Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021

Kitemark Court Sales Enquiry Tel: +44 (0)845 080 9000 Davy Avenue Fax: +44 (0)1908 228060 Knowlhill Sales Enquiry Email: [email protected] 0003 Milton Keynes BSI Website: www.bsigroup.com Accredited to MK5 8PP Regulatory Contact: Maria Crane ISO/IEC 17065:2012 to provide product Tel: +44 (0)1908 814724 conformity certification Email: [email protected]

Locations where certification activities covered by the above Accreditation Standard are undertaken

Kitemark Court Kitemark House Davy Avenue Maylands Avenue Knowlhill Hemel Hempstead Milton Keynes Hertfordshire MK5 8PP HP2 4SQ UNITED KINGDOM UNITED KINGDOM

Holywell Park Room 1006-1011,10/F Ashby Road Ciro’s Plaza Loughborough 388 Nanjing W. RD Leicestershire Shanghai 200003 LE11 3AQ PR CHINA UNITED KINGDOM

Say Building Suite 208 John M. Keynesplein 9, 4th floor Sultan Business Centre 1066 EP PO Box 49400 Amsterdam Dubai NETHERLANDS UNITED ARAB EMIRATES

210 Amarande Avenue Regus Business Park Menlyn Maine Waterkloof Ext 2 0181 SOUTH AFRICA

Flexible Scope

This Certification Body is additionally accredited to develop and add additional product standards within the highlighted product areas, having demonstrated competence in their design and development process for these areas.

Assessment Manager: WC1 Page 1 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

DETAIL OF ACCREDITATION

Product Standard

CONSTRUCTION

Timber

Structural timber BS EN 519:1995

Particle board BS EN 312:2003

Fibre building boards BS EN 622-4:1997

Windows – wood BS 644-1:1989

Street Furniture

Gully tops and manhole tops for vehicular and BS EN 124:1994 pedestrian areas

Drainage Channels for vehicular and pedestrian areas BS EN 1433:2002

Road & Road Marking Materials

Road marking materials BS EN 1871:2000

Sharps Containers

Single-use Sharps Containers - Sharps Injury BS EN ISO 23907-1: 2019 protection – Requirements and Test Methods

Assessment Manager: WC1 Page 2 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Plastic Pipes and Fittings

Plastic Piping systems for water supply - Unplasticised BS EN 1452-1:2000 poly (vinylChloride) (PVC-U) Part 1 - General

Part 2 – Pipes BS EN 1452-2:2000 BS EN ISO 1452-2:2009

Part 3 – Fittings BS EN 1452-3:2000 BS EN ISO 1452-3:2009

Part 5 - Fittings for purpose of the system BS EN 1452-5:2000

Cold water storage and combined feed and expansion BS 4213:2004 cisterns (polyolefin or olefin copolymer) up to 500l capacity used for domestic purposes

Thermoplastics pipes and associated fittings for hot BS 7291-1:2006 and cold water for domestic purposes and heating BS 7291-1:2010 installations in buildings part 1. General requirements

Thermoplastics pipes and associated fittings for hot BS 7291-2:2006 and cold water for domestic purposes and heating BS 7291-2:2010 installations in buildings part 2. Specification for polybutylene (pb) pipes and associated fittings.

Thermoplastics pipes and associated fittings for hot BS 7291-3:2006 and cold water for domestic purposes and heating BS 7291-3:2010 installations in buildings part 3. Specification for crosslinked polyethylene (pe-x) pipes and associated fittings

Buried polyethylene (PE) Pipes for water supply - ISO 4427 Pt 12-15:1996 Specifications First Edition BS ISO 4427-2:2007

Assessment Manager: WC1 Page 3 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Plastic Pipes and Fittings (cont’d)

Plastics piping systems for water supply and for BS ISO 4427-1: 2019 drainage and sewerage under pressure. Polyethylene (PE). General

Plastics piping systems for water supply, and for BS ISO 4427-2: 2019 drainage and sewerage under pressure. Polyethylene (PE). Pipes

Plastics piping systems for water supply, and for BS ISO 4427-3: 2019 drainage and sewerage under pressure. Polyethylene (PE). Fittings

Plastics piping systems for water supply, and for BS ISO 4427-5: 2019 drainage and sewerage under pressure. Polyethylene (PE). Fitness for purpose of the system

Buried polyethylene (PE) Pipes for the supply of ISO 4437:1997 gaseous fuels. Metric series - specifications BS ISO 4437-2:2014

Plastics piping systems for the supply of gaseous BS ISO 4437-2:2014 fuels. Polyethylene (PE). Pipes BS EN 1555-2:2010

Plastics piping systems for the supply of gaseous BS ISO 4437-3:2014 fuels. Polyethylene (PE). Fittings BS EN 1555-3:2010 + A1:2012

Polyethylene pipes and fittings for natural gas and GIS/PL2-2:2016 suitable manufactured gas Part 2: Pipes for use at pressures up to 5.5 bar.

Polyethylene pipes and fittings for natural gas and GIS/PL2-4:2019 suitable manufactured gas Part 4: Fusion fittings with integral heating element(s).

Assessment Manager: WC1 Page 4 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Polyethylene pipes and fittings for natural gas and GIS/PL2-6:2018 suitable manufactured gas Part 6: Spigot end fittings for electrofusion and/or butt fusion purposes.

Polyethylene pipes and fittings for natural gas and GIS/PL2-8:2014 suitable manufactured gas Part 8: Pipes for use at pressures up to 7 bar.

Polyethylene water pipes BS EN 12201-2:2003

Plastics piping systems for non-pressure underground BS EN 1401-1:2019 drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system

Plastic piping systems for soil and waste discharge BS EN 1329-1:2014 + A1:2018 (low and high temperature) within the building structure. Unplasticized poly (vinyl chloride) (PVC-U) Specifications for pipes, fittings and the systems.

Assessment Manager: WC1 Page 5 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Plastic Windows and Doors

Plastic windows made from PVC-U extruded hollow BS 7412:2002 profiles

White PVC-U extruded hollow profiles with heat BS EN 12608:2003 (Previously BS 7413) welded corner joints for plastics windows: Materials Type Ae

Insulation

Thermal Insulating Products - Factory made mineral BS EN 13162:2012 + A1:2015 wool BS EN 14303:2009 + A1:2013

Thermal Insulating Products - Factory made products BS EN 13163:2001 of expanded polystyrene

Thermal Insulating Products - Factory made products BS EN 13164:2001 of extruded polystyrene foam

Thermal Insulating Products - Factory made rigid BS EN 13165:2001 polyurethane foam

Thermal Insulating Products - Factory made products BS EN 13166:2001 of phenolic foam

Thermal Insulating Products - Factory made cellular BS EN 13167:2001 glass

Thermal Insulating Products - Factory made wood BS EN 13168:2001 wool products

Thermal Insulating Products - Factory made products BS EN 13169:2001 of expanded perlite

Assessment Manager: WC1 Page 6 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Insulation (cont’d)

Thermal Insulating Products - Factory made products BS EN 13170:2001 of expanded cork

Thermal Insulating Products - Factory made wood fibre BS EN 13171:2008

Glass

Ballitini (glass beads) BS EN 1423:1998 and BS EN 1424:1998

Insulating Glass Units BS EN 1279-2 & BS EN 1279-3:2002

Clay/Ceramic

Clay pavers BS EN 1344:2002

Clay masonry units BS 3921:1985 and BS EN 771-1:2011 + A1:2015

Roof tiles and fittings – clay BS EN 1304:2005

Slate/Stone

Roofing slates BS 680-1:1994 BS EN 12326-1 and BS EN 12326-2:2004

Cast stone BS 1217:1997

Reconstructed stone masonry units BS 6457:1984

Assessment Manager: WC1 Page 7 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Cementitious

Portland - blast furnace cement BS EN 197-1:2000

Pozzolanic cement BS 6610:1996

Portland cement BS EN 197-1:2000

Portland - PFA cement BS EN 197-1:2000

Sulphate resisting Portland cement BS 4027:1996

Building Lime BS EN 459-1:2001

Pulverised fuel ash BS 3892-1:1997

Fly ash for concrete BS EN 450-1:2012

Rendering and Plastering Mortar BS EN 998-1:2003

Masonry Mortar BS EN 998-2:2016

Screed Materials and Floor Screeds BS EN 13813:2002

Cement RC - 03 Spanish Construction Regulations

Ready Mixed Concrete

Ready mixed concrete BS EN 206:2013 + A1:2016 BS 8500-1:2015 + A2:2019 BS 8500-2:2015 + A2:2019

Assessment Manager: WC1 Page 8 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Pre-cast Concrete

Precast aggregate concrete masonry units BS EN 771-3:2011 + A1:2015

Precast autoclaved concrete masonry units BS EN 771-4:2011 + A1:2015

Manufactured stone masonry units BS EN 771-5:2011 + A1:2015

Pre-cast Concrete Products - Box Culverts BS EN 14844:2006 + A2:2011

Pre-cast Concrete Products - Bean and Block Floor BS EN 15037-2:2009 + A1:2011 Systems. Concrete Blocks

Metal Windows and Doors

Windows - aluminium alloy BS 4873:2004

Patio doors – aluminium BS 5286:1978

Security/Fire Doors/Windows/Hardware

Windows and external pedestrian doorsets – BS EN 14351-1:2006 + A2:2016 Performance characteristics

Enhanced security performance requirements for PAS 24:2016 doorsets and windows

Emergency Exit Devices BS EN 179:1998

Panic Exit Devices BS EN 1125:1997

Determination of the fire resistance of non-loadbearing BS 476-22:1987 elements of construction

Assessment Manager: WC1 Page 9 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Security/Fire Doors/Windows/Hardware (cont’d)

Fire resistance test for door and shutter assemblies BS EN 1634-1:2014 and openable windows

Fire resisting and/or smoke control characteristics of BS EN 16034:2014 pedestrian doorsets, garage doors and openable windows

Wrought Metal

Copper tubes for water, gas and sanitation BS EN 1057:2006

ELECTRONIC COMPONENTS

Electronic Components BS 9000 and IECQ-CECC Scheme

MISCELLANEOUS

Rubber

Condoms - natural latex male BS EN 600:1996 BS EN ISO 4074:2015 BS EN ISO 23409:2011

Hot water bottles BS 1970:2001

Elastomeric seals. Material requirements for pipe joint BS EN 681-1:1996 seals used in water and drainage applications. Vulcanised rubber.

Additives & Sealants

Adhesives for Tiles BS EN 12004:2001

Assessment Manager: WC1 Page 10 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

FIRE SAFETY PRODUCTS & INSTALLATIONS

Fire Extinguishing

Fire Extinguishers BS EN 3-7:2004 + A1:2007 BS EN 3-10:2009 BS EN 1866-1:2007 BS 6165:2002

Fire Blankets BS EN 1869:1997

Fire Brigade Equipment BS 336:1989

Fire-Fighting Hoses – Non-percolating lay-flat hoses BS 6391:2009 for fixed systems BS EN 14540:2014

Fire-Fighting Hoses – Semi-rigid hoses for fixed BS EN 694:2014 systems

Fixed Fire Fighting Systems - Hose reels with BS EN 671-1:2012 semi-rigid hoses

Fixed Fire Fighting Systems - Hose systems with BS EN 671-2:2012 lay-flat hose

Fixed Fire Fighting Systems - Components for gas BS EN 12094-1:2003 extinguishing systems

Fixed Fire Fighting Systems – Gas extinguishing BS EN 15004-1: 2008 systems Fire testing to Annex C and verification of the design process to clauses 4, 5, 6, and 7 (Excluding Installation and Maintenance)

Assessment Manager: WC1 Page 11 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Fire Systems Equipment

Provision and Maintenance of Portable Fire BAFE Scheme: SP101-1 Version 1: April 2017 Extinguishers

Service & Maintenance of Dry & Wet Riser/Falling BAFE Scheme SP105 Version 1: April 2019 Installations

Design, Installation, Commissioning & Maintenance of BAFE Scheme: SP203-1 Version 7.1: May 2019 Fire Detection and Fire Alarm Systems

Design, Installation, Commissioning & Maintenance of BAFE Scheme: SP203-3 Version 2: February 2013 Fixed Gaseous Fire Suppression Systems

Design, Installation, Commissioning & Maintenance of BAFE Scheme: SP203-4 Version 1: June 2013 Emergency Lighting Systems

Design, Installation, Commissioning, Recharge & BAFE Scheme SP206 Version 0: January 2018 Maintenance of Kitchen Fire Protection Systems

Design, Installation, Commissioning & Maintenance of BAFE Scheme SP207 Version 1: July 2020 Evacuation Alert Systems

Fire Hydrant Systems Equipment BS 750:2006 BS 750:2012 (Clauses 1 to 13 only) BS 5041-1:1987 BS 5041-2:1987 BS 5041-3:1975

Fire Detection and Alarm Systems BS EN 54 all parts

Combustible Gas Detection Apparatus BS EN 50194:2000

Smoke Alarms BS EN 14604:2005

Assessment Manager: WC1 Page 12 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Fire Systems Equipment (cont’d)

Fire detection and alarm devices for dwellings: BS 5446-2:2003 Specification for heat alarms.

Smoke and heat control systems - Specification for BS EN 12101-3:2015 powered smoke and heat exhaust ventilators

Power, control and communication cables. Cables for BS EN 50575:2014 + A1:2016 general applications in construction works subject to reaction to fire requirements

Assessment Manager: WC1 Page 13 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

PERSONAL PROTECTIVE EQUIPMENT

Eye Protection

Eye protection for vehicle users BS 4110:1999

Eye protection – welding BS EN 175:1997

Eye protection – personal BS EN 166:2002

Eye protectors for motor cyclists and racing drivers AS 1609:1981

Welding filters BS EN 169:2002

Ultraviolet filters BS EN 170:2002

Infrared Filters BS EN 171:2002

Sun glare filters for industrial use BS EN 172:1995

Mesh face screens BS EN 1731:2006

High performance visors intended only for use with BS EN 14458:2018 protective helmets

Supplementary requirements for the testing and GS-ET-29 certification of face shields for electrical works

Assessment Manager: WC1 Page 14 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Hearing Protection

Hearing protection - Ear-muffs BS EN 352-1:2002

Hearing protection - Ear-plugs BS EN 352-2:2002

Hearing protection - Ear-muffs attached to an industrial BS EN 352-3:2002 safety helmet

Hand Protection

Gloves - General requirements BS EN 420:2003+A1:2009

Medical Gloves for single use BS EN 455-1:2000 BS EN 455-2:2009+A2:2013 BS EN 455-3:2015

Protective gloves – ionizing radiation and radioactive BS EN 421:2010 contamination

Protective Gloves – chemicals and micro organisms BS EN 374-1:2016 + A1:2018 BS EN 374-2:2014 BS EN 374-3:2003 BS EN 374-4:2013 BS EN 16523-1:2015

Protective gloves – Mechanical risks BS EN 388:2016 + A1:2018

Protective gloves – Firefighters BS EN 659:2003 +A1:2008

Protective gloves – Live working: Gloves of insulating BS EN 60903:2003 materials

Assessment Manager: WC1 Page 15 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Helmets

Helmets – Equestrian BS EN 1384:1997 BS EN 1384:2012 PAS 015:1995 PAS015:2011

Helmets - General purpose industrial safety BS EN 397:2012+A1:2012

Helmets – High performance industrial helmets BS EN 14052:2012+A1:2012

Helmets – Industrial Bump Caps BS EN 812:2012

Helmets - Pedal Cyclists and Users of Skateboards BS EN 1078:2012

Helmets - Head protectors for cricketers BS 7928:2013

Helmets – Airborne Sports BS EN 966:2012+A1:2012

Helmets – Alpine Skiers and Snowboarders BS EN 1077:2007

Helmets – Canoeing and white water sports BS EN 1385:2012

Helmets – Firefighting in buildings and other structures BS EN 443:2008

Helmets – Electrically insulating for use on low voltage BS EN 50365:2002 installations

Helmets - Vehicle users BS 6658:1985

Helmets - Police anti-riot PAS 017:1995

Assessment Manager: WC1 Page 16 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Helmets (cont’d)

Helmets - Mountaineering BS EN 12492:2012

Protective helmets for vehicle users BS 6658:1985 ASNZ 1698:2006 AS 1609-1981 BS 4110:1979 (withdrawn)

Protective Footwear

Protective Footwear - Firefighters BS EN 15090:2012

Protective footwear - Motorcycle riders BS EN 13634:2010

Personal Protective Equipment - Safety footwear BS EN ISO 20345:2011

Personal Protective Equipment - Protective footwear BS EN ISO 20346:2014

Personal Protective Equipment - Occupational BS EN ISO 20347:2012 footwear

Protective Clothing

High visibility clothing BS EN ISO 20471:2013 + A1:2016

Protective clothing against liquid and gaseous BS EN 943-1:2002 chemicals, aerosols and solid particles BS EN 943-1:2015 BS EN 943-2:2002 BS EN 943-2:2019

Protective clothing against radioactive contamination BS EN 1073-1:2016 + A1:2018 BS EN 1073-2:2002

Assessment Manager: WC1 Page 17 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Protective Clothing (Cont’d)

Protective Clothing against Electrostatic Risks BS EN 1149-5:2018

Respirators

Respirators - Filtering facepieces BS EN 149:2001+A1:2009

Respirators - Half masks and quarter masks BS EN 140:1999

Respirators - Full face masks BS EN 136:1998

Respirators - Particle filters BS EN 143:2000

Respirators - Gas filter(s) and combined filter(s) BS EN 14387:2004+A1:2008

Respirators - Powered filtering devices incorporating a BS EN 12941:1998+A2:2008 helmet or a hood.

