Hydraulic & Manual Tools
Hydraulic & Manual Tools
Flexible Busbar and Copper Busbar Manipulation and Transformation Solutions
nVent.com/ERIFLEX | 1 2 | nVent.com/ERIFLEX TABLE OF CONTENTS
HYDRAULIC TOOLS
Hydraulic Busbar & nVent ERIFLEX Flexibar Work Center...... 04
Hydraulic Busbar & nVent ERIFLEX Flexibar Puncher...... 08
Hydraulic Busbar & nVent ERIFLEX Flexibar Puncher Accesories...... 09
Crimping Tool for Hydraulic Puncher...... 10
Hydraulic Busbar & nVent ERIFLEX Flexibar Bender...... 11
Hydraulic Busbar Cutter...... 12
Hydraulic nVent ERIFLEX Flexibar Shearing Tool...... 13
MANUAL TOOLS
Manual nVent ERIFLEX Flexibar Work Center...... 14 nVent ERIFLEX Flexibar Folding Tool MFF...... 17 nVent ERIFLEX Flexibar Bending Tool HFBT...... 20 nVent ERIFLEX Flexibar Shearing Tool, Bending Tool, Twisting Tool...... 22 nVent ERIFLEX Flexibar Drilling Tool, Tripping Tool, Stripping Knife...... 23 nVent ERIFLEX Flexibar Punching Tool & Accessories...... 24 nVent ERIFLEX Flexibar Small Bending & Folding Tool, Braid & Crimp...... 25
Din Profiles Cutting & Punching Tool...... 26
Cross Reference...... 27
nVent.com/ERIFLEX | 3 Hydraulic Busbar & nVent ERIFLEX Flexibar Work Center
Hydraulic Busbar Cutter
Hydraulic Busbar & Flexibar Puncher
4-Ways Directional Valve
4 | nVent.com/ERIFLEX Programmable Angle Controller
Hydraulic Busbar Bender
“V” bending “Z” bending Straighten
Flexibar Shearing Tool*
Hydraulic Pump & Foot Controller
*Not including in the European Workcenter
nVent.com/ERIFLEX | 5 Hydraulic Busbar & nVent ERIFLEX Flexibar Work Center
3 table extensions
Stainless steel top table
Scrap storage 2 handles
Door with locks
Calibrated gauge and stop 4 drawers
Strong structure
HYDRAULIC BUSBAR & FLEXIBAR WORK CENTER • Mobile workbench including machines for Cutting, Bending and Punching Copper Busbars or Flexibar • This set is composed of: – Hydraulic Punch for Solid Bar & Flexibar (Punches and dies not included) – Hydraulic Busbar & Flexibar Bender 200 x 12,7 mm (8" x 1/2") with lift to adjust the machine level – Hydraulic Busbar Cutter 125 x 12,7 mm (5" x 1/2") – Hydraulic Pump 700 Bars & Foot Controller – Machine selector: 4-way directional valve to select the required machine – 2 Ejection Stop (without punch & die set) – Programmable Angle Controller – Protected by Circuit Breaker – 4 Drawers to put away accessories – Power cable 6 m long • One hydraulic hose, free to connect additional tools (Flexibar Shearing tool or other)
EVERY TOOL CAN BE PURCHASED SEPARATELY - SEE PAGE 8-13
6 | nVent.com/ERIFLEX Large working surface for operations
Engraved table for measurements
Door with locks
Forklift rail
Additional hydraulic hose & 6 m long power cable
Directional and locking wheels
Electrical panel control with circuit breaker
1380mm
Article No Description
Hydraulic Busbar & Flexibar Work 1465mm 545650 Center - 230V 1 356 kg (Flexibar Shearing Tool not included) 1465mm
Hydraulic Busbar & Flexibar Work 857 545720 Center - 115V 1 lbs (Flexibar Shearing Tool included)
770
nVent.com/ERIFLEX | 7 Hydraulic Busbar & nVent ERIFLEX Flexibar Puncher
• Copper or Aluminium Busbar & Flexibar • Maximum Capacity – Throat depth: 130 mm (5") – Maximum thickness of bar: 12,7 mm (1/2") • Maximum working hydraulic pressure: 700 bars (10,000 PSI) • Strong mechanical construction • Quick set up punches & dies system • Flat and clean hole edge • Punch pip to adjust the hole position • Calibrated side and depth gauge and stop • Large range of punches and dies available from 6,5 to 20 mm (5/16 - 8/16") + oval • Working position: Horizontal, 45°, 90° (when installed on the Work Center)
1. QUICK SET-UP – NO TOOL REQUIRED 2. MAXIMUM CAPACITY THROAT DEPTH: 130 MM
ø 6,5 ø 14
130
3. THREE POSITIONS 4. ROUND & OVAL HOLES
0° 45° 90°
90˚ available on work center only. If Puncher is purchased separately, only two positions available: 0° and 45°
120mm PUNCHING MACHINE
Article No Description 545680 Puncher 1 54.00 kg 470mm
305mm
8 | nVent.com/ERIFLEX Hydraulic Busbar & nVent ERIFLEX Flexibar Puncher Accesories
1. 3.
