IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS

1. I.S. EN 152-2:1988/AC1:1989 Date published 11 APRIL 2011 Test methods for wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Part 2 : Application by methods other than brushing. 2. S.R. CR 1350:1993 Date published 21 SEPTEMBER 2011 Investigation of Syntaxes for Existing Interchange Formats to be Used in Healthcare 3. S.R. CR 1460:1994 Date published 21 SEPTEMBER 2011 Packaging – Energy Recovery from Used Packaging 4. S.R. CR 12161:1995 Date published 24 SEPTEMBER 2011 A method for defining profiles for healthcare 5. S.R. CR 12340:1996 Date published 21 SEPTEMBER 2011 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems 6. S.R. CR 1901:1995 Date published 21 SEPTEMBER 2011 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete 7. S.R. CR 12776:1997 Date published 21 SEPTEMBER 2011 Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials 8. S.R. CR 12793:1997 Date published 21 SEPTEMBER 2011 Measurement of the carbonation depth of hardened concrete 9. S.R. CR 12804:1997 Date published 21 SEPTEMBER 2011 Conceptual Model and Taxonomy for Information Systems Engineering 10. S.R. CR 12894:1997 Date published 21 SEPTEMBER 2011 Biotechnology - Microorganisms - Examination of the various existing lists of animal pathogens and production of a report 11. S.R. CR 13156:1998 Date published 21 SEPTEMBER 2011 Some occupational profiles for practitioners in logistics 12. S.R. CR 13259:1998 Date published 21 SEPTEMBER 2011 Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes

Date: 18/07/2018 Page 1 13. S.R. CR 13464:1999 Date published 21 SEPTEMBER 2011 Guide to selection, use and maintenance of occupational eye and face protectors 14. S.R. CR 13505:1999 Date published 21 SEPTEMBER 2011 Food analysis - Biotoxins - Criteria of analytical methods of mycotoxins 15. S.R. CR 1750:1999 Date published 21 SEPTEMBER 2011 Identification card systems - Inter-sector messages between devices and hosts - Acceptor to acquirer messages 16. S.R. CR 10299:1999 Date published 21 SEPTEMBER 2011 Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry 17. S.R. CR 13426:1998 Date published 24 SEPTEMBER 2011 Biotechnology - Microorganisms - Report on the criteria used to classify Group I genetically modified microorganisms 18. S.R. CR 12333:1996 Date published 21 SEPTEMBER 2011 Fertilizers – Crushing strength determination on fertilizers grains 19. S.R. CR ISO 13434:1999 Date published 21 SEPTEMBER 2011 Guidelines on durability of geotextiles and geotextile-related products 20. S.R. CWA 13449-1:1999 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 1: Application Programming Interface (API) - Service Provider Interface (SPI) - Programmer’s Reference 21. S.R. CWA 13449-2:1998 Date published 21 SEPTEMBER 2011 Extension for Financial Services (XFS) interface specification - Part 2: Service Classes Definition 22. S.R. CWA 13449-3:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 3: Printer Device Class Interface - Programmer’s Reference 23. S.R. CWA 13449-4:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 4: Identification Card Device Class Interface - Programmer’s Reference 24. S.R. CWA 13449-5:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 5: Cash Dispenser Device Class Interface - Programmer’s Reference 25. S.R. CWA 13449-6:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 6: PIN Keypad Device Class Interface - Programmer’s Reference

