DOCSLIB.ORG

Module (Daughter Bd) 02-Nov-2015

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Module (Daughter Bd) 02-Nov-2015 8 7 6 5 4 3 2 1 THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS JUMPER TABLE REVISIONS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR REV DESCRIPTION DATE APPROVED USED IN FURNISHING INFORMATION TO OTHERS, OR FOR ANY OTHER JP# ON OFF A ORIGINATION NHR-039086 JUN-2014 R.GETZ PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS 1 OWNED OR CONTROLLED BY ANALOG DEVICES. 2 3 RELAY CONTROL CHART D 4 D CONTROL CODE DEVICE FUNCTION CONNECTOR 5 * SEE ASSEMBLY INSTRUCTIONS C C B B 02-NOV-2015 MODULE (DAUGHTER BD) TEMPLATE ENGINEER DATE ANALOG - HARDWARE SERVICES SCHEMATIC DEV CES - HARDWARE SYSTEMS HW TYPE : MODULE - Product(s): Zynq / AD9361 TEST ENGINEER <PRODUCT_1> - A COMPONENT ENGINEER PACKAGE : PinCount-lead N/A Package-family A - : Pitch-pitch StyleVendor Style TEST PROCESS <User Define> - HARDWARE RELEASE <User Define> - <User Define> DESIGNER MASTER PROJECT TEMPLATE TESTER TEMPLATE DRAWING NO. REV. S.LEE/ TBD no_template PTD ENGINEER UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES 02_038702 C <PTD_ENGINEER> DECIMALS FRACTIONS ANGLES P.O SPEC. BK/BD SPEC. SOCKET OEM OEM PART# HANDLER CHECKER SIZE SCALE CODE ID NO. X.XX +-0.010 +-1/32 +-2 - X.XXX +-0.005 DD 1:1 CodeID SHEET 1 OF 10 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 REVISIONS REV DESCRIPTION DATE APPROVED PHY1_1V8 3.3V E16 PHY1_VDD_3V3 PS_MIO17_501_ETH0_TX_D0 PS_MIO26_501_ETH0_RX_D3 PHY1_AVDD_1V8_OUT PS_MIO18_501_ETH0_TX_D1 PS_MIO25_501_ETH0_RX_D2 1 2 PHY1_AVDD_1V8 E13 L0805 1 2 PS_MIO19_501_ETH0_TX_D2 PS_MIO24_501_ETH0_RX_D1 PS_MIO20_501_ETH0_TX_D3 PS_MIO23_501_ETH0_RX_D0 D 100OHM L0805 D C201 C211 C203 C210 C218 C219 100OHM PS_MIO16_501_ETH0_TX_CLK E15 PHY1_AVDD_3V3 PS_MIO22_501_ETH0_RX_CLK U16 0.1UF 0.1UF 0.1UF 10UF 4.7UF 1UF USB_OTG_P USB_OTG_N 1 2 PS_MIO21_501_ETH0_TX_CTL PS_MIO27_501_ETH0_RX_CTL VCC-3P3V L0805 GND 1 6 100OHM R178 GND PHY1_DVDD_1V0 10K PHY1_DVDD_1V0 PHY1_AVDD_3V3 2 5 PAD 56 55 54 53 52 51 50 49 48 47 46 45 44 43 U10 PHY1_AVDD_1V8 GND PAD PHY1_AVDD_1V8_OUT VDDO VDDO TXD(3) TXD(2) TXD(1) TXD(0) RXD(3) RXD(2) RXD(1) RXD(0) TX_CLK RX_CLK C58 C217 C214 C208 C49 SPARE 3 4 SPARE TX_CTRL C75 C73 C63 RX_CTRL PIN PIN PHY1_DVDD_1V0 0.1UF 0.1UF 4.7UF 1 42 PHY1_AVDD_1V8 1UF 0.1UF 0.1UF 0.1UF 4.7UF S_INP DVDD PHY1_1V8 2 41 CDSOT23-SR208 S_INN REGCAP2 3 40 35 AVDD18 DVDD_OUT GND 4 39 C242 R11 S_OUTP AVDD18_OUT GND 5 38 S_OUTN AVDD18 0.1UF 4.99K 6 37 DVDD REGCAP1 7 36 PS_MIO52_501_ETH0_MDC MDC REG_IN PHY1_VDD_3V3 PS_MIO53_501_ETH0_MDIO 8 35 MDIO PHY1 AVDDC18 41 SPARE 9 34 PHY1_1V8 PIN CLK125 XTAL_IN E14 10 33 1.8V PHY1_VDD_3V3 