Respirators - Power assisted filtering devices BS EN 12942:1998+A2:2008 incorporating full face masks, half masks or quarter masks

Self Contained Open-Circuit Compressed Air BS EN 1146:2005 Breathing Apparatus with Escape Hood

Self Contained Breathing Apparatus BS EN 137:2006

Continuous Flow Compressed Airline Breathing BS EN 14594:2005 Apparatus

Compressed air line breathing apparatus with demand BS EN 14593-1:2005 valve. Apparatus with a full mask.

Assessment Manager: WC1 Page 18 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Respirators (cont’d)

Compressed air line breathing apparatus with demand BS EN 14593-2:2006 valve. Apparatus with a half mask

Respiratory protective devices for self-rescue. Filtering BS EN 403:2004 devices with hood for escape

Respiratory equipment for use against chemical, BS 8468-1:2006 biological, radiological and nuclear (CBRN) agents – Positive pressure

Respiratory protective devices for use against BS 8468-2:2006 chemical, biological, radiological and nuclear (CBRN) agents – Negative pressure

Self-contained closed-circuit breathing apparatus for BS EN 13794:2002 escape

Personal Fall Protection Equipment

Descender Devices BS EN 341:2011

Work positioning belts BS EN 358:2018

Retractable type fall arresters BS EN 360:2002

Guided type fall arresters BS EN 353-1:2014 + A1:2017

Full Body Harnesses BS EN 361:2002

Connectors BS EN 362:2004

Assessment Manager: WC1 Page 19 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

Personal Fall Protection Equipment (cont’d)

Anchor points BS EN 795:2012

Sit harnesses BS EN 813:2008

Lanyards BS EN 354:2010

Energy absorbers BS EN 355:2002

Rescue and Lifting Devices BS EN 1496:2017

TELECOMMUNICATIONS

Total Metering and Billing Systems (TMBS) Ofcom Metering and Billing Direction - 2017

GENERAL HARDWARE

Thermostatic Radiator Valves CENMARK/KEYMARK BS EN 215

Metallic butterfly values for general purpose BS EN 593:2017

Steel and cast iron check valves BS EN 16767:2016

AUTOMOTIVE

Automotive Services BS 10125:2014 + A1:2016 Specification for vehicle damage repair processes

Assessment Manager: WC1 Page 20 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

TRUST SERVICE PROVISION

Accredited to ETSI EN 319 403 for the certification of Trust Service Providers including compliance with the relevant requirements of the eIDAS Regulation (EU) No. 910/2014 and in accordance with the current UK ICO guidance - Achieving ‘qualified status’ and ceasing to provide qualified trust services under the eIDAS Regulation and for the standards listed below.

Qualified certificate for electronic signature ETSI EN 319 401 V2.1.1 (2016-02) (Article 28 of the eIDAS Regulation, (EU) No. ETSI EN 319 411-1 V1.1.1 (2016-02) 910/2014 – refers) ETSI EN 319 411-2 V2.1.1 (2016-02)

Qualified certificate for electronic seal ETSI EN 319 401 V2.1.1 (2016-02) (Article 38 of the eIDAS Regulation, (EU) No. ETSI EN 319 411-1 V1.1.1 (2016-02) 910/2014 – refers) ETSI EN 319 411-2 V2.1.1 (2016-02)

Qualified certificate for website authentication ETSI EN 319 401 V2.1.1 (2016-02) (Article 45 of the eIDAS Regulation, (EU) No. ETSI EN 319 411-1 V1.1.1 (2016-02) 910/2014 – refers) ETSI EN 319 411-2 V2.1.1 (2016-02)

Qualified electronic time stamps ETSI EN 319 401 V2.1.1 (2016-02) (Article 42 of the eIDAS Regulation, (EU) No. ETSI EN 319 421 V1.1.1 (2016-03) 910/2014 – refers)

MCS PRODUCT CERTIFICATION MCS Scheme Requirements: (DECC)

Solar Collectors MCS 004 Solar Photovoltaic Panels MCS 005 Micro and Small Wind Turbines MCS 006 Heat Pumps MCS 007 Heating Appliances Fired by Biomass MCS 008 Generic Factory Production Control MCS 010 Testing and Acceptance Criteria MCS 011 Pitched Roof Installation Kits. MCS 012 Heat-led micro CHP systems MCS 014 Electricity-led micro CHP systems MCS 015 Bespoke Building Integrated Photovoltaic Products MCS 017

Assessment Manager: WC1 Page 21 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

HOUSEHOLD OR SIMILAR GAS APPLIANCES

Cooking Appliances BS EN 30-1-1:2008 including Independent Hotplates, Barbecues and BS EN 30-1-4:2002 Ovens BS EN 30-2-1:1998 BS EN 30-1-2:1999 BS EN 30-1-3:2002 BS EN 30-2-2:1999 BS EN 498:1998 BS EN 484:2019 AS 4551:2008 AS 4557:2004 ANSI Z21.1:2005 AS/NZS 5263.0:2017 AS/NZS 5263.1.1:2016 AS/NZS 5263.1.7:2016

Natural Gas Barbecues for Outdoor Use TP 6.9 (Internal Certification Procedure)

Heat Storage Cookers TP 6.10 (Internal Certification Procedure)

Flueless Heat Storage Cookers TP 6.15 (Internal Certification Procedure)

Gas Ovens for Household Use BS EN 15181:2008

Central Heating Boilers and Circulators BS EN 297:1994 BS EN 483:1999 BS EN 625:1996 BS EN 677:1998 AS 4560:2004

Fuel Cell Heating Appliances BS EN 50465:2008

Combined Fire/Back Boiler or Circulator BS 7977-2:2003

Assessment Manager: WC1 Page 22 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

HOUSEHOLD OR SIMILAR GAS APPLIANCES (cont’d)

Water Heaters BS EN 26:1998 (inc. A1, A2 and A3) BS EN 89:2000 BS EN 15033:2006 AS 4552:2005 AS/NZS 5263.0:2017 AS/NZS 5263.1.2:2016

Instantaneous Water Heaters > 45 kW TP 6.3 (Internal Certification Procedure)

Instantaneous Condensing Water Heaters TP 6.4 (Internal Certification Procedure)

Instantaneous Condensing Water Heaters for Outdoor TP 6.5 (Internal Certification Procedure) Use

Gas-Fired Appliances Producing Hot Water - BS EN 13203-2:2006 Assessment of Energy Consumption

Gas Fires and Space Heaters BS EN 509:2000 BS EN 613:2001 BS EN 1266:2002 BS 7977-1:2009 BS EN 13278:2003 AS 4553:2008 AS/NZS 5263.0:2017 AS/NZS 5263.1.3:2016

Space Heaters (EN 613) appliances with C31 Flues TP 6.13 (Internal Certification Procedure)

Space Heaters (EN 613) appliances for unattended TP 6.14 (Internal Certification Procedure) operation

Flueless Heaters BS EN 14829:2007

Assessment Manager: WC1 Page 23 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

HOUSEHOLD OR SIMILAR GAS APPLIANCES (cont’d)

Flueless LPG Space Heaters BS EN 449:2002 Excluding catalytic heaters

Air Heaters BS EN 778:2009 BS EN 1196:1998 BS EN 1319:2009 BS 5258:Part 9:1989 BS 6332:Part 6:1990

LPG Absorption Refrigerators BS EN 732:1999 AS 4555:2002 + A1:2011

Portable Vapour Pressure LPG Appliances BS EN 521:2019 AS 2658:2008

Portable Gas Cookers using non-refillable gas TP 6.20 (Internal Certification Procedure) canisters

Tumble Dryers BS EN 1458-1:2000

Flueless Patio Heaters BS EN 14543:2005

Decorative Open Flame Appliances for Outdoor Use TP 6.24 (Internal Certification Procedure)

Room Sealed LPG Space Heaters for Vehicles and BS EN 624:2000 Boats excluding appliances for vehicles in motion

Assessment Manager: WC1 Page 24 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

COMMERCIAL GAS HEATED CATERING BS EN 203-1:2005 EQUIPMENT BS EN 203-2-1:2005 BS EN 203-2-2:2006 BS EN 203-2-3:2005 BS EN 203-2-4:2005 BS EN 203-2-6:2005 BS EN 203-2-7:2007 BS EN 203-2-8:2005 BS EN 203-2-9:2005 BS EN 203-2-10:2007 BS EN 203-2-11:2006 AS 4563:2004

Professional Catering Barbecues TP 6.19 (Internal Certification Procedure)

Hog/Pig Roasters TP 6.21 (Internal Certification Procedure)

COMMERCIAL GAS APPLIANCES

Overhead Radiant Heaters BS EN 416-1:2009 BS EN 416-2:2006 BS EN 419-1:2009 BS EN 419-2:2006 BS EN 777-1:2009 BS EN 777-2:2009 BS EN 777-3:2009 BS EN 777-4:2009

Gas Radiant Heaters for Outdoor Use TP 6.22 (Internal Certification Procedure)

LPG Space Heaters BS EN 461:1999 BS EN 1596:1998

Heating Boilers - Forced Draught BS EN 303-1:1999

Boiler Body and Forced Draught Burners BS EN 303-3:1999

Assessment Manager: WC1 Page 25 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

COMMERCIAL GAS APPLIANCES (cont’d)

Hot Water Boilers BS EN 656:2000 BS 5978:Part 1:1989 BS 5978:Part 2:1989 BS 5978:Part 3:1989 BS EN 13836:2006 BS EN 15417:2006 prEN 15420:Jan 2006

Air Heaters BS 5990:2006 BS 5991:2006 BS EN 525:2009 BS EN 1020:2009 BS EN 12669:2000 BS EN 621:2009

Tumble Dryers BS EN 12752-1:1999 AS 4554:2005

Commercial Dryers > 20 kW TP 6.8 (Internal Certification Procedure)

GAS CARRYING CONTROLS

Manually Operated Ball Valves BS EN 331:1998

Ball Valve Families 2”-4” TP 6.7 (Internal Certification Procedure)

Taper Plug Valves BS 1552:1995

Automatic Shut-Off Valves BS EN 161:2007 AS 4629:2005

Pressure Governors BS EN 88-1:2007

Assessment Manager: WC1 Page 26 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

GAS CARRYING CONTROLS (cont’d)

Distribution Valves GIS/V7 Part 3:2008

Multifunction Gas Controls BS EN 126:2004

Flame Supervision Devices BS EN 125:1991 BS 6047:Part 1:1981

Gas Taps BS EN 1106:2001 AS 4617: 2018

Safety and Control Devices BS EN 13611:2019

Meter Connectors IGEM/GM/PRS/6:2016

Normally Open (Vent) Valves TP 6.16 (Internal Certification Procedure)

LPG Regulators BS EN 12864:2001

Thermostats BS EN 257:1992

Gas/Air Ratio Controls BS EN 12067-1:1999

ANCILLIARIES RELATING TO GAS EQUIPMENT

Flue Pipes and Accessories BS EN 1856-1:2003

Flexible Hoses & Connection Valves BS 669:Part 1:1989 BS 669:Part 2:1997 BS EN 15069:2008 BS EN 14800:2007 BS EN 15266:2007

Assessment Manager: WC1 Page 27 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ANCILLIARIES RELATING TO GAS EQUIPMENT (cont’d)

Diaphragm Gas Meters BS EN 1359:1999

System Chimneys with Plastic Flue Liners BS EN 14471:2005

Flue Blocks and Masonry Terminals BS EN 13502:2002

ELECTRICAL APPARATUS Those standards marked “#” have been assessed against Articles 13, 18 & 21 of the German Product Household and Similar Electrical Appliances Safety Act 2011 (ProdSG)

Household and Similar Electrical Appliances BS EN 60335-1:2002# BS EN 60335-1:2012 + A13:2017# AS/NZS 60335.1:2002#

Cooking Ranges and Ovens BS EN 60335-2-6:2003# AS/NZS 60335.2.6:2008#

Washing Machines BS EN 60335-2-7:2010#

Tumble Dryers BS EN 60335-2-11:2010 + A1:2015#

1) Excluding Tumble Dryers with water connections 2) Excluding flammable refrigerants & non-sparking ‘n’ class electrical appliances

Appliances for Heating Liquids BS EN 60335-2-15:2002#

Storage Water Heaters BS EN 60335-2-21:2003#

Refrigerating Appliances BS EN 60335-2 24:2010# AS/NZS 60335.2.24:2002# Absorption Type Refrigerators only

Assessment Manager: WC1 Page 28 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ELECTRICAL APPARATUS (cont’d) Those standards marked “#” have been assessed against Articles 13, 18 & 21 of the German Product Household and Similar Electrical Appliances Safety Act 2011 (ProdSG) (cont’d)

Room Heaters BS EN 60335-2-30:2009 + A11:2012# Excluding oil filled radiators

Instantaneous Water Heaters BS EN 60335-2-35:2003# BS EN 60335-2-35:2016 + A1:2019#

Commercial Electric Cooking Ranges and Ovens BS EN 60335-2-36:2002#

Commercial Deep Fat Fryers BS EN 60335-2-37:2002#

Commercial Griddles BS EN 60335-2-38:2003#

Commercial Electric Multi-Purpose Cooking Pans BS EN 60335-2-39:2003#

Electric Heat Pumps BS EN 60335-2-40:2003# Excluding flammable refrigerant type

Pumps BS EN 60335-2-41:2003 + A2:2010

Commercial Convection Ovens, Steam Cookers, And BS EN 60335-2-42:2003# Steam-Convection Ovens

Commercial Steam Cookers BS EN 60335-2-46:1989#

Commercial Grillers and Toasters BS EN 60335-2-48:2003#

Hot Cupboards BS EN 60335-2-49:2003#

Assessment Manager: WC1 Page 29 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ELECTRICAL APPARATUS (cont’d) Those standards marked “#” have been assessed against Articles 13, 18 & 21 of the German Product Household and Similar Electrical Appliances Safety Act 2011 (ProdSG) (cont’d)

Outdoor Electric Barbecues BS EN 60335-2-78:2003#

Fans BS EN 60335-2-80:2003#

Gas, Oil & Fuel Burning Appliances Having Electrical BS EN 60335-2-102:2006 + A2:2016# Connections AS/NZS 60335.2.102:2004#

Electrical Apparatus for CO Detection BS EN 50291-1:2010# BS EN 50291-2:2010#

Audio/video, information and communication BS EN 62368-1:2014 +A11:2017 limited to: technology equipment PCB Material Clause 6.4.5 – Control of Fire Spread in PS2 Circuits

Optocouplers Clause 5.4 – Insulation Materials and Requirements Clause 5.5 – Components as Safeguards Clause 6.4.5 – Control of Fire Spread in PS2 Circuits

Relays Clause 5.4 – Insulation Materials and Requirements Clause 5.5 – Components as Safeguards Clause 6.4.5 – Control of Fire Spread in PS2 Circuits

Assessment Manager: WC1 Page 30 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ELECTRICAL APPARATUS (cont’d)

Controls and Components

Automatic Electrical Controls for Household and BS EN 60730-1:2016 + A1:2019 Similar Use

Automatic Electrical Controls for Electrical Household BS EN 60730-2-1:1997 Appliances

Automatic Electrical Controls: Temperature Sensing BS EN 60730-2-9:2019 + A1:2019 Controls

Luminaires Control Gear

Luminaires. General requirements and tests. BS EN 60598-1:2015 + A1:2019 AS/NZS 60598.1:2017

Luminaires - Particular requirements. BS 4533-102.1:1990 Specification for fixed general purpose luminaires. EN 60598-2-1:1989 AS/NZS 60598.2.1:2014 + A1 2016

Luminaires - Particular requirements. AS/NZS 60598.2.2:2016 + AMD 1 Luminaires for recessed luminaires

Luminaires - Particular requirements. BS EN 60598-2-2:2012 Recessed Luminaires

Luminaires - Particular requirements. BS EN 60598-2-3:2003 + A1:2011 Luminaires for road and street lighting. AS/NZS 60598.2.3:2015

Luminaires - Particular requirements. BS EN 60598-2-4:1998 Portable general purpose luminaires.