Date: 18/07/2018 Page 2 26. S.R. CWA 13449-7:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 7: Check Reader/Scanner Device Class Interface - Programmer’s Reference 27. S.R. CWA 13449-8:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 8: Depository Device Class Interface - Programmer’s Reference 28. S.R. CWA 13449-9:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 9: Text Terminal Unit Device Class Interface - Programmer’s Reference 29. S.R. CWA 13449-10:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 10: Sensors and Indicators Unit Device Class Interface - Programmer’s Reference 30. S.R. CWA 13449-11:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 11: Vendor Dependent Mode Device Class Interface - Programmer’s Reference 31. S.R. CWA 13449-12:1998 Date published 21 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Part 12: Camera Device Class Interface - Programmer’s Reference 32. S.R. CR 13455:1999 Date published 21 SEPTEMBER 2011 Soil improvers and growing media - Guidelines for the safety of users, the environment and plants 33. S.R. CR 13456:1999 Date published 21 SEPTEMBER 2011 Soil improvers and growing media - Labelling, specifications and product schedules 34. S.R. CR 13642:1999 Date published 22 SEPTEMBER 2011 Flanges and their joints - Design rules for gasketed circular flange connections - Background information 35. S.R. CR 13694:1999 Date published 22 SEPTEMBER 2011 Health Informatics - Safety and Security Related Software Quality Standards for Healthcare (SSQS) 36. S.R. CR 954-100:1999 Date published 22 SEPTEMBER 2011 Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996 37. S.R. CR 10313:2000 Date published 22 SEPTEMBER 2011 Classification of grades of steel - Examples of classification related to European standards

Date: 18/07/2018 Page 3 38. S.R. CWA 13849-1:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 1: Active XSF Common Object Interface Specification 39. S.R. CWA 13849-2:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 2: Active XSF Card Reader Object Interface Specification 40. S.R. CWA 13849-3:2000 Date published 22 SEPTEMBER 2011 ActiveXFS Interface Specification - Part 3: ActiveXSF Cash Dispenser Object Interface Specification 41. S.R. CWA 13849-4:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 4: Active XSF Depository Object Interface Specification 42. S.R. CWA 13849-5:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 5: Active XFS PINPad Object Interface Specification 43. S.R. CWA 13849-6:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 6: Active XSF Journal Printer Object Interface Specification 44. S.R. CWA 13849-7:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 7: Active XSF Receipt Printer Object Interface Specification 45. S.R. CWA 13849-8:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 8: Active XSF Document Printer Object Interface Specification 46. S.R. CWA 13849-9:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 9: Active XSF Passbook Printer Object Interface Specification 47. S.R. CWA 13849-10:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 10: Active XFS Sensors Doors and Indicators Object Interface Specification 48. S.R. CWA 13849-11:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 11: Active XFS Text Terminal Object Interface Specification 49. S.R. CWA 13849-12:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 12: Active XFS Night Safe Object Interface Specification

