IEC 547 TR 62998-2 Safety of machinery _ Part 2: Examples of application - Edition 1.0 2020 IEC 548 TR 63043 Renewable energy power forecasting technology - Edition 1.0 2020 IEC 549 TR 63079 Code of practice for hearing-loop systems (HLS) - Edition 1.2; Consolidated Reprint 2020 IEC 550 TR 63082-1 Intelligent device management _ Part 1: Concepts and terminology - Edition 1.0 2020 IEC 551 TR 63099-2 Transmitting equipment for radiocommunication _ Radio-over-fibre technologies for electromagnetic-field measurement _ 2020 IEC Part 2: Radio-over-fibre technologies for electric-field sensing - Edition 1.0 552 TR 63141 Damp heat, steady state (unsaturated pressurized vapour with air) - Edition 1.0 2020 IEC 553 TR 63164-2 Reliability of industrial automation devices and systems _ Part 2: System reliability - Edition 1.0 2020 IEC 554 TR 63179-1 Guideline for planning of HVDC systems _ Part 1: HVDC systems with line-commutated converters - Edition 1.0 2020 IEC 555 TR 63196 Switchgear and controlgear and their assemblies for low voltage _ Energy efficiency - Edition 1.0 2020 IEC 556 TR 63211-2-12 Durability test methods for electronic displays _ Part 2-12: Environmental tests _ Environmental conditions of use, storage 2020 IEC and transportation of electronic displays - Edition 1.0 557 TR 63212 Harmonization of environmental performance criteria for electrical and electronic products _ Feasibility study - Edition 1.0 2020 IEC 558 TR 63227 Lightning and surge voltage protection for photovoltaic (PV) power supply systems - Edition 1.0 2020 IEC 559 TR 63239 Radio frequency beam wireless power transfer (WPT) for mobile devices - Edition 1.0 2020 IEC 560 TR 63279 Derisking photovoltaic modules _ Sequential and combined accelerated stress testing - Edition 1.0 2020 IEC 561 TR 63282 LVDC systems _ Assessment of standard voltages and power quality requirements - Edition 1.0 2020 IEC 562 TR 63289 Conceptual model for TC 100 standardization on multimedia cyber technology - Edition 1.0 2020 IEC 563 TR 63292 Photovoltaic power systems (PVPSs) _ Roadmap for robust reliability - Edition 1.0 2020 IEC 564 TR 63307 Measurement methods of the complex relative permeability and permittivity of noise suppression sheet - Edition 1.0 2020 IEC 565 TS 60034-34 Rotating electrical machines _ Part 34: AC adjustable speed rolling mill motors - Edition 1.0 2020 IEC 566 TS 60079-39 EXPLOSIVE ATMOSPHERES _ Part 39: Intrinsically safe systems with electronically controlled spark duration limitation 2020 IEC CORR 1 - Edition 1.0 567 TS 60364-8-3 Low-voltage electrical installations _ Part 8-3: Functional aspects _ Operation of prosumer_s electrical installations - 2020 IEC Edition 1.0 568 TS 61169-1-51 Radio frequency connectors _ Part 1-51: Technical specification of electrical tests _ Uncertainty specification of frequency 2020 IEC domain test for return loss - Edition 1.0 569 TS 61200-102 Electrical installation guide _ Part 102: Application guidelines for low-voltage direct current electrical installations not 2020 IEC intended to be connected to a public distribution network - Edition 1.0 570 TS 61850-1-2 Communication networks and systems for power utility automation _ Part 1-2: Guidelines on extending IEC 61850 - 2020 IEC Edition 1.0 571 TS 62153-4-1 Metallic communication cable test methods _ Part 4-1: Electromagnetic compatibility (EMC) _ Introduction to 2020 IEC electromagnetic screening measurements - Edition 1.1; Consolidated Reprint 572 TS 62196-3-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets _ Conductive charging of electric vehicles _ Part 3-1: Vehicle 2020 IEC connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system - Edition 1.0 573 TS 62257-9-8 Renewable energy and hybrid systems for rural electrification _ Part 9-8: Integrated systems _ Requirements for stand- 2020 IEC alone renewable energy products with power ratings less than or equal to 350 W - Edition 1.0 574 TS 62257-12-1 Recommendations for renewable energy and hybrid systems for rural electrification _ Part 12-1: Laboratory evaluation of 2020 IEC lamps and lighting appliances for off-grid electricity systems - Edition 3.0 575 TS 62282-9-101 Fuel cell technologies _ Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems 2020 IEC based on life cycle thinking _ Streamlined life-cycle considered environmental performance characterization of stationary fuel cell co 576 TS 62351-100-3 Power systems management and associated information exchange _ Data and communications security _ Part 100-3: 2020 IEC Conformance test cases for IEC 62351-3, the secure communication extension for profiles including TCP/IP - Edition 1.0 577 TS 62600-1 Marine energy _ Wave, tidal and other water current converters _ Part 1: Vocabulary - Edition 2.0 2020 IEC 578 TS 62600-3 Marine energy _ Wave, tidal and other water current converters _ Part 3: Measurement of mechanical loads - Edition 1.0 2020 IEC 579 TS 62600-4 Marine energy _ Wave, tidal and other water current converters _ Part 4: Specification for establishing qualification of new 2020 IEC technology - Edition 1.0 580 TS 62607-2-4 Nanomanufacturing _ Key control characteristics _ Part 2-4: Carbon nanotube materials _ Test methods for determination 2020 IEC of resistance of individual carbon nanotubes - Edition 1.0 581 TS 62607-3-3 Nanomanufacturing _ Key control characteristics _ Part 3-3: Luminescent nanomaterials _ Determination of fluorescence 2020 IEC lifetime of semiconductor quantum dots using time correlated single photon counting (TCSPC) - Edition 1.0 582 TS 62607-4-8 Nanomanufacturing _ Key control characteristics _ Part 4-8: Nano-enabled electrical energy storage _ Determination of 2020 IEC water content in electrode nanomaterials, Karl Fischer method - Edition 1.0 583 TS 62607-5-3 Nanomanufacturing _ Key control characteristics _ Part 5-3: Thin-film organic/nano electronic devices _ Measurements of 2020 IEC charge carrier concentration - Edition 1.0 584 TS 62607-6-1 Nanomanufacturing _ Key control characteristics _ Part 6-1: Graphene-based material _ Volume resistivity: four probe 2020 IEC method - Edition 1.0 585 TS 62607-6-3 Nanomanufacturing _ Key control characteristics _ Part 6-3: Graphene-based material _ Domain size: substrate oxidation 2020 IEC IEC - Edition 1.0 586 TS 62607-6-13 NANOMANUFACTURING _ KEY CONTROL CHARACTERISTICS _ Part 6-13: Graphene powder _ Oxygen 2020 IEC CORR 1 functional group content: Boehm titration method - Edition 1.0 587 TS 62607-6-13 Nanomanufacturing _ Key control characteristics _ Part 6-13: Graphene powder _ Oxygen functional group content: 2020 IEC Boehm titration method - Edition 1.0 588 TS 62607-6-14 NULL 2020 IEC 589 TS 62607-8-1 Nanomanufacturing _ Key control characteristics _ Part 8-1: Nano-enabled metal-oxide interfacial devices _ Test method 2020 IEC for defect states by thermally stimulated current - Edition 1.0 590 TS 62686-1 Process management for avionics _ Electronic components for aerospace, defence and high performance (ADHP) 2020 IEC applications _ Part 1: General requirements for high reliability integrated circuits and discrete semiconductors - Edition 3.0 591 TS 62749 Assessment of power quality _ Characteristics of electricity supplied by public networks - Edition 2.0 2020 IEC 592 TS 62788-5-2 Measurement procedures for materials used in photovoltaic modules _ Part 5-2: Edge seals _ Durability evaluation 2020 IEC guideline - Edition 1.0 593 TS 62804-1-1 Photovoltaic (PV) modules _ Test methods for the detection of potential-induced degradation _ Part 1-1: Crystalline silicon 2020 IEC _ Delamination - Edition 1.0 594 TS 62836 Measurement of internal electric field in insulating materials _ Pressure wave propagation method - Edition 1.0 2020 IEC 595 TS 62862-3-3 Solar thermal electric plants _ Part 3-3: Systems and components _ General requirements and test methods for solar 2020 IEC receivers - Edition 1.0 596 TS 62882 Hydraulic machines _ Francis turbine pressure fluctuation transposition - Edition 1.0 2020 IEC 597 TS 62885-1 Surface cleaning appliances _ Part 1: General requirements on test material and test equipment - Edition 3.0 2020 IEC 598 TS 62898-3-1 Microgrids _ Part 3-1: Technical requirements _ Protection and dynamic control - Edition 1.0 2020 IEC 599 TS 62910 Utility-interconnected photovoltaic inverters _ Test procedure for under voltage ride-through measurements - Edition 2.0 2020 IEC 600 TS 63106-1 Simulators used for testing of photovoltaic power conversion equipment _ Recommendations _ Part 1: AC power 2020 IEC simulators - Edition 1.0 601 TS 63107 Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies (PSC assemblies) 2020 IEC according to IEC 61439-2 - Edition 1.0 602 TS 63126 Guidelines for qualifying PV modules, components and materials for operation at high temperatures - Edition 1.0 2020 IEC 603 TS 63134 Active assisted living (AAL) use cases - Edition 1.0 2020 IEC 604 TS 63144-1 Industrial process control devices _ Thermographic cameras _ Part 1: Metrological characterization - Edition 1.0 2020 IEC 605 TS 63164-1 Reliability of industrial automation devices and systems _ Part 1: Assurance of automation devices reliability data and 2020 IEC specification of their source - Edition 1.0 606 TS 63208 Low-voltage switchgear and controlgear _ Security aspects - Edition 1.0 2020 IEC 607 WP Safety in NULL 2020 IEC the future 608 IECEE 02-1 NULL 2020 IEC 609 IECEE 02-2 NULL 2020 IEC 610 IECEE 02-3 NULL 2020 IEC 611 IECEE 02 NULL 2020 IEC 612 IECEE NULL 2020 IEC Definitions 613 IECEE OD- NULL 2020 IEC 2004 614 IECEE OD- NULL 2020 IEC 2005-2 615 IECEE OD- NULL 2020 IEC 2006 616 IECEE OD- NULL 2020 IEC 2007 617 IECEE OD- NULL 2020 IEC 2010 618 IECEE OD- NULL 2020 IEC 2011 619 IECEE OD- NULL 2020 IEC 2020 620 IECEE OD- NULL 2020 IEC 2020-F1 621 IECEE OD- NULL 2020 IEC 2020-F2 622 IECEE OD- NULL 2020 IEC 2020-F3 623 IECEE OD- NULL 2020 IEC 2020-F4 624 IECEE OD- NULL 2020 IEC 2020-F5 625 IECEE OD- NULL 2020 IEC 2020-F7 626 IECEE OD- NULL 2020 IEC 2020-F8 627 IECEE OD- NULL 2020 IEC 2021 628 IECEE OD- NULL 2020 IEC 2026 629 IECEE OD- NULL 2020 IEC 2034 630 IECEE OD- NULL 2020 IEC 2034-F1 631 IECEE OD- NULL 2020 IEC 2037 632 IECEE OD- NULL 2020 IEC 2037-F1 633 IECEE OD- NULL 2020 IEC 2037-F2 634 IECEE OD- NULL 2020 IEC 2037-F3 635 IECEE OD- NULL 2020 IEC 2043 636 IECEE OD- NULL 2020 IEC 2048 637 IECEE OD- NULL 2020 IEC 2048-F2-2 638 IECEE OD- NULL 2020 IEC 2048-F3-2 639 IECEE OD- NULL 2020 IEC 2055 640 IECEE OD- NULL 2020 IEC 2059 641 IECEE OD- NULL 2020 IEC 2061 642 IECEE OD- NULL 2020 IEC 2064 643 IECEE OD-G- NULL 2020 IEC 2058 644 IECEx OD 033 NULL 2020 IEC 645 IECEx OD 060 NULL 2020 IEC 646 IECQ 01-S NULL 2020 IEC 647 IECQ 03-1 NULL 2020 IEC 648 IECQ 03-2-1 NULL 2020 IEC 649 IECQ 03-6 NULL 2020 IEC 650 IECQ OD 0201 NULL 2020 IEC 651 IECQ OD NULL 2020 IEC 3407-1 652 IECQ OD 3803 NULL 2020 IEC 653 31010 Risk management - Risk assessment techniques 2019 IEC 0 654 55015 NULL 2019 IEC 0 655 55016-1-1 NULL 2019 IEC 0 656 55016-1-4 NULL 2019 IEC 0 657 60027-2 Letter Symbols to Be Used in Electrical Technology - Part 2: Telecommunications and Electronics - Edition 3.0 2019 IEC 0 658 60034-23 Rotating electrical machines - Part 23: Repair, overhaul and reclamation 2019 IEC 0 659 60050-171 International Electrotechnical Vocabulary (IEV) - Part 171: Digital technology - Fundamental concepts 2019 IEC 0 660 60051-9 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: Recommended Test 2019 IEC 0 Methods - Edition 4.0 661 60068-2-82 Environmental testing Part 2-82: Tests Test Tx: Whisker test methods for electronic and electric components - Edition 1.0; 2019 IEC 0 The contents of the corrigendum of December 2009 have been included 662 60068-2-85 Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication 2019 IEC 0 663 60068-3-3 Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments - Edition 1.0 2019 IEC 0 664 60071-1 Insulation co-ordination Part 1: Definitions, principles and rules - Edition 8.1 Consolidated Reprint 2019 IEC 0 665 60076-22-1 Power transformers - Part 22-1: Power transformer and reactor fittings - Protective devices 2019 IEC 0 666 60076-22-2 Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators 2019 IEC 0 667 60076-22-3 Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers 2019 IEC 0 668 60076-22-4 Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers 2019 IEC 0 669 60879 Performance and Construction of Electric Circulating Fans and Regulators - Edition 1.0; Includes Corrigendum: 1992 2019 IEC 0 670 60898-3 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit- 2019 IEC 0 breakers for DC operation 671 60904-3 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral 2019 IEC 0 irradiance data - Edition 3.0 672 60904-7 Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices - 2019 IEC 0 Edition 3.0 673 60917-1 Modular order for the development of mechanical structures for electronic equipment practices Part 1: Generic standard - 2019 IEC 0 Edition 1.1 Consolidated Reprint 674 60934 Circuit-breakers for equipment (CBE) - Edition 3.2 Consolidated Reprint 2019 IEC 0 675 60947-4-1 Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters Electromechanical contactors and motor- 2019 IEC 0 starters - Edition 3.1 Consolidated Reprint 676 60947-7-4 Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment PCB terminal blocks for copper conductors - 2019 IEC 0 Edition 1.0 677 60947-9-1 Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices 2019 IEC 0 678 60964 Nuclear power plants Control rooms Design - Edition 2.0 2019 IEC 0 679 60966-1 Radio Frequency and Coaxial Cable Assemblies - Part 1: General Specification - General Requirements and Test Methods - 2019 IEC 0 Edition 2.0; IECQ QC 140000 680 60974-2 Arc welding equipment Part 2: Liquid cooling systems - Edition 3.0 2019 IEC 0 681 60974-3 Arc welding equipment Part 3: Arc striking and stabilizing devices - Edition 3.0 2019 IEC 0 682 60974-5 Arc welding equipment Part 5: Wire feeders - Edition 3.0 2019 IEC 0 683 60974-7 Arc welding equipment Part 7: Torches - Edition 3.0 2019 IEC 0 684 61000-3-2 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 2019 IEC 0 â_¤ 16 A per phase) - Edition 4.0 685 61000-3-11 Electromagnetic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations and flicker in 2019 IEC 0 public low-voltage supply systems Equipment with rated current â_¤75 A and subject to conditional connection - Edition 2.0 686 61000-4-18 Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques Damped oscillatory wave immunity 2019 IEC 0 test - Edition 1.1; Consolidated Reprint 687 61000-4-25 Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques HEMP immunity test methods for 2019 IEC 0 equipment and systems - Edition 1.1; Consolidated Reprint 688 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and 2019 IEC 0 light-industrial environments - Edition 3.0 689 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments - 2019 IEC 0 Edition 3.0 690 61000-6-4 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments - Edition 2019 IEC 0 2.1; Consolidated Reprint 691 61010-1-2010 NULL 2019 IEC 0 amd1-2016 co 692 61010-2-010 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular 2019 IEC 0 requirements for laboratory equipment for the heating of materials - Edition 3.0 693 61010-2-011 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-011: Particular 2019 IEC 0 requirements for refrigerating equipment - Edition 1.0 694 61010-2-012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-012: Particular 2019 IEC 0 requirements for climatic and environmental testing and other temperature conditioning equipment - Edition 1.0 695 61010-2-081 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular 2019 IEC 0 requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes - Edition 2.0 696 61010-2-091 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-091: Particular 2019 IEC 0 requirements for cabinet X-ray systems - Edition 1.0 697 61020-1 Electromechanical switches for use in electrical and electronic equipment Part 1: Generic specification - Edition 2.0 2019 IEC 0 698 61034-1 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus - Edition 3.1 2019 IEC 0 Consolidated Reprint 699 61034-2 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements - 2019 IEC 0 Edition 3.1; Consolidated Reprint 700 61058-2-6 Switches for appliances Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, 2019 IEC 0 transportable tools and lawn and garden machinery - Edition 1.0 701 61076-1 Connectors for electronic equipment Product requirements Part 1: Generic specification - Edition 2.0 2019 IEC 0 702 61076-3-123 Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail 2019 IEC 0 specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull loc 703 61076-3-124 Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail 2019 IEC 0 specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz 704 61097-4 Global maritime distress and safety system (GMDSS) Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group 2019 IEC 0 call (EGC) equipment Operational and performance requirements, methods of testing and required test results - Edition 3.1; Consolidated 705 61097-6 Global maritime distress and safety system (GMDSS) Part 6: Narrowband direct-printing telegraph equipment for the 2019 IEC 0 reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) - Edition 2.1; Consolidated Reprint 706 61123 Reliability Testing Compliance Test Plans for Success Ratio - Edition 1.0; Replaces IEC 60605-5: 1982 2019 IEC 0 707 61131-10 Programmable controllers - Part 10: PLC open XML exchange format 2019 IEC 0 708 61156-11 Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with 2019 IEC 0 transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification 709 61158-1 Industrial communication networks Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 2019 IEC 0 61784 series - Edition 1.0 710 61158-3-4 Industrial communication networks Fieldbus specifications Part 3-4: Data-link layer service definition Type 4 elements - 2019 IEC 0 Edition 2.0 711 61158-3-12 Industrial communication networks Fieldbus specifications Part 3-12: Data-link layer service definition Type 12 elements 2019 IEC 0 - Edition 3.0 712 61158-3-19 Industrial communication networks Fieldbus specifications Part 3-19: Data-link layer service definition Type 19 elements 2019 IEC 0 - Edition 3.0 713 61158-3-21 Industrial communication networks Fieldbus specifications Part 3-21: Data-link layer service definition Type 21 elements 2019 IEC 0 - Edition 1.0 714 61158-3-25 Industrial communication networks - Fieldbus specifications - Part 3-25: Data-link layer service definition - Type X 2019 IEC 0 elements 715 61158-4-2 Industrial communication networks Fieldbus specifications Part 4-2: Data-link layer protocol specification Type 2 2019 IEC 0 elements - Edition 3.0 716 61158-4-3 Industrial communication networks Fieldbus specifications Part 4-3: Data-link layer protocol specification Type 3 2019 IEC 0 elements - Edition 3.0 717 61158-4-4 Industrial communication networks Fieldbus specifications Part 4-4: Data-link layer protocol specification Type 4 2019 IEC 0 elements - Edition 2.0 718 61158-4-12 Industrial communication networks Fieldbus specifications Part 4-12: Data-link layer protocol specification Type 12 2019 IEC 0 elements - Edition 3.0 719 61158-4-19 Industrial communication networks Fieldbus specifications Part 4-19: Data-link layer protocol specification Type 19 2019 IEC 0 elements - Edition 3.0 720 61158-4-21 Industrial communication networks Fieldbus specifications Part 4-21: Data-link layer protocol specification Type 21 2019 IEC 0 elements - Edition 1.0 721 61158-4-24 Industrial communication networks Fieldbus specifications Part 4-24: Data-link layer protocol specification Type 24 2019 IEC 0 elements - Edition 1.0 722 61158-4-25 Industrial communication networks - Fieldbus specifications - Part 4-25: Data-link layer protocol specification - Type 25 2019 IEC 0 elements 723 61158-5-2 Industrial communication networks Fieldbus specifications Part 5-2: Application layer service definition Type 2 elements 2019 IEC 0 - Edition 3.0 724 61158-5-4 Industrial communication networks Fieldbus specifications Part 5-4: Application layer service definition Type 4 elements 2019 IEC 0 - Edition 2.0 725 61158-5-10 Industrial communication networks Fieldbus specifications Part 5-10: Application layer service definition Type 10 2019 IEC 0 elements - Edition 3.0 726 61158-5-12 Industrial communication networks Fieldbus specifications Part 5-12: Application layer service definition Type 12 2019 IEC 0 elements - Edition 3.0 727 61158-5-19 Industrial communication networks Fieldbus specifications Part 5-19: Application layer service definition Type 19 2019 IEC 0 elements - Edition 3.0 728 61158-5-21 Industrial communication networks Fieldbus specifications Part 5-21: Application layer service definition Type 21 2019 IEC 0 elements - Edition 1.0 729 61158-5-23 Industrial communication networks Fieldbus specifications Part 5-23: Application layer service definition Type 23 2019 IEC 0 elements - Edition 1.0 730 61158-5-25 Industrial communication networks - Fieldbus specifications - Part 5-25: Application layer service definition - Type 25 2019 IEC 0 elements 731 61158-5-26 Industrial communication networks - Fieldbus specifications - Part 5-26: Application layer service definition - Type 26 2019 IEC 0 elements 732 61158-6-2 Industrial communication networks Fieldbus specifications Part 6-2: Application layer protocol specification Type 2 2019 IEC 0 elements - Edition 3.0 733 61158-6-3 Industrial communication networks Fieldbus specifications Part 6-3: Application layer protocol specification Type 3 2019 IEC 0 elements - Edition 3.0 734 61158-6-4 Industrial communication networks Fieldbus specifications Part 6-4: Application layer protocol specification Type 4 2019 IEC 0 elements - Edition 2.0 735 61158-6-10 Industrial communication networks Fieldbus specifications Part 6-10: Application layer protocol specification Type 10 2019 IEC 0 elements - Edition 3.0 736 61158-6-12 Industrial communication networks Fieldbus specifications Part 6-12: Application layer protocol specification Type 12 2019 IEC 0 elements - Edition 3.0 737 61158-6-19 Industrial communication networks Fieldbus specifications Part 6-19: Application layer protocol specification Type 19 2019 IEC 0 elements - Edition 3.0 738 61158-6-21 Industrial communication networks Fieldbus specifications Part 6-21: Application layer protocol specification Type 21 2019 IEC 0 elements - Edition 1.0 739 61158-6-23 Industrial communication networks Fieldbus specifications Part 6-23: Application layer protocol specification Type 23 2019 IEC 0 elements - Edition 1.0 740 61158-6-25 Industrial communication networks - Fieldbus specifications - Part 6-25: Application layer protocol specification - Type 25 2019 IEC 0 elements 741 61158-6-26 Industrial communication networks - Fieldbus specifications - Part 6-26: Application layer protocol specification - Type 26 2019 IEC 0 elements 742 61167-2018 NULL 2019 IEC 0 cor1 743 61169-1-2 Radio-frequency connectors - Part 1-2: Electrical test methods - Insertion loss 2019 IEC 0 744 61169-24 Radio-frequency connectors Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, 2019 IEC 0 typically for use in 75 ohm cable networks (type F) - Edition 2.0 745 61169-64 Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer 2019 IEC 0 conductor - Characteristic impedance 50 ? (type 0,8) 746 61184 Bayonet lampholders - Edition 4.0 2019 IEC 0 747 61188-6-4 Printed boards and printed board assemblies - Design and use - Part 6-4: Land pattern design - Generic requirements for 2019 IEC 0 dimensional drawings of surface mounted components (SMD) from the viewpoint of land pattern design 748 61191-2-2017 NULL 2019 IEC 0 cor1 749 61207-2 Expression of Performance of Gas Analyzers - Part 2: Oxygen in Gas (Utilizing High-Temperature Electrochemical 2019 IEC 0 Sensors) - Edition 1.0; Includes Corrigendum: 05/1994 750 61207-3 Gas Analyzers - Expression of Performance - Part 3: Paramagnetic Oxygen Analyzers - Edition 2.0 2019 IEC 0 751 61223-3-5 Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance of 2019 IEC 0 computed tomography X-ray equipment - Edition 1.0 752 61225 Nuclear power plants Instrumentation and control systems important to safety Requirements for electrical supplies - 2019 IEC 0 Edition 2.0 753 61238-1-1 Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and 2019 IEC 0 mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors - Edition 1.0 754 61238-1-2 Compression and mechanical connectors for power cables Part 1-2: Test methods and requirements for insulation piercing 2019 IEC 0 connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors - Edition 1.0 755 61238-1-3- NULL 2019 IEC 0 2019+A11 756 61280-4-1 Fibre-optic communication subsystem test procedures Part 4-1: Installed cable plant Multimode attenuation measurement 2019 IEC 0 - Edition 2.0 757 61291-5-2-2017 NULL 2019 IEC 0 cor1 758 61293 Marking of Electrical Equipment with Ratings Related to Electrical Supply - Safety Requirements - Edition 1.0 2019 IEC 0 759 61300-2-4 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - 2019 IEC 0 Fibre/cable retention - Edition 1.0 760 61300-2-46 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests 2019 IEC 0 Damp heat, cyclic - Edition 1.0 761 61300-2-54 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - 2019 IEC 0 Corrosive atmosphere (mixed gas) 762 61300-3-21 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-21: 2019 IEC 0 Examinations and measurements Switching time - Edition 2.0 763 61300-3-54 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-54: 2019 IEC 0 Examinations and measurements - Angular misalignment between ferrule bore axis and ferrule axis for cylindrical ferrules 764 61315 Calibration of fibre-optic power meters - Edition 2.0 2019 IEC 0 765 61333 Marking on U and E Ferrite Cores - Edition 1.0 2019 IEC 0 766 61400-1-2019 NULL 2019 IEC 0 cor1 767 61400-1 Wind turbines Part 1: Design requirements - Edition 3.1 Consolidated Reprint 2019 IEC 0 768 61400-2-2013 NULL 2019 IEC 0 cor1 769 61400-3-1 Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines 2019 IEC 0 770 61400-11-2012 NULL 2019 IEC 0 amd1-2018 c 771 61400-12-1- NULL 2019 IEC 0 2017 cor1 772 61400-21-1 Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines 2019 IEC 0 773 61400-24 Wind turbines Part 24: Lightning protection - Edition 1.0 2019 IEC 0 774 61400-26-1 Wind energy generation systems - Part 26-1: Availability for wind energy generation systems 2019 IEC 0 775 61439-3-2012 NULL 2019 IEC 0 cor2 776 61439-7-2018 NULL 2019 IEC 0 cor1 777 61482-1-1 Live working Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods Method 1: 2019 IEC 0 Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing - Edition 1.0 778 61496-3 Safety of machinery Electro-sensitive protective equipment Part 3: Particular requirements for Active Opto-electronic 2019 IEC 0 Protective Devices responsive to Diffuse Reflection (AOPDDR) - Edition 2.0 779 61500 Nuclear power plants Instrumentation and control important to safety Data communication in systems performing 2019 IEC 0 category A functions - Edition 2.0 780 61535 Installation couplers intended for permanent connection in fixed installations - Edition 1.1 Consolidated Reprint 2019 IEC 0 781 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2019 IEC 0 or monitoring of protective measures Part 1: General requirements - Edition 2.0 782 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2019 IEC 0 or monitoring of protective measures Part 2: Insulation resistance - Edition 2.0 783 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2019 IEC 0 or monitoring of protective measures Part 3: Loop impedance - Edition 2.0 784 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2019 IEC 0 or monitoring of protective measures Part 4: Resistance of earth connection and equipotential bonding - Edition 2.0 785 61557-5 Electrical Safety in Low Voltage Distribution Systems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, 2019 IEC 0 Measuring or Monitoring of Protective Measures - Part 5: Resistance to Earth - Edition 2.0 786 61557-6 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring 2019 IEC 0 or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems - Edition 2. 787 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2019 IEC 0 or monitoring of protective measures Part 7: Phase sequence - Edition 2.0 788 61558-1 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests - 2019 IEC 0 Edition 2.1 Consolidated Reprint 789 61563 Radiation Protection Instrumentation - Equipment for Measuring Specific Activity of Gamma-Emitting Radionuclides in 2019 IEC 0 Foodstuffs - Edition 1.0 790 61591 Household range hoods - Methods for measuring performance - Edition 1.1 Consolidated Reprint 2019 IEC 0 791 61643-32-2017 NULL 2019 IEC 0 cor1 792 61709-2017 NULL 2019 IEC 0 cor1 793 61747-30-3 Liquid crystal display devices - Part 30-3: Measuring methods for liquid crystal display modules - Motion artefact 2019 IEC 0 measurement of active matrix liquid crystal display modules 794 61747-30-5 Liquid crystal display devices - Part 30-5: Optical measuring methods of transmissive transparent LCD modules 2019 IEC 0 795 61747-40-1 Liquid crystal display devices Part 40-1: Mechanical testing of display cover glass for mobile devices Guidelines - Edition 2019 IEC 0 1.0 796 61753-1-2018 NULL 2019 IEC 0 cor1 797 61754-7-3 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-3: Type MPO 2019 IEC 0 connector family - Two fibre rows 16 fibre wide 798 61756-1 Fibre optic interconnecting devices and passive components Interface standard for fibre management systems Part 1: 2019 IEC 0 General and guidance - Edition 1.0 799 61784-1 Industrial communication networks Profiles Part 1: Fieldbus profiles - Edition 4.0 2019 IEC 0 800 61784-2 Industrial communication networks Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 2019 IEC 0 8802-3 - Edition 3.0 801 61784-3-12 Industrial communication networks Profiles Part 3-12: Functional safety fieldbuses Additional specifications for CPF 12 - 2019 IEC 0 Edition 1.0 802 61810-1 Electromechanical elementary relays Part 1: General and safety requirements - Edition 4.0 2019 IEC 0 803 61810-10 Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity 2019 IEC 0 relays 804 61820-1 Electrical installations for aeronautical ground lighting at aerodromes - Part 1: Fundamental principles 2019 IEC 0 805 61850-8-2 NULL 2019 IEC 0 806 61851-1 Electric vehicle conductive charging system Part 1: General requirements - Edition 3.0 2019 IEC 0 807 61857-32 Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors 2019 IEC 0 during diagnostic testing 808 61869-9 Instrument transformers - Part 9: Digital interface for instrument transformers - Edition 1.0 2019 IEC 0 809 61869-14 Instrument transformers Part 14: Additional requirements for current transformers for DC applications - Edition 1.0 2019 IEC 0 810 61869-15 Instrument transformers Part 15: Additional requirements for voltage transformers for DC applications - Edition 1.0 2019 IEC 0 811 61892-1 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions - Edition 3.0 2019 IEC 0 812 61892-2 Mobile and fixed offshore units Electrical installations Part 2: System design - Edition 2.0 2019 IEC 0 813 61892-3 Mobile and fixed offshore units Electrical installations Part 3: Equipment - Edition 3.0 2019 IEC 0 814 61892-4 Mobile and fixed offshore units Electrical installations Part 4: Cables - Edition 1.0 2019 IEC 0 815 61892-5 Mobile and fixed offshore units Electrical installations Part 5: Mobile units - Edition 3.0 2019 IEC 0 816 61892-6 Mobile and fixed offshore units Electrical installations Part 6: Installation - Edition 3.0 2019 IEC 0 817 61892-7 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas - Edition 3.0 2019 IEC 0 818 61935-1-1 Specification for the testing of balanced and coaxial information technology cabling - Part 1-1: Additional requirements for 2019 IEC 0 the measurement of transverse conversion loss and equal level transverse conversion transfer loss 819 61937-5 Digital Audio - Interface for Non-Linear PCM Encoded Audio Bitstreams Applying IEC 60958 - Part 5: Non-Linear PCM 2019 IEC 0 Bitstreams According to the DTS (Digital Theater Systems) Format(s) - Edition 2.0 820 61952-1 Insulators for overhead lines - Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V - 2019 IEC 0 Part 1: definitions, end fittings and designations 821 61967-1 Integrated Circuits - Measurement of Electromagnetic Emissions, 150 kHz to 1 GHz Part 1: General Conditions and 2019 IEC 0 Definitions - Edition 1.0 822 61968-4 Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records 2019 IEC 0 and asset management - Edition 1.0 823 61991 Railways Applications - Rolling Stock - Protective Provisions Against Electrical Hazards - Edition 1.0 2019 IEC 0 824 62025-2 High frequency inductive components Non-electrical characteristics and measuring methods Part 2: Test methods for non- 2019 IEC 0 electrical characteristics - Edition 1.0 825 62026-1 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 1: General rules - Edition 2.0 2019 IEC 0 826 62040-1 Uninterruptible power systems (UPS) Part 1: General and safety requirements for UPS - Edition 1.1; Consolidated Reprint 2019 IEC 0 827 62047-31 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial 2019 IEC 0 adhesion energy of layered MEMS materials 828 62047-32 Semiconductor devices - Micro-electromechanical devices - Part 32: Test method for the nonlinear vibration of MEMS 2019 IEC 0 resonators 829 62047-33 Semiconductor devices - Micro-electromechanical devices - Part 33: MEMS piezoresistive pressure-sensitive device 2019 IEC 0 830 62047-34 Semiconductor devices - Micro-electromechanical devices - Part 34: Test methods for MEMS piezoresistive pressure- 2019 IEC 0 sensitive device on wafer 831 62047-36 Semiconductor devices - Micro-electromechanical devices - Part 36: Environmental and dielectric withstand test methods 2019 IEC 0 for MEMS piezoelectric thin films 832 62056-8-4 NULL 2019 IEC 0 833 62087-7 NULL 2019 IEC 0 834 62097 Hydraulic machines, radial and axial Performance conversion method from model to prototype - Edition 1.0; Includes 2019 IEC 0 Access to Additional Content 835 62129-3 Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally 2019 IEC 0 referenced to a frequency comb 836 62138 Nuclear power plants Instrumentation and control important for safety Software aspects for computer-based systems 2019 IEC 0 performing category B or C functions - Edition 1.0 837 62148-19 Fibre optic active components and devices - Package and interface standards - Part 19: Photonic chip scale package 2019 IEC 0 838 62148-21 Fibre optic active components and devices - Package and interface standards - Part 21: Design guide of electrical interface 2019 IEC 0 of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA) 839 62209-3 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from 2019 IEC 0 hand-held and body-mounted wireless communication devices - Part 3: Vector measurement-based systems (Frequency range of 600 MHz to 6 GHz 840 62228-3 Integrated circuits - EMC evaluation of transceivers - Part 3: CAN transceivers 2019 IEC 0 841 62271-107 High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 2019 IEC 0 kV up to and including 52 kV - Edition 2.0 842 62271-109 High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches - Edition 2.1; 2019 IEC 0 Consolidated Reprint 843 62271-111 High-voltage switchgear and controlgear Part 111: Automatic circuit reclosers and fault interrupters for alternating current 2019 IEC 0 systems up to 38 kV - Edition 2.0 844 62271-209 High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated 2019 IEC 0 voltages above 52 kV Fluid-filled and extruded insulation cables Fluid-filled and dry-type cable-terminations - Edition 1.0 845 62271-214 High-voltage switchgear and controlgear - Part 214: Internal arc classification for metal-enclosed pole-mounted switchgear 2019 IEC 0 and controlgear for rated voltages above 1 kV and up to and including 52 kV 846 62275 Cable management systems Cable ties for electrical installations - Edition 2.0 2019 IEC 0 847 62281 Safety of primary and secondary lithium cells and batteries during transport - Edition 3.0 2019 IEC 0 848 62282-6-400 Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability 2019 IEC 0 849 62290-3 Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements 2019 IEC 0 specification 850 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz 2019 IEC 0 300 GHz) - Edition 1.0 851 62327 Radiation protection instrumentation Hand-held instruments for the detection and identification of radionuclides and for 2019 IEC 0 the indication of ambient dose equivalent rate from photon radiation - Edition 1.0 852 62343-1 Dynamic modules Part 1: Performance standards General conditions - Edition 1.0 2019 IEC 0 853 62343-2-1 Dynamic modules - Part 2-1: Reliability qualification - Test template 2019 IEC 0 854 62364 Hydraulic machines Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines - Edition 1.0 2019 IEC 0 855 62386-104 Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components 2019 IEC 0 856 62386-220 Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally supplied emergency 2019 IEC 0 operation (device type 19) 857 62402 Obsolescence Management - Application Guide - Edition 1.0 2019 IEC 0 858 62430 Environmentally conscious design for electrical and electronic products - Edition 1.0 2019 IEC 0 859 62433-1 EMC IC modelling - Part 1: General modelling framework 2019 IEC 0 860 62443-2-4- NULL 2019 IEC 0 2019+A1 861 62443-4-2 Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components 2019 IEC 0 862 62453-41 NULL 2019 IEC 0 863 62453-51-10 NULL 2019 IEC 0 864 62453-62 NULL 2019 IEC 0 865 62464-1 Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters - Edition 2019 IEC 0 1.0 866 62474 Material declaration for products of and for the electrotechnical industry - Edition 1.0 2019 IEC 0 867 62496-4-1 Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve- 2019 IEC 0 channel PMT connectors 868 62613-1 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) Part 1: General 2019 IEC 0 requirements - Edition 1.0 869 62629-12-2 3D display devices - Part 12-2: Measuring methods for stereoscopic displays using glasses - Motion blur 2019 IEC 0 870 62631-3-4 Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC 2019 IEC 0 methods) - Volume resistance and volume resistivity at elevated temperatures 871 62645 Nuclear power plants Instrumentation and control systems Requirements for security programmes for computer-based 2019 IEC 0 systems - Edition 1.0 872 62660-1 Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing - Edition 1.0 2019 IEC 0 873 62660-2 Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing - Edition 1.0 2019 IEC 0 874 62668-1 Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled 2019 IEC 0 electronic components 875 62668-2 Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised 2019 IEC 0 sources 876 62676-2-31 Video surveillance systems for use in security applications - Part 2-31: Live streaming and control based on web services 2019 IEC 0 877 62676-2-32 Video surveillance systems for use in security applications - Part 2-32: Recording control and replay based on web services 2019 IEC 0 878 62677-3-103 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat- 2019 IEC 0 shrinkable, polyolefin, conductive moulded shapes for medium voltage applications 879 62680-1-5 Universal serial bus interfaces for data and power - Part 1-5: Common components - USB Audio 3.0 device class definition 2019 IEC 0 880 62680-1-6 Universal serial bus interfaces for data and power - Part 1-6: Common components - USB Audio 3.0 device class definition 2019 IEC 0 basic functions 881 62680-1-7 Universal serial bus interfaces for data and power - Part 1-7: Common components - USB Audio 3.0 device class definition 2019 IEC 0 data formats 882 62680-1-8 Universal serial bus interfaces for data and power - Part 1-8: Common components - USB Audio 3.0 device class definition 2019 IEC 0 terminal types 883 62706 Radiation protection instrumentation Environmental, electromagnetic and mechanical performance requirements - Edition 2019 IEC 0 1.0 884 60479-2 Effects of current on human beings and livestock - Part 2: Special aspects 2019 IEC 0 885 60480 Guidelines for the checking and treatment of sulfur hexafluoride (SF6 ) taken from electrical equipment and specification 2019 IEC 0 for its re-use - Edition 2.0 886 60512-11-1 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: 2019 IEC 0 Climatic tests - Section 1: Test 11a - Climatic sequence - Edition 1.0 887 60512-23-3 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 23-3: 2019 IEC 0 Test 23c: Shielding Effectiveness of Connectors and Accessories - Edition 1.0; Includes Corrigendum 1: 4/2003 888 60512-99-002 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 2019 IEC 0 99b: Test schedule for unmating under electrical load 889 60534-3-1 Industrial-Process Control Valves - Part 3-1: Dimensions - Face-to-Face Dimensions for Flanged, Two-Way, Globe-Type, 2019 IEC 0 Straight Pattern and Centre-To-Face Dimensions for Flanged, Two-Way, Globe-Type, Angle Pattern Control Valves - Edition 1.0; Supersedes IE 890 60539-2 Directly heated negative temperature coefficient thermistors Part 2: Sectional specification Surface mount negative 2019 IEC 0 temperature coefficient thermistors - Edition 1.1 Consolidated Reprint 891 60565-2 Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure 2019 IEC 0 calibration 892 60601-2-16 Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of 2019 IEC 0 haemodialysis, haemodiafiltration and haemofiltration equipment - Edition 4.0 893 60601-2-28 Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray 2019 IEC 0 tube assemblies for medical diagnosis - Edition 2.0 894 60601-2-39 Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal 2019 IEC 0 dialysis equipment - Edition 2.0 895 60601-2-46 Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of 2019 IEC 0 operating tables - Edition 3.0 896 60601-2-75 Medical electrical equipment Part 2-75: Particular requirements for the basic safety and essential performance of 2019 IEC 0 photodynamic therapy and photodynamic diagnosis equipment - Edition 1.0 897 60601-2-76 Medical electrical equipment Part 2-76: Particular requirements for the basic safety and essential performance of low 2019 IEC 0 energy ionized gas haemostasis equipment - Edition 1.0 898 60601-2-83 Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home 2019 IEC 0 light therapy equipment 899 60633 Terminology for high-voltage direct current (HVDC) transmission - Edition 2.2 Consolidated Reprint 2019 IEC 0 900 60665 A.C. Electric Ventilating Fans and Regulators for Household and Similar Purposes - Edition 1.0 2019 IEC 0 901 60674-3-2 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: 2019 IEC 0 Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation - Edition 1.0 902 60684-3-214 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 214: Heat-Shrinkable, 2019 IEC 0 Polyolefin Sleeving, Not Flame Retarded, Shrink Ratio 3:1 - Thick and Medium Wall - Edition 3.0 903 60684-3-216 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heatshrinkable, flame- 2019 IEC 0 retarded, limited-fire-hazard sleeving - Edition 1.2 Consolidated Reprint 904 60684-3-247 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 247: Heatshrinkable, polyolefin 2019 IEC 0 sleeving, dual wall, not flame retarded, thick and medium wall - Edition 1.0 905 60684-3-280 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 280: Heatshrinkable, polyolefin 2019 IEC 0 sleeving, anti-tracking - Edition 1.1 Consolidated Reprint 906 60684-3-283 AMENDMENT 1 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 283: 2019 IEC 0 Heatshrinkable, polyolefin sleeving for bus-bar insulation - Edition 1.1 Consolidated Reprint 907 60704-2-16 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-16: 2019 IEC 0 Particular requirements for washer-dryers 908 60709 Nuclear power plants Instrumentation and control systems important to safety Separation - Edition 2.0 2019 IEC 0 909 60721-3-3 Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their 2019 IEC 0 severities Stationary use at weatherprotected locations - Edition 2.2 Consolidated Reprint 910 60721-3-4 Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their 2019 IEC 0 Severities - Section 4: Stationary Use at Non-Weatherprotected Locations - Edition 2.0; Includes Amendment 1: 11/1996 911 60730-2-9- NULL 2019 IEC 0 2019+A1 912 60730-2-12 Automatic electrical controls - Part 2-12: Particular requirements for electrically operated door locks - Edition 3.0 2019 IEC 0 913 60730-2-14 Automatic electrical controls for household and similar use Part 2-14: Particular requirements for electric actuators - 2019 IEC 0 Edition 1.2 Consolidated Reprint 914 60730-2-15 Automatic electrical controls for household and similar use Part 2-15: Particular requirements for automatic electrical air 2019 IEC 0 flow, water flow and water level sensing controls - Edition 2.0 915 60746-4 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane 2019 IEC 0 covered amperometric sensors - Edition 1.0 916 60747-5-8 Semiconductor devices - Part 5-8: Optoelectronic devices - Light emitting diodes - Test method of optoelectronic 2019 IEC 0 efficiencies of light emitting diodes 917 60747-5-9 Semiconductor devices - Part 5-9: Optoelectronic devices - Light emitting diodes - Test method of the internal quantum 2019 IEC 0 efficiency based on the temperature-dependent electroluminescence 918 60747-5-10 Semiconductor devices - Part 5-10: Optoelectronic devices - Light emitting diodes - Test method of the internal quantum 2019 IEC 0 efficiency based on the room-temperature reference point 919 60747-5-11 Semiconductor devices - Part 5-11: Optoelectronic devices - Light emitting diodes - Test method of radiative and 2019 IEC 0 nonradiative currents of light emitting diodes 920 60747-9 Semiconductor devices Discrete devices Part 9: Insulated-gate bipolar transistors (IGBTs) - edition 2.0 2019 IEC 0 921 60747-14-10 Semiconductor devices - Part 14-10: Semiconductor sensors - Performance evaluation methods for wearable glucose 2019 IEC 0 sensors 922 60747-16-6 Semiconductor devices - Part 16-6: Microwave integrated circuits - Frequency multipliers 2019 IEC 0 923 60747-18-1 Semiconductor devices - Part 18-1: Semiconductor bio sensors - Test method and data analysis for calibration of lens-free 2019 IEC 0 CMOS photonic array sensors 924 60747-18-3 Semiconductor devices - Part 18-3: Semiconductor bio sensors - Fluid flow characteristics of lens-free CMOS photonic 2019 IEC 0 array sensor package modules with fluidic system 925 60747-19-1 Semiconductor devices - Part 19-1: Smart sensors - Control scheme of smart sensors 2019 IEC 0 926 60749-17 Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation - Edition 1.0 2019 IEC 0 927 60749-18 Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) - Edition 1.0 2019 IEC 0 928 60754-3 Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content 2019 IEC 0 by ion chromatography - Edition 1.0 929 60793-1-31 Optical fibres Part 1-31: Measurement methods and test procedures Tensile strength - Edition 2.0 2019 IEC 0 930 60793-1-40 Optical Fibres - Part 1-40: Measurement and Test Procedures - Attenuation - Edition 1.0 2019 IEC 0 931 60793-2-10 Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres - Edition 5.0 2019 IEC 0 932 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres - Edition 5.0 2019 IEC 0 933 60794-1-23 Optical fibre cables Part 1-23: Generic specification Basic optical cable test procedures Cable element test methods - 2019 IEC 0 Edition 1.0 934 60794-2-11 Optical fibre cables Part 2-11: Indoor optical fibre cables Detailed specification for simplex and duplex cables for use in 2019 IEC 0 premises cabling - Edition 2.0 935 60794-2-21 Optical fibre cables Part 2-21: Indoor optical fibre cables Detailed specification for multi-fibre optical distribution cables 2019 IEC 0 for use in premises cabling - Edition 2.0 936 60794-2-30 Optical fibre cables Part 2-30: Indoor cables Family specification for ribbon cables - Edition 2.0 2019 IEC 0 937 60794-2-31 Optical fibre cables Part 2-31: Indoor cables Detailed specification for optical fibre ribbon cables for use in premises 2019 IEC 0 cabling - Edition 2.0 938 60825-12 Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information - 2019 IEC 0 Edition 1.0 939 62765-2 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters 2019 IEC 0 - Part 2: Temperature sensors 940 62783-1 Twinax cables for digital communications - Part 1: Generic specification 2019 IEC 0 941 62783-2 Twinax cables for digital communications - Part 2: Family specification - Cable for Ethernet-over-twinax physical 2019 IEC 0 interfaces 942 62812 Low resistance measurements - Methods and guidance 2019 IEC 0 943 62830-4 Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 4: Test and evaluation methods 2019 IEC 0 for flexible piezoelectric energy harvesting devices 944 62830-6 Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 6: Test and evaluation methods 2019 IEC 0 for vertical contact mode triboelectric energy harvesting devices 945 62840-2 Electric vehicle battery swap system - Part 2: Safety requirements - Edition 1.0 2019 IEC 0 946 62878-1 Device embedding assembly technology - Part 1: Generic specification for device embedded substrates 2019 IEC 0 947 62878-2-5 Device embedding assembly technology - Part 2-5: Guidelines - Implementation of a 3D data format for device embedded 2019 IEC 0 substrate 948 62884-4 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 4 : Short-term frequency stability test 2019 IEC 0 methods 949 62885-8 Surface cleaning appliances - Part 8: Dry vacuum cleaners for commercial use - Methods for measuring the performance 2019 IEC 0 950 62885-9 Surface cleaning appliances - Part 9: Floor treatment machines with or without traction drive, for commercial use - 2019 IEC 0 Methods for measuring the performance 951 62888-6 Railway applications - Energy measurement on board trains - Part 6: Requirements for purposes other than billing 2019 IEC 0 952 62892 Extended thermal cycling of PV modules - Test procedure 2019 IEC 0 953 62899-101 Printed electronics - Part 101: Terminology - Vocabulary 2019 IEC 0 954 62899-202-3 Printed electronics - Part 202-3: Materials - Conductive ink - Measurement of sheet resistance of conductive films - 2019 IEC 0 Contactless method 955 62899-204 Printed electronics - Part 204: Materials - Insulator ink - Measurement methods of properties of insulator inks and printed 2019 IEC 0 insulating layers 956 62899-501-1 Printed electronics - Part 501-1: Quality assessment - Failure modes and mechanical testing - Flexible and/or bendable 2019 IEC 0 primary or secondary cells 957 62899-502-2 Printed electronics - Part 502-2: Quality assessment - Organic light emitting diode (OLED) elements - Combined 2019 IEC 0 mechanical and environmental stress test methods for flexible OLED elements 958 62902 Secondary cells and batteries - Marking symbols for identification of their chemistry 2019 IEC 0 959 62908-12-20 Touch and interactive displays - Part 12-20: Measuring methods of touch displays - Multi-touch performance 2019 IEC 0 960 62909-2 Bi-directional grid-connected power converters - Part 2: Interface of GCPC and distributed energy resources 2019 IEC 0 961 62951-2 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 2: Evaluation method for electron mobility, 2019 IEC 0 sub-threshold swing and threshold voltage of flexible devices 962 62951-4 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 4: Fatigue evaluation for flexible conductive 2019 IEC 0 thin film on the substrate for flexible semiconductor devices 963 62951-5 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 5: Test method for thermal characteristics of 2019 IEC 0 flexible materials 964 62951-6 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 6: Test method for sheet resistance of 2019 IEC 0 flexible conducting films 965 62951-7 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 7: Test method for characterizing the barrier 2019 IEC 0 performance of thin film encapsulation for flexible organic semiconductor 966 62954 Nuclear power plants - Control rooms - Requirements for emergency response facilities 2019 IEC 0 967 62962 Particular requirements for load-shedding equipment (LSE) 2019 IEC 0 968 62966-1 Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and 2019 IEC 0 mechanical requirements 969 62985 Methods for calculating size specific dose estimates (SSDE) on computed tomography 2019 IEC 0 970 62990-1 Workplace atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases 2019 IEC 0 971 IEEE 62582-6 NULL 2019 IEC 0 972 IEEE 80005-1 NULL 2019 IEC 0 973 SRD 62913-1 Generic smart grid requirements - Part 1: Specific application of the Use Case methodology for defining generic smart grid 2019 IEC 0 requirements according to the IEC systems approach 974 SRD 62913-2-1 Generic smart grid requirements - Part 2-1: Grid related domains 2019 IEC 0 975 SRD 62913-2-2 Generic smart grid requirements - Part 2-2: Market related domain 2019 IEC 0 976 SRD 62913-2-3 Generic smart grid requirements - Part 2-3: Resources connected to the grid domains 2019 IEC 0 977 SRD 62913-2-4 NULL 2019 IEC 0 978 TR 60146-1-2 Semiconductor converters General requirements and line commutated converters Part 1-2: Application guide - Edition 4.0 2019 IEC 0 979 TR 60286-7 Packaging of components for automatic handling - Part 7: Introduction of a bulk blister pack for miniaturized components 2019 IEC 0 s Checklist for IEC 60825-1 - Edition 2.0 2019 IEC 0_آTR 60825-5 Safety of Laser Products - Part 5: Manufacturer 980 981 TR 61000-1-8 Electromagnetic compatibility - Part 1-8: Phase angles of harmonic current emissions and voltages in the public supply 2019 IEC 0 networks - Future expectations 982 TR 61189-5- Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-506: 2019 IEC 0 506 General test methods for materials and assemblies - An intercomparison evaluation to implement the use of fine-pitch test structures fo 983 TR 61244-4 Determination of long-term radiation ageing in polymers - Part 4: Effects of different temperatures and dose rates under 2019 IEC 0 radiation conditions 984 TR 61282-5 Fibre Optic Communication System Design Guides - Part 5: Accommodation and Compensation of Dispersion - Edition 2019 IEC 0 1.0 985 TR 61282-14 Fibre optic communication system design guides Part 14: Determination of the uncertainties of attenuation measurements 2019 IEC 0 in fibre plants - Edition 1.0; Includes Access to Additional Content 986 TR 61289 High frequency surgical equipment Operation and maintenance - Edition 1.0 2019 IEC 0 987 TR 61292-8 Optical amplifiers - Part 8: High-power amplifiers 2019 IEC 0 988 TR 61340-5-4 Electrostatics - Part 5-4: Protection of electronic devices from electrostatic phenomena - Compliance verification 2019 IEC 0 989 TR 61400-21-3 Wind energy generation systems - Part 21-3: Measurement and assessment of electrical characteristics - Wind turbine 2019 IEC 0 harmonic model and its application 990 TR 61577-5 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 5: General properties 2019 IEC 0 of radon and radon decay products and their measurement methods 991 TR 61850-7-6 Communication networks and systems for power utility automation - Part 7-6: Guideline for definition of Basic Application 2019 IEC 0 Profiles (BAPs) using IEC 61850 992 TR 61948-2 Nuclear Medicine Instrumentation - Routine Tests - Part 2: Scintillation Cameras and Single Photon Emission Computed 2019 IEC 0 Tomography Imaging - Edition 1.0 993 TR 61948-4 Nuclear medicine instrumentation Routine tests Part 4: Radionuclide calibrators - Edition 1.0 2019 IEC 0 994 TR 62343-6-11 Dynamic Modules - Part 6-11: Design guidelines - Software and hardware interface for optical multicast switches 2019 IEC 0 995 TR 62357-2 Power systems management and associated information exchange - Part 2: Use Cases and role model 2019 IEC 0 996 TR 62368-2 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 2019 IEC 0 62368-1 - Edition 2.0 997 TR 62453-51- Field device tool (FDT) interface specification Part 51-150: Communication implementation for common object model IEC 2019 IEC 0 150 61784 CPF 15 - Edition 1.0 998 TR 62453-52- Field device tool (FDT) interface specification Part 52-31: Communication implementation for common language 2019 IEC 0 31 infrastructure IEC 61784 CP 3/1 and CP 3/2 - Edition 1.0 999 TR 62453-52- Field device tool (FDT) interface specification - Part 52-32: Communication implementation for common language 2019 IEC 0 32 infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 - Edition 1.0 1000 TR 62453-52- Field device tool (FDT) interface specification Part 52-90: Communication implementation for common language 2019 IEC 0 90 infrastructure IEC 61784 CPF 9 - Edition 1.0 1001 TR 62453-52- Field device tool (FDT) interface specification Part 52-150: Communication implementation for common language 2019 IEC 0 150 infrastructure IEC 61784 CPF 15 - Edition 1.0 1002 TR 62559-1 Use case methodology - Part 1: Concept and processes in standardization 2019 IEC 0 1003 TR 62595-1-3 Display lighting unit - Part 1-3: Lighting units with arbitrary shapes 2019 IEC 0 1004 TR 62629-41-1 3D Display devices - Part 41-1: Generic introduction of holographic display 2019 IEC 0 1005 TR 62669 Case studies supporting IEC 62232 Determination of RF field strength and SAR in the vicinity of radiocommunication 2019 IEC 0 base stations for the purpose of evaluating human exposure - Edition 1.0 1006 TR 62809 Summary of requirements and tests for products in the scope of IEC 60601-2-66 - Edition 1.0 2019 IEC 0 1007 TR 62829-1 Chemometrics for process analytical technologies - Part 1: General provisions, and methods for univariate statistics and 2019 IEC 0 chemometric processing of data 1008 TR 62839-2 Environmental declaration - Part 2: Optical/copper telecom accessories products specific rules 2019 IEC 0 1009 TR 62878-2-7 Device embedding assembly technology - Part 2-7: Guidelines - Accelerated stress testing of passive embedded circuit 2019 IEC 0 boards 1010 TR 62926 Medical electrical system - Guidelines for safe integration and operation of adaptive external-beam radiotherapy systems 2019 IEC 0 for real-time adaptive radiotherapy 1011 TR 63037 Electrical interface specifications for self ballasted lamps and controlgear in phase-cut dimmed lighting systems - Edition 2019 IEC 0 1.0 1012 TR 63069 Industrial-process measurement, control and automation - Framework for functional safety and security 2019 IEC 0 1013 TR 63074 Safety of machinery - Security aspects related to functional safety of safety-related control systems 2019 IEC 0 1014 TR 63122-1 Smart television - Part 1: Conceptual model for smart television 2019 IEC 0 1015 TR 63122-2 Smart television - Part 2: Framework of integrated service on smart television 2019 IEC 0 1016 TR 63127 Guideline for the system design of HVDC converter stations with line-commutated converters 2019 IEC 0 1017 TR 63176 Process analysis technology systems as part of safety instrumented systems 2019 IEC 0 1018 TR 63183 Guidance on error and warning messages for software used in radiotherapy 2019 IEC 0 1019 TR 63192 Nuclear power plants - Instrumentation and control systems important to safety - Hazard analysis: A review of current 2019 IEC 0 approaches 1020 TR 63194 Guidance on colour coding of optical fibre cables 2019 IEC 0 1021 TR 63201 Low-voltage switchgear and controlgear - Guidance for the development of embedded software 2019 IEC 0 1022 TR 63213 Power measurement applications within electrical distribution networks and electrical installations 2019 IEC 0 1023 TR 63214 Nuclear power plants - Control rooms - Human factors engineering 2019 IEC 0 1024 TR 63216 Low-voltage switchgear and controlgear - Electromagnetic compatibility assessment for switchgear and controlgear and 2019 IEC 0 their assemblies 1025 TR 63225 Incompatibility of connectors for DC-application in photovoltaic systems 2019 IEC 0 1026 TR 63228 Measurement protocols for photovoltaic devices based on organic, dye-sensitized or perovskite materials 2019 IEC 0 1027 TR 63231 Consideration of energy efficiency in wireless power transfer technology 2019 IEC 0 1028 TR 63238-1 Process management for avionics - Electronics design - Part 1: Electrical signal properties, naming conventions and 2019 IEC 0 interface control document (ICD) 1029 TR 63262 Performance of unified power flow controller (UPFC) in electric power systems 2019 IEC 0 1030 TS 60079-42 Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment 2019 IEC 0 1031 TS 60904-1-2 Photovoltaic devices - Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices 2019 IEC 0 1032 TS 61400-3-2 Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines 2019 IEC 0 1033 TS 61400-25-71 Wind energy generation systems - Part 25-71: Communications for monitoring and control of wind power plants - 2019 IEC 0 Configuration description language 1034 TS 61850-2 Communication networks and systems in substations Part 2: Glossary - Edition 1.0 2019 IEC 0 1035 TS 61973 High voltage direct current (HVDC) substation audible noise - Edition 1.0 2019 IEC 0 1036 TS 61980-2 Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for communication between electric 2019 IEC 0 road vehicle (EV) and infrastructure 1037 TS 61980-3 Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless 2019 IEC 0 power transfer systems 1038 TS 61994-5 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - 2019 IEC 0 Glossary - Part 5: Piezoelectric sensors 1039 TS 62257-7-4 Recommendations for renewable energy and hybrid systems for rural electrification - Part 7-4: Generators - Integration of 2019 IEC 0 solar with other forms of power generation within hybrid power systems 1040 TS 62257-9-6 Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-6: Integrated system 2019 IEC 0 Selection of Photovoltaic Individual Electrification Systems (PV-IES) - Edition 1.0 1041 TS 62257-9-7 Renewable energy and hybrid systems for rural electrification - Part 9-7: Recommendations for selection of inverters 2019 IEC 0 1042 TS 62271-304 High-voltage switchgear and controlgear Part 304: Design classes for indoor enclosed switchgear and controlgear for rated 2019 IEC 0 voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions - Edition 1.0 1043 TS 62341-6-5 Organic light emitting diode (OLED) displays - Part 6-5: Measuring methods of dynamic range properties 2019 IEC 0 1044 TS 62565-4-1 Nanomanufacturing - Key control characteristics - Part 4-1: Luminescent nanomaterials - Blank detail specification 2019 IEC 0 1045 TS 62600-20 Marine energy - Wave, tidal, and other water current converters - Part 20: Design and analysis of an Ocean Thermal Energy 2019 IEC 0 Conversion (OTEC) plant - General guidance 1046 TS 62600-40 Marine energy - Wave, tidal and other water current converters - Part 40: Acoustic characterization of marine energy 2019 IEC 0 converters 1047 TS 62600-300 Marine energy - Wave, tidal and other water current converters - Part 300: Electricity producing river energy converters - 2019 IEC 0 Power performance assessment 1048 TS 62600-301 Marine energy - Wave, tidal and other water current converters - Part 301: River energy resource assessment 2019 IEC 0 1049 TS 62686-2 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) 2019 IEC 0 applications - Part 2: General requirements for passive components 1050 TS 62715-5-4 Flexible display devices - Part 5-4: Measuring method of blur in flexible transparent displays 2019 IEC 0 1051 TS 62764-1 Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive 2019 IEC 0 environment with respect to human exposure - Part 1: Low frequency magnetic fields 1052 TS 62871-2 Professional video storage products - Tape-less camera recorder using MXF file format - Encoding guidelines - Part 2: 2019 IEC 0 Mapping MPEG-2 and AVC Streams into MXF 1053 TS 62872-1 Industrial-process measurement, control and automation - Part 1: System interface between industrial facilities and the 2019 IEC 0 smart grid 1054 TS 62977-3-1 Electronic displays - Part 3-1: Evaluation of optical performances - Colour difference based viewing direction dependence 2019 IEC 0 1055 TS 62994 Photovoltaic (PV) modules through the life cycle - Environmental health and safety (EH&S) risk assessment - General 2019 IEC 0 principles and nomenclature 1056 TS 62998-1 Safety of machinery - Safety-related sensors used for the protection of persons 2019 IEC 0 1057 TS 63001 Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors 2019 IEC 0 1058 TS 63019 Photovoltaic power systems (PVPS) - Information model for availability 2019 IEC 0 1059 TS 63042-101 UHV AC transmission systems - Part 101: Voltage regulation and insulation design 2019 IEC 0 1060 TS 63050 Radiation protection instrumentation - Dosemeters for pulsed fields of ionizing radiation 2019 IEC 0 1061 TS 63060 Electric energy supply networks - General aspects and methods for the maintenance of installations and equipment 2019 IEC 0 1062 TS 63070 Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue- 2019 IEC 0 mimicking material and at the radiation surface of a transducer in still air 1063 TS 63081 Ultrasonics - Methods for the characterization of the ultrasonic properties of materials 2019 IEC 0 1064 TS 63157 Photovoltaic systems - Guidelines for effective quality assurance of power conversion equipment 2019 IEC 0 1065 TS 63181-1 LCD multi-screen display terminals - Part 1: Conceptual model 2019 IEC 0 1066 82079-1 Preparation of instructions for use Structuring, content and presentation Part 1: General principles and detailed 2019 IEC 0 requirements - Edition 1.0 1067 2382-36 Information technology - Vocabulary - Part 36: Learning, education and training 2019 IEC 0 1068 7810 Identification cards - Physical characteristics 2019 IEC 0 1069 7816-8 Identification cards - Integrated circuit cards - Part 8: Commands and mechanisms for security operations 2019 IEC 0 1070 9075-15 Information technology database languages - SQL - Part 15: Multi-dimensional arrays (SQL/MDA) 2019 IEC 0 1071 9798-2 IT Security techniques - Entity authentication - Part 2: Mechanisms using authenticated encryption 2019 IEC 0 1072 9798-3 IT Security techniques - Entity authentication - Part 3: Mechanisms using digital signature techniques 2019 IEC 0 1073 10373-7 Cards and security devices for personal identification - Test methods - Part 7: Contactless vicinity objects 2019 IEC 0 1074 10918-7 Information technology - Digital compression and coding of continuous-tone still images - Part 7: Reference software 2019 IEC 0 1075 11179-7 Information technology - Metadata registries (MDR) - Part 7: Metamodel for data set registration 2019 IEC 0 1076 13251 Information technology - Collection of graphical symbols for office equipment 2019 IEC 0 1077 13818-1 Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems 2019 IEC 0 1078 14165-246 Information technology - Fibre channel - Part 246: Backbone - 6 (FC-BB-6) 2019 IEC 0 1079 14492 Information technology - Lossy/lossless coding of bi-level images 2019 IEC 0 1080 14496-3 Information technology - Coding of audio-visual objects - Part 3: Audio 2019 IEC 0 1081 14496-15 Information technology - Coding of audio-visual objects - Part 15: Carriage of network abstraction layer (NAL) unit 2019 IEC 0 structured video in the ISO base media file format 1082 14496-22 Information technology - Coding of audio-visual objects - Part 22: Open Font Format 2019 IEC 0 1083 14496-33 Information technology - Coding of audio-visual objects - Part 33: Internet video coding 2019 IEC 0 1084 63012 Insulating liquids - Unused modified or blended esters for electrotechnical applications 2019 IEC 0 1085 63013 LED packages Long-term luminous and radiant flux maintenance projection 2019 IEC 0 1086 63026 Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (Um = 7,2 kV) up to 2019 IEC 0 60 kV (Um = 72,5 kV) - Test methods and requirements 1087 63033-2 NULL 2019 IEC 0 1088 63033-3 Car multimedia systems and equipment - Drive monitoring system - Part 3: Measurement methods 2019 IEC 0 1089 63044-5-1 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC 2019 IEC 0 requirements, conditions and test set-up - Edition 1.0 1090 63044-5-2 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-2: EMC 2019 IEC 0 requirements for HBES/BACS used in residential, commercial and light-industrial environments - Edition 1.0 1091 63044-5-3 Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 5-3: EMC 2019 IEC 0 requirements for HBES/BACS used in industrial environments - Edition 1.0 1092 63068-1 Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power 2019 IEC 0 devices - Part 1: Classification of defects 1093 63068-2 Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power 2019 IEC 0 devices - Part 2: Test method for defects using optical inspection 1094 63075 Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV - Test methods and 2019 IEC 0 requirements 1095 63077 Good refurbishment practices for medical imaging equipment 2019 IEC 0 1096 63093-4 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores 2019 IEC 0 1097 63093-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores 2019 IEC 0 1098 63093-13 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores 2019 IEC 0 1099 63093-14 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores 2019 IEC 0 1100 63119-1 Information exchange for electric vehicle charging roaming service - Part 1: General 2019 IEC 0 1101 63128 Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear 2019 IEC 0 1102 63135 NULL 2019 IEC 0 1103 63136 Electric dishwashers for commercial use - Test methods for measuring the performance 2019 IEC 0 1104 63137-1 Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods 2019 IEC 0 1105 63138-1 Multi-channel radio frequency connectors - Part 1: Generic specification - General requirements and test methods 2019 IEC 0 1106 63145-20-10 Eyewear display - Part 20-10: Fundamental measurement methods - Optical properties 2019 IEC 0 1107 63145-20-20 Eyewear display - Part 20-20: Fundamental measurement methods - Image quality 2019 IEC 0 1108 63146 LED packages for general lighting - Specification sheet 2019 IEC 0 1109 63202-1 Photovoltaic cells - Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells 2019 IEC 0 1110 80601-2-30 Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of 2019 IEC 0 automated non-invasive sphygmomanometers - Edition 1.1 Consolidated Reprint 1111 80601-2-49 Medical electrical equipment Part 2-49: Particular requirements for the basic safety and essential performance of 2019 IEC 0 multifunction patient monitors - Edition 1.0 1112 80601-2-59 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening 2019 IEC 0 thermographs for human febrile temperature screening - Edition 1.0 1113 81346-2 Industrial systems, installations and equipment and industrial products Structuring principles and reference designations 2019 IEC 0 Part 2: Classification of objects and codes for classes - Edition 1.0 1114 ASTM 62885-6 NULL 2019 IEC 0 1115 CISPR 11 Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods of 2019 IEC 0 measurement - Edition 6.1 Consolidated Reprint 1116 CISPR 16-1-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and 2019 IEC 0 immunity measuring apparatus Antennas and test sites for radiated disturbance measurements - Edition 3.2; Consolidated Reprint 1117 IEC-IEEE NULL 2019 IEC 0 60214-2 1118 IEEE 60214-2 NULL 2019 IEC 0 1119 60079-15 Explosive atmospheres Part 15: Equipment protection by type of protection "n" - Edition 4.0 2019 IEC 0 1120 60079-19 Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation - Edition 3.1 Consolidated Reprint 2019 IEC 0 1121 60086-4 Primary batteries Part 4: Safety of lithium batteries - Edition 4.0 2019 IEC 0 1122 60092-201 Electrical Installations in Ships - Part 201: System Design - General - Edition 4.0 2019 IEC 0 1123 60092-302-2 Electrical installations in ships - Part 302-2: Low voltage switchgear and controlgear assemblies - Marine power 2019 IEC 0 1124 60099-6 Surge Arresters - Part 6: Surge Arresters Containing Both Series and Parallel Gapped Structures - Rated 52 kV and Less - 2019 IEC 0 Edition 1.0 1125 60118-9 Hearing Aids Part 9: Methods of Measurement of Characteristics of Hearing Aids with Bone Vibrator Output - Edition 1.0 2019 IEC 0 1126 60122-4 Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors 2019 IEC 0 1127 60193 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Model Acceptance Tests - Edition 2.0 2019 IEC 0 1128 60204-11 Safety of Machinery - Electrical Equipment of Machines - Part 11: Requirements for HV Equipment for Voltages Above 1 2019 IEC 0 000 V a.c. or 1 500 V d.c. and Not Exceeding 36 kV - Edition 1.0 1129 60255-181 Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection 2019 IEC 0 1130 60276 Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip-Rings - Edition 1.0 2019 IEC 0 1131 60286-3 Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes - 2019 IEC 0 Edition 5.0 1132 60317-0-8 Specifications for particular types of winding wires Part 0-8: General requirements Polyester glass fibre wound, resin or 2019 IEC 0 varnish impregnated or not impregnated, bare or enamelled rectangular copper wire - Edition 1.0 1133 60317-27-3 Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire 2019 IEC 0 1134 60317-80 Specifications for particular types of winding wires - Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 2019 IEC 0 120, with a bonding layer 1135 60331-1 Tests for electric cables under fire conditions Circuit integrity Part 1: Test method for fire with shock at a temperature of 2019 IEC 0 at least 830 degrees C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm 1136 60335-2-111 Household and similar electrical appliances Safety Part 2-111: Particular requirements for electric ondol mattress with a 2019 IEC 0 non-flexible heated part - Edition 1.0 1137 60364-8-1 Low-voltage electrical installations Part 8-1: Energy efficiency - Edition 1.0 2019 IEC 0 1138 60384-11 Fixed capacitors for use in electronic equipment Part 11: Sectional specification Fixed polyethylene-terephthalate film 2019 IEC 0 dielectric metal foil d.c. capacitors - Edition 3.0 1139 60384-17 Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed metallized polypropylene film 2019 IEC 0 dielectric a.c. and pulse capacitors - Edition 2.0 1140 60384-21 Fixed capacitors for use in electronic equipment Part 21: Sectional specification Fixed surface mount multilayer capacitors 2019 IEC 0 of ceramic dielectric, Class 1 - Edition 2.0 1141 60384-22 Fixed capacitors for use in electronic equipment Part 22: Sectional specification Fixed surface mount multilayer capacitors 2019 IEC 0 of ceramic dielectric, Class 2 - Edition 2.0 1142 60404-7 Magnetic Materials Part 7: Method of Measurement of the Coercivity of Magnetic Materials in an Open Magnetic Circuit - 2019 IEC 0 Edition 1.0 1143 14543-5-12 Information technology - Home electronic system (HES) architecture - Part 5-12: Intelligent grouping and resource sharing 2019 IEC 0 for HES Class 2 and Class 3 - Remote access test and verification 1144 14543-5-101 Information technology - Home electronic system (HES) architecture - Part 5-101: Intelligent grouping and resource 2019 IEC 0 sharing for HES Class 2 and Class 3 - Remote media access profile 1145 14651 Information technology - International string ordering and comparison - Method for comparing character strings and 2019 IEC 0 description of the common template tailorable ordering 1146 14763-2 Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation 2019 IEC 0 1147 14776-224 Information technology - Small computer system interface (SCSI) - Part 224: Fibre Channel Protocol for SCSI, fourth 2019 IEC 0 version (FCP-4) 1148 14776-415 Information technology - Small Computer System Interface (SCSI) - Part 415: SCSI Architecture Model - 5 (SAM-5) 2019 IEC 0 1149 14776-481 Information technology - Small computer system interface (SCSI) - Part 481: Security features for SCSI commands (SFSC) 2019 IEC 0 1150 15067-3-3 Information technology - Home electronic system (HES) application model - Part 3-3: Model of a system of interacting 2019 IEC 0 energy management agents (EMAs) for demand-response energy management 1151 15434 Information technology - Automatic identification and data capture techniques - Syntax for high-capacity ADC media 2019 IEC 0 1152 15444-1 Information technology - JPEG 2000 image coding system - Part 1: Core coding system 2019 IEC 0 1153 15444-15 Information technology - JPEG 2000 image coding system - Part 15: High-Throughput JPEG 2000 2019 IEC 0 1154 15444-16 Information technology - JPEG 2000 image coding system - Part 16: Encapsulation of JPEG 2000 Images into ISO/IEC 2019 IEC 0 23008-12 1155 15693-2 Cards and security devices for personal identification - Contactless vicinity objects - Part 2: Air interface and initialization 2019 IEC 0 1156 15693-3 Cards and security devices for personal identification - Contactless vicinity objects - Part 3: Anticollision and transmission 2019 IEC 0 protocol 1157 15909-1 Systems and software engineering - High-level Petri nets - Part 1: Concepts, definitions and graphical notation 2019 IEC 0 1158 15938-15 Information technology - Multimedia content description interface - Part 15: Compact descriptors for video analysis 2019 IEC 0 1159 15961-2 Information technology - Data protocol for radio frequency identification (RFID) for item management - Part 2: 2019 IEC 0 Registration of RFID data constructs 1160 15961-3 Information technology - Data protocol for radio frequency identification (RFID) for item management - Part 3: RFID data 2019 IEC 0 constructs 1161 17029 Conformity assessment - General principles and requirements for validation and verification bodies 2019 IEC 0 1162 18013-4 Personal identification - ISO-compliant driving licence - Part 4: Test methods 2019 IEC 0 1163 18033-6 IT Security techniques - Encryption algorithms - Part 6: Homomorphic encryption 2019 IEC 0 1164 18039 Information technology - Computer graphics, image processing and environmental data representation - Mixed and 2019 IEC 0 augmented reality (MAR) reference model 1165 18040 Information technology - Computer graphics, image processing and environmental data representation - Live actor and 2019 IEC 0 entity representation in mixed and augmented reality (MAR) 1166 18520 Information technology - Computer graphics, image processing and environmental data representation - Benchmarking of 2019 IEC 0 vision-based spatial registration and tracking methods for mixed and augmented reality (MAR) 1167 19086-4 Cloud computing - Service level agreement (SLA) framework - Part 4: Components of security and of protection of PII 2019 IEC 0 1168 19479 Information technology for learning, education, and training - Learner mobility achievement information (LMAI) 2019 IEC 0 1169 19515 Information technology - Object Management Group Automated Function Points (AFP), 1.0 2019 IEC 0 1170 19566-5 Information technologies - JPEG systems - Part 5: JPEG universal metadata box format (JUMBF) 2019 IEC 0 1171 19566-6 Information technologies - JPEG systems - Part 6: JPEG 360 2019 IEC 0 1172 19788-7 Information technology - Learning, education and training - Metadata for learning resources - Part 7: Bindings 2019 IEC 0 1173 19823-21 Information technology - Conformance test methods for security service crypto suites - Part 21: Crypto suite SIMON 2019 IEC 0 1174 19823-22 Information technology - Conformance test methods for security service crypto suites - Part 22: Crypto suite SPECK 2019 IEC 0 1175 20000-2 Information technology - Service management - Part 2: Guidance on the application of service management systems 2019 IEC 0 1176 20000-3 Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 2019 IEC 0 1177 20071-11 Information technology - User interface component accessibility - Part 11: Guidance on text alternatives for images 2019 IEC 0 1178 20085-1 IT Security techniques - Test tool requirements and test tool calibration methods for use in testing non-invasive attack 2019 IEC 0 mitigation techniques in cryptographic modules - Part 1: Test tools and techniques 1179 20543 Information technology - Security techniques - Test and analysis methods for random bit generators within ISO/IEC 19790 2019 IEC 0 and ISO/IEC 15408 1180 20546 Information technology - Big data - Overview and vocabulary 2019 IEC 0 1181 20933 Information technology - Distributed application platforms and services (DAPS) - Framework for distributed real-time 2019 IEC 0 access systems 1182 21000-22 Information technology - Multimedia framework (MPEG-21) - Part 22: User Description 2019 IEC 0 1183 21122-1 Information technology - JPEG XS low-latency lightweight image coding system - Part 1: Core coding system 2019 IEC 0 1184 21122-2 Information technology - JPEG XS low-latency lightweight image coding system - Part 2: Profiles and buffer models 2019 IEC 0 1185 21122-3 Information technology - JPEG XS low-latency lightweight image coding system - Part 3: Transport and container formats 2019 IEC 0 1186 21228 Information technology - Telecommunications and information exchange between systems - Coexistence mechanism for 2019 IEC 0 broadband powerline communication technologies 1187 21823-1 Internet of Things (IoT) - Interoperability for IoT systems - Part 1: Framework 2019 IEC 0 1188 22243 Information technology - Radio frequency identification for item management - Methods for localization of RFID tags 2019 IEC 0 1189 22505 Information technology - Method for the determination of ink cartridge yield for monochrome inkjet printers and multi- 2019 IEC 0 function devices that contain inkjet printer components 1190 22602 Information technology - Learning, education and training - Competency models expressed in MLR 2019 IEC 0 1191 23000-21 Information technology - Multimedia application format (MPEG-A) - Part 21: Visual identity management application 2019 IEC 0 format 1192 23000-22 Information technology - Multimedia application format (MPEG-A) - Part 22: Multi-image application format (MIAF) 2019 IEC 0 1193 23001-11 Information technology - MPEG systems technologies - Part 11: Energy-efficient media consumption (green metadata) 2019 IEC 0 1194 23001-13 Information technology - MPEG systems technologies - Part 13: Media orchestration 2019 IEC 0 1195 23001-14 Information technology - MPEG systems technologies - Part 14: Partial file format 2019 IEC 0 1196 23001-15 Information technology - MPEG systems technologies - Part 15: Carriage of web resources in ISOBMFF 2019 IEC 0 1197 23005-3 Information technology - Media context and control - Part 3: Sensory information 2019 IEC 0 1198 23005-5 Information technology - Media context and control - Part 5: Data formats for interaction devices 2019 IEC 0 1199 23005-6 Information technology - Media context and control - Part 6: Common types and tool 2019 IEC 0 1200 23005-7 Information technology - Media context and control - Part 7: Conformance and reference software 2019 IEC 0 1201 23008-3 Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 3: 3D audio 2019 IEC 0 1202 23008-9 Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 9: 3D Audio 2019 IEC 0 conformance testing 1203 23009-1 Information technology - Dynamic adaptive streaming over HTTP (DASH) - Part 1: Media presentation description and 2019 IEC 0 segment formats 1204 23090-2 Information technology - Coded representation of immersive media - Part 2: Omnidirectional media format 2019 IEC 0 1205 23091-2 Information technology - Coding-independent code points - Part 2: Video 2019 IEC 0 1206 23092-1 Information technology - Genomic information representation - Part 1: Transport and storage of genomic information 2019 IEC 0 1207 23092-2 Information technology - Genomic information representation - Part 2: Coding of genomic information 2019 IEC 0 1208 23093-2 Information technology - Internet of media things - Part 2: Discovery and communication API 2019 IEC 0 1209 23093-3 Information technology - Internet of media things - Part 3: Media data formats and APIs 2019 IEC 0 1210 23681 Information technology - Self-contained Information Retention Format (SIRF) Specification 2019 IEC 0 1211 24091 Information technology - Power efficiency measurement specification for data center storage 2019 IEC 0 1212 24760-1 IT Security and Privacy - A framework for identity management - Part 1: Terminology and concepts 2019 IEC 0 1213 24761 Information technology - Security techniques - Authentication context for biometrics 2019 IEC 0 1214 24770-5 Information technology - Real-time locating system (RTLS) device performance test methods - Part 5: Test methods for 2019 IEC 0 chirp spread spectrum (CSS) air interface 1215 24773-1 Software and systems engineering - Certification of software and systems engineering professionals - Part 1: General 2019 IEC 0 requirements 1216 25020 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality 2019 IEC 0 measurement framework 1217 25030 Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Quality 2019 IEC 0 requirements framework 1218 26552 Software and systems engineering - Tools and methods for product line architecture design 2019 IEC 0 1219 26560 Software and systems engineering - Tools and methods for product line product management 2019 IEC 0 1220 26561 Software and systems engineering - Methods and tools for product line technical probe 2019 IEC 0 1221 26562 Software and systems engineering - Methods and tools for product line transition management 2019 IEC 0 1222 27018 Information technology - Security techniques - Code of practice for protection of personally identifiable information (PII) 2019 IEC 0 in public clouds acting as PII processors 1223 27050-1 Information technology - Electronic discovery - Part 1: Overview and concepts 2019 IEC 0 1224 27102 Information security management - Guidelines for cyber-insurance 2019 IEC 0 1225 27701 Security techniques - Extension to ISO/IEC 27001 and ISO/IEC 27002 for privacy information management - 2019 IEC 0 Requirements and guidelines 1226 29109-5 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 2019 IEC 0 19794 - Part 5: Face image data 1227 29167-19 Information technology - Automatic identification and data capture techniques - Part 19: Crypto suite RAMON security 2019 IEC 0 services for air interface communications 1228 29192-2 Information security - Lightweight cryptography - Part 2: Block ciphers 2019 IEC 0 1229 29192-6 Information technology - Lightweight cryptography - Part 6: Message authentication codes (MACs) 2019 IEC 0 1230 29192-7 Information security - Lightweight cryptography - Part 7: Broadcast authentication protocols 2019 IEC 0 1231 30071-1 Information technology - Development of user interface accessibility - Part 1: Code of practice for creating accessible ICT 2019 IEC 0 products and services 1232 30106-4 Information technology - Object oriented BioAPI - Part 4: C++ implementation 2019 IEC 0 1233 30111 Information technology - Security techniques - Vulnerability handling processes 2019 IEC 0 1234 30113-5 Information technology - User interface - Gesture-based interfaces across devices and methods - Part 5: Gesture Interface 2019 IEC 0 Markup Language (GIML) 1235 30113-12 Information technology - User interfaces - Gesture-based interfaces across devices and methods - Part 12: Multi-point 2019 IEC 0 gestures for common system actions 1236 30137-1 Information technology - Use of biometrics in video surveillance systems - Part 1: System design and specification 2019 IEC 0 1237 30146 Information technology - Smart city ICT indicators 2019 IEC 0 1238 33020 Information technology - Process assessment - Process measurement framework for assessment of process capability 2019 IEC 0 1239 39794-1 Information technology - Extensible biometric data interchange formats - Part 1: Framework 2019 IEC 0 1240 39794-4 Information technology - Extensible biometric data interchange formats - Part 4: Finger image data 2019 IEC 0 1241 39794-5 Information technology - Extensible biometric data interchange formats - Part 5: Face image data 2019 IEC 0 1242 GUIDE 59 ISO and IEC recommended practices for standardization by national bodies 2019 IEC 0 1243 GUIDE 63 Guide to the development and inclusion of aspects of safety in International Standards for medical devices 2019 IEC 0 1244 IEEE 8802-1CB Information technology - Telecommunications and information exchange between systems - Local and metropolitan area 2019 IEC 0 networks - Specific requirements - Part 1CB: Frame replicaton and elimination for reliability 1245 IEEE 8802- Telecommunications and information exchange between information technology systems - Requirements for local and 2019 IEC 0 1CM metropolitan area networks - Part 1CM: Time-sensitive networking for fronthaul 1246 IEEE 15026-1 Systems and software engineering - Systems and software assurance - Part 1: Concepts and vocabulary 2019 IEC 0 1247 IEEE 15289 Systems and software engineering - Content of life-cycle information items (documentation) 2019 IEC 0 1248 IEEE 16326 Systems and software engineering - Life cycle processes - Project management 2019 IEC 0 1249 IEEE 21839 Systems and software engineering - System of systems (SoS) considerations in life cycle stages of a system 2019 IEC 0 1250 IEEE 21840 Systems and software engineering - Guidelines for the utilization of ISO/IEC/IEEE 15288 in the context of system of 2019 IEC 0 systems (SoS) 1251 IEEE 21841 Systems and software engineering - Taxonomy of systems of systems 2019 IEC 0 1252 IEEE 24748-7 Systems and software engineering - Life cycle management - Part 7: Application of systems engineering on defense 2019 IEC 0 programs 1253 IEEE 24748-8 Systems and software engineering - Life cycle management - Part 8: Technical reviews and audits on defense programs 2019 IEC 0 1254 IEEE 41062 Software engineering - Recommended practice for software acquisition 2019 IEC 0 1255 IEEE 42020 Software, systems and enterprise - Architecture processes 2019 IEC 0 1256 IEEE 42030 Software, systems and enterprise - Architecture evaluation framework 2019 IEC 0 1257 TR 11179-2 Information technology - Metadata registries (MDR) - Part 2: Classification 2019 IEC 0 1258 TR 11801-9907 Information technology - Generic cabling for customer premises - Part 9907: Specifications for direct attach cabling 2019 IEC 0 1259 TR 16351 Information technology - Systems and software engineering - Application management guidance on the relationship 2019 IEC 0 between ISO/IEC 16350:2015 and Application Service Library_ 1260 TR 17032 Conformity assessment - Guidelines and examples of a scheme for the certification of processes 2019 IEC 0 1261 TR 19075-8 Information technology database languages - SQL technical reports - Part 8: Multi-dimensional arrays (SQL/MDA) 2019 IEC 0 1262 TR 19583-1 Information technology - Concepts and usage of metadata - Part 1: Metadata concepts 2019 IEC 0 1263 TR 20000-7 Information technology - Service management - Part 7: Guidance on the integration and correlation of ISO/IEC 20000- 2019 IEC 0 1:2018 to ISO 9001:2015 and ISO/IEC 27001:2013 1264 TR 22678 Information technology - Cloud computing - Guidance for policy development 2019 IEC 0 1265 TR 23050 Information technology - Data centres - Impact on data centre resource metrics of electrical energy storage and export 2019 IEC 0 1266 TR 23091-4 Information technology - Coding-independent code points - Part 4: Usage of video signal type code points 2019 IEC 0 1267 TR 24772-1 Programming languages - Guidance to avoiding vulnerabilities in programming languages - Part 1: Language-independent 2019 IEC 0 guidance 1268 TR 27550 Information technology - Security techniques - Privacy engineering for system life cycle processes 2019 IEC 0 1269 TR 29110-5-6-3 Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs) - Part 5-6-3: Systems engineering: 2019 IEC 0 Management and engineering guide: Generic profile group: Intermediate profile 1270 TR 30105-7 Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 7: 2019 IEC 0 Exemplar for maturity assessment 1271 TR 30148 Internet of things (IoT) - Application of sensor network for wireless gas meters 2019 IEC 0 1272 TR 33015 Information technology - Process assessment - Guidance for process risk determination 2019 IEC 0 1273 TR 33018 Information technology - Process assessment - Guidance for assessor competency 2019 IEC 0 1274 TS 11179-30 Information technology - Metadata registries (MDR) - Part 30: Basic attributes of metadata 2019 IEC 0 1275 TS 17021-8 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 8: 2019 IEC 0 Competence requirements for auditing and certification of management systems for sustainable development in communities 1276 TS 19795-9 Information technology - Biometric performance testing and reporting - Part 9: Testing on mobile devices 2019 IEC 0 1277 TS 20748-4 Information technology for learning, education and training - Learning analytics interoperability - Part 4: Privacy and data 2019 IEC 0 protection policies 1278 TS 24751-4 Information technology for learning, education and training - AccessForAll framework for individualized accessibility - 2019 IEC 0 Part 4: Registry server API 1279 TS 27008 Information technology - Security techniques - Guidelines for the assessment of information security controls 2019 IEC 0 1280 TS 33053 Information technology - Process assessment - Process Reference Model (PRM) for quality management 2019 IEC 0 1281 63006 Wireless power transfer (WPT) - Glossary of terms 2019 IEC 0 1282 63009 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 20 kHz to 2019 IEC 0 500 kHz 1283 63011-3 NULL 2018 IEC 0 1284 S301:2018 Standard For Signal Receiving Centres Configurations And Operations 2018 IEC 1285 TS 17021-10 NULL 2018 IEC 0 1286 TS 17021-11 NULL 2018 IEC 0 1287 TR 23186 NULL 2018 IEC 0 1288 IEEE 24748-2 NULL 2018 IEC 0 1289 23008-6 NULL 2018 IEC 0 1290 17021-2 NULL 2018 IEC 0 1291 17021-3 NULL 2018 IEC 0 1292 60479-1 NULL 2018 IEC 0 1293 IEEE 60255- NULL 2018 IEC 0 118-1 1294 63000 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous 2018 IEC 0 substances - Edition 1.0 1295 60869-1 Fibre optic interconecting devices and passive components Fibre optic passive power control devices Part 1: Generic 2018 IEC 0 specification - Edition 4.0 1296 62746-10-1 NULL 2018 IEC 0 1297 60079-0 Explosive atmospheres Part 0: Equipment General requirements - Edition 6.0; Incorporates Corrigendum 1: 11/2012 and 2018 IEC 0 Corrigendum 2: 12/2013; Includes Interpretation 1: 11/2013 and Interpretation 2: 10/2014 1298 62106-4 Radio data system (RDS) VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 4: 2018 IEC 0 Registered code tables - Edition 1.0 1299 60050-891 AMENDMENT 1 International Electrotechnical Vocabulary (IEV) Part 891: Electrobiology - Edition 1.0 2018 IEC 0 AMD 1 1300 61238-1-3 Compression and mechanical connectors for power cables Part 1-3: Test methods and requirements for compression and 2018 IEC 0 mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conducto 1301 60507 CORR 1 ARTIFICIAL POLLUTION TESTS ON HIGHVOLTAGE CERAMIC AND GLASS INSULATORS TO BE USED ON 2018 IEC 0 A.C. SYSTEMS - Edition 3.0 1302 60721-2-4 Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and 2018 IEC 0 temperature - Edition 2.0 1303 62933-1 Electrical energy storage (EES) systems Part 1: Vocabulary - Edition 1.0 2018 IEC 0 1304 60076-16 Power transformers Part 16: Transformers for wind turbine applications - Edition 2.0 2018 IEC 0 (REDLINE + STAND 1305 61010-2-061 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular 2018 IEC 0 requirements for laboratory atomic spectrometers with thermal atomization and ionization - Edition 4.0 1306 61058-2-4 Switches for appliances Part 2-4: Particular requirements for independently mounted switches - Edition 2.0 2018 IEC 0 (REDLINE + STAN 1307 PAS 63166 Zhaga interface specification book 1 and book 7 - Edition 1.0 2018 IEC 0 1308 60335-2-40 Household and similar electrical appliances Safety Part 2-40: Particular requirements for electrical heat pumps, air- 2018 IEC 0 conditioners and dehumidifiers - Edition 6.0 1309 60071-2 Insulation co-ordination Part 2: Application guidelines - Edition 4.0 2018 IEC 0 1310 63093-8 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores - Edition 1.0 2018 IEC 0 1311 61189-2-630 Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 2-630: Test 2018 IEC 0 methods for materials for interconnection structures Moisture absorption after pressure vessel conditioning - Edition 1.0 1312 60204-11 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V 2018 IEC 0 (REDLINE + AC or 1 500 V DC and not exceeding 36 kV - Edition 2.0 STAND 1313 60705 Household microwave ovens Methods for measuring performance - Edition 4.2 ; Consolidated Reprint 2018 IEC 0 1314 60050-726 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) Part 726: Transmission lines and waveguides - Edition 2018 IEC 0 AMD 3 1.0 1315 60268-3 Sound system equipment Part 3: Amplifiers - Edition 5.0 2018 IEC 0 1316 CISPR 16-4-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and 2018 IEC 0 limit modelling - Measurement instrumentation uncertainty - Edition 2.2; Consolidated Reprint 1317 61156-1-4 Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Assessment of conductor heating in 2018 IEC 0 bundled cables due to the deployment of remote powering - Edition 1.0 1318 61058-2-1 Switches for appliances Part 2-1: Particular requirements for cord switches - Edition 3.0 2018 IEC 0 1319 62053-23 Electricity metering equipment (a.c.) Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3) - 2018 IEC 0 CORR 1 Edition 1.0 1320 62945 Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security- 2018 IEC 0 screening systems - Edition 1.0 1321 62923-1 Maritime navigation and radiocommunication equipment and systems Bridge alert management Part 1: Operational and 2018 IEC 0 performance requirements, methods of testing and required test results - Edition 1.0 1322 60512-15-2 Connectors for electrical and electronic equipment Tests and measurements Part 15-2: Connector tests (mechanical) Test 2018 IEC 0 15b: Insert retention in housing (axial) - Edition 2.0 1323 60364-7-711 Low voltage electrical installations Part 7-711: Requirements for special installations or locations Exhibitions, shows and 2018 IEC 0 (REDLINE + stands - Edition 2.0 ST 1324 61993-2 Maritime navigation and radiocommunication equipment and systems Automatic identification systems (AIS) Part 2: Class 2018 IEC 0 (REDLINE + A shipborne equipment of the automatic identification system (AIS) Operational and performance requirements, methods STANDA of test and required 1325 62715-6-1 Flexible display devices - Part 6-1: Mechanical test methods - Deformation tests - Edition 2.0 2018 IEC 0 1326 62055-41 Electricity metering - Payment systems - Part 41: Standard transfer specification (STS) - Application layer protocol for one- 2018 IEC 0 way token carrier systems - Edition 3.0 1327 62820-3-2 Building intercom systems Part 3-2: Application guidelines Advanced security building intercom systems (ASBIS) - 2018 IEC 0 Edition 1.0 1328 62368-1 Audio/video, information and communication technology equipment Part 1: Safety requirements - Edition 3.0 2018 IEC 0 1329 60794-4 Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines - Edition 2.0 2018 IEC 0 (REDLINE + STANDA 1330 62888-2 Railway applications - Energy measurement on board trains - Part 2: Energy measurement - Edition 1.0 2018 IEC 0 1331 60376 Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in 2018 IEC 0 electrical equipment - Edition 3.0 1332 62106-6 Radio data system (RDS) VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 6: 2018 IEC 0 Compilation of technical specifications for Open Data Applications in the public domain - Edition 1.0 1333 61784-5-12 Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 - 2018 IEC 0 Edition 2.0 1334 62881 Cause and effect matrix - Edition 1.0 2018 IEC 0 1335 60238 CORR 1 Edison screw lampholders - Edition 9.0 2018 IEC 0 1336 TS 62738 Ground-mounted photovoltaic power plants Design guidelines and recommendations - Edition 1.0 2018 IEC 0 1337 61804-2 Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB 2018 IEC 0 concept - Edition 3.0 1338 60068-3-6 Environmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of 2018 IEC 0 (REDLINE + temperature/humidity chambers - Edition 2.0 STAN 1339 60754-3 Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content 2018 IEC 0 by ion chromatography - Edition 1.0 1340 62275 Cable management systems Cable ties for electrical installations - Edition 3.0 2018 IEC 0 1341 62899-303-1 Printed electronics Part 303-1: Equipment Roll-to-roll printing Mechanical dimensions - Edition 1.0 2018 IEC 0 1342 62442-3 Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method 2018 IEC 0 of measurement to determine the efficiency of controlgear - Edition 2.0 1343 61196-6-4 Coaxial communication cables Part 6-4: Detail specification for 75-7 type CATV drop cables - Edition 1.0 2018 IEC 0 1344 60332-3-23 Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically- 2018 IEC 0 mounted bunched wires or cables - Category B - Edition 2.0 1345 80601-2-49 Medical electrical equipment Part 2-49: Particular requirements for the basic safety and essential performance of 2018 IEC 0 multifunction patient monitors - Edition 1.0 1346 PAS 60512-27- Connectors for electrical and electronic equipment Tests and measurements Part 27-200: Additional specifications for 2018 IEC 0 200 signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors Tests 27a to 27g - Edition 1.0 1347 60335-2-5 Household and similar electrical appliances Safety Part 2-5: Particular requirements for dishwashers - Edition 6.1; 2018 IEC 0 Consolidated Version 1348 62862-3-2 Solar thermal electric plants Part 3-2: Systems and components General requirements and test methods for large-size 2018 IEC 0 parabolic-trough collectors - Edition 1.0 1349 62153-4-9 Metallic communication cable test methods Part 4-9: Electromagnetic compatibility (EMC) Coupling attenuation of 2018 IEC 0 screened balanced cables, triaxial method - Edition 2.0 1350 62386-217 Digital addressable lighting interface Part 217: Particular requirements for control gear Thermal gear protection (device 2018 IEC 0 type 16) - Edition 1.0 1351 61970-456 Energy management system application program interface (EMS-API) Part 456: Solved power system state profiles - 2018 IEC 0 Edition 2.0 1352 PAS 63178 Smart manufacturing service platform Service-oriented integration requirements of the manufacturing resource/capability - 2018 IEC 0 Edition 1.0 1353 60601-2-54 Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray 2018 IEC 0 equipment for radiography and radioscopy - Edition 1.2; Consolidated Reprint 1354 61810-1 CORR ELECTROMECHANICAL ELEMENTARY RELAYS - Part 1: General and safety requirements CORRIGENDUM 2 - 2018 IEC 0 2 Edition 4.0 1355 61918 Industrial communication networks Installation of communication networks in industrial premises - Edition 4.0 2018 IEC 0 1356 60947-4-1 Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters Electromechanical contactors and motor- 2018 IEC 0 starters - Edition 4.0 1357 62106-5 Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 5: 2018 IEC 0 Marking of RDS receiver devices - Edition 1.0 1358 60050-161 AMENDMENT 8 International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility - Edition 1.0 2018 IEC 0 AMD 8 1359 61265 Electroacoustics - Instruments for Measurement of Aircraft Noise - Performance Requirements for Systems to Measure 2018 IEC 0 One-Third-Octave Band Sound Pressure Levels in Noise Certification of Transport-Category Aeroplanes - Edition 2.0 1360 60721-2-7 Classification of environmental conditions Part 2-7: Environmental conditions appearing in nature Fauna and flora - Edition 2018 IEC 0 2.0 1361 60749-13 Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere - Edition 2.0 2018 IEC 0 1362 TS 62257-8-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 8-1: Selection of batteries and 2018 IEC 0 battery management systems for stand-alone electrification systems Specific case of automotive flooded lead-acid batteries available in 1363 60076-16 Power transformers Part 16: Transformers for wind turbine applications - Edition 2.0 2018 IEC 0 1364 61850-6 Communication networks and systems for power utility automation Part 6: Configuration description language for 2018 IEC 0 communication in power utility automation systems related to IEDs - Edition 2.1; Consolidated Reprint 1365 60335-2-86 Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines - 2018 IEC 0 (REDLINE + Edition 3.0 STA 1366 61058-2-4 Switches for appliances Part 2-4: Particular requirements for independently mounted switches - Edition 2.0 2018 IEC 0 1367 60744 Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems 2018 IEC 0 performing category A functions: Characteristics and test methods - Edition 2.0 1368 60730-2-9 Automatic electrical controls Part 2-9: Particular requirements for temperature sensing control - Edition 4.1; Consolidated 2018 IEC 0 Version 1369 61788-23 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors - 2018 IEC 0 Edition 1.0 1370 61853-4 Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles - Edition 1.0; 2018 IEC 0 Includes Access to Additional Content 1371 60204-11 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V 2018 IEC 0 AC or 1 500 V DC and not exceeding 36 kV - Edition 2.0 1372 TS 60076-23 Power transformers - Part 23: DC magnetic bias suppression devices - Edition 1.0 2018 IEC 0 1373 60230 Impulse Tests on Cables and Their Accessories - Edition 2.0 2018 IEC 0 1374 60050-731 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) Part 731: Optical fibre communication - Edition 1.0 2018 IEC 0 AMD 3 1375 60286-5 Packaging of components for automatic handling Part 5: Matrix trays - Edition 3.0 2018 IEC 0 (REDLINE + STANDA 1376 63047 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement - 2018 IEC 0 Edition 1.0 1377 61788-24 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room 2018 IEC 0 temperature of Ag-sheathed Bi-2223 superconducting wires - Edition 1.0 1378 62053-24 ELECTRICITY METERING EQUIPMENT (A.C.) PARTICULAR REQUIREMENTS Part 24: Static meters for reactive 2018 IEC 0 CORR 1 energy at fundamental frequency (classes 0,5 S, 1 S and 1) - Edition 1.0 1379 62923-2 Maritime navigation and radiocommunication equipment and systems Bridge alert management Part 2: Alert and cluster 2018 IEC 0 identifiers and other additional features - Edition 1.0 1380 60749-26 Semiconductor devices Mechanical and climatic test methods Part 26: Electrostatic discharge (ESD) sensitivity testing 2018 IEC 0 Human body model (HBM) - Edition 4.0 1381 62684 Interoperability specifications of common external power supplies (EPS) for use with data-enabled mobile telephones - 2018 IEC 0 (REDLINE + Edition 2.0 STANDARD 1382 60364-7-711 Low voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows 2018 IEC 0 and stands - Edition 2.0 1383 62751-1 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 1: General 2018 IEC 0 requirements - Edition 1.1; Consolidated Reprint 1384 61191-1 Printed board assemblies Part 1: Generic specification Requirements for soldered electrical and electronic assemblies using 2018 IEC 0 (REDLINE + surface mount and related assembly technologies - Edition 3.0 STANDA 1385 60617 Graphical symbols for diagrams (DATABASE SNAPSHOT) 2018 IEC 0 DATABASE SNAPSHOTS 1386 TR 61340-5-2 Electrostatics Part 5-2: Protection of electronic devices from electrostatic phenomena User guide - Edition 2.0 2018 IEC 0 (REDLINE + S 1387 TR 62905 Exposure assessment methods for wireless power transfer systems - Edition 1.0 2018 IEC 0 1388 62680-1-2 Universal serial bus interfaces for data and power Part 1-2: Common components USB Power Delivery specification - 2018 IEC 0 Edition 3.0 1389 61290-4-3 Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power 2018 IEC 0 control - Edition 2.0 1390 60794-4 Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines - Edition 2.0 2018 IEC 0 1391 62888-3 Railway applications Energy measurement on board trains Part 3: Data handling - Edition 1.0 2018 IEC 0 1392 62680-1-3 Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB 2018 IEC 0 Type-CTM cable and connector specification - Edition 3.0 1393 TR 62672 Reliability and availability evaluation of HVDC systems - Edition 1.0 2018 IEC 0 1394 61784-5-18 Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 - 2018 IEC 0 Edition 2.0 1395 62631-3-11 Dielectric and resistive properties of solid insulating materials Part 3-11: Determination of resistive properties (DC 2018 IEC 0 methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials - Edition 1.0 1396 60721-3-1 Classification of environmental conditions Part 3-1: Classification of groups of environmental parameters and their 2018 IEC 0 (REDLINE + severities Storage - Edition 3.0 STAN 1397 60335-2-21 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters - Edition 2018 IEC 0 6.1; Consolidated Reprint 1398 60068-3-6 Environmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of 2018 IEC 0 temperature/humidity chambers - Edition 2.0 1399 61753-1 Fibre optic interconnecting devices and passive components Performance standard Part 1: General and guidance - Edition 2018 IEC 0 2.0 1400 62776 INT 1 Double-capped LED lamps designed to retrofit linear fluorescent lamps Safety specifications - Edition 1.0 2018 IEC 0 1401 62969-3 Semiconductor devices Semiconductor interface for automotive vehicles Part 3: Shock driven piezoelectric energy 2018 IEC 0 harvesting for automotive vehicle sensors - Edition 1.0 1402 62325-301 Framework for energy market communications Part 301: Common information model (CIM) extensions for markets - 2018 IEC 0 Edition 2.0 1403 60317-73 Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide 2018 IEC 0 enamelled rectangular aluminium wire, class 200 - Edition 1.0 1404 61340-4-5 Electrostatics Part 4-5: Standard test methods for specific applications Methods for characterizing the electrostatic 2018 IEC 0 (REDLINE + protection of footwear and flooring in combination with a person - Edition 2.0 STAN 1405 60332-3-24 Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically- 2018 IEC 0 (REDLINE + mounted bunched wires or cables - Category C - Edition 2.0 STA 1406 TS 62989 Primary optics for concentrator photovoltaic systems - Edition 1.0 2018 IEC 0 1407 TR 63139 Explanation of the mathematical addition of working voltages, insulation between circuits and use of PELV in TC 34 2018 IEC 0 standards - Edition 1.0 1408 62236-1 Railway applications Electromagnetic compatibility Part 1: General - Edition 3.0 2018 IEC 0 (REDLINE + STANDA 1409 TR 61340-5-2 Electrostatics Part 5-2: Protection of electronic devices from electrostatic phenomena User guide - Edition 2.0 2018 IEC 0 1410 62386-224 Digital addressable lighting interface Part 224: Particular requirements for control gear Non-replaceable light source 2018 IEC 0 (device type 23) - Edition 1.0 1411 62961 Insulating liquids Test methods for the determination of interfacial tension of insulating liquids Determination with the ring 2018 IEC 0 method - Edition 1.0 1412 TR 62697-2 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Part 2: 2018 IEC 0 Test method for quantitative determination of total corrosive sulfur (TCS) - Edition 1.0 1413 62239-1 Process management for avionics Management plan Part 1: Preparation and maintenance of an electronic components 2018 IEC 0 management plan - Edition 1.0 1414 60050-702 AMENDMENT 4 International Electrotechnical Vocabulary (IEV) - Part 702: Oscillations, signals and related devices - 2018 IEC 0 AMD 4 Edition 1.0 1415 61837-2 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead 2018 IEC 0 connections - Part 2: Ceramic enclosures - Edition 3.0 1416 62236-3-1 Railway applications Electromagnetic compatibility Part 3-1: Rolling stock Train and complete vehicle - Edition 3.0 2018 IEC 0 1417 60939-3 CORR PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION Part 3: Passive filter units for 2018 IEC 0 2 which safety tests are appropriate - Edition 1.0 1418 GUIDE 120 Security aspects - Guidelines for their inclusion in publications - Edition 1.0 2018 IEC 0 1419 60335-2-86 Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines - 2018 IEC 0 Edition 3.0 1420 60772 Nuclear power plants Instrumentation systems important to safety Electrical penetration assemblies in containment 2018 IEC 0 structures - Edition 2.0 1421 60331-1 Tests for electric cables under fire conditions Circuit integrity Part 1: Test method for fire with shock at a temperature of at 2018 IEC 0 - C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm°آ REDLINE + least 830) STANDA Editio 1422 61375-2-6 Electronic railway equipment Train communication network (TCN) Part 2-6: On-board to ground communication - Edition 2018 IEC 0 1.0 1423 61000-3-2 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current â_¤ 2018 IEC 0 (REDLINE + 16 A per phase) - Edition 5.0 STAN m 2018 IEC 0_خ Fibre optic interconnecting devices and passive components Connector optical interfaces Part 6-2: Connection of 50 61755-6-2 1424 core diameter multimode physically contacting fibres Non-angled for reference connector application, at wavelength of 850 nm using selec 1425 61987-92 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 92: Lists of 2018 IEC 0 properties (LOP) of measuring equipment for electronic data exchange Aspect LOPs - Edition 1.0 1426 60051-2 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for 2018 IEC 0 ammeters and voltmeters - Edition 5.0 1427 62138 Nuclear power plants Instrumentation and control systems important to safety Software aspects for computer-based systems 2018 IEC 0 (REDLINE + performing category B or C functions - Edition 2.0 STANDARD 1428 TS 62561-8 Lightning protection system components (LPSC) - Part 8: Requirements for components for isolated LPS - Edition 1.0 2018 IEC 0 1429 60728-2 Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for 2018 IEC 0 equipment - Edition 3.0 1430 60050-801 AMENDMENT 1 International Electrotechnical Vocabulary (IEV) Part 801: Acoustics and electroacoustics - Edition 2.0 2018 IEC 0 AMD 1 1431 60286-5 Packaging of components for automatic handling Part 5: Matrix trays - Edition 3.0 2018 IEC 0 1432 62386-221 Digital addressable lighting interface - Part 221: Particular requirements for control gear - Demand response (device type 2018 IEC 0 20) - Edition 1.0 1433 62054-11 ELECTRICITY METERING (A.C.) TARIFF AND LOAD CONTROL Part 11: Particular requirements for electronic 2018 IEC 0 CORR 1 ripple control receivers - Edition 1.0 1434 TR 62967 Methods for calculating the main static performance indicators of transducers and transmitters - Edition 1.0 2018 IEC 0 1435 60793-1-54 Optical fibres Part 1-54: Measurement methods and test procedures Gamma irradiation - Edition 3.0 2018 IEC 0 (REDLINE + STA 1436 60811-501 Electric and optical fibre cables Test methods for non-metallic materials Part 501: Mechanical tests Tests for determining 2018 IEC 0 the mechanical properties of insulating and sheathing compounds - Edition 1.1; Consolidated Reprint 1437 62684 Interoperability specifications of common external power supplies (EPS) for use with data-enabled mobile telephones - 2018 IEC 0 Edition 2.0 1438 60404-8-11 Magnetic materials Part 8-10: Specifications for individual materials Magnetic materials (iron and steel) for use in relays - 2018 IEC 0 Edition 1.0 1439 61191-1 Printed board assemblies Part 1: Generic specification Requirements for soldered electrical and electronic assemblies using 2018 IEC 0 surface mount and related assembly technologies - Edition 3.0 1440 60417 Graphical symbols for use on equipment (DATABASE SNAPSHOT) 2018 IEC 0 DATABASE SNAPSHOTS 1441 62343-3-4 Dynamic modules Part 3-4: Performance specification templates Multicast optical switches - Edition 1.0 2018 IEC 0 1442 62153-4-8 Metallic cables and other passive components Test methods Part 4-8: Electromagnetic compatibility (EMC) Capacitive 2018 IEC 0 (REDLINE + coupling admittance - Edition 2.0 STAN 1443 60358-4 Coupling capacitors and capacitor dividers Part 4: DC or AC single-phase capacitor dividers - Edition 1.0 2018 IEC 0 1444 62888-4 Railway applications Energy measurement on board trains Part 4: Communication - Edition 1.0 2018 IEC 0 1445 62946-01 Connectors for electrical and electronic equipment Part 01: Rectangular connectors Detail specification for 8-way, shielded, 2018 IEC 0 free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carrying capacity up 1446 TR 63145-1-1 Eyewear display Part 1-1: Generic introduction - Edition 1.0 2018 IEC 0 1447 61784-5-20 Industrial communication networks Profiles Part 5-20: Installation of fieldbuses Installation profiles for CPF 20 - Edition 2018 IEC 0 1.0 1448 60512-1 Connectors for electrical and electronic equipment Tests and measurements Part 1: Generic specification - Edition 5.0 2018 IEC 0 (REDLINE + STANDA 1449 62677-3-101 Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials Sheet 101: Heat- 2018 IEC 0 shrinkable, polyolefin moulded shapes for low voltage applications - Edition 1.0 1450 60721-3-1 Classification of environmental conditions Part 3-1: Classification of groups of environmental parameters and their 2018 IEC 0 severities Storage - Edition 3.0 1451 60191-1 Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of 2018 IEC 0 discrete devices - Edition 3.0 1452 62973-1 Railway applications Rolling stock Batteries for auxiliary power supply systems Part 1: General requirements - Edition 1.0 2018 IEC 0 1453 60127-8 Miniature fuses Part 8: Fuse resistors with particular overcurrent protection - Edition 1.0 2018 IEC 0 1454 62988 Nuclear power plants Instrumentation and control systems important to safety Selection and use of wireless devices - 2018 IEC 0 Edition 1.0 1455 62955 Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles - Edition 1.0 2018 IEC 0 1456 60317-74 Specifications for particular types of winding wires Part 74: Polyesterimide enamelled rectangular aluminium wire,class 2018 IEC 0 180 - Edition 1.0 1457 61340-4-5 Electrostatics Part 4-5: Standard test methods for specific applications Methods for characterizing the electrostatic 2018 IEC 0 protection of footwear and flooring in combination with a person - Edition 2.0 1458 60332-3-25 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically- 2018 IEC 0 (REDLINE + mounted bunched wires or cables - Category D - Edition 2.0 STA 1459 TS 63014-1 High voltage direct current (HVDC) power transmission System requirements for DC-side equipment Part 1: Using line- 2018 IEC 0 commutated converters - Edition 1.0 1460 62236-1 Railway applications Electromagnetic compatibility Part 1: General - Edition 3.0 2018 IEC 0 1461 60205 COR1 Calculation of the effective parameters of magnetic piece parts - Edition 4.0 2018 IEC 0 1462 TS 60076-20 Power transformers - Part 20: Energy efficiency - Edition 1.0 2018 IEC 0 CORR 1 1463 62386-218 Digital addressable lighting interface Part 218: Particular requirements for control gear Dimming curve selection (device 2018 IEC 0 type 17) - Edition 1.0 1464 60364-4-41 Low-voltage electrical installations Part 4-41: Protection for safety Protection against electric shock - Edition 5.1 2018 IEC 0 CORR 1 1465 61747-40-6 Liquid crystal display devices Part 40-6: Mechanical testing of display cover glass for mobile devices Retained biaxial 2018 IEC 0 flexural strength (abraded ring-on-ring) - Edition 1.0 1466 TR 61850-90-6 Communication networks and systems for power utility automation Part 90-6: Use of IEC 61850 for Distribution 2018 IEC 0 Automation Systems - Edition 1.0 1467 TR 62697-3 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Part 3: 2018 IEC 0 Test method for quantitative determination of elemental sulfur - Edition 1.0 1468 62853 Open systems dependability - Edition 1.0 2018 IEC 0 1469 60335-2-87 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning 2018 IEC 0 equipment - Edition 3.1; Consolidated Reprint 1470 61291-1 Optical amplifiers - Part 1: Generic specification - Edition 4.0 2018 IEC 0 1471 62325-451-6 Framework for energy market communications - Part 451-6: Publication of information on market, contextual and 2018 IEC 0 assembly models for European-style markets - Edition 2.0 1472 62054-21 ELECTRICITY METERING (AC) TARIFF AND LOAD CONTROL Part 21: Particular requirements for time switches - 2018 IEC 0 CORR 1 Edition 1.0 1473 61760-4 Surface mounting technology Part 4: Classification, packaging, labelling and handling of moisture sensitive devices - 2018 IEC 0 Edition 1.1; Consolidated Reprint 1474 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements - 2018 IEC 0 Edition 1.2; Consolidated Reprint 1475 60071-2 Insulation co-ordination Part 2: Application guidelines - Edition 4.0 2018 IEC 0 (REDLINE + STANDA 1476 62236-3-2 Railway applications Electromagnetic compatibility Part 3-2: Rolling stock Apparatus - Edition 3.0 2018 IEC 0 (REDLINE + STAN 1477 60137 CORR 1 Insulated bushings for alternating voltages above 1 000 V - Edition 7.0 2018 IEC 0 1478 60601-2-16 Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of 2018 IEC 0 (REDLINE + haemodialysis, haemodiafiltration and haemofiltration equipment - Edition 5.0 STA 1479 60332-3-10 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically- 2018 IEC 0 mounted bunched wires or cables - Apparatus - Edition 2.0 1480 62885-6 Surface cleaning appliances - Part 6: Wet hard floor cleaning appliances for household or similar use - Methods for 2018 IEC 0 measuring the performance - Edition 1.0 1481 60331-1 Tests for electric cables under fire conditions Circuit integrity Part 1: Test method for fire with shock at a temperature of at 2018 IEC 0 - C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm°آ least 830 Editio 1482 62236-3-1 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle - Edition 3.0 2018 IEC 0 (REDLINE + STAN 1483 61000-3-2 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current â_¤ 2018 IEC 0 16 A per phase) - Edition 5.0 1484 62477-2 Safety requirements for power electronic converter systems and equipment Part 2: Power electronic converters from 1 000 2018 IEC 0 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC - Edition 1.0 1485 62435-4 Electronic components - Long-term storage of electronic semiconductor devices - Part 4: Storage - Edition 1.0 2018 IEC 0 1486 60068-2-5 Environmental testing Part 2-5: Tests Test S: Simulated solar radiation at ground level and guidance for solar radiation 2018 IEC 0 (REDLINE + testing and weathering - Edition 3.0 STAN 1487 60051-3 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for 2018 IEC 0 wattmeters and varmeters - Edition 5.0 1488 62138 Nuclear power plants Instrumentation and control systems important to safety Software aspects for computer-based systems 2018 IEC 0 performing category B or C functions - Edition 2.0 1489 TR 63149 Land usage of photovoltaic (PV) farms - Mathematical models and calculation examples - Edition 1.0 2018 IEC 0 1490 61097-7 Global maritime distress and safety system (GMDSS) Part 7: Shipborne VHF radiotelephone transmitter and receiver 2018 IEC 0 Operational and performance requirements, methods of testing and required test results - Edition 1.1; Consolidated Reprint 1491 60050-806 AMENDMENT 2 International Electrotechnical Vocabulary (IEV) Part 806: Recording and reproduction of audio and 2018 IEC 0 AMD 2 video - Edition 2.0 1492 60332-3-10 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically- 2018 IEC 0 CORR 1 mounted bunched wires or cables - Apparatus - Edition 2.0 1493 62969-4 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 4: Evaluation method of data interface for 2018 IEC 0 automotive vehicle sensors - Edition 1.0 1494 60900 Live working Hand tools for use up to 1 000 V AC and 1 500 V DC - Edition 4.0 2018 IEC 0 (REDLINE + STANDARD 1495 TS 60904-13 Photovoltaic devices Part 13: Electroluminescence of photovoltaic modules - Edition 1.0 2018 IEC 0 1496 60793-1-54 Optical fibres Part 1-54: Measurement methods and test procedures Gamma irradiation - Edition 3.0 2018 IEC 0 1497 60335-2-6 Household and similar electrical appliances Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, 2018 IEC 0 ovens and similar appliances - Edition 6.1; Consolidated Reprint 1498 61400-11 Wind turbines Part 11: Acoustic noise measurement techniques - Edition 3.1;Consolidated Reprint 2018 IEC 0 1499 60404-16 Magnetic materials Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of 2018 IEC 0 a single sheet tester - Edition 1.0 1500 60335-2-24 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice- 2018 IEC 0 AMD 2 INT 1 cream appliances and ice-makers - Edition 7.2 1501 60050-871 International electrotechnical vocabulary Part 871: Active assisted living (AAL) - Edition 1.0 2018 IEC 0 1502 62153-4-8 Metallic communication cable test methods Part 4-8: Electromagnetic compatibility (EMC) Capacitive coupling admittance 2018 IEC 0 - Edition 2.0 1503 60320-2-3 Appliance Couplers for Household and Similar General Purposes - Part 2-3: Appliance Coupler with a Degree of Protection 2018 IEC 0 (REDLINE + Higher Than IPX0 - Edition 2.0 STAN 1504 62841-4-2 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN 2018 IEC 0 CORR 1 MACHINERY SAFETY Part 4-2: Particular requirements for hedge trimmers - Edition 1.0 1505 ACEE 02 IEC Advisory Committee on energy efficiency (ACEE) Case study: electric motors - Edition 1.0 2018 IEC 0 1506 63032 Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification - 2018 IEC 0 Edition 1.0 1507 60709 Nuclear power plants Instrumentation, control and electrical power systems important to safety Separation - Edition 3.0 2018 IEC 0 1508 61784-5-21 Industrial communication networks Profiles Part 5-21: Installation of fieldbuses Installation profiles for CPF 21 - Edition 2018 IEC 0 1.0 1509 60512-1 Connectors for electrical and electronic equipment Tests and measurements Part 1: Generic specification - Edition 5.0 2018 IEC 0 1510 62677-3-102 Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials Sheet 102: Heat- 2018 IEC 0 shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications - Edition 1.0 1511 60721-3-2 Classification of environmental conditions Part 3-2: Classification of groups of environmental parameters and their 2018 IEC 0 (REDLINE + severities Transportation and handling - Edition 3.0 STAN 1512 60156 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method - Edition 3.0 2018 IEC 0 (REDLINE + STANDARD 1513 60335-2-71 Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for 2018 IEC 0 breeding and rearing animals - Edition 3.0 1514 60079-1 CORR EXPLOSIVE ATMOSPHERES Part 1: Equipment protection by flameproof enclosures "d" - Edition 7.0 2018 IEC 0 1 1515 TS 62915 Photovoltaic (PV) modules Type approval, design and safety qualification Retesting - Edition 1.0 2018 IEC 0 1516 60320-2-1 Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers - Edition 3.0 2018 IEC 0 1517 61938 Multimedia systems Guide to the recommended characteristics of analogue interfaces to achieve interoperability - Edition 2018 IEC 0 (REDLINE + 3.0 STANDARD 1518 62236-2 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world - 2018 IEC 0 (REDLINE + Edition 3.0 STANDA 1519 62271-100 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 100: Alternating-current circuit-breakers - Edition 2.0 2018 IEC 0 AMD 2 CORR 1 1520 61937-2 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 2: Burst-info - Edition 2.2; 2018 IEC 0 Consolidated Reprint 1521 63093-7 Ferrite cores Guidelines on dimensions and the limits of surface irregularities Part 7: EER-cores - Edition 1.0 2018 IEC 0 1522 61010-2-101 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular 2018 IEC 0 requirements for in vitro diagnostic (IVD) medical equipment - Edition 3.0 1523 62595-2-2 Display lighting unit Part 2-2: Measuring methods of LED light bars used in LCD BLUs - Edition 1.0 2018 IEC 0 1524 63093-11 Ferrite cores Guidelines on dimensions and the limits of surface irregularities Part 11: EC-cores for use in power supply 2018 IEC 0 applications - Edition 1.0 1525 TS 62993 GUIDANCE FOR DETERMINATION OF CLEARANCES, CREEPAGE DISTANCES AND REQUIREMENTS FOR 2018 IEC 0 CORR 1 SOLID INSULATION FOR EQUIPMENT WITH A RATED VOLTAGE ABOVE 1 000 V AC AND 1 500 V DC, AND UP TO 2 000 V AC AND 3 000 V DC - Edition 1.0 1526 61970-302 Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM) 2018 IEC 0 dynamics - Edition 1.0 1527 62576 Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics - Edition 2.0 2018 IEC 0 1528 CISPR 15 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment - 2018 IEC 0 Edition 9.0 1529 61051-1 Varistors for use in electronic equipment Part 1: Generic specification - Edition 3.0 2018 IEC 0 (REDLINE + STANDA 1530 60050-713 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) - Part 713: Radiocommunications: transmitters, 2018 IEC 0 AMD 3 receivers, networks and operation - Edition 1.0 1531 62052-11 COR Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment - 2018 IEC 0 1 Edition 1.0 1532 62504 General lighting Light emitting diode (LED) products and related equipment Terms and definitions - Edition 1.1; 2018 IEC 0 Consolidated Reprint 1533 62236-3-2 Railway applications Electromagnetic compatibility Part 3-2: Rolling stock Apparatus - Edition 3.0 2018 IEC 0 1534 60332-3-21 Tests on electric and optical fibre cables under fire conditions Part 3-21: Test for vertical flame spread of vertically- 2018 IEC 0 (REDLINE + mounted bunched wires or cables Category A F/R - Edition 2.0 STA 1535 60730-2-13 Automatic electrical controls Part 2-13: Particular requirements for humidity sensing controls CORRIGENDUM 1 - 2018 IEC 0 CORR 1 Edition 3.0 1536 60601-2-16 Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of 2018 IEC 0 haemodialysis, haemodiafiltration and haemofiltration equipment - Edition 5.0 1537 60092-101 Electrical installations in ships - Part 101: Definitions and general requirements - Edition 5.0 2018 IEC 0 1538 62995 Railway applications Rolling stock Rules for installation of cabling - Edition 1.0 2018 IEC 0 1539 60331-2 Tests for electric cables under fire conditions Circuit integrity Part 2: Test method for fire with shock at a temperature of at 2018 IEC 0 - C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm°آ REDLINE + least 830) STANDA Ed 1540 60061-4 AMD Amendment 16 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: 2018 IEC 0 16 Guidelines and general information - Edition 1.9 1541 62046 Safety of machinery - Application of protective equipment to detect the presence of persons - Edition 1.0 2018 IEC 0 1542 61757 Fibre optic sensors - Generic specification - Edition 1.0 2018 IEC 0 1543 60335-2-114 Household and similar electrical appliances Safety Part 2-114: Particular requirements for self-balancing personal transport 2018 IEC 0 devices for use with batteries containing alkaline or other non-acid electrolytes - Edition 1.0 1544 62899-403-1 Printed electronics Part 403-1: Printability Requirements for reproducibility Basic patterns for evaluation of printing 2018 IEC 0 machine - Edition 1.0 1545 61196-1-303 Coaxial communication cables Part 1-303: Mechanical test methods Test for silver and tin plating thickness - Edition 1.0 2018 IEC 0 1546 62676-5 Video surveillance systems for use in security applications - Part 5: Data specifications and image quality performance for 2018 IEC 0 camera devices - Edition 1.0 1547 60068-2-5 Environmental testing Part 2-5: Tests Test S: Simulated solar radiation at ground level and guidance for solar radiation 2018 IEC 0 testing and weathering - Edition 3.0 1548 60051-4 Direct acting indicating analogue electrical measuring instruments and their accessories title - Part 4: Special requirements 2018 IEC 0 for frequency meters - Edition 5.0 1549 60404-6 Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder 2018 IEC 0 (REDLINE + materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens - Edition 3.0 STANDA 1550 61249-2-45 Materials for printed boards and other interconnecting structures Part 2-45: Reinforced base materials clad and unclad Non- 2018 IEC 0 halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(mâ__K) and defined flammabilit 1551 62887 Nuclear power plants - Instrumentation systems important to safety - Pressure transmitters: Characteristics and test methods 2018 IEC 0 - Edition 1.0 1552 60050-808 AMENDMENT 1 International Electrotechnical Vocabulary (IEV) Part 808: Video cameras for non-broadcasting - Edition 2018 IEC 0 AMD 1 1.0 1553 61000-6-4 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments - Edition 2018 IEC 0 3.0 1554 SYMBOL Graphical symbols for use on equipment - graphical symbols published in IEC 60417 and ISO 7000 Graphical symbols for 2018 IEC 0 DATABASE use on equipment SNAPSHOTS 1555 60297-3-110 Mechanical structures for electrical and electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) 2018 IEC 0 series Part 3-110: Residential racks and cabinets for smart houses - Edition 1.0 1556 TR 62240-2 Process management for avionics - Electronic components capability in operation - Part 2: Semiconductor microcircuit 2018 IEC 0 lifetime - Edition 1.0 1557 60900 Live working Hand tools for use up to 1 000 V AC and 1 500 V DC - Edition 4.0 2018 IEC 0 1558 TS 62600-30 Marine energy Wave, tidal and other water current converters Part 30: Electrical power quality requirements - Edition 1.0 2018 IEC 0 1559 62446-1 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - 2018 IEC 0 Documentation, commissioning tests and inspection - Edition 1.1; Consolidated Reprint 1560 62442-1 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine 2018 IEC 0 (REDLINE + the total input power of controlgear circuits and the efficiency of controlgear - Edition 2.0 STANDA 1561 TS 62885-1 Surface cleaning appliances - Part 1: General requirements on test material and test equipment - Edition 2.0 2018 IEC 0 1562 61125 Insulating liquids Test methods for oxidation stability Test method for evaluating the oxidation stability of insulating 2018 IEC 0 liquids in the delivered state - Edition 2.0 1563 61482-2 Live working Protective clothing against the thermal hazards of an electric arc Part 2: Requirements - Edition 2.0 2018 IEC 0 (REDLINE + STANDA 1564 60799 Electrical accessories Cord sets and interconnection cord sets - Edition 3.0 2018 IEC 0 (REDLINE + STANDARD 1565 60332-3-24 Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically- 2018 IEC 0 mounted bunched wires or cables Category C - Edition 2.0 1566 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps 2018 IEC 0 DATABASE (DATABASE SNAPSHOT) SNAPSHOT 1567 61000-2-2 Electromagnetic compatibility (EMC) Part 2-2: Environment Compatibility levels for lowfrequency conducted disturbances 2018 IEC 0 and signalling in public low-voltage power supply systems - Edition 2.2; Consolidated Reprint 1568 60320-2-3 Appliance couplers for household and similar general purposes Part 2-3: Appliance couplers with a degree of protection 2018 IEC 0 higher than IPX0 - Edition 2.0 1569 ACEE 01 IEC Advisory Committee on energy efficiency (ACEE) Introduction to ACEE work - Edition 1.0 2018 IEC 0 1570 TR 63130 Dimming and hot restrike of metal halide lamps - Edition 1.0 2018 IEC 0 1571 60730-2-8 Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including 2018 IEC 0 (REDLINE + mechanical requirements - Edition 3.0 STAN 1572 61851-21-2 Electric vehicle conductive charging system Part 21-2: Electric vehicle requirements for conductive connection to an 2018 IEC 0 AC/DC supply EMC requirements for off-board electric vehicle charging systems - Edition 1.0 1573 61853-3 Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules - Edition 1.0 2018 IEC 0 1574 61557-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. - Equipment for testing, measuring 2018 IEC 0 (REDLINE + or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) - Edition 2.0 STAND 1575 62731 Text-to-speech for television General requirements - Edition 2.0 2018 IEC 0 1576 60721-3-2 Classification of environmental conditions Part 3-2: Classification of groups of environmental parameters and their 2018 IEC 0 severities Transportation and handling - Edition 3.0 1577 60276 Carbon brushes, brush holders, commutators and slip-rings Definitions and nomenclature - Edition 2.0 2018 IEC 0 1578 TR 61511-0 Functional safety Safety instrumented systems for the process industry sector Part 0: Functional safety for the process 2018 IEC 0 industry and IEC 61511 - Edition 1.0 1579 60825-2 INT 2 SAFETY OF LASER PRODUCTS Part 2: Safety of optical fibre communication systems (OFCS) - Edition 3.0 2018 IEC 0 1580 60601-2-4 Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac 2018 IEC 0 defibrillators - Edition 3.1; Consolidated Reprint 1581 62386-102 Digital addressable lighting interface - Part 102: General requirements - Control gear - Edition 2.1; Consolidated Reprint 2018 IEC 0 1582 61938 Multimedia systems Guide to the recommended characteristics of analogue interfaces to achieve interoperability - Edition 2018 IEC 0 3.0 1583 60191-2 AMD AMENDMENT 20 The sheets contained in this amendment are to be inserted in IEC 60191-2 Mechanical standardization 2018 IEC 0 20 of semiconductor devices Part 2: Dimensions - Edition 1.0 1584 62236-2 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world - 2018 IEC 0 Edition 3.0 1585 63029 CORR 1 Audio, video multimedia systems and equipment Multimedia e-publishing and e-book technologies Raster-graphics image- 2018 IEC 0 based e-books - Edition 1.0 1586 80601-2-30 Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of automated 2018 IEC 0 non-invasive sphygmomanometers - Edition 2.0 1587 61010-2-051 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular 2018 IEC 0 (REDLINE + requirements for laboratory equipment for mixing and stirring - Edition 4.0 ST 1588 60099-5 Surge arresters Part 5: Selection and application recommendations - Edition 3.0 2018 IEC 0 (REDLINE + STANDA 1589 62595-2-3 Display lighting unit Part 2-3: Electro-optical measuring methods for LED frontlight unit - Edition 1.0 2018 IEC 0 1590 TR 62246-3 Reed switches Part 3: Reliability data for reed switch-devices in typical safety applications - Edition 1.0 2018 IEC 0 1591 TS 62257-9-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems 2018 IEC 0 Laboratory evaluation of stand-alone renewable energy products for rural electrification - Edition 4.0 1592 62040-2 INT 1 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements - Edition 3.0 2018 IEC 0 1593 60384-26 Fixed capacitors for use in electronic equipment Part 26: Sectional specification Fixed aluminium electrolytic capacitors 2018 IEC 0 (REDLINE + with conductive polymer solid electrolyte - Edition 2.0 STAND 1594 62282-5-100 Fuel cell technologies Part 5-100: Portable fuel cell power systems Safety - Edition 1.0 2018 IEC 0 1595 TS 62862-1-1 Solar thermal electric plants - Part 1-1: Terminology - Edition 1.0 2018 IEC 0 1596 60050-511 International electrotechnical vocabulary Part 511: Nano-enabled electrotechnical products and systems - Edition 1.0 2018 IEC 0 1597 61051-1 Varistors for use in electronic equipment Part 1: Generic specification - Edition 3.0 2018 IEC 0 1598 60050-714 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) Part 714: Switching and signalling in 2018 IEC 0 AMD 3 telecommunications - Edition 1.0 1599 TR 63170 Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from 2018 IEC 0 wireless communication devices operating between 6 GHz and 100 GHz - Edition 1.0 1600 62052-21 ELECTRICITY METERING EQUIPMENT (A.C.) GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS 2018 IEC 0 CORR 1 Part 21: Tariff and load control equipment CORRIGENDUM 1 - Edition 1.0 1601 TR 62240-1 Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating - Edition 2018 IEC 0 (REDLINE + 2.0 STA 1602 62236-4 Railway applications Electromagnetic compatibility Part 4: Emission and immunity of the signalling and 2018 IEC 0 (REDLINE + telecommunications apparatus - Edition 3.0 STANDA 1603 60191-4 Mechanical Standardization of Semiconductor Devices - Part 4: Coding System and Classification into Forms of Package 2018 IEC 0 Outlines for Semiconductor Device Packages - Edition 3.1; Consolidated reprint 1604 62325-503 Framework for energy market communications - Part 503: Market data exchanges guidelines for the IEC 62325-351 profile 2018 IEC 0 - Edition 1.0 1605 60332-3-21 Tests on electric and optical fibre cables under fire conditions Part 3-21: Test for vertical flame spread of vertically- 2018 IEC 0 mounted bunched wires or cables Category A F/R - Edition 2.0 1606 61993-2 Maritime navigation and radiocommunication equipment and systems Automatic identification systems (AIS) Part 2: Class 2018 IEC 0 A shipborne equipment of the automatic identification system (AIS) Operational and performance requirements, methods of test and required 1607 60675 Household electric direct-acting room heaters Methods for measuring performance - Edition 2.2 Consolidated Reprint 2018 IEC 0 1608 60332-3-10 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically- 2018 IEC 0 (REDLINE + mounted bunched wires or cables - Apparatus - Edition 2.0 STA 1609 60331-2 Tests for electric cables under fire conditions Circuit integrity Part 2: Test method for fire with shock at a temperature of at 2018 IEC 0 - C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm°آ least 830 Ed 1610 62561-2 Lightning protection system components (LPSC) Part 2: Requirements for conductors and earth electrodes - Edition 2.0 2018 IEC 0 1611 60601-2-76 Medical electrical equipment Part 2-76: Particular requirements for the basic safety and essential performance of low 2018 IEC 0 energy ionized gas haemostasis equipment - Edition 1.0 1612 62228-1 Integrated circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions - Edition 1.0 2018 IEC 0 1613 TR 63167 Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields - Edition 1.0 2018 IEC 0 1614 60601-2-39 Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal 2018 IEC 0 (REDLINE + dialysis equipment - Edition 3.0 STA 1615 61784-5-2 Industrial communication networks Profiles Part 5-2: Installation of fieldbuses Installation profiles for CPF 2 - Edition 4.0 2018 IEC 0 1616 60404-6 Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder 2018 IEC 0 materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens - Edition 3.0 1617 61249-2-46 Materials for printed boards and other interconnecting structures Part 2-46: Reinforced base materials clad and unclad Non- 2018 IEC 0 halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(mâ__K) and defined flammabilit 1618 62005-9-4 Fibre optic interconnecting devices and passive components Reliability Part 9-4: High power qualification of passive 2018 IEC 0 optical components for environmental category C - Edition 1.0 1619 61753-1 Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance - 2018 IEC 0 (REDLINE + Edition 2.0 STANDA 1620 TS 62607-4-7 Nanomanufacturing Key control characteristics Part 4-7: Nano-enabled electrical energy storage Determination of magnetic 2018 IEC 0 impurities in anode nanomaterials, ICP-OES method - Edition 1.0 1621 62442-1 Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps Method of measurement to determine 2018 IEC 0 the total input power of controlgear circuits and the efficiency of controlgear - Edition 2.0 1622 61196-1-113 Coaxial communication cables Part 1-113: Electrical test methods Test for attenuation constant - Edition 2.0 2018 IEC 0 1623 61482-2 Live working Protective clothing against the thermal hazards of an electric arc Part 2: Requirements - Edition 2.0 2018 IEC 0 1624 60799 Electrical accessories Cord sets and interconnection cord sets - Edition 3.0 2018 IEC 0 1625 60099-5 Surge arresters Part 5: Selection and application recommendations - Edition 3.0 2018 IEC 0 1626 80601-2-30 Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of automated 2018 IEC 0 (REDLINE + non-invasive sphygmomanometers - Edition 2.0 STA 1627 60061-2 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders 2018 IEC 0 DATABASE (DATABASE SNAPSHOT) SNAPSHOT 1628 61466-2 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V Part 2: Dimensional and 2018 IEC 0 electrical characteristics - Edition 1.2; Consolidated Reprint 1629 60320-2-4 Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for 2018 IEC 0 (REDLINE + engagement - Edition 2.0 STAN 1630 TR 62271-306 High-voltage switchgear and controlgear Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related 2018 IEC 0 to alternating current circuit-breakers - Edition 1.1; Consolidated Reprint 1631 62680-1-4 Universal serial bus interfaces for data and power Part 1-4: Common components USB Type-C Authentication 2018 IEC 0 Specification - Edition 1.0 1632 TS 62565-4-2 Nanomanufacturing Material specifications Part 4-2: Luminescent nanomaterials Detail specification for general lighting 2018 IEC 0 and display applications - Edition 1.0 1633 60730-2-8 Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including 2018 IEC 0 mechanical requirements - Edition 3.0 1634 62828-3 Reference conditions and procedures for testing industrial and process measurement transmitters Part 3: Specific 2018 IEC 0 procedures for temperature transmitters - Edition 1.0 1635 61557-12 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2018 IEC 0 or monitoring of protective measures Part 12: Performance measuring and monitoring devices (PMD) - Edition 2.0 1636 TR 61948-3 Nuclear medicine instrumentation - Routine tests - Part 3: Positron emission tomographs - Edition 2.0 2018 IEC 0 1637 60375 Conventions concerning electric circuits - Edition 3.0 2018 IEC 0 1638 60156 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method - Edition 3.0 2018 IEC 0 1639 TR 62351-90-1 Power systems management and associated information exchange - Data and communications security - Part 90-1: 2018 IEC 0 Guidelines for handling role-based access control in power systems - Edition 1.0; Includes Access to Additional Content 1640 TS 62361-102 Power systems management and associated information exchange - Interoperability in the long term - Part 102: CIM - IEC 2018 IEC 0 61850 harmonization - Edition 1.0 1641 60189-1 Low-frequency cables and wires with PVC insulation and PVC sheath Part 1: General test and measuring methods - Edition 2018 IEC 0 (REDLINE + 4.0 STANDA 1642 61347-2-14 Lamp controlgear Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent 2018 IEC 0 induction lamps - Edition 1.0 1643 62271-110 High-voltage switchgear and controlgear Part 110: Inductive load switching CORRIGENDUM 2 - Edition 4.0 2018 IEC 0 CORR 2 1644 62386-103 Digital addressable lighting interface - Part 103: General requirements - Control devices - Edition 1.1; Consolidated Reprint 2018 IEC 0 1645 62343-5-2 Dynamic modules Part 5-2: Test methods 1 x N fixed-grid WSS Dynamic crosstalk measurement - Edition 1.0 2018 IEC 0 1646 60364-7-722 Low-voltage electrical installations Part 7-722: Requirements for special installations or locations Supplies for electric 2018 IEC 0 (REDLINE + vehicles - Edition 2.0 ST 1647 62884-3 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 3: Frequency aging test methods - 2018 IEC 0 Edition 1.0 1648 61010-2-051 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular 2018 IEC 0 requirements for laboratory equipment for mixing and stirring - Edition 4.0 1649 TS 62607-4-6 Nanomanufacturing Key control characteristics Part 4-6: Nano-enabled electrical energy storage Determination of carbon 2018 IEC 0 content for nano-enabled electrode materials, infrared absorption method - Edition 1.0 1650 60364-4-44 Low-voltage electrical installations Part 4-44: Protection for safety Protection against voltage disturbances and 2018 IEC 0 electromagnetic disturbances - Edition 2.2 Consolidated Reprint 1651 TS 61724-3 PHOTOVOLTAIC SYSTEM PERFORMANCE - Part 3: Energy evaluation method CORRIGENDUM 1 - Edition 1.0 2018 IEC 0 CORR 1 1652 62586-2 CORR Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements - Edition 2.0 2018 IEC 0 1 1653 62610-2 Mechanical structures for electrical and electronic equipment Thermal management for cabinets in accordance with IEC 2018 IEC 0 60297 and IEC 60917 series Part 2: Method for the determination of forced air cooling - Edition 1.0 1654 62386-207 Digital addressable lighting interface Part 207: Particular requirements for control gear LED modules (device type 6) - 2018 IEC 0 Edition 2.0 1655 60794-1-31 Optical fibre cables Part 1-31: Generic specification Optical cable elements Optical fibre ribbon - Edition 1.0 2018 IEC 0 1656 60050-721 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) Part 721: Telegraphy, facsimile and data 2018 IEC 0 AMD 3 communication - Edition 1.0 1657 60068-2-10 Environmental testing Part 2-10: Tests Test J and guidance: Mould growth - Edition 6.1; Consolidated Reprint 2018 IEC 0 1658 62053-11 AMD ELECTRICITY METERING EQUIPMENT (A.C.) PARTICULAR REQUIREMENTS Part 11: Electromechanical meters 2018 IEC 0 1 CORR 1 for active energy (classes 0,5, 1 and 2) - Edition 1.1 1659 61788-25 Superconductivity Part 25: Mechanical properties measurement Room temperature tensile test on REBCO wires - Edition 2018 IEC 0 1.0 1660 TR 62240-1 Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating - Edition 2018 IEC 0 2.0 1661 61162-450 Maritime navigation and radiocommunication equipment and systems Digital interfaces - Part 450: Multiple talkers and 2018 IEC 0 multiple listeners - Ethernet interconnection - Edition 2.0 1662 62236-4 Railway applications Electromagnetic compatibility Part 4: Emission and immunity of the signalling and 2018 IEC 0 telecommunications apparatus - Edition 3.0 1663 60076-7 Power transformers Part 7: Loading guide for mineral-oil-immersed power transformers - Edition 2.0 2018 IEC 0 (REDLINE + STANDA 1664 60034-27-4 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation 2018 IEC 0 of rotating electrical machines - Edition 1.0 1665 60332-3-22 Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically- 2018 IEC 0 (STANDARD + mounted bunched wires or cables Category A - Edition 2.0 RE 1666 61500 Nuclear power plants Instrumentation and control systems important to safety Data communication in systems performing 2018 IEC 0 (REDLINE + category A functions - Edition 3.0 STANDARD 1667 60331-3 Tests for electric cables under fire conditions Circuit integrity Part 3: Test method for fire with shock at a temperature of at 2018 IEC 0 C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure - Edition 2.0°آ REDLINE + least 830) STANDA 1668 60404-2 CORR Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means 2018 IEC 0 1 of an Epstein frame - Edition 3.0 1669 60034-4-1 Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from 2018 IEC 0 tests - Edition 1.0 1670 TR 62351-90-2 Power systems management and associated information exchange Data and communications security Part 90-2: Deep 2018 IEC 0 packet inspection of encrypted communications - Edition 1.0 1671 62561-6 Lightning protection system components (LPSC) Part 6: Requirements for lightning strike counters (LSC) - Edition 2.0 2018 IEC 0 1672 60061-3 AMD Amendment 55 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2018 IEC 0 55 - Edition 3.44 1673 61937-13 Digital audio Interface for non-linear pcm encoded audio bitstreams applying IEC 60958 Part 13: MPEG-H 3D Audio - 2018 IEC 0 Edition 1.0 1674 62906-5-4 Laser display devices - Part 5-4: Optical measuring methods of colour speckle - Edition 1.0 2018 IEC 0 1675 60601-2-39 Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal 2018 IEC 0 dialysis equipment - Edition 3.0 1676 61784-5-3 Industrial communication networks Profiles Part 5-3: Installation of fieldbuses Installation profiles for CPF 3 - Edition 4.0 2018 IEC 0 1677 60364-8-2 Low-voltage electrical installations Part 8-2: Prosumerâ__s low-voltage electrical installations - Edition 1.0 2018 IEC 0 1678 61340-4-4 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate 2018 IEC 0 (REDLINE + bulk containers (FIBC) - Edition 3.0 STAN 1679 62351-3 Power systems management and associated information exchange - Data and communications security - Part 3: 2018 IEC 0 Communication network and system security - Profiles including TCP/IP - Edition 1.1; Consolidated Reprint 1680 61249-2-47 Materials for printed boards and other interconnecting structures Part 2-47: Reinforced base materials clad and unclad Non- 2018 IEC 0 halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(mâ__K) and defined flammabilit 1681 62752 AMD 1 AMENDMENT 1 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) - Edition 2018 IEC 0 1.0 1682 60079-18 EXPLOSIVE ATMOSPHERES Part 18: Equipment protection by encapsulation "m" - Edition 4.1 2018 IEC 0 CORR 1 1683 60034-14 Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - 2018 IEC 0 Measurement, evaluation and limits of vibration severity - Edition 4.0 1684 60793-1-49 Optical fibres Part 1-49: Measurement methods and test procedures Differential mode delay - Edition 3.0 2018 IEC 0 1685 61162-450 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and 2018 IEC 0 (REDLINE + multiple listeners - Ethernet interconnection - Edition 2.0 STAN 1686 TS 62876-2-1 Nanotechnology Reliability assessment Part 2-1: Nano-enabled photovoltaic devices Stability test - Edition 1.0 2018 IEC 0 1687 62442-2 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent 2018 IEC 0 (REDLINE + lamps) - Method of measurement to determine the efficiency of controlgear - Edition 2.0 STANDA 1688 61196-5 Coaxial communication cables Part 5: Sectional specification for CATV trunk and distribution cables - Edition 3.0 2018 IEC 0 1689 62031 LED modules for general lighting Safety specifications - Edition 2.0 2018 IEC 0 (REDLINE + STANDARD 1690 62841-2-11 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular 2018 IEC 0 requirements for hand-held reciprocating saws - Edition 1.1; Consolidated Version 1691 62746-10-3 Systems interface between customer energy management system and the power management system Part 10-3: Open 2018 IEC 0 automated demand response Adapting smart grid user interfaces to the IEC common information model - Edition 1.0 1692 61010-031 Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for 2018 IEC 0 CORR 1 hand-held and hand-manipulated probe assemblies for electrical test and measurement - Edition 2.1 1693 60076-3 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air - Edition 3.1; Consolidated 2018 IEC 0 Reprint 1694 60061-3 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (DATABASE 2018 IEC 0 DATABASE SNAPSHOT) SNAPSHOT 1695 62153-4-7 Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of 2018 IEC 0 transfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and assemblies up to and above 3 GHz Triaxial 1696 60320-2-4 Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for 2018 IEC 0 engagement - Edition 2.0 1697 TS 62647-4 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 4: Ball grid 2018 IEC 0 array (BGA) re-balling - Edition 1.0 1698 63093-5 Ferrite cores Guidelines on dimensions and the limits of surface irregularities Part 5: EP-cores and associated parts for use 2018 IEC 0 in inductors and transformers - Edition 1.0 1699 62714-1 Engineering data exchange format for use in industrial automation systems engineering Automation markup language Part 2018 IEC 0 (REDLINE + 1: Architecture and general requirements - Edition 2.0 STANDA 1700 62702-1-1 AUDIO ARCHIVE SYSTEM - Part 1-1: DVD disk and data migration for long term audio data storage CORRIGENDUM 2018 IEC 0 CORR 1 1 - Edition 1.0 1701 60794-4-20 Optical fibre cables - Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family 2018 IEC 0 (REDLINE + specification for ADSS (all dielectric self-supported) optical cables - Edition 2.0 STA 1702 TR 62361-103 Power systems management and associated information exchange - Interoperability in the long term Part 103: Standard 2018 IEC 0 profiling - Edition 1.0 1703 61167 Metal halide lamps Performance specification - Edition 4.1; Consolidated Reprint 2018 IEC 0 1704 61238-1-1 Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and 2018 IEC 0 mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors - Edition 1.0 1705 TS 63064 Graphical symbols for diagrams Guidance on design for standardization in IEC 60617 - Edition 1.0 2018 IEC 0 1706 TR 63158 Equipment for general lighting purposes Objective test method for stroboscopic effects of lighting equipment - Edition 1.0 2018 IEC 0 1707 TS 61245 ARTIFICIAL POLLUTION TESTS ON HIGH-VOLTAGE CERAMIC AND GLASS INSULATORS TO BE USED ON 2018 IEC 0 CORR 1 D.C. SYSTEMS - Edition 2.0 1708 60189-1 Low-frequency cables and wires with PVC insulation and PVC sheath Part 1: General test and measuring methods - Edition 2018 IEC 0 4.0 1709 61747-40-5 Liquid crystal display devices Part 40-5: Mechanical testing of display cover glass for mobile devices Strength against 2018 IEC 0 dynamic impact by a sharp object with the specimen rigidly supported - Edition 1.0 1710 62899-202-5 Printed electronics - Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on an 2018 IEC 0 insulating substrate - Edition 1.0 1711 62443-4-1 Security for industrial automation and control systems Part 4-1: Secure product development lifecycle requirements - 2018 IEC 0 Edition 1.0 1712 TS 62600-103 Marine energy - Wave, tidal and other water current converters Part 103: Guidelines for the early stage development of 2018 IEC 0 wave energy converters - Best practices and recommended procedures for the testing of pre-prototype devices - Edition 1.0 1713 60364-7-722 Low-voltage electrical installations Part 7-722: Requirements for special installations or locations Supplies for electric 2018 IEC 0 vehicles - Edition 2.0 1714 60320-3 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges - Edition 1.1; 2018 IEC 0 Consolidated Reprint 1715 61010-2-101 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular 2018 IEC 0 (REDLINE + requirements for in vitro diagnostic (IVD) medical equipment - Edition 3.0 ST 1716 60310 CORR 1 RAILWAY APPLICATIONS TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK - 2018 IEC 0 Edition 4.0 1717 60384-26 Fixed capacitors for use in electronic equipment Part 26: Sectional specification Fixed aluminium electrolytic capacitors 2018 IEC 0 with conductive polymer solid electrolyte - Edition 2.0 1718 62386-333 Digital addressable lighting interface Part 333: Particular requirements for control devices Manual configuration (feature 2018 IEC 0 type 33) - Edition 1.0 1719 62271-102 High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches - Edition 2.0 2018 IEC 0 1720 60050-704 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) - Part 704: Transmission - Edition 1.0 2018 IEC 0 AMD 3 1721 60068-2-74 Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination - Edition 1.1; Consolidated Reprint 2018 IEC 0 1722 62053-21 AMD ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - Part 21: Static meters for active 2018 IEC 0 1 CORR 1 energy (classes 1 and 2) - Edition 1.1 1723 60268-4 Sound system equipment - Part 4: Microphones - Edition 6.0 2018 IEC 0 (REDLINE + STANDA 1724 62435-6 Electronic components Long-term storage of electronic semiconductor devices Part 6: Packaged or finished devices - 2018 IEC 0 Edition 1.0 1725 TS 61850-7-7 Communication networks and systems for power utility automation Part 7-7: Machine-processable format of IEC 61850- 2018 IEC 0 related data models for tools - Edition 1.0 1726 60812 Failure modes and effects analysis (FMEA and FMECA) - Edition 3.0 2018 IEC 0 1727 61162-460 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and 2018 IEC 0 multiple listeners - Ethernet interconnection - Safety and security - Edition 2.0 1728 62236-5 Railway applications Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations and 2018 IEC 0 (REDLINE + apparatus - Edition 3.0 STANDA 1729 60076-7 Power transformers Part 7: Loading guide for mineral-oil-immersed power transformers - Edition 2.0 2018 IEC 0 1730 62271-101 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 101: Synthetic testing - Edition 2.0 2018 IEC 0 CORR 1 1731 60332-3-22 Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically- 2018 IEC 0 mounted bunched wires or cables Category A - Edition 2.0 1732 61215-2 CORR Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 2: Test procedures - Edition 1.0 2018 IEC 0 1 1733 61500 Nuclear power plants Instrumentation and control systems important to safety Data communication in systems performing 2018 IEC 0 category A functions - Edition 3.0 1734 60331-3 Tests for electric cables under fire conditions Circuit integrity Part 3: Test method for fire with shock at a temperature of at 2018 IEC 0 C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure - Edition 2.0°آ least 830 1735 60404-10 MAGNETIC MATERIALS - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at 2018 IEC 0 CORR 1 medium frequencies - Edition 2.0 1736 60974-9 Arc welding equipment Part 9: Installation and use - Edition 2.0 2018 IEC 0 (REDLINE + STANDA 1737 62561-7 Lightning protection system components (LPSC) Part 7: Requirements for earthing enhancing compounds - Edition 2.0 2018 IEC 0 1738 60061-1 AMD Amendment 58 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2018 IEC 0 58 caps - Edition 3.35 1739 62386-222 Digital addressable lighting interface Part 222: Particular requirements for control gear Thermal lamp protection (device 2018 IEC 0 type 21) - Edition 1.0 1740 PAS 61076-3- Connectors for electrical and electronic equipment Product requirements Part 3-126: Rectangular connectors Detail 2018 IEC 0 126 specification for 5 pole power connectors for industrial environments with push-pull locking - Edition 1.0 1741 61784-5-6 Industrial communication networks Profiles Part 5-6: Installation of fieldbuses Installation profiles for CPF 6 IEC - Edition 2018 IEC 0 4.0 1742 62106-1 Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 1: 2018 IEC 0 Modulation characteristics and baseband coding - Edition 1.0 1743 61340-4-4 Electrostatics Part 4-4: Standard test methods for specific applications Electrostatic classification of flexible intermediate 2018 IEC 0 bulk containers (FIBC) - Edition 3.0 1744 62386-101 Digital addressable lighting interface Part 101: General requirements System components - Edition 2.1;Consolidated 2018 IEC 0 Reprint 1745 61643-31 Low-voltage surge protective devices Part 31: Requirements and test methods for SPDs for photovoltaic installations - 2018 IEC 0 Edition 1.0 1746 60068-3-5 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature 2018 IEC 0 (REDLINE + chambers - Edition 2.0 STAN 1747 61000-6-4 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments - Edition 2018 IEC 0 (REDLINE + 3.0 STAN 1748 62153-4-17 Metallic cables and other passive components Test methods Part 4-17: Electromagnetic compatibility (EMC) Reduction 2018 IEC 0 Factor - Edition 1.0 1749 61162-460 Maritime navigation and radiocommunication equipmentand systems - Digital interfaces - Part 460: Multiple talkers and 2018 IEC 0 (REDLINE + multiple listeners - Ethernet interconnection - Safety and security - Edition 2.0 STAN 1750 TS 62933-3-1 Electrical energy storage (EES) systems Part 3-1: Planning and performance assessment of electrical energy storage 2018 IEC 0 systems General specification - Edition 1.0 1751 62442-2 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent 2018 IEC 0 lamps) - Method of measurement to determine the efficiency of controlgear - Edition 2.0 1752 61196-6-2 Coaxial communication cables Part 6-2: Detail specification for 75-4 type CATV drop cables - Edition 1.0 2018 IEC 0 1753 62031 LED modules for general lighting Safety specifications - Edition 2.0 2018 IEC 0 1754 60404-13 Magnetic Materials - Part 13: Methods of Measurement of Density, Resistivity and Stacking Factor of Electrical Steel 2018 IEC 0 Sheet and Strip - Edition 2.0 1755 61010-031 Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for 2018 IEC 0 hand-held and hand-manipulated probe assemblies for electrical test and measurement - Edition 2.1; Consolidated Reprint 1756 61869-14 Instrument transformers Part 14: Additional requirements for current transformers for DC applications - Edition 1.0 2018 IEC 0 1757 60061-4 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: Guidelines and general 2018 IEC 0 DATABASE information (DATABASE SNAPSHOT) SNAPSHOT 1758 60335-2-76 Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers - Edition 2018 IEC 0 (REDLINE + 3.0 STA 1759 TS 62257-9-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems 2018 IEC 0 (REDLINE + S Laboratory evaluation of stand-alone renewable energy products for rural electrification - Edition 4.0 1760 62714-1 Engineering data exchange format for use in industrial automation systems engineering Automation markup language Part 2018 IEC 0 1: Architecture and general requirements - Edition 2.0 1761 60794-4-20 Optical fibre cables - Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family 2018 IEC 0 specification for ADSS (all dielectric self-supported) optical cables - Edition 2.0 1762 TR 63114 Electrical steel Reverse bend test method for electrical steel strip and sheet - Edition 1.0 2018 IEC 0 1763 61238-1-2 Compression and mechanical connectors for power cables Part 1-2: Test methods and requirements for insulation piercing 2018 IEC 0 connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors - Edition 1.0 1764 60034-14 Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - 2018 IEC 0 (REDLINE + Measurement, evaluation and limits of vibration severity - Edition 4.0 STAND 1765 60335-2-5 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - Part 2-5: Particular requirements for 2018 IEC 0 AMD 1 CORR dishwashers - Edition 6.1 1 1766 60721-2-4 Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and 2018 IEC 0 (REDLINE + temperature - Edition 2.0 STAN 1767 62631-2-1 Dielectric and resistive properties of solid insulating materials Part 2-1: Relative permittivity and dissipation factor 2018 IEC 0 Technical frequencies (0,1 Hz to 10 MHz) AC methods - Edition 1.0 1768 62899-203 Printed electronics Part 203: Materials Semiconductor ink - Edition 1.0 2018 IEC 0 1769 PAS 63151 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from 2018 IEC 0 hand-held and body-mounted wireless communication devices Vector measurement-based systems (Frequency range of 30 MHz to 6 GHz) - Edition 1770 61010-2-061 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular 2018 IEC 0 (REDLINE + requirements for laboratory atomic spectrometers with thermal atomization and ionization - Edition 4.0 ST 1771 60335-2-75 Household and similar electrical appliances Safety Part 2-75: Particular requirements for commercial dispensing appliances 2018 IEC 0 and vending machines - Edition 3.2; Consolidated Reprint 1772 62386-216 Digital addressable lighting interface Part 216: Particular requirements for control gear Load referencing (device type 15) - 2018 IEC 0 Edition 1.0 1773 60335-2-40 Household and similar electrical appliances Safety Part 2-40: Particular requirements for electrical heat pumps, air- 2018 IEC 0 (REDLINE + conditioners and dehumidifiers - Edition 6.0 STA 1774 63093-6 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power 2018 IEC 0 supplies - Edition 1.0 1775 60695-6-2 Fire hazard testing Part 6-2: Smoke obscuration Summary and relevance of test methods - Edition 2.0 2018 IEC 0 1776 60730-2-9 AMENDMENT 1 Automatic electrical controls Part 2-9: Particular requirements for temperature sensing control - Edition 2018 IEC 0 AMD 1 4.0 1777 62808 Nuclear power plants Instrumentation and control systems important to safety Design and qualification of isolation devices 2018 IEC 0 - Edition 1.1; Consolidated Reprint 1778 61340-6-1 Electrostatics Part 6-1: Electrostatic control for healthcare General requirements for facilities - Edition 1.0 2018 IEC 0 1779 60050-723 AMENDMENT 4 International Electrotechnical Vocabulary (IEV) Part 723: Broadcasting: Sound, television, data - 2018 IEC 0 AMD 4 Edition 1.0 1780 60268-3 Sound system equipment - Part 3: Amplifiers - Edition 5.0 2018 IEC 0 (REDLINE + STANDA 1781 60076-11 Power transformers - Part 11: Dry-type transformers - Edition 2.0 2018 IEC 0 (REDLINE + STAND 1782 62053-22 Electricity metering equipment (A.C.) - Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 2018 IEC 0 CORR 1 0,5 S) - Edition 1.0 1783 60268-4 Sound system equipment - Part 4: Microphones - Edition 6.0 2018 IEC 0 1784 62885-5 Surface cleaning appliances Part 5: High pressure cleaners and steam cleaners for household and commercial use Methods 2018 IEC 0 for measuring performance - Edition 1.0 1785 TS 62257-7-3 Recommendations for renewable energy and hybrid systems for rural electrification - Part 7-3: Generator set - Selection of 2018 IEC 0 generator sets for rural electrification systems - Edition 2.0 1786 62236-5 Railway applications Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations and 2018 IEC 0 apparatus - Edition 3.0 1787 60512-8-3 Connectors for electrical and electronic equipment Tests and measurements Part 8-3: Static load tests (fixed connectors) 2018 IEC 0 Test 8c: Robustness of actuating lever - Edition 2.0 1788 60068-2-69 ENVIRONMENTAL TESTING Part 1: 2-69: Tests Test Te/Tc: Solderability testing of electronic components and printed 2018 IEC 0 CORR 1 boards by the wetting balance (force measurement) - Edition 3.0 1789 60332-3-25 Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically- 2018 IEC 0 mounted bunched wires or cables Category D - Edition 2.0 1790 TR 63158 Equipment for general lighting purposes Objective test method for stroboscopic effects of lighting equipment - Edition 1.0 2018 IEC 0 CORR 1 1791 62715-6-1 Flexible display devices - Part 6-1: Mechanical test methods - Deformation tests - Edition 2.0 2018 IEC 0 (REDLINE + STAN 1792 62055-41 Electricity metering - Payment systems - Part 41: Standard transfer specification (STS) - Application layer protocol for one- 2018 IEC 0 (REDLINE + way token carrier systems - Edition 3.0 STAND 1793 62246-1-1 Reed switches Part 1-1: Generic specification Blank detail specification - Edition 2.0 2018 IEC 0 1794 60974-9 Arc welding equipment Part 9: Installation and use - Edition 2.0 2018 IEC 0 1795 62368-1 Audio/video, information and communication technology equipment Part 1: Safety requirements - Edition 3.0 2018 IEC 0 (REDLINE + STANDA 1796 62888-1 Railway applications Energy measurement on board trains Part 1: General - Edition 1.0 2018 IEC 0 1797 60061-2 AMD Amendment 54 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2018 IEC 0 54 Lampholders - Edition 3.32 1798 62106-3 Radio data system (RDS) VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 3: Usage 2018 IEC 0 and registration of Open Data Applications (ODAs) IEC - Edition 1.0 1799 TS 62903 Ultrasonics Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers 2018 IEC 0 using the self-reciprocity method - Edition 1.0 1800 61784-5-8 Industrial communication networks Profiles Part 5-8: Installation of fieldbuses Installation profiles for CPF 8 - Edition 2.0 2018 IEC 0 1801 62106-2 Radio data system (RDS) VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 2: 2018 IEC 0 Message format: Coding and definitions of RDS features - Edition 1.0 1802 60076-11 Power transformers Part 11: Dry-type transformers - Edition 2.0 2018 IEC 0 1803 61643-352 Components for low-voltage surge protection Part 352: Selection and application principles for telecommunications and 2018 IEC 0 signalling network surge isolation transformers (SITs) - Edition 1.0 1804 60335-2-31 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking 2018 IEC 0 fume extractors - Edition 5.2; Consolidated Reprint 1805 62707-1 LED-binning - Part 1: General requirements and white colour grid intended for automotive applications - Edition 1.1; 2018 IEC 0 Consolidated Reprint 1806 60068-3-5 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature 2018 IEC 0 chambers - Edition 2.0 1807 62888-5 Railway applications Energy measurement on board trains Part 5: Conformance test - Edition 1.0 2018 IEC 0 1808 62899-302-2 Printed electronics Part 302-2: Equipment Inkjet Imaging-based measurement of droplet volume - Edition 1.0 2018 IEC 0 1809 62442-3 Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method 2018 IEC 0 (REDLINE + of measurement to determine the efficiency of controlgear - Edition 2.0 STANDA 1810 61196-6-3 Coaxial communication cables Part 6-3: Detail specification for 75-5 type CATV drop cables - Edition 1.0 2018 IEC 0 1811 60332-3-23 Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically- 2018 IEC 0 (REDLINE + mounted bunched wires or cables Category B - Edition 2.0 STA 1812 62969-2 Semiconductor devices Semiconductor interface for automotive vehicles Part 2: Efficiency evaluation methods of wireless 2018 IEC 0 power transmission using resonance for automotive vehicles sensors - Edition1.0 1813 60974-14 Arc welding equipment - Part 14: Calibration, validation and consistency testing - Edition 1.0 2018 IEC 0 1814 60728-113 Cable networks for television signals, sound signals and interactive services Part 113: Optical systems for broadcast signal 2018 IEC 0 transmissions loaded with digital channels only - Edition 1.0 1815 61290-4-4 Optical amplifiers Test methods Part 4-4: Gain transient parameters Single channel optical amplifiers with gain control - 2018 IEC 0 Edition 1.0 1816 61869-15 Instrument transformers Part 15: Additional requirements for voltage transformers for DC applications - Edition 1.0 2018 IEC 0 1817 TS 62898-2 Microgrids Part 2: Guidelines for operation - Edition 1.0 2018 IEC 0 1818 60335-2-76 Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers - Edition 2018 IEC 0 3.0 1819 60947-4-1 Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters Electromechanical contactors and motor- 2018 IEC 0 (REDLINE + starters - Edition 4.0 STAN 1820 60050-523 NULL 2018 IEC 0 1821 60050-617 NULL 2018 IEC 0 AMD 3 1822 60065 CORR 3 NULL 2018 IEC 0 1823 60095-1 Lead-acid starter batteries Part 1: General requirements and methods of test - Edition 7.0 2018 IEC 0 1824 60268-21 NULL 2018 IEC 0 1825 60335-2-8 Household and similar electrical appliances Safety Part 2-8: Particular requirements for shavers, hair clippers and similar 2018 IEC 0 appliances - Edition 6.1 1826 60335-2-15 Household and similar electrical appliances Safety Part 2-15: Particular requirements for appliances for heating liquids - 2018 IEC 0 Edition 6.1; Consolidated Reprint 1827 60335-2-76 Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers - 2018 IEC 0 CORR 1 Edition 2.2 1828 60364-5-56 Low-voltage electrical installations Part 5-56: Selection and erection of electrical equipment Safety services - Edition 2.0 2018 IEC 0 1829 60404-6 CORR CORRIGENDUM 1 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft 2018 IEC 0 1 metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens - Edition 2.0 1830 60404-9 Magnetic Materials Part 9: Methods of Determination of the Geometrical Characteristics of Magnetic Steel Sheet and Strip 2018 IEC 0 - Edition 1.0 1831 60404-16 NULL 2018 IEC 0 CORR 1 1832 60746-4 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane 2018 IEC 0 covered amperometric sensors - Edition 1.0 1833 60793-1-32 Optical fibres Part 1-32: Measurement methods and test procedures Coating strippability - Edition 2.0 2018 IEC 0 1834 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres - Edition 5.0 2018 IEC 0 1835 60964 Nuclear power plants Control rooms Design - Edition 2.0 2018 IEC 0 1836 61058-2-5 Switches for appliances Part 2-5: Particular requirements for change-over selectors - Edition 2.0 2018 IEC 0 1837 61058-2-6 Switches for appliances Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, 2018 IEC 0 transportable tools and lawn and garden machinery - Edition 1.0 1838 61439-7 NULL 2018 IEC 0 1839 61496-3 Safety of machinery Electro-sensitive protective equipment Part 3: Particular requirements for Active Opto-electronic 2018 IEC 0 Protective Devices responsive to Diffuse Reflection (AOPDDR) - Edition 2.0 1840 61850-8-2 NULL 2018 IEC 0 1841 61935-1-2 NULL 2018 IEC 0 1842 61937-11 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 11: MPEG-4 AAC and its 2018 IEC 0 extensions in LATM/LOAS - Edition 1.0 1843 61967-1 Integrated Circuits - Measurement of Electromagnetic Emissions, 150 kHz to 1 GHz Part 1: General Conditions and 2018 IEC 0 Definitions - Edition 1.0 1844 61970-453 Energy management system application program interface (EMS-API) Part 453: Diagram layout profile - Edition 2.0 2018 IEC 0 1845 62056-8-4 NULL 2018 IEC 0 1846 62149-10 NULL 2018 IEC 0 1847 62351-4 NULL 2018 IEC 0 1848 62464-1 Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters - Edition 2018 IEC 0 1.0 1849 62474 Material declaration for products of and for the electrotechnical industry - Edition 1.0 2018 IEC 0 1850 62660-1 Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing - Edition 1.0 2018 IEC 0 1851 62660-2 Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing - Edition 1.0 2018 IEC 0 1852 62679-2 NULL 2018 IEC 0 1853 62899-201 Printed electronics Part 201: Materials Substrates - Edition 1.0 2018 IEC 0 1854 62908-12-10 NULL 2018 IEC 0 CORR 1 1855 62951-3 NULL 2018 IEC 0 1856 63011-1 NULL 2018 IEC 0 1857 63011-2 NULL 2018 IEC 0 1858 63033-2 NULL 2018 IEC 0 1859 GUIDE 116 Guidelines for safety related risk assessment and risk reduction for low voltage equipment - Edition 1.0; Includes Access to 2018 IEC 0 Additional Content 1860 IEC-IEEE NULL 2018 IEC 0 60255-118-1 1861 TR 60601-4-3 Medical electrical equipment - Part 4-3: Guidance and interpretation - Considerations of unaddressed safety aspects in the 2018 IEC 0 third edition of IEC 60601-1 and proposals for new requirements - Edition 1.0 1862 TR 62977-2-5 NULL 2018 IEC 0 1863 TR 63191 NULL 2018 IEC 0 1864 TS 61200-101 NULL 2018 IEC 0 1865 TS 61994-4-1 Piezoelectric and dielectric devices for frequency control and selection Glossary Part 4-1: Piezoelectric materials 2018 IEC 0 Synthetic quartz crystal - Edition 2.0 1866 TS 61994-4-4 Piezoelectric and dielectric devices for frequency control and selection Glossary Part 4-4: Materials Materials for surface 2018 IEC 0 acoustic wave (SAW) devices - Edition 2.0 1867 TS 62312-1-1 Guideline for synchronization of audio and video Part 1-1: Measurement methods for synchronization of audio and video 2018 IEC 0 equipment and systems General - Edition 1.0 1868 TS 62312-2 Guideline for synchronization of audio and video Part 2: Methods for synchronization of audio and video systems - Edition 2018 IEC 0 1.0 1869 TS 62351-100-1 NULL 2018 IEC 0 1870 TS 62939-2 NULL 2018 IEC 0 1871 TS 63042-301 NULL 2018 IEC 0 1872 60505 CORR 1 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS - Edition 4.0 2017 IEC 0 1873 TS 60695-1-14 Fire hazard testing Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and 2017 IEC 0 fire in low voltage electrotechnical products - Edition 1.0 1874 60793-1-60 Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length - Edition 1.0 2017 IEC 0 1875 60335-2-4 Household and similar electrical appliances Safety Part 2-4: Particular requirements for spin extractors - Edition 6.2; 2017 IEC 0 Consolidated Reprint 1876 60601-2-63 Medical electrical equipment Part 2-63: Particular requirements for the basic safety and essential performance of dental 2017 IEC 0 extra-oral X-ray equipment - Edition 1.1; Consolidated Reprint 1877 60079-18 Explosive atmospheres Part 18: Equipment protection by encapsulation â__mâ__ - Edition 4.1; Consolidated Reprint 2017 IEC 0 1878 62133-1 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed 2017 IEC 0 secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems - Edition 1.0 1879 61391-1 Ultrasonics Pulse-echo scanners Part 1: Techniques for calibrating spatial measurement systems and measurement of 2017 IEC 0 system point-spread function response - Edition 1.1; Consolidated Reprint 1880 62943 Visible light beacon system for multimedia applications - Edition 1.0 2017 IEC 0 1881 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements - 2017 IEC 0 Edition 3.1; Consolidated Reprint 1882 TS 62282-7-1 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) - 2017 IEC 0 Edition 2.0 1883 62657-1 Industrial communication networks Wireless communication networks Part 1: Wireless communication requirements and 2017 IEC 0 spectrum considerations - Edition 1.0 1884 60747-16-3 Semiconductor devices Part 16-3: Microwave integrated circuits Frequency converters - Edition 1.2; Consolidated Reprint 2017 IEC 0 1885 61084-2-1 Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Particular requirements Cable 2017 IEC 0 trunking systems and cable ducting systems intended for mounting on walls and ceilings - Edition 2.0 1886 61191-4 Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies - Edition 3.0 2017 IEC 0 1887 61010-2-030 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Particular 2017 IEC 0 (REDLINE + requirements for equipment having testing and or measuring circuits - Edition 2.0 ST 1888 60050-531 AMENDMENT 1 International Electrotechnical Vocabulary Chapter 531: Electronic Tubes - Edition 1.0 2017 IEC 0 AMD 1 1889 60034-1 Rotating electrical machines Part 1: Rating and performance - Edition 13.0 2017 IEC 0 (REDLINE + STANDA 1890 62957-1 Radiation protection instrumentation Semi-empirical method for performance evaluation of detection and radionuclide 2017 IEC 0 identification Part 1: Performance evaluation of the instruments, featuring radionuclide identification in static mode - Edition 1.0 1891 60068-2-58 Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization 2017 IEC 0 and to soldering heat of surface mounting devices (SMD) - Edition 4.1; Consolidated Reprint 1892 62150-5 Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of 2017 IEC 0 tuneable transmitters - Edition 1.0 1893 60079-14 INT 1 EXPLOSIVE ATMOSPHERES Part 14: Electrical installations design, selection and erection - Edition 5.0 2017 IEC 0 1894 TR 60601-4-1 Medical electrical equipment - Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical 2017 IEC 0 systems employing a degree of autonomy - Edition 1.0 1895 60730-2-15 Automatic electrical controls Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level 2017 IEC 0 sensing controls - Edition 3.0 1896 62448 Multimedia systems and equipment Multimedia E-publishing and E-books Generic format for E-publishing - Edition 4.0 2017 IEC 0 (REDLINE + STANDARD 1897 62802 Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high- 2017 IEC 0 frequency radio on fibre (RoF) systems - Edition 1.0 1898 61010-2-201 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-201: Particular 2017 IEC 0 requirements for control equipment - Edition 2.0 1899 61672-2 Electroacoustics Sound level meters Part 2: Pattern evaluation tests - Edition 2.1 Consolidated Reprint 2017 IEC 0 1900 62933-2-1 Electrical energy storage (EES) systems Part 2-1: Unit parameters and testing methods General specification - Edition 1.0 2017 IEC 0 1901 TR 61282-15 Fibre optic communication system design guides Part 15: Cable plant and link Testing multi-fibre optic cable plant 2017 IEC 0 terminated with MPO connectors - Edition 1.0 1902 62321-8 Determination of certain substances in electrotechnical products Part 8: Phthalates in polymers by gas chromatography- 2017 IEC 0 mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) - Edition 1. 