VDDO_SEL XTAL_OUT 11 32 SPARE 1 2 PHY1_1V8 VDDO HSDACP PIN Y2 SPARE 12 31 SPARE C60 L0805 43 42 51 52 4 2 3 31 PIN LED(2)/INTN HSDACN PIN 25.000MEGHZ PHY1_LED_1 13 30 100OHM C212 C206 C74 C78 C224 C225 C226 C50 LED(1) RSET 1 3 27PF 14 29 SPARE C PHY1_LED_0 LED(0) TSTPT PIN C 0.1UF 0.1UF 4.7UF 0.1UF 0.1UF 0.1UF 4.7UF 1UF R50 C59 GND 4.99K 2 4 GND GND 27PF AVDD18 AVDD18 CONFIG RESETN MDIN(3) MDIP(3) AVDD33 MDIN(2) MDIP(2) MDIN(1) MDIP(1) AVDD33 MDIN(0) MDIP(0) GND GND GND PHY1_AVDD_3V3 18 22 24 28 15 16 17 19 20 21 23 25 26 27 88E1512-56QFN PHY1_AVDD_1V8 R12 GND 0 PS_MIO8_500_ETH0_RESETN ETH_MD4_N ETH_MD1_P VCC-3P3V-IO VCCPCOM-1P8V VCCPCOM-1P8V ETH_MD4_P ETH_MD1_N ETH_MD3_N ETH_MD2_P R194 ETH_MD3_P ETH_MD2_N C184 C181 C182 C183 VCCPCOM-1P8V VCC-3P3V-IO 1K 1UF VCCPCOM-1P8V 1UF 1UF 1UF R8 GND U15 R7 Q5 20 28 30 32 1 10K 10K R191 GND PHY1_VDD_3V3 R18 2 3 VDDIO 1K VDD33 VDD18 VDD18 PS-SRST# CARRIER_RESET ETH_PHY_LED0 29 B R16 PS_MIO30_501_USB0_STP STP 17 B VCCPCOM-1P8V 220 27 CPEN USB_OTG_CPEN GND C20 D17 F21 G18 K18 U1 Q4 PS_MIO07_500_USB_RESET_B RESETB 1K 3 3 BSS138LT1G H18 A19 D 23 DATA0 PS_MIO32_501_USB0_D0 PS_MIO_VREF_501 PS_MIO53_501 PS_MIO53_501_ETH0_MDIO USB_ID ID 4 A22 A20 1 22 DATA1 PS_MIO33_501_USB0_D1 PS-SRST# PS_SRST_B_501 PS_MIO52_501 PS_MIO52_501_ETH0_MDC G USB_VBUS_OTG VBUS 5 G21 B20 3 Q2 12/17 LPR-031889_24MHZ 21 DATA2 PS_MIO34_501_USB0_D2 PS_MIO16_501_ETH0_TX_CLK PS_MIO16_501 PS_MIO51_501 PS_MIO51_501_JX4 R37 VCC-3P3V-IO VBAT 6 G17 B22 D 2 S DATA3 PS_MIO35_501_USB0_D3 PS_MIO17_501_ETH0_TX_D0 PS_MIO17_501 PS_MIO50_501 PS_MIO50_501_SD0_CD 1 BSS138TA VCCPCOM-1P8V 18 7 G20 A18 10K PHY1_LED_0 USB_OTG_P DP DATA4 PS_MIO28_501_USB0_D4 PS_MIO18_501_ETH0_TX_D1 PS_MIO18_501 VCCO_MIO1_501 VCCO_MIO1_501 VCCO_MIO1_501 VCCO_MIO1_501 VCCO_MIO1_501 PS_MIO49_501 PS_MIO49_501_JX4 G 19 9 G19 B21 DNI Y3 USB_OTG_N DM DATA5 PS_MIO37_501_USB0_D5 PS_MIO19_501_ETH0_TX_D2 PS_MIO19_501 PS_MIO48_501 PS_MIO48_501_JX4 10 DATA6 PS_MIO38_501_USB0_D6 PS_MIO20_501_ETH0_TX_D3 H19 B19 S SPARE 15 PS_MIO20_501 PS_MIO47_501 PS_MIO47_501_JX4 2 GND 24.000MEGHZ PIN SPK_L 13 R14 BSS138TA DATA7 PS_MIO39_501_USB0_D7 F22 E17 4 SPARE 16 PS_MIO21_501_ETH0_TX_CTL PS_MIO21_501 PS_MIO46_501 PS_MIO46_501_JX4 PIN SPK_R 2 G22 C18 VDD NXT PS_MIO31_501_USB0_NXT PS_MIO22_501_ETH0_RX_CLK PS_MIO22_501 PS_MIO45_501 PS_MIO45_501_SD0_DATA3 1K 1 3 R175 26 31 F20 E18 PS_MIO09_500_USB_CLK_PD STANDBY OUTPUT REFCLK DIR PS_MIO29_501_USB0_DIR PS_MIO23_501_ETH0_RX_D0 PS_MIO23_501 PS_MIO44_501 PS_MIO44_501_SD0_DATA2 8 1 J19 D18 GND GND 39 VCCPCOM-1P8V REFSEL0 CLKOUT PS_MIO36_501_USB0_CLK PS_MIO24_501_ETH0_RX_D1 PS_MIO24_501 PS_MIO43_501 PS_MIO43_501_SD0_DATA1 R26 11 REFSEL1 PS_MIO25_501_ETH0_RX_D2 F19 F17 2 25 SPARE