Date: 18/07/2018 Page 4 50. S.R. CWA 13849-13:2000 Date published 22 SEPTEMBER 2011 Active XFS Interface Specification - Part 13: Active XFS Printer Auxiliary Object Interface Specification 51. S.R. CR 13837:2000 Date published 22 SEPTEMBER 2011 Automotive diesel fuels - Determination fo filtrability - SFPP method 52. S.R. CR 13838:2000 Date published 22 SEPTEMBER 2011 Automotive diesel fuels - Determination of filtrability - AGELFI method 53. S.R. CR 13839:2000 Date published 22 SEPTEMBER 2011 Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method 54. S.R. CR 13840:2000 Date published 22 SEPTEMBER 2011 Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method 55. S.R. CR 13846:2000 Date published 22 SEPTEMBER 2011 Recommendations to preserve and extend sludge utilisation and disposal routes 56. S.R. CR 13504:2000 Date published 22 SEPTEMBER 2011 Packaging - Material recovery - Criteria for a minimum content of recycled material 57. S.R. CWA 13873:2000 Date published 22 SEPTEMBER 2011 Information Technology - Multilingual European Subsets in ISO/IEC 10646-1 58. S.R. CR 13875:2000 Date published 22 SEPTEMBER 2011 Identification card systems - Intersector thin flexible cards - Security features 59. S.R. CR 13962:2000 Date published 22 SEPTEMBER 2011 Guidelines for the application of LAC-components in structures 60. S.R. CR 13960:2000 Date published 22 SEPTEMBER 2011 Solid fertilizers - Study on homogeneity 61. I.S. ENV 13607:2000 Date published 22 SEPTEMBER 2011 Health informatics - Messages for the exchange of information on medicine prescriptions 62. I.S. ENV 13608-1:2000 Date published 22 SEPTEMBER 2011 Health informatics - Security for healthcare communication - Part 1: Concepts and terminology 63. I.S. ENV 13608-2:2000 Date published 22 SEPTEMBER 2011 Health informatics - Security for healthcare communication - Part 2: Secure data objects 64. I.S. ENV 13609-2:2000 Date published 24 SEPTEMBER 2011 Health informatics - Messages for maintenance of supporting information in healthcare systems - Part 2: Updating of medical laboratory-specific information Date: 18/07/2018 Page 5 65. S.R. CR 13902:2000 Date published 24 SEPTEMBER 2011 Test methods for determining the water/cement ratio of fresh concrete 66. S.R. CR 13908:2000 Date published 24 SEPTEMBER 2011 Logistics Performance Measures - Requirements and Measuring Methods 67. S.R. CR 13903:2000 Date published 24 SEPTEMBER 2011 General guidance on the equipment used for inhaled nitric oxide therapy 68. S.R. CR 13909:2000 Date published 24 SEPTEMBER 2011 Identification card systems - Intersector thin flexible cards - Acceptance criteria 69. S.R. CWA 14050-1:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 1: Application Programming Interface (API) - Service Provider Interface (SPI); Programmer’s Reference 70. S.R. CWA 14050-2:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 2: Service Classes Definition 71. S.R. CWA 14050-3:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 3: Printers Device Class Interface 72. S.R. CWA 14050-5:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 5: Cash Dispenser Device Class Interface 73. S.R. CWA 14050-7:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) Interface specification - Release 3.0 - Part 7: Check Reader/Scanner Device Class Interface 74. S.R. CWA 14050-8:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) Interface specification - Release 3.0 - Part 8: Depository Device Class Interface 75. S.R. CWA 14050-9:2000 Date published 24 SEPTEMBER 2011 Extension for Financial Services (XFS) interface specification - Release 3.0 - Part 9: Text Terminal Unit Device Class Interface 76. S.R. CWA 14050-11:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 11: Vendor Dependent Mode Class Interface 77. S.R. CWA 14050-12:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 12: Camera Device Class Interface

Date: 18/07/2018 Page 6 78. S.R. CWA 14050-13:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 13: Alarm Device Class Interface 79. S.R. CWA 14050-14:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 14: Card Embossing Unit Class Interface 80. S.R. CWA 14050-16:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 16: Application Programming Interface (API) - Service Provider Interface (SPI) - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer’s Reference 81. S.R. CWA 14050-17:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 17: Printer Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer’s Reference 82. S.R. CWA 14050-18:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 18: Identification Card Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer’s Reference 83. S.R. CWA 14050-19:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 19: Cash Dispenser Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer’s Reference 84. S.R. CWA 14050-20:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 20: Pin Keypad Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer’s Reference 85. S.R. CWA 14050-21:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 21: Depository Device Class Interface - Migration from Version 2.0 (see CWA 13499) to Version 3.0 (this CWA) - Programmer’s Reference 86. S.R. CWA 14050-22:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 22: Text Terminal Unit Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer’s Reference 87. S.R. CWA 14050-24:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 24: Camera Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer’s Reference