1903 60335-2-36 Household and similar electrical appliances Safety Part 2-36: Particular requirements for commercial electric cooking 2017 IEC 0 ranges, ovens, hobs and hob elements - Edition 6.0 1904 60061-2 AMD Amendment 52 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2017 IEC 0 52 Lampholders - Edition 3.32 1905 TR 62453-51- Field device tool (FDT) interface specification Part 51-90: Communication implementation for common object model IEC 2017 IEC 0 90 61784 CPF 9 - Edition 1.0 1906 62341-6-1 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters - 2017 IEC 0 (REDLINE + Edition 2.0 STAN 1907 TR 61000-2-5 Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic 2017 IEC 0 environments - Edition 3.0 1908 62841-4-2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 4-2: Particular 2017 IEC 0 requirements for hedge trimmers - Edition 1.0 1909 PAS 63083 Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices - Edition 1.0 2017 IEC 0 1910 60793-1-61 Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk - Edition 1.0 2017 IEC 0 1911 60335-2-58 Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashing 2017 IEC 0 (REDLINE + machines - Edition 4.0 STA 1912 62343 Dynamic modules General and guidance - Edition 2.0 2017 IEC 0 1913 62604-2 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Part 2: Guidelines for the use - 2017 IEC 0 Edition 2.0 1914 80369-5 CORR Small bore connectors for liquids and gases in healthcare applications Part 5: Connectors for limb cuff inflation 2017 IEC 0 1 applications - Edition 1.0 1915 63044-5-2 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-2: EMC 2017 IEC 0 requirements for HBES/BACS used in residential, commercial and light-industrial environments - Edition 1.0 1916 62766-5-2 Consumer terminal function for access to IPTV and open internet multimedia services - Part 5-2: Web standards TV profile 2017 IEC 0 - Edition 1.0 1917 61347-1 Lamp controlgear - Part 1: General and safety requirements - Edition 3.1; Consolidated Reprint 2017 IEC 0 1918 63005-1 Event video data recorder for road vehicle accidents Part 1: Basic requirements - Edition 1.0 2017 IEC 0 1919 62321-4 Determination of certain substances in electrotechnical products Part 4: Mercury in polymers, metals and electronics by 2017 IEC 0 CV-AAS, CV-AFS, ICP-OES and ICP-MS - Edition 1.1; Consolidated Reprint 1920 60050-723 AMENDMENT 3 International electrotechnical vocabulary Part 723: Broadcasting: Sound, television, data - Edition 1.0 2017 IEC 0 AMD 3 1921 60730-2-5 Automatic electrical controls Part 2-5: Particular requirements for automatic electrical burner control systems - Edition 4.1 2017 IEC 0 1922 62715-5-3 Flexible display devices - Part 5-3: Visual assessment of image quality and defects - Edition 1.0 2017 IEC 0 1923 TR 61131-8 Industrial-process measurement and control - Programmable controllers - Part 8: Guidelines for the application and 2017 IEC 0 implementation of programming languages - Edition 3.0 1924 60317-69 Specifications for particular types of winding wires Part 69: Polyester or polyesterimide overcoated with polyamide-imide 2017 IEC 0 enamelled rectangular aluminium wire, class 220 - Edition 1.0 1925 62561-4 Lightning protection system components (LPSC) Part 4: Requirements for conductor fasteners - Edition 2.0 2017 IEC 0 1926 62715-5-1 Flexible display devices - Part 5-1: Measuring methods of optical performance - Edition 1.0 2017 IEC 0 1927 TR 62981 Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet 2017 IEC 0 test method and Epstein test method - Edition 1.0 1928 60317-71 Specifications for particular types of winding wires Part 71: Polyester glass-fibre wound fused and resin or varnish 2017 IEC 0 impregnated, bare or enamelled round copper wire, temperature index 180 - Edition 1.0 1929 TR 61328 Live working - Guidelines for the installation of transmission and distribution line conductors and earth wires - Stringing 2017 IEC 0 equipment and accessory items - Edition 3.0 1930 62828-1 Reference conditions and procedures for testing industrial and process measurement transmitters Part 1: General procedures 2017 IEC 0 for all types of transmitters - Edition 1.0 1931 61400-12-1 Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines - 2017 IEC 0 Edition 2.0 1932 TS 60076-20 Power transformers - Part 20: Energy efficiency - Edition 1.0 2017 IEC 0 1933 60811-202 Electric and optical fibre cables Test methods for non-metallic materials Part 202: General tests Measurement of thickness 2017 IEC 0 of non-metallic sheath - Edition 1.1; Consolidated Reprint 1934 60404-8-8 Magnetic materials Part 8-8: Specifications for individual materials Thin electrical steel strip and sheet for use at medium 2017 IEC 0 frequencies - Edition 2.0 1935 60068-2-69 Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by 2017 IEC 0 the wetting balance (force measurement) method - Edition 3.0 1936 60335-2-50 Household and similar electrical appliances Safety Part 2-50: Particular requirements for commercial electric bains-marie - 2017 IEC 0 Edition 4.2; Consolidated Reprint 1937 62040-1 Uninterruptible power systems (UPS) Part 1: Safety requirements - Edition 2.0; â__This Extended version of IEC 62040- 2017 IEC 0 1:2017 includes the provisions of the general rules of IEC 62477-1:2012â__ 1938 62486 Railway applications Current collection systems Technical criteria for the interaction between pantograph and overhead 2017 IEC 0 contactline (to achieve free access) - Edition 2.0 1939 CISPR TR 18-2 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement 2017 IEC 0 (REDLINE + and procedure for determining limits - Edition 3.0 1940 60695-11-2 Fire hazard testing Part 11-2: Test flames 1 kW nominal pre-mixed flame Apparatus, confirmatory test arrangement and 2017 IEC 0 guidance - Edition 3.0 1941 60051-6 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for 2017 IEC 0 ohmmeters (impedance meters) and conductance meters - Edition 5.0 1942 62927 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) Electrical testing - Edition 1.0 2017 IEC 0 1943 62820-2 Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) - Edition 1.0 2017 IEC 0 1944 TS 61586 Estimation of the reliability of electrical connectors - Edition 2.0 2017 IEC 0 1945 60825-1 INT 1 Safety of laser products Part 1: Equipment classification and requirements - Edition 3.0 2017 IEC 0 1946 62841-3-14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-14: Particular 2017 IEC 0 requirements for transportable drain cleaners - Edition 1.0 1947 TS 62370 Electroacoustics Instruments for the measurement of sound intensity Electromagnetic and electrostatic compatibility 2017 IEC 0 requirements and test procedures - Edition 1.1 Consolidated Reprint 1948 62481-4 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability 2017 IEC 0 solutions - Edition 2.0 1949 61754-7-2 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 7-2: Type MPO connector 2017 IEC 0 family Two fibre rows - Edition 1.0 1950 60335-2-82 Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and 2017 IEC 0 personal service machines - Edition 3.0 1951 60050-821 International electrotechnical vocabulary Part 821: Signalling and security apparatus for railways - Edition 2.0 2017 IEC 0 1952 60287-2-3 Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels - 2017 IEC 0 Edition 1.0 1953 61326-3-1 Electrical equipment for measurement, control and laboratory use EMC requirements Part 3-1: Immunity requirements for 2017 IEC 0 safety-related systems and for equipment intended to perform safety-related functions (functional safety) General industrial applications 1954 60730-2-14 Automatic electrical controls - Part 2-14: Particular requirements for electric actuators - Edition 2.0 2017 IEC 0 (REDLINE + STA 1955 63013 LED packages Long-term luminous and radiant flux maintenance projection 2017 IEC 0 1956 60793-1-48 Optical fibres Part 1-48: Measurement methods and test procedures Polarization mode dispersion - Edition 3.0 2017 IEC 0 1957 62133-2 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed 2017 IEC 0 secondary cells, and for batteries made from them, for use in portable applications Part 2: Lithium systems - Edition 1.0 1958 CISPR 16-1-2 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and 2017 IEC 0 immunity measuring apparatus Coupling devices for conducted disturbance measurements - Edition 2.1 Consolidated Reprint 1959 PAS 63088 Smart manufacturing Reference architecture model industry 4.0 (RAMI4.0) - Edition 1.0 2017 IEC 0 1960 61010-2-034 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular 2017 IEC 0 requirements for measurement equipment for insulation resistance and test equipment for electric strength - Edition 1.0 1961 TR 62343-6-4 Dynamic modules - Part 6-4: Design guides - Reconfigurable optical add/drop multiplexer - Edition 1.0 2017 IEC 0 1962 62827-2 Wireless power transfer Management Part 2: Multiple device control management - Edition 1.0 2017 IEC 0 1963 60335-2-34 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-34: Particular requirements for 2017 IEC 0 CORR 1 motorcompressors - Edition 5.0 1964 60747-16-4 Semiconductor devices Part 16-4: Microwave integrated circuits Switches - Edition 1.2; Consolidated Reprint 2017 IEC 0 1965 61084-2-2 Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable 2017 IEC 0 trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor - Edition 2.0 1966 61010-2-030 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Particular 2017 IEC 0 requirements for equipment having testing or measuring circuits - Edition 2.0 1967 60794-1-2 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance - Edition 4.0 2017 IEC 0 1968 60050-551-20 AMENDMENT 1 International Electrotechnical Vocabulary Part 551-20: Power electronics - Harmonic analysis - Edition 2017 IEC 0 AMD 1 1.0 1969 60034-1 Rotating electrical machines Part 1: Rating and performance - Edition 13.0 2017 IEC 0 1970 60077-2 Railway applications Electric equipment for rolling stock Part 2: Electrotechnical components General rules - Edition 2.0 2017 IEC 0 (REDLINE + STANDA 1971 TS 62229 Multimedia systems and equipment - Multimedia e-publishing and e-book - Conceptual model for multimedia e-publishing 2017 IEC 0 - Edition 2.0 1972 61076-3-104 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, 2017 IEC 0 shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz - Edition 3.0 1973 61071 Capacitors for power electronics - Edition 2.0 2017 IEC 0 (REDLINE + STANDARD 1974 62448 Multimedia systems and equipment Multimedia e-publishing and e-books Generic format for E-publishing - Edition 4.0 2017 IEC 0 1975 60695-1-30 Fire hazard testing Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Preselection testing 2017 IEC 0 process General guidelines - Edition 3.0 1976 62948 Industrial networks Wireless communication network and communication profiles WIA-FA - Edition 1.0 2017 IEC 0 1977 62969-1 Semiconductor devices Semiconductor interface for automotive vehicles Part 1: General requirements of power interface 2017 IEC 0 for automotive vehicle sensors - Edition 1.0 1978 60309-5 Plugs, socket-outlets and couplers for industrial purposes Part 5: Dimensional compatibility and interchangeability 2017 IEC 0 requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) - Edition 1.0 1979 61386-1 Conduit systems for cable management Part 1: General requirements - Edition 2.1; Consolidated Reprint 2017 IEC 0 1980 62830-3 Semiconductor devices Semiconductor devices for energy harvesting and generation Part 3: Vibration based 2017 IEC 0 electromagnetic energy harvesting - Edition 1.0 1981 60335-2-37 Household and similar electrical appliances Safety Part 2-37: Particular requirements for commercial electric doughnut 2017 IEC 0 fryers and deep fat fryers - Edition 6.0 1982 60061-3 AMD Amendment 53 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: 2017 IEC 0 53 Gauges - Edition 3.44 1983 TR 62453-51- Field device tool (FDT) interface specification Part 51-150: Communication implementation for common object model IEC 2017 IEC 0 150 61784 CPF 15 - Edition 1.0 1984 63147 Criteria for accident monitoring instrumentation for nuclear power generating stations - Edition 1.0 2017 IEC 0 1985 60335-2-58 Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashing 2017 IEC 0 machines - Edition 4.0 1986 TR 62543 High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC) - Edition 1.2; 2017 IEC 0 Consolidated Reprint 1987 TS 62862-1-2 Solar thermal electric plants Part 1-2: General Creation of annual solar radiation data set for solar thermal electric (STE) 2017 IEC 0 plant simulation 1988 61951-2 Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary sealed cells and batteries for 2017 IEC 0 portable applications Part 2: Nickel-metal hydride - Edition 4.0 1989 63044-5-3 Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 5-3: EMC 2017 IEC 0 requirements for HBES/BACS used in industrial environments - Edition 1.0 1990 62766-6 Consumer terminal function for access to IPTV and open internet multimedia services Part 6: Procedural application 2017 IEC 0 environment - Edition 1.0 1991 60598-2-4 Luminaires Part 2-4: Particular requirements Portable general purpose luminaires - Edition 3.0 2017 IEC 0 1992 62341-6-3 Organic light emitting diode (OLED) displays Part 6-3: Measuring methods of image quality - Edition 2.0 2017 IEC 0 1993 61558-1 Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests - 2017 IEC 0 (REDLINE + Edition 3.0 STANDA 1994 TR 63099-1 Transmitting equipment for radiocommunication - Radio-over-fibretechnologies for electromagnetic-field measurement - 2017 IEC 0 Part 1: Radio-over-fibre technologies for antenna measurement - Edition 1.0 1995 TR 62396-6 Process management for avionics Atmospheric radiation effects Part 6: Extreme space weather Potential impact on the 2017 IEC 0 avionics environment and electronics - Edition 1.0 1996 60050-726 AMENDMENT 2 International electrotechnical vocabulary Part 726: Transmission lines and waveguides - Edition 1.0 2017 IEC 0 AMD 2 1997 62090 Product package labels for electronic components using bar code and twodimensional symbologies - Edition 2.0 2017 IEC 0 1998 60050-617 AMENDMENT 2 International electrotechnical vocabulary Part 617: Organization/Market of electricity - Edition 1.0 2017 IEC 0 AMD 2 1999 62766-1 Consumer terminal function for access to IPTV and open internet multimedia services - Part 1: General - Edition 1.0 2017 IEC 0 2000 TR 61869-100 Instrument transformers - Part 100: Guidance for application of current transformers in power system protection - Edition 2017 IEC 0 1.0 2001 62561-5 Lightning protection system components (LPSC) Part 5: Requirements for earth electrode inspection housings and earth 2017 IEC 0 electrode seals - Edition 2.0 2002 62909-1 Bi-directional grid-connected power converters Part 1: General requirements - Edition 1.0 2017 IEC 0 2003 60034-27-1 Rotating electrical machines Part 27-1: Off-line partial discharge measurements on the winding insulation - Edition 1.0 2017 IEC 0 2004 TR 63061 Adjusted volume calculation for refrigerating appliances - Edition 1.0 2017 IEC 0 2005 60669-1 Switches for household and similar fixed electrical installations Part 1: General requirements - Edition 4.0 2017 IEC 0 (REDLINE + STANDA 2006 60099-8 Surge arresters Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and 2017 IEC 0 (REDLINE + distribution lines of a.c. systems above 1 kV - Edition 2.0 STANDA 2007 61340-5-1 ELECTROSTATICS Part 5-1: Protection of electronic devices from electrostatic phenomena General requirements - 2017 IEC 0 CORR 1 Edition 2.0 2008 62056-8-6 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for 2017 IEC 0 neighbourhood networks - Edition 1.0 2009 61724-1 Photovoltaic system performance Part 1: Monitoring - Edition 1.0 2017 IEC 0 2010 60904-1-1 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices 2017 IEC 0 - Edition 1.0 2011 62807-1 Hybrid telecommunication cables Part 1: Generic specification - Edition 1.0 2017 IEC 0 2012 60118-4 Electroacoustics Hearing aids Part 4: Induction-loop systems for hearing aid purposes System performance requirements - 2017 IEC 0 Edition 3.1; Consolidated Reprint 2013 60238 Edison screw lampholders - Edition 9.1 Consolidated Reprint 2017 IEC 0 2014 60598-2-17 Luminaires Part 2-17: Particular requirements Luminaires for stage lighting, television and film studios (outdoor and 2017 IEC 0 indoor) - Edition 2.0 2015 60811-401 Electric and optical fibre cables Test methods for non-metallic materials Part 401: Miscellaneous tests Thermal ageing 2017 IEC 0 methods Ageing in an air oven - Edition 1.1; Consolidated Reprint 2016 80601-2-59 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening 2017 IEC 0 thermographs for human febrile temperature screening - Edition 2.0 2017 61280-4-4 Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion 2017 IEC 0 measurement for installed links - Edition 2.0 2018 61000-4-15 INT ELECTROMAGNETIC COMPATIBILITY (EMC) Part 4-15: Testing and measurement techniques Flickermeter 2017 IEC 0 1 Functional and design specifications - Edition 2.0 2019 60335-2-99 Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods - 2017 IEC 0 Edition 1.1; Consolidated Reprint 2020 TR 62978 HVDC installations Guidelines on asset management - Edition 1.0 2017 IEC 0 2021 62899-302-1 Printed electronics Part 302-1: Equipment Inkjet Imaging based measurement of jetting speed - Edition 1.0 2017 IEC 0 2022 CISPR TR 18-2 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement 2017 IEC 0 and procedure for determining limits - Edition 3.0 2023 62884-1 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 1: Basic methods for the measurement 2017 IEC 0 - Edition 1.0 2024 60051-7 Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for 2017 IEC 0 multi-function instruments - Edition 5.0 2025 TS 62933-5-1 Electrical energy storage (EES) systems Part 5-1: Safety considerations for grid-integrated EES systems General 2017 IEC 0 specification - Edition 1.0 2026 62822-3 Electric welding equipment Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 2017 IEC 0 GHz) Part 3: Resistance welding equipment - Edition 1.0 2027 62714-3 Engineering data exchange format for use in industrial automation systems engineering Automation markup language Part 2017 IEC 0 3: Geometry and kinematics - Edition 1.0 2028 60826 Overhead transmission lines - Design criteria - Edition 4.0 2017 IEC 0 (REDLINE + STANDARD 2029 60825-1 INT 2 Safety of laser products Part 1: Equipment classification and requirements - Edition 3.0 2017 IEC 0 2030 62841-4-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety - Part 4-1: Particular 2017 IEC 0 requirements for chain saws - Edition 1.0 2031 60335-2-39 Household and similar electrical appliances Safety Part 2-39: Particular requirements for commercial electric multi-purpose 2017 IEC 0 cooking pans - Edition 6.1; Consolidated Reprint 2032 62481-6-1 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 6-1: Remote User 2017 IEC 0 Interface - HTML5 - Edition 1.0 2033 61869-10 Instrument transformers Part 10: Additional requirements for low-power passive current transformers - Edition 1.0 2017 IEC 0 2034 60755 General safety requirements for residual current operated protective devices - Edition 1.0 2017 IEC 0 2035 60335-2-47 Household and similar electrical appliances Safety Part 2-47: Particular requirements for commercial electric boiling pan - 2017 IEC 0 Edition 4.2; Consolidated Reprint 2036 61326-3-2 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements 2017 IEC 0 REDLINE + for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial STAND applications w 2037 60730-2-14 Automatic electrical controls Part 2-14: Particular requirements for electric actuators - Edition 2.0 2017 IEC 0 2038 60364-7-721 Low-voltage electrical installations Part 7-721: Requirements for special installations or locations Electrical installations in 2017 IEC 0 caravans and motor caravans - Edition 2.0 2039 PAS 63124 Tumble dryers for commercial use Methods for measuring the performance - Edition 1.0 2017 IEC 0 2040 61131-2 Industrial-process measurement and control Programmable controllers Part 2: Equipment requirements and tests - Edition 2017 IEC 0 4.0 2041 62287-2 Maritime navigation and radiocommunication equipment and systems Class B shipborne equipment of the automatic 2017 IEC 0 identification system (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques - Edition 2.0 2042 60068-2-52 Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) - Edition 3.0 2017 IEC 0 (REDLINE + STA 2043 TS 62607-3-2 Nanomanufacturing Key control characteristics Part 3-2: Luminescent nanoparticles Determination of mass of quantum dot 2017 IEC 0 dispersion - Edition 1.0 2044 62433-2 EMC IC modelling Part 2: Models of integrated circuits for EMI behavioural simulation Conducted emissions modelling 2017 IEC 0 (ICEM-CE) - Edition 2.0 2045 62952-3 Power sources for a wireless communication device Part 3: Generic energy harvesting adapter module - Edition 1.0 2017 IEC 0 2046 60603-7-81 Connectors for electronic equipment Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data 2017 IEC 0 CORR 1 transmissions with frequencies up to 2 000 MHz - Edition 1.0 2047 60793-1-33 Optical Fibres - Part 1-33: Measurement Methods and Test Procedures - Stress Corrosion Susceptibility - Edition 2.0 2017 IEC 0 2048 61970-452 Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model 2017 IEC 0 profiles - Edition 3.0 2049 60050-103 AMENDMENT 1 International electrotechnical vocabulary Part 103: Mathematics Functions - Edition 1.0 2017 IEC 0 AMD 1 2050 61557-9 CORR Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2017 IEC 0 2 or monitoring of protective measures Part 9: Equipment for insulation fault location in IT systems - Edition 3.0 2051 61300-2-9 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - 2017 IEC 0 Shock - Edition 3.0 2052 60050-702 AMENDMENT 3 International Electrotechnical Vocabulary Chapter 702: Oscillations, signals and related devices - 2017 IEC 0 AMD 3 Edition 1.0 2053 60317-72 Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish 2017 IEC 0 impregnated, bare or enamelled round copper wire, temperature index 200 - Edition 1.0 2054 60077-2 Railway applications Electric equipment for rolling stock Part 2: Electrotechnical components General rules - Edition 2.0 2017 IEC 0 2055 TR 62453-51- Field device tool (FDT) interface specification - Part 51-10: Communication implementation for common object model - 2017 IEC 0 10 IEC 61784 CPF 1 - Edition 1.0 2056 60570 Electrical supply track systems for luminaires - Edition 4.1; Consolidated Reprint 2017 IEC 0 2057 61076-3-122 Connectors for electrical and electronic equipment Product requirements Part 3-122: Detail specification for 8-way, 2017 IEC 0 shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments - Edition 1.0 2058 61071 Capacitors for power electronics - Edition 2.0 2017 IEC 0 2059 62489-1 Electroacoustics Audio-frequency induction loop systems for assisted hearing Part 1: Methods of measuring and specifying 2017 IEC 0 the performance of system components - Edition 1.2; Consolidated Reprint 2060 61076-2-113 Connectors for electronic equipment Product requirements Part 2-113: Circular connectors Detail specification for 2017 IEC 0 connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz - Edition 1.0 2061 60068-2-18 Environmental testing - Part 2-18: Tests - Test R and guidance: Water - Edition 3.0 2017 IEC 0 (REDLINE + STA 2062 63024 Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar 2017 IEC 0 uses - Edition 1.0 2063 60335-2-95 Household and similar electrical appliances Safety Part 2-95: Particular requirements for drives for vertically moving 2017 IEC 0 garage doors for residential use - Edition 3.2 Consolidated Reprint 2064 GUIDE 118 Inclusion of energy efficiency aspects in electrotechnical publications - Edition 1.0 2017 IEC 0 2065 60364-7-708 Low-voltage electrical installations Part 7-708: Requirements for special installations or locations Caravan parks, camping 2017 IEC 0 parks and similar locations - Edition 3.0 2066 62561-3 Lightning protection system components (LPSC) Part 3: Requirements for isolating spark gaps (ISG) - Edition 2.0 2017 IEC 0 2067 TR 63123 Nuclear power plants Instrumentation, control and electrical power systems Guidance for the application of IEC 2017 IEC 0 63147:2017/IEEE Std 497â__-2016 in the IAEA / IEC framework - Edition 1.0 2068 60335-2-60 Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool 2017 IEC 0 (REDLINE + spas - Edition 4.0 STA 2069 60077-1 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules - Edition 2017 IEC 0 (REDLINE + 2.0 STANDA 2070 62586-1 Power quality measurement in power supply systems Part 1: Power quality instruments (PQI) - Edition 2.0 2017 IEC 0 2071 TS 62862-1-3 Solar thermal electric plants Part 1-3: General Data format for meteorological data sets - Edition 1.0 2017 IEC 0 2072 TR 62343-6-10 Dynamic modules Part 6-10: Design guide Intermediate controller for multiple dynamic module systems - Edition 1.0 2017 IEC 0 2073 60793-2-10 Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres - Edition 6.0 2017 IEC 0 2074 62766-7 Consumer terminal function for access to IPTV and open internet multimedia services - Part 7: Authentication, content 2017 IEC 0 protection and service protection - Edition 1.0 2075 60623 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic 2017 IEC 0 (REDLINE + rechargeable single cells - Edition 5.0 STANDARD 2076 61000-3-11 Electromagnetic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations and flicker in 2017 IEC 0 (REDLINE + public low-voltage supply systems Equipment with rated current â_¤75 A and subject to conditional connection - Edition STA 2.0 2077 TS 60079-43 Explosive atmospheres Part 43: Equipment in adverse service conditions - Edition 1.0 2017 IEC 0 2078 60335-2-12 Household and similar electrical appliances Safety Part 2-12: Particular requirements for warming plates and similar 2017 IEC 0 appliances - Edition 5.2 Consolidated Reprint 2079 62359 Ultrasonics Field characterization Test methods for the determination of thermal and mechanical indices related to medical 2017 IEC 0 diagnostic ultrasonic fields - Edition 2.1; Consolidated Reprint 2080 PAS 62257-10 Recommendations for renewable energy and hybrid systems for rural electrification Part 10: Silicon solar module visual 2017 IEC 0 inspection guide - Edition 1.0 2081 TR 62396-7 Process management for avionics Atmospheric radiation effects Part 7: Management of single event effects (SEE) analysis 2017 IEC 0 process in avionics design - Edition 1.0 2082 60061-1 AMD Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps - Edition 2017 IEC 0 57 3.35 2083 62899-301-1 Printed electronics - Part 301-1: Equipment - Contact printing - Rigid master - Measurement method of plate master 2017 IEC 0 external dimension - Edition 1.0 2084 CISPR/TR 16- Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and 2017 IEC 0 4-4 limit modelling Statistics of complaints and a model for the calculation of limits for the protection of radio services - Edition 2.1; 2085 60335-2-43 Household and similar electrical appliances Safety Part 2-43: Particular requirements for clothes dryers and towel rails - 2017 IEC 0 Edition 4.0 2086 62047-27 Semiconductor devices - Micro-electromechanical devices Part 27: Bond strength test for glass frit bonded structures using 2017 IEC 0 micro-chevrontests (MCT) - Edition 1.0 2087 62817 Photovoltaic systems - Design qualification of solar trackers - Edition 1.1; Consolidated Reprint 2017 IEC 0 2088 60079-0 Explosive atmospheres Part 0: Equipment General requirements - Edition 7.0 2017 IEC 0 (REDLINE + STANDA 2089 TR 63090 Dimensional tolerances of ferrite cores - Edition 1.0 2017 IEC 0 2090 62733 CORR 1 Programmable components in electronic lamp controlgear General and safety requirements - Edition 1.0 2017 IEC 0 2091 60669-1 Switches for household and similar fixed electrical installations Part 1: General requirements - Edition 4.0 2017 IEC 0 2092 60099-8 Surge arresters Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and 2017 IEC 0 distribution lines of a.c. systems above 1 kV - Edition 2.0 2093 60137 Insulated bushings for alternating voltages above 1 000 V - Edition 7.0 2017 IEC 0 (REDLINE + STANDARD 2094 62282-4-102 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods - 2017 IEC 0 Edition 1.0 2095 61800-9-1 Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power 2017 IEC 0 electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using 2096 60904-8-1 Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices - Edition 2017 IEC 0 1.0 2097 63049 Terrestrial photovoltaic (PV) systems Guidelines for effective quality assurance in PV systems installation, operation and 2017 IEC 0 maintenance - Edition 1.0 2098 60793-1-45 Optical fibres Part 1-45: Measurement methods and test procedures Mode field diameter - Edition 2.0 2017 IEC 0 (REDLINE + STA 2099 62341-6-1 Organic light emitting diode (OLED) displays Part 6-1: Measuring methods of optical and electro-optical parameters - 2017 IEC 0 Edition 2.0 2100 60335-2-53 Household and similar electrical appliances Safety Part 2-53: Particular requirements for sauna heating appliances and 2017 IEC 0 infrared cabins - Edition 4.1: Consolidated Reprint 2101 60601-2-75 Medical electrical equipment Part 2-75: Particular requirements for the basic safety and essential performance of 2017 IEC 0 photodynamic therapy and photodynamic diagnosis equipment - Edition 1.0 2102 60811-410 Electric and optical fibre cables Test methods for non-metallic materials Part 410: Miscellaneous tests Test method for 2017 IEC 0 copper-catalyzed oxidative degradation of polyolefin insulated conductors - Edition 1.1; Consolidated Reprint 2103 61951-1 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for 2017 IEC 0 portable applications - Part 1: Nickel-cadmium - Edition 4.0 2104 TS 80004-9 Nanotechnologies Vocabulary Part 9: Nano-enabled electrotechnical products and systems - Edition 1.0 2017 IEC 0 2105 61169-58 Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - 2017 IEC 0 type SBMA) - Edition 1.0) _خ CORR 1 Characteristic impedance 50 2106 TS 60479-2 Effects of current on human beings and livestock Part 2: Special aspects - Edition 4.0 2017 IEC 0 (REDLINE + STA 2107 60728-12 Cable networks for television signals, sound signals and interactive services - Part 12: Electromagnetic compatibility of 2017 IEC 0 systems - Edition 2.0 2108 62986 Plugs, socket-outlets and couplers with arcuate contacts - Edition 1.0 2017 IEC 0 2109 62979 Photovoltaic modules Bypass diode Thermal runaway test - Edition 1.0 2017 IEC 0 2110 CISPR TR 18-3 Radio interference characteristics of overhead power lines and high-voltage equipment Part 3: Code of practice for 2017 IEC 0 (REDLINE + minimizing the generation of radio noise - Edition 3.0 2111 62908-12-10 Touch and interactive displays Part 12-10: Measurement methods of touch displays Touch and electrical performance - 2017 IEC 0 Edition 1.0 2112 60051-8 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for 2017 IEC 0 accessories - Edition 5.0 2113 TS 62993 Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a 2017 IEC 0 rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC - Edition 1.0 2114 60838-1 Miscellaneous lampholders Part 1: General requirements and tests - Edition 5.1; Consolidated Reprint 2017 IEC 0 2115 62908-1-2 Touch and interactive displays Part 1-2: Generic Terminology and letter symbols - Edition 1.0 2017 IEC 0 2116 62325-451-3 Framework for energy market communications Part 451-3: Transmission capacity allocation business process (explicit or 2017 IEC 0 implicit auction) and contextual models for European market - Edition 1.1; Consolidated Reprint 2117 TS 62720 Identification of units of measurement for computer-based processing - Edition 2.0 2017 IEC 0 2118 60826 Overhead transmission lines - Design criteria - Edition 4.0 2017 IEC 0 2119 62056-8-5 ELECTRICITY METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 8-5: Narrow-band OFDM G3-PLC 2017 IEC 0 CORR 1 communication profile for neighbourhood networks CORRIGENDUM 1 - Edition 1.0 2120 TR 63133 Semiconductor devices - Scan based ageing level estimation for semiconductor devices - Edition 1.0 2017 IEC 0 2121 60335-2-42 Household and similar electrical appliances Safety Part 2-42: Particular requirements for commercial electric forced 2017 IEC 0 convection ovens, steam cookers and steam-convection ovens - Edition 5.2; Consolidated Reprint 2122 62481-6-2 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 6-2: Remote user interface 2017 IEC 0 RVU - Edition 1.0 2123 61869-11 Instrument transformers Part 11: Additional requirements for low-power passive voltage transformers - Edition 1.0 2017 IEC 0 2124 TS 62950 Household and similar electrical appliances Specifying smart capabilities, of appliances and devices General aspects - 2017 IEC 0 Edition 1.0 2125 61968-3 Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network 2017 IEC 0 operations - Edition 2.0 2126 61326-3-2 Electrical equipment for measurement, control and laboratory use EMC requirements Part 3-2: Immunity requirements for 2017 IEC 0 safety-related systems and for equipment intended to perform safety-related functions (functional safety) Industrial applications with sp 2127 62153-4-6 Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface 2017 IEC 0 (REDLINE + transfer impedance - Line injection method IEC - Edition 2.0 STA 2128 TS 60318-7 Electroacoustics Simulators of human head and ear Part 7: Head and torso simulator for the measurement of air-conduction 2017 IEC 0 hearing aids - Edition 2.0 2129 60400 Lampholders for tubular fluorescent lamps and starterholders - Edition 8.0 2017 IEC 0 2130 PAS 63125 Clothes washing machines for commercial use Methods for measuring the performance - Edition 1.0 2017 IEC 0 2131 62232 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of 2017 IEC 0 evaluating human exposure - Edition 2.0 2132 62670-3 Photovoltaic concentrators (CPV) Performance testing Part 3: Performance measurements and power rating - Edition 1.0 2017 IEC 0 2133 60068-2-52 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) - Edition 3.0 2017 IEC 0 2134 60601-2-28 Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube 2017 IEC 0 (REDLINE + assemblies for medical diagnosis - Edition 3.0 STA 2135 TR 63051 Documentation on design automation subjects Mathematical algorithm hardware description languages for system level 2017 IEC 0 modeling and verification (HDLMath) - Edition 1.0 2136 62433-3 EMC IC modelling - Part 3: Models of integrated circuits for EMI behavioural simulation - Radiated emissions modelling 2017 IEC 0 (ICEM-RE) - Edition 1.0 2137 63028 Wireless power transfer Airfuel alliance resonant baseline system specification (BSS) - Edition 1.0 2017 IEC 0 2138 61810-1 CORR Electromechanical elementary relays Part 1: General and safety requirements - Edition 4.0 2017 IEC 0 1 2139 61511-1 FUNCTIONAL SAFETY SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR Part 1: 2017 IEC 0 Framework, definitions, system, hardware and application programming requirements - Edition 2.1; Consolidated reprint 2140 61084-2-4 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service 2017 IEC 0 poles and service posts - Edition 2.0 2141 TS 61970-600-1 Energy management system application program interface (EMS-API) - Part 600-1: Common Grid Model Exchange 2017 IEC 0 Specification (CGMES) - Structure and rules - Edition 1.0 2142 60335-2-85 Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers - Edition 2.2; 2017 IEC 0 Consolidated Reprint 2143 61340-4-7 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization - Edition 2.0 2017 IEC 0 2144 60050-704 AMENDMENT 2 International electrotechnical vocabulary - Part 704: Transmission - Edition 1.0 2017 IEC 0 AMD 2 2145 60601-2-65 Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental 2017 IEC 0 intra-oral X-ray equipment - Edition 1.1; Consolidated Reprint 2146 62976 Industrial non-destructive testing equipment - Electron linear accelerator - Edition 1.0 2017 IEC 0 2147 60715 Dimensions of Low-Voltage Switchgear and Controlgear Standardized Mounting on Rails for Mechanical Support of 2017 IEC 0 Electrical Devices in Switchgear and Controlgear Installations - Edition 2.0 2148 62657-2 Industrial communication networks Wireless communication networks Part 2: Coexistence management - Edition 2.0 2017 IEC 0 2149 62287-1 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic 2017 IEC 0 (REDLINE + identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques - Edition 3.0 STANDA 2150 61169-59 Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency 2017 IEC 0 connectors - Edition 1.0 2151 62805-1 Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze - 2017 IEC 0 Edition 1.0 2152 60601-2-2 Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high 2017 IEC 0 (REDLINE + frequency surgical equipment and high frequency surgical accessories IEC - Edition 6.0 STAN 2153 62893-2 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV Part 2: Test methods - Edition 1.0 2017 IEC 0 2154 TS 62239-2 Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS 2017 IEC 0 assembly management plan - Edition 1.0 2155 60068-2-18 Environmental testing Part 2-18: Tests Test R and guidance: Water - Edition 3.0 2017 IEC 0 2156 63041-1 Piezoelectric sensors Part 1: Generic specifications - Edition 1.0 2017 IEC 0 2157 60794-1-22 Optical fibre cables Part 1-22: Generic specification Basic optical cable test procedures Environmental test methods - 2017 IEC 0 (REDLINE + Edition 2.0 STA 2158 GUIDE 119 Preparation of energy efficiency publications and the use of basic energy efficiency publications and group energy 2017 IEC 0 efficiency publications - Edition 1.0 2159 62271-101 High-voltage switchgear and controlgear Part 101: Synthetic testing - Edition 2.1; Consolidated Reprint 2017 IEC 0 2160 60364-7-712 Low voltage electrical installations Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV) 2017 IEC 0 (REDLINE + power supply systems - Edition 2.0 ST 2161 60749-3 Semiconductor devices Mechanical and climatic test methods Part 3: External visual examination - Edition 2.0 2017 IEC 0 2162 62271-100 High-voltage switchgear and controlgear Part 100: Alternating-current circuit-breakers - Edition 2.2; Consolidated Reprint 2017 IEC 0 2163 TS 62997 Industrial electroheating and electromagnetic processing equipment Evaluation of hazards caused by magnetic nearfields 2017 IEC 0 from 1 Hz to 6 MHz - Edition 1.0 2164 60335-2-60 Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool 2017 IEC 0 spas - Edition 4.0 2165 60077-1 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules - Edition 2017 IEC 0 2.0 2166 62841-2-21 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-21: Particular 2017 IEC 0 requirements for hand-held drain cleaners - Edition 1.0 2167 TS 63066 Low-voltage docking connectors for removable energy storage units - Edition 1.0 2017 IEC 0 2168 61937-9 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 9: Non-linear PCM 2017 IEC 0 bitstreams according to the MAT format - Edition 2.0 2169 62820-1-2 Building intercom systems - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP) - 2017 IEC 0 Edition 1.0 2170 60623 Secondary cells and batteries containing alkaline or other non-acid electrolytes Vented nickel-cadmium prismatic 2017 IEC 0 rechargeable single cells - Edition 5.0 2171 61000-3-11 Electromagnetic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations and flicker in 2017 IEC 0 public low-voltage supply systems Equipment with rated current â_¤75 A and subject to conditional connection - Edition 2.0 2172 60335-2-52 Household and similar electrical appliances Safety Part 2-52: Particular requirements for oral hygiene appliances - Edition 2017 IEC 0 3.2; Consolidated Reprint 2173 62481-1-2 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1-2: Architecture and 2017 IEC 0 protocols Extended Digital Media Renderer - Edition 1.0 2174 60404-8-7 Magnetic materials Part 8-7: Specifications for individual materials Cold-rolled grain-oriented electrical steel strip and 2017 IEC 0 (REDLINE + sheet delivered in the fully-processed state - Edition 4.0 STAN 2175 62554 Sample preparation for measurement of mercury level in fluorescent lamps - Edition 1.1; Consolidated Reprint 2017 IEC 0 2176 60061-2 AMD Amendment 53 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2017 IEC 0 53 Lampholders - Edition 3.32 2177 TS 63033-1 Car multimedia systems and equipment Drive monitoring system Part 1: General IEC - Edition 1.0 2017 IEC 0 2178 61558-1 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests - 2017 IEC 0 Edition 3.0 2179 60730-2-13 Automatic electrical controls Part 2-13: Particular requirements for humidity sensing controls - Edition 3.0 2017 IEC 0 2180 62047-28 Semiconductor devices - Micro-electromechanical devices - Part 28: Performance testing method of vibration-driven 2017 IEC 0 MEMS electret energy harvesting devices - Edition 1.0 2181 60598-2-22 Luminaires Part 2-22: Particular requirements Luminaires for emergency lighting - Edition 4.1; Consolidated Reprint 2017 IEC 0 2182 63080 Accessibility terms and definitions - Edition 1.0 2017 IEC 0 2183 60728-13-1 Cable networks for television signals, sound signals and interactive services Part 13-1: Bandwidth expansion for broadcast 2017 IEC 0 signal over FTTH system - Edition 2.0 2184 60079-0 Explosive atmospheres Part 0: Equipment General requirements - Edition 7.0 2017 IEC 0 2185 IEC/IEEE Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications 2017 IEC 0 62704-3 devices, 30 MHz to 6 GHz Part 3: Specific requirements for using the finite difference time domain (FDTD) method for SAR calculations of mob 2186 PAS 63108 Electrical installations in ships - Primary DC distribution - System design architecture - Edition 1.0 2017 IEC 0 2187 62271-211 High-voltage switchgear and controlgear Part 211: Direct connection between power transformers and gas-insulated metal- 2017 IEC 0 CORR 2 enclosed switchgear for rated voltages above 52 kV - Edition 1.0 2188 61196-1-206 Coaxial communication cablesâ__Part 1-206: Environmental test methods Climatic sequence - Edition 2.0 2017 IEC 0 2189 61400-25-1 Wind energy generation systems Part 25-1: Communications for monitoring and control of wind power plants Overall 2017 IEC 0 (REDLINE + description of principles and models - Edition 2.0 STA 2190 60335-2-49 Household and similar electrical appliances Safety Part 2-49: Particular requirements for commercial electric appliances for 2017 IEC 0 keeping food and crockery warm - Edition 4.2; Consolidated Reprint 2191 60137 Insulated bushings for alternating voltages above 1 000 V - Edition 7.0 2017 IEC 0 2192 60335-2-53 Household and similar electrical appliances Safety Part 2-53: Particular requirements for sauna heating appliances and 2017 IEC 0 CORR 1 infrared cabins - Edition 4.0 2193 62766-4-2 Consumer terminal function for access to IPTV and open internet multimedia services Part 4-2: Examples of IPTV protocol 2017 IEC 0 sequences - Edition 1.0 2194 61800-9-2 Adjustable speed electrical power drive systems Part 9-2: Ecodesign for power drive systems, motor starters, power 2017 IEC 0 electronics and their driven applications Energy efficiency indicators for power drive systems and motor starters - Edition 1.0 2195 61000-3-3 Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in 2017 IEC 0 public low-voltage supply systems, for equipment with rated current â_¤ 16 A per phase and not subject to conditional connection - Edit 2196 60793-1-45 Optical Fibres - Part 1-45: Measurement Methods and Test Procedures - Mode Field Diameter - Edition 2.0 2017 IEC 0 2197 60079-7 Explosive atmospheres Part 7: Equipment protection by increased safety "e" - Edition 5.1; Consolidated Reprint 2017 IEC 0 2198 61709 Electric components Reliability Reference conditions for failure rates and stress models for conversion - Edition 3.0 2017 IEC 0 (REDLINE + STANDARD 2199 60747-4 Semiconductor devices Discrete devices Part 4: Microwave diodes and transistors - Edition 2.1; Consolidated Reprint 2017 IEC 0 2200 60793-2-70 Optical fibres - Part 2-70: Product specifications - Sectional specification for polarizationmaintaining fibres - Edition 1.0 2017 IEC 0 2201 61191-3 Printed board assemblies Part 3: Sectional specification Requirements for through-hole mount soldered assemblies - 2017 IEC 0 Edition 2.0 2202 60811-508 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at 2017 IEC 0 high temperature for insulation and sheaths - Edition 1.1; Consolidated Reprint 2203 62704-2 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications 2017 IEC 0 devices, 30 MHz to 6 GHz Part 2: Specific requirements for finite difference time domain (FDTD) modelling of exposure from vehicle mounted a 2204 62056-7-3 Electricity metering data exchange - The DLMS/COSEM suite - Part 7-3: Wired and wireless M-Bus communication 2017 IEC 0 profiles for local and neighbourhood networks - Edition 1.0 2205 TS 60479-2 Effects of current on human beings and livestock Part 2: Special aspects - Edition 4.0 2017 IEC 0 2206 61057 Live working - Insulating aerial devices for mounting on a chassis - Edition 2.0 2017 IEC 0 2207 CISPR/TR 18-3 Radio interference characteristics of overhead power lines and high-voltage equipment Part 3: Code of practice for 2017 IEC 0 minimizing the generation of radio noise - Edition 3.0 2208 PAS 63095-2 The Qi wireless power transfer system Power class 0 specification Part 2: Reference Designs Version.1.1.2 - Edition 1.0 2017 IEC 0 2209 GUIDE 112 Guide on the safety of multimedia equipment - Edition 4.0 2017 IEC 0 2210 60050-731 AMENDMENT 2 International electrotechnical vocabulary Part 731: Optical fibre communication - Edition 1.0 2017 IEC 0 AMD 2 2211 60335-2-107 Household and similar electrical appliances Safety Part 2-107: Particular requirements for robotic battery powered 2017 IEC 0 electrical lawnmowers - Edition 2.0 2212 63029 Audio, video multimedia systems and equipment Multimedia e-publishing and e-book technologies Raster-graphics image- 2017 IEC 0 based e-books - Edition 1.0 2213 TS 62996 Industrial electroheating and electromagnetic processing equipment Requirements on touch currents, voltages and electric 2017 IEC 0 fields from 1 kHz to 6 MHz - Edition 1.0 2214 62325-451-3 AMENDMENT 1 Framework for energy market communications Part 451-3: Transmission capacity allocation business 2017 IEC 0 AMD 1 process (explicit or implicit auction) and contextual models for European market - Edition 1.0 2215 61400-25-5 Wind energy generation systems Part 25-5: Communications for monitoring and control of wind power plants Compliance 2017 IEC 0 testing - Edition 2.0 2216 62873-1 Residual current operated circuit-breakers for household and similar use Part 1: Outline of blocks and modules for residual 2017 IEC 0 current device standards - Edition 1.0 2217 62619 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium 2017 IEC 0 cells and batteries, for use in industrial applications - Edition 1.0 2218 62877-1 CORR Electrolyte and water for vented lead acid accumulators Part 1: Requirements for electrolyte - Edition 1.0 2017 IEC 0 1 2219 62271-110 High-voltage switchgear and controlgear Part 110: Inductive load switching CORRIGENDUM 1 - Edition 4.0 2017 IEC 0 CORR 1 2220 60335-2-48 Household and similar electrical appliances Safety Part 2-48: Particular requirements for commercial electric grillers and 2017 IEC 0 toasters - Edition 4.2; Consolidated Reprint 2221 62481-7 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 7: Authentication - Edition 2017 IEC 0 1.0 2222 62024-1 High frequency inductive components Electrical characteristics and measuring methods Part 1: Nanohenry range chip 2017 IEC 0 inductor - Edition 3.0 2223 60810 Lamps, light sources and led packages for road vehicles Performance requirements - Edition 5.0 2017 IEC 0 2224 IEC/IEEE Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications 2017 IEC 0 62704-1 devices, 30 MHz to 6 GHz Part 1: General requirements for using the finite-difference time-domain (FDTD) method for SAR calculations - Editi 2225 62115 Electric toys Safety - Edition 2.0 2017 IEC 0 2226 62153-4-6 Metallic communication cable test methods Part 4-6: Electromagnetic compatibility (EMC) Surface transfer impedance 2017 IEC 0 Line injection method - Edition 2.0 2227 61954 Static var compensators (SVC) - Testing of thyristor valves - Edition 2.2; Consolidated Reprint 2017 IEC 0 2228 60749-43 Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans - 2017 IEC 0 Edition 1.0 2229 62443-2-4 Security for industrial automation and control systems Part 2-4: Security program requirements for IACS service providers 2017 IEC 0 - Edition 1.1; Consolidated Reprint 2230 62702-1-2 Audio archive system Part 1-2: BD disk and data migration for long-term audio data storage - Edition 1.0 2017 IEC 0 2231 60601-2-28 Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube 2017 IEC 0 assemblies for medical diagnosis - Edition 3.0 2232 62838 CORR 1 CORRIGENDUM 1 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 2017 IEC 0 V ripple free d.c. Safety specifications - Edition 1.0 2233 62788-1-6 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for 2017 IEC 0 determining the degree of cure in Ethylene-Vinyl Acetate - Edition 1.0 2234 63035 MIDI (musical instrument digital interface) specification 1.0 (Abridged Edition, 2015) - Edition 1.0 2017 IEC 0 2235 TR 62271-305 High-voltage switchgear and controlgear Part 305: Capacitive current switching capability of air-insulated Disconnectors 2017 IEC 0 CORR 1 for rated voltages above 52 kV - Edition 1.0 2236 TS 62788-2 Measurement procedures for materials used in photovoltaic modules Part 2: Polymeric materials Frontsheets and 2017 IEC 0 backsheets - Edition 1.0 2237 61169-11 Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer 2017 IEC 0 type 4,1-9,5) - Edition 1.0) _خ conductor 9,5 mm with threaded coupling - Characteristic impedance 50 2238 TS 61970-600-2 Energy management system application program interface (EMS-API) - Part 600-2: Common Grid Model Exchange 2017 IEC 0 Specification (CGMES) - Exchange profiles specification - Edition 1.0 2239 61097-12 Global maritime distress and safety system (GMDSS) - Part 12: Survival craft portable two-way VHF radiotelephone 2017 IEC 0 apparatus - Operational and performance requirements, methods of testing and required test results - Edition 1.1; Consolidated Reprint 2240 TR 62343-6-6 Dynamic modules Part 6-6: Design guide Failure mode effect analysis for optical units of dynamic modules - Edition 2.0 2017 IEC 0 2241 60050-705 AMENDMENT 3 International electrotechnical vocabulary Part 705: Radio wave propagation - Edition 1.0 2017 IEC 0 AMD 3 2242 TS 60079-46 Explosive atmospheres Part 46: Equipment assemblies - Edition 1.0 2017 IEC 0 2243 62931 GX16t-5 capped tubular led lamp Safety specifications - Edition 1.0 2017 IEC 0 2244 62047-29 Semiconductor devices - Micro-electromechanical devices - Part 29: Electromechanical relaxation test method for 2017 IEC 0 freestanding conductive thin films under room temperature - Edition 1.0 2245 61745 End-face image analysis procedure for the calibration of optical fibre geometry test sets - Edition 2.0 2017 IEC 0 2246 62287-1 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic 2017 IEC 0 identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques - Edition 3.0 2247 61587-6 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security 2017 IEC 0 aspects for indoor cabinets - Edition 1.0 2248 CISPR 25 COR Vehicles, boats and internal combustion engines Radio disturbance characteristics Limits and methods of measurement for 2017 IEC 0 1 the protection of on-board receivers - Edition 4.0 2249 61184 Bayonet lampholders - Edition 4.0 2017 IEC 0 2250 62805-2 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance - Edition 1.0 2017 IEC 0 2251 60601-2-2 Medical electrical equipment Part 2-2: Particular requirements for the basic safety and essential performance of high 2017 IEC 0 frequency surgical equipment and high frequency surgical accessories - Edition 6.0 2252 62841-3-13 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular 2017 IEC 0 requirements for transportable drills - Edition 1.0 2253 61000-4-39 Electromagnetic compatibility (EMC) Part 4-39: Testing and measurement techniques Radiated fields in close proximity 2017 IEC 0 Immunity test - Edition 1.0 2254 63041-2 Piezoelectric sensors Part 2: Chemical and biochemical sensors - Edition 1.0 2017 IEC 0 2255 60794-1-22 Optical fibre cables Part 1-22: Generic specification Basic optical cable test procedures Environmental test methods - 2017 IEC 0 Edition 2.0 2256 60974-1 Arc welding equipment - Part 1: Welding power sources - Edition 5.0 2017 IEC 0 2257 60364-7-712 Low voltage electrical installations Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV) 2017 IEC 0 power supply systems - Edition 2.0 2258 60749-4 Semiconductor devices Mechanical and climatic test methods Part 4: Damp heat, steady state, highly accelerated stress test 2017 IEC 0 (HAST) - Edition 2.0 2259 TS 62446-3 Photovoltaic (PV) systems Requirements for testing, documentation and maintenance Part 3: Photovoltaic modules and 2017 IEC 0 plants Outdoor infrared thermography - Edition 1.0 2260 TR 63084 Nuclear power plants Instrumentation and control important to safety Platform qualifaction for systems important to safety 2017 IEC 0 - Edition 1.0 2261 CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: 2017 IEC 0 INT 2 Emission - Edition 6.0 2262 60747-16-1 Semiconductor devices Part 16-1: Microwave integrated circuits Amplifiers - Edition 1.2; Consolidated Reprint 2017 IEC 0 2263 60335-2-102 Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning 2017 IEC 0 (REDLINE + appliances having electrical connections - Edition 2.0 ST 2264 IEC/IEEE Power transformers Part 57-1202: Liquid immersed phase-shifting transformers - Edition 1.0 2017 IEC 0 60076-57-1202 2265 61937-14 Digital audio Interface for non-linear pcm encoded audio bitstreams applying IEC 60958 Part 14: Non-linear PCM bit 2017 IEC 0 streams according to the AC-4 format - Edition 1.0 2266 62920 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment - Edition 2017 IEC 0 1.0 2267 62481-5 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5: Device Profiles - Edition 2017 IEC 0 2.0 2268 60404-8-7 Magnetic materials Part 8-7: Specifications for individual materials Cold-rolled grain-oriented electrical steel strip and 2017 IEC 0 sheet delivered in the fully-processed state - Edition 4.0 2269 60061-3 AMD Amendment 54 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: 2017 IEC 0 54 Gauges - Edition 3.44 2270 PAS 63095-1 The Qi wireless power transfer system power class 0 specification - Parts 1 and 2: Interface Definitions - Edition 1.0 2017 IEC 0 2271 60793-1-47 Optical fibres Part 1-47: Measurement methods and test procedures Macrobending loss - Edition 4.0 2017 IEC 0 (REDLINE + STA 2272 62435-1 Electronic components Long-term storage of electronic semiconductor devices Part 1: General - Edition 1.0 2017 IEC 0 2273 TR 60893-4 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 4: Typical 2017 IEC 0 values - Edition 2.1 Consolidated Reprint 2274 61360-1 Standard data element types with associated classification scheme Part 1: Definitions Principles and methods - Edition 4.0 2017 IEC 0 2275 60194-2 Printed boards design, manufacture and assembly Vocabulary Part 2: Common usage in electronic technologies as well as 2017 IEC 0 printed board and electronic assembly technologies - Edition 1.0 2276 TR 63097 Smart grid standardization roadmap - Edition 1.0 2017 IEC 0 2277 60335-2-81 Household and similar electrical appliances Safety Part 2-81: Particular requirements for foot warmers and heating mats - 2017 IEC 0 Edition 3.1; Consolidated Reprint 2278 61400-25-1 Wind energy generation systems Part 25-1: Communications for monitoring and control of wind power plants Overall 2017 IEC 0 description of principles and models - Edition 2.0 2279 61000-4-12 Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques Ring wave immunity test - Edition 2017 IEC 0 (REDLINE + 3.0 STA 2280 60335-2-64 Household and similar electrical appliances Safety Part 2-64: Particular requirements for commercial electric kitchen 2017 IEC 0 machines - Edition 3.2; Consolidated Reprint 2281 TS 62916 Photovoltaic modules Bypass diode electrostatic discharge susceptibility testing - Edition 1.0 2017 IEC 0 2282 62830-1 Semiconductor devices Semiconductor devices for energy harvesting and generation Part 1: Vibration based piezoelectric 2017 IEC 0 energy harvesting - Edition 1.0 2283 61000-4-11 ELECTROMAGNETIC COMPATIBILITY (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short 2017 IEC 0 interruptions and voltage variations immunity tests - Edition 2.1 2284 61076-2-111 Connectors for electrical and electronic equipment Product requirements Part 2-111: Circular connectors Detail 2017 IEC 0 specification for power connectors with M12 screw-locking - Edition 1.0 2285 IEC/IEEE Power transformers Part 57-129: Transformers for HVDC applications - Edition 1.0 2017 IEC 0 60076-57-129 2286 60445 Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals, 2017 IEC 0 (REDLINE + conductor terminations and conductors - Edition 6.0 STANDARD 2287 61709 Electric components Reliability Reference conditions for failure rates and stress models for conversion - Edition 3.0 2017 IEC 0 2288 62054-21 Electricity metering (AC) Tariff and load control Part 21: Particular requirements for time switches - Edition 1.1; 2017 IEC 0 Consolidated Reprint 2289 61810-2 Electromechanical elementary relays Part 2: Reliability - Edition 3.0 2017 IEC 0 2290 60811-509 Electric and optical fibre cables Test methods for non-metallic materials Part 509: Mechanical tests Test for resistance of 2017 IEC 0 insulations and sheaths to cracking (heat shock test) - Edition 1.1; Consolidated Rprint 2291 61800-3 Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods - Edition 3.0 2017 IEC 0 2292 60539-1 CORR DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS Part 1: Generic specification - 2017 IEC 0 1 Edition 3.0 2293 62586-2 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements - Edition 2.0 2017 IEC 0 2294 61097-3 Global maritime distress and safety system (GMDSS) Part 3: Digital selective calling (DSC) equipment Operational and 2017 IEC 0 performance requirements, methods of testing and required testing results - Edition 2.0 2295 61851-21-1 Electric vehicle conductive charging system Part 21-1: Electric vehicle on-board charger EMC requirements for conductive 2017 IEC 0 connection to an AC/DC supply - Edition 1.0 2296 TS 62607-4-5 Nanomanufacturing - Key control characteristics - Part 4-5: Cathode nanomaterials for nano-enabled electrical energy 2017 IEC 0 storage - Electrochemical characterization, 3-electrode cell method - Edition 1.0 2297 60050-114 AMENDMENT 1 International electrotechnical vocabulary - Part 114: Electrochemistry - Edition 1.0 2017 IEC 0 AMD 1 2298 61281-1 Fibre optic communication subsystems - Part 1: Generic specification - Edition 2.0 2017 IEC 0 2299 TR 63065 Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station - Edition 1.0 2017 IEC 0 2300 62949 Particular safety requirements for equipment to be connected to information and communication networks - Edition 1.0 2017 IEC 0 2301 61980-1 CORR ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS Part 1: General requirements - Edition 1.0 2017 IEC 0 1 2302 TR 60493-3 Guidelines for the statistical analysis of ageing test data - Part 3: Minimum specimen numbers at different test conditions 2017 IEC 0 with given experimental data - Edition 1.0 2303 62841-2-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-10: Particular 2017 IEC 0 requirements for hand-held mixers - Edition 1.0 2304 TR 62660-4 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 4: Candidate alternative test methods for the 2017 IEC 0 internal short circuit test of IEC 62660-3 - Edition 1.0 2305 60079-13 Explosive atmospheres Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" - Edition 2017 IEC 0 2.0 2306 62481-8 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 8: Diagnostics - Edition 2017 IEC 0 1.0 2307 62386-332 Digital addressable lighting interface Part 332: Particular requirements Input devices Feedback - Edition 1.0 2017 IEC 0 2308 60364-7-704 Low voltage electrical installations Part 7-704: Requirements for special installations or locations Construction and 2017 IEC 0 demolition site installations - Edition 3.0 2309 62325-451-4 Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual and 2017 IEC 0 assembly models for European market - Edition 2.0 2310 60645-1 Electroacoustics Audiometric equipment Part 1: Equipment for pure-tone and speech audiometry - Edition 4.0 2017 IEC 0 (REDLINE + STANDA 2311 60700-2 CORR THYRISTOR VALVES FOR HIGH VOLTAGE DIRECT CURRENT (HVDC) POWER TRANSMISSION Part 2: 2017 IEC 0 1 Terminology - Edition 1.0 2312 60335-2-24 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice- 2017 IEC 0 cream appliances and ice-makers - Edition 7.2 Consolidated Reprint 2313 62496-2 Optical circuit boards Basic test and measurement procedures Part 2: General guidance for definition of measurement 2017 IEC 0 conditions for optical characteristics of optical circuit boards - Edition 1.0 2314 62667 Medical electrical equipment Medical light ion beam equipment Performance characteristics - Edition 1.0 2017 IEC 0 2315 62828-2 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific 2017 IEC 0 procedures for pressure transmitters - Edition 1.0 2316 TR 62453-52- Field device tool (FDT) interface specification Part 52-31: Communication implementation for common language 2017 IEC 0 31 infrastructure IEC 61784 CP 3/1 and CP 3/2 - Edition 1.0 2317 62924 Railway applications - Fixed installations - Stationary energy storage system for DC traction systems - Edition 1.0 2017 IEC 0 2318 TR 63094 Multimedia systems and equipment Multimedia signal transmission Dependable line code with error correction - Edition 2017 IEC 0 1.0 2319 62863 Method of measuring performances of electric hair clippers or trimmers for household use - Edition 1.0 2017 IEC 0 2320 61951-2 Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary sealed cells and batteries for 2017 IEC 0 (REDLINE + portable applications Part 2: Nickel-metal hydride - Edition 4.0 STANDA 2321 TS 62462 Ultrasonics - Output test - Guidance for the maintenance of ultrasound physiotherapy systems - Edition 2.0 2017 IEC 0 2322 61347-2-11 Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires - Edition 2017 IEC 0 1.1; Consolidated Reprint 2323 62739-3 Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 3: Selection guidance of 2017 IEC 0 erosion test methods - Edition 1.0 2324 60050-713 AMENDMENT 2 International electrotechnical vocabulary Part 713: Radiocommunications: transmitters, receivers, 2017 IEC 0 AMD 2 networks and operation - Edition 1.0 2325 62893-1 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV Part 1: General requirements - Edition 2017 IEC 0 1.0 2326 60364-6 CORR Low-voltage electrical installations Part 6: Verification - Edition 2.0 2017 IEC 0 1 2327 61937-3 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 3: Non-linear PCM 2017 IEC 0 (REDLINE + bitstreams according to the AC-3 and enhanced AC-3 formats - Edition 3.0 STANDA 2328 62386-301 Digital addressable lighting interface Part 301: Particular requirements Input devices Push buttons - Edition 1.0 2017 IEC 0 2329 61189-5-503 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: 2017 IEC 0 General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards - Edition 1.0 2330 61300-2-55 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-55: Tests 2017 IEC 0 Strength of mounted adaptor - Edition 1.0 2331 TR 61292-9 Optical amplifiers Part 9: Semiconductor optical amplifiers (SOAs) - Edition 2.0 2017 IEC 0 2332 62271-110 High-voltage switchgear and controlgear - Part 110: Inductive load switching - Edition 4.0 2017 IEC 0 (REDLINE + STAN 2333 60500 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz - Edition 2.0 2017 IEC 0 2334 60749-6 Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature - Edition 2.0 2017 IEC 0 2335 TR 62453-51- Field device tool (FDT) interface specification - Part 51-20: Communication implementation for common object model - 2017 IEC 0 20 IEC 61784 CPF 2 - Edition 1.0 2336 CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: 2017 IEC 0 INT 1 Emission - Edition 6.0 2337 60335-2-102 Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning 2017 IEC 0 appliances having electrical connections - Edition 2.0 2338 62041 Transformers, power supplies, reactors and similar products EMC requirements - Edition 3.0 2017 IEC 0 2339 TS 62933-4-1 Electrical energy storage (EES) systems - Part 4-1: Guidance on environmental issues - General specification - Edition 1.0 2017 IEC 0 2340 62569-1 Generic specification of information on products by properties Part 1: Principles and methods - Edition 1.0 2017 IEC 0 2341 60598-1 Luminaires Part 1: General requirements and tests - Edition 8.1; Consolidated Reprint 2017 IEC 0 2342 60096-0-1 Radio frequency cables Part 0-1: Guidelines to the design of detail specifications Coaxial cables - Edition 3.1; Consolidated 2017 IEC 0 Reprint 2343 60793-1-47 Optical fibres Part 1-47: Measurement methods and test procedures Macrobending loss - Edition 4.0 2017 IEC 0 2344 62435-5 Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices - Edition 2017 IEC 0 1.0 2345 TS 62257-7 Recommendations for renewable energy and hybrid systems for rural electrification Part 7: Generators - Edition 2.0 2017 IEC 0 (REDLINE + STA 2346 61788-22-1 Superconductivity Part 22-1: Superconducting electronic devices Generic specification for sensors and detectors - Edition 2017 IEC 0 1.0 2347 60370 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes Electric breakdown 2017 IEC 0 methods - Edition 2.0 2348 60317-67 Specifications for particular types of winding wires Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 2017 IEC 0 105 - Edition 1.0 2349 61000-4-12 Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques Ring wave immunity test - Edition 2017 IEC 0 3.0 2350 60794-2 Optical fibre cables Part 2: Indoor cables Sectional specification - Edition 4.0 2017 IEC 0 2351 62951-1 Semiconductor devices Flexible and stretchable semiconductor devices Part 1: Bending test method for conductive thin 2017 IEC 0 films on flexible substrates - Edition 1.0 2352 TS 62861 Guidelines for principal component reliability testing for LED light sources and LED luminaires - Edition 1.0 2017 IEC 0 2353 TS 61000-5-10 Electromagnetic compatibility (EMC) Part 5-10: Installation and mitigation guidelines Guidance on the protection of 2017 IEC 0 facilities against HEMP and IEMI - Edition 1.0 2354 61643-331 Components for low-voltage surge protective devices Part 331: Performance requirements and test methods for metal oxide 2017 IEC 0 varistors (MOV) - Edition 2.0 2355 60445 Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals, 2017 IEC 0 conductor terminations and conductors - Edition 6.0 2356 62325-451-1 Framework for energy market communications - Part 451-1: Acknowledgement business process and contextual model for 2017 IEC 0 CIM European market - Edition 2.0 2357 61810-2-1 Electromechanical elementary relays Part 2-1: Reliability Procedure for the verification of B10 values - Edition 2.0 2017 IEC 0 2358 60811-511 Electric and optical fibre cables Test methods for non-metallic materials Part 511: Mechanical tests Measurement of the 2017 IEC 0 melt flow index of polyethylene and polypropylene compounds - Edition 1.1; Consolisated Rprint 2359 60384-8 CORR Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, 2017 IEC 0 1 Class 1 - Edition 4.0 2360 62680-3-1 Universal Serial Bus interfaces for data and power - Part 3-1: Universal Serial Bus 3.1 Specification - Edition 1.0 2017 IEC 0 2361 TR 61547-1 Equipment for general lighting purposes EMC immunity requirementsPart 1: An objective light flickermeter and voltage 2017 IEC 0 fluctuation immunity test method - Edition 2.0 2362 61987-24-2 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: 2017 IEC 0 Lists of properties (LOPs) of valve/actuator accessories for electronic data exchange - Edition 1.0 2363 62788-1-5 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in 2017 IEC 0 CORR 1 linear dimensions of sheet encapsulation material resulting from applied thermal conditions - Edition 1.0 2364 60969 CORR 1 SELF-BALLASTED COMPACT FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES PERFORMANCE 2017 IEC 0 REQUIREMENTS - Edition 2.0 2365 60050-161 AMENDMENT 7 International electrotechnical vocabulary Part 161: Electromagnetic compatibility - Edition 1.0 2017 IEC 0 AMD 7 2366 62327 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for 2017 IEC 0 the estimation of ambient dose equivalent rate from photon radiation - Edition 2.0 2367 61643-32 Low-voltage surge protective devices Part 32: Surge protective devices connected to the d.c. side of photovoltaic 2017 IEC 0 installations Selection and application principles - Edition 1.0 2368 60794-1-3 Optical fibre cables - Part 1-3: Generic specification - Optical cable elements - Edition 1.0 2017 IEC 0 2369 60364-4-41 Low-voltage electrical installations Part 4-41: Protection for safety Protection against electric shock - Edition 5.1; 2017 IEC 0 Cconsolidated Reprint 2370 60092-376 Electrical installations in ships Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) - Edition 3.0 2017 IEC 0 (REDLINE + STAN 2371 62481-9 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 9: HTTP Adaptive 2017 IEC 0 Delivery - Edition 1.0 2372 62559-3 Use case methodology Part 3: Definition of use case template artefacts into an XML serialized format - Edition 1.0 2017 IEC 0 2373 60810 Lamps, light sources and led packages for road vehicles Performance requirements - Edition 5.0 2017 IEC 0 (REDLINE + STANDARD 2374 60749-28 Semiconductor devices Mechanical and climatic test methods Part 28: Electrostatic discharge (ESD) sensitivity testing 2017 IEC 0 Charged device model (CDM) device level - Edition 1.0 2375 62394 Service diagnostic interface for consumer electronics products and networks Implementation for echonet - Edition 3.0 2017 IEC 0 2376 60645-1 Electroacoustics Audiometric equipment Part 1: Equipment for pure-tone and speech audiometry - Edition 4.0 2017 IEC 0 2377 62715-6-2 Flexible display devices - Part 6-2: Environmental testing methods - Edition 1.0 2017 IEC 0 2378 61000-6-5 Electromagnetic compatibility (EMC) Part 6-5: Generic standards Immunity for equipment used in power station and 2017 IEC 0 CORR 1 substation environment - Edition 1.0 2379 60079-15 Explosive atmospheres Part 15: Equipment protection by type of protection "n" - Edition 5.0 2017 IEC 0 (REDLINE + STAND 2380 TR 60919-1 Performance of high-voltage direct current (HVDC) systems with linecommutated converters - Part 1: Steady-state 2017 IEC 0 conditions - Edition 3.2 Consolidated Reprint 2381 62841-2-17 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery safety Part 2-17: Particular 2017 IEC 0 requirements for hand-held routers - Edition 1.0 2382 62919 Content management - Monitoring and management of personal digital content - Edition 1.0 2017 IEC 0 2383 TR 62453-52- Field device tool (FDT) interface specification - Part 52-32: Communication implementation for common language 2017 IEC 0 32 infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 - Edition 1.0 2384 TS 61375-2-4 Electronic railway equipment - Train communication network (TCN) - Part 2-4: TCN application profile - Edition 1.0 2017 IEC 0 2385 63044-1 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General 2017 IEC 0 requirements - Edition 1.0 2386 TS 60079-32-1 AMENDMENT 1 Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance - Edition 1.0 2017 IEC 0 AMD 1 2387 62127-2 AMD AMENDMENT 2 Ultrasonics Hydrophones Part 2: Calibration for ultrasonic fields up to 40 MHz - Edition 1.0 2017 IEC 0 2 2388 62488-2 Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC - 2017 IEC 0 Edition 1.0 2389 60050-714 AMENDMENT 2 International electrotechnical vocabulary Part 714: Switching and signalling in telecommunications - 2017 IEC 0 AMD 2 Edition 1.0 2390 62893-3 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV Part 3: Cables for AC charging 2017 IEC 0 according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V - Edition 1.0 2391 62501 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission Electrical testing - 2017 IEC 0 Edition 1.2; Consolidated Reprint 2392 61937-3 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 3: Non-linear PCM 2017 IEC 0 bitstreams according to the AC-3 and enhanced AC-3 formats - Edition 3.0 2393 62386-302 Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices - Edition 2017 IEC 0 1.0 2394 TR 61850-90- Communication networks and systems for power utility automation - Part 90-17: Using IEC 61850 to transmit power 2017 IEC 0 17 quality data - Edition 1.0 2395 62561-1 Lightning protection system components (LPSC) - Part 1: Requirements for connection components - Edition 2.0 2017 IEC 0 (REDLINE + STANDA 2396 TR 62325-103 Framework for energy market communications Part 103: Review of information exchanges within the deregulated 2017 IEC 0 European style retail energy market from a CIM perspective - Edition 1.0 2397 62271-110 High-voltage switchgear and controlgear Part 110: Inductive load switching - Edition 4.0 2017 IEC 0 2398 60704-2-3 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: 2017 IEC 0 Particular requirements for dishwashers - Edition 3.0 2399 60749-9 Semiconductor devices Mechanical and climatic test methods Part 9: Permanence of marking - Edition 2.0 2017 IEC 0 2400 TS 62600-100 MARINE ENERGY WAVE, TIDAL AND OTHER WATER CURRENT CONVERTERS Part 100: Electricity producing 2017 IEC 0 CORR 1 wave energy converters Power performance assessment - Edition 1.0 2401 TR 62453-51- Field device tool (FDT) interface specification Part 51-31: Communication implementation for common object model IEC 2017 IEC 0 31 61784 CP 3/1 and CP 3/2 - Edition 1.0 2402 60335-2-103 Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and 2017 IEC 0 windows - Edition 3.1; Consolidated Reprint 2403 61076-3-119 Connectors for electrical and electronic equipment Product requirements Part 3-119: Rectangular connectors Detail 2017 IEC 0 specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data tran 2404 60445 COR 1 Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals, 2017 IEC 0 conductor terminations and conductors - Edition 6.0 2405 62056-5-3 Electricity metering data exchange The DLMS/COSEM suite Part 5-3: DLMS/COSEM application layer - Edition 3.0 2017 IEC 0 2406 TR 63054 Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures - Edition 1.0 2017 IEC 0 2407 60287-3-1 Electric Cables - Calculation of the Current Rating - Part 3-1: Operating Conditions - site Reference Conditions - Edition 2017 IEC 0 (REDLINE + 2.0 STAN 2408 60350-2 Household electric cooking appliances Part 2: Hobs Methods for measuring performance - Edition 2.0 2017 IEC 0 2409 62608-2 Multimedia home network configuration Basic reference model Part 2: Operational model - Edition 1.0 2017 IEC 0 2410 60893-3-6 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: 2017 IEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins - Edition 2.2; Consolidated Rep 2411 60793-1-1 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance - Edition 4.0 2017 IEC 0 (REDLINE + STAN 2412 61967-4 CORR Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 4: Measurement of conducted 2017 IEC 0 direct coupling method - Edition 1.1 _خ 150/_خ emissions 1 1 2413 62629-13-1 3D display devices Part 13-1: Visual inspection methods for stereoscopic displays using glasses Ghost image - Edition 1.0 2017 IEC 0 2414 62550 Spare parts provisioning - Edition 1.0 2017 IEC 0 2415 TS 62257-7 Recommendations for renewable energy and hybrid systems for rural electrification Part 7: Generators - Edition 2.0 2017 IEC 0 2416 62481-1-1 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1-1: Architecture and 2017 IEC 0 protocols Core architecture and protocols - Edition 3.0 2417 60749-12 Semiconductor devices Mechanical and climatic test methods Part 12: Vibration, variable frequency - Edition 2.0 2017 IEC 0 2418 62351-7 Power systems management and associated information exchange - Data and communications security - Part 7: Network 2017 IEC 0 and System Management (NSM) data object models - Edition 1.0 2419 TR 63079 Code of practice for hearing-loop systems (HLS) - Edition 1.0 2017 IEC 0 2420 62899-401 Printed electronics Part 401: Printability Overview - Edition 1.0 2017 IEC 0 2421 62341-6-4 Organic light emitting diode (OLED) displays - Part 6-4: Measuring methods of transparent properties - Edition 1.0 2017 IEC 0 2422 62368-3 Audio/video, information and communication technology equipment Part 3: Safety aspects for DC power transfer through 2017 IEC 0 communication cables and ports - Edition 1.0 2423 61000-4-5 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test - Edition 3.1; 2017 IEC 0 Consolidated Reprint 2424 TR 80001-2-9 Application of risk management for it-networks incorporating medical devices - Part 2-9: Application guidance Guidance 2017 IEC 0 for use of security assurance cases to demonstrate confidence in IEC TR 80001-2-2 security capabilities - Edition 1.0 2425 61851-1 Electric vehicle conductive charging system Part 1: General requirements - Edition 3.0 2017 IEC 0 2426 62256 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement - Edition 2.0 2017 IEC 0 (REDLINE + STANDARD 2427 62745 Safety of machinery Requirements for cableless control systems of machinery - Edition 1.0 2017 IEC 0 2428 TR 61850-90- Communication networks and systems for power utility automation Part 90-10: Models for scheduling - Edition 1.0 2017 IEC 0 10 2429 61987-24-3 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 24-3: Lists 2017 IEC 0 of properties (LOPs) of flow modification accessories for electronic data exchange - Edition 1.0 2430 CISPR 16-2-1 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of 2017 IEC 0 disturbances and immunity Conducted disturbance measurements - Edition 3.1; Consolidated Reprint 2431 60153-4 Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides - Edition 3.0 2017 IEC 0 2432 60154-4 Flanges for waveguides Part 4: Relevant specifications for flanges for circular waveguides - Edition 2.0 2017 IEC 0 2433 60286-1 Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous 2017 IEC 0 tapes - Edition 3.0 2434 60050-300 AMENDMENT 3 International electrotechnical vocabulary Electrical and electronic measurements and measuring 2017 IEC 0 AMD 3 instruments Part 314: Specific terms according to the type of instrument - Edition 1.0 2435 60050-811 International electrotechnical vocabulary Part 811: Electric traction - Edition 2.0 2017 IEC 0 2436 62396-2 Process management for avionics - Atmospheric radiation effects - Part 2: Guidelines for single event effects testing for 2017 IEC 0 avionics systems - Edition 2.0 2437 TR 62131-6 Environmental conditions - Vibration and shock of electrotechnical equipment Part 6: Transportation by propeller aircraft - 2017 IEC 0 Edition 1.0 2438 60700-1 CORR Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing - Edition 2.0 2017 IEC 0 1 2439 60884-2-5 Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors - Edition 2.0 2017 IEC 0 2440 TR 61189-3- Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 3-914: Test 2017 IEC 0 914 method for thermal conductivity of printed circuit boards for high-brightness LEDs Guidelines - Edition 1.0 2441 60092-376 Electrical installations in ships Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) IEC - Edition 2017 IEC 0 3.0 2442 60728-3 Cable networks for television signals, sound signals and interactive services Part 3: Active wideband equipment for cable 2017 IEC 0 (REDLINE + networks - Edition 5.0 STANDA 2443 62481-10 Digital living network ALLIANCE (DLNA) home networked device interoperability guidelines Part 10: Low-power mode 2017 IEC 0 - Edition 1.0 2444 60335-2-38 Household and similar electrical appliances Safety Part 2-38: Particular requirements for commercial electric griddles and 2017 IEC 0 griddle grills - Edition 5.2 Consolidated Reprint 2445 62820-3-1 Building intercom systems Part 3-1: Application guidelines General - Edition 1.0 2017 IEC 0 2446 TR 61916 Electrical accessories Harmonization of general rules - Edition 4.0 2017 IEC 0 2447 TS 62786 Distributed energy resources connection with the grid - Edition 1.0 2017 IEC 0 2448 60061-4 AMD Amendment 15 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: 2017 IEC 0 15 Guidelines and general information - Edition 1.9 2449 61857-31 Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or 2017 IEC 0 less - Edition 1.0 2450 CISPR 16-1-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and 2017 IEC 0 immunity measuring apparatus Antennas and test sites for radiated disturbance measurements - Edition 3.2; Consolidated Reprint 2451 62754 Computation of waveform parameter uncertainties - Edition 1.0 2017 IEC 0 2452 62927 CORR 1 VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR STATIC SYNCHRONOUS COMPENSATOR 2017 IEC 0 (STATCOM) - ELECTRICAL TESTING - Edition 1.0 2453 60079-15 Explosive atmospheres Part 15: Equipment protection by type of protection "n" - Edition 5.0 2017 IEC 0 2454 61191-2 Printed board assemblies Part 2: Sectional specification Requirements for surface mount soldered assemblies - Edition 3.0 2017 IEC 0 2455 62841-3-12 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-12: Particular 2017 IEC 0 requirements for transportable threading machines - Edition 1.0 2456 60942 Electroacoustics Sound calibrators - Edition 4.0 2017 IEC 0 (REDLINE + STANDARD 2457 PAS 63131 System control diagram - Edition 1.0 2017 IEC 0 2458 TR 62453-52- Field device tool (FDT) interface specification Part 52-90: Communication implementation for common language 2017 IEC 0 90 infrastructure IEC 61784 CPF 9 - Edition 1.0 2459 62606 General requirements for arc fault detection devices - Edition 1.1; Consolidated Reprint 2017 IEC 0 2460 63044-3 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical 2017 IEC 0 safety requirements - Edition 1.0 2461 62766-4-1 Consumer terminal function for access to IPTV and open internet multimedia services - Part 4-1: Protocols - Edition 1.0 2017 IEC 0 2462 60317-56 Specifications for particular types of winding wires Part 56: Solderable fully insulated (FIW) zero-defect polyurethane 2017 IEC 0 enamelled round copper wire, class 180 - Edition 2.0 2463 62271-1 High-voltage switchgear and controlgear Part 1: Common specifications for alternating current switchgear and controlgear 2017 IEC 0 - Edition 2.0 2464 60050-721 AMENDMENT 2 International electrotechnical vocabulary Part 721: Telegraphy, facsimile and data communication - 2017 IEC 0 AMD 2 Edition 1.0 2465 63010-1 Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 1: 2017 IEC 0 General requirements and cables - Edition 1.0 2466 61937-10 Digital audio interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 10: Non-linear PCM 2017 IEC 0 bitstreams according to the MPEG-4 audio lossless coding (ALS) format - Edition 2.0 2467 62386-303 Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor - Edition 1.0 2017 IEC 0 2468 62784 Vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts - 2017 IEC 0 Particular requirements - Edition 1.0 2469 62561-1 Lightning protection system components (LPSC) Part 1: Requirements for connection components - Edition 2.0 2017 IEC 0 2470 60317-0-10 Specifications for particular types of winding wires Part 0-10: General requirements Polyester glass-fibre wound fused, 2017 IEC 0 unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire - Edition 1.0 2471 60749-5 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test - 2017 IEC 0 Edition 2.0 2472 TR 61243-6 Live working - Voltage detectors - Part 6: Guidelines on non-contact voltage detectors (NCVD) for use at nominal voltages 2017 IEC 0 above 1 kV AC - Edition 1.0 2473 TR 62453-51- Field device tool (FDT) interface specification Part 51-32: Communication implementation for common object model IEC 2017 IEC 0 32 61784 CP 3/4, CP 3/5 and CP 3/6 - Edition 1.0 2474 61347-2-7 Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self- 2017 IEC 0 contained) - Edition 3.1; Consolidated Reprint 2475 CISPR 16-1-6 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-6: Radio disturbance and 2017 IEC 0 immunity measuring apparatus EMC antenna calibration - Edition 1.1; Consolidated Reprint 2476 62056-8-5 Electricity metering data exchange â__The DLMS/COSEM suite Part 8-5: Narrow-band OFDM G3-PLC communication 2017 IEC 0 profile for neighbourhood networks - Edition 1.0 2477 CISPR/TR 18-1 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomena 2017 IEC 0 (REDLINE + - Edition 3.0 2478 61252 Electroacoustics - Specifications for Personal Sound Exposure Meters - Edition 1.2; Consolidated Rprint 2017 IEC 0 2479 61921 Power capacitors Low-voltage power factor correction banks - Edition 2.0 2017 IEC 0 (REDLINE + STANDARD 2480 TR 63100 Transmitting equipment for radiocommunication Radio-over-fibre technologies for spectrum measurement 100-GHz 2017 IEC 0 spectrum measurement equipment - Edition 1.0 2481 60287-3-1 Electric cables Calculation of the current rating Part 3-1: Operating conditions Site reference conditions - Edition 2.0 2017 IEC 0 2482 62884-2 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 2: Phase jitter measurement method - 2017 IEC 0 Edition 1.0 2483 60050-692 International electrotechnical vocabulary Part 692: Generation, transmission and distribution of electrical energy 2017 IEC 0 Dependability and quality of service of electric power systems - Edition 1.0 2484 TR 62679-5-1 Electronic paper displays Part 5-1: Legibility of EPD in spatial frequency - Edition 1.0 2017 IEC 0 2485 62047-30 Semiconductor devices Micro-electromechanical devices - Part 30: Measurement methods of electro-mechanical 2017 IEC 0 conversion characteristics of MEMS piezoelectric thin film - Edition 1.0 2486 60793-1-1 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance - Edition 4.0 2017 IEC 0 2487 TR 61340-1 ELECTROSTATICS Part 1: Electrostatic phenomena Principles and measurements - Edition 1.0 2017 IEC 0 CORR 2 2488 62677-1 Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements - Edition 1.0 2017 IEC 0 2489 62830-2 Semiconductor devices Semiconductor devices for energy harvesting and generation Part 2: Thermo power based 2017 IEC 0 thermoelectric energy harvesting - Edition 1.0 2490 60143-1 CORR SERIES CAPACITORS FOR POWER SYSTEMS - Part 1: General - Edition 5.0 2017 IEC 0 1 2491 62481-1-3 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1-3: Architecture and 2017 IEC 0 protocols - Cloud access 2492 61190-1-3 Attachment materials for electronic assembly Part 1-3: Requirements for electronic grade solder alloys and fluxed and 2017 IEC 0 nonfluxed solid solder for electronic soldering applications - Edition 3.0 2493 62895 High voltage direct current (HVDC) power transmission - Cables with extruded insulation and their accessories for rated 2017 IEC 0 voltages up to 320 kV for land applications - Test methods and requirements - Edition 1.0 2494 62841-2-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-1: Particular 2017 IEC 0 requirements for hand-held drills and impact drills - Edition 1.0 2495 62899-402-1 Printed electronics - Part 402-1: Printability - Measurement of qualities - Pattern width - Edition 1.0 2017 IEC 0 2496 62351-9 Power systems management and associated information exchange - Data and communications security - Part 9: Cyber 2017 IEC 0 security key management for power system equipment - Edition 1.0 2497 62928 Railway applications Rolling stock Onboard lithium-ion traction batteries - Edition 1.0 2017 IEC 0 2498 61784-3 Industrial communication networks Profiles Part 3: Functional safety fieldbuses General rules and profile definitions - 2017 IEC 0 Edition 3.1; Consolidated Reprint 2499 61960-3 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for 2017 IEC 0 portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them - Edition 1.0 2500 62256 Hydraulic turbines, storage pumps and pump-turbines Rehabilitation and performance improvement - Edition 2.0 2017 IEC 0 2501 61800-3 Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods - Edition 3.0 2017 IEC 0 (REDLINE + STANDA 2502 62899-502-1 Printed electronics Part 502-1: Quality assessment Organic light emitting diode (OLED) elements Mechanical stress testing 2017 IEC 0 of OLED elements formed on flexible substrates - Edition 1.0 2503 60300-3-3 Dependability management Part 3-3: Application guide Life cycle costing - Edition 3.0 2017 IEC 0 2504 62656-5 Standardized product ontology register and transfer by spreadsheets Part 5: Interface for activity description - Edition 1.0 2017 IEC 0 2505 60317-0-7 Specifications for particular types of winding wires Part 0-7: General requirements Fully insulated (FIW) zero-defect 2017 IEC 0 enamelled round copper wire - Edition 2.0 2506 61084-1 Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements - Edition 2.0 2017 IEC 0 2507 60679-1 Piezoelectric, dielectric and electrostatic oscillators of assessed quality Part 1: Generic specification IEC - Edition 4.0 2017 IEC 0 2508 60050-521 AMENDMENT 1 International Electrotechnical Vocabulary Chapter 521: Semiconductor Devices and Integrated Circuits - 2017 IEC 0 AMD 1 Edition 2.0 2509 62401 Radiation protection instrumentation Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of 2017 IEC 0 radioactive material - Edition 2.0 2510 61504 Nuclear facilities - Instrumentation and control systems important to safety - Centralized systems for continuous monitoring 2017 IEC 0 of radiation and/or levels of radioactivity - Edition 2.0 2511 60384-15 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid 2017 IEC 0 or solid electrolyte - Edition 2.0 2512 TR 60601-4-4 Medical electrical equipment Part 4-4: Guidance and interpretation Guidance for writers of particular standards when 2017 IEC 0 creating alarm system-related requirements - Edition 1.0 2513 60728-3 Cable networks for television signals, sound signals and interactive services Part 3: Active wideband equipment for cable 2017 IEC 0 networks - Edition 5.0 2514 62766-8 Consumer terminal function for access to IPTV and open internet multimedia services Part 8: Profiles - Edition 1.0 2017 IEC 0 2515 61010-2-201 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-201: Particular 2017 IEC 0 (REDLINE + requirements for control equipment - Edition 2.0 ST 2516 62930 Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC - Edition 1.0 2017 IEC 0 2517 62321-7-2 Determination of certain substances in electrotechnical products Part 7-2: Hexavalent chromium Determination of 2017 IEC 0 hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method - Edition 1.0 2518 60061-1 AMD Amendment 56 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2017 IEC 0 56 caps - Edition 3.56 2519 60081 AMD 6 AMENDMENT 6 Double-Capped Fluorescent Lamps - Performance Specifications - Edition 5.1 2017 IEC 0 2520 TR 61000-2-5 Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic 2017 IEC 0 (REDLINE + S environments - Edition 3.0 2521 TR 63091 Study for the derating curve of surface mount fixed resistors Derating curves based on terminal part temperature - Edition 2017 IEC 0 1.0 2522 62435-2 Electronic components Long-term storage of electronic semiconductor devices Part 2: Deterioration mechanisms - Edition 2017 IEC 0 1.0 2523 60122-1 Quartz crystal units of assessed quality Part 1: Generic specification - Edition 3.1; Consolidated Reprint 2017 IEC 0 2524 61753-121-2 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords 2017 IEC 0 with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment - Edition 2.0 2525 62880-1 Semiconductor devices Stress migration test standard Part 1: Copper stress migration test standard - Edition 1.0 2017 IEC 0 2526 60942 Electroacoustics Sound calibrators - Edition 4.0 2017 IEC 0 2527 TR 62453-52- Field device tool (FDT) interface specification Part 52-150: Communication implementation for common language 2017 IEC 0 150 infrastructure IEC 61784 CPF 15 - Edition 1.0 2528 63044-5-1 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC 2017 IEC 0 requirements, conditions and test set-up - Edition 1.0 2529 IEC/IEEE High-voltage switchgear and controlgear Part 37-013: Alternating-current generator circuit-breakers - Edition 1.0 2017 IEC 0 62271-37-013 COR 2530 62766-5-1 Consumer terminal function for access to IPTV and open internet multimedia services - Part 5-1: Declarative application 2017 IEC 0 environment IEC - Edition 1.0 2531 62056-6-1 Electricity metering data exchange The DLMS/COSEM suite Part 6-1: Object Identification System (OBIS) - Edition 3.0 2017 IEC 0 2532 TR 62316 Guidance for the interpretation of OTDR backscattering traces for single-mode fibres - Edition 3.0 2017 IEC 0 2533 60050-722 AMENDMENT 1 International electrotechnical vocabulary Part 722: Telephony - Edition 1.0 2017 IEC 0 AMD 1 2534 62148-1 Fibre Optic Active Componets and Devices - Package and Interface Standards - Part 1: General and Guidance - Edition 2.0 2017 IEC 0 2535 63010-2 Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V Part 2: 2017 IEC 0 Test methods - Edition 1.0 2536 60317-68 Specifications for particular types of winding wires Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 2017 IEC 0 120 - Edition 1.0 2537 62481-2 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2: DLNA media formats - 2017 IEC 0 Edition 3.0 2538 62386-304 Digital addressable lighting interface - Part 304: Particular requirements - Input devices Light sensor - Edition 1.0 2017 IEC 0 2539 62974-1 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements - Edition 2017 IEC 0 1.0 2540 TR 62977-2-3 Electronic display devices Part 2-3: Measurements of optical properties Multi-colour test patterns - Edition 1.0 2017 IEC 0 2541 60317-70 Specifications for particular types of winding wires Part 70: Polyester glass-fibre wound fused, unvarnished or resin or 2017 IEC 0 varnish impregnated, bare or enamelled round copper wire, temperature index 155 - Edition 1.0 2542 61188-7 Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD 2017 IEC 0 library construction - Edition 2.0 2543 60809 Lamps for road vehicles Dimensional, electrical and luminous requirements - Edition 3.2; Consolidated Reprint 2017 IEC 0 2544 61400-12-1 Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines - 2017 IEC 0 (REDLINE + Edition 2.0 STA 2545 TR 62453-51- Field device tool (FDT) interface specification Part 51-60: Communication implementation for common object model IEC 2017 IEC 0 60 61784 CPF 6 - Edition 1.0 2546 60034-18-42 Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating 2017 IEC 0 electrical machines fed from voltage converters - Qualification tests - Edition 1.0 2547 TR 62453-62 Field device tool (FDT) interface specification Part 62: Field device tool (FDT) styleguide for common language 2017 IEC 0 infrastructure - Edition 1.0 2548 60811-201 Electric and optical fibre cables Test methods for non-metallic materials Part 201: General tests Measurement of insulation 2017 IEC 0 thickness - Edition 1.1; Consolidated Reprint 2549 62282-3-201 Fuel cell technologies Part 3-201: Stationary fuel cell power systems Performance test methods for small fuel cell power 2017 IEC 0 systems - Edition 2.0 2550 CISPR/TR 18-1 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomena 2017 IEC 0 - Edition 3.0 2551 61921 Power capacitors Low-voltage power factor correction banks - Edition 2.0 2017 IEC 0 2552 60695-11-2 Fire hazard testing Part 11-2: Test flames 1 kW nominal pre-mixed flame Apparatus, confirmatory test arrangement and 2017 IEC 0 (REDLINE + guidance - Edition 3.0 STA 2553 62899-301-2 Printed electronics Part 301-2: Equipment Contact printing Rigid master Measurement method of plate master pattern 2017 IEC 0 dimension - Edition 1.0 2554 60598-2-4 Luminaires Part 2-4: Particular requirements Portable general purpose luminaires - Edition 3.0 2017 IEC 0 (REDLINE + STAN 2555 60051-5 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for 2017 IEC 0 phase meters, power factor meters and synchroscopes - Edition 5.0 2556 61260-2 Electroacoustics Octave-band and fractional-octave-band filters Part 2: Pattern-evaluation tests - Edition 1.1; Consolidated 2017 IEC 0 Reprint 2557 62683-1 Low-voltage switchgear and controlgear Product data and properties for information exchange Part 1: Catalogue data - 2017 IEC 0 Edition 1.0 2558 62688 Concentrator photovoltaic (CPV) modules and assemblies Safety qualification - Edition 1.0 2017 IEC 0 2559 61291-5-2 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers - Edition 2.0 2017 IEC 0 2560 60674-2 CORR SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES Part 2: Methods of test - Edition 2.0 2017 IEC 0 1 2561 62677-2 Heat shrinkable low and medium voltage moulded shapes Part 2: Methods of test - Edition 1.0 2017 IEC 0 2562 62946-02 Connectors for electronic equipment Part 02: Detail specification for 8-way, unshielded, free and fixed high density 2017 IEC 0 connectors for data transmission with frequencies up to 250 MHz and with current carrying capacity up to 1 A - Edition 1.0 2563 62481-3 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3: Link protection - 2017 IEC 0 Edition 3.0 2564 61340-4-3 Electrostatics Part 4-3: Standard test methods for specific applications Footwear - Edition 2.0 2017 IEC 0 2565 TR 63072-1 Photonic integrated circuits - Part 1: Introduction and roadmap for standardization IEC - Edition 1.0 2017 IEC 0 2566 60601-2-43 Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray 2017 IEC 0 equipment for interventional procedures - Edition 2.1; Consolidated Reprint 2567 61326-3-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements 2017 IEC 0 (REDLINE + for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General STAN industrial applic 2568 60061-1 AMD Amendment 56 to edition 3.0 2017-05 LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE 2017 IEC 0 56 CORR 1 CONTROL OF INTERCHANGEABILITY AND SAFETY Part 1: Lamp caps - Edition 3.56 2569 62056-6-2 Electricity metering data exchange The DLMS/COSEM suite Part 6-2: COSEM interface classes - Edition 3.0 2017 IEC 0 2570 TS 62898-1 Microgrids - Part 1: Guidelines for microgrid projects planning and specification - Edition 1.0 2017 IEC 0 2571 61169-1 CORR Radio frequency connectors Part 1: Generic specification General requirements and measuring methods - Edition 2.0 2016 IEC 0 1 2572 61162-1 Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 1: Single talker and multiple 2016 IEC 0 listeners - Edition 5.0 2573 61162-1 Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 1: Single talker and multiple 2016 IEC 0 (REDLINE + listeners - Edition 5.0 STANDA 2574 61078 Reliability block diagrams - Edition 3.0 2016 IEC 0 2575 61094-5 Electroacoustics Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by 2016 IEC 0 comparison - Edition 2.0 2576 61094-3 CORR ELECTROACOUSTICS MEASUREMENT MICROPHONES Part 3: Primary method for free-field calibration of 2016 IEC 0 1 laboratory standard microphones by the reciprocity technique - Edition 2.0 2577 61094-3 Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard 2016 IEC 0 microphones by the reciprocity technique - Edition 2.0 2578 61097-4 Global maritime distress and safety system (GMDSS) Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group 2016 IEC 0 call (EGC) equipment Operational and performance requirements, methods of testing and required test results - Edition 3.1; Consolidated 2579 61156-9 Multicore and symmetrical pair/quad cables for digital communications Part 9: Cables for channels with transmission 2016 IEC 0 characteristics up to 2 GHz Sectional specification - Edition 1.0 2580 61156-10 Multicore and symmetrical pair/quad cables for digital communications Part 10: Cables for cords with transmission 2016 IEC 0 characteristics up to 2 GHz Sectional specification - Edition 1.0 2581 61133 Railway applications Rolling stock Testing of rolling stock on completion of construction and before entry into service - 2016 IEC 0 (REDLINE + Edition 3.0 STANDARD 2582 61133 Railway applications Rolling stock Testing of rolling stock on completion of construction and before entry into service - 2016 IEC 0 Edition 3.0 2583 61140 Protection against electric shock Common aspects for installations and equipment - Edition 4.0 2016 IEC 0 2584 61010-2-120 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-120: Particular safety 2016 IEC 0 requirements for machinery aspects of equipment - Edition 1.0 2585 61010-2-202 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-202: Particular 2016 IEC 0 requirements for electrically operated valve actuators - Edition 1.0 2586 61017 Radiation protection instrumentation Transportable, mobile or installed equipment to measure photon radiation for 2016 IEC 0 environmental monitoring - Edition 1.0 2587 61069-8 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 8: Assessment of other system properties - Edition 2.0 2588 61069-7 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 7: Assessment of system safety - Edition 2.0 2589 61069-6 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 6: Assessment of system operability - Edition 2.0 2590 61076-3-110 Connectors for electronic equipment Product requirements Part 3-110: Detail specification for free and fixed connectors 2016 IEC 0 for data transmission with frequencies up to 3 000 MHz - Edition 3.0 2591 61076-3-120 Connectors for electronic equipment - Product requirements Part 3-120: Rectangular connectors Detail specification for 2016 IEC 0 rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A - Edition 1.0 2592 61058-2-6 Switches for appliances Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, 2016 IEC 0 transportable tools and lawn and garden machinery - Edition 1.0 2593 61058-1 Switches for appliances - Part 1: General requirements - Edition 4.0 2016 IEC 0 (REDLINE + STANDA 2594 61058-1 Switches for appliances Part 1: General requirements - Edition 4.0 2016 IEC 0 2595 61058-1-1 Switches for appliances Part 1-1: Requirements for mechanical switches - Edition 1.0 2016 IEC 0 2596 61058-1-2 Switches for appliances Part 1-2: Requirements for electronic switches - Edition 1.0 2016 IEC 0 2597 61069-1 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 1: Terminology and basic concepts - Edition 2.0 2598 61069-4 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 4: Assessment of system performance - Edition 2.0 2599 61069-5 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 5: Assessment of system dependability - Edition 2.0 2600 61069-3 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 3: Assessment of system functionality - Edition 2.0 2601 61069-2 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 2016 IEC 0 assessment Part 2: Assessment methodology - Edition 2.0 2602 61000-4-30 ELECTROMAGNETIC COMPATIBILITY (EMC) Part 3-40: Testing and measurement techniques Power quality 2016 IEC 0 CORR 1 measurement methods - Edition 3.0 2603 61000-4-23 Electromagnetic Compatibility (EMC) - Part 4-23: Testing and Measurement Techniques - Test Methods for Protective 2016 IEC 0 Devices for HEMP and Other Radiated Disturbances - Edition 2.0 2604 61000-4-31 Electromagnetic compatibility (EMC) Part 4-31: Testing and measurement techniques AC mains ports broadband 2016 IEC 0 conducted disturbance immunity test - Edition 1.0 2605 61000-4-37 Electromagnetic compatibility (EMC) Part 4-37: Testing and measurement techniques Calibration and verification 2016 IEC 0 protocol for harmonic emission compliance test systems - Edition 1.0; Includes Access to Additional Content 2606 61000-4-10 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic 2016 IEC 0 (REDLINE + field immunity test - Edition 2.0 STA 2607 61000-4-10 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic 2016 IEC 0 field immunity test - Edition 2.0 2608 61000-1-2 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of 2016 IEC 0 electrical and electronic systems including equipment with regard to electromagnetic phenomena - Edition 1.0 2609 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments - 2016 IEC 0 (REDLINE + Edition 3.0 STAN 2610 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments - 2016 IEC 0 Edition 3.0 2611 61000-4-9 Electromagnetic compatibility (EMC) Part 4-9: Testing and measurement techniques Impulse magnetic field immunity 2016 IEC 0 test - Edition 2.0 2612 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and 2016 IEC 0 (REDLINE + light-industrial environments - Edition 3.0 STAN 2613 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and 2016 IEC 0 light-industrial environments - Edition 3.0 2614 61008-1 AMD Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) 2016 IEC 0 1 CORR 1 Part 1: General rules - Edition 3.2 2615 61003-2 Industrial-process control systems - Instruments with analogue inputs and two or multi-position outputs - Part 2: Guidance 2016 IEC 0 for inspection and routine testing - Edition 2.0 2616 61003-1 Industrial-process control systems - Instruments with analogue inputs and twoor multi-position outputs - Part 1: Methods 2016 IEC 0 for evaluating performance - Edition 3.0 2617 61010-2-020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular 2016 IEC 0 requirements for laboratory centrifuges - Edition 3.0 2618 61010-1 AMD NULL 2016 IEC 0 1 2619 61010-2-011 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-011: Particular 2016 IEC 0 requirements for refrigerating equipment - Edition 1.0 2620 61010-2-012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-012: Particular 2016 IEC 0 requirements for climatic and environmental testing and other temperature conditioning equipment - Edition 1.0 2621 61010-2-020 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-020: Particular 2016 IEC 0 (REDLINE + requirements for laboratory centrifuges - Edition 3.0 ST 2622 61290-4-1 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method - Edition 2.0 2016 IEC 0 2623 61300-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 1: General and 2016 IEC 0 guidance - Edition 4.0 2624 61300-2-37 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-37: Tests 2016 IEC 0 Cable bending for fibre optic closures - Edition 3.0 2625 61291-2 Optical amplifiers Part 2: Single channel applications Performance specification template - Edition 4.0 2016 IEC 0 2626 61260-2 Electroacoustics Octave-band and fractional-octave-band filters Part 2: Pattern-evaluation tests - Edition 1.1; Consolidated 2016 IEC 0 Reprint 2627 61260-3 Electroacoustics Octave-band and fractional-octave-band filters Part 3: Periodic tests - Edition 1.0 2016 IEC 0 2628 61303 CORR 1 Medical electrical equipment Radionuclide calibrators Particular methods for describing performance - Edition 1.0 2016 IEC 0 2629 61332 Soft Ferrite Material Classification - Edition 3.0 2016 IEC 0 2630 61300-2-47 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-47: Tests 2016 IEC 0 Thermal shocks - Edition 4.0 2631 61300-3-25 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: 2016 IEC 0 Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed - Edition 3.0 2632 61189-2-719 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-719: Test 2016 IEC 0 methods for materials for interconnection structures Relative permittivity and loss tangent (500 MHz to 10 GHz) - Edition 1.0 2633 61180 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment - 2016 IEC 0 Edition 1.0 2634 61169-54 Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer 2016 IEC 0 series 4,3-10 - Edition 1.0 ,_خ conductor, nominal characteristic impedance 50 2635 61169-58 Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - 2016 IEC 0 type SBMA) - Edition 1.0) _خ Characteristic impedance 50 2636 61189-3-719 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 3-719: Test 2016 IEC 0 methods for interconnection structures (printed boards) Monitoring of single plated-through hole (PTH) resistance change during te 2637 61189-3-913 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 3-913: Test 2016 IEC 0 method for thermal conductivity of printed circuit boards for high-brightness LEDs - Edition 1.0 2638 61189-5-1 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-1: General 2016 IEC 0 test methods for materials and assemblies Guidance for printed board assemblies - Edition 1.0 2639 61196-11 Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric - 2016 IEC 0 Edition 1.0 2640 61196-10 Coaxial communication cables Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) 2016 IEC 0 CORR 1 dielectric - Edition 1.0 2641 61196-1-209 Coaxial communication cables Part 1-209: Environmental test methods Thermal cycling - Edition 1.0 2016 IEC 0 2642 61196-1-215 Coaxial communication cables Part 1-215: Environmental test methods High temperature cable ageing - Edition 1.0 2016 IEC 0 2643 61196-11-1 Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric 2016 IEC 0 - Edition 1.0 2644 61196-1-110 Coaxial communication cables Part 1-110: Electrical test methods Test for continuity - Edition 1.0 2016 IEC 0 2645 61204-7 Low-voltage switch mode power supplies Part 7: Safety requirements - Edition 2.0 2016 IEC 0 2646 61215-1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1: Test requirements - Edition 1.0 2016 IEC 0 2647 61215-1-1 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing 2016 IEC 0 of crystalline silicon photovoltaic (PV) modules - Edition 1.0 2648 61215-1-2 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-2: Special requirements for testing of 2016 IEC 0 thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules - Edition 1.0 2649 61215-1-3 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-3: Special requirements for testing of 2016 IEC 0 thin-film amorphous silicon based photovoltaic (PV) modules - Edition 1.0 2650 61215-1-4 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-4: Special requirements for testing of 2016 IEC 0 thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules - Edition 1.0 2651 61215-2 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 2: Test procedures - Edition 1.0 2016 IEC 0 2652 61196-4-1 Coaxial communication cables Part 4-1: Blank detail specification for radiating cables - Edition 1.0 2016 IEC 0 2653 61202-1 Fibre optic interconnecting devices and passive components Fibre optic isolators Part 1: Generic specification - Edition 2016 IEC 0 4.0 2654 61204-3 Low-voltage switch mode power supplies Part 3: Electromagnetic compatibility (EMC) - Edition 3.0 2016 IEC 0 (REDLINE + STANDA 2655 61204-3 Low-voltage switch mode power supplies Part 3: Electromagnetic compatibility (EMC) - Edition 3.0 2016 IEC 0 2656 61240 Piezoelectric devices Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and 2016 IEC 0 selection General rules - Edition 3.0 2657 61249-2-43 Materials for printed boards and other interconnecting structures Part 2-43: Reinforced base materials clad and unclad 2016 IEC 0 Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copp 2658 61249-2-44 Materials for printed boards and other interconnecting structures Part 2-44: Reinforced base materials clad and unclad 2016 IEC 0 Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-cla 2659 60674-2 Specification for plastic films for electrical purposes - Part 2: Methods of test - Edition 2.0 2016 IEC 0 2660 60670-23 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular 2016 IEC 0 requirements for floor boxes and enclosures - Edition 1.1 Consolidated Reprint 2661 60664-3 Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for 2016 IEC 0 protection against pollution - Edition 3.0 2662 60664-3 Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for 2016 IEC 0 (REDLINE + protection against pollution - Edition 3.0 STANDA 2663 60684-3-247 AMENDMENT 1 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 247: 2016 IEC 0 AMD 1 Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall - Edition 1.0 2664 60691 CORR 1 CORRIGENDUM 1 Thermal-links Requirements and application guide - Edition 4.0 2016 IEC 0 2665 60674-3-8 AMENDMENT 1- Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced 2016 IEC 0 AMD 1 biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation - Edition 1.0 2666 60674-3-8 Plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 8: Balanced biaxially oriented 2016 IEC 0 polyethylene naphthalate (PEN) films used for electrical insulation - Edition 1.1; Consolidate Reprint 2667 60728-11 Cable networks for television signals, sound signals and interactive services - Part 11: Safety - Edition 4.0 2016 IEC 0 2668 60708 CORR 1 CORRIGENDUM 1 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath - Edition 1.0 2016 IEC 0 2669 60702-3 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guidance for use - 2016 IEC 0 Edition 1.0 2670 60704-2-13 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-13: 2016 IEC 0 Particular requirements for range hoods and other cooking fume extractors - Edition 3.0 2671 60700-2 Thyristor valves for high voltage direct current (HVDC) power transmission Part 2: Terminology - Edition 1.0 2016 IEC 0 2672 60695-8-1 Fire hazard testing Part 8-1: Heat release General guidance - Edition 3.0 2016 IEC 0 2673 60695-8-2 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods - Edition 1.0 2016 IEC 0 2674 60695-10-3 Fire hazard testing Part 10-3: Abnormal heat Mould stress relief distortion test - Edition 2.0 2016 IEC 0 2675 60695-1-10 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines - 2016 IEC 0 (REDLINE + Edition 2.0 STA 2676 60695-1-10 Fire hazard testing Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines - 2016 IEC 0 Edition 2.0 2677 60695-11-20 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method - Edition 2.0 2016 IEC 0 CORR 1 2678 60695-11-5 Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and 2016 IEC 0 (REDLINE + guidance - Edition 2.0 STA 2679 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and 2016 IEC 0 guidance - Edition 2.0 2680 60695-1-20 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General 2016 IEC 0 guidance - Edition 1.0 2681 60695-1-21 Fire hazard testing Part 1-21: Guidance for assessing the fire hazard of electrotechnical products Ignitability Summary 2016 IEC 0 and relevance of test methods - Edition 1.0 2682 60793-1-20 Optical fibres Part 1-20: Measurement methods and test procedures Fibre geometry - Edition 2.0 2016 IEC 0 CORR 1 2683 60758 Synthetic quartz crystal Specifications and guidelines for use - Edition 5.0 2016 IEC 0 2684 60749-44 Semiconductor devices Mechanical and climatic test methods Part 44: Neutron beam irradiated single event effect (SEE) 2016 IEC 0 test method for semiconductor devices - Edition 1.0 2685 60731 Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy - Edition 3.1; Consolidated 2016 IEC 0 Reprint 2686 60747-5-6 Semiconductor devices - Part 5-6: Optoelectronic devices - Light emitting diodes - Edition 1.0 2016 IEC 0 2687 60747-5-7 Semiconductor devices - Part 5-7: Optoelectronic devices - Photodiodes and phototransistors - Edition 1.0 2016 IEC 0 2688 60747-6 Semiconductor devices - Part 6: Discrete devices - Thyristors - Edition 3.0 2016 IEC 0 2689 60747-2 Semiconductor devices - Part 2: Discrete devices - Rectifier diodes - Edition 3.0 2016 IEC 0 2690 60898-2 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit- 2016 IEC 0 breakers for AC and DC operation - Edition 2.0 2691 60904-3 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral 2016 IEC 0 (REDLINE + irradiance data - Edition 3.0 STANDA 2692 60904-3 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral 2016 IEC 0 irradiance data - Edition 3.0 2693 60909-0 Short-circuit currents in three-phase a.c. systems Part 0: Calculation of currents - Edition 2.0 2016 IEC 0 2694 60939-3 CORR PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION Part 3: Passive filter units 2016 IEC 0 1 for which safety tests are appropriate - Edition 1.0 2695 60947-2 NULL 2016 IEC 0 (REDLINE + STANDA 2696 60947-2 CORR Low-voltage switchgear and controlgear Part 2: Circuit-breakers - Edition 5.0 2016 IEC 0 1 2697 60947-2 Low-voltage switchgear and controlgear Part 2: Circuit-breakers - Edition 5.0 2016 IEC 0 2698 60966-2-4 Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV 2016 IEC 0 receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors - Edition 4.0 2699 60965 Nuclear power plants Control rooms Supplementary control room for reactor shutdown without access to the main control 2016 IEC 0 room - Edition 3.0 2700 60958-4-1 Digital audio interface - Part 4-1: Professional applications - Audio content - Edition 1.0 2016 IEC 0 2701 60958-4-2 Digital audio interface Part 4-2: Professional applications Metadata and subcode - Edition 1.0 2016 IEC 0 2702 60958-4-4 Digital audio interface Part 4-4: Professional applications Physical and electrical parameters - Edition 1.0 2016 IEC 0 2703 60947-5-1 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical 2016 IEC 0 (REDLINE + control circuit devices - Edition 4.0 STAN 2704 60947-5-1 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical 2016 IEC 0 CORR 1 control circuit devices - Edition 4.0 2705 60947-5-1 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical 2016 IEC 0 control circuit devices - Edition 4.0 2706 60950-22 Information technology equipment Safety Part 22: Equipment to be installed outdoors - Edition 2.0 2016 IEC 0 (REDLINE + STAND 2707 60950-22 Information technology equipment Safety Part 22: Equipment to be installed outdoors - Edition 2.0 2016 IEC 0 2708 60966-2-6 Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers 2016 IEC 0 Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors - Edition 4.0 2709 60966-2-5 Radio frequency and coaxial cable assemblies Part 2-5: Detail specification for cable assemblies for radio and TV receivers 2016 IEC 0 Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors - Edition 4.0 2710 60969 Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements - Edition 2.0 2016 IEC 0 (REDLINE + STANDARD 2711 60969 Self-Ballasted Lamps for General Lighting Services - Performance Requirements - Edition 2.0 2016 IEC 0 2712 60974-4 Arc welding equipment Part 4: Periodic inspection and testing - Edition 3.0 2016 IEC 0 2713 60990 Methods of measurement of touch current and protective conductor current - Edition 3.0 2016 IEC 0 (REDLINE + STANDARD 2714 60990 Methods of measurement of touch current and protective conductor current - Edition 3.0 2016 IEC 0 2715 60851-4 Winding wires Test methods Part 4: Chemical properties - Edition 3.0 2016 IEC 0 2716 60855-1 Live working Insulating foam-filled tubes and solid rods Part 1: Tubes and rods of a circular cross-section - Edition 2.0 2016 IEC 0 2717 60838-2-3 Miscellaneous lampholders Part 2-3: Particular requirements Lampholders for double-capped linear LED lamps - Edition 2016 IEC 0 1.0 2718 60839-5-2 Alarm and electronic security systems Part 5-2: Alarm transmission systems Requirements for supervised premises 2016 IEC 0 transceiver (SPT) - Edition 2.0 2719 60839-5-3 Alarm and electronic security systems Part 5-3: Alarm transmission systems Requirements for receiving centre transceiver 2016 IEC 0 (RCT) - Edition 1.0 2720 60839-11-31 Alarm and electronic security systems Part 11-31: Electronic access control systems Core interoperability protocol based 2016 IEC 0 on Web services - Edition 1.0 2721 60839-11-32 Alarm and electronic security systems Part 11-32: Electronic access control systems Access control monitoring based on 2016 IEC 0 Web services - Edition 1.0 2722 60838-1 Miscellaneous lampholders - Part 1: General requirements and tests - Edition 5.0 2016 IEC 0 (REDLINE + STANDA 2723 60838-1 Miscellaneous lampholders Part 1: General requirements and tests - Edition 5.1; Consolidated Reprint 2016 IEC 0 2724 60794-2-22 Optical fibre cables Part 2-22: Indoor cables Detail specification for multi-simplex breakout optical cables to be 2016 IEC 0 terminated with connectors - Edition 1.0 2725 60794-3-20 Optical fibre cables Part 3-20: Outdoor cables Family specification for self-supporting aerial telecommunication cables - 2016 IEC 0 Edition 3.0 2726 60794-3-70 Optical fibre cables Part 3-70: Outdoor cables Family specification for outdoor optical fibre cables for rapid/multiple 2016 IEC 0 deployment - Edition 1.0 2727 60195 Method of Measurement of Current Noise Generated in Fixed Resistors - Edition 2.0 2016 IEC 0 2728 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements - Edition 6.0 2016 IEC 0 (REDLINE + STANDA 2729 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements - Edition 6.0 2016 IEC 0 2730 60205 Calculation of the effective parameters of magnetic piece parts - Edition 4.0 2016 IEC 0 2731 60215 Safety requirements for radio transmitting equipment General requirements and terminology - Edition 4.0 2016 IEC 0 2732 60238 Edison screw lampholders - Edition 9.0 2016 IEC 0 (REDLINE + STANDARD 2733 60238 Edison screw lampholders - Edition 9.1 Consolidated Reprint 2016 IEC 0 2734 60311 Electric irons for household or similar use Methods for measuring performance - Edition 5.0 2016 IEC 0 2735 60310 Railway applications - Traction transformers and inductors on board rolling stock - Edition 4.0 2016 IEC 0 2736 60269-4 Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices - Edition 2016 IEC 0 5.2; Consolidated Reprint 2737 60269-2 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial 2016 IEC 0 application) Examples of standardized systems of fuses A to K - Edition 5.1 Consolidated Reprint 2738 60191-6-13 Mechanical standardization of semiconductor devices Part 6-13: Design guideline of open-top-type sockets for Fine-pitch 2016 IEC 0 Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA) - Edition 2.0 2739 60153-2 Hollow metallic waveguides Part 2: Relevant specifications for ordinary rectangular waveguides - Edition 3.0 2016 IEC 0 2740 60153-1 Hollow Metallic Waveguides Part 1: General Requirements and Measuring Methods - Edition 2.0 2016 IEC 0 2741 60154-1 Flanges for waveguides - Part 1: General requirements - Edition 3.0 2016 IEC 0 2742 60154-2 Flanges for waveguides Part 2: Relevant specifications for flanges for ordinary rectangular waveguides - Edition 3.0 2016 IEC 0 2743 60092-504 Electrical installations in ships Part 504: Automation, control and instrumentation - Edition 4.0 2016 IEC 0 2744 60092-504 Electrical installations in ships Part 504: Automation, control and instrumentation - Edition 4.0 2016 IEC 0 (REDLINE + STAN 2745 60127-5 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links - Edition 2.0 2016 IEC 0 2746 60118-13 Electroacoustics Hearing aids Part 13: Electromagnetic compatibility (EMC) - Edition 4.0 2016 IEC 0 2747 60076-10-1 Power transformers - Part 10-1: Determination of sound levels Application guide - Edition 2.0 2016 IEC 0 2748 60076-10 Power Transformers - Part 10: Determination of Sound Levels - Edition 2.0 2016 IEC 0 2749 60068-3-13 Environmental testing Part 3-13: Supporting documentation and guidance on Test T Soldering - Edition 1.0 2016 IEC 0 2750 60065 CORR 2 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS SAFETY REQUIREMENTS - Edition 8.0 2016 IEC 0 2751 60061-3 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2016 IEC 0 DATABASE SNAPSHOT 2752 60062 CORR 1 MARKING CODES FOR RESISTORS AND CAPACITORS - Edition 6.0 2016 IEC 0 2753 60062 Marking codes for resistors and capacitors - Edition 6.0 2016 IEC 0 2754 60061-4 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: Guidelines and general 2016 IEC 0 DATABASE information SNAPSHOT 2755 60079-14 Explosive atmospheres Part 14: Electrical installations design, selection and erection - Edition 5.0 2016 IEC 0 CORR 1 2756 60079-15 INT 1 EXPLOSIVE ATMOSPHERES Part 15: Equipment protection by type of protection "n" - Edition 4.0 2016 IEC 0 2757 60079-29-1 Explosive atmospheres Part 29-1: Gas detectors Performance requirements of detectors for flammable gases - Edition 2.0 2016 IEC 0 2758 60079-7 INT 1 EXPLOSIVE ATMOSPHERES Part 7: Equipment protection by increased safety 'e' - Edition 5.0 2016 IEC 0 2759 60086-3 Primary batteries Part 3: Watch batteries - Edition 4.0 2016 IEC 0 (REDLINE + STANDA 2760 60086-3 Primary batteries - Part 3: Watch batteries - Edition 4.0 2016 IEC 0 2761 60086-5 Primary batteries Part 5: Safety of batteries with aqueous electrolyte - Edition 4.0 2016 IEC 0 2762 60092-202 Electrical installations in ships Part 202: System design Protection - Edition 5.0 2016 IEC 0 2763 60092-202 Electrical installations in ships Part 202: System design Protection - Edition 5.0 2016 IEC 0 (REDLINE + STAN 2764 60092-353 Electrical installations in ships Part 353: Power cables for rated voltages 1 kV and 3 kV - Edition 4.0 2016 IEC 0 (REDLINE + STAN 2765 60092-353 Electrical installations in ships Part 353: Power cables for rated voltages 1 kV and 3 kV - Edition 4.0 2016 IEC 0 2766 60050-192 AMENDMENT 1 International Electrotechnical Vocabulary Part 192: Dependability - Edition 1.0 2016 IEC 0 AMD 1 2767 60050-300 AMENDMENT 2 International electrotechnical vocabulary Electrical and electronic measurements and measuring 2016 IEC 0 AMD 2 instruments Part 314: Specific terms according to the type of instrument - Edition 1.0 2768 60050-351 AMENDMENT 1 International electrotechnical vocabulary - Part 351: Control technology - Edition 4.0 2016 IEC 0 AMD 1 2769 60050-161 AMENDMENT 6 International electrotechnical vocabulary Part 161: Electromagnetic compatibility - Edition 1.0 2016 IEC 0 AMD 6 2770 60050-482 AMENDMENT 1 International Electrotechnical Vocabulary Part 482: Primary and secondary cells and batteries - Edition 2016 IEC 0 AMD 1 1.0 2771 60050-561 AMENDMENT 1 International electrotechnical vocabulary Part 561: Piezoelectric, dielectric and electrostatic devices and 2016 IEC 0 AMD 1 associated materials for frequency control, selection and detection - Edition 2.0 2772 60050-395 AMENDMENT 1 International Electrotechnical Vocabulary Part 395: Nuclear instrumentation: Physical phenomena, 2016 IEC 0 AMD 1 basic concepts, instruments, systems, equipment and detectors - Edition 1.0 2773 60034-12 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors - Edition 3.0 2016 IEC 0 (REDLINE + STAND 2774 60034-12 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors - Edition 3.0 2016 IEC 0 2775 60050-845 AMENDMENT 1 International electrotechnical vocabulary Part 845: Lighting - Edition 1.0 2016 IEC 0 AMD 1 2776 60050-904 AMENDMENT 2 International Electrotechnical Vocabulary Part 904: Environmental standardization for electrical and 2016 IEC 0 AMD 2 electronic products and systems - Edition 1.0 2777 60050-732 AMENDMENT 2 International Electrotechnical Vocabulary Part 732: Computer network technology - Edition 1.0 2016 IEC 0 AMD 2 2778 60050-731 Amendment 1 International Electrotechnical Vocabulary - Chapter 731: Optical Fibre Communication - Edition 1.0 2016 IEC 0 AMD 1 2779 60050-725 AMENDMENT 1 International electrotechnical vocabulary - Part 725: Space radiocommunications - Edition 2.0 2016 IEC 0 AMD 1 2780 60050-726 AMENDMENT 1 International electrotechnical vocabulary Part 726: Transmission lines and waveguides - Edition 1.0 2016 IEC 0 AMD 1 2781 60050-815 AMENDMENT 1 International Electrotechnical Vocabulary Part 815: Superconductivity - Edition 2.0 2016 IEC 0 AMD 1 2782 60050-705 AMENDMENT 2 International electrotechnical vocabulary - Part 705: Radio wave propagation - Edition 1.0 2016 IEC 0 AMD 2 2783 60050-713 AMENDMENT 1 International electrotechnical vocabulary - Part 713: Radiocommunications: transmitters, receivers, 2016 IEC 0 AMD 1 networks and operation - Edition 1.0 2784 60050-704 AMENDMENT 1 International electrotechnical vocabulary - Part 704: Transmission - Edition 1.0 2016 IEC 0 AMD 1 2785 60050-702 AMENDMENT 1 International Electrotechnical Vocabulary Chapter 702: Oscillations, signals and related devices - 2016 IEC 0 AMD 1 Edition 1.0 2786 60050-702 AMENDMENT 2 International Electrotechnical Vocabulary Chapter 702: Oscillations, signals and related devices - 2016 IEC 0 AMD 2 Edition 1.0 2787 60050-723 AMENDMENT 2 International Electrotechnical Vocabulary - Chapter 723: Broadcasting: Sound, Television, Data - 2016 IEC 0 AMD 2 Edition 1.0 2788 60050-721 AMENDMENT 1 International Electrotechnical Vocabulary Chapter 721: Telegraphy, Facsimile and Data Communication 2016 IEC 0 AMD 1 - Edition 1.0 2789 60050-715 AMENDMENT 1 International electrotechnical vocabulary - Part 715: Telecommunication networks, teletraffic and 2016 IEC 0 AMD 1 operation - Edition 1.0 2790 60050-714 AMENDMENT 1 International electrotechnical vocabulary - Part 714: Switching and signalling in telecommunications - 2016 IEC 0 AMD 1 Edition 1.0 2791 60050-701 AMENDMENT 1 International Electrotechnical Vocabulary Chapter 701: Telecommunications, Channels and Networks - 2016 IEC 0 AMD 1 Edition 1.0 2792 60050-614 International electrotechnical vocabulary Part 614: Generation, transmission and distribution of electricity Operation - 2016 IEC 0 Edition 1.0 2793 60061-3 AMD Amendment 52 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: 2016 IEC 0 52 Gauges - Edition 3.44 2794 60061-2 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders 2016 IEC 0 DATABASE SNAPSHOT 2795 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps 2016 IEC 0 DATABASE SNAPSHOT 2796 60061-2 AMD Amendment 51 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2016 IEC 0 51 Lampholders - Edition 3.32 2797 60061-1 AMD Amendment 54 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp 2016 IEC 0 54 caps - Edition 3.35 2798 60061-1 AMD Amendment 55 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2016 IEC 0 55 caps - Edition 3.55 2799 60051-1 Direct acting indicating analogue electrical measuring instruments and their accessories Part 1: Definitions and general 2016 IEC 0 requirements common to all parts - Edition 6.0 2800 60335-2-109 Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment 2016 IEC 0 appliances - Edition 1.2 Consolidated Reprint 2801 60335-2-105 Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower 2016 IEC 0 cabinets - Edition 2.0 2802 60335-1 Household and similar electrical appliances Safety Part 1: General requirements - Edition 5.2; Consolidated Reprint 2016 IEC 0 2803 60335-2-34 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors - Edition 5.2 2016 IEC 0 Consolidated Reprint 2804 60335-2-31 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking 2016 IEC 0 fume extractors - Edition 5.1; Consolidated Reprint 2805 60335-2-40 Household and similar electrical appliances Safety Part 2-40: Particular requirements for electrical heat pumps, air- 2016 IEC 0 conditioners and dehumidifiers - Edition 5.1; Consolidated Reprint 2806 60335-2-35 AMENDMENT 1 Household and similar electrical appliances Safety Part 2-35: Particular requirements for instantaneous 2016 IEC 0 AMD 1 water heaters - Edition 5.1 2807 60335-2-35 Household and similar electrical appliances Safety Part 2-35: Particular requirements for instantaneous water heaters - 2016 IEC 0 Edition 5.1 2808 60335-2-2 Household and similar electrical appliances Safety Part 2-2: Particular requirements for vacuum cleaners and water- 2016 IEC 0 suction cleaning appliances - Edition 6.2 Consolidated Reprint 2809 60335-2-23 Household and similar electrical appliances Safety Part 2-23: Particular requirements for appliances for skin or hair care - 2016 IEC 0 (REDLINE + Edition 6.0 STA 2810 60335-2-23 Household and similar electrical appliances Safety Part 2-23: Particular requirements for appliances for skin or hair care - 2016 IEC 0 Edition 6.0 2811 60335-2-113 Household and similar electrical appliances Safety Part 2-113: Particular requirements for cosmetic and beauty care 2016 IEC 0 appliances incorporating lasers and intense light sources - Edition 1.0 2812 60335-2-13 Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and 2016 IEC 0 similar appliances - Consolidated Version; Edition 6.1 2813 60335-2-15 Household and similar electrical appliances Safety Part 2-15: Particular requirements for appliances for heating liquids - 2016 IEC 0 Edition 6.1; Consolidated Reprint 2814 60335-2-14 Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines - Edition 6.0 2016 IEC 0 (REDLINE + STA 2815 60335-2-14 Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines - Edition 6.0 2016 IEC 0 2816 60335-2-27 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-27: Particular requirements for 2016 IEC 0 AMD 2 CORR appliances for skin exposure to optical radiation - Edition 5.2; Consolidated Reprint 2 2817 60335-2-30 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters - Edition 2016 IEC 0 5.1;Consolidated Reprint 2818 60335-2-29 Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers - Edition 5.0 2016 IEC 0 (REDLINE + STA 2819 60335-2-29 Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers - Edition 5.0 2016 IEC 0 2820 60335-2-87 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning 2016 IEC 0 equipment - Edition 3.0 2821 60335-2-97 Household and similar electrical appliances Safety Part 2-97: Particular requirements for drives for shutters, awnings, 2016 IEC 0 blinds and similar equipment - Edition 3.0 2822 60335-2-9 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar 2016 IEC 0 portable cooking appliances - Edition 6.2 Consolidated Reprint 2823 60335-2-79 Household and similar electrical appliances Safety Part 2-79: Particular requirements for high pressure cleaners and steam 2016 IEC 0 cleaners - Edition 4.0 2824 60335-2-72 Household and similar electrical appliances Safety Part 2-72: Particular requirements for floor treatment machines with or 2016 IEC 0 without traction drive, for commercial use - Edition 4.0 2825 60335-2-7 Household and similar electrical appliances Safety Part 2-7: Particular requirements for washing machines - Edition 7.2 2016 IEC 0 Consolidated Reprint 2826 60335-2-69 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, 2016 IEC 0 (REDLINE + including power brush, for commercial use - Edition 5.0 STA 2827 60335-2-69 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, 2016 IEC 0 including power brush, for commercial use - Edition 4.0 2828 60335-2-68 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for 2016 IEC 0 commercial use - Edition 4.1; Consolidated Reprint 2829 60335-2-67 Household and similar electrical appliances Safety Part 2-67: Particular requirements for floor treatment machines, for 2016 IEC 0 commercial use - Edition 4.1; Consolidated Reprint 2830 60384-3 Fixed capacitors for use in electronic equipment Part 3: Sectional specification Surface mount fixed tantalum electrolytic 2016 IEC 0 capacitors with solid (MnO2) electrolyte - Edition 4.0 2831 60384-4 Fixed capacitors for use in electronic equipment Part 4: Sectional specification Fixed aluminium electrolytic capacitors 2016 IEC 0 with solid (MnO2) and non-solid electrolyte - Edition 5.0 2832 60417 Database Snapshot - Graphical symbols for use on equipment 2016 IEC 0 DATABASE SNAPSHOTS 2833 60404-8-6 Magnetic materials Part 8-6: Specifications for individual materials - Soft magnetic metallic materials - Edition 3.0 2016 IEC 0 2834 60404-1 Magnetic materials Part 1: Classification - Edition 3.0 2016 IEC 0 2835 60404-15 Magnetic materials Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic 2016 IEC 0 materials - Edition 1.1 Consolidated Reprint 2836 60404-10 Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium 2016 IEC 0 frequencies - Edition 2.0 2837 60384-14 NULL 2016 IEC 0 CORR 1 2838 60384-14 Fixed capacitors for use in electronic equipment Part 14: Sectional specification Fixed capacitors for electromagnetic 2016 IEC 0 interference suppression and connection to the supply mains - Edition 4.1; Consolidated Reprint 2839 60384-14-1 Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification Fixed capacitors for electromagnetic 2016 IEC 0 interference suppression and connection to the supply mains Assessment level DZ - Edition 3.0 2840 60384-14-2 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagnetic 2016 IEC 0 interference suppression and connection to the supply mains Safety tests only - Edition 2.0 2841 60384-18 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface 2016 IEC 0 mount capacitors with solid (MnO2) and non-solid electrolyte - Edition 3.0 2842 60384-1 Fixed capacitors for use in electronic equipment Part 1: Generic specification - Edition 5.0 2016 IEC 0 2843 60384-1 Fixed capacitors for use in electronic equipment Part 1: Generic specification - Edition 5.0 2016 IEC 0 (REDLINE + STANDA 2844 60364-5-55 AMENDMENT 2 Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other 2016 IEC 0 AMD 2 equipment - Edition 2.1 2845 60364-6 Low-voltage electrical installations Part 6: Verification - Edition 2.0 2016 IEC 0 2846 60350-1 Household electric cooking appliances Part 1: Ranges, ovens, steam ovens and grills Methods for measuring performance 2016 IEC 0 - Edition 2.0 2847 60350-1 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills Methods for measuring performance 2016 IEC 0 (REDLINE + - Edition 2.0 STANDA 2848 60519-12 Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared 2016 IEC 0 electroheating - Edition 2.0 2849 60444-8 Measurement of quartz crystal unit parameters Part 8: Test fixture for surface mounted quartz crystal units - Edition 2.0 2016 IEC 0 2850 60603-7-82 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed 2016 IEC 0 connectors, for data transmission with frequencies up to 2 000 MHz - Edition 1.0 2851 60601-2-6 Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of 2016 IEC 0 microwave therapy equipment - Edition 2.1; Consolidated Reprint 2852 60617 Graphical symbols for diagrams 2016 IEC 0 DATABASE SNAPSHOTS 2853 60601-2-40 Medical electrical equipment Part 2-40: Particular requirements for the basic safety and essential performance of 2016 IEC 0 electromyographs and evoked response equipment - Edition 2.0 2854 60601-2-46 Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of 2016 IEC 0 (REDLINE + operating tables - Edition 3.0 STA 2855 60601-2-46 Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of 2016 IEC 0 operating tables - Edition 3.0 2856 60601-2-50 Medical electrical equipment Part 2-50: Particular requirements for the basic safety and essential performance of infant 2016 IEC 0 phototherapy equipment - Edition 2.1 2857 60601-2-3 Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short- 2016 IEC 0 wave therapy equipment - Edition 3.1; Consolidated Reprint 2858 60601-2-10 Medical electrical equipment Part 2-10: Particular requirements for the basic safety and essential performance of nerve and 2016 IEC 0 muscle stimulators - Edition 2.1 2859 60601-2-21 Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant 2016 IEC 0 radiant warmers - Edition 2.1; Consolidated Reprint 2860 60601-2-20 Medical electrical equipment Part 2-20: Particular requirements for the basic safety and essential performance of infant 2016 IEC 0 transport incubators - Edition 2.1 Consolidated Reprint 2861 60601-2-19 Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant 2016 IEC 0 incubators - Edition 2.1; Consolidated Reprint 2862 60539-1 Directly heated negative temperature coefficient thermistors Part 1: Generic specification - Edition 3.0 2016 IEC 0 2863 60598-1 INT 1 LUMINAIRES - Part 1: General requirements and tests - Edition 8.0 2016 IEC 0 2864 60598-2-13 Luminaires Part 2-13: Particular requirements Ground recessed luminaires - Edition 1.2; Consolidated Reprint 2016 IEC 0 2865 60598-2-21 LUMINAIRES Part 2-21: Particular requirements Rope lights - Edition 1.0 2016 IEC 0 CORR 1 2866 60598-2-22 LUMINAIRES Part 2-22: Particular requirements Luminaires for emergency lighting - Edition 4.0 2016 IEC 0 CORR 2 2867 TS 62885-1 Surface cleaning appliances Part 1: General requirements on test material and test equipment - Edition 1.0 2016 IEC 0 2868 TS 62886 Electroacoustics Hearing aids Method for measuring electroacoustic performance up to 16 kHz - Edition 1.0 2016 IEC 0 2869 TS 62941 Terrestrial photovoltaic (PV) modules - Guidelines for increased confidence in PV module design qualification and type 2016 IEC 0 approval - Edition 1.0 2870 TS 62965 Fibre optic interconnecting devices and passive components - Ferrule assembly and fusion splicer interface dimensions for 2016 IEC 0 a fusion splice on connector - Edition 1.0 2871 TS 62972 General lighting Organic light emitting diode (OLED) products and related equipment Terms and definitions - Edition 1.0 2016 IEC 0 2872 TS 62840-1 Electric vehicle battery swap system Part 1: General and guidance - Edition 1.0 2016 IEC 0 2873 TS 62844 Guidelines for quality and risk assessment for nano-enabled electrotechnical products - Edition 1.0 2016 IEC 0 2874 TS 62832-1 Industrial-process measurement, control and automation Digital factory framework Part 1: General principles - Edition 1.0 2016 IEC 0 2875 TS 62332-3 Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Part 3: Hermetic motor- 2016 IEC 0 compressors - Edition 1.0 2876 TS 62257-9-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems Selection 2016 IEC 0 (REDLINE + S of stand-alone lighting kits for rural electrification - Edition 3.0 2877 TS 62257-9-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems Selection 2016 IEC 0 of stand-alone lighting kits for rural electrification - Edition 3.0 2878 TS 62257-9-4 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-4: Integrated systems User 2016 IEC 0 installation - Edition 2.0 2879 TS 62257-9-3 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-3: Integrated systems User 2016 IEC 0 interface - Edition 2.0 2880 TS 62257-9-2 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-2: Integrated systems 2016 IEC 0 Microgrids - Edition 2.0 2881 TS 62257-9-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-1: Integrated systems 2016 IEC 0 Micropower systems - Edition 2.0 2882 TS 62564-1 Process management for avionics Aerospace qualified electronic components (AQEC) Part 1: Integrated circuits and 2016 IEC 0 discrete semiconductors - Edition 3.0 2883 TS 62436 Guideline for implementation of copy controlled multimedia interface - Edition 1.1 2016 IEC 0 2884 TS 62478 High voltage test techniques Measurement of partial discharges by electromagnetic and acoustic methods - Edition 1.0 2016 IEC 0 2885 TS 62702-2 Audio archive system Part 2: Audio data preservation - Edition 1.0 2016 IEC 0 2886 TS 62715-5-2 Flexible display devices Part 5-2: Measuring methods of optical characteristics from the vantage point for curved displays 2016 IEC 0 - Edition 1.0 2887 TS 62668-2 Process management for avionics Counterfeit prevention Part 2: Managing electronic components from non-franchised 2016 IEC 0 sources - Edition 2.0 2888 TS 62668-1 Process management for avionics Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled 2016 IEC 0 electronic components - Edition 3.0 2889 TS 62627-09 Fibre optic interconnecting devices and passive components Vocabulary for passive optical devices - Edition 1.0 2016 IEC 0 2890 TS 62666 Guidelines for the inclusion of documentation aspects in product standards - Edition 2.0 2016 IEC 0 2891 TS 62735-2 Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in 2016 IEC 0 data centres and telecom central offices - Part 2: Plug and socket-outlet system for 5,2 kW - Edition 1.0 2892 TS 62736 Ultrasonics Pulse-echo scanners Simple methods for periodic testing to verify stability of an imaging systemâ__s 2016 IEC 0 elementary performance - Edition 1.0 2893 TS 62775 Application guidelines Technical and financial processes for implementing asset management systems - Edition 1.0 2016 IEC 0 2894 TS 62782 Photovoltaic (PV) modules Cyclic (dynamic) mechanical load testing - Edition 1.0 2016 IEC 0 2895 TS 62607-4-4 Nanomanufacturing Key control characteristics Part 4-4: Nano-enabled electrical energy storage Thermal characterization 2016 IEC 0 of nanomaterials, nail penetration method - Edition 1.0 2896 TS 62607-6-4 Nanomanufacturing Key control characteristics Part 6-4: Graphene Surface conductance measurement using resonant 2016 IEC 0 cavity - Edition 1.0 2897 TS 62580-2 Electronic railway equipment On-board multimedia and telematic subsystems for railways Part 2: Video 2016 IEC 0 surveillance/CCTV services - Edition 1.0 2898 TS 62600-102 Marine energy Wave, tidal and other water current converters Part 102: Wave energy converter power performance 2016 IEC 0 assessment at a second location using measured assessment data - Edition 1.0 2899 TS 62600-2 Marine energy Wave, tidal and other water current converters Part 2: Design requirements for marine energy systems - 2016 IEC 0 Edition 1.0 2900 TS 62607-4-2 Nanomanufacturing Key control characteristics Part 4-2: Nano-enabled electrical energy storage Physical characterization 2016 IEC 0 of cathode nanomaterials, density measurement - Edition 1.0 2901 TR 62689-100 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 100: Requirements and 2016 IEC 0 proposals for the IEC 61850 series data model extensions to support fault passage indicators applications - Edition 1.0 2902 TR 62691 Optical fibre cables - Guidelines to the installation of optical fibre cables - Edition 2.0 2016 IEC 0 2903 TR 63020 Digital sheet music Market, use cases, and related technologies - Edition 1.0 2016 IEC 0 2904 TR 63021 Rotating electrical machinery - Natural graphite brush for slip-ring in wound rotor-type induction motor - Application 2016 IEC 0 information - Edition 1.0 2905 TR 63036 Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems - Edition 1.0 2016 IEC 0 2906 TR 63037 Electrical interface specifications for self ballasted lamps and controlgear in phase-cut dimmed lighting systems - Edition 2016 IEC 0 1.0 2907 TR 63038 Conceptual model of standardization for multimedia car systems and equipment - Edition 1.0 2016 IEC 0 2908 TR 63039 Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state - Edition 1.0 2016 IEC 0 2909 TR 63040 Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm Test results of 2016 IEC 0 research on influencing parameters - Edition 1.0 2910 TR 63071 Power supplying scheme for wearable systems and equipment - Edition 1.0 2016 IEC 0 2911 TR 62899-250 Printed electronics Part 250: Material technologies required in printed electronics for wearable smart devices - Edition 1.0 2016 IEC 0 2912 TR 62901 Guidance for the selection of drop cables - Edition 1.0 2016 IEC 0 2913 TR 62921 Quantification methodology for greenhouse gas emissions for computers and monitors - Edition 2.0 2016 IEC 0 2914 TR 62935 Measurement methods - High dynamic range video - Edition 1.0 2016 IEC 0 2915 TR 62936 Test method development Guidelines for substance selection - Edition 1.0 2016 IEC 0 2916 TS 60479-1 Effects of current on human beings and livestock Part 1: General aspects - Edition 4.1; Consolidated Reprint 2016 IEC 0 2917 TS 60695-11-11 Fire hazard testing Part 11-11: Test flames Determination of the characteristic heat flux for ignition from a non-contacting 2016 IEC 0 flame source - Edition 2.0 2918 TS 60870-5-604 Telecontrol equipment and systems Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard - 2016 IEC 0 (REDLINE + Edition 2.0 2919 TS 60870-5-604 Telecontrol equipment and systems Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard - 2016 IEC 0 Edition 2.0 2920 TS 60815-4 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 4: Insulators for d.c. 2016 IEC 0 systems - Edition 1.0 2921 TR 62970 Guidance on how to conduct round robin tests for household and similar electrical appliances - Edition 1.0 2016 IEC 0 2922 TR 80001-2-8 Application of risk management for IT-networks incorporating medical devices Part 2-8: Application guidance Guidance 2016 IEC 0 on standards for establishing the security capabilities identified in IEC TR 80001-2-2 - Edition 1.0 2923 TR 62977-3-2 NULL 2016 IEC 0 2924 TS 60034-32 Rotating electrical machines Part 32: Measurement of stator end-winding vibration at form-wound windings - Edition 1.0 2016 IEC 0 2925 TS 60204-34 Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools - Edition 1.0 2016 IEC 0 2926 TS 60034-30-2 Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code) - Edition 1.0 2016 IEC 0 2927 TS 61189-3-301 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 3-301: Test 2016 IEC 0 methods for interconnection structures (printed boards) Appearance inspection method for plated surfaces on PWB - Edition 1.0 2928 TS 61508-3-1 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 3-1: Software requirements 2016 IEC 0 Reuse of pre-existing software elements to implement all or part of a safety function - Edition 1.0 2929 TS 61463 Bushings Seismic qualification - Edition 2.0 2016 IEC 0 2930 TS 61724-2 Photovoltaic system performance - Part 2: Capacity evaluation method - Edition 1.0 2016 IEC 0 2931 TS 61724-3 Photovoltaic system performance - Part 3: Energy evaluation method - Edition 1.0 2016 IEC 0 2932 TS 61836 Solar photovoltaic energy systems Terms, definitions and symbols - Edition 3.0 2016 IEC 0 (REDLINE + STAND 2933 TS 61836 Solar photovoltaic energy systems - Terms, definitions and symbols - Edition 3.0 2016 IEC 0 2934 TS 61400-26-3 Wind energy generation systems - Part 26-3: Availability for wind power stations - Edition 1.0 2016 IEC 0 2935 TS 62073 Guidance on the measurement of hydrophobicity of insulator surfaces - Edition 2.0 2016 IEC 0 2936 TS 61850-80-1 Communication networks and systems for power utility automation Part 80-1: Guideline to exchanging information from a 2016 IEC 0 CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 - Edition 2.0 2937 TS 61850-80-4 Communication networks and systems for power utility automation Part 80-4: Translation from the COSEM object model 2016 IEC 0 (IEC 62056) to the IEC 61850 data model - Edition 1.0 2938 TS 61970-555 Energy management system application program interface (EMS-API) Part 555: CIM based efficient model exchange 2016 IEC 0 format (CIM/E) - Edition 1.0 2939 TS 61970-556 Energy management system application program interface (EMS-API) Part 556: CIM based graphic exchange format 2016 IEC 0 (CIM/G) - Edition 1.0 2940 TS 62056-1-1 Electricity metering data exchange The DLMS/COSEM suite Part 1-1: Template for DLMS/COSEM communication 2016 IEC 0 profile standards - Edition 1.0 2941 TS 62056-6-9 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-9: Mapping between the Common Information 2016 IEC 0 Model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols - Edition 1.0 2942 TS 62056-8-20 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-20: Mesh communication profile for neighbourhood 2016 IEC 0 networks IEC - Edition 1.0 2943 TS 62056-9-1 Electricity metering data exchange - The DLMS/COSEM suite - Part 9-1: Communication profile using web-services to 2016 IEC 0 access a DLMS/COSEM server via a COSEM Access Service (CAS) - Edition 1.0 2944 TR 62351-12 Power systems management and associated information exchange - Data and communications security - Part 12: Resilience 2016 IEC 0 and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems - Edition 1.0 2945 TR 62351-13 Power systems management and associated information exchange - Data and communications security - Part 13: Guidelines 2016 IEC 0 on security topics to be covered in standards and specifications - Edition 1.0 2946 TR 62278-4 Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) - Part 2016 IEC 0 4: RAM risk and RAM life cycle aspects - Edition 1.0 2947 TR 62453-41 Field device tool (FDT) interface specification Part 41: Object model integration profile Common object model - Edition 2016 IEC 0 2.0 2948 TR 62453-42 Field device tool (FDT) interface specification - Part 42: Object model integration profile - Common Language 2016 IEC 0 Infrastructure - Edition 1.0 2949 TR 62366-2 Medical devices Part 2: Guidance on the application of usability engineering to medical devices - Edition 1.0 2016 IEC 0 2950 TR 62357-1 Power systems management and associated information exchange Part 1: Reference architecture - Edition 2.0 2016 IEC 0 2951 TR 62627-01 Fibre optic interconnecting devices and passive components Part 01: Fibre optic connector cleaning methods - Edition 2.0 2016 IEC 0 2952 TR 62544 High-voltage direct current (HVDC) systems Application of active filters - Edition 1.1; CONSOLIDATED REPRINT 2016 IEC 0 2953 TR 62541-2 OPC Unified Architecture Part 2: Security Model - Edition 2.0 2016 IEC 0 2954 TR 62541-1 OPC unified architecture Part 1: Overview and concepts - Edition 2.0 2016 IEC 0 2955 TR 61850-90-2 Communication networks and systems for power utility automation - Part 90-2: Using IEC 61850 for communication 2016 IEC 0 between substations and control centres - Edition 1.0 2956 TR 61850-90-3 Communication networks and systems for power utility automation Part 90-3: Using IEC 61850 for condition monitoring 2016 IEC 0 diagnosis and analysis - Edition 1.0 2957 TR 61850-90-8 Communication networks and systems for power utility automation - Part 90-8: Object model for E-mobility - Edition 1.0 2016 IEC 0 2958 TR 61901 Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) up to 2016 IEC 0 and including 500 kV (Um = 550 kV) - Edition 2.0 2959 TR 62001-1 High-voltage direct current (HVDC) systems Guidance to the specification and design evaluation of AC filters Part 1: 2016 IEC 0 Overview - Edition 1.0 2960 TR 62001-2 High-voltage direct current (HVDC) systems Guidance to the specification and design evaluation of AC filters Part 2: 2016 IEC 0 Performance - Edition 1.0 2961 TR 62001-3 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 3: 2016 IEC 0 Modelling - Edition 1.0 2962 TR 62001-4 High-voltage direct current (HVDC) systems Guidance to the specification and design evaluation of AC filters Part 4: 2016 IEC 0 Equipment - Edition 1.0 2963 TR 61948-1 Nuclear Medicine Instrumentation - Routine Tests - Part 1: Radiation Counting Systems - Edition 2.0 2016 IEC 0 2964 TR 62010 Analyser systems Maintenance management - Edition 2.0 2016 IEC 0 2965 TR 61282-14 Fibre optic communication system design guides Part 14: Determination of the uncertainties of attenuation measurements 2016 IEC 0 in fibre plants - Edition 1.0; Includes Access to Additional Content 2966 TR 61282-12 Fibre optic communication system design guides Part 12: In-band optical signal-to-noise ratio (OSNR) - Edition 1.0 2016 IEC 0 2967 TR 61282-9 Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and 2016 IEC 0 theory - Edition 2.0 2968 TR 61000-4-1 Electromagnetic compatibility (EMC) Part 4-1: Testing and measurement techniques Overview of the IEC 61000-4 series 2016 IEC 0 - Edition 1.0 2969 TR 61156-1-6 Multicore and symmetrical pair/quad cables for digital communications - Part 1-6: Nominal DC-resistance values of floor- 2016 IEC 0 wiring and work-area cables for digital communications - Edition 1.0 2970 TR 60919-3 Performance of high-voltage direct current (HVDC) systems with line-commutated converters Part 3: Dynamic conditions 2016 IEC 0 - Edition 2.1 2971 TR 61000-1-7 Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal 2016 IEC 0 conditions - Edition 1.0 2972 TR 60728-3-2 Cable networks for television signals, sound signals and interactive services Part 3-2: Method of measurement of 5th order 2016 IEC 0 non-linearity for active electronic equipment using five carriers - Edition 1.0 2973 TR 60601-4-2 Medical electrical equipment Part 4-2: Guidance and interpretation Electromagnetic immunity: performance of medical 2016 IEC 0 electrical equipment and medical electrical systems - Edition 1.0 2974 TR 60216-7-2 Electrical insulating materials Thermal endurance properties Part 7-2: Results of the round robin tests to validate 2016 IEC 0 procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data - Edition 1.0 2975 PAS 61076-3- Connectors for electronic equipment - Product requirements - Part 3-124: Detail specification for 10 way, shielded, free and 2016 IEC 0 124 fixed connectors for I/O and Gigabit transmission capability for industrial applications - Edition 1.0 2976 PAS 62264-6 Enterprise-control system integration Part 6: Messaging Service Model - Edition 1.0 2016 IEC 0 2977 PAS 62686-2 Process management for avionics Electronic components for aerospace, defence and high performance (ADHP) 2016 IEC 0 applications Part 2: General requirements for passive components - Edition 1.0 2978 PAS 63015 Definition of â__Low-Halogenâ__ for electronic products - Edition 1.0 2016 IEC 0 2979 PAS 63023 Medical electrical system Input interface for haemodialysis equipment for use of external alarming device - Edition 1.0 2016 IEC 0 2980 PAS 63062 Maritime navigation and radiocommunication equipment and systems Removable external data source (REDS) General 2016 IEC 0 requirements, methods of testing and required test results - Edition 1.0 2981 PAS 63077 Good refurbishment practices for medical imaging equipment - Edition 1.0 2016 IEC 0 2982 IEEE 61850-9-3 Communication networks and systems for power utility automation Part 9-3: Precision time protocol profile for power 2016 IEC 0 utility automation - Edition 1.0 2983 62271-212 High-voltage switchgear and controlgear Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) - 2016 IEC 0 Edition 1.0 2984 62276 Single crystal wafers for surface acoustic wave (SAW) device applications Specifications and measuring methods - Edition 2016 IEC 0 3.0 2985 62282-3-400 Fuel cell technologies - Part 3-400: Stationary fuel cell power systems - Small stationary fuel cell power system with 2016 IEC 0 combined heat and power output - Edition 1.0 2986 62281 Safety of primary and secondary lithium cells and batteries during transport - Edition 3.0 2016 IEC 0 (REDLINE + STANDARD 2987 62281 Safety of primary and secondary lithium cells and batteries during transport - Edition 3.0 2016 IEC 0 2988 62282-6-200 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods - Edition 3.0 2016 IEC 0 2989 62228-2 Integrated circuits EMC evaluation of transceivers Part 2: LIN transceivers - Edition 1.0 2016 IEC 0 2990 62226-3-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current 2016 IEC 0 density and internal electric field induced in the human body Part 3-1: Exposure to electric fields Analytical and 2D numerical mode 2991 62264-5 Enterprise-control system integration - Part 5: Business to manufacturing transactions - Edition 2.0 2016 IEC 0 2992 62264-3 Enterprise-control system integration Part 3: Activity models of manufacturing operations management - Edition 2.0 2016 IEC 0 2993 62135-1 CORR Resistance welding equipment Part 1: Safety requirements for design, manufacture and installation - Edition 2.0 2016 IEC 0 1 2994 62146-1 Grading capacitors for high-voltage alternating current circuit-breakers Part 1: General - Edition 1.1; Consolidated Reprint 2016 IEC 0 2995 62129-1 Calibration of wavelength/optical frequency measurement instruments Part 1: Optical spectrum analyzers - Edition 1.0 2016 IEC 0 2996 62209-1 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from 2016 IEC 0 hand-held and body-mounted wireless communication devices Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) - E 2997 62196-2 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 2: Dimensional 2016 IEC 0 compatibility and interchangeability requirements for a.c. pin and contact-tube accessories - Edition 2.0 2998 62153-4-16 Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency 2016 IEC 0 range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial s 2999 62153-4-7 Metallic communication cables test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring 2016 IEC 0 CORR 1 the transfer impedance and the screening or the coupling attenuation Tube in tube method - Edition 2.0 3000 62325-351 Framework for energy market communications Part 351: CIM European market model exchange profile - Edition 2.0 2016 IEC 0 3001 62326-20 Printed boards Part 20: Printed circuit boards for high-brightness LEDs - Edition 1.0 2016 IEC 0 3002 62343-1 Dynamic modules Part 1: Performance standards General conditions - Edition 1.0 2016 IEC 0 3003 62366-1 CORR Medical devices - Part 1: Application of usability engineering to medical devices - Edition 1.0 2016 IEC 0 1 3004 62361-100 Power systems management and associated information exchange Interoperability in the long term Part 100: CIM profiles 2016 IEC 0 to XML schema mapping - Edition 1.0 3005 62351-11 Power systems management and associated information exchange - Data and communications security - Part 11: Security 2016 IEC 0 for XML documents - Edition 1.0 3006 62343-4-1 Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch - Edition 1.0 2016 IEC 0 3007 62343-3-1 Dynamic modules Part 3-1: Performance specification templates Dynamic channel equalizers - Edition 2.0 2016 IEC 0 3008 62343-3-2 Dynamic modules Part 3-2: Performance specification templates Optical channel monitor - Edition 1.0 2016 IEC 0 3009 62317-12 Ferrite cores - Dimensions - Part 12: Ring cores - Edition 1.0 2016 IEC 0 3010 62317-4 CORR Ferrite cores Dimensions Part 4: RM-cores and associated parts - Edition 1.0 2016 IEC 0 1 3011 62320-2 Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) Part 2: AIS 2016 IEC 0 (REDLINE + AtoN Stations - Operational and performance requirements, methods of testing and required test results - Edition 2.0 STANDA 3012 62320-2 Maritime navigation and radiocommunication equipment and systems Automatic identification system (AIS) Part 2: AIS 2016 IEC 0 AtoN Stations Operational and performance requirements, methods of testing and required test results - Edition 2.0 3013 62396-1 Process management for avionics Atmospheric radiation effects Part 1: Accommodation of atmospheric radiation effects 2016 IEC 0 (REDLINE + via single event effects within avionics electronic equipment - Edition 2.0 STANDA 3014 62396-1 Process management for avionics Atmospheric radiation effects Part 1: Accommodation of atmospheric radiation effects 2016 IEC 0 via single event effects within avionics electronic equipment - Edition 2.0 3015 62424 Representation of process control engineering Requests in P&I diagrams and data exchange between P&ID tools 2016 IEC 0 and PCE-CAE tools - Edition 2.0 3016 62391-1 CORR Fixed electric double-layer capacitors for use in electric and electronic equipment Part 1: Generic specification - Edition 2016 IEC 0 1 2.0 3017 62477-1 AMD AMENDMENT 1 Safety requirements for power electronic converter systems and equipment - Part 1: General - Edition 2016 IEC 0 1 1.0 3018 62453-315 Field device tool (FDT) interface specification Part 315: Communication profile integration IEC 61784 CPF 15 - Edition 2016 IEC 0 1.1 3019 62453-309 Field device tool (FDT) interface specification Part 309: Communication profile integration IEC 61784 CPF 9 - Edition 2016 IEC 0 2.0 3020 62453-303-2 FIeld device tool (FDT) interface specification Part 303-2: Communication profile integration IEC 61784 CP 3/4, CP 3/5 2016 IEC 0 and CP 3/6 - Edition 1.1; Consolidated Reprint 3021 62453-303-1 Field device tool (FDT) interface specification Part 303-1: Communication profile integration IEC 61784 CP 3/1 and CP 2016 IEC 0 3/2 - Edition 1.1; Consolidated Reprint 3022 62453-302 Field device tool (FDT) interface specification Part 302: Communication profile integration IEC 61784 CPF 2 - Edition 2016 IEC 0 2.0 3023 62453-301 Field device tool (FDT) interface specification Part 301: Communication profile integration IEC 61784 CPF 1 - Edition 2016 IEC 0 1.1; Consolidated Reprint 3024 62453-2 Field device tool (FDT) interface specification Part 2: Concepts and detailed description - Edition 2.0 2016 IEC 0 3025 62439-5 Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) - 2016 IEC 0 Edition 2.0 3026 62439-1 Industrial communication networks High availability automation networks Part 1: General concepts and calculation 2016 IEC 0 methods - Edition 1.2; Consolidated Reprint 3027 62439-2 Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) - 2016 IEC 0 Edition 2.0 3028 62433-4 EMC IC modelling Part 4: Models of integrated circuits for RF immunity behavioural simulation Conducted immunity 2016 IEC 0 modelling (ICIM-CI) - Edition 1.0 3029 62453-1 Field device tool (FDT) interface specification Part 1: Overview and guidance - Edition 2.0 2016 IEC 0 3030 62446-1 Photovoltaic (PV) systems Requirements for testing, documentation and maintenance Part 1: Grid connected systems 2016 IEC 0 Documentation, commissioning tests and inspection - Edition 1.0 3031 62627-08 Fibre optic interconnecting devices and passive components Part 08: Study of optical power blocking measurement 2016 IEC 0 methods for adaptors with an optical power blocking shutter - Edition 1.0 3032 62629-22-1 3D display devices Part 22-1: Measuring methods for autostereoscopic displays Optical - Edition 2.0 2016 IEC 0 3033 62631-3-1 Dielectric and resistive properties of solid insulating materials Part 3-1: Determination of resistive properties (DC 2016 IEC 0 methods) Volume resistance and volume resistivity General method - Edition 1.0 3034 62625-1 CORR Electronic railway equipment - On board driving data recording system - Part 1: System specification - Edition 1.0 2016 IEC 0 1 3035 62625-2 Electronic railway equipment - On board driving data recording system Part 2: Conformity testing - Edition 1.0 2016 IEC 0 3036 62612 CORR 1 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V Performance requirements - Edition 2016 IEC 0 1.1 3037 62613-2 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional 2016 IEC 0 compatibility and interchangeability requirements for accessories to be used by various types of ships - Edition 2.0 3038 62595-1-2 Display lighting unit Part 1-2: Terminology and letter symbols - Edition 2.0 2016 IEC 0 3039 62591 Industrial networks - Wireless communication network and communication profiles - WirelessHART - Edition 2.0 2016 IEC 0 3040 62582-2 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring 2016 IEC 0 methods - Part 2: Indenter modulus - Edition 1.1; Consolidated Reprint 3041 62595-2-1 Display lighting unit - Part 2-1: Electro-optical measuring methods of LED backlight unit - Edition 1.0 2016 IEC 0 3042 62610-5 Mechanical structures for electrical and electronic equipment Thermal management for cabinets in accordance with IEC 2016 IEC 0 60297 and IEC 60917 series Part 5: Cooling performance evaluation for indoor cabinets - Edition 1.0 3043 62605 Multimedia systems and equipment Multimedia e-publishing and e-books Interchange format for e-dictionaries - Edition 2016 IEC 0 2.0 3044 62680-1-2 Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification - 2016 IEC 0 Edition 1.0 3045 62680-1-3 Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB 2016 IEC 0 Type-CTM cable and connector specification - Edition 1.0 3046 62689-1 Current and voltage sensors or detectors, to be used for fault passage indication purposes Part 1: General principles and 2016 IEC 0 requirements - Edition 1.0 3047 62689-2 Current and voltage sensors or detectors, to be used for fault passage indication purposes Part 2: System aspects - Edition 2016 IEC 0 1.0 3048 62679-3-3 Electronic paper displays - Part 3-3: Optical measuring methods for displays with integrated lighting units - Edition 1.0 2016 IEC 0 3049 62679-4-2 Electronic paper displays Part 4-2: Environmental test methods - Edition 1.0 2016 IEC 0 3050 62702-1-1 Audio archive system Part 1-1: DVD disk and data migration for long term audio data storage - Edition 1.0 2016 IEC 0 3051 62660-3 Secondary lithium-ion cells for the propulsion of electric road vehicles Part 3: Safety requirements - Edition 1.0 2016 IEC 0 3052 62646 Nuclear power plants Control rooms Computer based procedures - Edition 2.0 2016 IEC 0 3053 62548 Photovoltaic (PV) arrays Design requirements - Edition 1.0 2016 IEC 0 3054 62532 Fluorescent induction lamps Safety specifications - Edition 1.1; Consolidated Reprint 2016 IEC 0 3055 62563-1 Medical electrical equipment Medical image display systems Part 1: Evaluation methods - Edition 1.1 2016 IEC 0 3056 62572-3 Fibre optic active components and devices Reliability standards Part 3: Laser modules used for telecommunication - 2016 IEC 0 Edition 3.0 3057 62505-2 Railway applications Fixed installations Particular requirements for AC switchgear Part 2: Disconnectors, earthing 2016 IEC 0 switches and switches with nominal voltage above 1 kV - Edition 2.0 3058 62505-1 Railway applications Fixed installations Particular requirements for AC switchgear Part 1: Circuit-breakers with nominal 2016 IEC 0 voltage above 1 kV - Edition 2.0 3059 62877-1 Electrolyte and water for vented lead acid