Assessment Manager: WC1 Page 31 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ELECTRICAL APPARATUS (cont’d)

Luminaires Control Gear (cont’d)

Luminaires - Particular requirements. BS EN 60598-2-5:1998 (withdrawn) Floodlights. BS EN 60598-2-5:2015 AS/NZS 60598.2.5:2002

Luminaires - Particular requirements. BS EN 60598-2-6:1995 Luminaires with built-in transformers for filament lamps.

Luminaires - Particular requirements. BS 4533-102.19:1990 Specification for air-handling luminaires (safety EN 60598-2-19:1989 requirements).

Luminaires - Particular requirements. BS EN 60598-2-22:2014 Luminaires for emergency lighting. AS/NZS 60598.2.22:2005 IEC 60598-2-22:2014 + A1:2017

Central power supply systems. BS EN 50171:2001

Automatic test systems for battery powered BS EN 62034:2012 emergency escape lighting

Luminaires

Electrical supply track systems for luminaires. BS EN 60570:2003

Lamp Control Gear. General & safety requirements. BS EN 61347-1: 2008 (withdrawn) BS EN 61347-1:2015 AS/NZS 61347.1:2016 + A1:2018

Particular Requirements for starting devices EN 61347-2-1: 2001 (other than glow starters).

Assessment Manager: WC1 Page 32 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ELECTRICAL APPARATUS (cont’d)

Luminaires (cont’d)

Particular requirements for dc or ac supplied electronic EN 61347-2-2: 2012 step-down converters for filament lamps.

Particular requirements for a.c. and/or d.c. supplied EN 61347-2-3: 2011 electronic control gear for fluorescent lamps.

Particular requirements for battery supplied electronic BS EN 61347-2-7: 2012 control gear for emergency lighting (self-contained).

Particular requirements for ballasts for fluorescent BS EN 61347-2-8: 2001 lamps.

Particular requirements for electromagnetic control BS EN 61347-2-9: 2013 gear for discharge lamps (excluding fluorescent lamps).

Particular requirements for miscellaneous electronic BS EN 61347-2-11: 2002 + A1:2019 circuits used with luminaires. AS/NZS 61347.2.11:2003

Particular requirements for d.c. or a.c. supplied BS EN 61347-2-12: 2005 electronic ballasts for discharge lamps (excluding fluorescent lamps).

Particular requirements for d.c. or a.c. supplied BS EN 61347-2-13: 2014 + A1:2017 electronic control gear for LED modules. AS/NZS IEC 61347.2.13:2013

Ballasts for tubular fluorescent lamps. Performance BS EN 60921: 2004 requirements.

Assessment Manager: WC1 Page 33 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ELECTRICAL APPARATUS (cont’d)

Luminaires (cont’d)

Auxiliaries for lamps. Ballasts for discharge lamps BS EN 60923: 2005 (excluding tubular fluorescent lamps). Performance requirements.

Glow-starters for fluorescent lamps BS EN 60155: 1995

SAFETY RELATED ELECTRONIC CONTROLS

Automatic Gas Burner Control Systems BS EN 298:2003 (excluding UV detectors & Type B Battery Operated equipment) ANSI Z21.20:2007

Electronic Flame Safeguards & Flame Detectors AS 4625:2008 (R2016)

Control Functions in Electronic Systems for Gas BS EN 14459:2007 Burners and Appliances

Automatic Burner Control Systems for Oil Burners BS EN 230:2005

Safety & Control Devices for Gas Burners ISO 23550:2004

Gas/Air Ratio Controls BS EN 12067-2:2004

Fuel/Air Ratio Controls for Gas/Oil Appliances ISO 23552-1:2007

Kitchen Extract Control Systems TP 6.1 (Internal Certification Procedure)

Gas Proving Control Systems TP 6.2 (Internal Certification Procedure)

Assessment Manager: WC1 Page 34 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

ELECTRICAL WIRING ACCESSORIES

Rewireable and Non-Rewireable Plugs BS 1363-1:1995 + A4:2012 BS 1363-1:2016 + A1:2018

Switched and unswitched socket-outlets BS 1363-2:2016 +A1:2018

Adaptors BS 1363-3:2016 +A1:2018

Fused Connection units, switched and unswitched BS 1363-4:2016 +A1:2018

Fused Conversion Plugs BS 1363-5:2016

ANCILLIARIES RELATING TO ELECTRICAL EQUIPMENT

Conduit Systems for Cable Management - General BS EN 61386-1:2008 + A1:2019

Conduit Systems for Cable Management - Rigid BS EN 61386-21:2004 + A11:2010 Conduit Systems

Conduit Systems for Cable Management - Pliable BS EN 61386-22:2004 + A11:2010 Conduit Systems

Conduit Systems for Cable Management - Flexible BS EN 61386-23:2004 + A11:2010 Conduit Systems

Conduit Systems for Cable Management - Conduit BS EN 61386-24:2010 Systems Buried Underground

Conduit Systems for Cable Management - Conduit BS EN 61386-25-2011 Fixing Devices

Cable Tray Systems and Cable Ladder Systems BS EN 61537:2007

Assessment Manager: WC1 Page 35 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Product Standard

AUTOMATIC FORCED DRAUGHT BURNERS FOR BS EN 676:2003 GASEOUS FUELS

UNVENTED HOT WATER STORAGE SYSTEMS TP 6.12 (Internal Certification Procedure) (based on BS 7206:1990 and G3 Building Regulations)

COAL-FIRED APPLIANCES

Charcoal Barbecues BS EN 1860-1:2003

OIL FIRED APPLIANCES

Atomising Heating Boilers BS EN 304:1992

Condensing Heating Boilers for Fuel Oil BS EN 15034:2006

Oil Fired Room Sealed Units up to 70 kW BS EN 15035:2006

GAS APPLIANCE SAFETY (NEW ZEALAND)

Gas appliances as listed in the following sections of NZS 5262:2003 this schedule: • Household or similar gas appliances • Commercial gas heated catering equipment • Commercial gas appliances • Automatic forced draught burners for gaseous fuels

GAS APPLIANCE SAFETY (SOUTH AFRICA)

Gas appliances as listed in the following sections of SANS 1539:2008 this schedule: • Household or similar gas appliances • Commercial gas heated catering equipment • Commercial gas appliances • Automatic forced draught burners for gaseous fuels

END

Assessment Manager: WC1 Page 36 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 95/467/EC Chimneys, flues and EN 12446:2003 Regulation 2011 (retained Body (System specific products (1/1) : - EN 12446:2011 EU law EUR 305/2011) as 2+) Prefabricated chimneys (storey EN 13063-1:2005+A1:2007 amended by the Construction height elements), flue liners EN 13069:2005 Products (Amendment etc.) (elements or blocks), multi-shell EN 13084-5:2005 (EU Exit) Regulations 2019 chimney (elements or blocks), single EN 13084-5:2005/AC:2006 and the Construction Products walled chimneys and attached EN 13084-7:2005 (Amendment etc.) (EU Exit) chimneys (chimneys). EN 13084-7:2005/AC:2009 Regulations 2020. EN 14471:2005 EN 1457-1:2012 EN 1457-2:2012 EN 1806:2006 EN 1856-1:2009 EN 1856-2:2009 EN 1857:2010 EN 1858:2008 EN 1858:2008+A1:2011

Product 95/467/EC Structural bearings (1/1) : EN 1337-3:2005 Certification Body - Structural bearings (in buildings EN 1337-4:2004 (System 1) and civil engineering works where EN 1337-4:2004/AC:2007 requirements on individual bearings EN 1337-5:2005 are critical). EN 1337-6:2004 EN 1337-7:2004 EN 1337-8:2007

96/577/EC Fire alarm/detection, EN 12416-1:2001 fixed fire-fighting, fire and smoke EN 12416-1:2001/A1:2004 control and explosion suppression EN 12416-2:2001 products (1/1) : - Dry powder systems-kits (fire safety).

Assessment Manager: WC1 Page 37 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 671-1:2001/AC:2002 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EN 671-2: 2001 EU law EUR 305/2011) as (System 1) control and explosion suppression EN 671-2:2001/A1:2004 amended by the Construction (cont’d) products (1/1) : - First aid hose Products (Amendment etc.) systems-kits (fire safety). (EU Exit) Regulations 2019 EN 671-1:2001 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d) 96/577/EC Fire alarm/detection, EN 12101-2:2003 fixed fire-fighting, fire and smoke EN 12101-3:2002 control and explosion suppression EN 12101-3:2002/AC:2005 products (1/1) : - Smoke and heat EN 12101-3:2015 exhaust ventilation systems-kits (fire safety).

96/577/EC Fire alarm/detection, EN 12094-9:2003 fixed fire-fighting, fire and smoke EN 54-10:2002 control and explosion suppression EN 54-10:2002/A1:2005 products (1/1) : - Smoke, heat and EN 54-12:2002 flame detectors (fire safety). EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006

96/577/EC Fire alarm/detection, EN 12094-12:2003 fixed fire-fighting, fire and smoke EN 14604:2005 control and explosion suppression EN 14604:2005/AC:2008 products (1/1) : - Alarm devices EN 54-23:2010 (fire safety). EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006

96/577/EC Fire alarm/detection, EN 12101-10:2005 fixed fire-fighting, fire and smoke EN 12101-10:2005/AC:2007 control and explosion suppression products (1/1) : - Power supplies (fire control components) (fire safety).

Assessment Manager: WC1 Page 38 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 12101-1:2005 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EN 12101-1:2005/A1:2006 EU law EUR 305/2011) as (System 1) control and explosion suppression amended by the Construction (cont’d) products (1/1) : - Smoke curtains Products (Amendment etc.) (fire safety). (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) 96/577/EC Fire alarm/detection, EN 12094-13:2001 Regulations 2020. (cont’d) fixed fire-fighting, fire and smoke EN 12094-13:2001/AC:2002 control and explosion suppression products (1/1) : - Check valves and non-return valves (fire safety).

96/577/EC Fire alarm/detection, EN 12094-11:2003 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Mechanical weighing devices (fire safety).

96/577/EC Fire alarm/detection, EN 12094-10:2003 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure gauges and pressure switches (fire safety).

96/577/EC Fire alarm/detection, EN 12094-2:2003 fixed fire-fighting, fire and smoke EN 12094-6:2006 control and explosion suppression products (1/1) : - Non-electrical disable devices (fire safety).

96/577/EC Fire alarm/detection, EN 12094-4:2004 fixed fire-fighting, fire and smoke EN 12094-5:2006 control and explosion suppression products (1/1) : - Selector valves and their actuators (fire safety).

Assessment Manager: WC1 Page 39 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 12094-3:2003 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EU law EUR 305/2011) as (System 1) control and explosion suppression amended by the Construction (cont’d) products (1/1) : - Multiple controls Products (Amendment etc.) (fire safety) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) 96/577/EC Fire alarm/detection, EN 14339:2005 Regulations 2020. (cont’d) fixed fire-fighting, fire and smoke EN 14384:2005 control and explosion suppression products (1/1) : - Fire hydrants (fire safety)

96/577/EC Fire alarm/detection, EN 54-11:2001/A1:2005 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety).

96/577/EC Fire alarm/detection, EN 54-18:2005 fixed fire-fighting, fire and smoke EN 54-18:2005/AC:2007 control and explosion suppression EN 54-24:2008 products (1/1) : - Input/output EN 54-25:2008 devices (fire safety) EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012

96/577/EC Fire alarm/detection, EN 54-17:2005 fixed fire-fighting, fire and smoke EN 54-17:2005/AC:2007 control and explosion suppression products (1/1) : - Short circuit isolators (fire safety).

96/577/EC Fire alarm/detection, EN 12094-7:2000 fixed fire-fighting, fire and smoke EN 12094-7:2000/A1:2005 control and explosion suppression EN 12259-1:1999 + products (1/1) : - A1:2001 Nozzles/sprinklers/outlets (fire EN 12259-1:1999+A1:01/A2:04 safety) EN 12259-1:1999+A1:01/A3:06

Assessment Manager: WC1 Page 40 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 12094-8:2006 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EU law EUR 305/2011) as (System 1) control and explosion suppression amended by the Construction (cont’d) products (1/1) : - Flexible Products (Amendment etc.) connectors (fire safety). (EU Exit) Regulations 2019 and the Construction Products

(Amendment etc.) (EU Exit) 96/577/EC Fire alarm/detection, EN 12094-4:2004 Regulations 2020. (cont’d) fixed fire-fighting, fire and smoke EN 12094-5:2006 control and explosion suppression products (1/1) : - High pressure container valve assemblies and their actuators (fire safety).

96/577/EC Fire alarm/detection, EN 12259-3:2000/A1:2001 fixed fire-fighting, fire and smoke EN 12259-3:2000/A2:2005 control and explosion suppression products (1/1) : - Dry alarm valve assemblies (fire safety).

96/577/EC Fire alarm/detection, EN 12259-2:1999/A1:2001 fixed fire-fighting, fire and smoke EN 12259-2:1999/A2:2005 control and explosion suppression EN 12259-2:1999/AC:2002 products (1/1) : - Wet alarm valve assemblies (fire safety).

96/577/EC Fire alarm/detection, EN 12259-5:2002 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Water flow detectors/switches (fire safety)

96/577/EC Fire alarm/detection, EN 12101-6:2005 fixed fire-fighting, fire and smoke EN 12101-6:2005/AC:2006 control and explosion suppression products (1/1) : - Pressure differential systems-kits (fire safety).

Assessment Manager: WC1 Page 41 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 54-4:1997 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EN 54-4:1997/A1:2002 EU law EUR 305/2011) as (System 1) control and explosion suppression EN 54-4:1997/A2:2006 amended by the Construction (cont’d) products (1/1) : - Power supplies EN 54-4:1997/AC:1999 Products (Amendment etc.) (fire detection/alarm components) (EU Exit) Regulations 2019 (fire safety). and the Construction Products (Amendment etc.) (EU Exit)

Regulations 2020. (cont’d) 96/577/EC Fire alarm/detection, EN 12094-1:2003 fixed fire-fighting, fire and smoke EN 54-16:2008 control and explosion suppression EN 54-2:1997 products (1/1) : - Control and EN 54-2:1997/AC:1999 indicating devices (fire safety).

96/577/EC Fire alarm/detection, EN 12259-4:2000/A1:2001 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Sprinklers and water spray systems-kits (fire safety).

96/577/EC Fire alarm/detection, EN 13565-1:2003 fixed fire-fighting, fire and smoke EN 54-7:2000/A1:2002 control and explosion suppression EN 54-7:2000/A2:2006 products (1/1) : - Foam systems-kits (fire safety).

96/577/EC Fire alarm/detection, EN 54-21:2006 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety).

Product 2011/284/EU Power, control and EN 50575:2014 + A1:2016 Certification Body communication cables (1/3):- Power, (System 1+) control and communication cables (for uses subject to regulations on reaction to fire)

Assessment Manager: WC1 Page 42 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/579/EC Circulation fixtures (1/2) : EN 1463-1:2009 Regulation 2011 (retained Certification Body - Road marking products: EU law EUR 305/2011) as (System 1) retroreflecting road studs (for amended by the Construction (cont’d) circulation area). Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products 96/579/EC Circulation fixtures (1/2) : EN 40-4:2005 (Amendment etc.) (EU Exit) - Road lighting columns (for EN 40-4:2005/AC:2006 Regulations 2020. (cont’d) circulation areas). EN 40-5:2002 EN 40-6:2002 EN 40-7:2002

96/579/EC Circulation fixtures (1/2) : EN 12966-1:2005+A1:2009 - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: variable message traffic signs (for circulation areas).

96/579/EC Circulation fixtures (1/2) : EN 12899-1:2007 - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent traffic signs (for circulation areas).

96/579/EC Circulation fixtures (1/2) : EN 12352:2006 - Road traffic signs and traffic EN 12899-3:2007 control devices installed permanently for vehicular and pedestrian uses: permanent warning devices and delineators (for circulation areas).

96/579/EC Circulation fixtures (1/2) : EN 12368:2006 - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic lights and fixed danger lamps (for circulation areas).