6. 4. 5. 8. 2. 5. 7.
METRIC SIZES ROUND HOLES Ejection Stop Article N° Punch (fig. 1) Article N° Die (fig. 2) Article N° (fig. 5) 545800 6,5 mm 1 0.13 kg 545801 6,5 mm 1 0.19 kg 545893 6,5-9-11-14 1 0.550 kg 545805 9 mm 1 0.14 kg 545806 9 mm 1 0.18 kg 545893 6,5-9-11-14 1 0.550 kg 545810 11 mm 1 0.14 kg 545811 11 mm 1 0.17 kg 545893 6,5-9-11-14 1 0.550 kg
545815 14 mm 1 0.16 kg 545816 14 mm 1 0.16 kg 545893 6,5-9-11-14 1 0.550 kg
545820 18 mm 1 0.24 kg 545821 18 mm 1 0.13 kg 545894 18-20 1 0.280 kg
545825 20 mm 1 0.25 kg 545826 20 mm 1 0.11 kg 545894 18-20 1 0.280 kg
METRIC OVAL HOLES (PUNCHES AND DIES FOR IMPERIAL OVAL HOLES AND SLOTS AVAILABLE ON REQUEST)
Ejection Stop Article N° Punch (fig. 3) Article N° Die (fig. 4) Article N° (fig. 5) 545850 6,5x13 mm 1 0.14 kg 545851 6,5x13 mm 1 0.15 kg 545893 6,5-9-11-14 1 0.550 kg 545855 9x18 mm 1 0.22 kg 545856 9x18 mm 1 0.12 kg 545894 18-20 1 0.280 kg 545860 11x20 mm 1 0.24 kg 545861 11x20 mm 1 0.1 kg 545894 18-20 1 0.280 kg
545865 14x20 mm 1 0.24 kg 545866 14x20 mm 1 0.1 kg 545894 18-20 1 0.280 kg
IMPERIAL SIZES ROUND HOLES
Ejection Stop Article N° Punch (fig. 1) Article N° Die (fig. 2) Article N° (fig. 5) 5/16" Punch - 5/16" Die - 545950 1 0.13 kg 545951 1 0.19 kg 545893 6,5-9-11-14 1 0.550 kg 1/4" Bolt 1/4" Bolt 3/8" Punch - 3/8" Die - 545955 1 0.14 kg 545956 1 0.18 kg 545893 6,5-9-11-14 1 0.550 kg 5/16" Bolt 5/16" Bolt
17/32" Punch 17/32" Die - 545960 1 0.16 kg 545961 1 0.16 kg 545893 6,5-9-11-14 1 0.550 kg - 7/16" Bolt 7/16" Bolt
9/16" Punch - 9/16" Die - 545965 1 0.16 kg 545966 1 0.16 kg 545893 6,5-9-11-14 1 0.550 kg 1/2" Bolt 1/2" Bolt
REPLACEMENT EJECTION STOP SPARE PARTS
Article No Description (fig. 8) Article No Description
545895 Ejection stop 6.5-9-11-14 1 0.66 kg 545900 Punch Holder 6,5-9-11-14 (fig. 6) 1 0.55 kg
545896 Ejection stop 18-20 1 0.058 kg 545905 Punch Holder 18-20 (fig. 6) 1 0.48 kg 545910 Die Holder (fig. 7) 1 1.60 kg
nVent.com/ERIFLEX | 9 Crimping Tool for Hydraulic Puncher
This package allows to crip lugs PB16, PB25, PB 50 on braids with hydraulic puncher, and allows to make your own grounding braid.