accumulators Part 1: Requirements for electrolyte - Edition 1.0 2016 IEC 0 3060 62877-2 Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water - Edition 1.0 2016 IEC 0 3061 62864-1 Railway applications Rolling stock Power supply with onboard energy storage system Part 1: Series hybrid system - 2016 IEC 0 Edition 1.0 3062 62885-2 Surface cleaning appliances Part 2: Dry vacuum cleaners for household or similar use Methods for measuring the 2016 IEC 0 performance - Edition 1.0 3063 62859 Nuclear power plants Instrumentation and control systems Requirements for coordinating safety and cybersecurity - 2016 IEC 0 Edition 1.0 3064 62873-2 Residual current operated circuit-breakers for household and similar use Part 2: Residual current devices (RCDs) 2016 IEC 0 Vocabulary - Edition 1.0 3065 62873-3-1 Residual current operated circuit-breakers for household and similar use Part 3-1: Particular requirements for RCDs with 2016 IEC 0 screwless-type terminals for external copper conductors - Edition 1.0 3066 62873-3-2 Residual current operated circuit-breakers for household and similar use Part 3-2: Particular requirements for RCDs with 2016 IEC 0 flat quick-connect terminations - Edition 1.0 3067 62873-3-3 Residual current operated circuit-breakers for household and similar use Part 3-3: Specific requirements for RCDs with 2016 IEC 0 screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with al 3068 62906-5-2 Laser display devices Part 5-2: Optical measuring methods of speckle contrast - Edition 1.0 2016 IEC 0 3069 62908-13-10 Touch and interactive displays - Part 13-10: Reliability test methods of touch displays - Environmental durability test 2016 IEC 0 methods - Edition 1.0 3070 62911 Audio, video and information technology equipment Routine electrical safety testing in production - Edition 1.0 2016 IEC 0 3071 62894 AMD 1 AMENDMENT 1- Photovoltaic inverters Data sheet and name plate - Edition 1.0 2016 IEC 0 3072 62894 Photovoltaic inverters - Data sheet and name plate - Edition 1.1; Consolidate Reprint 2016 IEC 0 3073 62899-201 Printed electronics Part 201: Materials Substrates - Edition 1.0 2016 IEC 0 3074 62899-202 Printed electronics Part 202: Materials Conductive ink - Edition 1.0 2016 IEC 0 3075 62917 Railway applications Fixed installations Electric traction Copper and copper alloy grooved contact wires - Edition 1.0 2016 IEC 0 3076 62922 Organic light emitting diode (OLED) panels for general lighting Performance requirements - Edition 1.0 2016 IEC 0 3077 62925 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability - 2016 IEC 0 Edition 1.0 3078 62940 Maritime navigation and radiocommunication equipment and systems Integrated communication system (ICS) 2016 IEC 0 Operational and performance requirements, methods of testing and required test results - Edition 1.0 3079 62944 Audio, video and multimedia systems and equipment Digital television accessibility Functional specifications - Edition 2016 IEC 0 1.0 3080 62952-1 Power sources for a wireless communication device Part 1: General requirements of power modules - Edition 1.0 2016 IEC 0 3081 62952-2 Power sources for a wireless communication device - Part 2: Profile for power modules with batteries - Edition 1.0 2016 IEC 0 3082 63000 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous 2016 IEC 0 substances - Edition 1.0 3083 63002 Identification and communication interoperability method for external power supplies used with portable computing 2016 IEC 0 devices - Edition 1.0 3084 62841-3-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-10: Particular 2016 IEC 0 CORR 1 requirements for transportable cut-off machines - Edition 1.0 3085 62841-3-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-4: Particular 2016 IEC 0 requirements for transportable bench grinders - Edition 1.0 3086 62841-3-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-4: Particular 2016 IEC 0 CORR 1 requirements for transportable bench grinders - Edition 1.0 3087 62855 Nuclear power plants - Electrical power systems - Electrical power systems analysis - Edition 1.0 2016 IEC 0 3088 62846 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic 2016 IEC 0 interaction between pantograph and overhead contact line - Edition 1.0 3089 62848-1 Railway applications DC surge arresters and voltage limiting devices Part 1: Metal-oxide surge arresters without gaps - 2016 IEC 0 Edition 1.0 3090 62849 Performance evaluation methods of mobile household robots - Edition 1.0 2016 IEC 0 3091 62827-3 Wireless power transfer - Management - Part 3: Multiple source control management - Edition 1.0 2016 IEC 0 3092 62840-2 Electric vehicle battery swap system - Part 2: Safety requirements - Edition 1.0 2016 IEC 0 3093 62841-2-8 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular 2016 IEC 0 requirements for hand-held shears and nibblers - Edition 1.0 3094 62777 Quality evaluation method for the sound field of directional loudspeaker array systems - Edition 1.0 2016 IEC 0 3095 62779-1 Semiconductor devices Semiconductor interface for human body communication Part 1: General requirements - Edition 2016 IEC 0 1.0 3096 62779-2 Semiconductor devices Semiconductor interface for human body communication Part 2: Characterization of interfacing 2016 IEC 0 performances - Edition 1.0 3097 62779-3 Semiconductor devices - Semiconductor interface for human body communication - Part 3: Functional type and its 2016 IEC 0 operational conditions - Edition 1.0 3098 62788-1-2 Measurement procedures for materials used in photovoltaic modules Part 1-2: Encapsulants Measurement of volume 2016 IEC 0 resistivity of photovoltaic encapsulants and other polymeric materials - Edition 1.0 3099 62788-1-4 Measurement procedures for materials used in photovoltaic modules Part 1-4: Encapsulants Measurement of optical 2016 IEC 0 transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength - Edition 1.0 3100 62788-1-5 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in 2016 IEC 0 linear dimensions of sheet encapsulation material resulting from applied thermal conditions - Edition 1.0 3101 62793 Protection against lightning Thunderstorm warning systems - Edition 1.0 2016 IEC 0 3102 62772 Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater 2016 IEC 0 than 1 500 V Definitions, test methods and acceptance criteria - Edition 1.0 3103 62822-1 Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 2016 IEC 0 GHz) - Part 1: Product family standard - Edition 1.0 3104 62822-2 Electric welding equipment Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 2016 IEC 0 GHz) Part 2: Arc welding equipment - Edition 1.0 3105 62820-1-1 Building intercom systems - Part 1-1: System requirements - General - Edition 1.0 2016 IEC 0 3106 62803 Transmitting equipment for radiocommunication Frequency response of optical-to-electric conversion device in high- 2016 IEC 0 frequency radio over fibre systems Measurement method - Edition 1.0 3107 62718 CORR 1 RAILWAY APPLICATIONS ROLLING STOCK DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING 2016 IEC 0 FLUORESCENT LAMPS - Edition 1.0 3108 62739-2 Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 2: Erosion test method for 2016 IEC 0 metal materials with surface processing - Edition 1.0 3109 62752 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) - Edition 1.0 2016 IEC 0 3110 62760 Audio reproduction method for normalized loudness level - Edition 1.0 2016 IEC 0 3111 62766-3 Consumer terminal function for access to IPTV and open internet multimedia services - Part 3: Content metadata 2016 IEC 0 3112 CISPR 25 Vehicles, boats and internal combustion engines Radio disturbance characteristics Limits and methods of measurement for 2016 IEC 0 the protection of on-board receivers - Edition 4.0 3113 CISPR 16-2-3 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of 2016 IEC 0 disturbances and immunity Radiated disturbance measurements - Edition 4.0 3114 CISPR 35 Electromagnetic compatibility of multimedia equipment - Immunity requirements - Edition 1.0 2016 IEC 0 3115 CISPR 32 Electromagnetic compatibility of multimedia equipment Emission requirements - Edition 2.0 2016 IEC 0 CORR 1 3116 CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: 2016 IEC 0 CORR 1 Emission - Edition 6.0 3117 CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: 2016 IEC 0 Emission - Edition 6.0 3118 CISPR 16-1-5 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and 2016 IEC 0 immunity measuring apparatus Antenna calibration sites and reference test sites for 5 MHz to 18 GHz - Edition 2.1; Consolidated Reprint 3119 CISPR 16-2-3 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of 2016 IEC 0 (REDLINE + S disturbances and immunity Radiated disturbance measurements - Edition 4.0 3120 63055 Format for LSI-Package-Board interoperable design - Edition 1.0 2016 IEC 0 3121 80369-5 Small-bore connectors for liquids and gases in healthcare applications Part 5: Connectors for limb cuff inflation 2016 IEC 0 applications - Edition 1.0 3122 80601-2-35 Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating 2016 IEC 0 devices using blankets, pads or mattresses and intended for heating in medical use - Edition 2.1; Consolidated Reprint 3123 80601-2-58 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens 2016 IEC 0 removal devices and vitrectomy devices for ophthalmic surgery - Edition 2.1; Consolidated Reprint 3124 CISPR 11 Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods of 2016 IEC 0 measurement - Edition 6.1 Consolidated Reprint 3125 82304-1 Health software - Part 1: General requirements for product safety - Edition 1.0 2016 IEC 0 3126 61869-6 Instrument transformers Part 6: Additional general requirements for low-power instrument transformers - Edition 1.0 2016 IEC 0 3127 61869-9 Instrument transformers - Part 9: Digital interface for instrument transformers - Edition 1.0 2016 IEC 0 3128 61882 Hazard and operability studies (HAZOP studies) Application guide - Edition 2.0 2016 IEC 0 (REDLINE + STANDARD 3129 61882 Hazard and operability studies (HAZOP studies) Application guide - Edition 2.0 2016 IEC 0 3130 61851-23 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM Part 23: DC electric vehicle charging station - Edition 1.0 2016 IEC 0 CORR 1 3131 61853-2 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and 2016 IEC 0 module operating temperature measurements - Edition 1.0 3132 61966-2-4 Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended- 2016 IEC 0 gamut YCC colour space for video applications - xvYCC - Edition 1.1; Consolidated Reprint 3133 61937-7 Digital audio Interface for non-linear PCM encoded audio bitstreams applying to IEC 60958 Part 7: Non-linear PCM 2016 IEC 0 bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats - Edition 2.1; Consolidated Reprint 3134 61788-4 Superconductivity Part 4: Residual resistance ratio measurement Residual resistance ratio of Nb-Ti and Nb3Sn composite 2016 IEC 0 superconductors - Edition 4.0 3135 61800-5-2 Adjustable speed electrical power drive systems Part 5-2: Safety requirements Functional - Edition 2.0 2016 IEC 0 (REDLINE + STAN 3136 61800-5-2 Adjustable speed electrical power drive systems Part 5-2: Safety requirements Functional - Edition 2.0 2016 IEC 0 3137 61800-5-1 Adjustable speed electrical power drive systems Part 5-1: Safety requirements Electrical, thermal and energy - Edition 2.1; 2016 IEC 0 Consolidated Reprint 3138 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters - 2016 IEC 0 Edition 1.2 Consolidated Reprint 3139 61995-1 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements - Edition 1.1; 2016 IEC 0 Consolidated Reprint 3140 61995-2 Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCL - Edition 1.1 2016 IEC 0 Consolidated Reprint 3141 61970-301 Energy management system application program interface (EMS-API) Part 301: Common information model (CIM) base - 2016 IEC 0 (REDLINE + Edition 6.0 STAN 3142 61970-301 Energy management system application program interface (EMS-API) Part 301: Common information model (CIM) base - 2016 IEC 0 Edition 6.0 3143 61987-11 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: Lists 2016 IEC 0 of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures - Edition 2.0 3144 61987-12 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 12: Lists 2016 IEC 0 of properties (LOPs) for flow measuring equipment for electronic data exchange - Edition 1.0 3145 61987-13 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 13: Lists 2016 IEC 0 of properties (LOP) for pressure measuring equipment for electronic data exchange - Edition 1.0 3146 61987-14 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 14: Lists 2016 IEC 0 of properties (LOP) for temperature measuring equipment for electronic data exchange - Edition 1.0 3147 61987-15 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 15: Lists 2016 IEC 0 of properties (LOPs) for level measuring equipment for electronic data exchange - Edition 1.0 3148 61987-16 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 16: Lists 2016 IEC 0 of properties (LOPs) for density measuring equipment for electronic data exchange - Edition 1.0 3149 61970-552 Energy management system application program interface (EMS-API) Part 552: CIMXML Model exchange format - 2016 IEC 0 Edition 2.0 3150 61975 High-voltage direct current (HVDC) installations System tests - Edition 1.0 Consolidated Reprint 2016 IEC 0 3151 62056-5-3 Electricity metering data exchange The DLMS/COSEM suite Part 5-3: DLMS/COSEM application layer - Edition 2.0 2016 IEC 0 (REDLINE + STAN 3152 62056-5-3 Electricity metering data exchange The DLMS/COSEM suite Part 5-3: DLMS/COSEM application layer - Edition 2.0 2016 IEC 0 3153 62054-11 Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers - 2016 IEC 0 Edition 1.1 Consolidated Reprint 3154 62056-6-2 Electricity metering data exchange The DLMS/COSEM suite Part 6-2: COSEM interface classes - Edition 2.0 2016 IEC 0 3155 62056-7-5 Electricity metering data exchange The DLMS/COSEM suite Part 7-5: Local data transmission profiles for Local 2016 IEC 0 Networks (LN) - Edition 1.0 3156 62108 Concentrator photovoltaic (CPV) modules and assemblies Design qualification and type approval - Edition 2.0 2016 IEC 0 (REDLINE + STANDARD 3157 62108 Concentrator photovoltaic (CPV) modules and assemblies Design qualification and type approval - Edition 2.0 2016 IEC 0 3158 62040-5-3 Uninterruptible power systems (UPS) Part 5-3: DC output UPS Performance and test requirements - Edition 1.0 2016 IEC 0 3159 62047-1 Semiconductor devices Micro-electromechanical devices Part 1: Terms and definitions - Edition 2.0 2016 IEC 0 3160 62035 Discharge lamps (excluding fluorescent lamps) Safety specifications - Edition 2.1; Consolidated Reprint 2016 IEC 0 3161 62040-2 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements - Edition 3.0 2016 IEC 0 (REDLINE + STANDA 3162 62040-2 Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements - Edition 3.0 2016 IEC 0 3163 62053-24 Electricity metering equipment (a.c.) Particular requirements Part 24: Static meters for reactive energy at fundamental 2016 IEC 0 frequency (classes 0,5 S, 1 S and 1) - Edition 1.1; Consolidated Reprint 3164 62053-23 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) - 2016 IEC 0 Edition 1.1 Consolidated Reprint 3165 62053-22 Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 2016 IEC 0 S) - Edition 1.1 Consolidated Reprint 3166 62053-21 Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) - 2016 IEC 0 Edition 1.1, Consolidated Reprint 3167 62053-11 Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy 2016 IEC 0 (classes 0,5, 1 and 2) - Edition 1.1 3168 62047-25 Semiconductor devices Micro-electromechanical devices Part 25: Silicon based MEMS fabrication technology 2016 IEC 0 Measurement method of pull-press and shearing strength of micro bonding area - Edition 1.0 3169 62047-26 Semiconductor devices Micro-electromechanical devices Part 26: Description and measurement methods for micro trench 2016 IEC 0 and needle structures - Edition1.0 3170 62052-21 Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 21: Tariff and load control 2016 IEC 0 equipment - Edition 1.1 Consolidated Reprint 3171 62052-11 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment - 2016 IEC 0 Edition 1.1; Consolidate Reprint 3172 61754-31 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 31: Type N-FO 2016 IEC 0 connector family - Edition 1.0 3173 61754-32 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink 2016 IEC 0 connector family - Edition 1.0 3174 61754-34 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM 2016 IEC 0 connector family 3175 61753-381-2 Fibre optic interconnecting devices and passive components Performance standard Part 381-2: Cyclic arrayed waveguide 2016 IEC 0 grating Category C (controlled environment) - Edition 1.0 3176 61753-381-6 Fibre optic interconnecting devices and passive components Performance standard Part 381-6: Cyclic arrayed waveguide 2016 IEC 0 grating Category O (uncontrolled environment) - Edition 1.0 3177 61784-3-8 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 - 2016 IEC 0 Edition 2.0 3178 61784-3-18 Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 2016 IEC 0 18 - Edition 1.1; Consolidated Reprint 3179 61784-3-17 Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 2016 IEC 0 17 - Edition 1.0 3180 61784-3-3 Industrial communication networks Profiles Part 3-3: Functional safety fieldbuses Additional specifications for CPF 3 - 2016 IEC 0 Edition 3.0 3181 61784-3-2 Industrial communication networks Profiles Part 3-2: Functional safety fieldbuses Additional specifications for CPF 2 - 2016 IEC 0 Edition 3.0 3182 61784-3-13 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 2016 IEC 0 13 - Edition 2.0 3183 61784-3 Industrial communication networks Profiles Part 3: Functional safety fieldbuses General rules and profile definitions IEC 2016 IEC 0 (REDLINE + - Edition 3.0 STANDA 3184 61784-3 Industrial communication networks Profiles Part 3: Functional safety fieldbuses General rules and profile definitions - 2016 IEC 0 Edition 3.0 3185 61757-1-1 Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings - Edition 1.0 2016 IEC 0 3186 61757-2-2 Fibre optic sensors Part 2-2: Temperature measurement Distributed sensing - Edition 1.0 2016 IEC 0 3187 61755-3-10 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector 2016 IEC 0 parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors - Edition 3188 61671-2 Standard for automatic test markup language (ATML) instrument description - Edition 1.0 2016 IEC 0 3189 61671-4 Standard for automatic test markup language (ATML) test configuration - Edition 1.0 2016 IEC 0 3190 61671-5 Standard for automatic test markup language (ATML) test adapter description - Edition 1.0 2016 IEC 0 3191 61671-6 Standard for automatic test markup language (ATML) test station description - Edition 1.0 2016 IEC 0 3192 61643-351 Components for low-voltage surge protective devices Part 351: Performance requirements and test methods for 2016 IEC 0 telecommunications and signalling network surge isolation transformers (SIT) - Edition 1.0 3193 61605 Fixed inductors for use in electronic and telecommunication equipment Marking codes - Edition 3.0 2016 IEC 0 3194 61636 Software Interface for Maintenance Information Collection and Analysis (SIMICA) - Edition 1.0 2016 IEC 0 3195 61636-1 Software interface for maintenance information collection and analysis (SIMICA): Exchanging test results and session 2016 IEC 0 information via the extensible markup language (XML) - Edition 1.0 3196 61636-99 Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements - 2016 IEC 0 Edition 1.0 3197 61747-30-4 Liquid crystal display devices - Part 30-4: Measuring methods for liquid crystal display modules - Dynamic backlight units 2016 IEC 0 - Edition 1.0 3198 61753-052-3 Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non- 2016 IEC 0 connectorized fixed attenuator - Category U in uncontrolled environment - Edition 2.0 3199 61753-052-6 Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non- 2016 IEC 0 connectorized fixed attenuator - Category O in outside plant environment - Edition 1.0 3200 61730-1 Photovoltaic (PV) module safety qualification Part 1: Requirements for construction - Edition 2.0 2016 IEC 0 3201 61703 Mathematical Expressions for Reliability, Availability, Maintainability and Maintenance Support Terms - Edition 2.0 2016 IEC 0 3202 61747-20-3 Liquid crystal display devices Part 20-3: Visual inspection Active matrix colour liquid crystal display modules - Edition 2016 IEC 0 1.0 3203 61730-2 Photovoltaic (PV) module safety qualification Part 2: Requirements for testing - Edition 2.0 2016 IEC 0 (REDLINE + STANDA 3204 61730-2 Photovoltaic (PV) module safety qualification Part 2: Requirements for testing - Edition 2.0 2016 IEC 0 3205 61511-3 Functional safety Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the 2016 IEC 0 (REDLINE + required safety integrity levels - Edition 2.0 STANDA 3206 61511-3 Functional safety Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the 2016 IEC 0 required safety integrity levels - Edition 2.0 3207 61515 Mineral Insulated Thermocouple Cables and Thermocouples - Edition 2.0 2016 IEC 0 3208 61511-1 CORR FUNCTIONAL SAFETY SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR Part 1: 2016 IEC 0 1 Framework, definitions, system, hardware and application programming requirements - Edition 2.0 3209 61511-1 Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, 2016 IEC 0 hardware and application programming requirements - Edition 2.0 3210 61511-2 Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 2016 IEC 0 (REDLINE + 61511-1:2016 - Edition 2.0 STANDA 3211 61511-2 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of 2016 IEC 0 IEC 61511-1: 2016 - Edition 2.0 3212 61557-8 CORR Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2016 IEC 0 1 or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems - Edition 3.0 3213 61557-9 CORR ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1 000 V A.C. AND 1 500 V D.C. - 2016 IEC 0 1 EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - Part 9: Equipment for insulation fault location in IT systems - Edition 3.0 3214 61587-1 Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 series Part 1: Environmental 2016 IEC 0 requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation - Edition 3215 61340-4-9 Electrostatics Part 4-9: Standard test methods for specific applications Garments - Edition 2.0 2016 IEC 0 3216 61340-5-1 Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena General requirements - Edition 2.0 2016 IEC 0 (REDLINE + STAN 3217 61340-5-1 Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena General requirements - Edition 2.0 2016 IEC 0 3218 61340-2-3 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid 2016 IEC 0 (REDLINE + electrostatic charge accumulation - Edition 2.0 STAN 3219 61340-2-3 Electrostatics - Part 2-3: Methods of Test for Determining the Resistaance and Resistivity of Solid Planar Materials Used to 2016 IEC 0 Avoid Electrostatic Charge Accumulation - Edition 2.0 3220 61375-2-3 Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile - Edition 1.0 2016 IEC 0 CORR 2 3221 61360-6 Standard data element types with associated classification scheme for electric components Part 6: IEC Common Data 2016 IEC 0 Dictionary (IEC CDD) quality guidelines - Edition 1.0 3222 61377 Railway applications Rolling stock Combined test method for traction systems - Edition 2.0 2016 IEC 0 3223 61347-2-13 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules - 2016 IEC 0 Edition 2.1; Consolidated Reprint 3224 61347-2-3 Lamp control gear Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent 2016 IEC 0 lamps - Edition 2.1; Consolidated Reprint 3225 61466-1 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength 2016 IEC 0 classes and end fittings - Edition 2.0 3226 61400-1 CORR Wind turbines Part 1: Design requirements - Edition 3.1 Consolidated Reprint 2016 IEC 0 1 3227 61400-25-6 Wind energy generation systems Part 25-6: Communications for monitoring and control of wind power plants Logical 2016 IEC 0 node classes and data classes for condition monitoring - Edition 2.0 3228 61400-25-4 Wind energy generation systems - Part 25-4: Communications for monitoring and control of wind power plants - Mapping 2016 IEC 0 (REDLINE + to communication profile - Edition 2.0 STA 3229 61400-25-4 Wind energy generation systems - Part 25-4: Communications for monitoring and control of wind power plants - Mapping 2016 IEC 0 to communication profile - Edition 2.0; 3230 61400-13 Wind turbines Part 13: Measurement of mechanical loads - Edition 1.0 2015 IEC 0 3231 61400-25-3 Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange 2015 IEC 0 (REDLINE + models - Edition 2.0 STA 3232 61400-25-3 Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange 2015 IEC 0 models - Edition 2.0 3233 61400-25-2 Wind turbines Part 25-2: Communications for monitoring and control of wind power plants Information models - Edition 2015 IEC 0 2.0 3234 61378-3 Converter transformers Part 3: Application guide - Edition 2.0 2015 IEC 0 3235 61472 CORR 1 LIVE WORKING MINIMUM APPROACH DISTANCES FOR A.C. SYSTEMS IN THE VOLTAGE RANGE 72,5 kV 2015 IEC 0 TO 800 kV A METHOD OF CALCULATION - Edition 3.0 3236 61439-5 CORR Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks - Edition 2015 IEC 0 1 2.0 3237 61400-27-1 Wind turbines Part 27-1: Electrical simulation models Wind turbines - Edition 1.0 2015 IEC 0 3238 61427-2 Secondary cells and batteries for renewable energy storage General requirements and methods of test Part 2: On-grid 2015 IEC 0 applications - Edition 1.0 3239 61375-2-3 Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile - Edition 1.0 2015 IEC 0 3240 61340-4-1 Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed 2015 IEC 0 floors - Edition 2.1; Consolidated Reprint 3241 61338-1-5 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of 2015 IEC 0 conductivity at interface between conductor layer and dielectric substrate at microwave frequency - Edition 1.0 3242 61340-2-1 Electrostatics Part 2-1: Measurement methods Ability of materials and products to dissipate static electric charge - Edition 2015 IEC 0 2.0 3243 61340-4-6 Electrostatics Part 4-6: Standard test methods for specific applications Wrist straps - Edition 2.0 2015 IEC 0 3244 61340-5-3 Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements 2015 IEC 0 classification for packaging intended for electrostatic discharge sensitive devices - Edition 2.0 3245 61347-1 Lamp controlgear - Part 1: General and safety requirements - Edition 3.0 2015 IEC 0 (REDLINE + STANDA 3246 61347-1 Lamp controlgear - Part 1: General and safety requirements - Edition 3.0 2015 IEC 0 3247 61481-1 CORR Live working Phase comparators Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. - Edition 1.0 2015 IEC 0 1 3248 61496-1 CORR Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests - Edition 3.0 2015 IEC 0 1 3249 61523-4 Design and Verification of Low-Power Integrated Circuits - Edition 1.0 2015 IEC 0 3250 61747-2 Liquid crystal display devices Part 2: Liquid crystal display modules Sectional specification - Edition 2.0 2015 IEC 0 3251 61747-20-1 Liquid crystal display devices - Part 20-1: Visual inspection - Monochrome liquid crystal display cells (excluding all active 2015 IEC 0 matrix liquid crystal display cells) - Edition 1.0 3252 61747-20-2 Liquid crystal display devices - Part 20-2: Visual inspection - Monochrome matrix liquid crystal display modules 2015 IEC 0 (excluding all active matrix liquid crystal display modules) - Edition 1.0 3253 61726 Cable Assemblies, Cables, Connectors and Passive Microwave Components - Screening Attenuation Measurement by the 2015 IEC 0 Reverberation Chamber Method - Edition 3.0 3254 61747-3-1 Liquid crystal display devices Part 3-1: Liquid crystal display (LCD) cells Blank detail specification - Edition 3.0 2015 IEC 0 3255 61747-40-2 Liquid crystal display devices Part 40-2: Mechanical testing of display cover glass for mobile devices Uniaxial flexural 2015 IEC 0 strength (4-point bend) - Edition 1.0 3256 61747-40-3 Liquid crystal display devices Part 40-3: Mechanical testing of display cover glass for mobile devices Biaxial flexural 2015 IEC 0 energy to failure (ball drop) - Edition 1.0 3257 61747-40-4 Liquid crystal display devices Part 40-4: Mechanical testing of display cover glass for mobile devices Biaxial flexural 2015 IEC 0 strength (ring-on-ring) - Edition 1.0 3258 61643-22 Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling 2015 IEC 0 networks - Selection and application principles - Edition 2.0 3259 61675-2 Radionuclide imaging devices Characteristics and test conditions Part 2: Gamma cameras for planar, wholebody, and 2015 IEC 0 SPECT imaging - Edition 2.0 3260 61669 Electroacoustics Measurement of real-ear acoustical performance characteristics of hearing aids - Edition 2.0 2015 IEC 0 3261 61754-6-100 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 6-100: Type MU 2015 IEC 0 connector family Simplified receptacle MU-PC connector interfaces - Edition 1.0 3262 61755-2-4 Fibre optic interconnecting devices and passive components Connector optical interfaces Part 2-4: Connection parameters 2015 IEC 0 of non-dispersion shifted single-mode physically contacting fibres Non-angled for reference connection applications - Edition 1.0 3263 61755-2-5 Fibre optic interconnecting devices and passive components Connector optical interfaces Part 2-5: Connection parameters 2015 IEC 0 of non-dispersion shifted single-mode physically contacting fibres Angled for reference connection applications - Edition 1.0 3264 61755-3-31 Fibre optic interconnecting devices and passive components Connector optical interfaces Part 3-31: Connector parameters 2015 IEC 0 of non-dispersion shifted single mode physically contacting fibres Angled polyphenylene sulphide rectangular ferrules - Edition 1.0 3265 61755-3-32 Fibre optic interconnecting devices and passive components Connector optical interfaces - Part 3-32: Connector 2015 IEC 0 parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules - Edition 1.0 3266 61760-4 Surface mounting technology Part 4: Classification, packaging, labelling and handling of moisture sensitive devices - 2015 IEC 0 Edition 1.0 3267 61770 Electric appliances connected to the water mains Avoidance of backsiphonage and failure of hose-sets - Edition 2.1 2015 IEC 0 Consolidated Reprint 3268 61784-5-10 Industrial communication networks Profiles Part 5-10: Installation of fieldbuses Installation profiles for CPF 10 - Edition 2015 IEC 0 2.1 Consolidated Reprint 3269 61754-4-100 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 4-100: Type SC 2015 IEC 0 connector family Simplified receptacle SC-PC connector interfaces - Edition 1.0 3270 61753-382-2 Fibre optic interconnecting devices and passive components Performance standard Part 382-2: Non-connectorized single- 2015 IEC 0 mode bidirectional G-PON-NGA WWDM devices for category C Controlled environment - Edition 1.0 3271 62047-15 Semiconductor devices - Micro-electromechanical devices - Part 15: Test method of bonding strength between PDMS and 2015 IEC 0 glass - Edition 1.0 3272 62047-16 Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of 2015 IEC 0 MEMS films - Wafer curvature and cantilever beam deflection methods - Edition 1.0 3273 62047-17 Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical 2015 IEC 0 properties of thin films - Edition 1.0 3274 62077 Fibre optic interconnecting devices and passive components Fibre optic circulators Generic specification - Edition 3.0 2015 IEC 0 3275 62080 Sound signalling devices for household and similar purposes - Edition 1.2; Consolidated Reprint 2015 IEC 0 3276 62087-1 Audio, video, and related equipment Determination of power consumption Part 1: General - Edition 1.0 2015 IEC 0 3277 62087-3 Audio, video, and related equipment Determination of power consumption Part 3: Television sets - Edition 1.0 2015 IEC 0 3278 62087-4 Audio, video and related equipment Determination of power consumption Part 4: Video recording equipment - Edition 1.0 2015 IEC 0 3279 62087-5 Audio, video and related equipment Determination of power consumption Part 5: Set top boxes (STB) - Edition 1.0 2015 IEC 0 3280 62087-6 Audio, video and related equipment Determination of power consumption Part 6: Audio equipment - Edition 1.0 2015 IEC 0 3281 62104 Characteristics of DAB Receivers - Edition 3.0 2015 IEC 0 3282 62106 Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 2015 IEC 0 108,0 MHz - Edition 3.0 3283 62061 CORR 1 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems 2015 IEC 0 - Edition 1.2 3284 62061 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems 2015 IEC 0 - Edition 1.2; Consolidated Reprint 3285 62052-31 Electricity metering equipment (AC) General requirements, tests and test conditions Part 31: Product safety requirements 2015 IEC 0 and tests - Edition 1.0 3286 62056-6-1 Electricity metering data exchange The DLMS/COSEM suite Part 6-1: Object Identification System (OBIS) - Edition 2.0 2015 IEC 0 3287 62056-4-7 Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks - 2015 IEC 0 Edition 1.0 3288 61980-1 Electric vehicle wireless power transfer (WPT) systems Part 1: General requirements - Edition 1.0 2015 IEC 0 3289 61982-4 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel- 2015 IEC 0 metal hydride cells and modules - Edition 1.0 3290 61977 Fibre optic interconnecting devices and passive components Fibre optic filters Generic specification - Edition 3.0 2015 IEC 0 3291 61970-456 Energy management system application program interface (EMS-API) Part 456: Solved power system state profiles - 2015 IEC 0 Edition 1.1; Consolidated Reprint 3292 61988-2-6 Plasma display panels - Part 2-6: Measuring methods - APL dependent gamma and colour characteristics - Edition 1.0 2015 IEC 0 3293 61987-21 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 21: List of 2015 IEC 0 Properties (LOP) of automated valves for electronic data exchange Generic structures - Edition 1.0 3294 61987-22 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 22: Lists 2015 IEC 0 of Properties (LOPs) of valve body assemblies for electronic data exchange - Edition 1.0 3295 61987-23 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists 2015 IEC 0 of Properties (LOPs) of actuators for electronic data exchange - Edition 1.0 3296 61987-24-1 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 24-1: Lists 2015 IEC 0 of Properties (LOPs) of positioners and I/P converters for electronic data exchange - Edition 1.0 3297 61970-452 Energy management system application program interface (EMS-API) Part 452: CIM model exchange specification - 2015 IEC 0 Edition 2.0 3298 61968-6 Application integration at electric utilities System interfaces for distribution management Part 6: Interfaces for 2015 IEC 0 maintenance and construction - Edition 1.0 3299 61968-8 Application integration at electric utilities System interfaces for distribution management Part 8: Interfaces for customer 2015 IEC 0 operations - Edition 1.0 3300 62014-4 IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows - Edition 1.0 2015 IEC 0 3301 62014-5 Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs - Edition 1.0 2015 IEC 0 3302 62007-1 Semiconductor optoelectronic devices for fibre optic system applications Part 1: Specification template for essential ratings 2015 IEC 0 and characteristics - Edition 3.0 3303 62005-9-1 Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical 2015 IEC 0 components - Edition 1.0 3304 61992-4 Railway applications Fixed installations DC switchgear Part 4: Outdoor d.c. disconnectors, switch-disconnectors and 2015 IEC 0 earthing switches - Edition 1.1; Consolidated Reprint 3305 61992-3 Railway applications Fixed installations DC switchgear Part 3: Indoor d.c. disconnectors, switch-disconnectors and 2015 IEC 0 earthing switches - Edition 2.1; Consolidated Reprint 3306 61988-4-1 Plasma display panels - Part 4-1: Environmental testing methods - Climatic and mechanical - Edition 1.0 2015 IEC 0 3307 61837-4 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead 2015 IEC 0 connections - Part 4: Hybrid enclosure outlines - Edition 2.0 3308 61837-3 Surface mounted piezoelectric devices for frequency control and selection Standard outlines and terminal lead connections 2015 IEC 0 - Part 3: Metal enclosures - Edition 2.0 3309 61850-7-410 Communication networks and systems for power utility automation Part 7-410: Basic communication structure 2015 IEC 0 Hydroelectric power plants Communication for monitoring and control - Edition 2.1; Consolidated Reprint 3310 61811-1 Electromechanical telecom elementary relays of assessed quality Part 1: Generic specification and blank detail 2015 IEC 0 specification - Edition 2.0 3311 61810-3 Electromechanical elementary relays Part 3: Relays with forcibly guided (mechanically linked) contacts - Edition 1.0 2015 IEC 0 3312 61810-1 Electromechanical elementary relays Part 1: General and safety requirements - Edition 4.0 2015 IEC 0 3313 61829 Photovoltaic (PV) array On-site measurement of current-voltage characteristics - Edition 2.0 2015 IEC 0 3314 61800-7-304 Adjustable speed electrical power drive systems Part 7-304: Generic interface and use of profiles for power drive systems 2015 IEC 0 Mapping of profile type 4 to network technologies - Edition 2.0 3315 61804-3 Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and 2015 IEC 0 semantics - Edition 3.0 3316 61804-4 Function blocks (FB) for process control and electronic device description language (EDDL) Part 4: EDD interpretation - 2015 IEC 0 Edition 1.0 3317 61804-5 Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library 2015 IEC 0 - Edition 1.0 3318 61800-2 Adjustable speed electrical power drive systems Part 2: General requirements Rating specifications for low voltage 2015 IEC 0 adjustable speed a.c. power drive systems - Edition 2.0 3319 61800-7-303 Adjustable speed electrical power drive systems Part 7-303: Generic interface and use of profiles for power drive systems 2015 IEC 0 Mapping of profile type 3 to network technologies - Edition 2.0 3320 61800-7-302 Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems 2015 IEC 0 - Mapping of profile type 2 to network technologies - Edition 2.0 3321 61800-7-301 Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems 2015 IEC 0 (REDLINE + - Mapping of profile type 1 to network technologies - Edition 2.0 ST 3322 61800-7-301 Adjustable speed electrical power drive systems Part 7-301: Generic interface and use of profiles for power drive systems 2015 IEC 0 Mapping of profile type 1 to network technologies - Edition 2.0 3323 61800-7-204 Adjustable speed electrical power drive systems Part 7-204: Generic interface and use of profiles for power drive systems 2015 IEC 0 Profile type 4 specification - Edition 2.0 3324 61800-7-203 Adjustable speed electrical power drive systems Part 7-203: Generic interface and use of profiles for power drive systems 2015 IEC 0 Profile type 3 specification - Edition 2.0 3325 61800-7-202 Adjustable speed electrical power drive systems Part 7-202: Generic interface and use of profiles for power drive systems 2015 IEC 0 Profile type 2 specification - Edition 2.0 3326 61800-7-201 Adjustable speed electrical power drive systems Part 7-201: Generic interface and use of profiles for power drive systems 2015 IEC 0 (REDLINE + Profile type 1 specification - Edition 2.0 ST 3327 61800-7-201 Adjustable speed electrical power drive systems Part 7-201: Generic interface and use of profiles for power drive systems 2015 IEC 0 Profile type 1 specification - Edition 2.0 3328 61800-7-1 Adjustable speed electrical power drive systems Part 7-1: Generic interface and use of profiles for power drive systems 2015 IEC 0 Interface definition - Edition 2.0 3329 61784-5-15 Industrial communication networks Profiles Part 5-15: Installation of fieldbuses Installation profiles for CPF 15 - Edition 2015 IEC 0 1.1; Consolidated Reprint 3330 61784-5-12 Industrial communication networks Profiles Part 5-12: Installation of fieldbuses Installation profiles for CPF 12 - Edition 2015 IEC 0 1.1 Consolidated Reprint 3331 61784-5-4 NULL 2015 IEC 0 (REDLINE + STAN 3332 61788-21 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General 2015 IEC 0 characteristics and guidance - Edition 1.0 3333 61935-1 Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as 2015 IEC 0 specified in ISO/IEC 11801 and related standards - Edition 4.0 3334 61935-1 Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as 2015 IEC 0 specified in ISO/IEC 11801 and related standards - Edition 4.0 3335 61935-2-23 Generic cabling systems Specification for the testing of balanced communication cabling in accordance with ISO/IEC 2015 IEC 0 11801 Part 2-23: Cord and work area cord category 7 Blank detail specification - Edition 1.0 3336 61935-2-24 Generic cabling systems Specification for the testing of balanced communication cabling in accordance with ISO/IEC 2015 IEC 0 11801 Part 2-24: Cord and work area cord category 7A Blank detail specification - Edition 1.0 3337 61935-2-25 Generic cabling systems Specification for the testing of balanced communication cabling in accordance with ISO/IEC 2015 IEC 0 11801 Part 2-25: Work area with M12 4 poles connectors Blank detail specification - Edition 1.0 3338 61892-1 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions - Edition 3.0 2015 IEC 0 (REDLINE + STANDA 3339 61892-1 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions - Edition 3.0 2015 IEC 0 3340 61869-5 CORR INSTRUMENT TRANSFORMERS Part 5: Additional requirements for capacitor voltage transformers - Edition 1.0 2015 IEC 0 1 3341 61914 Cable cleats for electrical installations - Edition 2.0 2015 IEC 0 (REDLINE + STANDARD 3342 61914 Cable cleats for electrical installations - Edition 2.0 2015 IEC 0 3343 CISPR 11 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of 2015 IEC 0 (REDLINE + measurement - Edition 6.0 STAND 3344 CISPR 11 Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods of 2015 IEC 0 measurement - Edition 6.1 Consolidated Reprint 3345 80601-2-71 Medical electrical equipment - Part 2-71: Particular requirements for the basic safety and essential performance of 2015 IEC 0 functional near-infrared spectroscopy (NIRS) equipment - Edition 1.0 3346 80601-2-35 NULL 2015 IEC 0 CORR 2 3347 63003 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements 2015 IEC 0 utilizing IEEE Std 1505 - Edition 1.0 3348 63004 Standard for receiver fixture interface - Edition 1.0 2015 IEC 0 3349 CISPR 16-1-1 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and 2015 IEC 0 (REDLINE + S immunity measuring apparatus Measuring apparatus - Edition 4.0 3350 CISPR 16-1-1 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and 2015 IEC 0 immunity measuring apparatus Measuring apparatus - Edition 4.0 3351 CISPR 15 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment - 2015 IEC 0 Edition 8.1 Consolidated Reprint 3352 CISPR 14-2 Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 2: 2015 IEC 0 (REDLINE + Immunity Product family standard - Edition 2.0 STA 3353 CISPR 14-2 Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 2: 2015 IEC 0 Immunity Product family standard - Edition 2.0 3354 CISPR 13 Sound and television broadcast receivers and associated equipment Radio disturbance characteristics Limits and methods 2015 IEC 0 of measurement - Edition 5.1; Consolidated Reprint 3355 IECEX 01 NULL 2015 IEC 0 3356 CISPR-TR 16-3 NULL 2015 IEC 0 3357 CISPR 32 Electromagnetic compatibility of multimedia equipment Emission requirements - Edition 2.0 2015 IEC 0 3358 CISPR 24 Information technology equipment Immunity characteristics Limits and methods of measurement - Edition 2.1; 2015 IEC 0 Consolidated Reprint 3359 CISPR 32 Electromagnetic compatibility of multimedia equipment Emission requirements - Edition 2.0 2015 IEC 0 (REDLINE + STAND 3360 62765-1 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and 2015 IEC 0 transmitters - Part 1: Pressure transmitters - Edition 1.0 3361 62740 Root cause analysis (RCA) - Edition 1.0 2015 IEC 0 3362 62741 Demonstration of dependability requirements - The dependability case - Edition 1.0 2015 IEC 0 3363 62756-1 Digital load side transmission lighting control (DLT) - Part 1: Basic requirements - Edition 1.0 2015 IEC 0 3364 62759-1 Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units - Edition 2015 IEC 0 1.0 3365 62733 Programmable components in electronic lamp controlgear General and safety requirements - Edition 1.0 2015 IEC 0 3366 62714-2 Engineering data exchange format for use in industrial automation systems engineering Automation markup language Part 2015 IEC 0 2: Role class libraries - Edition 1.0 3367 62708 Document kinds for electrical and instrumentation projects in the process industry - Edition 1.0 2015 IEC 0 3368 62717 LED modules for general lighting Performance requirements - Edition 1.1; Consolidated Reprint 2015 IEC 0 3369 62821-1 Electric cables Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 2015 IEC 0 450/750 V Part 1: General requirements - Edition 1.0 3370 62821-2 Electric cables Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 2015 IEC 0 450/750 V Part 2: Test methods - Edition 1.0 3371 62821-3 Electric cables Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 2015 IEC 0 450/750 V Part 3: Flexible cables (cords) - Edition 1.0 3372 62792 Measurement method for the output of electroshock weapons - Edition 1.0 2015 IEC 0 3373 62808 Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation 2015 IEC 0 devices - Edition 1.0 3374 62810 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods - Edition 1.0 2015 IEC 0 3375 62811 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) Performance 2015 IEC 0 requirements for low frequency square wave operation - Edition 1.0 3376 62813 Lithium ion capacitors for use in electric and electronic equipment Test methods for electrical characteristics - Edition 1.0 2015 IEC 0 3377 62769-1 Field device integration (FDI) Part 1: Overview - Edition 1.0 2015 IEC 0 3378 62769-101-1 Field Device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 - Edition 1.0 2015 IEC 0 3379 62769-101-2 Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE - Edition 1.0 2015 IEC 0 3380 62769-103-1 Field device integration (FDI) Part 103-1: Profiles PROFIBUS - Edition 1.0 2015 IEC 0 3381 62769-103-4 Field device integration (FDI) Part 103-4: Profiles PROFINET - Edition 1.0 2015 IEC 0 Edition 1.0 2015 IEC 0 - _آand WirelessHART _آField Device Integration (FDI) - Part 109-1: Profiles - HART 62769-109-1 3382 3383 62769-2 Field Device Integration (FDI) Part 2: FDI Client - Edition 1.0 2015 IEC 0 3384 62769-3 Field Device Integration (FDI) - Part 3: FDI Server - Edition 1.0 2015 IEC 0 3385 62769-4 Field Device Integration (FDI) Part 4: FDI Packages - Edition 1.0 2015 IEC 0 3386 62769-5 Field Device Integration (FDI) - Part 5: FDI Information Model - Edition 1.0 2015 IEC 0 3387 62769-6 Field Device Integration (FDI) Part 6: FDI Technology Mapping - Edition 1.0 2015 IEC 0 3388 62769-7 Field Device Integration (FDI) Part 7: FDI Communication Devices - Edition 1.0 2015 IEC 0 3389 62776 CORR 1 Double-capped LED lamps designed to retrofit linear fluorescent lamps Safety specifications - Edition 1.0 2015 IEC 0 3390 62841-2-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-4: Particular 2015 IEC 0 CORR 1 requirements for hand-held sanders and polishers other than disc type - Edition 1.0 3391 62841-2-2 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN 2015 IEC 0 CORR 1 MACHINERY SAFETY Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches - Edition 1.0 3392 62838 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. 2015 IEC 0 Safety specifications - Edition 1.0 3393 62841-1 CORR ELECTRIC MOTOR-OPERATED HANDHELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN 2015 IEC 0 2 MACHINERY SAFETY Part 1: General requirements - Edition 1.0 3394 62841-2-11 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-11: Particular 2015 IEC 0 requirements for hand-held reciprocating saws - Edition 1.0 3395 62841-2-14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-14: Particular 2015 IEC 0 requirements for hand-held planers - Edition 1.0 3396 62753 Digital terrestrial television receivers for the DTMB system - Edition 1.0 2015 IEC 0 3397 62823 Thyristor valves for thyristor controlled series capacitors (TCSC) Electrical testing - Edition 1.0 2015 IEC 0 3398 62841-3-6 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN 2015 IEC 0 CORR 1 MACHINERY SAFETY Part 3-6: Particular requirements for transportable diamond drills with liquid system - Edition 1.0 3399 62841-2-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-9: Particular 2015 IEC 0 requirements for hand-held tappers and threaders - Edition 1.0 3400 62841-2-9 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN 2015 IEC 0 CORR 1 MACHINERY SAFETY Part 2-9: Particular requirements for hand-held tappers and threaders - Edition 1.0 3401 62841-3-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-10: Particular 2015 IEC 0 requirements for transportable cut-off machines - Edition 1.0 3402 62912 Railway applications Direct current signalling monostable relays of type N and type C - Edition 1.0 2015 IEC 0 3403 62906-1-2 Laser display devices - Part 1-2: Vocabulary and letter symbols - Edition 1.0 2015 IEC 0 3404 62870 Electrical installations for lighting and beaconing of aerodromes Safety secondary circuits in series circuits General safety 2015 IEC 0 requirements - Edition 1.0 3405 62841-3-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-9: Particular 2015 IEC 0 CORR 1 requirements for transportable mitre saws - Edition 1.0 3406 62842 Multimedia home server systems File allocation system with minimized reallocation - Edition 1.0 2015 IEC 0 3407 62858 Lightning density based on lightning location systems (LLS) General principles - Edition 1.0 2015 IEC 0 3408 62889 Digital video interface - Gigabit video interface for multimedia systems - Edition 1.0 2015 IEC 0 3409 62878-1-1 Device embedded substrate - Part 1-1: Generic specification - Test methods - Edition 1.0 2015 IEC 0 3410 62875 Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texture 2015 IEC 0 map for auditory presentation of printed texts - Edition 1.0 3411 62485-4 Safety requirements for secondary batteries and battery installations Part 4: Valve-regulated lead-acid batteries for use in 2015 IEC 0 portable appliances - Edition 1.0 3412 62485-1 Safety requirements for secondary batteries and battery installations - Part 1: General safety information - Edition 1.0 2015 IEC 0 3413 62493 Assessment of lighting equipment related to human exposure to electromagnetic field - Edition 2.0 2015 IEC 0 3414 62575-1 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Part 1: Generic specification - Edition 1.0 2015 IEC 0 3415 62568 Overhead lines Method for fatigue testing of conductors - Edition 1.0 2015 IEC 0 3416 62559-2 Use case methodology - Part 2: Definition of the templates for use cases, actor list and requirements list - Edition 1.0 2015 IEC 0 3417 62552-1 Household refrigerating appliances Characteristics and test methods Part 1: General requirements - Edition 1.0 2015 IEC 0 3418 62552-2 Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements - Edition 1.0 2015 IEC 0 3419 62552-3 Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume - Edition 2015 IEC 0 1.0 3420 62560 CORR 2 Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications - Edition 1.1 2015 IEC 0 3421 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications - Edition 1.1; 2015 IEC 0 Consolidated Reprint 3422 62560 AMD 1 AMENDMENT 1 Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications - 2015 IEC 0 Edition 1.0 3423 62560 AMD 1 Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications - Edition 1.1 2015 IEC 0 CORR 1 3424 62541-10 OPC Unified Architecture - Part 10: Programs - Edition 2.0 2015 IEC 0 3425 62541-100 OPC unified architecture - Part 100: Device Interface - Edition 1.0 2015 IEC 0 3426 62541-11 OPC unified architecture - Part 11: Historical Access - Edition 1.0 2015 IEC 0 3427 62541-13 OPC unified architecture Part 13: Aggregates - Edition 1.0 2015 IEC 0 3428 62541-3 OPC unified architecture Part 3: Address Space Model - Edition 2.0 2015 IEC 0 3429 62541-9 OPC unified architecture Part 9: Alarms and conditions - Edition 2.0 2015 IEC 0 3430 62541-8 OPC Unified Architecture - Part 8: Data Access - Edition 2.0 2015 IEC 0 3431 62549 INT 1 Articulated systems and flexible systems for cable guiding - Edition 1.0 2015 IEC 0 3432 62541-7 OPC unified architecture - Part 7: Profiles - Edition 2.0 2015 IEC 0 3433 62541-6 OPC unified architecture Part 6: Mappings - Edition 2.0 2015 IEC 0 3434 62541-5 OPC unified architecture Part 5: Information Model - Edition 2.0 2015 IEC 0 3435 62541-4 OPC unified architecture Part 4: Services - Edition 2.0 2015 IEC 0 3436 62645 CORR 1 Nuclear power plants Instrumentation and control systems Requirements for security programmes for computer-based 2015 IEC 0 systems - Edition 1.0 3437 62648 Graphical symbols for use on equipment Guidelines for the inclusion of graphical symbols in IEC publications - Edition 2015 IEC 0 1.1; Consolidated Reprint 3438 62648 Graphical symbols for use on equipment Guidelines for the inclusion of graphical symbols in IEC publications - Edition 2015 IEC 0 1.1; Consolidated Reprint 3439 62642-2-71 Alarm systems Intrusion and hold-up systems Part 2-71: Intrusion detectors Glass break detectors (acoustic) - Edition 1.0 2015 IEC 0 3440 62642-2-72 Alarm systems Intrusion and hold-up systems Part 2-72: Intrusion detectors Glass break detectors (passive) - Edition 1.0 2015 IEC 0 3441 62642-2-73 Alarm systems Intrusion and hold-up systems Part 2-73: Intrusion detectors Glass break detectors (active) - Edition 1.0 2015 IEC 0 3442 62670-2 Photovoltaic concentrators (CPV) Performance testing Part 2: Energy measurement - Edition 1.0 2015 IEC 0 3443 62665 Multimedia systems and equipment Multimedia e-publishing and e-book technologies Texture map for auditory 2015 IEC 0 presentation of printed texts - Edition 2.0 3444 62665 Multimedia systems and equipment Multimedia e-publishing and e-book technologies Texture map for auditory 2015 IEC 0 presentation of printed texts - Edition 2.0 3445 62656-3 Standardized product ontology register and transfer by spreadsheets Part 3: Interface for Common Information Model - 2015 IEC 0 Edition 1.0 3446 62659 Nanomanufacturing - Large scale manufacturing for nanoelectronics - Edition 1.0 2015 IEC 0 3447 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V Performance requirements - Edition 2015 IEC 0 1.1; Consolidated Reprint 3448 62683 Low-voltage switchgear and controlgear Product data and properties for information exchange - Edition 2.0 2015 IEC 0 3449 62680-2-1 Universal serial bus interfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 - Edition 1.0 2015 IEC 0 3450 62680-2-2 Universal serial bus interfaces for data and power - Part 2-2: Micro-USB Cables and Connectors Specification, Revision 2015 IEC 0 1.01 - Edition 1.0 3451 62680-2-3 Universal serial bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document 2015 IEC 0 Revision 2.0 - Edition 1.0 3452 62680-1-1 Universal serial bus interfaces for data and power Part 1-1: Common components USB Battery Charging Specification, 2015 IEC 0 Revision 1.2 - Edition 1.0 3453 62601 Industrial networks Wireless communication network and communication profiles WIA-PA - Edition 2.0 2015 IEC 0 3454 62601 Industrial networks Wireless communication network and communication profiles WIA-PA - Edition 2.0 2015 IEC 0 3455 62604-1 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification 2015 IEC 0 - Edition 1.0 3456 62580-1 Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture - 2015 IEC 0 Edition 1.0 3457 62582-5 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring 2015 IEC 0 methods - Part 5: Optical time domain reflectometry - Edition 1.0 3458 62640 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses - Edition 2015 IEC 0 1.1; Consolidated Reprint 3459 62634 Radio data system (RDS) Receiver products and characteristics Methods of measurement - Edition 2.0 2015 IEC 0 3460 62631-3-2 Dielectric and resistive properties of solid insulating materials Part 3-2: Determination of resistive properties (DC 2015 IEC 0 methods) Surface resistance and surface resistivity - Edition 1.0 3461 62631-3-3 Dielectric and resistive properties of solid insulating materials Part 3-3: Determination of resistive properties (DC 2015 IEC 0 methods) Insulation resistance - Edition 1.0 3462 62443-2-4 Security for industrial automation and control systems Part 2-4: Security program requirements for IACS service providers 2015 IEC 0 - Edition 1.0 3463 62439-7 CORR INDUSTRIAL COMMUNICATION NETWORKS - HIGH AVAILABILITY AUTOMATION NETWORKS - Part 7: 2015 IEC 0 1 Ring-based Redundancy Protocol (RRP) - Edition 1.0 3464 62471-5 Photobiological safety of lamps and lamp systems - Part 5: Image projectors - Edition 1.0 2015 IEC 0 3465 62459 CORR 1 Sound system equipment Electroacoustical transducers Measurement of suspension parts - Edition 1.0 2015 IEC 0 3466 62379-3 Common control interface for networked digital audio and video products Part 3: Video - Edition 1.0 2015 IEC 0 3467 62386-201 Digital addressable lighting interface Part 201: Particular requirements for control gear Fluorescent lamps (device type 0) 2015 IEC 0 (REDLINE + - Edition 2.0 STAN 3468 62386-201 Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 2015 IEC 0 0) - Edition 2.0 3469 62391-1 Fixed electric double-layer capacitors for use in electric and electronic equipment Part 1: Generic specification - Edition 2015 IEC 0 (REDLINE + 2.0 STANDA 3470 62391-1 Fixed electric double-layer capacitors for use in electric and electronic equipment Part 1: Generic specification - Edition 2015 IEC 0 2.0 3471 62325-451-5 Framework for energy market communications - Part 451-5: Problem statement and status request business processes, 2015 IEC 0 contextual and assembly models for European market - Edition 1.0 3472 62321-6 Determination of certain substances in electrotechnical products Part 6: Polybrominated biphenyls and polybrominated 2015 IEC 0 diphenyl ethers in polymers by gas chromatographymass spectrometry (GC-MS) - Edition 1.0 3473 62321-7-1 Determination of certain substances in electrotechnical products Part 7-1: Hexavalent chromium Presence of hexavalent 2015 IEC 0 chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method - Edition 1.0 3474 62320-1 Maritime navigation and radiocommunication equipment and systems Automatic identification system (AIS) Part 1: AIS 2015 IEC 0 Base Stations Minimum operational and performance requirements, methods of testing and required test results - Edition 2.0 3475 62304 Medical device software Software life cycle processes - Edition 1.1; Consolidated Reprint 2015 IEC 0 3476 62317-13 Ferrite cores Dimensions Part 13: PQ-cores for use in power supply applications - Edition 2.0 2015 IEC 0 3477 62317-5 Ferrite cores Dimensions Part 5: EP-cores and associated parts for use in inductors and transformers - Edition 1.0 2015 IEC 0 3478 62317-6 Ferrite cores Dimensions Part 6: ETD-cores for use in power supplies - Edition 1.0 2015 IEC 0 3479 62317-11 Ferrite cores Dimensions Part 11: EC-cores for use in power supply applications - Edition 1.0 2015 IEC 0 3480 62368-1 CORR Audio/video, information and communication technology equipment Part 1: Safety requirements - Edition 2.0 2015 IEC 0 1 3481 62368-1 CORR AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT Part 1: Safety 2015 IEC 0 2 requirements - Edition 2.0 3482 62366-1 Medical devices - Part 1: Application of usability engineering to medical devices - Edition 1.0 2015 IEC 0 3483 62341-2-1 Organic light emitting diode (OLED) displays - Part 2-1: Essential ratings and characteristics of OLED display modules - 2015 IEC 0 Edition 1.0 3484 62341-6-2 Organic light emitting diode (OLED) displays Part 6-2: Measuring methods of visual quality and ambient performance - 2015 IEC 0 Edition 2.0 3485 62341-6-2 Organic light emitting diode (OLED) displays Part 6-2: Measuring methods of visual quality and ambient performance - 2015 IEC 0 Edition 2.0 3486 62343-1-2 Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized) - 2015 IEC 0 Edition 2.0 3487 62333-2 Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods - Edition 1.1 Consolidated Reprint 2015 IEC 0 3488 62320-3 Maritime navigation and radiocommunication equipment and systems Automatic identification system (AIS) Part 3: 2015 IEC 0 Repeater stations Minimum operational and performance requirements Methods of test and required test results - Edition 1.0 3489 62150-3 Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by 2015 IEC 0 mechanical disturbance in optical receptacles and transceiver interfaces - Edition 2.0 3490 62135-1 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation - Edition 2.0 2015 IEC 0 3491 62153-4-15 Metallic communication cable test methods Part 4-15: Electromagnetic compatibility (EMC) Test method for measuring 2015 IEC 0 transfer impedance and screening attenuation or coupling attenuation with triaxial cell - Edition 1.0 3492 62153-4-10 Metallic communication cable test methods Part 4-10: Electromagnetic compatibility (EMC) Transfer impedance and 2015 IEC 0 screening attenuation of feed-throughs and electromagnetic gaskets Double coaxial test method - Edition 2.0 3493 62153-4-4 Metallic communication cable test methods Part 4-4: Electromagnetic compatibility (EMC) Test method for measuring of 2015 IEC 0 the screening attenuation as up to and above 3 GHz, triaxial method - Edition 2.0 3494 62153-4-7 Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of 2015 IEC 0 transfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and assemblies up to and above 3 GHz Triaxi 3495 62153-4-7 Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of 2015 IEC 0 transfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and assemblies up to and above 3 GHz Triaxi 3496 62220-1-1 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1: Determination of the detective 2015 IEC 0 quantum efficiency - Detectors used in radiographic imaging - Edition 1.0 3497 62110 CORR 1 ELECTRIC AND MAGNETIC FIELD LEVELS GENERATED BY AC POWER SYSTEMS MEASUREMENT 2015 IEC 0 PROCEDURES WITH REGARD TO PUBLIC EXPOSURE - Edition 1.0 3498 62132-1 Integrated circuits Measurement of electromagnetic immunity Part 1: General conditions and definitions - Edition 2.0 2015 IEC 0 3499 62135-2 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements - Edition 2.0 2015 IEC 0 3500 62271-104 High-voltage switchgear and controlgear Part 104: Alternating current switches for rated voltages higher than 52 kV - 2015 IEC 0 Edition 2.0 3501 62264-4 Enterprise-control system integration Part 4: Object model attributes for manufacturing operations management integration 2015 IEC 0 - Edition 1.0 3502 62231-1 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV Part 1: Dimensional, 2015 IEC 0 mechanical and electrical characteristics - Edition 1.0 3503 62246-1 Reed switches Part 1: Generic specification - Edition 3.0 2015 IEC 0 3504 62279 Railway applications - Communication, signalling and processing systems - Software for railway control and protection 2015 IEC 0 systems - Edition 2.0 3505 62282-3-200 Fuel cell technologies Part 3-200: Stationary fuel cell power systems Performance test methods - Edition 2.0 2015 IEC 0 3506 62271-200 High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 2015 IEC 0 CORR 1 1 kV and up to and including 52 kV - Edition 2.0 3507 62271-202 High-voltage switchgear and controlgear Part 202: High-voltage/low-voltage prefabricated substation - Edition 2.0 2015 IEC 0 CORR 1 3508 62271-211 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 211: Direct connection between power transformers and 2015 IEC 0 CORR 1 gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Edition 1.0 3509 62271-3 High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 - Edition 2.0 2015 IEC 0 3510 IECQ OD 3801 IEC Quality Assessment System for Electronic Components (IECQ System) - Procedures for the issuing of IECQ LED 2015 IEC 0 Component Product Certificates of Conformity for Component Product(s) associated with LED lighting - Edition 1.0 3511 IECQ OD 3802 Quality system requirements for manufacturers seeking IECQ LED Component Product Certificates of Conformity for 2015 IEC 0 Component Product(s) associated with LED lighting - Edition 1.0 3512 IEC-IEEE NULL 2015 IEC 0 62271-37-013 3513 PAS 62948 Industrial networks Wireless communication network and communication profiles WIA-FA - Edition 1.0 2015 IEC 0 3514 PAS 62953 Industrial communication networks - Fieldbus specifications - Edition 1.0 2015 IEC 0 3515 PAS 62958 Clothes washing machines for household use - Method for measuring the microbial contamination reduction - Edition 1.0 2015 IEC 0 3516 PAS 62878-2-5 Device embedded substrate Guidelines Data format - Edition 1.0 2015 IEC 0 3517 PAS 61850-9-3 NULL 2015 IEC 0 3518 PAS 61076-3- Connectors for electronic equipment Product requirements Part 3-122: Detail specification for rugged 8-way, shielded, 2015 IEC 0 122 free and fixed connectors - Edition 1.0 3519 TR 60083 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC - Edition 7.0 2015 IEC 0 3520 TR 60601-4-3 Medical electrical equipment - Part 4-3: Guidance and interpretation - Considerations of unaddressed safety aspects in the 2015 IEC 0 third edition of IEC 60601-1 and proposals for new requirements - Edition 1.0 3521 TR 60825-17 Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power 2015 IEC 0 optical fibre communication systems - Edition 2.0 3522 TR 60865-2 Short-circuit currents - Calculation of effects - Part 2: Examples of calculation - Edition 2.0 2015 IEC 0 3523 TR 60919-2 AMENDMENT 1 Performance of high-voltage direct current (HVDC) systems with linecommutated converters Part 2: 2015 IEC 0 AMD 1 Faults and switching - Edition 2.0 3524 TR 60878 Graphical symbols for electrical equipment in medical practice - Edition 3.0 2015 IEC 0 3525 TR 61000-4-38 Electromagnetic compatibility (EMC) Part 4-38: Testing and measurement techniques Test, verification and calibration 2015 IEC 0 protocol for voltage fluctuation and flicker compliance test systems - Edition 1.0 3526 TR 61547-1 Equipment for general lighting purposes EMC immunity requirements Part 1: An objective voltage fluctuation immunity 2015 IEC 0 test method - Edition 1.0 3527 TR 61967-1-1 Integrated circuits Measurement of electromagnetic emissions Part 1-1: General conditions and definitions Near-field 2015 IEC 0 scan data exchange format - Edition 2.0 3528 TR 61968-900 Application integration at electric utilities System interfaces for distribution management Part 900: Guidance for 2015 IEC 0 implementation of IEC 61968-9 - Edition 1.0 3529 TR 61998 Model and framework for standardization in multimedia equipment and systems - Edition 2.0 2015 IEC 0 3530 TR 61857-2 Electrical insulation systems Procedures for thermal evaluation Part 2: Selection of the appropriate test method for 2015 IEC 0 evaluation and classification of electrical insulation systems - Edition 1.0 3531 TR 61850-80-3 Communication networks and systems for power utility automation Part 80-3: Mapping to web protocols - Requirements 2015 IEC 0 and technical choices - Edition 1.0 3532 TR 61832 Design and installation of on-line analyser systems - Guide to technical enquiry and bid evaluation - Edition 2.0 2015 IEC 0 3533 TR 61850-90- Communication networks and systems for power utility automation Part 90-12: Wide area network engineering guidelines 2015 IEC 0 12 - Edition 1.0 3534 TR 62471-3 Photobiological safety of lamps and lamp systems Part 3: Guidelines for the safe use of intense pulsed light source 2015 IEC 0 equipment on humans - Edition 1.0 3535 TR 62474-1 Material declaration for products of and for the electrotechnical industry Part 1: Guidance for the implementation of IEC 2015 IEC 0 62474 - Edition 1.0 3536 TR 62461 Radiation protection instrumentation Determination of uncertainty in measurement - Edition 2.0 2015 IEC 0 3537 TR 62614-2 Fibre optics Multimode launch conditions Part 2: Determination of launch condition requirements for measuring 2015 IEC 0 multimode attenuation - Edition 1.0 3538 TR 62617 Home laundry appliances Uncertainty reporting of measurements - Edition 2.0 2015 IEC 0 3539 TR 62357-200 Power systems management and associated information exchange Part 200: Guidelines for migration from Internet 2015 IEC 0 Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6) - Edition 1.0 3540 TR 62368-2 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 2015 IEC 0 62368-1 - Edition 2.0 3541 TR 62443-2-3 Security for industrial automation and control systems Part 2-3: Patch management in the IACS environment - Edition 1.0 2015 IEC 0 3542 TR 62343-6-9 Dynamic modules - Part 6-9: Design guide - Study of mechanisms and measurements of crosstalk in wavelength-selective 2015 IEC 0 switches - Edition 1.0 3543 TR 62343-6-7 Dynamic modules - Part 6-7: Design guide - Optical channel monitor - Edition 1.0 2015 IEC 0 3544 TR 62271-307 High-voltage switchgear and controlgear - Part 307: Guidance for the extension of validity of type tests of AC metal and 2015 IEC 0 solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV - Edition 1.0 3545 TR 62131-5 Environmental conditions - Vibration and shock of electrotechnical equipment - Part 5: Equipment during storage and 2015 IEC 0 handling - Edition 1.0 3546 TS 61968-14 Application integration at electric utilities - System interfaces for distribution management - Part 14: MultiSpeak - CIM 2015 IEC 0 harmonization - Edition 1.0; Includes Access to Additional Content 3547 TS 61936-2 Power installations exceeding 1 kV a.c. and 1,5 kV d.c. Part 2: d.c. - Edition 1.0 2015 IEC 0 3548 TS 62257-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 1: General introduction to IEC 2015 IEC 0 62257 series and rural electrification - Edition 3.0 3549 TS 62239-1 Process management for avionics Management plan Part 1: Preparation and maintenance of an electronic components 2015 IEC 0 management plan - Edition 2.0 3550 TS 62257-12-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 12-1: Selection of lamps and 2015 IEC 0 lighting appliances for off-grid electricity systems - Edition 2.0 3551 TS 62257-2 Recommendations for renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range 2015 IEC 0 of electrification systems - Edition 2.0 3552 TS 62257-2 Recommendations for renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range 2015 IEC 0 of electrification systems - Edition 2.0 3553 TS 62257-6 Recommendations for renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, 2015 IEC 0 maintenance and replacement - Edition 2.0 3554 TS 62257-6 Recommendations for renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, 2015 IEC 0 maintenance and replacement - Edition 2.0 3555 TS 62257-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical 2015 IEC 0 hazards - Edition 2.0 3556 TS 62257-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical 2015 IEC 0 hazards - Edition 2.0 3557 TS 62257-4 Recommendations for renewable energy and hybrid systems for rural electrification Part 4: System selection and design - 2015 IEC 0 Edition 2.0 3558 TS 62257-4 Recommendations for renewable energy and hybrid systems for rural electrification Part 4: System selection and design - 2015 IEC 0 Edition 2.0 3559 TS 62257-3 Recommendations for renewable energy and hybrid systems for rural electrification Part 3: Project development and 2015 IEC 0 management - Edition 2.0 3560 TS 62257-3 Recommendations for renewable energy and hybrid systems for rural electrification Part 3: Project development and 2015 IEC 0 management - Edition 2.0 3561 TS 61496-4-3 Safety of machinery Electro-sensitive protective equipment Part 4-3: Particular requirements for equipment using vision 2015 IEC 0 based protective devices (VBPD) Additional requirements when using stereo vision techniques (VBPDST) - Edition 1.0 3562 TS 61245 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems - Edition 2.0 2015 IEC 0 3563 TS 60871-3 Shunt capacitors for AC power systems having a rated voltage above 1 000 V Part 3: Protection of shunt capacitors and 2015 IEC 0 shunt capacitor banks - Edition 2.0 3564 TS 60079-39 Explosive atmospheres Part 39: Intrinsically safe systems with electronically controlled spark duration limitation - Edition 2015 IEC 0 1.0 3565 TS 60079-40 Explosive atmospheres Part 40: Requirements for process sealing between flammable process fluids and electrical systems 2015 IEC 0 - Edition 1.0 3566 TR 62971 Radiation instrumentation Radiation sources used in illicit trafficking detection standards Guidance and recommendations 2015 IEC 0 - Edition 1.0 3567 TR 62964 Graphical symbols for use on equipment Graphical symbols for multimedia equipment Current practice - Edition 1.0 2015 IEC 0 3568 TS 60870-5-601 Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 2015 IEC 0 companion standard - Edition 2.0 3569 TS 60870-5-601 Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 2015 IEC 0 companion standard - Edition 2.0 3570 TS 60216-7-1 Electrical insulation materials Thermal endurance properties Part 7-1: Accelerated determination of relative thermal 2015 IEC 0 endurance using analytical test methods (RTEA) Instructions for calculations based on activation energy - Edition 1.0 3571 TR 62757 Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) 2015 IEC 0 and flexible ac transmission systems (FACTS) and their valve halls - Edition 1.0 3572 TR 62921 Quantification methodology for greenhouse gas emissions for computers and monitors - Edition 2.0 2015 IEC 0 3573 TR 62874 Guidance on the interpretation of carbon dioxide and 2-furfuraldehyde as markers of paper thermal degradation in 2015 IEC 0 insulating mineral oil - Edition 1.0 3574 TR 62878-2-2 Device embedded substrate Part 2-2: Guidelines Electrical testing - Edition 1.0 2015 IEC 0 3575 TR 62987 Nuclear power plants - Instrumentation and control systems important to safety - Use of Failure Mode and Effects Analysis 2015 IEC 0 (FMEA) and related methods to support the justification of systems - Edition 1.0 3576 TR 63017 Flexible printed circuit boards (FPCBs) Method of compensation of impedance variations - Edition 1.0 2015 IEC 0 3577 TR 63018 Flexible printed circuit boards (FPCBs) Method to decrease signal loss by using noise suppression materials - Edition 1.0 2015 IEC 0 3578 TR 62687 Graphical symbols for use on equipement Vocabulary - Edition 2.0 2015 IEC 0 3579 TR 62687 Graphical symbols for use on equipement Vocabulary - Edition 2.0 2015 IEC 0 3580 TR 62710 Residual current devices (RCDs) associated with additional function(s) - Edition 1.0 2015 IEC 0 3581 TR 62746-2 Systems interface between customer energy management system and the power management system Part 2: Use cases and 2015 IEC 0 requirements - Edition 1.0 3582 TS 62607-4-1 Nanomanufacturing Key control characteristics Part 4-1: Cathode nanomaterials for nano-enabled electrical energy 2015 IEC 0 storage Electrochemical characterisation, 2-electrode cell method - Edition 2.0 3583 TS 62600-201 Marine energy Wave, tidal and other water current converters Part 201: Tidal energy resource assessment and 2015 IEC 0 characterization - Edition 1.0 3584 TS 62600-10 Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy 2015 IEC 0 converters (MECs) - Edition 1.0 3585 TS 62600-101 Marine energy Wave, tidal and other water current converters Part 101: Wave energy resource assessment and 2015 IEC 0 characterization - Edition 1.0 3586 TS 62578 Power electronics systems and equipment Operation conditions and characteristics of active infeed converter (AIC) 2015 IEC 0 applications including design recommendations for their emission values below 150 kHz - Edition 2.0 3587 TS 62607-4-3 Nanomanufacturing Key control characteristics Part 4-3: Nano-enabled electrical energy storage Contact and coating 2015 IEC 0 resistivity measurements for nanomaterials - Edition 1.0 3588 TS 62791 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of gray-scale medical 2015 IEC 0 ultrasound scanners applicable to a broad range of transducer types - Edition 1.0 3589 TS 62746-3 Systems interface between customer energy management system and the power management system - Part 3: Architecture - 2015 IEC 0 Edition 1.0 3590 TS 62749 Assessment of power quality Characteristics of electricity supplied by public networks - Edition 1.0 2015 IEC 0 3591 TS 62735-1 Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in 2015 IEC 0 data centres and telecom central offices Part 1: Plug and socket-outlet system for 2,6 kW - Edition 1.0 3592 TS 62686-1 Process management for avionics Electronic components for aerospace, defence and high performance (ADHP) 2015 IEC 0 applications Part 1: General requirements for high reliability integrated circuits and discrete semiconductors - Edition 2.0 3593 TS 62325-504 Framework for energy market communications Part 504: Utilization of web services for electronic data interchanges on the 2015 IEC 0 European energy market for electricity - Edition 1.0 3594 TS 62804-1 Photovoltaic (PV) modules Test methods for the detection of potential-induced degradation Part 1: Crystalline silicon - 2015 IEC 0 Edition 1.0 3595 TS 62835 Electric toasters for household and similar use Methods and measurements for improving accessibility - Edition 1.0 2015 IEC 0 3596 TS 62896 Hybrid insulators for a.c. and d.c. high-voltage applications Definitions, test methods and acceptance criteria - Edition 1.0 2015 IEC 0 3597 TS 62910 Utility-interconnected photovoltaic inverters Test procedure for low voltage ride-through measurements - Edition 1.0 2015 IEC 0 3598 TS 62871-1 Professional video storage products Tape-less camera recorder using MXF file format Encoding guidelines Part 1: MXF 2015 IEC 0 Operational Patterns - Edition 1.0 3599 TS 62872 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid - 2015 IEC 0 Edition 1.0 3600 TS 62878-2-1 Device embedded substrate Part 2-1: Guidelines General description of technology - Edition 1.0 2015 IEC 0 3601 TS 62878-2-3 Device embedded substrate Part 2-3: Guidelines Design guide - Edition 1.0 2015 IEC 0 3602 TS 62878-2-4 Device embedded substrate Part 2-4: Guidelines Test element groups (TEG) - Edition 1.0 2015 IEC 0 3603 60601-1-11 Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance Collateral 2015 IEC 0 (REDLINE + Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare STA environment - Edition 2 3604 60601-1-11 NULL 2015 IEC 0 (REDLINE) 3605 60601-1-11 Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance Collateral 2015 IEC 0 Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment - Edition 2 3606 60599 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis - 2015 IEC 0 Edition 3.0 3607 60598-2-5 Luminaires Part 2-5: Particular requirements Floodlights - Edition 3.0 2015 IEC 0 3608 60598-1 CORR LUMINAIRES Part 1: General requirements and tests - Edition 8.0 2015 IEC 0 2 3609 60598-1 CORR Luminaires Part 1: General requirements and tests - Edition 8.0 2015 IEC 0 1 3610 60534-8-4 Industrial-process control valves Part 8-4: Noise considerations Prediction of noise generated by hydrodynamic flow - 2015 IEC 0 Edition 3.0 3611 60529 CORR 2 Degrees of Protection Provided by Enclosures (IP Code) - Edition 2.2 Consolidated Reprint 2015 IEC 0 3612 60533 Electrical and electronic installations in ships Electromagnetic compatibility (EMC) Ships with a metallic hull - Edition 2015 IEC 0 (REDLINE + 3.0 STANDARD 3613 60533 Electrical and electronic installations in ships Electromagnetic compatibility (EMC) Ships with a metallic hull - Edition 2015 IEC 0 3.0 3614 60534-2-1 Industrial-process control valves Part 2-1: Flow capacity Sizing equations for fluid flow under installed conditions - 2015 IEC 0 CORR 1 Edition 2.0 3615 60534-2-3 Industrial-process control valves Part 2-3: Flow capacity Test procedures - Edition 3.0 2015 IEC 0 3616 60534-2-3 Industrial-process control valves Part 2-3: Flow capacity Test procedures - Edition 3.0 2015 IEC 0 3617 60601-2-33 Medical electrical equipment Part 2-33: Particular requirements for the basic safety and essential performance of magnetic 2015 IEC 0 resonance equipment for medical diagnosis - Edition 3.2 Consolidated Reprint 3618 60601-2-37 Medical electrical equipment Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic 2015 IEC 0 medical diagnostic and monitoring equipment - Edition 2.1; Consolidated Reprint 3619 60601-2-45 Medical electrical equipment Part 2-45: Particular requirements for the basic safety and essential performance of 2015 IEC 0 mammographic X-ray equipment and mammographic stereotactic devices - Edition 3.1; Consolidated Reprint 3620 60633 Terminology for high-voltage direct current (HVDC) transmission - Edition 2.2 Consolidated Reprint 2015 IEC 0 3621 60617 Graphical symbols for diagrams 2015 IEC 0 DATABASE SNAPSHOTS 3622 60601-2-66 Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing 2015 IEC 0 instruments and hearing instrument systems - Edition 2.0 3623 60601-2-8 Medical electrical equipment Part 2-8: Particular requirements for the basic safety and essential performance of therapeutic 2015 IEC 0 X-ray equipment operating in the range 10 kV to 1 MV - Edition 2.1; Consolidated Reprint 3624 60601-2-52 Medical electrical equipment Part 2-52: Particular requirements for the basic safety and essential performance of medical 2015 IEC 0 beds - Edition 1.1 Consolidated Reprint 3625 60601-2-54 Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray 2015 IEC 0 equipment for radiography and radioscopy - Edition 1.1; Consolidated Reprint 3626 60603-7-81 Connectors for electronic equipment Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data 2015 IEC 0 transmissions with frequencies up to 2 000 MHz - Edition 1.0 3627 60455-2 Resin Based Reactive Compounds Used for Electrical Insulation - Part 2: Methods of Test - Edition 3.0 2015 IEC 0 3628 60512-29-100 Connectors for electronic equipment Tests and measurements Part 29-100: Signal integrity tests up to 500 MHz on M12 2015 IEC 0 style connectors Tests 29a to 29g - Edition 1.0 3629 60519-1 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements - Edition 5.0 2015 IEC 0 3630 60512-1-101 Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification - Edition 1.0 2015 IEC 0 3631 60364-4-44 Low-voltage electrical installations Part 4-44: Protection for safety Protection against voltage disturbances and 2015 IEC 0 electromagnetic disturbances - Edition 2.1 Consolidated Reprint 3632 60364-5-53 Electrical Installations of Buildings - Part 5-53: Selection and Erection of Electrical Equipment - Isolation, Switching and 2015 IEC 0 Control - Edition 3.2 Consolidated Reprint 3633 60364-7-722 Low-voltage electrical installations Part 7-722: Requirements for special installations or locations Supplies for electric 2015 IEC 0 vehicles - Edition 1.0 3634 60401-3 Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in 2015 IEC 0 manufacturers catalogues of transformer and inductor cores - Edition 2.0 3635 60401-3 Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in 2015 IEC 0 manufacturers catalogues of transformer and inductor cores - Edition 2.0 3636 60404-8-1 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials - Edition 3.0 2015 IEC 0 3637 60404-5 Magnetic materials Part 5: Permanent magnet (magnetically hard) materials Methods of measurement of magnetic 2015 IEC 0 properties - Edition 3.0 3638 60404-5 Magnetic materials Part 5: Permanent magnet (magnetically hard) materials Methods of measurement of magnetic 2015 IEC 0 (REDLINE + properties - Edition 3.0 STANDA 3639 60417 Database Snapshot - Graphical symbols for use on equipment 2015 IEC 0 DATABASE SNAPSHOTS 3640 60424-1 Ferrite cores Guidelines on the limits of surface irregularities Part 1: General specification - Edition 2.0 2015 IEC 0 3641 60424-1 Ferrite cores Guidelines on the limits of surface irregularities Part 1: General specification - Edition 2.0 2015 IEC 0 3642 60424-8 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores - Edition 1.0 2015 IEC 0 3643 60424-4 Ferrite cores Guidelines on the limits of surface irregularities Part 4: Ring-cores - Edition 2.0 2015 IEC 0 3644 60424-4 Ferrite cores Guidelines on the limits of surface irregularities Part 4: Ring-cores - Edition 2.0 2015 IEC 0 3645 60424-3 Ferrite cores Guidelines on the limits of surface irregularities Part 3: ETD-cores, EER-cores, EC-cores and E-cores - 2015 IEC 0 Edition 2.0 3646 60424-2 Ferrite cores Guidelines on the limits of surface irregularities Part 2: RM-cores - Edition 2.0 2015 IEC 0 3647 60424-2 Ferrite cores Guidelines on the limits of surface irregularities Part 2: RM-cores - Edition 2.0 2015 IEC 0 3648 60384-20 Fixed capacitors for use in electronic equipment Part 20: Sectional specification Fixed metallized polyphenylene sulfide 2015 IEC 0 film dielectric surface mount d.c. capacitors - Edition 3.0 3649 60384-19 Fixed capacitors for use in electronic equipment Part 19: Sectional specification: Fixed metallized polyethylene- 2015 IEC 0 terephthalate film dielectric surface mount d.c. capacitors - Edition 3.0 3650 60384-23 Fixed capacitors for use in electronic equipment Part 23: Sectional specification Fixed metallized polyethylene 2015 IEC 0 naphthalate film dielectric surface mount d.c. capacitors - Edition 2.0 3651 60384-25 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface 2015 IEC 0 mount capacitors with conductive polymer solid electrolyte - Edition 2.0 3652 60384-24 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface 2015 IEC 0 mount capacitors with conductive polymer solid electrolyte - Edition 2.0 3653 60384-9 Fixed capacitors for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, 2015 IEC 0 Class 2 - Edition 4.0 3654 60384-8 Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, 2015 IEC 0 Class 1 - Edition 4.0 3655 60393-5 Potentiometers for use in electronic equipment Part 5: Sectional specification Single-turn rotary low-power wirewound 2015 IEC 0 and non-wirewound potentiometers - Edition 3.0 3656 60393-5 Potentiometers for use in electronic equipment Part 5: Sectional specification Single-turn rotary low-power wirewound 2015 IEC 0 and non-wirewound potentiometers - Edition 3.0 3657 60393-6 Potentiometers for use in electronic equipment Part 6: Sectional specification Surface mount preset potentiometers - 2015 IEC 0 Edition 2.0 3658 60393-6 Potentiometers for use in electronic equipment Part 6: Sectional specification Surface mount preset potentiometers - 2015 IEC 0 Edition 2.0 3659 60393-2 Potentiometers for use in electronic equipment Part 2: Sectional specification Lead-screw actuated and rotary preset 2015 IEC 0 potentiometers - Edition 3.0 3660 60393-2 Potentiometers for use in electronic equipment Part 2: Sectional specification Lead-screw actuated and rotary preset 2015 IEC 0 potentiometers - Edition 3.0 3661 60398 Installations for electroheating and electromagnetic processing General performance test methods - Edition 3.0 2015 IEC 0 3662 60335-2-58 Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashing 2015 IEC 0 machines - Edition 3.2; Consolidated Reprint 3663 60335-2-65 Household and similar electrical appliances Safety Part 2-65: Particular requirements for air-cleaning appliances - Edition 2015 IEC 0 2.2 Consolidated Reprint 3664 60335-2-75 Household and similar electrical appliances Safety Part 2-75: Particular requirements for commercial dispensing 2015 IEC 0 appliances and vending machines - Edition 3.1 3665 60335-2-90 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens - 2015 IEC 0 Edition 4.0 3666 60335-2-89 AMENDMENT 2 Household and similar electrical appliances Safety Part 2-89: Particular requirements for commercial 2015 IEC 0 AMD 2 refrigerating appliances with an incorporated or remote refrigerant unit or compressor - Edition 2.1 3667 60335-2-82 Household and similar electrical appliances Safety Part 2-82: Particular requirements for amusement machines and 2015 IEC 0 personal service machines - Edition 2.2 Consolidated Reprint 3668 60335-2-95 Household and similar electrical appliances Safety Part 2-95: Particular requirements for drives for vertically moving 2015 IEC 0 garage doors for residential use - Edition 3.1 Consolidated Reprint 3669 60335-2-8 Household and similar electrical appliances Safety Part 2-8: Particular requirements for shavers, hair clippers and similar 2015 IEC 0 appliances - Edition 6.1 3670 60335-2-81 Household and similar electrical appliances Safety Part 2-81: Particular requirements for foot warmers and heating mats - 2015 IEC 0 Edition 3.0 3671 60335-2-80 Household and similar electrical appliances Safety Part 2-80: Particular requirements for fans - Edition 3.0 2015 IEC 0 (REDLINE + STA 3672 60335-2-80 Household and similar electrical appliances Safety Part 2-80: Particular requirements for fans - Edition 3.0 2015 IEC 0 3673 60335-2-3 AMENDMENT 1 Household and similar electrical appliances Safety Part 2-3: Particular requirements for electric irons - 2015 IEC 0 AMD 1 Edition 6.1; Consolidated Reprint 3674 60335-2-3 Household and similar electrical appliances Safety Part 2-3: Particular requirements for electric irons - Edition 6.1; 2015 IEC 0 Consolidated Reprint 3675 60335-2-25 Household and similar electrical appliances Safety Part 2-25: Particular requirements for microwave ovens, including 2015 IEC 0 combination microwave ovens - Edition 6.2 3676 60335-2-27 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-27: Particular requirements for 2015 IEC 0 AMD 2 CORR appliances for skin exposure to optical radiation - Edition 5.2 1 3677 60335-2-111 Household and similar electrical appliances Safety Part 2-111: Particular requirements for electric ondol mattress with a 2015 IEC 0 non-flexible heated part - Edition 1.0 3678 60335-2-17 Household and similar electrical appliances Safety Part 2-17: Particular requirements for blankets, pads, clothing and 2015 IEC 0 similar flexible heating appliances - Edition 3.1 Consolidated Reprint 3679 60335-2-34 NULL 2015 IEC 0 CORR 1 3680 60335-2-34 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors - Edition 5.2 2015 IEC 0 Consolidated Reprint 3681 60335-2-27 Household and similar electrical appliances Safety Part 2-27: Particular requirements for appliances for skin exposure to 2015 IEC 0 optical radiation - Edition 5.2 Consolidated Reprint 3682 60335-2-54 Household and similar electrical appliances Safety Part 2-54: Particular requirements for surface-cleaning appliances for 2015 IEC 0 household use employing iquids or steam - Edition 4.1 CONSOLIDATED REPRINT 3683 60317-39 Specifications for particular types of winding wires Part 39: Glass-fibre braided resin or varnish-impregnated, bare or 2015 IEC 0 enamelled rectangular copper wire, temperature index 180 - Edition 2.0 3684 60317-4 Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 2015 IEC 0 130 - Edition 4.0 3685 60317-40 Specifications for particular types of winding wires Part 40: Glass-fibre braided resin or varnish-impregnated, bare or 2015 IEC 0 enamelled rectangular copper wire, temperature index 200 - Edition 2.0 3686 60317-33 Specifications for particular types of winding wires Part 33: Glass fibre wound, resin or varnish impregnated, bare or 2015 IEC 0 enamelled rectangular copper wire, temperature index 200 - Edition 2.0 3687 60317-32 Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or 2015 IEC 0 enamelled rectangular copper wire, temperature index 155 - Edition 2.0 3688 60317-31 Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or 2015 IEC 0 enamelled rectangular copper wire, temperature index 180 - Edition 2.0 3689 60317-59 Specifications for particular types of winding wires Part 59: Polyamide-imide enamelled round copper wire, class 240 - 2015 IEC 0 Edition 1.0 3690 60320-1 Appliance couplers for household and similar general purposes Part 1: General requirements - Edition 3.0 2015 IEC 0 3691 60332-1-3 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single 2015 IEC 0 insulated wire or cable Procedure for determination of flaming droplets/particles - Edition 1.1 Consolidated Reprint 3692 60332-1-2 Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single 2015 IEC 0 insulated wire or cable Procedure for 1 kW pre-mixed flame - Edition 1.1 Consolidated Reprint 3693 60332-1-1 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single 2015 IEC 0 insulated wire or cable Apparatus - Edition 1.1 3694 60335-2-103 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and 2015 IEC 0 windows - Edition 3.0 3695 60335-2-11 Household and similar electrical appliances Safety Part 2-11: Particular requirements for tumble dryers - Edition 7.2; 2015 IEC 0 Consolidated Reprint 3696 60061-1 AMD Amendment 52 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2015 IEC 0 52 caps - Edition 3.35 3697 60061-1 AMD Amendment 53 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2015 IEC 0 53 caps - Edition 3.35 3698 60061-2 AMD Amendment 49 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2015 IEC 0 49 Lampholders - Edition 3.32 3699 60061-2 AMD Amendment 50 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2015 IEC 0 50 Lampholders - Edition 3.32 3700 60061-3 AMD Amendment 50 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2015 IEC 0 50 - Edition 3.44 3701 60061-3 AMD Amendment 51 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2015 IEC 0 51 - Edition 3.44 3702 60050-604 NULL 2015 IEC 0 AMD 2 3703 60050-705 AMENDMENT 1 International Electrotechnical Vocabulary Part 705: Radio wave propagation - Edition 1.0 2015 IEC 0 AMD 1 3704 60050-903 AMENDMENT 2 International Electrotechnical Vocabulary Part 903: Risk assessment - Edition 1.0 2015 IEC 0 AMD 2 3705 60050-904 AMENDMENT 1 International Electrotechnical Vocabulary Part 904: Environmental standardization for electrical and 2015 IEC 0 AMD 1 electronic products and systems - Edition 1.0 3706 60050-815 International Electrotechnical Vocabulary Part 815: Superconductivity - Edition 2.0 2015 IEC 0 3707 60034-27-3 Rotating electrical machines Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating 2015 IEC 0 electrical machines - Edition 1.0 3708 60050-426 AMENDMENT 1 International Electrotechnical Vocabulary Part 426: Equipment for explosive atmospheres - Edition 2.0 2015 IEC 0 AMD 1 3709 60050-442 AMENDMENT 1 International Electrotechnical Vocabulary Part 442: Electrical accessories - Edition 1.0 2015 IEC 0 AMD 1 3710 60050-442 AMENDMENT 2 International Electrotechnical Vocabulary - Part 442: Electrical accessories - Edition 1.0 2015 IEC 0 AMD 2 3711 60050-471 AMENDMENT 1 International Electrotechnical Vocabulary Part 471: Insulators - Edition 2.0 2015 IEC 0 AMD 1 3712 60050-541 AMENDMENT 1 International Electrotechnical Vocabulary Part 541: Printed circuits - Edition 1.0 2015 IEC 0 AMD 1 3713 60050-161 AMENDMENT 5 International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility - Edition 1.0 2015 IEC 0 AMD 5 3714 60050-300 AMENDMENT 1 International Electrotechnical Vocabulary Electrical and electronic measurements and measuring 2015 IEC 0 AMD 1 instruments Part 312: General terms relating to electrical measurements - Edition 1.0 3715 60050-212 AMENDMENT 1 International Electrotechnical Vocabulary - Part 212: Electrical insulating solids, liquids, and gases - 2015 IEC 0 AMD 1 Edition 2.0 3716 60050-212 AMENDMENT 2 International Electrotechnical Vocabulary - Part 212: Electrical insulating solids, liquids, and gases - 2015 IEC 0 AMD 2 Edition 2.0 3717 60050-192 International electrotechnical vocabulary Part 192: Dependability - Edition 1.0 2015 IEC 0 3718 60086-2 Primary batteries Part 2: Physical and electrical specifications - Edition 13.0 2015 IEC 0 3719 60086-1 Primary batteries - Part 1: General - Edition 12.0 2015 IEC 0 (REDLINE + STANDA 3720 60086-1 Primary batteries - Part 1: General - Edition 12.0 2015 IEC 0 3721 60079-7 Explosive atmospheres - Part 7: Equipment protection by increased safety "e" - Edition 5.0 2015 IEC 0 3722 60079-30-2 Explosive atmospheres Part 30-2: Electrical resistance trace heating Application guide for design, installation and 2015 IEC 0 maintenance - Edition 1.0 3723 60079-6 Explosive atmospheres Part 6: Equipment protection by liquid immersion "o" - Edition 4.0 2015 IEC 0 3724 60079-5 Explosive atmospheres - Part 5: Equipment protection by powder filling â__qâ__ - Edition 4.0 2015 IEC 0 (REDLINE + STANDA 3725 60079-5 Explosive atmospheres - Part 5: Equipment protection by powder filling â__qâ__ - Edition 4.0 2015 IEC 0 3726 60079-28 Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation - Edition 2.0 2015 IEC 0 (REDLINE + STAND 3727 60079-19 Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation - Edition 3.1 Consolidated Reprint 2015 IEC 0 3728 60079-2 CORR Explosive atmospheres Part 2: Equipment protection by pressurized enclosure "p" - Edition 6.0 2015 IEC 0 1 3729 60079-29-2 Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable 2015 IEC 0 (REDLINE + gases and oxygen - Edition 2.0 STA 3730 60079-29-2 Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable 2015 IEC 0 gases and oxygen - Edition 2.0 3731 60079-28 Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation - Edition 2.0 2015 IEC 0 3732 60079-32-2 Explosive atmospheres Part 32-2: Electrostatics hazards Tests - Edition 1.0 2015 IEC 0 3733 60079-30-1 Explosive atmospheres Part 30-1: Electrical resistance trace heating General and testing requirements - Edition 1.0 2015 IEC 0 3734 60079-10-2 REDLINE VERSION Explosive atmospheres Part 10-2: Classification of areas Explosive dust atmospheres - Edition 2.0 2015 IEC 0 (REDLINE + STA 3735 60079-10-2 NULL 2015 IEC 0 (REDLINE) 3736 60079-10-2 Explosive atmospheres Part 10-2: Classification of areas Explosive dust atmospheres - Edition 2.0 2015 IEC 0 3737 60079-10-1 Explosive atmospheres Part 10-1: Classification of areas Explosive gas atmospheres - Edition 2.0 2015 IEC 0 (REDLINE + STA 3738 60079-10-1 EXPLOSIVE ATMOSPHERES - Part 10-1: Classification of areas - Explosive gas atmospheres - Edition 2.0 2015 IEC 0 CORR 1 3739 60079-10-1 Explosive atmospheres Part 10-1: Classification of areas Explosive gas atmospheres - Edition 2.0 2015 IEC 0 3740 60063 Preferred Number Series for Resistors and Capacitors - Edition 3.0 2015 IEC 0 3741 60068-2-58 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization 2015 IEC 0 and to soldering heat of surface mounting devices (SMD) - Edition 4.0 3742 60068-2-60 Environmental testing Part 2-60: Tests Test Ke: Flowing mixed gas corrosion test - Edition 3.0 2015 IEC 0 (REDLINE + STA 3743 60068-2-60 Environmental testing Part 2-60: Tests Test Ke: Flowing mixed gas corrosion test - Edition 3.0 2015 IEC 0 3744 60068-2-39 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with 2015 IEC 0 low air pressure tests - Edition 2.0 3745 60076-15 Power transformers Part 15: Gas-filled power transformers - Edition 2.0 2015 IEC 0 3746 60127-3 Miniature fuses Part 3: Sub-miniature fuse-links - Edition 3.0 2015 IEC 0 3747 60127-1 AMD NULL 2015 IEC 0 2 3748 60127-1 Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links - Edition 2.2 2015 IEC 0 Consolidated Reprint 3749 60127-7 Miniature fuses Part 7: Miniature fuse-links for special applications - Edition 2.0 2015 IEC 0 3750 60143-3 Series capacitors for power systems - Part 3: Internal fuses - Edition 2.0 2015 IEC 0 3751 60143-1 Series capacitors for power systems Part 1: General - Edition 5.0 2015 IEC 0 3752 60118-0 Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids - Edition 3.0 2015 IEC 0 3753 60172 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires - Edition 4.0 2015 IEC 0 3754 60183 Guidance for the selection of high-voltage A.C. cable systems - Edition 3.0 2015 IEC 0 3755 60270 High-voltage test techniques Partial discharge measurements - Edition 3.1; Consolidated Reprint 2015 IEC 0 3756 60287-2-1 Electric cables Calculation of the current rating Part 2-1: Thermal resistance Calculation of thermal resistance - Edition 2015 IEC 0 2.0 3757 60287-2-1 Electric cables Calculation of the current rating Part 2-1: Thermal resistance Calculation of thermal resistance - Edition 2015 IEC 0 (REDLINE + 2.0 STAN 3758 60286-2 Packaging of components for automatic handling Part 2: Packaging of components with unidirectional leads on continuous 2015 IEC 0 tapes - Edition 4.0 3759 60297-3-109 Mechanical structures for electrical and electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) 2015 IEC 0 series Part 3-109: Dimensions of chassis for embedded computing devices - Edition 1.0 3760 60317-0-4 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish 2015 IEC 0 impregnated, bare or enamelled rectangular copper wire - Edition 3.0 3761 60317-0-9 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium 2015 IEC 0 wire - Edition 1.0 3762 60194 Printed board design, manufacture and assembly - Terms and definitions - Edition 6.0 2015 IEC 0 3763 60794-3-10 Optical fibre cables Part 3-10: Outdoor cables Family specification for duct, directly buried or lashed aerial optical 2015 IEC 0 telecommunication cables - Edition 3.0 3764 60794-3-21 Optical fibre cables Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication 2015 IEC 0 cables for use in premises cabling - Edition 2.0 3765 60794-1-21 Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods - 2015 IEC 0 Edition 1.0 3766 60794-1-1 Optical fibre cables Part 1-1: Generic specification General - Edition 4.0 2015 IEC 0 3767 60836 Specifications for unused silicone insulating liquids for electrotechnical purposes - Edition 3.0 2015 IEC 0 3768 60846-2 Radiation protection instrumentation Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X 2015 IEC 0 and gamma radiation Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protection p 3769 60846-2 Radiation protection instrumentation Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X 2015 IEC 0 and gamma radiation Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protection p 3770 60870-5-101 AMENDMENT 1 Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic 2015 IEC 0 AMD 1 telecontrol tasks - Edition 2.0 3771 60862-1 Surface acoustic wave (SAW) filters of assessed quality Part 1: Generic specification - Edition 3.0 2015 IEC 0 3772 60851-2 Winding wires Test methods Part 2: Determination of dimensions - Edition 3.1; Consolidated Reprint 2015 IEC 0 3773 60974-10 AMD AMENDMENT 1 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements - Edition 3.0 2015 IEC 0 1 3774 60974-6 Arc welding equipment Part 6: Limited duty equipment - Edition 3.0 2015 IEC 0 3775 60968 CORR 1 Self-ballasted fluorescent lamps for general lighting services Safety requirements - Edition 3.0 2015 IEC 0 3776 60968 Self-ballasted fluorescent lamps for general lighting services Safety requirements - Edition 3.0 2015 IEC 0 3777 60966-2-7 Radio frequency and coaxial cable assemblies - Part 2-7: Detail specification for cable assemblies for radio and TV 2015 IEC 0 receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors - Edition 1.0 3778 60958-3 AMD AMENDMENT 2 Digital audio interface Part 3: Consumer applications - Edition 3.0 2015 IEC 0 2 3779 60958-3 Digital audio interface Part 3: Consumer applications - Edition 3.2 Consolidated Reprint 2015 IEC 0 3780 60940 Guidance Information on the Application of Capacitors, Resistors, Inductors, and Complete Filter Units for Radio 2015 IEC 0 Interference Suppression - Edition 2.0 3781 60947-3 Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units 2015 IEC 0 - Edition 3.2 Consolidated Reprint 3782 60939-3 Passive filter units for electromagnetic interference suppression Part 3: Passive filter units for which safety tests are 2015 IEC 0 appropriate - Edition 1.0 3783 60929 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps Performance requirements - Edition 4.1; 2015 IEC 0 Consolidated Reprint 3784 60904-2 Photovoltaic devices Part 2: Requirements for photovoltaic reference devices - Edition 3.0 2015 IEC 0 (REDLINE + STANDA 3785 60904-2 NULL 2015 IEC 0 (REDLINE) 3786 60904-2 Photovoltaic devices Part 2: Requirements for photovoltaic reference devices - Edition 3.0 2015 IEC 0 3787 60898-1 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit- 2015 IEC 0 breakers for a.c. operation - Edition 2.0 3788 60875-1 Fibre optic interconnecting devices and passive components - Non-wavelengthselective fibre optic branching devices - Part 2015 IEC 0 1: Generic specification - Edition 6.0 3789 60885-3 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded 2015 IEC 0 (REDLINE + power cables - Edition 2.0 STANDA 3790 60885-3 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded 2015 IEC 0 power cables - Edition 2.0 3791 60730-2-6 Automatic electrical controls for household and similar use Part 2-6: Particular requirements for automatic electrical 2015 IEC 0 pressure sensing controls including mechanical requirements - Edition 3.0 3792 60730-2-9 Automatic electrical controls Part 2-9: Particular requirements for temperature sensing control - Edition 4.0 2015 IEC 0 (REDLINE + STAN 3793 60730-2-9 Automatic electrical controls Part 2-9: Particular requirements for temperature sensing control - Edition 4.0 2015 IEC 0 3794 60730-2-7 Automatic electrical controls Part 2-7: Particular requirements for timers and time switches - Edition 3.0 2015 IEC 0 3795 60730-2-8 AMENDMENT 2 Automatic electrical controls for household and similar use Part 2-8: Particular requirements for 2015 IEC 0 AMD 2 electrically operated water valves, including mechanical requirements - Edition 2.0 3796 60730-2-8 Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water 2015 IEC 0 valves, including mechanical requirements - Edition 2.2; Consolidated Reprint 3797 60730-1 Automatic electrical controls Part 1: General requirements - Edition 5.1; Consolidated Reprint 2015 IEC 0 3798 60730-1 Automatic electrical controls Part 1: General requirements - Edition 5.1; Consolidated Reprint 2015 IEC 0 3799 60730-2-12 Automatic electrical controls - Part 2-12: Particular requirements for electrically operated door locks - Edition 3.0 2015 IEC 0 3800 60793-1-43 Optical fibres Part 143: Measurement methods and test procedures Numerical aperture measurement - Edition 2.0 2015 IEC 0 3801 60793-2-30 Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres - Edition 4.0 2015 IEC 0 3802 60793-2-40 Optical fibres Part 2-40: Product specifications Sectional specification for category A4 multimode fibres - Edition 4.0 2015 IEC 0 3803 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres - Edition 5.0 2015 IEC 0 3804 60794-1-1 Optical fibre cables Part 1-1: Generic specification General - Edition 4.0 2015 IEC 0 (REDLINE + STAN 3805 60793-2 Optical fibres Part 2: Product specifications General - Edition 8.0 2015 IEC 0 3806 60793-2-10 Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres - Edition 5.0 2015 IEC 0 3807 60793-2-20 Optical fibres Part 2-20: Product specifications Sectional specification for category A2 multimode fibres - Edition 3.0 2015 IEC 0 3808 60695-11-20 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method - Edition 2.0 2015 IEC 0 3809 60695-1-12 Fire hazard testing Part 1-12: Guidance for assessing the fire hazard of electrotechnical products Fire safety engineering - 2015 IEC 0 Edition 1.0 3810 60691 Thermal-links Requirements and application guide - Edition 4.0 2015 IEC 0 3811 60691 Thermal-links Requirements and application guide - Edition 4.0 2015 IEC 0 3812 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing - Edition 2.0 2015 IEC 0 (REDLINE + STANDA 3813 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing - Edition 2.0 2015 IEC 0 3814 60702-1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 1: Cables - Edition 3.1 2015 IEC 0 Consolidated Reprint 3815 60702-2 AMD AMENDMENT 1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: 2015 IEC 0 1 Terminations - Edition 2.0 3816 60702-2 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations - Edition 2.1 2015 IEC 0 Consolidated Reprint 3817 60728-7-1 Cable networks for television signals, sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant 2015 IEC 0 status monitoring Physical (PHY) Layer Specification - Edition 1.1; Consolidated Reprint 3818 60728-5 Cable networks for television signals, sound signals and interactive services Part 5: Headend equipment - Edition 3.0 2015 IEC 0 3819 60728-5 Cable networks for television signals, sound signals and interactive services Part 5: Headend equipment - Edition 3.0 2015 IEC 0 3820 60670-1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General 2015 IEC 0 requirements - Edition 2.0 3821 60670-22 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular 2015 IEC 0 requirements for connecting boxes and enclosures - Edition 1.1 Consolidated Reprint 3822 60669-2-1 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches - 2015 IEC 0 Edition 4.2 Consolidated Reprint 3823 61242 AMD 2 AMENDMENT 2 - Electrical accessories Cable reels for household and similar purposes - Edition 1.0 2015 IEC 0 3824 61243-3 CORR Live working Voltage detectors Part 3: Two-pole low-voltage type - Edition 3.0 2015 IEC 0 1 3825 61243-3 CORR Live working - Voltage detectors - Part 3: Two-pole low-voltage type - Edition 3.0 2015 IEC 0 2 3826 61196-9-1 Coaxial communication cables Part 9-1: Flexible RF coaxial cables Blank detail specification - Edition 1.0 2015 IEC 0 3827 61196-1-314 Coaxial communication cables - Part 1- 314: Mechanical test methods - Test for bending - Edition 2.0 2015 IEC 0 3828 61196-4 Coaxial communication cables Part 4: Sectional specification for radiating cables - Edition 3.0 2015 IEC 0 3829 61207-7 CORR Expression of performance of gas analyzers Part 7: Tuneable semiconductor laser gas analyzers - Edition 1.0 2015 IEC 0 1 3830 61196-1-114 Coaxial communication cables Part 1-114: Electrical test methods Test for inductance - Edition 1.0 2015 IEC 0 3831 61196-1-116 Coaxial communication cables Part 1-116: Electrical test methods Test for impedance with time domain reflectometry 2015 IEC 0 (TDR) - Edition 1.0 3832 61196-1-104 Coaxial communication cables - Part 1-104: Electrical test methods - Test for the stability of the capacitance of cable versus 2015 IEC 0 temperature - Edition 2.0 3833 61196-1-305 - Edition 1.0 2015 IEC 0 3834 61196-1-100 Coaxial communication cables Part 1-100: Electrical test methods General requirements - Edition 2.0 2015 IEC 0 3835 61196-1-103 Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable - Edition 2.0 2015 IEC 0 3836 61189-5-2 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General 2015 IEC 0 test methods for materials and assemblies - Soldering flux for printed board assemblies - Edition 1.0 3837 61189-5-3 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-3: General 2015 IEC 0 test methods for materials and assemblies Soldering paste for printed board assemblies - Edition 1.0 3838 61189-5-4 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-4: General 2015 IEC 0 test methods for materials and assemblies Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies - Editi 3839 61169-51 Radio-frequency connectors Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer 2015 IEC 0 type QLI) - Edition 1.0) _خ conductors 13,5 mm with bayonet lock Characteristic impedance 50 3840 61169-53 Radio-frequency connectors Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer 2015 IEC 0 Type S7-16) - Edition 1.0) _خ conductor 16 mm with screw lock Characteristic impedance 50 3841 61169-47 Radio-frequency connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, 2015 IEC 0 cable networks (type F-Quick) - Edition 2.0 _خ typically for use in 75 3842 61175-1 Industrial systems, installations and equipment and industrial products Designation of signals Part 1: Basic rules - Edition 2015 IEC 0 1.0 3843 61174 Maritime navigation and radiocommunication equipment and systems Electronic chart display and information system 2015 IEC 0 (REDLINE + (ECDIS) Operational and performance requirements, methods of testing and required test results - Edition 4.0 STANDARD 3844 61174 Maritime navigation and radiocommunication equipment and systems Electronic chart display and information system 2015 IEC 0 (ECDIS) Operational and performance requirements, methods of testing and required test results - Edition 4.0 3845 61189-2-721 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-721: Test 2015 IEC 0 methods for materials for interconnection structures Measurement of relative permittivity and loss tangent for copper clad laminat 3846 61300-3-50 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND 2015 IEC 0 CORR 1 MEASUREMENT PROCEDURES Part 3-50: Examinations and measurements Crosstalk for optical spatial switches - Edition 1.0 3847 61300-3-50 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND 2015 IEC 0 CORR 2 MEASUREMENT PROCEDURES Part 3-50: Examinations and measurements Crosstalk for optical spatial switches - Edition 1.0 3848 61300-3-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: 2015 IEC 0 Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers - Edition 2.0 3849 61300-3-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: 2015 IEC 0 (REDLINE + Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers - Edition 2.0 STA 3850 61300-2-50 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-50: Tests 2015 IEC 0 CORR 1 Fibre optic connector proof test with static load Singlemode and multimode - Edition 1.0 3851 61300-2-51 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-51: Tests 2015 IEC 0 CORR 1 Fibre optic connector test for transmission with applied tensile load Singlemode and multimode - Edition 1.0 3852 61300-3-53 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-53: 2015 IEC 0 Examinations and measurements Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode 3853 61285 Industrial-process control - Safety of analyser houses - Edition 3.0 2015 IEC 0 3854 61280-2-2 Fibre optic communication subsystem test procedures Part 2-2: Digital systems Optical eye pattern, waveform and 2015 IEC 0 CORR 1 extinction ratio measurement - Edition 4.0 3855 61251 Electrical insulating materials and systems AC voltage endurance evaluation - Edition 1.0 2015 IEC 0 3856 61290-1-1 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method - Edition 3.0 2015 IEC 0 3857 61290-1-3 Optical amplifiers Test methods Part 1-3: Power and gain parameters Optical power meter method - Edition 3.0 2015 IEC 0 3858 61290-4-3 Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power 2015 IEC 0 control - Edition 1.0 3859 61010-031 Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for 2015 IEC 0 hand-held probe assemblies for electrical measurement and test - Edition 2.0 3860 61010-2-040 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular 2015 IEC 0 requirements for sterilizers and washer-disinfectors used to treat medical materials - Edition 2.0 3861 61010-2-081 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular 2015 IEC 0 (REDLINE + requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes - Edition 2.0 ST 3862 61010-2-081 NULL 2015 IEC 0 (REDLINE) 3863 61010-2-081 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular 2015 IEC 0 requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes - Edition 2.0 3864 61010-2-061 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular 2015 IEC 0 requirements for laboratory atomic spectrometers with thermal atomization and ionization - Edition 3.0 3865 61010-2-051 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular 2015 IEC 0 requirements for laboratory equipment for mixing and stirring - Edition 3.0 3866 61000-6-5 Electromagnetic compatibility (EMC) Part 6-5: Generic standards Immunity for equipment used in power station and 2015 IEC 0 substation environment - Edition 1.0 3867 61000-4-16 Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, 2015 IEC 0 (REDLINE + common mode disturbances in the frequency range 0 Hz to 150 kHz - Edition 2.0 STA 3868 61000-4-16 Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, 2015 IEC 0 common mode disturbances in the frequency range 0 Hz to 150 kHz - Edition 2.0 3869 61000-4-16 Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, 2015 IEC 0 common mode disturbances in the frequency range 0 Hz to 150 kHz - Edition 2.0 3870 61000-4-13 AMENDMENT 2 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques Harmonics and 2015 IEC 0 AMD 2 interharmonics including mains signalling at a.c. power port, low frequency immunity tests - Edition 1.0 3871 61000-4-13 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques Harmonics and interharmonics 2015 IEC 0 including mains signalling at a.c. power port, low frequency immunity tests - Edition 1.2 Consolidated Reprint 3872 61000-4-13 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques Harmonics and interharmonics 2015 IEC 0 including mains signalling at a.c. power port, low frequency immunity tests - Edition 1.2 Consolidated Reprint 3873 61000-4-30 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement 2015 IEC 0 methods - Edition 3.0 3874 61000-4-30 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement 2015 IEC 0 (REDLINE + methods - Edition 3.0 STA 3875 61000-4-24 Electromagnetic compatibility (EMC) Part 4-24: Testing and measurement techniques Test methods for protective devices 2015 IEC 0 for HEMP conducted disturbance - Edition 2.0 3876 61010-2-101 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular 2015 IEC 0 (REDLINE + requirements for in vitro diagnostic (IVD) medical equipment - Edition 2.0 ST 3877 61010-2-101 NULL 2015 IEC 0 (REDLINE) 3878 61010-2-101 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular 2015 IEC 0 requirements for in vitro diagnostic (IVD) medical equipment - Edition 2.0 3879 61048 Auxiliaries for lamps Capacitors for use in tubular fluorescent and other discharge lamp circuits General and safety 2015 IEC 0 requirements - Edition 2.1; Consolidated Reprint 3880 61076-4-116 Connectors for electronic equipment Product requirements Part 4-116: Printed board connectors Detail specification for a 2015 IEC 0 high-speed two-part connector with integrated shielding function - Edition 1.1 Consolidated Reprint 3881 61167 Metal halide lamps Performance specification - Edition 3.0 2015 IEC 0 3882 61162-3 Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 3: Serial data instrument 2014 IEC 0 network - Edition 1.2 Consolidated Reprint 3883 61158-6-3 Industrial communication networks Fieldbus specifications Part 6-3: Application layer protocol specification Type 3 2014 IEC 0 elements - Edition 3.0 3884 61158-6-4 Industrial communication networks Fieldbus specifications Part 6-4: Application layer protocol specification Type 4 2014 IEC 0 elements - Edition 2.0 3885 61158-6-9 Industrial communication networks Fieldbus specifications Part 6-9: Application layer protocol specification Type 9 2014 IEC 0 elements - Edition 3.0 3886 61158-5-22 Industrial communication networks Fieldbus specifications Part 5-22: Application layer service definition Type 22 2014 IEC 0 elements - Edition 2.0 3887 61158-5-23 Industrial communication networks Fieldbus specifications Part 5-23: Application layer service definition Type 23 2014 IEC 0 elements - Edition 1.0 3888 61158-5-24 Industrial communication networks Fieldbus specifications Part 5-24: Application layer service definition Type-24 2014 IEC 0 elements - Edition 1.0 3889 61158-5-9 Industrial communication networks Fieldbus specifications Part 5-9: Application layer service definition Type 9 elements 2014 IEC 0 - Edition 2.0 3890 61158-6-10 Industrial communication networks Fieldbus specifications Part 6-10: Application layer protocol specification Type 10 2014 IEC 0 elements - Edition 3.0 3891 61158-5-3 Industrial communication networks Fieldbus specifications Part 5-3: Application layer service definition Type 3 elements 2014 IEC 0 - Edition 3.0 3892 61158-6-12 Industrial communication networks Fieldbus specifications Part 6-12: Application layer protocol specification Type 12 2014 IEC 0 elements - Edition 3.0 3893 61158-6-13 Industrial communication networks Fieldbus specifications Part 6-13: Application layer protocol specification Type 13 2014 IEC 0 elements - Edition 2.0 3894 61158-6-22 Industrial communication networks Fieldbus specifications Part 6-22: Application layer protocol specification Type 22 2014 IEC 0 elements - Edition 2.0 3895 61158-6-23 Industrial communication networks Fieldbus specifications Part 6-23: Application layer protocol specification Type 23 2014 IEC 0 elements - Edition 1.0 3896 61158-6-24 Industrial communication networks Fieldbus specifications Part 6-24: Application layer protocol specification Type-24 2014 IEC 0 Elements - Edition 1.0 3897 61158-6-20 Industrial communication networks Fieldbus specifications Part 6-20: Application layer protocol specification Type 20 2014 IEC 0 elements - Edition 3.0 3898 61158-6-2 Industrial communication networks Fieldbus specifications Part 6-2: Application layer protocol specification Type 2 2014 IEC 0 elements - Edition 3.0 3899 61158-6-14 Industrial communication networks Fieldbus specifications Part 6-14: Application layer protocol specification Type 14 2014 IEC 0 elements - Edition 3.0 3900 61158-6-19 Industrial communication networks Fieldbus specifications Part 6-19: Application layer protocol specification Type 19 2014 IEC 0 elements - Edition 3.0 3901 61158-2 Industrial communication networks Fieldbus specifications Part 2: Physical layer specification and service definition - 2014 IEC 0 Edition 6.0 3902 61158-3-1 Industrial communication networks Fieldbus specifications Part 3-1: Data-link layer service definition Type 1 elements - 2014 IEC 0 Edition 2.0 3903 61158-3-12 Industrial communication networks Fieldbus specifications Part 3-12: Data-link layer service definition Type 12 elements 2014 IEC 0 - Edition 3.0 3904 61158-3-13 Industrial communication networks Fieldbus specifications Part 3-13: Data-link layer service definition Type 13 elements 2014 IEC 0 - Edition 2.0 3905 61158-3-14 Industrial communication networks Fieldbus specifications Part 3-14: Data-link layer service definition Type 14 elements 2014 IEC 0 - Edition 3.0 3906 61158-3-2 Industrial communication networks Fieldbus specifications Part 3-2: Data-link layer service definition Type 2 elements - 2014 IEC 0 Edition 2.0 3907 61158-3-20 Industrial communication networks Fieldbus specifications Part 3-20: Data-link layer service definition Type 20 elements 2014 IEC 0 - Edition 1.0 3908 61158-3-22 Industrial communication networks Fieldbus specifications Part 3-22: Data-link layer service definition Type 22 elements 2014 IEC 0 - Edition 2.0 3909 61158-3-24 Industrial communication networks Fieldbus specifications Part 3-24: Data-link layer service definition Type-24 elements 2014 IEC 0 - Edition 1.0 3910 61158-3-4 Industrial communication networks Fieldbus specifications Part 3-4: Data-link layer service definition Type 4 elements - 2014 IEC 0 Edition 2.0 3911 61158-3-3 Industrial communication networks Fieldbus specifications Part 3-3: Data-link layer service definition Type 3 elements - 2014 IEC 0 Edition 2.0 3912 61158-4-12 Industrial communication networks Fieldbus specifications Part 4-12: Data-link layer protocol specification Type 12 2014 IEC 0 elements - Edition 3.0 3913 61158-4-13 Industrial communication networks Fieldbus specifications Part 4-13: Data-link layer protocol specification Type 13 2014 IEC 0 elements - Edition 2.0 3914 61158-4-1 Industrial communication networks Fieldbus specifications Part 4-1: Data-link layer protocol specification Type 1 2014 IEC 0 elements - Edition 2.0 3915 61158-4-2 Industrial communication networks Fieldbus specifications Part 4-2: Data-link layer protocol specification Type 2 2014 IEC 0 elements - Edition 3.0 3916 61158-4-20 Industrial communication networks Fieldbus specifications Part 4-20: Data-link layer protocol specification Type 20 2014 IEC 0 elements - Edition 1.0 3917 61158-4-14 Industrial communication networks Fieldbus specifications Part 4-14: Data-link layer protocol specification Type 14 2014 IEC 0 elements - Edition 3.0 3918 61158-4-19 Industrial communication networks Fieldbus specifications Part 4-19: Data-link layer protocol specification Type 19 2014 IEC 0 elements - Edition 3.0 3919 61158-4-22 Industrial communication networks Fieldbus specifications Part 4-22: Data-link layer protocol specification Type 22 2014 IEC 0 elements - Edition 2.0 3920 61158-4-24 Industrial communication networks Fieldbus specifications Part 4-24: Data-link layer protocol specification Type 24 2014 IEC 0 elements - Edition 1.0 3921 61158-4-3 Industrial communication networks Fieldbus specifications Part 4-3: Data-link layer protocol specification Type 3 2014 IEC 0 elements - Edition 3.0 3922 61158-4-4 Industrial communication networks Fieldbus specifications Part 4-4: Data-link layer protocol specification Type 4 2014 IEC 0 elements - Edition 2.0 3923 61158-5-10 Industrial communication networks Fieldbus specifications Part 5-10: Application layer service definition Type 10 2014 IEC 0 elements - Edition 3.0 3924 61158-4-7 Industrial communication networks Fieldbus specifications Part 4-7: Data-link layer protocol specification Type 7 2014 IEC 0 CORR 1 elements - Edition 1.0 3925 61158-5-12 Industrial communication networks Fieldbus specifications Part 5-12: Application layer service definition Type 12 2014 IEC 0 elements - Edition 3.0 3926 61158-5-13 Industrial communication networks Fieldbus specifications Part 5-13: Application layer service definition Type 13 2014 IEC 0 elements - Edition 2.0 3927 61158-5-20 Industrial communication networks Fieldbus specifications Part 5-20: Application layer service definition Type 20 2014 IEC 0 elements - Edition 3.0 3928 61158-5-14 Industrial communication networks Fieldbus specifications Part 5-14: Application layer service definition Type 14 2014 IEC 0 elements - Edition 3.0 3929 61158-5-2 Industrial communication networks Fieldbus specifications Part 5-2: Application layer service definition Type 2 elements 2014 IEC 0 - Edition 3.0 3930 61158-1 Industrial communication networks Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 2014 IEC 0 61784 series - Edition 1.0 3931 61082-1 NULL 2014 IEC 0 (REDLINE) 3932 61082-1 Preparation of documents used in electrotechnology - Part 1: Rules - Edition 3.0 2014 IEC 0 3933 61076-2-109 Connectors for electronic equipment Product requirements Part 2-109: Circular connectors Detail specification for 2014 IEC 0 screw-locking, for data transmission frequencies up to 500 MHz - Edition 1.0 1 _أ connectors with M 12 3934 61076-2-104 Connectors for electronic equipment Product requirements Part 2-104: Circular connectors Detail specification for 2014 IEC 0 circular connectors with M8 screw-locking or snap-locking - Edition 2.0 3935 61000-4-19 Electromagnetic compatibility (EMC) Part 4-19: Testing and measurement techniques Test for immunity to conducted, 2014 IEC 0 differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports - Edition 1.0 3936 61000-4-5(2 NULL 2014 IEC 0 3937 61000-4-5 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test - Edition 3.0 2014 IEC 0 3938 61000-4-36 Electromagnetic compatibility (EMC) Part 4-36: Testing and measurement techniques IEMI immunity test methods for 2014 IEC 0 equipment and systems - Edition 1.0 3939 61000-2-4 Electromagnetic compatibility (EMC) Part 2-4: Environment Compatibility levels in industrial plants for low-frequency 2014 IEC 0 CORR 1 conducted disturbances - Edition 2.0 3940 61000-3-2(2 NULL 2014 IEC 0 3941 61000-3-2 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 2014 IEC 0 â_¤ 16 A per phase) - Edition 4.0 3942 61008-1 AMD AMENDMENT 2 Residual current operated circuit-breakers without integral overcurrent protection for household and 2014 IEC 0 2 CORR 1 similar uses (RCCBs) Part 1: General rules - Edition 3.2 3943 61005 Radiation protection instrumentation Neutron ambient dose equivalent (rate) meters - Edition 3.0 2014 IEC 0 3944 61000-6-7 Electromagnetic compatibility (EMC) Part 6-7: Generic standards Immunity requirements for equipment intended to 2014 IEC 0 perform functions in a safety-related system (functional safety) in industrial locations - Edition 1.0 3945 61010-2-010 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular 2014 IEC 0 requirements for laboratory equipment for the heating of materials - Edition 3.0 3946 61287-1 Railway applications Power converters installed on board rolling stock Part 1: Characteristics and test methods - Edition 2014 IEC 0 3.0 3947 61290-10-5 Optical amplifiers Test methods Part 10-5: Multichannel parameters Distributed Raman amplifier gain and noise figure - 2014 IEC 0 Edition 1.0 3948 61300-2-35 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-35: Tests 2014 IEC 0 Cable nutation - Edition 2.0 3949 61260-1 Electroacoustics Octave-band and fractional-octave-band filters Part 1: Specifications - Edition 1.0 2014 IEC 0 3950 61255 Household electric heating pads Methods for measuring performance - Edition 2.0 2014 IEC 0 3951 61280-2-12 Fibre optic communication subsystem test procedures Part 2-12: Digital systems Measuring eye diagrams and Q-factor 2014 IEC 0 using a software triggering technique for transmission signal quality assessment - Edition 1.0 3952 61280-4-2 Fibre Optic Communication Subsystem Basic Test Procedures - Part 4-2: Installed cable plant Single-mode attenuation and 2014 IEC 0 optical return loss measurement - Edition 2.0 3953 61331-1(2 NULL 2014 IEC 0 3954 61331-1 Protective devices against diagnostic medical X-radiation Part 1: Determination of attenuation properties of materials - 2014 IEC 0 Edition 2.0 3955 61331-3(2 NULL 2014 IEC 0 3956 61331-3 Protective devices against diagnostic medical X-radiation Part 3: Protective clothing, eyewear and protective patient 2014 IEC 0 shields - Edition 2.0 3957 61331-2(2 NULL 2014 IEC 0 3958 61331-2 Protective devices against diagnostic medical X-radiation Part 2: Translucent protective plates - Edition 2.0 2014 IEC 0 3959 61300-3-47 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-47: 2014 IEC 0 Examinations and measurements End face geometry of PC/APC spherically polished ferrules using interferometry - Edition 1.0 3960 61300-3-51 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-51: 2014 IEC 0 Examinations and measurements Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors - Edition 1.0 3961 61300-3-52 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-52: 2014 IEC 0 Examinations and measurements Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibr 3962 61300-3-14 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-14: 2014 IEC 0 Examinations and measurements Error and repeatability of the attenuation settings of a variable optical attenuator - Edition 3.0 3963 61300-2-43 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-43: Tests 2014 IEC 0 Screen testing of return loss of single-mode PC optical fibre connectors - Edition 2.0 3964 61300-2-42(2 NULL 2014 IEC 0 3965 61300-3-21(2 NULL 2014 IEC 0 3966 61300-3-29(2 NULL 2014 IEC 0 3967 61169-45 Radio-frequency connectors Part 45: Sectional specification for SQMA series quick lock RF coaxial connectors - Edition 2014 IEC 0 1.0 3968 61169-48 Radio-frequency connectors Part 48: Sectional specification for series BMP R.F. coaxial connectors - Edition 1.0 2014 IEC 0 3969 61169-49 Radio-frequency connectors Part 49: Sectional specification for SMAA series R.F connectors - Edition 1.0 2014 IEC 0 3970 61169-50 Radio-frequency connectors Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer 2014 IEC 0 type QMA) - Edition 1.0) _خ conductors 4,11 mm with quick lock system Characteristic impedance 50 3971 61190-1-2(2 NULL 2014 IEC 0 3972 61195 Double-capped fluorescent lamps Safety specifications - Edition 2.2 Consolidated Reprint 2014 IEC 0 3973 61196-10 Coaxial communication cables Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) 2014 IEC 0 dielectric - Edition 1.0 3974 61196-10-1 Coaxial communication cables Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene 2014 IEC 0 (PTFE) dielectric - Edition 1.0 3975 61196-1-200 Coaxial communication cables Part 1-200: Environmental test methods General requirements - Edition 2.0 2014 IEC 0 3976 61196-1-111 Coaxial communication cables Part 1-111: Electrical test methods Stability of phase test methods - Edition 2.0 2014 IEC 0 3977 61207-6 Expression of performance of gas analyzers Part 6: Photometric analyzers - Edition 2.0 2014 IEC 0 3978 61199 Single-capped fluorescent lamps Safety specifications - Edition 3.2 Consolidated Reprint 2014 IEC 0 3979 61196-9 Coaxial communication cables Part 9: Sectional specification for RF flexible cables - Edition 1.0 2014 IEC 0 3980 61243-3 Live working Voltage detectors Part 3: Two-pole low-voltage type - Edition 3.0 2014 IEC 0 3981 60684-3-284 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 284: Heat-shrinkable sleevings, 2014 IEC 0 for oil barrier applications - Edition 1.0 3982 60684-3-285 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin 2014 IEC 0 sleeving, for medium voltage joint insulation - Edition 1.0 3983 60704-2-5 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: 2014 IEC 0 Particular requirements for electric thermal storage room heaters - Edition 2.1 Consolidated Reprint 3984 60705 AMD 1 NULL 2014 IEC 0 3985 60705 Household microwave ovens Methods for measuring performance - Edition 4.1 Consolidated Reprint 2014 IEC 0 3986 60728-1-2(2 NULL 2014 IEC 0 3987 60728-14 Cable networks for television signals, sound signals and interactive services Part 14: Optical transmission systems using 2014 IEC 0 RFoG technology - Edition 1.0 3988 60728-1-1(2 NULL 2014 IEC 0 3989 60728-1(2 NULL 2014 IEC 0 3990 60728-1 Cable networks for television signals, sound signals and interactive services Part 1: System performance of forward paths - 2014 IEC 0 Edition 5.0 3991 60728-10(2 NULL 2014 IEC 0 3992 60721-2-9 Classification of environmental conditions Part 2-9: Environmental conditions appearing in nature Measured shock and 2014 IEC 0 vibration data Storage, transportation and in-use - Edition 1.0 3993 60704-2-1(2 NULL 2014 IEC 0 3994 60704-2-1 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-1: 2014 IEC 0 Particular requirements for vacuum cleaners - Edition 3.0 3995 60695-9-2 Fire hazard testing Part 9-2: Surface spread of flame Summary and relevance of test methods - Edition 1.0 2014 IEC 0 3996 60695-1-11 Fire hazard testing Part 1-11: Guidance for assessing the fire hazard of electrotechnical products Fire hazard assessment - 2014 IEC 0 Edition 2.0 3997 60695-10-2(2 NULL 2014 IEC 0 3998 60695-11-10 Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods - Edition 2.0 2014 IEC 0 CORR 1 3999 60695-2-12(2 NULL 2014 IEC 0 4000 60695-2-11(2 NULL 2014 IEC 0 4001 60793-1-50 Optical fibres Part 1-50: Measurement methods and test procedures Damp heat (steady state) tests - Edition 2.0 2014 IEC 0 4002 60793-1-52(2 NULL 2014 IEC 0 4003 60793-1-51(2 NULL 2014 IEC 0 4004 60793-1-20 Optical fibres Part 1-20: Measurement methods and test procedures Fibre geometry - Edition 2.0 2014 IEC 0 4005 60770-3(2 NULL 2014 IEC 0 4006 60770-3 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent 2014 IEC 0 transmitters - Edition 2.0 4007 60749-42 Semiconductor devices Mechanical and climatic test methods Part 42: Temperature and humidity storage - Edition 1.0 2014 IEC 0 4008 60730-1 CORR NULL 2014 IEC 0 1 4009 60730-2-22 Automatic electrical controls Part 2-22: Particular requirements for thermal motor protectors - Edition 1.0 2014 IEC 0 4010 60884-1 AMD Plugs and socket-outlets for household and similar purposes Part 1: General requirements - Edition 3.2 2014 IEC 0 2 CORR 1 4011 60876-1 Fibre optic interconnecting devices and passive components Fibre optic spatial switches Part 1: Generic specification - 2014 IEC 0 Edition 5.0 4012 60871-4(2 NULL 2014 IEC 0 4013 60893-3-4 CORRIGENDUM 1 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical 2014 IEC 0 CORR 1 purposes Part 3-4: Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins - Edition 2.1 4014 60901 AMD 6 AMENDMENT 6 Single-capped fluorescent lamps Performance specifications - Edition 2.0 2014 IEC 0 4015 60903 Live working Electrical insulating gloves - Edition 3.0 2014 IEC 0 4016 60904-8(2 NULL 2014 IEC 0 4017 60904-8 Photovoltaic devices Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device - Edition 3.0 2014 IEC 0 4018 60947-1 Low-voltage switchgear and controlgear Part 1: General rules - Edition 5.2 Consolidated Reprint 2014 IEC 0 4019 60958-1(2 NULL 2014 IEC 0 4020 60947-4-3(2 NULL 2014 IEC 0 4021 60947-4-3 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters AC semiconductor controllers and 2014 IEC 0 contactors for non-motor loads - Edition 2.0 4022 60984 Live working Electrical insulating sleeves - Edition 2.0 2014 IEC 0 4023 60974-10(2 NULL 2014 IEC 0 4024 60850 Railway applications Supply voltages of traction systems - Edition 4.0 2014 IEC 0 4025 60860 Radiation protection instrumentation Warning equipment for criticality accidents - Edition 2.0 2014 IEC 0 4026 60871-1(2 NULL 2014 IEC 0 4027 60871-1 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V Part 1: General - Edition 4.0 2014 IEC 0 4028 60870-6-802 Telecontrol equipment and systems Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T 2014 IEC 0 recommendations TASE.2 Object models - Edition 3.0 4029 60870-6-503 Telecontrol equipment and systems Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T 2014 IEC 0 recommendations TASE.2 Services and protocol - Edition 3.0 4030 60870-6-702 Telecontrol equipment and systems Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T 2014 IEC 0 recommendations Functional profile for providing the TASE.2 application service in end systems - Edition 2.0 4031 60839-11-2 Alarm and electronic security systems Part 11-2: Electronic access control systems Application guidelines - Edition 1.0 2014 IEC 0 4032 60839-5-1 Alarm and electronic security systems Part 5-1: Alarm transmission systems General requirements - Edition 2.0 2014 IEC 0 4033 60831-1 NULL 2014 IEC 0 (REDLINE) 4034 60831-1 CORR Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 1: 2014 IEC 0 1 General Performance, testing and rating Safety requirements Guide for installation and operation - Edition 3.0 4035 60831-2(2 NULL 2014 IEC 0 4036 60825-1(2 NULL 2014 IEC 0 4037 60825-1 Safety of laser products Part 1: Equipment classification and requirements - Edition 3.0 2014 IEC 0 4038 60794-1-20 NULL 2014 IEC 0 4039 60794-1-24 Optical fibre cables Part 1-24: Generic specification Basic optical cable test procedures Electrical test methods - Edition 2014 IEC 0 1.0 4040 60794-2-51 Optical fibre cables Part 2-51: Indoor cables Detail specification for simplex and duplex cables for use in cords for 2014 IEC 0 controlled environment - Edition 1.0 4041 60794-3 Optical fibre cables Part 3: Outdoor cables Sectional specification - Edition 4.0 2014 IEC 0 4042 60810 Lamps for road vehicles Performance requirements - Edition 4.1 Consolidated Reprint 2014 IEC 0 4043 60809 Lamps for road vehicles Dimensional, electrical and luminous requirements - Edition 3.0 2014 IEC 0 4044 60794-4-10 Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines - Edition 2014 IEC 0 2.0 4045 60794-5 Optical fibre cables Part 5: Sectional specification Microduct cabling for installation by blowing - Edition 2.0 2014 IEC 0 4046 60794-5-10 Optical fibre cables Part 510: Family specification Outdoor microduct optical fibre cables, microducts and protected 2014 IEC 0 microducts for installation by blowing - Edition 1.0 4047 60794-5-20 Optical fibre cables Part 5-20: Family specification Outdoor microduct fibre units, microducts and protected microducts 2014 IEC 0 for installation by blowing - Edition 1.0 4048 60255-121 Measuring relays and protection equipment Part 121: Functional requirements for distance protection - Edition 1.0 2014 IEC 0 4049 60214-1(2 NULL 2014 IEC 0 4050 60214-1 Tap-changers Part 1: Performance requirements and test methods - Edition 2.0 2014 IEC 0 4051 60300-1(2 NULL 2014 IEC 0 4052 60300-1 Dependability management Part 1: Guidance for management and application - Edition 3.0 2014 IEC 0 4053 60299 Household electric blankets methods for measuring performance - Edition 3.0 2014 IEC 0 4054 60297-3-108 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2014 IEC 0 3-108: Dimensions of R-type subracks and plug-in units - Edition 1.0 4055 60309-1 AMD Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements - Edition 4.2 2014 IEC 0 1 CORR 1 4056 60269-1 Low-voltage fuses Part 1: General requirements - Edition 4.2 Consolidated Reprint 2014 IEC 0 4057 60287-1-1 Electric cables Calculation of the current rating Part 1-1: Current rating equations (100 % load factor) and calculation of 2014 IEC 0 losses General - Edition 2.1 Consolidated Reprint 4058 60282-1 AMENDMENT 1 High-voltage fuses Part 1: Current-limiting fuses - Edition 7.1 Consolidated Reprint 2014 IEC 0 4059 60099-4 Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systems - Edition 3.0 2014 IEC 0 4060 60099-9 Surge arresters Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations - Edition 1.0 2014 IEC 0 4061 60092-507 Electrical installations in ships Part 507: Small vessels - Edition 3.0 2014 IEC 0 4062 60115-8-1 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low 2014 IEC 0 power film resistors for general electronic equipment, classification level G - Edition 2.0 4063 60115-2(2 NULL 2014 IEC 0 4064 60115-2 Fixed resistors for use in electronic equipment Part 2: Sectional specification: Leaded fixed low power film resistors - 2014 IEC 0 Edition 3.0 4065 60127-6 Miniature fuses Part 6: Fuse-holders for miniature fuse-links - Edition 2.0 2014 IEC 0 4066 60127-2 Miniature fuses Part 2: Cartridge fuse-links - Edition 3.0 2014 IEC 0 4067 60118-4 Electroacoustics Hearing aids Part 4: Induction-loop systems for hearing aid purposes System performance requirements - 2014 IEC 0 Edition 3.0 4068 60068-2-75 Environmental testing Part 2-75: Tests Test Eh: Hammer tests - Edition 2.0 2014 IEC 0 4069 60071-5 Insulation co-ordination Part 5: Procedures for high-voltage direct current (HVDC) converter stations - Edition 1.0 2014 IEC 0 4070 60079-0 INT 2 NULL 2014 IEC 0 4071 60065 Audio, video and similar electronic apparatus Safety requirements - Edition 8.0 2014 IEC 0 4072 60079-18 Explosive atmospheres - Part 18: Equipment protection by encapsulation â__mâ__ - Edition 4.0 2014 IEC 0 4073 60079-18 NULL 2014 IEC 0 (REDLINE) 4074 60079-1 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures â__dâ__ - Edition 7.0 2014 IEC 0 4075 60079-11 INT 1 EXPLOSIVE ATMOSPHERES Part 11: Equipment protection by intrinsic safety "i" INTERPRETATION SHEET 1 - 2014 IEC 0 Edition 6.0 4076 60079-29-3 Explosive atmospheres Part 29-3: Gas detectors Guidance on functional safety of fixed gas detection systems - Edition 1.0 2014 IEC 0 Edition 6.0 2014 IEC 0 - «آp»آ Explosive atmospheres Part 2: Equipment protection by pressurized enclosure 60079-2 4077 4078 60079-28 INT 1 NULL 2014 IEC 0 4079 60079-26 Explosive atmospheres Part 26: Equipment with Equipment Protection Level (EPL) Ga - Edition 3.0 2014 IEC 0 4080 60079-26 NULL 2014 IEC 0 (REDLINE) 4081 60092-360 Electrical installations in ships Part 360: Insulating and sheathing materials for shipboard and offshore units, power, 2014 IEC 0 control, instrumentation and telecommunication cables - Edition 1.0 4082 60092-354 Electrical installations in ships Part 354: Single- and three-core power cables with extruded solid insulation for rated 2014 IEC 0 voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) - Edition 3.0 4083 60092-350 Electrical installations in ships Part 350: General construction and test methods of power, control and instrumentation 2014 IEC 0 cables for shipboard and offshore applications - Edition 4.0 4084 60086-4 Primary batteries Part 4: Safety of lithium batteries - Edition 4.0 2014 IEC 0 4085 60050-151 AMENDMENT 2 International Electrotechnical Vocabulary Part 151: Electrical and magnetic devices - Edition 2.0 2014 IEC 0 AMD 2 4086 60050-161 Amendment 1 International Electrotechnical Vocabulary Chapter 161: Electromagnetic Compatibility - Edition 1.0 2014 IEC 0 AMD 1 4087 60050-161 AMENDMENT 4 International Electrotechnical Vocabulary Part 161: Electromagnetic compatibility - Edition 1.0 2014 IEC 0 AMD 4 4088 60050-114 International electrotechnical vocabulary Part 114: Electrochemistry - Edition 1.0 2014 IEC 0 4089 60050-113 AMENDMENT 1 International Electrotechnical Vocabulary Part 113: Physics for electrotechnology - Edition 1.0 2014 IEC 0 AMD 1 4090 60050-395 International Electrotechnical Vocabulary Part 395: Nuclear instrumentation: Physical phenomena, basic concepts, 2014 IEC 0 instruments, systems, equipment and detectors - Edition 1.0 4091 60034-30-1 Rotating electrical machines Part 30-1: Efficiency classes of line operated AC motors (IE code) - Edition 1.0 2014 IEC 0 4092 60034-2-1 Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding 2014 IEC 0 machines for traction vehicles) - Edition 2.0 4093 60034-26 Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction 2014 IEC 0 CORR 1 motors - Edition 1.0 4094 60034-8(2 NULL 2014 IEC 0 4095 60034-18-41 Rotating electrical machines Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating 2014 IEC 0 electrical machines fed from voltage converters Qualification and quality control tests - Edition 1.0 4096 60034-19 Rotating electrical machines Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies - 2014 IEC 0 Edition 2.0 4097 60050-903 AMENDMENT 1 International Electrotechnical Vocabulary Part 903: Risk assessment - Edition 1.0 2014 IEC 0 AMD 1 4098 60050-732 AMENDMENT 1 International Electrotechnical Vocabulary Part 732: Computer network technology - Edition 1.0 2014 IEC 0 AMD 1 4099 60050-651(2 NULL 2014 IEC 0 4100 60050-561 International electrotechnical vocabulary Part 561: Piezoelectric, dielectric and electrostatic devices and associated 2014 IEC 0 materials for frequency control, selection and detection - Edition 2.0 IEC 0 2014 _أcurit_أet de la s _أle de l'interchangeabilit_أAMD Amendement 48 Culots de lampes et douilles ainsi que calibres pour le contr 60061-3 4101 48 Partie 3: Calibres - Edition 3.44 4102 60061-3 AMD Amendment 49 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2014 IEC 0 49 - Edition 3.44 4103 60061-2 AMD Amendment 48 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2014 IEC 0 48 Lampholders - Edition 3.32 4104 60061-1 AMD Amendment 50 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2014 IEC 0 50 caps - Edition 3.35 4105 60061-1 AMD Amendment 51 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2014 IEC 0 51 caps - Edition 3.35 4106 60050-881 AMENDMENT 1 International Electrotechnical Vocabulary Part 881: Radiology and radiological physics - Edition 1.0 2014 IEC 0 AMD 1 4107 60335-2-101 Household and similar electrical appliances Safety Part 2-101: Particular requirements for vaporizers - Edition 1.2 2014 IEC 0 Consolidated Reprint 4108 60335-1 CORR NULL 2014 IEC 0 1(2 4109 60320-3 Appliance couplers for household and similar general purposes Part 3: Standard sheets and gauges - Edition 1.0 2014 IEC 0 4110 60318-3 Electroacoustics Simulators of human head and ear Part 3: Acoustic coupler for the calibration of supra-aural earphones 2014 IEC 0 used in audiometry - Edition 2.0 4111 60317-51(2 NULL 2014 IEC 0 4112 60317-53(2 NULL 2014 IEC 0 4113 60335-2-25 Household and similar electrical appliances Safety Part 2-25: Particular requirements for microwave ovens, including 2014 IEC 0 combination microwave ovens - Edition 6.2 4114 60335-2-30 NULL 2014 IEC 0 CORR 1 4115 60335-2-90 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens - 2014 IEC 0 Edition 4.0 4116 60335-2-6(2 NULL 2014 IEC 0 4117 60335-2-56 Household and similar electrical appliances Safety Part 2-56: Particular requirements for projectors and similar appliances 2014 IEC 0 - Edition 3.2 Consolidated Reprint 4118 60417 Database Snapshot - Graphical symbols for use on equipment 2014 IEC 0 DATABASE SNAPSHOTS 4119 60412 Nuclear instrumentation Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions 2014 IEC 0 of scintillators - Edition 3.0 4120 60400 Lampholders for tubular fluorescent lamps and starterholders - Edition 7.2 Consolidated Reprint 2014 IEC 0 4121 60364-8-1 Low-voltage electrical installations Part 8-1: Energy efficiency - Edition 1.0 2014 IEC 0 4122 60352-5 CORR SOLDERLESS CONNECTIONS Part 5: Press-in connections General requirements, test methods and practical guidance 2014 IEC 0 1 - Edition 4.0 4123 60364-4-42 Low-voltage electrical installations Part 4-42: Protection for safety Protection against thermal effects - Edition 3.1 2014 IEC 0 Consolidated Reprint 4124 60502-2 NULL 2014 IEC 0 (REDLINE) 4125 60502-2(2 NULL 2014 IEC 0 4126 60464-3-2(2 NULL 2014 IEC 0 4127 60464-3-2 Varnishes used for electrical insulation Part 3: Specifications for individual materials Sheet 2: Hot curing impregnating 2014 IEC 0 varnishes - Edition 2.1 Consolidated Reprint 4128 60464-3-1(2 NULL 2014 IEC 0 4129 60464-3-1 Varnishes used for electrical insulation Part 3: Specifications for individual materials Sheet 1: Ambient curing finishing 2014 IEC 0 varnishes - Edition 2.1 Consolidated Reprint 4130 60601-2-64 Medical electrical equipment Part 2-64: Particular requirements for the basic safety and essential performance of light ion 2014 IEC 0 beam medical electrical equipment - Edition 1.0 4131 60617 Graphical symbols for diagrams 2014 IEC 0 DATABASE SNAPSHOTS 4132 60601-2-68 Medical electrical equipment Part 2-68: Particular requirements for the basic safety and essential performance of X-ray- 2014 IEC 0 based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam t 4133 60630 AMD 7 AMENDMENT 7 Maximum lamp outlines for incandescent lamps - Edition 2.0 2014 IEC 0 4134 60601-2-2 NULL 2014 IEC 0 CORR 1 4135 60601-1-2(2 NULL 2014 IEC 0 4136 60601-2-1 Medical electrical equipment Part 2-1: Particular requirements for the basic safety and essential performance of electron 2014 IEC 0 accelerators in the range 1 MeV to 50 MeV - Edition 3.1 Consolidated Reprint 4137 60601-2-36(2 NULL 2014 IEC 0 4138 60598-1(2 NULL 2014 IEC 0 4139 60598-1 Luminaires Part 1: General requirements and tests - Edition 8.0 2014 IEC 0 4140 60598-2-22 Luminaires Part 2-22: Particular requirements Luminaires for emergency lighting - Edition 4.0 2014 IEC 0 4141 60598-2-20 Luminaires Part 2-20: Particular requirements Lighting chains - Edition 4.0 2014 IEC 0 4142 60601-1-12 Medical electrical equipment Part 1-12: General requirements for basic safety and essential performance Collateral 2014 IEC 0 Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services 4143 60601-1 AMD NULL 2014 IEC 0 1 CORR 1 4144 TS 62282-7-2 Fuel cell technologies Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells (SOFC) - 2014 IEC 0 Edition 1.0 4145 TS 62332-2 Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Part 2: Simplified test - 2014 IEC 0 Edition 1.0 4146 TS 62325-503 Framework for energy market communications Part 503: Market data exchanges guidelines for the IEC 62325-351 profile 2014 IEC 0 - Edition 1.0 4147 TS 62556 Ultrasonics Field characterization Specification and measurement of field parameters for high intensity therapeutic 2014 IEC 0 ultrasound (HITU) transducers and systems - Edition 1.0 4148 TS 62657-1 Industrial communication networks Wireless communication networks Part 1: Wireless communication requirements and 2014 IEC 0 spectrum considerations - Edition 1.0 4149 TS 62700 DC power supply for notebook computers - Edition 1.0 2014 IEC 0 4150 TS 62668-1 Process management for avionics Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled 2014 IEC 0 electronic components - Edition 3.0 4151 TS 62668-2 Process management for avionics Counterfeit prevention Part 2: Managing electronic components from non-franchised 2014 IEC 0 sources - Edition 2.0 4152 TS 62789 Photovoltaic concentrator cell documentation - Edition 1.0 2014 IEC 0 4153 TS 62773 Railway applications Procedure to determine the performance requirements for radio systems applied to radio-based train 2014 IEC 0 control systems - Edition 1.0 4154 TS 62647-3 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 3: 2014 IEC 0 Performance testing for systems containing lead-free solder and finishes - Edition 1.0 4155 TS 62603-1 Industrial process control systems Guideline for evaluating process control systems Part 1: Specifications - Edition 1.0 2014 IEC 0 4156 TS 62607-5-1 Nanomanufacturing Key control characteristics Part 5-1: Thin-film organic/nano electronic devices Carrier transport 2014 IEC 0 measurements - Edition 1.0 4157 TS 62607-4-1 Nanomanufacturing Key control characteristics Part 4-1: Cathode nanomaterials for nano-enabled electrical energy 2014 IEC 0 storage Electrochemical characterisation, 2-electrode cell method - Edition 2.0 4158 TR 62627-06 Fibre optic interconnecting devices and passive components Part 06: Mechanical design proving nutation test results for 2014 IEC 0 reinforced fibre cable terminated with optical connectors for high density patching applications - Edition 1.0 4159 TR 62681 Electromagnetic performance of high voltage direct current (HVDC) overhead transmission lines - Edition 1.0 2014 IEC 0 4160 TR 62907 Use cases related to ambient assisted living (AAL) in the field of audio, video and multimedia systems and equipment - 2014 IEC 0 Edition 1.0 4161 TR 62914 Secondary cells and batteries containing alkaline or other non-acid electrolytes Experimental procedure for the forced 2014 IEC 0 internal short-circuit test of IEC 62133:2012 - Edition 1.0 4162 TR 62918 Nuclear power plants Instrumentation and control important to safety Use and selection of wireless devices to be 2014 IEC 0 integrated in systems important to safety - Edition 1.0 4163 TR 62726 Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and 2014 IEC 0 systems - Edition 1.0 4164 TR 62839-1 Environmental declaration Part 1: Wires, cables and accessory products Specific rules - Edition 1.0 2014 IEC 0 4165 TR 62854 Sharp edge testing apparatus and test procedure for lighting equipment Tests for sharpness of edge - Edition 1.0 2014 IEC 0 4166 TR 62865 Multimedia home server systems - Relationship between the content usage contract and the digital rights permission code - 2014 IEC 0 Edition 1.0 4167 TR 62866 Electrochemical migration in printed wiring boards and assemblies Mechanisms and testing - Edition 1.0 2014 IEC 0 4168 TR 80001-2-5 Application of risk management for IT-networks incorporating medical devices Part 2-5: Application guidance Guidance 2014 IEC 0 on distributed alarm systems - Edition 1.0 4169 TR 80002-3 Medical device software Part 3: Process reference model of medical device software life cycle processes (IEC 62304) - 2014 IEC 0 Edition 1.0 4170 TR 62690 Hydrogen effects in optical fibre cables Guidelines - Edition 1.0 2014 IEC 0 4171 TS 60034-25 Rotating electrical machines Part 25: AC electrical machines used in power drive systems Application guide - Edition 3.0 2014 IEC 0 4172 TS 60871-2 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V Part 2: Endurance testing - Edition 3.0 2014 IEC 0 4173 TS 61244-2 Determination of long-term radiation ageing in polymers Part 2: Procedures for predicting ageing at low dose rates - 2014 IEC 0 Edition 2.0 4174 TS 61244-1 Determination of long-term radiation ageing in polymers Part 1: Techniques for monitoring diffusion-limited oxidation - 2014 IEC 0 Edition 2.0 4175 TS 61400-26-2 Wind turbines Part 26-2: Production-based availability for wind turbines - Edition 1.0 2014 IEC 0 4176 TS 61439-7 Low-voltage switchgear and controlgear assemblies Part 7: Assemblies for specific applications such as marinas, camping 2014 IEC 0 sites, market squares, electric vehicles charging stations - Edition 1.0 4177 TS 61496-4-2 Safety of machinery Electro-sensitive protective equipment Part 4-2: Particular requirements for equipment using vision 2014 IEC 0 based protective devices (VBPD) Additional requirements when using reference pattern techniques (VBPDPP) - Edition 1.0 4178 TS 62129-3 Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical 2014 IEC 0 frequency combs - Edition 1.0 4179 TS 62132-9 Integrated circuits Measurement of electromagnetic immunity Part 9: Measurement of radiated immunity Surface scan 2014 IEC 0 method - Edition 1.0 4180 TS 61967-3 Integrated circuits Measurement of electromagnetic emissions Part 3: Measurement of radiated emissions Surface scan 2014 IEC 0 method - Edition 2.0 4181 TR 62343-6-5 Dynamic modules Part 6-5: Design guide Investigation of operating mechanical shock and vibration tests for dynamic 2014 IEC 0 modules - Edition 2.0 4182 TR 62354 General testing procedures for medical electrical equipment - Edition 3.0 2014 IEC 0 4183 TR 62349(2 NULL 2014 IEC 0 4184 TR 62511 Guidelines for the design of interconnected power systems - Edition 1.0 2014 IEC 0 4185 TR 61869-102 Instrument transformers Part 102: Ferroresonance oscillations in substations with inductive voltage transformers - Edition 2014 IEC 0 1.0 4186 TR 61916 Electrical accessories Harmonization of general rules - Edition 4.0 2014 IEC 0 4187 TR 62048(2 NULL 2014 IEC 0 4188 TR 61292-4 Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, 2014 IEC 0 including Raman amplifiers - Edition 3.0 4189 TR 61282-13 Fibre optic communication system design guides Part 13: Guidance on in-service PMD and CD characterization of fibre 2014 IEC 0 optic links - Edition 1.0 4190 TR 61788-20 Superconductivity Part 20: Superconducting wires Categories of practical superconducting wires General characteristics 2014 IEC 0 and guidance - Edition 1.0 4191 TR 61641 Enclosed low-voltage switchgear and controlgear assemblies Guide for testing under conditions of arcing due to internal 2014 IEC 0 fault - Edition 3.0 4192 TR 61375-2-7 Electronic railway equipment Train communication network (TCN) Part 2-7: Wireless Train Backbone (WLTB) - Edition 2014 IEC 0 1.0 4193 TR 61156-1-2 Multicore and symmetrical pair/quad cables for digital communications Part 1-2: Electrical transmission characteristics 2014 IEC 0 and test methods of symmetrical pair/quad cables - Edition 1.1 Consolidated Reprint 4194 TR 60893-4 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical 2014 IEC 0 values - Edition 2.0 4195 TR 60890(2 NULL 2014 IEC 0 4196 TR 60890 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation - Edition 2014 IEC 0 2.0 4197 TR 61000-1-6 Electromagnetic compatibility (EMC) - Part 1-6: General Guide to the assessment of measurement uncertainty - Edition 2014 IEC 0 CORR 1 1.0 4198 TR 60269-5(2 NULL 2014 IEC 0 4199 PAS 61182-12 Generic requirements for printed board assembly products manufacturing description data and transfer methodology - 2014 IEC 0 Edition 1.0 4200 PAS 61249-8-1 Qualification and performance of electrical insulating compound for printed wiring assemblies - Edition 1.0 2014 IEC 0 4201 PAS 61249-8-5 Qualification and performance specification of permanent solder mask and flexible cover materials - Edition 1.0 2014 IEC 0 4202 PAS 80005-3 Utility connections in port Part 3: Low Voltage Shore Connection (LVSC) Systems General requirements - Edition 1.0 2014 IEC 0 4203 TR 60068-3-12 Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder 2014 IEC 0 reflow temperature profile - Edition 2.0 4204 PAS 62883 The universAAL framework for user interaction in multimedia AAL spaces - Edition 1.0 2014 IEC 0 4205 IECQ 03-5(2 NULL 2014 IEC 0 4206 IECQ 03-5 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Prodecure Part 5: IECQ HSPM 2014 IEC 0 Scheme Hazardous Substance Process Management Requirements - Edition 4.0 4207 IECQ-CS NULL 2014 IEC 0 033200- TW0001 4208 IECRE 01 IEC System for Certification to Standards relating to Equipment for use in Renewable Energy Applications (IECRE 2014 IEC 0 System) - Basic Rules - Edition 1.0 4209 IECQ 03-3-2 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Prodecure Part 3-2: IECQ 2014 IEC 0 Approved Component Products, Related Materials & Assemblies Scheme, IECQ Approved Component Automotive Qualification Programme (IECQ AC-AQP) - 4210 IECQ 03-4 IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Prodecure Part 4: IECQ AVIONICS 2014 IEC 0 Scheme Avionics Parts and Assembly Management - Edition 3.0 4211 IECQ 01 NULL 2014 IEC 0 4212 62271-37-082 NULL 2014 IEC 0 CORR 1 4213 62271-211 High-voltage switchgear and controlgear Part 211: Direct connection between power transformers and gas-insulated metal- 2014 IEC 0 enclosed switchgear for rated voltages above 52 kV - Edition 1.0 4214 62271-201(2 NULL 2014 IEC 0 4215 62282-4-101 Fuel cell technologies Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power 2014 IEC 0 units (APU) Safety of electrically powered industrial trucks - Edition 1.0 4216 62280 Railway applications Communication, signalling and processing systems Safety related communication in transmission 2014 IEC 0 systems - Edition 1.0 4217 62288 Maritime navigation and radiocommunication equipment and systems Presentation of navigation-related information on 2014 IEC 0 shipborne navigational displays General requirements, methods of testing and required test results - Edition 2.0 4218 62290-2 Railway applications Urban guided transport management and command/control systems Part 2: Functional requirements 2014 IEC 0 specification - Edition 2.0 4219 62290-1 Railway applications Urban guided transport management and command/control systems Part 1: System principles and 2014 IEC 0 fundamental concepts - Edition 2.0 4220 62271-102 High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches - Edition 1.2 2014 IEC 0 CORR 4 4221 62271-106 High-voltage switchgear and controlgear Part 106: Alternating current contactors, contactor-based controllers and motor- 2014 IEC 0 CORR 1 starters - Edition 1.0 4222 62137-4 Electronics assembly technology Part 4: Endurance test methods for solder joint of area array type package surface mount 2014 IEC 0 devices - Edition 1.0 4223 62116(2 NULL 2014 IEC 0 4224 62196-3 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 3: Dimensional 2014 IEC 0 compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers - Edition 1.0 4225 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 1: General 2014 IEC 0 requirements - Edition 3.0 4226 62149-8 Fibre optic active components and devices Performance standards Part 8: Seeded reflective semiconductor optical 2014 IEC 0 amplifier devices - Edition 1.0 4227 62149-9 Fibre optic active components and devices Performance standards Part 9: Seeded reflective semiconductor optical 2014 IEC 0 amplifier transceivers - Edition 1.0 4228 62149-2(2 NULL 2014 IEC 0 4229 62149-2 Fibre optic active components and devices Performance standards Part 2: 850 nm discrete vertical cavity surface emitting 2014 IEC 0 laser devices - Edition 2.0 4230 62149-3(2 NULL 2014 IEC 0 4231 62149-3 Fibre optic active components and devices Performance standards Part 3: Modulator-integrated laser diode transmitters for 2014 IEC 0 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems - Edition 2.0 4232 62343-2 Dynamic modules Part 2: Reliability qualification - Edition 2.0 2014 IEC 0 4233 62341-1-2(2 NULL 2014 IEC 0 4234 62366(2 NULL 2014 IEC 0 4235 62368-1(2 NULL 2014 IEC 0 4236 62351-3 Power systems management and associated information exchange - Data and communications security - Part 3: 2014 IEC 0 Communication network and system security - Profiles including TCP/IP - Edition 1.0 4237 62353 Medical electrical equipment Recurrent test and test after repair of medical electrical equipment - Edition 2.0 2014 IEC 0 4238 62343-3-3 Dynamic modules Part 3-3: Performance specification templates Wavelength selective switches - Edition 1.0 2014 IEC 0 4239 62343-5-1 Dynamic modules Part 5-1 Test methods Dynamic gain tilt equalizer Gain tilt settling time measurement - Edition 2.0 2014 IEC 0 4240 62325-451-2 Framework for energy market communications Part 451-2: Scheduling business process and contextual model for CIM 2014 IEC 0 European market - Edition 1.0 4241 62325-451-3 Framework for energy market communications Part 451-3: Transmission capacity allocation business process (explicit or 2014 IEC 0 implicit auction) and contextual models for European market - Edition 1.1; Consolidated Reprint 4242 62325-301 Framework for energy market communications Part 301: Common information model (CIM) extensions for markets - 2014 IEC 0 Edition 1.0 4243 62396-5 Process management for avionics Atmospheric radiation effects Part 5: Assessment of thermal neutron fluxes and single 2014 IEC 0 event effects in avionics systems - Edition 1.0 4244 62388 CORR 1 Maritime navigation and radiocommunication equipment and systems Shipborne radar Performance requirements, 2014 IEC 0 methods of testing and required test results - Edition 2.0 4245 62379-5-1 Common control interface for networked digital audio and video products Part 5-1: Transmission over networks General - 2014 IEC 0 Edition 1.0 4246 62379-5-2 Common control interface for networked digital audio and video products Part 5-2: Transmission over networks 2014 IEC 0 Signalling - Edition 1.0 4247 62386-102 Digital addressable lighting interface - Part 102: General requirements - Control gear - Edition 2.0 2014 IEC 0 4248 62386-103 Digital addressable lighting interface Part 103: General requirements Control devices - Edition 1.0 2014 IEC 0 4249 62386-101 Digital addressable lighting interface - Part 101: General requirements - System components - Edition 2.0 2014 IEC 0 4250 62443-3-3 Industrial communication networks Network and system security Part 3-3: System security requirements and security 2014 IEC 0 CORR 1 levels - Edition 1.0 4251 62442-2 Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent 2014 IEC 0 lamps) Method of measurement to determine the efficiency of the controlgear - Edition 1.0 4252 62442-3 Energy performance of lamp controlgear Part 3: Controlgear for halogen lamps and LED modules Method of 2014 IEC 0 measurement to determine the efficiency of the controlgear - Edition 1.0 4253 62629-12-1 3D Display devices Part 12-1: Measuring methods for stereoscopic displays using glasses Optical - Edition 1.0 2014 IEC 0 4254 62626-1 Low-voltage switchgear and controlgear enclosed equipment Part 1: Enclosed switch-disconnectors outside the scope of 2014 IEC 0 IEC 60947-3 to provide isolation during repair and maintenance work - Edition 1.0 4255 62586-2 CORR NULL 2014 IEC 0 1 4256 62607-3-1 Nanomanufacturing Key control characteristics Part 3-1: Luminescent nanomaterials Quantum efficiency - Edition 1.0 2014 IEC 0 4257 62608-1 Multimedia home network configuration Basic reference model Part 1: System model - Edition 1.0 2014 IEC 0 4258 62676-4 Video surveillance systems for use in security applications Part 4: Application guidelines - Edition 1.0 2014 IEC 0 4259 62679-1-1 Electronic paper displays Part 1-1: Terminology - Edition 1.0 2014 IEC 0 4260 62679-3-1 Electronic paper displays Part 3-1: Optical measuring methods - Edition 1.0 2014 IEC 0 4261 62682 Management of alarms systems for the process industries - Edition 1.0 2014 IEC 0 4262 62705 Nuclear power plants Instrumentation and control important to safety Radiation monitoring systems (RMS): 2014 IEC 0 Characteristics and lifecycle - Edition 1.0 4263 62694 Radiation protection instrumentation Backpack-type radiation detector (BRD) for the detection of illicit trafficking of 2014 IEC 0 radioactive material - Edition 1.0 4264 62695 Railway applications Fixed installations Traction transformers - Edition 1.0 2014 IEC 0 4265 62701 NULL 2014 IEC 0 4266 62656-1 Standardized product ontology register and transfer by spreadsheets Part 1: Logical structure for data parcels - Edition 1.0 2014 IEC 0 4267 62670-2 Photovoltaic concentrators (CPV) Performance testing Part 2: Energy measurement - Edition 1.0 2014 IEC 0 4268 62675 Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-metal hydride prismatic 2014 IEC 0 rechargeable single cells - Edition 1.0 4269 62645 Nuclear power plants Instrumentation and control systems Requirements for security programmes for computer-based 2014 IEC 0 systems - Edition 1.0 4270 62570 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment - Edition 2014 IEC 0 1.0 4271 62572-3 Fibre optic active components and devices Reliability standards Part 3: Laser modules used for telecommunication - 2014 IEC 0 Edition 3.0 4272 62504 General lighting Light emitting diode (LED) products and related equipment Terms and definitions - Edition 1.0 2014 IEC 0 4273 62501 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission Electrical testing - 2014 IEC 0 Edition 1.1; Consolidated Reprint 4274 62522 Calibration of tuneable laser sources - Edition 1.0 2014 IEC 0 4275 62489-2 Electroacoustics Audio-frequency induction loop systems for assisted hearing Part 2: Methods of calculating and 2014 IEC 0 measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure - Ed 4276 62489-1 Electroacoustics Audio-frequency induction loop systems for assisted hearing Part 1: Methods of measuring and 2014 IEC 0 specifying the performance of system components - Edition 1.1; Consolidated Reprint 4277 62481-4 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability 2014 IEC 0 solutions - Edition 1.0 4278 62485-3 Safety requirements for secondary batteries and battery installations Part 3: Traction batteries - Edition 2.0 2014 IEC 0 4279 62885-3 Surface cleaning appliances Part 3: Wet carpet cleaning appliances Methods for measuring the performance - Edition 1.0 2014 IEC 0 4280 62841-3-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-9: Particular 2014 IEC 0 requirements for transportable mitre saws - Edition 1.0 4281 62868 Organic light emitting diode (OLED) panels for general lighting Safety requirements - Edition 1.0 2014 IEC 0 4282 62894 Photovoltaic inverters - Data sheet and name plate - Edition 1.1; Consolidate Reprint 2014 IEC 0 4283 62929 Cleaning robots for household use Dry-cleaning: Methods of measuring performance - Edition 1.0 2014 IEC 0 4284 62851-1 Alarm and electronic security systems Social alarm systems Part 1: System requirements - Edition 1.0 2014 IEC 0 4285 62851-2 Alarm and electronic security systems Social alarm systems Part 2: Trigger devices - Edition 1.0 2014 IEC 0 4286 62851-3 Alarm and electronic security systems Social alarm systems Part 3: Local unit and controller - Edition 1.0 2014 IEC 0 4287 62851-5 Alarm and electronic security systems Social alarm systems Part 5: Interconnections and communications - Edition 1.0 2014 IEC 0 4288 62852 Connectors for DC-application in photovoltaic systems Safety requirements and tests - Edition 1.0 2014 IEC 0 4289 62841-3-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-1: Particular 2014 IEC 0 requirements for transportable table saws - Edition 1.0 4290 62841-3-6 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-6: Particular 2014 IEC 0 requirements for transportable diamond drills with liquid system - Edition 1.0 4291 62826 Surface cleaning appliances Floor treatment machines with or without traction drive, for commercial use Methods of 2014 IEC 0 measuring the performance - Edition 1.0 4292 62841-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 1: General 2014 IEC 0 requirements - Edition 1.0 4293 62841-1 CORR Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 1: General 2014 IEC 0 1 requirements - Edition 1.0 4294 62841-2-2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-2: Particular 2014 IEC 0 requirements for hand-held screwdrivers and impact wrenches - Edition 1.0 4295 62841-2-4 NULL 2014 IEC 0 4296 62841-2-5 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-5: Particular 2014 IEC 0 requirements for hand-held circular saws - Edition 1.0 4297 62790 Junction boxes for photovoltaic modules Safety requirements and tests - Edition 1.0 2014 IEC 0 4298 62798 Industrial electroheating equipment Test methods for infrared emitters - Edition 1.0 2014 IEC 0 4299 62798 CORR 1 Industrial electroheating equipment Test methods for infrared emitters - Edition 1.0 2014 IEC 0 4300 62817 Photovoltaic systems Design qualification of solar trackers - Edition 1.0 2014 IEC 0 4301 62716 CORR 1 Photovoltaic (PV) modules Ammonia corrosion testing - Edition 1.0 2014 IEC 0 4302 62717 LED modules for general lighting Performance requirements - Edition 1.1; Consolidated Reprint 2014 IEC 0 4303 62709 Radiation protection instrumentation Security screening of humans Measuring the imaging performance of X-ray systems 2014 IEC 0 - Edition 1.0 4304 62714-1 Engineering data exchange format for use in industrial automation systems engineering Automation markup language Part 2014 IEC 0 1: Architecture and general requirements - Edition 1.0 4305 62715-6-1 Flexible display devices - Part 6-1: Mechanical stress test methods - Edition 1.0 2014 IEC 0 4306 62722-1 Luminaire performance Part 1: General requirements - Edition 1.0 2014 IEC 0 4307 62722-2-1 Luminaire performance Part 2-1: Particular requirements for LED luminaires - Edition 1.0 2014 IEC 0 4308 62734 Industrial networks - Wireless communication network and communication profiles - ISA 100.11a - Edition 1.0 2014 IEC 0 4309 62746-10-1 NULL 2014 IEC 0 4310 62747 Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems - Edition 1.0 2014 IEC 0 4311 62751-1 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 1: General 2014 IEC 0 requirements - Edition 1.0 4312 62751-2 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 2: Modular 2014 IEC 0 multilevel converters - Edition 1.0 4313 62761 Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) 2014 IEC 0 devices in radio frequency (RF) - Edition 1.0 4314 CISPR 16-1-6 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-6: Radio disturbance and 2014 IEC 0 immunity measuring apparatus EMC antenna calibration - Edition 1.1; Consolidated Reprint 4315 CISPR 16-2-3 NULL 2014 IEC 0 AMD 2 4316 CISPR 16-2-3(2 NULL 2014 IEC 0 4317 CISPR TR 16- Specification for radio disturbance and immunity measuring apparatus and methods Part 4-5: Uncertainties, statistics and 2014 IEC 0 4-5 limit modelling Conditions for the use of alternative test methods - Edition 1.1; Consolidated Reprint 4318 GUIDE 110(2 NULL 2014 IEC 0 4319 GUIDE 107 Electromagnetic compatibility Guide to the drafting of electromagnetic compatibility publications - Edition 4.0 2014 IEC 0 4320 CISPR 16-1-1 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and 2014 IEC 0 immunity measuring apparatus Measuring apparatus - Edition 4.0 4321 CISPR 16-2-1(2 NULL 2014 IEC 0 4322 CISPR 16-4-2(2 NULL 2014 IEC 0 4323 CISPR 16-1-5 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and 2014 IEC 0 immunity measuring apparatus Antenna calibration sites and reference test sites for 5 MHz to 18 GHz - Edition 2.1; Consolidated Reprint 4324 CISPR 16-1-2(2 NULL 2014 IEC 0 4325 80601-2-58 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens 2014 IEC 0 removal devices and vitrectomy devices for ophthalmic surgery - Edition 2.1; Consolidated Reprint 4326 65700-19-03 Bushings for DC application - Edition 1.0 2014 IEC 0 4327 82045-2 CORR Document management - Part 2: Metadata elements and information reference model - Edition 1.0 2014 IEC 0 1 4328 61869-4 CORR Instrument transformers Part 4: Additional requirements for combined transformers - Edition 1.0 2014 IEC 0 1 4329 61851-24 Electric vehicle conductive charging system Part 24: Digital communication between a d.c. EV charging station and an 2014 IEC 0 electric vehicle for control of d.c. charging - Edition 1.0 4330 61851-23 Electric vehicle conductive charging system Part 23: DC electric vehicle charging station - Edition 1.0 2014 IEC 0 4331 61858-1 Electrical insulation systems Thermal evaluation of modifications to an established electrical insulation system (EIS) Part 2014 IEC 0 1: Wire-wound winding EIS - Edition 1.0 4332 61858-2 Electrical insulation systems Thermal evaluation of modifications to an established electrical insulation system (EIS) Part 2014 IEC 0 2: Form-wound EIS - Edition 1.0 4333 61892-5 Mobile and fixed offshore units Electrical installations Part 5: Mobile units - Edition 3.0 2014 IEC 0 4334 61883-8(2 NULL 2014 IEC 0 4335 61910-1 Medical electrical equipment Radiation dose documentation Part 1: Radiation dose structured reports for radiography and 2014 IEC 0 radioscopy - Edition 1.0 4336 61892-7 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas - Edition 3.0 2014 IEC 0 4337 61883-6 Consumer audio/video equipment Digital interface Part 6: Audio and music data transmission protocol - Edition 3.0 2014 IEC 0 4338 61966-12-2 Multimedia systems and equipment Colour measurement and management Part 12-2: Simple metadata format for 2014 IEC 0 identification of colour gamut - Edition 1.0 4339 61966-2-1 Multimedia Systems and Equipment - Colour Measurement and Management - Part 2-1: Colour Management - Default 2014 IEC 0 CORR 1 RGB Colour Space - sRGB - Edition 1.0 4340 61936-1(2 NULL 2014 IEC 0 4341 61937-6(2 NULL 2014 IEC 0 4342 61837-2 AMD AMENDMENT 1 Surface mounted piezoelectric devices for frequency control and selection Standard outlines and 2014 IEC 0 1 terminal lead connections Part 2: Ceramic enclosures - Edition 2.1 4343 61837-2(2 NULL 2014 IEC 0 4344 61996-1 CORR Maritime navigation and radiocommunication equipment and systems Shipborne voyage data recorder (VDR) Part 1: 2014 IEC 0 1 Performance requirements, methods of testing and required test results - Edition 2.0 4345 61992-6(2 NULL 2014 IEC 0 4346 61992-2(2 NULL 2014 IEC 0 4347 62026-3 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 3: DeviceNet - Edition 3.0 2014 IEC 0 4348 62021-3 Insulating liquids Determination of acidity Part 3: Test methods for non-mineral insulating oils - Edition 1.0 2014 IEC 0 4349 61970-453(2 NULL 2014 IEC 0 4350 61978-1(2 NULL 2014 IEC 0 4351 61978-1 Fibre optic interconnecting devices and passive components Fibre optic passive chromatic dispersion compensators Part 1: 2014 IEC 0 Generic specification - Edition 3.0 4352 62056-1-0 Electricity metering data exchange The DLMS/COSEM suite Part 1-0: Smart metering standardisation framework - 2014 IEC 0 Edition 1.0 4353 62065(2 NULL 2014 IEC 0 4354 62074-1(2 NULL 2014 IEC 0 4355 62031 LED modules for general lighting Safety specifications - Edition 1.2; Consolidated Reprint 2014 IEC 0 4356 62035(2 NULL 2014 IEC 0 4357 62047-20 Semiconductor devices Micro-electromechanical devices Part 20: Gyroscopes - Edition 1.0 2014 IEC 0 4358 62047-21 Semiconductor devices Micro-electromechanical devices Part 21: Test method for Poisson's ratio of thin film MEMS 2014 IEC 0 materials - Edition 1.0 4359 62047-22 Semiconductor devices Micro-electromechanical devices Part 22: Electromechanical tensile test method for conductive 2014 IEC 0 thin films on flexible substrates - Edition 1.0 4360 62055-41 NULL 2014 IEC 0 (REDLINE) 4361 62055-41(2 NULL 2014 IEC 0 4362 62055-41 Electricity metering Payment systems Part 41: Standard transfer specification (STS) Application layer protocol for one- 2014 IEC 0 way token carrier systems - Edition 2.0 4363 62053-24 Electricity metering equipment (a.c.) Particular requirements Part 24: Static meters for reactive energy at fundamental 2014 IEC 0 frequency (classes 0,5 S, 1 S and 1) - Edition 1.1; Consolidated Reprint 4364 61753-071-2 Fibre optic interconnecting devices and passive components Performance standard Part 071-2: Non-connectorized single- 2014 IEC 0 spatial switches for category C Controlled environments - Edition 1.0 2 _أ and 2 2 _أ mode fibre optic 1 4365 61753-053-2 Fibre optic interconnecting devices and passive components Performance standard Part 053-2: Non-connectorized, single- 2014 IEC 0 mode fibre, electrically controlled, variable optical attenuator for category C Controlled environments - Edition 1.0 4366 61753-081-2(2 NULL 2014 IEC 0 4367 61754-15 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 15: Type LSH connector 2014 IEC 0 CORR 1 family - Edition 2.0 4368 61754-4 CORR Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 4: Type SC connector 2014 IEC 0 1 family - Edition 2.0 4369 61754-30 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 30: Type CLIK 2014 IEC 0 connector series - Edition 1.0 4370 61784-1 Industrial communication networks Profiles Part 1: Fieldbus profiles - Edition 4.0 2014 IEC 0 4371 61754-7-1 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 7-1: Type MPO 2014 IEC 0 connector family One fibre row - Edition 1.0 4372 61747-2-2 Liquid crystal display devices Part 2-2: Matrix colour LCD modules Blank detail specification - Edition 2.0 2014 IEC 0 4373 61747-4-1 Liquid crystal display devices Part 4-1: Matrix colour LCD modules Essential ratings and characteristics - Edition 2.0 2014 IEC 0 4374 61753-031-3 Fibre optic interconnecting devices and passive components performance standard Part 031-3: Non-connectorized single- 2014 IEC 0 - N non-wavelengthselective branching devices (NWBD) for Category U Uncontrolled environment_أN and 2_أmode 1 Edition 2.0 4375 61753-031-2 Fibre optic interconnecting devices and passive components Performance standard Part 031-2: Non-connectorized single- 2014 IEC 0 N non-wavelengthselective branching devices for Category C Controlled environment - Edition 1.0_أN and 2_أmode 1 4376 61753-031-6 Fibre optic interconnecting devices and passive components Performance standard Part 031-6: Non-connectorized single- 2014 IEC 0 mode 1xN and 2xN non-wavelengthselective branching devices for Category O Uncontrolled environment - Edition 2.0 4377 61753-041-2 Fibre optic interconnecting devices and passive components Performance standard Part 041-2: Non-connectorized single- 2014 IEC 0 mode OTDR reflecting device for category C Controlled environment - Edition 1.0 4378 61753-042-2 Fibre optic interconnecting devices and passive components Performance standard Part 042-2: Plug-pigtail-style and plug- 2014 IEC 0 receptacle-style OTDR reflecting devices for category C Controlled environments - Edition 1.0 4379 61747-10-2 Liquid crystal display devices Part 10-2: Environmental, endurance and mechanical test methods Environmental and 2014 IEC 0 endurance - Edition 1.0 4380 61747-1-1 Liquid crystal display devices Part 11: Generic Generic specification - Edition 1.0 2014 IEC 0 4381 61747-1-2 Liquid crystal display devices Part 1-2: Generic Terminology and letter symbols - Edition 1.0 2014 IEC 0 4382 61557-8 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2014 IEC 0 or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems - Edition 3.0 4383 61557-9 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2014 IEC 0 or monitoring of protective measures Part 9: Equipment for insulation fault location in IT systems - Edition 3.0 4384 61558-2-10 Safety of transformers, reactors, power supply units and combinations thereof Part 2-10: Particular requirements and tests 2014 IEC 0 for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V - Edition 4385 61557-15 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2014 IEC 0 or monitoring of protective measures Part 15: Functional safety requirements for insulation monitoring devices in IT systems and e 4386 61557-16 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2014 IEC 0 or monitoring of protective measures Part 16: Equipment for testing the effectiveness of the protective measures of electrical equ 4387 61534-1 Powertrack systems Part 1: General requirements - Edition 2.1 Consolidated Reprint 2014 IEC 0 4388 61534-21 Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting - 2014 IEC 0 Edition 2.0 4389 61535 CORR 1 Installation couplers intended for permanent connection in fixed installations - Edition 1.0 2014 IEC 0 4390 61534-22 Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation 2014 IEC 0 - Edition 2.0 4391 61481-2 Live working Phase comparators Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. - Edition 1.0 2014 IEC 0 4392 61482-1-2 Live working Protective clothing against the thermal hazards of an electric arc Part 1-2: Test methods Method 2: 2014 IEC 0 Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) - Edition 2.0 4393 61481-1 Live working Phase comparators Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. - Edition 1.0 2014 IEC 0 4394 61340-4-8 Electrostatics Part 4-8: Standard test methods for specific applications Electrostatic discharge shielding Bags - Edition 2.0 2014 IEC 0 4395 61340-4-4 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate 2014 IEC 0 bulk containers (FIBC) - Edition 2.1 Consolidated Reprint 4396 61375-2-5 Electronic railway equipment Train communication network (TCN) Part 2-5: Ethernet train backbone - Edition 1.0 2014 IEC 0 4397 61375-3-4 Electronic railway equipment Train communication network (TCN) Part 3-4: Ethernet Consist Network (ECN) - Edition 2014 IEC 0 1.0 4398 61347-2-13 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules - 2014 IEC 0 Edition 2.1; Consolidated Reprint 4399 61439-5 Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks - Edition 2014 IEC 0 2.0 4400 61400-23 Wind turbines Part 23: Full-scale structural testing of rotor blades - Edition 1.0 2014 IEC 0 4401 S316-14 Standard For Performance Of Video Surveillance Systems 2014 IEC 4402 61400-12-2 Wind turbines Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry - Edition 2013 IEC 0 1.0 4403 61400-2(2 NULL 2013 IEC 0 4404 61400-2(3 NULL 2013 IEC 0 4405 61472 Live working Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV A method of 2013 IEC 0 calculation - Edition 3.0 4406 61427-1 Secondary cells and batteries for renewable energy storage General requirements and methods of test Part 1: Photovoltaic 2013 IEC 0 off-grid application - Edition 1.0 4407 61435(2 NULL 2013 IEC 0 4408 61435(3 NULL 2013 IEC 0 4409 61439-3 CORR Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary 2013 IEC 0 1 persons (DBO) - Edition 1.0 4410 61347-2-1(2 NULL 2013 IEC 0 4411 61347-2-1(3 NULL 2013 IEC 0 4412 61499-4 Function blocks Part 4: Rules for compliance profiles - Edition 2.0 2013 IEC 0 4413 61496-2 Safety of machinery Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active 2013 IEC 0 opto-electronic protective devices (AOPDs) - Edition 3.0 4414 61547 INT 1 EQUIPMENT FOR GENERAL LIGHTING PURPOSES EMC IMMUNITY REQUIREMENTS - Edition 2.0 2013 IEC 0 4415 61534-1 CORR NULL 2013 IEC 0 1 4416 61514-2 2013 NULL 2013 IEC 0 4417 61514-2(2 NULL 2013 IEC 0 4418 61514-2(3 NULL 2013 IEC 0 4419 61557-14 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c Equipment for testing, measuring or 2013 IEC 0 monitoring of protective measures Part 14: Equipment for testing the safety of electrical equipment of machinery - Edition 1.0 4420 61558-2-16(2 NULL 2013 IEC 0 4421 61558-2-16(3 NULL 2013 IEC 0 4422 61557-10 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2013 IEC 0 or monitoring of protective measures Part 10: Combined measuring equipment for testing, measuring or monitoring of protective meas 4423 61587-3 Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 3: Electromagnetic shielding 2013 IEC 0 performance tests for cabinets and subracks - Edition 2.0 4424 61558-2-26 Safety of transformers, reactors, power supply units and combinations thereof Part 2-26: Particular requirements and tests 2013 IEC 0 for transformers and power supply units all for saving energy and other purposes - Edition 1.0 4425 61672-1(2 NULL 2013 IEC 0 4426 61672-1(3 NULL 2013 IEC 0 4427 61672-3(2 NULL 2013 IEC 0 4428 61672-3(3 NULL 2013 IEC 0 4429 61672-2(2 NULL 2013 IEC 0 4430 61672-2(3 NULL 2013 IEC 0 4431 61643-311 Components for low-voltage surge protective devices Part 311: Performance requirements and test circuits for gas 2013 IEC 0 discharge tubes (GDT) - Edition 2.0 4432 61643-312 Components for low-voltage surge protective devices Part 312: Selection and application principles for gas discharge tubes 2013 IEC 0 - Edition 1.0 4433 61643-312 Components for low-voltage surge protective devices Part 312: Selection and application principles for gas discharge tubes 2013 IEC 0 CORR 1 - Edition 1.0 4434 61587-5 Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 5: Seismic tests for chassis, 2013 IEC 0 subracks and plug-in units - Edition 1.0 4435 61747-10-1 Liquid crystal display devices Part 10-1: Environmental, endurance and mechanical test methods Mechanical - Edition 1.0 2013 IEC 0 4436 61747-2-1 Liquid crystal display devices Part 2-1: Passive matrix monochrome LCD modules Blank detail specification - Edition 2.0 2013 IEC 0 4437 61710 Power law model Goodness-of-fit tests and estimation methods - Edition 2.0 2013 IEC 0 4438 61730-1 Photovoltaic (PV) module safety qualification Part 1: Requirements for construction - Edition 2.0 2013 IEC 0 4439 61689 Ultrasonics Physiotherapy systems Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 2013 IEC 0 MHz - Edition 3.0 4440 61753-058-2 Fibre optic interconnecting devices and passive components Performance standard Part 058-2: Single mode fibre pigtailed 2013 IEC 0 style optical power limiter for category C Controlled environment - Edition 1.0 4441 61753-059-2 Fibre optic interconnecting devices and passive components Performance standard Part 059-2: Single-mode fibre plug- 2013 IEC 0 receptacle style optical limiter for category C Controlled environment - Edition 1.0 4442 61753-051-3 Fibre optic interconnecting devices and passive components Performance standard Part 051-3: Single-mode fibre, plug 2013 IEC 0 style fixed attenuators for category U Uncontrolled environment - Edition 2.0 4443 61747-40-1 Liquid crystal display devices Part 40-1: Mechanical testing of display cover glass for mobile devices Guidelines - Edition 2013 IEC 0 1.0 4444 61754-6(2 NULL 2013 IEC 0 4445 61754-6(3 NULL 2013 IEC 0 4446 61754-6(4 NULL 2013 IEC 0 4447 61754-6(5 NULL 2013 IEC 0 4448 61784-5-11(2 NULL 2013 IEC 0 4449 61784-5-11(3 NULL 2013 IEC 0 4450 61784-5-1 Industrial communication networks Profiles Part 5-1: Installation of fieldbuses Installation profiles for CPF 1 - Edition 2013 IEC 0 1.0 4451 61754-27 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 27: Type M12-FO 2013 IEC 0 connector family - Edition 1.0 4452 61754-4 NULL 2013 IEC 0 EDITION 2 4453 61754-4(2 NULL 2013 IEC 0 4454 61754-4(3 NULL 2013 IEC 0 4455 61754-4(4 NULL 2013 IEC 0 4456 61754-1(2 NULL 2013 IEC 0 4457 61754-1(3 NULL 2013 IEC 0 4458 61753-088-2 Fibre optic interconnecting devices and passive components Performance standard Part 088-2: Non-connectorized single- 2013 IEC 0 mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C Controlled environments - Edition 1.0 4459 61753-089-2 Fibre optic interconnecting devices and passive components Performance standard Part 089-2: Non-connectorized single- 2013 IEC 0 mode bidirectional OTDR monitoring WWDM devices for category C Controlled environment - Edition 1.0 4460 62047-11 Semiconductor devices Micro-electromechanical devices Part 11: Test method for coefficients of linear thermal expansion 2013 IEC 0 of free-standing materials for micro-electromechanical systems - Edition 1.0 4461 62047-18 Semiconductor devices Micro-electromechanical devices Part 18: Bend testing methods of thin film materials - Edition 2013 IEC 0 1.0 4462 62047-19 Semiconductor devices Micro-electromechanical devices Part 19: Electronic compasses - Edition 1.0 2013 IEC 0 4463 62040-4 Uninterruptible power systems (UPS) Part 4: Environmental aspects Requirements and reporting - Edition 1.0 2013 IEC 0 4464 62037-5 Passive RF and microwave devices, intermodulation level measurement Part 5: Measurement of passive intermodulation in 2013 IEC 0 filters - Edition 1.0 4465 62037-6 Passive RF and microwave devices, intermodulation level measurement Part 6: Measurement of passive intermodulation in 2013 IEC 0 antennas - Edition 1.0 4466 62040-1 Uninterruptible power systems (UPS) Part 1: General and safety requirements for UPS - Edition 1.1; Consolidated Reprint 2013 IEC 0 4467 62068 Electrical insulating materials and systems General method of evaluation of electrical endurance under repetitive voltage 2013 IEC 0 impulses - Edition 1.0 4468 62056-6-2 Electricity metering data exchange The DLMS/COSEM suite Part 6-2: COSEM interface classes - Edition 2.0 2013 IEC 0 4469 62056-7-6 Electricity metering data exchange The DLMS/COSEM suite Part 7-6: The 3-layer, connection-oriented HDLC based 2013 IEC 0 communication profile - Edition 1.0 4470 62056-8-3 Electricity metering data exchange The DLMS/COSEM suite Part 8-3: Communication profile for PLC S-FSK 2013 IEC 0 neighbourhood networks - Edition 1.0 4471 62056-9-7 Electricity metering data exchange The DLMS/COSEM suite Part 9-7: Communication profile for TCP-UDP/IP networks 2013 IEC 0 - Edition 1.0 4472 62056-3-1 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with 2013 IEC 0 carrier signalling - Edition 1.0 4473 62056-5-3 Electricity metering data exchange The DLMS/COSEM suite Part 5-3: DLMS/COSEM application layer - Edition 2.0 2013 IEC 0 4474 62056-6-1 Electricity metering data exchange The DLMS/COSEM suite Part 6-1: Object Identification System (OBIS) - Edition 2.0 2013 IEC 0 4475 61970-552 Energy management system application program interface (EMS-API) Part 552: CIMXML Model exchange format - 2013 IEC 0 Edition 2.0 4476 61970-456 Energy management system application program interface (EMS-API) Part 456: Solved power system state profiles - 2013 IEC 0 Edition 1.1; Consolidated Reprint 4477 61968-100 Application integration at electric utilities System interfaces for distribution management Part 100: Implementation 2013 IEC 0 profiles - Edition 1.0 4478 61968-11 Application integration at electric utilities System interfaces for distribution management Part 11: Common information 2013 IEC 0 model (CIM) extensions for distribution - Edition 2.0 4479 61968-9(2 NULL 2013 IEC 0 4480 61968-9(3 NULL 2013 IEC 0 4481 61970-301(2 NULL 2013 IEC 0 4482 61970-301 Energy management system application program interface (EMS-API) Part 301: Common information model (CIM) base - 2013 IEC 0 Edition 6.0 4483 61970-301(3 NULL 2013 IEC 0 4484 61970-452 Energy management system application program interface (EMS-API) Part 452: CIM model exchange specification - 2013 IEC 0 Edition 2.0 4485 61996-1 Maritime navigation and radiocommunication equipment and systems Shipborne voyage data recorder (VDR) Part 1: 2013 IEC 0 Performance requirements, methods of testing and required test results - Edition 2.0 4486 61784-5-13 Industrial communication networks Profiles Part 5-13: Installation of fieldbuses Installation profiles for CPF 13 - Edition 2013 IEC 0 1.0 4487 61788-16 Superconductivity Part 16: Electronic characteristic measurements Power-dependent surface resistance of superconductors 2013 IEC 0 at microwave frequencies - Edition 1.0 4488 61788-17 Superconductivity Part 17: Electronic characteristic measurements Local critical current density and its distribution in 2013 IEC 0 large-area superconducting films - Edition 1.0 4489 61788-18 Superconductivity Part 18: Mechanical properties measurement Room temperature tensile test of Ag- and/or Ag alloy- 2013 IEC 0 sheathed Bi-2223 and Bi-2212 composite superconductors - Edition 1.0 4490 61788-19 Superconductivity Part 19: Mechanical properties measurement Room temperature tensile test of reacted Nb3Sn 2013 IEC 0 composite superconductors - Edition 1.0 4491 61788-12 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to noncopper volume ratio of 2013 IEC 0 Nb3Sn composite superconducting wires - Edition 2.0 4492 61788-12(2 NULL 2013 IEC 0 4493 61788-12(3 NULL 2013 IEC 0 4494 61786-1 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of 2013 IEC 0 human beings Part 1: Requirements for measuring instruments - Edition 1.0 4495 61784-5-6(2 NULL 2013 IEC 0 4496 61784-5-6(3 NULL 2013 IEC 0 4497 61784-5-8 Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 - Edition 2013 IEC 0 1.0 4498 61784-5-3(2 NULL 2013 IEC 0 4499 61784-5-3(3 NULL 2013 IEC 0 4500 61784-5-2(2 NULL 2013 IEC 0 4501 61784-5-2(3 NULL 2013 IEC 0 4502 61784-5-16 Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 - 2013 IEC 0 Edition 1.0 4503 61784-5-17 Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 - 2013 IEC 0 Edition 1.0 4504 61784-5-18 Industrial communication networks Profiles Part 518: Installation of fieldbuses Installation profiles for CPF 18 - Edition 2013 IEC 0 1.0 4505 61784-5-19 Industrial communication networks Profiles Part 5-19: Installation of fieldbuses Installation profiles for CPF 19 - Edition 2013 IEC 0 1.0 4506 61788-5 Superconductivity Part 5: Matrix to superconductor volume ratio measurement Copper to superconductor volume ratio of 2013 IEC 0 Cu/Nb-Ti composite superconducting wires - Edition 2.0 4507 61850-3(2 NULL 2013 IEC 0 4508 61850-3(3 NULL 2013 IEC 0 4509 61850-5 Communication networks and systems for power utility automation Part 5: Communication requirements for functions and 2013 IEC 0 device models - Edition 2.0 4510 61924-2 CORR Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Part 2: Modular 2013 IEC 0 1 structure for INS Operational and performance requirements, methods of testing and required test results - Edition 1.0 4511 61918(2 NULL 2013 IEC 0 4512 61918(3 NULL 2013 IEC 0 4513 61954 Static var compensators (SVC) - Testing of thyristor valves - Edition 2.2; Consolidated Reprint 2013 IEC 0 4514 61951-1(2 NULL 2013 IEC 0 4515 61951-1(3 NULL 2013 IEC 0 4516 61938 2013 NULL 2013 IEC 0 4517 61938(2 NULL 2013 IEC 0 4518 61938(3 NULL 2013 IEC 0 4519 61892-2 CORR Mobile and fixed offshore units Electrical installations Part 2: System design - Edition 2.0 2013 IEC 0 1 4520 61892-6(2 NULL 2013 IEC 0 4521 61892-6(3 NULL 2013 IEC 0 4522 61881-3(2 NULL 2013 IEC 0 4523 61881-3(3 NULL 2013 IEC 0 4524 61869-4 Instrument transformers Part 4: Additional requirements for combined transformers - Edition 1.0 2013 IEC 0 4525 80601-2-30(2 NULL 2013 IEC 0 4526 CISPR 16-4-2 NULL 2013 IEC 0 CORR 1 4527 CISPR 16-2-1 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of 2013 IEC 0 disturbances and immunity Conducted disturbance measurements - Edition 3.0 4528 CISPR 15 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment - 2013 IEC 0 Edition 8.1 Consolidated Reprint 4529 CISPR 15 INT NULL 2013 IEC 0 1 4530 CISPR 15 INT NULL 2013 IEC 0 2 4531 CISPR 20(2 NULL 2013 IEC 0 4532 CISPR 20(3 NULL 2013 IEC 0 4533 62731 Text-to-speech for television General requirements - Edition 1.0 2013 IEC 0 4534 62724 Railway applications Fixed installations Electric traction Insulating synthetic rope assemblies for support of overhead 2013 IEC 0 contact lines - Edition 1.0 4535 62715-1-1 Flexible display devices Part 1-1: Terminology and letter symbols - Edition 1.0 2013 IEC 0 4536 62718 Railway applications Rolling stock DC supplied electronic ballasts for lighting fluorescent lamps - Edition 1.0 2013 IEC 0 4537 62716 Photovoltaic (PV) modules Ammonia corrosion testing - Edition 1.0 2013 IEC 0 4538 62770 Fluids for electrotechnical applications Unused natural esters for transformers and similar electrical equipment - Edition 2013 IEC 0 1.0 4539 62860 Test methods for the characterization of organic transistors and materials - Edition 1.0 2013 IEC 0 4540 62860-1 Test methods for the characterization of organic transistor-based ring oscillators - Edition 1.0 2013 IEC 0 4541 62481-3(2 NULL 2013 IEC 0 4542 62481-3(3 NULL 2013 IEC 0 4543 62481-1(2 NULL 2013 IEC 0 4544 62481-1(3 NULL 2013 IEC 0 4545 62481-5 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5: DLNA Device Profile 2013 IEC 0 guidelines IEC - Edition 1.0 4546 62483 Environmental acceptance requirements for tin whisker susceptibility of tin and tin alloy surface finishes on semiconductor 2013 IEC 0 devices - Edition 1.0 4547 62496-2-4 Optical circuit boards Basic test and measurement procedures Part 2-4: Optical transmission test for optical circuit boards 2013 IEC 0 without input/output fibres - Edition 1.0 4548 62497-1 Railway applications Insulation coordination Part 1: Basic requirements Clearances and creepage distances for all 2013 IEC 0 electrical and electronic equipment - Edition 1.1; Consolidated Reprint 4549 62516-3 Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 3: Common API - Edition 1.0 2013 IEC 0 4550 62506 Methods for product accelerated testing - Edition 1.0 2013 IEC 0 4551 62542 Environmental standardization for electrical and electronic products and systems Glossary of terms - Edition 1.0 2013 IEC 0 4552 62555 Ultrasonics Power measurement High intensity therapeutic ultrasound (HITU) transducers and systems - Edition 1.0 2013 IEC 0 4553 62567 Overhead lines Methods for testing self-damping characteristics of conductors - Edition 1.0 2013 IEC 0 4554 62671 Nuclear power plants Instrumentation and control important to safety Selection and use of industrial digital devices of 2013 IEC 0 limited functionality - Edition 1.0 4555 62673 Methodology for communication network dependability assessment and assurance - Edition 1.0 2013 IEC 0 4556 62670-1 Photovoltaic concentrators (CPV) Performance testing Part 1: Standard conditions - Edition 1.0 2013 IEC 0 4557 62664-1-1 Fibre optic interconnecting devices and passive components Fibre optic connector product specifications Part 1-1: LC-PC 2013 IEC 0 duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre - Edition 1.0 4558 62651 Nuclear power plants Instrumentation important to safety Thermocouples: characteristics and test methods - Edition 1.0 2013 IEC 0 4559 62657-2 Industrial communication networks Wireless communication networks Part 2: Coexistence management - Edition 2.0 2013 IEC 0 4560 62698 Multimedia home server systems Rights information interoperability for IPTV - Edition 1.0 2013 IEC 0 4561 62693 Industrial electroheating installations Test methods for infrared electroheating installations - Edition 1.0 2013 IEC 0 4562 62703 Expression of performance of fluorometric oxygen analyzers in liquid media - Edition 1.0 2013 IEC 0 4563 62683 Low-voltage switchgear and controlgear Product data and properties for information exchange - Edition 2.0 2013 IEC 0 4564 62679-3-2 Electronic paper display Part 3-2: Measuring method Electro-optical - Edition 1.0 2013 IEC 0 4565 62680-3 Universal serial bus interfaces for data and power Part 3: USB Battery Charging Specification, Revision 1.2 - Edition 1.0 2013 IEC 0 4566 62680-4 Universal serial bus interfaces for data and power Part 4: Universal Serial Bus Cables and Connectors Class Document, 2013 IEC 0 Revision 2.0 - Edition 1.0 4567 62676-1-1 Video surveillance systems for use in security applications Part 1-1: System requirements General - Edition 1.0 2013 IEC 0 4568 62676-1-2 Video surveillance systems for use in security applications Part 1-2: System requirements Performance requirements for 2013 IEC 0 video transmission - Edition 1.0 4569 62676-2-1 Video surveillance systems for use in security applications Part 2-1: Video transmission protocols General requirements - 2013 IEC 0 Edition 1.0 4570 62676-2-2 Video surveillance systems for use in security applications Part 2-2: Video transmission protocols IP interoperability 2013 IEC 0 implementation based on HTTP and REST services - Edition 1.0 4571 62676-2-3 Video surveillance systems for use in security applications Part 2-3: Video transmission protocols IP interoperability 2013 IEC 0 implementation based on Web services - Edition 1.0 4572 62676-3 Video surveillance systems for use in security applications Part 3: Analog and digital video interfaces - Edition 1.0 2013 IEC 0 4573 62680-1 Universal serial bus interfaces for data and power Part 1: Universal serial bus specification, revision 2.0 - Edition 1.0 2013 IEC 0 4574 62680-2 Universal serial bus interfaces for data and power Part 2: Universal serial bus Micro-USB cables and connectors 2013 IEC 0 specification, revision 1.01 - Edition 1.0 4575 62595-1-1 LCD backlight unit Part 1-1: Generic specification - Edition 1.0 2013 IEC 0 4576 62610-4 Mechanical structures for electronic equipment Thermal management for cabinets in accordance with IEC 60297 and IEC 2013 IEC 0 60917 series Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets - Edition 1.0 4577 62606 General requirements for arc fault detection devices - Edition 1.1; Consolidated Reprint 2013 IEC 0 4578 62606 CORR 1 NULL 2013 IEC 0 4579 62586-1 Power quality measurement in power supply systems Part 1: Power quality instruments (PQI) - Edition 2.0 2013 IEC 0 4580 62586-2 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements - Edition 2.0 2013 IEC 0 4581 62618 Radiation protection instrumentation Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection 2013 IEC 0 of illicit trafficking of radioactive material - Edition 1.0 4582 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V Performance requirements - Edition 2013 IEC 0 1.1; Consolidated Reprint 4583 62625-1 Electronic railway equipment - On board driving data recording system - Part 1: System specification - Edition 1.0 2013 IEC 0 4584 62629-1-2 3D display devices Part 1-2: Generic Terminology and letter symbols - Edition 1.0 2013 IEC 0 4585 62629-22-1 3D display devices Part 22-1: Measuring methods for autostereoscopic displays Optical - Edition 2.0 2013 IEC 0 4586 62439-1(2 NULL 2013 IEC 0 4587 62439-1(3 NULL 2013 IEC 0 4588 62443-3-3 Industrial communication networks Network and system security Part 3-3: System security requirements and security 2013 IEC 0 levels - Edition 1.0 4589 62448(2 NULL 2013 IEC 0 4590 62448(3 NULL 2013 IEC 0 4591 62388 2013 NULL 2013 IEC 0 4592 62396-3 Process management for avionics - Atmospheric radiation effects - Part 3: System design optimization to accommodate the 2013 IEC 0 single event effects (SEE) of atmospheric radiation - Edition 1.0 4593 62396-4 Process management for avionics Atmospheric radiation effects Part 4: Design of high voltage aircraft electronics 2013 IEC 0 managing potential single event effects - Edition 1.0 4594 62388(2 NULL 2013 IEC 0 4595 62388(3 NULL 2013 IEC 0 4596 62395-2 Electrical resistance trace heating systems for industrial and commercial applications Part 2: Application guide for system 2013 IEC 0 design, installation and maintenance - Edition 1.0 4597 62325-450 Framework for energy market communications Part 450: Profile and context modelling rules - Edition 1.0 2013 IEC 0 4598 62325-451-1 Framework for energy market communications - Part 451-1: Acknowledgement business process and contextual model for 2013 IEC 0 CIM European market - Edition 2.0 4599 62321-1 Determination of certain substances in electrotechnical products Part 1: Introduction and overview - Edition 1.0 2013 IEC 0 4600 62321-2 Determination of certain substances in electrotechnical products Part 2: Disassembly, disjointment and mechanical sample 2013 IEC 0 preparation - Edition 1.0 4601 62321-3-1 Determination of certain substances in electrotechnical products Part 3-1: Screening Lead, mercury, cadmium, total 2013 IEC 0 chromium and total bromine by X-ray fluorescence spectrometry - Edition 1.0 4602 62321-3-2 Determination of certain substances in electrotechnical products Part 3-2: Screening Total bromine in polymers and 2013 IEC 0 electronics by Combustion Ion Chromatography - Edition 1.0 4603 62321-4 Determination of certain substances in electrotechnical products Part 4: Mercury in polymers, metals and electronics by 2013 IEC 0 CV-AAS, CV-AFS, ICP-OES and ICP-MS - Edition 1.0 4604 62321-5 Determination of certain substances in electrotechnical products Part 5: Cadmium, lead and chromium in polymers and 2013 IEC 0 electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS - Edition 1.0 4605 62361-2 Power systems management and associated information exchange Interoperability in the long term Part 2: End to end 2013 IEC 0 quality codes for supervisory control and data acquisition (SCADA) - Edition 1.0 4606 62364 Hydraulic machines Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines - Edition 1.0 2013 IEC 0 4607 62325-351 Framework for energy market communications Part 351: CIM European market model exchange profile - Edition 2.0 2013 IEC 0 4608 62341-5-2 Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance testing methods - Edition 1.0 2013 IEC 0 4609 62341-5-3 Organic light emitting diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime - Edition 1.0 2013 IEC 0 4610 62343 Dynamic modules General and guidance - Edition 2.0 2013 IEC 0 4611 62153-4-3(2 NULL 2013 IEC 0 4612 62153-4-3(3 NULL 2013 IEC 0 4613 62215-3 Integrated circuits Measurement of impulse immunity Part 3: Non-synchronous transient injection method - Edition 1.0 2013 IEC 0 4614 62198(2 NULL 2013 IEC 0 4615 62198(3 NULL 2013 IEC 0 4616 62133 CORR 1 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed 2013 IEC 0 secondary cells, and for batteries made from them, for use in portable applications - Edition 2.0 4617 62128-1(2 NULL 2013 IEC 0 4618 62128-1(3 NULL 2013 IEC 0 4619 62128-2(2 NULL 2013 IEC 0 4620 62128-2(3 NULL 2013 IEC 0 4621 62128-3 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of 2013 IEC 0 a.c. and d.c. traction systems - Edition 1.0 4622 62127-3 Ultrasonics Hydrophones Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz - Edition 1.1; Consolidated 2013 IEC 0 Reprint 4623 62127-2 AMD NULL 2013 IEC 0 1 4624 62127-1 AMD NULL 2013 IEC 0 1 4625 62148-17 Fibre optic active components and devices Package and interface standards Part 17: Transmitter and receiver components 2013 IEC 0 with dual coaxial RF connectors - Edition 1.0 4626 62146-1 Grading capacitors for high-voltage alternating current circuit-breakers Part 1: General - Edition 1.1; Consolidated Reprint 2013 IEC 0 4627 62271-109 High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches - Edition 2.1; 2013 IEC 0 Consolidated Reprint 4628 62271-102 High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches - Edition 1.2; 2013 IEC 0 Consolidated Reprint 4629 62271-103 High-voltage switchgear and controlgear Part 103: Switches for rated voltages above 1 kV up to and including 52 kV - 2013 IEC 0 CORR 1 Edition 1.0 4630 62270(2 NULL 2013 IEC 0 4631 62270(3 NULL 2013 IEC 0 4632 62246-1-1 Reed switches Part 1-1: Generic specification Quality assessment - Edition 1.0 2013 IEC 0 4633 62264-1 Enterprise-control system integration Part 1: Models and terminology - Edition 2.0 2013 IEC 0 4634 62264-2(2 NULL 2013 IEC 0 4635 62264-2(3 NULL 2013 IEC 0 4636 62230(2 NULL 2013 IEC 0 4637 62230(3 NULL 2013 IEC 0 4638 62287-1 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic 2013 IEC 0 identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques - Edition 3.0 4639 62287-2 Maritime navigation and radiocommunication equipment and systems Class B shipborne equipment of the automatic 2013 IEC 0 identification system (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques - Edition 2.0 4640 62271-4 High-voltage switchgear and controlgear Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures - 2013 IEC 0 Edition 1.0 4641 62282-3-201 Fuel cell technologies Part 3-201: Stationary fuel cell power systems Performance test methods for small fuel cell power 2013 IEC 0 systems - Edition 1.0 4642 62271-207 High-voltage switchgear and controlgear Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated 2013 IEC 0 CORR 1 voltages above 52 kV - Edition 2.0 4643 62271-203 High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 2013 IEC 0 CORR 1 kV - Edition 2.0 4644 62271-112 High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc 2013 IEC 0 extinction on transmission lines - Edition 1.0 4645 62275(2 NULL 2013 IEC 0 4646 IECQ 01A NULL 2013 IEC 0 4647 IECQ 02 NULL 2013 IEC 0 4648 IECQ 03-2 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure Part 2: IECQ Approved 2013 IEC 0 Process Scheme - Edition 2.1 Consolidated Reprint 4649 IECQ 03-3 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure Part 3: IECQ Approved 2013 IEC 0 Component Products, Related Materials & Assemblies Scheme - Edition 2.1; Consolidated Reprint 4650 IECQ 03-3-1 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure Part 3-1: IECQ 2013 IEC 0 Approved Component Products, Related Materials & Assemblies Scheme, IECQ Approved Component Technology Certification (IECQ AC-TC) - Edition 1.0 4651 IECQ 03-3-2 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Prodecure Part 3-2: IECQ 2013 IEC 0 Approved Component Products, Related Materials & Assemblies Scheme, IECQ Approved Component Automotive Qualification Programme (IECQ AC-AQP) - 4652 IECQ 03-7 NULL 2013 IEC 0 4653 IECEX 05 NULL 2013 IEC 0 4654 IECEX 03-2 NULL 2013 IEC 0 4655 IECEX 03-3 NULL 2013 IEC 0 4656 IECEX 03-4 NULL 2013 IEC 0 4657 IECEX 03-5 NULL 2013 IEC 0 4658 PAS 62815-1 NULL 2013 IEC 0 4659 PAS 62815-2 NULL 2013 IEC 0 4660 PAS 62816-1 NULL 2013 IEC 0 4661 PAS 62816-2 External electrode fluorescent lamps Part 2: Performance specifications - Edition 1.0 2013 IEC 0 4662 PAS 62825 Methods of measurement and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 2013 IEC 0 kHz to 30 MHz - Edition 1.0 4663 PAS 61076-3- Connectors for electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for 2013 IEC 0 119 unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments with frequencies up to 100 MHz - Ed 4664 TR 60919-1 Performance of high-voltage direct current (HVDC) systems with linecommutated converters - Part 1: Steady-state 2013 IEC 0 conditions - Edition 3.2 Consolidated Reprint 4665 TR 61156-1-5 Multicore and symmetrical pair/quad cables for digital communications Part 1-5: Correction procedures for the 2013 IEC 0 measurement results of return loss and input impedance - Edition 1.0 4666 TR 61200-52 Electrical installation guide Part 52: Selection and erection of electrical equipment Wiring systems - Edition 2.0 2013 IEC 0 4667 TR 61340-1 Electrostatics Part 1: Electrostatic phenomena Principles and measurements - Edition 1.0 2013 IEC 0 CORR 1 4668 TR 61439-0 Low-voltage switchgear and controlgear assemblies Part 0: Guidance to specifying assemblies - Edition 2.0 2013 IEC 0 4669 TR 61282-10 Fibre optic communication system design guides Part 10: Characterization of the quality of optical vector-modulated 2013 IEC 0 signals with the error vector magnitude - Edition 1.0 4670 TR 61282-10 Fibre optic communication system design guides Part 10: Characterization of the quality of optical vector-modulated 2013 IEC 0 CORR 1 signals with the error vector magnitude - Edition 1.0 4671 TR 61282-4(2 NULL 2013 IEC 0 4672 TR 61282-4(3 NULL 2013 IEC 0 4673 TR 61292-9 Optical amplifiers Part 9: Semiconductor optical amplifiers (SOAs) - Edition 1.0 2013 IEC 0 4674 TR 61850-90-7 Communication networks and systems for power utility automation Part 90-7: Object models for power converters in 2013 IEC 0 distributed energy resources (DER) systems - Edition 1.0 4675 TR 61850-90-4 Communication networks and systems for power utility automation Part 90-4: Network engineering guidelines - Edition 2013 IEC 0 1.0 4676 TR 61850-1 Communication networks and systems for power utility automation Part 1: Introduction and overview - Edition 2.0 2013 IEC 0 4677 TR 62493-1 Assessment of lighting equipment related to human exposure to electromagnetic fields Part 1: Results of the EMF 2013 IEC 0 measurement campaign from the VDE Test and Certification Institute and ZVEI, the German Electrical and Electronic Manufacturers' Association - 4678 TR 62543 NULL 2013 IEC 0 EDITION 1.1 4679 TR 62543(2 NULL 2013 IEC 0 4680 TR 62543(3 NULL 2013 IEC 0 4681 TR 62543(4 NULL 2013 IEC 0 4682 TR 62543(5 NULL 2013 IEC 0 4683 TR 62547 Guidelines for the measurement of high-power damage sensitivity of singlemode fibre to bends Guidance for the 2013 IEC 0 interpretation of results - Edition 2.0 4684 TR 62572-4 Fibre optic active components and devices Reliability standards Part 4: Guidelines for optical connector end-face cleaning 2013 IEC 0 methods for receptacle style optical transceivers - Edition 1.0 4685 TR 62343-6-2(2 NULL 2013 IEC 0 4686 TR 62343-6-2(3 NULL 2013 IEC 0 4687 TR 62240-1 Process management for avionics Electronic components capability in operation Part 1: Temperature uprating - Edition 2013 IEC 0 1.0 4688 TS 62257-1(2 NULL 2013 IEC 0 4689 TS 62224 2013 NULL 2013 IEC 0 4690 TS 62224(2 NULL 2013 IEC 0 4691 TS 62224(3 NULL 2013 IEC 0 4692 TS 62224(4 NULL 2013 IEC 0 4693 TS 62224(5 NULL 2013 IEC 0 4694 TS 61340-4-2 Electrostatics Part 4-2: Standard test methods for specific applications Electrostatic properties of garments - Edition 1.0 2013 IEC 0 4695 TS 60870-5-7 Telecontrol equipment and systems Part 5-7: Transmission protocols Security extensions to IEC 60870-5-101 and IEC 2013 IEC 0 60870-5-104 protocols (applying IEC 62351) - Edition 1.0 4696 TS 60034-2-3 Rotating electrical machines Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC 2013 IEC 0 induction motors - Edition 1.0 4697 TS 60076-19 Power transformers Part 19: Rules for the determination of uncertainties in the measurement of the losses on power 2013 IEC 0 transformers and reactors - Edition 1.0 4698 TS 60079-32-1 Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance - Edition 1.0 2013 IEC 0 4699 TR 62856 Documentation on design automation subjects The Birdâ__s-eye View of Design Languages (BVDL) - Edition 1.0 2013 IEC 0 4700 TS 60479-1 NULL 2013 IEC 0 CORR 2 4701 TS 60695-6-30 NULL 2013 IEC 0 4702 TS 60695-6-31 NULL 2013 IEC 0 4703 TR 62795 Interoperation guide for field device tool (FDT) / device type manager (DTM) and electronic device description language 2013 IEC 0 (EDDL) - Edition 1.0 4704 TR 62797 International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and 2013 IEC 0 superconducting quantum interference device (SQUID) magnetometers - Edition 1.0 4705 TR 62799 Models for evaluation of thermal hazard in medical diagnostic ultrasonic fields - Edition 1.0 2013 IEC 0 4706 TR 62809 Summary of requirements and tests for products in the scope of IEC 60601-2-66 - Edition 1.0 2013 IEC 0 4707 TR 62834 IEC nanoelectronics standardization roadmap - Edition 1.0 2013 IEC 0 4708 TR 62836 Measurement of internal electric field in insulating materials Pressure wave propagation method - Edition 1.0 2013 IEC 0 4709 TR 62837 Energy efficiency through automation systems - Edition 1.0 2013 IEC 0 4710 TR 62785 Guidance on the environmentally conscious design of fibre optics related products and subsystems - Edition 1.0 2013 IEC 0 4711 TR 62725 Analysis of quantification methodologies for greenhouse gas emissions for electrical and electronic products and systems - 2013 IEC 0 Edition 1.0 4712 TR 62869 Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and 2013 IEC 0 equipment - Edition 1.0 4713 TR 62713 Safety procedures for reduction of risk outside a structure - Edition 1.0 2013 IEC 0 4714 TR 62627-05 Fibre optic interconnecting devices and passive components - Part 05: Investigation on impact of contamination and 2013 IEC 0 scratches on optical performance of single-mode (SM) and multimode (MM) connectors - Edition 1.0 4715 TR 62632 Nanoscale electrical contacts and interconnects - Edition 1.0 2013 IEC 0 4716 TR 62627-03- Fibre optic interconecting devices and passive components Part 03-03: Reliability Report on high-power reliability for 2013 IEC 0 03 metal-doped optical fibre plug-style optical attenuators - Edition 1.0 4717 TR 62627-03- Fibre optic interconecting devices and passive components - Part 03-04: Reliability - Guideline for high power reliability of 2013 IEC 0 04 passive optical components - Edition 1.0 4718 TR 62655 Tutorial and application guide for high-voltage fuses - Edition 1.0 2013 IEC 0 4719 TR 62658 Roadmap of optical circuit boards and their related packaging technologies - Edition 1.0 2013 IEC 0 4720 TS 62600-200 Marine energy Wave, tidal and other water current converters Part 200: Electricity producing tidal energy converters 2013 IEC 0 Power performance assessment - Edition 1.0 4721 TS 62647-21 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 21: Program 2013 IEC 0 management Systems engineering guidelines for managing the transition to lead-free electronics - Edition 1.0 4722 TS 62647-22 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 22: Technical 2013 IEC 0 guidelines - Edition 1.0 4723 TS 62647-23 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework 2013 IEC 0 and repair guidance to address the implications of lead-free electronics and mixed assemblies - Edition 1.0 4724 TS 62763 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire IEC/ - Edition 2013 IEC 0 1.0 4725 TS 62672-1 Reliability and availability evaluation of HVDC systems Part 1: HVDC systems with line commutated converters - Edition 2013 IEC 0 1.0 4726 TS 62720 Identification of units of measurement for computer-based processing - Edition 2.0 2013 IEC 0 4727 TS 62656-2 Standardized product ontology register and transfer by spreadsheets Part 2: Application guide for use with the IEC 2013 IEC 0 common data dictionary (CDD) - Edition 1.0 4728 TS 62661-2-1 Optical backplanes Product specification Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right 2013 IEC 0 angle optical connectors - Edition 1.0 4729 TS 62492-2 Industrial process control devices Radiation thermometers Part 2: Determination of the technical data for radiation 2013 IEC 0 thermometers - Edition 1.0 4730 TS 62548 NULL 2013 IEC 0 4731 TS 62344 Design of earth electrode stations for high-voltage direct current (HVDC) links General guidelines - Edition 1.0 2013 IEC 0 4732 TS 62351-5 Power systems management and associated information exchange Data and communications security Part 5: Security for 2013 IEC 0 IEC 60870-5 and derivatives - Edition 2.0 4733 TS 62282-1(2 NULL 2013 IEC 0 4734 TS 62282-1(3 NULL 2013 IEC 0 4735 TS 62271-210 High-voltage switchgear and controlgear Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed 2013 IEC 0 switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV - Edition 1.0 4736 TS 62257-1(3 NULL 2013 IEC 0 4737 TS 62257-9-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems Selection 2013 IEC 0 of stand-alone lighting kits for rural electrification - Edition 3.0 4738 TS 62850 Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements for 2013 IEC 0 equipment intended to be used in educational establishments by children - Edition 1.0 4739 TS 62796 NULL 2013 IEC 0 4740 60549 High-voltage fuses for the external protection of shunt capacitors - Edition 2.0 2013 IEC 0 4741 60584-1(2 NULL 2013 IEC 0 4742 60584-1(3 NULL 2013 IEC 0 4743 60529(2 NULL 2013 IEC 0 4744 60529(3 NULL 2013 IEC 0 4745 60544-1(2 NULL 2013 IEC 0 4746 60601-1 INT 3 NULL 2013 IEC 0 4747 60601-1-6(2 NULL 2013 IEC 0 4748 60601-1-6(3 NULL 2013 IEC 0 4749 60601-1-10(2 NULL 2013 IEC 0 4750 60601-1-10(3 NULL 2013 IEC 0 4751 60598-2-8 Luminaires Part 2-8: Particular requirements Handlamps - Edition 3.0 2013 IEC 0 4752 60598-2-24(2 NULL 2013 IEC 0 4753 60598-2-24(3 NULL 2013 IEC 0 4754 60598-2-11 Luminaires Part 2-11: Particular requirements Aquarium luminaires - Edition 2.0 2013 IEC 0 4755 60598-2-12 Luminaires Part 2-12: Particular requirements Mains socket-outlet mounted nightlights - Edition 2.0 2013 IEC 0 4756 60598-2-18 Luminaires Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications - Edition 2013 IEC 0 CORR 1 2.0 4757 60601-2-33 Medical electrical equipment Part 2-33: Particular requirements for the basic safety and essential performance of magnetic 2013 IEC 0 resonance equipment for medical diagnosis - Edition 3.2 Consolidated Reprint 4758 60601-2-41(2 NULL 2013 IEC 0 4759 60601-2-41(3 NULL 2013 IEC 0 4760 60601-2-17(2 NULL 2013 IEC 0 4761 60601-2-17(3 NULL 2013 IEC 0 4762 60601-1-3 Medical electrical equipment Part 1-3: General requirements for basic safety and essential performance Collateral 2013 IEC 0 Standard: Radiation protection in diagnostic X-ray equipment - Edition 2.1 Consolidated Reprint 4763 60601-1-9 NULL 2013 IEC 0 AMD 1 4764 60601-1-9(2 NULL 2013 IEC 0 4765 60601-1-9(3 NULL 2013 IEC 0 4766 60601-2-20 NULL 2013 IEC 0 CORR 2 4767 60601-2-11 Medical electrical equipment Part 2-11: Particular requirements for the basic safety and essential performance of gamma 2013 IEC 0 beam therapy equipment - Edition 3.0 4768 60601-2-21 NULL 2013 IEC 0 CORR 1 4769 60627(2 NULL 2013 IEC 0 4770 60627(3 NULL 2013 IEC 0 4771 60617 Graphical symbols for diagrams 2013 IEC 0 DATABASE SNAPSHOTS 4772 60601-2-62 Medical electrical equipment Part 2-62: Particular requirements for the basic safety and essential performance of high 2013 IEC 0 intensity therapeutic ultrasound (HITU) equipment - Edition 1.0 4773 60519-12 Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared 2013 IEC 0 electroheating - Edition 2.0 4774 60519-4(2 NULL 2013 IEC 0 4775 60519-4(3 NULL 2013 IEC 0 4776 60519-10 Safety in electroheating installations Part 10: Particular requirements for electrical resistance trace heating systems for 2013 IEC 0 industrial and commercial applications - Edition 2.0 4777 60529 CORR NULL 2013 IEC 0 1(2 4778 60529 CORR NULL 2013 IEC 0 1(3 4779 60512-28-100 Connectors for electronic equipment Tests and measurements Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 2013 IEC 0 60603-7 and IEC 61076-3 series connectors Tests 28a to 28g - Edition 1.0 4780 60444-6(2 NULL 2013 IEC 0 4781 60444-6(3 NULL 2013 IEC 0 4782 60464-1(2 NULL 2013 IEC 0 4783 60464-1(3 NULL 2013 IEC 0 4784 60469 Transitions, pulses and related waveforms Terms, definitions and algorithms - Edition 1.0 2013 IEC 0 4785 60455-3-8 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 8: 2013 IEC 0 Resins for cable accessories - Edition 1.0 4786 60494-2(2 NULL 2013 IEC 0 4787 60494-2(3 NULL 2013 IEC 0 4788 60494-1(2 NULL 2013 IEC 0 4789 60494-1(3 NULL 2013 IEC 0 4790 60507(2 NULL 2013 IEC 0 4791 60507(3 NULL 2013 IEC 0 4792 60350-1 CORR NULL 2013 IEC 0 2 4793 60352-2 2013 NULL 2013 IEC 0 4794 60352-2(2 NULL 2013 IEC 0 4795 60352-2(3 NULL 2013 IEC 0 4796 60358-1 CORR Coupling capacitors and capacitor dividers Part 1: General rules - Edition 1.0 2013 IEC 0 1 4797 60358-2 Coupling capacitors and capacitor dividers Part 2: AC or DC single-phase coupling capacitor connected between line and 2013 IEC 0 ground for power line carrier-frequency (PLC) application - Edition 1.0 4798 60358-3 Coupling capacitors and capacitor dividers Part 3: AC or DC coupling capacitor for harmonic-filters applications - Edition 2013 IEC 0 1.0 4799 60384-14 Fixed capacitors for use in electronic equipment Part 14: Sectional specification Fixed capacitors for electromagnetic 2013 IEC 0 interference suppression and connection to the supply mains - Edition 4.1; Consolidated Reprint 4800 60364-7-713 Low-voltage electrical installations Part 7-713: Requirements for special installations or locations Furniture - Edition 2.0 2013 IEC 0 4801 60368-1 Piezoelectric filters of assessed quality Part 1: Generic specification - Edition 4.1 Consolidated Reprint 2013 IEC 0 4802 60404-8-4 Magnetic materials Part 8-4: Specifications for individual materials Cold-rolled non-oriented electrical steel strip and 2013 IEC 0 sheet delivered in the fully-processed state - Edition 3.0 4803 60422 Mineral insulating oils in electrical equipment Supervision and maintenance guidance - Edition 4.0 2013 IEC 0 4804 60422 CORR 1 Mineral insulating oils in electrical equipment Supervision and maintenance guidance - Edition 4.0 2013 IEC 0 4805 60417 Database Snapshot - Graphical symbols for use on equipment 2013 IEC 0 DATABASE SNAPSHOTS 4806 60335-2-76 Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers - 2013 IEC 0 Edition 2.2 Consolidated Reprint 4807 60335-2-76 Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers - 2013 IEC 0 CORR 1 Edition 2.2 4808 60335-2-84(2 NULL 2013 IEC 0 4809 60335-2-84(3 NULL 2013 IEC 0 4810 60335-2-9 NULL 2013 IEC 0 CORR 1 4811 60335-2-70 Household and similar electrical appliances Safety Part 2-70: Particular requirements for milking machines - Edition 2.2 2013 IEC 0 Consolidated Reprint 4812 60335-2-21 Household and similar electrical appliances Safety Part 2-21: Particular requirements for storage water heaters - Edition 2013 IEC 0 CORR 1 6.0 4813 60335-2-110 Household and similar electrical appliances Safety Part 2-110: Particular requirements for commercial microwave 2013 IEC 0 appliances with insertion or contacting applicators - Edition 1.0 4814 60335-2-109(3 NULL 2013 IEC 0 4815 60335-2-40(3 NULL 2013 IEC 0 4816 60335-2-32(2 NULL 2013 IEC 0 4817 60335-2-32(3 NULL 2013 IEC 0 4818 60335-2-40(2 NULL 2013 IEC 0 4819 60317-49 Specifications for particular types of winding wires Part 49: Glass-fibre wound high temperature resin or varnish 2013 IEC 0 CORR 1 impregnated, bare or enamelled round copper wire, temperature index 180 - Edition 2.0 4820 60317-47(2 NULL 2013 IEC 0 4821 60317-47(3 NULL 2013 IEC 0 4822 60317-55(2 NULL 2013 IEC 0 4823 60317-55(3 NULL 2013 IEC 0 4824 60317-46(2 NULL 2013 IEC 0 4825 60317-46(3 NULL 2013 IEC 0 4826 60317-37(2 NULL 2013 IEC 0 4827 60317-37(3 NULL 2013 IEC 0 4828 60317-36(2 NULL 2013 IEC 0 4829 60317-36(3 NULL 2013 IEC 0 4830 60317-38(2 NULL 2013 IEC 0 4831 60317-38(3 NULL 2013 IEC 0 4832 60317-20(2 NULL 2013 IEC 0 4833 60317-20(3 NULL 2013 IEC 0 4834 60317-23(2 NULL 2013 IEC 0 4835 60317-23(3 NULL 2013 IEC 0 4836 60317-21(2 NULL 2013 IEC 0 4837 60317-21(3 NULL 2013 IEC 0 4838 60317-28(2 NULL 2013 IEC 0 4839 60317-28(3 NULL 2013 IEC 0 4840 60317-27(2 NULL 2013 IEC 0 4841 60317-27(3 NULL 2013 IEC 0 4842 60317-35(2 NULL 2013 IEC 0 4843 60317-35(3 NULL 2013 IEC 0 4844 60335-2-109(2 NULL 2013 IEC 0 4845 60335-2-105(3 NULL 2013 IEC 0 4846 60335-2-105 NULL 2013 IEC 0 2013 4847 60335-2-105(2 NULL 2013 IEC 0 4848 60335-1(2 NULL 2013 IEC 0 4849 60335-1(3 NULL 2013 IEC 0 4850 60061-1 AMD Amendment 49 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2013 IEC 0 49 caps - Edition 3.35 4851 60061-2 AMD Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2013 IEC 0 46 Lampholders - Edition 3.32 4852 60061-2 AMD Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2013 IEC 0 47 Lampholders - Edition 3.47 4853 60061-3 AMD Amendment 47 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2013 IEC 0 47 - Edition 3.47 4854 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps 2013 IEC 0 DATABASE SNAPSHOT 4855 60061-2 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders 2013 IEC 0 DATABASE SNAPSHOT 4856 60050-901 International electrotechnical vocabulary Part 901: Standardization - Edition 1.0 2013 IEC 0 4857 60050-902 International electrotechnical vocabulary Part 902: Conformity assessment - Edition 1.0 2013 IEC 0 4858 60050-903 International Electrotechnical Vocabulary Part 903: Risk assessment - Edition 1.0 2013 IEC 0 4859 60050-131 AMENDMENT 2 International Electrotechnical Vocabulary Part 131: Circuit theory - Edition 2.0 2013 IEC 0 AMD 2 4860 60050-151 AMENDMENT 1 International Electrotechnical Vocabulary Part 151: Electrical and magnetic devices - Edition 2.0 2013 IEC 0 AMD 1 4861 60050-351(2 NULL 2013 IEC 0 4862 60050-351(3 NULL 2013 IEC 0 4863 60081 AMD 5 AMENDMENT 5 Double-capped fluorescent lamps Performance specifications - Edition 5.1 2013 IEC 0 4864 60092-501(2 NULL 2013 IEC 0 4865 60092-501(3 NULL 2013 IEC 0 4866 60079-31(2 NULL 2013 IEC 0 4867 60079-31(3 NULL 2013 IEC 0 4868 60079-14(2 NULL 2013 IEC 0 4869 60079-14(3 NULL 2013 IEC 0 4870 60079-17(2 NULL 2013 IEC 0 4871 60079-17(3 NULL 2013 IEC 0 4872 60068-2-55 Environmental testing Part 2-55: Tests Test Ee and guidance Loose cargo testing including bounce - Edition 2.0 2013 IEC 0 4873 60068-2-57 Environmental testing Part 2-57: Tests Test Ff: Vibration Time-history and sine-beat method - Edition 3.0 2013 IEC 0 4874 60061-4 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: Guidelines and general 2013 IEC 0 DATABASE information SNAPSHOT 4875 60061-3 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2013 IEC 0 DATABASE SNAPSHOT 4876 60068-1(2 NULL 2013 IEC 0 4877 60068-1(3 NULL 2013 IEC 0 4878 60076-3(2 NULL 2013 IEC 0 4879 60076-3(3 NULL 2013 IEC 0 4880 60079-0 CORR NULL 2013 IEC 0 2 4881 60079-0 INT 1 NULL 2013 IEC 0 4882 60076-14 Power transformers Part 14: Liquid-immersed power transformers using high-temperature insulation materials - Edition 2013 IEC 0 1.0 4883 60068-2-65 Environmental testing Part 2-65: Tests Test Fg: Vibration Acoustically induced method - Edition 2.0 2013 IEC 0 4884 60127-7 Miniature fuses Part 7: Miniature fuse-links for special applications - Edition 2.0 2013 IEC 0 4885 60099-5 Surge arresters Part 5: Selection and application recommendations - Edition 2.0 2013 IEC 0 4886 60269-2(2 NULL 2013 IEC 0 4887 60269-2(3 NULL 2013 IEC 0 4888 60269-3 Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household 2013 IEC 0 and similar applications) Examples of standardized systems of fuses A to F - Edition 4.1 Consolidated Reprint 4889 60269-3 AMD Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household 2013 IEC 0 1 CORR 2 and similar applications) - Examples of standardized systems of fuses A to F - Edition 4.1 4890 60269-3 CORR Low voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household 2013 IEC 0 1 and similar applications) Examples of standardized systems of fuses A to F - Edition 4.1 4891 60286-3 Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes - 2013 IEC 0 Edition 5.0 4892 60286-4(2 NULL 2013 IEC 0 4893 60286-4(3 NULL 2013 IEC 0 4894 60268-3 Sound system equipment Part 3: Amplifiers - Edition 4.0 2013 IEC 0 4895 60317-0-3(2 NULL 2013 IEC 0 4896 60317-0-3(3 NULL 2013 IEC 0 4897 60317-0-2(2 NULL 2013 IEC 0 4898 60317-0-2(3 NULL 2013 IEC 0 4899 60317-0-1(2 NULL 2013 IEC 0 4900 60317-0-1(3 NULL 2013 IEC 0 4901 60216-1 Electrical insulating materials Thermal endurance properties Part 1: Ageing procedures and evaluation of test results - 2013 IEC 0 Edition 6.0 4902 60216-8 Electrical insulating materials Thermal endurance properties Part 8: Instructions for calculating thermal endurance 2013 IEC 0 characteristics using simplified procedures - Edition 1.0 4903 60204-31 Safety of machinery Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing 2013 IEC 0 machines, units and systems - Edition 4.0 4904 60252-1(2 NULL 2013 IEC 0 4905 60252-1(3 NULL 2013 IEC 0 4906 60252-2(2 NULL 2013 IEC 0 4907 60252-2(3 NULL 2013 IEC 0 4908 60255-149 Measuring relays and protection equipment Part 149: Functional requirements for thermal electrical relays - Edition 1.0 2013 IEC 0 4909 60255-24 Measuring relays and protection equipment Part 24: Common format for transient data exchange (COMTRADE) for 2013 IEC 0 power systems - Edition 2.0 4910 60255-26 Measuring relays and protection equipment Part 26: Electromagnetic compatibility requirements - Edition 3.0 2013 IEC 0 4911 60243-1 Electric strength of insulating materials Test methods Part 1: Tests at power frequencies - Edition 3.0 2013 IEC 0 4912 60243-3(2 NULL 2013 IEC 0 4913 60243-3(3 NULL 2013 IEC 0 4914 60243-2(2 NULL 2013 IEC 0 4915 60243-2(3 NULL 2013 IEC 0 4916 60810 Lamps for road vehicles Performance requirements - Edition 4.1 Consolidated Reprint 2013 IEC 0 4917 60794-2-20(2 NULL 2013 IEC 0 4918 60794-2-20(3 NULL 2013 IEC 0 4919 60794-1-2 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance - Edition 4.0 2013 IEC 0 4920 60819-3-4(2 NULL 2013 IEC 0 4921 60819-3-4(3 NULL 2013 IEC 0 4922 60848 GRAFCET specification language for sequential function charts - Edition 3.0 2013 IEC 0 4923 60838-2-1 Miscellaneous lampholders Part 2-1: Particular requirements - Lampholders S14 - Edition 1.0 2013 IEC 0 AMD 2 CORR 1 4924 60839-11-1 Alarm and electronic security systems Part 11-1: Electronic access control systems System and components requirements 2013 IEC 0 - Edition 1.0 4925 60851-3(2 NULL 2013 IEC 0 4926 60851-3(3 NULL 2013 IEC 0 4927 60974-2 Arc welding equipment Part 2: Liquid cooling systems - Edition 3.0 2013 IEC 0 4928 60974-3(2 NULL 2013 IEC 0 4929 60974-3(3 NULL 2013 IEC 0 4930 60974-5 Arc welding equipment Part 5: Wire feeders - Edition 3.0 2013 IEC 0 4931 60974-7 Arc welding equipment Part 7: Torches - Edition 3.0 2013 IEC 0 4932 60987 Nuclear power plants Instrumentation and control important to safety Hardware design requirements for computer-based 2013 IEC 0 systems - Edition 2.1 Consolidated Reprint 4933 60947-5-3(2 NULL 2013 IEC 0 4934 60947-5-3(3 NULL 2013 IEC 0 4935 60947-7-4 Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment PCB terminal blocks for copper conductors - 2013 IEC 0 Edition 1.0 4936 60947-6-1(2 NULL 2013 IEC 0 4937 60947-6-1(3 NULL 2013 IEC 0 4938 60950-1 Information technology equipment Safety Part 1: General requirements - Edition 2.2 Consolidated Reprint 2013 IEC 0 4939 60950-1 CORR Information technology equipment Safety Part 1: General requirements - Edition 2.0 2013 IEC 0 2 4940 60952-2(2 NULL 2013 IEC 0 4941 60952-2(3 NULL 2013 IEC 0 4942 60952-1(2 NULL 2013 IEC 0 4943 60952-1(3 NULL 2013 IEC 0 4944 60952-3(2 NULL 2013 IEC 0 4945 60952-3(3 NULL 2013 IEC 0 4946 60947-2 Low-voltage switchgear and controlgear Part 2: Circuit-breakers - Edition 5.0 2013 IEC 0 4947 60934 Circuit-breakers for equipment (CBE) - Edition 3.2 Consolidated Reprint 2013 IEC 0 4948 60913 Railway applications Fixed installations Electric traction overhead contact lines - Edition 2.0 2013 IEC 0 4949 60927(2 NULL 2013 IEC 0 4950 60927(3 NULL 2013 IEC 0 4951 60909-3 CORR Short-circuit currents in three-phase a.c. systems Part 3: Currents during two separate simultaneous line-to-earth short 2013 IEC 0 1 circuits and partial shortcircuit currents flowing through earth - Edition 3.0 4952 60884-1 Plugs and socket-outlets for household and similar purposes Part 1: General requirements - Edition 3.2 Consolidated 2013 IEC 0 Reprint 4953 60884-2-7 Plugs and socket-outlets for household and similar purposes Part 2-7: Particular requirements for cord extension sets - 2013 IEC 0 Edition 1.1 Consolidated Reprint 4954 60884-2-7 Plugs and socket-outlets for household and similar purposes Part 2-7: Particular requirements for cord extension sets 2013 IEC 0 AMD 1 CORR CORRIGENDUM 1 - Edition 1.1 1 4955 60743(2 NULL 2013 IEC 0 4956 60743(3 NULL 2013 IEC 0 4957 60730-2-5(2 NULL 2013 IEC 0 4958 60730-2-5(3 NULL 2013 IEC 0 4959 60730-1(2 NULL 2013 IEC 0 4960 60730-1(3 NULL 2013 IEC 0 4961 60747-16-5 Semiconductor devices Part 16-5: Microwave integrated circuits Oscillators - Edition 1.0 2013 IEC 0 4962 60747-3(2 NULL 2013 IEC 0 4963 60747-3(3 NULL 2013 IEC 0 4964 60747-5-5 Semiconductor devices Discrete devices Part 5-5: Optoelectronic devices Photocouplers - Edition 1.1 Consolidated 2013 IEC 0 Reprint 4965 60754-1 CORR Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content - 2013 IEC 0 1 Edition 3.0 4966 60749-26 Semiconductor devices Mechanical and climatic test methods Part 26: Electrostatic discharge (ESD) sensitivity testing 2013 IEC 0 Human body model (HBM) - Edition 3.0 4967 60793-1-42 Optical fibres Part 1-42: Measurement methods and test procedures Chromatic dispersion - Edition 3.0 2013 IEC 0 4968 60695-1-40 Fire hazard testing Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids - 2013 IEC 0 Edition 1.0 4969 60695-2-10 Fire hazard testing Part 2-10: Glowing/hot-wire based test methods Glow-wire apparatus and common test procedure - 2013 IEC 0 Edition 2.0 4970 60695-11-10 Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods - Edition 2.0 2013 IEC 0 4971 60695-11-2(2 NULL 2013 IEC 0 4972 60695-11-2(3 NULL 2013 IEC 0 4973 60695-9-1 Fire hazard testing Part 9-1: Surface spread of flame General guidance - Edition 3.0 2013 IEC 0 4974 60704-2-14 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-14: 2013 IEC 0 Particular requirements for refrigerators, frozen-food storage cabinets and food freezers - Edition 2.0 4975 60721-2-1(2 NULL 2013 IEC 0 4976 60721-2-1(3 NULL 2013 IEC 0 4977 60721-2-3(2 NULL 2013 IEC 0 4978 60721-2-3(3 NULL 2013 IEC 0 4979 60684-3-216(2 NULL 2013 IEC 0 4980 60684-3-216(3 NULL 2013 IEC 0 4981 60684-3-214(2 NULL 2013 IEC 0 4982 60684-3-214(3 NULL 2013 IEC 0 4983 60688 CORR 1 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals - Edition 2013 IEC 0 3.0 4984 60684-3-280(2 NULL 2013 IEC 0 4985 60684-3-280(3 NULL 2013 IEC 0 4986 60684-3-283(2 NULL 2013 IEC 0 4987 60684-3-283(3 NULL 2013 IEC 0 4988 60669-2-5 Switches for household and similar fixed electrical installations Part 2-5: Particular requirements Switches and related 2013 IEC 0 accessories for use in home and building electronic systems (HBES) - Edition 1.0 4989 61231 2013 NULL 2013 IEC 0 4990 61231(2 NULL 2013 IEC 0 4991 61231(3 NULL 2013 IEC 0 4992 61212-3-1 Insulating materials Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes 2013 IEC 0 Part 3: Specifications for individual materials Sheet 1: Round laminated rolled tubes - Edition 3.0 4993 61212-3-2 Insulating materials Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes 2013 IEC 0 Part 3: Specifications for individual materials Sheet 2: Round laminated moulded tubes - Edition 3.0 4994 61207-7 Expression of performance of gas analyzers Part 7: Tuneable semiconductor laser gas analyzers - Edition 1.0 2013 IEC 0 4995 61193-3 Quality assessment systems Part 3: Selection and use of sampling plans for printed board and laminate endproduct and in- 2013 IEC 0 process auditing - Edition 1.0 4996 61191-1 Printed board assemblies Part 1: Generic specification Requirements for soldered electrical and electronic assemblies 2013 IEC 0 using surface mount and related assembly technologies - Edition 2.0 4997 61191-2 Printed board assemblies Part 2: Sectional specification Requirements for surface mount soldered assemblies - Edition 3.0 2013 IEC 0 4998 61169-26 Radio-frequency connectors Part 26: Sectional specification for TNCA series RF coaxial connectors - Edition 1.0 2013 IEC 0 4999 61169-42 Radio-frequency connectors Part 42: Sectional specification for CQN series quick lock RF coaxial connectors - Edition 1.0 2013 IEC 0 5000 61169-43 Radio-frequency connectors Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors - 2013 IEC 0 Edition 1.0 5001 61189-11 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 11: 2013 IEC 0 Measurement of melting temperature or melting temperature ranges of solder alloys - Edition 1.0 5002 61300-3-25(3 NULL 2013 IEC 0 5003 61300-3-25(2 NULL 2013 IEC 0 5004 61300-3-48 Fibre optic interconnect devices and passive components Basic test and measurement procedures Part 3-48: Examinations 2013 IEC 0 and measurements Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors - Edition 1.0 5005 61300-3-49 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-49: 2013 IEC 0 Examinations and measurements Guide pin retention force for rectangular ferrule multi-fibre connectors - Edition 1.0 5006 61300-3-50 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-50: 2013 IEC 0 Examinations and measurements Crosstalk for optical spatial switches - Edition 1.0 5007 61300-2-44 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests 2013 IEC 0 Flexing of the strain relief of fibre optic devices - Edition 3.0 5008 61300-2-7 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-7: Tests 2013 IEC 0 Bending moment - Edition 2.0 5009 61300-2-52 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-52: Tests 2013 IEC 0 Bending test for cords - Edition 1.0 5010 61326-3-2 INT NULL 2013 IEC 0 1 5011 61275 Radiation protection instrumentation Measurement of discrete radionuclides in the environment In situ photon 2013 IEC 0 spectrometry system using a germanium detector - Edition 2.0 5012 61280-1-1 Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication 2013 IEC 0 subsystems Transmitter output optical power measurement for single-mode optical fibre cable - Edition 2.0 5013 61249-4-18 Materials for printed boards and other interconnecting structures Part 4-18: Sectional specification set for prepreg 2013 IEC 0 materials, unclad (for the manufacture of multilayer boards) High performance epoxide woven E-glass prepreg of defined flammability (ver 5014 61249-4-19 Materials for printed boards and other interconnecting structures Part 4-19: Sectional specification set for prepreg 2013 IEC 0 materials, unclad (for the manufacture of multilayer boards) High performance non-halogenated epoxide woven E-glass prepreg of defined f 5015 61300-2-28 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-28: Tests 2013 IEC 0 CORR 1 Industrial atmosphere (sulphur dioxide) - Edition 2.0 5016 61300-2-28 NULL 2013 IEC 0 EDITION 2 5017 61300-2-28(2 NULL 2013 IEC 0 5018 61300-2-28(3 NULL 2013 IEC 0 5019 61300-2-28(4 NULL 2013 IEC 0 5020 61290-3-3 Optical amplifiers Test methods Part 3-3: Noise figure parameters Signal power to total ASE power ratio - Edition 1.0 2013 IEC 0 5021 61009-1(2 NULL 2013 IEC 0 5022 61009-1(3 NULL 2013 IEC 0 5023 61010-1 INT 1 NULL 2013 IEC 0 5024 61009-1 AMD AMENDMENT 2 Residual current operated circuit-breakers with integral overcurrent protection for household and similar 2013 IEC 0 2 uses (RCBOs) Part 1: General rules - Edition 3.2 5025 61008-1 AMD NULL 2013 IEC 0 2 5026 61008-1(2 NULL 2013 IEC 0 5027 61008-1(3 NULL 2013 IEC 0 5028 61000-4-6(2 NULL 2013 IEC 0 5029 61000-4-6(3 NULL 2013 IEC 0 5030 61000-3-3 Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in 2013 IEC 0 public low-voltage supply systems, for equipment with rated current â_¤ 16 A per phase and not subject to conditional connection - Ed 5031 61034-2(2 NULL 2013 IEC 0 5032 61034-2(3 NULL 2013 IEC 0 5033 61034-2 2013 NULL 2013 IEC 0 5034 61034-1 2013 NULL 2013 IEC 0 5035 61034-1(2 NULL 2013 IEC 0 5036 61034-1(3 NULL 2013 IEC 0 5037 61010-2-201 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-201: Particular 2013 IEC 0 requirements for control equipment - Edition 2.0 5038 61083-2 Instruments and software used for measurement in high-voltage and highcurrent tests Part 2: Requirements for software for 2013 IEC 0 tests with impulse voltages and currents - Edition 2.0 5039 61124 CORR 1 Reliability testing Compliance tests for constant failure rate and constant failure intensity - Edition 3.0 2013 IEC 0 5040 61131-3 Programmable controllers Part 3: Programming languages - Edition 3.0 2013 IEC 0 5041 61131-9 Programmable controllers Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) - 2013 IEC 0 Edition 1.0 5042 61157 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment - Edition 2.1 2013 IEC 0 Consolidated Reprint 5043 61156-8 Multicore and symmetrical pair/quad cables for digital communications Part 8: Symmetrical pair/quad cables with 2013 IEC 0 transmission characteristics up to 1 200 MHz Work area wiring Sectional specification - Edition 1.1 Consolidated Reprint 5044 61169-1 NULL 2013 IEC 0 EDITION 2 5045 61169-1(2 NULL 2013 IEC 0 5046 61169-1(3 NULL 2013 IEC 0 5047 61169-1(4 NULL 2013 IEC 0 5048 61162-1 CORR NULL 2013 IEC 0 1 5049 61161 Ultrasonics Power measurement Radiation force balances and performance requirements - Edition 3.0 2013 IEC 0 5050 14543-3-10 NULL 2012 IEC 0 5051 61156-5 Multicore and symmetrical pair/quad cables for digital communications Part 5: Symmetrical pair/quad cables with 2012 IEC 0 transmission characteristics up to 1 000 MHz Horizontal floor wiring Sectional specification - Edition 2.1 Consolidated Reprint 5052 61156-5 AMD AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications Part 5: Symmetrical pair/quad 2012 IEC 0 1 cables with transmission characteristics up to 1 000 MHz Horizontal floor wiring Sectional specification - Edition 2.1 5053 61156-6 Multicore and symmetrical pair/quad cables for digital communications Part 6: Symmetrical pair/quad cables with 2012 IEC 0 transmission characteristics up to 1 000 MHz Work area wiring Sectional specification - Edition 3.1 Consolidated Reprint 5054 61156-7 Multicore and symmetrical pair/quad cables for digital communications Part 7: Symmetrical pair cables with transmission 2012 IEC 0 characteristics up to 1 200 MHz Sectional specification for digital and analog communication cables - Edition 1.1 Consolidated Reprin 5055 61131-6 Programmable controllers Part 6: Functional safety - Edition 1.0 2012 IEC 0 5056 61124 Reliability testing Compliance tests for constant failure rate and constant failure intensity - Edition 3.0 2012 IEC 0 5057 61097-6 Global maritime distress and safety system (GMDSS) Part 6: Narrowband direct-printing telegraph equipment for the 2012 IEC 0 reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) - Edition 2.1; Consolidated Reprint 5058 61121 Tumble dryers for household use Methods for measuring the performance - Edition 4.0 2012 IEC 0 5059 61097-4 Global maritime distress and safety system (GMDSS) Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group 2012 IEC 0 call (EGC) equipment Operational and performance requirements, methods of testing and required test results - Edition 3.1; Consolidated 5060 61097-15 Global maritime distress and safety system (GMDSS) Part 15: Inmarsat FB500 ship earth station Operational and 2012 IEC 0 performance requirements, methods of testing and required test results - Edition 1.0 5061 61094-8 Measurement microphones Part 8: Methods for determining the free-field sensitivity of working standard microphones by 2012 IEC 0 comparison - Edition 1.0 5062 61076-4-116 Connectors for electronic equipment Product requirements Part 4-116: Printed board connectors Detail specification for a 2012 IEC 0 high-speed two-part connector with integrated shielding function - Edition 1.1 Consolidated Reprint 5063 61076-2-101 Connectors for electronic equipment Product requirements Part 2-101: Circular connectors Detail specification for M12 2012 IEC 0 connectors with screw-locking - Edition 3.0 5064 61076-3-110 Connectors for electronic equipment Product requirements Part 3-110: Detail specification for free and fixed connectors 2012 IEC 0 for data transmission with frequencies up to 3 000 MHz - Edition 3.0 5065 61000-4-25 Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques HEMP immunity test methods for 2012 IEC 0 equipment and systems - Edition 1.1; Consolidated Reprint 5066 61010-2-091 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-091: Particular 2012 IEC 0 requirements for cabinet X-ray systems - Edition 1.0 5067 61056-1 General purpose lead-acid batteries (valve-regulated types) Part 1: General requirements, functional characteristics 2012 IEC 0 Methods of test - Edition 3.0 5068 61056-2 General purpose lead-acid batteries (valve-regulated types) Part 2: Dimensions, terminals and marking - Edition 3.0 2012 IEC 0 5069 61056-2 CORR General purpose lead-acid batteries (valveregulated types) Part 2: Dimensions, terminals and marking - Edition 3.0 2012 IEC 0 1 5070 61000-3-12 INT Electromagnetic compatibility (EMC) Part 3-12: Limits Limits for harmonic currents produced by equipment connected to 2012 IEC 0 public low-voltage systems with input current >16 A and â_¤75 A per phase - Edition 2.0 5071 61000-4-15 Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques Flickermeter Functional and 2012 IEC 0 CORR 1 design specifications - Edition 2.0 5072 61000-4-4 Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst 2012 IEC 0 immunity test - Edition 3.0 5073 61000-4-4 NULL 2012 IEC 0 (REDLINE) 5074 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) 2012 IEC 0 Part 1: General rules - Edition 3.2; Consolidated Reprint 5075 61009-1 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) 2012 IEC 0 Part 1: General rules - Edition 3.2; Consolidated Reprint 5076 61010-2-032 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-032: Particular 2012 IEC 0 requirements for hand-held and hand-manipulated current sensors for electrical test and measurement - Edition 3.0 5077 61010-2-033 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-033: Particular 2012 IEC 0 requirements for HAND-HELD MULTIMETERS and other METERS, for domestic and professional use, capable of measuring MAINS voltage - Edition 1.0 5078 61009-1 CORR NULL 2012 IEC 0 1 5079 61300-2-33 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-33: Tests 2012 IEC 0 Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures - Edition 3.0 5080 61300-2-19 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests 2012 IEC 0 Damp heat (steady state) - Edition 3.0 5081 61300-2-14 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests 2012 IEC 0 High optical power - Edition 3.0 5082 61300-2-10 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-10: Tests 2012 IEC 0 Crush resistance - Edition 2.0 5083 61300-2-11 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-11: Tests 2012 IEC 0 Axial compression - Edition 2.0 5084 61291-1 Optical amplifiers Part 1: Generic Specification - Edition 3.0 2012 IEC 0 5085 61291-2 Optical amplifiers Part 2: Single channel applications Performance specification template - Edition 4.0 2012 IEC 0 5086 61280-2-2 Fibre optic communication subsystem test procedures Part 2-2: Digital systems Optical eye pattern, waveform and 2012 IEC 0 extinction ratio measurement - Edition 4.0 5087 61326-1 Electrical equipment for measurement, control and laboratory use EMC requirements Part 1: General requirements - 2012 IEC 0 Edition 2.0 5088 61326-1 NULL 2012 IEC 0 (REDLINE) 5089 61326-2-1 Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-1: Particular requirements 2012 IEC 0 Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected ap 5090 61326-2-2 Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-2: Particular requirements 2012 IEC 0 Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-v 5091 61326-2-3 Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-3: Particular requirements 2012 IEC 0 Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning - Edit 5092 61326-2-4 Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-4: Particular requirements 2012 IEC 0 Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for 5093 61326-2-5 Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-5: Particular requirements 2012 IEC 0 Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784- 5094 61326-2-6 Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-6: Particular requirements In 2012 IEC 0 vitro diagnostic (IVD) medical equipment - Edition 2.0 5095 61300-2-46 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests 2012 IEC 0 CORR 1 Damp heat, cyclic - Edition 1.0 5096 61300-3-4 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-4: 2012 IEC 0 Examinations and measurements Attenuation - Edition 3.0 5097 61300-3-38 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-38: 2012 IEC 0 Examinations and measurements Group delay, chromatic dispersion and phase ripple - Edition 1.0 5098 61300-3-44 NULL 2012 IEC 0 5099 61300-3-33 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-33: 2012 IEC 0 Examinations and measurements Withdrawal force from a resilient alignment sleeve using gauge pins - Edition 2.0 5100 61300-3-28 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-28: 2012 IEC 0 Examinations and measurements Transient loss - Edition 2.0 5101 61184 CORR 2 NULL 2012 IEC 0 5102 61181 Mineral oil-filled electrical equipment Application of dissolved gas analysis (DGA) to factory tests on electrical equipment 2012 IEC 0 - Edition 2.1 Consolidated Reprint 5103 61182-2-2 Printed board assembly products Manufacturing description data and transfer methodology Part 2-2: Sectional 2012 IEC 0 requirements for implementation of printed board fabrication data description - Edition 1.0 5104 61169-44 Radio-frequency connectors Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors - 2012 IEC 0 Edition 1.0 5105 61169-47 Radio-frequency connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, 2012 IEC 0 cable networks (type F-Quick) - Edition 2.0 _خ typically for use in 75 5106 61196-1-119 Coaxial communication cables Part 1-119: Electrical test methods RF power rating - Edition 1.0 2012 IEC 0 5107 61196-1-308 Coaxial communication cables Part 1-308: Mechanical test methods Test for tensile strength and elongation for copper- 2012 IEC 0 clad metals - Edition 2.0 5108 61195 Double-capped fluorescent lamps Safety specifications - Edition 2.2 Consolidated Reprint 2012 IEC 0 5109 61196-8 Coaxial communication cables Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) 2012 IEC 0 dielectric - Edition 1.0 5110 61196-8-1 Coaxial communication cables Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene 2012 IEC 0 (PTFE) dielectric - Edition 1.0 5111 61196-8-2 Coaxial communication cables Part 8-2: Detail specification for 50-047 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5112 61196-8-3 Coaxial communication cables Part 8-3: Detail specification for 50-086 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5113 61196-8-4 Coaxial communication cables Part 8-4: Detail specification for 50-141 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5114 61196-8-5 Coaxial communication cables Part 8-5: Detail specification for 50-250 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5115 61196-8-6 Coaxial communication cables Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5116 61196-8-7 Coaxial communication cables Part 8-7: Detail specification for 75-086 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5117 61196-8-8 Coaxial communication cables Part 8-8: Detail specification for 75-141 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5118 61196-8-9 Coaxial communication cables Part 8-9: Detail specification for 75-250 type semi-flexible cables with solid 2012 IEC 0 polytetrafluoroethylene (PTFE) insulation - Edition 1.0 5119 61196-5 Coaxial communication cables Part 5: Sectional specification for CATV trunk and distribution cables - Edition 2.0 2012 IEC 0 5120 61196-5-1 Coaxial communication cables Part 5-1: Blank detail specification for CATV trunk and distribution cables - Edition 2.0 2012 IEC 0 5121 61199 Single-capped fluorescent lamps Safety specifications - Edition 3.2 Consolidated Reprint 2012 IEC 0 5122 61249-2-40 Materials for printed boards and other interconnecting structures Part 2-40: Reinforced base materials, clad and unclad 2012 IEC 0 High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad 5123 61249-2-39 Materials for printed boards and other interconnecting structures Part 2-39: Reinforced base materials clad and unclad 2012 IEC 0 High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad f 5124 61249-2-27 Materials for printed boards and other interconnecting structures Part 2-27: Reinforced base materials clad and unclad 2012 IEC 0 Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test 5125 61249-2-30 Materials for printed boards and other interconnecting structures Part 2-30: Reinforced base materials clad and unclad 2012 IEC 0 Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad - Edi 5126 61240 Piezoelectric devices Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and 2012 IEC 0 selection General rules - Edition 3.0 5127 60669-2-6 Switches for household and similar fixed electrical installations Part 2-6: Particular requirements Fireman's switches for 2012 IEC 0 exterior and interior signs and luminaires - Edition 1.0 5128 60669-1 INT 1 NULL 2012 IEC 0 5129 60645-1 Electroacoustics Audiometric equipment Part 1: Equipment for pure-tone and speech audiometry - Edition 4.0 2012 IEC 0 5130 60688 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals - Edition 2012 IEC 0 3.0 5131 60679-3 Quartz crystal controlled oscillators of assessed quality Part 3: Standard outlines and lead connections - Edition 3.0 2012 IEC 0 5132 60728-13-1 Cable networks for television signals, sound signals and interactive services Part 13-1: Bandwidth expansion for broadcast 2012 IEC 0 signal over FTTH system - Edition 1.0 5133 60728-3-1 Cable networks for television signals, sound signals and interactive services Part 3-1: Active wideband equipment for 2012 IEC 0 cable networks Methods of measurement of non-linearity for full digital channel load with DVB-C signals - Edition 1.0 5134 60704-2-6 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-6: 2012 IEC 0 Particular requirements for tumble dryers - Edition 3.0 5135 60717 Method for the determination of the space required by capacitors and resistors with unidirectional terminations - Edition 2.0 2012 IEC 0 5136 60721-2-2 Classification of environmental conditions Part 2-2: Environmental conditions appearing in nature Precipitation and wind 2012 IEC 0 - Edition 2.0 5137 60695-2-13 NULL 2012 IEC 0 CORR 1 5138 60695-2-13(2 NULL 2012 IEC 0 5139 60695-4 Fire hazard testing Part 4: Terminology concerning fire tests for electrotechnical products - Edition 4.0 2012 IEC 0 5140 60695-11-3 Fire hazard testing Part 11-3: Test flames 500 W flames Apparatus and confirmational test methods - Edition 1.0 2012 IEC 0 5141 60793-1-54 Optical fibres Part 1-54: Measurement methods and test procedures Gamma irradiation - Edition 2.0 2012 IEC 0 5142 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres - Edition 5.0 2012 IEC 0 5143 60793-2-30 Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres - Edition 4.0 2012 IEC 0 5144 60749-27 Semiconductor devices Mechanical and climatic test methods Part 27: Electrostatic discharge (ESD) sensitivity testing 2012 IEC 0 Machine model (MM) - Edition 2.1 Consolidated Reprint 5145 60745-2-23 Hand-held motor-operated electric tools Safety Part 2-23: Particular requirements for die grinders and small rotary tools - 2012 IEC 0 Edition 1.0 5146 60745-2-3 Hand-held motor-operated electric tools Safety Part 2-3: Particular requirements for grinders, polishers and disk-type 2012 IEC 0 sanders - Edition 2.2 Consolidated Reprint 5147 60734 Household electrical appliances Performance Water for testing - Edition 4.0 2012 IEC 0 5148 60893-3-3 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: 2012 IEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on melamine resins - Edition 2.1 Consolidated R 5149 60893-3-4 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: 2012 IEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins - Edition 2.1 Consolidated R 5150 60893-3-1 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-1: 2012 IEC 0 Specifications for individual materials Types of industrial rigid laminated sheets - Edition 3.0 5151 60876-1 Fibre optic interconnecting devices and passive components Fibre optic spatial switches Part 1: Generic specification - 2012 IEC 0 Edition 5.0 5152 60900 Live working Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. - Edition 3.0 2012 IEC 0 5153 60917-2-5 Modular order for the development of mechanical structures for electronic equipment practices Part 2-5: Sectional 2012 IEC 0 specification Interface co-ordination dimensions for the 25 mm equipment practice Cabinet interface dimensions for miscellaneous equipment 5154 60947-3 Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units 2012 IEC 0 - Edition 3.2 Consolidated Reprint 5155 60947-3 AMD NULL 2012 IEC 0 1 CORR 1 5156 60947-3 CORR NULL 2012 IEC 0 1 5157 60947-4-2 Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters AC semiconductor motor controllers and 2012 IEC 0 CORR 1 starters - Edition 3.0 5158 60947-4-1 Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters Electromechanical contactors and motor- 2012 IEC 0 starters - Edition 3.1 Consolidated Reprint 5159 60947-5-2 Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements Proximity switches - 2012 IEC 0 Edition 3.1 Consolidated Reprint 5160 60968 Self-ballasted fluorescent lamps for general lighting services Safety requirements - Edition 3.0 2012 IEC 0 5161 60974-1 Arc welding equipment - Part 1: Welding power sources - Edition 5.0 2012 IEC 0 5162 60869-1 Fibre optic interconecting devices and passive components Fibre optic passive power control devices Part 1: Generic 2012 IEC 0 specification - Edition 4.0 5163 60851-6 Winding wires Test methods Part 6: Thermal properties - Edition 3.0 2012 IEC 0 5164 60862-2 Surface acoustic wave (SAW) filters of assessed quality Part 2: Guidelines for the use - Edition 3.0 2012 IEC 0 5165 60838-2-2 Miscellaneous lampholders Part 2-2: Particular requirements Connectors for LED-modules - Edition 1.1 Consolidated 2012 IEC 0 Reprint 5166 60811-510 Electric and optical fibre cables Test methods for non-metallic materials Part 510: Mechanical tests Methods specific to 2012 IEC 0 polyethylene and polypropylene compounds Wrapping test after thermal ageing in air - Edition 1.0 5167 60811-511 Electric and optical fibre cables Test methods for non-metallic materials Part 511: Mechanical tests Measurement of the 2012 IEC 0 melt flow index of polyethylene compounds - Edition 1.0 5168 60811-512 Electric and optical fibre cables Test methods for non-metallic materials Part 512: Mechanical tests Methods specific to 2012 IEC 0 polyethylene and polypropylene compounds Tensile strength and elongation at break after conditioning at elevated temperature - Edi 5169 60811-513 Electric and optical fibre cables Test methods for non-metallic materials Part 513: Mechanical tests Methods specific to 2012 IEC 0 polyethylene and polypropylene compounds Wrapping test after conditioning - Edition 1.0 5170 60811-601 Electric and optical fibre cables Test methods for non-metallic materials Part 601: Physical tests Measurement of the drop 2012 IEC 0 point of filling compounds - Edition 1.0 5171 60811-602 Electric and optical fibre cables Test methods for non-metallic materials Part 602: Physical tests Separation of oil in 2012 IEC 0 filling compounds - Edition 1.0 5172 60811-603 Electric and optical fibre cables Test methods for non-metallic materials Part 603: Physical tests Measurement of total 2012 IEC 0 acid number of filling compounds - Edition 1.0 5173 60811-604 Electric and optical fibre cables Test methods for non-metallic materials Part 604: Physical tests Measurement of absence 2012 IEC 0 of corrosive components in filling compounds - Edition 1.0 5174 60811-605 Electric and optical fibre cables Test methods for non-metallic materials Part 605: Physical tests Measurement of carbon 2012 IEC 0 black and/or mineral filler in polyethylene compounds - Edition 1.0 5175 60811-606 Electric and optical fibre cables Test methods for non-metallic materials Part 606: Physical tests Methods for determining 2012 IEC 0 the density - Edition 1.0 5176 60811-607 Electric and optical fibre cables Test methods for non-metallic materials Part 607: Physical tests Test for the assessment 2012 IEC 0 of carbon black dispersion in polyethylene and polypropylene - Edition 1.0 5177 60811-501 Electric and optical fibre cables Test methods for non-metallic materials Part 501: Mechanical tests Tests for determining 2012 IEC 0 the mechanical properties of insulating and sheathing compounds - Edition 1.0 5178 60811-502 Electric and optical fibre cables Test methods for non-metallic materials Part 502: Mechanical tests Shrinkage test for 2012 IEC 0 insulations - Edition 1.0 5179 60811-503 Electric and optical fibre cables Test methods for non-metallic materials Part 503: Mechanical tests Shrinkage test for 2012 IEC 0 sheaths - Edition 1.0 5180 60811-504 Electric and optical fibre cables Test methods for non-metallic materials Part 504: Mechanical tests Bending tests at low 2012 IEC 0 temperature for insulation and sheaths - Edition 1.0 5181 60811-505 Electric and optical fibre cables Test methods for non-metallic materials Part 505: Mechanical tests Elongation at low 2012 IEC 0 temperature for insulations and sheaths - Edition 1.0 5182 60811-506 Electric and optical fibre cables Test methods for non-metallic materials Part 506: Mechanical tests Impact test at low 2012 IEC 0 temperature for insulations and sheaths - Edition 1.0 5183 60811-507 Electric and optical fibre cables Test methods for non-metallic materials Part 507: Mechanical tests Hot set test for cross- 2012 IEC 0 linked materials - Edition 1.0 5184 60811-508 Electric and optical fibre cables Test methods for non-metallic materials Part 508: Mechanical tests Pressure test at high 2012 IEC 0 temperature for insulation and sheaths - Edition 1.0 5185 60811-509 Electric and optical fibre cables Test methods for non-metallic materials Part 509: Mechanical tests Test for resistance of 2012 IEC 0 insulations and sheaths to cracking (heat shock test) - Edition 1.0 5186 60811-410 Electric and optical fibre cables - Test methods for non-metallic materials Part 410: Miscellaneous tests Test method for 2012 IEC 0 copper-catalyzed oxidative degradation of polyolefin insulated conductors - Edition 1.0 5187 60811-411 Electric and optical fibre cables Test methods for non-metallic materials Part 411: Miscellaneous tests Low-temperature 2012 IEC 0 brittleness of filling compounds - Edition 1.0 5188 60811-412 Electric and optical fibre cables Test methods for non-metallic materials Part 412: Miscellaneous tests Thermal ageing 2012 IEC 0 methods Ageing in an air bomb - Edition 1.0 5189 60811-301 Electric and optical fibre cables Test methods for non-metallic materials Part 301: Electrical tests Measurement of the 2012 IEC 0 C of filling compounds - Edition 1.0°آ permittivity at 23 5190 60811-302 Electric and optical fibre cables Test methods for non-metallic materials Part 302: Electrical tests Measurement of the d.c. 2012 IEC 0 C of filling compounds - Edition 1.0°آ C and 100°آ resistivity at 23 5191 60811-201 Electric and optical fibre cables Test methods for non-metallic materials Part 201: General tests Measurement of 2012 IEC 0 insulation thickness - Edition 1.0 5192 60811-202 Electric and optical fibre cables Test methods for non-metallic materials Part 202: General tests Measurement of 2012 IEC 0 thickness of non-metallic sheath - Edition 1.0 5193 60811-203 Electric and optical fibre cables Test methods for non-metallic materials Part 203: General tests Measurement of overall 2012 IEC 0 dimensions - Edition 1.0 5194 60811-401 Electric and optical fibre cables Test methods for non-metallic materials Part 401: Miscellaneous tests Thermal ageing 2012 IEC 0 methods Ageing in an air oven - Edition 1.0 5195 60811-402 Electric and optical fibre cables Test methods for non-metallic materials Part 402: Miscellaneous tests Water absorption 2012 IEC 0 tests - Edition 1.0 5196 60811-403 Electric and optical fibre cables Test methods for non-metallic materials Part 403: Miscellaneous tests Ozone resistance 2012 IEC 0 test on cross-linked compounds - Edition 1.0 5197 60811-404 Electric and optical fibre cables Test methods for non-metallic materials Part 404: Miscellaneous tests Mineral oil 2012 IEC 0 immersion tests for sheaths - Edition 1.0 5198 60811-405 Electric and optical fibre cables Test methods for non-metallic materials Part 405: Miscellaneous tests Thermal stability 2012 IEC 0 test for PVC insulations and PVC sheaths - Edition 1.0 5199 60811-406 Electric and optical fibre cables Test methods for non-metallic materials Part 406: Miscellaneous tests Resistance to stress 2012 IEC 0 cracking of polyethylene and polypropylene compounds - Edition 1.0 5200 60811-407 Electric and optical fibre cables Test methods for non-metallic materials Part 407: Miscellaneous tests Measurement of 2012 IEC 0 mass increase of polyethylene and polypropylene compounds - Edition 1.0 5201 60811-408 Electric and optical fibre cables Test methods for non-metallic materials Part 408: Miscellaneous tests Long-term stability 2012 IEC 0 test of polyethylene and polypropylene compounds - Edition 1.0 5202 60811-409 Electric and optical fibre cables Test methods for non-metallic materials Part 409: Miscellaneous tests Loss of mass test 2012 IEC 0 for thermoplastic insulations and sheaths - Edition 1.0 5203 60794-2-11 Optical fibre cables Part 2-11: Indoor optical fibre cables Detailed specification for simplex and duplex cables for use in 2012 IEC 0 premises cabling - Edition 2.0 5204 60794-1-22 Optical fibre cables Part 1-22: Generic specification Basic optical cable test procedures Environmental test methods - 2012 IEC 0 Edition 1.0 5205 60794-1-23 Optical fibre cables Part 1-23: Generic specification Basic optical cable test procedures Cable element test methods - 2012 IEC 0 Edition 1.0 5206 60794-1-1 NULL 2012 IEC 0 CORR 1 5207 60794-2-21 Optical fibre cables Part 2-21: Indoor optical fibre cables Detailed specification for multi-fibre optical distribution cables 2012 IEC 0 for use in premises cabling - Edition 2.0 5208 60794-3-12 Optical fibre cables Part 3-12: Outdoor cables Detailed specification for duct and directly buried optical 2012 IEC 0 telecommunication cables for use in premises cabling - Edition 2.0 5209 60794-2-31 Optical fibre cables Part 2-31: Indoor cables Detailed specification for optical fibre ribbon cables for use in premises 2012 IEC 0 cabling - Edition 2.0 5210 60809 AMD 5 NULL 2012 IEC 0 5211 60811-100 Electric and optical fibre cables Test methods for non-metallic materials Part 100: General - Edition 1.0 2012 IEC 0 5212 60794-4-20 Optical fibre cables Part 4-20: Aerial optical cables along electrical power lines Family specification for ADSS (All 2012 IEC 0 Dielectric Self Supported) optical cables - Edition 1.0 5213 60245-8 Rubber insulated cables Rated voltages up to and including 450/750 V Part 8: Cords for applications requiring high 2012 IEC 0 flexibility - Edition 1.2; Consolidated Reprint 5214 60227-7 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 7: Flexible cables screened and 2012 IEC 0 unscreened with two or more conductors - Edition 1.2; Consolidated Reprint 5215 60301 Preferred diameters of wire terminations of capacitors and resistors - Edition 3.0 2012 IEC 0 5216 60309-1 Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements - Edition 4.2 Consolidated Reprint 2012 IEC 0 5217 60297-3-107 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2012 IEC 0 3-107: Dimensions of subracks and plug-in units, small form factor - Edition 1.0 5218 60294 Measurement of the dimensions of a cylindrical component with axial terminations - Edition 2.0 2012 IEC 0 5219 60296 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear - Edition 4.0 2012 IEC 0 5220 60287-3-2 Electric cables Calculation of the current rating Part 3-2: Sections on operating conditions Economic optimization of 2012 IEC 0 power cable size - Edition 2.0 5221 60309-2 Plugs, socket-outlets and couplers for industrial purposes Part 2: Dimensional interchangeability requirements for pin and 2012 IEC 0 contact-tube accessories - Edition 4.2 Consolidated Reprint 5222 60309-4 Plugs, socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without 2012 IEC 0 interlock - Edition 1.1 Consolidated Reprint 5223 60317-0-7 Specifications for particular types of winding wires Part 0-7: General requirements Fully insulated (FIW) zero-defect 2012 IEC 0 enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm - Edition 1.0 5224 60317-0-8 Specifications for particular types of winding wires Part 0-8: General requirements Polyester glass fibre wound, resin or 2012 IEC 0 varnish impregnated or not impregnated, bare or enamelled rectangular copper wire - Edition 1.0 5225 60268-7 CORR Sound system equipment Part 7: Headphones and earphones - Edition 3.0 2012 IEC 0 1 5226 60191-6-22 Mechanical standardization of semiconductor devices Part 6-22: General rules for the preparation of outline drawings of 2012 IEC 0 surface mounted semiconductor device packages Design guide for semiconductor packages Silicon Fine-pitch Ball Grid Array and Silicon 5227 60191-2 AMD AMENDMENT 19 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2012 IEC 0 19 5228 60096-0-1 Radio frequency cables Part 0-1: Guidelines to the design of detail specifications Coaxial cables - Edition 3.1; 2012 IEC 0 Consolidated Reprint 5229 60143-2 Series capacitors for power systems Part 2: Protective equipment for series capacitor banks - Edition 2.0 2012 IEC 0 5230 60118-15 Electroacoustics Hearing aids Part 15: Methods for characterising signal processing in hearing aids with a speech-like 2012 IEC 0 signal - Edition 1.0 5231 60127-4 Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types - Edition 3.2 2012 IEC 0 Consolidated Reprint 5232 60068-2-78 Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state - Edition 2.0 2012 IEC 0 5233 60068-2-78 NULL 2012 IEC 0 (REDLINE) 5234 60079-0 CORR NULL 2012 IEC 0 1 5235 60076-18 Power transformers Part 18: Measurement of frequency response - Edition 1.0 2012 IEC 0 5236 60068-2-21 Environmental testing Part 2-21:Tests Test U: Robustness of terminations and integral mounting devices - Edition 6.0 2012 IEC 0 CORR 1 5237 60079-11 Explosive atmospheres Part 11: Equipment protection by intrinsic safety â__Iâ__ - Edition 6.0 2012 IEC 0 CORR 1 5238 60079-20-1 Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification Test methods and data - Edition 2012 IEC 0 CORR 1 1.0 5239 60079-33 Explosive atmospheres Part 33: Equipment protection by special protection â__sâ__ - Edition 1.0 2012 IEC 0 5240 60034-18-34 Rotating electrical machines Part 18-34: Functional evaluation of insulation systems Test procedures for form-wound 2012 IEC 0 windings Evaluation of thermomechanical endurance of insulation systems - Edition 1.0 5241 60034-18-21 Rotating electrical machines Part 18-21: Functional evaluation of insulation systems Test procedures for wire-wound 2012 IEC 0 windings Thermal evaluation and classification - Edition 2.0 5242 60034-18-31 Rotating electrical machines Part 18-31: Functional evaluation of insulation systems Test procedures for form-wound 2012 IEC 0 windings Thermal evaluation and classification of insulation systems used in rotating machines - Edition 2.0 5243 60034-28 Rotating electrical machines Part 28: Test methods for determining quantities of equivalent circuit diagrams for three- 2012 IEC 0 phase low-voltage cage induction motors - Edition 2.0 5244 60061-3 AMD Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2012 IEC 0 46 - Edition 3.44 5245 60061-2 AMD Amendment 45 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2012 IEC 0 45 Lampholders - Edition 3.32 5246 60061-1 AMD Amendment 48 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2012 IEC 0 48 caps - Edition 3.35 5247 60335-2-102 Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning 2012 IEC 0 appliances having electrical connections - Edition 1.2 Consolidated Reprint 5248 60335-2-107 Household and similar electrical appliances Safety Part 2-107: Particular requirements for robotic battery powered 2012 IEC 0 electrical lawnmowers - Edition 1.0 5249 60335-2-11 Household and similar electrical appliances Safety Part 2-11: Particular requirements for tumble dryers - Edition 7.2; 2012 IEC 0 Consolidated Reprint 5250 60317-2 Specifications for particular types of winding wires Part 2: Solderable polyurethane enamelled round copper wire, class 2012 IEC 0 130, with a bonding layer - Edition 4.0 5251 60317-50 Specifications for particular types of winding wires Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare 2012 IEC 0 or enamelled round copper wire, temperature index 200 - Edition 2.0 5252 60317-56 Specifications for particular types of winding wires Part 56: Solderable fully insulated (FIW) zero-defect polyurethane 2012 IEC 0 enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm, class 180 - Edition 1.0 5253 60317-60 Specifications for particular types of winding wires Part 60: Polyester glass fibre wound minimum class 155 resin or 2012 IEC 0 varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155 - Edition 1.0 5254 60317-60(2 NULL 2012 IEC 0 5255 60317-61 Specifications for particular types of winding wires Part 61: Polyester glass fibre wound, minimum class 180, resin or 2012 IEC 0 varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 - Edition 1.0 5256 60317-62 Specifications for particular types of winding wires Part 62: Polyester glass fibre wound, minimum class 200 resin or 2012 IEC 0 varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 - Edition 1.0 5257 60317-48 Specifications for particular types of winding wires Part 48: Glass-fibre wound resin or varnish impregnated, bare or 2012 IEC 0 enamelled round copper wire, temperature index 155 - Edition 2.0 5258 60317-49 Specifications for particular types of winding wires Part 49: Glass-fibre wound high temperature resin or varnish 2012 IEC 0 impregnated, bare or enamelled round copper wire, temperature index 180 - Edition 2.0 5259 60335-2-35 Household and similar electrical appliances Safety Part 2-35: Particular requirements for instantaneous water heaters - 2012 IEC 0 Edition 5.1 5260 60335-2-39 Household and similar electrical appliances Safety Part 2-39: Particular requirements for commercial electric multi- 2012 IEC 0 purpose cooking pans - Edition 6.1; Consolidated Reprint 5261 60335-2-4 Household and similar electrical appliances Safety Part 2-4: Particular requirements for spin extractors - Edition 6.1 2012 IEC 0 Consolidated Reprint 5262 60335-2-31 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking 2012 IEC 0 fume extractors - Edition 5.1; Consolidated Reprint 5263 60335-2-34 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors - Edition 5.2 2012 IEC 0 Consolidated Reprint 5264 60335-2-51 Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps for 2012 IEC 0 heating and service water installations - Edition 3.2 Consolidated Reprint 5265 60335-2-44 Household and similar electrical appliances Safety Part 2-44: Particular requirements for ironers - Edition 3.2 2012 IEC 0 Consolidated Reprint 5266 60335-2-45 Household and similar electrical appliances Safety Part 2-45: Particular requirements for portable heating tools and similar 2012 IEC 0 appliances - Edition 3.2 Consolidated Reprint 5267 60335-2-41 Household and similar electrical appliances Safety Part 2-41: Particular requirements for pumps - Edition 4.0 2012 IEC 0 5268 60335-2-5 Household and similar electrical appliances Safety Part 2-5: Particular requirements for dishwashers - Edition 6.0 2012 IEC 0 5269 60335-2-24 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice- 2012 IEC 0 cream appliances and ice-makers - Edition 7.2 Consolidated Reprint 5270 60335-2-27 Household and similar electrical appliances Safety Part 2-27: Particular requirements for appliances for skin exposure to 2012 IEC 0 optical radiation - Edition 5.2 Consolidated Reprint 5271 60335-2-3 Household and similar electrical appliances Safety Part 2-3: Particular requirements for electric irons - Edition 6.1; 2012 IEC 0 Consolidated Reprint 5272 60335-2-14 Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines - Edition 6.0 2012 IEC 0 5273 60335-2-15 Household and similar electrical appliances Safety Part 2-15: Particular requirements for appliances for heating liquids - 2012 IEC 0 Edition 6.1; Consolidated Reprint 5274 60335-2-16 Household and similar electrical appliances Safety Part 2-16: Particular requirements for food waste disposers - Edition 2012 IEC 0 5.2 Consolidated Reprint 5275 60335-2-17 Household and similar electrical appliances Safety Part 2-17: Particular requirements for blankets, pads, clothing and 2012 IEC 0 similar flexible heating appliances - Edition 3.1 Consolidated Reprint 5276 60335-2-2 Household and similar electrical appliances Safety Part 2-2: Particular requirements for vacuum cleaners and water- 2012 IEC 0 suction cleaning appliances - Edition 6.2 Consolidated Reprint 5277 60335-2-21 Household and similar electrical appliances Safety Part 2-21: Particular requirements for storage water heaters - Edition 2012 IEC 0 6.0 5278 60335-2-23 Household and similar electrical appliances Safety Part 2-23: Particular requirements for appliances for skin or hair care - 2012 IEC 0 Edition 6.0 5279 60335-2-9 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar 2012 IEC 0 portable cooking appliances - Edition 6.2 Consolidated Reprint 5280 60335-2-89 Household and similar electrical appliances Safety Part 2-89: Particular requirements for commercial refrigerating 2012 IEC 0 appliances with an incorporated or remote refrigerant unit or compressor - Edition 2.1 Consolidated Reprint 5281 60335-2-86 Household and similar electrical appliances Safety Part 2-86: Particular requirements for electric fishing machines - 2012 IEC 0 Edition 2.2 Consolidated Reprint 5282 60335-2-87 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning 2012 IEC 0 equipment - Edition 3.0 5283 60335-2-81 Household and similar electrical appliances Safety Part 2-81: Particular requirements for foot warmers and heating mats - 2012 IEC 0 Edition 3.0 5284 60335-2-8 Household and similar electrical appliances Safety Part 2-8: Particular requirements for shavers, hair clippers and similar 2012 IEC 0 appliances - Edition 6.1 5285 60335-2-75 Household and similar electrical appliances Safety Part 2-75: Particular requirements for commercial dispensing 2012 IEC 0 appliances and vending machines - Edition 3.1 5286 60335-2-79 Household and similar electrical appliances Safety Part 2-79: Particular requirements for high pressure cleaners and steam 2012 IEC 0 cleaners - Edition 4.0 5287 60335-2-7 Household and similar electrical appliances Safety Part 2-7: Particular requirements for washing machines - Edition 7.2 2012 IEC 0 Consolidated Reprint 5288 60335-2-69 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, 2012 IEC 0 including power brush, for commercial use - Edition 4.0 5289 60335-2-7 NULL 2012 IEC 0 CORR 1 5290 60335-2-71 Household and similar electrical appliances Safety Part 2-71: Particular requirements for electrical heating appliances for 2012 IEC 0 breeding and rearing animals - Edition 2.2 Consolidated Reprint 5291 60335-2-72 Household and similar electrical appliances Safety Part 2-72: Particular requirements for floor treatment machines with or 2012 IEC 0 without traction drive, for commercial use - Edition 4.0 5292 60335-2-66 Household and similar electrical appliances Safety Part 2-66: Particular requirements for water-bed heaters - Edition 2.2 2012 IEC 0 Consolidated Reprint 5293 60335-2-67 Household and similar electrical appliances Safety Part 2-67: Particular requirements for floor treatment machines, for 2012 IEC 0 commercial use - Edition 4.1; Consolidated Reprint 5294 60335-2-68 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for 2012 IEC 0 commercial use - Edition 4.1; Consolidated Reprint 5295 60404-11 Magnetic materials Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and 2012 IEC 0 strip - Edition 1.2 Consolidated Reprint 5296 60404-15 Magnetic materials Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic 2012 IEC 0 materials - Edition 1.1 Consolidated Reprint 5297 60364-5-55 Electrical installations of buildings Part 5-55: Selection and erection of electrical equipment Other equipment - Edition 2.1 2012 IEC 0 Consolidated Reprint 5298 60364-7-709 Low-voltage electrical installations Part 7-709: Requirements for special installations or locations Marinas and similar 2012 IEC 0 locations - Edition 2.1 Consolidated Reprint 5299 60358-1 Coupling capacitors and capacitor dividers Part 1: General rules - Edition 1.0 2012 IEC 0 5300 60352-5 Solderless connections Part 5: Press-in connections General requirements, test methods and practical guidance - Edition 2012 IEC 0 4.0 5301 60344 CORR 1 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires Application guide - 2012 IEC 0 Edition 3.0 5302 60350-1 CORR NULL 2012 IEC 0 1 5303 60349-4 Electric traction Rotating electrical machines for rail and road vehicles Part 4: Permanent magnet synchronous electrical 2012 IEC 0 machines connected to an electronic converter - Edition 1.0 5304 60436 Electric dishwashers for household use Methods for measuring the performance - Edition 4.0 2012 IEC 0 5305 60432-1 Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting 2012 IEC 0 purposes - Edition 2.2 Consolidated Reprint 5306 60432-2 Incandescent lamps Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting 2012 IEC 0 purposes - Edition 2.2 Consolidated Reprint 5307 60432-3 Incandescent lamps Safety specifications Part 3: Tungsten halogen lamps (non-vehicle) - Edition 2.0 2012 IEC 0 5308 60440 Method of measurement of non-linearity in resistors - Edition 1.0 2012 IEC 0 5309 60512-16-21 Connectors for electronic equipment Tests and measurements Part 16-21: Mechanical tests on contacts and terminations 2012 IEC 0 Test 16u: Whisker test via the application of external mechanical stresses - Edition 1.0 5310 60512-1-100 Connectors for electronic equipment Tests and measurements Part 1-100: General Applicable publications - Edition 3.0 2012 IEC 0 5311 60519-1 CORR NULL 2012 IEC 0 1 5312 60512-99-001 Connectors for electronic equipment Tests and measurements Part 99-001: Test schedule for engaging and separating 2012 IEC 0 connectors under electrical load Test 99a: Connectors used in twisted pair communication cabling with remote power - Edition 1.0 5313 60601-2-6 Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of 2012 IEC 0 microwave therapy equipment - Edition 2.1; Consolidated Reprint 5314 60601-2-63 Medical electrical equipment Part 2-63: Particular requirements for the basic safety and essential performance of dental 2012 IEC 0 extra-oral X-ray equipment - Edition 1.0 5315 60601-2-65 Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental 2012 IEC 0 intra-oral X-ray equipment - Edition 1.1; Consolidated Reprint 5316 60601-2-66 Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing 2012 IEC 0 instruments and hearing instrument systems - Edition 2.0 5317 60626-3 Combined flexible materials for electrical insulation Part 3: Specifications for individual materials - Edition 3.1 2012 IEC 0 Consolidated Reprint 5318 60601-2-24 Medical electrical equipment Part 2-24: Particular requirements for the basic safety and essential performance of infusion 2012 IEC 0 pumps and controllers - Edition 2.0 5319 60601-2-22 Medical electrical equipment Part 2-22: Particular requirements for basic safety and essential performance of surgical, 2012 IEC 0 cosmetic, therapeutic and diagnostic laser equipment - Edition 3.1 Consolidated Reprint 5320 60601-2-20 NULL 2012 IEC 0 CORR 1 5321 60601-2-19 NULL 2012 IEC 0 CORR 1 5322 60601-1-8 Medical electrical equipment Part 1-8: General requirements for basic safety and essential performance Collateral 2012 IEC 0 standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems - Editi 5323 60601-2-10 Medical electrical equipment Part 2-10: Particular requirements for the basic safety and essential performance of nerve and 2012 IEC 0 muscle stimulators - Edition 2.1 5324 60601-2-16 Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of 2012 IEC 0 haemodialysis, haemodiafiltration and haemofiltration equipment - Edition 4.0 5325 60601-2-47 Medical electrical equipment Part 2-47: Particular requirements for the basic safety and essential performance of 2012 IEC 0 ambulatory electrocardiographic systems - Edition 2.0 5326 60601-2-44 Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray 2012 IEC 0 equipment for computed tomography - Edition 3.2 Consolidated Reprint 5327 60601-2-27 MEDICAL ELECTRICAL EQUIPMENT Part 2-27: Particular requirements for the basic safety and essential performance 2012 IEC 0 CORR 1 of electrocardiographic monitoring equipment - Edition 3.0 5328 60601-2-26 Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential performance of 2012 IEC 0 electroencephalographs - Edition 3.0 5329 60601-2-3 Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short- 2012 IEC 0 wave therapy equipment - Edition 3.1; Consolidated Reprint 5330 60598-2-13 Luminaires Part 2-13: Particular requirements Ground recessed luminaires - Edition 1.2; Consolidated Reprint 2012 IEC 0 5331 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and essential performance - Edition 3.1 2012 IEC 0 Consolidated Reprint; Incorporates Amendment 1: 2012, Corrigenda 1: 12/2012, Corrigenda to Amendment 1: 07/2014, Interpretation 1: 04/2008, 5332 60601-1 CORR NULL 2012 IEC 0 1 5333 60571 Railway applications Electronic equipment used on rolling stock - Edition 3.0 2012 IEC 0 5334 60544-2 Electrical insulating materials Determination of the effects of ionizing radiation on insulating materials Part 2: Procedures 2012 IEC 0 for irradiation and test - Edition 3.0 5335 TS 62622 Nanotechnologies Description, measurement and dimensional quality parameters of artificial gratings - Edition 1.0 2012 IEC 0 5336 TS 62654 Network-based energy consumption measurement Energy saving system Conceptual model - Edition 1.0 2012 IEC 0 5337 TS 62668-1 Process management for avionics Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled 2012 IEC 0 electronic components - Edition 3.0 5338 TS 62686-1 Process management for avionics Electronic components for aerospace, defence and high performance (ADHP) 2012 IEC 0 applications Part 1: General requirements for high reliability integrated circuits and discrete semiconductors - Edition 2.0 5339 TS 62727 Photovoltaic systems Specifications for solar trackers - Edition 1.0 2012 IEC 0 5340 TS 62743 Radiation protection instrumentation Electronic counting dosemeters for pulsed fields of ionizing radiation - Edition 1.0 2012 IEC 0 5341 TS 62768 Preparation and processing of source definitions for data element types Guidelines for product committees - Edition 1.0 2012 IEC 0 5342 TS 62771 Information model covering the contents of IEC 81346-1 and IEC 81346-2, IEC 61175, IEC 61666 and IEC 81714-3 - 2012 IEC 0 Edition 1.0 5343 TS 62758 Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle - 2012 IEC 0 Edition 1.0 5344 TS 62644 Professional video storage equipment Guideline of time code transmission - Edition 1.0 2012 IEC 0 5345 TS 62647-1 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 1: 2012 IEC 0 Preparation for a lead-free control plan - Edition 1.0 5346 TS 62647-2 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 2: Mitigation 2012 IEC 0 of deleterious effects of tin - Edition 1.0 5347 TS 62592 Encoding guidelines for portable multimedia CE products using MP4 file format with AVC video codec and AAC audio 2012 IEC 0 codec - Edition 2.0 5348 TS 62607-2-1 Nanomanufacturing Key control characteristics Part 2-1: Carbon nanotube materials Film resistance - Edition 1.0 2012 IEC 0 5349 TS 62600-100 Marine energy Wave, tidal and other water current converters Part 100: Electricity producing wave energy converters 2012 IEC 0 Power performance assessment - Edition 1.0 5350 TR 62635 Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of 2012 IEC 0 electrical and electronic equipment - Edition 1.0 5351 TR 62653 Guideline for safe operation of medical equipment used for haemodialysis treatments - Edition 1.0 2012 IEC 0 5352 TR 62627-04 Fibre optic interconnecting devices and passive components Part 04: Example of uncertainty calculation: Measurement of 2012 IEC 0 the attenuation of an optical connector - Edition 1.0 5353 TR 62730 HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test - Edition 1.0 2012 IEC 0 5354 TR 62732 Three-digit code for designation of colour rendering and correlated colour temperature - Edition 1.0 2012 IEC 0 5355 TR 62721 Reliability of devices used in fibre optic systems General and guidance - Edition 1.0 2012 IEC 0 5356 TR 62750 Unified fluorescent lamp dimming standard calculations - Edition 1.0 2012 IEC 0 5357 TR 62778 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires - Edition 2.0 2012 IEC 0 5358 TR 62780 Multimedia systems and equipment Multimedia e-publishing and e-book Guideline for protection against mechanical 2012 IEC 0 stress during distribution of e-books in CD and DVD media - Edition 1.0 5359 TR 62781 Ultrasonics Conditioning of water for ultrasonic measurements - Edition 1.0 2012 IEC 0 5360 TR 62794 Industrial-process measurement, control and automation Reference model for representation of production facilities 2012 IEC 0 (digital factory) - Edition 1.0 5361 TR 80001-2-1 Application of risk management for IT-networks incorporating medical devices Part 2-1: Step-by-step risk management of 2012 IEC 0 medical IT-networks Practical applications and examples - Edition 1.0 5362 TR 80001-2-2 Application of risk management for IT-networks incorporating medical devices Part 2-2: Guidance for the disclosure and 2012 IEC 0 communication of medical device security needs, risks and controls - Edition 1.0 5363 TR 80001-2-3 Application of risk management for IT-networks incorporating medical devices Part 2-3: Guidance for wireless networks - 2012 IEC 0 Edition 1.0 5364 TR 80001-2-4 Application of risk management for IT-networks incorporating medical devices Part 2-4: Application guidance General 2012 IEC 0 implementation guidance for healthcare delivery organizations - Edition 1.0 5365 TS 60034-27-2 Rotating electrical machines Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating 2012 IEC 0 electrical machines - Edition 1.0 5366 TS 61973 High voltage direct current (HVDC) substation audible noise - Edition 1.0 2012 IEC 0 5367 TS 62239-1 Process management for avionics Management plan Part 1: Preparation and maintenance of an electronic components 2012 IEC 0 management plan - Edition 2.0 5368 TR 62130 Climatic field data including validation - Edition 1.0 2012 IEC 0 5369 TR 62221 Optical fibres Measurement methods Microbending sensitivity - Edition 2.0 2012 IEC 0 5370 TR 62222 Fire performance of communication cables installed in buildings - Edition 2.0 2012 IEC 0 5371 TR 62271-306 High-voltage switchgear and controlgear Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related 2012 IEC 0 to alternating current circuit-breakers - Edition 1.0 5372 TR 62258-4 Semiconductor die products Part 4: Questionnaire for die users and suppliers - Edition 2.0 2012 IEC 0 5373 TR 62351-10 Power systems management and associated information exchange Data and communications security Part 10: Security 2012 IEC 0 architecture guidelines - Edition 1.0 5374 TR 62357-1 Power systems management and associated information exchange Part 1: Reference architecture - Edition 2.0 2012 IEC 0 5375 TR 62348 Assessment of the impact of the most significant changes in Amendment 1 to IEC 60601-1:2005 and mapping of the 2012 IEC 0 clauses of IEC 60601-1:2005 to the previous edition - Edition 2.0 5376 TR 61850-7- Communication networks and systems for power utility automation Part 7-510: Basic communication structure 2012 IEC 0 510 Hydroelectric power plants Modelling concepts and guidelines - Edition 1.0 5377 TR 61850-90-5 Communication networks and systems for power utility automation Part 90-5: Use of IEC 61850 to transmit synchrophasor 2012 IEC 0 information according to IEEE C37.118 - Edition 1.0 5378 TR 61869-103 Instrument transformers The use of instrument transformers for power quality measurement - Edition 1.0 2012 IEC 0 5379 TR 61282-11 NULL 2012 IEC 0 5380 TR 61804-6 Function blocks (FB) for process control Electronic device description language (EDDL) Part 6: Meeting the requirements 2012 IEC 0 for integrating fieldbus devices in engineering tools for field devices - Edition 1.0 5381 TR 61340-1 Electrostatics Part 1: Electrostatic phenomena Principles and measurements - Edition 1.0 2012 IEC 0 5382 TR 60725 Consideration of reference impedances and public supply network impedances for use in determining the disturbance 2012 IEC 0 characteristics of electrical equipment having a rated current â_¤75 A per phase - Edition 3.0 5383 TR 61000-1-6 Electromagnetic compatibility (EMC) Part 1-6: General Guide to the assessment of measurement uncertainty - Edition 1.0 2012 IEC 0 5384 PAS 62734 NULL 2012 IEC 0 5385 PAS 62814 NULL 2012 IEC 0 5386 IECQ 03-5 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Prodecure Part 5: IECQ HSPM 2012 IEC 0 Scheme Hazardous Substance Process Management Requirements - Edition 4.0 5387 IECQ 03-6 NULL 2012 IEC 0 5388 PAS 60704-2- Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-15: 2012 IEC 0 15 CORR 1 Particular requirements for household food waste disposers - Edition 1.0 5389 IECQ 01 NULL 2012 IEC 0 5390 IECQ 03-1 IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure Part 1: General 2012 IEC 0 Requirements for all IECQ Schemes - Edition 2.0 5391 IECQ 03-4 IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Prodecure Part 4: IECQ AVIONICS 2012 IEC 0 Scheme Avionics Parts and Assembly Management - Edition 3.0 5392 62271-107 High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 2012 IEC 0 kV up to and including 52 kV - Edition 2.0 5393 62271-37-082 NULL 2012 IEC 0 5394 62276 Single crystal wafers for surface acoustic wave (SAW) device applications Specifications and measuring methods - Edition 2012 IEC 0 3.0 5395 62271-110 High-voltage switchgear and controlgear Part 110: Inductive load switching - Edition 3.0 2012 IEC 0 5396 62271-110 CORRIGENDUM 1 High-voltage switchgear and controlgear Part 110: Inductive load switching - Edition 3.0 2012 IEC 0 CORR 1 5397 62271-111 High-voltage switchgear and controlgear Part 111: Automatic circuit reclosers and fault interrupters for alternating current 2012 IEC 0 systems up to 38 kV - Edition 2.0 5398 62271-207 High-voltage switchgear and controlgear Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated 2012 IEC 0 voltages above 52 kV - Edition 2.0 5399 62282-2 Fuel cell technologies - Part 2: Fuel cell modules - Edition 2.0 2012 IEC 0 5400 62282-3-100 Fuel cell technologies Part 3-100: Stationary fuel cell power systems Safety - Edition 1.0 2012 IEC 0 5401 62282-3-300 Fuel cell technologies Part 3-300: Stationary fuel cell power systems Installation - Edition 1.0 2012 IEC 0 5402 62281 Safety of primary and secondary lithium cells and batteries during transport - Edition 3.0 2012 IEC 0 5403 62282-5-1 Fuel cell technologies Part 5-1: Portable fuel cell power systems Safety - Edition 2.0 2012 IEC 0 5404 62282-6-100 Fuel cell technologies Part 6-100: Micro fuel cell power systems Safety - Edition 1.1; Consolidated Reprint 2012 IEC 0 5405 62282-6-200 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods - Edition 3.0 2012 IEC 0 5406 62227 Multimedia home server systems Digital rights permission code - Edition 1.1; Consolidated Reprint 2012 IEC 0 5407 62243 Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE) - Edition 2.0 2012 IEC 0 5408 62271-100 High-voltage switchgear and controlgear Part 100: Alternating-current circuit-breakers - Edition 2.1; Consolidated Reprint 2012 IEC 0 5409 62271-100 Amendment 1 High-voltage switchgear and controlgear Part 100: Alternating-current circuit-breakers - Edition 2.1 2012 IEC 0 AMD 1 CORR 1 5410 62271-101 High-voltage switchgear and controlgear Part 101: Synthetic testing - Edition 2.0 2012 IEC 0 5411 62271-105 High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations for rated voltages above 1 2012 IEC 0 kV up to and including 52 kV - Edition 2.0 5412 62132-8 Integrated circuits Measurement of electromagnetic immunity Part 8: Measurement of radiated immunity IC stripline 2012 IEC 0 method - Edition 1.0 5413 62133 NULL 2012 IEC 0 5414 62217 Polymeric HV insulators for indoor and outdoor use General definitions, test methods and acceptance criteria - Edition 2.0 2012 IEC 0 5415 62150-3 Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by 2012 IEC 0 mechanical disturbance in optical receptacles and transceiver interfaces - Edition 2.0 5416 62149-7 Fibre optic active components and devices Performance standards Part 7: 1 310-nm discrete vertical cavity surface 2012 IEC 0 emitting laser devices - Edition 1.0 5417 62153-4-14 Metallic communication cable test methods Part 4-14: Electromagnetic compatibility (EMC) Coupling attenuation of 2012 IEC 0 cable assemblies (field conditions) absorbing clamp method - Edition 1.0 5418 62341-6-3 Organic light emitting diode (OLED) displays Part 6-3: Measuring methods of image quality - Edition 1.0 2012 IEC 0 5419 62343-1-3 Dynamic modules Part 1-3: Performance standards Dynamic gain tilt equalizer (nonconnectorized) - Edition 2.0 2012 IEC 0 5420 62341-6-2 Organic light emitting diode (OLED) displays Part 6-2: Measuring methods of visual quality and ambient performance - 2012 IEC 0 Edition 2.0 5421 62337 Commissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones - 2012 IEC 0 Edition 2.0 5422 62337 CORR 1 Commissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones - 2012 IEC 0 Edition 2.0 5423 62358 Ferrite cores Standard inductance factor for gapped cores and its tolerance - Edition 2.0 2012 IEC 0 5424 62282-6-300 Fuel cell technologies Part 6-300: Micro fuel cell power systems Fuel cartridge interchangeability - Edition 2.0 2012 IEC 0 5425 62396-2 Process management for avionics Atmospheric radiation effects Part 2: Guidelines for single event effects testing for 2012 IEC 0 avionics systems - Edition 1.0 5426 62396-1 Process management for avionics Atmospheric radiation effects Part 1: Accommodation of atmospheric radiation effects 2012 IEC 0 via single event effects within avionics electronic equipment - Edition 2.0 5427 62387 Radiation protection instrumentation Passive integrating dosimetry systems for personal and environmental monitoring of 2012 IEC 0 photon and beta radiation - Edition 1.0 5428 62381 Automation systems in the process industry Factory acceptance test (FAT), site acceptance test (SAT), and site integration 2012 IEC 0 test (SIT) - Edition 2.0 5429 62382 Control systems in the process industry Electrical and instrumentation loop check - Edition 2.0 2012 IEC 0 5430 62439-4 AMD AMENDMENT 1 Industrial communication networks High availability automation networks Part 4: Cross-network 2012 IEC 0 1 Redundancy Protocol (CRP) - Edition 1.0 5431 62439-3 Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) 2012 IEC 0 and High-availability Seamless Redundancy (HSR) - Edition 3.0 5432 62439-1 AMD NULL 2012 IEC 0 1 5433 62477-1 Safety requirements for power electronic converter systems and equipment Part 1: General - Edition 1.0 2012 IEC 0 5434 62474 Material declaration for products of and for the electrotechnical industry - Edition 1.0 2012 IEC 0 5435 62639 Fluorescent induction lamps Performance specification - Edition 1.0 2012 IEC 0 5436 62628 Guidance on software aspects of dependability - Edition 1.0 2012 IEC 0 5437 62623 Desktop and notebook computers Measurement of energy consumption - Edition 1.0 2012 IEC 0 5438 62616 CORR 1 Maritime navigation and radiocommunication equipment and systems Bridge navigational watch alarm system (BNWAS) 2012 IEC 0 - Edition 1.0 5439 62582-3 Nuclear power plants Instrumentation and control important to safety Electrical equipment condition monitoring methods 2012 IEC 0 Part 3: Elongation at break - Edition 1.0 5440 62585 Electroacoustics Methods to determine corrections to obtain the free-field response of a sound level meter - Edition 1.0 2012 IEC 0 5441 62595-2 NULL 2012 IEC 0 5442 62697-1 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Part 1: 2012 IEC 0 Test method for quantitative determination of dibenzyldisulfide (DBDS) - Edition 1.0 5443 62646 Nuclear power plants Control rooms Computer based procedures - Edition 2.0 2012 IEC 0 5444 62648 Graphical symbols for use on equipment Guidelines for the inclusion of graphical symbols in IEC publications - Edition 2012 IEC 0 1.1; Consolidated Reprint 5445 62665 Multimedia systems and equipment Multimedia e-publishing and e-book technologies Texture map for auditory 2012 IEC 0 presentation of printed texts - Edition 2.0 5446 62674-1 High frequency inductive components Part 1: Fixed surface mount inductors for use in electronic and telecommunication 2012 IEC 0 equipment - Edition 1.0 5447 62575-2 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Part 2: Guidelines for the use - Edition 1.0 2012 IEC 0 5448 62553 Methods of measurement for digital network Performance characteristics of terrestrial digital multimedia transmission 2012 IEC 0 network - Edition 1.0 5449 62561-1 Lightning protection system components (LPSC) Part 1: Requirements for connection components - Edition 2.0 2012 IEC 0 5450 62561-2 Lightning protection system components (LPSC) Part 2: Requirements for conductors and earth electrodes - Edition 1.0 2012 IEC 0 5451 62561-3 Lightning protection system components (LPSC) Part 3: Requirements for isolating spark gaps (ISG) - Edition 1.0 2012 IEC 0 5452 62566 Nuclear power plants Instrumentation and control important to safety Development of HDL-programmed integrated 2012 IEC 0 circuits for systems performing category A functions - Edition 1.0 5453 62551 Analysis techniques for dependability Petri net techniques - Edition 1.0 2012 IEC 0 5454 62560 CORR 1 NULL 2012 IEC 0 5455 62541-7 OPC unified architecture - Part 7: Profiles - Edition 2.0 2012 IEC 0 5456 62541-9 OPC unified architecture Part 9: Alarms and conditions - Edition 2.0 2012 IEC 0 5457 62531 Property Specification Language (PSL) - Edition 2.0 2012 IEC 0 5458 62541-10 OPC Unified Architecture - Part 10: Programs - Edition 2.0 2012 IEC 0 5459 62512 Electric clothes washer-dryers for household use Methods for measuring the performance - Edition 1.0 2012 IEC 0 5460 62529 Standard for Signal and Test Definition - Edition 2.0 2012 IEC 0 5461 62488-1 Power line communication systems for power utility applications Part 1: Planning of analogue and digital power line 2012 IEC 0 carrier systems operating over EHV/HV/MV electricity grids - Edition 1.0 5462 62706 Radiation protection instrumentation Environmental, electromagnetic and mechanical performance requirements - Edition 2012 IEC 0 1.0 5463 62729 Maritime navigation and radiocommunication equipment and systems Shipborne equipment for long-range identification 2012 IEC 0 and tracking (LRIT) Performance requirements - Edition 1.0 5464 62755 Radiation protection instrumentation Data format for radiation instruments used in the detection of illicit trafficking of 2012 IEC 0 radioactive materials - Edition 1.0 5465 GUIDE 109 Environmental aspects Inclusion in electrotechnical product standards - Edition 3.0 2012 IEC 0 5466 IECEX 01 NULL 2012 IEC 0 5467 IECEE 01 NULL 2012 IEC 0 5468 IECEE 02-2 NULL 2012 IEC 0 5469 CISPR 22 INT INFORMATION TECHNOLOGY EQUIPMENT RADIO DISTURBANCE CHARACTERISTICS LIMITS AND 2012 IEC 0 3 METHODS OF MEASUREMENT - Edition 6.0 5470 CISPR 32 Electromagnetic compatibility of multimedia equipment Emission requirements - Edition 2.0 2012 IEC 0 5471 CISPR-TR 16-3 NULL 2012 IEC 0 5472 CISPR TR 30-1 Test method on electromagnetic emissions Part 1: Electronic control gear for single- and double-capped fluorescent lamps 2012 IEC 0 - Edition 1.0 5473 CISPR TR 30-2 Test method on electromagnetic emissions Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps 2012 IEC 0 - Edition 1.0 5474 CISPR.TR 16-3 NULL 2012 IEC 0 5475 CISPR 32 Electromagnetic compatibility of multimedia equipment Emission requirements - Edition 2.0 2012 IEC 0 CORR 1 5476 CISPR 32 NULL 2012 IEC 0 CORR 2 5477 CISPR 16-1-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and 2012 IEC 0 immunity measuring apparatus Antennas and test sites for radiated disturbance measurements - Edition 3.2; Consolidated Reprint 5478 CISPR 16-1-5 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and 2012 IEC 0 immunity measuring apparatus Antenna calibration sites and reference test sites for 5 MHz to 18 GHz - Edition 2.1; Consolidated Reprint 5479 80005-1 Utility connections in port Part 1: High Voltage Shore Connection (HVSC) Systems General requirements - Edition 1.0 2012 IEC 0 5480 80601-2-35 NULL 2012 IEC 0 CORR 1 5481 82079-1 Preparation of instructions for use Structuring, content and presentation Part 1: General principles and detailed 2012 IEC 0 requirements - Edition 1.0 5482 80601-2-60 Medical electrical equipment Part 2-60: Particular requirements for the basic safety and essential performance of dental 2012 IEC 0 equipment - Edition 1.0 5483 61869-2 Instrument transformers Part 2: Additional requirements for current transformers - Edition 1.0 2012 IEC 0 5484 61881-2 Railway applications Rolling stock equipment Capacitors for power electronics Part 2: Aluminium electrolytic capacitors 2012 IEC 0 with non-solid electrolyte - Edition 1.0 5485 61881-3 Railway applications Rolling stock equipment Capacitors for power electronics Part 3: Electric double-layer capacitors - 2012 IEC 0 Edition 1.1 Consolidated Reprint 5486 61892-2 Mobile and fixed offshore units Electrical installations Part 2: System design - Edition 2.0 2012 IEC 0 5487 61915-2 CORR Low-voltage switchgear and controlgear Device profiles for networked industrial devices Part 2: Root device profiles for 2012 IEC 0 1 starters and similar equipment - Edition 1.0 5488 61892-3 Mobile and fixed offshore units Electrical installations Part 3: Equipment - Edition 3.0 2012 IEC 0 5489 61924-2 Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Part 2: Modular 2012 IEC 0 structure for INS Operational and performance requirements, methods of testing and required test results - Edition 1.0 5490 61850-7-410 Communication networks and systems for power utility automation Part 7-410: Basic communication structure 2012 IEC 0 Hydroelectric power plants Communication for monitoring and control - Edition 2.1; Consolidated Reprint 5491 61850-10 Communication networks and systems for power utility automation Part 10: Conformance testing - Edition 2.0 2012 IEC 0 5492 61837-1 Surface mounted piezoelectric devices for frequency control and selection Standard outlines and terminal lead connections 2012 IEC 0 Part 1: Plastic moulded enclosure outlines - Edition 2.0 5493 61800-3 Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods - Edition 3.0 2012 IEC 0 5494 61788-13 Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in superconducting 2012 IEC 0 multifilamentary composites - Edition 2.0 5495 61988-2-1 Plasma display panels Part 2-1: Measuring methods Optical and optoelectrical - Edition 2.0 2012 IEC 0 5496 61988-4-2 Plasma display panels Part 4-2: Environmental testing methods Panel strength - Edition 1.0 2012 IEC 0 5497 61993-2 Maritime navigation and radiocommunication equipment and systems Automatic identification systems (AIS) Part 2: Class 2012 IEC 0 A shipborne equipment of the automatic identification system (AIS) Operational and performance requirements, methods of test and requir 5498 62023 CORR 1 Structuring of technical information and documentation - Edition 2.0 2012 IEC 0 5499 61968-1 Application integration at electric utilities System interfaces for distribution management Part 1: Interface architecture and 2012 IEC 0 general recommendations - Edition 2.0 5500 61988-2-5 Plasma display panels Part 2-5: Measuring methods Acoustic noise - Edition 1.0 2012 IEC 0 5501 61987-10 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 10: Lists 2012 IEC 0 CORR 1 of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange Fundamentals - Edition 1.0 5502 61987-11 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: Lists 2012 IEC 0 of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures - Edition 2.0 5503 61982 Secondary batteries (except lithium) for the propulsion of electric road vehicles Performance and endurance tests - Edition 2012 IEC 0 1.0 5504 62061 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems 2012 IEC 0 - Edition 1.2; Consolidated Reprint 5505 62075 Audio/video, information and communication technology equipment Environmentally conscious design - Edition 2.0 2012 IEC 0 5506 62047-5 CORR Semiconductor devices Micro-electromechanical devices Part 5: RF MEMS switches - Edition 1.0 2012 IEC 0 1 5507 62047-9 CORR Semiconductor devices Micro-electromechanical devices Part 9: Wafer to wafer bonding strength measurement for 2012 IEC 0 1 MEMS - Edition 1.0 5508 62032 Guide for the Application, Specification, and Testing of Phase-Shifting Transformers - Edition 2.0 2012 IEC 0 5509 62034 Automatic test systems for battery powered emergency escape lighting - Edition 2.0 2012 IEC 0 5510 62035 Discharge lamps (excluding fluorescent lamps) Safety specifications - Edition 2.1; Consolidated Reprint 2012 IEC 0 5511 62031 LED modules for general lighting Safety specifications - Edition 1.2; Consolidated Reprint 2012 IEC 0 5512 62037-1 Passive RF and microwave devices, intermodulation level measurement Part 1: General requirements and measuring 2012 IEC 0 methods - Edition 1.0 5513 62037-2 Passive RF and microwave devices, intermodulation level measurement Part 2: Measurement of passive intermodulation in 2012 IEC 0 coaxial cable assemblies - Edition 1.0 5514 62037-3 Passive RF and microwave devices, intermodulation level measurement Part 3: Measurement of passive intermodulation in 2012 IEC 0 coaxial connectors - Edition 1.0 5515 62037-4 Passive RF and microwave devices, intermodulation level measurement Part 4: Measurement of passive intermodulation in 2012 IEC 0 coaxial cables - Edition 1.0 5516 62047-10 Semiconductor devices Micro-electromechanical devices Part 10: Micro-pillar compression test for MEMS materials - 2012 IEC 0 CORR 1 Edition 1.0 5517 62047-13 Semiconductor devices Micro-electromechanical devices Part 13: Bend - and shear - type test methods of measuring 2012 IEC 0 adhesive strength for MEMS structures - Edition 1.0 5518 62047-14 Semiconductor devices Micro-electromechanical devices Part 14: Forming limit measuring method of metallic film 2012 IEC 0 materials - Edition 1.0 5519 61753-061-2 Fibre optic interconnecting devices and passive components Performance standard Part 061-2: Non-connectorized single- 2012 IEC 0 mode fibre optic pigtailed isolators for category C Controlled environments - Edition 1.0 5520 61753-087-6 Fibre optic interconnecting devices and passive components Performance standard Part 087-6: Non-connectorised single- 2012 IEC 0 mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O Uncontrolled environment - Edition 1.0 5521 61753-143-2 Fibre optic interconnecting devices and passive components Performance standard Part 143-2: Optical passive VIPA- 2012 IEC 0 based dispersion compensator of single-mode fibre transmission for category C Controlled environment - Edition 1.0 5522 61753-091-2 Fibre optic interconnecting devices and passive components Performance standard Part 091-2: Non-connectorized single- 2012 IEC 0 mode fibre optic pigtailed circulators for category C Controlled environments - Edition 1.0 5523 61754-20 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 20: Type LC connector 2012 IEC 0 family - Edition 2.0 5524 61754-20-100 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 20-100: Interface 2012 IEC 0 standard for LC connectors with protective housings related to IEC 61076-3-106 - Edition 1.0 5525 61754-26 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 26: Type SF connector 2012 IEC 0 family - Edition 1.0 5526 61754-28 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 28: Type LF3 connector 2012 IEC 0 family - Edition 1.0 5527 61754-29 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 29: Type BLINK 2012 IEC 0 connector series - Edition 1.0 5528 61757-1 Fibre optic sensors Part 1: Generic specification - Edition 2.0 2012 IEC 0 5529 61755-3-6 Fibre optic connector optical interfaces Part 3-6: Optical interface 2,5 mm and 1,25 mm diameter cylindrical 8 degrees 2012 IEC 0 angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre - Edition 1.1 Consolidated Reprint 5530 61747-6-2 Liquid crystal display devices Part 6-2: Measuring methods for liquid crystal display modules Reflective type - Edition 2012 IEC 0 CORR 1 1.0 5531 61747-30-1 Liquid crystal display devices Part 30-1: Measuring methods for liquid crystal display modules Transmissive type - 2012 IEC 0 Edition 1.0 5532 61747-4 Liquid crystal display devices Part 4: Liquid crystal display modules and cells Essential ratings and characteristics - 2012 IEC 0 Edition 2.0 5533 61753-056-2 Fibre optic interconnecting devices and passive components Performance standard Part 056-2: Single mode fibre pigtailed 2012 IEC 0 style optical fuse for category C Controlled environment - Edition 1.0 5534 61753-057-2 Fibre optic interconnecting devices and passive components Performance standard Part 057-2: Single mode fibre plug- 2012 IEC 0 receptacle style optical fuse for category C Controlled environment - Edition 1.0 5535 61753-022-2 Fibre optic interconnecting devices and passive components Performance standard Part 022-2: Fibre optic connectors 2012 IEC 0 terminated on multimode fibre for category C Controlled environment - Edition 2.0 5536 61753-021-3 Fibre optic interconnecting devices and passive components Performance standard Part 021-3: Single-mode fibre optic 2012 IEC 0 connectors for category U Uncontrolled environment - Edition 1.0 5537 61730-2 Photovoltaic (PV) module safety qualification Part 2: Requirements for testing - Edition 2.0 2012 IEC 0 5538 61587-4 Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 series Part 4: Combination of 2012 IEC 0 performance levels for modular cabinets - Edition 1.0 5539 61643-21 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling 2012 IEC 0 networks Performance requirements and testing methods - Edition 1.2 Consolidated Reprint 5540 61674 Medical electrical equipment Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray 2012 IEC 0 diagnostic imaging - Edition 2.0 5541 61671 Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML - 2012 IEC 0 Edition 1.0 5542 61558-2-14 Safety of transformers, reactors, power supply units and combination thereof Part 2-14: Particular requirements and tests 2012 IEC 0 for variable transformers and power supply units incorporating variable transformers - Edition 1.0 5543 61549 AMD 3 AMENDMENT 3 Miscellaneous Lamps - Edition 2.1 2012 IEC 0 5544 61523-1 Delay and power calculation standards Part 1: Integrated circuit delay and power calculation systems - Edition 2.0 2012 IEC 0 5545 61535 Installation couplers intended for permanent connection in fixed installations - Edition 1.1 Consolidated Reprint 2012 IEC 0 5546 61496-1 Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests - Edition 3.0 2012 IEC 0 5547 61499-1 Function blocks Part 1: Architecture - Edition 2.0 2012 IEC 0 5548 61499-2 Function blocks Part 2: Software tool requirements - Edition 2.0 2012 IEC 0 5549 61360-2 Standard data element types with associated classification scheme for electric components Part 2: EXPRESS dictionary 2012 IEC 0 schema - Edition 3.0 5550 61347-2-8 Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps - Edition 1.1 2012 IEC 0 AMD 1 CORR 1 5551 61347-2-9 Lamp controlgear Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding 2012 IEC 0 fluorescent lamps) - Edition 2.0 5552 61378-1 CORR Converter transformers Part 1: Transformers for industrial applications - Edition 2.0 2012 IEC 0 1 5553 61375-3-1 Electronic railway equipment Train communication network (TCN) Part 3-1: Multifunction Vehicle Bus (MVB) - Edition 2012 IEC 0 1.0 5554 61375-3-2 Electronic railway equipment Train communication network (TCN) Part 3-2: MVB (Multifunction Vehicle Bus) 2012 IEC 0 conformance testing - Edition 1.0 5555 61375-3-3 Electronic railway equipment Train communication network (TCN) Part 3-3: CANopen Consist Network (CCN) - Edition 2012 IEC 0 1.0 5556 61375-1 Electronic railway equipment Train communication network (TCN) Part 1: General architecture - Edition 3.0 2012 IEC 0 5557 61375-2-1 Electronic railway equipment Train communication network (TCN) Part 2-1: Wire Train Bus (WTB) - Edition 1.0 2012 IEC 0 5558 61375-2-2 Electronic railway equipment Train communication network (TCN) Part 2-2: Wire Train Bus conformance testing - 2012 IEC 0 Edition 1.0 5559 61362 Guide to specification of hydraulic turbine governing systems - Edition 2.0 2012 IEC 0 5560 61347-1 Lamp controlgear - Part 1: General and safety requirements - Edition 3.0 2012 IEC 0 5561 61340-4-4 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate 2012 IEC 0 bulk containers (FIBC) - Edition 2.1 Consolidated Reprint 5562 61340-4-10 Electrostatics Part 4-10: Standard test methods for specific applications Two-point resistance measurement - Edition 1.0 2012 IEC 0 5563 61439-3 Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary 2012 IEC 0 persons (DBO) - Edition 1.0 5564 61400-4 Wind turbines Part 4: Design requirements for wind turbine gearboxes - Edition 1.0 2012 IEC 0 5565 61439-6 Low-voltage switchgear and controlgear assemblies Part 6: Busbar trunking systems (busways) - Edition 1.0 2012 IEC 0 5566 61445 Digital Test Interchange Format (DTIF) - Edition 1.0 2012 IEC 0 5567 61439-4 Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites 2012 IEC 0 (ACS) - Edition 1.0 5568 61394 CORR 1 Overhead lines Requirements for greases for aluminium, aluminium alloy and steel bare conductors - Edition 1.0 2012 IEC 0 5569 61400-11 Wind turbines Part 11: Acoustic noise measurement techniques - Edition 3.0 2012 IEC 0 5570 61394 Overhead lines Requirements for greases for aluminium, aluminium alloy and steel bare conductors - Edition 1.0 2011 IEC 0 5571 61386-25 Conduit systems for cable management Part 25: Particular requirements Conduit fixing devices - Edition 1.0 2011 IEC 0 5572 61439-1 Low-voltage switchgear and controlgear assemblies Part 1: General rules - Edition 2.0 2011 IEC 0 5573 61439-2 Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies - Edition 2.0 2011 IEC 0 5574 61378-1 Converter transformers Part 1: Transformers for industrial applications - Edition 2.0 2011 IEC 0 5575 61347-2-7 Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self- 2011 IEC 0 contained) - Edition 3.0 5576 61347-2-2 Lamp controlgear Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament 2011 IEC 0 lamps - Edition 2.0 5577 61347-2-3 Lamp control gear Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent 2011 IEC 0 lamps - Edition 2.1; Consolidated Reprint 5578 61347-2-3 NULL 2011 IEC 0 CORR 1 5579 61534-1 Powertrack systems Part 1: General requirements - Edition 2.1 Consolidated Reprint 2011 IEC 0 5580 61513 Nuclear power plants Instrumentation and control important to safety General requirements for systems - Edition 2.0 2011 IEC 0 5581 61557-13 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2011 IEC 0 or monitoring of protective measures Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage 5582 61558-1 CORR CORRIGENDUM 3 Safety of power transformers, power supplies, reactors and similar products Part 1: General 2011 IEC 0 3 requirements and tests - Edition 2.1 5583 61558-2-12 Safety of transformers, reactors, power supply units and combination thereof Part 2-12: Particular requirements and tests 2011 IEC 0 for constant voltage transformers and power supply units for constant voltage - Edition 2.0 5584 61558-2-15 Safety of transformers, reactors, power supply units and combinations thereof Part 2-15: Particular requirements and tests 2011 IEC 0 for isolating transformers for the supply of medical locations - Edition 2.0 5585 61577-3 Radiation protection instrumentation Radon and radon decay product measuring instruments Part 3: Specific requirements 2011 IEC 0 for radon decay product measuring instruments - Edition 2.0 5586 61587-1 Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 series Part 1: Environmental 2011 IEC 0 requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation - Edition 5587 61587-2 Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 2: Seismic tests for cabinets and 2011 IEC 0 racks - Edition 2.0 5588 61643-11 Low-voltage surge protective devices Part 11: Surge protective devices connected to low-voltage power systems 2011 IEC 0 Requirements and test methods - Edition 1.0 5589 61701 Salt mist corrosion testing of photovoltaic (PV) modules - Edition 2.0 2011 IEC 0 5590 61691-1-1 Behavioural languages Part 1-1: VHDL Language Reference Manual - Edition 2.0 2011 IEC 0 5591 61709 Electric components Reliability Reference conditions for failure rates and stress models for conversion - Edition 3.0 2011 IEC 0 5592 61747-6-2 Liquid crystal display devices Part 6-2: Measuring methods for liquid crystal display modules Reflective type - Edition 2011 IEC 0 1.0 5593 61747-5-2 NULL 2011 IEC 0 5594 61784-3-18 Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 2011 IEC 0 18 - Edition 1.1; Consolidated Reprint 5595 61753-141-2 Fibre optic interconnecting devices and passive components Performance standard Part 141-2: Fibre optic passive 2011 IEC 0 chromatic dispersion compensator using single-mode dispersion compensating fibre for category C Controlled environments - Edition 1.0 5596 61747-6-3 Liquid crystal display devices Part 6-3: Measuring methods for liquid crystal display modules Motion artifact 2011 IEC 0 measurement of active matrix liquid crystal display modules - Edition 1.0 5597 62040-3 Uninterruptible power systems (UPS) Part 3: Method of specifying the performance and test requirements - Edition 2.0 2011 IEC 0 5598 62047-12 Semiconductor devices Micro-electromechanical devices Part 12: Bending fatigue testing method of thin film materials 2011 IEC 0 using resonant vibration of MEMS structures - Edition 1.0 5599 62047-10 Semiconductor devices Micro-electromechanical devices Part 10: Micro-pillar compression test for MEMS materials - 2011 IEC 0 Edition 1.0 5600 62027 Preparation of object lists, including parts lists - Edition 2.0 2011 IEC 0 5601 62047-7 Semiconductor devices Micro-electromechanical devices Part 7: MEMS BAW filter and duplexer for radio frequency 2011 IEC 0 control and selection - Edition 1.0 5602 62047-8 Semiconductor devices Micro-electromechanical devices Part 8: Strip bending test method for tensile property 2011 IEC 0 measurement of thin films - Edition 1.0 5603 62047-9 Semiconductor devices Micro-electromechanical devices Part 9: Wafer to wafer bonding strength measurement for 2011 IEC 0 MEMS - Edition 1.0 5604 62047-5 Semiconductor devices Micro-electromechanical devices Part 5: RF MEMS switches - Edition 1.0 2011 IEC 0 5605 62087 NULL 2011 IEC 0 (REDLINE) 5606 62059-32-1 Electricity metering equipment Dependability Part 32-1: Durability Testing of the stability of metrological characteristics 2011 IEC 0 by applying elevated temperature - Edition 1.0 5607 62067 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV 2011 IEC 0 (Um = 550 kV) Test methods and requirements - Edition 2.0 5608 62067 NULL 2011 IEC 0 (REDLINE) 5609 61988-2-4 Plasma display panels Part 2-4: Measuring methods Visual quality: Image artifacts - Edition 1.0 2011 IEC 0 5610 61967-8 Integrated circuits Measurement of electromagnetic emissions Part 8: Measurement of radiated emissions IC stripline 2011 IEC 0 method - Edition 1.0 5611 61969-1 Mechanical structures for electronic equipment Outdoor enclosures Part 1: Design guidelines - Edition 2.0 2011 IEC 0 5612 61969-2 Mechanical structures for electronic equipment Outdoor enclosures Part 2: Coordination dimensions - Edition 2.0 2011 IEC 0 5613 61969-3 Mechanical structures for electronic equipment Outdoor enclosures Part 3: Environmental requirements, tests and safety 2011 IEC 0 aspects - Edition 2.0 5614 62023 Structuring of technical information and documentation - Edition 2.0 2011 IEC 0 5615 61988-1 Plasma display panels Part 1: Terminology and letter symbols - Edition 2.0 2011 IEC 0 5616 61788-11 NULL 2011 IEC 0 5617 61788-15 Superconductivity Part 15: Electronic characteristic measurements Intrinsic surface impedance of superconductor films at 2011 IEC 0 microwave frequencies - Edition 1.0 5618 61788-4 Superconductivity Part 4: Residual resistance ratio measurement Residual resistance ratio of Nb-Ti and Nb3Sn composite 2011 IEC 0 superconductors - Edition 4.0 5619 61788-6 Superconductivity Part 6: Mechanical properties measurement Room temperature tensile test of Cu/Nb-Ti composite 2011 IEC 0 superconductors - Edition 3.0 5620 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters - 2011 IEC 0 Edition 1.2 Consolidated Reprint 5621 61812-1 Time relays for industrial and residential use Part 1: Requirements and tests - Edition 2.0 2011 IEC 0 5622 61810-2 Electromechanical elementary relays Part 2: Reliability - Edition 3.0 2011 IEC 0 5623 61810-2-1 Electromechanical elementary relays Part 2-1: Reliability Procedure for the verification of B10 values - Edition 2.0 2011 IEC 0 5624 61821 Electrical installations for lighting and beaconing of aerodromes Maintenance of aeronautical ground lighting constant 2011 IEC 0 current series circuits - Edition 2.0 5625 61837-2 Surface mounted piezoelectric devices for frequency control and selection Standard outlines and terminal lead connections 2011 IEC 0 Part 2: Ceramic enclosures - Edition 2.1 Consolidated Reprint 5626 61850-7-1 Communication networks and systems for power utility automation Part 7-1: Basic communication structure Principles 2011 IEC 0 and models - Edition 2.0 5627 61850-4 Communication networks and systems for power utility automation Part 4: System and project management - Edition 2.0 2011 IEC 0 5628 61937-2 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 2: Burst-info - Edition 2.1 2011 IEC 0 Consolidated Reprint 5629 61936-1 CORR NULL 2011 IEC 0 1 5630 61937-1 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 1: General - Edition 2.1 2011 IEC 0 Consolidated Reprint 5631 61937-10 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 10: Non-linear PCM 2011 IEC 0 bitstreams according to the MPEG-4 audio lossless coding (ALS) format - Edition 1.0 5632 61915-2 Low-voltage switchgear and controlgear Device profiles for networked industrial devices Part 2: Root device profiles for 2011 IEC 0 starters and similar equipment - Edition 1.0 5633 61951-2 Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary sealed cells and batteries for 2011 IEC 0 portable applications Part 2: Nickel-metal hydride - Edition 4.0 5634 61960 NULL 2011 IEC 0 5635 61966-12-1 Multimedia systems and equipment Colour measurement and management Part 12-1: Metadata for identification of colour 2011 IEC 0 gamut (Gamut ID) - Edition 1.0 5636 61869-5 Instrument transformers Part 5: Additional requirements for capacitor voltage transformers - Edition 1.0 2011 IEC 0 5637 61853-1 Photovoltaic (PV) module performance testing and energy rating Part 1: Irradiance and temperature performance 2011 IEC 0 measurements and power rating - Edition 1.0 5638 61869-3 Instrument transformers Part 3: Additional requirements for inductive voltage transformers - Edition 1.0 2011 IEC 0 5639 61850-8-1 Communication networks and systems for power utility automation Part 8-1: Specific communication service mapping 2011 IEC 0 (SCSM) Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 - Edition 2.0 5640 61850-9-2 Communication networks and systems for power utility automation Part 9-2: Specific communication service mapping 2011 IEC 0 (SCSM) Sampled values over ISO/IEC 8802-3 - Edition 2.0 5641 80416-3 Basic principles for graphical symbols for use on equipment Part 3: Guidelines for the application of graphical symbols - 2011 IEC 0 Edition 1.1 Consolidated Reprint 5642 CISPR 16-1-1 NULL 2011 IEC 0 CORR 2 5643 CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: 2011 IEC 0 Emission - Edition 6.0 5644 CISPR 16-4-2 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and 2011 IEC 0 limit modelling Measurement instrumentation uncertainty - Edition 2.1 Consolidated Reprint 5645 CISPR 17 Methods of measurement of the suppression characteristics of passive EMC filtering devices - Edition 2.0 2011 IEC 0 5646 62582-1 Nuclear power plants Instrumentation and control important to safety Electrical equipment condition monitoring methods 2011 IEC 0 Part 1: General - Edition 1.0 5647 62582-2 NULL 2011 IEC 0 5648 62582-4 NULL 2011 IEC 0 5649 62707-1 LED Binning Part 1: General requirements and white grid - Edition 1.0 2011 IEC 0 5650 62489-2 Electroacoustics Audio-frequency induction loop systems for assisted hearing Part 2: Methods of calculating and 2011 IEC 0 measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure - Ed 5651 62496-4 Optical circuit boards Part 4: Interface standards General and guidance - Edition 1.0 2011 IEC 0 5652 62495 Nuclear instrumentation Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube - Edition 1.0 2011 IEC 0 5653 62496-2-1 Optical circuit boards Part 2-1: Measurements Optical attenuation and isolation - Edition 1.0 2011 IEC 0 5654 62496-2-2 Optical circuit boards Part 2-2: Measurements Dimensions of optical circuit boards - Edition 1.0 2011 IEC 0 5655 62496-3 Optical circuit boards Part 3: Performance standards General and guidance - Edition 1.0 2011 IEC 0 5656 62520 Railway applications Electric traction Short-primary type linear induction motors (LIM) fed by power converters - Edition 2011 IEC 0 1.0 5657 62516-2 Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 2: Interactive data services using BIFS - Edition 1.0 2011 IEC 0 5658 62532 Fluorescent induction lamps Safety specifications - Edition 1.1; Consolidated Reprint 2011 IEC 0 5659 62530 SystemVerilog Unified Hardware Design, Specification, and Verification Language - Edition 2.0 2011 IEC 0 5660 62549 Articulated systems and flexible systems for cable guiding - Edition 1.0 2011 IEC 0 5661 62541-8 OPC Unified Architecture - Part 8: Data Access - Edition 2.0 2011 IEC 0 5662 62541-4 OPC unified architecture Part 4: Services - Edition 2.0 2011 IEC 0 5663 62541-5 OPC unified architecture Part 5: Information Model - Edition 2.0 2011 IEC 0 5664 62541-6 OPC unified architecture Part 6: Mappings - Edition 2.0 2011 IEC 0 5665 62561-5 Lightning protection system components (LPSC) Part 5: Requirements for earth electrode inspection housings and earth 2011 IEC 0 electrode seals - Edition 1.0 5666 62561-6 Lightning protection system components (LPSC) Part 6: Requirements for lightning strike counters (LSC) - Edition 1.0 2011 IEC 0 5667 62561-7 Lightning protection system components (LPSC) Part 7: Requirements for earthing enhancing compounds - Edition 1.0 2011 IEC 0 5668 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications - Edition 1.1; 2011 IEC 0 Consolidated Reprint 5669 62554 Sample preparation for measurement of mercury level in fluorescent lamps - Edition 1.0 2011 IEC 0 5670 62571 Digital audiobook file format and player requirements - Edition 1.0 2011 IEC 0 5671 62572-3 Fibre optic active components and devices Reliability standards Part 3: Laser modules used for telecommunication - 2011 IEC 0 Edition 3.0 5672 62574 Audio, video and multimedia systems General channel assignment of multichannel audio - Edition 1.0 2011 IEC 0 5673 62642-6 Alarm systems Intrusion and hold-up systems Part 6: Power supplies - Edition 1.0 2011 IEC 0 5674 62642-8 Alarm systems Intrusion and hold-up systems Part 8: Security fog device/systems - Edition 1.0 2011 IEC 0 5675 62684 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones - 2011 IEC 0 Edition 1.0 5676 62601 Industrial networks Wireless communication network and communication profiles WIA-PA - Edition 2.0 2011 IEC 0 5677 62598 Nuclear instrumentation Constructional requirements and classification of radiometric gauges - Edition 1.0 2011 IEC 0 5678 62604-2 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Part 2: Guidelines for the use - 2011 IEC 0 Edition 1.0 5679 62605 Multimedia systems and equipment Multimedia e-publishing and e-books Interchange format for e-dictionaries - Edition 2011 IEC 0 2.0 5680 62595-1-2 Display lighting unit Part 1-2: Terminology and letter symbols - Edition 2.0 2011 IEC 0 5681 62613-1 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) Part 1: General 2011 IEC 0 requirements - Edition 1.0 5682 62613-2 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional 2011 IEC 0 compatibility and interchangeability requirements for accessories to be used by various types of ships - Edition 2.0 5683 62613-2(2 NULL 2011 IEC 0 5684 62621 Railway applications Fixed installations Electric traction Specific requirements for composite insulators used for 2011 IEC 0 overhead contact line systems - Edition 1.0 5685 62631-1 Dielectric and resistive properties of solid insulating materials Part 1: General - Edition 1.0 2011 IEC 0 5686 62634 Radio data system (RDS) Receiver products and characteristics Methods of measurement - Edition 2.0 2011 IEC 0 5687 62637-1 Battery charging interface for small handheld multimedia devices Part 1: 2 mm barrel interface - Edition 1.0 2011 IEC 0 5688 62637-2 Battery charging interface for small handheld multimedia devices Part 2: 2 mm barrel type interface conformance testing - 2011 IEC 0 Edition 1.0 5689 62640 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses - Edition 2011 IEC 0 1.1; Consolidated Reprint 5690 62439-7 Industrial communication networks High availability automation networks Part 7: Ring-based Redundancy Protocol 2011 IEC 0 (RRP) - Edition 1.0 5691 62442-1 Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps Method of measurement to determine 2011 IEC 0 the total input power of controlgear circuits and the efficiency of the controlgear - Edition 1.0 5692 62386-209 Digital addressable lighting interface Part 209: Particular requirements for control gear Colour control (device type 8) - 2011 IEC 0 Edition 1.0; Includes Access to Additional Content 5693 62386-210 NULL 2011 IEC 0 5694 62423 CORR 1 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household 2011 IEC 0 and similar uses - Edition 2.0 5695 62384 DC or AC supplied electronic control gear for LED modules Performance requirements - Edition 1.1; Consolidated 2011 IEC 0 Reprint 5696 62301 Household electrical appliances Measurement of standby power - Edition 2.0 2011 IEC 0 5697 62343-2 Dynamic modules Part 2: Reliability qualification - Edition 2.0 2011 IEC 0 5698 62208 Empty enclosures for low-voltage switchgear and controlgear assemblies General requirements - Edition 2.0 2011 IEC 0 5699 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 1: General 2011 IEC 0 requirements - Edition 3.0 5700 62196-2 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 2: Dimensional 2011 IEC 0 compatibility and interchangeability requirements for a.c. pin and contact-tube accessories - Edition 2.0 5701 62137-3 Electronics assembly technology Part 3: Selection guidance of environmental and endurance test methods for solder joints 2011 IEC 0 - Edition 1.0 5702 62149-1 Fibre optic active components and devices Performance standards Part 1: General and guidance - Edition 2.0 2011 IEC 0 5703 62109-2 Safety of power converters for use in photovoltaic power systems Part 2: Particular requirements for inverters - Edition 1.0 2011 IEC 0 5704 62115 Electric toys Safety - Edition 2.0 2011 IEC 0 5705 62129-2 Calibration of wavelength/optical frequency measurement instruments Part 2: Michelson interferometer single wavelength 2011 IEC 0 meters - Edition 1.0 5706 62271-103-2 NULL 2011 IEC 0 5707 62271-106 High-voltage switchgear and controlgear Part 106: Alternating current contactors, contactor-based controllers and 2011 IEC 0 motorstarters - Edition 1.0 5708 62271-103 High-voltage switchgear and controlgear Part 103: Switches for rated voltages above 1 kV up to and including 52 kV - 2011 IEC 0 Edition 1.0 5709 62271-1 High-voltage switchgear and controlgear Part 1: Common specifications - Edition 1.1; Consolidated Reprint 2011 IEC 0 5710 62264-5 Enterprise-control system integration - Part 5: Business to manufacturing transactions - Edition 2.0 2011 IEC 0 5711 62253 Photovoltaic pumping systems Design qualification and performance measurements - Edition 1.0 2011 IEC 0 5712 62258-2 Semiconductor die products Part 2: Exchange data formats - Edition 2.0 2011 IEC 0 5713 62246-1 Reed switches Part 1: Generic specification - Edition 3.0 2011 IEC 0 5714 62232 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of 2011 IEC 0 evaluating human exposure - Edition 1.0 5715 62290-2 Railway applications Urban guided transport management and command/control systems Part 2: Functional requirements 2011 IEC 0 specification - Edition 2.0 5716 62282-3-200 Fuel cell technologies Part 3-200: Stationary fuel cell power systems Performance test methods - Edition 2.0 2011 IEC 0 5717 62271-206 High-voltage switchgear and controlgear Part 206: Voltage presence indicating systems for rated voltages above 1 kV and 2011 IEC 0 up to and including 52 kV - Edition 1.0 5718 62271-203 High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 2011 IEC 0 kV - Edition 2.0 5719 62271-200 High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 2011 IEC 0 1 kV and up to and including 52 kV - Edition 2.0 5720 62271-204 High-voltage switchgear and controlgear Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV - 2011 IEC 0 Edition 1.0 5721 IECEX 02A NULL 2011 IEC 0 5722 IECEX 01B NULL 2011 IEC 0 5723 IECEX 05A NULL 2011 IEC 0 5724 IECEX NULL 2011 IEC 0 BULLETIN 5725 IECEX TR NULL 2011 IEC 0 60079-0 5726 IECEX TR NULL 2011 IEC 0 60079-1 5727 IECEX TR NULL 2011 IEC 0 60079-11 5728 IECEX TR NULL 2011 IEC 0 60079-13 5729 IECEX TR NULL 2011 IEC 0 60079-29-4 5730 IECEX TR NULL 2011 IEC 0 60079-35-1 5731 IECEX TR NULL 2011 IEC 0 60079-5 5732 IECEX TR NULL 2011 IEC 0 60079-6 5733 IECEX TR NULL 2011 IEC 0 60079-7 5734 IECEX TR NULL 2011 IEC 0 60079-2 5735 PAS 62326-20 NULL 2011 IEC 0 5736 PAS 62282-6- Fuel cell technologies Part 6-150: Micro fuel cell power systems Safety Water reactive (UN Division 4.3) compounds in 2011 IEC 0 150 indirect PEM fuel cells - Edition 1.0 5737 PAS 62565-2-1 Nanomanufacturing Material specifications Part 2-1: Single-wall carbon nanotubes Blank detail specification - Edition 2011 IEC 0 1.0 5738 PAS 60747-17 Semiconductor devices Discrete devices Part 17: Magnetic and capacitive coupler for basic and reinforced isolation - 2011 IEC 0 Edition 1.0 5739 PAS 61189-3- NULL 2011 IEC 0 913 5740 PAS 61249-6-3 Specification for finished fabric woven from â__Eâ__glass for printed boards - Edition 1.0 2011 IEC 0 5741 PAS 63547 NULL 2011 IEC 0 5742 PAS 62647-21 NULL 2011 IEC 0 5743 PAS 62647-22 NULL 2011 IEC 0 5744 PAS 62647-23 NULL 2011 IEC 0 5745 PAS 62647-3 NULL 2011 IEC 0 5746 PAS 62707-1 NULL 2011 IEC 0 5747 PAS 62717 NULL 2011 IEC 0 5748 PAS 62722-1 NULL 2011 IEC 0 5749 PAS 62722-2-1 NULL 2011 IEC 0 5750 PAS 62722-2-1 NULL 2011 IEC 0 CORR 1 5751 TR 61000-3-14 Electromagnetic compatibility (EMC) Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage 2011 IEC 0 fluctuations and unbalance for the connection of disturbing installations to LV power systems - Edition 1.0 5752 TR 61000-3-15 Electromagnetic compatibility (EMC) Part 3-15: Limits Assessment of low frequency electromagnetic immunity and 2011 IEC 0 emission requirements for dispersed generation systems in LV network - Edition 1.0 5753 TR 61000-2-5 Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic 2011 IEC 0 environments - Edition 3.0 5754 TR 61156-1-3 Multicore and symmetrical pair/quad cables for digital communications Part 1-3: Electrical transmission parameters for 2011 IEC 0 modelling cable assemblies using symmetrical pair/quad cables - Edition 1.0 5755 TR 60825-13 Safety of laser products Part 13: Measurements for classification of laser products - Edition 2.0 2011 IEC 0 5756 TR 60479-4 Effects of current on human beings and livestock Part 4: Effects of lightning strokes - Edition 2.0 2011 IEC 0 5757 TR 60146-1-2 Semiconductor converters General requirements and line commutated converters Part 1-2: Application guide - Edition 4.0 2011 IEC 0 5758 TR 60664-2-1 Insulation coordination for equipment within low-voltage systems Part 2-1: Application guide Explanation of the 2011 IEC 0 application of the IEC 60664 series, dimensioning examples and dielectric testing - Edition 2.0 5759 TR 60664-2-1 CORRIGENDUM 1 Insulation coordination for equipment within low-voltage systems Part 2-1: Application guide 2011 IEC 0 CORR 1 Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing - Edition 2.0 5760 TR 61292-7 Optical amplifiers Part 7: Four wave mixing effect in optical amplifiers - Edition 1.0 2011 IEC 0 5761 TR 61289 High frequency surgical equipment Operation and maintenance - Edition 1.0 2011 IEC 0 5762 TR 62048 Optical fibres Reliability Power law theory - Edition 3.0 2011 IEC 0 5763 TR 61831 On-line analyser systems Guide to design and installation - Edition 2.0 2011 IEC 0 5764 TR 62544 High-voltage direct current (HVDC) systems Application of active filters - Edition 1.1; CONSOLIDATED REPRINT 2011 IEC 0 5765 TR 62543 High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC) - Edition 1.2; 2011 IEC 0 Consolidated Reprint 5766 TR 62470 Guidance on techniques for the measurement of the coefficient of friction (COF) between cables and ducts - Edition 1.0 2011 IEC 0 5767 TR 62368-2 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 2011 IEC 0 62368-1 - Edition 2.0 5768 TR 62343-6-1 Dynamic modules Part 6-1: Dynamic channel equalizers - Edition 1.0 2011 IEC 0 5769 TR 62343-6-5 Dynamic modules Part 6-5: Design guide Investigation of operating mechanical shock and vibration tests for dynamic 2011 IEC 0 modules - Edition 2.0 5770 TR 62343-6-6 Dynamic modules Part 6-6: Design guide Failure mode effect analysis for optical units of dynamic modules - Edition 2.0 2011 IEC 0 5771 TR 62343-6-8 Dynamic modules Part 6-8: Categorization study of dynamic performance requirements - Edition 1.0 2011 IEC 0 5772 TR 62267-2 Railway applications Automated urban guided transport (AUGT) Safety requirements Part 2: Hazard analysis at top 2011 IEC 0 system level - Edition 1.0 5773 TR 62131- NULL 2011 IEC 0 5774 TR 62131-1 Environmental conditions Vibration and shock of electrotechnical equipment Part 1: Process for validation of dynamic 2011 IEC 0 data - Edition 1.0 5775 TR 62131-2 Environmental conditions Vibration and shock of electrotechnical equipment Part 2: Equipment transported in fixed wing 2011 IEC 0 jet aircraft - Edition 1.0 5776 TR 62131-3 Environmental conditions Vibration and shock of electrotechnical equipment Part 3: Equipment transported in rail 2011 IEC 0 vehicles - Edition 1.0 5777 TR 62131-4 Environmental conditions Vibration and shock of electrotechnical equipment Part 4: Equipment transported in road 2011 IEC 0 vehicles - Edition 1.0 5778 TS 61994-4-2 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection 2011 IEC 0 Glossary Part 4-2: Piezoelectric and dielectric materials Piezoelectric ceramics - Edition 2.0 5779 TS 61994-2 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection 2011 IEC 0 Glossary Part 2: Piezoelectric and dielectric filters - Edition 2.0 5780 TS 61994-3 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection 2011 IEC 0 Glossary Part 3: Piezoelectric and dielectric oscillators - Edition 2.0 5781 TS 61968-2 Application integration at electric utilities System interfaces for distribution management Part 2: Glossary - Edition 2.0 2011 IEC 0 5782 TS 61934 Electrical insulating materials and systems Electrical measurement of partial discharges (PD) under short rise time and 2011 IEC 0 repetitive voltage impulses - Edition 2.0 5783 TS 61400-26-1 Wind turbines Part 26-1: Time-based availability for wind turbine generating systems - Edition 1.0 2011 IEC 0 5784 TS 60318-7 Electroacoustics Simulators of human head and ear Part 7: Head and torso simulator for the measurement of air- 2011 IEC 0 conduction hearing aids - Edition 2.0 5785 TR 62691 Optical fibre cables - Guidelines to the installation of optical fibre cables - Edition 2.0 2011 IEC 0 5786 TR 62687 Graphical symbols for use on equipement Vocabulary - Edition 2.0 2011 IEC 0 5787 TR 62696 Luminaires Application of the IK code IEC 62262 - Edition 1.0 2011 IEC 0 5788 TR 62711 Mnemonics and designations of symbols for measuring relays, instruments and related device - Edition 1.0 2011 IEC 0 5789 TR 62712 Professional tape-less camera recorder - Edition 1.0 2011 IEC 0 5790 TR 62728 Display technologies LCD, PDP and OLED Overview and explanation of differences in terminology - Edition 1.0 2011 IEC 0 5791 TR 62627-03- Fibre optic interconnecting devices and passive components Part 03-01: Reliability Design of an acceptance test for fibre 2011 IEC 0 01 pistoning failure of connectors during temperature and humidity cycling: demarcation analysis - Edition 1.0 5792 TR 62627-03- Fibre optic interconnecting devices and passive components Part 03-02: Reliability Report of high power transmission test 2011 IEC 0 02 of specified passive optical components - Edition 1.0 5793 TR 62669 Case studies supporting IEC 62232 Determination of RF field strength and SAR in the vicinity of radiocommunication 2011 IEC 0 base stations for the purpose of evaluating human exposure - Edition 1.0 5794 TS 62332-1 Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Part 1: General 2011 IEC 0 requirements - Edition 2.0 5795 TS 62351-8 Power systems management and associated information exchange Data and communications security Part 8: Role-based 2011 IEC 0 access control - Edition 1.0 5796 TS 62441 Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology 2011 IEC 0 equipment - Edition 2.0 5797 TS 62433-1 EMC IC modelling Part 1: General modelling framework - Edition 1.0 2011 IEC 0 5798 TS 62558 Ultrasonics Real-time pulse-echo scanners Phantom with cylindrical, artificial cysts in tissue-mimicking material and 2011 IEC 0 