NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. apríla 2011 do 30. apríla 2011

Documents Title Closing Date

1/2173/FDIS Amendement 1 to IEC 60050-617: International Electrotechnical Vocabulary - Part 617: Organization/Market of electricity 24.06.2011

2/1629/CDV IEC 60034-18-21 Ed.2: Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for 23.09.2011 wire-wound windings - Thermal evaluation and classification

2/1630/CDV IEC 60034-18-31 Ed.2: Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for 23.09.2011 form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines

2/1626/CDV IEC 60034-2-3 Ed.1: Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter- 09.09.2011 fed AC motors

9/1539/FDIS IEC 62621 Ed.1: Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for 17.06.2011 overhead contact line systems

9/1542/CD IEC 62497-1 A1 Ed.1: Amendment 1 to IEC 62497-1 Ed.1: Railway applications - Insulation coordination - Part 1: Basic requirements - 22.07.2011 Clearances and creepage distances for all electrical and electronic equipment

10/838/CDV Amendment 1 to IEC 61181 Ed.2: Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests 23.09.2011 on electrical equipment

14/685/CD IEC 60076-14 Ed.1: Power Transformers - Part 14: Design and application of liquid-immersed power transformers using high- 01.07.2011 temperature insulation materials

14/686/FDIS IEC 61378-1 Ed.2: Converter transformers - Part 1: Transformers for industrial applications 24.06.2011

14/687/CDV IEC 60076-18 Ed.1: Power transformers - Part 18: Measurement of frequency response 30.09.2011

Stránka 1 15/631/FDIS IEC 60674-3-8 Ed. 1.0: Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially 24.06.2011 oriented polyethylene naphthalate (PEN) films used for electrical insulation

15/626/FDIS IEC 60684-3-205 Ed. 1.0: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat- 03.06.2011 shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1

15/627/FDIS IEC 60684-3-271 Ed. 3.0: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat- 03.06.2011 shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1

15/625/FDIS IEC 60684-3-247 Ed. 1.0: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat- 03.06.2011 shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall

17A/963/CD IEC/TR 62271-306 Ed 1.0: High-voltage switchgear and controlgear - Part 306: Guide to IEC 62271-100, IEC 62271-100 and other 08.07.2011 IEC standards related to alternating current circuit-breakers

17D/439/CD IEC 61439-7 Ed. 1: Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific installations at public sites 01.07.2011 such as marinas, camping sites, market squares and similar applications and for charging station for Electrical Vehicles

22/180/CDV IEC 62477-1 Ed.1: Safety requirements for power electronic converter systems and equipment Part 1: General 09.09.2011

22F/245/CD IEC/TR 60919-1 Am.1 Ed.3: Performance of high-voltage direct current (HVDC) systems with line commutated converters - Part 1: 29.07.2011 Steady-state conditions

23/531/CDV Amendment 1 to IEC 61535: Installation Couplers intended for permanent connection in fixed installations 30.09.2011

23E/717/CDV Amendment 1 to IEC 61008-1 Ed.3: Residual current operated circuit-breakers without integral overcurrent protection for household 23.09.2011 and similar uses (RCCBs) - Part 1: General rules

23E/718/CDV Amendment 1 to IEC 61009-1 Ed. 3: Residual current operated circuit-breakers with integral overcurrent protection for household and 23.09.2011 similar uses (RCBOs) - Part 1: General rules

Stránka 2 27/796/CD IEC 60519-12 Ed. 1.0 - Safety in electroheating installations - Part 12: Particular requirements for infra-red electroheating installations 22.07.2011

31/927/CDV IEC 60079-33 Ed. 1.0: Explosive atmospheres - Part 33: Equipment protection by special protection "s" 16.09.2011

31/929/CDV IEC 60079-1 Ed. 7.0: Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 23.09.2011

32A/285/CD IEC 60549 Ed 2.0: High-voltage fuses for the external protection of shunt capacitors 22.07.2011

32A/285A/CD IEC 60549 Ed 2.0: High-voltage fuses for the external protection of shunt capacitors 22.07.2011

34A/1468/FDIS IEC 61199 Ed.3: Single-capped fluorescent lamps - Safety specifications 17.06.2011

34B/1601/FDIS IEC 60061 3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - 24.06.2011 Amendment 44