FEATURES SPECIFICATIONS
• Crimps PB lugs on braids using the Hydraulic Flexibar and Part Number HTC3-4 Busbar Puncher Article Number 545980 • Crimps braids and lugs flat and to a consistent thickness Material Steel • Kit includes one punch and two dies to accommodate all PB Unit Weight 1,85 kg lug sizes EAC 8462399100 • Quick and easy setup without tools Certifications (Russian Federation) RoHS Standard Packaging 1 pc • RoHS compliant Quantity UPC 78285687540 EAN-13 3479775459806
BRAIDS AND LUGS TO USE
BRAIDS LUGS
Section A B C Article No Description mm2 mm Article No Description mm mm mm 557240 FTCB 15-16 16 15x1.5 557180 PB 16 16 15 1 557260 FTCB 15-25 25 23x1.5 557190 PB 25 22 25 1 557300 FTCB 15-50 50 28x3 557380 PB 50 30 30 1
10 | nVent.com/ERIFLEX Hydraulic Busbar & nVent ERIFLEX Flexibar Bender
• Copper or Aluminium & Flexibar • Maximum capacity copper cross section 2000 mm² • Maximum bar width: 200 mm (8") • Maximum bar thickness: 12,7 mm (1/2") • Bending radius: 12,5 mm / 1/2" • Adjustable angle up to 100° • Bending accessories for copper or aluminium busbar & Flexibar • +/-2° angle precision
1. ONE MACHINE / THREE FUNCTIONS: QUICK SET-UP Article No Description 545670 Busbar bender 1 51 kg +/- 2°
500mm
“V” bending “Z” bending Straighten
2. LARGE CAPACITY: 2000 MM2 / 200 X 10 MM 261mm (8" X 3/8") 230mm
3. EASY ACCESS ALLOWING NUMEROUS BENDING POSSIBILITIES
4. LARGE WORKING SURFACE 5. BAR SUPPORT FOR BENDING OPERATION (OUT OF THE WORK CENTER)
nVent.com/ERIFLEX | 11 Hydraulic Busbar Cutter
• Copper or Aluminium Busbar • Maximum Capacity • Maximum bar width: 125 mm (5") • Maximum bar thickness: 12,7 mm (1/2") • Blade 7 mm thick • Strong mechanical construction: Guiding system 286mm 2 columns • Flat and clean cut edge • Visual inspection of cutting position 395mm • Transparent finger protection • Easy access for blade maintenance
Article No Description 545690 Hydraulic Busbar Cutter 1 41 kg
240mm 545695 Hydraulic Busbar Cutter Blade 1 1 kg
Tool Ruler
• In combination with hydraulic busbar cutter (545690) to support the solid bar • Calibrated end stop (1 m)
1000mm 128mm
Article No Description 285mm 558990 Tool ruler HFST-R 1 10 kg
Hydraulic Pump & Foot Controller
HYDRAULIC PUMP • One hose attached with quick release coupler • Oil type (545706) • Tank capacity from 1.9 up to 3.8 liter • Oil flow 0,2 L per minute • 700Bars/370Watts FOOT CONTROLLER • 2 control pedals control • 3 positions foot controller operation: off, on, safety off
Article No Description 545700 Electro Hydraulic Pump 230 V + Foot Controller 1 40 kg 545701 Electro Hydraulic Pump 115 V + Foot Controller 1 40 kg
545706 Hydraulic oil 0,946 liter 1 1 kg
12 | nVent.com/ERIFLEX Hydraulic nVent ERIFLEX Flexibar Shearing Tool
• Copper or Aluminium • Strong mechanical construction • Cuts quickly and accurately without burrs or deformation • Visual inspection of cutting position
280mm • Maximum Capacity Copper cross section 1200 mm² • Width of bar: 120 mm (4-3/4") • Thickness of bar: 12 mm (1/2")
341mm • Flexibar 10 x 120 x 1 maximummaximum
WARNING: Cutting solid bars will damage the tool
Article No Description
240mm 559010 Hydraulic shearing tool HFST 1 34 kg 10 559040 Tool blades HFST-C 1 1 kg 120 nVent ERIFLEX Flexibar Shearing Tool Guide
• Adjust the Flexibar position in the tool quick set up - No tool required • Increases blade life expectancy
Article No Description 559020 Tool Guide HFST-B 1 1 kg
244mm
73mm
76mm
nVent.com/ERIFLEX | 13 Manual nVent ERIFLEX Flexibar Work Center