method for evaluation and periodic testing of 3D-distributions of void-detectability ratio (VDR) - Edition 1.0 5799 TS 62564-1 Process management for avionics Aerospace qualified electronic components (AQEC) Part 1: Integrated circuits and 2011 IEC 0 discrete semiconductors - Edition 3.0 5800 TS 62504 NULL 2011 IEC 0 5801 TS 62597 Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway 2011 IEC 0 environment with respect to human exposure - Edition 1.0 5802 TS 62600-1 Marine energy Wave, tidal and other water current converters Part 1: Terminology - Edition 1.0 2011 IEC 0 5803 TS 62610-2 Mechanical structures for electronic equipment Thermal management for cabinets in accordance with IEC 60297 and IEC 2011 IEC 0 60917 series Part 2: Design guide: Method for the determination of forced air-cooling structure - Edition 1.0 5804 TS 62642-7 Alarm systems Intrusion and hold-up systems Part 7: Application guidelines - Edition 1.0 2011 IEC 0 5805 TS 62657-2 Industrial communication networks Wireless communication network Part 2: Coexistence management - Edition 1.0 2011 IEC 0 5806 60544-5 Electrical insulating materials Determination of the effects of ionizing radiation Part 5: Procedures for assessment of 2011 IEC 0 ageing in service - Edition 2.0 5807 60567 Oil-filled electrical equipment Sampling of gases and analysis of free and dissolved gases Guidance - Edition 4.0 2011 IEC 0 5808 60534-8-2 Industrial-process control valves Part 8-2: Noise considerations Laboratory measurement of noise generated by 2011 IEC 0 hydrodynamic flow through control valves - Edition 2.0 5809 60534-2-1 Industrial-process control valves Part 2-1: Flow capacity Sizing equations for fluid flow under installed conditions - 2011 IEC 0 Edition 2.0 5810 60598-2-3 Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting - Edition 3.1 Consolidated Reprint 2011 IEC 0 5811 60598-2-2 Luminaires Part 2-2: Particular requirements Recessed luminaires - Edition 3.0 2011 IEC 0 5812 60598-2-18 AMENDMENT 1 Luminaires Part 2-18: Particular requirements Luminaires for swimming pools and similar applications 2011 IEC 0 AMD 1 - Edition 2.0 5813 60598-1 CORR Luminaires Part 1: General requirements and tests - Edition 8.0 2011 IEC 0 1 5814 60598-1 CORR LUMINAIRES Part 1: General requirements and tests - Edition 8.0 2011 IEC 0 2 5815 60601-2-31 Medical electrical equipment Part 2-31: Particular requirements for the basic safety and essential performance of external 2011 IEC 0 cardiac pacemakers with internal power source - Edition 2.1 Consolidated Reprint 5816 60601-2-25 Medical electrical equipment Part 2-25: Particular requirements for the basic safety and essential performance of 2011 IEC 0 electrocardiographs - Edition 2.0 5817 60601-2-27 Medical electrical equipment Part 2-27: Particular requirements for the basic safety and essential performance of 2011 IEC 0 electrocardiographic monitoring equipment - Edition 3.0 5818 60601-2-45 Medical electrical equipment Part 2-45: Particular requirements for the basic safety and essential performance of 2011 IEC 0 mammographic X-ray equipment and mammographic stereotactic devices - Edition 3.1; Consolidated Reprint 5819 60601-2-34 Medical electrical equipment Part 2-34: Particular requirements for the basic safety and essential performance of invasive 2011 IEC 0 blood pressure monitoring equipment - Edition 3.0 5820 60601-2-23 Medical electrical equipment Part 2-23: Particular requirements for the basic safety and essential performance of 2011 IEC 0 transcutaneous partial pressure monitoring equipment - Edition 3.0 5821 60603-7 Connectors for electronic equipment Part 7: Detail specification for 8-way, unshielded, free and fixed connectors - Edition 2011 IEC 0 3.1 Consolidated Reprint 5822 60603-7-1 Connectors for electronic equipment Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors - Edition 2011 IEC 0 3.0 5823 60601-2-49 Medical electrical equipment Part 2-49: Particular requirements for the basic safety and essential performance of 2011 IEC 0 multifunction patient monitoring equipment - Edition 2.0 5824 60601-2-57 Medical electrical equipment Part 2-57: Particular requirements for the basic safety and essential performance of non-laser 2011 IEC 0 light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use - Edition 1.0 5825 60512-9-2 Connectors for electronic equipment Tests and measurements Part 9-2: Endurance tests Test 9b: Electrical load and 2011 IEC 0 temperature - Edition 1.0 5826 60512-9-3 Connectors for electronic equipment Tests and measurements Part 9-3: Endurance tests Test 9c: Mechanical operation 2011 IEC 0 (engaging and separating) with electrical load - Edition 2.0 5827 60512-9-4 Connectors for electronic equipment Tests and measurements Part 9-4: Endurance tests Test 9d: Durability of contact 2011 IEC 0 retention system and seals (maintenance, ageing) - Edition 1.0 5828 60519-6 Safety in electroheat installations Part 6: Specifications for safety in industrial microwave heating equipment - Edition 3.0 2011 IEC 0 5829 60512-8-2 Connectors for electronic equipment Tests and measurements Part 8-2: Static load tests (fixed connectors) Test 8b: Static 2011 IEC 0 load, axial - Edition 1.0 5830 60512-8-3 Connectors for electronic equipment Tests and measurements Part 8-3: Static load tests (fixed connectors) Test 8c: 2011 IEC 0 Robustness of actuating lever - Edition 1.0 5831 60512-7-2 Connectors for electronic equipment Tests and measurements Part 7-2: Impact tests (free connectors) Test 7b: 2011 IEC 0 Mechanical strength impact - Edition 1.0 5832 60512-26-100 Connectors for electronic equipment Tests and measurements Part 26-100: Measurement setup, test and reference 2011 IEC 0 arrangements and measurements for connectors according to IEC 60603-7 Tests 26a to 26g - Edition 1.1 Consolidated Reprint 5833 60512-27-100 Connectors for electronic equipment Tests and measurements Part 27-100: Signal integrity tests up to 500 MHz on 60603- 2011 IEC 0 7 series connectors Tests 27a to 27g - Edition 1.0 5834 60512-17-2 Connectors for electronic equipment Tests and measurements Part 17-2: Cable clamping tests Test 17b: Cable clamp 2011 IEC 0 resistance to cable rotation - Edition 1.0 5835 60505 Evaluation and qualification of electrical insulation systems - Edition 4.0 2011 IEC 0 5836 60493-1 Guide for the statistical analysis of ageing test data Part 1: Methods based on mean values of normally distributed test 2011 IEC 0 results - Edition 2.0 5837 60475 Method of sampling insulating liquids - Edition 2.0 2011 IEC 0 5838 60364-7-718 Low-voltage electrical installations Part 7-718: Requirements for special installations or locations Communal facilities 2011 IEC 0 and workplaces - Edition 1.0 5839 60364-7-714 Low-voltage electrical installations Part 7-714: Requirements for special installations or locations External lighting 2011 IEC 0 installations - Edition 2.0 5840 60364-7-715 Low-voltage electrical installations Part 7-715: Requirements for special installations or locations Extra-lowvoltage 2011 IEC 0 lighting installations - Edition 2.0 5841 60384-13 Fixed capacitors for use in electronic equipment Part 13: Sectional specification Fixed polypropylene film dielectric metal 2011 IEC 0 foil d.c. capacitors - Edition 4.0 5842 60350-2 Household electric cooking appliances Part 2: Hobs Methods for measuring performance - Edition 1.0 2011 IEC 0 5843 60350-1 Household electric cooking appliances Part 1: Ranges, ovens, steam ovens and grills Methods for measuring performance 2011 IEC 0 - Edition 2.0 5844 60357 AMD 3 AMENDMENT 3 Tungsten halogen lamps (non-vehicle) Performance specifications - Edition 3.0 2011 IEC 0 5845 60364-4-44 NULL 2011 IEC 0 CORR 2 5846 60352-8 Solderless connections Part 8: Compression mount connections General requirements, test methods and practical guidance 2011 IEC 0 - Edition 1.0 5847 60364-5-54 Low-voltage electrical installations Part 5-54: Selection and erection of electrical equipment Earthing arrangements and 2011 IEC 0 protective conductors - Edition 3.0 5848 60364-5-52 Low-voltage electrical installations Part 5-52: Selection and erection of electrical equipment Wiring systems 2011 IEC 0 CORR 1 CORRIGENDUM 1 - Edition 3.0 5849 60384-22 Fixed capacitors for use in electronic equipment Part 22: Sectional specification Fixed surface mount multilayer capacitors 2011 IEC 0 of ceramic dielectric, Class 2 - Edition 2.0 5850 60384-21 Fixed capacitors for use in electronic equipment Part 21: Sectional specification Fixed surface mount multilayer capacitors 2011 IEC 0 of ceramic dielectric, Class 1 - Edition 2.0 5851 60384-2 Fixed capacitors for use in electronic equipment Part 2: Sectional specification Fixed metallized polyethylene 2011 IEC 0 terephthalate film dielectric d.c. capacitors - Edition 4.0 5852 60400 Lampholders for tubular fluorescent lamps and starterholders - Edition 7.2 Consolidated Reprint 2011 IEC 0 5853 60335-2-95 Household and similar electrical appliances Safety Part 2-95: Particular requirements for drives for vertically moving 2011 IEC 0 garage doors for residential use - Edition 3.1 Consolidated Reprint 5854 60335-2-53 Household and similar electrical appliances Safety Part 2-53: Particular requirements for sauna heating appliances and 2011 IEC 0 infrared cabins - Edition 4.1: Consolidated Reprint 5855 60335-2-37 Household and similar electrical appliances Safety Part 2-37: Particular requirements for commercial electric doughnut 2011 IEC 0 fryers and deep fat fryers - Edition 6.0 5856 60317-3 Specifications for particular types of winding wires Part 3: Polyester enamelled round copper wire, class 155 - Edition 3.1 2011 IEC 0 Consolidated Reprint 5857 60335-2-103 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and 2011 IEC 0 windows - Edition 3.0 5858 60335-1 CORR NULL 2011 IEC 0 2 5859 60050-802 International Electrotechnical Vocabulary Part 802: Ultrasonics - Edition 1.0 2011 IEC 0 5860 60050-617 AMENDMENT 1 International Electrotechnical Vocabulary Part 617: Organization/Market of electricity - Edition 1.0 2011 IEC 0 AMD 1 5861 60061-1 AMD Amendment 45 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2011 IEC 0 45 caps - Edition 3.45 5862 60061-1 AMD Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2011 IEC 0 46 caps - Edition 3.35 5863 60061-1 AMD Amendment 47 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2011 IEC 0 47 caps - Edition 3.35 5864 60061-2 AMD Amendment 42 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2011 IEC 0 42 Lampholders - Edition 3.32 5865 60061-2 AMD Amendment 43 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2011 IEC 0 43 Lampholders - Edition 3.32 5866 60061-2 AMD Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2011 IEC 0 44 Lampholders - Edition 3.32 5867 60061-3 Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2011 IEC 0 - Edition 3.44 Consolidated Reprint 5868 60061-3 AMD Amendment 45 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges 2011 IEC 0 45 - Edition 3.44 5869 60050-113 International Electrotechnical Vocabulary Part 113: Physics for electrotechnology - Edition 1.0 2011 IEC 0 5870 60050-113 CORRIGENDUM 1 International Electrotechnical Vocabulary Part 113: Physics for electrotechnology - Edition 1.0 2011 IEC 0 CORR 1 5871 60034-16-1 Rotating electrical machines Part 16-1: Excitation systems for synchronous machines Definitions - Edition 2.0 2011 IEC 0 5872 60079-35-1 Explosive atmospheres Part 35-1: Caplights for use in mines susceptible to firedamp General requirements Construction 2011 IEC 0 and testing in relation to the risk of explosion - Edition 1.0 5873 60079-35-2 Explosive atmospheres Part 352: Caplights for use in mines susceptible to firedamp Performance and other safety-related 2011 IEC 0 matters - Edition 1.0 5874 60086-1 Primary batteries - Part 1: General - Edition 12.0 2011 IEC 0 5875 60086-2 Primary batteries Part 2: Physical and electrical specifications - Edition 13.0 2011 IEC 0 5876 60086-3 Primary batteries - Part 3: Watch batteries - Edition 4.0 2011 IEC 0 5877 60086-3 CORR NULL 2011 IEC 0 1 5878 60086-5 Primary batteries Part 5: Safety of batteries with aqueous electrolyte - Edition 4.0 2011 IEC 0 5879 60092-353 Electrical installations in ships Part 353: Power cables for rated voltages 1 kV and 3 kV - Edition 4.0 2011 IEC 0 5880 60079-11 Explosive atmospheres Part 11: Equipment protection by intrinsic safety "i" - Edition 6.0 2011 IEC 0 5881 60079-11 NULL 2011 IEC 0 (REDLINE) 5882 60061-4 AMD Amendment 14 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: 2011 IEC 0 14 Guidelines and general information - Edition 1.9 5883 60065 Audio, video and similar electronic apparatus Safety requirements - Edition 8.0 2011 IEC 0 5884 60076-16 Power transformers Part 16: Transformers for wind turbine applications - Edition 1.0 2011 IEC 0 5885 60076-2 Power transformers Part 2: Temperature rise for liquid-immersed transformers - Edition 3.0 2011 IEC 0 5886 60076-21 Power transformers Part 21: Standard requirements, terminology, and test code for step-voltage regulators - Edition 1.0 2011 IEC 0 5887 60079-0 Explosive atmospheres Part 0: Equipment General requirements - Edition 6.0; Incorporates Corrigendum 1: 11/2012 and 2011 IEC 0 Corrigendum 2: 12/2013; Includes Interpretation 1: 11/2013 and Interpretation 2: 10/2014 5888 60079-0 NULL 2011 IEC 0 (REDLINE) 5889 60076-1 Power transformers Part 1: General - Edition 3.0 2011 IEC 0 5890 60068-2-83 Environmental testing Part 2-83: Tests Test Tf: Solderability testing of electronic components for surface mounting 2011 IEC 0 devices (SMD) by the wetting balance method using solder paste - Edition 1.0 5891 60068-3-1 Environmental testing Part 3-1: Supporting documentation and guidance Cold and dry heat tests - Edition 2.0 2011 IEC 0 5892 60071-1 Insulation co-ordination Part 1: Definitions, principles and rules - Edition 8.1 Consolidated Reprint 2011 IEC 0 5893 60127-1 AMD NULL 2011 IEC 0 1 5894 60118-13 Electroacoustics Hearing aids Part 13: Electromagnetic compatibility (EMC) - Edition 4.0 2011 IEC 0 5895 60130-9 Connectors for frequencies below 3 MHz Part 9: Circular connectors for radio and associated sound equipment - Edition 2011 IEC 0 4.0 5896 60092-509 Electrical installations in ships Part 509: Operation of electrical installations - Edition 1.0 2011 IEC 0 5897 60092-504 NULL 2011 IEC 0 CORR 1 5898 60099-8 Surge arresters Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and 2011 IEC 0 distribution lines of a.c. systems above 1 kV - Edition 1.0 5899 60191-2 AMD AMENDMENT 18 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2011 IEC 0 18 5900 60191-6-17 Mechanical standardization of semiconductor devices Part 6-17: General rules for the preparation of outline drawings of 2011 IEC 0 surface mounted semiconductor device packages Design guide for stacked packages Fine-pitch ball grid array and fine- pitch land grid 5901 60191-6-12 Mechanical standardization of semiconductor devices Part 6-12: General rules for the preparation of outline drawings of 2011 IEC 0 surface mounted semiconductor device packages Design guidelines for fine-pitch land grid array (FLGA) - Edition 2.0 5902 60268-16 Sound system equipment Part 16: Objective rating of speech intelligibility by speech transmission index - Edition 4.0 2011 IEC 0 5903 60312-1 NULL 2011 IEC 0 5904 60300-3-12 Dependability management Part 3-12: Application guide Integrated logistic support - Edition 2.0 2011 IEC 0 5905 60227-5 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) - 2011 IEC 0 Edition 3.0 5906 60238 Edison screw lampholders - Edition 9.1 Consolidated Reprint 2011 IEC 0 5907 60245-3 AMD AMENDMENT 2 Rubber insulated cables Rated voltages up to and including 450/750 V Part 3: Heat resistant silicone 2011 IEC 0 2 insulated cables - Edition 2.0 5908 60245-3(2 NULL 2011 IEC 0 5909 60245-4 Rubber insulated cables Rated voltages up to and including 450/750 V Part 4: Cords and flexible cables - Edition 3.0 2011 IEC 0 5910 60794-2-10 Optical fibre cables Part 2-10: Indoor optical fibre cables Family specification for simplex and duplex cables - Edition 2.0 2011 IEC 0 5911 60825-4 Safety of laser products Part 4: Laser guards - Edition 2.2; Consolidated Reprint 2011 IEC 0 5912 60825-1 INT 2 NULL 2011 IEC 0 5913 60819-3-3 Non-cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 3: Unfilled aramid 2011 IEC 0 (aromatic polyamide) papers - Edition 3.0 5914 60840 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV 2011 IEC 0 (Um = 170 kV) Test methods and requirements - Edition 4.0 5915 60840 NULL 2011 IEC 0 (REDLINE) 5916 60838-1 Miscellaneous lampholders Part 1: General requirements and tests - Edition 5.1; Consolidated Reprint 2011 IEC 0 5917 60851-5 Winding wires Test methods Part 5: Electrical properties - Edition 4.1 Consolidated Reprint 2011 IEC 0 5918 60865-1 Short-circuit currents Calculation of effects Part 1: Definitions and calculation methods - Edition 3.0 2011 IEC 0 5919 60874-1 Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 1: Generic 2011 IEC 0 specification - Edition 6.0 5920 60874-1-1 Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 1-1: Blank detail 2011 IEC 0 specification - Edition 3.0 5921 60974-12 Arc welding equipment Part 12: Coupling devices for welding cables - Edition 3.0 2011 IEC 0 5922 60974-13 Arc welding equipment Part 13: Welding clamp - Edition 1.0 2011 IEC 0 5923 60974-10 NULL 2011 IEC 0 CORR 1 5924 60947-8 Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical 2011 IEC 0 machines - Edition 1.2 Consolidated Reprint 5925 60947-4-2 Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters AC semiconductor motor controllers and 2011 IEC 0 starters - Edition 3.0 5926 60947-4-3 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters AC semiconductor controllers and 2011 IEC 0 contactors for non-motor loads - Edition 2.0 5927 60947-1 Low-voltage switchgear and controlgear Part 1: General rules - Edition 5.2 Consolidated Reprint 2011 IEC 0 5928 60929 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps Performance requirements - Edition 4.1; 2011 IEC 0 Consolidated Reprint 5929 60929 CORR 1 NULL 2011 IEC 0 5930 60906-2 IEC system of plugs and socket-outlets for household and similar purposes Part 2: Plugs and socket-outlets 15 A 125 V a.c. 2011 IEC 0 and 20 A 125 V a.c. - Edition 3.0 5931 60904-5 Photovoltaic devices Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the 2011 IEC 0 open-circuit voltage method - Edition 2.0 5932 60893-3-2 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-2: 2011 IEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on epoxy resins - Edition 2.1 Consolidated Repr 5933 60901 AMD 5 AMENDMENT 5 Single-capped fluorescent lamps Performance specifications - Edition 2.0 2011 IEC 0 5934 60747-16-4 Semiconductor devices Part 16-4: Microwave integrated circuits Switches - Edition 1.1 Consolidated Reprint 2011 IEC 0 5935 60747-14-4 Semiconductor devices Discrete devices Part 14-4: Semiconductor accelerometers - Edition 1.0 2011 IEC 0 5936 60745-2-22 Hand-held motor-operated electric tools Safety Part 2-22: Particular requirements for cut-off machines - Edition 1.0 2011 IEC 0 5937 60745-2-13 Hand-held motor-operated electric tools Safety Part 2-13: Particular requirements for chain saws - Edition 2.1 2011 IEC 0 Consolidated Reprint 5938 60730-2-9 Automatic electrical controls Part 2-9: Particular requirements for temperature sensing control - Edition 4.0 2011 IEC 0 5939 60731 Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy - Edition 3.1; Consolidated 2011 IEC 0 Reprint 5940 60754-2 Test on gases evolved during combustion of materials from cables Part 2: Determination of acidity (by pH measurement) 2011 IEC 0 and conductivity - Edition 2.0 5941 60754-1 Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content - 2011 IEC 0 Edition 3.0 5942 60749-7 Semiconductor devices Mechanical and climatic test methods Part 7: Internal moisture content measurement and the 2011 IEC 0 analysis of other residual gases - Edition 2.0 5943 60749-30 Semiconductor devices Mechanical and climatic test methods Part 30: Preconditioning of non-hermetic surface mount 2011 IEC 0 devices prior to reliability testing - Edition 1.1 Consolidated Reprint 5944 60749-29 Semiconductor devices Mechanical and climatic test methods Part 29: Latch-up test - Edition 2.0 2011 IEC 0 5945 60749-40 Semiconductor devices Mechanical and climatic test methods Part 40: Board level drop test method using a strain gauge - 2011 IEC 0 Edition 1.0 5946 60749-21 Semiconductor devices Mechanical and climatic test methods Part 21: Solderability - Edition 2.0 2011 IEC 0 5947 60749-23 Semiconductor devices Mechanical and climatic test methods Part 23: High temperature operating life - Edition 1.1 2011 IEC 0 Consolidated Reprint 5948 60793-1-44 Optical fibres Part 1-44: Measurement methods and test procedures Cut-off wavelength - Edition 2.0 2011 IEC 0 5949 60794-1-1 Optical fibre cables Part 1-1: Generic specification General - Edition 4.0 2011 IEC 0 5950 60793-2-10 Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres - Edition 5.0 2011 IEC 0 5951 60793-2 Optical fibres Part 2: Product specifications General - Edition 8.0 2011 IEC 0 5952 60695-7-2 Fire hazard testing Part 7-2: Toxicity of fire effluent Summary and relevance of test methods - Edition 1.0 2011 IEC 0 5953 60695-7-3 Fire hazard testing Part 7-3: Toxicity of fire effluent Use and interpretation of test results - Edition 1.0 2011 IEC 0 5954 60695-6-2 Fire hazard testing Part 6-2: Smoke obscuration Summary and relevance of test methods - Edition 1.0 2011 IEC 0 5955 60704-2-13 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-13: 2011 IEC 0 Particular requirements for range hoods and other cooking fume extractors - Edition 3.0 5956 60695-11-4 Fire hazard testing Part 11-4: Test flames 50 W flame Apparatus and confirmational test method - Edition 1.0 2011 IEC 0 5957 60704-2-10 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-10: 2011 IEC 0 Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these - Edition 2.0 5958 60704-2-4 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-4: 2011 IEC 0 Particular requirements for washing machines and spin extractors - Edition 3.0 5959 60728-6 Cable networks for television signals, sound signals and interactive services Part 6: Optical equipment - Edition 3.0 2011 IEC 0 5960 60684-2 Flexible insulating sleeving Part 2: Methods of test - Edition 3.0 2011 IEC 0 5961 60684-3-205 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 205: Heat-shrinkable chlorinated 2011 IEC 0 polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 - Edition 1.0 5962 60676 Industrial electroheating equipment Test methods for direct arc furnaces - Edition 3.0 2011 IEC 0 5963 60674-3-8 Plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 8: Balanced biaxially oriented 2011 IEC 0 polyethylene naphthalate (PEN) films used for electrical insulation - Edition 1.1; Consolidate Reprint 5964 60679-6 Quartz crystal controlled oscillators of assessed quality Part 6: Phase jitter measurement method for quartz crystal 2011 IEC 0 oscillators and SAW oscillators Application guidelines - Edition 1.0 5965 60683 Industrial electroheating equipment Test methods for submerged-arc furnaces - Edition 2.0 2011 IEC 0 5966 60684-3-271 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 271: Heat-shrinkable elastomer 2011 IEC 0 sleevings, flame retarded, fluid resistant, shrink ratio 2:1 - Edition 3.0 5967 60684-3-247 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 247: Heatshrinkable, polyolefin 2011 IEC 0 sleeving, dual wall, not flame retarded, thick and medium wall - Edition 1.0 5968 60684-3-247-2 NULL 2011 IEC 0 5969 60664-2-1 NULL 2011 IEC 0 CORR 1 5970 60662 High-pressure sodium vapour lamps Performance specifications - Edition 2.0 2011 IEC 0 5971 60669-2-1 INT NULL 2011 IEC 0 1 5972 60670-1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General 2011 IEC 0 requirements - Edition 2.0 5973 60670-24 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular 2011 IEC 0 requirements for enclosures for housing protective devices and other power dissipating electrical equipment - Edition 2.0 5974 60674-3-1 Plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 1: Biaxially oriented 2011 IEC 0 polypropylene (PP) films for capacitors - Edition 1.1 Consolidated Reprint 5975 61217 Radiotherapy equipment Coordinates, movements and scales - Edition 2.0 2011 IEC 0 5976 61217(2 NULL 2011 IEC 0 5977 61204-3 Low-voltage switch mode power supplies Part 3: Electromagnetic compatibility (EMC) - Edition 3.0 2011 IEC 0 5978 61196-7 Coaxial communication cables Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 2011 IEC 0 15018 Indoor drop cables for systems operating at 5 MHz 3 000 MHz - Edition 1.0 5979 61196-1-304 Coaxial communication cables Part 1-304: Mechanical test methods Impact resistance - Edition 1.0 2011 IEC 0 5980 61196-1-108 Coaxial communication cables Part 1-108: Electrical test methods Test for characteristic impedance, phase and group 2011 IEC 0 delay, electrical length and propagation velocity - Edition 2.0 5981 61169-41 Radio-frequency connectors Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors - Edition 2011 IEC 0 1.0 5982 61169-18 Radio-frequency connectors Part 18: Sectional specification Radio frequency coaxial connectors of type SSMA - Edition 2011 IEC 0 1.0 5983 61169-19 Radio-frequency connectors Part 19: Sectional specification Radio frequency coaxial connectors of type SSMB - Edition 2011 IEC 0 1.0 5984 61169-35 Radio-frequency connectors Part 35: Sectional specification for 2,92 series RF connectors - Edition 1.0 2011 IEC 0 5985 61184 Bayonet lampholders - Edition 4.0 2011 IEC 0 5986 61300-3-39 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-39: 2011 IEC 0 Examinations and measurements Physical contact (PC) optical connector reference plug selection for return loss measurements - Edition 2.0 5987 61300-2-47 NULL 2011 IEC 0 CORR 1 5988 61300-3-45 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-45: 2011 IEC 0 Examinations and measurements Attenuation of random mated multi-fibre connectors - Edition 1.0 5989 61300-3-46 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-46: 2011 IEC 0 Measurement Bore diameter for guide pin in MT ferrules - Edition 1.0 5990 61307 Industrial microwave heating installations Test methods for the determination of power output - Edition 3.0 2011 IEC 0 5991 61314-1 Fibre optic interconnecting devices and passive components Fibre optic fan-outs Part 1: Generic specification - Edition 4.0 2011 IEC 0 5992 61314-1-1 Fibre optic interconnecting devices and passive components Fibre optic fan-outs Part 1-1: Blank detail specification - 2011 IEC 0 Edition 3.0 5993 61274-1 Fibre optic interconnecting devices and passive components Adaptors for fibre optic connectors Part 1: Generic 2011 IEC 0 specification - Edition 3.0 5994 61274-1-1 Fibre optic interconnecting devices and passive components Adaptors for fibre optic connectors Part 1-1: Blank detail 2011 IEC 0 specification - Edition 3.0 5995 61291-4 Optical amplifiers Part 4: Multichannel applications Performance specification template - Edition 3.0 2011 IEC 0 5996 61300-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 1: General and 2011 IEC 0 guidance - Edition 4.0 5997 61290-4-1 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method - Edition 2.0 2011 IEC 0 5998 61290-4-2 Optical amplifiers Test methods Part 4-2: Gain transient parameters Broadband source method - Edition 1.0 2011 IEC 0 5999 61010-1 CORR NULL 2011 IEC 0 1 6000 61010-2-030 NULL 2011 IEC 0 CORR 1 6001 61000-6-3 Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and 2011 IEC 0 light-industrial environments - Edition 2.1; Consolidated Reprint 6002 61000-6-3 INT ELECTROMAGNETIC COMPATIBILITY (EMC) Part 6-3: Generic standards Emission standard for residential, 2011 IEC 0 1 commercial and light-industrial environments - Edition 2.1 6003 61000-6-4 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments - Edition 2011 IEC 0 2.1; Consolidated Reprint 6004 61000-6-4 INT ELECTROMAGNETIC COMPATIBILITY (EMC) Part 6-4: Generic standards Emission standard for industrial 2011 IEC 0 1 environments - Edition 2.1 6005 61000-4-21 Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques Reverberation chamber test 2011 IEC 0 methods - Edition 2.0 6006 61000-4-18 Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques Damped oscillatory wave immunity 2011 IEC 0 test - Edition 1.1; Consolidated Reprint 6007 61000-4-16 Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, 2011 IEC 0 common mode disturbances in the frequency range 0 Hz to 150 kHz - Edition 2.0 6008 61000-3-12 Electromagnetic compatibility (EMC) Part 3-12: Limits Limits for harmonic currents produced by equipment connected to 2011 IEC 0 public low-voltage systems with input current >16 A and â_¤75 A per phase - Edition 2.0 6009 61076-2-106 Connectors for electronic equipment Product requirements Part 2-106: Circular connectors Detail specification for 2011 IEC 0 with screw-locking and degree of protection IP40 or IP65/67 - Edition 1.0 0,75 _أ connectors M 16 6010 61076-2 Connectors for electronic equipment Product requirements Part 2: Sectional specification for circular connectors - Edition 2011 IEC 0 2.0 6011 61076-2-001 Connectors for electronic equipment Product requirements Part 2-001: Circular connectors Blank detail specification - 2011 IEC 0 Edition 2.0 6012 61167 Metal halide lamps Performance specification - Edition 3.0 2011 IEC 0 6013 61162-450 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and 2011 IEC 0 multiple listeners Ethernet interconnection - Edition 1.1; Consolidated Reprint 6014 61148 Terminal markings for valve device stacks and assemblies and for power conversion equipment - Edition 2.0 2011 IEC 0 6015 61156-2 Multicore and symmetrical pair/quad cables for digital communications Part 2: Symmetrical pair/quad cables with 2010 IEC 0 transmission characteristics up to 100 MHz Horizontal floor wiring Sectional specification - Edition 3.0 6016 61156-2-1 Multicore and symmetrical pair/quad cables for digital communications Part 2-1: Horizontal floor wiring Blank detail 2010 IEC 0 specification - Edition 3.0 6017 61097-14 NULL 2010 IEC 0 6018 61099 Insulating liquids Specifications for unused synthetic organic esters for electrical purposes - Edition 2.0 2010 IEC 0 6019 61108-3 Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 3: 2010 IEC 0 Galileo receiver equipment Performance requirements, methods of testing and required test results - Edition 1.0 6020 61158-5-18 Industrial communication networks Fieldbus specifications Part 5-18: Application layer service definition Type 18 2010 IEC 0 elements - Edition 2.0 6021 61158-5-19 Industrial communication networks Fieldbus specifications Part 5-19: Application layer service definition Type 19 2010 IEC 0 elements - Edition 3.0 6022 61158-5-2 Industrial communication networks Fieldbus specifications Part 5-2: Application layer service definition Type 2 elements 2010 IEC 0 - Edition 3.0 6023 61158-5-14 Industrial communication networks Fieldbus specifications Part 5-14: Application layer service definition Type 14 2010 IEC 0 elements - Edition 3.0 6024 61158-5-20 Industrial communication networks Fieldbus specifications Part 5-20: Application layer service definition Type 20 2010 IEC 0 elements - Edition 3.0 6025 61158-5-12 Industrial communication networks Fieldbus specifications Part 5-12: Application layer service definition Type 12 2010 IEC 0 elements - Edition 3.0 6026 61158-5-10 Industrial communication networks Fieldbus specifications Part 5-10: Application layer service definition Type 10 2010 IEC 0 elements - Edition 3.0 6027 61158-4-3 Industrial communication networks Fieldbus specifications Part 4-3: Data-link layer protocol specification Type 3 2010 IEC 0 elements - Edition 3.0 6028 61158-4-21 Industrial communication networks Fieldbus specifications Part 4-21: Data-link layer protocol specification Type 21 2010 IEC 0 elements - Edition 1.0 6029 61158-4-22 Industrial communication networks Fieldbus specifications Part 4-22: Data-link layer protocol specification Type 22 2010 IEC 0 elements - Edition 2.0 6030 61158-4-18 Industrial communication networks Fieldbus specifications Part 4-18: Data-link layer protocol specification Type 18 2010 IEC 0 elements - Edition 2.0 6031 61158-4-19 Industrial communication networks Fieldbus specifications Part 4-19: Data-link layer protocol specification Type 19 2010 IEC 0 elements - Edition 3.0 6032 61158-4-14 Industrial communication networks Fieldbus specifications Part 4-14: Data-link layer protocol specification Type 14 2010 IEC 0 elements - Edition 3.0 6033 61158-4-2 Industrial communication networks Fieldbus specifications Part 4-2: Data-link layer protocol specification Type 2 2010 IEC 0 elements - Edition 3.0 6034 61158-4-11 Industrial communication networks Fieldbus specifications Part 4-11: Data-link layer protocol specification Type 11 2010 IEC 0 elements - Edition 3.0 6035 61158-4-12 Industrial communication networks Fieldbus specifications Part 4-12: Data-link layer protocol specification Type 12 2010 IEC 0 elements - Edition 3.0 6036 61158-3-21 Industrial communication networks Fieldbus specifications Part 3-21: Data-link layer service definition Type 21 elements 2010 IEC 0 - Edition 1.0 6037 61158-3-22 Industrial communication networks Fieldbus specifications Part 3-22: Data-link layer service definition Type 22 elements 2010 IEC 0 - Edition 2.0 6038 61158-3-14 Industrial communication networks Fieldbus specifications Part 3-14: Data-link layer service definition Type 14 elements 2010 IEC 0 - Edition 3.0 6039 61158-3-19 Industrial communication networks Fieldbus specifications Part 3-19: Data-link layer service definition Type 19 elements 2010 IEC 0 - Edition 3.0 6040 61158-3-12 Industrial communication networks Fieldbus specifications Part 3-12: Data-link layer service definition Type 12 elements 2010 IEC 0 - Edition 3.0 6041 61158-2 Industrial communication networks Fieldbus specifications Part 2: Physical layer specification and service definition - 2010 IEC 0 Edition 6.0 6042 61158-6-18 Industrial communication networks Fieldbus specifications Part 6-18: Application layer protocol specification Type 18 2010 IEC 0 elements - Edition 2.0 6043 61158-6-19 Industrial communication networks Fieldbus specifications Part 6-19: Application layer protocol specification Type 19 2010 IEC 0 elements - Edition 3.0 6044 61158-6-14 Industrial communication networks Fieldbus specifications Part 6-14: Application layer protocol specification Type 14 2010 IEC 0 elements - Edition 3.0 6045 61158-5-15 Industrial communication networks Fieldbus specifications Part 5-15: Application layer service definition Type 15 2010 IEC 0 elements - Edition 2.0 6046 61158-6-15 Industrial communication networks Fieldbus specifications Part 6-15: Application layer protocol specification Type 15 2010 IEC 0 elements - Edition 2.0 6047 61158-6-2 Industrial communication networks Fieldbus specifications Part 6-2: Application layer protocol specification Type 2 2010 IEC 0 elements - Edition 3.0 6048 61158-6-20 Industrial communication networks Fieldbus specifications Part 6-20: Application layer protocol specification Type 20 2010 IEC 0 elements - Edition 3.0 6049 61158-6-21 Industrial communication networks Fieldbus specifications Part 6-21: Application layer protocol specification Type 21 2010 IEC 0 elements - Edition 1.0 6050 61158-6-22 Industrial communication networks Fieldbus specifications Part 6-22: Application layer protocol specification Type 22 2010 IEC 0 elements - Edition 2.0 6051 61158-6-12 Industrial communication networks Fieldbus specifications Part 6-12: Application layer protocol specification Type 12 2010 IEC 0 elements - Edition 3.0 6052 61158-5-3 Industrial communication networks Fieldbus specifications Part 5-3: Application layer service definition Type 3 elements 2010 IEC 0 - Edition 3.0 6053 61158-6-10 Industrial communication networks Fieldbus specifications Part 6-10: Application layer protocol specification Type 10 2010 IEC 0 elements - Edition 3.0 6054 61158-5-21 Industrial communication networks Fieldbus specifications Part 5-21: Application layer service definition Type 21 2010 IEC 0 elements - Edition 1.0 6055 61158-5-22 Industrial communication networks Fieldbus specifications Part 5-22: Application layer service definition Type 22 2010 IEC 0 elements - Edition 2.0 6056 61158-6-9 Industrial communication networks Fieldbus specifications Part 6-9: Application layer protocol specification Type 9 2010 IEC 0 elements - Edition 3.0 6057 61158-6-3 Industrial communication networks Fieldbus specifications Part 6-3: Application layer protocol specification Type 3 2010 IEC 0 elements - Edition 3.0 6058 61162-1 Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 1: Single talker and multiple 2010 IEC 0 listeners - Edition 5.0 6059 61162-3 Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 3: Serial data instrument 2010 IEC 0 network - Edition 1.2 Consolidated Reprint 6060 61169-14 Radio-frequency connectors Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw 2010 IEC 0 coupling Characteristic impedance 75 ohms (Type 3,5/12) - Edition 1.0 6061 61029-2-12 Safety of transportable motor-operated electric tools Part 2-12: Particular requirements for threading machines - Edition 2010 IEC 0 1.0 6062 61076-3-118 Connectors for electronic equipment Product requirements Part 3-118: Rectangular connectors Detail specification for a 4 2010 IEC 0 pole plus PE power connector with push-pull coupling - Edition 1.0 6063 61076-2-107 Connectors for electronic equipment Product requirements Part 2107: Detail specification for circular hybrid connectors 2010 IEC 0 M12 with electrical and fibre-optic contacts with screw locking - Edition 1.0 6064 61076-3-101 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital highspeed data applications - Part 2010 IEC 0 CORR 1 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and 6065 61058-2-1 Switches for appliances Part 2-1: Particular requirements for cord switches - Edition 2.0 2010 IEC 0 6066 61058-2-5 Switches for appliances Part 2-5: Particular requirements for change-over selectors - Edition 2.0 2010 IEC 0 6067 61000-4-15 Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques Flickermeter Functional and 2010 IEC 0 design specifications - Edition 2.0 6068 61000-4-15 NULL 2010 IEC 0 (REDLINE) 6069 61000-4-11 INT NULL 2010 IEC 0 1 6070 61000-4-20 Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques Emission and immunity testing in 2010 IEC 0 transverse electromagnetic (TEM) waveguides - Edition 2.0 6071 61000-4-22 Electromagnetic compatibility (EMC) Part 4-22: Testing and measurement techniques Radiated emissions and immunity 2010 IEC 0 measurements in fully anechoic rooms (FARs) - Edition 1.0 6072 61000-4-3 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, 2010 IEC 0 electromagnetic field immunity test - Edition 3.2; Consolidated Reprint; Includes Interpretation 1: 08/2008 6073 61010-2-030 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Particular 2010 IEC 0 requirements for equipment having testing or measuring circuits - Edition 2.0 6074 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements - 2010 IEC 0 Edition 3.1; Consolidated Reprint 6075 61300-2-23 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-23: Tests 2010 IEC 0 Sealing for non-pressurized closures of fibre optic devices - Edition 2.0 6076 61300-2-24 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-24: Tests 2010 IEC 0 Screen testing of ceramic alignment split sleeve by stress application - Edition 2.0 6077 61300-2-1 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests 2010 IEC 0 CORR 1 Vibration (sinusoidal) CORRIGENDUM 1 - Edition 3.0 6078 61300-2-17 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold 2010 IEC 0 - Edition 3.0 6079 61280-2-1 Fibre optic communication subsystem test procedures Part 2-1: Digital systems Receiver sensitivity and overload 2010 IEC 0 measurement - Edition 2.0 6080 61280-1-3 Fibre optic communication subsystem test procedures Part 1-3: General communication subsystems Central wavelength 2010 IEC 0 and spectral width measurement - Edition 2.0 6081 61300-2-9 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - 2010 IEC 0 Shock - Edition 3.0 6082 61300-2-6 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-6: Tests 2010 IEC 0 Tensile strength of coupling mechanism - Edition 2.0 6083 61300-2-47 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-47: Tests 2010 IEC 0 Thermal shocks - Edition 4.0 6084 61300-3-22 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-22: 2010 IEC 0 Examinations and measurements Ferrule compression force - Edition 2.0 6085 61300-3-35 NULL 2010 IEC 0 CORR 1 6086 61169-40 Radio-frequency connectors Part 40: Sectional specification for 2.4 series RF connectors - Edition 1.0 2010 IEC 0 6087 61191-6 Printed board assemblies Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement 2010 IEC 0 method - Edition 1.0 6088 61190-1-3 Attachment materials for electronic assembly Part 1-3: Requirements for electronic grade solder alloys and fluxed and 2010 IEC 0 nonfluxed solid solders for electronic soldering applications - Edition 2.1 Consolidated Reprint 6089 61210 Connecting devices Flat quick-connect terminations for electrical copper conductors Safety requirements - Edition 2.0 2010 IEC 0 6090 61207-1 Expression of performance of gas analyzers Part 1: General - Edition 2.0 2010 IEC 0 6091 61231 International lamp coding system (ILCOS) - Edition 1.1 Consolidated Reprint 2010 IEC 0 6092 61236 Live working Saddles, stick clamps and their accessories - Edition 2.0 2010 IEC 0 6093 61249-2-41 Materials for printed boards and other interconnecting structures Part 2-41: Reinforced base materials clad and unclad 2010 IEC 0 Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-cl 6094 61249-2-42 Materials for printed boards and other interconnecting structures Part 2-42: Reinforced base materials clad and unclad 2010 IEC 0 Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for 6095 60666 Detection and determination of specified additives in mineral insulating oils - Edition 2.0 2010 IEC 0 6096 60664-3 Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for 2010 IEC 0 protection against pollution - Edition 3.0 6097 60664-3 CORR NULL 2010 IEC 0 1 6098 60691 AMD 2 NULL 2010 IEC 0 6099 60684-3-280 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 280: Heatshrinkable, polyolefin 2010 IEC 0 sleeving, anti-tracking - Edition 1.1 Consolidated Reprint 6100 60684-3-281 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 281: Heat-shrinkable, polyolefin 2010 IEC 0 sleeving, semiconductive - Edition 1.0 6101 60684-3-282 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 282: Heat-shrinkable, polyolefin 2010 IEC 0 sleeving Stress control - Edition 1.0 6102 60684-3-283 AMENDMENT 1 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 283: 2010 IEC 0 Heatshrinkable, polyolefin sleeving for bus-bar insulation - Edition 1.1 Consolidated Reprint 6103 60684-3-209 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 209: Heat-shrinkable, polyolefin 2010 IEC 0 sleeving, general purpose, flame retarded - Edition 3.0 6104 60684-3-116 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 116 and 117: Extruded 2010 IEC 0 polychloroprene, general purpose - Edition 3.0 6105 60728-2 Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for 2010 IEC 0 equipment - Edition 2.0 6106 60728-3 Cable networks for television signals, sound signals and interactive services Part 3: Active wideband equipment for cable 2010 IEC 0 networks - Edition 4.0 6107 60728-13 Cable networks for television signals, sound signals and interactive services Part 13: Optical systems for broadcast signal 2010 IEC 0 transmissions - Edition 1.0 6108 60728-13 Cable networks for television signals, sound signals and interactive services Part 13: Optical systems for broadcast signal 2010 IEC 0 CORR 1 transmissions CORRIGENDUM 1 - Edition 1.0 6109 60728-11 Cable networks for television signals, sound signals and interactive services - Part 11: Safety - Edition 4.0 2010 IEC 0 6110 60728-1-1 Cable networks for television signals, sound signals and interactive services Part 1-1: RF cabling for two way home 2010 IEC 0 networks - Edition 2.0 6111 60705 Household microwave ovens Methods for measuring performance - Edition 4.1 Consolidated Reprint 2010 IEC 0 6112 60695-1-11 Fire hazard testing Part 1-11: Guidance for assessing the fire hazard of electrotechnical products Fire hazard assessment - 2010 IEC 0 Edition 2.0 6113 60695-2-12 Fire hazard testing Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFI) test method for 2010 IEC 0 materials - Edition 2.1 Consolidated Reprint 6114 60704-1 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 1: General 2010 IEC 0 requirements - Edition 3.0 6115 60695-6-1 Fire hazard testing Part 6-1: Smoke obscuration General guidance - Edition 2.1 Consolidated Reprint 2010 IEC 0 6116 60695-7-1 Fire hazard testing Part 7-1: Toxicity of fire effluent General guidance - Edition 3.0 2010 IEC 0 6117 60695-2-13 Fire hazard testing Part 2-13: Glowing/hot-wire based test methods Glow-wire ignition temperature (GWIT) test method 2010 IEC 0 for materials - Edition 2.1 Consolidated Reprint 6118 60793-1-41 Optical fibres Part 1-41: Measurement methods and test procedures Bandwidth - Edition 3.0 2010 IEC 0 6119 60770-1 Transmitters for use in industrial-process control systems Part 1: Methods for performance evaluation - Edition 2.0 2010 IEC 0 6120 60770-2 Transmitters for use in industrial-process control systems Part 2: Methods for inspection and routine testing - Edition 3.0 2010 IEC 0 6121 60763-3-1 Laminated pressboard for electrical purposes Part 3: Specifications for individual materials Sheet 1: Requirements for 2010 IEC 0 laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2 - Edition 2.0 6122 60793-1-30 Optical fibres Part 1-30: Measurement methods and test procedures Fibre proof test - Edition 2.0 2010 IEC 0 6123 60793-1-31 Optical fibres Part 1-31: Measurement methods and test procedures Tensile strength - Edition 2.0 2010 IEC 0 6124 60793-1-32 Optical fibres Part 1-32: Measurement methods and test procedures Coating strippability - Edition 2.0 2010 IEC 0 6125 60749-15 Semiconductor devices Mechanical and climatic test methods Part 15: Resistance to soldering temperature for through- 2010 IEC 0 hole mounted devices - Edition 2.0 6126 60749-19 Semiconductor devices Mechanical and climatic test methods Part 19: Die shear strength - Edition 1.1 Consolidated 2010 IEC 0 Reprint 6127 60749-34 Semiconductor devices Mechanical and climatic test methods Part 34: Power cycling - Edition 2.0 2010 IEC 0 6128 60749-32 Semiconductor devices Mechanical and climatic test methods Part 32: Flammability of plastic-encapsulated devices 2010 IEC 0 (externally induced) - Edition 1.1 Consolidated Reprint 6129 60763-1 Laminated pressboard for electrical purposes Part 1: Definitions, classification and general requirements - Edition 2.0 2010 IEC 0 6130 60730-1 Automatic electrical controls Part 1: General requirements - Edition 5.1; Consolidated Reprint 2010 IEC 0 6131 60745-2-14 Hand-held motor-operated electric tools Safety Part 2-14: Particular requirements for planers - Edition 2.2 Consolidated 2010 IEC 0 Reprint 6132 60745-2-17 Hand-held motor-operated electric tools Safety Part 2-17: Particular requirements for routers and trimmers - Edition 3.0 2010 IEC 0 6133 60745-2-5 Hand-held motor-operated electric tools Safety Part 2-5: Particular requirements for circular saws - Edition 5.0 2010 IEC 0 6134 60745-2-19 Hand-held motor-operated electric tools Safety Part 2-19: Particular requirements for jointers - Edition 1.1 Consolidated 2010 IEC 0 Reprint 6135 60737 Nuclear power plants Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit) 2010 IEC 0 Characteristics and test methods - Edition 2.0 6136 60747-14-5 Semiconductor devices Part 14-5: Semiconductor sensors PN-junction semiconductor temperature sensor - Edition 1.0 2010 IEC 0 6137 60747-15 Semiconductor devices Discrete devices Part 15: Isolated power semiconductor devices - Edition 2.0 2010 IEC 0 6138 60747-16-3 Semiconductor devices Part 16-3: Microwave integrated circuits Frequency converters - Edition 1.1 Consolidated Reprint 2010 IEC 0 6139 60747-14-1 Semiconductor devices Part 14-1: Semiconductor sensors Generic specification for sensors - Edition 2.0 2010 IEC 0 6140 60747-1 Semiconductor devices Part 1: General - Edition 2.1 Consolidated Reprint 2010 IEC 0 6141 60747-7 Semiconductor devices Discrete devices Part 7: Bipolar transistors - Edition 3.0 2010 IEC 0 6142 60747-8 Semiconductor devices Discrete devices Part 8: Field-effect transistors - Edition 3.0 2010 IEC 0 6143 60875-1 Fibre optic interconnecting devices and passive components - Non-wavelengthselective fibre optic branching devices - Part 2010 IEC 0 1: Generic specification - Edition 6.0 6144 60917-2-4 Modular order for the development of mechanical structures for electronic equipment practices Part 2-4: Sectional 2010 IEC 0 specification Interface co-ordination dimensions for the 25 mm equipment practice Adaptation dimensions for subracks or chassis applicable 6145 60939-1 Passive filter units for electromagnetic interference suppression Part 1: Generic specification - Edition 3.0 2010 IEC 0 6146 60974-6 Arc welding equipment Part 6: Limited duty equipment - Edition 3.0 2010 IEC 0 6147 60974-4 Arc welding equipment Part 4: Periodic inspection and testing - Edition 3.0 2010 IEC 0 6148 60974-11 Arc welding equipment Part 11: Electrode holders - Edition 3.0 2010 IEC 0 6149 60974-9 Arc welding equipment Part 9: Installation and use - Edition 1.0 2010 IEC 0 6150 60832-1 Live working Insulating sticks and attachable devices Part 1: Insulating sticks - Edition 1.0 2010 IEC 0 6151 60832-2 Live working Insulating sticks and attachable devices Part 2: Attachable devices - Edition 1.0 2010 IEC 0 6152 60825-2 Safety of laser products Part 2: Safety of optical fibre communication systems (OFCS) - Edition 3.2 Consolidated Reprint 2010 IEC 0 6153 60825-2PDF NULL 2010 IEC 0 6154 60794-3-11 Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single- 2010 IEC 0 mode optical fibre telecommunication cables - Edition 2.0 6155 60255-127 Measuring relays and protection equipment Part 127: Functional requirements for over/under voltage protection - Edition 2010 IEC 0 1.0 6156 60252-2 AC motor capacitors Part 2: Motor start capacitors - Edition 2.1; Consolidated Reprint 2010 IEC 0 6157 60252-1 AC motor capacitors Part 1: General Performance, testing and rating Safety requirements Guidance for installation and 2010 IEC 0 operation - Edition 2.1; Consolidated Reprint 6158 60212 Standard conditions for use prior to and during the testing of solid electrical insulating materials - Edition 3.0 2010 IEC 0 6159 60297-3-106 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482, 6 mm (19 in) series Part 2010 IEC 0 3-106: Adaptation dimensions for subracks and chassis applicable to metric cabinets or racks in accordance with IEC 60917-2-1 - Editi 6160 60312-2 NULL 2010 IEC 0 6161 60317-1 Specifications for particular types of winding wires Part 1: Polyvinyl acetal enamelled round copper wire, class 105 - 2010 IEC 0 Edition 4.0 6162 60317-12 Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire, class 120 - 2010 IEC 0 Edition 3.0 6163 60317-13 Specifications for particular types of winding wires Part 13: Polyester or polyesterimide overcoated with polyamide-imide 2010 IEC 0 enamelled round copper wire, class 200 - Edition 3.0 6164 60317-15 Specifications for particular types of winding wires Part 15: Polyesterimide enamelled round aluminium wire, class 180 - 2010 IEC 0 Edition 3.1; Consolidated Reprint 6165 60317-17 Specifications for particular types of winding wires Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 2010 IEC 0 - Edition 3.0 6166 60317-17 PDF NULL 2010 IEC 0 6167 60317-18 Specifications for particular types of winding wires Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 2010 IEC 0 - Edition 3.1; Consolidated Reprint 6168 60268-4 Sound system equipment Part 4: Microphones - Edition 5.0 2010 IEC 0 6169 60269-6 Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy 2010 IEC 0 systems - Edition 1.0 6170 60269-6 CORR CORRIGENDUM 1 Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of solar 2010 IEC 0 1 photovoltaic energy systems - Edition 1.0 6171 60268-7 Sound system equipment Part 7: Headphones and earphones - Edition 3.0 2010 IEC 0 6172 60269-2 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial 2010 IEC 0 application) Examples of standardized systems of fuses A to K - Edition 5.1 Consolidated Reprint 6173 60191-6-20 Mechanical standardization of semiconductor devices Part 6-20: General rules for the preparation of outline drawings of 2010 IEC 0 surface mounted semiconductor device packages Measuring methods for package dimensions of small outline J-lead packages (SOJ) - Editi 6174 60191-6-21 Mechanical standardization of semiconductor devices Part 6-21: General rules for the preparation of outline drawings of 2010 IEC 0 surface mounted semiconductor device packages Measuring methods for package dimensions of small outline packages (SOP) - Edition 1.0 6175 60191-6-18 Mechanical standardization of semiconductor devices Part 6-18: General rules for the preparation of outline drawings of 2010 IEC 0 surface mounted semiconductor device packages Design guide for ball grid array (BGA) - Edition 1.0 6176 60191-6-18 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES Part 6-18: General rules for the preparation 2010 IEC 0 CORR 1 of outline drawings of surface mounted semiconductor device packages Design guide for ball grid array (BGA) CORRIGENDUM 1 - Edition 1.0 6177 60191-6-18 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES Part 6-18: General rules for the preparation 2010 IEC 0 CORR 2 of outline drawings of surface mounted semiconductor device packages Design guide for ball grid array (BGA) CORRIGENDUM 2 - Edition 1.0 6178 60191-6-19 Mechanical standardization of semiconductor devices Part 6-19: Measurement methods of the package warpage at elevated 2010 IEC 0 temperature and the maximum permissible warpage - Edition 1.0 6179 60172 AMD 2 NULL 2010 IEC 0 6180 60172 AMD 2 NULL 2010 IEC 0 6181 60143-4 Series capacitors for power systems Part 4: Thyristor controlled series capacitors - Edition 1.0 2010 IEC 0 6182 60122-3 Quartz crystal units of assessed quality Part 3: Standard outlines and lead connections - Edition 4.0 2010 IEC 0 6183 60127-2 Miniature fuses Part 2: Cartridge fuse-links - Edition 3.0 2010 IEC 0 6184 60068-2-53 Environmental testing Part 2-53: Tests and guidance Combined climatic (temperature/humidity) and dynamic 2010 IEC 0 (vibration/shock) tests - Edition 2.0 6185 60068-2-5 Environmental testing Part 2-5: Tests Test Sa: Simulated solar radiation at ground level and guidance for solar radiation 2010 IEC 0 testing - Edition 2.0 6186 60068-2-5 Environmental testing Part 2-5: Tests Test Sa: Simulated solar radiation at ground level and guidance for solar radiation 2010 IEC 0 CORR 1 testing CORRIGENDUM 1 - Edition 2.0 6187 60061-4 AMD Amendment 13 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: 2010 IEC 0 13 Guidelines and general information - Edition 1.9 6188 60079-15 Explosive atmospheres Part 15: Equipment protection by type of protection "n" - Edition 4.0 2010 IEC 0 6189 60079-13 Explosive atmospheres Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" - 2010 IEC 0 Edition 2.0 6190 60079-29-4 Explosive atmospheres Part 29-4: Gas detectors Performance requirements of open path detectors for flammable gases 2010 IEC 0 CORR 1 CORRIGENDUM 1 - Edition 1.0 6191 60079-19 Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation - Edition 3.1 Consolidated Reprint 2010 IEC 0 6192 60079-20-1 Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification Test methods and data - 2010 IEC 0 Edition 1.0 6193 60079-25 Explosive atmospheres Part 25: Intrinsically safe electrical systems - Edition 2.0 2010 IEC 0 6194 60079-28 NULL 2010 IEC 0 CORR 1 6195 60081 AMD 4 AMENDMENT 4 Double-capped fluorescent lamps Performance specifications - Edition 5.1 2010 IEC 0 6196 60034-1 Rotating electrical machines Part 1: Rating and performance - Edition 13.0 2010 IEC 0 6197 60034-18-1 Rotating electrical machines Part 18-1: Functional evaluation of insulation systems General guidelines - Edition 2.0 2010 IEC 0 6198 60034-18-32 Rotating electrical machines Part 18-32: Functional evaluation of insulation systems Test procedures for form-wound 2010 IEC 0 windings Evaluation by electrical endurance - Edition 1.0 6199 60027-7 Letter symbols to be used in electrical technology Part 7: Power generation, transmission, and distribution - Edition 1.0 2010 IEC 0 6200 60034-2-2 Rotating electrical machines Part 2-2: Specific methods for determining separate losses of large machines from tests 2010 IEC 0 Supplement to IEC 60034-2-1 - Edition 1.0 6201 60050-112 International Electrotechnical Vocabulary Part 112: Quantities and units - Edition 1.0 2010 IEC 0 6202 60050-212 International Electrotechnical Vocabulary Part 212: Electrical insulating solids, liquids, and gases - Edition 2.0 2010 IEC 0 6203 60050-445 International Electrotechnical Vocabulary Part 445: Time relays - Edition 2.0 2010 IEC 0 6204 60050-447 International Electrotechnical Vocabulary Part 447: Measuring relays - Edition 1.0 2010 IEC 0 6205 60060-1 High-voltage test techniques Part 1: General definitions and test requirements - Edition 3.0 2010 IEC 0 6206 60060-2 High-voltage test techniques Part 2: Measuring systems - Edition 3.0 2010 IEC 0 6207 60061-2 AMD Amendment 40 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2010 IEC 0 40 Lampholders - Edition 3.32 6208 60061-2 AMD Amendment 41 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2010 IEC 0 41 Lampholders - Edition 3.32 6209 60061-1 AMD Amendment 43 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2010 IEC 0 43 caps - Edition 3.35 6210 60061-1 AMD Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2010 IEC 0 44 caps - Edition 3.35 6211 60050-732 International Electrotechnical Vocabulary Part 732: Computer network technology - Edition 1.0 2010 IEC 0 6212 60317-8 Specifications for particular types of winding wires Part 8: Polyesterimide enamelled round copper wire, class 180 - 2010 IEC 0 Edition 4.0 6213 60317-57 Specifications for particular types of winding wires Part 57: Polyamide-imide enamelled round copper wire, class 220 - 2010 IEC 0 Edition 1.0 6214 60317-58 Specifications for particular types of winding wires Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 2010 IEC 0 - Edition 1.0 6215 60318-4 Electroacoustics Simulators of human head and ear Part 4: Occluded-ear simulator for the measurement of earphones 2010 IEC 0 coupled to the ear by means of ear inserts - Edition 1.0 6216 60335-1 Household and similar electrical appliances Safety Part 1: General requirements - Edition 5.2; Consolidated Reprint 2010 IEC 0 6217 60335-1 CORR NULL 2010 IEC 0 1 6218 60335-2-109 Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment 2010 IEC 0 appliances - Edition 1.2 Consolidated Reprint 6219 60317-42 Specifications for particular types of winding wires Part 42: Polyester-amide-imide enamelled round copper wire, class 2010 IEC 0 200 - Edition 1.1 Consolidated Reprint 6220 60317-43 Specifications for particular types of winding wires Part 43: Aromatic polyimide tape wrapped round copper wire, class 2010 IEC 0 240 - Edition 1.1 Consolidated Reprint 6221 60317-44 Specifications for particular types of winding wires Part 44: Aromatic polyimide tape wrapped rectangular copper wire, 2010 IEC 0 class 240 - Edition 1.1 Consolidated Reprint 6222 60317-26 AMD AMENDMENT 2 Specifications for particular types of winding wires Part 26: Polyamide-imide enamelled round copper 2010 IEC 0 2 wire, class 200 - Edition 2.0 6223 60317-22 Specifications for particular types of winding wires Part 22: Polyester or polyesterimide enamelled round copper wire 2010 IEC 0 overcoated with polyamide, class 180 - Edition 3.1; Consolidated Reprint 6224 60317-25 Specifications for particular types of winding wires Part 25: Polyester or polyesterimide overcoated with polyamide-imide 2010 IEC 0 enamelled round aluminium wire, class 200 - Edition 3.0 6225 60317-29 AMD AMENDMENT 2 Specifications for particular types of winding wires Part 29: Polyester or polyesterimide overcoated with 2010 IEC 0 2 polyamide-imide enamelled rectangular copper wire, class 200 - Edition 1.0 6226 60335-2-29 Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers - Edition 5.0 2010 IEC 0 6227 60335-2-25 Household and similar electrical appliances Safety Part 2-25: Particular requirements for microwave ovens, including 2010 IEC 0 combination microwave ovens - Edition 6.2 6228 60335-2-90 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens - 2010 IEC 0 Edition 4.0 6229 60404-3 Magnetic materials Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means 2010 IEC 0 of a single sheet tester - Edition 2.2 Consolidated Reprint 6230 60384-26 Fixed capacitors for use in electronic equipment Part 26: Sectional specification Fixed aluminium electrolytic capacitors 2010 IEC 0 with conductive polymer solid electrolyte - Edition 1.0 6231 60384-26-1 Fixed capacitors for use in electronic equipment Part 26-1: Blank detail specification Fixed aluminium electrolytic 2010 IEC 0 capacitors with conductive polymer solid electrolyte Assessment level EZ - Edition 1.0 6232 60364-7-702 Low-voltage electrical installations Part 7-702: Requirements for special installations or locations Swimming pools and 2010 IEC 0 fountains - Edition 3.0 6233 60364-4-42 Low-voltage electrical installations Part 4-42: Protection for safety Protection against thermal effects - Edition 3.1 2010 IEC 0 Consolidated Reprint 6234 60364-4-44 NULL 2010 IEC 0 CORR 1 6235 60349-1 Electric traction Rotating electrical machines for rail and road vehicles Part 1: Machines other than electronic converter- 2010 IEC 0 fed alternating current motors - Edition 2.0 6236 60349-2 Electric traction Rotating electrical machines for rail and road vehicles Part 2: Electronic converter-fed alternating current 2010 IEC 0 motors - Edition 3.0 6237 60368-3 Piezoelectric filters of assessed quality Part 3: Standard outlines and lead connections - Edition 4.0 2010 IEC 0 6238 60502-4 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 2010 IEC 0 36 kV) Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) - Edi 6239 60445 Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals, 2010 IEC 0 conductor terminations and conductors - Edition 5.0 6240 60444-11 Measurement of quartz crystal unit parameters Part 11: Standard method for the determination of the load resonance 2010 IEC 0 frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction - Edition 1.0 6241 60456 Clothes washing machines for household use Methods for measuring the performance - Edition 5.0; Includes 2010 IEC 0 Corrigendum: 09/2011 6242 60461 Time and control code - Edition 4.0 2010 IEC 0 6243 60462 Nuclear instrumentation Photomultiplier tubes for scintillation counting Test procedures - Edition 2.0 2010 IEC 0 6244 60512-17-1 Connectors for electronic equipment Tests and measurements Part 17-1: Cable clamping tests Test 17a: Cable clamp 2010 IEC 0 robustness - Edition 1.0 6245 60512-17-3 Connectors for electronic equipment Tests and measurements Part 17-3: Cable clamping tests Test 17c: Cable clamp 2010 IEC 0 resistance to cable pull (tensile) - Edition 1.0 6246 60512-17-4 Connectors for electronic equipment Tests and measurements Part 17-4: Cable clamping tests Test 17d: Cable clamp 2010 IEC 0 resistance to cable torsion - Edition 1.0 6247 60512-19-1 Connectors for electronic equipment Tests and measurements Part 19-1: Chemical resistance tests Test 19a: Fluid 2010 IEC 0 resistance of pre-insulated crimp barrels - Edition 1.0 6248 60512-22-1 Connectors for electronic equipment Tests and measurements Part 22-1: Capacitance tests Test 22a: Capacitance - Edition 2010 IEC 0 1.0 6249 60512-21-1 Connectors for electronic equipment Tests and measurements Part 21-1: RF resistance tests Test 21a: RF shunt resistance 2010 IEC 0 - Edition 1.0 6250 60512-20-3 Connectors for electronic equipment Tests and measurements Part 20-3: Fire hazard tests Test 20c: Flammability, glow- 2010 IEC 0 wire - Edition 1.0 6251 60512-20-1 Connectors for electronic equipment Tests and measurements Part 20-1: Fire hazard tests Test 20a: Flammability, needle- 2010 IEC 0 flame - Edition 1.0 6252 60512-24-1 Connectors for electronic equipment Tests and measurements Part 24-1: Magnetic interference tests Test 24a: Residual 2010 IEC 0 magnetism - Edition 1.0 6253 60512-23-2 Connectors for electronic equipment Tests and measurements Part 23-2: Screening and filtering tests Test 23b: 2010 IEC 0 Suppression characteristics of integral filters - Edition 1.0 6254 60512-7-1 Connectors for electronic equipment Tests and measurements Part 7-1: Impact tests (free connectors) Test 7a: Free fall 2010 IEC 0 (repeated) - Edition 1.0 6255 60512-8-1 Connectors for electronic equipment Tests and measurements Part 8-1: Static load tests (fixed connectors) Test 8a: Static 2010 IEC 0 load, transverse - Edition 1.0 6256 60526 CORR 1 High-voltage cable plug and socket connections for medical X-ray equipment CORRIGENDUM 1 - Edition 2.0 2010 IEC 0 6257 60512-9-5 Connectors for electronic equipment Tests and measurements Part 9-5: Endurance tests Test 9e: Current loading, cyclic - 2010 IEC 0 Edition 1.0 6258 60519-1 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements - Edition 5.0 2010 IEC 0 6259 60512-9-1 Connectors for electronic equipment Tests and measurements Part 9-1: Endurance tests Test 9a: Mechanical operation - 2010 IEC 0 Edition 1.0 6260 60601-2-52 NULL 2010 IEC 0 CORR 1 6261 60601-2-54 NULL 2010 IEC 0 CORR 1 6262 60601-2-54(2 NULL 2010 IEC 0 6263 60601-2-8 Medical electrical equipment Part 2-8: Particular requirements for the basic safety and essential performance of therapeutic 2010 IEC 0 X-ray equipment operating in the range 10 kV to 1 MV - Edition 2.1; Consolidated Reprint 6264 60603-7-2 Connectors for electronic equipment Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for 2010 IEC 0 data transmissions with frequencies up to 100 MHz - Edition 2.0 6265 60603-7-3 Connectors for electronic equipment Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data 2010 IEC 0 transmission with frequencies up to 100 MHz - Edition 2.0 6266 60603-7-4 Connectors for electronic equipment Partie 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for 2010 IEC 0 data transmission with frequencies up to 250 MHz - Edition 2.0 6267 60603-7-41 Connectors for electronic equipment Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for 2010 IEC 0 data transmissions with frequencies up to 500 MHz - Edition 1.0 6268 60603-7-5 Connectors for electronic equipment Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data 2010 IEC 0 transmission with frequencies up to 250 MHz - Edition 2.0 6269 60603-7-51 Connectors for electronic equipment Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data 2010 IEC 0 transmissions with frequencies up to 500 MHz - Edition 1.0 6270 60603-7-7 Connectors for electronic equipment Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data 2010 IEC 0 transmission with frequencies up to 600 MHz - Edition 3.0 6271 60603-7-71 Connectors for electronic equipment Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data 2010 IEC 0 transmission with frequencies up to 1 000 MHz - Edition 1.0 6272 60613 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis - Edition 3.0 2010 IEC 0 6273 60613 PDF NULL 2010 IEC 0 6274 60601-1-2 INT NULL 2010 IEC 0 1 6275 60601-2-50 NULL 2010 IEC 0 CORR 1 6276 60601-2-46 Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of 2010 IEC 0 operating tables - Edition 3.0 6277 60601-2-43 Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray 2010 IEC 0 equipment for interventional procedures - Edition 2.1; Consolidated Reprint 6278 60601-2-28 Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray 2010 IEC 0 tube assemblies for medical diagnosis - Edition 2.0 6279 60601-2-4 Medical electrical equipment Part 2-4: Particular requirements for the basic safety and essential performance of cardiac 2010 IEC 0 defibrillators - Edition 3.0 6280 60598-2-20 Luminaires Part 2-20: Particular requirements Lighting chains - Edition 4.0 2010 IEC 0 6281 60601-1-6 Medical electrical equipment Part 1-6: General requirements for basic safety and essential performance Collateral 2010 IEC 0 standard: Usability - Edition 3.1 Consolidated Reprint 6282 60601-1-11 Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance Collateral 2010 IEC 0 Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment - Edition 2 6283 60532 Radiation protection instrumentation Installed dose rate meters, warning assemblies and monitors X and gamma radiation 2010 IEC 0 of energy between 50 keV and 7 MeV - Edition 3.0 6284 60534-7 Industrial-process control valves Part 7: Control valve data sheet - Edition 2.0 2010 IEC 0 6285 60534-8-3 Industrial-process control valves Part 8-3: Noise considerations Control valve aerodynamic noise prediction method - 2010 IEC 0 Edition 3.0 6286 60539-2 Directly heated negative temperature coefficient thermistors Part 2: Sectional specification Surface mount negative 2010 IEC 0 temperature coefficient thermistors - Edition 1.1 Consolidated Reprint 6287 60546-1 Controllers with analogue signals for use in industrial-process control systems Part 1: Methods of evaluating the 2010 IEC 0 performance - Edition 3.0 6288 60546-2 Controllers with analogue signals for use in industrial-process control systems Part 2: Guidance for inspection and routine 2010 IEC 0 testing - Edition 2.0 6289 TS 62666 Guidelines for the inclusion of documentation aspects in product standards - Edition 2.0 2010 IEC 0 6290 TS 62579 Multimedia home server systems Conceptual model for domain management - Edition 1.0 2010 IEC 0 6291 TS 62351-7 Power systems management and associated information exchange Data and communications security Part 7: Network and 2010 IEC 0 system management (NSM) data object models - Edition 1.0 6292 TS 62282-7-1 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) - 2010 IEC 0 Edition 2.0 6293 TS 62271-304 High-voltage switchgear and controlgear Part 304: Design classes for indoor enclosed switchgear and controlgear for rated 2010 IEC 0 CORR 1 voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions CORRIGENDUM 1 - Edition 1.0 6294 TS 62282-1 Fuel cell technologies Part 1: Terminology - Edition 3.0 2010 IEC 0 6295 TS 62257-7-1 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-1: Generators 2010 IEC 0 Photovoltaic generators - Edition 2.0 6296 X61076-3-118 NULL 2010 IEC 0 6297 TR 62649 Requirements for measurement standards for high intensity therapeutic ultrasound (HITU) devices - Edition 1.0 2010 IEC 0 6298 TR 62652 Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af 2010 IEC 0 (power-over-ethernet) applications - Edition 1.0 6299 TR 62581 Electrical steel Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test 2010 IEC 0 specimens - Edition 1.0 6300 TR 62662 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials - 2010 IEC 0 Edition 1.0 6301 TR 62627-02 Fibre optic interconnecting devices and passive components Part 02: Report of round robin test results on SC plug style 2010 IEC 0 fixed attenuators - Edition 1.0 6302 TR 62630 Guidance for evaluating exposure from multiple electromagnetic sources - Edition 1.0 2010 IEC 0 6303 TR 62685 Industrial communication networks Profiles Assessment guideline for safety devices using IEC 61784-3 functional safety 2010 IEC 0 communication profiles (FSCPs) - Edition 1.0 6304 TR 62678 Audio, video and multimedia systems and equipment activities and considerations related to accessibility and usability - 2010 IEC 0 Edition 1.0 6305 TS 60034-31 Rotating electrical machines Part 31: Selection of energy-efficient motors including variable speed applications 2010 IEC 0 Application guide - Edition 1.0 6306 TS 60034-18-33 Rotating electrical machines Part 18-33: Functional evaluation of insulation systems Test procedures for form-wound 2010 IEC 0 windings Multifactor evaluation by endurance under simultaneous thermal and electrical stresses - Edition 2.0 6307 TS 60349-3 Electric traction Rotating electrical machines for rail and road vehicles Part 3: Determination of the total losses of 2010 IEC 0 converter-fed alternating current motors by summation of the component losses - Edition 2.0 6308 TS 61000-3-5 Electromagnetic compatibility (EMC) Part 3-5: Limits Limitation of voltage fluctuations and flicker in low-voltage power 2010 IEC 0 CORR 2 supply systems for equipment with rated current greater than 75 A CORRIGENDUM 2 - Edition 2.0 6309 TS 61800-8 Adjustable speed electrical power drive systems Part 8: Specification of voltage on the power interface - Edition 1.0 2010 IEC 0 6310 TS 61994-4-4 Piezoelectric and dielectric devices for frequency control and selection Glossary Part 4-4: Materials Materials for surface 2010 IEC 0 acoustic wave (SAW) devices - Edition 2.0 6311 TR 62153-4-1 NULL 2010 IEC 0 6312 TR 62258-3 Semiconductor die products Part 3: Recommendations for good practice in handling, packing and storage - Edition 2.0 2010 IEC 0 6313 TR 62343-6-3 Dynamic modules Part 6-3: Round robin measurement results for group delay ripple of tunable dispersion compensators - 2010 IEC 0 Edition 1.0 6314 TR 62283 Optical fibres Guidance for nuclear radiation tests - Edition 2.0 2010 IEC 0 6315 TR 62271-302 High-voltage switchgear and controlgear Part 302: Alternating current circuit-breakers with intentionally non-simultaneous 2010 IEC 0 pole operation - Edition 1.0 6316 TR 62278-3 Railway applications Specification and demonstration of reliability, availability, maintainability and safety (RAMS) Part 2010 IEC 0 3: Guide to the application of IEC 62278 for rolling stock RAM - Edition 1.0 6317 TR 62433-2-1 EMC IC modelling Part 2-1: Theory of black box modelling for conducted emission - Edition 1.0 2010 IEC 0 6318 TR 62362 Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics 2010 IEC 0 Guidance - Edition 1.0 6319 TR 62541-1 OPC unified architecture Part 1: Overview and concepts - Edition 2.0 2010 IEC 0 6320 TR 62541-2 OPC Unified Architecture Part 2: Security Model - Edition 2.0 2010 IEC 0 6321 TR 62617 Home laundry appliances Uncertainty reporting of measurements - Edition 2.0 2010 IEC 0 6322 TR 62627-01 Fibre optic interconnecting devices and passive components Part 01: Fibre optic connector cleaning methods - Edition 2.0 2010 IEC 0 6323 TR 62476 Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products - Edition 2010 IEC 0 1.0 6324 TR 61850-90-1 Communication networks and systems for power utility automation Part 90-1: Use of IEC 61850 for the communication 2010 IEC 0 between substations - Edition 1.0 6325 TR 62000 Guideline for combining different single-mode fibres types - Edition 2.0 2010 IEC 0 6326 TR 61967-1-1 Integrated circuits Measurement of electromagnetic emissions Part 1-1: General conditions and definitions Near-field 2010 IEC 0 scan data exchange format - Edition 2.0 6327 TR 62061-1 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery - 2010 IEC 0 Edition 1.0 6328 TR 61341 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps - Edition 2.0 2010 IEC 0 6329 TR 61491 NULL 2010 IEC 0 6330 TR 61292-4 Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, 2010 IEC 0 including Raman amplifiers - Edition 3.0 6331 TR 61292-6 Optical amplifiers Part 6: Distributed Raman amplification - Edition 1.0 2010 IEC 0 6332 TR 60269-5 Low-voltage fuses Part 5: Guidance for the application of low-voltage fuses - Edition 2.0 2010 IEC 0 6333 TR 60493-2 Guide for the statistical analysis of ageing test data Part 2: Validation of procedures for statistical analysis of censored 2010 IEC 0 normally distributed data - Edition 1.0; Includes Access to Additional Content 6334 TR 60825-17 Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power 2010 IEC 0 optical fibre communication systems - Edition 2.0 6335 TR 61000-3-13 Electromagnetic compatibility (EMC) Part 3-13: Limits Assessment of emission limits for the connection of unbalanced 2010 IEC 0 CORR 1 installations to MV, HV and EHV power systems CORRIGENDUM 1 - Edition 1.0 6336 TR 60887 Glass bulb designation system for lamps - Edition 3.0 2010 IEC 0 6337 QAFQ60317-44 NULL 2010 IEC 0 6338 PAS 61338-1-5 NULL 2010 IEC 0 6339 PAS 61076-2- NULL 2010 IEC 0 109 6340 PAS 61076-2- Connectors for electronic equipment Product requirements Part 2-110: Circular connectors Detail specification for 2010 IEC 0 with screw-locking, for high speed Ethernet and high speed data communication with 1 _أ circular connectors M 12 110 frequencies up to 500 MHz 6341 PAS 61156-1-4 Multicore and symmetrical pair/quad cables for digital communications Part 1-4: Symmetrical pair/quad cables with 2010 IEC 0 transmission characteristics up to 1 000 MHz Conductor heating of bundled data grade cables for limited power transmission based on IEEE 80 6342 PAS 62326-14 NULL 2010 IEC 0 6343 IECEX TR NULL 2010 IEC 0 60079-15 6344 IECEX 02 NULL 2010 IEC 0 6345 IECEX 03 NULL 2010 IEC 0 6346 IECQ 001002-2 NULL 2010 IEC 0 AMD 1 6347 IECQ 04-1 NULL 2010 IEC 0 6348 IECQ 04-5 Standard Training Part 5: Standard operational procedures for conducting IECQ HSPM Training - Edition 1.0 2010 IEC 0 6349 62109-1 Safety of power converters for use in photovoltaic power systems Part 1: General requirements - Edition 1.0 2010 IEC 0 6350 62148-2 Fibre optic active components and devices Package and interface standards Part 2: SFF 10-pin transceivers - Edition 2.0 2010 IEC 0 6351 62148-3 Fibre optic active components and devices Package and interface standards Part 3: SFF 20-pin transceivers - Edition 2.0 2010 IEC 0 6352 62132-2 Integrated circuits Measurement of electromagnetic immunity Part 2: Measurement of radiated immunity TEM cell and 2010 IEC 0 wideband TEM cell method - Edition 1.0 6353 62149-4 Fibre optic active components and devices Performance standards Part 4: 1 300 nm fibre optic transceivers for Gigabit 2010 IEC 0 Ethernet application - Edition 2.0 6354 62150-2 Fibre optic active components and devices Test and measurement procedures Part 2: ATM-PON transceivers - Edition 2.0 2010 IEC 0 6355 62209-2 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Human 2010 IEC 0 models, instrumentation, and procedures Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices us 6356 62209-2 CORR Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Human 2010 IEC 0 1 models, instrumentation, and procedures Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices us 6357 62343-3-1 Dynamic modules Part 3-1: Performance specification templates Dynamic channel equalizers - Edition 2.0 2010 IEC 0 6358 62359 Ultrasonics Field characterization Test methods for the determination of thermal and mechanical indices related to 2010 IEC 0 medical diagnostic ultrasonic fields - Edition 2.0 6359 62368-1 Audio/video, information and communication technology equipment Part 1: Safety requirements - Edition 2.0 2010 IEC 0 6360 62368-1 CORR Audio/video, information and communication technology equipment Part 1: Safety requirements - Edition 2.0 2010 IEC 0 1 6361 62333-3 Noise suppression sheet for digital devices and equipment Part 3: Characterization of parameters of noise suppression 2010 IEC 0 sheet - Edition 1.0 6362 62329-3-100 Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and 2010 IEC 0 compatibility performance Sheet 100: Heat-shrinkable moulded shape dimensions - Edition 1.0 6363 62329-3-101 Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and 2010 IEC 0 compatibility performance Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and 6364 62329-3-102 Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and 2010 IEC 0 compatibility performance Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance - 6365 62317-2 Ferrite cores Dimensions Part 2: Pot-cores for use in telecommunications, power supply, and filter applications - Edition 2010 IEC 0 1.0 6366 62305-1 Protection against lightning Part 1: General principles - Edition 2.0 2010 IEC 0 6367 62305-2 Protection against lightning Part 2: Risk management - Edition 2.0 2010 IEC 0 6368 62305-3 Protection against lightning Part 3: Physical damage to structures and life hazard - Edition 2.0 2010 IEC 0 6369 62305-4 Protection against lightning Part 4: Electrical and electronic systems within structures - Edition 2.0 2010 IEC 0 6370 62415 Semiconductor devices Constant current electromigration test - Edition 1.0 2010 IEC 0 6371 62416 Semiconductor devices Hot carrier test on MOS transistors - Edition 1.0 2010 IEC 0 6372 62417 Semiconductor devices Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) - Edition 1.0 2010 IEC 0 6373 62418 Semiconductor devices Metallization stress void test - Edition 1.0 2010 IEC 0 6374 62376 NULL 2010 IEC 0 6375 62374-1 Semiconductor devices Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers - Edition 1.0 2010 IEC 0 6376 62443-2-1 Industrial communication networks Network and system security Part 2-1: Establishing an industrial automation and 2010 IEC 0 control system security program - Edition 1.0 6377 62439-2 Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) - 2010 IEC 0 Edition 2.0 6378 62438 Radiation protection instrumentation Mobile instrumentation for the measurement of photon and neutron radiation in the 2010 IEC 0 environment - Edition 1.0 6379 62439-1 Industrial communication networks High availability automation networks Part 1: General concepts and calculation 2010 IEC 0 methods - Edition 1.2; Consolidated Reprint 6380 62439-4 Industrial communication networks High availability automation networks Part 4: Cross-network Redundancy Protocol 2010 IEC 0 (CRP) - Edition 1.0 6381 62439-5 Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) - 2010 IEC 0 Edition 2.0 6382 62439-6 Industrial communication networks High availability automation networks Part 6: Distributed Redundancy Protocol 2010 IEC 0 (DRP) - Edition 1.0 6383 62444 Cable glands for electrical installations - Edition 1.0 2010 IEC 0 6384 62455 Internet protocol (IP) and transport stream (TS) based service access - Edition 2.0 2010 IEC 0 6385 62479 Assesment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human 2010 IEC 0 exposure to electromagnetic fields (10 MHz to 300 GHz) - Edition 1.0 6386 62475 High-current test techniques Definitions and requirements for test currents and measuring systems - Edition 1.0 2010 IEC 0 6387 62463 Radiation protection instrumentation X-ray systems for the screening of persons for security and the carrying of illicit 2010 IEC 0 items - Edition 1.0 6388 62464-2 Magnetic resonance equipment for medical imaging Part 2: Classification criteria for pulse sequences - Edition 1.0 2010 IEC 0 6389 62465 Nuclear power plants Instrumentation and control important to safety Management of ageing of electrical cabling systems 2010 IEC 0 - Edition 1.0 6390 62458 Sound system equipment Electroacoustical transducers Measurement of large signal parameters - Edition 1.0 2010 IEC 0 6391 62459 Sound system equipment Electroacoustical transducers Measurement of suspension parts - Edition 1.0 2010 IEC 0 6392 62614 Fibre optics Launch condition requirements for measuring multimode attenuation - Edition 1.0 2010 IEC 0 6393 62615 Electrostatic discharge sensitivity testing Transmission line pulse (TLP) Component level - Edition 1.0 2010 IEC 0 6394 62616 Maritime navigation and radiocommunication equipment and systems Bridge navigational watch alarm system (BNWAS) 2010 IEC 0 - Edition 1.0 6395 62589 Railway applications Fixed installations Harmonisation of the rated values for converter groups and tests on converter 2010 IEC 0 groups - Edition 1.0 6396 62590 Railway applications Fixed installations Electronic power converters for substations - Edition 1.0 2010 IEC 0 6397 62591 Industrial networks - Wireless communication network and communication profiles - WirelessHART - Edition 2.0 2010 IEC 0 6398 62599-1 Alarm systems Part 1: Environmental test methods - Edition 1.0 2010 IEC 0 6399 62599-2 Alarm systems Part 2: Electromagnetic compatibility Immunity requirements for components of fire and security alarm 2010 IEC 0 systems - Edition 1.0 6400 62642-1 Alarm systems Intrusion and hold-up systems Part 1: System requirements - Edition 1.0 2010 IEC 0 6401 62642-2-2 Alarm systems Intrusion and hold-up systems Part 2-2: Intrusion detectors Passive infrared detectors - Edition 1.0 2010 IEC 0 6402 62642-2-3 Alarm systems Intrusion and hold-up systems Part 2-3: Intrusion detectors Microwave detectors - Edition 1.0 2010 IEC 0 6403 62642-2-4 Alarm systems Intrusion and hold-up systems Part 2-4: Intrusion detectors Combined passive infrared / Microwave 2010 IEC 0 detectors - Edition 1.0 6404 62642-2-5 Alarm systems Intrusion and hold-up systems Part 2-5: Intrusion detectors Combined passive infrared / Ultrasonic 2010 IEC 0 detectors - Edition 1.0 6405 62642-2-6 Alarm systems Intrusion and hold-up systems Part 2-6: Intrusion detectors Opening contacts (magnetic) - Edition 1.0 2010 IEC 0 6406 62642-3 Alarm systems Intrusion and hold-up systems Part 3: Control and indicating equipment - Edition 1.0 2010 IEC 0 6407 62642-4 Alarm systems Intrusion and hold-up systems Part 4: Warning devices - Edition 1.0 2010 IEC 0 6408 62642-5-3 Alarm systems Intrusion and hold-up systems Part 5-3: Interconnections Requirements for equipment using radio 2010 IEC 0 frequency techniques - Edition 1.0 6409 62660-1 Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing - Edition 1.0 2010 IEC 0 6410 62660-2 Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing - Edition 1.0 2010 IEC 0 6411 62562 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates - Edition 1.0 2010 IEC 0 6412 62561-4 Lightning protection system components (LPSC) Part 4: Requirements for conductor fasteners - Edition 1.0 2010 IEC 0 6413 62514 Multimedia gateway in home networks Guidelines - Edition 1.0 2010 IEC 0 6414 62533 Radiation protection instrumentation Highly sensitive hand-held instruments for photon detection of radioactive material - 2010 IEC 0 Edition 1.0 6415 62534 Radiation protection instrumentation Highly sensitive hand-held instruments for neutron detection of radioactive material - 2010 IEC 0 Edition 1.0 6416 62537 Interface for loudspeakers with digital input signals based on IEC 60958 - Edition 1.0 2010 IEC 0 6417 62541-3 OPC unified architecture Part 3: Address Space Model - Edition 2.0 2010 IEC 0 6418 62507-1 Identification systems enabling unambiguous information interchange Requirements Part 1: Principles and methods - 2010 IEC 0 Edition 1.0 6419 62508 Guidance on human aspects of dependability - Edition 1.0 2010 IEC 0 6420 62509 Battery charge controllers for photovoltaic systems Performance and functioning - Edition 1.0 2010 IEC 0 6421 62523 Radiation protection instrumentation Cargo/vehicle radiographic inspection system - Edition 1.0 2010 IEC 0 6422 62523 PDF NULL 2010 IEC 0 6423 62502 Analysis techniques for dependability Event tree analysis (ETA) - Edition 1.0 2010 IEC 0 6424 62497-2 Railway applications Insulation coordination Part 2: Overvoltages and related protection - Edition 1.0 2010 IEC 0 6425 62498-1 Railway applications Environmental conditions for equipment Part 1: Equipment on board rolling stock - Edition 1.0 2010 IEC 0 6426 62498-1 CORR Railway applications Environmental conditions for equipment Part 1: Equipment on board rolling stock 2010 IEC 0 1 CORRIGENDUM 1 - Edition 1.0 6427 62498-2 Railway applications Environmental conditions for equipment Part 2: Fixed electrical installations - Edition 1.0 2010 IEC 0 6428 62498-2 CORR Railway applications Environmental conditions for equipment Part 2: Fixed electrical installations CORRIGENDUM 1 - 2010 IEC 0 1 Edition 1.0 6429 62498-3 Railway applications Environmental conditions for equipment Part 3: Equipment for signalling and telecommunications - 2010 IEC 0 Edition 1.0 6430 62498-3 CORR Railway applications Environmental conditions for equipment Part 3: Equipment for signalling and telecommunications 2010 IEC 0 1 CORRIGENDUM 1 - Edition 1.0 6431 62490-1 ESL measuring method Part 1: Capacitors with lead terminal for use in electronic equipment - Edition 1.0 2010 IEC 0 6432 62490-2 ESL measuring method Part 2: Surface mount capacitors for use in electronic equipment - Edition 1.0 2010 IEC 0 6433 62489-1 Electroacoustics Audio-frequency induction loop systems for assisted hearing Part 1: Methods of measuring and 2010 IEC 0 specifying the performance of system components - Edition 1.1; Consolidated Reprint 6434 62481-3 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 3: Link protection - 2010 IEC 0 Edition 2.0 6435 62485-2 Safety requirements for secondary batteries and battery installations Part 2: Stationary batteries - Edition 1.0 2010 IEC 0 6436 62485-3 Safety requirements for secondary batteries and battery installations Part 3: Traction batteries - Edition 2.0 2010 IEC 0 6437 62484 Radiation protection instrumentation Spectroscopy-based portal monitors used for the detection and identification of illicit 2010 IEC 0 trafficking of radioactive material - Edition 1.0 6438 62486 Railway applications Current collection systems Technical criteria for the interaction between pantograph and overhead 2010 IEC 0 line (to achieve free access) - Edition 1.0 6439 GUIDE 104 The preparation of safety publications and the use of basic safety publications and group safety publications - Edition 4.0 2010 IEC 0 6440 EC TR 61158-1 NULL 2010 IEC 0 6441 CISPR-TR 18-1 NULL 2010 IEC 0 6442 CISPRTR 18-1 NULL 2010 IEC 0 6443 CISPR-TR 18-2 NULL 2010 IEC 0 6444 CISPRTR 18-2 NULL 2010 IEC 0 6445 CISPR-TR 18-3 NULL 2010 IEC 0 6446 CISPRTR 18-3 NULL 2010 IEC 0 6447 GUIDE 116 Guidelines for safety related risk assessment and risk reduction for low voltage equipment - Edition 1.0; Includes Access to 2010 IEC 0 Additional Content 6448 GUIDE 117 Electrotechnical equipment Temperatures of touchable hot surfaces - Edition 1.0 2010 IEC 0 6449 CISPR 24 Information technology equipment Immunity characteristics Limits and methods of measurement - Edition 2.1; 2010 IEC 0 Consolidated Reprint 6450 CISPR 22 INT INFORMATION TECHNOLOGY EQUIPMENT RADIO DISTURBANCE CHARACTERISTICS LIMITS AND 2010 IEC 0 2 METHODS OF MEASUREMENT - Edition 6.0 6451 CISPR 16-1-1 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and 2010 IEC 0 immunity measuring apparatus Measuring apparatus - Edition 4.0 6452 CISPR 16-2-2 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-2: Methods of measurement of 2010 IEC 0 disturbances and immunity Measurement of disturbance power - Edition 2.0 6453 CISPR 16-2-3 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of 2010 IEC 0 disturbances and immunity Radiated disturbance measurements - Edition 4.0 6454 CISPR 16-1-1 NULL 2010 IEC 0 (REDLINE) 6455 CISPR 11 Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods of 2010 IEC 0 measurement - Edition 6.1 Consolidated Reprint 6456 80601-2-30 NULL 2010 IEC 0 CORR 1 6457 80001-1 Application of risk management for IT-networks incorporating medical devices Part 1: Roles, responsibilities and activities 2010 IEC 0 - Edition 1.0 6458 61851-1 Electric vehicle conductive charging system Part 1: General requirements - Edition 3.0 2010 IEC 0 6459 61881-1 Railway applications Rolling stock equipment Capacitors for power electronics Part 1: Paper/plastic film capacitors - 2010 IEC 0 Edition 1.0 6460 61892-5 Mobile and fixed offshore units Electrical installations Part 5: Mobile units - Edition 3.0 2010 IEC 0 6461 61892-1 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions - Edition 3.0 2010 IEC 0 6462 61935-1 CORR NULL 2010 IEC 0 1 6463 61918 Industrial communication networks Installation of communication networks in industrial premises - Edition 3.0 2010 IEC 0 6464 61936-1 Power installations exceeding 1 kV a.c. Part 1: Common rules - Edition 2.1 Consolidated Reprint 2010 IEC 0 6465 61935-2 Specification for the testing of balanced and coaxial information technology cabling Part 2: Cords as specified in ISO/IEC 2010 IEC 0 11801 and related standards - Edition 3.0 6466 61937-11 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 11: MPEG-4 AAC and its 2010 IEC 0 extensions in LATM/LOAS - Edition 1.0 6467 61937-12 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 12: Non-linear PCM 2010 IEC 0 bitstreams according to the DRA formats - Edition 1.0 6468 61850-7-2 Communication networks and systems for power utility automation Part 7-2: Basic information and communication 2010 IEC 0 structure Abstract communication service interface (ACSI) - Edition 2.0 6469 61850-7-3 Communication networks and systems for power utility automation Part 7-3: Basic communication structure Common 2010 IEC 0 data classes - Edition 2.0 6470 61850-7-4 Communication networks and systems for power utility automation Part 7-4: Basic communication structure Compatible 2010 IEC 0 logical node classes and data object classes - Edition 2.0 6471 61834-4 AMD AMENDMENT 1 Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for 2010 IEC 0 1 consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 4: Pack header table and contents - Edition 1.0 6472 61810-1 CORR NULL 2010 IEC 0 1 6473 61804-3 Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and 2010 IEC 0 semantics - Edition 3.0 6474 61788-8 Superconductivity Part 8: AC loss measurements Total AC loss measurement of round superconducting wires exposed to 2010 IEC 0 a transverse alternating magnetic field at liquid helium temperature by a pickup coil method - Edition 2.0 6475 61788-14 Superconductivity Part 14: Superconducting power devices General requirements for characteristic tests of current leads 2010 IEC 0 designed for powering superconducting devices - Edition 1.0 6476 61784-5-4 Industrial communication networks Profiles Part 5-4: Installation of fieldbuses Installation profiles for CPF 4 - Edition 2010 IEC 0 1.1; Consolidated Reprint 6477 61784-5-12 Industrial communication networks Profiles Part 5-12: Installation of fieldbuses Installation profiles for CPF 12 - Edition 2010 IEC 0 1.1 Consolidated Reprint 6478 61784-5-14 Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 - Edition 2010 IEC 0 2.0 6479 61784-5-15 Industrial communication networks Profiles Part 5-15: Installation of fieldbuses Installation profiles for CPF 15 - Edition 2010 IEC 0 1.1; Consolidated Reprint 6480 61784-5-2 Industrial communication networks Profiles Part 5-2: Installation of fieldbuses Installation profiles for CPF 2 - Edition 2010 IEC 0 3.0 6481 61784-5-3 Industrial communication networks Profiles Part 5-3: Installation of fieldbuses Installation profiles for CPF 3 - Edition 2010 IEC 0 3.0 6482 61784-5-6 Industrial communication networks Profiles Part 5-6: Installation of fieldbuses Installation profiles for CPF 6 - Edition 2010 IEC 0 3.0 6483 62006 Hydraulic machines Acceptance tests of small hydroelectric installations - Edition 1.0 2010 IEC 0 6484 61967-6 CORR Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 6: Measurement of conducted 2010 IEC 0 1 emissions Magnetic probe method CORRIGENDUM 1 - Edition 1.1 6485 61977 Fibre optic interconnecting devices and passive components Fibre optic filters Generic specification - Edition 3.0 2010 IEC 0 6486 61975 High-voltage direct current (HVDC) installations System tests - Edition 1.0 Consolidated Reprint 2010 IEC 0 6487 62106 CORR 1 NULL 2010 IEC 0 6488 62077 Fibre optic interconnecting devices and passive components Fibre optic circulators Generic specification - Edition 3.0 2010 IEC 0 6489 62026-7 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 7: CompoNet - Edition 1.0 2010 IEC 0 6490 62041 Safety of transformers, reactors, power supply units and combinations thereof EMC requirements - Edition 2.0 2010 IEC 0 6491 61753-086-6 Fibre optic interconnecting devices and passive components Performance standard Part 086-6: Non-connectorized single- 2010 IEC 0 mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O Uncontrolled environment - Edition 1.0 6492 61753-087-2 Fibre optic interconnecting devices and passive components Performance standard Part 087-2: Non-connectorized single- 2010 IEC 0 mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category C Controlled environment - Edition 1.0 6493 61753-131-3 Fibre optic interconnecting devices and passive components Performance standard Part 131-3: Single-mode mechanical 2010 IEC 0 fibre splice for category U Uncontrolled environment - Edition 1.0 6494 61753-121-2 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords 2010 IEC 0 with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment - Edition 2.0 6495 61753-121-3 Fibre optic interconnecting devices and passive components Performance standard Part 121-3: Simplex and duplex cords 2010 IEC 0 with single-mode fibre and cylindrical ferrule connectors for category U Uncontrolled environment - Edition 1.0 6496 61760-3 Surface mounting technology Part 3: Standard method for the specification of components for through hole reflow (THR) 2010 IEC 0 soldering - Edition 1.0 6497 61784-1 Industrial communication networks Profiles Part 1: Fieldbus profiles - Edition 4.0 2010 IEC 0 6498 61784-2 Industrial communication networks Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 2010 IEC 0 8802-3 - Edition 3.0 6499 61784-3 Industrial communication networks Profiles Part 3: Functional safety fieldbuses General rules and profile definitions - 2010 IEC 0 Edition 3.0 6500 61784-3-1 Industrial communication networks Profiles Part 3-1: Functional safety fieldbuses Additional specifications for CPF 1 - 2010 IEC 0 Edition 2.0 6501 61784-3-12 Industrial communication networks Profiles Part 3-12: Functional safety fieldbuses Additional specifications for CPF 12 - 2010 IEC 0 Edition 1.0 6502 61784-3-13 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 2010 IEC 0 13 - Edition 2.0 6503 61784-3-6 Industrial communication networks Profiles Part 3-6: Functional safety fieldbuses Additional specifications for CPF 6 - 2010 IEC 0 Edition 2.0 6504 61784-3-8 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 - 2010 IEC 0 Edition 2.0 6505 61784-5-10 Industrial communication networks Profiles Part 5-10: Installation of fieldbuses Installation profiles for CPF 10 - Edition 2010 IEC 0 2.1 Consolidated Reprint 6506 61784-5-11 Industrial communication networks Profiles Part 5-11: Installation of fieldbuses Installation profiles for CPF 11 - Edition 2010 IEC 0 3.0 6507 61784-3-14 Industrial communication networks Profiles Part 3-14: Functional safety fieldbuses Additional specifications for CPF 14 - 2010 IEC 0 Edition 1.0 6508 61784-3-2 Industrial communication networks Profiles Part 3-2: Functional safety fieldbuses Additional specifications for CPF 2 - 2010 IEC 0 Edition 3.0 6509 61784-3-3 Industrial communication networks Profiles Part 3-3: Functional safety fieldbuses Additional specifications for CPF 3 - 2010 IEC 0 Edition 3.0 6510 61746-2 Calibration of optical time-domain reflectometers (OTDR) Part 2: OTDR for multimode fibres - Edition 1.0 2010 IEC 0 6511 61591 AMD 2 AMENDMENT 2 Household range hoods and other cooking fume extractors Methods for measuring performance - 2010 IEC 0 Edition 1.1 6512 61666 Industrial systems, installations and equipment and industrial products Identification of terminals within a system - Edition 2010 IEC 0 2.0 6513 61558-2-8 Safety of transformers, reactors, power supply units and combinations thereof Part 2-8: Particular requirements and tests 2010 IEC 0 for transformers and power supply units for bells and chimes - Edition 2.0 6514 61558-2-9 Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests 2010 IEC 0 for transformers and power supply units for class III handlamps for tungsten filament lamps - Edition 2.0 6515 61558-2-5 Safety of transformers, reactors, power supply units and combinations thereof Part 2-5: Particular requirements and test for 2010 IEC 0 transformer for shavers, power supply units for shavers and shaver supply units - Edition 2.0 6516 61558-2-3 Safety of transformers, reactors, power supply units and combinations thereof Part 2-3: Particular requirements and tests 2010 IEC 0 for ignition transformers for gas and oil burners - Edition 2.0 6517 61558-2-20 Safety of transformers, reactors, power supply units and combinations thereof Part 2-20: Particular requirements and tests 2010 IEC 0 for small reactors - Edition 2.0 6518 61558-2-23 Safety of transformers, reactors, power supply units and combinations thereof Part 2-23: Particular requirements and tests 2010 IEC 0 for transformers and power supply units for construction sites - Edition 2.0 6519 61558-1 CORR CORRIGENDUM 2 Safety of power transformers, power supplies, reactors and similar products Part 1: General 2010 IEC 0 2 requirements and tests - Edition 2.1 6520 61549 AMD 2 AMENDMENT 2 Miscellaneous Lamps - Edition 2.1 2010 IEC 0 6521 61508 SET NULL 2010 IEC 0 (REDLINE) 6522 61508-1 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 1: General requirements - 2010 IEC 0 Edition 2.0 6523 61508-2 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 2: Requirements for 2010 IEC 0 electrical/electronic/programmable electronic safety-related systems - Edition 2.0 6524 61508-3 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 3: Software requirements - 2010 IEC 0 Edition 2.0 6525 61508-4 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 4: Definitions and 2010 IEC 0 abbreviations - Edition 2.0 6526 61508-5 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 5: Examples of methods for 2010 IEC 0 the determination of safety integrity levels - Edition 2.0 6527 61508-6 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 6: Guidelines on the 2010 IEC 0 application of IEC 61508-2 and IEC 61508-3 - Edition 2.0 6528 61508-7 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 7: Overview of techniques 2010 IEC 0 and measures - Edition 2.0 6529 61547 CORR 1 Equipment for general lighting purposes EMC immunity requirements CORRIGENDUM 1 - Edition 2.0 2010 IEC 0 6530 61526 Radiation protection instrumentation Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, 2010 IEC 0 neutron and beta radiations Direct reading personal dose equivalent meters - Edition 3.0 6531 61347-2-12 Lamp controlgear Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps 2010 IEC 0 (excluding fluorescent lamps) - Edition 1.1 Consolidated Reprint 6532 61373 Railway applications Rolling stock equipment Shock and vibration tests - Edition 2.0; Incorporates Corrigendum 10/2011 2010 IEC 0 6533 61340-4-9 Electrostatics Part 4-9: Standard test methods for specific applications Garments - Edition 2.0 2010 IEC 0 6534 61340-4-6 Electrostatics Part 4-6: Standard test methods for specific applications Wrist straps - Edition 2.0 2010 IEC 0 6535 61340-4-7 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization - Edition 2.0 2010 IEC 0 6536 61340-4-8 Electrostatics Part 4-8: Standard test methods for specific applications Electrostatic discharge shielding Bags - Edition 2.0 2010 IEC 0 6537 61340-5-3 Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements 2010 IEC 0 classification for packaging intended for electrostatic discharge sensitive devices - Edition 2.0 6538 61400-24 Wind turbines Part 24: Lightning protection - Edition 1.0 2010 IEC 0 6539 61439-5 Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks - Edition 2010 IEC 0 2.0 6540 61400-22 Wind turbines Part 22: Conformity testing and certification - Edition 1.0 2010 IEC 0 6541 61400-1(2 NULL 2010 IEC 0 6542 61400-25-6 Wind energy generation systems Part 25-6: Communications for monitoring and control of wind power plants Logical 2010 IEC 0 node classes and data classes for condition monitoring - Edition 2.0 6543 61391-2 Ultrasonics Pulse-echo scanners Part 2: Measurement of maximum depth of penetration and local dynamic range - Edition 2010 IEC 0 1.0 6544 61400-1 AMD NULL 2010 IEC 0 1 6545 61477 Live working Minimum requirements for the utilization of tools, devices and equipment - Edition 2.0 2009 IEC 0 6546 61477 CORR 1 CORRIGENDUM 1 Live working Minimum requirements for the utilization of tools, devices and equipment - Edition 2.0 2009 IEC 0 6547 61400-3 Wind turbines Part 3: Design requirements for offshore wind turbines - Edition 1.0 2009 IEC 0 6548 61360-1 Standard data elements types with associated classification scheme for electric items Part 1: Definitions Principles and 2009 IEC 0 methods - Edition 3.0 6549 61347-2-10 Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation 2009 IEC 0 of cold start tubular discharge lamps (neon tubes) - Edition 1.1 Consolidated Reprint 6550 61512-4 Batch control Part 4: Batch production records - Edition 1.0 2009 IEC 0 6551 61500 Nuclear power plants Instrumentation and control important to safety Data communication in systems performing 2009 IEC 0 category A functions - Edition 2.0 6552 61547 Equipment for general lighting purposes EMC immunity requirements - Edition 2.0 2009 IEC 0 6553 61534-22 Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation 2009 IEC 0 - Edition 2.0 6554 61482-2 Live working Protective clothing against the thermal hazards of an electric arc Part 2: Requirements - Edition 1.0 2009 IEC 0 6555 61482-1-1 Live working Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods Method 1: 2009 IEC 0 Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing - Edition 1.0 6556 61558-2-13 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-13: 2009 IEC 0 Particular requirements and tests for auto transformers and power supply units incorporating auto transformers - Edition 2.0 6557 61558-2-16 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-16: 2009 IEC 0 Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units - Edition 1.1 6558 61557-11 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2009 IEC 0 or monitoring of protective measures Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT 6559 61557-9 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2009 IEC 0 or monitoring of protective measures Part 9: Equipment for insulation fault location in IT systems - Edition 3.0 6560 61558-1 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests - 2009 IEC 0 Edition 2.1 Consolidated Reprint 6561 61558-2-4 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-4: 2009 IEC 0 Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers - Edition 2.0 6562 61558-2-6 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-6: 2009 IEC 0 Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers - 6563 61559-1 Radiation protection instrumentation in nuclear facilities Centralized systems for continuous monitoring of radiation and/or 2009 IEC 0 levels of radioactivity Part 1: General requirements - Edition 1.0 6564 61577-4 Radiation protection instrumentation Radon and radon decay product measuring instruments Part 4: Equipment for the 2009 IEC 0 production of reference atmospheres containing radon isotopes and their decay products (STAR) - Edition 1.0 6565 61606-1 Audio and audiovisual equipment Digital audio parts Basic measurement methods of audio characteristics Part 1: General 2009 IEC 0 - Edition 2.0 6566 61606-2 Audio and audiovisual equipment Digital audio parts Basic measurement methods of audio characteristics Part 2: 2009 IEC 0 Consumer use - Edition 2.0 6567 61588 Precision clock synchronization protocol for networked measurement and control systems - Edition 2.0 2009 IEC 0 6568 61753-031-3 Fibre optic interconnecting devices and passive components performance standard Part 031-3: Non-connectorized single- 2009 IEC 0 - N non-wavelengthselective branching devices (NWBD) for Category U Uncontrolled environment_أN and 2_أmode 1 Edition 2.0 6569 61747-5-3 Liquid crystal display devices Part 5-3: Environmental, endurance and mechanical test methods Glass strength and 2009 IEC 0 reliability - Edition 1.0 6570 61746-1 Calibration of optical time-domain reflectometers (OTDR) Part 1: OTDR for single mode fibres - Edition 1.0 2009 IEC 0 6571 61676 Medical electrical equipment Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in 2009 IEC 0 diagnostic radiology - Edition 1.1 Consolidated Reprint 6572 61691-6 Behavioural languages Part 6: VHDL Analog and Mixed-Signal Extensions - Edition 1.0 2009 IEC 0 6573 61691-7 Behavioural languages Part 7: SystemC Language Reference Manual - Edition 1.0 2009 IEC 0 6574 61755-3-7 Fibre optic interconnecting devices and passive components Fibre optic connector optical interfaces Part 3-7: Optical 2009 IEC 0 interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre 6575 61755-3-8 Fibre optic interconnecting devices and passive components Fibre optic connector optical interfaces Part 3-8: Optical 2009 IEC 0 interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, 6576 61772 Nuclear power plants Control rooms Application of visual display units (VDUs) - Edition 2.0 2009 IEC 0 6577 61755-3-1 CORRIGENDUM 1 Fibre optic connector optical interfaces Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter 2009 IEC 0 CORR 1 cylindrical full zirconia PC ferrule single mode fibre - Edition 1.0 6578 61755-3-2 CORRIGENDUM 1 Fibre optic connector optical interfaces Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter 2009 IEC 0 CORR 1 cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres - Edition 1.0 6579 61754-15 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 15: Type LSH connector 2009 IEC 0 family - Edition 2.0 6580 61754-24 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 24: Type SC-RJ 2009 IEC 0 connector family - Edition 1.0 6581 61754-24-11 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 24-11: Type SC-RJ 2009 IEC 0 connectors with protective housings based on IEC 61076-3-117 - Edition 1.0 6582 61754-24-21 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 24-21: Type SC-RJ 2009 IEC 0 connectors with protective housings based on IEC 61076-3-106, variant 06 - Edition 1.0 6583 61753-081-2 Fibre optic interconnecting devices and passive components Performance standard Part 081-2: Non-connectorized single- 2009 IEC 0 N DWDM devices for category C Controlled environments - Edition 2.0 _أ mode fibre optic middle-scale 1 6584 61753-111-7 Fibre optic interconnecting devices and passive components performance standard Part 111-7: Sealed closures for category 2009 IEC 0 A Aerial - Edition 1.0 6585 61753-111-8 Fibre optic interconnecting devices and passive components performance standard Part 111-8: Sealed closures for category 2009 IEC 0 G Ground - Edition 1.0 6586 61753-111-9 Fibre optic interconnecting devices and passive components performance standard Part 111-9: Sealed closures for category 2009 IEC 0 S Subterranean - Edition 1.0 6587 61753-1-3 Fibre optic interconnecting devices and passive components performance standard Part 1-3: General and guidance for 2009 IEC 0 performance standards Single-mode fibre optic connector performance for harsh industrial operating conditions - Edition 1.0 6588 61753-086-2 Fibre optic interconnecting devices and passive components performance standard Part 086-2: Non-connectorized single- 2009 IEC 0 mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category C Controlled environment - Edition 1.0 6589 62047-6 Semiconductor devices Micro-electromechanical devices Part 6: Axial fatigue testing methods of thin film materials - 2009 IEC 0 Edition 1.0 6590 62080 Sound signalling devices for household and similar purposes - Edition 1.2; Consolidated Reprint 2009 IEC 0 6591 62074-1 Fibre optic interconnecting devices and passive components Fibre optic WDM devices Part 1: Generic specification - 2009 IEC 0 Edition 2.0 6592 62106 Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 2009 IEC 0 108,0 MHz - Edition 3.0 6593 62097 Hydraulic machines, radial and axial Performance conversion method from model to prototype - Edition 1.0; Includes 2009 IEC 0 Access to Additional Content 6594 62083 Medical electrical equipment Requirements for the safety of radiotherapy treatment planning systems - Edition 2.0 2009 IEC 0 6595 61978-1 Fibre optic interconnecting devices and passive components Fibre optic passive chromatic dispersion compensators Part 1: 2009 IEC 0 Generic specification - Edition 3.0 6596 61987-10 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 10: Lists 2009 IEC 0 of properties (LOPs) for industrial-process measurement and control for electronic data exchange Fundamentals - Edition 1.0 6597 61988-2-3 Plasma display panels Part 2-3: Measuring methods Image quality: defects and degradation - Edition 1.0 2009 IEC 0 6598 61968-9 Application integration at electric utilities System interfaces for distribution management Part 9: Interfaces for meter 2009 IEC 0 reading and control - Edition 2.0 6599 61988-3-2 Plasma display panels Part 3-2: Interface Electrical interface - Edition 1.0 2009 IEC 0 6600 62003 Nuclear power plants Instrumentation and control important to safety Requirements for electromagnetic compatibility 2009 IEC 0 testing - Edition 1.0 6601 61995-2 Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCL - Edition 1.1 2009 IEC 0 Consolidated Reprint 6602 62007-2 Semiconductor optoelectronic devices for fibre optic system applications Part 2: Measuring methods - Edition 2.0 2009 IEC 0 6603 61988-5 Plasma display panels Part 5: Generic specification - Edition 1.0 2009 IEC 0 6604 61822 Electrical installations for lighting and beaconing of aerodromes Constant current regulators - Edition 2.0 2009 IEC 0 6605 61850-6 Communication networks and systems for power utility automation Part 6: Configuration description language for 2009 IEC 0 communication in electrical substations related to IEDs - Edition 2.0; Includes Access to Additional Content 6606 61935-1 Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as 2009 IEC 0 specified in ISO/IEC 11801 and related standards - Edition 4.0 6607 61907 Communication network dependability engineering - Edition 1.0 2009 IEC 0 6608 61914 Cable cleats for electrical installations - Edition 2.0 2009 IEC 0 6609 61857-21 Electrical insulation systems Procedures for thermal evaluation Part 21: Specific requirements for general-purpose models 2009 IEC 0 Wire-wound applications - Edition 3.0 6610 61850-7-420 Communication networks and systems for power utility automation Part 7-420: Basic communication structure 2009 IEC 0 Distributed energy resources logical nodes - Edition 1.0 6611 80601-2-30 Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of 2009 IEC 0 automated non-invasive sphygmomanometers - Edition 1.1 Consolidated Reprint 6612 80601-2-35 Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating 2009 IEC 0 devices using blankets, pads or mattresses and intended for heating in medical use - Edition 2.1; Consolidated Reprint 6613 80601-2-59 CORRIGENDUM 1 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential 2009 IEC 0 CORR 1 performance of screening thermographs for human febrile temperature screening - Edition 1.0 6614 81346-1 Industrial systems, installations and equipment and industrial products Structuring principles and reference designations 2009 IEC 0 Part 1: Basic rules - Edition 1.0 6615 81346-2 Industrial systems, installations and equipment and industrial products Structuring principles and reference designations 2009 IEC 0 Part 2: Classification of objects and codes for classes - Edition 1.0 6616 CISPR 12 Vehicles, boats and internal combustion engines Radio disturbance characteristics Limits and methods of measurement for 2009 IEC 0 the protection of off-board receivers - Edition 6.1; Consolidated Reprint 6617 CISPR 13 Sound and television broadcast receivers and associated equipment Radio disturbance characteristics Limits and methods 2009 IEC 0 of measurement - Edition 5.1; Consolidated Reprint 6618 CISPR 16-1-2 NULL 2009 IEC 0 CORR 1 6619 CISPR 22 INT Information technology equipment Radio disturbance characteristics Limits and methods of measurement - Edition 6.0 2009 IEC 0 1 6620 CISPR 25 NULL 2009 IEC 0 CORR 1 6621 CISPR-TR 16- NULL 2009 IEC 0 4-1 6622 CISPRTR 16-4- NULL 2009 IEC 0 1 6623 GUIDE 107 Electromagnetic compatibility Guide to the drafting of electromagnetic compatibility publications - Edition 4.0 2009 IEC 0 6624 62496-3-1 Optical circuit boards Part 3-1: Performance standards Flexible optical circuit boards using unconnectorized optical glass 2009 IEC 0 fibres - Edition 1.0 6625 62493 Assessment of lighting equipment related to human exposure to electromagnetic field - Edition 2.0 2009 IEC 0 6626 62505-1 Railway applications Fixed installations Particular requirements for AC switchgear Part 1: Circuit-breakers with nominal 2009 IEC 0 voltage above 1 kV - Edition 2.0 6627 62505-3-1 Railway applications Fixed installations Particular requirements for a.c. switchgear Part 3-1: Measurement, control and 2009 IEC 0 protection devices for specific use in a.c. traction systems Application guide - Edition 1.0 6628 62505-3-2 Railway applications Fixed installations Particular requirements for a.c. switchgear Part 3-2: Measurement, control and 2009 IEC 0 protection devices for specific use in a.c. traction systems Single-phase current transformers - Edition 1.0 6629 62505-3-3 Railway applications Fixed installations Particular requirements for a.c. switchgear Part 3-3: Measurement, control and 2009 IEC 0 protection devices for specific use in a.c. traction systems Single-phase inductive voltage transformers - Edition 1.0 6630 62501 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission Electrical testing - 2009 IEC 0 Edition 1.1; Consolidated Reprint 6631 62505-2 Railway applications Fixed installations Particular requirements for AC switchgear Part 2: Disconnectors, earthing 2009 IEC 0 switches and switches with nominal voltage above 1 kV - Edition 2.0 6632 62516-1 Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 1: Basic requirement - Edition 1.0 2009 IEC 0 6633 62524 Multimedia systems and equipment Multimedia e-publishing and e-books Readerâ__s format for e-publishing - Edition 2009 IEC 0 1.0 6634 62546 High Definition (HD) recording link guidelines - Edition 1.0 2009 IEC 0 6635 62563-1 Medical electrical equipment Medical image display systems Part 1: Evaluation methods - Edition 1.1 2009 IEC 0 6636 62576 Electric double-layer capacitors for use in hybrid electric vehicles Test methods for electrical characteristics - Edition 1.0 2009 IEC 0 6637 62577 Evaluation of human exposure to electromagnetic fields from a stand-alone broadcast transmitter (30 MHz 40 GHz) - 2009 IEC 0 Edition 1.0 6638 62624 Test methods for measurement of electrical properties of carbon nanotubes - Edition 1.0 2009 IEC 0 6639 62467-1 Medical electrical equipment Dosimetric instruments as used in brachytherapy Part 1: Instruments based on well-type 2009 IEC 0 ionization chambers - Edition 1.0 6640 62453-2 Field device tool (FDT) interface specification Part 2: Concepts and detailed description - Edition 2.0 2009 IEC 0 6641 62453-301 Field device tool (FDT) interface specification Part 301: Communication profile integration IEC 61784 CPF 1 - Edition 2009 IEC 0 1.1; Consolidated Reprint 6642 62453-302 Field device tool (FDT) interface specification Part 302: Communication profile integration IEC 61784 CPF 2 - Edition 2009 IEC 0 2.0 6643 62453-303-1 Field device tool (FDT) interface specification Part 303-1: Communication profile integration IEC 61784 CP 3/1 and CP 2009 IEC 0 3/2 - Edition 1.1; Consolidated Reprint 6644 62453-303-2 FIeld device tool (FDT) interface specification Part 303-2: Communication profile integration IEC 61784 CP 3/4, CP 3/5 2009 IEC 0 and CP 3/6 - Edition 1.1; Consolidated Reprint 6645 62453-306 Field device tool (FDT) interface specification Part 306: Communication profile integration IEC 61784 CPF 6 - Edition 2009 IEC 0 1.0 6646 62453-309 Field device tool (FDT) interface specification Part 309: Communication profile integration IEC 61784 CPF 9 - Edition 2009 IEC 0 2.0 6647 62453-315 Field device tool (FDT) interface specification Part 315: Communication profile integration IEC 61784 CPF 15 - Edition 2009 IEC 0 1.1 6648 62448 Multimedia systems and equipment Multimedia e-publishing and e-books Generic format for E-publishing - Edition 3.0 2009 IEC 0 6649 62446 NULL 2009 IEC 0 6650 62453-1 Field device tool (FDT) interface specification Part 1: Overview and guidance - Edition 2.0 2009 IEC 0 6651 62386-101 Digital addressable lighting interface - Part 101: General requirements - System components - Edition 2.0 2009 IEC 0 6652 62386-102 Digital addressable lighting interface - Part 102: General requirements - Control gear - Edition 2.0 2009 IEC 0 6653 62386-201 Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 2009 IEC 0 0) - Edition 2.0 6654 62386-202 Digital addressable lighting interface Part 202: Particular requirements for control gear Self-contained emergency lighting 2009 IEC 0 (device type 1) - Edition 1.0 6655 62386-203 Digital addressable lighting interface Part 203: Particular requirements for control gear Discharge lamps (excluding 2009 IEC 0 fluorescent lamps) (device type 2) - Edition 1.0 6656 62386-204 Digital addressable lighting interface Part 204: Particular requirements for control gear Low voltage halogen lamps 2009 IEC 0 (device type 3) - Edition 1.0 6657 62386-205 Digital addressable lighting interface Part 205: Particular requirements for control gear Supply voltage controller for 2009 IEC 0 incandescent lamps (device type 4) - Edition 1.0 6658 62386-206 Digital addressable lighting interface Part 206: Particular requirements for control gear Conversion from digital signal into 2009 IEC 0 d. c. voltage (device type 5) - Edition 1.0 6659 62386-207 Digital addressable lighting interface Part 207: Particular requirements for control gear LED modules (device type 6) - 2009 IEC 0 Edition 1.0 6660 62386-208 Digital addressable lighting interface Part 208: Particular requirements for control gear Switching function (device type 7) 2009 IEC 0 - Edition 1.0 6661 62423 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household 2009 IEC 0 and similar uses - Edition 2.0 6662 62430 Environmentally conscious design for electrical and electronic products - Edition 1.0 2009 IEC 0 6663 62313 Railway applications Power supply and rolling stock Technical criteria for the coordination between power supply 2009 IEC 0 (substation) and rolling stock - Edition 1.0 6664 62320-1 Maritime navigation and radiocommunication equipment and systems Automatic identification system (AIS) Part 1: AIS 2009 IEC 0 Base Stations Minimum operational and performance requirements, methods of testing and required test results - Edition 2.0 6665 62319-1 CORR Polymeric thermistors Directly heated positive step function temperature coefficient Part 1: Generic specification 2009 IEC 0 1 CORRIGENDUM 1 - Edition 1.0 6666 62341-1-1 Organic light emitting diode (OLED) displays Part 1-1: Generic specifications - Edition 1.0 2009 IEC 0 6667 62341-5 Organic light emitting diode (OLED) displays Part 5: Environmental testing methods - Edition 1.0 2009 IEC 0 6668 62341-6-1 Organic light emitting diode (OLED) displays Part 6-1: Measuring methods of optical and electro-optical parameters - 2009 IEC 0 Edition 2.0 6669 62365 Digital audio Digital input-output interfacing Transmission of digital audio over asynchronous transfer mode (ATM) 2009 IEC 0 networks - Edition 2.0 6670 62343-5-1 Dynamic modules Part 5-1 Test methods Dynamic gain tilt equalizer Gain tilt settling time measurement - Edition 2.0 2009 IEC 0 6671 62258-1 Semiconductor die products Part 1: Procurement and use - Edition 2.0 2009 IEC 0 6672 62267 Railway applications Automated urban guided transport (AUGT) Safety requirements - Edition 1.0 2009 IEC 0 6673 62271-104 High-voltage switchgear and controlgear Part 104: Alternating current switches for rated voltages higher than 52 kV - 2009 IEC 0 Edition 2.0 6674 62192 Live working Insulating ropes - Edition 1.0 2009 IEC 0 6675 62223 Insulators Glossary of terms and definitions - Edition 1.0 2009 IEC 0 6676 62216 Digital terrestrial television receivers for the DVB-T system - Edition 1.0 2009 IEC 0 6677 62153-4-10 Metallic communication cable test methods Part 4-10: Electromagnetic compatibility (EMC) Transfer impedance and 2009 IEC 0 screening attenuation of feed-throughs and electromagnetic gaskets Double coaxial test method - Edition 2.0 6678 62153-4-11 Metallic communication cable test methods Part 4-11: Electromagnetic compatibility (EMC) Coupling attenuation or 2009 IEC 0 screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables Absorbing clamp method - Edition 1.0 6679 62153-4-12 Metallic communication cable test methods Part 4-12: Electromagnetic compatibility (EMC) Coupling attenuation or 2009 IEC 0 screening attenuation of connecting hardware Absorbing clamp method - Edition 1.0 6680 62153-4-13 Metallic communication cable test methods Part 4-13: Electromagnetic compatibility (EMC) Coupling attenuation of links 2009 IEC 0 and channels (laboratory conditions) Absorbing clamp method - Edition 1.0 6681 62149-5 Fibre optic active components and devices Performance standards Part 5: ATM-PON transceivers with LD driver and 2009 IEC 0 CDR ICs - Edition 2.0 6682 62150-4 Fibre optic active components and devices Test and measurement procedures Part 4: Relative intensity noise using a time- 2009 IEC 0 domain optical detection system - Edition 1.0 6683 62149-2 Fibre optic active components and devices Performance standards Part 2: 850 nm discrete vertical cavity surface emitting 2009 IEC 0 laser devices - Edition 2.0 6684 62134-1 Fibre optic interconnecting devices and passive components Fibre optic closures Part 1: Generic specification - Edition 2.0 2009 IEC 0 6685 62137-1-4 Surface mounting technology Environmental and endurance test methods for surface mount solder joint Part 1-4: Cyclic 2009 IEC 0 bending test - Edition 1.0 6686 62137-1-5 Surface mounting technology Environmental and endurance test methods for surface mount solder joints Part 1-5: 2009 IEC 0 Mechanical shear fatigue test - Edition 1.0 6687 62148-15 Fibre optic active components and devices Package and interface standards Part 15: Discrete vertical cavity surface 2009 IEC 0 emitting laser packages - Edition 2.0 6688 62148-16 Fiber optic active components and devices Package and interface standards Part 16: Transmitter and receiver components 2009 IEC 0 for use with the LC connector interface - Edition 1.0 6689 62148-11 Fibre optic active components and devices Package and interface standards Part 11: 14-pin active device modules - 2009 IEC 0 Edition 2.0 6690 62110 Electric and magnetic field levels generated by AC power systems Measurement procedures with regard to public exposure 2009 IEC 0 - Edition 1.0 6691 IECQ 001002-4 NULL 2009 IEC 0 AMD 1 6692 IECEX TR NULL 2009 IEC 0 60079-31 6693 PAS 61753-1-3 NULL 2009 IEC 0 6694 PAS 62596 NULL 2009 IEC 0 6695 PAS 62611 Vacuum cleaners for commercial use Methods for measuring performance - Edition 1.0 2009 IEC 0 6696 PAS 62612 NULL 2009 IEC 0 6697 PAS 62633 NULL 2009 IEC 0 6698 PAS 62569-1 Generic specification of information on products Part 1: Principles and methods - Edition 1.0 2009 IEC 0 6699 TR 60919-3 Performance of high-voltage direct current (HVDC) systems with line-commutated converters Part 3: Dynamic conditions 2009 IEC 0 - Edition 2.1 6700 TR 60943 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals - Edition 2009 IEC 0 2.1 Consolidated Reprint 6701 TR 61000-4-35 Electromagnetic compatibility (EMC) Part 4-35: Testing and measurement techniques HPEM simulator compendium - 2009 IEC 0 Edition 1.0 6702 TR 61156-1-2 Multicore and symmetrical pair/quad cables for digital communications Part 1-2: Electrical transmission characteristics 2009 IEC 0 and test methods of symmetrical pair/quad cables - Edition 1.1 Consolidated Reprint 6703 TR 60092-370 Electrical installations in ships Part 370: Guidance on the selection of cables for telecommunication and data transfer 2009 IEC 0 including radio-frequency cables - Edition 1.0 6704 TR 60083 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC - Edition 7.0 2009 IEC 0 6705 TR 61292-1 Optical amplifiers Part 1: Parameters of amplifier components - Edition 2.0 2009 IEC 0 6706 TR 61340-5-2 CORRIGENDUM 1 Part 5-2: Protection of electronic devices from electrostatic phenomena User guide - Edition 1.0 2009 IEC 0 CORR 1 6707 TR 62002-4 Mobile and portable DVB-T/H radio access Part 4: Measurement methods for total radiated sensitivity in hand-held 2009 IEC 0 broadcast terminals - Edition 1.0 6708 TR 62001 NULL 2009 IEC 0 6709 TR 61912-2 Low-voltage switchgear and controlgear Over-current protective devices Part 2: Selectivity under over-current conditions 2009 IEC 0 - Edition 1.0 6710 TR 61916 Electrical accessories Harmonization of general rules - Edition 4.0 2009 IEC 0 6711 TR 61838 Nuclear power plants Instrumentation and control important to safety Use of probabilistic safety assessment for the 2009 IEC 0 classification of functions - Edition 2.0 6712 TR 62602 Conductors of insulated cables Data for AWG and KCMIL sizes - Edition 1.0 2009 IEC 0 6713 TR 62517 Magnetizing behaviour of permanent magnets - Edition 1.0 2009 IEC 0 6714 TR 62518 Rare earth sintered magnets Stability of the magnetic properties at elevated temperatures - Edition 1.0 2009 IEC 0 6715 TR 62540 Radio frequency identification (RFID) of stationary lead acid cells and monoblocs Tentative requirements - Edition 1.0 2009 IEC 0 6716 TR 62471-2 Photobiological safety of lamps and lamp systems Part 2: Guidance on manufacturing requirements relating to non-laser 2009 IEC 0 optical radiation safety - Edition 1.0 6717 TR 62443-3-1 Industrial communication networks Network and system security Part 3-1: Security technologies for industrial automation 2009 IEC 0 and control systems - Edition 1.0 6718 TR 62453-41 Field device tool (FDT) interface specification Part 41: Object model integration profile Common object model - Edition 2009 IEC 0 2.0 6719 TR 62453-501 Field device tool (FDT) interface specification Part 501: Communication implementation for common object model IEC 2009 IEC 0 61784 CPF 1 - Edition 1.0 6720 TR 62453-502 Field device tool (FDT) interface specification Part 502: Communication implementation for common object model IEC 2009 IEC 0 61784 CPF 2 - Edition 1.0 6721 TR 62453-503- Field device tool (FDT) interface specification Part 503-1: Communication implementation for common object model IEC 2009 IEC 0 1 61784 CP 3/1 and CP 3/2 - Edition 1.0 6722 TR 62453-503- Field device tool (FDT) interface specification Part 503-2: Communication implementation for common object model IEC 2009 IEC 0 2 61784 CP 3/4, CP 3/5 and CP 3/6 - Edition 1.0 6723 TR 62453-506 Field device tool (FDT) interface specification Part 506: Communication implementation for common object model IEC 2009 IEC 0 61784 CPF 6 - Edition 1.0 6724 TR 62453-509 Field device tool (FDT) interface specification Part 509: Communication implementation for common object model IEC 2009 IEC 0 61784 CPF 9 - Edition 1.0 6725 TR 62453-515 Field device tool (FDT) interface specification Part 515: Communication implementation for common object model IEC 2009 IEC 0 61784 CPF 15 - Edition 1.0 6726 TR 62453-61 Field device tool (FDT) interface specification Part 61: Device Type Manager (DTM) Styleguide for common object 2009 IEC 0 model - Edition 1.0 6727 TR 62271-301 High-voltage switchgear and controlgear Part 301: Dimensional standardisation of high-voltage terminals - Edition 2.0 2009 IEC 0 6728 TR 62291 Multimedia data storage Application program interface for UDF based file systems - Edition 2.0 2009 IEC 0 6729 TR 62296 Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements - 2009 IEC 0 Edition 2.0 6730 TR 62271-208 High-voltage switchgear and controlgear Part 208: Methods to quantify the steady state, power-frequency electromagnetic 2009 IEC 0 fields generated by HV switchgear assemblies and HV/LV prefabricated substations - Edition 1.0 6731 TR 62354 General testing procedures for medical electrical equipment - Edition 3.0 2009 IEC 0 6732 TR 62343-6-2 Dynamic modules Part 6-2: Design guide Software and hardware interfaces Survey results - Edition 2.0 2009 IEC 0 6733 TR 62271-305 High-voltage switchgear and controlgear Part 305: Capacitive current switching capability of air-insulated disconnectors 2009 IEC 0 for rated voltages above 52 kV - Edition 1.0 6734 TR 62152 Transmission properties of cascaded two-ports or quadripols - Background of terms and definitions - Edition 2.0 2009 IEC 0 6735 TR 62096 Nuclear power plants Instrumentation and control important to safety Guidance for the decision on modernization - 2009 IEC 0 Edition 2.0 6736 TS 61000-5-8 Electromagnetic compatibility (EMC) Part 5-8: Installation and mitigation guidelines HEMP protection methods for the 2009 IEC 0 distributed infrastructure - Edition 1.0 6737 TS 61000-5-9 Electromagnetic compatibility (EMC) Part 5-9: Installation and mitigation guidelines System-level susceptibility 2009 IEC 0 assessments for HEMP and HPEM - Edition 1.0 6738 TS 61000-3-5 Electromagnetic compatibility (EMC) Part 3-5: Limits Limitation of voltage fluctuations and flicker in low-voltage power 2009 IEC 0 supply systems for equipment with rated current greater than 75 A - Edition 2.0 6739 TS 61000-3-5 Electromagnetic compatibility (EMC) Part 3-5: Limits Limitation of voltage fluctuations and flicker in low-voltage power 2009 IEC 0 CORR 1 supply systems for equipment with rated current greater than 75 A - Edition 2.0 6740 TR 80002-1 Medical device software Part 1: Guidance on the application of ISO 14971 to medical device software - Edition 1.0 2009 IEC 0 6741 TS 60034-24 Rotating electrical machines Part 24: Online detection and diagnosis of potential failures at the active parts of rotating 2009 IEC 0 electrical machines and of bearing currents Application guide - Edition 1.0 6742 TS 60076-14 NULL 2009 IEC 0 6743 TR 62636 Multimedia home server systems Implementation of digital rights permission code - Edition 1.0 2009 IEC 0 6744 TS 62443-1-1 Industrial communication networks Network and system security Part 1-1: Terminology, concepts and models - Edition 2009 IEC 0 1.0 6745 TS 62578 Power electronics systems and equipment Operation conditions and characteristics of active infeed converter (AIC) 2009 IEC 0 applications including design recommendations for their emission values below 150 kHz - Edition 2.0 6746 TS 62610-1 Mechanical structures for electronic equipment Thermal management for cabinets in accordance with IEC 60297 and IEC 2009 IEC 0 60917 series Part 1: Design guide: Interface dimension and provision for thermoelectrical cooling systems (Peltier effect) - Edition 1.0 6747 TS 62610-3 Mechanical structures for electronic equipment Thermal management for cabinets in accordance with IEC 60297 and IEC 2009 IEC 0 60917 series Part 3: Design guide: Evaluation method for thermoelectrical cooling systems (Peltier effect) - Edition 1.0 6748 60529 CORR 3 NULL 2009 IEC 0 6749 60534-2-4 Industrial-process control valves Part 2-4: Flow capacity Inherent flow characteristics and rangeability - Edition 2.0 2009 IEC 0 6750 60598-2-14 Luminaires Part 2-14: Particular requirements Luminaires for cold cathode tubular discharge lamps (neon tubes) and 2009 IEC 0 similar equipment - Edition 1.0 6751 60601-2-41 Medical electrical equipment Part 2-41: Particular requirements for the basic safety and essential performance of surgical 2009 IEC 0 luminaires and luminaires for diagnosis - Edition 2.1 Consolidated Reprint 6752 60601-2-5 Medical electrical equipment Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic 2009 IEC 0 physiotherapy equipment - Edition 3.0 6753 60601-2-50 Medical electrical equipment Part 2-50: Particular requirements for the basic safety and essential performance of infant 2009 IEC 0 phototherapy equipment - Edition 2.1 6754 60601-2-13 NULL 2009 IEC 0 6755 60601-2-1 Medical electrical equipment Part 2-1: Particular requirements for the basic safety and essential performance of electron 2009 IEC 0 accelerators in the range 1 MeV to 50 MeV - Edition 3.1 Consolidated Reprint 6756 60601-2-18 Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of 2009 IEC 0 endoscopic equipment - Edition 3.0 6757 60601-2-19 Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant 2009 IEC 0 incubators - Edition 2.1; Consolidated Reprint 6758 60601-2-20 Medical electrical equipment Part 2-20: Particular requirements for the basic safety and essential performance of infant 2009 IEC 0 transport incubators - Edition 2.1 Consolidated Reprint 6759 60601-2-2 Medical electrical equipment Part 2-2: Particular requirements for the basic safety and essential performance of high 2009 IEC 0 frequency surgical equipment and high frequency surgical accessories - Edition 6.0 6760 60601-2-21 Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant 2009 IEC 0 radiant warmers - Edition 2.1; Consolidated Reprint 6761 60633 Terminology for high-voltage direct current (HVDC) transmission - Edition 2.2 Consolidated Reprint 2009 IEC 0 6762 60630 AMD 6 AMENDMENT 6 Maximum lamp outlines for incandescent lamps - Edition 2.0 2009 IEC 0 6763 60626-1 Combined flexible materials for electrical insulation Part 1: Definitions and general requirements - Edition 3.0 2009 IEC 0 6764 60626-2 Combined flexible materials for electrical insulation Part 2: Methods of test - Edition 3.0 2009 IEC 0 6765 60601-2-54 Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray 2009 IEC 0 equipment for radiography and radioscopy - Edition 1.1; Consolidated Reprint 6766 60601-2-52 Medical electrical equipment Part 2-52: Particular requirements for the basic safety and essential performance of medical 2009 IEC 0 beds - Edition 1.1 Consolidated Reprint 6767 60502-1 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 2009 IEC 0 36 kV) Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) - Edition 2.1 Consolidated Reprint 6768 60384-13-1 CORRIGENDUM 1 Fixed capacitors for use in electronic equipment Part 13-1: Blank detail specification Fixed 2009 IEC 0 CORR 1 polypropylene film dielectric metal foil d.c. capacitors Assessment level E - Edition 2.0 6769 60364-7-717 Low-voltage electrical installations Part 7-717: Requirements for special installations or locations Mobile or transportable 2009 IEC 0 units - Edition 2.0 6770 60364-1 CORR Low-voltage electrical installations Part 1: Fundamental principles, assessment of general characteristics, definitions - 2009 IEC 0 1 Edition 5.0 6771 60364-5-52 Low-voltage electrical installations Part 5-52: Selection and erection of electrical equipment Wiring systems - Edition 3.0 2009 IEC 0 6772 60364-5-56 Low-voltage electrical installations Part 5-56: Selection and erection of electrical equipment Safety services - Edition 2.0 2009 IEC 0 6773 60401-2 Terms and nomenclature for cores made of magnetically soft ferrites Part 2: Reference of dimensions - Edition 2.0 2009 IEC 0 6774 60404-6 CORR CORRIGENDUM 1 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft 2009 IEC 0 1 metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens - Edition 2.0 6775 60404-8-10 Magnetic materials Part 8-10: Specifications for individual materials Magnetic materials (iron and steel) for use in relays - 2009 IEC 0 Edition 2.0 6776 60424-5 Ferrite cores Guide on the limits of surface irregularities Part 5: Planar-cores - Edition 1.0 2009 IEC 0 6777 60335-2-61 Household and similar electrical appliances Safety Part 2-61: Particular requirements for thermal storage room heaters - 2009 IEC 0 Edition 2.2 Consolidated Reprint 6778 60335-2-6 NULL 2009 IEC 0 AMD 2 CORR 1 6779 60335-2-59 Household and similar electrical appliances Safety Part 2-59: Particular requirements for insect killers - Edition 3.2 2009 IEC 0 Consolidated Reprint 6780 60335-2-73 Household and similar electrical appliances Safety Part 2-73: Particular requirements for fixed immersion heaters - 2009 IEC 0 Edition 2.2 Consolidated Reprint 6781 60335-2-74 Household and similar electrical appliances Safety Part 2-74: Particular requirements for portable immersion heaters - 2009 IEC 0 Edition 2.2 Consolidated Reprint 6782 60335-2-96 Household and similar electrical appliances Safety Part 2-96: Particular requirements for flexible sheet heating elements 2009 IEC 0 for room heating - Edition 1.2 Consolidated Reprint 6783 60335-2-97 Household and similar electrical appliances Safety Part 2-97: Particular requirements for drives for shutters, awnings, 2009 IEC 0 blinds and similar equipment - Edition 3.0 6784 60335-2-30 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters - Edition 2009 IEC 0 5.1;Consolidated Reprint 6785 60335-2-13 Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and 2009 IEC 0 similar appliances - Consolidated Version; Edition 6.1 6786 60335-2-42 Household and similar electrical appliances Safety Part 2-42: Particular requirements for commercial electric forced 2009 IEC 0 convection ovens, steam cookers and steam-convection ovens - Edition 5.2; Consolidated Reprint 6787 60332-3-10 Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically- 2009 IEC 0 mounted bunched wires or cables Apparatus - Edition 1.1 Consolidated Reprint 6788 60332-3-22 Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically- 2009 IEC 0 mounted bunched wires or cables Category A - Edition 1.1 Consolidated Reprint 6789 60332-3-23 Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically- 2009 IEC 0 mounted bunched wires or cables Category B - Edition 1.1 Consolidated Reprint 6790 60332-3-24 Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically- 2009 IEC 0 mounted bunched wires or cables Category C - Edition 1.1 Consolidated Reprint 6791 60332-3-25 Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically- 2009 IEC 0 mounted bunched wires or cables Category D - Edition 1.1 Consolidated Reprint 6792 60320-2-4 Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for 2009 IEC 0 engagement - Edition 1.1 Consolidated Reprint 6793 60318-1 Electroacoustics Simulators of human head and ear Part 1: Ear simulator for the measurement of supra-aural and 2009 IEC 0 circumaural earphones - Edition 2.0 6794 60331-3 Tests for electric cables under fire conditions Circuit integrity Part 3: Test method for fire with shock at a temperature of 2009 IEC 0 at least 830 Degrees C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure - Edition 1.0 6795 60331-1 Tests for electric cables under fire conditions Circuit integrity Part 1: Test method for fire with shock at a temperature of 2009 IEC 0 at least 830 degrees C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm 6796 60331-11 Tests for electric cables under fire conditions Circuit integrity Part 11: Apparatus Fire alone at a flame temperature of at 2009 IEC 0 least 750 degree C - Edition 1.1 Consolidated Reprint 6797 60331-2 Tests for electric cables under fire conditions Circuit integrity Part 2: Test method for fire with shock at a temperature of 2009 IEC 0 at least 830 Degrees C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 6798 60050-617 International Electrotechnical Vocabulary Part 617: Organization/Market of electricity - Edition 1.0 2009 IEC 0 6799 60061-1 AMD Amendment 41 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2009 IEC 0 41 caps - Edition 3.35 6800 60061-1 AMD Amendment 42 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2009 IEC 0 42 caps - Edition 3.35 6801 60061-2 AMD Amendment 38 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2009 IEC 0 38 Lampholders - Edition 3.32 6802 60061-2 AMD Amendment 39 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2009 IEC 0 39 Lampholders - Edition 3.32 6803 60059 IEC standard current ratings - Edition 2.1 Consolidated Reprint 2009 IEC 0 6804 60034-22 Rotating electrical machines Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating 2009 IEC 0 sets - Edition 2.0 6805 60038 IEC standard voltages - Edition 7.0 2009 IEC 0 6806 60050-103 International Electrotechnical Vocabulary Part 103: Mathematics Functions - Edition 1.0 2009 IEC 0 6807 60034-15 Rotating electrical machines Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. 2009 IEC 0 machines - Edition 3.0 6808 60092-306 Electrical installations in ships Part 306: Equipment Luminaires and lighting accessories - Edition 4.0 2009 IEC 0 6809 60079-31 NULL 2009 IEC 0 CORR 1 6810 60079-29-4 Explosive atmospheres Part 29-4: Gas detectors Performance requirements of open path detectors for flammable gases - 2009 IEC 0 Edition 1.0 6811 60079-26 NULL 2009 IEC 0 CORR 1 6812 60079-29-1 INT NULL 2009 IEC 0 1 6813 60079-10-2 Explosive atmospheres Part 10-2: Classification of areas Explosive dust atmospheres - Edition 2.0 2009 IEC 0 6814 60079-18 Explosive atmospheres - Part 18: Equipment protection by encapsulation â__mâ__ - Edition 4.0 2009 IEC 0 6815 60079-18 NULL 2009 IEC 0 (REDLINE) 6816 60079-18 NULL 2009 IEC 0 CORR 1 6817 60064 AMD 5 AMENDMENT 5 Tungsten filament lamps for domestic and similar general lighting purposes Performance requirements - 2009 IEC 0 Edition 6.0 6818 60068-2-38 Environmental testing Part 2-38: Tests Test Z/AD: Composite temperature/humidity cyclic test - Edition 2.0 2009 IEC 0 6819 60068-2-14 Environmental testing Part 2-14: Tests Test N: Change of temperature - Edition 6.0 2009 IEC 0 6820 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials - Edition 4.1 2009 IEC 0 Consolidated Reprint 6821 60115-8 Fixed resistors for use in electronic equipment Part 8: Sectional specification Fixed surface mount resistors - Edition 2.0 2009 IEC 0 6822 60099-4 Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systems - Edition 3.0 2009 IEC 0 6823 60095-2 Lead-acid starter batteries Part 2: Dimensions of batteries and dimensions and marking of terminals - Edition 4.0 2009 IEC 0 6824 60191-6 Mechanical standardization of semiconductor devices Part 6: General rules for the preparation of outline drawings of 2009 IEC 0 surface mounted semiconductor device packages - Edition 3.0 6825 60146-1-1 Semiconductor converters General requirements and line commutated converters Part 1-1: Specification of basic 2009 IEC 0 requirements - Edition 4.0 6826 60286-5 Packaging of components for automatic handling Part 5: Matrix trays - Edition 2.1 Consolidated Reprint 2009 IEC 0 6827 60282-1 AMENDMENT 1 High-voltage fuses Part 1: Current-limiting fuses - Edition 7.1 Consolidated Reprint 2009 IEC 0 6828 60269-4 Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices - Edition 2009 IEC 0 5.2; Consolidated Reprint 6829 60269-1 Low-voltage fuses Part 1: General requirements - Edition 4.2 Consolidated Reprint 2009 IEC 0 6830 60264-3-1 Packaging of winding wires Part 3-1: Taper barrelled delivery spools Basic dimensions - Edition 2.1 Consolidated Reprint 2009 IEC 0 6831 60264-5-1 Packaging of winding wires Part 5-1: Cylindrical barrelled delivery spools with conical flanges Basic dimensions - 2009 IEC 0 Edition 1.1; Consolidated Reprint 6832 60264-4-1 Packaging of winding wires Part 4-1: Methods of test Delivery spools made from thermoplastic materials - Edition 2.1; 2009 IEC 0 Consolidated Reprint 6833 60311 Electric irons for household or similar use Methods for measuring performance - Edition 5.0 2009 IEC 0 6834 60300-3-15 Dependability management Part 3-15: Application guide Engineering of system dependability - Edition 1.0 2009 IEC 0 6835 60300-3-11 Dependability management Part 3-11: Application guide Reliability centred maintenance - Edition 2.0 2009 IEC 0 6836 60204-33 Safety of machinery Electrical equipment of machines Part 33: Requirements for semiconductor fabrication equipment - 2009 IEC 0 Edition 1.0 6837 60205 Calculation of the effective parameters of magnetic piece parts - Edition 4.0 2009 IEC 0 6838 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements - Edition 6.0 2009 IEC 0 6839 60196 IEC standard frequencies - Edition 2.0 2009 IEC 0 6840 60255-1 Measuring relays and protection equipment Part 1: Common requirements - Edition 1.0 2009 IEC 0 6841 60264-1 AMD AMENDMENT 1 Packaging of winding wires Part 1:Containers for round winding wires - Edition 1.0 2009 IEC 0 1 6842 60255-151 Measuring relays and protection equipement Part 151: Functional requirements for over/under current protection - Edition 2009 IEC 0 1.0 6843 60794-3-10 Optical fibre cables Part 3-10: Outdoor cables Family specification for duct, directly buried or lashed aerial optical 2009 IEC 0 telecommunication cables - Edition 3.0 6844 60794-3-20 Optical fibre cables Part 3-20: Outdoor cables Family specification for self-supporting aerial telecommunication cables - 2009 IEC 0 Edition 3.0 6845 60800 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation - Edition 3.0 2009 IEC 0 6846 60800 CORR 1 CORRIGENDUM 1 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation - 2009 IEC 0 Edition 3.0 6847 60809 AMD 4 NULL 2009 IEC 0 6848 60825-1 INT 1 NULL 2009 IEC 0 6849 60819-1 Non-cellulosic papers for electrical purposes Part 1: Definitions and general requirements - Edition 3.0 2009 IEC 0 6850 60855-1 Live working Insulating foam-filled tubes and solid rods Part 1: Tubes and rods of a circular cross-section - Edition 2.0 2009 IEC 0 6851 60851-3 Winding wires Test methods Part 3: Mechanical properties - Edition 3.1 Consolidated Reprint 2009 IEC 0 6852 60851-1 AMD AMENDMENT 2 Winding wires â__ Test methods â__ Part 1: General - Edition 2.0 2009 IEC 0 2 6853 60851-2 Winding wires Test methods Part 2: Determination of dimensions - Edition 3.1; Consolidated Reprint 2009 IEC 0 6854 60846-1 Radiation protection instrumentation Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X 2009 IEC 0 and gamma radiation Part 1: Portable workplace and environmental meters and monitors - Edition 1.0 6855 60964 Nuclear power plants Control rooms Design - Edition 2.0 2009 IEC 0 6856 60965 Nuclear power plants Control rooms Supplementary control room for reactor shutdown without access to the main control 2009 IEC 0 room - Edition 3.0 6857 60966-2-3 Radio frequency and coaxial cable assemblies Part 2-3: Detail specification for flexible coaxial cable assemblies 2009 IEC 0 Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors - Edition 3.0 6858 60966-2-4 Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV 2009 IEC 0 receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors - Edition 4.0 6859 60958-3 Digital audio interface Part 3: Consumer applications - Edition 3.2 Consolidated Reprint 2009 IEC 0 6860 60951-1 Nuclear power plants Instrumentation important to safety Radiation monitoring for accident and post-accident conditions 2009 IEC 0 Part 1: General requirements - Edition 2.0 6861 60951-2 Nuclear power plants Instrumentation important to safety Radiation monitoring for accident and post-accident conditions 2009 IEC 0 Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air - Edition 2.0 6862 60951-3 Nuclear power plants Instrumentation important to safety Radiation monitoring for accident and post-accident conditions 2009 IEC 0 Part 3: Equipment for continuous high range area gamma monitoring - Edition 2.0 6863 60951-4 Nuclear power plants Instrumentation important to safety Radiation monitoring for accident and post-accident conditions 2009 IEC 0 Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams - Edition 2.0 6864 60947-7-1 Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors - Edition 2009 IEC 0 3.0 6865 60947-7-2 Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment Protective conductor terminal blocks for copper 2009 IEC 0 conductors - Edition 3.0 6866 60947-7-3 Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment Safety requirements for fuse terminal blocks - 2009 IEC 0 Edition 2.0 6867 60947-5-1 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical 2009 IEC 0 control circuit devices - Edition 4.0 6868 60988 Nuclear power plants Instrumentation important to safety Acoustic monitoring systems for detection of loose parts: 2009 IEC 0 characteristics, design criteria and operational procedures - Edition 2.0 6869 60974-8 Arc welding equipment Part 8: Gas consoles for welding and plasma cutting systems - Edition 2.0 2009 IEC 0 6870 60966-3-1 Radio frequency and coaxial cable assemblies Part 3-1: Blank detail specification for semi-flexible coaxial cable 2009 IEC 0 assemblies - Edition 3.0 6871 60966-2-5 Radio frequency and coaxial cable assemblies Part 2-5: Detail specification for cable assemblies for radio and TV receivers 2009 IEC 0 Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors - Edition 4.0 6872 60966-2-6 Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers 2009 IEC 0 Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors - Edition 4.0 6873 60917-1 Modular order for the development of mechanical structures for electronic equipment practices Part 1: Generic standard - 2009 IEC 0 Edition 1.1 Consolidated Reprint 6874 60904-4 Photovoltaic devices Part 4: Reference solar devices Procedures for establishing calibration traceability - Edition 1.0 2009 IEC 0 6875 60906-1 IEC system of plugs and socket-outlets for household and similar purposes Part 1: Plugs and socket-outlets 16 A 250 V a.c. 2009 IEC 0 - Edition 2.0 6876 60909-3 Short-circuit currents in three-phase AC systems Part 3: Currents during two separate simultaneous line-to-earth short 2009 IEC 0 circuits and partial short-circuit currents flowing through earth - Edition 3.0 6877 60909-3 NULL 2009 IEC 0 (REDLINE) 6878 60904-10 Photovoltaic devices Part 10: Methods of linearity measurement - Edition 2.0 2009 IEC 0 6879 60893-3-5 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-5: 2009 IEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on polyester resins - Edition 2.1 Consolidated 6880 60893-3-6 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: 2009 IEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins - Edition 2.1 Consolidated R 6881 60893-3-7 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7: 2009 IEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on polyimide resins - Edition 2.1 Consolidated 6882 60891 Photovoltaic devices Procedures for temperature and irradiance corrections to measured I-V characteristics - Edition 2.0 2009 IEC 0 6883 60747-14-3 Semiconductor devices Part 14-3: Semiconductor sensors Pressure sensors - Edition 2.0 2009 IEC 0 6884 60747-5-2 Discrete semiconductor devices and integrated circuits Part 5-2: Optoelectronic devices Essential ratings and 2009 IEC 0 characteristics - Edition 1.1 Consolidated Reprint 6885 60747-5-3 Discrete semiconductor devices and integrated circuits Part 5-3: Optoelectronic devices Measuring methods - Edition 1.1 2009 IEC 0 Consolidated Reprint 6886 60738-1 Thermistors Directly heated positive temperature coefficient Part 1: Generic specification - Edition 3.1 Consolidated 2009 IEC 0 Reprint 6887 60745-2-15 Hand-held motor-operated electric tools Safety Part 2-15: Particular requirements for hedge trimmers - Edition 2.1 2009 IEC 0 Consolidated Reprint 6888 60730-2-5 Automatic electrical controls for household and similar use Part 2-5: Particular requirements for automatic electrical burner 2009 IEC 0 control systems - Edition 4.0 6889 60728-7-3 Cable networks for television signals, sound signals and interactive services Part 7-3: Hybrid fibre coax outside plant status 2009 IEC 0 monitoring Power supply to transponder interface bus (PSTIB) - Edition 2.0 6890 60749-20-1 Semiconductor devices Mechanical and climatic test methods Part 20-1: Handling, packing, labelling and shipping of 2009 IEC 0 surface-mount devices sensitive to the combined effect of moisture and soldering heat - Edition 1.0 6891 60789 CORR 1 NULL 2009 IEC 0 6892 60768 Nuclear power plants Instrumentation important to safety Equipment for continuous in-line or on-line monitoring of 2009 IEC 0 radioactivity in process streams for normal and incident conditions - Edition 2.0 6893 60793-2-40 Optical fibres Part 2-40: Product specifications Sectional specification for category A4 multimode fibres - Edition 4.0 2009 IEC 0 6894 60793-1-47 Optical fibres Part 1-47: Measurement methods and test procedures Macrobending loss - Edition 3.0 2009 IEC 0 6895 60704-2-2 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-2: 2009 IEC 0 Particular requirements for fan heaters - Edition 2.0 6896 60695-1-10 Fire hazard testing Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines - 2009 IEC 0 Edition 2.0 6897 60728-1-2 Cable networks for television signals, sound signals and interactive services Part 1-2: Performance requirements for signals 2009 IEC 0 delivered at the system outlet in operation - Edition 2.0 6898 60644 Specification for high-voltage fuse-links for motor circuit applications - Edition 2.0 2009 IEC 0 6899 60645-6 Electroacoustics Audiometric equipment Part 6: Instruments for the measurement of otoacoustic emissions - Edition 1.0 2009 IEC 0 6900 60645-7 Electroacoustics Audiometric equipment Part 7: Instruments for the measurement of auditory brainstem responses - 2009 IEC 0 Edition 1.0 6901 60669-2-1 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches - 2009 IEC 0 Edition 4.2 Consolidated Reprint 6902 61249-2-31 Materials for printed boards and other interconnecting structures Part 2-31: Reinforced base materials, clad and unclad 2009 IEC 0 Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less tha 6903 61249-2-32 Materials for printed boards and other interconnecting structures Part 2-32: Reinforced base materials, clad and unclad 2009 IEC 0 Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less tha 6904 61249-2-33 Materials for printed boards and other interconnecting structures Part 2-33: Reinforced base materials, clad and unclad 2009 IEC 0 Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less 6905 61249-2-34 Materials for printed boards and other interconnecting structures Part 2-34: Reinforced base materials, clad and unclad 2009 IEC 0 Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less 6906 61243-1 Live working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. - Edition 2.1 2009 IEC 0 Consolidated Reprint 6907 61243-3 Live working Voltage detectors Part 3: Two-pole low-voltage type - Edition 3.0 2009 IEC 0 6908 61226 Nuclear power plants Instrumentation and control important to safety Classification of instrumentation and control 2009 IEC 0 functions - Edition 3.0 6909 61196-6 Coaxial communication cables Part 6: Sectional specification for CATV drop cables - Edition 1.0 2009 IEC 0 6910 61196-6-1 Coaxial communication cables Part 6-1: Blank detail specification for CATV drop cables - Edition 1.0 2009 IEC 0 6911 61202-1 Fibre optic interconnecting devices and passive components Fibre optic isolators Part 1: Generic specification - Edition 2009 IEC 0 4.0 6912 61196-1-113 Coaxial communication cables Part 1-113: Electrical test methods Test for attenuation constant - Edition 1.0 2009 IEC 0 6913 61196-1-208 Coaxial communication cables Part 1-208: Environmental test methods Longitudinal pneumatic resistance - Edition 1.0 2009 IEC 0 6914 61196-1-313 Coaxial communication cables Part 1-313: Mechanical test methods Adhesion of dielectric and sheath - Edition 1.0 2009 IEC 0 6915 61196-1-201 Coaxial communication cables Part 1-201: Environmental test methods Test for cold bend performance of cable - Edition 2009 IEC 0 1.0 6916 61169-39 Radio-frequency connectors Part 39: Sectional specification for CQM series quick lock RF connectors - Edition 1.0 2009 IEC 0 6917 61169-24 Radio-frequency connectors Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, 2009 IEC 0 typically for use in 75 ohm cable networks (type F) - Edition 2.0 6918 61188-7 Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD 2009 IEC 0 library construction - Edition 2.0 6919 61188-7 CORR NULL 2009 IEC 0 1 6920 61300-3-7 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: 2009 IEC 0 Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components - Edition 2.0 6921 61300-3-43 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-43: 2009 IEC 0 Examinations and measurements Mode transfer function measurement for fibre optic sources - Edition 1.0 6922 61300-3-34 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-34: 2009 IEC 0 Examinations and measurements Attenuation of random mated connectors - Edition 3.0 6923 61300-3-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: 2009 IEC 0 Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers - Edition 2.0 6924 61300-3-3 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: 2009 IEC 0 Examinations and measurements Active monitoring of changes in attenuation and return loss - Edition 3.0 6925 61300-2-5 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-5: Tests 2009 IEC 0 Torsion - Edition 3.0 6926 61300-2-48 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-48: Tests 2009 IEC 0 Temperature-humidity cycling - Edition 2.0 6927 61300-3-2 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: 2009 IEC 0 Examination and measurements Polarization dependent loss in a single-mode fibre optic device - Edition 3.0 6928 61249-4-14 Materials for printed boards and other interconnecting structures Part 4-14: Sectional specification set for prepreg 2009 IEC 0 materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning tes 6929 61249-4-15 Materials for printed boards and other interconnecting structures Part 4-15: Sectional specification set for prepreg 2009 IEC 0 materials, unclad (for the manufacture of multilayer boards) Multifunctional epoxide woven E-glass prepreg of defined flammability (vert 6930 61249-4-16 Materials for printed boards and other interconnecting structures Part 4-16: Sectional specification set for prepreg 2009 IEC 0 materials, unclad (for the manufacture of multilayer boards) Multifunctional non-halogenated epoxide woven E-glass prepreg of defined fl 6931 61249-4-17 Materials for printed boards and other interconnecting structures Part 4-17: Sectional specification set for prepreg 2009 IEC 0 materials, unclad (for the manufacture of multilayer boards) Non-halogenated epoxide woven E-glass prepreg of defined flammability (vert 6932 61280-2-3 Fibre optic communication subsystem test procedures Part 2-3: Digital systems Jitter and wander measurements - Edition 2009 IEC 0 1.0 6933 61280-2-9 Fibre optic communication subsystem test procedures Part 2-9: Digital systems Optical signal-to-noise ratio measurement 2009 IEC 0 for dense wavelength-division multiplexed systems - Edition 2.0 6934 61280-4-1 Fibre-optic communication subsystem test procedures Part 4-1: Installed cable plant Multimode attenuation measurement 2009 IEC 0 - Edition 2.0 6935 61280-1-4 Fibre optic communication subsystem test procedures Part 1-4: General communication subsystems Light source encircled 2009 IEC 0 flux measurement method - Edition 2.0 6936 61290-10-1 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical 2009 IEC 0 spectrum analyzer - Edition 2.0 6937 61300-2-12 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-12: Tests 2009 IEC 0 Impact - Edition 3.0 6938 61300-2-1 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests 2009 IEC 0 Vibration (sinusoidal) - Edition 3.0 6939 61300-2-2 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-2: Tests 2009 IEC 0 Mating durability - Edition 3.0 6940 61300-2-21 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-21: Tests 2009 IEC 0 Composite temperature/humidity cyclic test - Edition 2.0 6941 61300-2-34 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-34: Tests 2009 IEC 0 Resistance to solvents and contaminating fluids of interconnecting components and closures - Edition 2.0 6942 61010-2-081 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular 2009 IEC 0 requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes - Edition 2.0 6943 61000-4-7 Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and 2009 IEC 0 interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto - Edition 2.1; Consolidated Reprint 6944 61000-4-8 Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques Power frequency magnetic field 2009 IEC 0 immunity test - Edition 2.0 6945 61000-4-8 NULL 2009 IEC 0 (REDLINE) 6946 61003-2 Industrial-process control systems - Instruments with analogue inputs and two or multi-position outputs - Part 2: Guidance 2009 IEC 0 for inspection and routine testing - Edition 2.0 6947 61000-4-27 Electromagnetic compatibility (EMC) Part 4-27: Testing and measurement techniques Unbalance, immunity test for 2009 IEC 0 equipment with input current not exceeding 16 A per phase - Edition 1.1; Consolidated Reprint 6948 61000-4-28 Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques Variation of power frequency, 2009 IEC 0 immunity test for equipment with input current not exceeding 16 A per phase - Edition 1.2; Consolidated Reprint 6949 61000-4-17 Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques Ripple on d.c. input power port 2009 IEC 0 immunity test - Edition 1.2; Consolidated Reprint 6950 61000-4-5 NULL 2009 IEC 0 CORR 6951 61000-4-34 Electromagnetic compatibility (EMC) Part 4-34: Testing and measurement techniques Voltage dips, short interruptions 2009 IEC 0 and voltage variations immunity tests for equipment with mains current more than 16 A per phase - Edition 1.1; Consolidated Reprint 6952 61000-3-2 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 2009 IEC 0 â_¤ 16 A per phase) - Edition 4.0 6953 61000-3-2 NULL 2009 IEC 0 CORR 1 6954 61000-4-13 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques Harmonics and interharmonics 2009 IEC 0 including mains signalling at a.c. power port, low frequency immunity tests - Edition 1.2 Consolidated Reprint 6955 61000-4-14 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques Voltage fluctuation immunity test 2009 IEC 0 for equipment with input current not exceeding 16 A per phase - Edition 1.2; Consolidated Reprint 6956 61058-1 CORR NULL 2009 IEC 0 1 6957 61076-3-117 Connectors for electronic equipment Product requirements Part 3-117: Rectangular connectors Detail specification for 2009 IEC 0 protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 ser 6958 61073-1 Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical 2009 IEC 0 fibres and cables Part 1: Generic specification - Edition 4.0 6959 61020-1 Electromechanical switches for use in electrical and electronic equipment Part 1: Generic specification - Edition 2.0 2009 IEC 0 6960 61051-2 AMD AMENDMENT 1 Varistors for use in electronic equipment Part 2: Sectional specification for surge suppression varistors - 2009 IEC 0 1 Edition 1.0 6961 61095 Electromechanical contactors for household and similar purposes - Edition 2.0 2009 IEC 0 6962 61094-2 Electroacoustics Measurement microphones Part 2: Primary method for pressure calibration of laboratory standard 2009 IEC 0 microphones by the reciprocity technique - Edition 2.0 6963 61076-3-114 Connectors for electronic equipment Product requirements Part 3-114: Rectangular connectors Detail specification for 2009 IEC 0 protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments inc 6964 61076-3-115 Connectors for electronic equipment Product requirements Part 3-115: Rectangular connectors Detail specification for 2009 IEC 0 protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments inc 6965 61156-3-1 Multicore and symmetrical pair/quad cables for digital communications Part 3-1: Work area wiring Blank detail 2009 IEC 0 specification - Edition 3.0 6966 61156-1 Multicore and symmetrical pair/quad cables for digital communications Part 1: Generic specification - Edition 3.1; 2009 IEC 0 Consolidated Reprint 6967 61156-5-1 Multicore and symmetrical pair/quad cables for digital communications Part 5-1: Symmetrical pair/quad cables with 2009 IEC 0 transmission characteristics up to 1 000 MHz Horizontal floor wiring Blank detail specification - Edition 3.0 6968 61156-6-1 Multicore and symmetrical pair/quad cables for digital communications Part 6-1: Symmetrical pair/quad cables with 2009 IEC 0 transmission characteristics up to 1 000 MHz Work area wiring Blank detail specification - Edition 3.0 6969 61156-4 Multicore and symmetrical pair/quad cables for digital communications Part 4: Riser cables Sectional specification - 2009 IEC 0 Edition 3.0 6970 61156-4-1 Multicore and symmetrical pair/quad cables for digital communications Part 4-1: Riser cables Blank detail specification - 2009 IEC 0 Edition 3.0 6971 61111 Live working Electrical insulating matting - Edition 2.0 2009 IEC 0 6972 61112 Live working Electrical insulating blankets - Edition 2.0 2009 IEC 0 6973 61140 Protection against electric shock Common aspects for installations and equipment - Edition 4.0 2009 IEC 0 6974 61109 Insulators for overhead lines Composite suspension and tension insulators for a.c. systems with a nominal voltage greater 2008 IEC 0 than 1 000 V Definitions, test methods and acceptance criteria - Edition 2.0 6975 61156-3 Multicore and symmetrical pair/quad cables for digital communications Part 3: Work area cable Sectional specification - 2008 IEC 0 Edition 3.0 6976 61097-2 Global maritime distress and safety system (GMDSS) Part 2: COSPAS-SARSAT EPIRB Satellite emergency position 2008 IEC 0 indicating radio beacon operating on 406 MHz Operational and performance requirements, methods of testing and required test results - Edition 3. 