34D/1009/CDV IEC 60598-2-13 Ed 1 Am 1: Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires 09.09.2011

36/302/CD IEC 60507 Ed. 3.0: Artificial pollution tests on high-voltage insulators to be used on a.c. systems 29.07.2011

40/2106/CDV IEC 60294 Ed.2: Measurement of the dimensions of a cylindrical component with axial terminations 08.07.2011

40/2107/CDV IEC 60301 Ed.3: Preferred diameters of wire terminations of capacitors and resistors 08.07.2011

Stránka 3 40/2108/CDV IEC 60717 Ed.2: Method for the determination of the space required by capacitors and resistors with unidirectionalterminators 08.07.2011

42/289/CD IEC 60270 A1 Ed. 3.0: High-voltage test techniques - Partial discharge measurements 2011-07-15

45A/837/CD IEC 60987 A1 Ed.2: Amendment 1 to IEC 60987 Ed.2: Nuclear Power Plants - Instrumentation and control important to safety - 01.07.2011 Hardware design requirements for computer-based sytems

46A/1027/CDV IEC 61196-1-119: Coaxial communication cables - Part 1-119: Electrical test methods - RF Power Rating 09.09.2011

46C/943/CD IEC/TR 62222 Ed. 2: Fire performance of communication cables installed in buildings 22.07.2011

47A/864/CD IEC 62215-3 Ed.1: Integrated circuits - Measurement of pulse immunity - Part3: Non-synchronous transient injection method 01.07.2011

47/2094/FDIS IEC 60749-40 Ed.1: Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a 24.06.2011 strain gauge

47F/82/FDIS IEC 62047-9 Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement 24.06.2011 for MEMS

47F/83/FDIS IEC 62047-5 Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 5: RF MEMS switches 24.06.2011

48B/2238/FDIS IEC 60512-9-3 Ed 2.0: Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: 03.06.2011 Mechanical operation (engaging/separating) with electrical load

48B/2239/FDIS IEC 61076-2-106 Ed .1.0: Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail 10.06.2011 specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67

Stránka 4 48B/2240/FDIS IEC 61076-2- Ed 2.0:Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular 10.06.2011 connectors

48B/2241/FDIS IEC 61076-2-001 Ed 1.0: Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail 10.06.2011 specification

48B/2242/CDV IEC 60352 Ed 4.0: Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 16.09.2011

48B/2232F/CDV IEC 61076-4-116 Ed 1.0: Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors: Detail 05.08.2011 specification for a high-speed two-part connector with integrated shielding function

48D/469/CD IEC 62610-4 Ed. 1.0: Mechanical structures for electronic equipment - Thermal management - Part 4: Cooling performance tests for 01.07.2011 water supplied heat exchangers in electronic cabinets

51/993F/CDV IEC 62358 Ed.2: Ferrite cores - Standard inductance factor for gapped cores and its tolerance

51/992F/CDV IEC 62674-1 Ed.1: High Frequency Inductive Components - Part 1: Fixed surface mount inductors for use in electronic and 09.09.2011 telecommunication equipment

55/1231/CD IEC 60317-27 A2 Ed. 3.0: Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire 15.07.2011

55/1232/CDV IEC 60317-48 A1 Ed. 1.0: Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish 23.09.2011 impregnated, bare or enamelled round copper wire, temperature index 155

55/1234/CDV IEC 60317-2 Ed. 4.0: Specifications for particular types of winding wires. Part 2: Solderable polyurethane enamelled round copper 30.09.2011 wire, class 130, with a bonding layer

55/1236/CDV IEC 60851-6 Ed. 3.0: Winding wires - Test methods- Part 6: Thermal properties 30.09.2011

Stránka 5 56/1424/CDV IEC 61710 Ed. 2.0: Power law model - Goodness-of-fit tests and estimation methods 23.09.2011

56/1422/FDIS IEC 61709 Ed. 2.0: Electric components - Reliability - Reference conditions for failure rates and stress models for conversion 03.06.2011

57/1125/CDV IEC 62488-1 Ed.1: Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power 02.09.2011 line carrier systems operating over EHV/HV/MV electricity grids

57/1126/CD IEC 61968-8 Ed.1: Application integration at electric utilities - System interfaces for distribution management - Part 8: Interface 08.07.2011 Standard For Customer Support