PS_MIO25_501 PS_MIO42_501 PS_MIO42_501_SD0_DATA0 R27 14 XO PIN H17 C19 10K REFSEL2 PS_MIO26_501_ETH0_RX_D3 PS_MIO26_501 PS_MIO41_501 PS_MIO41_501_SD0_CMD 10K 24 F18 C22 DNI RBIAS PS_MIO27_501_ETH0_RX_CTL PS_MIO27_501 PS_MIO40_501 PS_MIO40_501_SD0_CLK GND J18 C21 GND PS_MIO28_501_USB0_D4 PS_MIO28_501 PS_MIO39_501 PS_MIO39_501_USB0_D7 N/C GND_FLAG E20 D21 PHY1_VDD_3V3 R17 PS_MIO29_501_USB0_DIR PS_MIO29_501 PS_MIO38_501 PS_MIO38_501_USB0_D6 GND 12 PAD K19 D20 ETH_PHY_LED1 USB3320C-EZK PS_MIO30_501_USB0_STP PS_MIO30_501 PS_MIO37_501 PS_MIO37_501_USB0_D5 R176 R15 220 SPARE PS_MIO31_501_USB0_NXT E21 K16 PIN PS_MIO31_501 PS_MIO36_501 PS_MIO36_501_USB0_CLK Q3 8.06K K17 D19 1K 3 PS_MIO32_501_USB0_D0 PS_MIO32_501 PS_MIO35_501 PS_MIO35_501_USB0_D3 E22 J16 D GND PS_MIO33_501_USB0_D1 PS_MIO33_501 PS_MIO34_501 PS_MIO34_501_USB0_D2 1 G GND BANK_501 3 Q1 XC7Z035-L2FBG676I D 2 S PHY1_LED_1 1 BSS138TA A G A 2 S R13 BSS138TA GND MODULE (DAUGHTER BD) 1K GND SCHEMATIC ANALOG DEVCES HW TYPE : MODULE Product(s): Zynq / AD9361 <PRODUCT_1> THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. DESIGN VIEW DRAWING NO. REV REVERSE CURRENT PROTECTION IT IS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR USED IN FURNISHING INFORMATION TO OTHERS, <DESIGN_VIEW> OR FOR ANY OTHER PURPOSE DETRIMENTAL TO THE INTERESTS 02_038702 C OF ANALOG DEVICES. PTD ENGINEER SIZE SCALE THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS SHEET OF OWNED OR CONTROLLED BY OWNED ANALOG DEVICES. <PTD_ENGINEER> DD 1:1 2 10 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 REVISIONS REV DESCRIPTION DATE APPROVED VCCPCOM-1P8V VCC-3P3V-IO C41 VCCPCOM-1P8V 0.1UF C54 C55 GND 0.1UF 0.1UF R3 VCCPCOM-1P8V 5 21 17 U11 VCC-3P3V-IO D D 20K GND GND VCCA VCCB0 VCCB1 VCC-3P3V-IO C39 SW1 1A 2A 18 PS_MIO42_501_SD0_DATA0 6 DAT0B0 SDIO_DAT0B0 1B 2B DAT0A 14 DAT0B1 SDIO_DAT0B1 0.1UF GND PS_MIO43_501_SD0_DATA1 7 16 R76 DAT1A DAT1B0 SDIO_DAT1B0 C57 7914J-1-000E GND 15 R109 10K Y1 PS_MIO44_501_SD0_DATA2 1 DAT1B1 SDIO_DAT1B1 C42 4 DAT2A 23 0.1UF R4 DAT2B0 SDIO_DAT2B0 4.99K VDD 3 8 0.1UF 1 3 PS_MIO45_501_SD0_DATA3 DAT3A DAT2B1 SDIO_DAT2B1 4.99K STANDBY OUTPUT VCCPCOM-1P8V 22 GND DAT3B0 SDIO_DAT3B0 GND GND PWR_GD_1.35V 10 DAT3B1 SDIO_DAT3B1 R77 2 33.333MEGHZ 4 10K VCCPCOM-1P8V PS_MIO41_501_SD0_CMD CMDA 20 VCC-3P3V-IO DNI CMDB0 SDIO_CMDB0 J3 R114 12 SDIO_CMDB1 SDIO_DAT2B0 1 GND GND CMDB1 DAT2 39 A26 B23 E24 U1 19 SDIO_DAT3B0 2 CLKB0 SDIO_CLKB0 CD/DAT3 R0603 C23 C24 PS_MIO40_501_SD0_CLK 9 VCCPCOM-1P8V SDIO_CMDB0 3 PS_POR_B_500 PS_MIO15_500 PS_MIO15_500_JX4 CLKA 13 CMD B24 D23 CLKB1 SDIO_CLKB1 4 PS_MIO14_500_JX4 24 PS_CLK_500 PS_MIO14_500 R32 R31 SEL VDD E26 B25 VCC-3P3V-IO SDIO_CLKB0 5 PS_MIO00_500_JX4 PS_MIO0_500 PS_MIO13_500 