Assessment Manager: WC1 Page 43 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/579/EC Circulation fixtures (1/2) : EN 1423:1997/A1:2003 Regulation 2011 (retained Certification Body - Road marking products: Drop-on EN 1423:2012 EU law EUR 305/2011) as (System 1) materials (glass beads, anti-skid EN 1463-1:2009 amended by the Construction (cont’d) aggregates and combinations of the Products (Amendment etc.) two) (for circulation areas). (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) 96/579/EC Circulation fixtures (1/2) : EN 1317-5:2007+A1:2008 Regulations 2020. (cont’d) - Vehicle restraint barriers: EN 1317-5:2007+A2:2012

transition barriers (for circulation areas).

96/579/EC Circulation fixtures (1/2) : EN 12899-2:2007 - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic bollards (for circulation areas).

Test Laboratory 96/579/EC Circulation fixtures (2/2) : EN 14388:2005 (System 3) - Road traffic noise reducing EN 14388:2005/AC:2008 devices and barriers (for circulation areas).

96/580/EC Curtain wallings (1/1) : - EN 13830:2003 Curtain wall kits (as external walls not subject to reaction to fire requirements), Curtain wall kits (as external walls subject to reaction to fire requirements).

Product 96/580/EC Curtain wallings (1/1) : - EN 13830:2003 Certification Body Curtain wall kits (as external walls (System 1) subject to reaction to fire requirements).

Assessment Manager: WC1 Page 44 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 96/581/EC Geotextiles (1/2) : - EN 13249:2000 Regulation 2011 (retained Body (System Geosynthetics (membranes and EN 13249:2000/A1:2005 EU law EUR 305/2011) as 2+) textiles), geotextiles, EN 13250:2000 amended by the Construction geocomposites, geogrids, EN 13250:2000/A1:2005 Products (Amendment etc.) geomembranes and EN 13251:2000 (EU Exit) Regulations 2019 geonets used: for drainage and/or EN 13251:2000/A1:2005 and the Construction Products filtration (in roads, railways, EN 13252:2000 (Amendment etc.) (EU Exit) foundations and walls, drainage EN 13252:2000/A1:2005 Regulations 2020. (cont’d) systems, erosioncontrol, reservoirs EN 13253:2000 and dams, canals, tunnels and EN 13253:2000/A1:2005 underground structures, liquid waste EN 13257:2000 disposal or containment, EN 13257:2000/A1:2005 for solid waste storage or waste EN 13257:2000/AC:2003 disposal). EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005

96/581/EC Geotextiles (1/2) : - EN 13257:2000 Geosynthetics (membranes and EN 13257:2000/A1:2005 textiles), geotextiles, EN 13257:2000/AC:2003 geocomposites, geogrids, EN 13265:2000 geomembranes and EN 13265:2000/A1:2005 geonets used: as fluid or gas EN 13265:2000/AC:2003 barriers (in roads, railways, EN 13361:2004 foundations and walls, drainage EN 13361:2004/A1:2006 systems, erosion control, reservoirs EN 13362:2005 and dams, canals, tunnels and EN 13491:2004 underground structures, liquid waste EN 13491:2004/A1:2006 disposal or containment, for solid EN 13492:2004 waste storage or waste disposal). EN 13492:2004/A1:2006 EN 13493:2005 EN 15382:2008

Assessment Manager: WC1 Page 45 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 96/581/EC Geotextiles (1/2) : - Regulation 2011 (retained Body (System Geosynthetics (membranes and EN 13257:2000 EU law EUR 305/2011) as 2+) (cont’d) textiles), geotextiles, EN 13257:2000/A1:2005 amended by the Construction geocomposites, geogrids, EN 13257:2000/AC:2003 Products (Amendment etc.) geomembranes and EN 13265:2000 (EU Exit) Regulations 2019 geonets used: for reinforcement (in EN 13265:2000/A1:2005 and the Construction Products roads, railways, foundations and EN 13265:2000/AC:2003 (Amendment etc.) (EU Exit) walls, drainage systems, erosion EN 13361:2004 Regulations 2020. (cont’d) control, reservoirs and dams, EN 13361:2004/A1:2006 canals, tunnels and underground EN 13362:2005 structures, liquid waste disposal or EN 13491:2004 containment, for solid EN 13491:2004/A1:2006 waste storage or waste disposal). EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15381:2008

Assessment Manager: WC1 Page 46 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 96/581/EC Geotextiles (1/2) : - EN 13249:2000 Regulation 2011 (retained Body (System Geosynthetics (membranes and EN 13249:2000/A1:2005 EU law EUR 305/2011) as 2+) (cont’d) textiles), geotextiles, EN 13250:2000 amended by the Construction geocomposites, geogrids, EN 13250:2000/A1:2005 Products (Amendment etc.) geomembranes and EN 13251:2000 (EU Exit) Regulations 2019 geonets used: as protective layer (in EN 13251:2000/A1:2005 and the Construction Products roads, railways, foundations and EN 13252:2000 (Amendment etc.) (EU Exit) walls, drainage systems, erosion EN 13252:2000/A1:2005 Regulations 2020. (cont’d) control, reservoirs and dams, EN 13253:2000 canals, tunnels and underground EN 13253:2000/A1:2005 structures, liquid waste disposal or EN 13254:2000 containment, for solid EN 13254:2000/A1:2005 waste storage or waste disposal). EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005

97/176/EC Structural timber EN 14250:2010 products (1/3) : - Solid structural timber products; Kits (trusses, floors, walls, roofs, frames) (bridges, railtracks and buildings).

Assessment Manager: WC1 Page 47 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 97/176/EC Structural timber EN 14081-1:2005+A1:2011 Regulation 2011 (retained Body (System products (1/3) : - Solid structural EN 14250:2010 EU law EUR 305/2011) as 2+) (cont’d) timber amended by the Construction products: Elements (bridge Products (Amendment etc.) elements, truss elements, (EU Exit) Regulations 2019 sleepers, floor elements, wall and the Construction Products elements, roof elements such (Amendment etc.) (EU Exit) as beams, arches, joists, rafters, Regulations 2020. (cont’d) columns, poles, piles) (bridges, railtracks and buildings).

Product 97/176/EC Structural timber EN 14080:2005 Certification Body products (2/3) : - Structural glued (System 1) laminated products and other glued timber products: Kits (trusses, floors, walls, roofs, frames) (for bridges and buildings).

97/176/EC Structural timber EN 14080:2005 products (2/3) : - Structural glued EN 14374:2004 laminated products and other glued timber products: Elements (bridge elements, truss elements, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (for bridges and buildings).

FPC Certification 97/462/EC Wood-based panels (1/2) EN 13986:2004 +A1:2015 Body (System : - Unfaced overlaid and veneered 2+) or coated wood-based panels (for structural elements in internal or external applications).

Assessment Manager: WC1 Page 48 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 97/462/EC Wood-based panels (1/2) EN 13986:2004 +A1:2015 Regulation 2011 (retained Certification Body : - Unfaced overlaid and veneered EU law EUR 305/2011) as (System 1) or coated wood-based panels (for amended by the Construction structural elements in internal or Products (Amendment etc.) external application). (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Test Laboratory 97/464/EC Waste water engineering EN 1433:2002 Regulations 2020. (cont’d) (System 3) products outside buildings (2/3) : - EN 1433:2002/A1:2005 Prefabricated drainage channel (to be used outside buildings, for waste water from buildings and civil engineering works including roads).

Product 97/555/EC EN 413-1:2004 Certification Body Cements, building limes and other EN 413-1:2011 (System 1+) hydraulic binders : - Masonry cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

97/555/EC Cements, building limes EN 14216:2004 and other hydraulic binders :- EN 197-1:2000 Common cements, including: - EN 197-1:2000/ A1:2004 Portland cement, -Portland EN 197-1:2000/A3:2007 composite cements: Portland-slag EN 197-1:2011 cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

Assessment Manager: WC1 Page 49 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 97/555/EC Cements, building limes EN 459-1:201 Regulation 2011 (retained Body (System 2) and other hydraulic binders : - EU law EUR 305/2011) as Building limes, including: amended by the Construction -Calcium limes Products (Amendment etc.) -Dolomitic limes, (EU Exit) Regulations 2019 -Hydraulic limes (preparation of and the Construction Products concrete, mortar, grout and (Amendment etc.) (EU Exit) other mixes for construction and for Regulations 2020. (cont’d) the manufacture of construction products).

FPC Certification 97/555/EC Cements, building limes EN 13282-1:2013 Body (System and other hydraulic binders : - 2+) Rapid hardening hydraulic road binders (preparation of concrete, mortar, grout and other mixes for road bases stabilisation)

Product 97/555/EC Cements, building limes EN 14647:2005 Certification Body and other hydraulic binders : - EN 14647:2005/AC:2006 (System 1+) Calcium aluminate cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

97/555/EC Cements, building limes EN 14216:2004 and other hydraulic binders : - EN 15743:2010 Special cements, including: -low heat cements, -sulfate resisting cement, -white cement, - sea water resisting cement, -low alkali cement (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

Assessment Manager: WC1 Page 50 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 97/740/EC Masonry and related EN 998-2:2016 Regulation 2011 (retained Body (System products (1/3) : - Factory-made, EU law EUR 305/2011) as 2+) designed masonry mortars (in walls, amended by the Construction columns and partitions). Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products 97/740/EC Masonry and related EN 771-1:2011 + A1:2015 (Amendment etc.) (EU Exit) products (1/3) : - Masonry units EN 771-2:2011 Regulations 2020. (cont’d) category I (in walls, columns and EN 771-3:2011 + A1:2015

partitions). EN 771-4:2011 + A1:2015 EN 771-5:2011 + A1:2015 EN 771-6:2011

Product 97/808/EC Floorings (2/2) : - EN 14041:2004 Certification Body Resilient and textile floorings - EN 14041:2004/AC:2006 (System 1) homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses).

97/808/EC Floorings (2/2) : - Floor EN 13454-1:2004 screed materials (for internal uses). EN 13813:2002

Assessment Manager: WC1 Page 51 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/214/EC Structural metallic EN 10025-1:2004 Regulation 2011 (retained Body (System products and ancillaries (1/4) : - EN 10219-1:2006 EU law EUR 305/2011) as 2+) Structural metallic sections/profiles: EN 15088:2005 amended by the Construction hot rolled, cold formed or otherwise Products (Amendment etc.) produced sections/profiles with (EU Exit) Regulations 2019 various shapes (T, L, H, U, Z, and the Construction Products I, channels, angle, hollow, tubes), (Amendment etc.) (EU Exit) flat products (plate, sheet, Regulations 2020. (cont’d) strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures).

98/214/EC Structural metallic EN 13479:2004 products and ancillaries (3/4) : - Welding materials (for uses in structural metallic works).

98/214/EC Structural metallic EN 14399-1:2005 products and ancillaries (4/4) : - Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works).

Test Laboratory 98/436/EC Roof coverings, EN 12951:2004 (System 3) rooflights, roof windows and ancillary products (6/6) : - Roof access systems, walkways and footholds (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).

Assessment Manager: WC1 Page 52 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 98/436/EC Roof coverings, EN 1873:2005 Regulation 2011 (retained (System 3) rooflights, roof windows and EU law EUR 305/2011) as (cont’d) ancillary amended by the Construction products (6/6) : - Rooflights (for uses Products (Amendment etc.) other than those specified in families (EU Exit) Regulations 2019 (1/6), (2/6), (3/6), (4/6), (5/6)). and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d) 98/437/EC Internal and external wall BS EN 13964:2014 and ceiling finishes (1/5) : - Suspended ceilings (kits) (as internal or external finishes used for fire protection of ceilings).

Product 98/437/EC Internal and external wall BS EN 13964:2014 Certification Body and ceiling finishes (3/5): - (System 1) Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).

98/437/EC Internal and external wall EN 14716:2004 and ceiling finishes (3/5) : - Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).

98/437/EC Internal and external wall EN 438-7:2005 and ceiling finishes (3/5) : - Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).

Assessment Manager: WC1 Page 53 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 Regulation 2011 (retained Body (System high safety requirements (2/2) : - EN 13043:2002 EU law EUR 305/2011) as 2+) Aggregates for bituminous mixtures EN 13043:2002/AC:2004 amended by the Construction and surface treatments EN 13055-1:2002 Products (Amendment etc.) (for roads and other civil engineering EN 13055-1:2002/AC:2004 (EU Exit) Regulations 2019 works). EN 13055-2:2004 and the Construction Products EN 13139:2002 (Amendment etc.) (EU Exit) EN 13139:2002/AC:2004 Regulations 2020. (cont’d) EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Armourstones (for hydraulic EN 13043:2002/AC:2004 structures and other civil EN 13055-1:2002 engineering works). EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Aggregates for unbound and EN 13043:2002/AC:2004 hydraulically bound mixtures (for EN 13055-1:2002 roads and other civil engineering EN13055-1:2002/AC:2004 works). EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

Assessment Manager: WC1 Page 54 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 Regulation 2011 (retained Body (System high safety requirements (2/2) : - EN 13043:2002 EU law EUR 305/2011) as 2+) (cont’d) Fillers for bituminous mixtures and EN 13043:2002/AC:2004 amended by the Construction surface treatments (for EN 13055-1:2002 Products (Amendment etc.) roads and other civil engineering EN13055-1:2002/AC:2004 (EU Exit) Regulations 2019 works). EN 13055-2:2004 and the Construction Products EN 13139:2002 (Amendment etc.) (EU Exit) EN 13139:2002/AC:2004 Regulations 2020. (cont’d) EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Aggregates and fillers for concrete, EN 13043:2002/AC:2004 mortar and grout (in buildings, roads EN 13055-1:2002 and other civil engineering work). EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Railway ballast (for railway works). EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

Assessment Manager: WC1 Page 55 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/601/EC Road construction EN 13108-1:2006 Regulation 2011 (retained Body (System products (1/2) : - Bituminous EN 13108-1:2006/AC:2008 EU law EUR 305/2011) as 2+) (cont’d) mixtures (for road construction and EN 13108-2:2006 amended by the Construction surface treatment of roads). EN 13108-2:2006/AC:2008 Products (Amendment etc.) EN 13108-3:2006 (EU Exit) Regulations 2019 EN 13108-3:2006/AC:2008 and the Construction Products EN 13108-4:2006 (Amendment etc.) (EU Exit) EN 13108-4:2006/AC:2008 Regulations 2020. (cont’d) EN 13108-5:2006 EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN 13108-7:2006 EN 13108-7:2006/AC:2008

98/601/EC Road construction EN 12591:2009 products (1/2) : - Bitumen (for road EN 13808:2005 construction and surface treatment EN 13924:2006 of roads). EN 13924:2006/AC:2006 EN 14023:2010

98/601/EC Road construction EN 12271:2006 products (1/2) : - Surface treatments EN 12273:2008 (for surface treatments of roads).

98/601/EC EN 14695:2010 Road construction products (1/2) : - Bridge deck waterproofing products and kits (for bridge decks).

99/90/EC Membranes (1/3) : - Roof EN 13707:2004+A2:2009 sheets (in buildings). EN 13956:2005 EN 13956:2005/AC:2006

99/90/EC Membranes (1/3) : - Damp EN 13967:2004 proofing sheets (in buildings). EN 13967:2004/A1:2006

EN 13969:2004 EN 13969:2004/A1:2006

Assessment Manager: WC1 Page 56 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/90/EC Membranes (1/3) : - Water EN 13859-1:2005+A1:2008 Regulation 2011 (retained (System 3) vapour control layers (in EN 13859-2:2010 EU law EUR 305/2011) as buildings). EN 13970:2004 amended by the Construction EN 13970:2004/A1:2006 Products (Amendment etc.) EN 13984:2004 (EU Exit) Regulations 2019 EN 13984:2004/A1:2006 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d) 99/90/EC Membranes (1/3) : - Roof EN 13859-1:2005+A1:2008 underlays (in buildings).