6977 61076-2-104 Connectors for electronic equipment Product requirements Part 2-104: Circular connectors Detail specification for 2008 IEC 0 circular connectors with M8 screw-locking or snap-locking - Edition 2.0 6978 61076-3-116 Connectors for electronic equipment Product requirements Part 3-116: Rectangular connectors Detail specification for 2008 IEC 0 protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments inc 6979 61076-3 Connectors for electronic equipment Product requirements Part 3: Rectangular connectors Sectional specification - 2008 IEC 0 Edition 2.0 6980 61076-3-001 Connectors for electronic equipment Product requirements Part 3-001: Rectangular connectors Blank detail specification 2008 IEC 0 - Edition 2.0 6981 61076-2-105 Connectors for electronic equipment Product requirements Part 2-105: Circular connectors Detail specification for M5 2008 IEC 0 connectors with screw-locking - Edition 1.0 6982 61058-1 Switches for appliances Part 1: General requirements - Edition 4.0 2008 IEC 0 6983 61039 Classification of insulating liquids - Edition 2.0 2008 IEC 0 6984 61000-4-6 Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, 2008 IEC 0 induced by radio-frequency fields - Edition 4.0 6985 61000-4-6 NULL 2008 IEC 0 (REDLINE) 6986 61000-4-2 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test 2008 IEC 0 - Edition 2.0 6987 61000-4-30 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement 2008 IEC 0 methods - Edition 3.0 6988 61010-031 Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for 2008 IEC 0 hand-held probe assemblies for electrical measurement and test - Edition 2.0 6989 61300-2-15 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-15: Tests 2008 IEC 0 Torque strength of coupling mechanism - Edition 2.0 6990 61291-6-1 Optical amplifiers Part 6-1: Interfaces Command set - Edition 1.0 2008 IEC 0 6991 61290-11-1 Optical amplifiers Test methods Part 11-1: Polarization mode dispersion parameter Jones matrix eigenanalysis (JME) - 2008 IEC 0 Edition 2.0 6992 61290-3-2 Optical amplifiers Test methods Part 3-2: Noise figure parameters Electrical spectrum analyzer method - Edition 2.0 2008 IEC 0 6993 61290-3 Optical amplifiers Test methods Part 3: Noise figure parameters - Edition 2.0 2008 IEC 0 6994 61298-1 Process measurement and control devices General methods and procedures for evaluating performance Part 1: General 2008 IEC 0 considerations - Edition 2.0 6995 61298-2 Process measurement and control devices General methods and procedures for evaluating performance Part 2: Tests under 2008 IEC 0 reference conditions - Edition 2.0 6996 61298-3 Process measurement and control devices General methods and procedures for evaluating performance Part 3: Tests for 2008 IEC 0 the effects of influence quantities - Edition 2.0 6997 61298-4 Process measurement and control devices General methods and procedures for evaluating performance Part 4: Evaluation 2008 IEC 0 report content - Edition 2.0 6998 61249-4-1 Materials for printed boards and other interconnecting structures Part 4-1: Sectional specification set for prepreg materials, 2008 IEC 0 unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability - Edition 1.0 6999 61300-3-6 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: 2008 IEC 0 Examinations and measurements Return loss - Edition 3.0 7000 61326-3-1 Electrical equipment for measurement, control and laboratory use EMC requirements Part 3-1: Immunity requirements for 2008 IEC 0 safety-related systems and for equipment intended to perform safety-related functions (functional safety) General industrial applicati 7001 61326-3-1 NULL 2008 IEC 0 CORR 1 7002 61326-3-2 Electrical equipment for measurement, control and laboratory use EMC requirements Part 3-2: Immunity requirements for 2008 IEC 0 safety-related systems and for equipment intended to perform safety-related functions (functional safety) Industrial applications with 7003 61169-38 Radio-frequency connectors Part 38: Sectional specification Radio frequency coaxial connectors model, slide-in (rack and 2008 IEC 0 panel applications) Characteristic impedance 50 ohm (type TMA) 50 ohm applications - Edition 1.0 7004 61169-4 Radio-frequency connectors Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with 2008 IEC 0 screw lock Characteristic impedance 50 Ohms (type 7-16) - Edition 1.0 7005 61174 Maritime navigation and radiocommunication equipment and systems Electronic chart display and information system 2008 IEC 0 (ECDIS) Operational and performance requirements, methods of testing and required test results - Edition 4.0 7006 61196-1-205 Coaxial communication cables Part 1-205: Environmental test methods Resistance to solvents and contaminating fluids - 2008 IEC 0 Edition 1.0 7007 61196-1-106 Coaxial communication cables Part 1-106: Electrical test methods Test for withstand voltage of cable sheath - Edition 1.0 2008 IEC 0 7008 61196-1-325 Coaxial communication cables Part 1-325: Mechanical test methods Aeolian vibration - Edition 1.0 2008 IEC 0 7009 61196-1-318 Coaxial communication cables Part 1-318: Mechanical test methods Heat performance tests - Edition 1.0 2008 IEC 0 7010 61230 Live working Portable equipment for earthing or earthing and short-circuiting - Edition 2.0 2008 IEC 0 7011 61227 Nuclear power plants Control rooms Operator controls - Edition 2.0 2008 IEC 0 7012 61228 Fluorescent ultraviolet lamps used for tanning Measurement and specification method - Edition 2.0 2008 IEC 0 7013 61242 AMD 1 Electrical accessories Cable reels for household and similar purposes - Edition 1.0 2008 IEC 0 7014 61249-2-35 Materials for printed boards and other interconnecting structures Part 2-35: Reinforced base materials, clad and unclad 2008 IEC 0 Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copperclad for lead-free assembly - E 7015 61249-2-36 Materials for printed boards and other interconnecting structures Part 2-36: Reinforced base materials, clad and unclad 2008 IEC 0 Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly - Edition 1 7016 61249-2-37 Materials for printed boards and other interconnecting structures Part 2-37: Reinforced base materials, clad and unclad 2008 IEC 0 Modified nonhalogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper- clad for lead-f 7017 61249-2-38 Materials for printed boards and other interconnecting structures Part 2-38: Reinforced base materials, clad and unclad 2008 IEC 0 Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free asse 7018 60689 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values 2008 IEC 0 - Edition 2.0 7019 60641-3-1 Pressboard and presspaper for electrical purposes Part 3: Specifications for individual materials Sheet 1: Requirements for 2008 IEC 0 pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 - Edition 2.0 7020 60724 Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) - 2008 IEC 0 Edition 3.1 Consolidated Reprint 7021 60721-3-3 Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their 2008 IEC 0 CORR 1 severities Stationary use at weatherprotected locations - Edition 2.2 Consolidated Reprint 7022 60695-1-30 Fire hazard testing Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Preselection testing 2008 IEC 0 process General guidelines - Edition 3.0 7023 60695-8-1 Fire hazard testing Part 8-1: Heat release General guidance - Edition 3.0 2008 IEC 0 7024 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing - Edition 2.0 2008 IEC 0 7025 60703 Test methods for electroheating installations with electron guns - Edition 2.0 2008 IEC 0 7026 60793-2-60 Optical fibres Part 2-60: Product specifications Sectional specification for category C singlemode intraconnection fibres - 2008 IEC 0 Edition 1.0 7027 60758 Synthetic quartz crystal Specifications and guidelines for use - Edition 5.0 2008 IEC 0 7028 60793-1-1 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance - Edition 4.0 2008 IEC 0 7029 60779 CORR 1 CORRIGENDUM 1 Industrial electroheat equipment Test methods for electroslag remelting furnaces - Edition 2.0 2008 IEC 0 7030 60749-20 Semiconductor devices Mechanical and climatic test methods Part 20: Resistance of plastic encapsulated SMDs to the 2008 IEC 0 combined effect of moisture and soldering heat - Edition 2.0 7031 60751 Industrial platinum resistance thermometers and platinum temperature sensors - Edition 2.0 2008 IEC 0 7032 60749-37 Semiconductor devices Mechanical and climatic test methods Part 37: Board level drop test method using an 2008 IEC 0 accelerometer - Edition 1.0 7033 60749-38 Semiconductor devices Mechanical and climatic test methods Part 38: Soft error test method for semiconductor devices 2008 IEC 0 with memory - Edition 1.0 7034 60730-2-14 Automatic electrical controls for household and similar use Part 2-14: Particular requirements for electric actuators - 2008 IEC 0 Edition 1.2 Consolidated Reprint 7035 60730-2-15 Automatic electrical controls for household and similar use Part 2-15: Particular requirements for automatic electrical air 2008 IEC 0 flow, water flow and water level sensing controls - Edition 2.0 7036 60730-2-7 Automatic electrical controls Part 2-7: Particular requirements for timers and time switches - Edition 3.0 2008 IEC 0 7037 60745-2-1 Hand-held motor-operated electric tools Safety Part 2-1: Particular requirements for drills and impact drills - Edition 2.1 2008 IEC 0 Consolidated Reprint 7038 60745-2-11 Hand-held motor-operated electric tools Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre 2008 IEC 0 saws) - Edition 2.1 Consolidated Reprint 7039 60745-2-12 Hand-held motor-operated electric tools Safety Part 2-12: Particular requirements for concrete vibrators - Edition 2.1 2008 IEC 0 Consolidated Reprint 7040 60745-2-16 Hand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackers - Edition 2.0 2008 IEC 0 7041 60745-2-2 Hand-held motor-operated electric tools Safety Part 2-2: Particular requirements for screwdrivers and impact wrenches - 2008 IEC 0 Edition 2.1 Consolidated Reprint 7042 60745-2-20 Hand-held motor-operated electric tools Safety Part 2-20: Particular requirements for band saws - Edition 1.1 2008 IEC 0 Consolidated Reprint 7043 60745-2-21 Hand-held motor-operated electric tools Safety Part 2-21: Particular requirements for drain cleaners - Edition 1.1 2008 IEC 0 Consolidated Reprint 7044 60745-2-18 Hand-held motor-operated electric tools Safety Part 2-18: Particular requirements for strapping tools - Edition 1.1 2008 IEC 0 Consolidated Reprint 7045 60745-2-4 Hand-held motor-operated electric tools Safety Part 2-4: Particular requirements for sanders and polishers other than disk 2008 IEC 0 type - Edition 2.1 Consolidated Reprint 7046 60743 Live working Terminology for tools, devices and equipment - Edition 3.0 2008 IEC 0 7047 60738-1-1 Thermistors Directly heated positive step-function temperature coefficient Part 1-1: Blank detail specification Current 2008 IEC 0 limiting application Assessment level EZ - Edition 3.0 7048 60738-1-2 Thermistors Directly heated positive step-function temperature coefficient Part 1-2: Blank detail specification Heating 2008 IEC 0 element application Assessment level EZ - Edition 2.0 7049 60738-1-3 Thermistors Directly heated positive step-function temperature coefficient Part 1-3: Blank detail specification Inrush 2008 IEC 0 current application Assessment level EZ - Edition 2.0 7050 60738-1-4 Thermistors Directly heated positive step-function temperature coefficient Part 1-4: Blank detail specification Sensing 2008 IEC 0 application Assessment level EZ - Edition 2.0 7051 60747-16-2 Semiconductor devices Part 16-2: Microwave integrated circuits Frequency prescalers - Edition 1.1 Consolidated Reprint 2008 IEC 0 7052 60745-2-8 Hand-held motor-operated electric tools Safety Part 2-8: Particular requirements for shears and nibblers - Edition 2.1 2008 IEC 0 Consolidated Reprint 7053 60745-2-9 Hand-held motor-operated electric tools Safety Part 2-9: Particular requirements for tappers - Edition 2.1 Consolidated 2008 IEC 0 Reprint 7054 60745-2-6 Hand-held motor-operated electric tools Safety Part 2-6: Particular requirements for hammers - Edition 2.2 Consolidated 2008 IEC 0 Reprint 7055 60748-2-20 Semiconductor devices Integrated circuits Part 2-20: Digital integrated circuits Family specification Low voltage 2008 IEC 0 integrated circuits - Edition 2.0 7056 60904-7 Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices - 2008 IEC 0 Edition 3.0 7057 60904-3 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral 2008 IEC 0 irradiance data - Edition 3.0 7058 60915 CORR 2 Capacitors and resistors for use in electronic equipment Preferred dimensions of shaft ends, bushes and for the mounting of 2008 IEC 0 single-hole, bush-mounted, shaft-operated electronic components CORRIGENDUM 2 - Edition 2.0 7059 60945 CORR 1 Maritime Navigation and Radiocommunication Equipment and Systems - General Requirements - Methods of Testing and 2008 IEC 0 Required Test Results - Edition 4.0 7060 60966-3 Radio frequency and coaxial cable assemblies Part 3: Sectional specification for semi-flexible coaxial cable assemblies - 2008 IEC 0 Edition 3.0 7061 60986 Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) 2008 IEC 0 - Edition 2.1 Consolidated Reprint 7062 60949 AMD 1 AMENDMENT 1 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating 2008 IEC 0 effects - Edition 1.0 7063 60958-1 Digital audio interface Part 1: General - Edition 3.1 Consolidated Reprint 2008 IEC 0 7064 60966-2-1 Radio frequency and coaxial cable assemblies Part 2-1: Sectional specification for flexible coaxial cable assemblies - 2008 IEC 0 Edition 3.0 7065 60958-4 Digital audio interface Part 4: Professional applications - Edition 2.1 Consolidated Reprint 2008 IEC 0 7066 60853-1 AMD AMENDMENT 2 Calculation of the cyclic and emergency current rating of cables Part 1: Cyclic rating factor for cables 2008 IEC 0 2 up to and including 18/30 (36) kV - Edition 1.0 7067 60853-2 AMD AMENDMENT 1 Calculation of the cyclic and emergency current rating of cables Part 2: Cyclic rating of cables greater 2008 IEC 0 1 than 18/30 (36) kV and emergency ratings for cables of all voltages - Edition 1.0 7068 60825-1 CORR NULL 2008 IEC 0 1 7069 60794-3-30 Optical fibre cables Part 3-30: Outdoor cables Family specification for optical telecommunication cables for lakes, river 2008 IEC 0 crossings and coastal applications - Edition 2.0 7070 60794-3-40 Optical fibre cables Part 3-40: Outdoor cables Family specification for sewer cables and conduits for installation by 2008 IEC 0 blowing and/or pulling in non-man accessible storm and sanitary sewers - Edition 1.0 7071 60794-3-50 Optical fibre cables Part 3-50: Outdoor cables Family specification for gas pipe cables and subducts for installation by 2008 IEC 0 blowing and/or pulling/dragging in gas pipes - Edition 1.0 7072 60794-3-60 Optical fibre cables Part 3-60: Outdoor cables Family specification for drinking water pipe cables and subducts for 2008 IEC 0 installation by blowing and/or pulling/dragging/floating in drinking water pipes - Edition 1.0 7073 60794-2-30 Optical fibre cables Part 2-30: Indoor cables Family specification for ribbon cables - Edition 2.0 2008 IEC 0 7074 60794-2-20 Optical fibre cables Part 2-20: Indoor cables Family specification for multi-fibre optical distribution cables - Edition 3.0 2008 IEC 0 7075 60794-2-40 Optical fibre cables Part 2-40: Indoor optical fibre cables Family specification for A4 fibre cables - Edition 2.0 2008 IEC 0 7076 60794-2-41 Optical fibre cables Part 2-41: Indoor cables Product specification for simplex and duplex buffered A4 fibres - Edition 1.0 2008 IEC 0 7077 60794-2-42 Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 2008 IEC 0 fibres - Edition 1.0 7078 60794-2-50 Optical fibre cables Part 2-50: Indoor cables Family specification for simplex and duplex cables for use in terminated 2008 IEC 0 cable assemblies - Edition 1.0 7079 60254-2 Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells - Edition 4.0 2008 IEC 0 7080 60245-1 Rubber insulated cables Rated voltages up to and including 450/750 V Part 1: General requirements - Edition 4.1; 2008 IEC 0 Consolidated Reprint 7081 60216-5 NULL 2008 IEC 0 7082 60204-32 Safety of machinery Electrical equipment of machines Part 32: Requirements for hoisting machines - Edition 2.0 2008 IEC 0 7083 60297-3-100 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2008 IEC 0 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets - Edition 1.0 7084 60300-3-16 Dependability management Part 3-16: Application guide Guidelines for specification of maintenance support services - 2008 IEC 0 Edition 1.0 7085 60297-3-105 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2008 IEC 0 3-105: Dimensions and design aspects for 1U high chassis - Edition 1.0 7086 60317-0-3 Specifications for particular types of winding wires Part 0-3: General requirements Enamelled round aluminium wire - 2008 IEC 0 Edition 3.1 Consolidated Reprint 7087 60317-0-1 Specifications for particular types of winding wires - Part 0-1: General requirements Enamelled round copper wire - 2008 IEC 0 Edition 4.0 7088 60287-2-1 NULL 2008 IEC 0 CORR 1 7089 60286-2 Packaging of components for automatic handling Part 2: Packaging of components with unidirectional leads on continuous 2008 IEC 0 tapes - Edition 4.0 7090 60282-2 High-voltage fuses Part 2: Expulsion fuses - Edition 3.0 2008 IEC 0 7091 60191-2 AMD Mechanical standardization of semiconductor devices Part 2: Dimensions Amendment 17 - Edition 1.0 2008 IEC 0 17 7092 60092-507 Electrical installations in ships Part 507: Small vessels - Edition 3.0 2008 IEC 0 7093 60095-4 Lead-acid starter batteries Part 4: Dimensions of batteries for heavy vehicles - Edition 2.0 2008 IEC 0 7094 60115-1 Fixed resistors for use in electronic equipment Part 1: Generic specification - Edition 4.0 2008 IEC 0 7095 60137 Insulated bushings for alternating voltages above 1 000 V - Edition 6.0 2008 IEC 0 7096 60068-2-31 Environmental testing Part 2-31: Tests Test Ec: Rough handling shocks, primarily for equipment-type specimens - Edition 2008 IEC 0 2.0 7097 60068-2-27 Environmental testing Part 2-27: Tests Test Ea and guidance: Shock - Edition 4.0 2008 IEC 0 7098 60068-2-20 Environmental testing Part 2-20: Tests Test T: Test methods for solderability and resistance to soldering heat of devices 2008 IEC 0 with leads - Edition 5.0 7099 60068-2-64 Environmental testing Part 2-64: Tests Test Fh: Vibration, broadband random and guidance - Edition 2.0 2008 IEC 0 7100 60076-12 Power transformers Part 12: Loading guide for dry-type power transformers - Edition 1.0 2008 IEC 0 7101 60076-15 Power transformers Part 15: Gas-filled power transformers - Edition 2.0 2008 IEC 0 7102 60079-1 CORR NULL 2008 IEC 0 1 7103 60079-10-1 Explosive atmospheres Part 10-1: Classification of areas Explosive gas atmospheres - Edition 2.0 2008 IEC 0 7104 60079-31 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure â__tâ__ - Edition 2.0 2008 IEC 0 7105 60092-350 Electrical installations in ships Part 350: General construction and test methods of power, control and instrumentation 2008 IEC 0 cables for shipboard and offshore applications - Edition 4.0 7106 60092-350 PDF NULL 2008 IEC 0 7107 060068-2-20 NULL 2008 IEC 0 7108 060335-2-78 NULL 2008 IEC 0 7109 060335-2-82 NULL 2008 IEC 0 7110 060745-2-12 NULL 2008 IEC 0 7111 0TS 62500 NULL 2008 IEC 0 7112 60034-30 NULL 2008 IEC 0 7113 60034-29 Rotating electrical machines Part 29: Equivalent loading and superposition techniques Indirect testing to determine 2008 IEC 0 temperature rise - Edition 1.0 7114 60034-4 Rotating electrical machines Part 4: Methods for determining synchronous machine quantities from tests - Edition 3.0 2008 IEC 0 7115 60050-426 International Electrotechnical Vocabulary Part 426: Equipment for explosive atmospheres - Edition 2.0 2008 IEC 0 7116 60050-461 International Electrotechnical Vocabulary Part 461: Electric cables - Edition 2.0 2008 IEC 0 7117 60050-121 AMENDMENT 2 International Electrotechnical Vocabulary Part 121: Electromagnetism - Edition 2.0 2008 IEC 0 AMD 2 7118 60050-131 AMENDMENT 1 International Electrotechnical Vocabulary Part 131: Circuit theory - Edition 2.0 2008 IEC 0 AMD 1 7119 60061-2 AMD Amendment 37 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2008 IEC 0 37 Lampholders - Edition 3.32 7120 60061-1 AMD Amendment 40 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2008 IEC 0 40 caps - Edition 3.35 7121 60050-851 International Electrotechnical Vocabulary Part 851: Electric welding - Edition 2.0 2008 IEC 0 7122 60050-851 International Electrotechnical Vocabulary Part 851: Electric welding - Edition 2.0 2008 IEC 0 AMD 1 7123 60050-581 International Electrotechnical Vocabulary Part 581: Electromechanical components for electronic equipment - Edition 2.0 2008 IEC 0 7124 60335-2-106 CORRIGENDUM 1 Household and similar electrical appliances Safety Part 2-106: Particular requirements for heated 2008 IEC 0 CORR 1 carpets and for heating units for room heating installed under removable floor coverings - Edition 1.0 7125 60335-2-108 Household and similar electrical appliances Safety Part 2-108: Particular requirements for electrolysers - Edition 1.0 2008 IEC 0 7126 60335-2-105 Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower 2008 IEC 0 cabinets - Edition 2.0 7127 60335-2-101 Household and similar electrical appliances Safety Part 2-101: Particular requirements for vaporizers - Edition 1.2 2008 IEC 0 Consolidated Reprint 7128 60335-2-10 Household and similar electrical appliances Safety Part 2-10: Particular requirements for floor treatment machines and wet 2008 IEC 0 scrubbing machines - Edition 5.1 Consolidated Reprint 7129 60335-2-38 Household and similar electrical appliances Safety Part 2-38: Particular requirements for commercial electric griddles and 2008 IEC 0 griddle grills - Edition 5.2 Consolidated Reprint 7130 60335-2-36 Household and similar electrical appliances Safety Part 2-36: Particular requirements for commercial electric cooking 2008 IEC 0 ranges, ovens, hobs and hob elements - Edition 6.0 7131 60335-2-32 Household and similar electrical appliances Safety Part 2-32: Particular requirements for massage appliances - Edition 4.2 2008 IEC 0 Consolidated Reprint 7132 60335-2-47 Household and similar electrical appliances Safety Part 2-47: Particular requirements for commercial electric boiling pan - 2008 IEC 0 Edition 4.2; Consolidated Reprint 7133 60335-2-48 Household and similar electrical appliances Safety Part 2-48: Particular requirements for commercial electric grillers and 2008 IEC 0 toasters - Edition 4.2; Consolidated Reprint 7134 60335-2-49 Household and similar electrical appliances Safety Part 2-49: Particular requirements for commercial electric appliances 2008 IEC 0 for keeping food and crockery warm - Edition 4.1 Consolidated Reprint 7135 60335-2-49(2 NULL 2008 IEC 0 7136 60335-2-43 Household and similar electrical appliances Safety Part 2-43: Particular requirements for clothes dryers and towel rails - 2008 IEC 0 Edition 3.2 Consolidated Reprint 7137 60335-2-50 Household and similar electrical appliances Safety Part 2-50: Particular requirements for commercial electric bains-marie 2008 IEC 0 - Edition 4.1 Consolidated Reprint 7138 60335-2-52 Household and similar electrical appliances Safety Part 2-52: Particular requirements for oral hygiene appliances - Edition 2008 IEC 0 3.1 Consolidated Reprint 7139 60335-2-52(2 NULL 2008 IEC 0 7140 60335-2-54 Household and similar electrical appliances Safety Part 2-54: Particular requirements for surface-cleaning appliances for 2008 IEC 0 household use employing iquids or steam - Edition 4.1 CONSOLIDATED REPRINT 7141 60335-2-12 Household and similar electrical appliances Safety Part 2-12: Particular requirements for warming plates and similar 2008 IEC 0 appliances - Edition 5.1 Consolidated Reprint 7142 60335-2-26 Household and similar electrical appliances Safety Part 2-26: Particular requirements for clocks - Edition 4.1 Consolidated 2008 IEC 0 Reprint 7143 60335-2-28 Household and similar electrical appliances Safety Part 2-28: Particular requirements for sewing machines - Edition 4.1 2008 IEC 0 Consolidated Reprint 7144 60335-2-94 Household and similar electrical appliances Safety Part 2-94: Particular requirements for scissors type grass shears - 2008 IEC 0 Edition 3.0 7145 60335-2-91 Household and Similar Electrical Appliances - Safety - Part 2-91: Particular Requirements for Walk-Behind and Hand-Held 2008 IEC 0 Lawn Trimmers and Lawn Edge Trimmers - Edition 3.0 7146 60335-2-82 Household and similar electrical appliances Safety Part 2-82: Particular requirements for amusement machines and 2008 IEC 0 personal service machines - Edition 2.2 Consolidated Reprint 7147 60335-2-80 Household and similar electrical appliances Safety Part 2-80: Particular requirements for fans - Edition 3.0 2008 IEC 0 7148 60335-2-83 Household and similar electrical appliances Safety Part 2-83: Particular requirements for heated gullies for roof drainage - 2008 IEC 0 Edition 1.1 Consolidated Reprint 7149 60335-2-84 AMENDMENT 2 Household and similar electrical appliances Safety Part 2-84: Particular requirements for toilet 2008 IEC 0 appliances - Edition 2.2 Consolidated Reprint 7150 60335-2-85 Household and similar electrical appliances Safety Part 2-85: Particular requirements for fabric steamers - Edition 2.1 2008 IEC 0 Consolidated Reprint 7151 60335-2-78 Household and similar electrical appliances Safety Part 2-78: Particular requirements for outdoor barbecues - Edition 2.1 2008 IEC 0 Consolidated Reprint 7152 60335-2-7 NULL 2008 IEC 0 (REDLINE) 7153 60335-2-55 Household and similar electrical appliances Safety Part 2-55: Particular requirements for electrical appliances for use with 2008 IEC 0 aquariums and garden ponds - Edition 3.1 Consolidated Reprint 7154 60335-2-56 Household and similar electrical appliances Safety Part 2-56: Particular requirements for projectors and similar appliances 2008 IEC 0 - Edition 3.2 Consolidated Reprint 7155 60335-2-58 Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashing 2008 IEC 0 machines - Edition 3.2; Consolidated Reprint 7156 60335-2-6 Household and similar electrical appliances Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, 2008 IEC 0 ovens and similar appliances - Edition 6.0 7157 60335-2-60 Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool 2008 IEC 0 spas - Edition 3.2 Consolidated Reprint 7158 60335-2-62 Household and similar electrical appliances Safety Part 2-62: Particular requirements for commercial electric rinsing sinks 2008 IEC 0 - Edition 3.1 Consolidated Reprint 7159 60335-2-64 Household and similar electrical appliances Safety Part 2-64: Particular requirements for commercial electric kitchen 2008 IEC 0 machines - Edition 3.1 Consolidated Reprint 7160 60335-2-65 Household and similar electrical appliances Safety Part 2-65: Particular requirements for air-cleaning appliances - Edition 2008 IEC 0 2.2 Consolidated Reprint 7161 60404-8-7 Magnetic materials Part 8-7: Specifications for individual materials Cold-rolled grain-oriented electrical steel strip and 2008 IEC 0 sheet delivered in the fully-processed state - Edition 3.0 7162 60404-4 Magnetic materials Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials - Edition 2.2 2008 IEC 0 Consolidated Reprint 7163 60404-2 Magnetic materials Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means 2008 IEC 0 of an Epstein frame - Edition 3.1 Consolidated Reprint 7164 60399 Barrel thread for lampholders with shade holder ring - Edition 2.1 Consolidated Reprint 2008 IEC 0 7165 60384-20 Fixed capacitors for use in electronic equipment Part 20: Sectional specification Fixed metallized polyphenylene sulfide 2008 IEC 0 film dielectric surface mount d.c. capacitors - Edition 3.0 7166 60384-20 NULL 2008 IEC 0 CORR 1 7167 60384-20-1 Fixed capacitors for use in electronic equipment Part 20-1: Blank detail specification Fixed metallized polyethylene 2008 IEC 0 sulfide film dielectric surface mount d.c. capacitors Assessment level EZ - Edition 2.0 7168 60384-20-1 Fixed capacitors for use in electronic equipment Part 20-1: Blank detail specification Fixed metallized polyethylene 2008 IEC 0 CORR 1 sulfide film dielectric surface mount d.c. capacitors Assessment level EZ - Edition 2.0 7169 60393-1 Potentiometers for use in electronic equipment Part 1: Generic specification - Edition 3.0 2008 IEC 0 7170 60364-4-43 Low-voltage electrical installations Part 4-43: Protection for safety Protection against overcurrent - Edition 3.0 2008 IEC 0 7171 60364-4-43 Low-voltage electrical installations Part 4-43 : Protection for safety Protection against overcurrent CORRIGENDUM 1 - 2008 IEC 0 CORR 1 Edition 3.0 7172 60357 AMD 2 AMENDMENT 2 Tungsten halogen lamps (non-vehicle) Performance specifications - Edition 3.0 2008 IEC 0 7173 60335-2-98 Household and similar electrical appliances Safety Part 2-98: Particular requirements for humidifiers - Edition 2.2; 2008 IEC 0 Consolidated Reprint 7174 60384-1 Fixed capacitors for use in electronic equipment Part 1: Generic specification - Edition 5.0 2008 IEC 0 7175 60384-11 Fixed capacitors for use in electronic equipment Part 11: Sectional specification Fixed polyethylene-terephthalate film 2008 IEC 0 dielectric metal foil d.c. capacitors - Edition 3.0 7176 60384-11-1 Fixed capacitors for use in electronic equipment Part 11-1: Blank detail specification Fixed polyethylene-terephthalate 2008 IEC 0 film dielectric metal foil d.c. capacitors Assessment level EZ - Edition 2.0 7177 60384-1 CORR NULL 2008 IEC 0 1 7178 60519-4 CORR NULL 2008 IEC 0 1 7179 60519-21 Safety in electroheat installations Part 21: Particular requirements for resistance heating equipment Heating and melting 2008 IEC 0 glass equipment - Edition 2.0 7180 60519-7 Safety in electroheat installations Part 7: Particular requirements for installations with electron guns - Edition 2.0 2008 IEC 0 7181 60512-25-9 Connectors for electronic equipment Tests and measurements Part 25-9: Signal integrity tests Test 25i: Alien crosstalk - 2008 IEC 0 Edition 1.0 7182 60512-16-1 Connectors for electronic equipment Tests and measurements Part 16-1: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16a: Probe damage - Edition 1.0 7183 60512-16-11 Connectors for electronic equipment Tests and measurements Part 16-11: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16k: Stripping force, solderless wrapped connections - Edition 1.0 7184 60512-16-13 Connectors for electronic equipment Tests and measurements Part 16-13: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16m: Unwrapping, solderless wrapped connections - Edition 1.0 7185 60512-16-14 Connectors for electronic equipment Tests and measurements Part 16-14: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16n: Bending strength, fixed male tabs - Edition 1.0 7186 60512-16-16 Connectors for electronic equipment Tests and measurements Part 16-16: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16p: Torsional strength, fixed male tabs - Edition 1.0 7187 60512-16-17 Connectors for electronic equipment Tests and measurements Part 16-17: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16q: Tensile and compressive strength, fixed male tabs - Edition 1.0 7188 60512-16-18 Connectors for electronic equipment Tests and measurements Part 16-18: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16r: Deflection of contacts, simulation - Edition 1.0 7189 60512-16-2 Connectors for electronic equipment Tests and measurements Part 16-2: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16b: Restricted entry - Edition 1.0 7190 60512-16-3 Connectors for electronic equipment Tests and measurements Part 16-3: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16c: Contactbending strength - Edition 1.0 7191 60512-16-4 Connectors for electronic equipment Tests and measurements Part 16-4: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16d: Tensile strength (crimped connections) - Edition 1.0 7192 60512-16-5 Connectors for electronic equipment Tests and measurements Part 16-5: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16e: Gauge retention force (resilient contacts) - Edition 1.0 7193 60512-16-6 Connectors for electronic equipment Tests and measurements Part 16-6: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16f: Robustness of terminations - Edition 1.0 7194 60512-16-7 Connectors for electronic equipment Tests and measurements Part 16-7: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16g: Measurement of contact deformation after crimping - Edition 1.0 7195 60512-16-8 Connectors for electronic equipment Tests and measurements Part 16-8: Mechanical tests on connections and terminations 2008 IEC 0 Test 16h: Insulating grip effectiveness (crimped connections) - Edition 1.0 7196 60512-16-9 Connectors for electronic equipment Tests and measurements Part 16-9: Mechanical tests on contacts and terminations 2008 IEC 0 Test 16i: Grounding contact spring holding force - Edition 1.0 7197 60512-15-1 Connectors for electronic equipment Tests and measurements Part 15-1: Connector tests (mechanical) Test 15a: Contact 2008 IEC 0 retention in insert - Edition 1.0 7198 60512-15-2 Connectors for electronic equipment Tests and measurements Part 15-2: Connector tests (mechanical) Test 15b: Insert 2008 IEC 0 retention in housing (axial) - Edition 1.0 7199 60512-15-3 Connectors for electronic equipment Tests and measurements Part 15-3: Connector tests (mechanical) Test 15c: Insert 2008 IEC 0 retention in housing (torsional) - Edition 1.0 7200 60512-15-4 Connectors for electronic equipment Tests and measurements Part 15-4: Connector tests (mechanical) Test 15d: Contact 2008 IEC 0 insertion, release and extraction force - Edition 1.0 7201 60512-15-5 Connectors for electronic equipment Tests and measurements Part 15-5: Connector tests (mechanical) Test 15e: Contact 2008 IEC 0 retention in insert, cable nutation - Edition 1.0 7202 60512-15-6 Connectors for electronic equipment Tests and measurements Part 15-6: Connector tests (mechanical) Test 15f: 2008 IEC 0 Effectiveness of connector coupling devices - Edition 1.0 7203 60512-15-7 Connectors for electronic equipment Tests and measurements Part 15-7: Connector tests (mechanical) Test 15g: 2008 IEC 0 Robustness of protective cover attachment - Edition 1.0 7204 60601-2-29 Medical electrical equipment Part 2-29: Particular requirements for the basic safety and essential performance of 2008 IEC 0 radiotherapy simulators - Edition 3.0 7205 60598-2-22 Luminaires Part 2-22: Particular requirements Luminaires for emergency lighting - Edition 4.0 2008 IEC 0 7206 60598-1 Luminaires Part 1: General requirements and tests - Edition 8.0 2008 IEC 0 7207 60534-9 CORR Industrial-process control valves Part 9: Test procedure for response measurements from step inputs CORRIGENDUM 1 - 2008 IEC 0 1 Edition 1.0 7208 60539-1 Directly heated negative temperature coefficient thermistors Part 1: Generic specification - Edition 3.0 2008 IEC 0 7209 TS 62436 Guideline for implementation of copy controlled multimedia interface - Edition 1.1 2008 IEC 0 7210 TS 62492-1 Industrial process control devices Radiation thermometers Part 1: Technical data for radiation thermometers - Edition 1.0 2008 IEC 0 7211 TS 62500 Process management for avionics Defining and performing highly accelerated tests in aerospace systems Application 2008 IEC 0 guide - Edition 1.0 7212 TS 62538 Categorization of optical devices - Edition 1.0 2008 IEC 0 7213 TS 62351-2 Power systems management and associated information exchange Data and communications security Part 2: Glossary of 2008 IEC 0 terms - Edition 1.0 7214 TS 62371 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with 2008 IEC 0 rated voltages greater than 1000 V - Edition 1.0 7215 TS 62395-2 NULL 2008 IEC 0 7216 TS 62396-3 NULL 2008 IEC 0 7217 TS 62396-4 NULL 2008 IEC 0 7218 TS 62396-5 NULL 2008 IEC 0 7219 TS 62257-9-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-1: Integrated systems 2008 IEC 0 Micropower systems - Edition 2.0 7220 TS 62257-9-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-1: Integrated systems 2008 IEC 0 Micropower systems - Edition 2.0 7221 TS 62257-7 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7: Generators - Edition 1.0 2008 IEC 0 7222 TS 62257-7-3 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set 2008 IEC 0 Selection of generator sets for rural electrification systems - Edition 1.0 7223 TS 62312-1-1 Guideline for synchronization of audio and video Part 1-1: Measurement methods for synchronization of audio and video 2008 IEC 0 equipment and systems General - Edition 1.0 7224 TS 62271-304 High-voltage switchgear and controlgear Part 304: Design classes for indoor enclosed switchgear and controlgear for rated 2008 IEC 0 voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions - Edition 1.0 7225 TS 62257-9-6 Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-6: Integrated system 2008 IEC 0 Selection of Photovoltaic Individual Electrification Systems (PV-IES) - Edition 1.0 7226 TS 60695-1-20 NULL 2008 IEC 0 7227 TS 60519-5 Safety in electroheat installations Part 5: Specifications for safety in plasma installations - Edition 1.0 2008 IEC 0 7228 TS 60680 Test methods of plasma equipment for electroheat and electrochemical applications - Edition 1.0 2008 IEC 0 7229 TS 60695-11-11 Fire hazard testing Part 11-11: Test flames Determination of the characteristic heat flux for ignition from a non-contacting 2008 IEC 0 flame source - Edition 2.0 7230 TS 60695-8-3 NULL 2008 IEC 0 7231 TS 60815-1 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 1: Definitions, 2008 IEC 0 information and general principles - Edition 1.0 7232 TS 60815-2 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 2: Ceramic and glass 2008 IEC 0 insulators for a.c. systems - Edition 1.0 7233 TS 60815-3 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 3: Polymer insulators for 2008 IEC 0 a.c. systems - Edition 1.0 7234 TS 60034-18-42 NULL 2008 IEC 0 7235 TS 61251 NULL 2008 IEC 0 7236 TS 61000-1-2 NULL 2008 IEC 0 7237 TS 61850-80-1 Communication networks and systems for power utility automation Part 80-1: Guideline to exchanging information from a 2008 IEC 0 CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 - Edition 2.0 7238 TS 61994-4-3 Piezoelectric and dielectric devices for frequency control and selection Glossary Part 4-3: Materials Materials for 2008 IEC 0 dielectric devices - Edition 1.0 7239 TS 62046 Safety of machinery Application of protective equipment to detect the presence of persons - Edition 2.0 2008 IEC 0 7240 TR 62258-8 Semiconductor die products Part 8: EXPRESS model schema for data exchange - Edition 1.0 2008 IEC 0 7241 TR 62271-303 NULL 2008 IEC 0 7242 TR 62271-310 High-voltage switchgear and controlgear Part 310: Electrical endurance testing for circuit-breakers above a rated voltage of 2008 IEC 0 52 kV - Edition 2.0 7243 TR 62482 Electrical installations in ships Electromagnetic compatibility Optimising of cable installations on ships Testing method 2008 IEC 0 of routing distance - Edition 1.0 7244 TR 62513 Safety of machinery Guidelines for the use of communication systems in safety-related applications - Edition 1.0 2008 IEC 0 7245 TR 62510 Standardising the characteristics of electricity - Edition 1.0 2008 IEC 0 7246 TR 62572-2 Fibre optic active components and devices Reliability standards Part 2: Laser module degradation - Edition 1.0 2008 IEC 0 7247 TR 62002-3 Mobile and portable DVB-T/H radio access Part 3: Measurement Interface - Edition 1.0 2008 IEC 0 7248 TR 61641 Enclosed low-voltage switchgear and controlgear assemblies Guide for testing under conditions of arcing due to internal 2008 IEC 0 fault - Edition 3.0 7249 TR 61602 Connectors used in the field of audio, video and audiovisual engineering CORRIGENDUM 1 - Edition 1.0 2008 IEC 0 CORR 1 7250 TR 61258 Guidelines for the development and use of medical electrical equipment educational materials - Edition 2.0 2008 IEC 0 7251 TR 60695-1-21 NULL 2008 IEC 0 7252 TR 60695-8-2 NULL 2008 IEC 0 7253 TR 60825-3 Safety of laser products - Part 3: Guidance for laser displays and shows - Edition 2.0 2008 IEC 0 7254 TR 60755 General requirements for residual current operated protective devices - Edition 2.0 2008 IEC 0 7255 TR 61000-3-13 Electromagnetic compatibility (EMC) Part 3-13: Limits Assessment of emission limits for the connection of unbalanced 2008 IEC 0 installations to MV, HV and EHV power systems - Edition 1.0 7256 TR 61000-3-6 Electromagnetic compatibility (EMC) Part 3-6: Limits Assessment of emission limits for the connection of distorting 2008 IEC 0 installations to MV, HV and EHV power systems - Edition 2.0 7257 TR 61000-3-7 Electromagnetic compatibility (EMC) Part 3-7: Limits Assessment of emission limits for the connection of fluctuating 2008 IEC 0 installations to MV, HV and EHV power systems - Edition 2.0 7258 TR 60909-2 Short-circuit currents in three-phase a.c. systems Part 2: Data of electrical equipment for short-circuit current calculations - 2008 IEC 0 Edition 2.0 7259 TR 60977 Medical electrical equipment Medical electron accelerators Guidelines for functional performance characteristics - Edition 2008 IEC 0 2.0 7260 TR 60930 Guidelines for administrative, medical, and nursing staff concerned with the safe use of medical electrical equipment and 2008 IEC 0 medical electrical systems - Edition 2.0 7261 TR 60919-2 Performance of high-voltage direct current (HVDC) systems with linecommutated converters Part 2: Faults and switching 2008 IEC 0 - Edition 2.0 7262 PAS 62587 Method for measuring performance of portable household electric room air cleaners - Edition 1.0 2008 IEC 0 7263 PAS 62588 NULL 2008 IEC 0 7264 PAS 62593 Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulators in wireless communication and 2008 IEC 0 broadcasting systems - Edition 1.0 7265 PAS 62545 Environmental Information on Electrical and Electronic Equipment (EIEEE) - Edition 1.0 2008 IEC 0 7266 PAS 62559 NULL 2008 IEC 0 7267 PAS 62443-3 Security for industrial process measurement and control Network and system security - Edition 1.0 2008 IEC 0 7268 PAS 62443-3 NULL 2008 IEC 0 PDF 7269 IECEX 04A NULL 2008 IEC 0 7270 IECEE 03 NULL 2008 IEC 0 7271 IECEX 03A NULL 2008 IEC 0 7272 IECEX 01A NULL 2008 IEC 0 7273 IECQ 001002-4 NULL 2008 IEC 0 7274 IECQ 001002-5 NULL 2008 IEC 0 7275 KOCKGCAAA NULL 2008 IEC 0 AAAAAAA 7276 PAS 60539-1-1 Directly heated negative temperature coefficient thermistors Part 1-1: Blank detail specification Sensing application 2008 IEC 0 Assessment level EZ - Edition 1.0 7277 PAS 60704-2- Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-15: 2008 IEC 0 15 Particular requirements for household food waste disposers - Edition 1.0 7278 62127-2 CORR NULL 2008 IEC 0 1 7279 62116 Utility-interconnected photovoltaic inverters Test procedure of islanding prevention measures - Edition 2.0 2008 IEC 0 7280 62127-1 CORR NULL 2008 IEC 0 1 7281 62137-1-3 Surface mounting technology Environmental and endurance test methods for surface mount solder joint Part 1-3: Cyclic 2008 IEC 0 drop test - Edition 1.0 7282 62135-1 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation - Edition 2.0 2008 IEC 0 7283 62220-1-3 Medical electrical equipment Characteristics of digital X-ray imaging devices Part 1-3: Determination of the detective 2008 IEC 0 quantum efficiency Detectors used in dynamic imaging - Edition 1.0 7284 62153-4-9 Metallic communication cable test methods Part 4-9: Electromagnetic compatibility (EMC) Coupling attenuation of 2008 IEC 0 screened balanced cables, triaxial method - Edition 1.0 7285 62271-205 High-voltage switchgear and controlgear Part 205: Compact switchgear assemblies for rated voltages above 52 kV - 2008 IEC 0 Edition 1.0 7286 62288 Maritime navigation and radiocommunication equipment and systems Presentation of navigation-related information on 2008 IEC 0 shipborne navigational displays General requirements, methods of testing and required test results - Edition 2.0 7287 62236-1 Railway applications Electromagnetic compatibility Part 1: General - Edition 2.0 2008 IEC 0 7288 62236-2 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world - 2008 IEC 0 Edition 2.0 7289 62236-3-1 Railway applications Electromagnetic compatibility Part 3-1: Rolling stock Train and complete vehicle - Edition 2.0 2008 IEC 0 7290 62236-3-2 Railway applications Electromagnetic compatibility Part 3-2: Rolling stock Apparatus - Edition 2.0 2008 IEC 0 7291 62236-4 Railway applications Electromagnetic compatibility Part 4: Emission and immunity of the signalling and 2008 IEC 0 telecommunications apparatus - Edition 2.0 7292 62236-5 Railway applications Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations 2008 IEC 0 and apparatus - Edition 2.0 7293 62256 Hydraulic turbines, storage pumps and pump-turbines Rehabilitation and performance improvement - Edition 2.0 2008 IEC 0 7294 62360 Baseline specifications of satellite and terrestrial receivers for ISDB (Integrated Services Digital Broadcasting) - Edition 2.0 2008 IEC 0 7295 62363 Radiation protection instrumentation Portable photon contamination meters and monitors - Edition 1.0 2008 IEC 0 7296 62369-1 Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the 2008 IEC 0 frequency range 0 GHz to 300 GHz Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identifi 7297 62335 Circuit breakers Switched protective earth portable residual current devices for class I and battery powered vehicle 2008 IEC 0 applications - Edition 1.0 7298 62321 Electrotechnical products Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent 2008 IEC 0 chromium, polybrominated biphenyls, polybrominated diphenyl ethers) - Edition 1.0 7299 62320-2 Maritime navigation and radiocommunication equipment and systems Automatic identification system (AIS) Part 2: AIS 2008 IEC 0 AtoN Stations Operational and performance requirements, methods of testing and required test results - Edition 2.0 7300 62317-13 Ferrite cores Dimensions Part 13: PQ-cores for use in power supply applications - Edition 2.0 2008 IEC 0 7301 62317-14 Ferrite cores Dimensions Part 14: EFD-cores for use in power supply applications - Edition 1.0 2008 IEC 0 7302 62303 Radiation protection instrumentation Equipment for monitoring airborne tritium - Edition 1.0 2008 IEC 0 7303 62310-3 Static transfer systems (STS) Part 3: Method for specifying performance and test requirements - Edition 1.0 2008 IEC 0 7304 62428 Electric power engineering Modal components in three-phase a.c. systems Quantities and transformations - Edition 1.0 2008 IEC 0 7305 62424 Representation of process control engineering Requests in P&I diagrams and data exchange between P&ID tools 2008 IEC 0 and PCE-CAE tools - Edition 2.0 7306 62419 Control technology - Rules for the designation of measuring instruments - Edition 1.0 2008 IEC 0 7307 62420 Concentric lay stranded overhead electrical conductors containing one or more gap(s) - Edition 1.0 2008 IEC 0 7308 62379-2 Common control interface for networked digital audio and video products Part 2: Audio - Edition 1.0 2008 IEC 0 7309 62440 Electric cables with a rated voltage not exceeding 450/750 V Guide to use - Edition 1.0 2008 IEC 0 7310 62431 Reflectivity of electromagnetic wave absorbers in millimetre wave frequency Measurement methods - Edition 1.0 2008 IEC 0 7311 62433-2 EMC IC modelling Part 2: Models of integrated circuits for EMI behavioural simulation Conducted emissions modelling 2008 IEC 0 (ICEM-CE) - Edition 2.0 7312 62460 Temperature Electromotive force (EMF) tables for pure-element thermocouple combinations - Edition 1.0 2008 IEC 0 7313 62480 Multimedia home network Network interfaces for network adapter - Edition 1.0 2008 IEC 0 7314 62552 CORR 1 NULL 2008 IEC 0 7315 62535 Insulating liquids Test method for detection of potentially corrosive sulphur in used and unused insulating oil - Edition 1.0 2008 IEC 0 7316 62499 Railway applications Current collection systems Pantographs, testing methods for carbon contact strips - Edition 1.0 2008 IEC 0 7317 62503 Multimedia quality - Method of assessment of synchronization of audio and video - Edition 1.0 2008 IEC 0 7318 62491 Industrial systems, installations and equipment and industrial products Labelling of cables and cores - Edition 1.0 2008 IEC 0 7319 62496-1 Optical circuit boards Part 1: General - Edition 1.0 2008 IEC 0 7320 62494-1 Medical electrical equipment Exposure index of digital X-ray imaging systems Part 1: Definitions and requirements for 2008 IEC 0 general radiography - Edition 1.0 7321 GUIDE 112 Guide on the safety of multimedia equipment - Edition 4.0 2008 IEC 0 7322 CISPR-TR 16- NULL 2008 IEC 0 2-5 7323 CISPRTR 16-2- NULL 2008 IEC 0 5 7324 CISPR 25 Vehicles, boats and internal combustion engines Radio disturbance characteristics Limits and methods of measurement for 2008 IEC 0 the protection of on-board receivers - Edition 4.0 7325 CISPR 22 Information technology equipment Radio disturbance characteristics Limits and methods of measurement - Edition 6.0 2008 IEC 0 7326 CISPR 22 NULL 2008 IEC 0 (REDLINE) 7327 CISPR 22 NULL 2008 IEC 0 (REDLINE) A 7328 CISPR 14-2 Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 2: 2008 IEC 0 Immunity Product family standard - Edition 2.0 7329 80601-2-59 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening 2008 IEC 0 thermographs for human febrile temperature screening - Edition 1.0 7330 80000-13 Quantities and units Part 13: Information science and technology - Edition 1.0 2008 IEC 0 7331 80000-14 NULL 2008 IEC 0 7332 80000-6 Quantities and units Part 6: Electromagnetism - Edition 1.0 2008 IEC 0 7333 80416-1 Basic principles for graphical symbols for use on equipment Part 1: Creation of graphical symbols for registration - Edition 2008 IEC 0 2.0 7334 80601-2-58 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens 2008 IEC 0 removal devices and vitrectomy devices for ophthalmic surgery - Edition 2.1; Consolidated Reprint 7335 61857-1 Electrical insulation systems Procedures for thermal evaluation Part 1: General requirements Low-voltage - Edition 3.0 2008 IEC 0 7336 61857-22 Electrical insulation systems Procedures for thermal evaluation Part 22: Specific requirements for encapsulated-coil model 2008 IEC 0 Wire-wound electrical insulation system (EIS) - Edition 2.0 7337 61858 NULL 2008 IEC 0 7338 61883-8 Consumer audio/video equipment Digital interface Part 8: Transmission of ITU-R BT.601 style digital video data - 2008 IEC 0 Edition 1.1 Consolidated Reprint 7339 61883-1 Consumer audio/video equipment Digital interface Part 1: General - Edition 3.0 2008 IEC 0 7340 61935-2-20 Testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-20: Patch cords and work area cords 2008 IEC 0 Blank detail specification for class D applications - Edition 1.0 7341 61935-3 Testing of balanced and coaxial information technology cabling Part 3: Installed cabling as specified in ISO/IEC 15018 2008 IEC 0 and related standards - Edition 1.0 7342 61952 Insulators for overhead lines Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V 2008 IEC 0 Definitions, test methods and acceptance criteria - Edition 2.0 7343 61966-5 Multimedia systems and equipment Colour measurement and management Part 5: Equipment using plasma display panels 2008 IEC 0 - Edition 2.0 7344 61834-11 Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 2008 IEC 0 625-50, 1125-60 and 1250-50 systems) Part 11: HDV format for 1080i and 720p systems - Edition 1.0 7345 61810-1 Electromechanical elementary relays Part 1: General and safety requirements - Edition 4.0 2008 IEC 0 7346 62007-1 Semiconductor optoelectronic devices for fibre optic system applications Part 1: Specification template for essential ratings 2008 IEC 0 and characteristics - Edition 3.0 7347 62026-2 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 2: Actuator sensor interface (AS-i) - 2008 IEC 0 Edition 2.0 7348 62026-3 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 3: DeviceNet - Edition 3.0 2008 IEC 0 7349 62002-1 Mobile and portable DVB-T/H radio access Part 1: Interface specification - Edition 2.0 2008 IEC 0 7350 62002-1 CORR Mobile and portable DVB-T/H radio access Part 1: Interface specification - Edition 2.0 2008 IEC 0 1 7351 62002-2 Mobile and portable DVB-T/H radio access Part 2: Interface conformance testing - Edition 2.0 2008 IEC 0 7352 61984 Connectors Safety requirements and tests - Edition 2.0 2008 IEC 0 7353 61968-13 Application integration at electric utilities System interfaces for distribution management Part 13: CIM RDF Model 2008 IEC 0 exchange format for distribution - Edition 1.0 7354 61970-402 NULL 2008 IEC 0 7355 61970-403 NULL 2008 IEC 0 7356 61967-6 Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 6: Measurement of conducted 2008 IEC 0 emissions Magnetic probe method - Edition 1.1 Consolidated Reprint 7357 61970-453 Energy management system application program interface (EMS-API) Part 453: Diagram layout profile - Edition 2.0 2008 IEC 0 7358 62087 NULL 2008 IEC 0 7359 62055-52 Electricity metering Payment systems Part 52: Standard transfer specification (STS) Physical layer protocol for a twoway 2008 IEC 0 virtual token carrier for direct local connection - Edition 1.0 7360 62058-11 Electricity metering equipment (AC) Acceptance inspection Part 11: General acceptance inspection methods - Edition 1.0 2008 IEC 0 7361 62058-21 Electricity metering equipment (AC) Acceptance inspection Part 21: Particular requirements for electromechanical meters 2008 IEC 0 for active energy (classes 0,5, 1 and 2) - Edition 1.0 7362 62058-31 Electricity metering equipment (AC) Acceptance inspection Part 31: Particular requirements for static meters for active 2008 IEC 0 energy (classes 0,2 S, 0,5 S, 1 and 2) - Edition 1.0 7363 62059-31-1 Electricity metering equipment Dependability Part 31-1: Accelerated reliability testing Elevated temperature and 2008 IEC 0 humidity - Edition 1.0 7364 62059-31-1 CORRIGENDUM 1 Electricity metering equipment Dependability Part 31-1: Accelerated reliability testing Elevated 2008 IEC 0 CORR 1 temperature and humidity - Edition 1.0 7365 62024-1 High frequency inductive components Electrical characteristics and measuring methods Part 1: Nanohenry range chip 2008 IEC 0 inductor - Edition 2.0 7366 62024-1 CORR Corrigendum 1 High frequency inductive components Electrical characteristics and measuring methods Part 1: Nanohenry 2008 IEC 0 1 range chip inductor - Edition 2.0 7367 62024-2 High frequency inductive components Electrical characteristics and measuring methods Part 2: Rated current of inductors 2008 IEC 0 for DC to DC converters - Edition 1.0 7368 62047-4 Semiconductor devices Micro-electromechanical devices Part 4: Generic specification for MEMS - Edition 1.0 2008 IEC 0 7369 61753-085-2 Fibre optic interconnecting devices and passive components performance standard Part 085-2: Non-connectorized single- 2008 IEC 0 mode pigtailed CWDM devices for category C Controlled environment - Edition 1.0 7370 61753-084-2 Fibre optic interconnecting devices and passive components performance standard Part 084-2: Non connectorised single- 2008 IEC 0 CORR 1 mode 980/1550 nm WWDM devices for category C Controlled environment CORRIGENDUM 1 - Edition 1.0 7371 61753-082-2 Fibre optic interconnecting devices and passive components performance standard Part 082-2: Pigtailed single-mode fibre 2008 IEC 0 m WWDM devices for category C Controlled environment - Edition 1.0_خ optic 1,31/1,55 7372 61754-25 Fibre optic connector interfaces Part 25: Type RAO connector family - Edition 1.0 2008 IEC 0 7373 61754-7 NULL 2008 IEC 0 7374 61770 Electric appliances connected to the water mains Avoidance of backsiphonage and failure of hose-sets - Edition 2.1 2008 IEC 0 Consolidated Reprint 7375 61758-1 Fibre optic interconnecting devices and passive components Interface standard for closures Part 1: General and guidance - 2008 IEC 0 Edition 1.0 7376 61753-031-6 Fibre optic interconnecting devices and passive components Performance standard Part 031-6: Non-connectorized single- 2008 IEC 0 mode 1xN and 2xN non-wavelengthselective branching devices for Category O Uncontrolled environment - Edition 2.0 7377 61606-3 Audio and audiovisual equipment Digital audio parts Basic measurement methods of audio characteristics Part 3: 2008 IEC 0 Professional use - Edition 1.0 7378 61675-1 Radionuclide imaging devices Characteristics and test conditions Part 1: Positron emission tomographs - Edition 2.0 2008 IEC 0 7379 61643-12 Low-voltage surge protective devices Part 12: Surge protective devices connected to low-voltage power distribution 2008 IEC 0 systems Selection and application principles - Edition 2.0 7380 61646 Thin-film terrestrial photovoltaic (PV) modules Design qualification and type approval - Edition 2.0 2008 IEC 0 7381 61649 Weibull analysis - Edition 2.0 2008 IEC 0 7382 61496-3 Safety of machinery Electro-sensitive protective equipment Part 3: Particular requirements for Active Opto-electronic 2008 IEC 0 Protective Devices responsive to Diffuse Reflection (AOPDDR) - Edition 2.0 7383 61512-3 Batch control Part 3: General and site recipe models and representation - Edition 1.0 2008 IEC 0 7384 61355-1 Classification and designation of documents for plants, systems and equipment Part 1: Rules and classification tables - 2008 IEC 0 Edition 2.0 7385 61443 Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV) - Edition 1.1 Consolidated 2008 IEC 0 Reprint 7386 61467 Insulators for overhead lines Insulator strings and sets for lines with a nominal voltage greater than 1 000 V AC power arc 2008 IEC 0 tests - Edition 1.0 7387 61386-1 Conduit systems for cable management Part 1: General requirements - Edition 2.1; Consolidated Reprint 2008 IEC 0 7388 61400-25-4 Wind energy generation systems - Part 25-4: Communications for monitoring and control of wind power plants - Mapping 2008 IEC 0 to communication profile - Edition 2.0; 7389 61400-21 Wind turbines Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines - 2008 IEC 0 Edition 2.0 7390 61466-1 CORR NULL 2007 IEC 0 1 7391 61453 Nuclear instrumentation Scintillation gamma ray detector systems for the assay of radionuclides Calibration and routine 2007 IEC 0 tests - Edition 2.0 7392 61462 Composite hollow insulators Pressurized and unpressurized insulators for use in electrical equipment with rated voltage 2007 IEC 0 greater than 1 000 V Definitions, test methods, acceptance criteria and design recommendations - Edition 1.0 7393 61340-5-1 Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena General requirements - Edition 2.0 2007 IEC 0 7394 61482-1-2 Live working Protective clothing against the thermal hazards of an electric arc Part 1-2: Test methods Method 2: 2007 IEC 0 Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) - Edition 2.0 7395 61558-2-7 Safety of power transformers, power supplies, reactors and similar products Part 2-7: Particular requirements and tests for 2007 IEC 0 transformers and power supplies for toys - Edition 2.0 7396 61558-2-2 Safety of Power Transformers, Power Supply Units and Similar - Part 2-2: Particular Requirements for Control 2007 IEC 0 Transformers - Edition 2.0 7397 61557-12 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures Part 12: Performance measuring and monitoring devices (PMD) - Edition 1.0 7398 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures Part 2: Insulation resistance - Edition 2.0 7399 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures Part 3: Loop impedance - Edition 2.0 7400 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures Part 4: Resistance of earth connection and equipotential bonding - Edition 2.0 7401 61557-5 Electrical Safety in Low Voltage Distribution Systems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, 2007 IEC 0 Measuring or Monitoring of Protective Measures - Part 5: Resistance to Earth - Edition 2.0 7402 61557-6 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems - Edition 2. 7403 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures Part 7: Phase sequence - Edition 2.0 7404 61557-8 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems - Edition 3.0 7405 61557-8 CORR Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 1 or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems - Edition 3.0 7406 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring 2007 IEC 0 or monitoring of protective measures Part 1: General requirements - Edition 2.0 7407 61558-2-1 Safety of power transformers, power supplies, reactors and similar products Part 2-1: Particular requirements and tests for 2007 IEC 0 separating transformers and power supplies incorporating separating transformers for general applications - Edition 2.0 7408 61628-2 Corrugated pressboard and presspaper for electrical purposes Part 2: Methods of test - Edition 1.1 Consolidated Reprint 2007 IEC 0 7409 61753-021-2 Fibre Optic Interconnecting Devices and Passive Component Performance Standard - Part 021-2: Fibre Optic Connectors 2007 IEC 0 Terminated on Single-Mode Fibre for Category C - Controlled Environment - Edition 2.0 7410 61753-021-6 Fibre optic interconnecting devices and passive components performance standard Part 021-6: Grade B/2 single-mode 2007 IEC 0 fibre optic connectors for category O Uncontrolled environment - Edition 1.0 7411 61760-2 Surface mounting technology Part 2: Transportation and storage conditions of surface mounting devices (SMD) 2007 IEC 0 Application guide - Edition 2.0 7412 61753-1 Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for 2007 IEC 0 performance standards - Edition 1.0 7413 61753-1(2 NULL 2007 IEC 0 7414 61753-083-2 Fibre optic interconnecting devices and passive components performance standard Part 083-2: Non-connectorised single- 2007 IEC 0 mode fibre optic C-band/L-band WDM devices for category C Controlled environment - Edition 1.0 7415 61753-083-2(2 NULL 2007 IEC 0 7416 61753-084-2 Fibre optic interconnecting devices and passive components performance standard Part 084-2: Non connectorised single- 2007 IEC 0 mode 980/1550 nm WWDM devices for category C Controlled environment - Edition 1.0 7417 61753-084-2(2 NULL 2007 IEC 0 7418 62055-31 Electricity metering Payment systems Part 31: Particular requirements Static payment meters for active energy (classes 1 2007 IEC 0 CORR and 2) CORRIGENDUM 1 - Edition 1.0 7419 62055-41 Electricity metering Payment systems Part 41: Standard transfer specification (STS) Application layer protocol for one- 2007 IEC 0 way token carrier systems - Edition 2.0 7420 62025-1 High frequency inductive components Non-electrical characteristics and measuring methods Part 1: Fixed, surface 2007 IEC 0 mounted inductors for use in electronic and telecommunication equipment - Edition 2.0 7421 62056-46 Electricity metering Data exchange for meter reading, tariff and load control Part 46: Data link layer using HDLC protocol 2007 IEC 0 - Edition 1.1; Consolidated Reprint 7422 62055-51 Electricity metering Payment systems Part 51: Standard transfer specification (STS) Physical layer protocol for one-way 2007 IEC 0 numeric and magnetic card token carriers - Edition 1.0 7423 62091 Low-voltage switchgear and controlgear Controllers for drivers of stationary fire pumps - Edition 1.0 2007 IEC 0 7424 62108 Concentrator photovoltaic (CPV) modules and assemblies Design qualification and type approval - Edition 2.0 2007 IEC 0 7425 61968-4 Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records 2007 IEC 0 and asset management - Edition 1.0 7426 61970-404 NULL 2007 IEC 0 7427 61970-405 NULL 2007 IEC 0 7428 61970-407 NULL 2007 IEC 0 7429 61988-4 NULL 2007 IEC 0 7430 61996-2 Maritime navigation and radiocommunication equipment and systems Shipborne voyage data recorder (VDR) Part 2: 2007 IEC 0 Simplified voyage data recorder (S-VDR) Performance requirements, methods of testing and required test results - Edition 2.0 7431 62026-1 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 1: General rules - Edition 2.0 2007 IEC 0 7432 62021-2 Insulating liquids Determination of acidity Part 2: Colourimetric titration - Edition 1.0 2007 IEC 0 7433 62005-9-2 Reliability of fibre optic interconnecting devices and passive optical components Part 9-2: Reliability qualification for 2007 IEC 0 single fibre optic connector sets Single mode - Edition 1.0 7434 62004 Thermal-resistant aluminium alloy wire for overhead line conductor - Edition 1.0 2007 IEC 0 7435 61800-7-304 Adjustable speed electrical power drive systems Part 7-304: Generic interface and use of profiles for power drive systems 2007 IEC 0 Mapping of profile type 4 to network technologies - Edition 2.0 7436 61800-5-1 Adjustable speed electrical power drive systems Part 5-1: Safety requirements Electrical, thermal and energy - Edition 2.1; 2007 IEC 0 Consolidated Reprint 7437 61800-5-2 Adjustable speed electrical power drive systems Part 5-2: Safety requirements Functional - Edition 2.0 2007 IEC 0 7438 61800-7-1 Adjustable speed electrical power drive systems Part 7-1: Generic interface and use of profiles for power drive systems 2007 IEC 0 Interface definition - Edition 2.0 7439 61800-7-201 Adjustable speed electrical power drive systems Part 7-201: Generic interface and use of profiles for power drive systems 2007 IEC 0 Profile type 1 specification - Edition 2.0 7440 61800-7-202 Adjustable speed electrical power drive systems Part 7-202: Generic interface and use of profiles for power drive systems 2007 IEC 0 Profile type 2 specification - Edition 2.0 7441 61800-7-203 Adjustable speed electrical power drive systems Part 7-203: Generic interface and use of profiles for power drive systems 2007 IEC 0 Profile type 3 specification - Edition 2.0 7442 61800-7-204 Adjustable speed electrical power drive systems Part 7-204: Generic interface and use of profiles for power drive systems 2007 IEC 0 Profile type 4 specification - Edition 2.0 7443 61800-7-301 Adjustable speed electrical power drive systems Part 7-301: Generic interface and use of profiles for power drive systems 2007 IEC 0 Mapping of profile type 1 to network technologies - Edition 2.0 7444 61800-7-302 Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems 2007 IEC 0 - Mapping of profile type 2 to network technologies - Edition 2.0 7445 61800-7-303 Adjustable speed electrical power drive systems Part 7-303: Generic interface and use of profiles for power drive systems 2007 IEC 0 Mapping of profile type 3 to network technologies - Edition 2.0 7446 61966-2-5 Multimedia systems and equipment Colour measurement and management Part 2-5: Colour management Optional RGB 2007 IEC 0 colour space opRGB - Edition 1.0 7447 61950 Cable management systems Specifications for conduit fittings and accessories for cable installations for extra heavy duty 2007 IEC 0 electrical steel conduit - Edition 2.0 7448 61937-9 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 9: Non-linear PCM 2007 IEC 0 bitstreams according to the MAT format - Edition 1.0 7449 61937-3 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 3: Non-linear PCM 2007 IEC 0 bitstreams according to the AC-3 and enhanced AC-3 formats - Edition 2.0 7450 61915-1 Low-voltage switchgear and controlgear Device profiles for networked industrial devices Part 1: General rules for the 2007 IEC 0 development of device profiles - Edition 1.0 7451 61892-4 Mobile and fixed offshore units Electrical installations Part 4: Cables - Edition 1.0 2007 IEC 0 7452 61892-6 Mobile and fixed offshore units Electrical installations Part 6: Installation - Edition 3.0 2007 IEC 0 7453 61892-7 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas - Edition 3.0 2007 IEC 0 7454 61869-1 Instrument transformers Part 1: General requirements - Edition 1.0 2007 IEC 0 7455 CISPR.TR 16- NULL 2007 IEC 0 4-3 7456 CISPR.TR 16- NULL 2007 IEC 0 4-4 7457 CISPR-TR 16- NULL 2007 IEC 0 4-3 7458 CISPR-TR 16- NULL 2007 IEC 0 4-4 7459 GUIDE 115 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector - Edition 1.0 2007 IEC 0 7460 62481-2 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2: DLNA media formats - 2007 IEC 0 Edition 2.0 7461 62481-1 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1: Architecture and 2007 IEC 0 protocols - Edition 2.0 7462 62525 Standard Test Interface Language (STIL) for Digital Test Vector Data - Edition 1.0 2007 IEC 0 7463 62526 Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments - Edition 1.0 2007 IEC 0 7464 62527 Standard for Extensions to Standard Test Interface Language (STIL) for DC Level Specification - Edition 1.0 2007 IEC 0 7465 62528 Standard Testability Method for Embedded Core-based Integrated Circuits - Edition 1.0 2007 IEC 0 7466 62539 Guide for the statistical analysis of electrical insulation breakdown data - Edition 1.0 2007 IEC 0 7467 62552 NULL 2007 IEC 0 7468 62457 Multimedia home networks Home network communication protocol over IP for multimedia household appliances - Edition 2007 IEC 0 1.0 7469 62464-1 Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters - Edition 2007 IEC 0 1.0 7470 62447-1 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-12 Part 1: VTR 2007 IEC 0 specifications - Edition 1.0 7471 62447-2 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-12 Part 2: Compression 2007 IEC 0 format - Edition 1.0 7472 62447-3 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-12 Part 3: Data stream 2007 IEC 0 format - Edition 1.0 7473 62374 Semiconductor devices Time dependent dielectric breakdown (TDDB) test for gate dielectric films - Edition 1.0 2007 IEC 0 7474 62374(2 NULL 2007 IEC 0 7475 62379-1 Common control interface for networked digital audio and video products Part 1: General - Edition 1.0 2007 IEC 0 7476 62385 Nuclear power plants - Instrumentation and control important to safety - Methods for assessing the performance of safety 2007 IEC 0 system instrument channels - Edition 1.0 7477 62388 Maritime navigation and radiocommunication equipment and systems Shipborne radar Performance requirements, 2007 IEC 0 methods of testing and required test results - Edition 2.0 7478 62397 Nuclear power plants Instrumentation and control important to safety Resistance temperature detectors - Edition 1.0 2007 IEC 0 7479 62401 Radiation protection instrumentation Alarming personal radiation devices (PRD) for detection of illicit trafficking of 2007 IEC 0 radioactive material - Edition 1.0 7480 62401(2 NULL 2007 IEC 0 7481 62402 Obsolescence Management - Application Guide - Edition 1.0 2007 IEC 0 7482 62421 Electronics assembly technology - Electronic modules - Edition 1.0 2007 IEC 0 7483 62425 Railway applications Communication, signalling and processing systems Safety related electronic systems for signalling - 2007 IEC 0 Edition 1.0 7484 62427 Railway applications Compatibility between rolling stock and train detection systems - Edition 1.0 2007 IEC 0 7485 62429 Reliability growth Stress testing for early failures in unique complex systems - Edition 1.0 2007 IEC 0 7486 62302 Radiation protection instrumentation Equipment for sampling and monitoring radioactive noble gases - Edition 1.0 2007 IEC 0 7487 62295 Multimedia systems Common communication protocol for inter-connectivity on heterogeneous networks - Edition 1.0 2007 IEC 0 7488 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz 2007 IEC 0 300 GHz) - Edition 1.0 7489 62317-1 Ferrite cores Dimensions Part 1: General specification - Edition 1.0 2007 IEC 0 7490 62317-9 Ferrite cores Dimensions Part 9: Planar cores - Edition 1.1; Consolidated Reprint 2007 IEC 0 7491 62317-9(2 NULL 2007 IEC 0 7492 62340 Nuclear power plants Instrumentation and control systems important to safety Requirements for coping with common 2007 IEC 0 cause failure (CCF) - Edition 1.0 7493 62341-1-2 Organic light emitting diode (OLED) displays Part 1-2: Terminology and letter symbols - Edition 2.0 2007 IEC 0 7494 62342 Nuclear power plants Instrumentation and control systems important to safety Management of ageing - Edition 1.0 2007 IEC 0 7495 62343-1-2 Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized) - 2007 IEC 0 Edition 2.0 7496 62353 Medical electrical equipment Recurrent test and test after repair of medical electrical equipment - Edition 2.0 2007 IEC 0 7497 62366 NULL 2007 IEC 0 7498 62264-3 Enterprise-control system integration Part 3: Activity models of manufacturing operations management - Edition 2.0 2007 IEC 0 7499 62226-3-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current 2007 IEC 0 density and internal electric field induced in the human body Part 3-1: Exposure to electric fields Analytical and 2D numerical mode 7500 62271-209 High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated 2007 IEC 0 voltages above 52 kV Fluid-filled and extruded insulation cables Fluid-filled and dry-type cable-terminations - Edition 1.0 7501 62272-2 Digital radio mondiale (DRM) Part 2: Digital radio in the bands below 30 MHz Methods of measurement for DRM 2007 IEC 0 transmitters - Edition 1.0 7502 62272-2(2 NULL 2007 IEC 0 7503 62273-1 Methods of measurement for radio transmitters Part 1: Performance characteristics of terrestrial digital television 2007 IEC 0 transmitters - Edition 1.0 7504 62220-1-2 Medical electrical equipment Characteristics of digital X-ray imaging devices Part 1-2: Determination of the detective 2007 IEC 0 quantum efficiency Detectors used in mammography - Edition 1.0 7505 62132-3 Integrated circuits Measurement of electromagnetic immunity, 150 kHz to 1 GHz Part 3: Bulk current injection (BCI) 2007 IEC 0 method - Edition 1.0 7506 62135-2 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements - Edition 2.0 2007 IEC 0 7507 62137-1-1 Surface mounting technology Environmental and endurance test methods for surface mount solder joint Part 1-1: Pull 2007 IEC 0 strength test - Edition 1.0 7508 62137-1-2 Surface mounting technology Environmental and endurance test methods for surface mount solder joint Part 1-2: Shear 2007 IEC 0 strength test - Edition 1.0 7509 62127-1 Ultrasonics Hydrophones Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz - Edition 2007 IEC 0 1.1; Consolidated Reprint 7510 62127-2 Ultrasonics Hydrophones Part 2: Calibration for ultrasonic fields up to 40 MHz - Edition 1.1; Consolidated Reprint 2007 IEC 0 7511 IECEX 04 NULL 2007 IEC 0 7512 PAS 62515 Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems - 2007 IEC 0 Edition 1.0 7513 PAS 61910-1 NULL 2007 IEC 0 7514 PAS 62326-7-1 NULL 2007 IEC 0 7515 PAS 61249-3-1 NULL 2007 IEC 0 7516 PAS 61755-3- NULL 2007 IEC 0 31 7517 PAS 61755-3- NULL 2007 IEC 0 32 7518 TR 60068-3-12 Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder 2007 IEC 0 reflow temperature profile - Edition 2.0 7519 TR 60068-3- NULL 2007 IEC 0 12(2 7520 TR 60787 NULL 2007 IEC 0 7521 TR 60479-5 Effects of current on human beings and livestock Part 5: Touch voltage threshold values for physiological effects - Edition 2007 IEC 0 1.0; The contents of the corrigendum of July 2013 have been included in this copy. 7522 TR 60344 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires Application guide - 2007 IEC 0 Edition 3.0 7523 TR 60649 NULL 2007 IEC 0 7524 TR 61340-5-2 Electrostatics Part 5-2: Protection of electronic devices from electrostatic phenomena User guide - Edition 1.0 2007 IEC 0 7525 TR 61496-4 Safety of machinery Electro-sensitive protective equipment Part 4: Particular requirements for equipment using vision 2007 IEC 0 based protective devices (VBPD) - Edition 1.0 7526 TR 62036 Mineral insulating oils Oxidation stability test method based on differential scanning calorimetry (DSC) - Edition 1.0 2007 IEC 0 7527 TR 62039 Selection guide for polymeric materials for outdoor use under HV stress - Edition 1.0 2007 IEC 0 7528 TR 62039(2 NULL 2007 IEC 0 7529 TR 61912-1 Low-voltage switchgear and controlgear Overcurrent protective devices Part 1: Application of short-circuit ratings - 2007 IEC 0 Edition 1.0 7530 TR 61946 Mineral insulating oils Characterization of paraffinic/naphthenic nature Low temperature differential scanning calorimetry 2007 IEC 0 (DSC) test method - Edition 1.0 7531 TR 62469 Guidance for residual stress measurement of optical fibre - Edition 1.0 2007 IEC 0 7532 TR 62456 An electrochemical reference system for use in different solvent media The decamethylated ferricinium/ferrocene redox 2007 IEC 0 couple - Edition 1.0 7533 TR 62456(2 NULL 2007 IEC 0 7534 TR 62422 Environmental characterization of solid insulating materials - Edition 1.0 2007 IEC 0 7535 TR 62422(2 NULL 2007 IEC 0 7536 TR 62316 Guidance for the interpretation of OTDR backscattering traces - Edition 2.0 2007 IEC 0 7537 TR 62324 Single-Mode Optical Fibres - Raman Gain Efficency Measurement using Continuous Wave Method - Guidance - Edition 2007 IEC 0 2.0 7538 TR 62258-7 Semiconductor die products Part 7: XML schema for data exchange - Edition 1.0 2007 IEC 0 7539 TR 62125 Environmental statement specific to IEC TC 20 Electric cables - Edition 1.0 2007 IEC 0 7540 TR 62153-4-0 IEC/TR 62153-4-0 Edition 1.0 2007-11 Metallic communication cable test methods Part 4-0: Electromagnetic 2007 IEC 0 compatibility (EMC) Relationship between surface transfer impedance and screening attenuation, recommended limits - Edition 1.0 7541 TS 62257-12-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 12-1: Selection of lamps and 2007 IEC 0 lighting appliances for off-grid electricity systems - Edition 2.0 7542 TS 62257-12- NULL 2007 IEC 0 1(2 7543 TS 62228 Integrated circuits EMC evaluation of CAN transceivers - Edition 1.0 2007 IEC 0 7544 TS 62215-2 Integrated circuits Measurement of impulse immunity Part 2: Synchronous transient injection method - Edition 1.0 2007 IEC 0 7545 TS 62224 Multimedia home server systems Conceptual model for digital rights management - Edition 2.0 2007 IEC 0 7546 TS 61994-1 Piezoelectric and dielectric devices for frequency control and selection Glossary Part 1: Piezoelectric and dielectric 2007 IEC 0 resonators - Edition 2.0 7547 TS 61994-4-1 Piezoelectric and dielectric devices for frequency control and selection Glossary Part 4-1: Piezoelectric materials 2007 IEC 0 Synthetic quartz crystal - Edition 2.0 7548 TS 61949 Ultrasonics Field characterization In situ exposure estimation in finite-amplitude ultrasonic beams - Edition 1.0 2007 IEC 0 7549 TS 61201 Use of conventional touch voltage limits Application guide Use of conventional touch voltage limits Application guide - 2007 IEC 0 Edition 2.0 7550 TS 61836 Solar photovoltaic energy systems - Terms, definitions and symbols - Edition 3.0 2007 IEC 0 7551 TS 60034-25 Rotating electrical machines Part 25: AC electrical machines used in power drive systems Application guide - Edition 3.0 2007 IEC 0 7552 TS 60034-25(2 NULL 2007 IEC 0 7553 TS 60870-5-604 Telecontrol equipment and systems Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard - 2007 IEC 0 Edition 2.0 7554 TS 60479-2 Effects of current on human beings and livestock Part 2: Special aspects - Edition 3.0 2007 IEC 0 7555 TS 62257-8-1 Recommendations for small renewable energy and hybrid systems for rural electrification Part 8-1: Selection of batteries 2007 IEC 0 and battery management systems for stand-alone electrification systems Specific case of automotive flooded lead-acid batteries avail 7556 TS 62351-6 Power systems management and associated information exchange Data and communications security Part 6: Security for 2007 IEC 0 IEC 61850 - Edition 1.0 7557 TS 62312-2 Guideline for synchronization of audio and video Part 2: Methods for synchronization of audio and video systems - Edition 2007 IEC 0 1.0 7558 TS 62351-1 Power systems management and associated information exchange Data and communications security Part 1: 2007 IEC 0 Communication network and system security Introduction to security issues - Edition 1.0 7559 TS 62351-3 NULL 2007 IEC 0 7560 TS 62351-4 Power systems management and associated information exchange Data and communications security Part 4: Profiles 2007 IEC 0 including MMS - Edition 1.0 7561 TS 62351-4(2 NULL 2007 IEC 0 7562 TS 62404 Logic digital integrated circuits Specification for I/O interface model for integrated circuit (IMIC version 1.3) - Edition 1.0 2007 IEC 0 7563 TS 62454 Mechanical structures for electronic equipment Design guide: Interface dimensions and provisions for water cooling of 2007 IEC 0 electronic equipment within cabinets of the IEC 60297 and IEC 60917 series - Edition 1.0 7564 TS 62462 Ultrasonics Output test Guide for the maintenance of ultrasound physiotherapy systems - Edition 1.0 2007 IEC 0 7565 UA60747-9 NULL 2007 IEC 0 7566 60534-9 Industrial-process control valves Part 9: Test procedure for response measurements from step inputs - Edition 1.0 2007 IEC 0 7567 60529 CORR 2 Degrees of Protection Provided by Enclosures (IP Code) - Edition 2.2 Consolidated Reprint 2007 IEC 0 7568 60584-3 Thermocouples Part 3: Extension and compensating cables Tolerances and identification system - Edition 2.0 2007 IEC 0 7569 60587 Electrical insulating materials used under severe ambient conditions Test methods for evaluating resistance to tracking and 2007 IEC 0 erosion - Edition 3.0 7570 60599 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis - 2007 IEC 0 Edition 3.0 7571 60601-1-10 Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance Collateral 2007 IEC 0 Standard: Requirements for the development of physiologic closed-loop controllers - Edition 1.1 Consolidated Reprint 7572 60641-1 Specification for pressboard and presspaper for electrical purposes Part 1: Definitions and general requirements - Edition 2007 IEC 0 2.0 7573 60605-6 Equipment reliability testing Part 6: Tests for the validity and estimation of the constant failure rate and constant failure 2007 IEC 0 intensity - Edition 3.0 7574 60601-1-2 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance Collateral 2007 IEC 0 Standard: Electromagnetic disturbances Requirements and tests - Edition 4.0 7575 60601-1-9 Medical electrical equipment Part 1-9: General requirements for basic safety and essential performance Collateral 2007 IEC 0 Standard: Requirements for environmentally conscious design - Edition 1.1 Consolidated Reprint 7576 60601-2-37 Medical electrical equipment Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic 2007 IEC 0 medical diagnostic and monitoring equipment - Edition 2.1; Consolidated Reprint 7577 60601-2-39 Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal 2007 IEC 0 dialysis equipment - Edition 2.0 7578 60454-3-11 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 11: Polyester 2007 IEC 0 film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive - Ed 7579 60454-3-4 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 4: Cellulose 2007 IEC 0 paper, creped and non-creped, with rubber thermosetting adhesive - Edition 3.0 7580 60454-2 Pressure-sensitive adhesive tapes for electrical purposes Part 2: Methods of test - Edition 3.0; Includes Corrigendum: 2007 IEC 0 12/2009 7581 60450 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating 2007 IEC 0 materials - Edition 2.1 Consolidated Reprint 7582 60444-9 Measurement of quartz crystal unit parameters Part 9: Measurement of spurious resonances of piezoelectric crystal units - 2007 IEC 0 Edition 1.0 7583 60426 Electrical insulating materials Determination of electrolytic corrosion caused by insulating materials Test methods - 2007 IEC 0 Edition 2.0 7584 60519-11 Safety in electroheat installations Part 11: Particular requirements for installations using the effect of electromagnetic 2007 IEC 0 forces on liquid metals - Edition 2.0 7585 60515 Nuclear power plants Instrumentation important to safety Radiation detectors Characteristics and test methods - Edition 2007 IEC 0 2.0 7586 60384-18 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface 2007 IEC 0 mount capacitors with solid (MnO2) and non-solid electrolyte - Edition 3.0 7587 60371-3-9 AMENDMENT 1 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 9: Moulding 2007 IEC 0 AMD 1 micanite - Edition 1.0 7588 60371-3-9 NULL 2007 IEC 0 AMD 1(2 7589 60371-3-8 AMENDMENT 1 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 8: Mica paper 2007 IEC 0 AMD 1 tapes for flamme-resistant security cables - Edition 1.0 7590 60371-3-8 NULL 2007 IEC 0 AMD 1(2 7591 60364-7-729 Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or 2007 IEC 0 maintenance gangways - Edition 1.0 7592 60364-7-721 Low-voltage electrical installations Part 7-721: Requirements for special installations or locations Electrical installations 2007 IEC 0 in caravans and motor caravans - Edition 1.0 7593 60364-7-721(2 NULL 2007 IEC 0 7594 60364-7-708 Low-voltage electrical installations Part 7-708: Requirements for special installations or locations Caravan parks, camping 2007 IEC 0 parks and similar locations - Edition 3.0 7595 60364-4-44 Low-voltage electrical installations Part 4-44: Protection for safety Protection against voltage disturbances and 2007 IEC 0 electromagnetic disturbances - Edition 2.1 Consolidated Reprint 7596 60384-18-1 Fixed capacitors for use in electronic equipment Part 18-1: Blank detail specification Fixed aluminium electrolytic surface 2007 IEC 0 mount capacitors with solid (MnO2) electrolyte Assessment level EZ - Edition 2.0 7597 60384-18-2 Fixed capacitors for use in electronic equipment Part 18-2: Blank detail specification Fixed aluminium electrolytic surface 2007 IEC 0 mount capacitors with non-solid electrolyte Assessment level EZ - Edition 2.0 7598 60384-4 Fixed capacitors for use in electronic equipment Part 4: Sectional specification Fixed aluminium electrolytic capacitors 2007 IEC 0 with solid (MnO2) and non-solid electrolyte - Edition 5.0 7599 60384-4-1 Fixed capacitors for use in electronic equipment Part 4-1: Blank detail specification Fixed aluminium electrolytic 2007 IEC 0 capacitors with non-solid electrolyte Assessment level EZ - Edition 3.0 7600 60384-4-2 Fixed capacitors for use in electronic equipment Part 4-2: Blank detail specification Fixed aluminium electrolytic 2007 IEC 0 capacitors with solid (MnO2) electrolyte Assessment level EZ - Edition 2.0 7601 60384-4-2(2 NULL 2007 IEC 0 7602 60404-8-6 Magnetic materials Part 8-6: Specifications for individual materials - Soft magnetic metallic materials - Edition 3.0 2007 IEC 0 7603 60404-5 AMD NULL 2007 IEC 0 1 7604 60423 Conduit systems for cable management Outside diameters of conduits for electrical installations and threads for conduits 2007 IEC 0 and fittings - Edition 3.0 7605 60412 Nuclear instrumentation Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions 2007 IEC 0 of scintillators - Edition 3.0 7606 60318-6 Electroacoustics Simulators of human head and ear Part 6: Mechanical coupler for the measurement of bone vibrators - 2007 IEC 0 Edition 1.0 7607 60320-1 Appliance couplers for household and similar general purposes Part 1: General requirements - Edition 3.0 2007 IEC 0 7608 60335-2-106 Household and similar electrical appliances Safety Part 2-106: Particular requirements for heated carpets and for heating 2007 IEC 0 units for room heating installed under removable floor coverings - Edition 1.0 7609 60317-28 AMD NULL 2007 IEC 0 2 7610 60317-55 Specifications for particular types of winding wires Part 55: Solderable polyurethane enamelled round copper wire 2007 IEC 0 overcoated with polyamide, class 180 - Edition 2.0 7611 60061-1 AMD Amendment 39 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2007 IEC 0 39 caps - Edition 3.35 7612 60061-1 AMD NULL 2007 IEC 0 39(2 7613 60061-2 AMD Amendment 36 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2007 IEC 0 36 Lampholders - Edition 3.32 7614 60050-221 International Electrotechnical Vocabulary - Chapter 221: Magnetic Materials and Components - Edition 1.0 2007 IEC 0 AMD 3 7615 60050-221 NULL 2007 IEC 0 AMD 3(2 7616 60050-471 International Electrotechnical Vocabulary Part 471: Insulators - Edition 2.0 2007 IEC 0 7617 60050-411 Amendment 1 International Electrotechnical Vocabulary Part 411: Rotating machinery - Edition 2.0 2007 IEC 0 AMD 1 7618 60050-394 NULL 2007 IEC 0 7619 60050-102 International Electrotechnical Vocabulary Part 102: Mathematics General concepts and linear algebra - Edition 1.0 2007 IEC 0 7620 60034-9 Rotating Electrical Machines - Part 9: Noise Limits - Edition 4.1 Consolidated Reprint 2007 IEC 0 7621 60034-8 Rotating electrical machines Part 8: Terminal markings and direction of rotation - Edition 3.1 Consolidated Reprint 2007 IEC 0 7622 60034-2-1 Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding 2007 IEC 0 machines for traction vehicles) - Edition 2.0 7623 60034-3 Rotating electrical machines Part 3: Specific requirements for synchronous generators driven by steam turbines or 2007 IEC 0 combustion gas turbines - Edition 6.0 7624 60034-12 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors - Edition 3.0 2007 IEC 0 7625 60034-14 Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher 2007 IEC 0 Measurement, evaluation and limits of vibration severity - Edition 3.1 Consolidated Reprint 7626 60079-30-2 Explosive atmospheres Part 30-2: Electrical resistance trace heating Application guide for design, installation and 2007 IEC 0 maintenance - Edition 1.0 7627 60079-5 Explosive atmospheres - Part 5: Equipment protection by powder filling â__qâ__ - Edition 4.0 2007 IEC 0 7628 60079-6 Explosive atmospheres Part 6: Equipment protection by liquid immersion "o" - Edition 4.0 2007 IEC 0 7629 60086-4 Primary batteries Part 4: Safety of lithium batteries - Edition 4.0 2007 IEC 0 7630 60085 Electrical insulation Thermal evaluation and designation - Edition 4.0 2007 IEC 0 7631 60092-503 Electrical installations in ships Part 503: Special features AC supply systems with voltages in the range of above 1 kV up 2007 IEC 0 to and including 15 kV - Edition 2.0 7632 60092-501 Electrical installations in ships Part 501: Special features Electric propulsion plant - Edition 5.0 2007 IEC 0 7633 60079-29-1 Explosive atmospheres Part 29-1: Gas detectors Performance requirements of detectors for flammable gases - Edition 2.0 2007 IEC 0 7634 60079-29-2 Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable 2007 IEC 0 gases and oxygen - Edition 2.0 7635 60079-30-1 Explosive atmospheres Part 30-1: Electrical resistance trace heating General and testing requirements - Edition 1.0 2007 IEC 0 Edition 6.0 2007 IEC 0 - «آp»آ Explosive atmospheres Part 2: Equipment protection by pressurized enclosure 60079-2 7636 7637 60076-6 Power transformers Part 6: Reactors - Edition 1.0 2007 IEC 0 7638 60079-1 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures â__dâ__ - Edition 7.0 2007 IEC 0 7639 60079-1(2 NULL 2007 IEC 0 7640 60079-14 Explosive atmospheres Part 14: Electrical installations design, selection and erection - Edition 5.0 2007 IEC 0 7641 60079-17 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance - Edition 5.0 2007 IEC 0 7642 60068-2-82 Environmental testing Part 2-82: Tests Test Tx: Whisker test methods for electronic and electric components - Edition 1.0; 2007 IEC 0 The contents of the corrigendum of December 2009 have been included 7643 60068-2-69 Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by 2007 IEC 0 the wetting balance (force measurement) method - Edition 3.0 7644 60068-3-11 Environmental testing Part 3-11: Supporting documentation and guidance Calculation of uncertainty of conditions in 2007 IEC 0 climatic test chambers - Edition 1.0 7645 60064 AMD 4 Tungsten filament lamps for domestic and similar general lighting purposes Performance requirements - Edition 6.3 2007 IEC 0 Consolidated Reprint 7646 60068-2-1 Environmental testing Part 2-1: Tests Test A: Cold - Edition 6.0 2007 IEC 0 7647 60068-2-2 Environmental testing Part 2-2: Tests Test B: Dry heat - Edition 5.0 2007 IEC 0 7648 60068-2-6 Environmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) - Edition 7.0 2007 IEC 0 7649 60191-2 AMD Amendment 16 Mechanical Standardization of Semiconductor Devices - Part 2: Dimensions - Edition 1.0 2007 IEC 0 16 7650 60189-1 Low-frequency cables and wires with PVC insulation and PVC sheath Part 1: General test and measuring methods - 2007 IEC 0 Edition 3.0 7651 60189-2 Low-frequency cables and wires with PVC insulation and PVC sheath Part 2: Cables in pairs, triples, quads and quintuples 2007 IEC 0 for inside installations - Edition 4.0 7652 60189-3 Low-frequency cables and wires with PVC insulation and PVC sheath Part 3: Equipment wires with solid or stranded 2007 IEC 0 conductor wires, PVC insulated, in singles, pairs and triples - Edition 4.0 7653 60191-6-16 Mechanical standardization of semiconductor devices Part 6-16: Glossary of semiconductor tests and burn-in sockets for 2007 IEC 0 BGA, LGA, FBGA and FLGA - Edition 1.0 7654 60191-6-16(2 NULL 2007 IEC 0 7655 60191-6-13 Mechanical standardization of semiconductor devices Part 6-13: Design guideline of open-top-type sockets for Fine-pitch 2007 IEC 0 Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA) - Edition 2.0 7656 60191-1 Mechanical standardization of semiconductor devices Part 1: General rules for the preparation of outline drawings of 2007 IEC 0 discrete devices - Edition 2.0 7657 60191-1(2 NULL 2007 IEC 0 7658 60268-5 Sound System Equipment - Part 5: Loudspeakers - Edition 3.1 Consolidated Reprint 2007 IEC 0 7659 60317-0-6 Specifications for particular types of winding wires Part 0-6: General requirements Glass-fibre wound resin or varnish 2007 IEC 0 impregnated, bare or enamelled round copper wire - Edition 1.1; Consolidated Reprint 7660 60287-3-3 Electric cables Calculation of the current rating Part 3-3: Sections on operating conditions Cables crossing external heat 2007 IEC 0 sources - Edition 1.0 7661 60300-3-4 Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability 2007 IEC 0 Requirements - Edition 2.0 7662 60227-1 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 1: General requirements - Edition 2007 IEC 0 3.0 7663 60229 Electric cables Tests on extruded oversheaths with a special protective function - Edition 3.0 2007 IEC 0 7664 60255-27 NULL 2007 IEC 0 CORR 7665 60825-1 Safety of laser products Part 1: Equipment classification and requirements - Edition 3.0 2007 IEC 0 7666 60850 Railway applications Supply voltages of traction systems - Edition 4.0 2007 IEC 0 7667 60846-2 Radiation protection instrumentation Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X 2007 IEC 0 and gamma radiation Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protection p 7668 60947-5-5 NULL 2007 IEC 0 CORR 1 7669 60947-6-2 Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment Control and protective switching devices 2007 IEC 0 (or equipment) (CPS) - Edition 2.1 Consolidated Reprint 7670 60947-6-2(2 NULL 2007 IEC 0 7671 60976 Medical electrical equipment Medical electron accelerators Functional performance characteristics - Edition 2.0 2007 IEC 0 7672 60974-10 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements - Edition 3.0 2007 IEC 0 7673 60974-3 Arc welding equipment Part 3: Arc striking and stabilizing devices - Edition 3.0 2007 IEC 0 7674 60970 Insulating liquids Methods for counting and sizing particles - Edition 2.0 2007 IEC 0 7675 60884-2-4 Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirements for plugs and socket-outlets 2007 IEC 0 for SELV - Edition 3.0 7676 60874-19-3 Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 19-3: Fibre optic 2007 IEC 0 adaptor (duplex) type SC for multimode fibre connectors Detail specification - Edition 2.0 7677 60874-19-1 Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 19-1: Fibre optic 2007 IEC 0 patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b Detail specification - Edi 7678 60904-2 Photovoltaic devices Part 2: Requirements for photovoltaic reference devices - Edition 3.0 2007 IEC 0 7679 60901 AMD 4 AMENDMENT 4 Single-capped fluorescent lamps Performance specifications - Edition 2.0 2007 IEC 0 7680 60915 CORR 1 Fixed capacitors for use in electronic equipment Preferred dimensions of shaft ends, bushes and for the mounting of single- 2007 IEC 0 hole, bush-mounted, shaft-operated electronic components - Edition 2.0 7681 60927 AMENDMENT 1 Auxiliaries for lamps Starting devices (other than glow starters) Performance requirements - Edition 3.1 2007 IEC 0 Consolidated Reprint 7682 60904-9 Photovoltaic devices Part 9: Solar simulator performance requirements - Edition 2.0 2007 IEC 0 7683 60747-9 Semiconductor devices Discrete devices Part 9: Insulated-gate bipolar transistors (IGBTs) - edition 2.0 2007 IEC 0 7684 60747-4 Semiconductor devices Discrete devices Part 4: Microwave diodes and transistors - Edition 2.1; Consolidated Reprint 2007 IEC 0 7685 60747-16-1 Semiconductor devices Part 16-1: Microwave integrated circuits Amplifiers - Edition 1.2; Consolidated Reprint 2007 IEC 0 7686 60730-2-6 Automatic electrical controls for household and similar use Part 2-6: Particular requirements for automatic electrical 2007 IEC 0 pressure sensing controls including mechanical requirements - Edition 3.0 7687 60730-2-17 Automatic electrical controls for household and similar use Part 2-17: Particular requirements for electrically operated gas 2007 IEC 0 valves, including mechanical requirements - Edition 1.2 7688 60730-2-19 Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oil 2007 IEC 0 valves, including mechanical requirements - Edition 1.2 Consolidated Reprint 7689 60763-2 Specification for laminated pressboard Part 2: Methods of test - Edition 2.0 2007 IEC 0 7690 60793-1-48 Optical fibres Part 1-48: Measurement methods and test procedures - Polarization mode dispersion - Edition 2.0 2007 IEC 0 7691 60793-2-20 Optical fibres Part 2-20: Product specifications Sectional specification for category A2 multimode fibres - Edition 3.0 2007 IEC 0 7692 60706-5 Maintainability of equipment Part 5: Testability and diagnostic testing - Edition 2.0 2007 IEC 0 7693 60728-1 Cable networks for television signals, sound signals and interactive services Part 1: System performance of forward paths - 2007 IEC 0 Edition 5.0 7694 60728-4 Cable networks for television signals, sound signals and interactive services Part 4: Passive wideband equipment for 2007 IEC 0 coaxial cable networks - Edition 3.0 7695 60728-5 Cable networks for television signals, sound signals and interactive services Part 5: Headend equipment - Edition 3.0 2007 IEC 0 7696 60671 Nuclear power plants Instrumentation and control systems important to safety Surveillance testing - Edition 2.0 2007 IEC 0 7697 60669-1 Switches for household and similar fixed electrical installations Part 1: General requirements - Edition 4.0 2007 IEC 0 7698 60664-1 Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests - Edition 2.0 2007 IEC 0 7699 60664-1(2 NULL 2007 IEC 0 7700 60664-5 NULL 2007 IEC 0 7701 60645-3 Electroacoustics Audiometric equipment Part 3: Test signals of short duration - Edition 2.0 2007 IEC 0 7702 60645-3(2 NULL 2007 IEC 0 7703 60641-3-2 Specification for pressboard and presspaper for electrical purposes Part 3: Specifications for individual materials Sheet 2: 2007 IEC 0 Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 - Edition 2.0 7704 60684-3-211 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 211: Heatshrinkable sleeving, 2007 IEC 0 semi-rigid polyolefin, shrink ratio 2:1 - Edition 3.0 7705 60684-3-246 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 246: Heatshrinkable polyolefin 2007 IEC 0 sleeving, dual wall, non-flame retarded - Edition 3.0 7706 60684-3-248 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 248: General purpose, heat- 2007 IEC 0 shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 - Edition 1.0 7707 60679-1 Quartz crystal controlled oscillators of assessed quality Part 1: Generic specification - Edition 3.0 2007 IEC 0 7708 60679-1(2 NULL 2007 IEC 0 7709 61223-3-2 Evaluation and routine testing in medical imaging departments Part 3-2: Acceptance tests Imaging performance of 2007 IEC 0 mammographic X-ray equipment - Edition 2.0 7710 61189-3 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 3: Test 2007 IEC 0 methods for interconnection structures (printed boards) - Edition 2.0 7711 61190-1-2 Attachment materials for electronic assembly Part 1-2: Requirements for soldering pastes for high-quality interconnects in 2007 IEC 0 electronics assembly - Edition 3.0 7712 61192-5 Workmanship requirements for soldered electronic assemblies Part 5: Rework, modification and repair of soldered 2007 IEC 0 electronic assemblies - Edition 1.0 7713 61196-1-1 Coaxial communication cables Part 1-1: Capability approval for coaxial cables - Edition 1.0 2007 IEC 0 7714 61193-2 Quality assessment systems Part 2: Selection and use of sampling plans for inspection of electronic components and 2007 IEC 0 packages - Edition 1.0 7715 61196-1-203 Coaxial communication cables Part 1-203: Environmental test methods Test for water penetration of cable - Edition 1.0 2007 IEC 0 7716 61196-1-203(2 NULL 2007 IEC 0 7717 61188-5-3 Printed boards and printed board assemblies Design and use Part 5-3: Attachment (land/joint) considerations Components 2007 IEC 0 with gull-wing leads on two sides - Edition 1.0 7718 61188-5-4 Printed boards and printed board assemblies Design and use Part 5-4: Attachment (land/joint) considerations Components 2007 IEC 0 with J leads on two sides - Edition 1.0 7719 61188-5-5 Printed boards and printed board assemblies Design and use Part 5-5: Attachment (land/joint) considerations Components 2007 IEC 0 with gull-wing leads on four sides - Edition 1.0 7720 61188-5-8 Printed board and printed board assemblies Design and use Part 5-8: Attachment (land/joint) considerations Area array 2007 IEC 0 components (BGA, FBGA, CGA, LGA) - Edition 1.0 7721 61169-8 Radio-frequency connectors Part 8: Sectional specification RF coaxial connectors with inner diameter of outer conductor 2007 IEC 0 type BNC) - Edition 1.0) _خ mm (0,256 in) with bayonet lock Characteristic impedance 50 6,5 7722 61169-2 Radio-frequency connectors Part 2: Sectional specification Radio frequency coaxial connectors of type 9,52 - Edition 2.0 2007 IEC 0 7723 61169-37 Radio-frequency connectors Part 37: Sectional specification STWX8 R.F. connectors - Edition 1.0 2007 IEC 0 7724 61300-2-51 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-51: Tests 2007 IEC 0 Fibre optic connector test for transmission with applied tensile load Singlemode and multimode - Edition 1.0 7725 61300-2-49 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-49: Tests 2007 IEC 0 Connector installation test - Edition 1.0 7726 61300-2-50 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-50: Tests 2007 IEC 0 Fibre optic connector proof test with static load Singlemode and multimode - Edition 1.0 7727 61300-3-42 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-42: 2007 IEC 0 Examinations and measurements Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves - Edition 1.0 7728 61318 Live working Conformity assessment applicable to tools, devices and equipment - Edition 3.0 2007 IEC 0 7729 61310-1 Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tactile signals - 2007 IEC 0 Edition 2.0 7730 61310-2 Safety of machinery Indication, marking and actuation Part 2: Requirements for marking - Edition 2.0 2007 IEC 0 7731 61310-3 Safety of machinery Indication, marking and actuation Part 3: Requirements for the location and operation of actuators - 2007 IEC 0 Edition 2.0 7732 61290-10-4 Optical amplifiers Test methods Part 10-4: Multichannel parameters Interpolated source subtraction method using an 2007 IEC 0 optical spectrum analyzer - Edition 1.0 7733 61290-10-2 Optical Amplifiers - Test Methods - Part 10-2: Multichannel Parameters - Pulse Method Using a Gated Optical Spectrum 2007 IEC 0 Analyzer - Edition 2.0 7734 61300-2-22 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests 2007 IEC 0 Change of temperature - Edition 2.0 7735 61290-7-1 Optical amplifiers Test methods Part 7-1: Out-of-band insertion losses Filtered optical power meter method - Edition 2.0 2007 IEC 0 7736 61071 Capacitors for power electronics - Edition 1.0 2007 IEC 0 7737 61051-1 Varistors for use in electronic equipment Part 1: Generic specification - edition 2.0 2007 IEC 0 7738 61023 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment 2007 IEC 0 (SDME) - Performance requirements, methods of testing and required test results - Edition 3.0 7739 61158-6-4 Industrial communication networks Fieldbus specifications Part 6-4: Application layer protocol specification Type 4 2007 IEC 0 elements - Edition 2.0 7740 61158-6-5 Industrial communication networks Fieldbus specifications Part 6-5: Application layer protocol specification Type 5 2007 IEC 0 elements - Edition 2.0 7741 61158-6-7 Industrial communication networks Fieldbus specifications Part 6-7: Application layer protocol specification Type 7 2007 IEC 0 elements - Edition 1.0 7742 61158-6-8 Industrial communication networks Fieldbus specifications Part 6-8: Application layer protocol specification Type 8 2007 IEC 0 elements - Edition 1.0 7743 61158-5-4 Industrial communication networks Fieldbus specifications Part 5-4: Application layer service definition Type 4 elements 2007 IEC 0 - Edition 2.0 7744 61158-5-5 Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 2007 IEC 0 elements - Edition 2.0 7745 61158-5-5 PDF NULL 2007 IEC 0 7746 61158-5-7 Industrial communication networks Fieldbus specifications Part 5-7: Application layer service definition Type 7 elements 2007 IEC 0 - Edition 1.0 7747 61158-5-8 Industrial communication networks Fieldbus specifications Part 5-8: Application layer service definition Type 8 elements 2007 IEC 0 - Edition 1.0 7748 61158-5-9 Industrial communication networks Fieldbus specifications Part 5-9: Application layer service definition Type 9 elements 2007 IEC 0 - Edition 2.0 7749 61158-6-11 Industrial communication networks Fieldbus specifications Part 6-11: Application layer protocol specification Type 11 2007 IEC 0 elements - Edition 1.0 7750 61158-6-13 Industrial communication networks Fieldbus specifications Part 6-13: Application layer protocol specification Type 13 2007 IEC 0 elements - Edition 2.0 7751 61158-6-16 Industrial communication networks Fieldbus specifications Part 6-16: Application layer protocol specification Type 16 2007 IEC 0 elements - Edition 1.0 7752 61158-6-17 Industrial communication networks Fieldbus specifications Part 6-17: Application layer protocol specification Type 17 2007 IEC 0 elements - Edition 1.0 7753 61158-3-1 Industrial communication networks Fieldbus specifications Part 3-1: Data-link layer service definition Type 1 elements - 2007 IEC 0 Edition 2.0 7754 61158-3-11 Industrial communication networks Fieldbus specifications Part 3-11: Data-link layer service definition Type 11 elements 2007 IEC 0 - Edition 1.0 7755 61158-3-13 Industrial communication networks Fieldbus specifications Part 3-13: Data-link layer service definition Type 13 elements 2007 IEC 0 - Edition 2.0 7756 61158-3-16 Industrial communication networks Fieldbus specifications Part 3-16: Data-link layer service definition Type 16 elements 2007 IEC 0 - Edition 1.0 7757 61158-3-17 Industrial communication networks Fieldbus specifications Part 3-17: Data-link layer service definition Type 17 elements 2007 IEC 0 - Edition 1.0 7758 61158-3-18 Industrial communication networks Fieldbus specifications Part 3-18: Data-link layer service definition Type 18 elements 2007 IEC 0 - Edition 1.0 7759 61158-3-2 Industrial communication networks Fieldbus specifications Part 3-2: Data-link layer service definition Type 2 elements - 2007 IEC 0 Edition 2.0 7760 61158-3-3 Industrial communication networks Fieldbus specifications Part 3-3: Data-link layer service definition Type 3 elements - 2007 IEC 0 Edition 2.0 7761 61158-3-4 Industrial communication networks Fieldbus specifications Part 3-4: Data-link layer service definition Type 4 elements - 2007 IEC 0 Edition 2.0 7762 61158-3-7 Industrial communication networks Fieldbus specifications Part 3-7: Data-link layer service definition Type 7 elements - 2007 IEC 0 Edition 1.0 7763 61158-3-8 Industrial communication networks Fieldbus specifications Part 3-8: Data-link layer service definition Type 8 elements - 2007 IEC 0 Edition 1.0 7764 61158-4-1 Industrial communication networks Fieldbus specifications Part 4-1: Data-link layer protocol specification Type 1 2007 IEC 0 elements - Edition 2.0 7765 61158-4-13 Industrial communication networks Fieldbus specifications Part 4-13: Data-link layer protocol specification Type 13 2007 IEC 0 elements - Edition 2.0 7766 61158-4-16 Industrial communication networks Fieldbus specifications Part 4-16: Data-link layer protocol specification Type 16 2007 IEC 0 elements - Edition 1.0 7767 61158-4-17 Industrial communication networks Fieldbus specifications Part 4-17: Data-link layer protocol specification Type 17 2007 IEC 0 elements - Edition 1.0 7768 61158-4-4 Industrial communication networks Fieldbus specifications Part 4-4: Data-link layer protocol specification Type 4 2007 IEC 0 elements - Edition 2.0 7769 61158-4-7 Industrial communication networks Fieldbus specifications Part 4-7: Data-link layer protocol specification Type 7 2007 IEC 0 elements - Edition 1.0 7770 61158-4-8 Industrial communication networks Fieldbus specifications Part 4-8: Data-link layer protocol specification Type 8 2007 IEC 0 elements - Edition 1.0 7771 61158-5-11 Industrial communication networks Fieldbus specifications Part 5-11: Application layer service definition Type 11 2007 IEC 0 elements - Edition 1.0 7772 61158-5-13 Industrial communication networks Fieldbus specifications Part 5-13: Application layer service definition Type 13 2007 IEC 0 elements - Edition 2.0 7773 61158-5-16 Industrial communication networks Fieldbus specifications Part 5-16: Application layer service definition Type 16 2007 IEC 0 elements - Edition 1.0 7774 61158-5-17 Industrial communication networks Fieldbus specifications Part 5-17: Application layer service definition Type 17 2007 IEC 0 elements - Edition 1.0 7775 61097-1 Global maritime distress and safety system (GMDSS) Part 1: Radar transponder Marine search and rescue (SART) 2007 IEC 0 Operational and performance requirements, methods of testing and required test results - Edition 2.0 7776 61138 Cables for Portable Earthing and Short-Circuiting Equipment - Edition 3.0 2007 IEC 0 7777 61131-2 Programmable controllers Part 2: Equipment requirements and tests - Edition 3.0 2007 IEC 0 7778 61133 Railway applications Rolling stock Testing of rolling stock on completion of construction and before entry into service - 2006 IEC 0 Edition 3.0 7779 61078 Reliability block diagrams - Edition 3.0 2006 IEC 0 7780 61082-1 Preparation of documents used in electrotechnology - Part 1: Rules - Edition 3.0 2006 IEC 0 7781 61076-7-100 Connectors for electronic equipment Product requirements Part 7-100: Cable outlet accessories Detail specification for a 2006 IEC 0 metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system - 7782 61076-3-112 Connectors for electronic equipment Part 3-112: Rectangular connectors Detail specification for rectangular connectors 2006 IEC 0 with four contacts for high performance serial bus for consumer audio/video equipment - Edition 1.0 7783 61165 Application of Markov Techniques - Edition 2.0 2006 IEC 0 7784 61025 Fault Tree Analysis (FTA) - Edition 2.0 2006 IEC 0 7785 61034-2 CORR NULL 2006 IEC 0 1 7786 61048 Auxiliaries for lamps Capacitors for use in tubular fluorescent and other discharge lamp circuits General and safety 2006 IEC 0 requirements - Edition 2.1; Consolidated Reprint 7787 61076-1 Connectors for electronic equipment Product requirements Part 1: Generic specification - Edition 2.0 2006 IEC 0 7788 61076-3-104 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, 2006 IEC 0 shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz - Edition 3.0 7789 61076-3-106 Connectors for electronic equipment Product requirements Part 3-106: Rectangular connectors Detail specification for 2006 IEC 0 protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 ser 7790 61061-1 Non-impregnated densified laminated wood for electrical purposes Part 1: Definitions, designation and general 2006 IEC 0 requirements - Edition 3.0 7791 61066 NULL 2006 IEC 0 7792 61010-2-020(2 NULL 2006 IEC 0 7793 61010-2-020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular 2006 IEC 0 requirements for laboratory centrifuges - Edition 3.0 7794 61000-4-12 Electromagnetic Compatibility (EMC) Part 4-12: Testing and Measurement Techniques - Oscillatory Waves Immunity Test 2006 IEC 0 - Edition 2.0 7795 61000-4-1 NULL 2006 IEC 0 7796 61300-2-26 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt 2006 IEC 0 mist - Edition 2.0 7797 61300-2-37 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-37: Tests 2006 IEC 0 Cable bending for fibre optic closures - Edition 3.0 7798 61290-1-1 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method - Edition 3.0 2006 IEC 0 7799 61290-5-1 Optical amplifiers Test methods Part 5-1: Reflectance parameters Optical spectrum analyzer method - Edition 2.0 2006 IEC 0 7800 61280-2-11 Fibre optic communication subsystem test procedures Part 2-11: Digital systems Averaged Q-factor determination using 2006 IEC 0 amplitude histogram evaluation for optical signal quality monitoring - Edition 1.0 7801 61280-4-4 Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion 2006 IEC 0 measurement for installed links - Edition 2.0 7802 61300-3-32 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-32: 2006 IEC 0 Examinations and measurements Polarization mode dispersion measurement for passive optical components - Edition 1.0 7803 61300-3-24 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-24: 2006 IEC 0 Examinations and measurements Keying accuracy of optical connectors for polarization maintaining fibre - Edition 2.0 7804 61300-2-38 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - 2006 IEC 0 Sealing for pressurized closures of fibre optic devices - Edition 2.0 7805 61300-2-46 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests 2006 IEC 0 Damp heat, cyclic - Edition 1.0 7806 61300-3-15 NULL 2006 IEC 0 7807 61300-3-14 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-14: 2006 IEC 0 Examinations and measurements Error and repeatability of the attenuation settings of a variable optical attenuator - Edition 3.0 7808 61163-1 Reliability stress screening Part 1: Repairable assemblies manufactured in lots - Edition 2.0 2006 IEC 0 7809 61169-16 Radio-frequency connectors Part 16: Sectional specification RF coaxial connectors with inner diameter of outer conductor 2006 IEC 0 7 mm (0,276 in) with screw coupling Characteristics impedance 50 . (75 .) (type N) - Edition 1.0 7810 61189-2 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2: Test 2006 IEC 0 methods for materials for interconnection structures - Edition 2.0 7811 61182-2 Printed board assembly products Manufacturing description data and transfer methodology Part 2: Generic requirements - 2006 IEC 0 Edition 1.0 7812 61196-1-112 Coaxial communication cables Part 1-112: Electrical test methods Test for return loss (uniformity of impedance) - Edition 2006 IEC 0 1.0 7813 61196-1-115 Coaxial communication cables Part 1-115: Electrical test methods Test for regularity of impedance (pulse/step function 2006 IEC 0 return loss) - Edition 1.0 7814 61196-1-122 Coaxial communication cables Part 1-122: Electrical test methods Test for cross-talk between coaxial cables - Edition 1.0 2006 IEC 0 7815 61189-6 Test methods for electrical materials, interconnection structures and assemblies Part 6: Test methods for materials used in 2006 IEC 0 manufacturing electronic assemblies - Edition 1.0 7816 61189-5 Test methods for electrical materials, interconnection structures and assemblies Part 5: Test methods for printed board 2006 IEC 0 assemblies - Edition 1.0 7817 61223-3-5 Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance of 2006 IEC 0 CORR 1 computed tomography X-ray equipment CORRIGENDUM 1 - Edition 1.0 7818 61223-2-6 Evaluation and routine testing in medical imaging departments Part 2-6: Constancy tests Imaging performance of 2006 IEC 0 computed tomography X-ray equipment - Edition 2.0 7819 61212-3-3 Insulating materials Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes 2006 IEC 0 Part 3: Specifications for individual materials Sheet 3: Round laminated moulded rods - Edition 2.0 7820 61212-1 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - 2006 IEC 0 Part 1: Definitions, designations and general requirements - Edition 2.0 7821 61212-1 CORR Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 1: General 2006 IEC 0 1 Requirements - Edition 2.0 7822 61212-2 Insulating materials Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes 2006 IEC 0 Part 2: Methods of test - Edition 2.0 7823 61204-7 Low-voltage switch mode power supplies Part 7: Safety requirements - Edition 2.0 2006 IEC 0 7824 61196-1-317 Coaxial communication cables Part 1-317: Mechanical test methods Test for crush resistance of cable - Edition 1.0 2006 IEC 0 7825 61196-1-314 Coaxial communication cables - Part 1- 314: Mechanical test methods - Test for bending - Edition 2.0 2006 IEC 0 7826 61196-1-324 Coaxial communication cables Part 1-324: Mechanical test methods Test for abrasion resistance of cable - Edition 1.0 2006 IEC 0 7827 60684-3-233 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 233: Heat-Shrinkable 2006 IEC 0 Fluoroelastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1 - Edition 2.0 7828 60691 AMD 1 NULL 2006 IEC 0 7829 60661 Methods for measuring the performance of electric household coffee makers - Edition 2.2 Consolidated Reprint 2006 IEC 0 7830 60669-2-2 Switches for household and similar fixed electrical installations Part 2-2: Particular requirements Electromagnetic remote- 2006 IEC 0 control switches (RCS) - Edition 3.0 7831 60669-2-3 Switches for household and similar fixed electrical installations Part 2-3: Particular requirements Time delay switches 2006 IEC 0 (TDS) - Edition 3.0 7832 60670-23 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular 2006 IEC 0 requirements for floor boxes and enclosures - Edition 1.1 Consolidated Reprint 7833 60670-23(2 NULL 2006 IEC 0 7834 60704-3 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 3: Procedure 2006 IEC 0 for determining and verifying declared noise emission values - Edition 2.0 7835 60706-2 Maintainability of equipment Part 2: Maintainability requirements and studies during the design and development phase - 2006 IEC 0 Edition 2.0 7836 60706-3 Maintainability of equipment Part 3: Verification and collection, analysis and presentation of data - Edition 2.0 2006 IEC 0 7837 60695-11-2 NULL 2006 IEC 0 CORR 1 7838 60695-10-2 NULL 2006 IEC 0 CORR 1 7839 60770-3 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent 2006 IEC 0 transmitters - Edition 2.0 7840 60793-1-34 Optical fibres Part 1-34: Measurement methods and test procedures Fibre curl - Edition 2.0 2006 IEC 0 7841 60749-35 Semiconductor devices Mechanical and climatic test methods Part 35: Acoustic microscopy for plastic encapsulated 2006 IEC 0 electronic components - Edition 1.0 7842 60749-39 Semiconductor devices Mechanical and climatic test methods Part 39: Measurement of moisture diffusivity and water 2006 IEC 0 solubility in organic materials used for semiconductor components - Edition 1.0 7843 60748-4-3 Semiconductor devices Integrated circuits Part 4-3: Interface integrated circuits Dynamic criteria for analogue-digital 2006 IEC 0 converters (ADC) - Edition 1.0 7844 60745-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements - Edition 4.0 2006 IEC 0 7845 60730-2-10 Automatic electrical controls for household and similar use Part 2-10: Particular requirements for motor-starting relays - 2006 IEC 0 Edition 2.0 7846 60730-2-11 Automatic electrical controls for household and similar use Part 2-11: Particular requirements for energy regulators - 2006 IEC 0 Edition 2.0 7847 60730-2-13 Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing 2006 IEC 0 controls - Edition 2.0 7848 60730-2-3 Automatic electrical controls for household and similar use Part 2-3: Particular requirements for thermal protectors for 2006 IEC 0 ballasts for tubular fluorescent lamps - Edition 2.0 7849 60730-2-4 NULL 2006 IEC 0 7850 60747-5-4 Semiconductor devices Discrete devices Part 5-4: Optoelectronic devices Semiconductor lasers - Edition 1.0 2006 IEC 0 7851 60938-1 Fixed inductors for electromagnetic interference suppression Part 1: Generic specification - Edition 2.1 Consolidated 2006 IEC 0 Reprint 7852 60938-2 Fixed inductors for electromagnetic interference suppression Part 2: Sectional specification - Edition 2.1 Consolidated 2006 IEC 0 Reprint 7853 60921 Ballasts for tubular fluorescent lamps Performance requirements - Edition 2.1 Consolidated Reprint 2006 IEC 0 7854 60923 Auxiliaries for lamps Ballasts for discharge lamps (excluding tubular fluorescent lamps) Performance requirements - 2006 IEC 0 Edition 3.1 Consolidated Reprint 7855 60917-2-3 Modular order for the development of mechanical structures for electronic equipment practices Part 2-3: Sectional 2006 IEC 0 specification Interface co-ordination dimensions for the 25 mm equipment practice Extended detail specification Dimensions for subracks, 7856 60915 Fixed capacitors for use in electronic equipment Preferred dimensions of shaft ends, bushes for the mounting of single-hole, 2006 IEC 0 bush-mounted, shaft-operated electronic components - Edition 2.0 7857 60904-1 Photovoltaic Devices Part 1: Measurement of Photovoltaic Current-Voltage Characteristics - Edition 2.0 2006 IEC 0 7858 60880 Nuclear power plants Instrumentation and control systems important to safety Software aspects for computer-based 2006 IEC 0 systems performing category A functions - Edition 2.0 7859 60884-2-1 Plugs and socket-outlets for household and similar purposes Part 2-1: Particular requirements for fused plugs - Edition 2.0 2006 IEC 0 7860 60884-2-2 Plugs and socket-outlets for household and similar purposes Part 2-2: Particular requirements for socket-outlets for 2006 IEC 0 appliances - Edition 2.0 7861 60884-2-3 Plugs and socket-outlets for household and similar purposes Part 2-3: Particular requirements for switched socket-outlets 2006 IEC 0 without interlock for fixed installations - Edition 2.0 7862 60998-2-3 Connecting devices for low-voltage circuits for household and similar purposes Part 2-3: Particular requirements for 2006 IEC 0 CORR 1 connecting devices as separate entities with insulation-piercing clamping units CORRIGENDUM 1 - Edition 2.0 7863 60947-5-8 Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements Three-position enabling 2006 IEC 0 switches - Edition 1.0 7864 60947-5-9 Low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements Flow rate switches - 2006 IEC 0 Edition 1.0 7865 60861 Equipment for monitoring of radionuclides in liquid effluents and surface waters - Edition 2.0 2006 IEC 0 7866 60861(2 NULL 2006 IEC 0 7867 60870-5-104 Telecontrol equipment and systems Part 5-104: Transmission protocols Network access for IEC 60870-5-101 using 2006 IEC 0 standard transport profiles - Edition 2.1; Consolidated Reprint 7868 60870-5-6 Telecontrol equipment and systems Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards 2006 IEC 0 - Edition 1.0 7869 60794-4-10 Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines - Edition 2006 IEC 0 2.0 7870 60793-1-49 Optical fibres Part 1-49: Measurement methods and test procedures Differential mode delay - Edition 2.0 2006 IEC 0 7871 60794-5 Optical fibre cables Part 5: Sectional specification Microduct cabling for installation by blowing - Edition 2.0 2006 IEC 0 7872 60812 Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA) - Edition 2.0 2006 IEC 0 7873 60216-3 Electrical insulating materials Thermal endurance properties Part 3: Instructions for calculating thermal endurance 2006 IEC 0 characteristics - Edition 2.0; Includes Access to Additional Content 7874 60216-4-1 Electrical insulating materials Thermal endurance properties Part 4-1: Ageing ovens Single-chamber ovens - Edition 4.0 2006 IEC 0 7875 60216-6 Electrical insulating materials Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and 2006 IEC 0 RTE) of an insulating material using the fixed time frame method - Edition 2.0; Includes Access to Additional Content 7876 60194 Printed board design, manufacture and assembly - Terms and definitions - Edition 6.0 2006 IEC 0 7877 60297-3-104 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3- 2006 IEC 0 104: Connector dependent interface dimensions of subracks and plug-in units - Edition 1.0 7878 60317-0-4 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish 2006 IEC 0 impregnated, bare or enamelled rectangular copper wire - Edition 3.0 7879 60317-0-5 Specifications for Particular Types of Winding Wires - Part 0-5: General Requirements - Glass-Fibre Braided Resin or 2006 IEC 0 Varnish Impregnated, Bare or Enamelled Rectangular Copper Wire - Edition 2.0 7880 60287-1-1 Electric cables Calculation of the current rating Part 1-1: Current rating equations (100 % load factor) and calculation of 2006 IEC 0 losses General - Edition 2.1 Consolidated Reprint 7881 60287-2-1 Electric cables Calculation of the current rating Part 2-1: Thermal resistance Calculation of thermal resistance - Edition 2006 IEC 0 2.0 7882 60118-4 Electroacoustics Hearing aids Part 4: Induction-loop systems for hearing aid purposes System performance requirements - 2006 IEC 0 Edition 3.0 7883 60127-1 Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links - Edition 2.2 2006 IEC 0 Consolidated Reprint 7884 60095-1 Lead-acid starter batteries Part 1: General requirements and methods of test - Edition 7.0 2006 IEC 0 7885 60191-2 AMD Amendment 12 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2006 IEC 0 12 7886 60191-2 AMD Amendment 13 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2006 IEC 0 13 7887 60191-2 AMD Amendment 14 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2006 IEC 0 14 7888 60191-2 AMD Amendment 15 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2006 IEC 0 15 7889 60068-2-21 Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devices - Edition 6.0 2006 IEC 0 7890 60068-2-54 NULL 2006 IEC 0 7891 60060-3 High-Voltage Test Techniques Part 3: Definitions and requirements for on-site testing - Edition 1.0 2006 IEC 0 7892 60061-4 AMD Amendment 10 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2006 IEC 0 10 Lampholders - Edition 1.9 7893 60076-13 Power transformers Part 13: Self-protected liquid-filled transformers - Edition 1.0 2006 IEC 0 7894 60076-5 Power Transformers Part 5: Ability to Withstand Short Circuit - Edition 3.0 2006 IEC 0 7895 60079-26 Explosive atmospheres Part 26: Equipment with Equipment Protection Level (EPL) Ga - Edition 3.0 2006 IEC 0 7896 60079-26(2 NULL 2006 IEC 0 7897 60079-28 Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation - Edition 2.0 2006 IEC 0 7898 60079-28(2 NULL 2006 IEC 0 7899 60079-7 Explosive atmospheres - Part 7: Equipment protection by increased safety "e" - Edition 5.0 2006 IEC 0 7900 60027-4 Letter symbols to be used in electrical technology Part 4: Rotating electric machines - Edition 2.0 2006 IEC 0 7901 60027-4(2 NULL 2006 IEC 0 7902 60027-6 Letter symbols to be used in electrical technology Part 6: Control technology - Edition 1.0 2006 IEC 0 7903 60034-26 Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction 2006 IEC 0 motors - Edition 1.0 7904 60034-27 NULL 2006 IEC 0 7905 60034-5 Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines 2006 IEC 0 (IP code) Classification - Edition 4.1 Consolidated Reprint 7906 60050-351 International electrotechnical vocabulary - Part 351: Control technology - Edition 4.0 2006 IEC 0 7907 60061-2 AMD Amendment 34 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2006 IEC 0 34 Lampholders - Edition 3.32 7908 60061-2 AMD Amendment 35 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2006 IEC 0 35 Lampholders - Edition 3.32 7909 60061-1 AMD Amendment 37 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2006 IEC 0 37 Lampholders - Edition 3.35 7910 60061-1 AMD Amendment 38 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp 2006 IEC 0 38 caps - Edition 3.35 7911 60318-5 Electroacoustics Simulators of human head and ear Part 5: 2 cm3 coupler for the measurement of hearing aids and 2006 IEC 0 earphones coupled to the ear by means of ear inserts - Edition 1.0 7912 60384-3-1 Fixed capacitors for use in electronic equipment Part 3-1: Blank detail specification: Surface mount fixed tantalum 2006 IEC 0 electrolytic capacitors with manganese dioxide solid electrolyte Assessment level EZ - Edition 2.0 7913 60384-24 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface 2006 IEC 0 mount capacitors with conductive polymer solid electrolyte - Edition 2.0 7914 60384-24-1 Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification Surface mount fixed tantalum 2006 IEC 0 electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ - Edition 1.0 7915 60384-25 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface 2006 IEC 0 mount capacitors with conductive polymer solid electrolyte - Edition 2.0 7916 60384-25-1 Fixed capacitors for use in electronic equipment Part 25-1: Blank detail specification Surface mount fixed aluminium 2006 IEC 0 electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ - Edition 1.0 7917 60384-3 Fixed capacitors for use in electronic equipment Part 3: Sectional specification Surface mount fixed tantalum electrolytic 2006 IEC 0 capacitors with solid (MnO2) electrolyte - Edition 4.0 7918 60384-19 Fixed capacitors for use in electronic equipment Part 19: Sectional specification: Fixed metallized polyethylene- 2006 IEC 0 terephthalate film dielectric surface mount d.c. capacitors - Edition 3.0 7919 60384-19-1 Fixed capacitors for use in electronic equipment Part 19-1: Blank detail specification Fixed metallized polyethylene- 2006 IEC 0 terephthalate film dielectric surface mount d.c. capacitors Assessment level EZ - Edition 2.0 7920 60336 CORR 1 Medical electrical equipment - X-ray tube assemblies for medical diagnosis Characteristics of focal spots 2006 IEC 0 CORRIGENDUM 1 - Edition 4.0 7921 60357 AMD 1 Amendement 1 Tungsten halogen lamps (non-vehicle) Performance specifications - Edition 3.0 2006 IEC 0 7922 60352-2 Solderless connections Part 2: Crimped connections General requirements, test methods and practical guidance - Edition 2006 IEC 0 2.1 Consolidated Reprint 7923 60364-7-705 Low-voltage electrical installations Part 7-705: Requirements for special installations or locations Agricultural and 2006 IEC 0 horticultural premises - Edition 2.0 7924 60364-6 Low-voltage electrical installations Part 6: Verification - Edition 2.0 2006 IEC 0 7925 60364-7-701 Low-voltage electrical installations Part 7-701: Requirements for special installations or locations Locations containing a 2006 IEC 0 bath or shower - Edition 2.0 7926 60371-3-6 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed 2006 IEC 0 AMD 1 Mica Paper with a B-Stage Epoxy Resin Binder - Edition 1.0; Includes Amendment 1: 9/2006 7927 60371-3-7 Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 7: Polyester Film Mica Paper 2006 IEC 0 AMD 1 with an Epoxy Resin Binder for Single Conductor Taping - Edition 1.0; Includes Corrigendum 1: 08/1995 and Amendment 1: 9/2006 7928 60371-3-1 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator 2006 IEC 0 separators and materials - Edition 3.0 7929 60384-13-1 Fixed capacitors for use in electronic equipment Part 13-1: Blank detail specification Fixed polypropylene film dielectric 2006 IEC 0 metal foil d.c. capacitors Assessment level E - Edition 2.0 7930 60519-4 Safety in electroheating installations Part 4: Particular requirements for arc furnace installations - Edition 4.0 2006 IEC 0 7931 60519-2 Safety in electroheat installations Part 2: Particular requirements for resistance heating equipment - Edition 3.0 2006 IEC 0 7932 60512-12-1 Connectors for electronic equipment Tests and measurements Part 12-1: Soldering tests Test 12a: Solderability, wetting, 2006 IEC 0 solder bath method - Edition 1.0;: 1984 7933 60512-12-2 Connectors for electronic equipment Tests and measurements Part 12-2: Soldering tests Test 12b: Solderability, wetting, 2006 IEC 0 soldering iron method - Edition 1.0 7934 60512-12-3 Connectors for electronic equipment Tests and measurements Part 12-3: Soldering tests Test 12c: Solderability, de- 2006 IEC 0 wetting - Edition 1.0 7935 60512-12-4 Connectors for electronic equipment Tests and measurements Part 12-4: Soldering tests Test 12d: Resistance to soldering 2006 IEC 0 heat, solder bath method - Edition 1.0 7936 60512-12-5 Connectors for electronic equipment Tests and measurements Part 12-5: Soldering tests Test 12e: Resistance to soldering 2006 IEC 0 heat, soldering iron method - Edition 1.0 7937 60512-13-1 Connectors for electronic equipment Tests and measurements Part 13-1: Mechanical operation tests Test 13a: Engaging 2006 IEC 0 and separating forces - Edition 2.0 7938 60512-13-2 Connectors for electronic equipment Tests and measurements Part 13-2: Mechanical operation tests Test 13b: Insertion 2006 IEC 0 and withdrawal forces - Edition 1.0 7939 60512-13-5 Connectors for electronic equipment Tests and measurements Part 13-5: Mechanical operation tests Test 13e: Polarizing 2006 IEC 0 and keying method - Edition 1.0 7940 60512-14-2 Connectors for electronic equipment Tests and measurements Part 14-2: Sealing tests Test 14b: Sealing Fine air leakage - 2006 IEC 0 Edition 1.0 7941 60512-14-4 Connectors for electronic equipment Tests and measurements Part 14-4: Sealing tests Test 14d: Immersion Waterproof - 2006 IEC 0 Edition 1.0 7942 60512-14-5 Connectors for electronic equipment Tests and measurements Part 14-5: Sealing tests Test 14e: Immersion at low air 2006 IEC 0 pressure - Edition 1.0 7943 60512-14-6 Connectors for electronic equipment Tests and measurements Part 14-6: Sealing tests Test 14f: Interfacial sealing - 2006 IEC 0 Edition 1.0 7944 60454-3-2 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 2: 2006 IEC 0 Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives - Edition 3.0 7945 60455-3-5 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 5: 2006 IEC 0 Unsaturated polyester based impregnating resins - Edition 3.0 7946 60454-3-12 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: 2006 IEC 0 Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive - Edition 2.0 7947 60454-3-8 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven 2006 IEC 0 fabric tapes with pressuresensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre - Edition 3.0 7948 60464-2 AMD NULL 2006 IEC 0 1 7949 60464-2(2 NULL 2006 IEC 0 7950 60464-1 AMD NULL 2006 IEC 0 1 7951 60534-8-4 NULL 2006 IEC 0 CORR 1 7952 60534-4 Industrial-Process Control Valves - Part 4: Inspection and Routine Testing - Edition 3.0 2006 IEC 0 7953 60568 Nuclear power plants Instrumentation important to safety In-core instrumentation for neutron fluence rate (flux) 2006 IEC 0 measurements in power reactors - Edition 2.0 7954 60565 Underwater acoustics Hydrophones Calibration in the frequency range 0,01 Hz to 1 MHz - Edition 2.0 2006 IEC 0 7955 60556 Gyromagnetic materials intended for application at microwave frequencies Measuring methods for properties - Edition 2.1; 2006 IEC 0 Consolidated Reprint 7956 TS 62306 Ultrasonics Field characterisation Test objects for determining temperature elevation in diagnostic ultrasound fields - 2006 IEC 0 Edition 1.0 7957 TS 62257-9-2 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-2: Integrated systems 2006 IEC 0 Microgrids - Edition 2.0 7958 TS 62257-9-3 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-3: Integrated systems User 2006 IEC 0 interface - Edition 2.0 7959 TS 62257-9-4 Recommendations for renewable energy and hybrid systems for rural electrification Part 9-4: Integrated systems User 2006 IEC 0 installation - Edition 2.0 7960 TS 60479-1 NULL 2006 IEC 0 CORR 1 7961 TS 60870-5-601 Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 2006 IEC 0 companion standard - Edition 2.0 7962 TS 60034-27 Rotating electrical machines Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating 2006 IEC 0 electrical machines - Edition 1.0 7963 TS 60034-17 NULL 2006 IEC 0 7964 TS 60034-18-41 NULL 2006 IEC 0 7965 TS 61094-7 Measurement microphones Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory 2006 IEC 0 standard microphones - Edition 1.0 7966 TS 62045-1 Multimedia security Guideline for privacy protection of equipment and systems in and out of use Part 1: General - Edition 2006 IEC 0 1.0 7967 TS 62229 Multimedia systems and equipment - Multimedia e-publishing and e-book - Conceptual model for multimedia e-publishing 2006 IEC 0 - Edition 2.0 7968 TR 62350 Guidance for the correct use of residual currentoperated protective devices (RCDs) for household and similar use - Edition 2006 IEC 0 1.0 7969 TR 62271-300 High-voltage switchgear and controlgear Part 300: Seismic qualification of alternating current circuit-breakers - Edition 2006 IEC 0 1.0 7970 TR 62392 Suitability of typical electrical insulating material (EIM) for polymer recycling - Edition 1.0 2006 IEC 0 7971 TR 62383 Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components 2006 IEC 0 Measurement, modelling and calculation methods - Edition 1.0 7972 TR 62432 The rH index in aqueous and aqueous-organic media - Edition 1.0 2006 IEC 0 7973 TR 62434 pH measurements in difficult media Definitions, standards and procedures - Edition 1.0 2006 IEC 0 7974 TR 62461 Radiation protection instrumentation Determination of uncertainty in measurement - Edition 2.0 2006 IEC 0 7975 TR 61948-4 Nuclear medicine instrumentation Routine tests Part 4: Radionuclide calibrators - Edition 1.0 2006 IEC 0 7976 TR 61804-4 NULL 2006 IEC 0 7977 TR 61734 Application of symbols for binary logic and analogue elements - Edition 2.0 2006 IEC 0 7978 TR 61352 Mnemonics and Symbols for Integrated Circuits - Edition 2.0 2006 IEC 0 7979 TR 61282-3 Fibre optic communication system design guides Part 3: Calculation of link polarization mode dispersion - Edition 2.0 2006 IEC 0 7980 TR 61282-8 Fibre optic communication system design guides Part 8: Calculating dispersion penalty from measured time-resolved chirp 2006 IEC 0 data - Edition 1.0 7981 TR 61282-9 Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and 2006 IEC 0 theory - Edition 2.0 7982 TR 60870-6- Telecontrol Equipment and Systems - Part 6-505: Telecontrol Protocols Compatible with ISO Standards and ITU-T 2006 IEC 0 505 Recommendations - TASE.2 User Guide - Edition 1.1 Consolidated Reprint 7983 TR 61000-2-14 Electromagnetic compatibility (EMC) Part 2-14: Environment Overvoltages on public electricity distribution networks - 2006 IEC 0 Edition 1.0 7984 QC 001004 International Electrotechnical Commission Quality Assessment System for Electronic Components (IECQ) - Specifications 2006 IEC 0 List - Issue 1; Edition 2.0 7985 TR 60728-6-1 Cable networks for television signals, sound signals and interactive services Part 6-1: System guidelines for analogue 2006 IEC 0 optical transmission systems - Edition 1.0 7986 TR 60825-8 Safety of laser products Part 8: Guidelines for the safe use of laser beams on humans - Edition 2.0 2006 IEC 0 7987 PAS 62483 NULL 2006 IEC 0 7988 IECEX TR NULL 2006 IEC 0 60079-18 7989 62132-1 Integrated circuits Measurement of electromagnetic immunity Part 1: General conditions and definitions - Edition 2.0 2006 IEC 0 7990 62129 NULL 2006 IEC 0 7991 62132-4 Integrated circuits Measurement of electromagnetic immunity 150 kHz to 1 GHz Part 4: Direct RF power injection 2006 IEC 0 method - Edition 1.0 7992 62153-4-3 Metallic communication cables test methods Part 4-3: Electromagnetic compatibility (EMC) Surface transfer impedance 2006 IEC 0 Triaxial method - Edition 2.0 7993 62153-4-5 Metallic communication cables test methods Part 4-5: Electromagnetic compatibility (EMC) Coupling or screening 2006 IEC 0 attenuation Absorbing clamp method - Edition 1.0 7994 62153-4-6 Metallic communication cable test methods Part 4-6: Electromagnetic compatibility (EMC) Surface transfer impedance 2006 IEC 0 Line injection method - Edition 1.0 7995 62153-4-7 Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of 2006 IEC 0 transfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and assemblies up to and above 3 GHz Triaxi 7996 62153-4-8 Metallic communication cable test methods Part 4-8: Electromagnetic compatibility (EMC) Capacitive coupling 2006 IEC 0 admittance - Edition 1.0 7997 62153-4-4 Metallic communication cable test methods Part 4-4: Electromagnetic compatibility (EMC) Test method for measuring of 2006 IEC 0 the screening attenuation as up to and above 3 GHz, triaxial method - Edition 2.0 7998 62275 Cable management systems Cable ties for electrical installations - Edition 2.0 2006 IEC 0 7999 62271-3 High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 - Edition 2.0 2006 IEC 0 8000 62271-201 High-voltage switchgear and controlgear Part 201: AC solid-insulation enclosed switchgear and controlgear for rated 2006 IEC 0 voltages above 1 kV and up to and including 52 kV - Edition 2.0 8001 62271-202 High-voltage switchgear and controlgear Part 202: High-voltage/low-voltage prefabricated substation - Edition 2.0 2006 IEC 0 8002 62290-1 Railway applications Urban guided transport management and command/control systems Part 1: System principles and 2006 IEC 0 fundamental concepts - Edition 2.0 8003 62244 Radiation protection instrumentation Installed radiation monitors for the detection of radioactive and special nuclear 2006 IEC 0 materials at national borders - Edition 1.0 8004 62244(2 NULL 2006 IEC 0 8005 62231 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV Definitions, test 2006 IEC 0 methods and acceptance criteria - Edition 1.0 8006 62197-1 Connectors for electronic equipment Quality assessment requirements Part 1: Generic specification - Edition 1.0 2006 IEC 0 8007 62230 Electric cables Spark-test method - Edition 1.1; Consolidated Reprint 2006 IEC 0 8008 62258-5 Semiconductor die products Part 5: Requirements for information concerning electrical simulation - Edition 1.0 2006 IEC 0 8009 62258-5(2 NULL 2006 IEC 0 8010 62258-6 Semiconductor die products Part 6: Requirements for information concerning thermal simulation - Edition 1.0 2006 IEC 0 mes - Edition 1.0 2006 IEC 0_أde fonctionnement des syst _أret«أcifications de s_أLignes directrices pour les sp 62347 8011 8012 62333-1 Noise suppression sheet for digital devices and equipment Part 1: Definitions and general properties - Edition 1.0 2006 IEC 0 8013 62333-2 Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods - Edition 1.1 Consolidated Reprint 2006 IEC 0 8014 62327 Radiation protection instrumentation Hand-held instruments for the detection and identification of radionuclides and for 2006 IEC 0 the indication of ambient dose equivalent rate from photon radiation - Edition 1.0 8015 62339-1 Modular component interfaces for surface-mount fluid distribution components Part 1: Elastomeric seals - Edition 1.0 2006 IEC 0 8016 62329-2 Heat-shrinkable moulded shapes Part 2: Methods of test - Edition 1.0 2006 IEC 0 8017 62317-8 Ferrite cores Dimensions Part 8: E-cores - edition 1.0 2006 IEC 0 8018 62308 Equipment reliability Reliability assessment methods - Edition 1.0 2006 IEC 0 8019 62314 Solid-state relays - Edition 1.0 2006 IEC 0 8020 62310-2 Static transfer systems (STS) Part 2: Electromagnetic compatibility (EMC) requirements - Edition 1.0 2006 IEC 0 8021 62304 Medical device software Software life cycle processes - Edition 1.1; Consolidated Reprint 2006 IEC 0 8022 62391-2 Fixed electric double-layer capacitors for use in electronic equipment Part 2: Sectional specification Electric double-layer 2006 IEC 0 capacitors for power application - Edition 1.0 8023 62391-2-1 Fixed electric double-layer capacitors for use in electronic equipment Part 2-1: Blank detail specification Electric double- 2006 IEC 0 layer capacitors for power application Assessment level EZ - Edition 1.0 8024 62394 Service diagnostic interface for consumer electronics products and networks Implementation for echonet - Edition 3.0 2006 IEC 0 8025 62395-1 Electrical resistance trace heating systems for industrial and commercial applications Part 1: General and testing 2006 IEC 0 requirements - Edition 2.0 8026 62391-1 Fixed electric double-layer capacitors for use in electric and electronic equipment Part 1: Generic specification - Edition 2006 IEC 0 2.0 8027 62372 Nuclear instrumentation Housed scintillators Measurement methods of light output and intrinsic resolution - Edition 1.0 2006 IEC 0 8028 62373 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) - Edition 1.0 2006 IEC 0 8029 62471 Photobiological safety of lamps and lamp systems - Edition 1.0 2006 IEC 0 8030 81714-2 Design of graphical symbols for use in the technical documentation of products Part 2: Specification for graphical symbols 2006 IEC 0 in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange - Edition 8031 CISPR 16-1-3 NULL 2006 IEC 0 CORR 1 8032 CISPR 16-1-2 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and 2006 IEC 0 immunity measuring apparatus Ancillary equipment Conducted disturbances - Edition 2.0 8033 GUIDE 108 Guidelines for ensuring the coherency of IEC publications Application of horizontal standards - Edition 2.0 2006 IEC 0 8034 CISPR-TR 16- NULL 2006 IEC 0 4-5 8035 CISPR.TR 16- NULL 2006 IEC 0 4-5 8036 CISPR 20 Sound and television broadcast receivers and associated equipment Immunity characteristics Limits and methods of 2006 IEC 0 measurement - Edition 6.1 Consolidated Reprint 8037 61937-5 Digital Audio - Interface for Non-Linear PCM Encoded Audio Bitstreams Applying IEC 60958 - Part 5: Non-Linear PCM 2006 IEC 0 Bitstreams According to the DTS (Digital Theater Systems) Format(s) - Edition 2.0 8038 61937-6 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 6: Non-linear PCM 2006 IEC 0 bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats - Edition 2.1 Consolidated Reprint 8039 61937-8 Digital Audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 8: Non-linear PCM 2006 IEC 0 bitstreams according to the Windows Media Audio (WMA) Professional format - Edition 1.0 8040 61951-1 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for 2006 IEC 0 portable applications - Part 1: Nickel-cadmium - Edition 4.0 8041 61966-2-4 Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended- 2006 IEC 0 gamut YCC colour space for video applications - xvYCC - Edition 1.1; Consolidated Reprint 8042 61966-2-4 NULL 2006 IEC 0 CORR 1 8043 61788-7 Superconductivity Part 7: Electronic characteristic measurements Surface resistance of superconductors at microwave 2006 IEC 0 frequencies - Edition 2.0 8044 61788-7(2 NULL 2006 IEC 0 8045 61788-3 Superconductivity Part 3: Critical current measurement DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and 2006 IEC 0 Bi-2223 oxide superconductors - Edition 2.0 8046 61788-1 Superconductivity Part 1: Critical current measurement DC critical current of Nb-Ti composite superconductors - Edition 2006 IEC 0 2.0 8047 61788-10 Superconductivity Part 10: Critical temperature measurement Critical temperature of composite superconductors by a 2006 IEC 0 resistance method - Edition 2.0 8048 61788-2 Superconductivity Part 2: Critical current measurement DC critical current of Nb3Sn composite superconductors - Edition 2006 IEC 0 2.0 8049 61810-7 Electromechanical elementary relays - Part 7: Test and measurement procedures - Edition 2.0 2006 IEC 0 8050 61804-2 Function blocks (FB) for process control - Part 2: Specification of FB concept - Edition 2.0 2006 IEC 0 8051 61992-5 NULL 2006 IEC 0 8052 61992-6 Railway applications Fixed installations DC switchgear Part 6: DC switchgear assemblies - Edition 1.1; Consolidated 2006 IEC 0 Reprint 8053 61992-7-1 Railway applications Fixed installations DC switchgear Part 7-1: Measurement, control and protection devices for 2006 IEC 0 specific use in d.c. traction systems Application guide - Edition 1.0 8054 61992-7-2 Railway applications Fixed installations DC switchgear Part 7-2: Measurement, control and protection devices for 2006 IEC 0 specific use in d.c. traction systems Isolating current transducers and other current measuring devices - Edition 1.0 8055 61992-7-3 Railway applications Fixed installations DC switchgear Part 7-3: Measurement, control and protection devices for 2006 IEC 0 specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices - Edition 1.0 8056 61992-1 Railway Applications - Fixed Installations - DC Switchgear - Part 1: General - Edition 2.1; Consolidated Reprint 2006 IEC 0 8057 61992-2 Railway applications Fixed installations DC switchgear Part 2: DC circuit-breakers - Edition 2.1; Consolidated Reprint 2006 IEC 0 8058 61992-3 Railway applications Fixed installations DC switchgear Part 3: Indoor d.c. disconnectors, switch-disconnectors and 2006 IEC 0 earthing switches - Edition 2.1; Consolidated Reprint 8059 61992-4 Railway applications Fixed installations DC switchgear Part 4: Outdoor d.c. disconnectors, switch-disconnectors and 2006 IEC 0 earthing switches - Edition 1.1; Consolidated Reprint 8060 61966-7-1 Multimedia systems and equipment Colour measurement and management Part 7-1: Colour printers Reflective prints 2006 IEC 0 RGB inputs - Edition 2.0 8061 61967-4 Integrated Circuits - Measurement of Electromagnetic Emissions, 150 kHz to 1 GHz Part 4: Measurement of Conducted 2006 IEC 0 Emissions - 1 OHMS/150 OHMS Direct Coupling Method - Edition 1.1; Consolidated Reprint 8062 61987-1 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 1: 2006 IEC 0 Measuring equipment with analogue and digital output - Edition 1.0 8063 61970-501 Energy management system application program interface (EMS-API) Part 501: Common Information Model Resource 2006 IEC 0 Description Framework (CIM RDF) schema - Edition 1.0 8064 62076 Industrial electroheating installations Test methods for induction channel and induction crucible furnaces - Edition 1.0 2006 IEC 0 8065 62056-47 NULL 2006 IEC 0 8066 62059-41 Electricity metering equipment Dependability Part 41: Reliability prediction - Edition 1.0 2006 IEC 0 8067 62047-2 Semiconductor devices Micro-electromechanical devices Part 2: Tensile testing method of thin film materials - Edition 1.0 2006 IEC 0 8068 62047-3 Semiconductor devices Micro-electromechanical devices Part 3: Thin film standard test piece for tensile testing - Edition 2006 IEC 0 1.0 8069 61754-13 Fibre Optic Connector Interfaces - Part 13: Type FC-PC Connector - Edition 2.0 2006 IEC 0 8070 61753-101-2 Fibre optic interconnecting devices and passive components performance standard Part 101-2: Fibre management systems 2006 IEC 0 for Category C Controlled environment - Edition 1.0 8071 61753-101-3 Fibre optic interconnecting devices and passive components performance standard Part 101-3: Fibre management systems 2006 IEC 0 for Category U Uncontrolled environment - Edition 1.0 8072 61755-2-1 Fibre optic connector optical interfaces Part 2-1: Optical interface standard single mode non-angled physically contacting 2006 IEC 0 fibres - Edition 1.0 8073 61755-2-2 Fibre optic connector optical interfaces Part 2-2: Optical interface standard single mode angled physically contacting fibres 2006 IEC 0 - Edition 1.0 8074 61755-3-2 Fibre optic connector optical interfaces Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia 2006 IEC 0 ferrules for 8 degrees angled-PC single mode fibres - Edition 1.0 8075 61755-3-1 Fibre optic connector optical interfaces Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia 2006 IEC 0 PC ferrule, single mode fibre - Edition 1.0 8076 61755-3-5 Fibre optic connector optical interfaces Part 3-5: Optical interface 2,5 mm and 1,25 mm diameter cylindrical PC 2006 IEC 0 composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre - Edition 1.0 8077 61756-1 Fibre optic interconnecting devices and passive components Interface standard for fibre management systems Part 1: 2006 IEC 0 General and guidance - Edition 1.0 8078 61756-1(2 NULL 2006 IEC 0 8079 61760-1 Surface mounting technology Part 1: Standard method for the specification of surface mounting components (SMDs) - 2006 IEC 0 Edition 2.0 8080 61747-3 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification - Edition 3.0 2006 IEC 0 8081 61747-3-1 Liquid crystal display devices Part 3-1: Liquid crystal display (LCD) cells Blank detail specification - Edition 3.0 2006 IEC 0 8082 61672-3 Electroacoustics Sound level meters Part 3: Periodic tests - Edition 2.0 2006 IEC 0 8083 61537 Cable management Cable tray systems and cable ladder systems - Edition 2.0 2006 IEC 0 8084 61577-1 Radiation Protection Instrumentation - Radon and Radon Decay Product measuring Instruments - Part 1: General principles 2006 IEC 0 - Edition 2.0 8085 61534-21 Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting - 2006 IEC 0 Edition 2.0 8086 61340-3-1 Electrostatics Part 3-1: Methods for simulation of electrostatic effects Human body model (HBM) electrostatic discharge 2006 IEC 0 test waveforms - Edition 2.0 8087 61340-3-2 Electrostatics Part 3-2: Methods for simulation of electrostatic effects Machine model (MM) electrostatic discharge test 2006 IEC 0 waveforms - Edition 2.0 8088 61347-2-1 Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters) - Edition 1.2 2006 IEC 0 Consolidated Reprint 8089 61347-2-8 Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps - Edition 1.1 Consolidated Reprint 2006 IEC 0 8090 61347-2-13 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules - 2006 IEC 0 Edition 2.1; Consolidated Reprint 8091 61347-2-13(2 NULL 2006 IEC 0 8092 61400-2 Wind turbines Part 2: Small wind turbines - Edition 3.0 2006 IEC 0 8093 61400-25-1 Wind turbines Part 25-1: Communications for monitoring and control of wind power plants Overall description of 2006 IEC 0 principles and models - Edition 1.0 8094 61400-25-2 Wind turbines Part 25-2: Communications for monitoring and control of wind power plants Information models - Edition 2006 IEC 0 2.0 8095 61400-25-3 Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange 2006 IEC 0 models - Edition 2.0 8096 61400-25-5 Wind turbines Part 25-5: Communications for monitoring and control of wind power plants Conformance testing - Edition 2006 IEC 0 1.0 8097 61391-1 Ultrasonics Pulse-echo scanners Part 1: Techniques for calibrating spatial measurement systems and measurement of 2006 IEC 0 system point-spread function response - Edition 1.0 8098 61378-3 Converter transformers Part 3: Application guide - Edition 2.0 2006 IEC 0 8099 61377-1 NULL 2006 IEC 0 8100 61400-1 Wind turbines Part 1: Design requirements - Edition 3.1 Consolidated Reprint 2005 IEC 0 8101 61400-12-1 Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines - 2005 IEC 0 Edition 2.0 8102 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) - 2005 IEC 0 Edition 2.0 8103 61338-4 Waveguide type dielectric resonators Part 4: Sectional specification - Edition 1.0 2005 IEC 0 8104 61338-4-1 Waveguide type dielectric resonators Part 4-1: Blank detail specification - Edition 1.0 2005 IEC 0 8105 61338-1-4 Waveguide type dielectric resonators Part 1-4: General information and test conditions Measurement method of complex 2005 IEC 0 relative permittivity for dielectric resonator materials at millimetre-wave frequency - Edition 1.0 8106 61549 Miscellaneous Lamps - Edition 2.1 Consolidated Reprint 2005 IEC 0 8107 61675-2 Radionuclide imaging devices Characteristics and test conditions Part 2: Gamma cameras for planar, wholebody, and 2005 IEC 0 SPECT imaging - Edition 2.0 8108 61605 Fixed inductors for use in electronic and telecommunication equipment Marking codes - Edition 3.0 2005 IEC 0 8109 61591 Household range hoods - Methods for measuring performance - Edition 1.1 Consolidated Reprint 2005 IEC 0 8110 61606-4 Audio and audiovisual equipment Digital audio parts Basic measurement methods of audio characteristics Part 4: 2005 IEC 0 Personal computer - Edition 1.0 8111 61591(2 NULL 2005 IEC 0 8112 61744 Calibration of Fibre Optic Chromatic Dispersion Test Sets - Edition 2.0 2005 IEC 0 8113 61754-5 Fibre Optic Connector Interfaces - Part 5: Type MT Connector Family - Edition 2.0 2005 IEC 0 8114 61754-6 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 6: Type MU connector 2005 IEC 0 family - Edition 2.0 8115 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres General and 2005 IEC 0 guidance - Edition 1.0 8116 61755-1(2 NULL 2005 IEC 0 8117 61754-21 Fibre optic connector interfaces Part 21: Type SMI connector family for plastic optical fibre - Edition 1.0 2005 IEC 0 8118 61754-22 Fibre optic connector interfaces Part 22: Type F-SMA connector family - Edition 1.0 2005 IEC 0 8119 61754-23 Fibre optic connector interfaces Part 23: Type LX.5 connector family - Edition 1.0 2005 IEC 0 8120 61754-10 Fibre Optic Connector Interfaces - Part 10: Type Mini-MPO Connector Family - Edition 2.0 2005 IEC 0 8121 62055-31 Electricity metering Payment systems Part 31: Particular requirements Static payment meters for active energy (classes 1 2005 IEC 0 and 2) - Edition 1.0 8122 62053-52 Electricity metering equipment (AC) Particular requirements Part 52: Symbols - Edition 1.0 2005 IEC 0 8123 62040-2 Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements - Edition 3.0 2005 IEC 0 8124 62044-2 Cores made of soft magnetic materials Measuring methods Part 2: Magnetic properties at low excitation level - Edition 1.0 2005 IEC 0 8125 62047-1 Semiconductor devices Micro-electromechanical devices Part 1: Terms and definitions - Edition 2.0 2005 IEC 0 8126 62071-1 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 1: VTR 2005 IEC 0 specifications - Edition 1.0 8127 62071-2 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 2: Compression 2005 IEC 0 format - Edition 1.0 8128 62071-3 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 3: Data stream format 2005 IEC 0 - Edition 1.0 8129 61967-2 Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 2: Measurement of radiated 2005 IEC 0 emissions TEM cell and wideband TEM cell method - Edition 1.0 8130 61966-6 Multimedia systems and equipment Colour measurement and management Part 6: Front projection displays - Edition 1.0 2005 IEC 0 8131 61970-1 Energy management system application program interface (EMS-API) Part 1: Guidelines and general requirements - 2005 IEC 0 Edition 1.0 8132 61970-1(2 NULL 2005 IEC 0 8133 62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software - Edition 1.0 2005 IEC 0 8134 62025-2 High frequency inductive components Non-electrical characteristics and measuring methods Part 2: Test methods for non- 2005 IEC 0 electrical characteristics - Edition 1.0 8135 62025-2(2 NULL 2005 IEC 0 8136 61988-3-1 Plasma display panels Part 3-1: Mechanical interface - Edition 1.0 2005 IEC 0 8137 61995-1 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements - Edition 1.1; 2005 IEC 0 Consolidated Reprint 8138 61788-9 Superconductivity Part 9: Measurements for bulk high temperature superconductors Trapped flux density of large grain 2005 IEC 0 oxide superconductors - Edition 1.0 8139 61883-6 Consumer audio/video equipment Digital interface Part 6: Audio and music data transmission protocol - Edition 3.0 2005 IEC 0 8140 61925 Multimedia systems and equipment Multimedia home server systems Vocabulary of home server - Edition 1.0 2005 IEC 0 8141 62389 Methods of measurement for DVD players - Edition 1.0 2005 IEC 0 8142 62403 High density recording format on CD-R/RW disc systems HD-BURN format - Edition 1.0 2005 IEC 0 8143 62310-1 Static transfer systems (STS) Part 1: General and safety requirements - Edition 1.0 2005 IEC 0 8144 62317-4 Ferrite cores Dimensions Part 4: RM-cores and associated parts - Edition 1.0 2005 IEC 0 8145 62317-7 Ferrite cores Dimensions Part 7: EER-cores - Edition 1.0 2005 IEC 0 8146 62319-1 Polymeric thermistors Directly heated positive step function temperature coefficient Part 1: Generic specification - Edition 2005 IEC 0 1.0 8147 62319-1-1 Polymeric thermistors Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification 2005 IEC 0 Current limiting application - Edition 1.0 8148 62323 Dimensions of half pot-cores made of ferrite for inductive proximity switches - Edition 1.0 2005 IEC 0 8149 62328-1 Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 1: 2005 IEC 0 General description and architecture - Edition 1.0 8150 62328-2 Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 2: 2005 IEC 0 General recording structure - Edition 1.0 8151 62328-3 Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 3: 2005 IEC 0 Broadcasting system specific recording structure ISDB - Edition 1.0 8152 62329-1 Heat shrinkable moulded shapes - Part 1: Definitions and general requirements - Edition 1.0 2005 IEC 0 8153 62345 ID format for 50 mm magneto-optical disc system - Edition 1.0 2005 IEC 0 8154 62271-108 High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated 2005 IEC 0 voltages of 72,5 kV and above - Edition 1.0 8155 62233 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human 2005 IEC 0 exposure - Edition 1.0 8156 62255-2 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 2: Unfilled cables Sectional specification - Edition 1.0 8157 62255-2-1 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 2-1: Unfilled cables Blank detail specification - Edition 1.0 8158 62255-3 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 3: Filled cables Sectional specification - Edition 1.0 8159 62255-3-1 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 3-1: Filled cables Blank detail specification - Edition 1.0 8160 62255-4 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 4: Aerial drop cables Sectional specification - Edition 1.0 8161 62255-4-1 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 4-1: Aerial drop cables Blank detail specification - Edition 1.0 8162 62255-5 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 5: Filled drop cables Sectional specification - Edition 1.0 8163 62255-5-1 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2005 IEC 0 telecommunication networks) Outside plant cables Part 5-1: Filled drop cables Blank detail specification - Edition 1.0 8164 62297-1 Triggering messages for broadcast applications Part 1: Format - Edition 1.0 2005 IEC 0 8165 62297-2 Triggering messages for broadcast applications Part 2: Transport methods - Edition 1.0 2005 IEC 0 8166 62298-1 TeleWeb application Part 1: General description - Edition 1.0 2005 IEC 0 8167 62298-2 TeleWeb application Part 2: Delivery methods - Edition 1.0 2005 IEC 0 8168 62298-3 TeleWeb application Part 3: Superteletext profile - Edition 1.0 2005 IEC 0 8169 62298-4 TeleWeb application - Part 4: Hyperteletext profile - Edition 1.0 2005 IEC 0 8170 62274 Medical electrical equipment Safety of radiotherapy record and verify systems - Edition 1.0 2005 IEC 0 8171 62209-1 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from 2005 IEC 0 hand-held and body-mounted wireless communication devices Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) - E 8172 62194 Method of evaluating the thermal performance of enclosures - Edition 1.0 2005 IEC 0 8173 62150-1 Fibre optic active components and devices Test and measurement procedures Part 1: General and guidance - Edition 1.0 2005 IEC 0 8174 62141 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 2005 IEC 0 compression Type D-16 format - Edition 1.0 8175 62093 Balance-of-system components for photovoltaic systems Design qualification natural environments - Edition 1.0 2005 IEC 0 8176 62132-5 Integrated circuits Measurement of electromagnetic immunity, 150 kHz to 1 GHz Part 5: Workbench Faraday cage method 2005 IEC 0 - Edition 1.0 8177 IECQ 001002-3 NULL 2005 IEC 0 8178 PAS 61906 NULL 2005 IEC 0 8179 PAS 62435 NULL 2005 IEC 0 8180 PAS 62437 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices Limits and 2005 IEC 0 methods of measurement Specifications for active antennas - Edition 1.0 8181 TR 61000-1-4 Electromagnetic compatibility (EMC) Part 1-4: General Historical rationale for the limitation of power-frequency 2005 IEC 0 conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz - Edition 1.0 8182 TR 61305-6 Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 6: 2005 IEC 0 Listening tests on loudspeakers Single stimulus ratings and paired comparisons - Edition 1.0 8183 TR 61508-0 Functional safety of electrical/electronic/ programmable electronic safety-related systems Part 0: Functional safety and IEC 2005 IEC 0 61508 - Edition 1.0 8184 TR 62051-1 ELECTRICITY METERING DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL 2005 IEC 0 CORR 1 GLOSSARY OF TERMS Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM CORRIGENDUM 1 - Edition 1.0 8185 TR 62055-21 Electricity metering Payment systems Part 21: Framework for standardization - Edition 1.0 2005 IEC 0 8186 TR 62010 Analyser systems Maintenance management - Edition 2.0 2005 IEC 0 8187 TR 61948-3 Nuclear medicine instrumentation Routine tests Part 3: Positron emission tomographs - Edition 1.0 2005 IEC 0 8188 TR 61963 NULL 2005 IEC 0 8189 TR 61967-4-1 Integrated circuits . Measurement of electromagnetic emissions, 150 kHz to 1 GHz . Part 4-1: Measurement of conducted 2005 IEC 0 emissions - 1 Ohm/150 Ohm direct coupling method - Application guidance to IEC 61967-4 - Edition 1.0 8190 TR 61967-4-1(2 NULL 2005 IEC 0 8191 TR 61901 Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) up to 2005 IEC 0 and including 500 kV (Um = 550 kV) - Edition 2.0 8192 TR 61901(2 NULL 2005 IEC 0 8193 TR 62390 Common automation device Profile guideline - Edition 1.0 2005 IEC 0 8194 TR 62285 Application guide for non-linear coefficient measuring methods - Edition 2.0 2005 IEC 0 8195 TR 62325-101 Framework for energy market communications Part 101: General guidelines - Edition 1.0; Replaces IEC 62195: 2000 and 2005 IEC 0 Its Amendment 2002 8196 TR 62325-102 Framework for energy market communications Part 102: Energy market model example - Edition 1.0; Replaces IEC 62195: 2005 IEC 0 2000 and Its Amendment 2002 8197 TR 62325-501 Framework for energy market communications Part 501: General guidelines for use of ebXML - Edition 1.0; Replaces IEC 2005 IEC 0 62195: 2000 and Its Amendment 2002 8198 TR 62331 Pulsed field magnetometry - Edition 1.0 2005 IEC 0 8199 TR 62331(2 NULL 2005 IEC 0 8200 TR 62349 Guidance of measurement methods and test procedures Basic tests for polarization-maintaining optical fibres - Edition 2.0 2005 IEC 0 8201 TR 62102 Electrical safety Classification of interfaces for equipment to be connected to information and communications technology 2005 IEC 0 networks - Edition 2.0 8202 TR 62235 Nuclear facilities Instrumentation and control systems important to safety Systems of interim storage and final repository of 2005 IEC 0 nuclear fuel and waste - Edition 1.0 8203 TR 62263 Live working Guidelines for the installation and maintenance of optical fibre cables on overhead power lines - Edition 1.0 2005 IEC 0 8204 TS 62101 Electrical insulation systems Short-time evaluation of combined thermal and electrical stresses - Edition 1.0 2005 IEC 0 8205 TS 62257-4 Recommendations for renewable energy and hybrid systems for rural electrification Part 4: System selection and design - 2005 IEC 0 Edition 2.0 8206 TS 62257-5 Recommendations for renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical 2005 IEC 0 hazards - Edition 2.0 8207 TS 62257-6 Recommendations for renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, 2005 IEC 0 maintenance and replacement - Edition 2.0 8208 TS 61970-401 Energy management system application program interface (EMS-API) Part 401: Component interface specification (CIS) 2005 IEC 0 framework - Edition 1.0 8209 TS 61967-3 Integrated circuits Measurement of electromagnetic emissions Part 3: Measurement of radiated emissions Surface scan 2005 IEC 0 method - Edition 2.0 8210 TS 61400-14 Wind turbines Part 14: Declaration of apparent sound power level and tonality values - Edition 1.0 2005 IEC 0 8211 TS 61244-3 NULL 2005 IEC 0 8212 TS 60695-9-2 NULL 2005 IEC 0 8213 TS 60695-11-21 Fire hazard testing Part 11-21: Test flames 500 W vertical flame test method for tubular polymeric materials - Edition 1.0 2005 IEC 0 8214 TS 60479-1 Effects of current on human beings and livestock Part 1: General aspects - Edition 4.1; Consolidated Reprint 2005 IEC 0 8215 TS 62393 Portable and hand-held multimedia equipment Mobile computers Battery run-time measurement - Edition 1.0 2005 IEC 0 8216 TS 62325-502 Framework for energy market communications Part 502: Profile of ebXML - Edition 1.0; Replaces IEC 62195: 2000 and 2005 IEC 0 Amendment 2002 8217 60630 Maximum Lamp Outlines for Incandescent Lamps - Edition 2.5 Consolidated Reprint 2005 IEC 0 8218 60534-8-1 Industrial-Process Control Valves Part 8: Noise Considerations Section One - Laboratory Measurement of Noise Generated 2005 IEC 0 by Aerodynamic Flow Through Control Valves - Edition 2.0 8219 60534-8-4 Industrial-process control valves Part 8-4: Noise considerations Prediction of noise generated by hydrodynamic flow - 2005 IEC 0 Edition 3.0 8220 60534-1 Industrial-process control valves Part 1: Control valve terminology and general considerations - Edition 3.0 2005 IEC 0 8221 60502-2 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 2005 IEC 0 36 kV) Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) - Edition 3.0 8222 60512-23-7 Connectors for electronic equipment Tests and measurements Part 23-7: Screening and filtering tests Test 23g: Effective 2005 IEC 0 transfer impedance of connectors - Edition 1.0 8223 60519-8 Safety in Electroheat Installations Part 8: Particular Requirements for Electro-Slag Remelting Furnaces - Edition 2.0 2005 IEC 0 8224 60519-9 Safety in Electroheat Installations Part 9: Particular Requirements for High-Frequency Dielectric Heating Installations - 2005 IEC 0 Edition 2.0 8225 60519-3 Safety in electroheat installations Part 3: Particular requirements for induction and conduction heating and induction 2005 IEC 0 melting installations - Edition 3.0 8226 60519-3(2 NULL 2005 IEC 0 8227 60384-14-1 Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification Fixed capacitors for electromagnetic 2005 IEC 0 interference suppression and connection to the supply mains Assessment level DZ - Edition 3.0 8228 60384-16 Fixed capacitors for use in electronic equipment Part 16: Sectional specification: Fixed metallized polypropylene film 2005 IEC 0 dielectric d.c. capacitors - Edition 2.0 8229 60384-16-1 Fixed capacitors for use in electronic equipment Part 16-1: Blank detail specification: Fixed metallized polypropylene film 2005 IEC 0 dielectric d.c. capacitors Assessment levels E and EZ - Edition 2.0 8230 60384-17 Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed metallized polypropylene film 2005 IEC 0 dielectric a.c. and pulse capacitors - Edition 2.0 8231 60384-17-1 Fixed capacitors for use in electronic equipment Part 17-1: Blank detail specification: Fixed metallized polypropylene film 2005 IEC 0 dielectric a.c. and pulse capacitors Assessment levels E and EZ - Edition 2.0 8232 60371-3-5 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 5: Glass-backed mica paper with 2005 IEC 0 an epoxy resin binder for post-impregnation (VPI) - Edition 2.0 8233 60371-3-2 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper - Edition 2.0 2005 IEC 0 8234 60376 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment - Edition 2.0 2005 IEC 0 8235 60364-7-753 Low-voltage electrical installations Part 7-753: Requirements for special installations or locations Heating cables and 2005 IEC 0 embedded heating systems - Edition 2.0 8236 60364-7-704 Low voltage electrical installations Part 7-704: Requirements for special installations or locations Construction and 2005 IEC 0 demolition site installations - Edition 3.0 8237 60364-7-706 Low-voltage electrical installations Part 7-706: Requirements for special installations or locations Conducting locations 2005 IEC 0 with restricted movement - Edition 2.0 8238 60364-5-51 Electrical installations of buildings Part 5-51: Selection and erection of electrical equipment Common rules - Edition 5.0 2005 IEC 0 8239 60364-1 Low-voltage electrical installations Part 1: Fundamental principles, assessment of general characteristics, definitions - 2005 IEC 0 Edition 5.0 8240 60364-4-41 Low-voltage electrical installations Part 4-41: Protection for safety Protection against electric shock - Edition 5.1; 2005 IEC 0 Cconsolidated Reprint 8241 60336 Medical electrical equipment - X-ray tube assemblies for medical diagnosis Characteristics of focal spots - Edition 4.0 2005 IEC 0 8242 60404-8-3 Magnetic materials Part 8-3: Specifications for individual materials Cold-rolled electrical non-alloyed and alloyed steel 2005 IEC 0 sheet and strip delivered in the semi-processed state - Edition 3.0 8243 60384-23 Fixed capacitors for use in electronic equipment Part 23: Sectional specification Fixed metallized polyethylene 2005 IEC 0 naphthalate film dielectric surface mount d.c. capacitors - Edition 2.0 8244 60384-2-1 Fixed capacitors for use in electronic equipment Part 2-1: Blank detail specification: Fixed metallized polyethylene- 2005 IEC 0 terephthalate film dielectric d.c. capacitors Assessment levels E and EZ - Edition 2.0 8245 60384-23-1 Fixed capacitors for use in electronic equipment Part 23-1: Blank detail specification Fixed surface mount metallized 2005 IEC 0 polyethylene naphthalate film dielectric DC capacitors Assessment level EZ - Edition 1.0 8246 60384-23-1(2 NULL 2005 IEC 0 8247 60384-9-1 Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, 2005 IEC 0 Class 2 Assessment level EZ - Edition 2.0 8248 60384-8 Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, 2005 IEC 0 Class 1 - Edition 4.0 8249 60384-8-1 Fixed capacitors for use in electronic equipment Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, 2005 IEC 0 Class 1 Assessment level EZ - Edition 2.0 8250 60384-9 Fixed capacitors for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, 2005 IEC 0 Class 2 - Edition 4.0 8251 60320-2-3 Appliance Couplers for Household and Similar General Purposes - Part 2-3: Appliance Coupler with a Degree of Protection 2005 IEC 0 Higher Than IPX0 - Edition 1.1 Consolidated Reprint 8252 60317-32 AMD NULL 2005 IEC 0 2 8253 60317-32 AMD NULL 2005 IEC 0 2(2 8254 60335-2-40 Household and similar electrical appliances Safety Part 2-40: Particular requirements for electrical heat pumps, air- 2005 IEC 0 conditioners and dehumidifiers - Edition 5.1; Consolidated Reprint 8255 60055-1 Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and 2005 IEC 0 Excluding Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and their Accessories - Edition 5.1 Consolidated Reprint 8256 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps - Edition 2005 IEC 0 3.35 Consolidated Reprint ***See IEC 60061 SNAPSHOTS for more current material*** 8257 60061-1 AMD Amendment 36 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2005 IEC 0 36 Lampholders - Edition 3.35 8258 60061-2 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders - Edition 2005 IEC 0 3.32 Consolidated Reprint 8259 60061-2 AMD Amendment 33 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: 2005 IEC 0 33 Lampholders - Edition 3.32 8260 60027-2 Letter Symbols to Be Used in Electrical Technology - Part 2: Telecommunications and Electronics - Edition 3.0 2005 IEC 0 8261 60027-1 AMD Letter symbols to be used in electrical technology Part 1: General Amendment 2 - Edition 6.0 2005 IEC 0 2 8262 60027-1 AMD NULL 2005 IEC 0 2(2 8263 60092-352 Electrical installations in ships Part 352: Choice and installation of electrical cables - Edition 3.0 2005 IEC 0 8264 60081 AMD 3 Amendment 3 Double-capped fluorescent lamps Performance specifications - Edition 5.1 2005 IEC 0 8265 60076-7 Power transformers Part 7: Loading guide for oil-immersed power transformers - Edition 1.0; Replaces IEC 60354:1991 2005 IEC 0 8266 60076-10-1 Power transformers - Part 10-1: Determination of sound levels Application guide - Edition 2.0 2005 IEC 0 8267 60068-2-80 Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode - Edition 1.0 2005 IEC 0 8268 60061-4 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: Guidelines and general 2005 IEC 0 information - Edition 1.9 Consolidated Reprint 8269 60064 Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes - Performance Requirements - Edition 6.3 2005 IEC 0 Consolidated Reprint 8270 60068-2-10 Environmental testing Part 2-10: Tests Test J and guidance: Mould growth - Edition 6.0 2005 IEC 0 8271 60068-2-47 Environmental testing Part 2-47: Tests Mounting of specimens for vibration, impact and similar dynamic tests - Edition 2005 IEC 0 3.0 8272 60068-2-30 Environmental testing Part 2-30: Tests Test Db: Damp heat, cyclic (12 h + 12 h cycle) - Edition 3.0 2005 IEC 0 8273 60118-7 Electroacoustics Hearing aids Part 7: Measurement of the performance characteristics of hearing aids for production, 2005 IEC 0 supply and delivery quality assurance purposes - Edition 2.0 8274 60118-7(2 NULL 2005 IEC 0 8275 60118-8 Electroacoustics Hearing aids Part 8: Methods of measurement of performance characteristics of hearing aids under 2005 IEC 0 simulated in situ working conditions - Edition 2.0 8276 60317-0-2 Specifications for Particular Types of Winding Wires - Part 0-2: General Requirements - Enamelled Rectangular Copper 2005 IEC 0 Wire - Edition 3.0 8277 60308 Hydraulic turbines Testing of control systems - Edition 2.0 2005 IEC 0 8278 60216-2 Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of 2005 IEC 0 electrical insulating materials Choice of test criteria - Edition 4.0 8279 60254-1 Lead-acid traction batteries Part 1: General requirements and methods of test - Edition 4.0 2005 IEC 0 8280 60255-27 Measuring relays and protection equipment Part 27: Product safety requirements - Edition 2.0 2005 IEC 0 8281 60239 Graphite electrodes for electric arc furnaces Dimensions and designation - Edition 4.0 2005 IEC 0 8282 60794-3-21 Optical fibre cables Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication 2005 IEC 0 cables for use in premises cabling - Edition 2.0 8283 60870-6-802 Telecontrol equipment and systems Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T 2005 IEC 0 recommendations TASE.2 Object models - Edition 3.0 8284 60871-1 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V Part 1: General - Edition 4.0 2005 IEC 0 8285 60851-4 Winding wires Test methods Part 4: Chemical properties - Edition 3.0 2005 IEC 0 8286 60836 Specifications for unused silicone insulating liquids for electrotechnical purposes - Edition 3.0 2005 IEC 0 8287 60950-23 Information technology equipment Safety Part 23: Large data storage equipment - Edition 1.0 2005 IEC 0 8288 60947-5-3 Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements Requirements for 2005 IEC 0 proximity devices with defined behaviour under fault conditions (PDDB) - Edition 2.0 8289 60950-22 Information technology equipment Safety Part 22: Equipment to be installed outdoors - Edition 2.0 2005 IEC 0 8290 60947-5-5 Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency 2005 IEC 0 stop device with mechanical latching function - Edition 1.2; Consolidated Reprint 8291 60947-6-1 Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment Transfer switching equipment - Edition 2005 IEC 0 2.1 Consolidated Reprint 8292 60983 Miniature Lamps - Edition 2.1 Consolidated Reprint 2005 IEC 0 8293 61000-2-13 Electromagnetic compatibility (EMC) Part 2-13: Environment High-power electromagnetic (HPEM) environments 2005 IEC 0 Radiated and conducted - Edition 1.0 8294 60903 CORR 2 NULL 2005 IEC 0 8295 60939-2 Passive filter units for electromagnetic interference suppression Part 2: Sectional specification Passive filter units for 2005 IEC 0 which safety tests are appropriate Test methods and general requirements - Edition 2.0 8296 60939-2 CORR Passive filter units for electromagnetic interference suppression Part 2: Sectional specification Passive filter units for 2005 IEC 0 1 which safety tests are appropriate Test methods and general requirements CORRIGENDUM 1 - Edition 2.0 8297 60730-2-2 NULL 2005 IEC 0 8298 60730-2-2(2 NULL 2005 IEC 0 8299 60730-2-12 Automatic electrical controls - Part 2-12: Particular requirements for electrically operated door locks - Edition 3.0 2005 IEC 0 8300 60740-1 Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics - Edition 1.0 2005 IEC 0 8301 60789 NULL 2005 IEC 0 8302 60779 Industrial electroheat equipment Test methods for electroslag remelting furnaces - Edition 2.0 2005 IEC 0 8303 60708 Low-frequency cables with polyolefin insulationand moisture barrier polyolefin sheath - Edition 1.0 2005 IEC 0 8304 60704-2-3 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: 2005 IEC 0 Particular requirements for dishwashers - Edition 3.0 8305 60704-2-5 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: 2005 IEC 0 Particular requirements for electric thermal storage room heaters - Edition 2.1 Consolidated Reprint 8306 60728-10 Cable networks for television signals, sound signals and interactive services Part 10: System performance for return paths - 2005 IEC 0 Edition 3.0 8307 60664-4 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress - 2005 IEC 0 Edition 2.0 8308 60684-3-216 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heatshrinkable, flame- 2005 IEC 0 retarded, limited-fire-hazard sleeving - Edition 1.2 Consolidated Reprint 8309 60684-3-212 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 212: Heat-Shrinkable 2005 IEC 0 Polyolefin Sleevings - Edition 2.0 8310 60684-3-214 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 214: Heat-Shrinkable, 2005 IEC 0 Polyolefin Sleeving, Not Flame Retarded, Shrink Ratio 3:1 - Thick and Medium Wall - Edition 3.0 8311 61196-1-316 Coaxial communication cables Part 1-316: Mechanical test methods Test of maximum pulling force of cable - Edition 1.0 2005 IEC 0 8312 61215 NULL 2005 IEC 0 8313 61225 Nuclear power plants Instrumentation and control systems important to safety Requirements for electrical supplies - 2005 IEC 0 Edition 2.0 8314 61249-2-22 Materials for printed boards and other interconnecting structures Part 2-22: Reinforced base materials clad and unclad 2005 IEC 0 Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper- clad - Edition 1 8315 61249-2-23 Materials for printed boards and other interconnecting structures Part 2-23: Reinforced base materials, clad and unclad 2005 IEC 0 Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad - Edition 1.0; Replaces IEC 60249 Ser 8316 61249-2-26 Materials for printed boards and other interconnecting structures Part 2-26: Reinforced base materials clad and unclad Non- 2005 IEC 0 halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad 8317 61249-2-1 Materials for printed boards and other interconnecting structures Part 2-1: Reinforced base materials, clad and unclad 2005 IEC 0 Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad - Edition 1.0; Replaces IEC 60249 Series 8318 61249-2-2 Materials for printed boards and other interconnecting structures Part 2-2: Reinforced base materials, clad and unclad 2005 IEC 0 Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad - Edition 1.0; Replaces