PS_MIO13_500_JX4 CLK D26 A23 R60 20K 20K GND GND PAD R36 6 PS_MIO01_500_QSPI0_SS_B PS_MIO1_500 PS_MIO12_500 PS_MIO12_500_JX4 VSS E25 B26 S1 2 11 PAD 20K SDIO_DAT0B0 7 PS_MIO02_500_QSPI0_IO0 PS_MIO2_500 VCCO_MIO0_500 VCCO_MIO0_500 VCCO_MIO0_500 PS_MIO11_500 PS_MIO11_500_JX4 0 3 TXS02612RTWR DAT0 D25 A25 2 SD_SEL SDIO_DAT1B0 8 PS_MIO03_500_QSPI0_IO1 PS_MIO3_500 PS_MIO10_500 PS_MIO10_500_JX4 1 DAT1 F24 D24 J3-9 9 PS_MIO04_500_QSPI0_IO2 PS_MIO4_500 PS_MIO9_500 PS_MIO09_500_USB_CLK_PD C26 A24 GND PS_MIO05_500_QSPI0_IO3 PS_MIO5_500 PS_MIO8_500 PS_MIO8_500_ETH0_RESETN F23 MIO E23 CAS-120TB GND1 PS_MIO06_500_QSPI0_SCLK PS_MIO6_500 PS_MIO7_500 PS_MIO07_500_USB_RESET_B GND BANK_500 GND2 GND GND3 PINS XC7Z035-L2FBG676I C GND4 C GND DM3CS-SF VDDCAP QSPI FLASH VDDCAP R41 R46 R30 FB0 VCCPCOM-1P8V R39 10K 10K 10K C40 DNI 10K C207 DNI 220PF VCCPCOM-1P8V C204 C205 10UF 10UF R42 R47 0.1UF GND 3V3_I2C FB1 R28 R38 R40 GND GND 4.99K 4.99K 240 U13 10K 10K C209 R51 R52 32 39 U7 220PF B4 N25Q256A11E1240 33 PS_MIO01_500_QSPI0_SS_B VCC 4.7K 4.7K GND GND A0 15 D3 34 DAC1 R44 R48 B2 DQ0 PS_MIO02_500_QSPI0_IO0 A1 VCCP 16 FB2 PS_MIO06_500_QSPI0_SCLK C D2 35 VDDCAP DAC2 C2 DQ1 PS_MIO03_500_QSPI0_IO1 SCL_ADM1166 SCL 17 4.99K 4.99K S# C4 36 DAC3 R19 A4 W#/VPP/DQ2 PS_MIO04_500_QSPI0_IO2 SDA_ADM1166 SDA 18 C213 220PF PS-SRST# RESET/NC D4 DAC4 JX_VIN HOLD#/DQ3 PS_MIO05_500_QSPI0_IO3 13 19 R45 0 REF_IN_OUT REFIN DAC5 20 R49 R116 VSS NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC 37 DAC6 FB3 PWR_GD AUX2 4.99K PAD1 C202 38 14 1 2 5 6 JX_VCCO_12 20K E1 E2 E3 E4 E5 B3 A2 A3 A5 B1 B5 C5 D1 D5 3.3V_SEQ AUX1 REFOUT
Load more

Recommended publications
  • Powering an I.MX 6SX-Based System Using the PF3000 PMIC
    NXP Semiconductors Document Number: AN5161 Application Note Rev. 1.0, 7/2016 Powering an i.MX 6SX-based system using the PF3000 PMIC 1 Introduction Contents 1 Introduction. 1 The PF3000 is a highly integrated Power Management IC ideally suited to power NXP's i.MX 6SX, i.MX 6SL, i.MX 6S, i.MX 6DL, 2 PF3000 voltage regulators . 2 i.MX 6UL and the i.MX 7 series of applications processors. This 3 i.MX 6SX power management using the PF3000 . 3 Application Note discusses the power tree configuration for 4 PF3000 power input . 4 powering an i.MX 6SX based system using the PF3000. NXP analog ICs are manufactured using the SMARTMOS 5 PF3000 layout guidelines . 5 process, a combinational BiCMOS manufacturing flow that 6 PF3000 software support . 5 integrates precision analog, power functions and dense CMOS 7 Schematics. 6 logic together on a single cost-effective die. 8 References . 27 9 Revision history . 