62C/517/CD IEC 60601-2-68 Ed.1: Particular requirements for basic safety and essential performance of X-ray based Image Guided Radiotherapy 22.07.2011 Equipment for use with electron accelerators, light ion beam therapy systems and radionuclide beam therapy systems

64/1775/CD IEC 60364-4-44 Amd.1 Ed.2: Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage 01.07.2011 disturbances and electromagnetic disturbances - Amendment 1: Clause 443 - Protection against overvoltages of atmospheric origin or due to switching 64/1777/CD IEC 60364-5-53 Amd.2 Ed.3: Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, 01.07.2011 switching and control - Amendment 2: Clause 534 - Devices for protection against overvoltages

65B/766/CDV IEC 61514-2 am 1 Ed.1.0: Industrial Process Control Systems - Part 2: Methods of evaluating the performance of intelligent valve 02.09.2011 positioners with pneumatic outputs

68/422/CDV 2nd Amendment to 60404-11 Ed.1: Method of test for thedetermination of surface insulation resistance of magnetic sheet and strip 02.09.2011

68/423/CDV IEC 60404-15 Ed.1: Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly 02.09.2011 magnetic materials

69/188/CD ISO/IEC 15118-1 Ed. 1.0: Road vehicles - Vehicle to grid communication interface - Part 1:General information and use-case 08.07.2011 definition

Stránka 6 69/189/CD ISO/CEI 15118-2 Ed. 1.0 Road vehicles - Vehicle-to-Grid Communication Interface - Part 2:Technical protocol description and Open 15.07.2011 Systems Interconnections (OSI) layer requirements

76/444/CDV IEC 60601-2-22 Amd.1 Ed.3: Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential 09.09.2011 performance of surgical, cosmetic, therapeutic and diagnostic laser equipment

78/912/CDV IEC 60900 Ed.3: Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. 30.09.2011

80/617/FDIS IEC 61993-2 Ed.2: Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - 10.06.2011 Part 2: Class A shipborne equipment of the universal automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results 80/620/CD IEC 62287-2 Ed.1: Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the 15.07.2011 Automatic Identification System (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques

80/619/CDV IEC 61097-6 A1 Ed.2: Amendment to IEC 61097-6 Ed.2: Global maritime distress and safety system (GMDSS) - Part 6: Narrowband 16.09.2011 direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) 82/646/CDV IEC 62548 Ed.1: Design requirements for photovoltaic (PV) arrays 16.09.2011

82/647/FDIS IEC 62253 Ed.1: Photovoltaic pumping systems - Design qualification and performance measurements 24.06.2011

85/387/FDIS IEC 61557-13 Ed.1: Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, 10.06.2011 measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems 86/396/FDIS IEC 62496-2-1 Ed. 1.0: Optical circuit boards - Basic test and measurement procedures - Part 2-1: Measurements - Optical 17.06.2011 attenuation and isolation

86B/3205/CD IEC 61300-2-7 Ed. 2.0: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 08.07.2011 2-7: Tests - Bending moment

Stránka 7 86B/3207/CD IEC 61300-2-19 Ed. 3.0: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 08.07.2011 2-19: Tests - Damp heat (steady state)

86B/3213/CD IEC 61300-3-47 Ed. 1.0: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 15.07.2011 3-47: Examinations and measurements - Endface geometry of PC/APC spherically polished ferrules using interferometry

86B/3217/CD IEC 61300-2-14 Ed. 3.0: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 29.07.2011 2-14: Tests - Optical power

90/263/FDIS IEC 61788-4 Ed.3: Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite 03.06.2011 superconductors

90/267/FDIS IEC 61788-6 Ed.3: Superconductivity - Part 6: Mechanical properties measurment - Room temperature tensile test of Cu/Nb-Ti 24.06.2011 composite superconductors

90/268/FDIS IEC 61788-11 Ed.2: Superconductivity - Part 11: Residual resistance ratio measurment - Residual resistance ratio of Nb3Sn 24.06.2011 composite superconductors

91/972/CDV IEC 61249-4-18: Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg 09.09.2011 materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly 91/973/CDV IEC 61249-4-19: Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg 09.09.2011 materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly 100/1836/CD IEC 62379-5-1/Ed.1: Common control interface for networked digital audio and video products - Part 5-1: Transmission over networks - 01.07.2011 General (TA4)