14 | nVent.com/ERIFLEX nVent.com/ERIFLEX | 15 Manual nVent ERIFLEX Flexibar Work Center (MFWC) MODULAR TABLE FOR FLEXIBAR MANUAL TOOLS
FEATURES
• Modular table with large work surface and storage for manual Flexibar tools • Tools can be fixed directly to interchangeable tiles, allowing tools to be quickly moved from one level to another • Non-slip bakelite coated plywood tiles fix into place with wing knobs included • Includes Flexibar Small Bending and Folding Tool • Forklift rail, locking directional wheels and built-in handles provide easy mobility • Built-in handle is extendable to accommodate long pieces of Flexibar
SPECIFICATIONS
Part Number MFWC Article Number 558940 Unit Weight 95 kg Certifications RoHS Standard Packaging Quantity 1 pc
16 | nVent.com/ERIFLEX nVent ERIFLEX Flexibar Folding Tool MFF
• Flexibar folds up to 10x120x1/12x100x1 • Folds quickly without insulation damage • Multiple bending shapes: L - U - Z • Easy to produces many shapes and sizes • Significantly reduces Flexibar scrap • Limits heavy Flexibar handling • Quick and easy tool set up • Universal tool for workshop or jobsite • For Flexibar only
Article No Description 558930 Flexibar Folding Tool MFF 1 20 kg
FLEXIBAR FOLDING PROCESS Overall dimensions: L 600 x W 305 x H 305 mm
L Shape Tool (s) to Use
Z Shape 558930 x1
U Shape Tool (s) to Use 558930 x1 558931 x1
FLEXIBAR LONG & LARGE QUANTITIES
L + Z Shape Tool to Use L Z
558930 x1 x2
558932 x2 x1
558933 x2 x1 L + U Shape Tool (s) to Use L V 558930 x1 x1
558931 x1
558932 x2 x2
558933 x2 x2
nVent.com/ERIFLEX | 17 nVent ERIFLEX Flexibar Folding Tool
FLEXIBAR FOLDING TOOL U-SHAPE - MFFU • Accessory to the MFF tool • Use with the MFF tool for U-shape folding
Overall dimensions: L 355 x W 305 x H 205 mm
Article No Description Flexibar Folding 558931 1 9 kg Tool U-Shape MFFU
FLEXIBAR FOLDING TOOL FIXED VICE - MFFV • Accessory to the MFF tool • Supports long Flexibar • Allows easy folding of long Flexibar
Overall dimensions: L 170 x W 125 x H 205 mm
Article No Description Flexibar Folding 558932 1 2,2 kg Tool Fixed Vice MFFV
FLEXIBAR FOLDING TOOL RAIL - MFFR • Accessory to the MFF tool • Assists with the assembly of the MFF and MFFU tools for long Flexibar • Fix the folding tool to the workbench or vice
Overall dimensions: L 600 x W 100 x H 120 mm
Article No Description
558933 Flexibar Folding Tool Rail MFFR 1 6,4 kg
18 | nVent.com/ERIFLEX nVent ERIFLEX Flexibar Folding Tool
FLEXIBAR FOLDING TOOL CLAMP - MFFC • Accessory to the MFF tool • Prevents any Flexibar laminates from sliding during the folding operation • Allows for quality palms on Flexibar ends • Helps with insulation stripping on large Flexibar sizes
Overall dimensions: L 240 x W 50 x H 50 mm
Article No Description Flexibar
558934 Flexibar Folding Tool Clamp 63 MFFC 20 -> 63 2 0,45 kg
558935 Flexibar Folding Tool Clamp 120 MFFC 20 -> 120 2 0,535 kg
nVent.com/ERIFLEX | 19 nVent ERIFLEX Flexibar Bending Tool HFBT
• Flexibar bends up to 10x120x1/12x100x1 • Bends quickly without insulation damage • Limits heavy Flexibar handling • Universal tool for workshops or jobsites • Angle adjustment up to 180° • Bending radius: 10 mm • Compact tool in steel case
Article No Description 558920 Flexibar Bending Tool 1 7 kg
On Workbench
On Jobsite
Tool Capability
100 mm minimum
100 mm “x”
20 | nVent.com/ERIFLEX nVent ERIFLEX Flexibar Manual Tools
A COMPLETE RANGE OF USEFUL HAND TOOLS FOR FLEXIBAR, BRAIDS AND DIN PROFILES Cutting, bending, drilling, twisting: nVent ERIFLEX offers a complete manual tool range.