28 © 2016 NXP B.V. PF3000 voltage regulators 2 PF3000 voltage regulators Table 1 shows a summary of the voltage regulators in the PF3000. Output voltage and startup sequence of the regulators is programmed into the PMIC through One Time Programmable (OTP) memory. For more details, refer to the product datasheet. Table 1. PF3000 voltage regulators Regulator Output voltage range Load current rating 0.7 V to 1.425 V SW1A 1.8 V 1000 mA 3.3 V SW1B 0.7 V to 1.475 V 1750 mA 1.5 V to 1.85 V SW2 1250 mA 2.5 V to 3.3 V SW3 0.9 V to 1.65 V 1500 mA SWBST 5.0 V to 5.15 V 600 mA VSNVS 3.0 V 1.0 mA VLDO1 1.8 V to 3.3 V 100 mA VLDO2 0.8 V to 1.55 V 250 mA VLDO3 1.8 V to 3.3 V 100 mA VLDO4 1.8 V to 3.3 V 350 mA 1.8 V to 1.85 V VCC_SD 100 mA 2.85 V to 3.3 V V33 2.85 V to 3.3 V 350 mA VREFDDR VINREFDDR/2 10 mA Powering an i.MX 6SX-based system using the PF3000 PMIC, Rev.
    [Show full text]
  • Biological Properties and Genetic Characterization of Novel Low
    microorganisms Communication Biological Properties and Genetic Characterization of Novel Low Pathogenic H7N3 Avian Influenza Viruses Isolated from Mallard Ducks in the Caspian Region, Dagestan, Russia Marina Gulyaeva 1,2,* , Maria Alessandra De Marco 3, Ganna Kovalenko 4, Eric Bortz 4 , Tatiana Murashkina 1, Kseniya Yurchenko 1 , Marzia Facchini 5, Mauro Delogu 6, Ivan Sobolev 1, Alimurad Gadzhiev 7, Kirill Sharshov 1 and Alexander Shestopalov 1 1 Federal State Budget Scientific Institution, Federal Research Center of Fundamental and Translational Medicine, 630117 Novosibirsk, Russia; [email protected] (T.M.); [email protected] (K.Y.); [email protected] (I.S.); [email protected] (K.S.); [email protected] (A.S.) 2 Department of Natural Science, Novosibirsk State University, 630090 Novosibirsk, Russia 3 ISPRA Institute for Environmental Protection and Research, 40064 Ozzano dell’Emilia (BO), Italy; [email protected] 4 Department of Biological Sciences, University of Alaska, Anchorage, AK 99508, USA; [email protected] (G.K.); [email protected] (E.B.) 5 Department of Infectious Diseases, Istituto Superiore di Sanità, 00161 Rome, Italy; [email protected] 6 Department of Veterinary Medical Sciences, University of Bologna, 40064 Ozzano dell’Emilia (BO), Italy; Citation: Gulyaeva, M.; De Marco, [email protected] M.A.; Kovalenko, G.; Bortz, E.; 7 Department of Ecology and Sustainable Development, Dagestan State University, 367000 Dagestan, Russia; Murashkina, T.; Yurchenko, K.; [email protected] Facchini, M.; Delogu, M.; Sobolev, I.; * Correspondence: [email protected]; Tel.: +7-(952)-913-65-13 Gadzhiev, A.; et al. Biological Properties and Genetic Abstract: Avian influenza viruses (AIVs) are maintained in wild bird reservoirs, particularly in Characterization of Novel Low mallard ducks and other waterfowl.