Date: 18/07/2018 Page 7 88. S.R. CWA 14050-25:2000 Date published 24 SEPTEMBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 25: Identification Card Device Class Interface - PC/SC Integration Guidelines 89. S.R. CWA 14094:2001 Date published 24 SEPTEMBER 2011 European Culturally Specific ICT Requirements 90. S.R. CR 14245:2001 Date published 24 SEPTEMBER 2011 Guidelines for the application of EN 197-2 “Conformity Evaluation” 91. S.R. CR 13686:2001 Date published 24 SEPTEMBER 2011 Packaging - Optimisation of energy recovery from packaging waste 92. S.R. CWA 14167-4:2004 Date published 24 SEPTEMBER 2011 Cryptographic module for CSP signing operations - Protection profile - CMCSO PP 93. S.R. CWA 14923-7:2004 Date published 24 SEPTEMBER 2011 J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 7: Alarm Device Interface - Programmer's Reference 94. I.S. EN ISO 15502:2005/AC:2007 Date published 16 MAY 2011 Household refrigerating appliances - Characteristics and test methods (ISO 15502:2005/Cor 1:2007) 95. I.S. EN 10216-2:2002/A1:2007 Date published 3 JANUARY 2011 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties 96. S.R. CR 13928:2000 Date published 14 MAY 2011 Information Technology - Guide to the use of character set standards in Europe 97. I.S. EN 3270:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' in titanium alloy - Blanking plugs with lockring 98. I.S. EN 3566:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' in titanium alloy - Adaptors with lockring 99. I.S. EN 3663:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, Temperature range: - 55 oC to 135 oC 100. I.S. EN 3688:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure 101. I.S. EN 3689:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure

Date: 18/07/2018 Page 8 102. I.S. EN 3690:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' in titanium alloy - Unions, bulkhead, long 103. I.S. EN 3691:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' in titanium alloy - Unions, bulkhead, long welded end 104. I.S. EN 3083:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' in titanium alloy - Unions, bulkhead, long welded end, for repair 105. I.S. EN 3082:2001/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8≈30' in titanium alloy - Unions, bulkhead welded end, for repair 106. I.S. EN 3084:2001/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' in titanium alloy - Unions, welded end threaded for repair 107. I.S. EN 3788:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' - Protective caps 108. I.S. EN 3789:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' - Protective plugs with external threads 109. I.S. EN 3790:2002/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe coupling 8o30' - Protective caps with internal threads 110. I.S. EN 4032:2001/AC:2003 Date published 5 SEPTEMBER 2011 Aerospace series - Pipe couplings 8o30' in titanium alloy - Thrust wire 111. S.R. CR 12695:1997 Date published 14 MAY 2011 Metal chimneys - Corrosion resistance requirements and test methods 112. I.S. EN 13481-4:2002/AC:2004 Date published 14 MAY 2011 Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers 113. I.S. ENV 13481-6:2002/AC:2004 Date published 14 MAY 2011 Railway applications - Track - Performance requirements for fastening systems - Part 6: Special fastening systems for attenuation of vibration 114. I.S. EN ISO 13590:2004/AC:2004 Date published 14 MAY 2011 Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003) 115. I.S. EN ISO 10723:2002/AC:2004 Date published 14 MAY 2011 Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995, including Technical Corrigendum 1:1998)

Date: 18/07/2018 Page 9 116. I.S. EN ISO 11670:2003/AC:2004 Date published 14 MAY 2011 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003/Cor.1:2004) 117. I.S. EN ISO 15797:2004/AC:2004 Date published 14 MAY 2011 Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002/Cor.1:2004) 118. I.S. EN ISO 15304:2002/AC:2004 Date published 14 MAY 2011 Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002/Cor.1:2003) 119. I.S. EN ISO 15197:2003/AC:2005 Date published 14 MAY 2011 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003) 120. I.S. EN ISO 11979-2:2000/AC:2005 Date published 14 MAY 2011 Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999) 121. I.S. EN ISO 21572:2004/AC:2005 Date published 14 MAY 2011 Foodstuffs - Methods for the detection of genetically modified organisms and derived products - Protein based methods (ISO 21572:2004) 122. I.S. EN 10025-2:2004/AC:2005 Date published 14 MAY 2011 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non- alloy structural steels 123. I.S. EN ISO 14945:2004/AC:2005 Date published 14 MAY 2011 Small craft - Builder's plate (ISO 14945:2004) 124. I.S. EN ISO 14946:2002/AC:2005 Date published 14 MAY 2011 Small craft - Maximum load capacity (ISO 14946:2001) 125. I.S. EN ISO 8847:2004/AC:2005 Date published 14 MAY 2011 Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004) 126. I.S. EN 12209:2004/AC:2005 Date published 14 MAY 2011 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods 127. I.S. EN 622-2:2004/AC:2005 Date published 14 MAY 2011 Fibreboards - Specifications - Part 2: Requirements for hardboards 128. I.S. EN 14449:2005/AC:2005 Date published 14 MAY 2011 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard

Date: 18/07/2018 Page 10 129. I.S. EN ISO 20344:2005/AC:2005 Date published 14 MAY 2011 Personal protective equipment - Test methods for footwear (ISO 20344:2004) 130. I.S. EN 14122:2003/AC:2005 Date published 14 MAY 2011 Foodstuffs - Determination of vitamin B1 by HPLC 131. I.S. EN 14152:2003/AC:2005 Date published 14 MAY 2011 Foodstuffs - Determination of vitamin B2 by HPLC 132. I.S. EN ISO 9905:1998/AC:2006 Date published 14 MAY 2011 Technical specifications for centrifugal pumps - Class 1 (ISO 9905:1994) 133. I.S. EN 1154:1996/A1:2002/AC:2006 Date published 14 MAY 2011 Buiding hardware - Controlled door closing devices - Requirements and test methods 134. I.S. EN 1155:1998/A1:2002/AC:2006 Date published 14 MAY 2011 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods 135. I.S. EN 1158:1997/A1:2002/AC:2006 Date published 14 MAY 2011 Building hardware - Door coordinator devices - Requirements and test methods 136. S.R. CWA 15515:2006 Date published 14 MAY 2011 European ICT Skills Meta-Framework - State-of-the-Art review, clarification of the realities, and recommendations for next steps

137. I.S. EN ISO 13533:2001/AC:2006 Date published 14 MAY 2011 Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001) 138. I.S. EN ISO 14692-2:2002/AC:2006 Date published 14 MAY 2011 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002) 139. I.S. EN ISO 14692-3:2003/AC:2006 Date published 5 SEPTEMBER 2011 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002) 140. I.S. EN 374-3:2003/AC:2006 Date published 5 SEPTEMBER 2011 Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals 141. I.S. EN ISO 10139-1:2005/AC:2006 Date published 5 SEPTEMBER 2011 Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2005)

Date: 18/07/2018 Page 11 142. I.S. EN ISO 10042:2006/AC:2006 Date published 5 SEPTEMBER 2011 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005) 143. I.S. EN ISO 15496:2004/AC:2006 Date published 5 SEPTEMBER 2011 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2004) 144. I.S. EN ISO 10271:2001/AC:2006 Date published 22 MAY 2011 Dental metallic materials - Corrosion test methods (ISO 10271:2001) 145. I.S. EN 13363-2:2005/AC:2006 Date published 5 SEPTEMBER 2011 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method 146. I.S. EN ISO 2811-1:2001/AC:2006 Date published 22 MAY 2011 Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811 -1:1997) 147. I.S. EN ISO 14698-2:2003/AC:2006 Date published 5 SEPTEMBER 2011 Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003) 148. I.S. EN ISO 13937-1:2000/AC:2006 Date published 4 AUGUST 2011 Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000) 149. I.S. EN ISO 12947-2:1999/AC:2006 Date published 4 AUGUST 2011 Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998) 150. I.S. EN ISO 75-2:2004/AC:2006 Date published 4 AUGUST 2011 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2004) 151. I.S. EN ISO 6579:2002/AC:2006 Date published 4 AUGUST 2011 Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp (ISO 6579:2002) 152. I.S. EN ISO 19957:2004/AC:2006 Date published 4 AUGUST 2011 Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2004) 153. I.S. EN 14422:2005/AC:2006 Date published 4 AUGUST 2011 Clamp type coupling assemblies for LPG transfer hoses 154. I.S. EN 14423:2005/AC:2006 Date published 4 AUGUST 2011 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar

Date: 18/07/2018 Page 12 155. I.S. EN ISO 11402:2005/AC:2006 Date published 4 AUGUST 2011 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004) 156. I.S. EN ISO 3543:2001/AC:2006 Date published 4 AUGUST 2011 Metallic and Non-Metallic Coatings – Measurement of Thickness – Beta Backscatter Method (ISO 3543:1981) 157. I.S. EN ISO 6320:2000/AC:2006 Date published 5 AUGUST 2011 Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000) 158. I.S. EN ISO 12947-3:1999/AC:2006 Date published 4 AUGUST 2011 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998) 159. I.S. EN ISO 12947-4:1998/AC:2006 Date published 4 AUGUST 2011 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998) 160. I.S. EN 13458-2:2002/AC:2006 Date published 5 AUGUST 2011 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing 161. I.S. EN 13530-2:2002/AC:2006 Date published 5 AUGUST 2011 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing 162. I.S. EN 14197-2:2003/AC:2006 Date published 5 AUGUST 2011 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing 163. I.S. EN ISO 75-3:2004/AC:2006 Date published 4 AUGUST 2011 Plastics - Determination of temperature of deflection under load – Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004) 164. I.S. EN 13924:2006/AC:2006 Date published 5 AUGUST 2011 Bitumen and bituminous binders - Specifications for hard paving grade bitumens 165. I.S. EN 14041:2004/AC:2006 Date published 14 MAY 2011 Resilient, textile and laminate floor coverings - Essential characteristics 166. I.S. EN 14902:2005/AC:2006 Date published 5 AUGUST 2011 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter 167. I.S. EN ISO 12402-5:2006/AC:2006 Date published 5 AUGUST 2011 Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO 12402-5:2006)

Date: 18/07/2018 Page 13 168. I.S. EN 54-18:2006/AC:2007 Date published 5 SEPTEMBER 2011 Fire detection and fire alarm systems - Part 18: Input/output devices 169. I.S. EN 1318:2006/AC:2007 Date published 5 AUGUST 2011 Textile floor coverings - Determination of the apparent effective thickness of the backing 170. I.S. EN 12101-10:2005/AC:2007 Date published 5 AUGUST 2011 Smoke and heat control systems - Part 10: Power supplies 171. I.S. EN ISO 105-E06:2006/AC:2007 Date published 5 AUGUST 2011 Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO 105-E06:2006) 172. I.S. EN 15016-2:2004/AC:2007 Date published 5 AUGUST 2011 Technical drawings - Railway applications - Part 2: Parts lists 173. I.S. EN 14893:2006/AC:2007 Date published 5 AUGUST 2011 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres 174. I.S. EN 10163-1:2004/AC:2007 Date published 13 AUGUST 2011 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements 175. I.S. EN 12766-3:2004/AC:2007 Date published 5 AUGUST 2011 Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD) 176. I.S. EN 13852-1:2004/AC:2007 Date published 13 AUGUST 2011 Cranes - Offshore cranes - Part 1: General - purpose offshore cranes 177. I.S. EN 13201-3:2003/AC:2007 Date published 13 AUGUST 2011 Road lighting - Part 3: Calculation of performance 178. I.S. EN 13032-2:2004/AC:2007 Date published 13 AUGUST 2011 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places 179. I.S. EN 1662:1998/AC:2007 Date published 13 AUGUST 2011 Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) 180. I.S. EN 14219:2003/AC:2007 Date published 13 AUGUST 2011 Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) 181. I.S. EN 14836:2006/AC:2007 Date published 13 AUGUST 2011 Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering

Date: 18/07/2018 Page 14 182. I.S. EN 12697-10:2002/AC:2007 Date published 13 AUGUST 2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability 183. I.S. EN 12697-11:2005/AC:2007 Date published 13 AUGUST 2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen 184. I.S. EN 12697-21:2003/AC:2007 Date published 13 AUGUST 2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens 185. I.S. EN ISO 23631:2006/AC:2007 Date published 13 AUGUST 2011 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquidliquid extraction and derivatization (ISO 23631:2006) 186. I.S. EN 10210-2:2006/AC:2007 Date published 13 AUGUST 2011 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties 187. I.S. EN 10296-2:2005/AC:2007 Date published 5 AUGUST 2011 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel 188. I.S. EN 10297-2:2006/AC:2007 Date published 13 AUGUST 2011 Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel 189. S.R. CEN TS 635-4:2007 Date published 21 MAY 2011 Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline 190. S.R. CEN TS 1099:2007 Date published 21 MAY 2011 Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes 191. S.R. CEN TS 12872:2007 Date published 21 MAY 2011 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs 192. S.R. CEN TR 15640:2007 Date published 21 MAY 2011 Health informatics - Measures for ensuring the patient safety of health software 193. I.S. EN 1151-1:2006/AC:2007 Date published 13 AUGUST 2011 Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1: Non-automatic circulation pumps, requirements, testing, marking

Date: 18/07/2018 Page 15 194. I.S. EN 15330-1:2007/AC:2007 Date published 13 AUGUST 2011 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf 195. I.S. EN 14809:2006/AC:2007 Date published 13 AUGUST 2011 Surfaces for sports areas - Determination of vertical deformation 196. I.S. EN 13369:2004/AC:2007 Date published 5 AUGUST 2011 Common rules for precast concrete products 197. S.R. CEN ISO TR 24094:2007 Date published 21 MAY 2011 Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006) 198. I.S. EN ISO 4287:1998/AC:2008 Date published 13 AUGUST 2011 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997) 199. I.S. EN ISO 11562:1998/AC:2008 Date published 13 AUGUST 2011 Geometrical product specifications (GPS) - Surface texture : Profile method - Metrological characteristics of phase correct filters (ISO 11562 : 1996) 200. I.S. EN ISO 12085:1998/AC:2008 Date published 14 AUGUST 2011 Geometrical product specification (GPS) - Surface texture : Profile method - Motif parameters (ISO 12085 : 1996) 201. I.S. EN 14267:2004/AC:2008 Date published 14 AUGUST 2011 Irrigation techniques - Irrigation hydrants 202. I.S. EN 13297:2007/AC:2008 Date published 13 AUGUST 2011 Textile floor coverings - Classification of needled pile floor coverings 203. I.S. EN 15587:2008/AC:2009 Date published 14 AUGUST 2011 Cereals and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) 204. I.S. EN ISO 15212-1:1999/AC:2009 Date published 14 AUGUST 2011 Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998) 205. I.S. EN ISO 15212-2:2002/AC:2009 Date published 14 AUGUST 2011 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002) 206. I.S. EN ISO 8655-1:2002/AC:2009 Date published 14 AUGUST 2011 Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002)

Date: 18/07/2018 Page 16 207. I.S. EN ISO 8655-3:2002/AC:2009 Date published 14 AUGUST 2011 Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002) 208. I.S. EN ISO 8655-4:2002/AC:2009 Date published 14 AUGUST 2011 Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002) 209. I.S. EN ISO 8655-5:2002/AC:2009 Date published 14 AUGUST 2011 Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002) 210. I.S. EN ISO 8655-7:2005/AC:2009 Date published 14 AUGUST 2011 Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance (ISO 8655-7:2005) 211. I.S. EN 659:2003+A1:2008/AC:2009 Date published 14 AUGUST 2011 Protective gloves for firefighters 212. I.S. EN ISO 5436-2:2001/AC:2008 Date published 13 AUGUST 2011 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001) 213. I.S. EN 10028-1:2007+A1:2009/AC:2009 Date published 14 AUGUST 2011 Flat products made of steels for pressure purposes - Part 1: General requirements 214. I.S. EN ISO 28199-1:2009/AC:2009 Date published 14 AUGUST 2011 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) 215. I.S. EN 15085-3:2007/AC:2009 Date published 14 AUGUST 2011 Railway applications - Welding of railway vehicles and components - Part 3: Design requirements 216. I.S. EN 761:1994/AC:1995 Date published 5 SEPTEMBER 2011 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions 217. I.S. EN 637:1994/AC:1995 Date published 5 SEPTEMBER 2011 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method 218. I.S. EN 2311:1987 Date published 21 MAY 2011 Aerospace series - Bushes with self-lubricating liner - Technical specification 219. I.S. EN 226:1987 Date published 21 MAY 2011 Atomizing oil burners - Connecting dimensions between burners and heat generators 220. CR 262:1991 Date published 20 DECEMBER 2011 Volatility of petrol