99/90/EC Membranes (1/3) : - Damp EN 14909:2006 proof courses (in buildings). EN 14967:2006

Product 99/90/EC Membranes (2/3) : - Water EN 13859-1:2005+A1:2008 Certification Body vapour control layers (for uses EN 13859-2:2010 (System 1) subject to reaction to fire EN 13970:2004 regulations). EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006

99/90/EC Membranes (2/3) : - Roof EN 13707:2004+A2:2009 sheets (for uses subject to reaction EN 13956:2005 to fire regulations). EN 13956:2005/AC:2006

99/90/EC Membranes (2/3) : - Roof EN 13859-1:2005+A1:2008 underlays (for uses subject to reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 14909:2006 proof courses (for uses subject to EN 14967:2006 reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 13967:2004 proofing sheets (for uses subject to EN 13967:2004/A1:2006 reaction to fire regulations). EN 13969:2004 EN 13969:2004/A1:2006

Assessment Manager: WC1 Page 57 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/90/EC Membranes (2/3) : - Water EN 13859-1:2005+A1:2008 Regulation 2011 (retained (System 3) vapour control layers (for uses EN 13859-2:2010 EU law EUR 305/2011) as subject to reaction to fire EN 13970:2004 amended by the Construction regulations). EN 13970:2004/A1:2006 Products (Amendment etc.) EN 13984:2004 (EU Exit) Regulations 2019 EN 13984:2004/A1:2006 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d) 99/90/EC Membranes (2/3) : - Roof EN 13707:2004+A2:2009 sheets (for uses subject to reaction EN 13956:2005 to fire regulations). EN 13956:2005/AC:2006

99/90/EC Membranes (2/3) : - Roof EN 13859-1:2005+A1:2008 underlays (for uses subject to reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 14909:2006 proof courses (for uses subject to EN 14967:2006 reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 13967:2004 proofing sheets (for uses subject EN 13967:2004/A1:2006 to reaction to fire regulations). EN 13969:2004 EN 13969:2004/A1:2006

Assessment Manager: WC1 Page 58 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 99/91/EC Thermal insulating EN 13162:2012 + A1:2015 Regulation 2011 (retained Certification Body products (2/2) : - Thermal insulating EN 13163:2008 EU law EUR 305/2011) as (System 1) products (factory-made products EN 13164:2008 amended by the Construction and products intended to be formed EN 13165:2008 Products (Amendment etc.) in-situ) (for uses subject to EN 13166:2008 (EU Exit) Regulations 2019 regulations on reaction to fire). EN 13167:2008 and the Construction Products EN 13168:2008 (Amendment etc.) (EU Exit) EN 13169:2008 Regulations 2020. (cont’d) EN 13170:2008 EN 13171:2008 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009 + A1:2013 EN 14304:2009 EN 14305:2009 EN 14306:2009 EN 14307:2009 EN 14308:2009 EN 14309:2009 EN 14313:2009 EN 14314:2009 EN 14316-1:2004 EN 14317-1:2004

99/93/EC Doors, windows, shutters, EN 1125:2008 blinds, gates and related building EN 1154:1996/A1:2002 hardware (1/1) : - Building hardware EN related to doors, gates 1154:1996/A1:2002/AC:2006 and windows (fire/smoke EN compartmentation and on escape 1155:1996/A1:2002/AC:2006 routes). EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003

Assessment Manager: WC1 Page 59 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Calculation body 99/93/EC Doors, windows, shutters, EN 13241-1:2003 Regulation 2011 (retained blinds, gates and related building EN 13241-1:2003+A1:2011 EU law EUR 305/2011) as Test Laboratory hardware (1/1) : - Doors and gates EN 14351-1:2006+A1:2010 amended by the Construction (System 3) (with or without related hardware) Products (Amendment etc.) (other declared specific uses and/or (EU Exit) Regulations 2019 uses subject to other specific and the Construction Products requirements, in particular noise, (Amendment etc.) (EU Exit) energy, tightness and safety-in-use Regulations 2020. (cont’d) (i.e. NOT for fire/smoke compartmentation, NOT for escape routes).

Product 99/93/EC Doors, windows, shutters, EN 14351-1:2006 + A1:2010 Certification Body blinds, gates and related building EN 14351-1:2006 + A2:2016 (System 1) hardware (1/1) : - Doors and gates EN 16034:2014 (with or without related hardware) (fire/smoke compartmentation and on escape routes).

Calculation body 99/93/EC Doors, windows, shutters, EN 14351-1:2006+A1:2010 blinds, gates and related building Test Laboratory hardware (1/1) : - Windows (with or (System 3) without related hardware) (any other).

Product 99/469/EC Products related to EN 14889-1:2006 Certification Body concrete, mortar and grout (1/2) : - EN 14889-2:2006 (System 1) Fibres (for structural uses in concrete, mortar and grout).

Assessment Manager: WC1 Page 60 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 99/469/EC Products related to EN 450-1:2012 Regulation 2011 (retained Certification Body concrete, mortar and grout (1/2) : - EU law EUR 305/2011) as (System 1+) Additions (Type II) (for concrete, amended by the Construction mortar and grout) Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products FPC Certification 99/469/EC Products related to EN 1504-2:2004 (Amendment etc.) (EU Exit) Body (System concrete, mortar and grout (1/2) : - EN 1504-3:2005 Regulations 2020. (cont’d) 2+) Concrete protection and repair EN 1504-4:2004 products (for other uses in buildings EN 1504-5:2004 and civil engineering works). EN 1504-6:2006 EN 1504-7:2006

99/469/EC Products related to EN 12878:2005 concrete, mortar and grout (1/2) : - EN 12878:2005/AC:2006 Additions (type I) (for concrete, mortar and grout).

99/469/EC Products related to EN 934-2:2009 + A1:2012 concrete, mortar and grout (1/2) : - EN 934-3:2009 + A1:2012 Admixtures (for concrete, mortar and grout)

Test Laboratory 99/472/EC Pipes, tanks and EN 1057:2006+A1:2010 (System 3) ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

Assessment Manager: WC1 Page 61 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/472/EC Pipes, tanks and EN 682:2002 Regulation 2011 (retained (System 3) ancillaries not in contact with water EN 682:2002/A1:2005 EU law EUR 305/2011) as (cont’d) intended for human consumption amended by the Construction (1/5) : - Fittings, adhesives, joints, Products (Amendment etc.) joint sealings and gaskets (in (EU Exit) Regulations 2019 installations for the and the Construction Products transport/distribution/ storage of (Amendment etc.) (EU Exit) gas/fuel intended for the Regulations 2020. (cont’d) supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

Product 99/472/EC Pipes, tanks and EN 1057:2006+A1:2010 Certification Body ancillaries not in contact with water (System 1) intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building), Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).

Assessment Manager: WC1 Page 62 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/472/EC Pipes, tanks and EN 1057:2006+A1:2010 Regulation 2011 (retained (System 3) ancillaries not in contact with water EU law EUR 305/2011) as intended for human consumption amended by the Construction (4/5) : - Pipes (in installations in Products (Amendment etc.) areas subject to reaction to fire (EU Exit) Regulations 2019 regulations, used for the and the Construction Products transport/disposal/storage of water (Amendment etc.) (EU Exit) not intended for human Regulations 2020. (cont’d) consumption).

Product 2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 Certification Body glass and glass-block products (1/6) (System 1) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance).

2000/245/EC Flat glass, profiled EN 1096-4:2004 glass and glass-block products (1/6) EN 12150-2:2004 : - Flat or curved glass panels (for EN 12337-2:2004 use in a glazed assembly EN 13024-2:2004 intended specifically to provide fire EN 14178-2:2004 resistance). EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing).

Assessment Manager: WC1 Page 63 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 2000/245/EC Flat glass, profiled EN 1096-4:2004 Regulation 2011 (retained Certification Body glass and glass-block products (4/6) EN 12150-2:2004 EU law EUR 305/2011) as (System 1) : - Flat or curved glass panels (for EN 12337-2:2004 amended by the Construction (cont’d) use as anti-bullet, or EN 1279-5:2005+A2:2010 Products (Amendment etc.) anti-explosion glazing). EN 13024-2:2004 (EU Exit) Regulations 2019 EN 14178-2:2004 and the Construction Products EN 1748-1-2:2004 (Amendment etc.) (EU Exit) EN 1748-2-2:2004 Regulations 2020. (cont’d) EN 1863-2:2004 EN 572-9:2004

Test Laboratory 2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 (System 3) glass and glass-block products (4/6) : - Insulating glass units (for other uses liable to present "safety-in-use" risks and subject to such regulations).

2000/245/EC Flat glass, profiled EN 1096-4:2004 glass and glass-block products (4/6) EN 12150-2:2004 : - Flat or curved glass panels (for EN 12337-2:2004 other uses liable to present EN 13024-2:2004 "safety-in-use" risks and subject to EN 14178-2:2004 such regulations). EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 glass and glass-block products (5/6) : - Insulating glass units (for uses relating to energy conservation and/or noise reduction).

Assessment Manager: WC1 Page 64 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 2000/245/EC Flat glass, profiled EN 14179-2:2005 Regulation 2011 (retained (System 3) glass and glass-block products (5/6) EU law EUR 305/2011) as (cont’d) : - Flat or curved glass panels amended by the Construction (specially treated) (for uses 2 Products (Amendment etc.) relating to energy conservation (EU Exit) Regulations 2019 and/or noise reduction). and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. Product 99/472/EC Pipes, tanks and EN 331:1998 (cont’d) Certification Body ancillaries not in contact with water EN 331:1998/A1:2010 (system 1) intended for human consumption Test Laboratory (4/5) :- Valves and taps (in (System 3) installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

FPC Certification 95/467/EC Chimneys, flues and EN 416-1:2009 Body (System specific products (1/1) : - EN 621:2009 2+) Prefabricated EN 777-1:2009 chimneys (storey height elements), EN 777-2:2009 flue liners (elements or EN 777-3:2009 blocks), multi-shell chimney EN 777-4:2009 (elements or blocks), single EN 778:2009 walled chimneys and attached EN 1020:2009 chimneys (chimneys). EN 1319:2009

Assessment Manager: WC1 Page 65 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 99/472/EC Pipes, tanks and EN 14800:2007 Regulation 2011 (retained Certification Body ancillaries not in contact with water EN 15069:2008 EU law EUR 305/2011) as (System 1) intended for human consumption amended by the Construction Test Laboratory (1/5) : - Pipes (in installations for the Products (Amendment etc.) (System 3) transport/distribution/ storage of (EU Exit) Regulations 2019 gas/fuel intended for the and the Construction Products supply of building heating/cooling (Amendment etc.) (EU Exit) systems, from the external Regulations 2020. (cont’d) storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

FPC Certification 99/94/EC Precast EN 1168:2005 + A3:2011 Body normal/lightweight/autoclaved EN 12737:2004+A1:2007 (System 2+) aerated concrete products (1/1) : - EN 12794:2005 + A1:2007 Precast EN 13224:2004+A1:2007 normal/lightweight/autoclaved EN 13225:2013 aerated concrete products (for EN 14843:2007 structural use). EN 14844:2006+A2:2011 EN 14991:2007 EN 14992:2007 EN 15037-1:2008 EN 15037-2:2009 + A1:2011 EN 15037-4:2010 EN 15050:2007 EN 15258:2008 EN 15435:2008 EN 15498:2008

Annex V 98/214/EC EN 1090-1:2009 FPC Certification Structural metallic products and EN 1090-1:2009/AC:2010 Body ancillaries (2/4) EN 1090-1:2009+A1:2011 System 2+)

Mutual Recognition Conformity Low Voltage Products Designation as a CAB in Agreements between the UK Assessment accordance with Chapter 1 of and Australia/New Zealand Body the MRA

Assessment Manager: WC1 Page 66 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Personal Protective Module B PPE Product Types: Essential Health and Safety Equipment Regulations Type requirements Annex II of the (Regulation (EU) 2016/425 examination Equipment Providing Buoyancy aid Regulation as brought into UK law and amended) and the Personal Module C2 Equipment Providing Chest and Protective Equipment Conformity to Groin protection (Enforcement) Regulations type based on 2018 internal Equipment for eye protection production control plus Equipment Providing Face supervised protection product checks at random intervals Equipment for leg and/or foot and anti-slip protection Module D Conformity to Equipment Providing General Body type based on protection (Clothing) quality assurance of the production Equipment Providing Hand and Arm process protection

Equipment for Head protection

Equipment for Hearing protection

Equipment Providing Respiratory System protection

Providing Protection Against:

Equipment Providing Protection against Cold [> -50 °C]

Equipment Providing Protection against Cold [cold > -50 °C] [extreme cold < -50 °C]

Equipment Providing Protection against Cold [extreme cold < -50 °C]

Equipment Providing Protection against Heat [< 100 °C]

Equipment Providing Protection against Heat [> 100 °C and Fire and Flame]

Assessment Manager: WC1 Page 67 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Personal Protective Module B Equipment Providing Protection Essential Health and Safety Equipment Regulations Type against Heat [< 100 °C] [> 100 °C requirements Annex II of the (Regulation (EU) 2016/425 examination and Fire] Regulation as brought into UK law and amended) and the Personal Module C2 Protective equipment against Bullet Protective Equipment Conformity to wounds or knife stabs (Enforcement) Regulations type based on 2018 (cont’d.) internal Protective Equipment against production Drowning control plus supervised Protective Equipment against product checks at Electric Shock random intervals Protective Equipment against Module D Electrical and Magnetic Fields and Conformity to Waves type based on quality assurance Protective Equipment against Falls of the production from Heights process Protective Equipment against Hand- held Chain-saws

Protective Equipment against Harmful Biological Agents

Protective Equipment against Harmful Noise

Protective Equipment against Ionising Radiation

Protective Equipment against Mechanical Risks

Protective Equipment against Non- ionising Radiation

Protective Equipment against Slipping

Protective Equipment against Static Compression

Assessment Manager: WC1 Page 68 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Personal Protective Module B Protective Equipment against Essential Health and Safety Equipment Regulations Type Substances and Mixtures which are requirements Annex II of the (Regulation (EU) 2016/425 examination Hazardous to Health Regulation as brought into UK law and amended) and the Personal Module C2 Protective Equipment against Protective Equipment Conformity to Vibrations (Enforcement) Regulations type based on 2018 (cont’d.) internal Protective Equipment against risks production arising from a sports activity control plus supervised Specialised Area of Competence: product checks at Protective clothing against static random intervals electricity

Module D Specialised Area of Competence: Conformity to Protective clothing for use in welding type based on and allied processes quality assurance of the production Specialised Area of Competence: process Firefighters suits

Specialised Area of Competence: High Visibility Clothing

Specialised Area of Competence: Protective Clothing for Motorcycle Riders

Specialised Area of Competence: Protective Equipment for Diving

Specialised Area of Competence: Protective Equipment for use in Potentially Explosive Atmospheres

Assessment Manager: WC1 Page 69 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Pressure Equipment Directive: Article All descriptions of pressure Inspection Body Procedures (Safety) Regulations 2016 14: Annex III equipment and assemblies covered PP250 Regulation 42. by the Regulations in relation to the conformity assessment modules Conformity Assessment Modules

A2, B, C2, D, D1, E, E1, F, G, H, H1

Directive: Annex Categories II III and IV Inspection Body Procedures I – 3.1.2 PP250 Regulations: Approval of permanent joining Schedule 2 procedures and personnel ** paragraph 21.