    [Show full text]
  • Notebook Computer M350C/M360C Service Manual Preface
    Preface Notebook Computer M350C/M360C Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica- tion, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 July 2003 Preface Trademarks Intel® and Pentium® are registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks and./or registered trademarks of their respective companies. II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the M350C/ M360C series notebook PC.
    [Show full text]
  • Etruscan Glossarya.Pdf
    A B CD 1 2 Note: This glossary supplements Table 1. Copyright © 1981-2017 Mel Copeland. All rights reserved. 3 4.27.17 - Items in red are changes; often updated For those using the PDF version of this file, see the latest changes Etruscan_GlossaryA.xls at Etruscan Phrases 4 "X" locators designate Anatolian (Phrygian) texts 5 Updated to reconcile declension patterns 6 http://www.maravot.com/Etruscan_Phrases_a.html 7 Contact: [email protected] 8 9 English Etruscan Location 10 to, in (L. a) A TC120,TC127, Au95, Au102, AG-2, Z92, AN12, AN100, 11 to, in (L. a) A (continued) N21, N206, N371,Q701, Q717, R381, R499, N722, N731, MS23 12 to, in (L. a) A (continued) Q376, Q388, R542, R584, AH-9, AC-3, TC211, K159, PJ-1, J5-6, J40-10, PV-7, PW-12 13 and, and also, and indeed (L. ac, atque) AC Z58, Z432, Z1183, Au-1, TC46, TC90, Au95, K149, L50, J41-2 14 and, and also, and indeed (L. ac, atque) AK Z489, Z508, Z1139, XQ-1 15 call, to (L. accio-aire) ACA Z572, TC46 16 it/he will move, set in motion (L. ago-agere, Ind. I Fut. 3rd Pers. Single aget) ACE J40-8 17 call, to (L. accio-aire) ACeR M71 18 prophesy, to wish (L. auguro-are) ACERN (they prophesy) DL-2 (This mirror depicts reading from a liver) 19 level, make equal, compare (L. acquo-are) ACES N462 20 Achaia? (L. Achaia or Achaia-ae, Achaia or in Gen. Greece) ACHIE (AKIE) CP35 21 Agememnon ACHMEMNVN DM-6, CG-3 22 Achilles – see CG-1 ACHLE (AKLE) (See ACHVLE) MM-5, CG-1, DP-1, LM-4? CCG-3 23 Achilles – see CG-1 ACHL or ACHLA (ACH LA) CH-2 24 Achule, god in company of Thetis on a mirror, probably Achilles ACHVLE (AKVLE) (See ACHLE) CQ-2 25 Achloser, name of Briseis, concubine of Achilles? ACHLVSR ( ACHLPIMSR?, ACHVPIMSR?) CQ3 26 call, to (L.
    [Show full text]
  • LCD Panel Open
    Preface Notebook Computer M550G/M540G Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica- tion, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 August 2005 Preface Trademarks Intel® and Pentium® are registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks and./or registered trademarks of their respective companies. II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the M550G/ M540G series notebook PC.
    [Show full text]
  • PEX 8114RDK-F Hardware Reference Manual for Board Rev 300
    PEX 8114RDK-F Hardware Reference Manual For Board Revision 300 Version 4.2 February 2008 Website: www.plxtech.com Technical Support: www.plxtech.com/support Copyright © 2008 by PLX Technology, Inc. All Rights Reserved – Version 4.2 February 19, 2008 © 2008 PLX Technology, Inc. All Rights Reserved. PLX Technology, Inc. retains the right to make changes to this product at any time, without notice. Products may have minor variations to this publication, known as errata. PLX assumes no liability whatsoever, including infringement of any patent or copyright, for sale and use of PLX products. PLX Technology and the PLX logo are registered trademarks and ExpressLane is a trademark of PLX Technology, Inc. Other brands and names are the property of their respective owners. Order Number: PEX 8114-RDK/F-HRM-P1-4.2 PEX 8114RDK-F Hardware Reference Manual, Version 4.2 ii © 2008 PLX Technology, Inc. All Rights Reserved. Contents 1 General Information ............................................................................................................................... 1 1.1 PEX 8114 Features ......................................................................................................................... 2 1.2 PEX 8114RDK-F Features .............................................................................................................. 2 2 System Architecture............................................................................................................................... 3 3 Hardware Architecture ..........................................................................................................................