IEC 60249 Series 8319 61196-1 Coaxial Communication Cables - Part 1: Generic Specification - General, Definitions, Requirements - Edition 2.0 2005 IEC 0 8320 61196-1-100 Coaxial communication cables Part 1-100: Electrical test methods General requirements - Edition 2.0 2005 IEC 0 8321 61196-1-101 Coaxial communication cables Part 1-101: Electrical test methods Test for conductor d.c. resistance of cable - Edition 1.0 2005 IEC 0 ro 2005 IEC 0_أCoaxial communication cables Part 1-102: Electrical test methods Test for insulation resistance of cable dielectric Num 61196-1-102 8322 rence Reference number CEI/IEC 61196-1-102:2005 - Edition 1.0_أf_أde r 8323 61196-1-103 Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable - Edition 2.0 2005 IEC 0 8324 61196-1-104 Coaxial communication cables - Part 1-104: Electrical test methods - Test for the stability of the capacitance of cable versus 2005 IEC 0 temperature - Edition 2.0 8325 61196-1-105 Coaxial communication cables Part 1-105: Electrical test methods Test for withstand voltage of cable dielectric - Edition 2005 IEC 0 1.0 8326 61196-1-107 Coaxial communication cables Part 1-107: Electrical test methods Test for cable microphony charge level (mechanically 2005 IEC 0 induced noise) - Edition 1.0 8327 61196-1-111 Coaxial communication cables Part 1-111: Electrical test methods Stability of phase test methods - Edition 2.0 2005 IEC 0 8328 61196-1-200 Coaxial communication cables Part 1-200: Environmental test methods General requirements - Edition 2.0 2005 IEC 0 8329 61196-1-206 Coaxial communication cables Part 1-206: Environmental test methods Climatic sequence - Edition 1.0 2005 IEC 0 8330 61196-1-301 Coaxial communication cables Part 1-301: Mechanical test methods Test for ovality - Edition 1.0 2005 IEC 0 8331 61196-1-302 Coaxial communication cables Part 1-302: Mechanical test methods Test for eccentricity - Edition 1.0 2005 IEC 0 8332 61196-1-310 Coaxial communication cables Part 1-310: Mechanical test methods Test for torsion characteristics of copper-clad metals - 2005 IEC 0 Edition 1.0 8333 61185 NULL 2005 IEC 0 8334 61169-29 Radio-frequency connectors Part 29: Sectional specification Miniature radio frequency coaxial connectors model screw, 2005 IEC 0 snap-on, push-pull or quick-lock, slide-in (rack and panel applications) Characteristic impedance 50 OHM (type 1,0/2,3) 50 OHM and 75 OHM 8335 61175 NULL 2005 IEC 0 8336 61315 Calibration of fibre-optic power meters - Edition 2.0 2005 IEC 0 8337 61332 Soft Ferrite Material Classification - Edition 3.0 2005 IEC 0 8338 61308 High-Frequency Dielectric Heating Installations - Test Methods for the Determination of Power Output - Edition 2.0 2005 IEC 0 8339 61300-3-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: 2005 IEC 0 Examinations and measurements - Visual examination - Edition 2.0 8340 61300-2-42 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-42: Tests - 2005 IEC 0 Static side load for strain relief - Edition 3.0 8341 61300-3-29 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-29: 2005 IEC 0 Examinations and measurements Spectral transfer characteristics of DWDM devices - Edition 2.0 8342 61300-3-37 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-37: 2005 IEC 0 Examinations and measurements Endface angle of angle-polished optical fibres - Edition 1.0 8343 61280-2-10 Fibre optic communication subsystem test procedures Part 2-10: Digital systems Time-resolved chirp and alpha-factor 2005 IEC 0 measurement of laser transmitters - Edition 1.0 8344 61267 Medical diagnostic X-ray equipment Radiation conditions for use in the determination of characteristics - Edition 2.0 2005 IEC 0 8345 61249-4-11 Materials for printed boards and other interconnecting structures Part 4-11: Sectional specification set for prepreg materials, 2005 IEC 0 unclad Non-halogenated epoxide, woven E-glass prepreg of defined flammability - Edition 1.0 8346 61249-4-12 Materials for printed boards and other interconnecting structures Part 4-12: Sectional specification set for prepreg materials, 2005 IEC 0 unclad Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability - Edition 1.0 8347 61249-4-2 Materials for printed boards and other interconnecting structures Part 4-2: Sectional specification set for prepreg materials, 2005 IEC 0 unclad Multifunctional epoxide woven E-glass prepreg of defined flammability - Edition 1.0 8348 61249-4-5 Materials for printed boards and other interconnecting structures Part 4-5: Sectional specification set for prepreg materials, 2005 IEC 0 unclad Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability - Edition 1.0 sphere analysis method - 2005 IEC 0 _أOptical amplifiers Test methods Part 11-2: Polarization mode dispersion parameter Poincar 61290-11-2 8349 Edition 1.0 8350 61290-1-2 Optical amplifiers Test methods Part 1-2: Power and gain parameters Electrical spectrum analyzer method - Edition 2.0 2005 IEC 0 8351 61290-1-3 Optical amplifiers Test methods Part 1-3: Power and gain parameters Optical power meter method - Edition 3.0 2005 IEC 0 8352 61287-1 Railway applications Power converters installed on board rolling stock Part 1: Characteristics and test methods - Edition 2005 IEC 0 3.0 8353 61300-2-18 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - 2005 IEC 0 Dry heat - High temperature endurance - Edition 2.0 8354 61000-4-33 Electromagnetic compatibility (EMC) Part 4-33: Testing and measurement techniques Measurement methods for high- 2005 IEC 0 power transient parameters - Edition 1.0 8355 61000-4-5 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test - Edition 3.0 2005 IEC 0 8356 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments - 2005 IEC 0 Edition 3.0 8357 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and 2005 IEC 0 light-industrial environments - Edition 3.0 8358 61010-2-040 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular 2005 IEC 0 requirements for sterilizers and washer-disinfectors used to treat medical materials - Edition 2.0 8359 61034-1 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus - Edition 3.1 2005 IEC 0 Consolidated Reprint 8360 61034-2 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements - 2005 IEC 0 Edition 3.1; Consolidated Reprint 8361 61019-2 Surface Acoustic Wave (SAW) Resonators - Part 2: Guide to the Use - Edition 2.0 2005 IEC 0 8362 61019-2(2 NULL 2005 IEC 0 8363 61162-402 NULL 2005 IEC 0 8364 61160 Design Review - Edition 2.0 2005 IEC 0 8365 61086-2 CORR Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test CORRIGENDUM 1 - Edition 2.0 2005 IEC 0 1 8366 61126 AMD 2 Procedure for use in the preparation of maximum lamp outlines - Edition 1.0; Includes Amendment 1: 10/1996 and 2005 IEC 0 Amendment 2: 08/2005 8367 61108-4 Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 4: 2004 IEC 0 Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment Performance requirements, methods of testing and required test results 8368 61086-3-1 Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials Coatings for 2004 IEC 0 general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3) - Edition 2.0 8369 61094-6 Measurement microphones Part 6: Electrostatic actuators for determination of frequency response - Edition 1.0 2004 IEC 0 8370 61076-7-001 Connectors for electronic equipment Part 7-001: Cable outlet accessories Blank detail specification - Edition 1.0 2004 IEC 0 8371 61086-1 Coatings for loaded printed wire boards (conformal coatings) Part 1: Definitions, classification and general requirements - 2004 IEC 0 Edition 2.0 8372 61086-2 Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test - Edition 2.0 2004 IEC 0 8373 61164 Reliability Growth - Statistical Test and Estimation Methods - Edition 2.0 2004 IEC 0 8374 61019-1 Surface acoustic wave (SAW) resonators Part 1: Generic specification - Edition 1.0 2004 IEC 0 8375 61047 D.C. or A.C. Supplied Electronic Step-Down Convertors for Filament Lamps - Performance Requirements - Edition 2.0 2004 IEC 0 8376 61076-2-103 Connectors for electronic equipment Part 2-103: Circular connectors Detail specification for a range of multipole 2004 IEC 0 Edition 1.0 - (_آXLR_آ connectors (type 8377 61003-1 Industrial-process control systems - Instruments with analogue inputs and twoor multi-position outputs - Part 1: Methods 2004 IEC 0 for evaluating performance - Edition 3.0 8378 61000-4-11 ELECTROMAGNETIC COMPATIBILITY (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short 2004 IEC 0 interruptions and voltage variations immunity tests - Edition 2.1 8379 61285 Industrial-process control - Safety of analyser houses - Edition 3.0 2004 IEC 0 8380 61337-1 Filters using waveguide type dielectric resonators Part 1: Generic specification - Edition 1.0; Supersedes IEC 61337-1- 2004 IEC 0 1:1995 and IEC 61337-1-2:1999 8381 61337-2 Filters using waveguide type dielectric resonators Part 2: Guidance for use - Edition 1.0 2004 IEC 0 8382 61338-1 Waveguide type dielectric resonators Part 1: Generic specification - Edition 1.0; Supersedes IEC 61338-1-1: 1996 and IEC 2004 IEC 0 61338-1-2: 1998 8383 61223-3-5 Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance of 2004 IEC 0 computed tomography X-ray equipment - Edition 1.0 8384 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture 2004 IEC 0 testing in air - Edition 2.0 8385 61221 NULL 2004 IEC 0 8386 61196-4 Coaxial communication cables Part 4: Sectional specification for radiating cables - Edition 3.0 2004 IEC 0 8387 60684-3-165 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 165: Extruded polyolefin, flame 2004 IEC 0 retarded, limited fire hazard sleeving - Edition 1.0 8388 60684-3-228 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 228: Heat-shrinkable, semi-rigid 2004 IEC 0 polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 - Edition 2.0 8389 60670-21 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 21: Particular 2004 IEC 0 requirements for boxes and enclosures with provision for suspension means - Edition 1.0 8390 60669-2-4 Switches for household and similar fixed electrical installations Part 2-4: Particular requirements Isolating switches - 2004 IEC 0 Edition 1.0 8391 60645-5 Electroacoustics Audiometric equipment Part 5: Instruments for the measurement of aural acoustic impedance/admittance - 2004 IEC 0 Edition 1.0 8392 60641-2 Pressboard and presspaper for electrical purposes Part 2: Methods of tests - Edition 2.0 2004 IEC 0 8393 60709 Nuclear power plants Instrumentation and control systems important to safety Separation - Edition 2.0 2004 IEC 0 8394 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and 2004 IEC 0 guidance - Edition 2.0 8395 60749-24 Semiconductor devices - Mechanical and climatic test methods - Part 24: Accelerated moisture resistance - Unbiased HAST 2004 IEC 0 - Edition 1.0; Replaces IEC PAS 62336:2002 8396 60749-33 Semiconductor devices - Mechanical and climatic test methods - Part 33: Accelerated moisture resistance - Unbiased 2004 IEC 0 autoclave - Edition 1.0; Replaces IEC PAS 62172:2000 8397 60774-5 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS Part 5: D-VHS - Edition 1.0 2004 IEC 0 8398 60774-5(2 NULL 2004 IEC 0 8399 60747-8-4 NULL 2004 IEC 0 8400 60747-16-10 Semiconductor devices Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits - 2004 IEC 0 Edition 1.0 8401 60939-2-1 Complete filter units for radio interference suppression Part 2-1: Blank detail specification Passive filter units for 2004 IEC 0 electromagnetic interference suppression Filters for which safety tests are required (assessment level D/DZ) - Edition 1.0 8402 60939-2-2 Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for 2004 IEC 0 electromagnetic interference suppression Filters for which safety tests are required (safety tests only) - Edition 1.0 8403 60901 AMD 3 Single-Capped Fluorescent Lamps - Performance Specifications - Edition 2.3 Consolidated Reprint 2004 IEC 0 8404 60893-1 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: 2004 IEC 0 Definitions, designations and general requirements - Edition 2.0 8405 60896-21 Stationary lead-acid batteries Part 21: Valve regulated types Methods of test - Edition 1.0; Replaces IEC 60896-2:1995 2004 IEC 0 8406 60896-22 Stationary lead-acid batteries Part 22: Valve regulated types Requirements - Edition 1.0 2004 IEC 0 8407 60998-2-4 Connecting Devices for Low-Voltage Circuits for Household and Similar Purposes Part 2-4: Particular Requirements for 2004 IEC 0 Twist-On Connecting Devices - Edition 2.0 8408 60981 Extra-Heavy Duty Electrical Rigid Steel Conduits - Edition 2.0 2004 IEC 0 8409 60952-3 Aircraft batteries Part 3: Product specification and declaration of design and performance (DDP) - Edition 3.0 2004 IEC 0 8410 60952-1 Aircraft batteries Part 1: General test requirements and performance levels - Edition 3.0 2004 IEC 0 8411 60952-2 Aircraft batteries Part 2: Design and construction requirements - Edition 3.0 2004 IEC 0 8412 60873-2 Electrical and pneumatic analogue chart recorders for use in industrial process control systems Part 2: Guidance for 2004 IEC 0 inspection and routine testing - Edition 1.0 8413 60811-5-1 NULL 2004 IEC 0 8414 60825-12 Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information - 2004 IEC 0 Edition 1.0 8415 60811-4-1 NULL 2004 IEC 0 8416 60811-4-2 NULL 2004 IEC 0 8417 60809 AMD 3 NULL 2004 IEC 0 8418 60247 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan) and d.c. resistivity - Edition 3.0 2004 IEC 0 8419 60214-2 Tap-changers Part 2: Application guide - Edition 1.0; Supersedes IEC 60542:1976 and its Amendement 1:1988 2004 IEC 0 8420 60228 Conductors of Insulated Cables - Edition 3.0 2004 IEC 0 8421 60297-3-101 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3- 2004 IEC 0 101: Subracks and associated plug-in units - Edition 1.0; Replaces IEC 60297-3, IEC 60297-4, IEC 60297-5-100, IEC 60297-5-102, IEC 602 8422 60297-3-103 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3- 2004 IEC 0 103: Keying and alignment pin - Edition 1.0; Replaces IEC 60297-5-104 and 60297-5-105 8423 60300-3-2 Dependability management Part 3-2: Application guide Collection of dependability data from the field - Edition 2.0 2004 IEC 0 8424 60300-3-3 Dependability management Part 3-3: Application guide Life cycle costing - Edition 3.0 2004 IEC 0 8425 60300-3-14 Dependability management - Part 3-14: Application guide - Maintenance and maintenance support - Edition 1.0 2004 IEC 0 8426 60300-2 NULL 2004 IEC 0 8427 60310 Railway applications - Traction transformers and inductors on board rolling stock - Edition 4.0 2004 IEC 0 8428 60286-6 Packaging of components for automatic handling Part 6: Bulk case packaging for surface mounting components - Edition 2004 IEC 0 2.0 8429 60143-1 Series capacitors for power systems Part 1: General - Edition 5.0 2004 IEC 0 8430 60191-2 AMD Amendment 10 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2004 IEC 0 10 8431 60191-2 AMD Amendment 11 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2004 IEC 0 11 8432 60068-2-58 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization 2004 IEC 0 and to soldering heat of surface mounting devices (SMD) - Edition 4.0 8433 60062 Marking codes for resistors and capacitors - Edition 6.0 2004 IEC 0 8434 60076-11 Power transformers Part 11: Dry-type transformers - Edition 1.0 2004 IEC 0 8435 60092-351 NULL 2004 IEC 0 8436 60050-141 International Electrotechnical Vocabulary Part 141: Polyphase systems and circuits - Edition 1.0; Replaces IEC 60050- 2004 IEC 0 131A: 1982 8437 60050-482 International Electrotechnical Vocabulary Part 482: Primary and secondary cells and batteries - Edition 1.0 2004 IEC 0 8438 60034-11 Rotating electrical machines Part 11: Thermal protection - Edition 2.0 2004 IEC 0 8439 60050-826 International Electrotechnical Vocabulary - Chapter 826: Electrical Installations - Edition 2.0 2004 IEC 0 8440 60050-841 International Electrotechnical Vocabulary Part 841: Industrial electroheat - Edition 2.0 2004 IEC 0 8441 60332-2-1 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single 2004 IEC 0 small insulated wire or cable Apparatus - Edition 1.0 8442 60332-2-2 Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single 2004 IEC 0 small insulated wire or cable Procedure for diffusion flame - Edition 1.0; Replaces IEC 60332-2:1989 8443 60332-1-1 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single 2004 IEC 0 insulated wire or cable Apparatus - Edition 1.1 8444 60332-1-2 Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single 2004 IEC 0 insulated wire or cable Procedure for 1 kW pre-mixed flame - Edition 1.1 Consolidated Reprint 8445 60332-1-3 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single 2004 IEC 0 insulated wire or cable Procedure for determination of flaming droplets/particles - Edition 1.1 Consolidated Reprint 8446 60384-21-1 Fixed capacitors for use in electronic equipment Part 21-1: Blank detail specification: Fixed surface mount multilayer 2004 IEC 0 capacitors of ceramic dielectric, Class 1 Assessment level EZ - Edition 1.0 8447 60384-21-1 Fixed capacitors for use in electronic equipment Part 21-1: Blank detail specification: Fixed surface mount multilayer 2004 IEC 0 CORR 1 capacitors of ceramic dielectric, Class 1 Assessment level EZ CORRIGENDUM 1 - Edition 1.0 8448 60384-14-3 NULL 2004 IEC 0 8449 60384-22-1 Fixed capacitors for use in electronic equipment Part 22-1: Blank detail specification: Fixed surface mount multilayer 2004 IEC 0 capacitors of ceramic dielectric, Class 2 Assessment level EZ - Edition 1.0 8450 60384-22-1 Fixed capacitors for use in electronic equipment Part 22-1: Blank detail specification: Fixed surface mount multilayer 2004 IEC 0 CORR 1 capacitors of ceramic dielectric, Class 2 Assessment level EZ CORRIGENDUM 1 - Edition 1.0 8451 60404-8-1 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials - Edition 3.0 2004 IEC 0 8452 60404-1-1 Magnetic materials Part 1-1: Classification Surface insulations of electrical steel sheet, strip and laminations - Edition 1.0 2004 IEC 0 8453 60364-7-703 Electrical installations of buildings Part 7-703: Requirements for special installations or locations Rooms and cabins 2004 IEC 0 containing sauna heaters - Edition 2.0 8454 60371-2 Specification for insulating materials based on mica Part 2: Methods of test - Edition 3.0 2004 IEC 0 8455 60384-14-2 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagnetic 2004 IEC 0 interference suppression and connection to the supply mains Safety tests only - Edition 2.0 8456 60512-25-5 Connectors for electronic equipment Tests and measurements Part 25-5: Test 25e Return loss - Edition 1.0 2004 IEC 0 8457 60512-25-6 Connectors for electronic equipment Tests and measurements Part 25-6: Test 25f: Eye pattern and jitter - Edition 1.0 2004 IEC 0 8458 60512-25-7 Connectors for electronic equipment Tests and measurements Part 25-7: Test 25g Impedance, reflection coefficient, and 2004 IEC 0 voltage standing wave ratio (VSWR) - Edition 1.0 8459 60444-7 Measurement of quartz crystal unit parameters . Part 7: Measurement of activity and frequency dips of quartz crystal units - 2004 IEC 0 Edition 1.0 8460 60447 Basic and safety principles for man-machine interface, marking and identification Actuating principles - Edition 3.0 2004 IEC 0 8461 60488-1 Higher performance protocol for the standard digital interface for programmable instrumentation Part 1: General - Edition 2004 IEC 0 1.0 8462 60488-2 Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands - 2004 IEC 0 Edition 1.0 8463 60480 Guidelines for the checking and treatment of sulfur hexafluoride (SF6 ) taken from electrical equipment and specification 2004 IEC 0 for its re-use - Edition 2.0 8464 60534-5 Industrial-process control valves Part 5: Marking - Edition 2.0 2004 IEC 0 8465 60609-1 Hydraulic turbines, storage pumps and pump-turbines Cavitation pitting evaluation Part 1: Evaluation in reaction turbines, 2004 IEC 0 storage pumps and pump-turbines - Edition 1.0 8466 60601-2-17 Medical electrical equipment Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy 2004 IEC 0 afterloading equipment - Edition 3.0 8467 TS 62367 Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line) - 2004 IEC 0 Edition 1.0 8468 TS 62370 Electroacoustics Instruments for the measurement of sound intensity Electromagnetic and electrostatic compatibility 2004 IEC 0 requirements and test procedures - Edition 1.1 Consolidated Reprint 8469 TS 62398 Ferrite cores Technology approval schedule (TAS) - Edition 1.0; QC 210018 2004 IEC 0 8470 61076-3-118 Connectors for electronic equipment Product requirements Part 3-118: Rectangular connectors Detail specification for a 4 2004 IEC 0 pole plus PE power connector with push-pull coupling - Edition 1.0 8471 TS 61827 Electrical installations for lighting and beaconing of aerodromes Characteristics of inset and elevated luminaires used on 2004 IEC 0 aerodromes and heliports - Edition 1.0 8472 TS 61970-2 Energy management system application program interface (EMS-API) Part 2: Glossary - Edition 1.0 2004 IEC 0 8473 TS 62257-2 Recommendations for renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range 2004 IEC 0 of electrification systems - Edition 2.0 8474 TS 62257-3 Recommendations for renewable energy and hybrid systems for rural electrification Part 3: Project development and 2004 IEC 0 management - Edition 2.0 8475 TS 62100 Cables for aeronautical ground lighting primary circuits - Edition 1.0 2004 IEC 0 8476 TR 62380 Reliability data handbook Universal model for reliability prediction of electronics components, PCBs and equipment - 2004 IEC 0 Edition 1.0 8477 TR 61908 The technology roadmap for industry data dictionary structure, utilization and implementation - Edition 1.0 2004 IEC 0 8478 TR 62051-1 Electricity metering Data exchange for meter reading, tariff and load control Glossary of terms Part 1: Terms related to 2004 IEC 0 data exchange with metering equipment using DLMS/COSEM - Edition 1.0 8479 TR 61292-5 Optical amplifiers Part 5: Polarization mode dispersion parameter General information - Edition 1.0 2004 IEC 0 s guide - Edition 1.0 2004 IEC 0_آTR 60825-14 Safety of laser products Part 14: A user 8480 8481 TR 60788 Medical electrical equipment Glossary of defined terms - Edition 2.0 2004 IEC 0 8482 TR 60071-4 Insulation co-ordination Part 4: Computational guide to insulation co-ordination and modelling of electrical networks - 2004 IEC 0 Edition 1.0 8483 TR 61000-1-5 Electromagnetic compatibility (EMC) Part 1-5: General High power electromagnetic (HPEM) effects on civil systems - 2004 IEC 0 Edition 1.0 8484 TR 61131-4 Programmable Controllers - Part 4: User Guidelines First Edition - Edition 2.0 2004 IEC 0 8485 IECEX TR NULL 2004 IEC 0 60079-26 8486 IECEX TR NULL 2004 IEC 0 61241-1 8487 PAS 60099-7 Surge arresters Part 7: Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 2004 IEC 0 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341 - Edition 1.0 8488 PAS 60099-7(2 NULL 2004 IEC 0 8489 ISO 8824-1 NULL 2004 IEC 0 CORR 1 8490 CISPR.TR 29 NULL 2004 IEC 0 8491 CISPR-TR 29 NULL 2004 IEC 0 8492 GUIDE 111 Electrical High-Voltage Equipment in High-Voltage Substations - Common Recommendation for Product Standards - 2004 IEC 0 Edition 2.0 8493 CISPR 16-1-3 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-3: Radio disturbance and 2004 IEC 0 immunity measuring apparatus Ancillary equipment Disturbance power - Edition 2.1; Consolidated Reprint 8494 81714-3 Design of Graphical Symbols for Use in the Technical Documentation of Products - Part 3: Classification of Connect 2004 IEC 0 Nodes, Networks and Their Encoding - Edition 2.0 8495 88528-11 Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power 2004 IEC 0 systems - Performance requirements and test methods - Edition 1.0 8496 82045-2 Document management Part 2: Metadata elements and information reference model - Edition 1.0; Includes Access to 2004 IEC 0 Additional Content 8497 62124 Photovoltaic (PV) stand-alone systems Design verification - Edition 1.0 2004 IEC 0 8498 62138 Nuclear power plants Instrumentation and control important for safety Software aspects for computer-based systems 2004 IEC 0 performing category B or C functions - Edition 1.0 8499 62148-12 Fibre optic active components and devices Package and interface standards Part 12: Laser transmitters with a coaxial RF 2004 IEC 0 connector - Edition 1.0 8500 62137 NULL 2004 IEC 0 8501 62149-3 Fibre optic active components and devices Performance standards Part 3: Modulator-integrated laser diode transmitters for 2004 IEC 0 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems - Edition 2.0 8502 62199 NULL 2004 IEC 0 8503 62241 Nuclear power plants Main control room Alarm functions and presentation - Edition 1.0 2004 IEC 0 8504 62226-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current 2004 IEC 0 density and internal electric field induced in the human body Part 1: General - Edition 1.0 8505 62226-2-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current 2004 IEC 0 density and internal electric field induced in the human body Part 2-1: Exposure to magnetic fields 2D models - Edition 1.0 8506 62252 NULL 2004 IEC 0 8507 62264-2 Enterprise-control system integration Part 2: Objects and attributes for enterprise-control system integration - Edition 2.0 2004 IEC 0 8508 62270 Guide for computer-based control for hydroelectric power plant automation - Edition 2.0 2004 IEC 0 8509 62300 Consumer audio/video equipment digital interface with plastic optical fibre - Edition 1.0 2004 IEC 0 8510 62309 Dependability of products containing reused parts Requirements for functionality and tests - Edition 1.0 2004 IEC 0 8511 62375 Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval Analogue interface - 2004 IEC 0 Edition 1.0 8512 61959 Secondary cells and batteries containing alkaline or other non-acid electrolytes Mechanical tests for sealed portable 2004 IEC 0 secondary cells and batteries - Edition 1.0 8513 61937-7 Digital audio Interface for non-linear PCM encoded audio bitstreams applying to IEC 60958 Part 7: Non-linear PCM 2004 IEC 0 bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats - Edition 2.1; Consolidated Reprint 8514 61937-4 CORR Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 4: Non-linear PCM 2004 IEC 0 1 bitstreams according to the MPEG audio format CORRIGENDUM 1 - Edition 1.0 8515 61920 Infrared free air applications - Edition 2.0 2004 IEC 0 8516 61883-2 Consumer audio/video equipment Digital interface Part 2: SD-DVCR data transmission - Edition 2.0 2004 IEC 0 8517 61883-3 Consumer audio/video equipment - Digital interface - Part 3: HD-DVCR data transmission - Edition 2.0 2004 IEC 0 8518 61883-4 Consumer audio/video equipment Digital interface Part 4: MPEG2-TS data transmission - Edition 2.0 2004 IEC 0 8519 61883-5 Consumer audio/video equipment - Digital interface - Part 5: SDL-DVCR data transmission - Edition 2.0 2004 IEC 0 8520 61837-4 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead 2004 IEC 0 connections - Part 4: Hybrid enclosure outlines - Edition 2.0 8521 61817 Household portable appliances for cooking, grilling and similar use Methods for measuring performance - Edition 1.1 2004 IEC 0 Consolidated Reprint 8522 62022 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials 2004 IEC 0 transported by vehicles - Edition 1.0 8523 62022(2 NULL 2004 IEC 0 8524 62011-2 Insulating materials Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based 2004 IEC 0 on thermosetting resins for electrical purposes Part 2: Methods of test - Edition 1.0 8525 62005-7 Reliability of fibre optic interconnecting devices and passive optical components Part 7: Life stress modeling - Edition 1.0 2004 IEC 0 8526 61968-3 Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network 2004 IEC 0 operations - Edition 2.0 8527 62054-11 Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers - 2004 IEC 0 Edition 1.1 Consolidated Reprint 8528 62052-21 Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 21: Tariff and load control 2004 IEC 0 equipment - Edition 1.1 Consolidated Reprint 8529 62054-21 Electricity metering (AC) Tariff and load control Part 21: Particular requirements for time switches - Edition 1.1; 2004 IEC 0 Consolidated Reprint 8530 61727 Photovoltaic (PV) Systems - Characteristics of the Utility Interface - Edition 2.0 2004 IEC 0 8531 61747-4-1 Liquid crystal display devices Part 4-1: Matrix colour LCD modules Essential ratings and characteristics - Edition 2.0 2004 IEC 0 8532 61747-2-2 Liquid crystal display devices Part 2-2: Matrix colour LCD modules Blank detail specification - Edition 2.0 2004 IEC 0 8533 61603-2 Transmission of audio and/or video and related signals using infra-red radiation Part 2: Transmission systems for audio 2004 IEC 0 wide band and related signals - Edition 1.1 Consolidated Reprint 8534 61603-2(2 NULL 2004 IEC 0 8535 61643-22 Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling 2004 IEC 0 networks - Selection and application principles - Edition 2.0 8536 61514-2 Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with 2004 IEC 0 pneumatic outputs mounted on an actuator valve assembly - Edition 2.0 8537 61523-3 Delay and Power Calculation Standards - Part 3: Standard Delay Format (SDF) for the electronic design process - Edition 2004 IEC 0 1.0 8538 61511-1 CORR FUNCTIONAL SAFETY SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR Part 1: 2004 IEC 0 1 Framework, definitions, system, hardware and application programming requirements - Edition 2.0 8539 61481 NULL 2004 IEC 0 8540 61582 Radiation protection instrumentation In vivo counters Classification, general requirements and test procedures for portable, 2004 IEC 0 transportable and installed equipment - Edition 1.0 8541 61338-2 Waveguide type dielectric resonators Part 2: Guidelines for oscillator and filter applications - Edition 1.0 2004 IEC 0 8542 61340-4-5 Electrostatics Part 4-5: Standard test methods for specific applications Methods for characterizing the electrostatic 2004 IEC 0 protection of footwear and flooring in combination with a person - Edition 1.0 8543 61360-5 NULL 2004 IEC 0 8544 61360-5(2 NULL 2004 IEC 0 8545 61386-24 Conduit systems for cable management Part 24: Particular requirements Conduit systems buried underground - Edition 1.0 2004 IEC 0 8546 61478 Live working Ladders of insulating material - Edition 1.1 Consolidated Reprint 2003 IEC 0 8547 61340-4-1 Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed 2003 IEC 0 floors - Edition 2.1; Consolidated Reprint 8548 61511-2 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of 2003 IEC 0 IEC 61511-1: 2016 - Edition 2.0 8549 61511-1 Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, 2003 IEC 0 hardware and application programming requirements - Edition 2.0 8550 61511-3 Functional safety Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the 2003 IEC 0 required safety integrity levels - Edition 2.0 8551 61672-2 Electroacoustics Sound level meters Part 2: Pattern evaluation tests - Edition 2.1 Consolidated Reprint 2003 IEC 0 8552 61643-331 Components for low-voltage surge protective devices Part 331: Specification for metal oxide varistors (MOV) - Edition 1.0 2003 IEC 0 8553 61603-7 Transmission systems of audio and/or video and related signals using infra-red radiation Part 7: Digital audio signals for 2003 IEC 0 conference and similar applications - Edition 1.0 8554 61603-8-1 Transmission of audio and/or video and related signals using infrared radiation Part 8-1: Digital audio and related signals - 2003 IEC 0 Edition 1.0 8555 61747-1 NULL 2003 IEC 0 8556 61754-4-1 NULL 2003 IEC 0 8557 61754-6-1 NULL 2003 IEC 0 8558 62053-11 Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy 2003 IEC 0 (classes 0,5, 1 and 2) - Edition 1.1 8559 62053-21 Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) - 2003 IEC 0 Edition 1.1, Consolidated Reprint 8560 62053-22 Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 2003 IEC 0 S) - Edition 1.1 Consolidated Reprint 8561 62053-23 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) - 2003 IEC 0 Edition 1.1 Consolidated Reprint 8562 62052-11 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment - 2003 IEC 0 Edition 1.1; Consolidate Reprint 8563 62103 NULL 2003 IEC 0 8564 62104 Characteristics of DAB Receivers - Edition 3.0 2003 IEC 0 8565 61966-9 Multimedia systems and equipment Colour measurement and management Part 9: Digital cameras - Edition 2.0 2003 IEC 0 8566 61967-5 Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 5: Measurement of conducted 2003 IEC 0 emissions Workbench Faraday Cage method - Edition 1.0 8567 61988-2-2 NULL 2003 IEC 0 8568 62011-3-1 Insulating materials Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on 2003 IEC 0 thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials Tubes and rods of rectangular and hex 8569 62018 Power consumption of information technology equipment Measurement methods - Edition 1.0 2003 IEC 0 8570 62019 Electrical accessories - Circuit-breakers and similar equipment for household use - auxiliary contact units - Edition 1.1; 2003 IEC 0 Consolidated Reprint 8571 62020 Electrical accessories Residual current monitors for household and similar uses (RCMs) - Edition 1.1; Consolidated Reprint 2003 IEC 0 8572 62021-1 Insulating liquids Determination of acidity Part 1: Automatic potentiometric titration - Edition 1.0 2003 IEC 0 8573 61883-7 Consumer audio/video equipment Digital interface Part 7: Transmission of ITU-R BO.1294 System B - Edition 1.0 2003 IEC 0 8574 61855 Household electrical hair care appliances Methods of measuring the performance - Edition 1.0 2003 IEC 0 8575 61921 Power capacitors Low-voltage power factor correction banks - Edition 1.0 2003 IEC 0 8576 61937-4 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 4: Non-linear PCM 2003 IEC 0 bitstreams according to the MPEG audio format - Edition 1.0 8577 61966-2-2 Multimedia systems and equipment Colour measurement and management Part 2-2: Colour management Extended RGB 2003 IEC 0 colour space - scRGB - Edition 1.0 8578 61966-2-2 Multimedia systems and equipment Colour measurement and management Part 2-2 Colour management Extended RGB 2003 IEC 0 CORR 1 colour space - scRGB CORRIGENDUM 1 - Edition 1.0 8579 61965 Mechanical Safety of Cathode Ray Tubes - Edition 2.0 2003 IEC 0 8580 62330-1 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 1: VTR 2003 IEC 0 specifications - Edition 1.0 8581 62330-2 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 2: 2003 IEC 0 Compression format - Edition 1.0 8582 62330-3 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 3: Data 2003 IEC 0 stream format - Edition 1.0 8583 62356-1 Video recording 12,65 mm TYPE D-11 format Part 1: Tape recording - Edition 1.0 2003 IEC 0 8584 62356-2 Video recording 12,65 mm Type D-11 format Part 2: Picture compression and data stream - Edition 1.0 2003 IEC 0 8585 62356-3 Video recording 12,65 mm type D-11 format Part 3: Data mapping over SDTI - Edition 1.0 2003 IEC 0 8586 62315-1 DTV profiles for uncompressed digital video interfaces Part 1: General - Edition 1.0 2003 IEC 0 8587 62286 Service diagnostic interface for consumer electronics products and networks Implementation for IEEE 1394 - Edition 1.0 2003 IEC 0 8588 62259 Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single 2003 IEC 0 cells with partial gas recombination - Edition 1.0 8589 62237 Live working Insulating hoses with fittings for use with hydraulic tools and equipment - Edition 1.0 2003 IEC 0 8590 62238 Maritime navigation and radiocommunication equipment and systems VHF radiotelephone equipment incorporating Class 2003 IEC 0 "D" Digital Selective Calling (DSC) Methods of testing and required test results - Edition 1.0 8591 62255-1 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access 2003 IEC 0 telecommunication networks) Outside plant cables Part 1: Generic specification - Edition 1.0 8592 62220-1 NULL 2003 IEC 0 8593 62211 Inductive components Reliability management - Edition 1.0 2003 IEC 0 8594 62193 Live working Telescopic sticks and telescopic measuring sticks - Edition 1.0 2003 IEC 0 8595 62155 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages 2003 IEC 0 greater than 1 000 V - Edition 1.0; Replaces IEC 60233: 1974 and IEC 61264: 1998 8596 62153-1-1 Metallic communication cables test methods Part 1-1: Electrical Measurement of the pulse/step return loss in the frequency 2003 IEC 0 domain using the Inverse Discrete Fourier Transformation (IDFT) - Edition 1.0; Replaces IEC PAS 62260 8597 62153-4-2 Metallic communication cables test methods Part 4-2: Electromagnetic compatibility (EMC) Screening and coupling 2003 IEC 0 attenuation Injection clamp method - Edition 1.0 8598 62149-6 Fibre optic active components and devices Performance standards Part 6: 650-nm 250-Mbit/s plastic optical fibre 2003 IEC 0 transceivers - Edition 1.0 8599 62148-4 Fibre optic active components and devices Package and interface standards Part 4: PN 1 9 plastic optical transceivers - 2003 IEC 0 Edition 1.0 8600 62148-5 Fibre optic active components and devices Package and interface standards Part 5: SC 1x9 fibre optic modules - Edition 1.0 2003 IEC 0 8601 62148-6 Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers - Edition 1.0 2003 IEC 0 8602 62128-2 Railway applications Fixed installations Electrical safety, earthing and the return circuit Part 2: Provisions against the 2003 IEC 0 effects of stray currents caused by d.c. traction systems - Edition 2.0 8603 62128-1 Railway applications Fixed installations Electrical safety, earthing and the return circuit Part 1: Protective provisions 2003 IEC 0 against electric shock - Edition 2.0 8604 CISPR 16-2-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement of 2003 IEC 0 disturbances and immunity Immunity measurements - Edition 1.0; Together with CISPR 16-2-1, CISPR 16-2-2 and CISPR 16-2-3:2003, Replaces CI 8605 CISPR-TR 31 NULL 2003 IEC 0 8606 CISPR.TR 31 NULL 2003 IEC 0 8607 IECEX TR NULL 2003 IEC 0 60079-25 8608 TR 61131-8 Programmable Controllers - Part 8: Guidelines for the Application and Implementation of Programming Languages - 2003 IEC 0 Edition 2.0 8609 TR 60893-4 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical 2003 IEC 0 values - Edition 2.0 8610 TR 60878 Graphical symbols for electrical equipment in medical practice - Edition 3.0 2003 IEC 0 8611 TR 60721-4-1 Classification of Environmental Conditions - Part 4-1: Guidance for the Correlation and Transformation of Environmental 2003 IEC 0 Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Storage - Edition 1.1 Consolidated Reprint 8612 TR 60721-4-2 Classification of environmental conditions Part 4-2: Guidance for the correlation and transformation of environmental 2003 IEC 0 condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation - Edition 1.1 Consolidated Reprint 8613 TR 60721-4-3 Classification of environmental conditions Part 4-3: Guidance for the correlation and transformation of environmental 2003 IEC 0 condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations - Edition 1.1 Conso 8614 TR 60721-4-4 Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental 2003 IEC 0 condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations - Edition 1 8615 TR 60721-4-5 Classification of Environmental Conditions - Part 4-5: Guidance for the Correlation and Transformation of Environmental 2003 IEC 0 Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ground Vehicle Installations - Edition 1.1 Consolidated Repr 8616 TR 60721-4-6 Classification of Environmental Conditions - Part 4-6: Guidance for the Correlation and Transformation of Environmental 2003 IEC 0 Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ship Environment - Edition 1.1 Consolidated Reprint 8617 TR 60721-4-7 Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental 2003 IEC 0 condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use - Edition 1.1 Consolidated R s Checklist for IEC 60825-1 - Edition 2.0 2003 IEC 0_آTR 60825-5 Safety of Laser Products - Part 5: Manufacturer 8618 8619 TR 61282-6 Fibre optic communication system design guides Part 6: Skew design in parallel optical interconnection systems - Edition 2003 IEC 0 1.0 8620 TR 61282-7 Fibre Optic Communication System Design Guides - Part 7: Statistical Calculation of Chromatic Dispersion - Edition 1.0 2003 IEC 0 8621 TR 61282-2 NULL 2003 IEC 0 8622 TR 61282-4 Fibre optic communication system design guides Part 4: Accommodation and utilization of non-linear effects - Edition 2.0 2003 IEC 0 8623 TR 61292-2 Optical Amplifier Technical Reports - Part 2: Theoretical Background for Noise Figure Evaluation Using the Electrical 2003 IEC 0 Spectrum Analyzer - Edition 1.0 8624 TR 61292-3 Optical amplifiers Part 3: Classification, characteristics and applications - Edition 1.0 2003 IEC 0 8625 TR 61328 Live working - Guidelines for the installation of transmission and distribution line conductors and earth wires - Stringing 2003 IEC 0 equipment and accessory items - Edition 3.0 8626 TR 61800-6 Adjustable speed electrical power drive systems Part 6: Guide for determination of types of load duty and corresponding 2003 IEC 0 current ratings - Edition 1.0; Replaces IEC 61136-1: 1992 8627 TR 61592 Household Electrical Appliances - Guidelines for Consumer Panel Testing - Edition 2.0 2003 IEC 0 8628 TR 61911 NULL 2003 IEC 0 8629 TR 62247 NULL 2003 IEC 0 8630 TR 62247(2 NULL 2003 IEC 0 8631 TR 62251 Multimedia systems and equipment Quality assessment Audio-video communication systems - Edition 1.0 2003 IEC 0 8632 TR 62095 Electric cables Calculations for current ratings Finite element method - Edition 1.0 2003 IEC 0 8633 TR 62188 Secondary cells and batteries containing alkaline or other non-acid electrolytes Design and manufacturing 2003 IEC 0 recommendations for portable batteries made from sealed secondary cells - Edition 1.0 8634 TR 62210 Power system control and associated communications Data and communication security - Edition 1.0 2003 IEC 0 8635 TR 62284 Effective Area Measurements of Single-Mode Optical Fibres - Guidance - Edition 1.0 2003 IEC 0 8636 TS 60034-23 Rotating electrical machines Part 23: Specification for the refurbishing of rotating electrical machines - Edition 1.0 2003 IEC 0 8637 TS 60695-5-3 NULL 2003 IEC 0 8638 TS 62073 Guidance on the measurement of hydrophobicity of insulator surfaces - Edition 2.0 2003 IEC 0 8639 TS 62257-1 Recommendations for renewable energy and hybrid systems for rural electrification Part 1: General introduction to IEC 2003 IEC 0 62257 series and rural electrification - Edition 3.0 8640 TS 61850-2 Communication networks and systems in substations Part 2: Glossary - Edition 1.0 2003 IEC 0 8641 TS 61804-1 Function blocks (FB) for process control Part 1: Overview of system aspects - Edition 1.0; Replaces IEC PAS 61804-1 2003 IEC 0 8642 TS 62318 Multimedia systems and equipment Multimedia home server systems Home server conceptual model - Edition 1.0 2003 IEC 0 8643 60544-4 Electrical insulating materials Determination of the effects of ionizing radiation Part 4: Classification system for service in 2003 IEC 0 radiation environments - Edition 2.0 8644 60570 Electrical supply track systems for luminaires - Edition 4.1; Consolidated Reprint 2003 IEC 0 8645 60534-2-5 NULL 2003 IEC 0 8646 60598-2-10 Luminaires Part 2-10: Particular requirements Portable luminaires for children - Edition 2.0 2003 IEC 0 8647 60512-10-4 Connectors for electronic equipment Tests and measurements Part 10-4: Impact tests (free components), static load tests 2003 IEC 0 (fixed components), endurance tests and overload tests Test 10d: Electrical overload (connectors) - Edition 2.0 8648 60455-3-1 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 1: 2003 IEC 0 Unfilled epoxy resinous compounds - Edition 2.0 8649 60455-3-2 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 2: Quartz 2003 IEC 0 filled epoxy resinous compounds - Edition 2.0 8650 60455-3-3 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 3: 2003 IEC 0 Unfilled polyurethane compounds - Edition 2.0 8651 60455-3-4 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 4: Filled 2003 IEC 0 polyurethane compounds - Edition 2.0 8652 60454-3-19 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes 2003 IEC 0 made from various backing materials with pressure-sensitive adhesive on both sides - Edition 1.0 8653 60444-8 Measurement of quartz crystal unit parameters Part 8: Test fixture for surface mounted quartz crystal units - Edition 2.0 2003 IEC 0 8654 60442 Electric toasters for household and similar purposes Methods for measuring the performance - Edition 2.1 Consolidated 2003 IEC 0 Reprint 8655 60512-2-2 Connectors for electronic equipment Tests and measurements Part 2-2: Electrical continuity and contact resistance tests 2003 IEC 0 Test 2b: Contact resistance Specified test current method - Edition 1.0 8656 60512-11-7 Connectors for electronic equipment Tests and measurements Part 11-7: Climatic tests Test 11g: Flowing mixed gas 2003 IEC 0 corrosion test - Edition 2.0 8657 60512-11-14 Connectors for electronic equipment - Tests and measurements Part 11-14: Climatic tests Test 11p: Flowing single gas 2003 IEC 0 corrosion test - Edition 2.0 8658 60512-2-5 Connectors for electronic equipment Tests and measurements Part 2-5: Electrical continuity and contact resistance tests 2003 IEC 0 Test 2e: Contact disturbance - Edition 1.0 8659 60512-4-1 Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof - Edition 2003 IEC 0 1.0 8660 60529 CORR 1 Degrees of Protection Provided by Enclosures (IP Code) - Edition 2.2 2003 IEC 0 8661 60375 Conventions concerning electric and magnetic circuits - Edition 2.0 2003 IEC 0 8662 60375(2 NULL 2003 IEC 0 8663 60371-1 Specification for Insulating Materials Based on Mica Part 1: Definitions and General Requirements - Edition 3.0 2003 IEC 0 8664 60335-2-99 Household and similar electrical appliances Safety Part 2-99: Particular requirements for commercial electric hoods - 2003 IEC 0 Edition 1.0 8665 60393-6-1 Potentiometers for use in electronic equipment Part 6-1: Blank detail specification: Surface mount preset potentiometers 2003 IEC 0 Assessment level E - Edition 1.0 8666 60401-3 Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in 2003 IEC 0 manufacturers catalogues of transformer and inductor cores - Edition 2.0 8667 60404-6 Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder 2003 IEC 0 materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens - Edition 2.0 8668 60393-6 Potentiometers for use in electronic equipment Part 6: Sectional specification Surface mount preset potentiometers - 2003 IEC 0 Edition 2.0 8669 60335-2-92 Household and similar electrical appliances Safety Part 2-92: Particular requirements for pedestrian-controlled mains- 2003 IEC 0 CORR 1 operated lawn scarifiers and aerators CORRIGENDUM 1 - Edition 2.0 8670 60335-2-104 Household and Similar Electrical Appliances - Safety - Part 2-104: Particular Requirements for Appliances to Recover 2003 IEC 0 and/or Recycle Refrigerant from Air Conditioning and Refrigeration Equipment - Edition 1.0 8671 60050-393 NULL 2003 IEC 0 8672 60081 AMD 2 Amendment 2 Double-capped fluorescent lamps Performance specifications - Edition 5.1 2003 IEC 0 8673 60092-354 Electrical installations in ships Part 354: Single- and three-core power cables with extruded solid insulation for rated 2003 IEC 0 voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) - Edition 3.0 8674 60077-4 Railway applications Electric equipment for rolling stock Part 4: Electrotechnical components Rules for AC circuit- 2003 IEC 0 breakers - Edition 1.0 8675 60077-5 Railway applications Electric equipment for rolling stock Part 5: Electrotechnical components Rules for HV fuses - Edition 2003 IEC 0 1.0 8676 60068-3-8 Environmental testing Part 3-8: Supporting documentation and guidance Selecting amongst vibration tests - Edition 1.0 2003 IEC 0 8677 60068-2-81 Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis - Edition 1.0 2003 IEC 0 8678 60068-2-42 Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections - Edition 3.0 2003 IEC 0 8679 60068-2-43 Environmental testing Part 2-43: Tests Test Kd: Hydrogen sulphide test for contacts and connections - Edition 2.0 2003 IEC 0 8680 60191-6-10 Mechanical standardization of semiconductor devices Part 6-10: General rules for the preparation of outline drawings of 2003 IEC 0 surface mounted semiconductor device packages Dimensions of P-VSON - Edition 1.0 8681 60191-6-4 Mechanical standardization of semiconductor devices Part 6-4: General rules for the preparation of outline drawings of 2003 IEC 0 surface mounted semiconductor device packages Measuring methods for package dimensions of ball grid array (BGA) - Edition 1.0 8682 60191-2 AMD Amendment 8 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2003 IEC 0 8 8683 60191-2 AMD Amendment 9 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2003 IEC 0 9 8684 60092-506 Electric Installations in Ships - Part 506: Special Features - Ships Carrying Specific Dangerous Goods and Materials 2003 IEC 0 Hazardous Only in Bulk - Edition 2.0 8685 60092-376 Electrical installations in ships Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) IEC - Edition 2003 IEC 0 3.0 8686 60115-9 Fixed resistors for use in electronic equipment Part 9: Sectional specification: Fixed surface mount resistor networks with 2003 IEC 0 individually measurable resistors - Edition 1.0 8687 60115-9-1 Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification: Fixed surface mount resistor networks 2003 IEC 0 with individually measurable resistors Assessment level EZ - Edition 1.0 8688 60264-4-2 Packaging of Winding Wires Part 4: Methods of Test Section 2: Containers Made from Thermoplastic Material for Taper 2003 IEC 0 AMD 1 Barrelled Delivery Spools - Edition 1.0 8689 60264-2-3 Packaging of winding wires Part 2-3: Cylindrical barrelled delivery spools Specification for non-returnable spools made 2003 IEC 0 AMD 1 from thermoplastic material - Edition 1.0 8690 60264-2-3 NULL 2003 IEC 0 AMD 1(2 8691 60264-2-2 Packaging of Winding Wires - Part 2-2: Cylindrical Barrelled Delivery Spools - Specification for Returnable Spools Made 2003 IEC 0 AMD 1 from Thermoplastic Material - Edition 1.0 8692 60264-2-1 Packaging of winding wires Part 2-1: Cylindrical barrelled delivery spools Basic dimensions - Edition 1.0; Includes 2003 IEC 0 AMD 1 Amendment 1: 7/2003 8693 60300-3-1 Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology - 2003 IEC 0 Edition 2.0 8694 60300-3-5(2 NULL 2003 IEC 0 8695 60300-1 Dependability management Part 1: Guidance for management and application - Edition 3.0 2003 IEC 0 8696 60214-1 Tap-changers Part 1: Performance requirements and test methods - Edition 2.0 2003 IEC 0 8697 60227-2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods - Edition 2.1 2003 IEC 0 Consolidated Reprint 8698 60245-5 AMD Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 5: Lift Cables - Edition 2.0; Includes 2003 IEC 0 1 Amendment 1: 12/2003 8699 60245-6 AMD Amendment 2 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 6: Arc Welding Electrode 2003 IEC 0 2 Cables - Edition 2.0 8700 60794-4 Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines - Edition 1.0 2003 IEC 0 8701 60811-3-2 NULL 2003 IEC 0 AMD 2 8702 60862-1 Surface acoustic wave (SAW) filters of assessed quality Part 1: Generic specification - Edition 3.0 2003 IEC 0 8703 60851-1 AMD Amendment 1 Winding wires - Test methods - Part 1: General - Edition 2.0 2003 IEC 0 1 8704 60873-1 Electrical and pneumatic analogue chart recorders for use in industrialprocess control systems Part 1: Methods for 2003 IEC 0 performance evaluation - Edition 1.0; Replaces IEC 60873 8705 60870-5-101 Telecontrol equipment and systems Part 5-101: Transmission protocols Companion standard for basic telecontrol tasks - 2003 IEC 0 Edition 2.0; Includes Access to Additional Content 8706 60826 Overhead transmission lines - Design criteria - Edition 4.0 2003 IEC 0 8707 60950-21 Information technology equipment Safety Part 21: Remote power feeding CORRIGENDUM 1 - Edition 1.0 2003 IEC 0 CORR 1 8708 60947-5-7 Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for 2003 IEC 0 proximity devices with analogue output - Edition 1.0 8709 60966-2-2 Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies - 2003 IEC 0 Edition 2.0 8710 61000-2-12 Electromagnetic compatibility (EMC) Part 2-12: Environment Compatibility levels for low-frequency conducted 2003 IEC 0 disturbances and signalling in public medium-voltage power supply systems - Edition 1.0 8711 60966-3-2 Radio frequency and coaxial cable assemblies Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for 2003 IEC 0 GSM use (0,8 GHz 1 GHz) - Edition 2.0 8712 60966-4 Radio frequency and coaxial cable assemblies Part 4: Sectional specification for semi-rigid coaxial cable assemblies - 2003 IEC 0 Edition 2.0 8713 60966-4-1 Radio frequency and coaxial cable assemblies Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies - 2003 IEC 0 Edition 2.0 kV d.c. CORRIGENDUM 1 - 2003 IEC 0 600_آ CORR 1 Live working Conductive clothing for use at nominal voltage up to 800 kV a.c. and 60895 8714 Edition 2.0 8715 60898-1 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit- 2003 IEC 0 breakers for a.c. operation - Edition 2.0 8716 60862-3 Surface acoustic wave (SAW) filters of assessed quality Part 3: Standard outlines - Edition 2.0 2003 IEC 0 8717 60893-2 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test - Edition 2.0 2003 IEC 0 8718 60903 CORR 1 NULL 2003 IEC 0 8719 60898-2 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit- 2003 IEC 0 breakers for AC and DC operation - Edition 2.0 8720 60942 Electroacoustics - Sound Calibrators - Edition 3.0 2003 IEC 0 8721 60746-3 CORR Expression of performance of electrochemical analyzers Part 3: Electrolytic conductivity CORRIGENDUM 1 - Edition 2.0 2003 IEC 0 1 8722 60746-1 Expression of Performance of Electrochemical Analyzers Part 1: General - Edition 2.0 2003 IEC 0 8723 60746-2 Expression of performance of electrochemical analyzers Part 2: pH value - Edition 2.0 2003 IEC 0 8724 60746-2 CORR Expression of performance of electrochemical analyzers Part 2: pH value CORRIGENDUM 1 - Edition 2.0 2003 IEC 0 1 8725 60746-2 CORR Expression of performance of electrochemical analyzers Part 2: pH value CORRIGENDUM 2 - Edition 2.0 2003 IEC 0 2 8726 60748-23-5 Semiconductor devices Integrated circuits Part 23-5: Hybrid integrated circuits and film structures Manufacturing line 2003 IEC 0 certification Procedure for qualification approval - Edition 1.0; QC 165000-5 8727 60728-7-2 Cable networks for television signals, sound signals and interactive services Part 7-2: Hybrid Fibre Coax Outside Plant 2003 IEC 0 Status Monitoring Media access Control (MAC) Layer Specification - Edition 1.0 8728 60730-2-8 Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water 2003 IEC 0 valves, including mechanical requirements - Edition 2.2; Consolidated Reprint 8729 60749-4 CORR NULL 2003 IEC 0 1 8730 60749-36 Semiconductor devices Mechanical and climatic test methods Part 36: Acceleration, steady state - Edition 1.0 2003 IEC 0 8731 60749-31 SEMICONDUCTOR DEVICES MECHANICAL AND CLIMATIC TEST METHODS Part 31: Flammability of plastic- 2003 IEC 0 CORR 1 encapsulated devices (internally induced) CORRIGENDUM 1 - Edition 1.0 8732 60749-3 CORR NULL 2003 IEC 0 1 8733 60749-9 CORR NULL 2003 IEC 0 1 8734 60749-6 CORR NULL 2003 IEC 0 1 8735 60749-5 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test - 2003 IEC 0 Edition 2.0 8736 60749-8 CORR Semiconductor devices Mechanical and climatic test methods Part 8: Sealing CORRIGENDUM 1 - Edition 1.0 2003 IEC 0 1 8737 60749-8 CORR SEMICONDUCTOR DEVICES MECHANICAL AND CLIMATIC TEST METHODS Part 8: Sealing CORRIGENDUM 2003 IEC 0 2 2 - Edition 1.0 8738 60749-22 SEMICONDUCTOR DEVICES MECHANICAL AND CLIMATIC TEST METHODS Part 22: Bond strength 2003 IEC 0 CORR 1 CORRIGENDUM 1 - Edition 1.0 8739 60749-25 Semiconductor devices Mechanical and climatic test methods Part 25: Temperature cycling - Edition 1.0 2003 IEC 0 8740 60749-2 CORR Semiconductor Devices - Mechanical and Climatic Test Methods - Part 2: Low Air Pressure CORRIGENDUM 1 - Edition 2003 IEC 0 1 1.0 8741 60749-16 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 16: Particle Impact Noise Detection (PIND) - 2003 IEC 0 Edition 1.0; Replaces IEC/PAS 62171 8742 60749-17 Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation - Edition 1.0 2003 IEC 0 8743 60749-13 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 13: Salt Atmosphere CORRIGENDUM 1 - Edition 2003 IEC 0 CORR 1 1.0 8744 60749-14 Semiconductor devices Mechanical and climatic test methods Part 14: Robustness of terminations (lead integrity) - Edition 2003 IEC 0 1.0; Together with IEC 60749-31:2002, IEC 60749-3:2002 And IEC 60749-15:2003 Replaces IEC 60749:2002 8745 60749-12 SEMICONDUCTOR DEVICES MECHANICAL AND CLIMATIC TEST METHODS Part 12: Vibration, variable 2003 IEC 0 CORR 1 frequency CORRIGENDUM 1 - Edition 1.0 8746 60749-11 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 11: Rapid Change of Temperature - Two-Fluid- 2003 IEC 0 CORR 1 Bath Method CORRIGENDUM 1 - Edition 1.0 8747 60749-11 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 11: Rapid Change of Temperature - Two-Fluid- 2003 IEC 0 CORR 2 Bath Method CORRIGENDUM 2 - Edition 1.0 8748 60749-10 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 10: Mechanical Shock CORRIGENDUM 1 - 2003 IEC 0 CORR 1 Edition 1.0 8749 60749-1 CORR SEMICONDUCTOR DEVICES MECHANICAL AND CLIMATIC TEST METHODS Part 1: General 2003 IEC 0 1 CORRIGENDUM 1 - Edition 1.0 8750 60695-10-2 Fire hazard testing Part 10-2: Abnormal heat Ball pressure test method - Edition 3.0 2003 IEC 0 8751 60695-11-2 Fire hazard testing Part 11-2: Test flames 1 kW nominal pre-mixed flame Apparatus, confirmatory test arrangement and 2003 IEC 0 guidance - Edition 3.0 8752 60695-11-20 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method - Edition 2.0 2003 IEC 0 8753 60704-2-9 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-9: Particular 2003 IEC 0 requirements for electric hair care appliances - Edition 1.0 8754 60728-7-1 Cable networks for television signals, sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant 2003 IEC 0 status monitoring Physical (PHY) Layer Specification - Edition 1.1; Consolidated Reprint 8755 60670-22 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular 2003 IEC 0 requirements for connecting boxes and enclosures - Edition 1.1 Consolidated Reprint 8756 60684-3-229 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 229: Heat-shrinkable semi-flexible, 2003 IEC 0 polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 - Edition 1.0 8757 60684-3-340 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 340 to 342: Expandable braided 2003 IEC 0 TO 342 polyethylene terephthalate textile sleeving - Edition 2.0 8758 60684-3-406 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 406 to 408: Glass textile sleeving 2003 IEC 0 TO 408 with PVC coating - Edition 2.0 8759 60684-1 Flexible insulating sleeving Part 1: Definitions and general requirements - Edition 2.0 2003 IEC 0 8760 61207-3 CORR Gas analyzers Expression of performance Part 3: Paramagnetic oxygen analyzers CORRIGENDUM 1 - Edition 2.0 2003 IEC 0 1 8761 61207-3 CORR Gas analyzers Expression of performance Part 3: Paramagnetic oxygen analyzers CORRIGENDUM 2 - Edition 2.0 2003 IEC 0 2 8762 61238-1 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) Part 1: Test 2003 IEC 0 methods and requirements - Edition 2.0 8763 61249-2-10 Materials for printed boards and other interconnecting structures Part 2-10: Reinforced base materials clad and unclad 2003 IEC 0 Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical b 8764 61249-2-11 Materials for printed boards and other interconnecting structures Part 2-11: Reinforced base materials clad and unclad - 2003 IEC 0 polyimide, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical bur 8765 61249-2-21 Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced Base Materials, Clad and Unclad - 2003 IEC 0 Non-halogenated Epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad - Ed 8766 61188-5-2 Printed boards and printed board assemblies Design and use Part 5-2: Attachment (land/joint) considerations Discrete 2003 IEC 0 components - Edition 1.0; Replaces IEC 60321 Ed. 1.0: 1970 and IEC 60321-2 Ed. 1.0: 1987 8767 61188-5-6 Printed Boards and Printed Board Assemblies - Design and Use - Part 5-6: Attachment (Land/Joint) Considerations - Chip 2003 IEC 0 Carriers with J-Leads on Four Sides - Edition 1.0; Replaces IEC 60321 Ed. 1.0: 1970 and IEC 60321-2 Ed. 1.0: 1987 8768 61192-1 Workmanship requirements for soldered electronic assemblies Part 1: General - Edition 1.0 2003 IEC 0 8769 61192-2 Workmanship requirements for soldered electronic assemblies Part 2: Surface-mount assemblies - Edition 1.0 2003 IEC 0 8770 61300-3-30 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-30: 2003 IEC 0 Examinations and Measurements - Polish Angle and Fibre Position on Single Ferrule Multifibre Connectors - Edition 1.0 8771 61300-3-16 NULL 2003 IEC 0 8772 61305-5 Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 5: 2003 IEC 0 Loudspeakers - Edition 1.0 8773 61249-2-8 Materials for printed boards and other interconnecting structures Part 2-8: Reinforced base materials clad and unclad 2003 IEC 0 Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad - E 8774 61249-2-9 Materials for printed boards and other interconnecting structures Part 2-9: Reinforced base materials clad and unclad 2003 IEC 0 Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning 8775 61249-2-5 Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad 2003 IEC 0 Brominated epoxied cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (verti 8776 61249-2-6 Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad 2003 IEC 0 Brominated epoxied nonwoven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad - E 8777 61280-2-8 Fibre optic communication subsystem test procedures Digital systems Part 2-8: Determination of low BER using Q-factor 2003 IEC 0 measurements - Edition 1.0 8778 61290-5-2 Optical amplifiers Test methods Part 5-2: Reflectance parameters Electrical spectrum analyser method - Edition 1.0 2003 IEC 0 8779 61290-3-1 Optical amplifiers Test methods Part 3-1: Noise figure parameters Optical spectrum analyzer method - Edition 1.0 2003 IEC 0 8780 60999-2 Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units 2003 IEC 0 Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) - Edition 2.0 8781 61000-6-6 Electromagnetic compatibility (EMC) Part 6-6: Generic standards HEMP immunity for indoor equipment - Edition 1.0 2003 IEC 0 8782 61005 Radiation protection instrumentation Neutron ambient dose equivalent (rate) meters - Edition 3.0 2003 IEC 0 8783 61010-2-010 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular 2003 IEC 0 requirements for laboratory equipment for the heating of materials - Edition 3.0 8784 61010-2-051 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular 2003 IEC 0 requirements for laboratory equipment for mixing and stirring - Edition 3.0 8785 61010-2-061 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular 2003 IEC 0 requirements for laboratory atomic spectrometers with thermal atomization and ionization - Edition 3.0 8786 61076-3-103 Connectors for electronic equipment Part 3-103: Rectangular connectors Detail specification for single row connectors with 2003 IEC 0 non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) - Edition 1.0 8787 61058-2-4 Switches for appliances Part 2-4: Particular requirements for independently mounted switches - Edition 1.1; Consolidated 2003 IEC 0 Reprint 8788 61014 Programmes for Reliability Growth - Edition 2.0 2003 IEC 0 8789 61076-4-115 Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment - 2003 IEC 0 Edition 1.0 8790 61097-13 Global maritime distress and safety system (GMDSS) Part 13: INMARSAT F77 ship earth station equipment Operational 2003 IEC 0 and performance requirements, methods of testing and required test results - Edition 1.0 8791 61084-2-2 Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable 2003 IEC 0 trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor - Edition 2.0 8792 61108-1 Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 1: 2003 IEC 0 Global positioning system (GPS) Receiver equipment Performance standards, methods of testing and required test results - Edition 2.0 8793 61098 Radiation protection instrumentation Installed personnel surface contamination monitoring assemblies - Edition 2.0 2003 IEC 0 8794 61156-7-1 Multicore and symmetrical pair/quad cables for digital communications Part 7-1: Symmetrical pair cables with 2003 IEC 0 transmission characteristics up to 1 200 MHz Blank detail specification for digital and analog communication cables - Edition 1.0 8795 61156-7-2 Multicore and symmetrical pair/quad cables for digital communications Part 7-2: Symmetrical pair cables with 2003 IEC 0 transmission characteristics up to 1 200 MHz Quality assessment procedure Sectional specification for digital and analog communication cables - Ed 8796 61131-1 Programmable Controllers - Part 1: General Information - Edition 2.0 2003 IEC 0 8797 61156-5-2 Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 5-2: Symmetrical Pair/Quad Cables with 2002 IEC 0 Transmission Characteristics up to 600 MHz - Horizontal Floor Wiring - Capability Approval - Section Specification - Edition 1.0 8798 61156-6-2 Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 6-2: Symmetrical Pair/Quad Cables with 2002 IEC 0 Transmission Characteristics up to 600 MHz - Work Area Wiring - Capability Approval - Sectional Specification - Edition 1.0 8799 61076-4-113 Connectors for electronic equipment Printed board connectors Part 4-113: Detail specification for two-part connectors 2002 IEC 0 having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications - Edition 1.0 8800 61076-4-108 Connectors for Electronic Equipment - Part 4-108: Printed Board Connectors with Assessed Quality - Detail Specification 2002 IEC 0 for Cable-to-Board Connectors with a Modular Pitch of 25 mm and Integrated Shielding Function, Applicable for Transverse Packing Densit 8801 61010-2-101 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular 2002 IEC 0 requirements for in vitro diagnostic (IVD) medical equipment - Edition 2.0 8802 61076-2-102 Connectors for Electronic Equipment - Part 2-102: Circular Connectors with Assessed Quality - Detail Specification for 2002 IEC 0 Plugs and Jacks for External Low Voltage Power Supply - Edition 1.0 8803 61000-2-2 Electromagnetic Compatibility (EMC) Part 2-2: Environment - Compatibility Levels for Low-Frequency Conducted 2002 IEC 0 Disturbances and Signalling in Public Low-Voltage Power Supply Systems - Edition 2.0 8804 61000-2-2(2 NULL 2002 IEC 0 8805 61000-2-4 Electromagnetic compatibility (EMC) Part 2-4: Environment - Compatibility levels for low-frequency conducted 2002 IEC 0 disturbances - Edition 2.0 8806 61290-10-3 Optical amplifiers Test methods Part 10-3: Multichannel parameters Probe methods - Edition 1.0 2002 IEC 0 8807 61290-5-3 Optical Fibre Amplifiers - Basic Specification - Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance 2002 IEC 0 Using an Electrical Spectrum Analyser - Edition 1.0 8808 61291-5-2 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers - Edition 2.0 2002 IEC 0 8809 61252 Electroacoustics - Specifications for Personal Sound Exposure Meters - Edition 1.2; Consolidated Rprint 2002 IEC 0 8810 61249-2-7 Materials for Printed Boards and Other Interconnecting Structures - Part 2-7: Reinforced Base Materials Clad and Unclad - 2002 IEC 0 Epoxide Woven E-Glass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad - Edition 1.0; Replaces IEC 60249 8811 61300-3-26 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-26: 2002 IEC 0 Examination and Measurements - Measurement of the Angular Misalignment between Fibre and Ferrules Axes - Edition 2.0 8812 61192-3 Workmanship requirements for soldered electronic assemblies Part 3: Through-hole mount assemblies - Edition 1.0 2002 IEC 0 8813 61192-4 Workmanship requirements for soldered electronic assemblies Part 4: Terminal assemblies - Edition 1.0 2002 IEC 0 8814 61190-1-1 Attachmant Materials for Electronic Assembly - Part 1-1: Requirements for Soldering Fluxes for High-Quality 2002 IEC 0 Interconnections in Electronics Assembly - Edition 1.0 8815 61188-5-1 Printed Boards and Printed Board Assemblies - Design and Use - Part 5-1: Attachment (Land/Joint) Considerations - 2002 IEC 0 Generic Requirements - Edition 1.0; Replaces IEC 60321 Ed. 1.0: 1970 and IEC 60321-2 Ed. 1.0: 1987 8816 61249-2-18 Materials for Printed Boards and Other Interconnecting Structures - Part 2-18: Reinforced Base Materials, Clad and Unclad 2002 IEC 0 - Polyester Non-Woven Fibreglass Reinforced Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper- Clad - Edition 1. 8817 61243-2 Live Working - Voltage Detectors - Part 2: Resistive Type to Be Used for Voltages of 1 kV to 36 kV a.c. - Edition 1.2 2002 IEC 0 Consolidated Reprint 8818 61229 Rigid Protective Covers for Live Working on a.c. Installations - Edition 1.2 Consolidated Reprint 2002 IEC 0 8819 61207-3 Gas Analyzers - Expression of Performance - Part 3: Paramagnetic Oxygen Analyzers - Edition 2.0 2002 IEC 0 8820 60684-3-420 Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheets 420 to 422: Polyethylene 2002 IEC 0 TO 422 Terephthalate Textile Sleeving with Acrylic Based Coating - Edition 2.0 8821 60684-3-343 Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheets 343 to 345: Expandable 2002 IEC 0 TO 345 Braided Ethylene Chlorotrifluoroethylene (E-CTFE) Textile Sleeving, Uncoated - Edition 2.0 8822 60684-3-400 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 400 to 402: Glass Textile 2002 IEC 0 TO 402 Sleeving with Silicone Elastomer Coating - Edition 2.0 8823 60684-3-403 Flexible Insulating Sleeving - Part 3: Specification Individual Types of Sleeving - Sheets 403 to 405: Glass Textile 2002 IEC 0 TO 405 Sleeving with Acrylic Based Coating - Edition 2.0 8824 60684-3-300 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 300: Glass Textile Fibre 2002 IEC 0 Sleeving, Braided, Uncoated - Edition 2.0 8825 60684-3-320 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 320: Polyethylene 2002 IEC 0 Terephthalate Textile Sleeving, Lightly Impregnated - Edition 2.0 8826 60691 Thermal-links Requirements and application guide - Edition 4.0 2002 IEC 0 8827 60684-3-240 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 240 to 243: Heat-Shrinkable 2002 IEC 0 TO 243 PTFE Sleeving - Edition 2.0 8828 60652 Loading Tests on Overhead Line Structures - Edition 2.0 2002 IEC 0 8829 60721-3-0 Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities 2002 IEC 0 Introduction - Edition 1.1 Consolidated Reprint 8830 60721-3-7 Classification of Environmental Conditions - Part 3-7: Classification of Groups of Environmental Parameters and Their 2002 IEC 0 Severities - Portable and Non-Stationary Use - Edition 2.1 Consolidated Reprint 8831 60721-3-3 Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their 2002 IEC 0 severities Stationary use at weatherprotected locations - Edition 2.2 Consolidated Reprint 8832 60721-2-4 Classification of environmental conditions Part 2-4: Environmental conditions appearing in nature Solar radiation and 2002 IEC 0 temperature - Edition 1.1 Consolidated Reprint 8833 60721-1 Classification of environmental conditions Part 1: Environmental parameters and their severities - Edition 2.2 Consolidated 2002 IEC 0 Reprint 8834 60721-2-1 Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature Temperature and 2002 IEC 0 humidity - Edition 2.0 8835 60702-2 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations - Edition 2.1 2002 IEC 0 Consolidated Reprint 8836 60702-1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 1: Cables - Edition 3.1 2002 IEC 0 Consolidated Reprint 8837 60695-5-1 Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent General guidance - Edition 2.0 2002 IEC 0 8838 60695-10-3 Fire hazard testing Part 10-3: Abnormal heat Mould stress relief distortion test - Edition 2.0 2002 IEC 0 8839 60793-1-45 Optical Fibres - Part 1-45: Measurement Methods and Test Procedures - Mode Field Diameter - Edition 1.0 2002 IEC 0 COR 1 8840 60774-4 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - Part 4: S-VHS Video 2002 IEC 0 Cassette System - ET Mode - Edition 1.0 8841 60749-1 Semiconductor devices Mechanical and climatic test methods Part 1: General - Edition 1.0 2002 IEC 0 8842 60749-10 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 10: Mechanical Shock - Edition 1.0 2002 IEC 0 8843 60749-11 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 11: Rapid Change of Temperature - Two-Fluid- 2002 IEC 0 Bath Method - Edition 1.0 8844 60749-12 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 12: Vibration, Variable Frequency - Edition 1.0 2002 IEC 0 8845 60749-13 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 13: Salt Atmosphere - Edition 1.0 2002 IEC 0 8846 60749-18 Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) - Edition 1.0 2002 IEC 0 8847 60749-2 Semiconductor Devices - Mechanical and Climatic Test Methods - Part 2: Low Air Pressure - Edition 1.0 2002 IEC 0 8848 60749-22 Semiconductor devices Mechanical and climatic test methods Part 22: Bond strength - Edition 1.0 2002 IEC 0 8849 60749-8 Semiconductor devices Mechanical and climatic test methods Part 8: Sealing - Edition 1.0 2002 IEC 0 8850 60761-1 Equipment for Continuous Monitoring of Radioactivity in Gaseous Effluents - Part 1: General Requirements - Edition 2.0 2002 IEC 0 8851 60761-2 Equipment for Continuous Monitoring of Radioactivity in Gaseous Effluents - Part 2: Specific Requirements for 2002 IEC 0 Radioactive Aerosol Monitors Including Transuranic Aerosols - Edition 2.0; Replaces IEC 60761-6 8852 60761-3 Equipment for Continuous Monitoring of Radioactivity in Gaseous Effluents - Part 3: Specific Requirements for Noble Gas 2002 IEC 0 Monitors - Edition 2.0 8853 60761-4 Equipment for Continuous Monitoring Radioactivity in Gaseous Effluents - Part 4: Specific Requirements for Iodine 2002 IEC 0 Monitors - Edition 2.0 8854 60761-5 Equipment for Continuous Monitoring Radioactivity in Gaseous Effluents - Part 5: Specific Requirements for Tritium 2002 IEC 0 Monitors - Edition 2.0 8855 60749-6 Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature - Edition 2.0 2002 IEC 0 8856 60749-9 Semiconductor devices Mechanical and climatic test methods Part 9: Permanence of marking - Edition 2.0 2002 IEC 0 8857 60749-3 Semiconductor devices Mechanical and climatic test methods Part 3: External visual examination - Edition 2.0 2002 IEC 0 8858 60749-31 Semiconductor devices Mechanical and climatic test methods Part 31: Flammability of plastic-encapsulated devices 2002 IEC 0 (internally induced) - Edition 1.0 8859 60749-4 Semiconductor devices Mechanical and climatic test methods Part 4: Damp heat, steady state, highly accelerated stress 2002 IEC 0 test (HAST) - Edition 2.0 8860 60748-23-1 Semiconductor Devices - Integrated Circuits - Part 23-1: Hybrid Integrated Circuits and Film Structures - Manufacturing 2002 IEC 0 Line Certification - Generic Specification - Edition 1.0 8861 60748-23-2 Semiconductor Devices - Integrated Circuits - Part 23-2: Hybrid Integrated Circuits and Film Structures - Manufacturing 2002 IEC 0 Line Certification - Internal Visual Inspection and Special Tests - Edition 1.0 8862 60748-23-3 Semiconductor Devices - Integrated Circuits - Part 23-3: Hybrid Integrated Circuits and Film Structures - Manufacturing 2002 IEC 0 Self-Audit Checklist and Report - Edition 1.0 _آLine Certification - Manufacturers 8863 60748-23-4 Semiconductor Devices - Integrated Circuits - Part 23-4: Hybrid Integrated Circuits and Film Structures - Manufacturing 2002 IEC 0 Line Certification - Blank Detail Specification - Edition 1.0 8864 60748-1 Semiconductor Devices - Integrated Circuits - Part 1: General - Edition 2.0 2002 IEC 0 8865 60747-5-1 Discrete Semiconductor Devices and Integrated Circuits - Part 5-1: Optoelectronic Devices - General - Edition 1.2 2002 IEC 0 Consolidated Reprint 8866 60746-3 Expression of performance of electrochemical analyzers Part 3: Electrolytic conductivity - Edition 2.0 2002 IEC 0 8867 60931-1 AMD Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 2002 IEC 0 1 1: General Performance, testing and rating Safety requirements Guide for installation and operation - Edition 2.0 8868 60945 Maritime Navigation and Radiocommunication Equipment and Systems - General Requirements - Methods of Testing and 2002 IEC 0 Required Test Results - Edition 4.0 8869 60903 Live working Electrical insulating gloves - Edition 3.0 2002 IEC 0 8870 60896-11 Stationary lead-acid batteries Part 11: Vented types General requirements and methods of tests - Edition 1.0 2002 IEC 0 kV d.c. - Edition 2.0 2002 IEC 0 600_آ Live working Conductive clothing for use at nominal voltage up to 800 kV a.c. and 60895 8871 8872 60984 Live working Electrical insulating sleeves - Edition 2.0 2002 IEC 0 8873 60998-1 Connecting Devices for Low Voltage Circuits for Household and Similar Purposes - Part 1: General Requirements - Edition 2002 IEC 0 2.0; Includes Interpretation 1: 03/2005 8874 60998-2-1 Connecting devices for low-voltage circuits for household and similar purposes Part 2-1: Particular requirements for 2002 IEC 0 connecting devices as separate entities with screw-type clamping units - Edition 2.0 8875 60998-2-2 Connecting devices for low-voltage circuits for household and similar purposes Part 2-2: Particular requirements for 2002 IEC 0 connecting devices as separate entities with screwless-type clamping units - Edition 2.0 8876 60998-2-3 Connecting devices for low-voltage circuits for household and similar purposes Part 2-3: Particular requirements for 2002 IEC 0 connecting devices as separate entities with insulation-piercing clamping units - Edition 2.0 8877 60950-21 Information technology equipment Safety Part 21: Remote power feeding - Edition 1.0 2002 IEC 0 8878 60947-5-4 Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements Method of assessing the 2002 IEC 0 performance of low-energy contacts Special tests - Edition 2.0 8879 60831-1 Shunt Power Capacitors of the Self-Healing Type for A.C. Systems Having a Rated Voltage up to and Including 1 000 V - 2002 IEC 0 Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation - Edition 3.0 8880 60870-6-503 Telecontrol equipment and systems Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T 2002 IEC 0 recommendations TASE.2 Services and protocol - Edition 3.0 8881 60853-3 Calculation of the Cyclic and Emergency Current Rating of Cables Part 3: Cyclic Rating Factor for Cables of all Voltages, 2002 IEC 0 with Partial Drying of the Soil - Edition 1.0 8882 60794-2 Optical fibre cables Part 2: Indoor cables Sectional specification - Edition 3.0 2002 IEC 0 8883 60809 Lamps for road vehicles Dimensional, electrical and luminous requirements - Edition 3.0 2002 IEC 0 8884 60313 Coaxial Connectors Used in Nuclear Laboratory Instrumentation - Edition 3.0 2002 IEC 0 8885 60287-1-3 Electric Cables - Calculation of the Current Rating - Part 1-3: Current Rating Equations (100% Load Factor) and 2002 IEC 0 Calculation of Losses - Current Sharing between Parallel Single-Core Cables and Calculation of Circulating Current Losses - Edition 1.0 8886 60099-6 Surge Arresters - Part 6: Surge Arresters Containing Both Series and Parallel Gapped Structures - Rated 52 kV and Less - 2002 IEC 0 Edition 1.0 8887 60122-1 Quartz Crystal Units of Assessed Quality - Part 1: Generic Specification - Edition 3.0; Replaces IEC 61178-1, 1983 and 2002 IEC 0 IEC 60302, 1969 8888 60191-2 AMD Amendment 5 Mechanical standardization of semiconductor devices - Part 2: Dimensions - Edition 1.0 2002 IEC 0 5 8889 60191-2 AMD Amendment 6 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2002 IEC 0 6 8890 60191-2 AMD Amendment 7 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2002 IEC 0 7 8891 60191-4 Mechanical Standardization of Semiconductor Devices - Part 4: Coding System and Classification into Forms of Package 2002 IEC 0 Outlines for Semiconductor Device Packages - Edition 3.0 8892 60073 Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Coding Principles for Indicators and 2002 IEC 0 Actuators - Edition 6.0 8893 60092-101(2 NULL 2002 IEC 0 8894 60081 Double-Capped Fluorescent Lamps - Performance Specifications - Edition 5.1 Consolidated Reprint 2002 IEC 0 8895 60076-4 Power Transformers-Part 4: Guide to the Lightning Impulse and Switching Impulse Testing - Power Transformers and 2002 IEC 0 Reactors - Edition 1.0; Replaces IEC 60722 8896 60050-444 International Electrotechnical Vocabulary Part 444: Elementary Relays - Edition 1.0 2002 IEC 0 8897 60050-131 International Electrotechnical Vocabulary - Part 131: Circuit Theory - Edition 2.0 2002 IEC 0 8898 60050-121 Amendment 1 International Electrotechnical Vocabulary - Part 121: Electromagnetism - Edition 2.0 2002 IEC 0 AMD 1 8899 60050-191 Amendment 2 International Electrotechnical Vocabulary Part 191: Dependability and quality of service - Edition 1.0 2002 IEC 0 AMD 2 8900 60044-3 NULL 2002 IEC 0 8901 60044-8 Instrument transformers - Part 8: Electronic current transformers - Edition 1.0 2002 IEC 0 8902 60027-3 Letter Symbols to Be Used in Electrical Technology - Part 3: Logarithmic and Related Quantities and Their Units - Edition 2002 IEC 0 3.0 8903 60050-808 International Electrotechnical Vocabulary Part 808: Video Cameras for Non-Broadcasting - Edition 1.0 2002 IEC 0 8904 60050-521 International Electrotechnical Vocabulary Chapter 521: Semiconductor Devices and Integrated Circuits - Edition 2.0 2002 IEC 0 8905 60052 Voltage measurement by means of standard air gaps - Edition 3.0 2002 IEC 0 8906 60325 Radiation Protection Instrumentation - Alpha, Beta and Alpha/Beta (Beta Energy >60 keV) Contamination Meters and 2002 IEC 0 Monitors - Edition 3.0 8907 60335-2-100 Household and Similar Electrical Appliances Safety Part 2-100: Particular Requirements for Hand-Held Mainsoperated 2002 IEC 0 Garden Blowers, Vacuums and Blower Vacuums - Edition 1.0 8908 60335-2-77 Safety of Household and Similar Electrical Appliances - Safety - Part 2-77: Particular Requirements for Pedestrian 2002 IEC 0 Controlled Mains-Operated Lawnmowers - Edition 2.0 8909 60335-2-88 Household and similar electrical appliances Safety Part 2-88: Particular requirements for humidifiers intended for use with 2002 IEC 0 heating, ventilation, or airconditioning systems - Edition 2.0 8910 60335-2-92 Household and similar electrical appliances Safety Part 2-92: Particular requirements for pedestrian-controlled mains- 2002 IEC 0 operated lawn scarifiers and aerators - Edition 2.0 8911 60401-1 Terms and nomenclature for cores made of magnetically soft ferrites Part 1: Terms used for physical irregularities - Edition 2002 IEC 0 1.0 8912 60404-14 Magnetic Materials - Part 14: Methods of Measurement of the Magnetic Dipole Moment of a Ferromagnetic Material 2002 IEC 0 Specimen by the Withdrawal or Rotation Method - Edition 1.0 8913 60364-5-53 Electrical Installations of Buildings - Part 5-53: Selection and Erection of Electrical Equipment - Isolation, Switching and 2002 IEC 0 Control - Edition 3.2 Consolidated Reprint 8914 60353 AMD 1 Line Traps for A.C. Power Systems - Edition 2.0 2002 IEC 0 8915 60352-7 Solderless connections Part 7: Spring clamp connections General requirements, test methods and practical guidance - 2002 IEC 0 Edition 1.0 8916 60357 Tungsten halogen lamps (non-vehicle) Performance specifications - Edition 3.0 2002 IEC 0 8917 60364-7-710 Electrical installations of buildings Part 7-710: Requirements for special installations or locations Medical locations - 2002 IEC 0 Edition 1.0 8918 60364-7-712 Low voltage electrical installations Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV) 2002 IEC 0 power supply systems - Edition 2.0 8919 60512-25-2 Connectors for Electronic Equipment - Tests and Measurements - Part 25-2: Test 25b - Attenuation (Insertion Loss) - 2002 IEC 0 Edition 1.0 8920 60512-25-2(2 NULL 2002 IEC 0 8921 60512-3-1 Connectors for Electronic Equipment; Tests and Measurements - Part 3-1: Insulation Tests - Test 3a: Insulation Resistance 2002 IEC 0 - Edition 1.0; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512-2-6, 60512-4-2, and 60512-4-3 Replaces IEC 60512-2 8922 60512-4-2 Connectors for Electronic Equipment; Tests and Measurements - Part 4-2: Voltage Stress Tests - Test 4b: Partial Discharge 2002 IEC 0 - Edition 1.0; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512-2-6, 60512-3-1, and 60512-4-3 Replaces IEC 60512-2 8923 60512-4-3 Connectors for Electronic Equipment; Tests and Measurements - Part 4-3: Voltage Stress Tests - Test 4c: Voltage Proof of 2002 IEC 0 Pre-Insulated Crimp Barrels - Edition 1.0; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512-2-6, 60512-3-1, and 605 8924 60512-5-1 Connectors for Electronic Equipment; Tests and Measurements - Part 5-1: Current-Carrying Capacity Tests - Test 5a: 2002 IEC 0 Temperature Rise - Edition 1.0; This Standard Along with IEC 60512-5-2 Replaces IEC 60512-3 8925 60512-5-2 Connectors for Electronic Equipment - Tests and Measurements - Part 5-2: Current-Carrying Capacity Tests - Test 5b: 2002 IEC 0 Current-Temperature Derating - Edition 1.0; This Standard Along with IEC 60512-5-1 Replaces IEC 60512-3 8926 60512-6-1 Connectors for Electronic Equipment - Tests and Measurements - Part 6-1: Dynamic Stress Tests - Test 6a: Acceleration, 2002 IEC 0 Steady State - Edition 1.0; This Standard Along with 60512-6-2 Replaces IEC 60512-4 8927 60512-6-2 Connectors for Electronic Equipment - Tests and Measurements - Part 6-2: Dynamic Stress Tests - Test 6b: Bump - Edition 2002 IEC 0 1.0; This Standard Along with 60512-6-1 Replaces IEC 60512-4 8928 60512-6-3 Connectors for Electronic Equipment - Tests and Measurements - Part 6-3: Dynamic Stress Tests - Test 6c: Shock - Edition 2002 IEC 0 1.0; Replaces IEC 60512-4 8929 60512-6-4 Connectors for Electronic Equipment - Tests and Measurments - Part 6-4: Dynamic Stress Tests - Test 6d: Vibration 2002 IEC 0 (Sinusoidal) - Edition 1.0 8930 60512-2-6 Connectors for Electronic Equipment; Tests and Measurements - Part 2-6: Electrical Continuity and Contact Resistance 2002 IEC 0 Tests - Test 2f: Housing (Shell) Electrical Continuity - Edition 1.0; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512- 8931 60512-2-3 Connectors for Electronic Equipment; Tests and Measurements - Part 2-3: Electrical Continuity and Contact Resistance 2002 IEC 0 Tests - Test 2c: Contact Resistance Variation - Edition 1.0; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2- 6, 60512-3-1, 6051 8932 60512-1-1 Connectors for Electronic Equipment - Tests and Measurements - Part 1-1: General Examination - Test 1a: Visual 2002 IEC 0 Examination - Edition 1.0 8933 60512-11-9 Connectors for Electronic Equipment - Tests and Measurements - Part 11-9: Climatic Tests - Test 11i: Dry Heat - Edition 2002 IEC 0 1.0; This Standard Along with IEC 60512-11-5, 60512-11-6, 60512-11-10, 60512-11-12 and 60512-11-13 Replaces IEC 60512-6 8934 60512-1-2 Connectors for Electronic Equipment - Tests and Measurements - Part 1-2: General Examination - Test 1b: Examination of 2002 IEC 0 Dimension and Mass - Edition 1.0; This Standard Along with IEC 60512-2-1, 60512-2-3, 60512-2-6, 60512-3-1, 60512-4- 2, 60512-4-3 Replaces 8935 60512-11-10 Connectors for Electronic Equipment - Tests and Measurements - Part 11-10: Climatic Tests - Test 11j: Cold - Edition 1.0; 2002 IEC 0 This Standard Along with IEC 60512-11-5, 60512-11-6, 60512-11-9, 60512-11-12 and 60512-11-13 Replaces IEC 60512-6 8936 60512-11-11 Connectors for Electronic Equipment - Tests and Measurements - Part 11-11: Climatic Tests - Test 11k: Low Air Pressure - 2002 IEC 0 Edition 1.0 8937 60512-11-12 Connectors for Electronic Equipment - Tests and Measurements - Part 11-12: Climatic Tests - Test 11m: Damp Heat, 2002 IEC 0 Cyclic - Edition 1.0; This Standard Along with IEC 60512-11-5, 60512-11-6, 60512-11-9, 60512-11-10 and 60512-11-13 Replaces IEC 60512-6 8938 60512-11-13 Connectors for Electronic Equipment - Tests and Measurements - Part 11-13: Climatic Tests - Test 11n: Gas Tightness, 2002 IEC 0 Solderless Wrapped Connections - Edition 1.0; This Standard Along with IEC 60512-11-5, 60512-11-6, 60512-11-9, 60512-11-10 and 60512-11-12 8939 60512-11-2 Connectors for Electronic Equipment - Tests and Measurements - Part 11-2: Climatic Tests - Test 2002 IEC 0 11b:Combined/Sequential Cold, Low Air Pressure and Damp Heat - Edition 1.0 8940 60512-11-3 Connectors for Electronic Equipment - Tests and Measurements - Part 11-3: Climatic Tests - Test 11c: Damp Heat, Steady 2002 IEC 0 State - Edition 1.0 8941 60512-11-4 Connectors for Electronic Equipment - Tests and Measurements - Part 11-4: Climatic Tests - Test 11d: Rapid Change of 2002 IEC 0 Temperature - Edition 1.0 8942 60512-11-5 Connectors for Electronic Equipment - Tests and Measurements - Part 11-5: Climatic Tests - Test 11e: Mould Growth - 2002 IEC 0 Edition 1.0; This Standard Along with IEC 60512-11-6, 60512-11-9, 60512-11-10, 60512-11-12 and 60512-11-13 Replaces IEC 60512-6 8943 60512-11-6 Connectors for Electronic Equipment - Tests and Measurements - Part 11-6: Climatic Tests - Test 11f: Corrosion, Salt Mist 2002 IEC 0 - Edition 1.0; This Standard Along with IEC 60512-11-5, 60512-11-9, 60512-11-10, 60512-11-12 and 60512-11-13 Replaces IEC 60512-6 8944 60512-2-1 Connectors for Electronic Equipment; Tests and Measurements - Part 2-1: Electrical Continuity and Contact Resistance 2002 IEC 0 Tests - Test 2a: Contact Resistance - Millivolt Level Method - Edition 1.0; This Standard Along with IEC 60512-1-2, 60512-2-3, 60512-2-6, 8945 60454-3-1 Pressure-sensitive adhesive tapes for electrical purposes Part 3 Specifications for individual materials Sheet 1: PVC film 2002 IEC 0 tapes with pressure-sensitive adhesive - Edition 2.1 Consolidated Reprint 8946 60494-1 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles - 2002 IEC 0 Edition 2.0 8947 60494-2 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 2: Pantographs for metros and light rail 2002 IEC 0 vehicles - Edition 2.0 8948 60622 Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-cadmium prismatic 2002 IEC 0 rechargeable single cells - Edition 3.0 8949 TS 61370 Steam Turbines - Steam Purity - Edition 1.0 2002 IEC 0 8950 TS 62143 Electrical Installations for Lighting and Beaconing of Aerodromes - Aeronautical Ground Lighting Systems - Guidelines 2002 IEC 0 for the Development of a Safety Lifecycle Methodology - Edition 1.0 8951 TS 60695-11-40 Fire Hazard Testing - Part 11-40: Test Flames - Confirmatory Tests - Guidance - Edition 1.0 2002 IEC 0 8952 TS 60695-7-50 NULL 2002 IEC 0 8953 TS 60695-7-51 NULL 2002 IEC 0 8954 TS 60695-1-40 Fire hazard testing Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids - Edition 2002 IEC 0 1.0 8955 TS 60695-5-2 Fire Hazard Testing Part 5-2: Corrosion Damage Effects of Fire Effluent Summary and Relevance of Test Methods - 2002 IEC 0 Edition 2.0 8956 TS 60071-5 NULL 2002 IEC 0 8957 TS 60034-20-1 Rotating Electrical Machines - Part 20-1: Control Motors - Stepping Motors - Edition 1.0 2002 IEC 0 8958 TR 62066 Surge Overvoltages and Surge Protection in Low-Voltage a.c. Power Systems - General Basic Information - Edition 1.0 2002 IEC 0 8959 TR 62266 NULL 2002 IEC 0 8960 TR 62059-11 Electricity Metering Equipment - Dependability - Part 11: General Concepts - Edition 1.0 2002 IEC 0 8961 TR 62059-21 Electricity Metering Equipment - Dependability - Part 21: Collection of Meter Dependability Data from the Field - Edition 2002 IEC 0 1.0 8962 TR 62014-3 Electronic design automation libraries Part 3: Models of integrated circuits for EMI behavioural simulation - Edition 1.0 2002 IEC 0 8963 TR 61282-5 Fibre Optic Communication System Design Guides - Part 5: Accommodation and Compensation of Dispersion - Edition 2002 IEC 0 1.0 8964 TR 60664-2-2 Insulation coordination for equipment within low-voltage systems Part 2-2: Interface considerations Application guide - 2002 IEC 0 Edition 1.0 8965 QC 001006 NULL 2002 IEC 0 8966 TR 60721-4-0 Classification of Environmental Conditions - Part 4-0: Guidance for the Correlation and Transformation of Environmental 2002 IEC 0 Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Introduction - Edition 1.0 8967 TR 60909-1 Short-Circuit Currents in Three-Phase a.c. Systems - Part 1: Factors for the Calculation of Short-Circuit Currents 2002 IEC 0 According to IEC 60909-0 - Edition 2.0; Shall Be Used in Conjunction with IEC 60909-0 8968 TR 61000-1-3 Electromagnetic Compatibility (EMC) - Part 1-3: General - The Effects of High-Altitude EMP (HEMP) on Civil 2002 IEC 0 Equipment and Systems - Edition 1.0 8969 TR 61000-5-6 Electromagnetic Compatibility (EMC) - Part 5-6: Installation and Mitigation Guidelines - Mitigation of External EM 2002 IEC 0 Influences - Edition 1.0 8970 TR 61000-4-32 Electromagnetic compatibility (EMC) Part 4-32: Testing and measurement techniques High-altitude electromagnetic pulse 2002 IEC 0 (HEMP) simulator compendium - Edition 1.0 8971 TR 61000-2-8 Electromagnetic compatibility (EMC) Part 2-8: Environment Voltage dips and short interruptions on public electric power 2002 IEC 0 supply systems with statistical measurement results - Edition 1.0 8972 TR 61044 Opportunity charging of lead-acid traction batteries - Edition 2.0 2002 IEC 0 8973 IECEX TR NULL 2002 IEC 0 60079-27 8974 62122 Methods of Measurement for Consumer-Use Digital VTRs - Electronic and Mechanical Performances - Edition 1.0 2002 IEC 0 8975 62148-1 Fibre Optic Active Componets and Devices - Package and Interface Standards - Part 1: General and Guidance - Edition 1.0 2002 IEC 0 8976 62148-1(2 NULL 2002 IEC 0 8977 62219 Overhead Electrical Conductors - Formed Wire, Concentric Lay, Stranded Conductors - Edition 1.0 2002 IEC 0 8978 62262 Degrees of Protection Provided by Enclosures for Electrical Equipment Against External Mechanical Impacts (IK Code) - 2002 IEC 0 Edition 1.0 8979 62278 Railway Applications Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - 2002 IEC 0 Edition 1.0 8980 62279 Railway applications - Communication, signalling and processing systems - Software for railway control and protection 2002 IEC 0 systems - Edition 2.0 8981 62280-1 NULL 2002 IEC 0 8982 62280-2 NULL 2002 IEC 0 8983 62289 Video Recording - Helical-Scan Digital Video Cassette Recording Format Using 12,65 mm Magnetic Tape and 2002 IEC 0 Incorporating MPEG-2 Compression - Format D-10 - Edition 1.0 8984 62326-1 Printed Boards - Part 1: Generic Secification - Edition 2.0; IECQ QC 230000; Replaces IEC 60747-5 2002 IEC 0 8985 62326-1(2 NULL 2002 IEC 0 8986 61823 Electrical installations for lighting and beaconing of aerodromes AGL series transformers - Edition 1.0 2002 IEC 0 8987 61811-10 NULL 2002 IEC 0 8988 61811-11 NULL 2002 IEC 0 8989 61811-50 NULL 2002 IEC 0 8990 61811-51 NULL 2002 IEC 0 8991 61811-52 NULL 2002 IEC 0 8992 61811-53 NULL 2002 IEC 0 8993 61811-54 NULL 2002 IEC 0 8994 61811-55 NULL 2002 IEC 0 8995 61811-55 NULL 2002 IEC 0 CORR 1 8996 61842 Microphones and Earphones for Speech Communications - Edition 1.0 2002 IEC 0 8997 61850-3 Communication networks and systems for power utility automation Part 3: General requirements - Edition 2.0 2002 IEC 0 8998 61800-4 Adjustable Speed Electrical Power Drive Systems - Part 4: General Requirements - Rating Specifications for a.c. Power 2002 IEC 0 Drive Systems above 1 000 V a.c. and not Exceeding 35 kV - Edition 1.0 8999 61947-1 Electronic Projection - Measurement and Documentation of Key Performance Criteria - Part 1: Fixed Resolution Projectors 2002 IEC 0 - Edition 1.0 9000 61922 High-Frequency Induction Heating Installations - Test Methods for the Determination of Power Output of the Generator - 2002 IEC 0 Edition 1.0 9001 61880-2 Video Systems (525/60) Video and Accompanied Data Using the Vertical Blanking Interval Analogue Interface Part 2: 525 2002 IEC 0 Progressive Scan System - Edition 1.0 9002 61888 Nuclear Power Plants - Instrumentation Important to Safety - Determination and Maintenance of Trip Setpoints - Edition 2002 IEC 0 1.0 9003 62012-1 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Part 1: Generic 2002 IEC 0 specification - Edition 1.0 9004 62011-1 Insulating Materials - Industrial, Rigid, Moulded, Laminated Tubes and Rods of Rectangular and Hexagonal Cross-Section 2002 IEC 0 Based on Thermosetting Resins for Electrical Purposes - Part 1: Definitions, Designations and General Requirements - Edition 1.0 9005 61967-1 Integrated Circuits - Measurement of Electromagnetic Emissions, 150 kHz to 1 GHz Part 1: General Conditions and 2002 IEC 0 Definitions - Edition 1.0 9006 62090 Product package labels for electronic components using bar code and twodimensional symbologies - Edition 2.0 2002 IEC 0 9007 62094-1 Indicator light units for household and similar fixed- electrical installations Part 1: General requirements - Edition 1.0 2002 IEC 0 9008 62056-21 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 21: Direct Local Data Exchange - 2002 IEC 0 Edition 1.0 9009 62056-42 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 42: Physical Layer Services and 2002 IEC 0 Procedures for Connection-Oriented Asynchronous Data Exchange - Edition 1.0 9010 62065 Maritime navigation and radiocommunication equipment and systems Track control systems Operational and performance 2002 IEC 0 requirements, methods of testing and required test results - Edition 2.0 9011 62044-1 Cores Made of Soft Magnetic Materials - Measuring Methods - Part 1: Generic Specification - Edition 1.0 2002 IEC 0 9012 62028 General methods of measurement for digital television receivers - Edition 1.0 2002 IEC 0 9013 61754-4 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 4: Type SC connector 2002 IEC 0 family - Edition 2.0 9014 61672-1 Electroacoustics - Sound level meters - Part 1: Specifications - Edition 2.0 2002 IEC 0 9015 61559-2 Radiation in Nuclear Facilities - Centralized Systems for Continuous Monitoring of Radiation and/or Levels of 2002 IEC 0 Radioactivity - Part 2: Requirements for Discharge, Environmental, Accident, or Post-Accident Monitoring Functions - Edition 1.0 9016 61479 Live Working - Flexible Conductor Covers (Line Hoses) of Insulating Material - Edition 1.1 Consolidated Reprint 2002 IEC 0 9017 61377-2 NULL 2002 IEC 0 9018 61377-3 NULL 2002 IEC 0 9019 61340-2-1 Electrostatics Part 2-1: Measurement methods Ability of materials and products to dissipate static electric charge - Edition 2002 IEC 0 2.0 9020 61386-21 Conduit Systems for Cable Management - Part 21: Particular Requirements - Ridgid Conduit Systems - Edition 1.0 2002 IEC 0 9021 61386-22 Conduit Systems for Cable Management - Part 22: Particular Requirements - Pliable Conduit Systems - Edition 1.0 2002 IEC 0 9022 61386-23 Conduit Systems for Cable Management - Part 23: Particular Requirements - Flexible Conduit Systems - Edition 1.0 2002 IEC 0 9023 61466-2 Composite String Insulator Units for Overhead Lines with a Nominal Voltage Greater Than 1 000 V - Part 2: Dimensional 2002 IEC 0 and Electrical Characteristics - Edition 1.1 Consolidated Reprint 9024 61378-2 Convertor Transformers - Part 2: Transformers for HVDC Applications - Edition 1.0 2001 IEC 0 9025 61340-4-3 Electrostatics - Part 4-3: Standard Test Methods for Specific Applications - Footwear - Edition 1.0 2001 IEC 0 9026 61347-2-11 Lamp Controlgear - Part 2-11: Particular Requirements for Miscellaneous Electronic Circuits Used with Luminaries - 2001 IEC 0 Edition 1.0; Includes Corrigendum 1: 12/2001 9027 61518 Mating Dimensions between Differential Pressure (Type) Measuring Instruments and Flanged-On Shut-Off Devices up to 2001 IEC 0 413 Bar (41,3 MPa) - Edition 1.0 9028 61512-2 Batch Control - Part 2: Data Structures and Guidelines for Languages - Edition 1.0 2001 IEC 0 9029 61512-2(2 NULL 2001 IEC 0 9030 61584 Radiation Protection Instrumentation - Installed, Portable or Transportable Assemblies - Measurement of Air Kerma 2001 IEC 0 Direction and Air Kerma Rate - Edition 1.0 9031 61562 Radiation Protection Instrumentation - Portable Equipment for Measuring Specific Activity of Beta-Emitting Radionuclides 2001 IEC 0 in Foodstuffs - Edition 1.0 9032 61563 Radiation Protection Instrumentation - Equipment for Measuring Specific Activity of Gamma-Emitting Radionuclides in 2001 IEC 0 Foodstuffs - Edition 1.0 9033 61685 Ultrasonics - Flow Measurement Systems - Flow Test Object - Edition 1.0 2001 IEC 0 9034 61703 Mathematical Expressions for Reliability, Availability, Maintainability and Maintenance Support Terms - Edition 2.0 2001 IEC 0 9035 61603-6 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation - Part 6: Video and Audio-Visual 2001 IEC 0 Signals - Edition 1.0 9036 61631 Test Method for the Mechanical Strength of Cores Made of Magnetic Oxides - Edition 1.0 2001 IEC 0 9037 61643-341 Components for Low-Voltage Surge Protective Devices - Part 341: Specification for Thyristor Surge Suppressors (TSS) - 2001 IEC 0 Edition 1.0 9038 61643-321 Components for Low-Voltage Surge Protective Devices - Part 321: Specification for Avalanche Breakdown Diode (ABD) - 2001 IEC 0 Edition 1.0 9039 61669 Electroacoustics Measurement of real-ear acoustical performance characteristics of hearing aids - Edition 2.0 2001 IEC 0 9040 61754-18 Fibre Optic Connector Interfaces - Part 18: Type MT-RJ Connector Family - Edition 1.0 2001 IEC 0 9041 61754-19 Fibre Optic Connector Interfaces - Part 19: Type SG Connector Family - Edition 1.0 2001 IEC 0 9042 62099 Fibre Optic Wavelength Switches - Generic Specification - Edition 1.0 2001 IEC 0 9043 62070 Broadcast Digital Video Tape Recorders - Identification Method for Recording and/or Reproduction Error Status - Edition 2001 IEC 0 1.0 9044 62088 Nuclear Instrumentation - Photodiodes for Scintillation Detectors - Test Procedures - Edition 1.0 2001 IEC 0 9045 62089 Nuclear Instrumentation - Calibration and Usage of Alpha/Beta Gas Proportional Counters - Edition 1.0 2001 IEC 0 9046 61966-8 Multimedia Systems and Equipment - Colour Measurement and Management - Part 8: Multimedia Colour Scanners - 2001 IEC 0 Edition 1.0 9047 62005-1 Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 1: Introductory Guide and Definitions - 2001 IEC 0 Edition 1.0 9048 62005-2 Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 2: Quantitative Assessment of Reliability 2001 IEC 0 Based on Accelerated Ageing Tests - Temperature and Humidity; Steady State - Edition 1.0 9049 62005-3 Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 3: Relevant Tests for Evaluating Failure 2001 IEC 0 Modes and Failure Mechanisms for Passive Components - Edition 1.0 9050 62014-1 Electronic Design Automation Libraries - Part 1: Input/Output Buffer Information Specifications (IBIS Version 3.2) - 2001 IEC 0 Edition 1.0 9051 61882 Hazard and operability studies (HAZOP studies) Application guide - Edition 2.0 2001 IEC 0 9052 61865 Overhead Lines - Calculation of the Electrical Component of Distance between Live Parts and Obstacles - Method of 2001 IEC 0 Calculation - Edition 1.0 9053 61851-21 Electric Vehicle Conductive Charging System - Part 21: Electric Vehicle Requirements for Conductive Connection to an 2001 IEC 0 A.C./D.C. Supply - Edition 1.0; Replaces IEC 60718 9054 61851-22 Electric Vehicle Conductive Charging System - Part 22: AC Electric Vehicle Charging Station - Edition 1.0; Replaces IEC 2001 IEC 0 60718 9055 61947-2 Electronic projection Measurement and documentation of key performance criteria Part 2: Variable resolution projectors - 2001 IEC 0 Edition 1.0 9056 61834-7 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 7: Format EDTV2 - Edition 1.0 9057 61834-8 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 8: PALplus Format for the 625-50 System - Edition 1.0 9058 61834-9 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 IEC 0 (525-60, 625-50, 1125-60, 1250-50 Systems) - Part 9: DVB Format - Edition 1.0 9059 61834-1 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 IEC 0 (525-60, 625-50, 1125-60, and 1250-50 Systems) - Part 1: General Specifications - Edition 1.1 Consolidated Reprint 9060 61834-10 Recording - Helican-Scan Digital Video Cassette Recording System Using 6,35mm Magnetic Tape for Consumer Use 2001 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 10: DTV Format - Edition 1.0; Includes Corrigendum 1: 06/2001 9061 61828 Ultrasonics - Focusing Transducers - Definitions and Measurement Methods for the Transmitted Fields - Edition 1.0 2001 IEC 0 9062 82045-1 Document Management - Part 1: Principles and Methods - Edition 1.0 2001 IEC 0 9063 62156 Digital Video Recording with Video Compression 12,65 mm Type D-9 Component Format 525/60 and 625/50 (Digital S) - 2001 IEC 0 Edition 1.0 9064 62198 Managing risk in projects - Application guidelines - Edition 2.0 2001 IEC 0 9065 62121 Methods of Measurement for Minidisc Recorders/Players - Edition 1.0 2001 IEC 0 9066 IECEX TR NULL 2001 IEC 0 61241-4 9067 IECEX TR NULL 2001 IEC 0 62086-1 9068 TR 60695-11- Fire Hazard Testing - Part 11-30: Test Flames - History and Development from 1979 to 1999 - Edition 1.0 2001 IEC 0 30 9069 TR 62060 Secondary Cells and Batteries - Monitoring of Lead Acid Stationary Batteries - User Guide - Edition 1.0 2001 IEC 0 9070 TR 61997 Guidelines for the User Interface in multimedia Equipment for General Purpose Use - Edition 1.0 2001 IEC 0 9071 TR 61948-1 Nuclear Medicine Instrumentation - Routine Tests - Part 1: Radiation Counting Systems - Edition 2.0 2001 IEC 0 9072 TR 61948-2 Nuclear Medicine Instrumentation - Routine Tests - Part 2: Scintillation Cameras and Single Photon Emission Computed 2001 IEC 0 Tomography Imaging - Edition 1.0 9073 TR 62157 Cylindrical Machined Carbon Electrodes - Nominal Dimensions - Edition 1.0 2001 IEC 0 9074 TS 61334-5-3 Distribution Automation Using Distribution Line Carrier Systems - Part 5-3 Lower-Layer Profiles - Spread Spectrum 2001 IEC 0 Adaptive Wideband (SS-AW) Profile - Edition 1.0 9075 TS 61334-5-4 Distribution Automation Using Distribution Line Carrier Systems - Part 5-4: Lower Layer Profiles - Multi-Carrier 2001 IEC 0 Modulation (MCM) Profile - Edition 1.0 9076 TS 61334-5-5 Distribution Automation Using Distribution Line Carrier Systems - Part 5-5: Lower Layer Profiles - Spread Spectrum-Fast 2001 IEC 0 Frequency Hopping (SS-FFH) Profile - Edition 1.0 9077 TS 61400-13 NULL 2001 IEC 0 9078 TS 61287-2 Power Converters Installed on Board Railway Rolling Stock Part 2: Additional Technical Information - Edition 1.0 2001 IEC 0 9079 TS 61400-23 NULL 2001 IEC 0 9080 TS 60870-6-602 Telecontrol Equipment and Systems - Part 6-602: Telecontrol Protocols Compatible with ISO Standards and ITU-T 2001 IEC 0 Recommendations - TASE Transport Profiles - Edition 1.0 9081 TS 61000-6-5 NULL 2001 IEC 0 9082 60598-2-23 Luminaires - Part 2-23: Particular Requirements - Extra Low Voltage Lighting Systems for Filament Lamps - Edition 1.1 2001 IEC 0 Consolidated Reprint 9083 60534-3-1 Industrial-Process Control Valves - Part 3-1: Dimensions - Face-to-Face Dimensions for Flanged, Two-Way, Globe-Type, 2001 IEC 0 Straight Pattern and Centre-To-Face Dimensions for Flanged, Two-Way, Globe-Type, Angle Pattern Control Valves - Edition 1.0; Supersedes IE 9084 60534-3-2 Industrial-Process Control Valves - Part 3-2: Dimensions - Face-to-Face Dimensions for Rotary Control Valves Except 2001 IEC 0 Butterfly Valves - Edition 2.0 9085 60554-2 Cellulosic papers for electrical purposes Part 2: Methods of test - Edition 2.0 2001 IEC 0 9086 60554-2(2 NULL 2001 IEC 0 9087 60605-4 Equipment Reliability Testing - Part 4: Statistical Procedures for Exponential Distribution - Point Estimates, Confidence 2001 IEC 0 Intervals, Prediction Intervals and Tolerance Intervals - Edition 2.0 9088 60623 Secondary cells and batteries containing alkaline or other non-acid electrolytes Vented nickel-cadmium prismatic 2001 IEC 0 rechargeable single cells - Edition 5.0 9089 60627 Diagnostic X-ray imaging equipment Characteristics of general purpose and mammographic anti-scatter grids - Edition 3.0 2001 IEC 0 9090 60512-1 Connectors for Electronic Equipment - Tests and Measurements - Part 1: General - Edition 4.0 2001 IEC 0 9091 60454-3-14 Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 14: 2001 IEC 0 Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive - Edition 1.0 9092 60464-3-2 Varnishes used for electrical insulation Part 3: Specifications for individual materials Sheet 2: Hot curing impregnating 2001 IEC 0 varnishes - Edition 2.1 Consolidated Reprint 9093 60464-2 Varnishes used for electrical insulation - Part 2: Methods of test - Edition 2.1 Consolidated Reprint 2001 IEC 0 9094 60464-3-1 Varnishes used for electrical insulation Part 3: Specifications for individual materials Sheet 1: Ambient curing finishing 2001 IEC 0 varnishes - Edition 2.1 Consolidated Reprint 9095 60512-12-7 Connectors for Electronic Equipment - Tests and Measurements - Part 12-7: Soldering Tests - Test 12g: Solderability, 2001 IEC 0 Wetting Balance Method - Edition 1.0 9096 60512-23-4 Connectors for Electronic Equipment - Tests and Measurements - Part 23-4: Screening and Filtering Tests - Test 23d: 2001 IEC 0 Transmission Line Reflections in the Time Domain - Edition 1.0 9097 60512-25-3 Connectors for Electronic Equipment - Test and Measurements - Part 25-3: Test 25c - Rise Time Degradation - Edition 1.0 2001 IEC 0 9098 60512-25-4 Connectors for Electronic Equipment - Test and Measurements - Part 25-4: Test 25d - Propagation Delay - Edition 1.0 2001 IEC 0 9099 60512-25-1 Connectors for Electronic Equipment - Tests and Measurements - Part 25-1: Test 25a - Crosstalk Ratio - Edition 1.0 2001 IEC 0 9100 60529 Degrees of Protection Provided by Enclosures (IP Code) - Edition 2.2 Consolidated Reprint 2001 IEC 0 9101 60359 Electrical and Electronic Measurement Equipment -Expression of Performance - Edition 3.0 2001 IEC 0 9102 60424-4 Ferrite cores Guidelines on the limits of surface irregularities Part 4: Ring-cores - Edition 2.0 2001 IEC 0 9103 60322 Railway Applications - Electric Equipment for Rolling Stock - Rules for Power Resistors of Open Construction - Edition 2001 IEC 0 2.0 9104 60317-51 Specifications for particular types of winding wires Part 51: Solderable polyurethane enamelled round copper wire, class 2001 IEC 0 180 - Edition 2.0 9105 60034-7 Rotating Electrical Machines - Part 7: Classification of Types of Construction, Mounting Arrangements and Terminal Box 2001 IEC 0 Position (IM Code) - Edition 2.1 Consolidated Reprint 9106 60050-195 Amendment 1 International Electrotechnical Vocabulary - Part 195: Earthing and Protection Against Electric Shock - 2001 IEC 0 AMD 1 Edition 1.0 9107 60050-300 International Electrotechnical Vocabulary Electrical and Electronic Measurements and Measuring Instruments Part 311: 2001 IEC 0 General Terms Relating to Measurements Part 312: General Terms Relating to Electrical Measurements Part 313: Types of Electrical Measuring 9108 60050-151 International Electrotechnical Vocabulary Part 151: Electrical and Magnetic Devices - Edition 2.0 2001 IEC 0 9109 60050-551-20 International Electrotechnical Vocabulary Part 551-20: Power electronics - Harmonic analysis - Edition 1.0 2001 IEC 0 9110 60077-3 Railway Applications - Electric Equipment for Rolling Stock - Part 3: Electrotechnical Components - Rules for d.c. Circuit- 2001 IEC 0 Breakers - Edition 1.0 9111 60076-10 Power Transformers - Part 10: Determination of Sound Levels - Edition 2.0 2001 IEC 0 9112 60068-3-4 Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests - Edition 1.0 2001 IEC 0 9113 60068-3-5 Environmental Testing - Part 3-5: Supporting Documentation and Guidance - Confirmation of the Performance of 2001 IEC 0 Temperature Chambers - Edition 1.0; Should Be Read in Conjunction with IEC 60068-3-6 and IEC 60068-3-7 9114 60068-3-6 Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of 2001 IEC 0 Temperature/Humidity Chambers - Edition 1.0; Should Be Read in Conjunction with IEC 60068-3-5 and IEC 60068-3-7 9115 60068-3-7 Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for 2001 IEC 0 Tests A and B (with Load) - Edition 1.0; Should Be Read in Conjunction with IEC 60068-3-5 and IEC 60068-3-6 9116 60191-6-5 Mechanical Standardization of Semiconductor Devices - Part 6-5: General Rules for the Preparation of Outline Drawings of 2001 IEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Fine Pitch-Pitch Ball Grid Array (FBGA) - Edition 1.0 9117 60191-6-6 Mechanical Standardization of Semiconductor Devices - Part 6-6: General Rules for the Preparation of Outline Drawings of 2001 IEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Fine Pitch Land Grid Array (FLGA) - Edition 1.0 9118 60191-6-8 Mechanical Standardization of Semiconductor Devices - Part 6-8: General Rules for the Preparation of Outline Drawings of 2001 IEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Glass Sealed Ceramic Quad Flatpack (G-QFP) - Edition 1.0 9119 60192 Low-Pressure Sodium Vapour Lamps - Performance Specifications - Edition 3.0 2001 IEC 0 9120 60191-6-2 Mechanical Standardization of Semiconductor Devices - Part 6-2: General Rules for the Preparation of Outline Drawings of 2001 IEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for 1,50 mm, 1,27 mm and 1,00 mm Pitch Ball and Column Terminal Packages 9121 60191-6-1 Mechanical Standardization of Semiconductor Devices - Part 6-1: General Rules for the Preparation of Outline Drawings of 2001 IEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Gull-Wing Lead Terminals - Edition 1.0 9122 60188 High-Pressure Mercury Vapour Lamps - Performance Specifications - Edition 3.0 2001 IEC 0 9123 60191-2 AMD Amendment 1 Mechanical standardization of semiconductor devices - Part 2: Dimensions - Edition 1.0 2001 IEC 0 1 9124 60191-2 AMD Amendment 2 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2001 IEC 0 2 9125 60191-2 AMD Amendment 3 Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2001 IEC 0 3 9126 60191-2 AMD Amendment 4 Mechanical standardization of semiconductor devices - Part 2: Dimensions - Edition 1.0 2001 IEC 0 4 9127 60168 Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater 2001 IEC 0 Than 1 000 V - Edition 4.2; Consolidated Reprint 9128 60127-10 Miniature Fuses - Part 10: User Guide for Miniature Fuses - Edition 1.0 2001 IEC 0 9129 60092-504 Electrical installations in ships Part 504: Automation, control and instrumentation - Edition 4.0 2001 IEC 0 9130 60243-2 Electric strength of insulating materials Test methods Part 2: Additional requirements for tests using direct voltage - 2001 IEC 0 Edition 3.0 s impulse tests - 2001 IEC 0_خ Electric strength of insulating materials Test methods Part 3: Additional requirements for 1,2/50 60243-3 9131 Edition 3.0 9132 60227-6 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 6: Lift Cables and Cables for 2001 IEC 0 Flexible Connections - Edition 3.0 9133 60270 CORR 1 NULL 2001 IEC 0 9134 60264-5-2 Packaging of Winding Wires - Part 5-2: Cylindrical Barrelled Delivery Spools with Conical Flanges - Specification for 2001 IEC 0 Returnable Spools Made from Thermoplastic Material - Edition 1.0 9135 60300-3-5 Dependability Management - Part 3-5: Application Guide - Reliability Test Conditions and Statistical Test Principles - 2001 IEC 0 Edition 1.0 9136 60300-3-10 Dependability Management - Part 3-10: Application Guide - Maintainability - Edition 1.0 2001 IEC 0 9137 60811-1-3 NULL 2001 IEC 0 9138 60794-3 Optical fibre cables Part 3: Outdoor cables Sectional specification - Edition 4.0 2001 IEC 0 9139 60819-2 Non-Cellulosic Papers for Electrical Purposes - Part 2: Methods of Test - Edition 1.0 2001 IEC 0 9140 60819-3-1 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specification for Individual Materials - Sheet 1: Filled Glass Paper - 2001 IEC 0 Edition 1.0 9141 60819-3-2 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Hybrid Inorganic- 2001 IEC 0 Organic Paper - Edition 1.0 9142 60819-3-4 Non-cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 4: Aramid fibre paper 2001 IEC 0 containing not more than 50 % of mica particles - Edition 2.0 9143 60811-3-1 NULL 2001 IEC 0 AMD 2 9144 60811-1-1 NULL 2001 IEC 0 9145 60811-1-4 NULL 2001 IEC 0 AMD 2 9146 60811-2-1 NULL 2001 IEC 0 9147 60839-7-1 Alarm systems - Part 7-1: Message formats and protocols for serial data interfaces in alarm transmission systems - General 2001 IEC 0 - Edition 1.0 9148 60839-7-11 Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarm transmission systems - Serial 2001 IEC 0 protocol for use by digital communicator systems using ITU-T Recommandation V.23 signalling at interfaces with the PSTN - Edition 1. 9149 60839-7-12 Alarm systems - Part 7-12: Message formats and protocols for serial data interfaces in alarm transmission systems - PTT 2001 IEC 0 interfaces for dedicated communications channels using ITU-T Recommendation V.23 signalling - Edition 1.0 9150 60839-7-2 Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarm transmission systems - 2001 IEC 0 Common application layer protocol - Edition 1.0 9151 60839-7-20 Alarm systems - Part 7-20: Message formats and protocols for serial data interfaces in alarm transmission systems - 2001 IEC 0 Terminal interfaces employing ITU-T Recommendation V.24/V.28 signalling - Edition 1.0 9152 60839-7-3 Alarm systems - Part 7-3: Message formats and protocols for serial data interfaces in alarm transmission systems - 2001 IEC 0 Common data link layer protocol - Edition 1.0 9153 60839-7-4 Alarm systems - Part 7-4: Message formats and protocols for serial data interfaces in alarm transmission systems - 2001 IEC 0 Common transport layer protocol - Edition 1.0 9154 60839-7-5 Alarm systems - Part 7-5: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm 2001 IEC 0 system interfaces employing a two-wire configuration in accordance with ISO/IEC 8482 - Edition 1.0 9155 60839-7-6 Alarm systems - Part 7-6: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm 2001 IEC 0 system interfaces employing ITU-T Recommendation V.24/V.28 signalling - Edition 1.0 9156 60839-7-7 Alarm systems - Part 7-7: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm 2001 IEC 0 system interfaces for plug-in alarm system transceivers - Edition 1.0 9157 60953-3 Rules for Steam Turbine Thermal Acceptance Tests - Part 3: Thermal Performance Verification Tests of Retrofitted Steam 2001 IEC 0 Turbines - Edition 1.0 9158 60969 Self-Ballasted Lamps for General Lighting Services - Performance Requirements - Edition 2.0 2001 IEC 0 9159 60901 Single-Capped Fluorescent Lamps - Performance Requirements - Edition 2.2 Consolidated Reprint 2001 IEC 0 9160 60909-0 Short-circuit currents in three-phase a.c. systems Part 0: Calculation of currents - Edition 2.0 2001 IEC 0 9161 60748-2-12 Semiconductor Devices - Integrated Circuits - Part 2-12: Digital Integrated Circuits - Blank Detail Specification for 2001 IEC 0 Programmable Logic Devices (PLDs) - Edition 1.0 9162 60793-1-20 Optical fibres Part 1-20: Measurement methods and test procedures Fibre geometry - Edition 2.0 2001 IEC 0 9163 60793-1-21 Optical Fibres - Part 1-21: Measurement Methods and Test Procedures - Coating Geometry - Edition 1.0; Together with the 2001 IEC 0 Other Standards in the IEC 60793-1-2X Series, Cancels and Replaces the First Edition of IEC 60793-1-2 9164 60793-1-22 Optical Fibres - Part 1-22: Measurement Methods and Test Procedures - Length Measurement - Edition 1.0; Together with 2001 IEC 0 the Other Standards in the IEC 60793-1-2X Series 9165 60793-1-33 Optical Fibres - Part 1-33: Measurement Methods and Test Procedures - Stress Corrosion Susceptibility - Edition 1.0; 2001 IEC 0 Together with the Other Standards in the IEC 60793-1-3X Series, Cancels and Replaces the Second Edition of IEC 60793- 1-3 9166 60793-1-40 Optical Fibres - Part 1-40: Measurement and Test Procedures - Attenuation - Edition 1.0 2001 IEC 0 9167 60793-1-43 Optical fibres Part 143: Measurement methods and test procedures Numerical aperture measurement - Edition 2.0 2001 IEC 0 9168 60793-1-45 Optical Fibres - Part 1-45: Measurement Methods and Test Procedures - Mode Field Diameter - Edition 1.0; Together with 2001 IEC 0 the Other Standards in the IEC 60793-1-4X Series, Replaces the Second Edition of IEC 60793-1-4 9169 60793-1-46 Optical Fibres - Part 1-46: Mesurement Methods and Test Procedures - Monitoring of Changes in Optical Transmittance - 2001 IEC 0 Edition 1.0 9170 60793-1-50 Optical fibres Part 1-50: Measurement methods and test procedures Damp heat (steady state) tests - Edition 2.0 2001 IEC 0 9171 60793-1-51 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests - Edition 2.0 2001 IEC 0 9172 60793-1-52 Optical fibres Part 1-52: Measurement methods and test procedures Change of temperature tests - Edition 2.0 2001 IEC 0 9173 60793-1-53 Optical Fibres - Part 1-53: Measurement Methods and Test Procedures - Water Immersion - Edition 1.0 2001 IEC 0 9174 60728-12 Cabled Distribution Systems for Television and Sound Signals - Part 12: Electromagnetic Compatibility of Systems - 2001 IEC 0 Edition 1.0 9175 60674-2 AMD NULL 2001 IEC 0 1 9176 60684-3-145 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 145 to 147: Extruded PTFE 2001 IEC 0 TO 147 Sleeving - Edition 1.0 9177 60684-3-100 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 100 to 105: Extruded PVC 2001 IEC 0 TO 105 Sleeving - Edition 2.0 9178 60684-3-121 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 121 and 124: Extruded 2001 IEC 0 TO 124 Silicone Sleeving - Edition 2.0; Supersedes IEC 60684-3-123 AND 124: 1992 9179 61204 Low-Voltage Power Supply Devices, D.C. Output - Performance Characteristics - Edition 1.1 Consolidated Reprint 2001 IEC 0 9180 61241-4 NULL 2001 IEC 0 9181 61249-2-19 Materials for Printed Boards and Other Interconnecting Structures - Part 2-19: Reinforced Base Materials, Clad and Unclad 2001 IEC 0 - Exoxide Cross-Plied Linear Fibreglass-Reinforced Laminated Sheets of Defined Flammability (Vertical Burning Test), Copper-Clad - Ed 9182 61249-2-4 Materials for Printed Boards and Other Interconnecting Structures - Part 2-4: Reinforced Base Materials, Clad and Unclad - 2001 IEC 0 Polyester Non-Woven/Woven Fibreglass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad - Edition 1.0; Rep 9183 61189-1 Test Methods for Electrical Materials, Interconnection Structures and Assemblies - Part 1: General Test Methods and 2001 IEC 0 Methodology - Edition 1.1 Consolidated Reprint 9184 61189-1(2 NULL 2001 IEC 0 9185 61193-1 Quality Assessment Systems - Part 1: Registration and Analysis of Defects on Printed Board Assemblies - Edition 1.0 2001 IEC 0 9186 61334-5-1 Distribution Automation Using Distribution Line Carrier Systems - Part 5-1: Lower Layer Profiles - The Spread Frequency 2001 IEC 0 Shift Keying (S-FSK) Profile - Edition 2.0 9187 61334-4-512 Distribution Automation Using Distribution Line Carrier Systems - Part 4-512: Data Communication Protocols - Systems 2001 IEC 0 Management Using Profile 61334-5-1 - Management Information Base (MIB) - Edition 1.0 9188 61334-3-22 Distribution Automation Using Distribution Line Carrier Systems - Part 3-22: Mains Signalling Requirements - MV Phase- 2001 IEC 0 to-Earth and Screen-to-Earth Intrusive Coupling Devices - Edition 1.0 9189 61300-3-20 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-20: 2001 IEC 0 Examinations and Measurements - Directivity of Fibre Optic Branching Devices - Edition 1.0 9190 61286 NULL 2001 IEC 0 9191 61000-4-10 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic 2001 IEC 0 field immunity test - Edition 2.0 9192 61000-5-7 Electromagnetic Compatibility (EMC) - Part 5-7: Installation and Mitigation Guidelines - Degrees of Protection Provided 2001 IEC 0 by Enclosures Against Electromagnetic Disturbances (EM Code) - Edition 1.0 9193 61000-4-9 Electromagnetic compatibility (EMC) Part 4-9: Testing and measurement techniques Impulse magnetic field immunity 2001 IEC 0 test - Edition 2.0 9194 61061-3-2 Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - 2001 IEC 0 Sheet 2: Rings Produced from Beech Veneer - Edition 1.0 9195 61061-2 Specification for Non-Impregnated, Densified Laminated Wood for Electrical Purposes - Part 2: Methods of Test - Edition 2001 IEC 0 1.1; Consolidated Reprint 9196 61029-2-11 Safety of Transportable Motor-Operated Electric Tools - Part 2-11: Particular Requirements for Mitre-Bench Saws - 2001 IEC 0 Edition 1.0 9197 61029-2-4 Amendment 1 Safety of transportable motor-operated electric tools Part 2-4: Particular requirements for bench grinders - 2001 IEC 0 AMD 1 Edition 1.0 9198 61029-2-3 Safety of Transportable Motor-Operated Electric Tools - Part 2-3: Particular Requirements for Planers and Thicknessers - 2001 IEC 0 AMD 1 Edition 1.0 9199 61029-2-5 Amendment 1 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for band saws - Edition 2001 IEC 0 AMD 1 1.0 9200 61094-5 Electroacoustics Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by 2001 IEC 0 comparison - Edition 2.0 9201 61076-4-107 Connectors for Electronic Equipment - Part 4-107: Printed Board Connectors with Assessed Quality - Detail Specification 2001 IEC 0 for Shielded Two-Part Connectors Having a Basic Grid of 2,0 mm, Fixed Part with Solder and Press-In Terminations for Printed Boards, Fr 9202 61076-4-110 Connectors for Electronic Equipment - Part 4-110: Printed Board Connectors with Assessed Quality - Detail Specification 2001 IEC 0 for Latched Cable Connector System Having a Basic Grid of 2,0 mm Including Full Shielded and Latching Function - Edition 1.0; QC 480301 9203 61076-4-100 Connectors for Electronic Equipment - Part 4-100: Printed Board Connectors with Assessed Quality - Detail Specification 2001 IEC 0 for Two-Part Connector Modules Having a Grid of 2,5 mm for Printed Boards and Backplanes - Edition 2.0; IECQ QC 480301/XX 0001 9204 61076-4-101 Connectors for Electronic Equipment - Part 4-101: Printed Board Connectors with Assessed Quality - Detail Specification 2001 IEC 0 for Two-Part Connector Modules, Having a Basic Grid of 2,0mm for Printed Boards and Backplanes in Accordance with IEC 60917 - Edition 2 9205 61083-1 Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments - 2001 IEC 0 Edition 2.0; Replaces IEC 60790 Ed. 1.0:1984 9206 61156-1-1 Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 1-1: Capability Approval - Generic 2001 IEC 0 Specification - Edition 1.0 9207 61156-2-2 Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 2-2: Horizontal Floor Wiring - Capability 2001 IEC 0 Approval - Sectional Specification - Edition 1.0 9208 61156-3-2 Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 1-2: Work Area Wiring - Capability 2001 IEC 0 Approval - Sectional Specification - Edition 1.0 9209 61156-4-2 Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 4-2: Riser Cables - Capability Approval - 2001 IEC 0 Sectional Specification - Edition 1.0 9210 61162-400 NULL 2001 IEC 0 9211 61162-410 NULL 2001 IEC 0 9212 61162-420 NULL 2001 IEC 0 9213 61131-7 Programmable Controllers - Part 7: Fuzzy Control Programming - Edition 1.0 2000 IEC 0 9214 61131-5 Programmable Controllers - Part 5: Communications - Edition 1.0 2000 IEC 0 9215 61076-7 Connectors for Use in D.C., Low-Frequency Analogue and Digital High-Speed Data Applications - Part 7: Cable Outlet 2000 IEC 0 Accessories with Assessed Quality, Including Qualification and Capability Approval - Sectional Specification - Edition 1.0 9216 61094-1 Measurement Microphones - Part 1: Specifications for Laboratory Standard Microphones - Edition 2.0 2000 IEC 0 9217 61000-3-11 Electromagnetic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations and flicker in 2000 IEC 0 public low-voltage supply systems Equipment with rated current â_¤75 A and subject to conditional connection - Edition 2.0 9218 61000-4-29 Electromagnetic Compatibility (EMC) - Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short 2000 IEC 0 Interruptions and Voltage Variations on d.c. Input Power Port Immunity Tests - Edition 1.0 9219 61000-4-23 Electromagnetic Compatibility (EMC) - Part 4-23: Testing and Measurement Techniques - Test Methods for Protective 2000 IEC 0 Devices for HEMP and Other Radiated Disturbances - Edition 2.0 9220 61300-2-40 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-40: Tests 2000 IEC 0 - Screen Testing of Attenuation of Single-Mode Tuned Angled Optical Connectors - Edition 1.0 9221 61300-3-36 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-36: 2000 IEC 0 Examinations and Measurements - Measurement Methods for the Inside and Outside Diameters of Fibre Optic Connector Ferrules - Edition 1.0 9222 61334-4-511 Distribution Automation Using Distribution Line Carrier Systems - Part 4-511: Data Communication Protocols - Systems 2000 IEC 0 MAnagement - CIASE Protocol - Edition 1.0 9223 61334-6 Distribution Automation Using Distribution Line Carrier Systems - Part 6: A-XDR Encoding Rule - Edition 1.0 2000 IEC 0 9224 61223-3-4 Evaluation and Routine Testing in Medical Imaging Departments - Part 3-4: Acceptance Tests - Imaging Performance of 2000 IEC 0 Dental X-Ray Equipment - Edition 1.0 9225 61204-6 Low-Voltage Power Supplies, D.C. Output - Part 6: Requirements for Low-Voltage Power Supplies of Assessed 2000 IEC 0 Performance - Edition 1.0 9226 61219 Live Working - Earthing or Earthing and Short-Circuiting Equipment Using Lances as a Short-Circuiting Device - Lance 2000 IEC 0 Earthing - Edition 1.0; Includes Corrigendum: 05/2000 9227 61219 CORR 1 NULL 2000 IEC 0 9228 60695-2-11 Fire hazard testing Part 2-11: Glowing/hot-wire based test methods Glow-wire flammability test method for end-products 2000 IEC 0 (GWEPT) - Edition 2.0 9229 60704-2-1 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-1: 2000 IEC 0 Particular requirements for vacuum cleaners - Edition 3.0 9230 60747-6 Semiconductor devices - Part 6: Discrete devices - Thyristors - Edition 3.0 2000 IEC 0 9231 60747-2 Semiconductor devices - Part 2: Discrete devices - Rectifier diodes - Edition 3.0 2000 IEC 0 9232 60747-14-2 Semiconductor Devices - Part 14-2: Semiconductor Sensors - Hall Elements - Edition 1.0 2000 IEC 0 9233 60728-9 Cabled Distribution Systems for Television and Sound Signals - Part 9: Interfaces of Cabled Distribution Systems for 2000 IEC 0 Digitally Modulated Signals - Edition 1.0; Includes Amendment 1: 06/2005 9234 60843-4 Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape (8 mm Video) - Part 4: Video Subcode (VSC) - 2000 IEC 0 Edition 1.0 9235 60811-1-2 NULL 2000 IEC 0 AMD 2 9236 60270 High-voltage test techniques Partial discharge measurements - Edition 3.1; Consolidated Reprint 2000 IEC 0 9237 60204-11 Safety of Machinery - Electrical Equipment of Machines - Part 11: Requirements for HV Equipment for Voltages Above 1 2000 IEC 0 000 V a.c. or 1 500 V d.c. and Not Exceeding 36 kV - Edition 1.0 9238 60216-4-2 Elecrical Insulating Materials - Thermal Endurance Properties - Part 4-2: Ageing Ovens - Precision Ovens for Use Up to 2000 IEC 0 300 Degrees Celsius - Edition 1.0 9239 60216-4-3 Elecrical Insulating Materials - Thermal Endurance Properties - Part 4-3: Ageing Ovens - Multi-Chamber Ovens - Edition 2000 IEC 0 1.0 9240 60255-5 NULL 2000 IEC 0 9241 60139 Preparation of Outline Drawings for Cathode-Ray Tubes, Their Components, Connections and Gauges - Edition 2.0 2000 IEC 0 9242 60191-2X Mechanical standardization of semiconductor devices Part 2: Dimensions - Edition 1.0 2000 IEC 0 CORR 1 9243 60191-2Z Twenty-fourth supplement to Publication 60191-2 (1966) Mechanical standardization of semiconductor devices Part 2: 2000 IEC 0 Dimensions - Edition 1.0 9244 60191-6-3 Mechanical Standardization of Semiconductor Devices - Part 6-3: General Rules for the Preparation of Outline Drawings of 2000 IEC 0 Surface Mounted Semiconductor Device Packages - Measuring Methods for Package Dimensions of Quad Flat Packs (QFP) - Edition 1.0 9245 60068-2-18 Environmental testing Part 2-18: Tests Test R and guidance: Water - Edition 3.0 2000 IEC 0 9246 60076-3 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air - Edition 3.0 2000 IEC 0 9247 60050-815 International Electrotechnical Vocabulary Part 815: Superconductivity - Edition 2.0 2000 IEC 0 9248 60034-18-22 NULL 2000 IEC 0 9249 60317-4 Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 2000 IEC 0 130 - Edition 4.0 9250 60317-38 Specifications for Particular Types of Winding Wires - Part 38: Polyester or Polyesterimide Overcoated with Polyamide- 2000 IEC 0 Imide Enamelled Round Copper Wire, Class 200, with a Bonding Layer - Edition 2.0 9251 60317-36 Specifications for Particular Types of Winding Wires - Part 36: Solderable Polyesterimide Enamelled Round Copper Wire, 2000 IEC 0 Class 180, with a Bonding Layer - Edition 2.0 9252 60317-37 Specifications for Particular Types of Winding Wires - Part 37: Polyesterimide Enamelled Round Copper Wire, Class 180, 2000 IEC 0 with a Bonding Layer - Edition 2.0 9253 60317-35 Specifications for Particular Types of Winding Wires - Part 35: Solderable Polyurethane Enamelled Round Copper Wire, 2000 IEC 0 Class 155, with a Bonding Layer - Edition 2.0 9254 60317-19 NULL 2000 IEC 0 9255 60317-20 Specifications for Particular Types of Winding Wires - Part 20: Solderable Polyurethane Enamelled Round Copper Wire, 2000 IEC 0 Class 155 - Edition 3.0 9256 60317-21 Specifications for Particular Types of Winding Wires - Part 21: Solderable Polyurethane Enamelled Round Copper Wire 2000 IEC 0 Overcoated with Polyamide, Class 155 - Edition 3.0 9257 60317-23 Specifications for Particular Types of Winding Wires - Part 23: Solderable Polyesterimide Enamelled Round Copper Wire, 2000 IEC 0 Class 180 - Edition 3.0 9258 60320-2-1 Appliance Couplers for Household and Similar General Purposes - Part 2-1: Sewing Machine Couplers - Edition 2.0 2000 IEC 0 9259 60332-3-21 Tests on Electric Cables Under Fire Conditions - Part 3-21: Test for Vertical Flame Spread of Vertically-Mounted Bunched 2000 IEC 0 Wires or Cables - Category A F/R - Edition 1.0 9260 60404-1 Magnetic materials Part 1: Classification - Edition 3.0 2000 IEC 0 9261 60368-4 Piezoelectric Filters of Assessed Quality - Part 4: Sectional Specification - Capability Approval - Edition 1.0 2000 IEC 0 9262 60368-4-1 Piezoelectric Filters of Assessed Quality - Part 4-1: Blank Detail Specification - Capability Approval - Edition 1.0 2000 IEC 0 9263 60364-7-740 Electrical Installations of Buildings - Part 7-740: Requirements for Special Installations or Locations - Temporary 2000 IEC 0 Electrical Installations for Structures, Amusement Devices and Booths at Fairgrounds, Amusement Parks and Circuses - Edition 1.0 9264 60352-4 AMD Amendment 1 Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General 2000 IEC 0 1 requirements, test methods and practical guidance - Edition 1.0 9265 60512-23-3 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 23-3: 2000 IEC 0 Test 23c: Shielding Effectiveness of Connectors and Accessories - Edition 1.0; Includes Corrigendum 1: 4/2003 9266 60512-20-2 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 20-2: 2000 IEC 0 Test 20b - Flammability Tests - Fireproofness - Edition 1.0 9267 60489-8 Methods of measurement for radio equipment used in the mobile services Part 8: Methods of measurement for antennas and 2000 IEC 0 ancillary equipment - Edition 1.0; Includes Amendment 1: 10/2000 9268 60534-6-2 Industrial-Process Control Valves - Part 6-2: Mounting Details for Attachment of Positioners to Control Valves - Positioner 2000 IEC 0 Mounting on Rotary Actuators - Edition 1.0 9269 60601-1-4 NULL 2000 IEC 0 9270 60580 Medical electrical equipment Dose area product meters - Edition 2.0 2000 IEC 0 9271 TS 61463 Bushings Seismic qualification - Edition 2.0 2000 IEC 0 9272 TS 61813 Live Working - Care, Maintenance and In-Service Testing of Aerial Devices with Insulating Booms - Edition 1.0 2000 IEC 0 9273 TS 61944 Integrated Circuits - Manufacturing Line Approval - Demonstration Vehicles - Edition 1.0 2000 IEC 0 9274 TS 61945 Integrated Circuits - Manufacturing Line Approval - Methodology for Technology and Failure Analysis - Edition 1.0 2000 IEC 0 9275 TS 62033 Attenuation Uniformity in Optical Fibres - Edition 1.0 2000 IEC 0 9276 TS 62098 Evaluation Methods for Microprocessor-Based Instruments - Edition 1.0 2000 IEC 0 9277 TS 60110-2 Power Capacitors for Induction Heating Installations - Part 2: Ageing Test, Destruction Test and Requirements for 2000 IEC 0 Disconnecting Internal Fuses - Edition 1.0 9278 TR 61660-3 Short-Circuit Currents in d.c. Auxiliary Installations in Power Plants and Substations - Part 3: Examples of Calculations - 2000 IEC 0 Edition 1.0 9279 TR 61340-2-2 Electrostatics - Part 2-2: Measurement Methods - Measurement of Chargeability - Edition 1.0 2000 IEC 0 9280 TR 60870-1-5 Telecontrol Equipment and Systems - Part 1-5: General Considerations - Influence of Modem Transmission Procedures 2000 IEC 0 with Scramblers on the Data Integrity of Transmission Systems Using the Protocol IEC 60870-5 - Edition 1.0 9281 TR 60909-4 Short-Circuit Currents in Three-Phase a.c. Systems - Part 4: Examples for the Calculation of Short-Circuit Currents - 2000 IEC 0 Edition 1.0; Shall Be Used in Conjunction with IEC 60909-0 9282 PAS 62162 Field-Induced Charged-Device Model Test Method for Electrostatic Discharge Withstand Thresholds of Microelectronic 2000 IEC 0 Components - Edition 1.0 9283 62151 Safety of Equipment Electrically Connected to a Telecommunication Network - Edition 1.0; Includes Corrigendum: 2000 2000 IEC 0 and Corrigendum 2: 06/2001 9284 GUIDE 113 NULL 2000 IEC 0 9285 61834-6 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2000 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 6: SDL Format - Edition 1.0 9286 61837-3 Surface mounted piezoelectric devices for frequency control and selection Standard outlines and terminal lead connections 2000 IEC 0 - Part 3: Metal enclosures - Edition 2.0 9287 61839 Nuclear Power Plants - Design of Control Rooms - Functional Analysis and Assignment - Edition 1.0 2000 IEC 0 9288 61966-3 Multimedia Systems and Equipment - Colour Measurement and Management - Part 3: Equipment Using Cathode Ray 2000 IEC 0 Tubes - Edition 1.0 9289 61966-4 Multimedia Systems and Equipment - Colour Measurement and Management - Part 4: Equipment Using Liquid Crystal 2000 IEC 0 Display Panels - Edition 1.0 9290 61904 Video Recording - Helical-Scan Digital Component Video Cassette Recording Format Using 12,65 mm Magnetic Tape and 2000 IEC 0 Incorporating Data Compression (Format Digital-L) - Edition 1.0 9291 61909 Audio Recording - Minidisc System - Edition 1.0 2000 IEC 0 9292 61991 Railways Applications - Rolling Stock - Protective Provisions Against Electrical Hazards - Edition 1.0 2000 IEC 0 9293 61976 Nuclear Instrumentation - Spectrometry - Characterization of the Spectrum Background in HPGe Gamma-Ray 2000 IEC 0 Spectrometry - Edition 1.0 9294 62107 Super Video Compact Disc - Disc-Interchange System-Specification - Edition 1.0 2000 IEC 0 9295 62044-3 Cores Made of Soft Magnetic Materials - Measuring Methods - Part 3: Magnetic Properties at High Excitation Level - 2000 IEC 0 Edition 1.0 9296 61753-2-1 Fiber Optic Interconnecting Devices and Passive Components Performance Standard - Part 2-1: Fibre Optic Connectors 2000 IEC 0 Terminated on Single-Mode Fibre for Category U - Uncontrolled Environment - Edition 1.0 9297 61690-1 Electronic Design Interchange Format (EDIF) Part 1: Version 300 - Edition 1.0; Includes Access to Additional Content 2000 IEC 0 9298 61690-2 Electronic Design Interchange Format (EDIF) Part 2: Version 400 - Edition 1.0; Includes Access to Additional Content 2000 IEC 0 9299 61577-2 Radiation Protection Instrumentation - Radon and Radon Decay Product Measuring Instruments - Part 2: Specific 2000 IEC 0 Requirements for Radon Measuring Instruments - Edition 2.0 9300 61504 Nuclear facilities - Instrumentation and control systems important to safety - Centralized systems for continuous monitoring 2000 IEC 0 of radiation and/or levels of radioactivity - Edition 2.0 9301 61514 Industrial-Process Control Systems - Methods of Evaluating the Performance of Valve Positioners with Pneumatic Outputs 2000 IEC 0 - Edition 1.0 9302 61520 Metal Thermowells for Thermometer Sensors - Functional Dimensions - Edition 1.0 2000 IEC 0 9303 61340-2-3 Electrostatics - Part 2-3: Methods of Test for Determining the Resistaance and Resistivity of Solid Planar Materials Used to 2000 IEC 0 Avoid Electrostatic Charge Accumulation - Edition 2.0 9304 61468 Nuclear Power Plants - In-Core Instrumentation - Characteristics and Test Methods of Self-Powered Neutron Detectors - 2000 IEC 0 Edition 1.0; Includes Amendment 1: 6/2003 9305 61338-1-3 Waveguide Type Dielecctric Resonators - Part 1-3: General Information and Test Conditions - Measurement Method of 1999 IEC 0 Complex Relative Permittivity for Dielectric Resonator Materials at Microwave Frequency - Edition 1.0 9306 61502 Nuclear Power Plants - Pressurized Water Reactors - Vibration Monitoring of Internal Structures - Edition 1.0 1999 IEC 0 9307 61540 Electrical Accessories - Portable Residual Current Devices without Integral Overcurrent Protection for Household and 1999 IEC 0 Similar Use (PRCDs) - Edition 1.1 Consolidated Reprint 9308 61554 Panel Mounted Equipment - Electrical Measuring Instruments - Dimensions for Panel Mounting - Edition 1.0 1999 IEC 0 9309 61595-3 Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel System, for Professional Use - Part 3: 24-Bit Operation 1999 IEC 0 for 16-Bit Media - Edition 1.0 9310 61599 Videodisk Players - Methods of Measurement - Edition 1.0 1999 IEC 0 9311 61683 Photovoltaic Systems - Power Conditioners - Procedure for Measuring Efficiency - Edition 1.0 1999 IEC 0 9312 61726 Cable Assemblies, Cables, Connectors and Passive Microwave Components - Screening Attenuation Measurement by the 1999 IEC 0 Reverberation Chamber Method - Edition 3.0 9313 61754-16 Fibre Optic Connector Interfaces - Part 16: Type PN Connector Family - Edition 1.0 1999 IEC 0 9314 61754-12 Fibre Optic Connector Interfaces - Part 12: Type FS Connector Family - Edition 1.0 1999 IEC 0 9315 62056-31 NULL 1999 IEC 0 9316 62105 Digital Audio Broadcast System - Specification of the Receiver Data Interface (RDI) - Edition 1.0 1999 IEC 0 9317 61993-1 Maritime Navigation and Radiocommunication Equipment and Systems - Part 1: Shipborne Automatic Transponder 1999 IEC 0 System Installation Using VHF Digital Selective Calling (DSC) Techniques - Operational and Performance Requirements, Methods of Testing and Required 9318 62005-4 Reliability of Fibre Optic Interconnecting Devices and Passive Optical Components - Part 4: Product Screening - Edition 1999 IEC 0 1.0 9319 62005-4(2 NULL 1999 IEC 0 9320 61943 Integrated Circuits - Manufacturing Line Approval Application Guideline - Edition 1.0 1999 IEC 0 9321 61964 Integrated Circuits - Memory Devices Pin Configurations - Edition 1.0 1999 IEC 0 9322 61966-2-1 Multimedia Systems and Equipment - Colour Measurement and Management - Part 2-1: Colour Management - Default 1999 IEC 0 RGB Colour Space - sRGB - Edition 1.0; Includes Amendment 1: 1/2003 9323 61926-1 Design Automation - Part 1: Standard Test Language for all Systems - Common Abbreviated Test Language for All 1999 IEC 0 Systems (C/ATLAS) - Edition 1.0 9324 61834-3 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 1999 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 3: HD Format for 1125-60 and 1250-50 Systems - Edition 1.0 9325 61811-1 Electromechanical telecom elementary relays of assessed quality Part 1: Generic specification and blank detail 1999 IEC 0 specification - Edition 2.0 9326 62117 Nuclear Reactor Instrumentation - Pressurized Light Water Reactors (PWR) - Monitoring Adequate Cooling within the 1999 IEC 0 Core During Cold Shutdown - Edition 1.0 9327 IECEX TR NULL 1999 IEC 0 61241-1-1 9328 PAS 62111 Specifications For The Use Of Renewable Energies In Rural Decentralised Electification - Edition 1.0 1999 IEC 0 9329 TR 61000-5-3 Electromagnetic Compatibility (EMC) - Part 5-3: Installation and Mitigation Guidelines - HEMP Protection Concepts - 1999 IEC 0 Edition 1.0 9330 TR 60877 Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service - 1999 IEC 0 Edition 2.0 9331 TR 60825-9 NULL 1999 IEC 0 9332 TR 61364 Nomenclature for Hydroelectric Powerplant Machinery - Edition 1.0; Includes Corrigendum: 08/2000 1999 IEC 0 9333 TR 61926-1-1 Design Automation - Part 1-1: Harmonization of ATLAS Test Languages - Edition 1.0 1999 IEC 0 9334 TR 61807 Magnetic Properties of Magnetically Hard Materials at Elevated Temperatures - Methods of Measurement - Edition 1.0 1999 IEC 0 9335 TR 61832 Design and installation of on-line analyser systems - Guide to technical enquiry and bid evaluation - Edition 2.0 1999 IEC 0 9336 TR 61998 Model and framework for standardization in multimedia equipment and systems - Edition 2.0 1999 IEC 0 9337 TR 62051 Electricity Metering - Glossary of Terms - Edition 1.0 1999 IEC 0 9338 TR 62063 High-Voltage Switchgear and Controlgear - The Use of Electronic and Associated Technologies in Auxiliary Equipment of 1999 IEC 0 Switchgear and Controlgear - Edition 1.0 9339 TS 61895 Ultrasonics - Pulsed Doppler Diagnostic Systems - Test Procedures to Determine Performance - Edition 1.0 1999 IEC 0 9340 TS 61956 Methods of Test for the Evaluation of Water Treeing in Insulating Materials - Edition 1.0 1999 IEC 0 9341 TS 60871-2 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V Part 2: Endurance testing - Edition 3.0 1999 IEC 0 9342 60531 Household Electric Thermal Storage Room Heaters - Methods for Measuring Performance - Edition 2.0 1999 IEC 0 9343 60533 Electrical and electronic installations in ships Electromagnetic compatibility (EMC) Ships with a metallic hull - Edition 1999 IEC 0 3.0 9344 60444-1 AMD Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network - Part 1: Basic Method for the 1999 IEC 0 1 Measurement of Resonance Frequency and Resonance Resistance of Quartz Crystal Units by Zero Phase Technique in a Pi- Network - Edition 2.0 9345 60489-6 Radio Equipment Used in Mobile Services - Methods of Measurement - Part 6: Data Equipment - Edition 3.0 1999 IEC 0 9346 60522 Determination of the Permanent Filtration of X-Ray Tube Assemblies - Edition 2.0 1999 IEC 0 9347 60424-3 Ferrite cores Guidelines on the limits of surface irregularities Part 3: ETD-cores, EER-cores, EC-cores and E-cores - 1999 IEC 0 Edition 2.0 9348 60424-1 Ferrite cores Guidelines on the limits of surface irregularities Part 1: General specification - Edition 2.0 1999 IEC 0 9349 60398 Installations for electroheating and electromagnetic processing General performance test methods - Edition 3.0 1999 IEC 0 9350 60319 Presentation and Specification of Reliability Data for Electronic Components - Edition 3.0 1999 IEC 0 9351 60331-21 Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 21: Procedures and Requirements - Cables of Rated 1999 IEC 0 Voltage up to and Including 0,6/1,0 kV - Edition 1.0 9352 60331-23 Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 23: Procedures and Requirements - Electric Data 1999 IEC 0 Cables - Edition 1.0 9353 60331-25 Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 25: Procedures and Requirements - Optical Fibre 1999 IEC 0 Cables - Edition 1.0 9354 60317-52 Specifications for Particular Types of Winding Wires - Part 52: Aromatic Polyamide (Aramid) Tape Wrapped Round 1999 IEC 0 Copper Wire, Temperature Index 220 - Edition 2.0 9355 60317-53 Specifications for particular types of winding wires Part 53: Aromatic polyamide (aramid) tape wrapped rectangular 1999 IEC 0 copper wire, temperature index 220 - Edition 2.0 9356 60050-415 International Electrotechnical Vocabulary - Part 415: Wind Turbine Generator Systems - Edition 1.0 1999 IEC 0 9357 60050-191 International Electrotechnical Vocabulary - Chapter 191: Dependability and Quality of Service - Edition 1.0 1999 IEC 0 AMD 1 9358 60044-7 Instrument Transformers - Part 7: Electronic Voltage Transformers - Edition 1.0 1999 IEC 0 9359 60050-651 International Electrotechnical Vocabulary Part 651: Live working - Edition 2.0 1999 IEC 0 9360 60068-2-74 Environmental Testing - Part 2: Tests - Test Xc: Fluid Contamination - Edition 1.0 1999 IEC 0 9361 60068-2-77 Environmental Testing - Part 2-77: Tests - Test 77: Body Strength and Impact Shock - Edition 1.0 1999 IEC 0 9362 60077-1 Railway Applications - Electric Equipment for Rolling Stock - Part 1: General Service Conditions and General Rules - 1999 IEC 0 Edition 1.0 9363 60077-2 Railway Applications - Electric Equipment for Rolling Stock - Part 2: Electrotechnical Components - General Rules - 1999 IEC 0 Edition 1.0 9364 60068-2-11 Basic environmental testing procedures - Edition 3.0 1999 IEC 0 CORR 1 9365 60092-359 NULL 1999 IEC 0 9366 60092-502 Electrical Installations in Ships - Part 502: Tankers - Special Features - Edition 5.0 1999 IEC 0 9367 60191-2W Twenty-first supplement to Publication 60191-2 (1966) Mechanical standardization of semiconductor devices Part 2: 1999 IEC 0 Dimensions - Edition 1.0 9368 60191-2X Twenty-second supplement to Publication 60191-2 (1966) Mechanical standardization of semiconductor devices Part 2: 1999 IEC 0 Dimensions - Edition 1.0 9369 60191-3 Mechanical Standardization of Semiconductor Devices - Part 3: General Rules for the Preparation of Outline Drawings of 1999 IEC 0 Integrated Circuits - Edition 2.0 9370 60146-2 Semiconductor Converters - Part 2: Self-Commutated Semiconductor Converters Including Direct d.c. Converters - Edition 1999 IEC 0 2.0 9371 60118-1 NULL 1999 IEC 0 9372 60118-6 NULL 1999 IEC 0 9373 60107-3 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions - Part 3: Electrical 1999 IEC 0 Measurements on Multichannel Sound Television Receivers Using Subcarrier Systems - Edition 1.1 Consolidated Reprint 9374 60107-4 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions - Part 4: Electrical 1999 IEC 0 Measurements on Multichannel Sound Television Receivers Using the Two-Carrier FM-System - Edition 1.1 Consolidated Reprint 9375 60107-5 Recommended Methods of Measurements on Receivers for Television Broadcast Transmissions - Part 5: Electrical 1999 IEC 0 Measurements on Multichannel Sound Television Receivers Using the NICAM Two-Channel Digital Sound-System - Edition 1.1 Consolidated Reprint 9376 60244-1 Methods of Measurement for Radio Transmitters - Part 1: General Characteristics for Broadcast Transmitters - Edition 2.0 1999 IEC 0 9377 60244-15 Methods of measurement for radio transmitters Part 15: Amplitude-modulated transmitters for sound broadcasting - Edition 1999 IEC 0 1.0 9378 60193 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Model Acceptance Tests - Edition 2.0 1999 IEC 0 9379 60264-3-2 Packaging of Winding Wires - Part 3-2: Taper Barrelled Delivery Spools - Specification for Returnable Spools Made from 1999 IEC 0 Thermoplastic Materials - Edition 2.0 9380 60264-3-4 Packaging of Winding Wires - Part 3-4: Taper Barrelled Delivery Spools - Basic Dimensions of Containers for Taper 1999 IEC 0 Barrelled Delivery Spools - Edition 2.0 9381 60264-3-5 Packaging of Winding Wires - Part 3-5: Taper Barrelled Delivery Spools - Specification for Spool Containers Made from 1999 IEC 0 Thermoplastic Material - Edition 2.0 9382 60315-3 Methods of Measurement on Radio Receivers for Various Classes of Emission - Part 3: Receivers for Amplitude- 1999 IEC 0 Modulated Sound-Broadcasting Emissions - Edition 2.1 Consolidated Reprint 9383 60287-3-1 Electric cables Calculation of the current rating Part 3-1: Operating conditions Site reference conditions - Edition 2.0 1999 IEC 0 9384 60908 Audio Recording - Compact Disc Digital Audio System - Edition 2.0 1999 IEC 0 9385 60908(2 NULL 1999 IEC 0 9386 60938-2-1 Fixed Inductors for Electromagnetic Interference Suppression - Part 2-1: Blank Detail Specification - Inductors for Which 1999 IEC 0 Safety Tests are Required - Assessment Level D - Edition 1.0 9387 60938-2-2 Fixed Inductors for Electromagnetic Interference Suppression - Part 2-2: Blank Detail Specification - Inductors for Which 1999 IEC 0 Safety Tests are Required (Only) - Edition 1.0 9388 60874-14-9 Connectors for Optical Fibres and Cables - Part 14-9: Fibre Optic Connector Type SC-APC Tuned 8 Degrees Terminated 1999 IEC 0 on Single Mode Fibre Type B1 - Detail Specification - Edition 1.0 9389 60874-14-10 Connectors for Optical Fibres and Cables - Part 14-10: Fibre Optic Pigtail or Patch Cord Connector Type SC-APC Untuned 1999 IEC 0 8 Degrees Terminated on Single Mode Fibre Type B1 - Detail Specification - Edition 1.0 9390 60874-19-2 Connectors for Optical Fibres and Cables - Part 19-2: Fibre Optic Adaptor (Duplex) Type SC for Single-Mode Fibre 1999 IEC 0 Connectors - Detail Specification - Edition 1.0 9391 61000-2-11 Electromagnetic Compatibility (EMC) - Part 2-11: Environment - Classification of HEMP Environments - Edition 1.0 1999 IEC 0 9392 60990 Methods of measurement of touch current and protective conductor current - Edition 3.0 1999 IEC 0 9393 60966-1 Radio Frequency and Coaxial Cable Assemblies - Part 1: General Specification - General Requirements and Test Methods - 1999 IEC 0 Edition 2.0; IECQ QC 140000 9394 60947-5-6 Low-Voltage Switchgear and Controlgear - Part 5-6: Control Circuit Devices and Switching Elements - DC Interface for 1999 IEC 0 Proximity Sensors and Switching Amplifiers (NAMUR) - Edition 1.0 9395 60834-1 Teleprotection Equipment of Power Systems - Performance and Testing - Part 1: Command Systems - Edition 2.0 1999 IEC 0 9396 60774-2 Helican-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - Part 2: FM Audio 1999 IEC 0 Recording - Edition 1.0 9397 60748-2-11 Semiconductor Devices - Integrated Circuits - Part 2-11: Digital Integrated Circuits - Blank Detail Specification for Single 1999 IEC 0 Supply Integrated Circuit, Electrically Erasable, and Programmable Read-Only Memory - Edition 1.0 9398 60692 Nuclear instrumentation Density gauges utilizing ionizing radiation Definitions and test methods - Edition 2.0 1999 IEC 0 9399 60684-3-136 Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheet 136: Extruded Fluorosilicone 1999 IEC 0 Sleeving - General Purpose - Edition 1.0; Includes Corrigendum: 02/1999 9400 60684-3-409 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 409: Glass Textile Sleeving 1999 IEC 0 with Polyurethane (PUR)-Based Coating - Edition 1.0 9401 60672-2 Ceramic and Glass Insulating Materials - Part 2: Methods of Test - Edition 2.0 1999 IEC 0 9402 60660 Insulators - Tests on Indoor Post Insulators of Organic Material for Systems with Nominal Voltages Greater Than 1 000 V 1999 IEC 0 up to but Not Including 300 kV - Edition 2.0 9403 61249-2-12 Materials for Printed Boards and Other Interconnecting Structures - Part 2-12: Sectional Specification Set for Reinforced 1999 IEC 0 Base Materials, Clad and Unclad - Epoxide Non-Woven Aramid Laminate of Defined Flammability, Copper-Clad - Edition 1.0; Replaces IEC 9404 61249-2-13 Materials for Printed Boards and Other Interconnecting Structures - Part 2-13: Sectional Specification Set for Reinforced 1999 IEC 0 Base Materials, Clad and Unclad - Cyanate Ester Non-Woven Aramid Laminate of Defined Flammability, Copper-Clad - Edition 1.0; Replace 9405 61182-10 Printed Boards - Electronic Data Description and Transfer - Part 10: Electronic Data Hierarchy - Edition 1.0 1999 IEC 0 9406 61169-31 Radio-Frequency Connectors - Part 31: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,0 mm (0,039 in) 1999 IEC 0 with Screw Coupling - Characteristic Impedance 50 Ohms (Type 1,0) - Edition 1.0 9407 61169-32 Radio-Frequency Connectors - Part 32: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,85 mm (0,072 1999 IEC 0 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type 1,85) - Edition 1.0 9408 61316 Industrial Cable Reels - Edition 2.0 1999 IEC 0 9409 61300-2-43 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-43: Tests 1999 IEC 0 Screen testing of return loss of single-mode PC optical fibre connectors - Edition 2.0 9410 61300-2-45 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Mesurement Procedures - Part 2-45: Tests - 1999 IEC 0 Durability Test by Water Immersion - Edition 1.0 9411 61300-3-17 NULL 1999 IEC 0 9412 61281-1 Fibre Optic Communication Subsystems - Part 1: Generic Specification - Edition 1.0 1999 IEC 0 9413 61249-3-3 Materials for Printed Boards and Other Interconnecting Structures - Part 3-3: Sectional Specification Set for Unreinforced 1999 IEC 0 Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive Coated Flexible Polyester Film - Edition 1.0 9414 61249-3-4 Materials for Printed Boards and Other Interconnecting Structures - Part 3-4: Sectional Specification Set for Unreinforced 1999 IEC 0 Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive Coated Flexible Polyimide Film - Edition 1.0 9415 61249-3-5 Materials for Printed Boards and Other Interconnecting Structures - Part 3-5: Sectional Specification Set for Unreinforced 1999 IEC 0 Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Transfer Adhesive Films - Edition 1.0 9416 61280-4-2 Fibre Optic Communication Subsystem Basic Test Procedures - Part 4-2: Installed cable plant Single-mode attenuation and 1999 IEC 0 optical return loss measurement - Edition 2.0 9417 61069-7 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1999 IEC 0 assessment Part 7: Assessment of system safety - Edition 2.0 9418 61069-8 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1999 IEC 0 assessment Part 8: Assessment of other system properties - Edition 2.0 9419 60999-1 Connecting Devices - Electrical Copper Conductors - Safety Requirements for Screw-Type and Screwless-Type Clamping 1999 IEC 0 Units - Part 1: General Requirements and Particular Requirements for Clamping Units for Conductors from 0,2 mm Squared up to 35 mm Squared ( 9420 61076-3-100 Connectors for Use in d.c., Low-Frequency Analogue and Digital High-Speed Data Applications - Part 3-100: Rectangular 1999 IEC 0 Connectors with Assessed Quality - Detail Specification for a Range of Shielded Connectors with Trapezoidal-Shaped Shells and Non-Removab 9421 61076-4-103 Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications - Part 4-103: Printed Board 1999 IEC 0 Connectors with Assessed Quality - Detail Specification for Two-Part Connectors with Shielding and a Basic Grid of 2,5 mm - Edition 1.0 9422 61076-4-104 Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications - Part 4-104: Printed Board 1999 IEC 0 Connectors with Assessed Quality - Detail Specification for Two-Part Connectors, Basic Grid of 2,0 mm, with Terminations on a Multiple G 9423 61114-1 Receiving Antennas for Satellite Broadcast Transmissions in the 11/12 GHz Band - Part 1: Electrical Measurements - 1999 IEC 0 Edition 2.0 9424 C263.1-99 1999 IEC 9425 61146-4 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurements - Part 4: Automatic Functions of Video Cameras and 1998 IEC 0 Camera-Recorders - Edition 1.0 9426 61143-1 Electrical Measuring Instruments - X-t Recorders - Part 1: Definitions and Requirements - Edition 1.1; Consolidated 1998 IEC 0 Reprint 9427 61108-2 Maritime Navigation and Radiocommunication Equipment and Systems - Global Navigation Satellite Systems (GNSS) - 1998 IEC 0 Part 2: Global Navigation Satellite System (GLONASS) - Receiver Equipment - Performance Standards, Methods of Testing and Required Test Results 9428 61097-8 Global Maritime Distress and Safety System (GMDSS) - Part 8: Shipborne Watchkeeping Receivers for the Reception of 1998 IEC 0 Digital Selective Calling (DSC) in the Maritime MF, MF/HF and VHF Bands - Operational and Performance Requirements, Methods of Testing and R 9429 61169-1 Radio frequency connectors Part 1: Generic specification General requirements and measuring methods - Edition 2.0 1998 IEC 0 9430 61163-2 Reliability Stress Screening - Part 2: Electronic Components - Edition 1.0 1998 IEC 0 9431 61162-2 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 2: Single Talker and 1998 IEC 0 Multiple Listeners, High-Speed Transmission - Edition 1.0 9432 61029-2-10 Safety of Transportable Motor-Operated Electric Tools - Part 2-10: Particular Requirements for Cutting-Off Grinders - 1998 IEC 0 Edition 1.0; To be Used in Conjunction with the IEC 61029-1 9433 61069-6 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1998 IEC 0 assessment Part 6: Assessment of system operability - Edition 2.0 9434 61061-3-1 Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - 1998 IEC 0 Sheet 1: Sheets Produced from Beech Veneer - Edition 1.0 9435 61290-6-1 Optical Fibre Amplifiers - Basic Specification - Part 6-1: Test Methods for Pump Leakage Parameters - Optical 1998 IEC 0 Demultiplexer - Edition 1.0 9436 61300-3-21 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-21: 1998 IEC 0 Examinations and measurements Switching time - Edition 2.0 9437 61300-3-23 NULL 1998 IEC 0 9438 61300-3-40 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-40: 1998 IEC 0 Examinations and Measurements - Extinction Ratio of a Polarization Maintaining (pm) Fibre Pigtailed Connector - Edition 1.0 9439 61300-2-41 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-41: Tests 1998 IEC 0 - Screen Testing of Attenuation of Single-Mode Tuned Non-Angled Optical Fibre Connectors - Edition 1.0 9440 61334-4-61 Distribution Automation Using Distribution Line Carrier Systems - Part 4-61: Data Communication Protocols - Network 1998 IEC 0 Layer - Connectionless Protocol - Edition 1.0 9441 61334-4-33 Distribution Automation Using Distribution Line Carrier Systems - Part 4-33: Data Communication Protocols - Data Link 1998 IEC 0 Layer - Connection Oriented Protocol - Edition 1.0 9442 61334-3-1 Distribution Automation Using Distribution Line Carrier Systems - Part 3-1: Mains Signalling Requirements - Frequency 1998 IEC 0 Bands and Output Levels - Edition 1.0 9443 61331-3 Protective devices against diagnostic medical X-radiation Part 3: Protective clothing, eyewear and protective patient 1998 IEC 0 shields - Edition 2.0 9444 61188-1-2 Printed Boards and Printed Board Assemblies - Design and Use - Part 1-2: Generic Requirements - Controlled Impedance - 1998 IEC 0 Edition 1.0 9445 61191-3 Printed board assemblies Part 3: Sectional specification Requirements for through-hole mount soldered assemblies - 1998 IEC 0 Edition 2.0 9446 61191-4 Printed Board Assemblies - Part 4: Sectional Specification - Requirements for Terminal Soldered Assemblies - Edition 1.0 1998 IEC 0 9447 61196-3 Radio-Frequency Cables - Part 3: Sectional Specification for Coaxial Cables for Local Area Networks - Edition 1.0 1998 IEC 0 9448 60679-4-1 Quartz Crystal Controlled Oscillators of Assessed Quality - Part 4-1: Blank Detail Specification - Capability Approval - 1998 IEC 0 Edition 1.0; QC 690101 9449 60679-5 Quartz Crystal Controlled Oscillators of Assessed Quality - Part 5: Sectional Specification - Qualification Approval - 1998 IEC 0 Edition 1.0 9450 60679-5-1 Quartz Crystal Controlled Oscillators of Assessed Quality - Part 5-1: Blank Detail Specification - Qualification Approval - 1998 IEC 0 Edition 1.0; QC 690201 9451 60675 Household Electric Direct-Acting Room Heaters - Methods for Measuring Performance - Edition 2.1 Consolidated Reprint 1998 IEC 0 9452 60684-3-151 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 151: Extruded PVC/Nitrile 1998 IEC 0 Rubber - General Purpose - Edition 1.0 9453 60704-2-11 Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2-11: 1998 IEC 0 Particular Requirements for Electrically-Opearted Food Preparation Appliances - Edition 1.0 9454 60780 NULL 1998 IEC 0 9455 60799 Electrical Accessories - Cord Sets and Interconnection Cord Sets - Edition 2.0 1998 IEC 0 9456 60870-6-701 Telecontrol Equipment and Systems - Part 6-701: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1998 IEC 0 Recommendations - Functional Profile for Providing the TASE.1 Application Service in End Systems - Edition 1.0 9457 60870-6-702 Telecontrol equipment and systems Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T 1998 IEC 0 recommendations Functional profile for providing the TASE.2 application service in end systems - Edition 2.0 9458 60835-2-4 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1998 IEC 0 terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulator - Edition 1.1 Consolidated Reprint 9459 61000-2-10 Electromagnetic Compatibility (EMC) - Part 2-10: Environment - Description of HEMP Environment - Conducted 1998 IEC 0 Disturbance - Edition 1.0 9460 60904-8 Photovoltaic devices Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device - Edition 3.0 1998 IEC 0 9461 60245-2 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 2: Test Methods - Edition 2.2; Consolidated 1998 IEC 0 Reprint 9462 60110-1 Power Capacitors for Induction Heating Installations - Part 1: General - Edition 1.0; Supersedes IEC 60594 1998 IEC 0 9463 60118-14 Hearing Aids - Part 14: Specification of a Digital Interface Device - Edition 1.0 1998 IEC 0 9464 60141-1 AMD Amendment 2 Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories - Part 1: Oil-Filled, Paper-Insulated, 1998 IEC 0 2 Metal Sheathed Cables and Accessories for Alternating Voltages up to and Including 400 kV - Edition 3.0 9465 60143-3 Series capacitors for power systems - Part 3: Internal fuses - Edition 2.0 1998 IEC 0 9466 60130-17 Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for Interconnection Devices Which Prmit Multi- 1998 IEC 0 Directional Mating, for Use with Rechargeble Batteries - Edition 1.0 9467 60191-2V Twentieth supplement to Publication 60191 -2 (1966) Mechanical standardization of semiconductor devices Part 2: 1998 IEC 0 Dimensions - Edition 1.0 9468 60050-713 International Electrotechnical Vocabulary - Part 713: Radiocommunications: Transmitters, Receivers, Networks and 1998 IEC 0 Operation - Edition 1.0 9469 60050-821 International Electrotechnical Vocabulary Part 821: Signalling and Security Apparatus for Railways - Edition 1.0 1998 IEC 0 9470 60050-891 International Electrotechnical Vocabulary Part 891: Electrobiology - Edition 1.0 1998 IEC 0 9471 60050-807 International Electrotechnical Vocabulary - Part 807: Digital Recording of Audio and Video Signals - Edition 1.0 1998 IEC 0 9472 60050-101 International Electrotechnical Vocabulary Part 101: Mathematics - Edition 2.0 1998 IEC 0 9473 60050-121 International Electrotechnical Vocabulary - Part 121: Electromagnetism - Edition 2.0 1998 IEC 0 9474 60050-195 International Electrotechnical Vocabulary - Part 195: Earthing and Protection Against Electric Shock - Edition 1.0 1998 IEC 0 9475 60050-442 International Electrotechnical Vocabulary Part 442: Electrical Accessories - Edition 1.0 1998 IEC 0 9476 60050-551 International Electrotechnical Vocabulary Part 551: Power Electronics - Edition 2.0 1998 IEC 0 9477 60317-27 Specifications for Particular Types of Winding Wires - Part 27: Enamelled Tape Covered Rectangular Copper Wire - 1998 IEC 0 Edition 4.0 9478 60318-3 Electroacoustics Simulators of human head and ear Part 3: Acoustic coupler for the calibration of supra-aural earphones 1998 IEC 0 used in audiometry - Edition 2.0 9479 60320-2-2 NULL 1998 IEC 0 9480 60360 Standard Method of Measurement of Lamp Cap Temperature Rise - Edition 3.0; Includes Corrigendum: 03/1999 1998 IEC 0 9481 60364-7-711 Electrical Installations of Buildings - Part 7-711: Requirements for Special Installations or Locations - Exhibitions, Shows 1998 IEC 0 and Stands - Edition 1.0 9482 60503 Spools for Broadcast Videotape Recorders (VTRS) - Edition 2.0 1998 IEC 0 9483 60433 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic Insulators for a.c. Systems - 1998 IEC 0 Characteristics of Insulator Units of the Long Rod Type - Edition 3.0 9484 60455-1 Resin Based Reactive Compounds Used for Electrical Insulation - Part 1: Definitions and General Requirements - Edition 1998 IEC 0 2.0 9485 60455-2 Resin Based Reactive Compounds Used for Electrical Insulation - Part 2: Methods of Test - Edition 3.0 1998 IEC 0 9486 60454-3-7 Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 7: 1998 IEC 0 Polyimide Film Tapes with Pressure-Sensitive Adhesive - Edition 2.0 9487 60464-1 Varnishes used for electrical insulation Part 1: Definitions and general requirements - Edition 2.1 Consolidated Reprint 1998 IEC 0 9488 60598-2-5 Luminaires Part 2-5: Particular requirements Floodlights - Edition 3.0 1998 IEC 0 9489 60534-3-3 Industrial-Process Control Valves - Part 3-3: Dimensions - End-to-End Dimensions for Buttweld, Two-Way, Globe-Type, 1998 IEC 0 Straight Pattern Control Valves - Edition 1.0 9490 60601-2-40 Medical electrical equipment Part 2-40: Particular requirements for the basic safety and essential performance of 1998 IEC 0 electromyographs and evoked response equipment - Edition 2.0 9491 60603-14 Connectors for Frequencies Below 3 MHz for Use with Printed Boards - Part 14: Detail Specification for Circular 1998 IEC 0 Connectors for Low-Frequency Audio and Video Applications Such as Audio, Video and Audio-Visual Equipment - Edition 1.0 9492 60601-2-7 NULL 1998 IEC 0 9493 TS 61334-5-2 Distribution Automation Using Distribution Line Carrier Systems - Part 5-2: Lower Layer Profiles - Frequency Shift 1998 IEC 0 Keying (FSK) Profile - Edition 1.0 9494 TS 61464 Insulated Bushings - Guide for the Interpretation of Dissolved Gas Analysis (DGA) in Bushings where Oil is the 1998 IEC 0 Impregnating Medium of the Main Insulation (General Paper) - Edition 1.0; Includes Corrigendum 1: 1/2003 9495 TS 60870-6-504 Telecontrol equipment and systems Part 6-504: Telecontrol protocols compatible with ISO standards and ITU-T 1998 IEC 0 recommendations TASE.1 user conventions - Edition 1.0 9496 TS 61000-3-4 Electromagnetic Compatibility (EMC) - Part 3-4: Limits - Limitation of Emission of Harmonic Currents in Low-Voltage 1998 IEC 0 Power Supply Systems for Equipment with Rated Current Greater Than 16 A - Edition 1.0 9497 TS 61902 NULL 1998 IEC 0 9498 TS 62056-41 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 41: Data Exchange Using Wide 1998 IEC 0 Area Networks: Public Switched Telephone Network (PSTN) with LINK+ Protocol - Edition 1.0 9499 TS 62056-51 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 51: Application Layer Protocols - 1998 IEC 0 Edition 1.0 9500 TS 62056-52 Electrical Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 52: Communication Protocols 1998 IEC 0 Management Distribution Line Message Specification (DLMS) Server - Edition 1.0 9501 TS 60479-3 NULL 1998 IEC 0 9502 TR 61930 Fibre Optic Graphical Symbology - Edition 1.0 1998 IEC 0 9503 TR 61931 Fibre Optic - Terminology - Edition 1.0 1998 IEC 0 9504 TR 61852 Medical Electrical Equipment - Digital Imaging and Communications in Medicine (DICOM) - Radiotherapy Objects - 1998 IEC 0 Edition 1.0 9505 TR 61366-1 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 1: General and Annexes - Edition 1998 IEC 0 1.0 9506 TR 61366-2 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 2: Guidelines for Technical 1998 IEC 0 Specifications for Francis Turbines - Edition 1.0 9507 TR 61366-3 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 3: Guidelines for Technical 1998 IEC 0 Specifications for Pelton Turbines - Edition 1.0 9508 TR 61366-4 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 4: Guidelines for Technical 1998 IEC 0 Specifications for Kaplan and Propeller Turbines - Edition 1.0 9509 TR 61366-5 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 5: Guidelines for Technical 1998 IEC 0 Specifications for Tubular Turbines - Edition 1.0 9510 TR 61366-6 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 6: Guidelines for Technical 1998 IEC 0 Specifications for Pump-Turbines - Edition 1.0 9511 TR 61366-7 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 7: Guidelines for Technical 1998 IEC 0 Specifications for Storage Pumps - Edition 1.0 9512 TR 60268-13 Sound System Equipment - Part 13: Listening Tests on Loudspeakers - Edition 2.0 1998 IEC 0 9513 QC 001003 NULL 1998 IEC 0 9514 TR 61000-2-7 Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 7: Low Frequency Magnetic Fields in Various 1998 IEC 0 Environments - Edition 1.0 9515 IECQ 001002-1 NULL 1998 IEC 0 9516 IECQ 001002-2 NULL 1998 IEC 0 9517 IECEX TR NULL 1998 IEC 0 61779-1 9518 IECEX TR NULL 1998 IEC 0 61779-2 9519 IECEX TR NULL 1998 IEC 0 61779-3 9520 IECEX TR NULL 1998 IEC 0 61779-4 9521 IECEX TR NULL 1998 IEC 0 61779-5 9522 61846 Ultrasonics - Pressure Pulse Lithotripters - Characteristics of Fields - Edition 1.0 1998 IEC 0 9523 61847 Ultrasonics - Surgical Systems - Measurement and Declaration of the Basic Output Characteristics - Edition 1.0 1998 IEC 0 9524 61834-2 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 1998 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 2: SD Format for 525-60 and 625-50 Systems - Edition 1.0 9525 61834-4 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 1998 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 4: Pack Header Table and Contents - Edition 1.0 9526 61834-5 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 1998 IEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 5: The Character Information System - Edition 1.0 9527 61835 Helical-Scan Digital Component Video Cassette Recording System Using 12,65 mm (0,5 in) Magnetic Tape - Format D-5 - 1998 IEC 0 Edition 1.0 9528 61800-2 Adjustable speed electrical power drive systems Part 2: General requirements Rating specifications for low voltage 1998 IEC 0 adjustable speed a.c. power drive systems - Edition 2.0 9529 61786 NULL 1998 IEC 0 9530 61868 Mineral Insulating Oils - Determination of Kinematic Viscosity at Very Low Temperatures - Edition 1.0 1998 IEC 0 9531 61874 Nuclear Instrumentation - Geophysical Borehole Instrumentation to Determine Rock Density ("Density Logging") - Edition 1998 IEC 0 1.0 9532 61880 Video Systems (525/60) - Video and Accompanied Data Using the Vertical Blanking Interval - Analogue Interface - 1998 IEC 0 Edition 1.0 9533 61854 Overhead Lines - Requirements and Tests for Spacers - Edition 1.0 1998 IEC 0 9534 61897 Overhead Lines - Requirements and Tests for Stockbridge Type Aeolian Vibration Dampers - Edition 1.0 1998 IEC 0 9535 62053-31 Electricity Metering Equipment (a.c.) - Particular Requirements - Part 31: Pulse Output Devices for Electromechanical and 1998 IEC 0 Electronic Meters (Two Wires Only) - Edition 1.0 9536 62053-61 Electricity Metering Equipment (a.c.) - Particular Requirements - Part 61: Power Consumption and Voltage Requirements - 1998 IEC 0 Edition 1.0 9537 61675-3 NULL 1998 IEC 0 9538 61747-2 Liquid crystal display devices Part 2: Liquid crystal display modules Sectional specification - Edition 2.0 1998 IEC 0 9539 61745 End-Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets - Edition 1.0 1998 IEC 0 9540 61724 NULL 1998 IEC 0 9541 61747-5 NULL 1998 IEC 0 9542 61620 Insulating Liquids - Determination of the Dielectric Dissipation Factor by Measurement of the Conductance and 1998 IEC 0 Capacitance - Test Method - Edition 1.0 9543 61560 Radiation Protection Instrumentation - Apparatus for Non-Destructive Radiation Tests of Fur and Other Cloth Samples - 1998 IEC 0 Edition 1.0 9544 61501 Nuclear Reactor Instrumentation - Wide Range Neutron Fluence Rate Meter - Mean Square Voltage Method - Edition 1.0 1998 IEC 0 9545 61497 Nuclear Power Plants - Electrical Interlocks for Functions Important to Safety - Recommendations for Design and 1998 IEC 0 Implementation - Edition 1.0 9546 61395 Overhead Electrical Conductors - Creep Test Procedures for Stranded Conductors - Edition 1.0 1998 IEC 0 9547 61345 UV Test for Photovoltaic (PV) Modules - Edition 1.0 1998 IEC 0 9548 61363-1 Electrical Installations of Ships and Mobile and Fixed offshore Units - Part 1: Procedures for Calculating Short-Circuit 1998 IEC 0 Currents in Three-Phase a.c. - Edition 1.0 9549 CISPRTR 28 NULL 1997 IEC 0 9550 CISPR-TR 28 NULL 1997 IEC 0 9551 61335 Nuclear Instrumentation - Bore-Hole Apparatus for X-Ray Fluorescence Analysis - Edition 1.0 1997 IEC 0 9552 61466-1 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength 1997 IEC 0 classes and end fittings - Edition 2.0 9553 61512-1 Batch Control - Part 1: Models and Terminology - Edition 1.0 1997 IEC 0 9554 61506 Industrial-Process