TWISTING TOOL STRIPPING TOOL SHEARING TOOL BENDING TOOL
EVERY TOOL CAN BE PURCHASED SEPARATELY
FLEXIBAR WORKBENCH
A COMPLETE SET OF USEFUL HAND TOOLS FOR FLEXIBAR.
A. Cutting tool – Specifically designed for cutting Flexibar up to 5x32 cm B. Stripping tool – Cut all 4 sides of insulation in one operation without marking the copper. C. Bending tool – Simple hand operated bending tool. Does not damage insulation. D. Twisting tool – Used in conjunction with bending tool. This simple tool facilitates plane change
Overall dimensions: L 500 x W 500 x H 290 mm E. Cutter – Stripping knife with interchangeable blades Article No Description F. Instruction 559149 Workbench - MFTK 1 35 kg – Clear instruction sheet for the use of the tools.
nVent.com/ERIFLEX | 21 nVent ERIFLEX Flexibar Manual Tools
SHEARING TOOL • Cuts quickly and accurately without burrs or deformation • Cuts with the insulation on – without any damage • Graduated endstop • Cost-effective • Spare blade MFCB Shearing Capacity
Article No Description MFSHT-2 Flexibar Manual 559146 1 6 kg Shearing Tool max 5mm 559147 Replacement Blades for MFSH 1 0.5 kg max 32mm Flexibar 5 x 32 x 1 maximum WARNING: Cutting solid bars will damage the tool
BENDING TOOL
• Bends quickly without insulation damage • Manual saw guide included • Adjustable angle up to 120° • Bending radius: 5 mm • Maximum capacity: Flexibar 10 x 100 x 1
Overall dimensions: L 170 x I 150 x H 220 mm
Article No Description MFBT-2 Flexibar 559145 1 7 kg Manual Bending Tool
TWISTING TOOL
• Unlimited possibilities of twisting or changing plane. Designed to be used with the bending tool
Overall dimensions: L 560 x I 150 x H 70 mm
Article No Description 120mm max. MFTT-2 nVent ERIFLEX Flexibar 559148 1 2.5 kg Manual Twisting Tool
22 | nVent.com/ERIFLEX nVent ERIFLEX Flexibar Manual Tools
NVENT ERIFLEX FLEXIDRILL DRILL GUIDE
• Multi-diameter, multi-distance between centers. • This guide facilitates the drilling of one or more holes of various diameters at different distances between centers. • Drill guide inserts: – 6,5 mm / 8,5 mm / 10,5 mm / 12,5 mm (558600) – 5/16" Die Set - 1/4" Bolt, 3/8" Die Set - 5/16" Bolt, 17/32" Die Set - 7/16" Bolt, 9/16" Die Set - 1/2" Bolt (558601)
Overall dimensions: L 560 x I 150 x H 70 mm
Article No Description 558600 nVent ERIFLEX Flexidril 1 9.5 kg 558601 nVent ERIFLEX Flexidril Imperial 1 9.5 kg
STRIPPING TOOL
• Quick & simple stripping of Flexibar from 9 up to 120 mm • Cuts all of 4 faces of the insulation in a single operation without damaging the copper. • Allows stripping on short length • Aluminium cast body, four holes for fixing
Overall dimensions: L 220 x W 100 x H 250 mm
Article No Description Minimum 10 mm 559143 MFST-2 Flexibar Stripping Tool 1 8 kg MFST-2 Flexibar 559144 1 1 kg Stripping Tool Blade Set
STRIPPING KNIFE
• Accurately cuts the Flexibar insulation • Special sharpening to avoid damaging the conductors • Highly resistant blade, interchangeable • Blade protection • Ergonomic shockproof resin handle