100/1837/CD IEC 62379-5-2/Ed.1: Common control interface for networked digital audio and video products - Part 5-2: Transmission over networks - 01.07.2011 Signalling (TA4)

100/1846/CD IEC 60268-3 Ed 4: Sound System Equipment - Part 3: Amplifiers (GMT) 15.07.2011

Stránka 8 101/334/CDV IEC 61340-4-10 Ed.1: Test method for the protection of electrostatic discharge susceptible Items - Two-point resistance measurement 16.09.2011

101/333/CD IEC 61340-5-1 Ed.2: ELECTROSTATICS - Part 5-1: Protection of electronic devices from electrostatic phenomena - General 03.06.2011 requirements

101/335/CD IEC 61340-4-7 Ed.2: Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization 17.06.2011

104/547/CDV IEC 60721-2-2 Ed.2: Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation 09.09.2011 and wind

104/548/CDV IEC 60721-2-3 Ed.2: Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure 09.09.2011

104/549/CDV IEC 60068-2-78 Ed.2: Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state 09.09.2011

104/546/CDV IEC 60721-2-1 Ed.2: Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - 09.09.2011 Temperature and humidity

105/327/CDV IEC 62282-6-200 Ed.2: Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods 16.09.2011

107/153/CDV IEC 62396-1 Ed.1: Process management for avionics - Atmospheric radiation effects - Part 1: Accommodation of atmospheric 09.09.2011 radiation effects via single event effects within avionics electronic equipment

108/446F/CDV IEC 62623 Ed 1.0: Measuring the Energy Consumption of Desktop and Notebook Computers 29.07.2011

108/448/CDV IEC 62075 Ed 2.0: Audio/video, information and communication technology equipment - Environmentally conscious design 16.09.2011

Stránka 9 110/289/CDV IEC 62341-6-3 Ed.1: ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - Part 6-3: Measuring methods of image quality 09.09.2011

110/293/CDV IEC 62341-5-2 Ed.1: Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance test methods 16.09.2011

110/294/CDV IEC 61747-6-1 Ed.1: Liquid crystal display devices - Part 6-1: Measuring methods for liquid crystal display modules -Transmissive type 16.09.2011

110/296/FDIS IEC 61747-6-3 Ed.1: Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact 24.06.2011 measurement of active matrix liquid crystal display modules

112/172F/CDV IEC 60493-1 Ed.2: Guide for the statistical analysis of ageing test data. Part 1: Methods based on mean values of normally distributed test results

114/65/DTS IEC 62600-1 TS Ed.1: Marine energy - Wave, tidal and other water current converters - Part 1:Terminology 08.07.2011

CIS/A/943/CD CISPR 16-1-6 Ed.1: Specification for radio distrubance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance 01.07.2011 and immunity measuring apparatus - EMC-antenna calibration

CIS/A/944/CD CISPR 16-1-2 am3 f2 Ed 1.0: Introduction of the CDNE for emission measurement 01.07.2011

CIS/A/946/CD CISPR 16-2-1 am3 Ed.2: Measurement of disturbance voltage with a CDNE 22.07.2011

CIS/A/947/CD CISPR 16-1-5 Amd.2 Ed. 1.0: Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio 29.07.2011 disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz

CIS/F/537/FDIS CISPR 14-1 A2 Ed.5: Inclusion of induction cooking appliances 24.06.2011

Stránka 10 CIS/F/538/DTR TR CISPR 30-1 Ed.1: Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped 24.06.2011 fluorescent lamps

CIS/F/539/DTR TR CISPR 30-2 Ed.1: Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps (excluding 24.06.2011 fluorescent lamps)

CIS/H/217/ISH Interpretation Sheet for clause 8 of IEC 61000-6-3 Amd. 1 Ed.2 10.06.2011

CIS/H/218/ISH Interpretation Sheet for clause 8 of IEC 61000-6-4 Amd. 1 Ed.2 10.06.2011

CABPUB/51/CDV ISO/IEC DIS 17024, Conformity assessment - General requirements for bodies operating certification of persons 16.09.2011

Stránka 11 Stránka 12 Stránka 13 Stránka 14 Stránka 15 Stránka 16 Stránka 17 Stránka 18 Stránka 19 Stránka 20 Stránka 21