Measurement and Control - Documentation of Application Software - Edition 1.0 1997 IEC 0 9555 61580-3 Methods of Measurement for Waveguides - Part 3: Variation of Group Delay - Edition 1.0 1997 IEC 0 9556 61580-4 Methods of measurement for waveguides Part 4: Attenuation of waveguide and waveguide assemblies - Edition 1.0; 1997 IEC 0 Includes Corrigendum 1: 7/2006 9557 61566 Measurement of Exposure to Radiofrequency Electromagnetic Fields - Field Strength in the Frequency Range 100 kHz to 1 1997 IEC 0 GHz - Edition 1.0 9558 61621 Dry, Solid Insulating Materials - Resistance Test to High-Voltage, Low-Current Arc Discharges - Edition 1.0 1997 IEC 0 9559 61628-1 Corrugated Pressboard and Presspaper for Electrical Purposes - Part 1: Definitions, Designations and General Requirements 1997 IEC 0 - Edition 1.0 9560 61642 Industrial a.c. Networks Affected by Harmonics - Application of Filters and Shunt Capacitors - Edition 1.0 1997 IEC 0 9561 61619 Insulating Liquids - Contamination by Polychlorinated Biphenyls (PCBs) - Method of Determination by Capillary Column 1997 IEC 0 Gas Chromatography - Edition 1.0; Replaces IEC 60997 9562 61603-1 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation - Part 1: General - Edition 1.0; 1997 IEC 0 Includes Corrigendum: 1997 9563 61603-3 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation - Part 3: Transmission Systems for 1997 IEC 0 Audio Signals for Conference and Similar Systems - Edition 1.0 9564 61578 Radiation Protection Instrumentation Calibration and Verification of the Effectiveness of Radon Compensation for Alpha 1997 IEC 0 and/or Beta Aerosol Measuring Instruments Test Methods - Edition 1.0 9565 61595-1 Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel System, for Professional Use - Part 1: Format A - 1997 IEC 0 Edition 1.0 9566 61595-2 Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel System, for Professional Use - Part 2: Format B - 1997 IEC 0 Edition 1.0 9567 61650 Reliability Data Analysis Techniques - Procedures for Comparison of Two Contant Failure Rates and Two Constant Failure 1997 IEC 0 (Event) Intensities - Edition 1.0 9568 61650(2 NULL 1997 IEC 0 9569 61650(3 NULL 1997 IEC 0 9570 61660-1 Short-Circuit Currents in d.c. Auxiliary Installations in Power Plants and Substations - Part 1: Calculation of Short-Circuit 1997 IEC 0 Currents - Edition 1.0; Includes Corrigendum: 03/1999 and Corrigendum: 03/2000 9571 61660-2 Short-Circuit Currents in d.c. Auxiliary Installations in Power Plants and Substations - Part 2: Calculation of Effects - 1997 IEC 0 Edition 1.0 9572 61725 Analytical Expression for Daily Solar Profiles - Edition 1.0 1997 IEC 0 9573 61866 Audiovisual Systems - Interactive Text Transmission System (ITTS) - Edition 1.0 1997 IEC 0 9574 61800-1 Adjustable Speed Electrical Power Drive Systems - Part 1: General Requirements - Rating Specifications for Low Voltage 1997 IEC 0 Adjustable Speed d.c. Power Drive Systems - Edition 1.0 9575 61843 Measuring Method for the Level of Intermodulation Products Generated in a Gyromagnetic Device - Edition 1.0 1997 IEC 0 9576 TR 61000-5-2 Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines - Section 2: Earthing and Cabling - 1997 IEC 0 Edition 1.0 9577 TR 61119-4 Digital Audio Tape (DAT) Cassette System - Part 4: Character Pack Format - Edition 1.0 1997 IEC 0 9578 TR 60870-1-3 Telecontrol equipment and systems Part 1: General considerations Section 3: Glossary - Edition 2.0 1997 IEC 0 9579 TR 61334-1-2 Distribution Automation Using Distribution Line Carrier Systems - Part 1-2: General Considerations - Guide for 1997 IEC 0 Specification - Edition 1.0 9580 TR 61604 NULL 1997 IEC 0 9581 TR 61859 Guidelines for Radiotherapy Treatment Rooms Design - Edition 1.0 1997 IEC 0 9582 TR 61923 Household Electrical Appliances - Method of Measuring Performance - Assessment of Repeatability and Reproducibility - 1997 IEC 0 Edition 1.0 9583 TS 61774 Overhead lines - Meteorological Data for Assessing Climatic Loads - Edition 1.0 1997 IEC 0 9584 TS 61586 Estimation of the reliability of electrical connectors - Edition 2.0 1997 IEC 0 9585 TS 61430 Secondary Cells and Batteries - Test Methods for Checking the Performance of Devices Designed for Reducing Explosion 1997 IEC 0 Hazards - Lead-Acid Starter Batteries - Edition 1.0 9586 60609-2 Cavitation Pitting Evaluation in Hydraulic Turbines, Storage Pumps and Pump-Turbines - Part 2: Evaluation in Pelton 1997 IEC 0 Turbines - Edition 1.0 9587 60601-2-36 Medical electrical equipment Part 2-36: Particular requirements for the basic safety and essential performance of 1997 IEC 0 equipment for extracorporeally induced lithotripsy - Edition 2.0 9588 60534-6-1 Industrial-Process Control Valves - Part 6: Mounting Details for Attachment of Positioners to Control Valves - Section 1: 1997 IEC 0 Positioner Mounting on Linear Actuators - Edition 1.0; Supersedes IEC 60534-6:1985 9589 60534-2-3 Industrial-process control valves Part 2-3: Flow capacity Test procedures - Edition 3.0 1997 IEC 0 9590 60598-2-4 Luminaires Part 2-4: Particular requirements Portable general purpose luminaires - Edition 3.0 1997 IEC 0 9591 60598-2-24 Luminaires Part 2-24: Particular requirements Luminaires with limited surface temperatures - Edition 2.0 1997 IEC 0 9592 60512-1-3 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 1: 1997 IEC 0 General Examination - Section 3: Test 1c - Electrical Engagement Length - Edition 1.0 9593 60512-1-3(2 NULL 1997 IEC 0 9594 60512-1-3(3 NULL 1997 IEC 0 9595 60512-14-7 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 14: 1997 IEC 0 Sealing Tests - Section 7: Test 14g: Impacting Water - Edition 1.0 9596 60512-1-4 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 1: 1997 IEC 0 General - Section 4: Test 1d - Contact Protection Effectiveness (Scoop-Proof) - Edition 1.0; Includes Corrigendum: 11/2000 9597 60512-19-3 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 19: 1997 IEC 0 Chemical Resistance Test - Section 3: Test 19c - Fluid Resistance - Edition 1.0 9598 60512-6-5 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 6: 1997 IEC 0 Dynamic Stress Tests - Section 5: Test 6e: Random Vibration - Edition 1.0 9599 60437 Radio Interference Test on High-Voltage Insulators - Edition 2.0 1997 IEC 0 9600 60477-2 Laboratory Resistors Part 2: Laboratory a.c. Resistors - Edition 1.0; Includes Amendment 1: 1997 1997 IEC 0 9601 60477-2 AMD NULL 1997 IEC 0 1 9602 60352-1 Solderless Connections - Part 1: Wrapped Connections - General Requirements, Test Methods and Practical Guidance - 1997 IEC 0 Edition 3.0; Includes Corrigendum: 10/1998 9603 60352-6 Solderless Connections - Part 6: Insulation Piercing Connections - General Requirements, Test Methods and Practical 1997 IEC 0 Guidance - Edition 1.0 9604 60424-2 Ferrite cores Guidelines on the limits of surface irregularities Part 2: RM-cores - Edition 2.0 1997 IEC 0 9605 60317-46 Specifications for Particular Types of Winding Wire - Part 46: Aromatic Polyimide Enamelled Round Copper Wire, Class 1997 IEC 0 240 - Edition 2.0 9606 60317-47 Specifications for Particular Types of Winding Wires - Part 47: Aromatic Polyimide Enamelled Rectangular Copper Wire, 1997 IEC 0 Class 240 - Edition 2.0 9607 60317-29 AMD Amendement 1 Specifications for Particular Types of Winding Wires Part 29: Polyester or Polyesterimide Overcoated with 1997 IEC 0 1 Polyamide-Imide Enamelled Rectangular Copper Wire, Class 200 - Edition 1.0 9608 60317-31 Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or 1997 IEC 0 enamelled rectangular copper wire, temperature index 180 - Edition 2.0 9609 60317-32 Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or 1997 IEC 0 enamelled rectangular copper wire, temperature index 155 - Edition 2.0 9610 60317-33 Specifications for particular types of winding wires Part 33: Glass fibre wound, resin or varnish impregnated, bare or 1997 IEC 0 enamelled rectangular copper wire, temperature index 200 - Edition 2.0 9611 60317-28 AMD NULL 1997 IEC 0 1 9612 60317-26 AMD Amendment 1 Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper 1997 IEC 0 1 Wire, Class 200 - Edition 2.0 9613 60092-302 Electrical Installations in Ships - Part 302: Low-Voltage Switchgear and Controlgear Assemblies - Edition 4.0 1997 IEC 0 9614 60092-303 Amendment 1 Electrical installations in ships Part 303: Equipment Transformers for power and lighting - Edition 3.0 1997 IEC 0 AMD 1 9615 60076-8 Power Transformers - Application Guide - Edition 1.0; Replaces IEC 60606: 1978 1997 IEC 0 9616 60068-2-75 Environmental testing Part 2-75: Tests Test Eh: Hammer tests - Edition 2.0 1997 IEC 0 9617 60027-1 AMD Letter symbols to be used in electrical technology Part 1: General Amendment 1 - Edition 6.0 1997 IEC 0 1 9618 60050-723 International Electrotechnical Vocabulary - Chapter 723: Broadcasting: Sound, Television, Data - Edition 1.0; Includes 1997 IEC 0 Amendment 1: 05/1999 9619 60051-1 Direct acting indicating analogue electrical measuring instruments and their accessories Part 1: Definitions and general 1997 IEC 0 requirements common to all parts - Edition 6.0 9620 60191-2U Nineteenth supplement to Publication 60191-2 (1966) Mechanical standardization of semiconductor devices Part 2: 1997 IEC 0 Dimensions - Edition 1.0 9621 60191-5 Mechanical Standardization of Semiconductor Devices - Part 5: Recommendations Applying to Integrated Circuit Packages 1997 IEC 0 Using Tape Automated Bonding (TAB) - Edition 2.0 9622 60172 AMD 1 NULL 1997 IEC 0 9623 60107-7 Methods of Measurement on Receivers for Television - Part 7: HDTV Displays - Edition 1.0 1997 IEC 0 9624 60107-1 Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - 1997 IEC 0 Measurements at radio and video frequencies - Edition 3.0 9625 60107-2 Methods of Measurement on Receivers for Television Broadcast Transmissions - Part 2: Audio Channels - General 1997 IEC 0 Methods and Methods for Monophonic Channels - Edition 2.0; BS EN 60107-2: 1997 9626 60315-4 Methods of Measurement on Radio Receivers for Various Classes of Emission - Part 4: Receivers for Frequency- 1997 IEC 0 Modulated Sound Broadcasting Emissions - Edition 2.0 9627 60286-1 Packaging of Components for Automatic Handling - Part 1: Tape Packaging of Components with Axial Leads on 1997 IEC 0 Continuous Tapes - Edition 2.0 9628 60286-4 Packaging of components for automatic handling Part 4: Stick magazines for electronic components encapsulated in 1997 IEC 0 packages of different forms - Edition 3.0 9629 60245-3 AMD Amendment 1 Rubber insulated cables Rated voltages up to and including 450/750 V Part 3: Heat resistant silicone 1997 IEC 0 1 insulated cables - Edition 2.0 9630 60244-14 Methods of Measurement for Radio Transmitters - Part 14: External Intermodulation Products Caused by Two or More 1997 IEC 0 Transmitters Using the Same or Adjacent Antennas - Edition 1.0 9631 60245-7 AMD Amendment 1 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 7: Heat Resistant Ethylene- 1997 IEC 0 1 Vinyl Acetate Rubber Insulated Cables - Edition 1.0 9632 60245-6 AMD Amendment 1 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 6: Arc Welding Electrode 1997 IEC 0 1 Cables - Edition 2.0 9633 60227-3 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 3: Non-Sheathed Cables for 1997 IEC 0 Fixed Wiring - Edition 2.1 Consolidated Reprint 9634 60227-4 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 4: Sheathed Cables for Fixed 1997 IEC 0 Wiring - Edition 2.1; Consolidated Reprint 9635 60874-14-1 Connectors for Optical Fibres and Cables - Part 14-1: Detail Specification for Fibre Optic Connector Type SC-PC Standard 1997 IEC 0 Terminated to Multimode Fibre Type A1a, A1b - Edition 1.0; QC 910004XX0001 9636 60874-14-2 Connectors for Optical Fibres and Cables - Part 14-2: Detail Specification for Fibre Optic Connector Type SC-PC Standard 1997 IEC 0 Terminated to Single-Mode Fibre Type B1 - Edition 1.0; QC 910004XX0002 9637 60874-14-3 Connectors for Optical Fibres and Cables - Part 14-3: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for 1997 IEC 0 Single-Mode Fibre - Edition 1.0; QC 910004XX0003 9638 60874-14-4 Connectors for Optical Fibres and Cables - Part 14-4: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for 1997 IEC 0 Multimode Fibre - Edition 1.0; QC 910004XX0004 9639 60874-14-5 Connectors for Optical Fibres and Cables - Part 14-5: Detail Specification for Fibre Optic Connector Type SC-PC Untuned 1997 IEC 0 Terminated to Single-Mode Fibre Type B1 - Edition 1.0; QC 910004XX0005 9640 60874-14-7 Connectors for Optical Fibres and Cables - Part 14-7: Detail Specification for Fibre Optic Connector Type SC-APC 9 1997 IEC 0 Degrees Tuned Terminated to Single-Mode Fibre Type B1 - Edition 1.0; QC 910004XX0007 9641 60884-2-6 Plugs and Socket-Outlets for Household and Similar Purposes - Part 2-6: Particular Requirements for Switched Socket- 1997 IEC 0 Outlets with Interlock for Fixed Installations - Edition 1.0 9642 60994 CORR 1 Guide for Field Measurement of Vibrations and Pulsations in Hydraulic Machines (Turbines, Storage Pumps and Pump- 1997 IEC 0 Turbines) - Edition 1.0 9643 60870-5-103 Telecontrol Equipment and Systems - Part 5-103: Transmission Protocols - Companion Standard for the Informative 1997 IEC 0 Interface of Protection Equipment - Edition 1.0; Includes Access to Additional Content 9644 60864-2 Standardization of Interconnections between Broadcasting Transmitters or Transmitter Systems and Supervisory 1997 IEC 0 Equipment - Part 2: Interface Standards for Systems using Data Bus Type Interconnections - Edition 1.0 9645 60814 Insulating Liquids - Oil-Impregnated Paper and Pressboard - Determination of Water by Automatic Coulometric Karl 1997 IEC 0 Fischer Titration - Edition 2.0 9646 60748-2 Semiconductor Devices - Integrated Circuits - Part 2: Digital Integrated Circuits - Edition 2.0 1997 IEC 0 9647 60748-21 Semiconductor Devices - Integrated Circuits - Part 21: Sectional Specification for Film Integrated Circuits and Hybrid Film 1997 IEC 0 Intergrated Circuits on the Basis of Qualification Approval Procedures - Edition 2.0; IECQ QC 760100 9648 60748-21-1 Semiconductor Devices - Integrated Circuits - Part 21-1: Blank Detail Specification for Film Integrated Circuits and Hybrid 1997 IEC 0 Film Integrated Circuits on the Basis of Qualification Approval Procedures - Edition 2.0; IECQ QC 760101 9649 60748-22 Semiconductor Devices - Integrated Circuits - Part 22: Sectional Specification for Film Integrated Circuits and Hybrid Film 1997 IEC 0 Integrated Circuits on the Basis of the Capability Approval Procedures - Edition 2.0; IECQ QC 760200 9650 60748-22-1 Semiconductor Devices - Integrated Circuits - Part 22-1: Blank Detail Specification for Film Integrated Circuits and Hybrid 1997 IEC 0 Film Integrated Circuits on the Basis of the Capability Approval Procedures - Edition 2.0 9651 60748-4 Semiconductor Devices - Integrated Circuits - Part 4: Interface Integrated Circuits - Edition 2.0; IECQ QC 790300 1997 IEC 0 9652 60748-5 Semiconductor Devices - Integrated Circuits - Part 5: Semicustom Integrated Circuits - Edition 1.0 1997 IEC 0 9653 60721-3-5 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their 1997 IEC 0 Severities - Section 5: Ground Vehicle Installations - Edition 2.0 9654 60721-3-1 Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their 1997 IEC 0 Severities - Section 1: Storage - Edition 2.0 9655 60721-3-2 Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their 1997 IEC 0 Severities - Section 2: Transportation - Edition 2.0 9656 60704-2-7 Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2: 1997 IEC 0 Particular Requirements for Fans - Edition 1.0 9657 60704-2-8 Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2: 1997 IEC 0 Particular Requirements for Electric Shavers - Edition 1.0 9658 60672-3 Ceramic and Glass-Insulating Materials Part 3: Specifications for Individual Materials - Edition 2.0 1997 IEC 0 9659 60679-4 Quartz Crystal Controlled Oscillators of Assessed Quality - Part 4: Sectional Specification - Capability Approval - Edition 1997 IEC 0 1.0; QC 690100 9660 61248-7 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 7: Sectional Specification for 1997 IEC 0 High-Frequency Inductors and Intermediate Frequency Transformers on the Basis of the Capability Approval Procedure - Edition 1.0; QC 260 9661 61237-4 Broadcast Video Tape Recorders - Methods of Measurement - Part 4: Analogue Audio Performance Measurements - 1997 IEC 0 Edition 1.0 9662 61234-2 Electrical Insulating Materials - Methods of Test for the Hydrolytic Stability - Part 2: Moulded Thermosets - Edition 1.0 1997 IEC 0 9663 61196-3-2 Radio Frequency Cables - Part 3-2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring - Detail 1997 IEC 0 Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185 m Reach and Up to 10 Mb/s - Edition 1.0 9664 61196-3-3 Radio Frequency Cables - Part 3-3: Coaxial Cables for Digital Communiaction in Horizontal Floor Wiring - Detail 1997 IEC 0 Specification for Coaxial Cables with Foamed Dielectric for Local Area Networks of 185 m Reach and Up to 10 Mb/s - Edition 1.0 9665 61188-1-1 Printed Boards and Printed Board Assemblies - Design and Use - Part 1-1: Generic Requirements - Flatness Considerations 1997 IEC 0 for Electronic Assemblies - Edition 1.0 9666 61300-3-9 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-9: 1997 IEC 0 Examinations and Measurements - Far-End Crosstalk - Edition 1.0 9667 61305-2 Household High-Fidelity Audio Equipment and Systems - Methods of Measuring and Specifying the Performance - Part 2: 1997 IEC 0 FM Radio Tuners - Edition 1.0 9668 61319-2 Interconnections of Satellite Receiving Equipment - Part 2: Japan - Edition 1.0 1997 IEC 0 9669 61300-3-19 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-19: 1997 IEC 0 Examinations and Measurements - Polarization Dependence of Return Loss of a Single-Mode Fibre Optic Component - Edition 1.0 9670 61300-3-25 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: 1997 IEC 0 Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed - Edition 3.0 9671 61300-3-27 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-27: 1997 IEC 0 Examinations and Measurements - Measurement Method for the Hole Location of a Multiway Connector Plug - Edition 1.0 9672 61284 Overhead Lines - Requirements and Tests for Fittings - Edition 2.0; Includes Corrigendum: 1998 1997 IEC 0 9673 61243-5 Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) - Edition 1.0 1997 IEC 0 9674 61249-8-8 Materials for Interconnection Structures - Part 8: Sectional Specification Set for Non-Conductive Films and Coatings - 1997 IEC 0 Section 8: Temporary Polymer Coatings - Edition 1.0 9675 61000-3-8 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 8: Signalling on Low-Voltage Electrical Installations - 1997 IEC 0 Emission Levels, Frequency Bands and Electromagnetic Disturbance Levels - Edition 1.0 9676 61000-4-24 Electromagnetic compatibility (EMC) Part 4-24: Testing and measurement techniques Test methods for protective devices 1997 IEC 0 for HEMP conducted disturbance - Edition 2.0 9677 61069-4 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1997 IEC 0 assessment Part 4: Assessment of system performance - Edition 2.0 9678 61076-3-101 Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High-Speed Data Applications 1997 IEC 0 - Part 3: Rectangular Connectors - Section 101: Detail Specification for a Range of Shielded Connectors with Trapezoidal Shaped Shells an 9679 61032 Protection of Persons and Equipment by Enclosures - Probes for Verification - Edition 2.0; Includes Corrigendum 1: 1997 IEC 0 01/2003 9680 61041-4 Non-Broadcast Video Tape Recorders - Methods of Measurement - Part 4: Calibration Tape (NTSC/PAL/SECAM) - 1997 IEC 0 Edition 1.0 9681 61041-5 Non-Broadcast Video Tape Recorders - Methods of Measurement - Part 5: High-Band Video Tape Recorders, Including 1997 IEC 0 Those Equipped with Y/C Video Connectors (NTSC/PAL) - Edition 1.0 9682 61097-9 Global Maritime Distress and Safety System (GMDSS) - Part 9: Shipborne Transmitters and Receivers for Use in MF and 1997 IEC 0 HF Bands Suitable for Telephony, Digital Selective Calling (DSC) and Narrow Band Direct Printing (NBDP) - Operational and Performance Requi 9683 61076-4-102 Connectors with Assessed Quality for Use in d.c., Low-Frequency Analogue and in Digital High Speed Data Applications - 1997 IEC 0 Part 4: Printed Board Connectors - Section 102: Detail Specification for Two-Part Single-Pole Connectors, for Multiple Uses on Plug-In U 9684 61146-2 Video cameras (PAL/SECAM/NTSC) Methods of measurement Part 2: Two- and three-sensor professional cameras - 1997 IEC 0 Edition 1.0 9685 61146-3 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurements - Part 3: Non-Broadcast Camera-Recorders - Edition 1997 IEC 0 1.0 9686 61114-2 Methods of Measurement on Receiving Antennas for Satellite Broadcast Transmission in the 11/12 GHz Band - Part 2: 1996 IEC 0 Mechanical and Environmental Tests on Individual and Collective Receiving Antennas - Edition 1.0 9687 61076-4-001 Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High-Speed Data 1996 IEC 0 Applications - Part 4: Printed Board Connectors - Section 001: Blank Detail Specification - Edition 1.0 9688 61084-2-4 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service 1996 IEC 0 poles and service posts - Edition 2.0 9689 61097-12 Global Maritime Distress and Safety System (GMDSS) - Part 12: Survival Craft Portable Two-Way VHF Radiotelephone 1996 IEC 0 Apparatus - Operational and Performance Requirements, Methods of Testing and Required Test Results - Edition 1.0 9690 61084-2-1 Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Particular requirements Cable 1996 IEC 0 trunking systems and cable ducting systems intended for mounting on walls and ceilings - Edition 2.0 9691 61097-7 Global maritime distress and safety system (GMDSS) Part 7: Shipborne VHF radiotelephone transmitter and receiver 1996 IEC 0 Operational and performance requirements, methods of testing and required test results - Edition 1.0 9692 61169-1-1 Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail Specification - Edition 1.0 1996 IEC 0 9693 61069-3 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1996 IEC 0 assessment Part 3: Assessment of system functionality - Edition 2.0 9694 61000-5-5 Electromagnetic Compatibility (EMC) Part 5: Installation and Mitigation Guidelines Section 5: Specification of Protective 1996 IEC 0 Devices for HEMP Conducted Disturbance - Basic EMC Publication First Edition - Edition 1.0 9695 61000-2-9 Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP Environment - Radiated 1996 IEC 0 Disturbance Basic EMC Publication First Edition - Edition 1.0 9696 61249-5-4 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without 1996 IEC 0 coatings - Section 4: Conductive inks - Edition 1.0 9697 61249-8-7 Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 1996 IEC 0 7: Marking legend inks - Edition 1.0 9698 61270-1 Capacitors for microwave ovens - Part 1: General - Edition 1.0 1996 IEC 0 9699 61256 Radiation protection instrumentation Installed monitors for the detection of radioactive contamination of laundry - Edition 1996 IEC 0 1.0 9700 61333 Marking on U and E Ferrite Cores - Edition 1.0 1996 IEC 0 9701 61334-3-21 Distribution Automation Using Distribution Line Carrier Systems - Part 3: Mains Signalling Requirements - Section 21: 1996 IEC 0 MV Phase-to-Phase Isolated Capacitive Coupling Device - Edition 1.0 9702 61334-4-1 Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 1: 1996 IEC 0 Reference Model of the Communication System - Edition 1.0 9703 61334-4-32 Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 32: 1996 IEC 0 Data Link Layer - Logical Link Control (LLC) - Edition 1.0 9704 61334-4-41 Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 41: 1996 IEC 0 Application Protocols - Distribution Line Message Specification - Edition 1.0 9705 61334-4-42 Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 42: 1996 IEC 0 Application Protocols - Application Layer - Edition 1.0 9706 61336 Nuclear instrumentation Thickness measurement systems utilizing ionizing radiation Definitions and test methods - Edition 1996 IEC 0 1.0 9707 61169-33 Radio-Frequency Connectors Part 33: Sectional Specification for Series BMA R.F. Connectors - Edition 1.0 1996 IEC 0 9708 61169-36 Radio-Frequency Connectors Part 36: Microminiature R.R. Coaxial Connectors with Snap-On Coupling - Characteristic 1996 IEC 0 Impedance 50 (Type MCX) - Edition 1.0 9709 61248-1 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification - Edition 1996 IEC 0 1.0 9710 61248-2 Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for 1996 IEC 0 signal transformers on the basis of the capability approval procedure - Edition 1.0 9711 61248-3 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 3: Sectional Specification for 1996 IEC 0 Power Transformers on the Basis of the Capability Approval Procedure First Edition; (IECQ QC 260200) - Edition 1.0 9712 61248-4 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 4: Sectional Specification for 1996 IEC 0 Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval Procedure - Edition 1.0 9713 61248-5 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 5: Sectional Specification for 1996 IEC 0 Pulse Transformers on the Basis of the Capability Approval Procedure - Edition 1.0 9714 61248-6 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 6: Sectional Specification for 1996 IEC 0 Inductors on the Basis of the Capability Approval Procedure - Edition 1.0 9715 60835-3-13 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on 1996 IEC 0 satellite earth stations - Section 13: VSAT systems - Edition 1.0 9716 60835-3-14 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1996 IEC 0 satellite earth stations - Section 14: Earth stations for satellite news gathering (SNG) - Edition 1.0 9717 60835-3-6 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1996 IEC 0 satellite earth stations - Section 6: High power amplifiers - Edition 1.0 9718 60835-2-11 Methods of measurement for digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay 1996 IEC 0 systems - Section 11: Cross-polarization interference canceller - Edition 1.0 9719 60870-2-2 Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, 1996 IEC 0 mechanical and other non electrical influences) - Edition 1.0 9720 60870-5-102 Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the 1996 IEC 0 transmission of integrated totals in electric power systems - Edition 1.0 9721 60852-4 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: 1996 IEC 0 Transformers and inductors using YUI-2 laminations - Edition 1.0 9722 60851-1 Winding wires - Test methods - Part 1: General - Edition 2.0 1996 IEC 0 9723 60871-4 Shunt capacitors for AC power systems having a rated voltage above 1 000 V Part 4: Internal fuses - Edition 2.0 1996 IEC 0 9724 60931-3 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 1996 IEC 0 3: Internal fuses - Edition 1.0 9725 60931-1 Shunt Power Capacitors of the Non-Self-Healing Type for A.C. Systems Having a Rated Voltage up to and Including 1 000 1996 IEC 0 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation - Edition 2.0 9726 60935 Nuclear Instrumentation - Modular High Speed Data Acquisition System - FASTBUS - Edition 2.0 1996 IEC 0 9727 60912 Nuclear Instrumentation - ECL (Emitter Coulpled Logic) Front Panel Interconnections in Counter Logic - Edition 2.0 1996 IEC 0 9728 60118-12 Hearing Aids - Part 12: Dimensions of Electrical Connector Systems - Edition 1.0 1996 IEC 0 9729 60169-1 AMD Amendment 1 Radio-frequency connectors - Part 1 : General requirements and measuring methods - Edition 2.0 1996 IEC 0 1 9730 60169-15 AMD Amendment 1 Radio-Frequency Connectors Part 15: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 1996 IEC 0 1 4.13 mm (0.163 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SMA) - Edition 1.0 9731 60191-2T Eighteenth supplement to Publication 191-2 (1966) Mechanical standardization of semiconductor devices Part 2: 1996 IEC 0 Dimensions - Edition 1.0 9732 60050-715 International Electrotechnical Vocabulary Chapter 715: Telecommunication Networks, Teletraffic and Operation - Edition 1996 IEC 0 1.0 9733 60050-411 International Electrotechnical Vocabulary Chapter 411: Rotating Machines - Edition 2.0 1996 IEC 0 9734 60050-111 NULL 1996 IEC 0 9735 60071-2 Insulation co-ordination - Part 2: Application guide - Edition 3.0 1996 IEC 0 9736 60068-2-52 Environmental Testing - Part 2: Tests - Test Kb: Salt Mist, Cyclic (Sodium Chloride Solution) - Edition 2.0; Includes 1996 IEC 0 Corrigendum 1: 07/1996 9737 60092-202 NULL 1996 IEC 0 AMD 1 9738 60368-2-2 Piezoelectric Filters - Part 2: Guide to the Use of Piezoelectric Filters - Section 2: Piezoelectric Ceramic Filters - Edition 1996 IEC 0 1.0 cat ions - 1996 IEC 0_آ General purpose rigid coaxial transmission lines and their associated flange connectors Part 2: Detail specif 60339-2 9739 Edition 2.0 9740 60512-16-20 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: 1996 IEC 0 Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) - Edi 9741 60512-12-6 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: 1996 IEC 0 Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering - Edition 1.0 9742 60601-3-1 NULL 1996 IEC 0 9743 TS 61244-2 Determination of long-term radiation ageing in polymers Part 2: Procedures for predicting ageing at low dose rates - 1996 IEC 0 Edition 2.0 9744 TS 60871-3 Shunt capacitors for AC power systems having a rated voltage above 1 000 V Part 3: Protection of shunt capacitors and 1996 IEC 0 shunt capacitor banks - Edition 2.0 9745 TS 61390 Ultrasonics - Real-Time Pulse-Echo Systems - Test Procedures to Determine Performance Specification - Edition 1.0 1996 IEC 0 9746 TS 61438 Possible safety and health hazards in the use of alkaline secondary cells and batteries Guide to equipment manufacturers 1996 IEC 0 and users - Edition 1.0 9747 TS 61639 NULL 1996 IEC 0 9748 TS 60034-16-3 Rotating Electrical Machines - Part 16: Excitation Systems for Synchronous Machines - Section 3: Dynamic Performance - 1996 IEC 0 Edition 1.0 9749 TR 61602 Connectors Used in the Field of Audio, Video and Audiovisual Engineering - Edition 1.0 1996 IEC 0 9750 TR 61510 NULL 1996 IEC 0 9751 TR 61200-704 Electrical Installation Guide - Part 704: Construction and Demolition Site Installations - Edition 1.0 1996 IEC 0 9752 TR 61000-5-1 Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines - Section 1: General Considerations 1996 IEC 0 Basic EMC Publication - Edition 1.0 9753 TR 61000-5-4 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 4: Immunity to HEMP - 1996 IEC 0 specifications for protective devices against HEMP radiated disturbance - Basic EMC publication - Edition 1.0 9754 61797-1 Transformers and Inductors for Use in Telecommunication and Electronic Equipment - Main Dimensions of Coil Formers - 1996 IEC 0 Part 1: Coil Formers for Laminated Cores - Edition 1.0 9755 61938 Multimedia systems Guide to the recommended characteristics of analogue interfaces to achieve interoperability - Edition 1996 IEC 0 2.0 9756 61773 Overhead Lines - Testing of Foundations for Structures - Edition 1.0; Includes Corrigendum: 03/1997 1996 IEC 0 9757 61754-8 Fibre Optic Connector Interfaces - Part 8: CF08 Connector Family - Edition 1.0 1996 IEC 0 9758 61754-9 Fibre Optic Connector Interfaces - Part 9: Type DS Connector Family - Edition 1.0 1996 IEC 0 9759 61754-1 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and 1996 IEC 0 guidance - Edition 2.0 9760 61754-2 Fibre Optic Connector Interfaces - Part 2: Type BFOC/2,5 Connector Family - Edition 1.0 1996 IEC 0 9761 61754-3 Fibre Optic Connector Interfaces - Part 3: Type LSA Connector Family - Edition 1.0 1996 IEC 0 9762 61739 Integrated Circuits - Procedures for Manufacturing Line Approval and Quality Management - Edition 1.0 1996 IEC 0 9763 61609 Microwave Ferrite Components - Guide for the Drafting of Specifications - Edition 1.0 1996 IEC 0 9764 61629-1 Aramid pressboard for electrical purposes Part 1: Definitions, designations and general requirements - Edition 1.0 1996 IEC 0 9765 61629-2 Aramid pressboard for electrical purposes Part 2: Methods of test - Edition 1.0 1996 IEC 0 9766 61580-1 Methods of Measurement for Waveguides - Part 1: Decoupling and Rotation of the Plane of Polarization - Edition 1.0 1996 IEC 0 9767 61580-2 Methods of Measurement for Waveguides - Part 2: Level of Intermodulation Products - Edition 1.0 1996 IEC 0 9768 61580-7 Methods of Measurement for Waveguides - Part 7: Graphical Method for the Determination of Waveguide Performance - 1996 IEC 0 Edition 1.0 9769 61580-8 Methods of Measurement for Waveguides - Part 8: Waveguide Power Holding Capability - Edition 1.0 1996 IEC 0 9770 61580-9 Methods of Measurement for Waveguides - Part 9: Reflection Coefficient at Rectangular Waveguide Interfaces - Edition 1996 IEC 0 1.0 9771 61545 Connecting Devices - Devices for the Connection of Aluminium Conductors in Clamping Units of Any Material and 1996 IEC 0 Copper Conductors in Aluminium Bodied Clamping Units - Edition 1.0 9772 61434 Secondary cells and batteries containing alkaline or other non-acid electrolytes Guide to the designation of current in 1996 IEC 0 alkaline secondary cell and battery standards - Edition 1.0 9773 61435 Nuclear instrumentation High-purity germanium crystals for radiation detectors Measurement methods of basic 1996 IEC 0 characteristics - Edition 2.0 9774 61343 Nuclear Reactor Instrumentation - Boiling Light Water Reactors (BWR) - Measurements in the Reactor Vessel for 1996 IEC 0 Monitoring Adequate Cooling within the Core - Edition 1.0 9775 61344 NULL 1996 IEC 0 9776 GUIDE 110 Home control systems Guidelines relating to safety - Edition 2.0 1996 IEC 0 9777 GUIDE 106 Guide for Specifying Environmental Conditions for Equipment Performance Rating - Edition 2.0 1996 IEC 0 9778 GUIDE 102 NULL 1996 IEC 0 9779 62326-4 Printed Boards - Part 4: Rigid Multilayer Printed Boards with Interlayer Connections - Sectional Specification - Edition 1.0 1996 IEC 0 9780 62326-4-1 Printed Boards - Part 4: Rigid Multilayer Printed Boards with Interlayer Connections - Sectional Specification - Section 1: 1996 IEC 0 Capability Detail Specification - Performance Levels A, B and C - Edition 1.0 9781 61429 Marking of Secondary Cells and Batteries with the International Recycling Symbol ISO 7000-1135 - Edition 1.0 1995 IEC 0 9782 61452 Nuclear Instrumentation - Measurement of Gamma-Ray Emission Rates of Radionuclides - Calibration and Use of 1995 IEC 0 Germanium Spectrometers - Edition 1.0 9783 61515 Mineral Insulated Thermocouple Cables and Thermocouples - Edition 2.0 1995 IEC 0 9784 61543 Residual Current-Operated Protective Devices (RCDs) for Household and Similar Use - Electromagnetic Compatibility - 1995 IEC 0 Edition 1.0; Includes Amendment 1: 08/2004 and Amendment 2: 11/2005 9785 61580 Measurement of Return Loss on Waveguide and Waveguide Assemblies - Edition 1.0; Includes Corrigendum 1: 7/2006 1995 IEC 0 9786 61596 NULL 1995 IEC 0 9787 61610 Prints and Transparencies Produced from Electronic Sources - Assessment of Image Quality - Edition 1.0 1995 IEC 0 9788 61702 NULL 1995 IEC 0 9789 61771 Nuclear Power Plants - Main Control-Room - Verification and Validation of Design - Edition 1.0 1995 IEC 0 9790 61829 Photovoltaic (PV) array On-site measurement of current-voltage characteristics - Edition 2.0 1995 IEC 0 9791 TR 60268-18 Sound System equipment - Part 18: Peak programme level meters - Digital audio peak level meter - Edition 1.0 1995 IEC 0 9792 TR 60870-6-1 Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T 1995 IEC 0 recommendations - Section 1: Application context and organization of standards - Edition 1.0 9793 TR 61000-2-6 Electromagnetic compatibility (EMC) - Part 2: Environment - section 6: Assessment of the emission levels in the power 1995 IEC 0 supply of industrial plants as regards low-frequency conducted disturbances - Edition 1.0 9794 TR 61119-7 Digital Audio Tape Cassette System (DAT) - Part 7: DAT Logo Application Rule - Edition 1.0 1995 IEC 0 9795 TR 61334-1-1 Distribution Automation Using Distribution Line Carrier Systems - Part 1: General Considerations - Section 1: Distribution 1995 IEC 0 Automation System Architecture - Edition 1.0 9796 TR 61334-1-4 Distribution Automation Using Distribution Line Carrier Systems - Part 1: General Considerations - Section 4: 1995 IEC 0 Identification of Data Transmission Parameters Concerning Medium and Low-Voltage Distribution Mains - Edition 1.0 9797 TR 61431 Guide for the Use of Monitor Systems for Lead-Acid Traction Batteries - Edition 1.0 1995 IEC 0 9798 TR 61597 Overhead Electrical Conductors - Calculation Methods for Stranded Bare Conductors - Edition 1.0 1995 IEC 0 9799 TS 61149 Guide for safe handling and operation of mobile radio equipment - Edition 1.0 1995 IEC 0 9800 60603-2 Connectors for Frequencies Below 3 MHz for Use with Printed Boards - Part 2: Detail Specification for Two-Part 1995 IEC 0 Connectors with Assessed Quality, for Printed Boards, for Basic Grid of 2,54 mm (0,1 in) with Common Mounting Features - Edition 3.0; IECQ QC 01 9801 60603-13 Connectors for Frequencies Below 3 MHz for Use with Printed Boards - Part 13: Detail Specification for Two-Part 1995 IEC 0 Connectors of Assessed Quality, for Printed Boards for Basic Grid of 2,54 mm (0,1 in), with Free Connectors for Non- Accessible Insulation Displ 9802 60584-1 Thermocouples Part 1: EMF specifications and tolerances - Edition 3.0 1995 IEC 0 9803 60444-5 Measurement of Quartz Crystal Unit Parameters - Part 5: Methods for the Determination of Equivalent Electrical 1995 IEC 0 Parameters Using Automatic Network Analyzer Techniques and Error Correction - Edition 1.0 9804 60444-6 Measurement of quartz crystal unit parameters Part 6: Measurement of drive level dependence (DLD) - Edition 2.0 1995 IEC 0 9805 60512-11-1 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: 1995 IEC 0 Climatic tests - Section 1: Test 11a - Climatic sequence - Edition 1.0 9806 60512-11-8 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: 1995 IEC 0 Climatic tests - Section 8: Test 11h - Sand and dust - Edition 1.0 9807 60512-15-8 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: 1995 IEC 0 Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application - Edition 1.0 9808 60384-3-101 Fixed Capacitors for Use in Electronic Equipment Part 3-101: Detail Specification: Fixed Tantalum Chip Capacitors for 1995 IEC 0 Surface Mounting with Solid Electrolyte and Porous Anode, Style L, Assessment Level E - Edition 1.0 9809 60404-13 Magnetic Materials - Part 13: Methods of Measurement of Density, Resistivity and Stacking Factor of Electrical Steel 1995 IEC 0 Sheet and Strip - Edition 1.0 9810 60352-3 CORR CORRIGENDUM 1 Solderless connections Part 3: Solderless accessible insulation displacement connections - General 1995 IEC 0 1 requirements, test methods and practical guidance - Edition 1.0 9811 60371-3-9 Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 9: Moulding Micanite - Edition 1995 IEC 0 1.0; Includes Corrigendum 1: 08/1995 9812 60371-3-8 Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 8: Mica Paper Tapes for Flame- 1995 IEC 0 Resistant Security Cables - Edition 1.0; Includes Corrigendum 1: 08/1995 9813 60092-301 Amendment 1 Electrical installations in ships Part 301: Equipment - Generators and motors - Edition 3.0 1995 IEC 0 AMD 2 9814 60068-2-60 Environmental testing Part 2-60: Tests Test Ke: Flowing mixed gas corrosion test - Edition 3.0 1995 IEC 0 9815 60068-2-44 NULL 1995 IEC 0 9816 60068-2-67 Environmental Testing - Part 2: Tests - Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended for 1995 IEC 0 Components - Edition 1.0 9817 60068-2-70 Environmental Testing - Part 2: Tests - Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and 1995 IEC 0 Hands - Edition 1.0 9818 60034-19 Rotating electrical machines Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies - 1995 IEC 0 Edition 2.0 9819 60050-448 International Electrotechnical Vocabulary Chapter 448: Power System Protection - Edition 2.0 1995 IEC 0 9820 60051-9 AMD Amendment 2 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: 1995 IEC 0 2 Recommended Test Methods - Edition 4.0 9821 60050-716-1 International Electrotechnical Vocabulary Chapter 716-1: Integrated Services Digital Network (ISDN) Part 1: General 1995 IEC 0 Aspects - Edition 1.0 9822 60050-705 International Electrotechnical Vocabulary Chapter 705: Radio Wave Propagation - Edition 1.0 1995 IEC 0 9823 60156 Insulating Liquids - Determination of the Breakdown Voltage at Power Frequency - Test Method - Edition 2.0 1995 IEC 0 9824 60115-4-101 Fixed Resistors for Use in Electronic Equipment Part 4: Detail Specification: Fixed Power Wirewound Resistors with 1995 IEC 0 Solderable Axial Wire Leads - Stability Class 5 % - Assessment Level E - Edition 1.0 9825 60115-4-102 NULL 1995 IEC 0 9826 60115-5-101 NULL 1995 IEC 0 9827 60141-1 AMD Amendment 1 Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories - Part 1: Oil-Filled, Paper-Insulated, 1995 IEC 0 1 Metal Sheathed Cables and Accessories for Alternating Voltages up to and Including 400 kV - Edition 3.0 9828 60287-2-2 Electric Cables - Calculation of the Current Rating - Part 2: Thermal Resistance - Section 2: A Method for Calculating 1995 IEC 0 Reduction Factors for Groups of Cables in Free Air, Protected from Solar Radiation - Edition 1.0; Replaces IEC 1042 9829 60305 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic or Glass Insulator Units for A.C. Systems 1995 IEC 0 - Characteristics of Insulator Units of the Cap and Pin Type - Edition 4.0 9830 60931-2 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - 1995 IEC 0 Part 2: Ageing test and destruction test - Edition 2.0 9831 60884-2-5 Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors - Edition 2.0 1995 IEC 0 9832 60870-6-2 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1995 IEC 0 Recommendations - Section 2: Use of Basic Standards (OSI Layers 1- 4) - Edition 1.0 9833 60870-6-501 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1995 IEC 0 Recommendations - Section 501: TASE.1 Service Definitions - Edition 1.0 9834 60870-6-502 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1995 IEC 0 Recommendations - Section 502: TASE.1 Protocol Definitions - Edition 1.0 9835 60870-5-5 Telecontrol Equipment and Systems - Part 5: Transmission Protocols - Section 5: Basic Application Functions - Edition 1.0 1995 IEC 0 9836 60870-2-1 Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic 1995 IEC 0 compatibility - Edition 2.0 9837 60831-2 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 2: 1995 IEC 0 Ageing test, self-healing test and destruction test - Edition 3.0 9838 60835-3-11 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1995 IEC 0 satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission - Edition 1.0 9839 60835-2-9 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1995 IEC 0 terrestrial radio-relay systems - Section 9: Service channels - Edition 1.0 9840 60835-2-6 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1995 IEC 0 terrestrial radio-relay systems - Section 6: Protection switching - Edition 1.0 9841 60835-3-2 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1995 IEC 0 satellite earth stations - Section 2: Antenna - Edition 1.0 9842 60839-10-1 Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars - Edition 1.0 1995 IEC 0 9843 60835-3-7 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1995 IEC 0 satellite earth stations - Section 7: Figure-of-merit of receiving system - Edition 1.0 9844 60674-2 CORR NULL 1995 IEC 0 1 9845 60672-1 Ceramic and glass insulating materials - Part 1: Definitions and classification - Edition 2.0 1995 IEC 0 9846 60721-3-4 Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their 1995 IEC 0 Severities - Section 4: Stationary Use at Non-Weatherprotected Locations - Edition 2.0; Includes Amendment 1: 11/1996 9847 60747-8-3 NULL 1995 IEC 0 9848 61196-3-1 Radio-Frequency Cables - Part 3: Coaxial Cables for Digital Communication in Horizontal Floor Wiring - Section 1: Detail 1995 IEC 0 Specification for Cables of 500 m Reach and up to 10 Mb/s - Edition 1.0 9849 61196-2 NULL 1995 IEC 0 9850 61237-2 Broadcast video tape recorders - Methods of measurement - Part 2: Electrical measurements for analogue composite video 1995 IEC 0 signals - Edition 1.0 9851 61237-3 Methods of Measurement for Broadcast Video Tape Recorders Part 3: Electrical Measurements for Analogue Component 1995 IEC 0 Video Signals - Edition 1.0; Includes Corrigendum: 04/1995 9852 61242 Electrical Accessories - Cable Reels for Household and Similar Purposes - Edition 1.0 1995 IEC 0 9853 61247 PM-Cores Made of Magnetic Oxides and Associated Parts - Dimensions - Edition 1.0 1995 IEC 0 9854 61182-7 Printed Boards - Electronic Data Description and Transfer - Part 7: Bare Board Electric Test Information in Digital Form - 1995 IEC 0 Edition 1.0; Includes Corrigendum 1: 10/2002 9855 61327 Helical-Scan Digital Composite Video Cassette Recording System Using 12,65 mm (0,5 in) Magnetic Tape - Format D-3 - 1995 IEC 0 Edition 1.0 9856 61329 Sound System Equipment - Methods of Measuring and Specifying the Performance of Sounders (Electroacoustic 1995 IEC 0 Transducers for Tone Production) - Edition 1.0 9857 61325 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic or Glass Insulator Units for D.C. Systems 1995 IEC 0 - Definitions, Test Methods and Acceptance Criteria - Edition 1.0 9858 61309 Deep-Fat Fryers for Household Use - Methods for Measuring the Performance - Edition 1.0 1995 IEC 0 9859 61319-1 Interconnections of Satellite Receiving Equipment - Part 1: Europe - Edition 1.0 1995 IEC 0 9860 61305-1 Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 1: 1995 IEC 0 General - Edition 1.0 9861 61305-3 Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 3: 1995 IEC 0 Amplifiers - Edition 1.0 9862 61302 Electrical Insulating Materials - Method to Evaluate the Resistance to Tracking and Erosion - Rotating Wheel Dip Test - 1995 IEC 0 Edition 1.0; Includes Corrigendum 1: 09/1995 9863 61300-2-4 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - 1995 IEC 0 Fibre/cable retention - Edition 1.0 9864 61300-3-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: 1995 IEC 0 Examinations and measurements - Engagement and separation forces - Edition 1.0 9865 61297 Industrial-Process Control Systems - Classification of Adaptive Controllers for the Purpose of Evaluation - Edition 1.0 1995 IEC 0 9866 61300-2-27 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - 1995 IEC 0 Dust - Laminar flow - Edition 1.0 9867 61300-2-28 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-28: Tests 1995 IEC 0 Industrial atmosphere (sulphur dioxide) - Edition 2.0 9868 61300-2-29 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - 1995 IEC 0 Low air pressure - Edition 1.0 9869 61262-7 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the 1995 IEC 0 modulation transfer function - Edition 1.0 9870 61265 Electroacoustics - Instruments for Measurement of Aircraft Noise - Performance Requirements for Systems to Measure 1995 IEC 0 One-Third-Octave Band Sound Pressure Levels in Noise Certification of Transport-Category Aeroplanes - Edition 1.0; Corrigendum-1995 9871 61249-7-1 Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: 1995 IEC 0 Copper/invar/copper - Edition 1.0 9872 61249-5-1 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without 1995 IEC 0 coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) - Edition 1.0 9873 61260 NULL 1995 IEC 0 9874 61067-3-1 Glass and Glass Polyester Fibre Woven Tapes - Part 3: Specifications for Individual Materials - Sheet 1: Type 1, 2 and 3 1995 IEC 0 Tapes - Edition 1.0 9875 61068-3-1 Polyester Fibre Woven Tapes Part 3: Specifications for Individual Materials Sheet 1: Tapes Woven on Conventional or 1995 IEC 0 Shuttleless Looms - Edition 2.0; Includes Corrigendum: 1998 9876 61021-2 Laminated Core Packages for Transformers and Inductors for Use in Telecommunication and Electronic Equipment - Part 1995 IEC 0 2: Electrical Characteristics for Cores Using YEE 2 Laminations - Edition 1.0 9877 61029-2-8 Safety of Transportable Motor-Operated Electric Tools - Part 2-8: Particular Requirements for Single Spindle Vertical 1995 IEC 0 Moulders - Edition 1.0; Includes Amendment 1: 02/1999 and Amendment 2: 05/2001 9878 61029-2-9 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitre saws - Edition 1.0 1995 IEC 0 9879 61094-3 Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard 1995 IEC 0 microphones by the reciprocity technique - Edition 2.0 9880 61094-4 Measurement Microphones Part 4: Specifications for Working Standard Microphones - Edition 1.0 1995 IEC 0 9881 61076-4 Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High-Speed Data 1995 IEC 0 Applications - Part 4: Sectional Specification - Printed Board Connectors - Edition 1.0 9882 61076-4-105 Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High Speed Data Applications 1995 IEC 0 - Part 4: Printed Board Connectors - Section 105: Detail Specification for 9 mm Circular Connector with 3 to 8 Contacts for Use in a Wide 9883 61120-5 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 5: Reels - 1995 IEC 0 Edition 1.0 9884 61146-1 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement - Part 1: Non-Broadcast Single-Sensor Cameras - 1994 IEC 0 Edition 1.0 9885 61097-3 Global Maritime Distress and Safety System (GMDSS) - Part 3: Digital Selective Calling (DSC) Equipment - Operational 1994 IEC 0 and Performance Requirements, Methods of Testing and Required Testing Results - Edition 1.0 9886 61041-2 Non-broadcast video tape recorders - Methods of measurements - Part 2: Video characteristics chrominance SECAM - 1994 IEC 0 Edition 1.0 9887 61017-2 NULL 1994 IEC 0 9888 61069-5 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1994 IEC 0 assessment Part 5: Assessment of system dependability - Edition 2.0 9889 61007 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Measuring Methods and Test 1994 IEC 0 Procedures - Edition 2.0 9890 61255 Household electric heating pads Methods for measuring performance - Edition 2.0 1994 IEC 0 9891 61250 Nuclear Reactors - Instrumentation and Control Systems Important for Safety - Detection of Leakage in Coolant Systems - 1994 IEC 0 Edition 1.0 9892 61261-1 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for 1994 IEC 0 electronic components (IECQ) - Part 1: Generic specification - Qualification approval - Edition 1.0 9893 61261-2 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for 1994 IEC 0 electronic components (IECQ) - Part 2: Sectional specification - Qualification approval - Edition 1.0 9894 61261-2-1 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for 1994 IEC 0 electronic components (IECQ) - Part 2: Sectional specification - Qualification approval - Section 1: Blank detail specification - Asse 9895 61262-1 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the 1994 IEC 0 entrance field size - Edition 1.0 9896 61262-2 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the 1994 IEC 0 conversion factor - Edition 1.0 9897 61262-3 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the 1994 IEC 0 luminance distribution and luminance non-uniformity - Edition 1.0 9898 61262-4 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the 1994 IEC 0 image distortion - Edition 1.0 9899 61262-5 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the 1994 IEC 0 detective quantum efficiency - Edition 1.0 9900 61262-6 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the 1994 IEC 0 contrast ratio and veiling glare index - Edition 1.0 9901 61266 Ultrasonics - Hand-Held Probe Doppler Foetal Heartbeat Detectors - Performance Requirements and Methods of 1994 IEC 0 Measurement and Reporting - Edition 1.0 9902 61293 Marking of Electrical Equipment with Ratings Related to Electrical Supply - Safety Requirements - Edition 1.0 1994 IEC 0 9903 61301 Nuclear Instrumentation - Digital Bus for NIM Instruments - Edition 1.0 1994 IEC 0 9904 61303 Medical Electrical Equipment - Radionuclide Calibrators - Particular Methods for Describing Performance - Edition 1.0 1994 IEC 0 9905 61304 Nuclear Instrumentation - Liquid-Scintillation Counting Systems - Performance Verification - Edition 1.0 1994 IEC 0 9906 61322 Radiation Protection Instrumentation - Installed Dose Equivalent Rate Meters, Warning Assemblies and Monitors for 1994 IEC 0 Neutron Radiation of Energy from Thermal to 15 MeV - Edition 1.0 9907 61331-1 Protective devices against diagnostic medical X-radiation Part 1: Determination of attenuation properties of materials - 1994 IEC 0 Edition 2.0 9908 61331-2 Protective devices against diagnostic medical X-radiation Part 2: Translucent protective plates - Edition 2.0 1994 IEC 0 9909 61182-1 Printed Boards - Electronic Data Description and Transfer - Part 1: Printed Board Description in Digital Form - Edition 1.0 1994 IEC 0 9910 61180-2 NULL 1994 IEC 0 9911 61183 Electroacoustics - Random-Incidence and Diffuse-Field Calibration of Sound Level Meters - Edition 1.0 1994 IEC 0 9912 61241-2-1 NULL 1994 IEC 0 9913 61241-2-3 NULL 1994 IEC 0 9914 61234-1 Method of test for the hydrolitic stability of electrical insulating materials - Part 1: Plastic films - Edition 1.0 1994 IEC 0 9915 61237-1 Broadcast Video Tape Recorders - Methods of Measurement - Part 1: Mechanical Measurements - Edition 1.0 1994 IEC 0 9916 61207-2 Expression of Performance of Gas Analyzers - Part 2: Oxygen in Gas (Utilizing High-Temperature Electrochemical 1994 IEC 0 Sensors) - Edition 1.0; Includes Corrigendum: 05/1994 9917 61207-6 Expression of performance of gas analyzers Part 6: Photometric analyzers - Edition 2.0 1994 IEC 0 9918 60774-1 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS Part 1: VHS and 1994 IEC 0 Compact VHS Video Cassette System - Edition 1.0 9919 60748-2-9 Semiconductor Devices - Integrated Circuits - Part 2: Digital Integrated Circuits - Section 9: Blank Detail Specification for 1994 IEC 0 MOS Ultraviolet Light Erasable Electrically Programmable Read-Only Memories - Edition 1.0 9920 60748-2-10 Semiconductor Devices - Integrated Circuits - Part 2: Digital Integrated Circuits - Section 10: Blank Detail Specification 1994 IEC 0 for Integrated Circuit Dynamic Read/Write Memories - Edition 1.0 9921 60748-20-1 Semiconductor Devices - Integrated Circuits - Part 20: Generic Specification for Film Integrated Circuits and Hybrid Film 1994 IEC 0 Integrated Circuits - Section 1: Requirements for Internal Visual Examination - Edition 1.0 9922 60721-2-8 NULL 1994 IEC 0 9923 60642-2 Piezoelectric ceramic resonator units - Part 2: Guide to the use of piezoelectric ceramic resonator units - Edition 1.0 1994 IEC 0 9924 60838-2-1 Miscellaneous Lampholders - Part 2: Particular Requirements - Section 1: Lampholders S14 - Edition 1.0; Includes 1994 IEC 0 Amendment 1: 1998 and Amendment 2: 10/2004 9925 60835-3-5 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on 1994 IEC 0 satellite earth stations - Section 5: Up- and down-converters - Edition 1.0 9926 60835-2-7 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1994 IEC 0 terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment - Edition 1.0 9927 60835-3-10 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1994 IEC 0 satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth station - Edition 1.0 9928 60835-2-2 Methods of measurement for equipment used in digital microwave transmission systems - Part 2: Measurements on 1994 IEC 0 terrestrial radio-relay systems - Section 2: Antenna - Edition 1.0 9929 60870-6-601 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1994 IEC 0 Recommendations - Section 601: Functional Profile for Providing the Connection-Oriented Transport Service in an End System Connected Via Permanent Ac 9930 60853-1 AMD Amendment 1 Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to 1994 IEC 0 1 and including 18/30(36)kV - Edition 1.0 9931 60852-5 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: 1994 IEC 0 Transformers and inductors using the series Q of C-cores - Edition 1.0 9932 60811-3-1 NULL 1994 IEC 0 AMD 1 9933 60917-2-2 Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional 1994 IEC 0 specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 9934 60906-3 IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 1994 IEC 0 6V, 12 V, 24 V, 48 V, a.c. and d.c. - Edition 1.0 9935 60299 Household electric blankets methods for measuring performance - Edition 3.0 1994 IEC 0 9936 60245-6 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 6: Arc Welding Electrode Cables - Edition 1994 IEC 0 2.0 9937 60245-7 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 7: Heat Resistant Ethylene-Vinyl Acetate 1994 IEC 0 Rubber Insulated Cables - Edition 1.0 9938 60245-3 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables - 1994 IEC 0 Edition 2.0 9939 60245-5 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 5: Lift Cables - Edition 2.0 1994 IEC 0 9940 60127-6 Miniature fuses Part 6: Fuse-holders for miniature fuse-links - Edition 2.0 1994 IEC 0 9941 60115-5-2 NULL 1994 IEC 0 9942 60094-2 Magnetic Tape Recording and Reproducing Systems - Part 2: Calibration Tapes - Edition 2.0; Includes Corrigendum 1: 1994 IEC 0 03/1995 9943 60169-27 Radio-Frequency Connectors - Part 27: Radio-Frequency Coaxial Connectors with Screw Coupling, Typically for Use in 1994 IEC 0 75 Ohms Cable Distribution Systems (Type E) - Edition 1.0 9944 60169-28 Radio-Frequency Connectors - Part 28: Radio-Frequency Coaxial Connectors with Inner Diameter of Outer Conductor of 1994 IEC 0 5,60 mm (0,220 in) with Snap-On Coupling - Characteristic Impedance 75 Ohms - Edition 1.0 9945 60050-801 International Electrotechnical Vocabulary Chapter 801: Acoustics and Electroacoustics - Edition 2.0 1994 IEC 0 9946 60050-725 International Electrotechnical Vocabulary Chapter 725: Space Radiocommunications - Edition 2.0 1994 IEC 0 9947 60051-9 AMD Amendment 1 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: 1994 IEC 0 1 Recommended Test Methods - Edition 4.0 9948 45-3 NULL 1994 IEC 0 9949 544-1 NULL 1994 IEC 0 9950 60068-4 AMD NULL 1994 IEC 0 2 9951 60068-2-66 Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour) - 1994 IEC 0 Edition 1.0 9952 60068-2-68 Environmental Testing - Part 2: Tests - Test L: Dust and Sand - Edition 1.0 1994 IEC 0 9953 60072-3 Dimensions and Output Series for Rotating Electrical Machines - Part 3: Small Built-In Motors - Flange Numbers BF10 to 1994 IEC 0 BF50 - Edition 1.0 9954 60068-2-17 Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing - Edition 4.0 1994 IEC 0 9955 60092-301 Amendment 1 Electrical installations in ships Part 301: Equipment - Generators and motors - Edition 3.0 1994 IEC 0 AMD 1 9956 60092-201 Electrical Installations in Ships - Part 201: System Design - General - Edition 4.0 1994 IEC 0 9957 60092-202 Electrical installations in ships Part 202: System design Protection - Edition 5.0 1994 IEC 0 9958 60092-101 Electrical Installations in Ships - Part 101: Definitions and General Requirements - Edition 4.1 Consolidated Reprint 1994 IEC 0 9959 60352-4 Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test 1994 IEC 0 methods and practical guidance - Edition 1.0 9960 60404-8-9 Magnetic Materials Part 8: Specification for Individual Materials Section 9: Standard Specification for Sintered Soft 1994 IEC 0 Magnetic Materials - Edition 1.0 9961 60393-2-101 Potentiometers for Use in Electronic Equipment - Part 2: Detail Specification: Lead-Screw Actuated Preset Potentiometers 1994 IEC 0 - Stability Class 5% - Assessment Level E - Edition 1.0 9962 60397 NULL 1994 IEC 0 9963 60598-2-25 Luminaires Part 2-25: Particular requirements Luminaires for use in clinical areas of hospitals and health care buildings - 1994 IEC 0 Edition 1.0; Includes Corrigendum 1: 09/1994 9964 60598-2-6 NULL 1994 IEC 0 9965 60544-1 Electrical insulating materials Determination of the effects of ionizing radiation Part 1: Radiation interaction and 1994 IEC 0 dosimetry - Edition 3.0 9966 60605-2 Equipment Reliability Testing - Part 2: Design of Test Cycles - Edition 1.0 1994 IEC 0 9967 60601-2-32 NULL 1994 IEC 0 9968 TS 61200-53 Electrical Installation Guide - Part 53: Selection and Erection of Electrical Equipment - Switchgear and Controlgear - 1994 IEC 0 Edition 1.0; Includes Corrigendum: 10/1995 9969 TS 60865-2 NULL 1994 IEC 0 9970 TR 61295 Calibration Tapes for Broadcast VTRs - Edition 1.0 1994 IEC 0 9971 TR 60870-1-4 Telecontrol Equipment and Systems - Part 1: General Considerations - Section 4: Basic Aspects of Telecontrol Data 1994 IEC 0 Transmission and Organization of Standards IEC 870-5 and IEC 870-6 - Edition 1.0 9972 TR 60513 Fundamental Aspects of Safety Standards for Medical Electrical Equipment - Edition 2.0 1994 IEC 0 9973 92-101 NULL 1994 IEC 0 9974 TR 61223-1 Evaluation and Routine Testing in Medical Imaging Departments - Part 1: General Aspects - Edition 1.0 1993 IEC 0 9975 TR 61288-1 NULL 1993 IEC 0 9976 TR 61288-2 NULL 1993 IEC 0 9977 TR 61294 Insulating Liquids - Determination of the Partial Discharge Inception Voltage (PDIV) - Test Procedure - Edition 1.0 1993 IEC 0 9978 TS 61170 Radiotherapy Simulators - Guidelines for Functional Performance Characteristics - Edition 1.0 1993 IEC 0 9979 TS 61206 Ultrasonics - Continuous-Wave Doppler Systems - Test Procedures - Edition 1.0 1993 IEC 0 9980 TS 61223-2-1 Evaluation and Routine Testing in Medical Imaging Departments - Part 2-1: Constancy Tests - Film Processors - Edition 1993 IEC 0 1.0 9981 TS 61241-2-2 NULL 1993 IEC 0 9982 TS 61244-1 Determination of long-term radiation ageing in polymers Part 1: Techniques for monitoring diffusion-limited oxidation - 1993 IEC 0 Edition 2.0 9983 TS 61200-52 NULL 1993 IEC 0 9984 TS 61245 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems - Edition 2.0 1993 IEC 0 9985 60619 Electrically operated food preparation appliances - Methods for measuring the performance - Edition 2.0; Includes 1993 IEC 0 Corrigendum: 07/1993, Amendment 1: 09/1995, and Amendment 2: 06/2004 9986 60634 NULL 1993 IEC 0 9987 60598-2-18 Luminaires Part 2: Particular Requirements Section 18: Luminaires for Swimming Pools and Similar Applications - Edition 1993 IEC 0 2.0 9988 60598-2-9 Luminaires Part 2: Particular Requirements Section 9: Photo and Film Luminaires (Non-Professional) - Edition 2.0; 1993 IEC 0 AMD 1 Includes Amendment 1: 06-1993 9989 60404-5 Magnetic materials Part 5: Permanent magnet (magnetically hard) materials Methods of measurement of magnetic 1993 IEC 0 properties - Edition 3.0 9990 60383-1 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 1: Ceramic or Glass Insulator Units for A.C. 1993 IEC 0 Systems - Definitions, Test Methods and Acceptance Criteria - Edition 4.0 9991 60383-2 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 2: Insulator Strings and Insulator Sets for A.C. 1993 IEC 0 Systems - Definitions, Test Methods and Acceptance Criteria - Edition 1.0 9992 60352-3 Solderless connections Part 3: Solderless accessible insulation displacement connections - General requirements, test 1993 IEC 0 methods and practical guidance - Edition 1.0 9993 60027-1 CORR Letter symbols to be used in electrical technology Part 1: General CORRIGENDUM - Edition 6.0 1993 IEC 0 1 9994 60050-704 International Electrotechnical Vocabulary Chapter 704: Transmission - Edition 1.0 1993 IEC 0 9995 60169-26 NULL 1993 IEC 0 9996 60155 Glow-Starters for Fluorescent Lamps - Edition 4.0; Includes Amendment 1: 10/1995 and Amendment 2:11/2006 1993 IEC 0 9997 60115-4-3 NULL 1993 IEC 0 9998 60122-2-1 Quartz Crystal Units for Frequency Control and Selection Part 2: Guide to the Use of Quartz Crystal Units for Frequency 1993 IEC 0 AMD 1 Control and Selection - Section One: Quartz Crystal Units for Microprocessor Clock Supply - Edition 1.0 9999 60141-1 Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories - Part 1: Oil-Filled, Paper-Insulated, Metal Sheathed 1993 IEC 0 Cables and Accessories for Alternating Voltages up to and Including 400 kV - Edition 3.0 10000 60130-3 CORR NULL 1993 IEC 0 1 10001 60244-8 Methods of measurement for radio transmitters - Part 8: Performance characteristics of vestigial-sideband demodulators 1993 IEC 0 used for testing television transmitters and transposers - Edition 2.0 10002 60244-9 Methods of measurement for radio transmitters - Part 9: Performance characteristics for television transposers - Edition 2.0 1993 IEC 0 10003 60255-21-3 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - 1993 IEC 0 Section 3: Seismic tests - Edition 1.0 10004 60287-1-2 Electric Cables - Calculation of the Current Rating - Part 1: Current Rating Equations (100% Load Factor) and Calculation 1993 IEC 0 of Losses - Section 2: Sheath Eddy Current Loss Factors for Two Circuits in Flat Formation - Edition 1.0 10005 60917-2-1 Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional 1993 IEC 0 specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1: Detail specification - Dimensions for cabine 10006 60961 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type L - Edition 2.0 1993 IEC 0 10007 60807-9 Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors - 1993 IEC 0 Edition 1.0 10008 60811-3-2 NULL 1993 IEC 0 AMD 1 10009 60811-1-4 NULL 1993 IEC 0 AMD 1 10010 60870-5-4 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 4: Definition and Coding of Application 1993 IEC 0 Information Elements - Edition 1.0 10011 60867 Insulating Liquids - Specifications for Unused Liquids Based on Synthetic Aromatic Hydrocarbons - Edition 2.0 1993 IEC 0 10012 60834-2 Performance and testing of teleprotection equipment of power systems - Part 2: Analogue comparison systems - Edition 1.0 1993 IEC 0 10013 60835-2-5 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1993 IEC 0 terrestrial radio-relay systems - Section 5: Digital signal processing sub-system - Edition 1.0 10014 60835-2-8 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1993 IEC 0 terrestrial radio-relay systems - Section 8: Adaptive equalizer - Edition 1.0; Includes Amendment 1: 01/1996 10015 60835-3-12 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1993 IEC 0 satellite earth stations - Section 12: Overall system performance - Edition 1.0 10016 60835-3-4 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1993 IEC 0 satellite earth stations - Section 4: Low noise amplifier - Edition 1.0 10017 60835-3-9 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on 1993 IEC 0 satellite earth stations - Section 9: Terminal equipment SCPC-PSK - Edition 1.0 10018 60843-3 Helical-scan video tape cassette system using 8 mm magnetic tape - 8 mm Video - Part 3: High-band specifications for Hi 8 1993 IEC 0 - Edition 1.0 10019 60843-1 Helica1-scan video tape cassette system using 8 mm magnetic tape - 8 mm video - Part 1: General specifications - Edition 1993 IEC 0 2.0 10020 60645-2 Audiometers - Part 2: Equipment for speech audiometry - Edition 1.0 1993 IEC 0 10021 60654-1 Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions - Edition 2.0 1993 IEC 0 10022 60674-3-4 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheets 4 to 6: 1993 IEC 0 Requirements for Polyimide Films Used for Electrical Insulation - Edition 1.0 10023 60674-3-4 TO 6 NULL 1993 IEC 0 10024 60712 Helical-Scan Video-Tape Cassette System Using 19 mm (3/4 in) Magnetic Tape, Known as U-Format - Edition 2.0; 1993 IEC 0 Includes Amendment 1: 1993 10025 60721-3-9 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their 1993 IEC 0 Severities - Section 9: Microclimates Inside Products - Edition 1.0 10026 60747-8-2 NULL 1993 IEC 0 10027 60747-6-3 NULL 1993 IEC 0 10028 60747-2-2 NULL 1993 IEC 0 10029 60740-2 Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification 1993 IEC 0 for the minimum permeabilities of laminations made of soft magnetic metallic materials - Edition 1.0 10030 60748-2-8 Semiconductor Devices Integrated Circuits - Part 2: Digital Integrated Circuits - Section Eight - Blank Detail Specification 1993 IEC 0 for Integrated Circuit Static Read/Write Memories - Edition 1.0 10031 60748-4-1 Semicondutor Devices - Integrated Circuits - Part 4: Interface Integrated Circuits - Section 1: Blank Detail Specification for 1993 IEC 0 Linear Digital-to-Analogue Converters (DAC) - Edition 1.0 10032 60748-4-2 Semiconductor Devices - Integrated Circuits - Part 4: Interface Integrated Circuits - Section 2: Blank Detail Specification 1993 IEC 0 for Linear Analogue-to-Digital Converters (ADC) - Edition 1.0; Same AS IECQ QC 790304 10033 60774-3 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS Part 3: S-VHS - Edition 1993 IEC 0 2.0 10034 61197 Insulating Liquids - Linear Flame Propagation - Test Method Using a Glass-Fibre Tape - Edition 1.0 1993 IEC 0 10035 61198 Mineral Insulating Oils - Methods for the Determination of 2-Furfural and Related Compounds - Edition 1.0 1993 IEC 0 10036 61205 Ultrasonics - Dental Descaler Systems - Measurement and Declaration of the Output Characteristics - Edition 1.0 1993 IEC 0 10037 61213 Analogue Audio Recording on Video Tape - Polarity of Magnetization - Edition 1.0 1993 IEC 0 10038 61214 Hand-Held Mains Voltage Operated Spray Guns - Performance Requirements - Edition 1.0 1993 IEC 0 10039 61224 Nuclear Reactors - Response Time in Resistance Temperature Detectors (RTD) - In Situ Measurements - Edition 1.0 1993 IEC 0 10040 61232 Aluminium-Clad Steel Wires for Electrical Purposes - Edition 1.0 1993 IEC 0 10041 61235 Live Working - Insulating Hollow Tubes for Electrical Purposes - Edition 1.0; Includes Corrigendum: 03/1997, 1993 IEC 0 Corrigendum: 07/1999, and Corrigendum: 05/2000 10042 61239 Nuclear Instrumentation - Portable Gamma Radiation Meters and Spectrometers Used for Prospecting - Definitions, 1993 IEC 0 Requirements and Calibration - Edition 1.0; Replaces IEC 60460: 1974 10043 61241-1-1 NULL 1993 IEC 0 10044 61176 Hand-Held Electric Mains Voltage Operated Circular Saws - Methods for Measuring the Performance - Edition 1.0 1993 IEC 0 10045 61178-2 Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 2: 1993 IEC 0 Sectional Specification - Capability Approval - Edition 1.0 10046 61178-2-1 Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 2: 1993 IEC 0 Sectional Specification - Capability Approval - Section 1: Blank Detail Specification - Edition 1.0 10047 61178-3 Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 3: 1993 IEC 0 Sectional Specification - Qualification Approval - Edition 1.0 10048 61178-3-1 Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 3: 1993 IEC 0 Sectional Specification - Qualification Approval Section 1: Blank Detail Specification - Edition 1.0 10049 61179 Helical-Scan Digital Composite Video Cassette Recording System Using 19 mm Magnetic Tape, Format D2 (NTSC, PAL, 1993 IEC 0 PAL-M) - Edition 1.0 10050 61187 Electrical and Electronic Measuring Equipment - Documentation - Edition 1.0; Replaces IEC 60278:1968 and IEC 1993 IEC 0 60278A:1974 10051 61253-1 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - 1993 IEC 0 Part 1: Generic specification - Qualification approval - Edition 1.0 10052 61253-2 Piezoelectric ceramic resonators - A Specification in the IEC quality assessment system for electronic components (IECQ) - 1993 IEC 0 Part 2: Sectional specification - Qualification approval - Edition 1.0 10053 61253-2-1 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - 1993 IEC 0 Part 2: Sectional specification - Qualification approval - Section 1: Blank detail specification - Assessment level E - Edition 1.0 10054 61254 Electric Shavers for Household Use - Methods for Measuring the Performance - Edition 1.0 1993 IEC 0 10055 61069-2 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1993 IEC 0 assessment Part 2: Assessment methodology - Edition 2.0 10056 61029-2-1 Safety of Transportable Motor-Operated Electric Tools - Part 2-1: Particular Requirements for Circular Saws - Edition 1.0 1993 IEC 0 10057 61029-2-2 Safety of Transportable Motor-Operated Electric Tools Part 2: Particular Requirements for Radial Arm Saws - Edition 1.0 1993 IEC 0 10058 61029-2-3 Safety of Transportable Motor-Operated Electric Tools Part 2: Particular Requirements for Planers and Thicknessers - 1993 IEC 0 Edition 1.0 10059 61029-2-3(2 NULL 1993 IEC 0 10060 61029-2-4 Safety of transportable motor-operated electric tools Part 2: Particular requirements for bench grinders - Edition 1.0 1993 IEC 0 10061 61029-2-5 Safety of Transportable Motor-Operated Electric Tools Part 2: Particular Requirements for Band Saws - Edition 1.0 1993 IEC 0 10062 61029-2-6 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for diamond drills with water supply - 1993 IEC 0 Edition 1.0 10063 61029-2-7 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for diamond saws with water supply - 1993 IEC 0 Edition 1.0 10064 61041-3 Non-broadcast video tape recorders - Methods of measurement - Part 3: Audio characteristics for FM recording - Edition 1993 IEC 0 1.0 10065 61043 Electroacoustics - Instruments for the Measurement of Sound Intensity - Measurement with Pairs of Pressure Sensing 1993 IEC 0 Microphones - Edition 1.0 10066 61079-3 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 3: Electrical 1993 IEC 0 Measurements of Overall Performance of Receiver Systems Comprising an Outdoor Unit and a DBS Tuner Unit - Edition 1.0 10067 61079-4 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 4: Electrical 1993 IEC 0 Measurements on Sound/Data Decoder Units for the Digital Subcarrier NTSC System - Edition 1.0 10068 61079-5 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 5: Electrical 1993 IEC 0 Measurements on Decoder Units for MAC/Packet Systems - Edition 1.0 10069 61106 Videodisks - Methods of Measurement for Parameters - Edition 1.0 1993 IEC 0 10070 61118 Helican-Scan Video Type Cassette System Using 12,65 mm (0,5 in) Magnetic Tape - Type M2 - Edition 1.0 1993 IEC 0 10071 61119-5 Digital Audio Tape Cassette System (DAT) Part 5: DAT for Professional Use - Edition 1.0 1993 IEC 0 10072 61168 Radiotherapy Simulators - Functional Performance Characteristics - Edition 1.0 1993 IEC 0 10073 61125 Unused Hydrocarbon-Based Insulating Liquids - Test Methods for Evaluating the Oxidation Stability - Edition 1.0; 1992 IEC 0 Corrigendum 1: 09/1992 10074 61119-6 Digital Audio Tape Cassette System (DAT) Part 6: Serial Copy Management System - Edition 1.0 1992 IEC 0 10075 61120-4 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 4: Magnetic 1992 IEC 0 Tape Properties: Definitions and Methods of Measurement - Edition 1.0 10076 61119-3 Digital Audio Tape Cassette System (DAT) Part 3: DAT Tape Properties - Edition 1.0 1992 IEC 0 10077 61119-1 Digital Audio Tape Cassette System (DAT) Part 1: Dimensions and Characteristics - Edition 1.0 1992 IEC 0 10078 61115 Expression of Performance of Sample Handling Systems for Process Analyzers - Edition 1.0 1992 IEC 0 10079 61116 Electromechanical Equipment Guide for Small Hydroelectric Installations - Edition 1.0 1992 IEC 0 10080 61143-2 Electrical Measuring Instruments - X-t Recorders Part 2: Recommended Additional Test Methods - Edition 1.0 1992 IEC 0 10081 61144 Test Method for the Determination of Oxygen Index of Insulating Liquids - Edition 1.0 1992 IEC 0 10082 61145 Calibration and Usage of Ionization Chamber Systems for Assay of Radionuclides - Edition 1.0 1992 IEC 0 10083 61151 NULL 1992 IEC 0 10084 61152 Dimensions of Metal-Sheathed Thermometer Elements - Edition 1.0 1992 IEC 0 10085 61100 NULL 1992 IEC 0 10086 61104 Compact Disc Video System - 12 cm CD-V - Edition 1.0 1992 IEC 0 10087 61096 Methods of Measuring the Characteristics of Reproducing Equipment for Digital Audio Compact Discs - Edition 1.0; 1992 IEC 0 Includes Amendment 1: 10/1996 10088 61079-1 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 1: Radio-Frequency 1992 IEC 0 Measurements on Outdoor Units First Edition - Edition 1.0 10089 61079-2 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 2: Electrical 1992 IEC 0 Measurements on DBS Tuner Units - Edition 1.0 10090 61067-2 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 2: Methods of Test - Edition 1.0 1992 IEC 0 10091 61171 Radiation Protection Instrumentation - Monitoring Equipment - Atmospheric Radioactive Iodines in the Environment - 1992 IEC 0 Edition 1.0 10092 61172 Radiation Protection Instrumentation - Monitoring Equipment - Radioactive Aerosols in the Environment - Edition 1.0 1992 IEC 0 10093 61180-1 NULL 1992 IEC 0 10094 61194 NULL 1992 IEC 0 10095 61203 Synthetic Organic Esters for Electrical Purposes - Guide for Maintenance of Transformer Esters in Equipment - Edition 1.0 1992 IEC 0 10096 60748-2-7 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Seven - Blank Detail Specification 1992 IEC 0 for Integrated Circuit Fusible-Link Programmable Bipolar Read-Only Memories - Edition 1.0 10097 60746-4 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane 1992 IEC 0 covered amperometric sensors - Edition 1.0 10098 60746-5 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential - Edition 1992 IEC 0 1.0 10099 60746-5(2 NULL 1992 IEC 0 10100 60748-2-2 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Two - Family Specification for 1992 IEC 0 HCMOS Digital Integrated Circuits, Series 54/74 HC, 54/74 HCT, 54/74 HCU - Edition 1.0; Includes Amendment 1: 6/1994 10101 60748-2-3 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Three - Blank Detail Specification for 1992 IEC 0 HCMOS Digital Integrated Circuits (Series 54/74 HC, 54/74 HCT, 54/74 HCU) - Edition 1.0 10102 60748-2-4 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Four - Family Specification for 1992 IEC 0 Complementary MOS Digital Integrated Circuits, Series 4 000 B and 4 000 UB - Edition 1.0 10103 60748-2-5 Semiconductor devices Integrated circuits Part 2: Digital integrated circuits Section five - Blank detail specification for 1992 IEC 0 complementary MOS digital integrated circuits (series 4 O00 B and 4 O00 UB) - Edition 1.0 10104 60748-11-1 Semiconductor Devices Integrated Circuits Part 11: Section 1: Internal Visual Examination for Semiconductor Integrated 1992 IEC 0 Circuits Excluding Hybrid Circuits - Edition 1.0 10105 60719 Calculation of the Lower and Upper Limits for the Average Outer Dimensions of Cables with Circular Copper Conductors 1992 IEC 0 and of Rated Voltages up to and Including 450/750 V - Edition 2.0 10106 60674-3-2 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: 1992 IEC 0 Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation - Edition 1.0 10107 60674-3-3 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: 1992 IEC 0 Requirements for polycarbonate (PC) films used for electrical insulation - Edition 1.0 10108 60642-3 Piezoelectric ceramic resonators - Part 3: Standard outlines - Edition 1.0 1992 IEC 0 10109 60674-3-7 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: 1992 IEC 0 Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation - Edition 1.0 10110 60843-2 Helical-scan video tape cassette system using 8 mm magnetic tape - 8 mm Video - Part 2: PCM multi-track audio system - 1992 IEC 0 Edition 1.0 10111 60835-2-3 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1992 IEC 0 terrestrial radio-relay systems - Section 3: RF branching networks - Edition 1.0 10112 60835-2-10 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on 1992 IEC 0 terrestrial radio-relay systems - Section ten: Overall system performance - Edition 1.0 10113 60835-1-2 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements 1992 IEC 0 common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics - Edition 1.0; Includes Amendment 1: 10114 60835-1-3 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements 1992 IEC 0 common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics - Edition 1.0; Includes Amend 10115 60835-1-4 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements 1992 IEC 0 common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance - Edition 1.0; Includes Amendment 10116 60870-5-2 Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures - Edition 1.0 1992 IEC 0 10117 60870-5-3 Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structure of application data - 1992 IEC 0 Edition 1.0 10118 60852-2 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 2: 1992 IEC 0 Transformers and inductors using YEx-2 laminations for printed wiring board mounting - Edition 1.0 10119 60852-3 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: 1992 IEC 0 Transformers and inductors using YUI-1 laminations - Edition 1.0 10120 60807-8 Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and 1992 IEC 0 earthing contacts for cable screen - Edition 1.0 10121 60807-2 Rectangular Connectors for Frequencies Below 3 MHz - Part 2: Detail Specification for a Range of Connectors, with 1992 IEC 0 Assessed Quality, with Trapezoidal Shaped Metal Shells and Round Contacts - Fixed Solder Contact Types - Edition 2.0; Same AS IECQ QC 030000 10122 60933-5 Audio, video and audiovisual systems - Interconnections and matching values - Part 5: Y/C connector for video systems - 1992 IEC 0 Electrical matching values and description of the connector - Edition 1.0 10123 60917-2 Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional 1992 IEC 0 specification - Interface co-ordination dimensions for the 25 mm equipment practice - Edition 1.0 10124 60264-4-2 Packaging of winding wires Part 4: Methods of test Section 2: Containers made from thermoplastic material for taper 1992 IEC 0 barrelled delivery spools - Edition 1.0 10125 60240-1 Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters - Edition 2.0 1992 IEC 0 10126 60244-5 Methods of measurement for radio transmitters - Part 5: Performance characteristics of television transmitters - Edition 2.0 1992 IEC 0 10127 60115-2-2 NULL 1992 IEC 0 10128 60115-4-2 NULL 1992 IEC 0 10129 60115-6-101 NULL 1992 IEC 0 10130 60115-6-102 NULL 1992 IEC 0 10131 60169-25 Radio-Frequency Connectors Part 25: Two-Pole Screw (3/4-20 UNEF) Coupled Connectors for Use with Shielded 1992 IEC 0 Balanced Cables Having Twin Inner Conductors with Inner Diameter of Outer Conductor 13,56 mm (0,534 in) (Type TWHN) - Edition 1.0 10132 60050-722 International Electrotechnical Vocabulary Chapter 722: Telephony - Edition 1.0 1992 IEC 0 10133 60050-714 International Electrotechnical Vocabulary Chapter 714: Switching and Signalling in Telecommunications - Edition 1.0 1992 IEC 0 10134 60050-702 International Electrotechnical Vocabulary Chapter 702: Oscillations, Signals and Related Devices - Edition 1.0; Includes 1992 IEC 0 Corrigendum 1: 05/1992; Corrigendum 2: 12/1994 10135 60050-712 International Electrotechnical Vocabulary Chapter 712: Antennas - Edition 1.0 1992 IEC 0 10136 60027-1 Letter symbols to be used in electrical technology Part 1: General - Edition 6.0; Corrected and Reprinted 03/31/1995 1992 IEC 0 10137 60068-4 AMD NULL 1992 IEC 0 1 10138 60371-3-4 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester 1992 IEC 0 Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder - Edition 1.0; Includes Amendment 1: 9/2006 10139 60371-3-6 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed 1992 IEC 0 Mica Paper with a B-Stage Epoxy Resin Binder - Edition 1.0 10140 60404-12 Magnetic Materials Part 12: Guide to Methods of Assessment of Temperature Capability of Interlaminar Insulation 1992 IEC 0 Coatings - Edition 1.0 10141 60393-5-1 Potentiometers for Use in Electronic Equipment Part 5: Blank Detail Specification: Single-Turn Rotary Low-Power 1992 IEC 0 Potentiometers Assessment Level E - Edition 1.0 10142 60393-5-2 Potentiometers for Use in Electronic Equipment Part 5: Blank Detail Specification: Single-Turn Rotary Low-Power 1992 IEC 0 Potentiometers Assessment Level F - Edition 1.0 10143 60393-2-2 Potentiometers for Use in Electronic Equipment Part 2: Blank Detail Specification: Lead-Screw Actuated and Rotary Preset 1992 IEC 0 Potentiometers Assessment Level F - Edition 1.0 10144 60393-3 Potentiometers for Use in Electronic Equipment Part 3: Sectional Specification: Rotary Precision Potentiometers - Edition 1992 IEC 0 2.0; (Same As IECQ QC 410400) 10145 60393-3-1 Potentiometers for Use in Electronic Equipment Part 3: Blank Detail Specification: Rotary Precision Potentiometers 1992 IEC 0 Assessment Level E - Edition 1.0 10146 60393-4 Potentiometers for Use in Electronic Equipment Part 4: Sectional Specification: Single-Turn Rotary Power Potentiometers - 1992 IEC 0 Edition 2.0; (Same As IECQ QC 410200) 10147 60393-4-1 Potentiometers for Use in Electronic Equipment Part 4: Blank Detail Specification: Single-Turn Rotary Power 1992 IEC 0 Potentiometers Assessment Level E - Edition 1.0 10148 60393-4-2 Potentiometers for Use in Electronic Equipment Part 4: Blank Detail Specification: Single-Turn Rotary Power 1992 IEC 0 Potentiometers Assessment Level F - Edition 1.0 10149 60393-5 Potentiometers for use in electronic equipment Part 5: Sectional specification Single-turn rotary low-power wirewound 1992 IEC 0 and non-wirewound potentiometers - Edition 3.0 10150 60317-39 Specifications for particular types of winding wires Part 39: Glass-fibre braided resin or varnish-impregnated, bare or 1992 IEC 0 enamelled rectangular copper wire, temperature index 180 - Edition 2.0 10151 60317-40 Specifications for particular types of winding wires Part 40: Glass-fibre braided resin or varnish-impregnated, bare or 1992 IEC 0 enamelled rectangular copper wire, temperature index 200 - Edition 2.0 10152 60510-2-5 Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - 1992 IEC 0 Section five: Frequency modulators - Edition 1.0 10153 60510-2-6 Methods of measurements for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - 1992 IEC 0 Section six: Frequency demodulators - Edition 1.0 10154 60510-3-4 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement on 1992 IEC 0 combinations of sub-systems - Section four: Measurements for frequency division multiplex (f.d.m.) transmission - Edition 1.0 10155 60454-1 Specifications for pressure-sensitive adhesive tapes for electrical purposes Part 1: General requirements - Edition 2.0 1992 IEC 0 10156 60603-11 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 11: Detail Specification for Concentric 1992 IEC 0 Connectors (Dimensions for Free Connectors and Fixed Connectors) - Edition 1.0 10157 60603-12 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 12: Detail Specification for Dimensions, 1992 IEC 0 General Requirements and Tests for a Range of Sockets Designed for Use with Integrated Circuits - Edition 1.0 10158 TS 61085 General Considerations for Telecommunication Services for Electric Power Systems - Edition 1.0 1992 IEC 0 10159 TS 60146-6 NULL 1992 IEC 0 10160 TR 61127 High Pressure Xenon Short Arc Lamps - Dimensional, Electrical and Photometric Data and Cap Types - Edition 1.0 1992 IEC 0 10161 TR 61141 Upper Frequency Limit of R.F. Coaxial Connectors - Edition 1.0 1992 IEC 0 10162 TR 61000-2-3 Electromagnetic compatibility (EMC) Part 2: Environment Section 3: Description of the environment - Radiated and non- 1992 IEC 0 network-frequency-related conducted phenomena - Edition 1.0 10163 TR 61000-1-1 Electromagnetic compatibility (EMC) Part 1: General Section 1: Application and interpretation of fundamental definitions 1992 IEC 0 and terms - Edition 1.0 10164 MULTILINGU NULL 1992 IEC 0 AL V1 10165 MULTILINGU NULL 1992 IEC 0 AL V2 10166 MULTILINGU NULL 1992 IEC 0 AL V3 10167 MULTILINGU NULL 1992 IEC 0 AL V4 10168 MULTILINGU NULL 1992 IEC 0 AL V5 10169 TR 61055-1 Measurement Techniques and Operational Adjustments of Broadcast VTRs Part 1: Operational Adjustments on Analogue 1991 IEC 0 Composite Broadcast VTRs - Edition 1.0 10170 TR 61055-2 Measurement Techniques and Operational Adjustments of Broadcast VTRs Part 2: Special Mechanical Measurements and 1991 IEC 0 Alignments - Edition 1.0 10171 TR 61056-3 NULL 1991 IEC 0 10172 TR 61088 Characteristics and Measurements of Ultrasonic Piezoceramic Transducers - Edition 1.0 1991 IEC 0 10173 TR 60034-16-2 Rotating electrical machines Part 16: Excitation systems for synchronous machines Chapter 2: Models for power system 1991 IEC 0 studies - Edition 1.0 10174 TS 61081 Pneumatic Instruments Driven by Associated Process Gas - Safe Installation and Operating Procedures - Guidelines - 1991 IEC 0 Edition 1.0 10175 60603-1 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 1: Generic Specification - General 1991 IEC 0 Requirements and Guide for the Preparation of Detail Specifications, with Assessed Quality - Edition 2.0; Includes Amendment 1: 06-1992; 10176 60603-10 NULL 1991 IEC 0 10177 60507 Artificial Pollution Tests on High-Voltage Insulators to Be Used on A.C. Systems - Edition 3.0 1991 IEC 0 10178 60489-4 Methods of measurement for radio equipment used in the mobile services Part 4: Transmitters employing single-sideband 1991 IEC 0 emissions (R3E, H3E or J3E) - Edition 2.0 10179 60489-2 Methods of measurement for radio equipment used in the mobile services - Part 2: Transmitters employing A3E, F3E or 1991 IEC 0 G3E emissions - Edition 2.0; Includes Amendment 1: 07/1999 10180 60404-8-8 Magnetic Materials Part 8: Specifications for Individual Materials Section 8 - Specification for Thin Magnetic Steel Strip 1991 IEC 0 for Use at Medium Frequencies - Edition 1.0 10181 60343 Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface 1991 IEC 0 Discharges - Edition 2.0 10182 60382 Analogue pneumatic signal for process control systems - Edition 2.0 1991 IEC 0 10183 60072-1 Dimensions and Output Series for Rotating Electrical Machines Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 1991 IEC 0 to 1080 - Edition 6.0 10184 60068-3-3 Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments - Edition 1.0 1991 IEC 0 10185 60068-2-61 Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence - Edition 1.0 1991 IEC 0 10186 60050-561 International electrotechnical vocabulary Part 561: Piezoelectric, dielectric and electrostatic devices and associated 1991 IEC 0 materials for frequency control, selection and detection - Edition 2.0 10187 60045-1 Steam Turbines Part 1: Specifications - Edition 1.0 1991 IEC 0 10188 60034-6 Rotating Electrical Machines Part 6: Methods of Cooling (IC Code) - Edition 2.0 1991 IEC 0 10189 60041 Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump- 1991 IEC 0 Turbines - Edition 3.0; Includes Corrigendum: 1996 10190 60050-721 International Electrotechnical Vocabulary Chapter 721: Telegraphy, Facsimile and Data Communication - Edition 1.0 1991 IEC 0 10191 60050-731 International Electrotechnical Vocabulary Chapter 731: Optical Fibre Communication - Edition 1.0; Includes Corrigendum: 1991 IEC 0 03/1992 and Corrigendum: 07/1992 10192 60050-811 International Electrotechnical Vocabulary Chapter 811: Electric Traction - Edition 1.0 1991 IEC 0 10193 60050-811(2 NULL 1991 IEC 0 10194 60169-23 Radio-Frequency Connectors Part 23: Pin and Socket Connector for Use with 3,5 mm Rigid Precision Coaxial Lines with 1991 IEC 0 Inner Diameter of Outer Conductor 3,5 mm (0,1378 in) - Edition 1.0 10195 60169-24 NULL 1991 IEC 0 10196 60146-1-3 Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-3: Transformers and Reactors - 1991 IEC 0 Edition 3.0 10197 60097 Grid System for Printed Circuits - Edition 4.0 1991 IEC 0 10198 60122-2-1 Quartz crystal units for frequency control and selection Part 2: Guide to the use of quartz crystal units for frequency control 1991 IEC 0 and selection - Section one: Quartz crystal units for microprocessor clock supply - Edition 1.0 10199 60244-13 Methods of measurement for radio transmitters - Part 13: Performance characteristics for FM sound broadcasting - Edition 1991 IEC 0 1.0 10200 60268-10 Sound system equipment - Part 10: Peak programme level meters - Edition 2.0 1991 IEC 0 10201 60315-6 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 6: General Purpose Communication 1991 IEC 0 Receivers - Edition 1.0; Includes Corrigendum: 02/1997 10202 60994 Guide for Field Measurement of Vibrations and Pulsations in Hydraulic Machines (Turbines, Storage Pumps and Pump- 1991 IEC 0 Turbines) - Edition 1.0 10203 60989 Separating Transformers, Autotransformers, Variable Transformers and Reactors - Edition 1.0 1991 IEC 0 10204 60807-1 Rectangular Connectors for Frequencies Below 3 MHz Part 1: Generic Specification - General Requirements and Guide for 1991 IEC 0 the Preparation of Detail Specifications for Connectors with Assessed Quality - Edition 2.0; Same As IECQ QC 030000 10205 60807-7 Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized 1991 IEC 0 guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/fro 10206 60821 IEC 821 VMEbus - Microprocessor System bus fir 1 byte to 4 byte data - Edition 2.0; Includes Amendment 1: 01/1999 1991 IEC 0 10207 60839-5-2 Alarm and electronic security systems Part 5-2: Alarm transmission systems Requirements for supervised premises 1991 IEC 0 transceiver (SPT) - Edition 2.0 10208 60839-5-1 Alarm and electronic security systems Part 5-1: Alarm transmission systems General requirements - Edition 2.0 1991 IEC 0 10209 60839-5-4 NULL 1991 IEC 0 10210 60839-5-5 NULL 1991 IEC 0 10211 60839-5-6 NULL 1991 IEC 0 10212 60721-2-5 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Section 5: Dust, Sand, 1991 IEC 0 Salt Mist - Edition 1.0 10213 60748-2-1 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section One - Blank Detail Specification for 1991 IEC 0 Bipolar Monolithic Digital Integrated Circuit Gates (Excluding Uncommitted Logic Arrays) - Edition 1.0 10214 60747-10 NULL 1991 IEC 0 10215 60735 Measuring Methods for Video Tape Properties - Edition 2.0 1991 IEC 0 10216 60748-3-1 Semiconductor Devices Integrated Circuits Part 3: Analogue Integrated Circuits Section One - Blank Detail Specification 1991 IEC 0 for Monolithic Integrated Operational Amplifiers - Edition 1.0; Same as IECQ QC 790202 10217 60748-2-6 Semiconductor devices Integrated circuits Part 2: Digital integrated circuits Section six - Blank detail specification for 1991 IEC 0 microprocessor integrated circuits - Edition 1.0 10218 60756 Non-Broadcast Video Tape Recorders - Time Base Stability - Edition 2.0; CENELEC EN 60756: 1993 1991 IEC 0 s) 1991 IEC 0_آResidual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO 61009-2-1 10219 s functionally independent of line voltage - Edition 1.0_آPart 2-1: Applicability of the general rules to RCBO s) 1991 IEC 0_آResidual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO 61009-2-2 10220 s functionally dependent on line voltage - Edition 1.0_آPart 2-2: Applicability of the general rules to RCBO 10221 61049 Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits Performance Requirements - Edition 1.0 1991 IEC 0 10222 61050 Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1 000 V (Generally Called 1991 IEC 0 Neon-Transformers) General and Safety Requirements - Edition 1.0; Includes Corrigendum: 03/1992 and Amendment 1: 6/1994 10223 61051-2 Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors - Edition 1.0 1991 IEC 0 10224 61051-2-2 Varistors for use in electronic equipment - Part 2: Blank detail specification for zinc oxide surge suppression varistors. 1991 IEC 0 Assessment level E - Edition 1.0 10225 61052 IEC 1052 FASTBUS STANDARD ROUTINES Standard Routines for Use with FASTBUS Data Acquisition System - 1991 IEC 0 Edition 1.0 10226 61053-1 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type Beta format - FM audio recording - 1991 IEC 0 Part 1: 625 line-50 field systems - Edition 1.0 10227 61053-2 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type Beta Format - FM Audio 1991 IEC 0 Recording Part 2: 525 Line-60 Field Systems - Edition 1.0 10228 61033 Test Methods for the Determination of Bond Strength of Impregnating Agents to an Enamelled Wire Substrate - Edition 1991 IEC 0 1.0; Includes Amendment 1: 04/2006 10229 61028 Electrical Measuring Instruments - X-Y Recorders - Edition 1.0; Includes Amendment 1: 1995 and Amendment 2: 1997 1991 IEC 0 10230 61017-1 NULL 1991 IEC 0 10231 61019-3 Surface acoustic wave (SAW) resonators Part 3: Standard outlines and lead connections - Edition 1.0 1991 IEC 0 10232 61018 NULL 1991 IEC 0 10233 61057 Aerial Devices with Insulating Boom Used for Live Working - Edition 1.0; Includes Corrigendum: 07/1999 1991 IEC 0 10234 61063 Acoustics - Measurement of Airborne Noise Emitted by Steam Turbines and Driven Machinery - Edition 1.0 1991 IEC 0 10235 61064 Acceptance Tests for Steam Turbine Speed Control Systems - Edition 1.0 1991 IEC 0 10236 61065 Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing - Edition 1.0; 1991 IEC 0 Includes Corrigendum 1: 12/1993 10237 61067-1 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 1: Definitions, Classification and General 1991 IEC 0 Requirements - Edition 1.0 10238 61068-1 Specification for Polyester Fibre Woven Tapes Part 1: Definitions, Designation and General Requirements - Edition 1.0 1991 IEC 0 10239 61068-2 Specification for Polyester Fibre Woven Tapes Part 2: Methods of Test - Edition 1.0 1991 IEC 0 10240 61069-1 Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system 1991 IEC 0 assessment Part 1: Terminology and basic concepts - Edition 2.0 10241 61070 Compliance Test Procedures for Steady-State Availability - Edition 1.0 1991 IEC 0 10242 61075 NULL 1991 IEC 0 10243 61080 Guide to the Measurement of Equivalent Electrical Parameters of Quartz Crystal Units - Edition 1.0 1991 IEC 0 10244 61077 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - Compact VHS Video 1991 IEC 0 Cassette - Edition 1.0 10245 61084-1 Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements - Edition 2.0 1991 IEC 0 10246 61089 NULL 1991 IEC 0 10247 61105 Reference Tapes for Video Tape Recorder Systems - Edition 1.0 1991 IEC 0 10248 61119-2 Digital Audio Tape Cassette System Part 2: DAT Calibration Tape - Edition 1.0 1991 IEC 0 10249 61120-1 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 1: General 1991 IEC 0 Requirements - Edition 1.0 10250 61120-2 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 2: Format A - 1991 IEC 0 Edition 1.0 10251 61120-3 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 3: Format B - 1991 IEC 0 Edition 1.0 10252 61123 Reliability Testing Compliance Test Plans for Success Ratio - Edition 1.0; Replaces IEC 60605-5: 1982 1991 IEC 0 10253 61012 Filters for the Measurement of Audible Sound in the Presence of Ultrasound - Edition 1.0 1990 IEC 0 10254 61021-1 Laminated Core Packages for Transformers and Inductors Used in Telecommunication and Electronic Equipment Part 1: 1990 IEC 0 Dimensions - Edition 1.0 10255 61029-1 Safety of Transportable Motor-Operated Electric Tools Part 1: General Requirements - Edition 1.0 1990 IEC 0 10256 61031 Design, Location and Application Criteria for Installed Area Gamma Radiation Dose Rate Monitoring Equipment for Use 1990 IEC 0 in Nuclear Power Plants During Normal Operation and Anticipated Operational Occurrences - Edition 1.0 10257 61040 NULL 1990 IEC 0 10258 61041-1 Non-broadcast video tape recorders. Methods of measurement - Part 1: General, video (NTSC/PAL) and audio 1990 IEC 0 (longitudinal) characteristics - Edition 1.0 10259 61008-2-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses 1990 IEC 0 s functionally independent of line voltage - Edition 1.0_آS) Part 2-1: Applicability of the general rules to RCCB_آRCCB) 10260 61008-2-2 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses 1990 IEC 0 s functionally dependent on line voltage - Edition 1.0_آS) Part 2-2: Applicability of the general rules to RCCB_آRCCB) 10261 60748-11 Semiconductor Devices - Integrated Circuits Part 11: Sectional Specification for Semiconductor Integrated Circuits 1990 IEC 0 Excluding Hybrid Circuits - Edition 1.0; Includes Amendment 1: 06/1995 and Amendment 2: 04/1999 10262 60721-2-6 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Earthquake Vibration 1990 IEC 0 and Shock - Edition 1.0 10263 60870-4 Telecontrol equipment and systems. Part 4: Performance requirements - Edition 1.0 1990 IEC 0 10264 60870-5-1 Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats - Edition 1990 IEC 0 1.0 10265 60835-1-1 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1: Measurements 1990 IEC 0 common to terrestrial radio-relay systems and satellite earth stations - Section One: General - Edition 1.0 10266 60835-2-1 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 2: Measurements on 1990 IEC 0 terrestrial radio-relay systems - Section One: General - Edition 1.0 10267 60835-3-1 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3: Measurements on 1990 IEC 0 satellite earth stations - Section One: General - Edition 1.0 10268 60807-3 Rectangular connectors for frequencies below 3 MHz. Part 3: Detail specification for a range of connectors with trapezoidal 1990 IEC 0 shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction - 10269 60796-1 Microprocessor system bus - 8-Bit and 16-Bit data (MULTIBUS I) Part 1: Functional description with electrical and timing 1990 IEC 0 specifications - Edition 1.0 10270 60796-2 Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS I) Part 2: Mechanical and pin descriptions for the system 1990 IEC 0 bus configuration, with edge connectors (direct) - Edition 1.0 10271 60796-3 Microprocessor System BUS I, 8-Bit and 16-Bit Data Part 3: Mechanical and Pin Descriptions for the Eurocard 1990 IEC 0 Configuration with pin and socket (indirect) connectors - Edition 1.0 10272 60953-1 Rules for Steam Turbine Thermal Acceptance Tests Part 1: Method A - High Accuracy for Large Condensing Steam 1990 IEC 0 Turbines - Edition 1.0 10273 60953-2 Rules for steam turbine thermal acceptance Tests Part 2: Method B - Wide range of accuracy for various types and sizes of 1990 IEC 0 turbines - Edition 1.0 10274 60264-2-2 Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section 2 - Specification for returnable spools 1990 IEC 0 made from thermoplastic material - Edition 1.0 10275 60264-2-3 Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section 3 - Specification for non-returnable spools 1990 IEC 0 made from thermoplastic mat erial - Edition 1.0 10276 60264-3-3 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 3 - Specification for Non-Returnable Spools 1990 IEC 0 Made from Thermoplastic Material - Edition 1.0; Includes Amendment 1: 12/2003 10277 60268-17 Sound System Equipment Part 17: Standard Volume Indicators - Edition 1.0; Includes Corrigendum 1: 09/1991 1990 IEC 0 10278 60273 Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V - Edition 1990 IEC 0 3.0 10279 60255-8 NULL 1990 IEC 0 10280 60183 AMD 1 NULL 1990 IEC 0 10281 60050-541(2 NULL 1990 IEC 0 10282 60050-466 International Electrotechnical Vocabulary Chapter 466: Overhead Lines - Edition 1.0 1990 IEC 0 10283 60050-466(2 NULL 1990 IEC 0 10284 60050-436 International Electrotechnical Vocabulary Chapter 436: Power Capacitors - Edition 1.0 1990 IEC 0 10285 60050-421 International Electrotechnical Vocabulary Chapter 421: Power Transformers and Reactors - Edition 1.0 1990 IEC 0 10286 60050-221 International Electrotechnical Vocabulary - Chapter 221: Magnetic Materials and Components - Edition 1.0; Includes 1990 IEC 0 Amendment 1: 01/1993 and Amendment 2: 04/1999 10287 60050-191 International Electrotechnical Vocabulary - Chapter 191: Dependability and Quality of Service - Edition 1.0 1990 IEC 0 10288 60050-161 International Electrotechnical Vocabulary Chapter 161: Electromagnetic Compatibility - Edition 1.0 1990 IEC 0 10289 60068-2-59 NULL 1990 IEC 0 10290 60068-5-2 Environmental Testing Part 5: Guide to Drafting of Test Methods - Terms and Definitions - Edition 1.0 1990 IEC 0 10291 60072-2 Dimensions and Output Series for Rotating Electrical Machines Part 2: Frame Numbers 355 to 1 000 and Flange Numbers 1990 IEC 0 1180 to 2360 - Edition 1.0 10292 60317-26 Specifications for particular types of winding wires Part 26: Polyamide-imide enamelled round copper wire, class 200 - 1990 IEC 0 Edition 2.0 10293 60317-28 Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 - 1990 IEC 0 Edition 2.0 10294 60317-29 Specifications for particular types of winding wires Part 29: Polyester or polyesterimide overcoated with polyamide-imide 1990 IEC 0 enamelled rectangular copper wire, class 200 - Edition 1.0 10295 60603-8 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 8: Two-Part Connectors for Printed Boards for 1990 IEC 0 Basic Grid of 2,54 mm (0,1 in), with Square Male Contacts of 0,63 mm x 0,63 mm First Edition - Edition 1.0 10296 60603-9 NULL 1990 IEC 0 10297 TR 61015 Brush-Holders for Electrical Machines Guide to the Measurement of the Static Thrust Applied to Brushes - Edition 1.0 1990 IEC 0 10298 TR 61000-2-1 Electromagnetic compatibility (EMC) Part 2: Environment Section 1: Description of the environment - electromagnetic 1990 IEC 0 environment for low-frequency conducted disturbances and signalling in public power supply systems - Edition 1.0 10299 TR 60079-16 Electrical Apparatus for Explosive Gas Atmospheres Part 16: Artificial Ventilation for the Protection of Analyzer(s) 1990 IEC 0 Houses - Edition 1.0 10300 TR 60099-3 NULL 1990 IEC 0 10301 TR 60972 NULL 1989 IEC 0 10302 TR 60996 Method for Verifying Accuracy of Tan Delta Measurements Applicable to Capacitors - Edition 1.0 1989 IEC 0 10303 60510-2-7 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. 1989 IEC 0 Section Seven: High-power amplifier - Edition 1.0 10304 60510-2-3 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. 1989 IEC 0 Section Three: Low noise amplifier - Edition 1.0 10305 60584-2 AMD NULL 1989 IEC 0 1 10306 60384-10-1 NULL 1989 IEC 0 10307 60353 Line traps for a.c. power systems - Edition 2.0 1989 IEC 0 10308 60393-2 Potentiometers for use in electronic equipment Part 2: Sectional specification Lead-screw actuated and rotary preset 1989 IEC 0 potentiometers - Edition 3.0 10309 60393-2-1 Potentiometers for Use in Electronic Equipment Part 2: Blank Detail Specification: Lead-Screw Actuated and Rotary Preset 1989 IEC 0 Potentiometers Assessment Level E - Edition 1.0 10310 60404-8-5 Magnetic Materials Part 8: Specifications for Individual Materials Section Five - Specification for Steel Sheet and Strip 1989 IEC 0 with Specified Mechanical Properties and Magnetic Permeability - Edition 1.0 10311 60092-305 Amendment 1 Electrical installations in ships Part 305: Equipment - Accumulator (storage) batteries - Edition 3.0 1989 IEC 0 AMD 1 10312 60050-541 International Electrotechnical Vocabulary Chapter 541: Printed Circuits - Edition 1.0 1989 IEC 0 10313 60115-8-1 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low 1989 IEC 0 power film resistors for general electronic equipment, classification level G - Edition 2.0 10314 60107-6 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 6: Measurement under 1989 IEC 0 Conditions Different from Broadcast Signal Standards - Edition 1.0 10315 60261 Sealing Test for Pressurized Waveguide Tubing and Assemblies - Edition 2.0 1989 IEC 0 10316 60244-11 Methods of measurement for radio transmitters. Part 11: Transposers for FM sound broadcasting - Edition 1.0 1989 IEC 0 10317 60264-2-1 Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section One - Basic dimensions - Edition 1.0 1989 IEC 0 10318 60973 Test Procedures for Germanium Gamma-Ray Detectors - Edition 1.0; Replaces IEC 60430: 1973, IEC 60656: 1979 and 1989 IEC 0 IEC 60697: 1981 10319 60978 NULL 1989 IEC 0 10320 60979 Wires for Wire Wrapping Applications - Edition 1.0 1989 IEC 0 10321 60980 Recommended Practices for Seismic Qualification of Electrical Equipment of the Safety System for Nuclear Generating 1989 IEC 0 Stations - Edition 1.0 10322 60982 Level Measuring Systems Utilizing Ionizing Radiation with Continuous or Switching Output - Edition 1.0; Replaces IEC 1989 IEC 0 60346: 1971 10323 60993 Electrolyte for Vented Nickel-Cadmium Cells - Edition 1.0 1989 IEC 0 10324 60811-1-2 NULL 1989 IEC 0 AMD 1 10325 60853-2 Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV 1989 IEC 0 and emergency ratings for cables of all voltages - Edition 1.0 10326 60870-3 Telecontrol equipment and systems. Part 3: Interfaces (electrical characteristics) - Edition 1.0 1989 IEC 0 10327 60870-1-2 Telecontrol equipment and systems. Part 1: General considerations. Section Two: Guide for specifications - Edition 1.0 1989 IEC 0 10328 60745-2-7 Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for spray guns for non-flammable liquids 1989 IEC 0 - Edition 1.0 10329 61016 Helical-Scan Digital Component Video Cassette Recording System Using 19 mm Magnetic Tape (Format D-1) - Edition 1989 IEC 0 1.0; Includes Amendment 1: 02/1999 10330 60674-2 Specification for plastic films for electrical purposes - Part 2: Methods of test - Edition 2.0 1988 IEC 0 10331 60748-20 Semiconductor Devices - Integrated Circuits - Part 20: Generic Specification for Film Integrated Circuits and Hybrid Film 1988 IEC 0 Integrated Circuits - Edition 1.0; Includes Amendment 1: 9/1995 10332 60841 Audio Recording - PCM Encoder/Decoder System - Edition 1.0 1988 IEC 0 10333 60807-6 Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range of rectangular connectors 1988 IEC 0 with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types - Edition 1.0 10334 60822 IEC 822 VSB Parallel Sub-System Bus of the IEC 821 VMEbus - Edition 1.0 1988 IEC 0 10335 60824 Terminology related to microprocessors - Edition 1.0 1988 IEC 0 10336 60940 Guidance Information on the Application of Capacitors, Resistors, Inductors, and Complete Filter Units for Radio 1988 IEC 0 Interference Suppression - Edition 2.0 10337 60910 Containment Monitoring Instrumentation for Early Detection of Developing Deviations from Normal Operation in Light 1988 IEC 0 Water Reactors - Edition 1.0 10338 60944 Guide for the Maintenance of Silicone Transformer Liquids - Edition 1.0 1988 IEC 0 10339 60946 Binary Direct Voltage Signals for Process Measurement and Control Systems - Edition 1.0 1988 IEC 0 10340 60885-3 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded 1988 IEC 0 power cables - Edition 2.0 10341 60948 Numeric Keyboard for Home Electronic Systems (HES) - Edition 1.0 1988 IEC 0 10342 60949 Calculation of Thermally Permissible Short-Circuit Currents, Taking into Account Non-Adiabatic Heating Effects - Edition 1988 IEC 0 1.0 10343 60962 NULL 1988 IEC 0 10344 60963 Specification for Unused Polybutenes - Edition 1.0 1988 IEC 0 10345 60960 Functional Design Criteria for a Safety Parameter Display System for Nuclear Power Stations - Edition 1.0 1988 IEC 0 10346 60268-1 AMD Amendment 1 Sound system equipment Part 1: General - Edition 2.0 1988 IEC 0 1 10347 60268-1 AMD Amendment 2 Sound system equipment Part 1: General - Edition 2.0 1988 IEC 0 2 10348 60315-1 Methods of Measurement on Radio Receivers for Various Classes of Emission; Part 1: General Considerations and 1988 IEC 0 Methods of Measurement, Including Audio-Frequency Measurements - Edition 2.0; Includes Corrigendum: 1997 10349 60255-21-1 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - 1988 IEC 0 Section One: Vibration tests (sinusoidal) - Edition 1.0 10350 60255-21-2 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - 1988 IEC 0 Section Two: Shock and bump tests - Edition 1.0 10351 60169-1-3 Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods Section Three - Electrical Tests and 1988 IEC 0 Measuring Procedures: Screening Effectiveness - Edition 1.0; Includes Amendment 1: 1996 10352 60094-5 Magnetic Tape Sound Recording and Reproducing Systems Part 5: Electrical Magnetic Tape Properties - Edition 1.0; 1988 IEC 0 Includes Amendment 1: 2/1996 10353 60094-10 Magnetic Tape Sound Recording and Reproducing Systems Part 10: Time and Address Codes - Edition 1.0 1988 IEC 0 10354 60094-11 Magnetic Tape Sound Recording and Reproducing Systems Part 11: Address Code for Compact Cassettes - Edition 1.0 1988 IEC 0 10355 60127-5 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links - Edition 2.0 1988 IEC 0 10356 60127-3 Miniature fuses Part 3: Sub-miniature fuse-links - Edition 3.0 1988 IEC 0 10357 60050-701 International Electrotechnical Vocabulary Chapter 701: Telecommunications, Channels and Networks 1988 IEC 0 10358 60051-9 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: Recommended Test 1988 IEC 0 Methods - Edition 4.0 10359 60068-1 Environmental Testing Part 1: General and Guidance - Edition 7.0 1988 IEC 0 10360 60404-10 Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium 1988 IEC 0 frequencies - Edition 2.0 10361 60394-3-2 Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Glass-Fabric Based 1988 IEC 0 Varnished Fabrics with Epoxy, Polyurethane, Silicone, Polyester, Bituminous or Oleoresinous Varnish - Edition 1.0 10362 60368-2-1 Piezoelectric Filters Part 2: Guide to the Use of Piezoelectric Filters Section One - Quartz Crystal Filters - Edition 2.0 1988 IEC 0 10363 60510-1-5 Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems 1988 IEC 0 and combinations of sub-systems. Section Five: Noise temperature measurements - Edition 1.0 10364 60510-3-3 Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on 1988 IEC 0 combinations of sub-systems. Section Three: Measurements for monochrome and colour television transmission - Edition 1.0 10365 60510-2-4 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. 1988 IEC 0 Section Four: Up- and down-converters - Edition 1.0 10366 60489-3 Methods of Measurement for Radio Equipment Used in the Mobile Services - Part 3: Receivers Employing A3E, F3E or 1988 IEC 0 G3E Emissions - Edition 2.0; Includes Amendment 1: 04-1999 10367 60465 Specification for unused insulating mineral oils for cables with oil ducts - Edition 2.0 1988 IEC 0 10368 60455-3-11 Specification for solventless polymerisable resinous compounds used for electrical insulation Part 3: Specifications for 1988 IEC 0 individual materials Sheet 11: Epoxy resin-based coating powders - Edition 1.0 10369 TR 60828 Pin Allocations for Microprocessor Systems Using the IEC 603-2 Connector - Edition 1.0 1988 IEC 0 10370 TR 60870-1-1 Telecontrol Equipment and Systems Part 1: General Considerations Section One - General Principles - Edition 1.0 1988 IEC 0 10371 TR 60444-4 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a PI-Network Part 4: Method for the 1988 IEC 0 Measurement of the Load Resonance Frequency FL, Load Resonance Resistance RL and the Calculation of Other Derived Values of Quartz Crystal Units, 10372 TR 60886 Investigations on Test Procedures for Ultrasonic Cleaners - Edition 1.0 1987 IEC 0 10373 TR 60890 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation - Edition 1987 IEC 0 2.0 10374 TR 60894 NULL 1987 IEC 0 10375 TS 60899 Sampling Rate and Source Encoding for Professional Digital Audio Recording - Edition 1.0 1987 IEC 0 10376 60489-5 Methods of measurement for radio equipment used in the mobile services Part 5: Receivers employing single-sideband 1987 IEC 0 techniques (R3E, H3E or J3E) - Edition 2.0 10377 60598-2-1 Luminaires Part 2: Particular Requirements Section One - Fixed General Purpose Luminaires Aendment 1 - Edition 1.0 1987 IEC 0 AMD 1 10378 60603-3 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 3: Two-Part Connectors for Printed Boards 1987 IEC 0 Having Contacts Spaced at 2.54 mm (0.100 in) Centres and Staggered Terminations at That Same Spacing - Edition 1.0 10379 60603-4 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 4: Two-Part Connectors for Printed Boards 1987 IEC 0 Having Contacts Spaced at 1.91 mm (0.075 in) Centres and Staggered Terminations at That Same Spacing - Edition 1.0 10380 60603-5 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part 1987 IEC 0 Connectors for Double-Sided Printed Boards with 2.54 mm (0.1 in) Spacing - Edition 1.0 10381 60603-6 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 6: Edge-Socket Connectors and Printed-Board 1987 IEC 0 Connectors with 2.54 mm (0.1 in) Contact Spacing for Single or Double-Sided Printed Boards of 1.6 mm (0.063 in) Nominal Thickness - Edition 10382 60379 Methods for measuring the performance of electric storage water-heaters for household purposes - Edition 3.0 1987 IEC 0 10383 60404-9 Magnetic Materials Part 9: Methods of Determination of the Geometrical Characteristics of Magnetic Steel Sheet and Strip 1987 IEC 0 - Edition 1.0 10384 60068-4 NULL 1987 IEC 0 10385 60050-604 NULL 1987 IEC 0 10386 60050-845 International Electrotechnical Vocabulary Chapter 845: Lighting - Edition 1.0 1987 IEC 0 10387 60098 Analogue Audio Disk Records and Reproducing Equipment - Edition 3.0 1987 IEC 0 10388 60104 Aluminium-Magnesium-Silicon Alloy Wire for Overhead Line Conductors - Edition 2.0 1987 IEC 0 10389 60169-1-1 Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods Section One - Electrical Tests and 1987 IEC 0 Measuring Procedures: Reflection Factor - Edition 1.0 10390 60169-1 Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods - Edition 2.0 1987 IEC 0 10391 60172 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires - Edition 4.0 1987 IEC 0 10392 60215 Safety requirements for radio transmitting equipment General requirements and terminology - Edition 4.0 1987 IEC 0 10393 60268-11 Sound System Equipment Part 11: Application of Connectors for the Interconnection of Sound System Components - 1987 IEC 0 Edition 2.0; Includes Amendment 1: 10/1989 and Amendment 2: 09/1991 10394 60268-12 Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use - Edition 2.0; Includes 1987 IEC 0 Amendment 1: 05/1991 and Amendment 2: 11/1994 10395 60268-2 Sound System Equipment Part 2: Explanation of General Terms and Calculation Methods - Edition 2.0; Includes 1987 IEC 0 Amendment 1: 05/1991 10396 60885-1 NULL 1987 IEC 0 10397 60885-2 Electrical test methods for electric cables Part 2: Partial discharge tests - Edition 1.0 1987 IEC 0 10398 60883 Measuring Method for Chrominance Signal-to-Random Noise Ratio for Video Tape Recorders - Edition 1.0 1987 IEC 0 10399 60888 Zinc-Coated Steel Wires for Stranded Conductors - Edition 1.0 1987 IEC 0 10400 60889 Hard-Drawn Aluminium Wire for Overhead Line Conductors - Edition 1.0 1987 IEC 0 10401 60897 Methods for the Determination of the Lightning Impulse Breakdown Voltage of Insulating Liquids - Edition 1.0 1987 IEC 0 10402 60918 PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for Insulation Displacement Termination - Edition 1.0; 1987 IEC 0 Includes Amendment 1: 06/1992 10403 60911 Measurements for Monitoring Adequate Cooling within the Core of Pressurized Light Water Reactors - Edition 1.0 1987 IEC 0 10404 60860 Radiation protection instrumentation Warning equipment for criticality accidents - Edition 2.0 1987 IEC 0 10405 60654-4 Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences - 1987 IEC 0 Edition 1.0 10406 60721-2-3 Classification of environmental conditions Part 2-3: Environmental conditions appearing in nature Air pressure - Edition 1987 IEC 0 2.0 10407 60721-2-7 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Fauna and Flora - 1987 IEC 0 Edition 1.0 10408 60721-3-6 Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their 1987 IEC 0 Severities Section 6: Ship Environment - Edition 1.0; Includes Corrigendum 1: 9/1987 10409 60748-3 Semiconductor Devices Integrated Circuits Part 3: Analogue Integrated Circuits - Edition 1.0; Includes Amendment 1: 1986 IEC 0 1991, Amendment 2: 1994, and Corrigendum: 06/1996 10410 60667-3-1 Specification for vulcanized fibre for electrical purposes. Part 3: Specifications for individual materials. Sheet 1: Flat sheets 1986 IEC 0 - Edition 1.0 10411 60856 Pre-Recorded Optical Reflective Videodisk System "Laser Vision" 50 Hz/625 Lines - PAL - Edition 1.0; Includes 1986 IEC 0 Amendment 1: 07/1991 and Amendment 2: 05/1997 10412 60857 Pre-Recorded Optical Reflective Videodisk System "Laser Vision" 60 Hz/525 Lines - M/NTSC - Edition 1.0; Includes 1986 IEC 0 Amendment 1: 07/1991 and Amendment 2: 04/1997 10413 60852-1 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Part 1: 1986 IEC 0 Transformers and inductors using YEI-1 laminations - Edition 1.0 10414 60864-1 Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment. 1986 IEC 0 Part 1: Interface standards for systems using dedicated interconnections - Edition 1.0; Includes Amendment 1: 05/1987 10415 60811-3-1 NULL 1986 IEC 0 CORR 1 10416 60811-1-4 NULL 1986 IEC 0 CORR 1 10417 60811-3-2 NULL 1986 IEC 0 CORR 1 10418 60811-1-2 NULL 1986 IEC 0 CORR 10419 60879 Performance and Construction of Electric Circulating Fans and Regulators - Edition 1.0; Includes Corrigendum: 1992 1986 IEC 0 10420 60244-10 Methods of measurement for radio transmitters. Part 10: Methods of measurement for television transmitters and 1986 IEC 0 transposers employing insertion test signals - Edition 1.0 10421 60136 Dimensions of Brushes and Brush-Holders for Electrical Machinery - Edition 2.0 1986 IEC 0 10422 60094-7 Magnetic Tape Sound Recording and Reproducing Systems - Part 7: Cassette for Commercial Tape Records and Domestic 1986 IEC 0 Use - Edition 1.0; Includes Amendment 1: 2/1996 10423 60094-4 Magnetic Tape Sound Recording and Reproducing Systems Part 4: Mechanical Magnetic Tape Properties - Edition 1.0; 1986 IEC 0 Includes Amendment 1: 7/1994 10424 60050-603 International Electrotechnical Vocabulary Chapter 603: Generation, Transmission and Distribution of Electricity - Power 1986 IEC 0 System Planning and Management - Edition 1.0; Includes Amendment 1: 1998 10425 60050-321 International Electrotechnical Vocabulary Chapter 321: Instrument Transformers - Edition 1.0 1986 IEC 0 10426 60068-2-7 Amendment 1 - Basic environmental testing procedures Part 2-7: Tests Test Ga and guidance: Acceleration, steady state - 1986 IEC 0 AMD 1 Edition 2.0 10427 60067E Fifth supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves - Edition 2.0 1986 IEC 0 10428 60581-7 High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 7: Loudspeakers - Edition 1.0 1986 IEC 0 10429 60581-10 High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 10: Headphones - Edition 1.0 1986 IEC 0 10430 60444-1 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network - Part 1: Basic Method for the 1986 IEC 0 Measurement of Resonance Frequency and Resonance Resistance of Quartz Crystal Units by Zero Phase Technique in a Pi- Network - Edition 2.0 10431 60510-1-4 Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems 1986 IEC 0 and combinations of sub-systems. Section Four: Measurements in the baseband - Edition 1.0 10432 60487-2-7 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1986 IEC 0 Section Seven - Radio transmitters - Edition 1.0 10433 60487-2-8 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1986 IEC 0 Section Eight - Radio receivers - Edition 1.0 10434 TR 60854 Methods of Measuring the Performance of Ultrasonic Pulse-Echo Diagnostic Equipment - Edition 1.0 1986 IEC 0 10435 TR 60882 Pre-Heat Requirements for Starterless Tubular Fluorescent Lamps - Edition 1.0 1986 IEC 0 10436 7 NULL 1985 IEC 0 10437 60329 Strip-Wound Cut Cores of Grain Oriented Silicon-Iron Alloy, Used for Electronic and Telecommunication Equipment - 1985 IEC 0 Edition 2.0 10438 60628 Gassing of Insulating Liquids under Electrical Stress and Ionization - Edition 2.0; Includes Corrigendum: 10/1986 1985 IEC 0 10439 60051-5 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 5: Special Requirements 1985 IEC 0 for Phase Meters, Power Factor Meters and Synchroscopes - Edition 4.0 10440 60050-601 International Electrotechnical Vocabulary - Chapter 601: Generation, Transmission and Distribution of Electricity - General 1985 IEC 0 - Edition 1.0; Includes Amendment 1: 1998 10441 60169-20 Radio-Frequency Connectors Part 20: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 2.08 mm (0.082 1985 IEC 0 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SSMC) - Edition 1.0 10442 60169-21 Radio-Frequency Connectors Part 21: Two Types of Radio-Frequency Connectors with Inner Diameter of Outer Conductor 1985 IEC 0 9.5 mm (0.374 in) with Different Versions of Screw Coupling - Characteristic Impedance 50 Ohms (Types SC-A and SC- B) - Edition 1.0; Includes 10443 60169-22 Radio-Frequency Connectors Part 22: R.F. Two-Pole Bayonet Coupled Connectors for Use with Shielded Balanced Cables 1985 IEC 0 Having Twin Inner Conductors (Type BNO) - Edition 1.0 10444 60094-6 Magnetic Tape Sound Recording and Reproducing Systems Part 6: Reel-to-Reel Systems - Edition 1.0 1985 IEC 0 10445 60118-9 Hearing Aids Part 9: Methods of Measurement of Characteristics of Hearing Aids with Bone Vibrator Output - Edition 1.0 1985 IEC 0 10446 60268-1 Sound System Equipment Part 1: General - Edition 2.0 1985 IEC 0 10447 60805 Guide for Commissioning, Operation and Maintenance of Storage Pumps and of Pump- Turbines Operating as Pumps - 1985 IEC 0 Edition 1.0 10448 60808 Complementary Instrumentation for Counting Ratemeters Characteristics and Test Methods - Edition 1.0 1985 IEC 0 10449 60811-1-2 NULL 1985 IEC 0 10450 60811-1-4 NULL 1985 IEC 0 10451 60811-3-1 NULL 1985 IEC 0 10452 60811-3-2 NULL 1985 IEC 0 10453 60853-1 Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 1985 IEC 0 18/30(36)kV - Edition 1.0 10454 60747-11 NULL 1985 IEC 0 10455 60747-3 Semiconductor devices Part 3: Discrete devices: Signal, switching and regulator diodes - Edition 2.0 1985 IEC 0 10456 60803 Recommended Dimensions for Hexagonal and Square Crimping-Die Cavities, Indentors, Gauges, Outer Conductor Crimp 1984 IEC 0 Sleeves and Centre Contact Crimp Barrels for R.F. Cables and Connectors - Edition 1.0; Includes Amendment 1: 11/1995 10457 60806 Determination of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube for Medical Diagnosis - 1984 IEC 0 Edition 1.0 10458 60120 Dimensions of Ball and Socket Couplings of String Insulator Units - Edition 3.0 1984 IEC 0 10459 60115-7 Fixed Resistors for Use in Electronic Equipment Part 7: Sectional Specification: Fixed Resistor Networks in Which Not All 1984 IEC 0 Resistors Are Individually Measurable - Edition 1.0; QC 400500 10460 60115-7-1 Fixed Resistors for Use in Electronic Equipment Part 7: Blank Detail Specification: Fixed Resistor Networks in Which Not 1984 IEC 0 All Resistors Are Individually Measurable Assessment Level E - Edition 1.0; QC 400501 10461 60183 Guidance for the selection of high-voltage A.C. cable systems - Edition 3.0 1984 IEC 0 10462 60051-2 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 2: Special Requirements 1984 IEC 0 for Ammeters and Voltmeters - Edition 4.0 10463 60051-3 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 3: Special Requirements 1984 IEC 0 for Wattmeters and Varmeters - Edition 4.0; Includes Amendment 1: 1994 10464 60051-4 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 4: Special Requirements 1984 IEC 0 for Frequency Meters - Edition 4.0 10465 60051-6 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 6: Special Requirements 1984 IEC 0 for Ohmmeters (Impedance Meters) and Conductance Meters - Edition 4.0 10466 60051-7 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 7: Special Requirements 1984 IEC 0 for Multi-Function Instruments - Edition 4.0 10467 60051-8 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 8: Special Requirements 1984 IEC 0 for Accessories - Edition 4.0 10468 60050-441 International Electrotechnical Vocabulary Chapter 441: Switchgear, Controlgear and Fuses - Edition 2.0; Includes 1984 IEC 0 Amendment 1: 07/2000 10469 60050-371 International Electrotechnical Vocabulary Chapter 371: Telecontrol - Includes Amendment 1: 1997 1984 IEC 0 10470 60034-11-2 NULL 1984 IEC 0 10471 60034-11-3 NULL 1984 IEC 0 10472 60554-3-5 Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 5: Special 1984 IEC 0 Papers - Edition 1.0 10473 60598-2-17 Luminaires Part 2-17: Particular requirements Luminaires for stage lighting, television and film studios (outdoor and 1984 IEC 0 indoor) - Edition 2.0 10474 60487-3-6 Methods of measurement for equipment used in terrestrial radio-relay systems Part 3: Simulated systems Section Six - 1984 IEC 0 Measurements for sound-programme transmission - Edition 1.0 10475 60487-2-3 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1984 IEC 0 Section Three - R.F. branching networks - Edition 1.0 10476 60487-2-4 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1984 IEC 0 Section Four - Frequency modulators - Edition 1.0 10477 60487-2-5 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1984 IEC 0 Section Five - Frequency demodulators - Edition 1.0 10478 60487-2-6 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1984 IEC 0 Section Six - Diversity, twin-path and hot stand-by equipment - Edition 1.0 10479 60487-1 Methods of measurement for equipment used in terrestrial radio-relay systems Part 1: Measurements common to sub- 1984 IEC 0 systems and simulated radio-relay systems - Edition 2.0 10480 60510-1-2 Methods of measurement for radio equipment used in satellite earth stations Part 1: Measurements common to sub-systems 1984 IEC 0 and combinations of sub-systems Section Two: Measurements in the r.f. range - Edition 1.0 10481 60455-2-2 Specification for solventless polymerisable resinous compounds used for electrical insulation Part 2: Methods of test Test 1984 IEC 0 methods for coating powders for electrical purposes - Edition 1.0; Includes Corrigendum 1: 08/1991 10482 60457-5 Rigid precision coaxial lines and their associated precision connectors Part 5: 50 Ohms 3.5 mm rigid precision coaxial line 1984 IEC 0 with provision for mounting connectors - Edition 1.0 10483 60384-15-1 Fixed Capacitors for Use in Electronic Equipment Part 15: Blank Detail Specification: Fixed Tantalum Capacitors with 1984 IEC 0 Non-Solid Electrolyte and Foil Electrode Assessment Level E - Edition 1.0 10484 60384-15-2 Fixed Capacitors for Use in Electronic Equipment Part 15: Blank Detail Specification: Fixed Tantalum Capacitors with 1984 IEC 0 Non-Solid Electrolyte and Porous Anode Assessment Level E - Edition 1.0 10485 60384-15-3 Fixed Capacitors for Use in Electronic Equipment Part 15: Blank Detail Specification: Fixed Tantalum Capacitors with 1984 IEC 0 Solid and Porous Anode Assessment Level E - Edition 1.0; Includes Amendment 1: 04/1992 10486 60372 Locking Devices for Ball and Socket Couplings of String Insulator Units: Dimensions and Tests - Edition 3.0; Includes 1984 IEC 0 Amendment 1: 1991 and Amendment 2: 05-2003 10487 TR 60797 Residual Strength of String Insulator Units of Glass or Ceramic Material for Overhead Lines After Mechanical Damage of 1984 IEC 0 the Dielectric - Edition 1.0 10488 TR 60778 Brush-Holders for Slip-Rings Group R - Type RA - Edition 1.0 1984 IEC 0 10489 TR 60782 Measurements of Ultrasonic Magnetostrictive Transducers First Edition - Edition 1.0 1984 IEC 0 10490 TR 60783 NULL 1984 IEC 0 10491 TR 60784 NULL 1984 IEC 0 10492 TR 60784(2 NULL 1984 IEC 0 10493 TR 60785 NULL 1984 IEC 0 10494 TR 60786 NULL 1984 IEC 0 10495 TS 60816 Guide on Methods of Measurement of Short Duration Transients on Low Voltage Power and Signal Lines - Edition 1.0 1984 IEC 0 10496 MISC IEC Handbook 1 - Letter Symbols including conventions and signs for electrical technology A Handbook for everyday use 1983 IEC 0 HANDB1 - Edition 1.0; Reprinted: 1984 10497 60371-3-3 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 3: Specification 1983 IEC 0 for Rigid Mica Materials for Heating Equipment - Edition 1.0 10498 60489-1 Methods of Measurement for Radio Equipment Used in the Mobile Services - Part 1: General Definitions and Standard 1983 IEC 0 Conditions of Measurement - Edition 2.0; Includes Amendment 1: 06/1996 and Amendment 2: 05/1999 10499 60554-3-2 Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Capacitor 1983 IEC 0 Paper - Edition 1.0 10500 60554-1 AMD Specification for Cellulosic Papers for Electrical Purposes Part 1: Definitions and General Requirements - Edition 1.0 1983 IEC 0 1 10501 60068-2-49 Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kc: Sulphur Dioxide Test for Contacts and 1983 IEC 0 Connections - Edition 1.0 10502 60068-2-13 Basic Environmental Testing Procedures Part 2: Tests Test M: Low Air Pressure - Edition 4.0 1983 IEC 0 10503 60068-2-7 Basic Environmental Testing Procedures Part 2: Tests - Test Ga and Guidance: Acceleration, Steady State - Edition 2.0 1983 IEC 0 10504 60050-605 International Electrotechnical Vocabulary Chapter 605: Generation, Transmission and Distribution of Electricity - 1983 IEC 0 Substations 10505 60050-602 International Electrotechnical Vocabulary Chapter 602: Generation, Transmission and Distribution of Electricity - 1983 IEC 0 Generation 10506 60050-881 Advance Edition of the International Electrotechnical Vocabulary Chapter 881: Radiology and Radiological Physics 1983 IEC 0 10507 60154-6 Flanges for Waveguides Part 6: Relevant Specifications for Flanges for Medium Flat Rectangular Waveguides - Edition 1.0 1983 IEC 0 10508 60169-10 Radio-Frequency Connectors Part 10: RF Coaxial Connectors with Inner Diameter of Outer Conductor 3 mm (0.12 in) with 1983 IEC 0 Snap-On Coupling - Characteristic Impedance 50 Ohms (Type SMB) - Edition 1.0; Includes Amendment 1: 1986 and Amendment 2: 1996 10509 60115-5-1 Fixed Resistors for Use in Electronic Equipment Part 5: Blank Detail Specification: Fixed Precision Resistors Assessment 1983 IEC 0 Level E - Edition 1.0 10510 60118-0 Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids - Edition 3.0 1983 IEC 0 10511 60115-6 Fixed Resistors for Use in Electronic Equipment Part 6: Sectional Specification: Fixed Resistor Networks with Individually 1983 IEC 0 Measurable Resistors First Edition; (Amendment 1-1987) (IECQ QC 400400) - Edition 1.0; Includes Amendment 1: 02/1987 lectronic equipment Part 6: Blank detail specification - Fixed resistor networks with individually 1983 IEC 0_أ Fixed resistors for use in 60115-6-1 10512 measurable resistors, all of equal value and equal d issi pation Assessment level E - Edition 1.0 10513 60115-6-2 NULL 1983 IEC 0 10514 60115-4-1 Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors Assessment 1983 IEC 0 Level E - Edition 1.0 10515 60118-5 Hearing Aids Part 5: Nipples for Insert Earphones - Edition 1.0 1983 IEC 0 10516 60118-2 NULL 1983 IEC 0 10517 60122-2 Quartz Crystal Units for Frequency Control and Selection Part 2: Guide to the Use of Quartz Crystal Units for Frequency 1983 IEC 0 Control and Selection - Edition 2.0 10518 60739 NULL 1983 IEC 0 10519 60744 Safety Logic Assemblies of Nuclear Power Plants Characteristics and Test Methods First Edition - Edition 1.0 1983 IEC 0 10520 60759 Standard Test Procedures for Semiconductor X-Ray Energy Spectrometers - Edition 1.0; Includes Amendment 1: 1991 1983 IEC 0 10521 60757 Code for Designation of Colours First Edition - Edition 1.0 1983 IEC 0 10522 60767 Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in) Magnetic Tape on Type Beta Format First Edition - 1983 IEC 0 Edition 1.0 10523 60772 Electrical Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations - Edition 1.0 1983 IEC 0 10524 60773 Test Methods and Apparatus for the Measurement of the Operational Characteristics of Brushes First Edition - Edition 1.0 1983 IEC 0 10525 60775 Real-Time BASIC for CAMAC - Edition 1.0 1983 IEC 0 10526 60654-3 Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences - Edition 1983 IEC 0 1.0 10527 60667-2 Specification for vulcanized fibre for electrical purposes. Part 2: Methods of test - Edition 1.0; Includes Amendment 1: 1982 IEC 0 02/1986 10528 60729 Multiple Controllers in a CAMAC Crate - Edition 1.0 1982 IEC 0 10529 60732 Measuring Methods for Cylinder Cores, Tube Cores and Screw Cores of Magnetic Oxides First Edition - Edition 1.0 1982 IEC 0 10530 60733 NULL 1982 IEC 0 10531 60115-2 Fixed resistors for use in electronic equipment Part 2: Sectional specification: Leaded fixed low power film resistors - 1982 IEC 0 Edition 3.0 10532 60115-4 Fixed Resistors for Use in Electronic Equipment Part 4: Sectional Specification: Fixed Power Resistors - Edition 2.0; 1982 IEC 0 Includes Amendment 1: 03/1993 10533 60115-2-1 Fixed Resistors for Use in Electronic Equipment Part 2: Blank Detail Specification: Fixed Low-Power Non-Wirewound 1982 IEC 0 Resistors Assessment Level E - Edition 1.0 10534 60115-5 Fixed Resistors for Use in Electronic Equipment Part 5: Sectional Specification: Fixed Precision Resistors - Edition 2.0 1982 IEC 0 10535 60154-1 Flanges for waveguides - Part 1: General requirements - Edition 3.0 1982 IEC 0 10536 60154-3 Flanges for Waveguides Part 3: Relevant Specifications for Flanges for Flat Rectangular Waveguides - Edition 2.0 1982 IEC 0 10537 60255-16 NULL 1982 IEC 0 10538 60263 Scales and Sizes for Plotting Frequency Characteristics and Polar Diagrams - Edition 3.0 1982 IEC 0 10539 60304 Standard Colours for Insulation for Low-Frequency Cables and Wires - Edition 3.0 1982 IEC 0 10540 60050-726 International Electrotechnical Vocabulary Chapter 726: Transmission Lines and Waveguides 1982 IEC 0 10541 60068-2-46 Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kd: Hydrogen Sulphide Test for Contacts and 1982 IEC 0 Connections - Edition 1.0 10542 60584-2 NULL 1982 IEC 0 10543 60598-2-7 Luminaires Part 2: Particular Requirements Section Seven - Portable Luminaires for Garden Use - Edition 1.0; Includes 1982 IEC 0 Amendment 1: 07/1987 and Amendment 2: 08/1994 10544 60558 Type C Helical Video Tape Recorders - Edition 1.0; Includes Amendment 1: 2/1987 and Amendment 2: 9/1993 1982 IEC 0 10545 60487-3-4 Methods of measurement for equipment used in terrestrial radio-relay systems Part 3: Simulated systems Section Four - 1982 IEC 0 Measurements for f.d.m. transmission - Edition 1.0 10546 60487-3-5 Methods of measurement for equipment used in terrestrial radio-relay systems Part 3: Simulated systems Section Five - 1982 IEC 0 Measurement of mutual interference - Edition 1.0 10547 60404-7 Magnetic Materials Part 7: Method of Measurement of the Coercivity of Magnetic Materials in an Open Magnetic Circuit - 1982 IEC 0 Edition 1.0 10548 60381-1 Analogue Signals for Process Control Systems Part 1: Direct Current Signals - Edition 2.0 1982 IEC 0 10549 60384-15 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid 1982 IEC 0 or solid electrolyte - Edition 2.0 10550 60347 Transverse Track Video Recorders - Edition 2.0 1982 IEC 0 10551 TR 60736 Testing Equipment for Electrical Energy Meters - Edition 1.0 1982 IEC 0 10552 60487-3-2 Methods of measurement for equipment used in terrestrial radio-relay systems Part 3: Simulated systems Section Two - 1981 IEC 0 Measurements in the baseband - Edition 1.0 10553 60487-3-3 Methods of measurement for equipment used in terrestrial radio-relay systems Part 3: Simulated systems Section Three - 1981 IEC 0 Measurements for monochrome and colour television transmission - Edition 1.0 10554 60487-2-1 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1981 IEC 0 Section One - General - Edition 1.0 10555 60487-2-2 Methods of measurement for equipment used in terrestrial radio-relay systems Part 2: Measurements for sub-systems 1981 IEC 0 Section Two - Stand-by channel switching equipment - Edition 1.0 10556 60510-3-1 Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on 1981 IEC 0 combinations of sub-systems. Section One: General - Edition 1.0 10557 60581-5 High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 5: Microphones - Edition 1.0 1981 IEC 0 10558 60598-2-19 Luminaires Part 2: Particular Requirements Section Nineteen - Air-Handling Luminaires (Safety Requirements) - Edition 1981 IEC 0 1.0; Includes Amendment 1: 1987 and Amendment 2: 1997 10559 60068-2-11 Basic Environmental Testing Procedures Part 2: Tests- Test Ka: Salt Mist - Edition 3.0 1981 IEC 0 10560 60055-2 Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and 1981 IEC 0 Excluding Gas-Pressure and Oil-Filled Cables) Part 2: General and Construction Requirements - Edition 1.0; Includes Amendment 1: 10/1989 and A 10561 60094-1 Magnetic Tape Sound Recording and Reproducing Systems Part 1: General Conditions and Requirements - Edition 4.0; 1981 IEC 0 Includes Amendment 1: 07/1994 10562 60679-2 Quartz crystal controlled oscillators. Part 2: Guide to the use of quartz crystal controlled oscillators - Edition 1.0 1981 IEC 0 10563 60713 Subroutines for CAMAC - Edition 1.0 1981 IEC 0 10564 60715 Dimensions of Low-Voltage Switchgear and Controlgear Standardized Mounting on Rails for Mechanical Support of 1981 IEC 0 Electrical Devices in Switchgear and Controlgear Installations - Edition 1.0 10565 60720 Characteristics of Line Post Insulators - Edition 1.0 1981 IEC 0 10566 TR 60663 Planning of (Single-Sideband) Power Line Carrier Systems - Edition 1.0 1980 IEC 0 10567 TR 60668 Dimensions of Panel Areas and Cut-outs for Panel and Rack-Mounted Industrial-Process Measurement and Control 1980 IEC 0 Instruments First Edition - Edition 1.0 10568 GUIDE 103 Guide on Dimensional Co-Ordination - Edition 1.0 1980 IEC 0 10569 60664 NULL 1980 IEC 0 10570 60665 A.C. Electric Ventilating Fans and Regulators for Household and Similar Purposes - Edition 1.0 1980 IEC 0 10571 60667-1 Specification for vulcanized fibre for electrical purposes. Part 1: Definitions and general requirements - Edition 1.0 1980 IEC 0 10572 60674-1 Specification for plastic films for electrical purposes Part 1: Definitions and general requirements - Edition 1.0 1980 IEC 0 10573 60677 Block Transfers in CAMAC Systems - Edition 1.0 1980 IEC 0 10574 60682 Standard Method of Measuring the Pinch Temperature of Quartz-Tungsten-Halogen Lamps - Edition 1.0; Includes 1980 IEC 0 Amendment 1: 1987 and Amendment 2: 1997 10575 60255-12 Electrical Relays Part 12: Directional Relays and Power Relays with Two Input Energizing Quantities - Edition 1.0 1980 IEC 0 10576 60255-13 Electrical Relays Part 13: Biased (Percentage) Differential Relays - Edition 1.0 1980 IEC 0 10577 60093 NULL 1980 IEC 0 10578 60141-4 Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 4: Oil-Impregnated Paper-Insulated High Pressure 1980 IEC 0 Oil-Filled Pipe-Type Cables and Accessories for Alternating Voltages up to and Including 400 kV - Edition 1.0; Includes Amendment 1: 10 10579 60169-17 Radio-Frequency Connectors Part 17: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 6,5 mm (0,256 in) 1980 IEC 0 with Screw Coupling - Characteristic Impedance 50 Ohms (Type TNC) - Edition 1.0; Includes Amendment 1: 05/1993; 10580 60154-2 Flanges for waveguides Part 2: Relevant specifications for flanges for ordinary rectangular waveguides - Edition 3.0 1980 IEC 0 10581 60154-2 AMD NULL 1980 IEC 0 1 10582 60154-2 CORR NULL 1980 IEC 0 1 10583 60050-431 International Electrotechnical Vocabulary Chapter 431: Transductors - Edition 1.0 1980 IEC 0 10584 60068-2-45 Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents - Edition 1980 IEC 0 1.0; Includes Erratum 1: 08/1981 10585 60068-2-45 Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents - Edition 1980 IEC 0 AMD 1 1.0 10586 60092-301 Electrical Installations in Ships Part 301: Equipment - Generators and Motors - Edition 3.0 1980 IEC 0 10587 60092-304 Electrical Installations in Ships Part 304: Equipment - Semiconductor Convertors - Edition 3.0 1980 IEC 0 10588 60092-304 Electrical Installations in Ships Part 304: Equipment - Semiconductor Convertors - Edition 3.0 1980 IEC 0 AMD 1 10589 60092-305 Electrical Installations in Ships Part 305: Equipment - Accumulator (Storage) Batteries - Edition 3.0 1980 IEC 0 10590 60092-307 Electrical Installations in Ships Part 307: Equipment - Heating and Cooking Appliances - Edition 3.0 1980 IEC 0 10591 60092-303 Electrical Installations in Ships Part 303: Equipment - Transformers for Power and Lighting - Edition 3.0 1980 IEC 0 10592 60092-401 Electrical Installations in Ships Part 401: Installation and Test of Completed Installation - Edition 3.0 1980 IEC 0 10593 60554-3-3 Specification for Cellulosic Papers for Electrical Purposes Part 3: Specification for Individual Materials Sheet 3: Crepe 1980 IEC 0 Paper - Edition 1.0 10594 60602 Type B Helical Video Recorders - Edition 1.0; Includes Amendment 1: 02/1987 1980 IEC 0 10595 60523 AMD 1 NULL 1980 IEC 0 CORR 1 10596 60457-3 Rigid precision coaxial lines and their associated precision connectors Part 3: 14 mm rigid precision coaxial line and 1980 IEC 0 associated hermaphroditic precision coaxial connector - Characteristic impedances 50 Ohms and 75 Ohms - Edition 2.0 10597 60444-2 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a PI-Network Part 2: Phase Offset Method for 1980 IEC 0 Measurement of Motional Capacitance of Quartz Crystal Units - Edition 1.0 10598 60510-1-3 Methods of measurement for radio equipment used in satellite earth stations Part 1: Measurements common to sub-systems 1980 IEC 0 and combinations of sub-systems Section Three - Measurements in the i.f. range - Edition 1.0; Includes Amendment 1: 10/1988 10599 60510-1A First Supplement to Publication 60510-1 (1975) Methods of measurement for radio equipment used in satellite earth 1980 IEC 0 stations Part 1: General - Edition 1.0 10600 60510-3-2 Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on 1980 IEC 0 combinations of sub-systems. Section Two: Measurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range - Edition 10601 60471 Dimensions of Clevis and Tongue Couplings of String Insulator Units - Edition 2.0; Includes Amendment 1: 7/1980 1980 IEC 0 10602 60418-3A First supplement to Publication 60418-3 (1976) Variable capacitors Part 3: Type specification for variable trimmer 1980 IEC 0 capacitors Type B Blank detail specification - Edition 1.0 10603 60418-2A First supplement to Publication 60418-2 (1976) Variable capacitors Part 2: Type specification for variable tuning capacitors 1980 IEC 0 Type A Blank detail specification for variable tuning capacitors Type A - Edition 1.0 10604 60418-2B Second supplement to Publication 60418-2 (1976) Variable capacitors Part 2: Type specification for variable tuning 1980 IEC 0 capacitors Type A - Blank detail specification for variable tuning capacitors Type A fitted with integral pre-set capacitors Type C - Editio 10605 60418-4A First supplement to Publication 60418-4 (1976) Variable capacitors Part 4: Type specification for variable pre-set 1980 IEC 0 capacitors Type C Blank detail specification - Edition 1.0 10606 60636 Flexible Waveguide Assembly Performance First Edition - Edition 1.0 1979 IEC 0 10607 60588-4 Askarels for Transformers and Capacitors Part 4: Guide for Maintenance of Transformer Askarel in Equipment - Edition 1979 IEC 0 1.0 10608 60588-5 Askarels for Transformers and Capacitors Part 5: Screening Test for Compatibility of Materials and Transformer Askarels - 1979 IEC 0 Edition 1.0 10609 60588-6 Askarels for Transformers and Capacitors Part 6: Screening Test for Effects of Materials on Capacitor Askarels - Edition 1979 IEC 0 1.0 10610 60598-2-1 Luminaires Part 2: Particular Requirements Section One - Fixed General Purpose Luminaires - Edition 1.0 1979 IEC 0 10611 60600 Equipment for Minehead Assay and Shorting Radioactive Ores in Containers - Edition 1.0 1979 IEC 0 10612 60554-1 ERTA NULL 1979 IEC 0 10613 60554-3-1 Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: General 1979 IEC 0 Purpose Electrical Paper - Edition 1.0 10614 60554-3-4 Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 4: 1979 IEC 0 Electrolytic Capacitor Paper - Edition 1.0 10615 60169-15 Radio-Frequency Connectors Part 15: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 4.13 mm (0.163 1979 IEC 0 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SMA) - Edition 1.0 10616 60169-12 Radio-Frequency Connectors Part 12: R.F. Coaxial Connectors with Screw Coupling, Unmatched (Type UHF) - Edition 1.0 1979 IEC 0 10617 60094-3 Magnetic Tape Sound Recording and Reproducing Systems Part 3: Methods of Measuring the Characteristics of Recording 1979 IEC 0 and Reproducing Equipment for Sound on Magnetic Tape - Edition 1.0; Incorporates Amendment 1: 12/1980; Includes Amendment 2:01/1988; Amendm 10618 60244-7 Methods of measurement for radio transmitters. Part 7: Cabinet radiation at frequencies above 1 GHz - Edition 1.0; 1979 IEC 0 Supplement A: 01-1980 10619 60642 Piezoelectric Ceramic Resonators and Resonator Units for Frequency Control and Selection Chapter I: Standard Values and 1979 IEC 0 Conditions Chapter II: Measuring and Test Conditions - Edition 1.0; Includes Amendment 1: 09/1992 10620 60647 NULL 1979 IEC 0 10621 60654-2 Operating conditions for industrial-process measurement and control equipment. Part 2: Power - Edition 1.0 1979 IEC 0 10622 60657 Non-Ionizing Radiation Hazards in the Frequency Range from 10 MHz to 300 000 MHz - Edition 1.0 1979 IEC 0 10623 TR 60638 Criteria for Assessing and Coding of the Commutation of Rotating Electrical Machines for Traction - Edition 1.0 1979 IEC 0 10624 TR 60648 Method of Test for Coefficients of Friction of Plastic Film and Sheeting for Use as Electrical Insulation First Edition - 1979 IEC 0 Edition 1.0 10625 TR 60616 Terminal and Tapping Markings for Power Transformers - Edition 1.0 1978 IEC 0 10626 60050 CHAP NULL 1978 IEC 0 131 10627 60151-28 Measurements of the Electrical Properties of Electronic Tubes Part 28: Methods of Measurement of Colour Television 1978 IEC 0 Picture Tubes - Edition 1.0 10628 60169-9 Radio-Frequency Connectors Part 9: RF Coaxial Connectors with Inner Diameter of Outer Conductor 3 mm (0.12 in) with 1978 IEC 0 Screw Coupling - Characteristic Impedance 50 Ohms (Type SMC) - Edition 1.0; Includes Amendment 1: 1996 10629 60588-2 Askarels for Transformers and Capacitors Part 2: Test Methods - Edition 1.0 1978 IEC 0 10630 60590 CORR 1 Determination of the Aromatic Hydrocarbon Content of New Mineral Insulating Oils - Edition 1.0 1978 IEC 0 10631 60615 Terminology for Microwave Apparatus - Edition 1.0 1978 IEC 0 10632 60618 Inductive Voltage Dividers - Edition 1.0; Includes Amendment 1: 09/1981 and Amendment 2: 10/1997 1978 IEC 0 10633 60624 Expression of the Performance of Pulse Generators - Edition 1.0 1978 IEC 0 10634 60635 Toroidal Strip-Wound Cores Made of Magnetically Soft Material - Edition 1.0; Includes Amendment 1: 1997 1978 IEC 0 10635 60510-2-1 Methods of measurement for radio equipment used in satellite earth stations. Part 2: Measurements for sub-systems. 1978 IEC 0 Section One: General - Section Two: Antenna (including feed network) - Edition 1.0; Includes Amendment 1: 12/1989 10636 60457-4 Rigid precision coaxial lines and their associated precision connectors Part 4: 21 mm rigid precision coaxial line and 1978 IEC 0 associated hermaphroditic precision coaxial connector Characteristic impedance 50 Ohms (Type 9/21) - Characteristic impedance 75 Ohms (T 10637 60526 High-Voltage Cable Plug and Socket Connections for Medical X-Ray Equipment - Edition 2.0 1978 IEC 0 10638 60381-2 Analogue Signals for Process Control Systems Part 2: Direct Voltage Signals - Edition 1.0 1978 IEC 0 10639 60377-2 Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 2: 1977 IEC 0 Resonance Methods - Edition 1.0 10640 60554-1 Specification for Cellulosic Papers for Electrical Purposes Part 1: Definitions and General Requirements - Edition 1.0 1977 IEC 0 10641 60564 D.C. Bridges for Measuring Resistance - Edition 1.0; Includes Amendment 1: 1981 and Amendment 2: 1997 1977 IEC 0 10642 60560 Definitions and Terminology of Brush-Holders for Electrical Machines - Edition 1.0 1977 IEC 0 10643 60581-1 High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 1: General - Edition 1.0 1977 IEC 0 10644 60535 NULL 1977 IEC 0 10645 60588-3 Askarels for Transformers and Capacitors Part 3: Specifications for New Askarels - Edition 1.0 1977 IEC 0 10646 60589 Methods of Test for the Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids - 1977 IEC 0 Edition 1.0; Includes Corrigendum: 6/1978 10647 60590 Determination of the Aromatic Hydrocarbon Content of New Mineral Insulating Oils - Edition 1.0; Includes Corrigendum: 1977 IEC 0 7/1978 10648 60588-1 Askarels for Transformers and Capacitors Part 1: General - Edition 1.0 1977 IEC 0 10649 60169-11 Radio-Frequency Connectors Part 11: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 9.5 mm (0.374 in) 1977 IEC 0 with Screw Coupling-Characteristic Impedance 50 Ohms (Type 4.1/9.5) - Edition 1.0 10650 60231E Fifth supplement to Publication 60231 (1967) General principles of nuclear reactor instrumentation Principles of 1977 IEC 0 instrumentation of high temperature indirect cycle gas-cooled power reactors (HTGR) - Edition 1.0 10651 60231F Sixth supplement to Publication 60231 (1967) General principles of nuclear reactor instrumentation Steam generating, 1977 IEC 0 direct cycle, heavy-water moderated reactors - Edition 1.0 10652 60231G Seventh supplement to Publication 60231 (1967) General principles of nuclear reactor instrumentation Liquid-metal cooled 1977 IEC 0 fast reactors - Edition 1.0 10653 60268-9 Sound System Equipment Part 9: Artificial Reverberation, Time Delay and Frequency Shift Equipment - Edition 1.0 1977 IEC 0 10654 60067D Fourth supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves - Edition 2.0 1977 IEC 0 10655 TR 60575 Thermal-Mechanical Performance Test and Mechanical Performance Test on String Insulator Units First Edition - Edition 1977 IEC 0 1.0 10656 60068-3-2(2 NULL 1976 IEC 0 10657 60068-2-40(2 NULL 1976 IEC 0 10658 60068-2-41(2 NULL 1976 IEC 0 10659 60068-2-39(2 NULL 1976 IEC 0 10660 60244-6(2 NULL 1976 IEC 0 10661 60235-2D(2 NULL 1976 IEC 0 10662 60235-2E(2 NULL 1976 IEC 0 10663 60235-2C(2 NULL 1976 IEC 0 10664 60130-8(2 NULL 1976 IEC 0 10665 60130-16(2 NULL 1976 IEC 0 10666 60130-12(2 NULL 1976 IEC 0 10667 60169-13 Radio Frequency Connectors Part 13: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 5.6 mm (0.22 in) - 1976 IEC 0 Characteristic Impedance 75 Ohms (Type 1.6/5.6) - Characteristic Impedance 50 Ohms (Type 1.8/5.6) with Similar Mating Dimensions - Editio 10668 60562(2 NULL 1976 IEC 0 10669 60545(2 NULL 1976 IEC 0 10670 60483(2 NULL 1976 IEC 0 10671 60394-3-1(2 NULL 1976 IEC 0 10672 60418-4(2 NULL 1976 IEC 0 10673 60418-2(2 NULL 1976 IEC 0 10674 60418-3 Variable Capacitors Part 3: Type Specification for Variable Trimmer Capacitors Type B Blank Detail Specification - 1976 IEC 0 Edition 1.0 10675 60418-2 Variable Capacitors Part 2: Type Specification for Variable Tuning Capacitors Type A - Edition 1.0; Includes Amendment 1975 IEC 0 1: 11/1981 10676 60418-4 Variable Capacitors Part 4: Type Specification for Variable Pre-Set Capacitors Type C Blank Detail Specification - Edition 1975 IEC 0 1.0 10677 60394-3-1 Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Oleoresinous Varnish- 1975 IEC 0 Cotton Base, OR/C - Edition 1.0 10678 60496 Methods for Measuring Performance of Electric Warming Plates for Household and Similar Purposes - Edition 1.0; 1975 IEC 0 Includes Amendment 1: 1977 and Amendment 2: 1992 10679 60498 High-Voltage Coaxial Connectors Used in Nuclear Instrumentation - Edition 1.0 1975 IEC 0 10680 60508 Methods for Measuring the Performance of Electric Ironing Machines for Household and Similar Purposes - Edition 1.0 1975 IEC 0 10681 60510-1 Methods of measurement for radio equipment used in satellite earth stations Part 1: General - Edition 1.0 1975 IEC 0 10682 60483 Guide to Dynamic Measurements of Piezoelectric Ceramics with High Electromechanical Coupling - Edition 1.0 1975 IEC 0 10683 60487-3 Methods of measurement for equipment used in terrestrial radio-relay systems Part 3: Simulated systems - Edition 1.0 1975 IEC 0 10684 60523 Direct-current potentiometers - Edition 1.0; Includes Amendment 1: 12/1979, Amendment 2: 10/1997, and Corrigenda 1: 1975 IEC 0 12/1980 10685 60524 Direct-Current Resistive Volt Ratio Boxes - Edition 1.0; Includes Amendment 1: 1981 and Amendment 2: 1997 1975 IEC 0 10686 60528 Expression of Performance of Air Quality Infra-Red Analyzers - Edition 1.0 1975 IEC 0 10687 60530 Methods for Measuring Performance of Electric Kettles and Jugs for Household and Similar Use - Edition 1.0; Includes 1975 IEC 0 Amendment 1: 1992 and Amendment 2: 05/2004 10688 60545 Guide for Commissioning, Operation and Maintenance of Hydraulic Turbines - Edition 1.0 1975 IEC 0 10689 60562 Measurements of Incidental Ionizing Radiation from Electronic Tubes - Edition 1.0 1975 IEC 0 10690 60151-14 Measurements of the Electrical Properties of Electronic Tubes Part 14: Methods of Measurement of Radar and 1975 IEC 0 Oscilloscope Cathode-Ray Tubes - Edition 2.0 10691 60169-7 Radio-Frequency Connectors Part 7: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 9,5 mm (0.374 in) 1975 IEC 0 with Bayonet Lock - Characteristic Impedance 50 Ohms (Type C) - Edition 1.0; Includes Amendment 1: 08/1993 10692 60130-12 Connectors for Frequencies Below 3 MHz Part 12: Link and Test Connectors - Edition 2.0 1975 IEC 0 10693 60130-16 NULL 1975 IEC 0 10694 60130-8 NULL 1975 IEC 0 10695 60231D Fourth supplement to Publication 60231 (1967) General principles of nuclear reactor instrumentation Principles of 1975 IEC 0 instrumentation for pressurized water reactors - Edition 1.0 10696 60235-2B Second supplement to Publication 60235-2 (1972) Measurement of the electrical properties of microwave tubes Part 2: 1975 IEC 0 General measurements - Edition 1.0 10697 60235-2C Third supplement to Publication 60235-2 (1972) Measurement of the electrical properties of microwave tubes Part 2: 1975 IEC 0 General measurements - Edition 1.0 10698 60235-9 Measurement of the Electrical Properties of Microwave Tubes Part 9: Crossed-Field Amplifier Tubes - Edition 1.0 1975 IEC 0 10699 60235-4A First supplement to Publication 60235-4 (1972) Measurement of the electrical properties of microwave tubes Part 4: 1975 IEC 0 Magnetrons Clause 4: Voltage tunable magnetron - Edition 1.0 10700 60235-2E Fifth supplement to Publication 60235-2 (1972) Measurement of the electrical properties of microwave tubes Part 2: 1975 IEC 0 General measurements Chapter VI: Methods of measuring the effects of non-linearity - Edition 1.0 10701 60235-1A First supplement to Publication 60235-1 (1972) Measurement of the electrical properties of microwave tubes Part 1: 1975 IEC 0 Terminology - Edition 2.0 10702 60235-2D Fourth supplement to Publication 60235-2 (1972) Measurement of the electrical properties of microwave tubes Part 2: 1975 IEC 0 General measurements - Edition 1.0 10703 60244-6 Methods of measurement for radio transmitters. Part 6: Cabinet radiation at frequencies between 130 kHz and 1 GHz - 1975 IEC 0 Edition 1.0 10704 60068-2-39 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with 1975 IEC 0 low air pressure tests - Edition 2.0 10705 60068-2-41 Basic Environmental Testing Procedures Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests - Edition 1975 IEC 0 1.0 10706 60068-2-40 Basic Environmental Testing Procedures Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests - Edition 1.0 1975 IEC 0 10707 60068-3-2 NULL 1975 IEC 0 10708 60034-2A Rotating electrical machines Part 2: Methods for determining losses and efficiency of rotating electrical machinery from 1974 IEC 0 tests (excluding machines for traction vehicles) Measurement of losses by the calorimetric method - Edition 1.0; First Supplment to pu 10709 60050-531 International Electrotechnical Vocabulary Chapter 531: Electronic Tubes - Edition 1.0 1974 IEC 0 10710 60244-2 AMD Amendment 1 Methods of measurement for radio transmitters Part 2: Bandwidth, out-of-band power and power of non- 1974 IEC 0 1 essential oscillations - Edition 1.0 10711 60235-8A First supplement to Publication 60235-8 (1972) Measurement of the electrical properties of microwave tubes Part 8: 1974 IEC 0 Backward-wavw oscillator tubes - "O" type - Edition 1.0 10712 60236 Methods for the Designation of Electrostatic Deflecting Electrodes of Cathode-Ray Tubes - Edition 2.0 1974 IEC 0 10713 60235-2A First supplement to Publication 60235-2 (1972) Measurement of the electrical properties of microwave tubes Part 2: 1974 IEC 0 General measurements Chapter V: Methods of measuring parasitic noise - Edition 1.0 10714 60231C Third supplement to Publication 60231 (1967) General principles of nuclear reactor instrumentation Instrumentation of gas- 1974 IEC 0 cooled graphite-moderated reactors - Edition 1.0 10715 60153-2 Hollow metallic waveguides Part 2: Relevant specifications for ordinary rectangular waveguides - Edition 3.0 1974 IEC 0 10716 60151-27 Measurements of the Electrical Properties of Electronic Tubes Part 27: Methods of Measurement for Intermodulation 1974 IEC 0 Products in Transmitting Tubes - Edition 1.0 10717 60154-7 Flanges for Waveguides Part 7: Relevant Specifications for Flanges for Square Waveguides - Edition 1.0 1974 IEC 0 10718 60441 Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen - Edition 1.0 1974 IEC 0 10719 60457-1 Rigid precision coaxial lines and their associated precision connectors Part 1: General requirements and measuring methods 1974 IEC 0 - Edition 1.0 10720 60457-2 Rigid precision coaxial lines and their associated precision connectors Part 2: 50 Ohm 7 mm rigid precision coaxial line and 1974 IEC 0 associated hermaphroditic precision coaxial connector - Edition 1.0 10721 60468 Method of Measurement of Resistivity of Metallic Materials - Edition 1.0 1974 IEC 0 10722 60477 Laboratory d.c. Resistors - Edition 1.0; Includes Amendment 1: 1997 1974 IEC 0 10723 60481 Coupling Devices for Power Line Carrier Systems - Edition 1.0 1974 IEC 0 10724 60500 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz - Edition 2.0 1974 IEC 0 10725 60418-1 Variable Capacitors Part 1: Terms and Methods of Test - Edition 1.0; Includes Amendment 1: 04/1976; Amendment 2: 1974 IEC 0 11/1981 10726 60410 NULL 1973 IEC 0 10727 60377-1 Recommended Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 1973 IEC 0 300 MHz Part 1: General - Edition 1.0 10728 60428 Standard cells - Edition 1.0 1973 IEC 0 10729 60434 Aircraft electrical filament lamps - Edition 1.0; Includes Amendment 1: 08/1981 and Amendment 2: 12/1984 1973 IEC 0 10730 60449 NULL 1973 IEC 0 10731 60153-4 Hollow Metallic Waveguides Part 4: Relevant Specifications for Circular Waveguides - Edition 2.0 1973 IEC 0 10732 60244-4 Methods of measurement for radio transmitters. Part 4: Amplitude/frequency characteristics and non-linearity distortion in 1973 IEC 0 transmitters for radiotelephony and sound broadcasting - Edition 1.0; Supplement A: 01-1976 10733 60244-2A Amendment 1 First supplement to Publication 60244-2 (1969) Methods of measurement for radio transmitters Part 2: 1973 IEC 0 AMD 1 Bandwidth, out-of-band power and power of non-essential oscillations Appendices - Edition 1.0 10734 60268-8 Sound System Equipment Part 8: Automatic Gain Control Devices - Edition 1.0 1973 IEC 0 10735 60050-691 International Electrotechnical Vocabulary Chapter 691: Tariffs for Electricity - Edition 1.0 1973 IEC 0 10736 60231B Second supplement to Publication 60231 (1967) General principles of nuclear reactor instrumentation Principles of 1972 IEC 0 instrumentation of direct cycle boiling water power reactors - Edition 1.0 10737 60235-2 Measurement of the Electrical Properties of Microwave Tubes Part 2: General Measurements - Edition 1.0 1972 IEC 0 10738 60235-1 Measurement of the Electrical Properties of Microwave Tubes Part 1: Terminology - Edition 2.0 1972 IEC 0 10739 60235-3 Measurement of the Electrical Properties of Microwave Tubes Part 3: Disk Seal Tubes - Edition 1.0 1972 IEC 0 10740 60235-4 Measurement of the Electrical Properties of Microwave Tubes Part 4: Magnetrons Clause 4: Voltage Tunable Magnetron - 1972 IEC 0 Edition 1.0 10741 60235-5 Measurement of the Electrical Properties of Microwave Tubes Part 5: Low-Power Oscillator Klystrons - Edition 1.0 1972 IEC 0 10742 60235-6 Measurement of the Electrical Properties of Microwave Tubes Part 6: High-Power Klystrons - Edition 1.0 1972 IEC 0 10743 60235-7 Measurement of the Electrical Properties of Microwave Tubes Part 7: Gas-Filled Microwave Switching Devices - Edition 1972 IEC 0 1.0 10744 60235-8 Measurement of the Electrical Properties of Microwave Tubes Part 8: Backward-Wave Oscillator Tubes - "O" Type - 1972 IEC 0 Edition 1.0 10745 60244-3 Methods of measurement for radio transmitters. Part 3: Wanted and unwanted modulation - Edition 1.0; Supplement A: 01- 1972 IEC 0 1971; Supplement B: 01-1972 10746 60153-7 Hollow Metallic Waveguides Part 7: Relevant Specifications for Square Waveguides - Edition 1.0 1972 IEC 0 10747 60386 Method of measurement of speed fluctuations in sound recording and reproducing equipment - Edition 1.0; Includes 1972 IEC 0 Amendment 1: 03/1988 10748 60392 Guide for the drafting of specifications for microwave ferrites - Edition 1.0 1972 IEC 0 10749 60394-1 Varnished Fabrics for Electrical Purposes Part 1: Definitions and General Requirements - Edition 1.0 1972 IEC 0 10750 60394-2 Varnished Fabrics for Electrical Purposes Part 2: Methods of Test - Edition 1.0 1972 IEC 0 10751 60413 Test procedures for determining physical properties of brush materials for electrical machines - Edition 1.0 1972 IEC 0 10752 60339-1 General Purpose Rigid Coaxial Transmission Lines and Their Associated Flange Connectors Part 1: General Requirements 1971 IEC 0 and Measuring Methods - Edition 1.0 10753 60345 Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures - Edition 1.0 1971 IEC 0 10754 60356 Dimensions for Commutators and Slip-Rings - Edition 1.0 1971 IEC 0 10755 60370 Test Procedure for Thermal Endurance of Insulating Varnishes - Electric Strength Method - Edition 1.0 1971 IEC 0 10756 60374 Guide for choosing modular dimensions for waveguide components - Edition 1.0 1971 IEC 0 10757 60130-7 NULL 1971 IEC 0 10758 60130-10 Connectors for Frequencies Below 3 MHz Part 10: Connectors for Coupling an External Low-Voltage Power Supply to 1971 IEC 0 Portable Entertainment Equipment - Edition 1.0 10759 60169-6 Radio-Frequency Connectors Part 6: R.F. Coaxial Connectors for Cables 96 IEC 75-17 and Larger - Edition 1.0 1971 IEC 0 10760 60151-24 Measurements of the Electrical Properties of Electronic Tubes Part 24: Methods of Measurement of Cathode-Ray Charge- 1971 IEC 0 Storage Tubes - Edition 1.0 10761 60151-25 Measurements of the Electrical Properties of Electronic Tubes Part 25: Methods of Measurement of Geiger-Muller Counter 1971 IEC 0 Tubes - Edition 1.0 10762 60151-26 Measurements of the Electrical Properties of Electronic Tubes Part 26: Methods of Measurement for Camera Tubes - 1971 IEC 0 Edition 1.0 10763 60306-4 Measurement of Photosensitive Devices Part 4: Methods of Measurement for Photomultipliers - Edition 1.0 1971 IEC 0 10764 60268-6 Sound System Equipment Part 6: Auxiliary Passive Elements - Edition 1.0 1971 IEC 0 10765 60067C Third supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves - Edition 2.0 1970 IEC 0 10766 60306-3 Measurement of Photosensitive Devices Part 3: Methods of Measurement of Photoconductive Cells for Use in the Visible 1970 IEC 0 Spectrum - Edition 1.0 10767 60151-22 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 22: Methods of Measurement for Cold 1970 IEC 0 Cathode Counting and Indicator Tubes - Edition 1.0 10768 60151-23 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 23: Methods of Measurement of Vacuum 1970 IEC 0 Pulse Modulator Tubes and Valves - Edition 1.0 10769 60169-5 Radio-Frequency Connectors Part 5: R.F. Coaxial Connectors for Cables 96 IEC 50-17 and Larger - Edition 1.0; Includes 1970 IEC 0 Corrigendum: 02/1971 10770 60130-4A NULL 1970 IEC 0 10771 60338 Telemetering for Consumption and Demand - Edition 1.0 1970 IEC 0 10772 60151-19 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 19: Methods of Measurement on Corona 1969 IEC 0 Stabilizers - Edition 1.0 10773 60151-17 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 17: Methods of Measurement of Gasfilled 1969 IEC 0 Tubes and Valves - Edition 2.0 10774 60151-20 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 20: Methods of Measurement of Thyratron 1969 IEC 0 Pulse Modulators - Edition 1.0 10775 60151-21 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 21: Methods of Measurement of Cross- 1969 IEC 0 Modulation in Electronic Tubes and Valves - Edition 1.0 10776 60154-4 Flanges for waveguides Part 4: Relevant specifications for flanges for circular waveguides - Edition 2.0 1969 IEC 0 10777 60306-1 Measurement of Photosensitive Devices Part 1: Basic Recommendations - Edition 1.0 1969 IEC 0 10778 60306-2 Measurement of Photosensitive Devices Part 2: Methods of Measurement of Phototubes - Edition 1.0 1969 IEC 0 10779 60250 Recommended Methods for the Determination of the Permittivity and Dielectric Dissipation Factor of Electrical Insulating 1969 IEC 0 Materials at Power, Audio and Radio Frequencies Including Metre Wavelengths - Edition 1.0 10780 60244-2 Methods of Measurement for Radio Transmitters Part 2: Bandwidth, Out-of-Band Power and Power of Non-Essential 1969 IEC 0 Oscillations - Edition 1.0 10781 60244-2A First supplement to Publication 60244-2 (1969) Methods of measurement for radio transmitters Part 2: Bandwidth, out-of- 1969 IEC 0 band power and power of non-essential oscillations Appendices - Edition 1.0 10782 60244-2B Second supplement to Publication 60244-2 (1969) Methods of measurement for radio transmitters Part 2: Bandwidth, out- 1969 IEC 0 of-band power and power of non-essential oscillations Modulating signals for the measurement of bandwidth and out-of- band power of transm 10783 60231A First supplement to Publication 60231 (1967) General principles of nuclear reactor instrumentation - Edition 1.0 1969 IEC 0 10784 60067B Second supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves - Edition 2.0 1969 IEC 0 10785 60258 Direct Acting Recording Electrical Measuring Instruments and Their Accessories - Edition 1.0; Includes Amendment 1: 1968 IEC 0 11/1976 10786 60264-1 Packaging of winding wires. Part 1: Containers for round winding wires - Edition 1.0 1968 IEC 0 10787 60276 Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip-Rings - Edition 1.0 1968 IEC 0 10788 60151-16 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 16: Methods of Measurement for Television 1968 IEC 0 Picture Tubes - Edition 1.0 10789 60151-18 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 18: Methods of Measurement of Noises Due 1968 IEC 0 to Mechanical or Acoustic Excitations - Edition 1.0 10790 60067A First supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves - Edition 2.0 1967 IEC 0 10791 60153-6 Hollow Metallic Waveguides Part 6: Relevant Specifications for Medium Flat Rectangular Waveguides - Edition 1.0; 1967 IEC 0 Includes Amendment 1: 05/1977 10792 60151-15 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 15: Methods of Measurement of Spurious 1967 IEC 0 and Unwanted Electrode Currents - Edition 1.0 10793 60231 General Principles of Nuclear Reactor Instrumentation - Edition 1.0 1967 IEC 0 10794 60246 Connecting Wires Having a Rated Voltage of 20 kV and 25 kV D.C. and a Maximum Working Temperature of 105 1967 IEC 0 Degrees C for Use in Television Receivers - Edition 1.0 10795 60211 Maximum Demand Indicators, Class 1.0 - Edition 1.0 1966 IEC 0 10796 60230 Impulse Tests on Cables and Their Accessories - Edition 1.0 1966 IEC 0 10797 60130-4 NULL 1966 IEC 0 10798 60130-5 Connectors for Frequencies Below 3 MHz (Mc/s) Part 5: Rectangular Multipole Connectors with Blade Contacts - Edition 1966 IEC 0 1.0 10799 60191-2 Mechanical Standardization of Semiconductor Devices - Part 2: Dimensions - Edition 1.0 1966 IEC 0 10800 60190 NULL 1966 IEC 0 10801 60191-2Y Twenty-third supplement to Publication 60191-2 (1966) Mechanical standardization of semiconductor devices Part 2: 1966 IEC 0 Dimensions - Edition 1.0 10802 60151-8 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 8: Measurement of Cathode Heating Time 1966 IEC 0 and Heater Warm-Up Time - Edition 1.0; Includes Corrigendum: 07/1967 10803 60151-9 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 9: Methods of Measuring the Cathode- 1966 IEC 0 Interface Impedance - Edition 1.0 10804 60151-10 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 10: Methods of Measurement of Audio- 1966 IEC 0 Frequency Output Power and Distortion - Edition 1.0 10805 60151-11 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 11: Methods of Measurement of Radio- 1966 IEC 0 Frequency Output Power - Edition 1.0 10806 60151-12 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 12: Methods of Measuring Electrode 1966 IEC 0 Resistance, Transconductance, Amplification Factor, Conversion Resistance and Conversion Transconductance - Edition 1.0 10807 60151-13 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 13: Methods of Measurement of Emission 1966 IEC 0 Current from Hot Cathodes for High-Vacuum Electronic Tubes and Valves First Edition - Edition 1.0 10808 60151-0 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 0: Precautions Relating to Methods of 1966 IEC 0 Measurement of Electronic Tubes and Valves - Edition 1.0 10809 60067 Dimensions of electronic tubes and valves - Edition 2.0 1966 IEC 0 10810 60151-6 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 6: Methods of Application of Mechanical 1965 IEC 0 Shock (Impulse) Excitation to Electronic Tubes and Valves - Edition 1.0 10811 60169-3 Radio-Frequency Connectors Part 3: Two Pin Connector for Twin Balanced Aerial Feeders - Edition 1.0 1965 IEC 0 10812 60130-2 NULL 1965 IEC 0 10813 60130-3 NULL 1965 IEC 0 10814 60130-6 NULL 1965 IEC 0 10815 60195 Method of Measurement of Current Noise Generated in Fixed Resistors - Edition 2.0 1965 IEC 0 10816 60197 High-Voltage Connecting Wire with Flame Retarding Insulation for Use in Television Receivers - Edition 1.0 1965 IEC 0 10817 60153-1 Hollow Metallic Waveguides Part 1: General Requirements and Measuring Methods - Edition 2.0 1964 IEC 0 10818 60151-7 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 7: Measurement of Equivalent Noise 1964 IEC 0 Resistance - Edition 1.0 10819 60153-3 Hollow Metallic Waveguides Part 3: Relevant Specifications for Flat Rectangular Waveguides - Edition 1.0 1964 IEC 0 10820 60151-5 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 5: Methods of Measuring Hiss and Hum - 1964 IEC 0 Edition 1.0 10821 60167 NULL 1964 IEC 0 10822 60141-2 Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 2: Internal Gas- Pressure Cables and Accessories 1963 IEC 0 for Alternating Voltages up to 275 kV - Edition 1.0; Includes Amendment 1: 05/1967 10823 60141-3 Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 3: External Gas- Pressure (Gas Compression) 1963 IEC 0 Cables and Accessories for Alternating Voltages up to 275 kV - Edition 1.0; Includes Amendment 1: 05/1967 10824 60145 Var-Hour (Reactive Energy) Meters - Edition 1.0 1963 IEC 0 10825 60151-1 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 1: Measurement of Electrode Current - 1963 IEC 0 Edition 1.0 10826 60151-2 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 2: Measurement of Heater or Filament 1963 IEC 0 Current - Edition 1.0 10827 60151-3 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 3: Measurement of Equivalent Input and 1963 IEC 0 Output Admittances - Edition 1.0 10828 60151-4 Measurements of the Electrical Properties of Electronic Tubes and Valves Part 4: Methods of Measuring Noise Factor - 1963 IEC 0 Edition 1.0 10829 60152 Identification by Hour Numbers of the Phase Conductors of 3-Phase Electric Systems - Edition 1.0 1963 IEC 0 10830 60063 Preferred Number Series for Resistors and Capacitors - Edition 3.0 1963 IEC 0 10831 IECEE CEE-7 NULL 1963 IEC 0 10832 60100 Methods for the Measurement of Direct Interelectrode Capacitances of Electronic Tubes and Valves - Edition 2.0; Includes 1962 IEC 0 Amendment 1: 11/1969 10833 60134 Rating Systems for Electronic Tubes and Valves and Analogous Semiconductor Devices - Edition 1.0 1961 IEC 0 10834 60135 Numbering of Electrodes and Designation of Units in Electronic Tubes and Valves - Edition 1.0 1961 IEC 0 10835 60119 NULL 1960 IEC 0 10836 60121 Recommendation for Commercial Annealed Aluminium Electrical Conductor Wire - Edition 1.0 1960 IEC 0 10837 60114 Recommendation for Heat-Treated Aluminium Alloy Busbar Material of the Aluminium-Magnesium-Silicon Type - 1959 IEC 0 Edition 1.0; Includes Corrigendum 1 10838 60105 Recommendation for Commercial-Purity Aluminium Busbar Material - Edition 1.0 1958 IEC 0 10839 60028 International standard of resistance for copper - Edition 2.0 1925 IEC 0 10840 62843 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment - 1925 IEC 0 Edition 1.0 Hercules Ebooks Institute www.herculesebooks.com [email protected] +989141908737