Article No Description 559050 Stripping knife - SOK 1 0.062 kg 559060 Spare blade for SOK 1 0.020 kg
nVent.com/ERIFLEX | 23 nVent ERIFLEX Flexibar Manual Tools
PUNCHING TOOL & ACCESSORIES
• Works with copper or aluminium busbar and Flexibar • Punches flat and clean hole edges • Accurately punches Flexibar in a single operation without marking the copper laminates • Quick and easy installation • Quick setup with interchangeable punch and die system • Large range of round punches and dies available • Includes adjustable throat depth stop • Removable handle • Portable tool can be used on the jobsite or attached to a workbench • RoHS compliant
Article Part Busbar No Number thickness Depth Height Width 559152 MFPT 6 mm Max 240 mm 450 mm 110 mm 15.1 kg
PUNCHING TOOL & ACCESSORIES
• For use with MFPT Flexibar Punching Tool • Kit includes one punch, one die, and one ejection stop • Quick and easy installation • RoHS compliant
Screw Article No Description Punch Size Diameter 559153 MFPTPD-M6-14 7.0 mm M6,1/4" 0.15 kg 559154 MFPTPD-M8 9.0 mm M8 0.15 kg 559155 MFPTPD-M10-38 11.0 mm M10, 3/8" 0.15 kg 559156 MFPTPD-M12-12 13.0 mm M12, 1/2" 0.15 kg
24 | nVent.com/ERIFLEX nVent ERIFLEX Flexibar Manual Tools
FLEXIBAR SMALL BENDING AND FOLDING TOOL
• Used to ease the process of bending, folding or twisting of Flexibar
Article No Description 558945 SFBF 1 5.1 kg
MHYFSHT MANUAL HYDRAULIC FLEXIBAR SHEARING TOOL
• Cuts Flexibar quickly and accurately without burrs or deformation • Cuts through the insulation without damaging it • Works with all sizes of Flexibar • Integrated handles allow for easy portability • Works without electrical or hydraulic power • Includes two brackets for mounting to workbench • Strong mechanical assembly • Replacement blade available • RoHS compliant
Article No Description MHYFSHT - Manual Hydraulic 559151 1 29 kg Flexibar Shearing Tool
nVent.com/ERIFLEX | 25 nVent ERIFLEX Flexibar Manual Tools
BRAID & CRIMP DRILL TOOL
• BD - Crimp & Braid Drill Tool – Comprised of a guide and adapted drill bit. BD – For crimping and drilling of braid terminals Comprise. • PB Lugs for Flat Braids – Tinned annealed copper
PB Article No Description Bolts 558610 BD 16 - 6,5 M6 1 0.653 kg 558640 BD 16 - 8,5 M8 1 0.653 kg B 558620 BD 25 - 11 M10 1 0.678 kg A 558630 BD 50 - 12,5 M12 1 0.712 kg
Article No Description For Flat Braid A X B 557180 PB 16 FTCB or FRCB 15-16 16 x 15 100 0.004 kg 557190 PB 25 FTCB or FRCB 15-25 22 x 25 100 0.010 kg 557380 PB 50 FTCB or FRCB 15-50 30 x 30 100 0.017 kg
CUTTING & PUNCHING TOOL FOR DIN PROFILES
• Punches slots and cuts DIN rail without burrs or deformation Punches horizontal and vertical slots Works with five different types of DIN rail and M6 threaded rod Includes ruler, guide and end stops RoHS compliant
Overall dimensions: L 165 x W 100 x H 200 mm Lever: 630 mm