    [Show full text]
  • Mowachaht/Muchalaht First Nation K'ómoks
    0 C M 0 W S 2 46 K 0 0 T OL015 KK 0 H o 0 K304 H SC011 SC016 WT040 WS250 J010A 40 1 0 K K C O OL017 K305 a 0 H DA228 1 2 Q203 4 C 5 0 1 R 1 L 0 S M 0 0 Q205 W 25 3 3 2 A 9 4 3 WS246 5_ L L 2 A kw 0 r a K s 1 2 1 0 A 0 S T T K 1 9 O 1 0 C e O 0 r 0 p MQ500 0 C 1 K 0 1 H S 0 C K303 K S 0 0 W Q029A 0 C 2 0 e 0 C 0 M 1 WT009 u l 3 H61 5 k 4 i K 0 6 M M v 0 J010 0 ain 2 S 00 H C M -E 0 - 0 E 3 2 F e 4 M 0 C 1 O 5 SC017 1 5 K F U 3 r 1 1 WS230 N / 0 L 1 2 e J 31 d 1 O 1 0 a 88 Km H 3 m 98 Km 3 o R DA200 D W _ o K e L312 e t 3 W R S a 0 N t m WS249 S e MQ056 t d s P Q S e 1 0 Q027 s 5 M U - 1 c 2 4 i 0 S o 0 1 2 V R 15 0 0 3 T 0 5 O O N F J I W M 1 Harv.
    [Show full text]
  • CD-RW Drive - TEAC (M375C)
    Preface Notebook Computer M375C/M385C Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica- tion, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 July 2003 Preface Trademarks Intel® and Pentium® are registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks and./or registered trademarks of their respective companies. II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the M375C/ M385C series notebook PC.
    [Show full text]
  • ACEA Regulatory Guide 2021
    AUTOMOTIVE REGULATORY GUIDE 2021 It is with great pleasure that I present you ACEA’s Regulatory Guide, a unique publication that provides a comprehensive overview of the national and international regulations governing the automotive industry. This first edition covers the regulatory frameworks of the European Union (EU), United Nations Economic Commission for Europe (UNECE), Gulf Cooperation Council (GCC) and the Association of Southeast Asian Nations (ASEAN), as well as countries such as Brazil, China, India, Israel, Japan and South Korea. Looking at the many regulations that define how motor vehicles should be built and approved, I cannot stress enough the importance of a harmonised regulatory framework that allows for innovation and investment across our industry. Indeed, the European automotive industry is one of the most heavily regulated sectors in Europe with more than 100 EU Regulations and 80 Directives covering the sector’s activities. That is why ACEA has long been advocating the need for smarter, rather than simply more, legislation. To give you an example, with over 50 different safety regulations in the EU, 77 at UNECE level and 40 for the seven Gulf countries, the harmonisation of procedures and standards is much needed to further advance the global objective of reducing road fatalities to zero in the future. And the same applies to addressing the climate change challenge of course; increased global harmonisation will allow us to get to carbon-neutral mobility faster and more efficiently. With the support of national and international regulators, the automotive industry is fully committed to facing the challenges of today for a better tomorrow.