Assessment Manager: WC1 Page 70 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Measuring Instruments EC Type All instruments as defined in Annex Taximeters Regulations 2016 Examination IX (MI-007) of the directive Annex IX (MI-007) Annex B

Declaration of Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Declaration of Conformity Based on Full Quality Assurance plus Design Examination Annex H1

Assessment Manager: WC1 Page 71 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Measuring Instruments EC Type All instruments as defined in Annex Water meters Regulations 2016 (cont’d) Examination III (MI-001) of the directive Annex III (MI-001) Annex B

Declaration of Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Assessment Manager: WC1 Page 72 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Measuring Instruments Declaration of All instruments as defined in Annex Gas meters and volume Regulations 2016 (cont’d) Conformity IV (MI-002) of the directive conversion devices Based on Full Annex IV (MI-002) Quality Assurance plus Design Examination Annex H1

EC Type Examination Annex B

Declaration of Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Declaration of Conformity Based on Full Quality Assurance plus Design Examination Annex H1

Assessment Manager: WC1 Page 73 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Measuring Instruments EC Type All instruments as defined in Annex Active Electrical Energy Meters Regulations 2016 (cont’d) Examination V (MI-003) of the directive Annex V (MI-003) Annex B

Declaration of Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Declaration of Conformity Based on Full Quality Assurance plus Design Examination Annex H1

Assessment Manager: WC1 Page 74 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

Gas Appliances Annex III.1 Domestic/Commercial – Examination and approval (Enforcement) and Module B: EU Type- against the Essential Miscellaneous Examination Appliances burning gaseous Requirements of Annex 1 and Amendment fuels used for cooking, assessment of quality system in Regulations 2018 Annex III.2 heating, hot water accordance with the relevant Module C2: Conformity to production, refrigeration, Module. Type lighting, and washing; forced Based on internal production draught burners, and control heating bodies to be equipped with such burners Annex III.3 Module D: Conformity to Type Fittings: Safety devices, Based on QA of the controlling devices, production process regulating devices, and sub- assemblies Annex III.4 Module E: Conformity to type based on Product QA

Annex III.5 Conformity to type based on Product Verification

Annex III.6 Conformity based on unit Verification

Assessment Manager: WC1 Page 75 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

The Merchant Shipping Chapter 4, Article 15 & Life Saving Appliances * In accordance with (Marine Equipment) Annex II* Implementing Acts Regulations 2016 MED 1 / 1.2b, 1.2c* (Article 35(2)) & Commission Module B: EC Type Regulation 2018/773/EU - Examination (Article 35(5)) via Article 40 Module D: Production QA concept of Directive 2014/90/EU Module E: Product QA Fire Protection Module F: Product Verification Module G: EC Unit Verification MED 1 / 3.1, 3.2, 3.7, 3.18b, 3.18c, 3.18e, 3.21, 3.29, 3.38, 3.41, 3.43, 3.46, 3.51, 3.52, 3.53, 3.55, 3.56, 3.70, 3.71*

Other Safety Equipment MED/7.1

Location: Milton Keynes

Note: The inspection of items marked thus * are subject to legislative requirements including the appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation

Assessment Manager: WC1 Page 76 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

Radio Equipment EU-type examination Fixed Link Regulations 2017 (Annex III) Fixed Wireless Access Industrial, Scientific and Conformity Based on Full Medical within the scope of Quality Assurance the directive (Annex IV) Mobile (Cellular) Telephone Handsets Paging (Radio Messaging) Private/Professional Mobile Radio Radio equipment operating below 9KHz Radio Frequency Identification (RFID) Radio Local Area Network Radio receivers (including broadcast radio and TV receivers) Short Range Devices TTE for fixed (wired) network (all types) Ultra-Wideband Applications Wireless Microphones Wireless Telephones

Assessment Manager: WC1 Page 77 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

Boiler (Efficiency) Module B (Annex III): EC type- Hot-water boilers fired with Examination and approval Regulations 1993 examination liquid or gaseous fuels with against the Essential a rated output of no less Requirements of Annex 1 and Module C (Annex IV): than 4 kW and no more than assessment of quality system in Conformity to type 400 kW accordance with the relevant Module. Module D (Annex IV): Production quality assurance

Module E (Annex IV): Product quality assurance

Assessment Manager: WC1 Page 78 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 95/467/EC Chimneys, flues and EN 12446:2003 Regulation 2011 (retained Body (System specific products (1/1) : - EN 12446:2011 EU law EUR 305/2011) as 2+) Prefabricated chimneys (storey EN 13063-1:2005+A1:2007 amended by the Construction height elements), flue liners EN 13069:2005 Products (Amendment etc.) (elements or blocks), multi-shell EN 13084-5:2005 (EU Exit) Regulations 2019 chimney (elements or blocks), single EN 13084-5:2005/AC:2006 and the Construction Products walled chimneys and attached EN 13084-7:2005 (Amendment etc.) (EU Exit) chimneys (chimneys). EN 13084-7:2005/AC:2009 Regulations 2020 EN 14471:2005 EN 1457-1:2012 EN 1457-2:2012 EN 1806:2006 EN 1856-1:2009 EN 1856-2:2009 EN 1857:2010 EN 1858:2008 EN 1858:2008+A1:2011

Product 95/467/EC Structural bearings (1/1) : EN 1337-3:2005 Certification Body - Structural bearings (in buildings EN 1337-4:2004 (System 1) and civil engineering works where EN 1337-4:2004/AC:2007 requirements on individual bearings EN 1337-5:2005 are critical). EN 1337-6:2004 EN 1337-7:2004 EN 1337-8:2007

96/577/EC Fire alarm/detection, EN 12416-1:2001 fixed fire-fighting, fire and smoke EN 12416-1:2001/A1:2004 control and explosion suppression EN 12416-2:2001 products (1/1) : - Dry powder systems-kits (fire safety).

Assessment Manager: WC1 Page 79 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 671-1:2001/AC:2002 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EN 671-2: 2001 EU law EUR 305/2011) as (System 1) control and explosion suppression EN 671-2:2001/A1:2004 amended by the Construction (cont’d) products (1/1) : - First aid hose Products (Amendment etc.) systems-kits (fire safety). (EU Exit) Regulations 2019 EN 671-1:2001 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 96/577/EC Fire alarm/detection, EN 12101-2:2003 (cont’d) fixed fire-fighting, fire and smoke EN 12101-3:2002 control and explosion suppression EN 12101-3:2002/AC:2005 products (1/1) : - Smoke and heat EN 12101-3:2015 exhaust ventilation systems-kits (fire safety).

96/577/EC Fire alarm/detection, EN 12094-9:2003 fixed fire-fighting, fire and smoke EN 54-10:2002 control and explosion suppression EN 54-10:2002/A1:2005 products (1/1) : - Smoke, heat and EN 54-12:2002 flame detectors (fire safety). EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006

96/577/EC Fire alarm/detection, EN 12094-12:2003 fixed fire-fighting, fire and smoke EN 14604:2005 control and explosion suppression EN 14604:2005/AC:2008 products (1/1) : - Alarm devices EN 54-23:2010 (fire safety). EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006

96/577/EC Fire alarm/detection, EN 12101-10:2005 fixed fire-fighting, fire and smoke EN 12101-10:2005/AC:2007 control and explosion suppression products (1/1) : - Power supplies (fire control components) (fire safety).

Assessment Manager: WC1 Page 80 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 12101-1:2005 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EN 12101-1:2005/A1:2006 EU law EUR 305/2011) as (System 1) control and explosion suppression amended by the Construction (cont’d) products (1/1) : - Smoke curtains Products (Amendment etc.) (fire safety). (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) 96/577/EC Fire alarm/detection, EN 12094-13:2001 Regulations 2020 fixed fire-fighting, fire and smoke EN 12094-13:2001/AC:2002 (cont’d) control and explosion suppression products (1/1) : - Check valves and non-return valves (fire safety).

96/577/EC Fire alarm/detection, EN 12094-11:2003 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Mechanical weighing devices (fire safety).

96/577/EC Fire alarm/detection, EN 12094-10:2003 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure gauges and pressure switches (fire safety).

96/577/EC Fire alarm/detection, EN 12094-2:2003 fixed fire-fighting, fire and smoke EN 12094-6:2006 control and explosion suppression products (1/1) : - Non-electrical disable devices (fire safety).

96/577/EC Fire alarm/detection, EN 12094-4:2004 fixed fire-fighting, fire and smoke EN 12094-5:2006 control and explosion suppression products (1/1) : - Selector valves and their actuators (fire safety).

Assessment Manager: WC1 Page 81 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 12094-3:2003 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EU law EUR 305/2011) as (System 1) control and explosion suppression amended by the Construction (cont’d) products (1/1) : - Multiple controls Products (Amendment etc.) (fire safety) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) 96/577/EC Fire alarm/detection, EN 14339:2005 Regulations 2020 fixed fire-fighting, fire and smoke EN 14384:2005 (cont’d) control and explosion suppression products (1/1) : - Fire hydrants (fire safety)

96/577/EC Fire alarm/detection, EN 54-11:2001/A1:2005 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety).

96/577/EC Fire alarm/detection, EN 54-18:2005 fixed fire-fighting, fire and smoke EN 54-18:2005/AC:2007 control and explosion suppression EN 54-24:2008 products (1/1) : - Input/output EN 54-25:2008 devices (fire safety) EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012

96/577/EC Fire alarm/detection, EN 54-17:2005 fixed fire-fighting, fire and smoke EN 54-17:2005/AC:2007 control and explosion suppression products (1/1) : - Short circuit isolators (fire safety).

96/577/EC Fire alarm/detection, EN 12094-7:2000 fixed fire-fighting, fire and smoke EN 12094-7:2000/A1:2005 control and explosion suppression EN 12259-1:1999 + products (1/1) : - A1:2001 Nozzles/sprinklers/outlets (fire EN 12259-1:1999+A1:01/A2:04 safety) EN 12259-1:1999+A1:01/A3:06

Assessment Manager: WC1 Page 82 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 12094-8:2006 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EU law EUR 305/2011) as (System 1) control and explosion suppression amended by the Construction (cont’d) products (1/1) : - Flexible Products (Amendment etc.) connectors (fire safety). (EU Exit) Regulations 2019 and the Construction Products

(Amendment etc.) (EU Exit) 96/577/EC Fire alarm/detection, EN 12094-4:2004 Regulations 2020 fixed fire-fighting, fire and smoke EN 12094-5:2006 (cont’d) control and explosion suppression products (1/1) : - High pressure container valve assemblies and their actuators (fire safety).

96/577/EC Fire alarm/detection, EN 12259-3:2000/A1:2001 fixed fire-fighting, fire and smoke EN 12259-3:2000/A2:2005 control and explosion suppression products (1/1) : - Dry alarm valve assemblies (fire safety).

96/577/EC Fire alarm/detection, EN 12259-2:1999/A1:2001 fixed fire-fighting, fire and smoke EN 12259-2:1999/A2:2005 control and explosion suppression EN 12259-2:1999/AC:2002 products (1/1) : - Wet alarm valve assemblies (fire safety).

96/577/EC Fire alarm/detection, EN 12259-5:2002 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Water flow detectors/switches (fire safety)

96/577/EC Fire alarm/detection, EN 12101-6:2005 fixed fire-fighting, fire and smoke EN 12101-6:2005/AC:2006 control and explosion suppression products (1/1) : - Pressure differential systems-kits (fire safety).

Assessment Manager: WC1 Page 83 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/577/EC Fire alarm/detection, EN 54-4:1997 Regulation 2011 (retained Certification Body fixed fire-fighting, fire and smoke EN 54-4:1997/A1:2002 EU law EUR 305/2011) as (System 1) control and explosion suppression EN 54-4:1997/A2:2006 amended by the Construction (cont’d) products (1/1) : - Power supplies EN 54-4:1997/AC:1999 Products (Amendment etc.) (fire detection/alarm components) (EU Exit) Regulations 2019 (fire safety). and the Construction Products (Amendment etc.) (EU Exit)

Regulations 2020 96/577/EC Fire alarm/detection, EN 12094-1:2003 (cont’d) fixed fire-fighting, fire and smoke EN 54-16:2008 control and explosion suppression EN 54-2:1997 products (1/1) : - Control and EN 54-2:1997/AC:1999 indicating devices (fire safety).

96/577/EC Fire alarm/detection, EN 12259-4:2000/A1:2001 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Sprinklers and water spray systems-kits (fire safety).

96/577/EC Fire alarm/detection, EN 13565-1:2003 fixed fire-fighting, fire and smoke EN 54-7:2000/A1:2002 control and explosion suppression EN 54-7:2000/A2:2006 products (1/1) : - Foam systems-kits (fire safety).

96/577/EC Fire alarm/detection, EN 54-21:2006 fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety).

Product 2011/284/EU Power, control and EN 50575:2014 + A1:2016 Certification Body communication cables (1/3):- Power, (System 1+) control and communication cables (for uses subject to regulations on reaction to fire)

Assessment Manager: WC1 Page 84 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/579/EC Circulation fixtures (1/2) : EN 1463-1:2009 Regulation 2011 (retained Certification Body - Road marking products: EU law EUR 305/2011) as (System 1) retroreflecting road studs (for amended by the Construction (cont’d) circulation area). Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products 96/579/EC Circulation fixtures (1/2) : EN 40-4:2005 (Amendment etc.) (EU Exit) - Road lighting columns (for EN 40-4:2005/AC:2006 Regulations 2020 circulation areas). EN 40-5:2002 (cont’d) EN 40-6:2002 EN 40-7:2002

96/579/EC Circulation fixtures (1/2) : EN 12966-1:2005+A1:2009 - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: variable message traffic signs (for circulation areas).

96/579/EC Circulation fixtures (1/2) : EN 12899-1:2007 - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent traffic signs (for circulation areas).

96/579/EC Circulation fixtures (1/2) : EN 12352:2006 - Road traffic signs and traffic EN 12899-3:2007 control devices installed permanently for vehicular and pedestrian uses: permanent warning devices and delineators (for circulation areas).

96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic EN 12368:2006 control devices installed permanently for vehicular and pedestrian uses: traffic lights and fixed danger lamps (for circulation areas).

Assessment Manager: WC1 Page 85 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 96/579/EC Circulation fixtures (1/2) : EN 1423:1997/A1:2003 Regulation 2011 (retained Certification Body - Road marking products: Drop-on EN 1423:2012 EU law EUR 305/2011) as (System 1) materials (glass beads, anti-skid EN 1463-1:2009 amended by the Construction (cont’d) aggregates and combinations of the Products (Amendment etc.) two) (for circulation areas). (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) 96/579/EC Circulation fixtures (1/2) : EN 1317-5:2007+A1:2008 Regulations 2020 - Vehicle restraint barriers: EN 1317-5:2007+A2:2012 (cont’d) transition barriers (for circulation areas).

96/579/EC Circulation fixtures (1/2) : EN 12899-2:2007 - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic bollards (for circulation areas).

Test Laboratory 96/579/EC Circulation fixtures (2/2) : EN 14388:2005 (System 3) - Road traffic noise reducing EN 14388:2005/AC:2008 devices and barriers (for circulation areas).

96/580/EC Curtain wallings (1/1) : - EN 13830:2003 Curtain wall kits (as external walls not subject to reaction to fire requirements), Curtain wall kits (as external walls subject to reaction to fire requirements).

Product 96/580/EC Curtain wallings (1/1) : - EN 13830:2003 Certification Body Curtain wall kits (as external walls (System 1) subject to reaction to fire requirements).

Assessment Manager: WC1 Page 86 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 96/581/EC Geotextiles (1/2) : - EN 13249:2000 Regulation 2011 (retained Body (System Geosynthetics (membranes and EN 13249:2000/A1:2005 EU law EUR 305/2011) as 2+) textiles), geotextiles, EN 13250:2000 amended by the Construction geocomposites, geogrids, EN 13250:2000/A1:2005 Products (Amendment etc.) geomembranes and EN 13251:2000 (EU Exit) Regulations 2019 geonets used: for drainage and/or EN 13251:2000/A1:2005 and the Construction Products filtration (in roads, railways, EN 13252:2000 (Amendment etc.) (EU Exit) foundations and walls, drainage EN 13252:2000/A1:2005 Regulations 2020 systems, erosioncontrol, reservoirs EN 13253:2000 (cont’d) and dams, canals, tunnels and EN 13253:2000/A1:2005 underground structures, liquid waste EN 13257:2000 disposal or containment, EN 13257:2000/A1:2005 for solid waste storage or waste EN 13257:2000/AC:2003 disposal). EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005

96/581/EC Geotextiles (1/2) : - EN 13257:2000 Geosynthetics (membranes and EN 13257:2000/A1:2005 textiles), geotextiles, EN 13257:2000/AC:2003 geocomposites, geogrids, EN 13265:2000 geomembranes and EN 13265:2000/A1:2005 geonets used: as fluid or gas EN 13265:2000/AC:2003 barriers (in roads, railways, EN 13361:2004 foundations and walls, drainage EN 13361:2004/A1:2006 systems, erosion control, reservoirs EN 13362:2005 and dams, canals, tunnels and EN 13491:2004 underground structures, liquid waste EN 13491:2004/A1:2006 disposal or containment, for solid EN 13492:2004 waste storage or waste disposal). EN 13492:2004/A1:2006 EN 13493:2005 EN 15382:2008

Assessment Manager: WC1 Page 87 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 96/581/EC Geotextiles (1/2) : - Regulation 2011 (retained Body (System Geosynthetics (membranes and EN 13257:2000 EU law EUR 305/2011) as 2+) (cont’d) textiles), geotextiles, EN 13257:2000/A1:2005 amended by the Construction geocomposites, geogrids, EN 13257:2000/AC:2003 Products (Amendment etc.) geomembranes and EN 13265:2000 (EU Exit) Regulations 2019 geonets used: for reinforcement (in EN 13265:2000/A1:2005 and the Construction Products roads, railways, foundations and EN 13265:2000/AC:2003 (Amendment etc.) (EU Exit) walls, drainage systems, erosion EN 13361:2004 Regulations 2020 control, reservoirs and dams, EN 13361:2004/A1:2006 (cont’d) canals, tunnels and underground EN 13362:2005 structures, liquid waste disposal or EN 13491:2004 containment, for solid EN 13491:2004/A1:2006 waste storage or waste disposal). EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15381:2008

Assessment Manager: WC1 Page 88 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 96/581/EC Geotextiles (1/2) : - EN 13249:2000 Regulation 2011 (retained Body (System Geosynthetics (membranes and EN 13249:2000/A1:2005 EU law EUR 305/2011) as 2+) (cont’d) textiles), geotextiles, EN 13250:2000 amended by the Construction geocomposites, geogrids, EN 13250:2000/A1:2005 Products (Amendment etc.) geomembranes and EN 13251:2000 (EU Exit) Regulations 2019 geonets used: as protective layer (in EN 13251:2000/A1:2005 and the Construction Products roads, railways, foundations and EN 13252:2000 (Amendment etc.) (EU Exit) walls, drainage systems, erosion EN 13252:2000/A1:2005 Regulations 2020 control, reservoirs and dams, EN 13253:2000 (cont’d) canals, tunnels and underground EN 13253:2000/A1:2005 structures, liquid waste disposal or EN 13254:2000 containment, for solid EN 13254:2000/A1:2005 waste storage or waste disposal). EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005

97/176/EC Structural timber EN 14250:2010 products (1/3) : - Solid structural timber products; Kits (trusses, floors, walls, roofs, frames) (bridges, railtracks and buildings).