Article No Description 559142 DIN rail Cutter 1 13 kg
26 | nVent.com/ERIFLEX Manual Tool Product
Art. No. Description Page Art. No. Description Page Hydraulic Busbar & Flexibar Work Center - 557190 PB 25 10 545650 7 230V 557380 PB 50 10 Hydraulic Busbar & Flexibar Work Center - 545720 7 545670 Busbar bender 11 115V 558990 Tool ruler HFST-R 12 545680 Puncher 8 Electro Hydraulic Pump 230 V + Foot 545800 6,5 mm punch 9 545700 12 Controller 545801 6,5 mm die 9 Electro Hydraulic Pump 115 V + Foot 545701 12 545893 6,5-9-11-14 Ejection Stop 9 Controller 545805 9 mm punch 9 545706 Hydraulic oil 0,946 liter 12 545806 9 mm die 9 545690 Hydraulic Busbar Cutter 12 545810 11 mm punch 9 545695 Hydraulic Busbar Cutter Blade 12 545811 11 mm die 9 559010 Hydraulic shearing tool HFST 13 545815 14 mm punch 9 559040 Tool blades HFST-C 13 545816 14 mm die 9 559020 Tool Guide HFST-B 13 545820 18 mm punch 9 558930 Flexibar Folding Tool MFF 17 545821 18 mm die 9 558932 Flexibar Folding Tool Fixed Vice MFFV 18 545894 18-20 Ejection Stop 9 558931 Flexibar Folding Tool U-Shape MFFU 18 545825 20 mm punch 9 558933 Flexibar Folding Tool Rail MFFR 18 545826 20 mm die 9 558934 Flexibar Folding Tool Clamp 63 MFFC 19 545850 6,5x13 mm punch 9 558935 Flexibar Folding Tool Clamp 120 MFFC 19 545851 6,5x13 mm die 9 558920 Flexibar Bending Tool 20 545855 9x18 mm punch 9 559149 Workbench - MFTK 21 545856 9x18 mm die 9 559146 MFSHT-2 Flexibar Manual Shearing Tool 22 545860 11x20 mm punch 9 559147 Replacement Blades for MFSH 22 545861 11x20 mm die 9 559145 MFBT-2 Flexibar Manual Bending Tool 22 545865 14x20 mm punch 9 MFTT-2 nVent ERIFLEX Flexibar Manual 559148 22 Twisting Tool 545866 14x20 mm die 9 558600 nVent ERIFLEX Flexidril 23 545950 5/16" Punch - 1/4" Bolt 9 558601 nVent ERIFLEX Flexidril Imperial 23 545951 5/16" Die - 1/4" Bolt 9 559143 MFST-2 Flexibar Stripping Tool 23 545955 3/8" Punch - 5/16" Bolt 9 559144 MFST-2 Flexibar Stripping Tool Blade Set 23 545956 3/8" Die - 5/16" Bolt 9 559050 Stripping knife - SOK 23 545960 17/32" Punch - 7/16" Bolt 9 559060 Spare blade for SOK 23 545961 17/32" Die - 7/16" Bolt 9 559153 MFPTPD-M6-14 24 545965 9/16" Punch - 1/2" Bolt 9 559154 MFPTPD-M8 24 545966 9/16" Die - 1/2" Bolt 9 559155 MFPTPD-M10-38 24 545895 Ejection stop 6.5-9-11-14 9 559156 MFPTPD-M12-12 24 545896 Ejection stop 18-20 9 558945 SFBF 25 545900 Punch Holder 6,5-9-11-14 9 MHYFSHT - Manual Hydraulic Flexibar 545905 Punch Holder 18-20 9 559151 25 Shearing Tool 545910 Die Holder 9 558610 BD 16 - 6,5 26 557240 FTCB 15-16 10 558640 BD 16 - 8,5 26 557260 FTCB 15-25 10 558620 BD 25 - 11 26 557300 FTCB 15-50 10 558630 BD 50 - 12,5 26 557180 PB 16 10 559142 DIN rail Cutter 26
nVent.com/ERIFLEX | 27 Our powerful portfolio of brands: CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
nVent.com/ERIFLEX
©2020 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. ERIFLEX-CAT-P1356B-HydraulicManualTools-UKEN-2004
28 | nVent.com/ERIFLEX