    [Show full text]
  • MACHXO3L DSI Breakout Board Schematics
    5 4 3 2 1 XO3L Breakout Board Revision B May, 2014 D D LEDS(1-4) RGB LED PMOD I/Os BANK 1 Header I/Os FPGA SMA INPUT I/Os LCMXO3L-6900C-6BG256C C U7 C BANK 2 & 3 BANK 0 & 5 SMA OUTPUT Header BANK 4 SPI I/Os FLASH Optional I2C PMOD Configuration USB to JTAG USB CONNECTOR USB to I2C Optional JTAG Configuration B B FPGA I/Os I/Os LCMXO3L-2100E-6UWG49CTR U9 MIPI_INPUT MIPI_OUTPUT A A Lattice Semiconductor Applications Email: [email protected] Title Block Diagram Size Project Schematic Rev B C MachXO3L DSI Breakout Board Board Rev B Date: May, 2014 Sheet of 71 5 4 3 2 1 5 4 3 2 1 D D 3.3V FB4 3.3V Optional JTAG VCCIO Header when C5 C6 C7 C8 C9 FB_60ohm 1 C1 C2 VCCIO is 2.5V R211 R212 R213 PART_NUMBER = HI0603P600R-10 VCCIO 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 3.3V Manufacturer = Laird-signal 4.7uF 0.1uF 4.7K 4.7K 4.7K 2 J1 FB5 1 1 2 2 FTDI_TDO [Pg7] 3 FTDI_TDI [Pg5] 3 4 FB_60ohm 1 C3 C4 4 5 PART_NUMBER = HI0603P600R-10 5 6 FTDI_TMS [Pg5,7] Manufacturer = Laird-signal 4.7uF 0.1uF 6 7 2 7 8 FTDI_TCK [Pg5,7] 3.3V 8 header_1x8 DNI R220 1K TP6 3.3V U1 FT2232HL 4 9 12 37 64 20 31 42 56 VPLL VPHY VCCIO VCCIO VCCIO VCCIO VCORE VCORE VCORE 16 0 R5 50 ADBUS0 17 0 R6 VREGIN ADBUS1 18 0 R7 C 49 ADBUS2 19 0 R8 C VREGOUT ADBUS3 21 ADBUS4 22 ADBUS5 DM[Pg3] 7 23 8 DM ADBUS6 24 DP[Pg3] DP ADBUS7 C10 C11 26 VCCIO R218 1K 14 ACBUS0 27 10uF 0.1uF RESET# ACBUS1 28 3.3V ACBUS2 29 R221 12K 6 ACBUS3 30 3.3V REF ACBUS4 32 R216 R217 ACBUS5 33 R16 R17 R18 ACBUS6 34 1K 1K 10K 10K 10K 63 ACBUS7 62 EECS 38 0 R203 DNL SCL_2 [Pg7] U2 61 EECLK BDBUS0 39 0 R204 DNL SDA_2
    [Show full text]
  • Structural and Functional Characterization of Neuraminidase
    Structural and functional characterization of SEE COMMENTARY neuraminidase-like molecule N10 derived from bat influenza A virus Qing Lia,b,1, Xiaoman Sunb,c,1, Zhixin Lib,c,1, Yue Liub, Christopher J. Vavrickab, Jianxun Qib, and George F. Gaoa,b,c,d,2 aSchool of Life Sciences, University of Science and Technology of China, Hefei 230027, China; bCAS Key Laboratory of Pathogenic Microbiology and Immunology, Institute of Microbiology, Chinese Academy of Sciences, Beijing 100101, China; cUniversity of Chinese Academy of Sciences, Beijing 100049, China; and dResearch Network of Immunity and Health, Beijing Institutes of Life Science, Chinese Academy of Sciences, Beijing 100101, China Edited by Peter Palese, Mount Sinai School of Medicine, New York, NY, and approved August 30, 2012 (received for review July 2, 2012) The recent discovery of the unique genome of influenza virus protein that is significantly divergent from other influenza NAs (7), H17N10 in bats raises considerable doubt about the origin and and thus whether N10 has special structural and/or functional evolution of influenza A viruses. It also identifies a neuraminidase features remains unknown. (NA)-like protein, N10, that is highly divergent from the nine other Here we report the crystal structure of the bat-derived influenza well-established serotypes of influenza A NA (N1–N9). The structural virus N10. Our findings demonstrate that N10 has a canonical elucidation and functional characterization of influenza NAs have sialidase fold but lacks sialidase activity. The dramatic changes in illustrated the complexity of NA structures, thus raising a key ques- the conserved active site residues relative to canonical influenza tion as to whether N10 has a special structure and function.
    [Show full text]
  • AC701 Evaluation Board for the Artix-7 FPGA User Guide (UG952)
    AC701 Evaluation Board for the Artix-7 FPGA User Guide UG952 (v1.4) August 6, 2019 DISCLAIMER The information disclosed to you hereunder (the “Materials”) is provided solely for the selection and use of Xilinx products. To the maximum extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same. Xilinx assumes no obligation to correct any errors contained in the Materials or to notify you of updates to the Materials or to product specifications. You may not reproduce, modify, distribute, or publicly display the Materials without prior written consent. Certain products are subject to the terms and conditions of Xilinx’s limited warranty, please refer to Xilinx’s Terms of Sale which can be viewed at https://www.xilinx.com/legal.htm#tos; IP cores may be subject to warranty and support terms contained in a license issued to you by Xilinx.
    [Show full text]