Assessment Manager: WC1 Page 89 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 97/176/EC Structural timber EN 14081-1:2005+A1:2011 Regulation 2011 (retained Body (System products (1/3) : - Solid structural EN 14250:2010 EU law EUR 305/2011) as 2+) (cont’d) timber amended by the Construction products: Elements (bridge Products (Amendment etc.) elements, truss elements, (EU Exit) Regulations 2019 sleepers, floor elements, wall and the Construction Products elements, roof elements such (Amendment etc.) (EU Exit) as beams, arches, joists, rafters, Regulations 2020 columns, poles, piles) (cont’d) (bridges, railtracks and buildings).

Product 97/176/EC Structural timber EN 14080:2005 Certification Body products (2/3) : - Structural glued (System 1) laminated products and other glued timber products: Kits (trusses, floors, walls, roofs, frames) (for bridges and buildings).

97/176/EC Structural timber EN 14080:2005 products (2/3) : - Structural glued EN 14374:2004 laminated products and other glued timber products: Elements (bridge elements, truss elements, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (for bridges and buildings).

FPC Certification 97/462/EC Wood-based panels (1/2) EN 13986:2004 +A1:2015 Body (System : - Unfaced overlaid and veneered 2+) or coated wood-based panels (for structural elements in internal or external applications).

Assessment Manager: WC1 Page 90 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 97/462/EC Wood-based panels (1/2) EN 13986:2004 +A1:2015 Regulation 2011 (retained Certification Body : - Unfaced overlaid and veneered EU law EUR 305/2011) as (System 1) or coated wood-based panels (for amended by the Construction structural elements in internal or Products (Amendment etc.) external application). (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Test Laboratory 97/464/EC Waste water engineering EN 1433:2002 Regulations 2020 (System 3) products outside buildings (2/3) : - EN 1433:2002/A1:2005 (cont’d) Prefabricated drainage channel (to be used outside buildings, for waste water from buildings and civil engineering works including roads).

Product 97/555/EC EN 413-1:2004 Certification Body Cements, building limes and other EN 413-1:2011 (System 1+) hydraulic binders : - Masonry cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

97/555/EC Cements, building limes EN 14216:2004 and other hydraulic binders :- EN 197-1:2000 Common cements, including: - EN 197-1:2000/ A1:2004 Portland cement, -Portland EN 197-1:2000/A3:2007 composite cements: Portland-slag EN 197-1:2011 cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

Assessment Manager: WC1 Page 91 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 97/555/EC Cements, building limes EN 459-1:201 Regulation 2011 (retained Body (System 2) and other hydraulic binders : - EU law EUR 305/2011) as Building limes, including: amended by the Construction -Calcium limes Products (Amendment etc.) -Dolomitic limes, (EU Exit) Regulations 2019 -Hydraulic limes (preparation of and the Construction Products concrete, mortar, grout and (Amendment etc.) (EU Exit) other mixes for construction and for Regulations 2020 the manufacture of construction (cont’d) products).

FPC Certification 97/555/EC Cements, building limes EN 13282-1:2013 Body (System and other hydraulic binders : - 2+) Rapid hardening hydraulic road binders (preparation of concrete, mortar, grout and other mixes for road bases stabilisation)

Product 97/555/EC Cements, building limes EN 14647:2005 Certification Body and other hydraulic binders : - EN 14647:2005/AC:2006 (System 1+) Calcium aluminate cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

97/555/EC Cements, building limes EN 14216:2004 and other hydraulic binders : - EN 15743:2010 Special cements, including: -low heat cements, -sulfate resisting cement, -white cement, - sea water resisting cement, -low alkali cement (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

Assessment Manager: WC1 Page 92 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 97/740/EC Masonry and related EN 998-2:2016 Regulation 2011 (retained Body (System products (1/3) : - Factory-made, EU law EUR 305/2011) as 2+) designed masonry mortars (in walls, amended by the Construction columns and partitions). Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products 97/740/EC Masonry and related EN 771-1:2011 + A1:2015 (Amendment etc.) (EU Exit) products (1/3) : - Masonry units EN 771-2:2011 Regulations 2020 category I (in walls, columns and EN 771-3:2011 + A1:2015 (cont’d) partitions). EN 771-4:2011 + A1:2015 EN 771-5:2011 + A1:2015 EN 771-6:2011

Product 97/808/EC Floorings (2/2) : - EN 14041:2004 Certification Body Resilient and textile floorings - EN 14041:2004/AC:2006 (System 1) homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses).

97/808/EC Floorings (2/2) : - Floor EN 13454-1:2004 screed materials (for internal uses). EN 13813:2002

Assessment Manager: WC1 Page 93 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/214/EC Structural metallic EN 10025-1:2004 Regulation 2011 (retained Body (System products and ancillaries (1/4) : - EN 10219-1:2006 EU law EUR 305/2011) as 2+) Structural metallic sections/profiles: EN 15088:2005 amended by the Construction hot rolled, cold formed or otherwise Products (Amendment etc.) produced sections/profiles with (EU Exit) Regulations 2019 various shapes (T, L, H, U, Z, and the Construction Products I, channels, angle, hollow, tubes), (Amendment etc.) (EU Exit) flat products (plate, sheet, Regulations 2020 strip), bars, castings, forgings made (cont’d) of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures).

98/214/EC Structural metallic EN 13479:2004 products and ancillaries (3/4) : - Welding materials (for uses in structural metallic works).

98/214/EC Structural metallic EN 14399-1:2005 products and ancillaries (4/4) : - Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works).

Test Laboratory 98/436/EC Roof coverings, EN 12951:2004 (System 3) rooflights, roof windows and ancillary products (6/6) : - Roof access systems, walkways and footholds (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).

Assessment Manager: WC1 Page 94 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 98/436/EC Roof coverings, EN 1873:2005 Regulation 2011 (retained (System 3) rooflights, roof windows and EU law EUR 305/2011) as (cont’d) ancillary amended by the Construction products (6/6) : - Rooflights (for uses Products (Amendment etc.) other than those specified in families (EU Exit) Regulations 2019 (1/6), (2/6), (3/6), (4/6), (5/6)). and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 98/437/EC Internal and external wall BS EN 13964:2014 (cont’d) and ceiling finishes (1/5) : - Suspended ceilings (kits) (as internal or external finishes used for fire protection of ceilings).

Product 98/437/EC Internal and external wall BS EN 13964:2014 Certification Body and ceiling finishes (3/5): - (System 1) Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).

98/437/EC Internal and external wall EN 14716:2004 and ceiling finishes (3/5) : - Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).

98/437/EC Internal and external wall EN 438-7:2005 and ceiling finishes (3/5) : - Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).

Assessment Manager: WC1 Page 95 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 Regulation 2011 (retained Body (System high safety requirements (2/2) : - EN 13043:2002 EU law EUR 305/2011) as 2+) Aggregates for bituminous mixtures EN 13043:2002/AC:2004 amended by the Construction and surface treatments EN 13055-1:2002 Products (Amendment etc.) (for roads and other civil engineering EN 13055-1:2002/AC:2004 (EU Exit) Regulations 2019 works). EN 13055-2:2004 and the Construction Products EN 13139:2002 (Amendment etc.) (EU Exit) EN 13139:2002/AC:2004 Regulations 2020 EN 13242:2002+A1:2007 (cont’d) EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Armourstones (for hydraulic EN 13043:2002/AC:2004 structures and other civil EN 13055-1:2002 engineering works). EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Aggregates for unbound and EN 13043:2002/AC:2004 hydraulically bound mixtures (for EN 13055-1:2002 roads and other civil engineering EN13055-1:2002/AC:2004 works). EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

Assessment Manager: WC1 Page 96 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 Regulation 2011 (retained Body (System high safety requirements (2/2) : - EN 13043:2002 EU law EUR 305/2011) as 2+) (cont’d) Fillers for bituminous mixtures and EN 13043:2002/AC:2004 amended by the Construction surface treatments (for EN 13055-1:2002 Products (Amendment etc.) roads and other civil engineering EN13055-1:2002/AC:2004 (EU Exit) Regulations 2019 works). EN 13055-2:2004 and the Construction Products EN 13139:2002 (Amendment etc.) (EU Exit) EN 13139:2002/AC:2004 Regulations 2020 EN 13242:2002+A1:2007 (cont’d) EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Aggregates and fillers for concrete, EN 13043:2002/AC:2004 mortar and grout (in buildings, roads EN 13055-1:2002 and other civil engineering work). EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with EN 12620:2002+A1:2008 high safety requirements (2/2) : - EN 13043:2002 Railway ballast (for railway works). EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

Assessment Manager: WC1 Page 97 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products FPC Certification 98/601/EC Road construction EN 13108-1:2006 Regulation 2011 (retained Body (System products (1/2) : - Bituminous EN 13108-1:2006/AC:2008 EU law EUR 305/2011) as 2+) (cont’d) mixtures (for road construction and EN 13108-2:2006 amended by the Construction surface treatment of roads). EN 13108-2:2006/AC:2008 Products (Amendment etc.) EN 13108-3:2006 (EU Exit) Regulations 2019 EN 13108-3:2006/AC:2008 and the Construction Products EN 13108-4:2006 (Amendment etc.) (EU Exit) EN 13108-4:2006/AC:2008 Regulations 2020 EN 13108-5:2006 (cont’d) EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN 13108-7:2006 EN 13108-7:2006/AC:2008

98/601/EC Road construction EN 12591:2009 products (1/2) : - Bitumen (for road EN 13808:2005 construction and surface treatment EN 13924:2006 of roads). EN 13924:2006/AC:2006 EN 14023:2010

98/601/EC Road construction EN 12271:2006 products (1/2) : - Surface treatments EN 12273:2008 (for surface treatments of roads).

98/601/EC EN 14695:2010 Road construction products (1/2) : - Bridge deck waterproofing products and kits (for bridge decks).

99/90/EC Membranes (1/3) : - Roof EN 13707:2004+A2:2009 sheets (in buildings). EN 13956:2005 EN 13956:2005/AC:2006

99/90/EC Membranes (1/3) : - Damp EN 13967:2004 proofing sheets (in buildings). EN 13967:2004/A1:2006

EN 13969:2004 EN 13969:2004/A1:2006

Assessment Manager: WC1 Page 98 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/90/EC Membranes (1/3) : - Water EN 13859-1:2005+A1:2008 Regulation 2011 (retained (System 3) vapour control layers (in EN 13859-2:2010 EU law EUR 305/2011) as buildings). EN 13970:2004 amended by the Construction EN 13970:2004/A1:2006 Products (Amendment etc.) EN 13984:2004 (EU Exit) Regulations 2019 EN 13984:2004/A1:2006 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 99/90/EC Membranes (1/3) : - Roof EN 13859-1:2005+A1:2008 (cont’d) underlays (in buildings).

99/90/EC Membranes (1/3) : - Damp EN 14909:2006 proof courses (in buildings). EN 14967:2006

Product 99/90/EC Membranes (2/3) : - Water EN 13859-1:2005+A1:2008 Certification Body vapour control layers (for uses EN 13859-2:2010 (System 1) subject to reaction to fire EN 13970:2004 regulations). EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006

99/90/EC Membranes (2/3) : - Roof EN 13707:2004+A2:2009 sheets (for uses subject to reaction EN 13956:2005 to fire regulations). EN 13956:2005/AC:2006

99/90/EC Membranes (2/3) : - Roof EN 13859-1:2005+A1:2008 underlays (for uses subject to reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 14909:2006 proof courses (for uses subject to EN 14967:2006 reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 13967:2004 proofing sheets (for uses subject to EN 13967:2004/A1:2006 reaction to fire regulations). EN 13969:2004 EN 13969:2004/A1:2006

Assessment Manager: WC1 Page 99 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/90/EC Membranes (2/3) : - Water EN 13859-1:2005+A1:2008 Regulation 2011 (retained (System 3) vapour control layers (for uses EN 13859-2:2010 EU law EUR 305/2011) as subject to reaction to fire EN 13970:2004 amended by the Construction regulations). EN 13970:2004/A1:2006 Products (Amendment etc.) EN 13984:2004 (EU Exit) Regulations 2019 EN 13984:2004/A1:2006 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 99/90/EC Membranes (2/3) : - Roof EN 13707:2004+A2:2009 (cont’d) sheets (for uses subject to reaction EN 13956:2005 to fire regulations). EN 13956:2005/AC:2006

99/90/EC Membranes (2/3) : - Roof EN 13859-1:2005+A1:2008 underlays (for uses subject to reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 14909:2006 proof courses (for uses subject to EN 14967:2006 reaction to fire regulations).

99/90/EC Membranes (2/3) : - Damp EN 13967:2004 proofing sheets (for uses subject EN 13967:2004/A1:2006 to reaction to fire regulations). EN 13969:2004 EN 13969:2004/A1:2006

Assessment Manager: WC1 Page 100 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 99/91/EC Thermal insulating EN 13162:2012 + A1:2015 Regulation 2011 (retained Certification Body products (2/2) : - Thermal insulating EN 13163:2008 EU law EUR 305/2011) as (System 1) products (factory-made products EN 13164:2008 amended by the Construction and products intended to be formed EN 13165:2008 Products (Amendment etc.) in-situ) (for uses subject to EN 13166:2008 (EU Exit) Regulations 2019 regulations on reaction to fire). EN 13167:2008 and the Construction Products EN 13168:2008 (Amendment etc.) (EU Exit) EN 13169:2008 Regulations 2020 EN 13170:2008 (cont’d) EN 13171:2008 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009 + A1:2013 EN 14304:2009 EN 14305:2009 EN 14306:2009 EN 14307:2009 EN 14308:2009 EN 14309:2009 EN 14313:2009 EN 14314:2009 EN 14316-1:2004 EN 14317-1:2004

99/93/EC Doors, windows, shutters, EN 1125:2008 blinds, gates and related building EN 1154:1996/A1:2002 hardware (1/1) : - Building hardware EN related to doors, gates 1154:1996/A1:2002/AC:2006 and windows (fire/smoke EN compartmentation and on escape 1155:1996/A1:2002/AC:2006 routes). EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003

Assessment Manager: WC1 Page 101 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Calculation body 99/93/EC Doors, windows, shutters, EN 13241-1:2003 Regulation 2011 (retained blinds, gates and related building EN 13241-1:2003+A1:2011 EU law EUR 305/2011) as Test Laboratory hardware (1/1) : - Doors and gates EN 14351-1:2006+A1:2010 amended by the Construction (System 3) (with or without related hardware) Products (Amendment etc.) (other declared specific uses and/or (EU Exit) Regulations 2019 uses subject to other specific and the Construction Products requirements, in particular noise, (Amendment etc.) (EU Exit) energy, tightness and safety-in-use Regulations 2020 (i.e. NOT for fire/smoke (cont’d) compartmentation, NOT for escape routes).

Product 99/93/EC Doors, windows, shutters, EN 14351-1:2006 + A1:2010 Certification Body blinds, gates and related building EN 14351-1:2006 + A2:2016 (System 1) hardware (1/1) : - Doors and gates EN 16034:2014 (with or without related hardware) (fire/smoke compartmentation and on escape routes).

Calculation body 99/93/EC Doors, windows, shutters, EN 14351-1:2006+A1:2010 blinds, gates and related building Test Laboratory hardware (1/1) : - Windows (with or (System 3) without related hardware) (any other).

Product 99/469/EC Products related to EN 14889-1:2006 Certification Body concrete, mortar and grout (1/2) : - EN 14889-2:2006 (System 1) Fibres (for structural uses in concrete, mortar and grout).

Assessment Manager: WC1 Page 102 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 99/469/EC Products related to EN 450-1:2012 Regulation 2011 (retained Certification Body concrete, mortar and grout (1/2) : - EU law EUR 305/2011) as (System 1+) Additions (Type II) (for concrete, amended by the Construction mortar and grout) Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products FPC Certification 99/469/EC Products related to EN 1504-2:2004 (Amendment etc.) (EU Exit) Body (System concrete, mortar and grout (1/2) : - EN 1504-3:2005 Regulations 2020 2+) Concrete protection and repair EN 1504-4:2004 (cont’d) products (for other uses in buildings EN 1504-5:2004 and civil engineering works). EN 1504-6:2006 EN 1504-7:2006

99/469/EC Products related to EN 12878:2005 concrete, mortar and grout (1/2) : - EN 12878:2005/AC:2006 Additions (type I) (for concrete, mortar and grout).

99/469/EC Products related to EN 934-2:2009 + A1:2012 concrete, mortar and grout (1/2) : - EN 934-3:2009 + A1:2012 Admixtures (for concrete, mortar and grout)

Test Laboratory 99/472/EC Pipes, tanks and EN 1057:2006+A1:2010 (System 3) ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

Assessment Manager: WC1 Page 103 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/472/EC Pipes, tanks and EN 682:2002 Regulation 2011 (retained (System 3) ancillaries not in contact with water EN 682:2002/A1:2005 EU law EUR 305/2011) as (cont’d) intended for human consumption amended by the Construction (1/5) : - Fittings, adhesives, joints, Products (Amendment etc.) joint sealings and gaskets (in (EU Exit) Regulations 2019 installations for the and the Construction Products transport/distribution/ storage of (Amendment etc.) (EU Exit) gas/fuel intended for the Regulations 2020 supply of building heating/cooling (cont’d) systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

Product 99/472/EC Pipes, tanks and EN 1057:2006+A1:2010 Certification Body ancillaries not in contact with water (System 1) intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building), Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).

Assessment Manager: WC1 Page 104 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 99/472/EC Pipes, tanks and EN 1057:2006+A1:2010 Regulation 2011 (retained (System 3) ancillaries not in contact with water EU law EUR 305/2011) as intended for human consumption amended by the Construction (4/5) : - Pipes (in installations in Products (Amendment etc.) areas subject to reaction to fire (EU Exit) Regulations 2019 regulations, used for the and the Construction Products transport/disposal/storage of water (Amendment etc.) (EU Exit) not intended for human Regulations 2020 consumption). (cont’d)

Product 2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 Certification Body glass and glass-block products (1/6) (System 1) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance).

2000/245/EC Flat glass, profiled EN 1096-4:2004 glass and glass-block products (1/6) EN 12150-2:2004 : - Flat or curved glass panels (for EN 12337-2:2004 use in a glazed assembly EN 13024-2:2004 intended specifically to provide fire EN 14178-2:2004 resistance). EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing).

Assessment Manager: WC1 Page 105 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 2000/245/EC Flat glass, profiled EN 1096-4:2004 Regulation 2011 (retained Certification Body glass and glass-block products (4/6) EN 12150-2:2004 EU law EUR 305/2011) as (System 1) : - Flat or curved glass panels (for EN 12337-2:2004 amended by the Construction (cont’d) use as anti-bullet, or EN 1279-5:2005+A2:2010 Products (Amendment etc.) anti-explosion glazing). EN 13024-2:2004 (EU Exit) Regulations 2019 EN 14178-2:2004 and the Construction Products EN 1748-1-2:2004 (Amendment etc.) (EU Exit) EN 1748-2-2:2004 Regulations 2020 EN 1863-2:2004 (cont’d) EN 572-9:2004

Test Laboratory 2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 (System 3) glass and glass-block products (4/6) : - Insulating glass units (for other uses liable to present "safety-in-use" risks and subject to such regulations).

2000/245/EC Flat glass, profiled EN 1096-4:2004 glass and glass-block products (4/6) EN 12150-2:2004 : - Flat or curved glass panels (for EN 12337-2:2004 other uses liable to present EN 13024-2:2004 "safety-in-use" risks and subject to EN 14178-2:2004 such regulations). EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

2000/245/EC Flat glass, profiled EN 1279-5:2005+A2:2010 glass and glass-block products (5/6) : - Insulating glass units (for uses relating to energy conservation and/or noise reduction).

Assessment Manager: WC1 Page 106 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Test Laboratory 2000/245/EC Flat glass, profiled EN 14179-2:2005 Regulation 2011 (retained (System 3) glass and glass-block products (5/6) EU law EUR 305/2011) as (cont’d) : - Flat or curved glass panels amended by the Construction (specially treated) (for uses 2 Products (Amendment etc.) relating to energy conservation (EU Exit) Regulations 2019 and/or noise reduction). and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 Product 99/472/EC Pipes, tanks and EN 331:1998 (cont’d) Certification Body ancillaries not in contact with water EN 331:1998/A1:2010 (system 1) intended for human consumption Test Laboratory (4/5) :- Valves and taps (in (System 3) installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

FPC Certification 95/467/EC Chimneys, flues and EN 416-1:2009 Body (System specific products (1/1) : - EN 621:2009 2+) Prefabricated EN 777-1:2009 chimneys (storey height elements), EN 777-2:2009 flue liners (elements or EN 777-3:2009 blocks), multi-shell chimney EN 777-4:2009 (elements or blocks), single EN 778:2009 walled chimneys and attached EN 1020:2009 chimneys (chimneys). EN 1319:2009

Assessment Manager: WC1 Page 107 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Construction Products Product 99/472/EC Pipes, tanks and EN 14800:2007 Regulation 2011 (retained Certification Body ancillaries not in contact with water EN 15069:2008 EU law EUR 305/2011) as (System 1) intended for human consumption amended by the Construction Test Laboratory (1/5) : - Pipes (in installations for the Products (Amendment etc.) (System 3) transport/distribution/ storage of (EU Exit) Regulations 2019 gas/fuel intended for the and the Construction Products supply of building heating/cooling (Amendment etc.) (EU Exit) systems, from the external Regulations 2020 storage reservoir or the last (cont’d) pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

FPC Certification 99/94/EC Precast EN 1168:2005 + A3:2011 Body normal/lightweight/autoclaved EN 12737:2004+A1:2007 (System 2+) aerated concrete products (1/1) : - EN 12794:2005 + A1:2007 Precast EN 13224:2004+A1:2007 normal/lightweight/autoclaved EN 13225:2013 aerated concrete products (for EN 14843:2007 structural use). EN 14844:2006+A2:2011 EN 14991:2007 EN 14992:2007 EN 15037-1:2008 EN 15037-2:2009 + A1:2011 EN 15037-4:2010 EN 15050:2007 EN 15258:2008 EN 15435:2008 EN 15498:2008

Annex V 98/214/EC EN 1090-1:2009 FPC Certification Structural metallic products and EN 1090-1:2009/AC:2010 Body ancillaries (2/4) EN 1090-1:2009+A1:2011 System 2+)

Mutual Recognition Conformity Low Voltage Products Designation as a CAB in Agreements between the UK Assessment accordance with Chapter 1 of and Australia/New Zealand Body the MRA

Assessment Manager: WC1 Page 108 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Personal Protective Module B PPE Product Types: Essential Health and Safety Equipment Regulations Type requirements Annex II of the (Regulation (EU) 2016/425) examination Equipment Providing Buoyancy aid Regulation and the Personal Protective Equipment (Enforcement) Module C2 Equipment Providing Chest and Regulations 2018 Conformity to Groin protection type based on internal Equipment for eye protection production control plus Equipment Providing Face supervised protection product checks at random intervals Equipment for leg and/or foot and anti-slip protection Module D Conformity to Equipment Providing General Body type based on protection (Clothing) quality assurance of the production Equipment Providing Hand and Arm process protection

Equipment for Head protection

Equipment for Hearing protection

Equipment Providing Respiratory System protection

Providing Protection Against:

Equipment Providing Protection against Cold [> -50 °C]

Equipment Providing Protection against Cold [cold > -50 °C] [extreme cold < -50 °C]

Equipment Providing Protection against Cold [extreme cold < -50 °C]

Equipment Providing Protection against Heat [< 100 °C]

Equipment Providing Protection against Heat [> 100 °C and Fire and Flame]

Assessment Manager: WC1 Page 109 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Personal Protective Module B Equipment Providing Protection Essential Health and Safety Equipment Regulations Type against Heat [< 100 °C] [> 100 °C requirements Annex II of the (Regulation (EU) 2016/425) examination and Fire] Regulation and the Personal Protective Equipment (Enforcement) Module C2 Protective equipment against Bullet Regulations 2018 Conformity to wounds or knife stabs (cont’d) type based on internal Protective Equipment against production Drowning control plus supervised Protective Equipment against product checks at Electric Shock random intervals Protective Equipment against Module D Electrical and Magnetic Fields and Conformity to Waves type based on quality assurance Protective Equipment against Falls of the production from Heights process Protective Equipment against Hand- held Chain-saws

Protective Equipment against Harmful Biological Agents

Protective Equipment against Harmful Noise

Protective Equipment against Ionising Radiation

Protective Equipment against Mechanical Risks

Protective Equipment against Non- ionising Radiation

Protective Equipment against Slipping

Protective Equipment against Static Compression

Assessment Manager: WC1 Page 110 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Personal Protective Module B Protective Equipment against Essential Health and Safety Equipment Regulations Type Substances and Mixtures which are requirements Annex II of the (Regulation (EU) 2016/425) examination Hazardous to Health Regulation and the Personal Protective Equipment (Enforcement) Module C2 Protective Equipment against Regulations 2018 Conformity to Vibrations (cont’d) type based on internal Protective Equipment against risks production arising from a sports activity control plus supervised Specialised Area of Competence: product checks at Protective clothing against static random intervals electricity

Module D Specialised Area of Competence: Conformity to Protective clothing for use in welding type based on and allied processes quality assurance of the production Specialised Area of Competence: process Firefighters suits

Specialised Area of Competence: High Visibility Clothing

Specialised Area of Competence: Protective Clothing for Motorcycle Riders

Specialised Area of Competence: Protective Equipment for Diving

Specialised Area of Competence: Protective Equipment for use in Potentially Explosive Atmospheres

Assessment Manager: WC1 Page 111 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Pressure Equipment Directive: Article All descriptions of pressure Inspection Body Procedures (Directive 2014/68/EU) 14: Annex III equipment and assemblies covered PP250 implemented in Northern Regulation 42. by the Regulations in relation to the Ireland by the Pressure conformity assessment modules Equipment (Safety) Conformity Regulation 2016 Assessment Modules

A2, B, C2, D, D1, E, E1, F, G, H, H1

Directive: Annex Categories II III and IV Inspection Body Procedures I – 3.1.2 PP250 Regulations: Approval of permanent joining Schedule 2 procedures and personnel ** paragraph 21.

Assessment Manager: WC1 Page 112 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Directive 2009/23/EC EC Type All instruments as defined in Annex Taximeters Measuring Instruments Examination IX (MI-007) of the directive Annex IX (MI-007) implemented in Northern Annex B Ireland by the Measuring Instruments Regulations 2016 Declaration of Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Declaration of Conformity Based on Full Quality Assurance plus Design Examination Annex H1

Assessment Manager: WC1 Page 113 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Directive 2009/23/EC EC Type All instruments as defined in Annex Water meters Measuring Instruments Examination III (MI-001) of the directive Annex III (MI-001) implemented in Northern Annex B Ireland by the Measuring Instruments Regulations 2016 Declaration of (cont’d) Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Assessment Manager: WC1 Page 114 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Directive 2009/23/EC Declaration of All instruments as defined in Annex Gas meters and volume Measuring Instruments Conformity IV (MI-002) of the directive conversion devices implemented in Northern Based on Full Annex IV (MI-002) Ireland by the Measuring Quality Instruments Regulations 2016 Assurance plus (cont’d) Design Examination Annex H1

EC Type Examination Annex B

Declaration of Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Declaration of Conformity Based on Full Quality Assurance plus Design Examination Annex H1

Assessment Manager: WC1 Page 115 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Conformity Essential requirements: Assessment Category of products or Directive / Regulation Product specification / procedure/ individual products Properties/Standards Module/article

Directive 2009/23/EC EC Type All instruments as defined in Annex Active Electrical Energy Meters Measuring Instruments Examination V (MI-003) of the directive Annex V (MI-003) implemented in Northern Annex B Ireland by the Measuring Instruments Regulations 2016 Declaration of (cont’d) Conformity to Type Based on the Quality Assurance of the Production Process Annex D

Declaration of Conformity to Type Based on Product Verification Annex F

Declaration of Conformity Based on Full Quality Assurance plus Design Examination Annex H1

Assessment Manager: WC1 Page 116 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

Gas Appliances Annex III.1 Domestic/Commercial – Examination and approval (Regulation (EU) Module B: EU Type- against the Essential 2016/426) implemented Examination Appliances burning gaseous Requirements of Annex 1 and in Northern Ireland by fuels used for cooking, assessment of quality system in the Gas Appliances Annex III.2 heating, hot water accordance with the relevant (Enforcement) and Module C2: Conformity to production, refrigeration, Module. Miscellaneous Type lighting, and washing; forced Amendment Regulations Based on internal production draught burners, and 2018 control heating bodies to be (cont’d) equipped with such burners Annex III.3 Module D: Conformity to Type Fittings: Safety devices, Based on QA of the controlling devices, production process regulating devices, and sub- assemblies Annex III.4 Module E: Conformity to type based on Product QA

Annex III.5 Conformity to type based on Product Verification

Annex III.6 Conformity based on unit Verification

Assessment Manager: WC1 Page 117 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

Marine Equipment Chapter 4, Article 15 & Life Saving Appliances * In accordance with (Directive 2014/90/EU) Annex II* Implementing Acts implemented in Northern MED 1 / 1.2b, 1.2c* (Article 35(2)) & Commission Ireland by the Merchant Module B: EC Type Regulation 2018/773/EU - Shipping (Marine Examination (Article 35(5)) via Article 40 Equipment) Regulations Module D: Production QA concept of Directive 2014/90/EU 2016 Module E: Product QA Fire Protection Module F: Product Verification Module G: EC Unit Verification MED 1 / 3.1, 3.2, 3.7, 3.18b, 3.18c, 3.18e, 3.21, 3.29, 3.38, 3.41, 3.43, 3.46, 3.51, 3.52, 3.53, 3.55, 3.56, 3.70, 3.71*

Other Safety Equipment MED/7.1

Location: Milton Keynes

Note: The inspection of items marked thus * are subject to legislative requirements including the appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation

Assessment Manager: WC1 Page 118 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

Radio Equipment EU-type examination Fixed Link (Directive 2014/53/EU) (Annex III) Fixed Wireless Access implemented in Northern Industrial, Scientific and Ireland by the Radio Conformity Based on Full Medical within the scope of Equipment Regulations Quality Assurance the directive 2017 (Annex IV) Mobile (Cellular) Telephone Handsets Paging (Radio Messaging) Private/Professional Mobile Radio Radio equipment operating below 9KHz Radio Frequency Identification (RFID) Radio Local Area Network Radio receivers (including broadcast radio and TV receivers) Short Range Devices TTE for fixed (wired) network (all types) Ultra-Wideband Applications Wireless Microphones Wireless Telephones

Assessment Manager: WC1 Page 119 of 120

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

0003 BSI Assurance UK Limited

Issue No: 218 Issue date: 16 September 2021 Accredited to ISO/IEC 17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5 Methods / Procedures Directive / Conformity Assessment Category of products or Essential requirements: Regulation procedure/ Module/article individual products Product specification / Properties/Standards

Boiler Efficiency Module B (Annex III): EC type- Hot-water boilers fired with Examination and approval (Directive 92/42/EEC) examination liquid or gaseous fuels with against the Essential implemented in Northern a rated output of no less Requirements of Annex 1 and Ireland by the Boiler Module C (Annex IV): than 4 kW and no more than assessment of quality system in (Efficiency) Regulations Conformity to type 400 kW accordance with the relevant 1993 Module. Module D (Annex IV): Production quality assurance

Module E (Annex IV): Product quality assurance

Locations where Notified Body activities covered by the above Accreditation Standard are undertaken

BSI BSI Kitemark Court Holywell Park Davy Avenue Ashby Road Knowlhill Loughborough Milton Keynes Leicestershire MK5 8PP LE11 3AQ UNITED KINGDOM UNITED KINGDOM

BSI Kitemark House Maylands Avenue Hemel Hempstead Hertfordshire HP2 4SQ UNITED KINGDOM

END

Assessment Manager: WC1 Page 120 of 120