Date: 18/07/2018 Page 17 221. I.S. EN ISO 10545-7:1999/AC:1999 Date published 12 JULY 2011 Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996) 222. I.S. EN 2011:1984 Date published 21 MAY 2011 Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 8 and 9 - Dimensions and loads - Aerospace series 223. I.S. EN 1252-1:1998/AC:1998 Date published 12 JULY 2011 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80oC 224. I.S. EN 2547:1987 Date published 21 MAY 2011 Aerospace series - Filming of documents - Microfilm 105 mm (microfiche A6) 225. S.R. CR 296:1989 Date published 24 SEPTEMBER 2011 Feasibility study of a standardization programme in the area of health and safety at the workplace 226. S.R. CR 1832:1995 Date published 24 SEPTEMBER 2011 CIM Systems Architecture - Enterprise model execution and integration services - Statement of requirements 227. S.R. CWA 14923-1:2004 Date published 21 MAY 2011 J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 1: Base Architecture - Programmer's Reference 228. S.R. CEN TR 15641:2007 Date published 21 MAY 2011 Food analysis - Determination of pesticide residues by LC-MS/MS - Tandem mass spectrometric parameters 229. I.S. EN 10242:1995/A1:1999/AC:1999 Date published 30 SEPTEMBER 2011 Threaded pipe fitting in malleable cast iron 230. I.S. ENV 1250-2:1994 Date published 21 MAY 2011 Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 2: Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water 231. I.S. ENV 1250-1:1994 Date published 21 MAY 2011 Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 1: Laboratory method for obtaining samples for analysis to measure losses by evaporation to air 232. I.S. EN 252:1990/AC1:1989 Date published 5 SEPTEMBER 2011 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact

Date: 18/07/2018 Page 18 233. S.R. CR 1030-2:1995 Date published 24 SEPTEMBER 2011 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace 234. S.R. CR 12587:1996 Date published 24 SEPTEMBER 2011 Medical Informatics - Methodology for the development of healthcare messages 235. I.S. EN 12516-3:2002/AC:2003 Date published 12 JULY 2011 Valves - Shell design strength - Part 3: Experimental method 236. I.S. EN 2870:1997/AC:1996 Date published 30 SEPTEMBER 2011 Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short

thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 oC 237. I.S. EN ISO 12058-1:2002/AC:2004 Date published 12 JULY 2011 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997) 238. I.S. EN 14591-1:2004/AC:2006 Date published 12 JULY 2011 Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure 239. I.S. EN 24185:1994/AC:1994 Date published 12 JULY 2011 Measurement of liquid flow in closed conduits - Weighing method (ISO 4185:1980) 240. S.R. CR 1030-1:1995 Date published 24 SEPTEMBER 2011 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery 241. I.S. EN 130:1984 Date published 21 MAY 2011 Methods of testing doors - Test for the change in stiffness of the door leaves by repeated torsion 242. I.S. EN ISO 9692-2:1998/AC:1999 Date published 6 SEPTEMBER 2011 Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) 243. I.S. EN 31427:1994/AC:1994 Date published 6 SEPTEMBER 2011 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993) 244. I.S. EN 24829-1:1991/AC:1991 Date published 30 SEPTEMBER 2011 Steel and cast iron - Determination of total silicon content - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon content between 0,05 and 1% (ISO 4829 -1:1986)

Date: 18/07/2018 Page 19 245. I.S. EN 24938:1991/AC:1991 Date published 30 SEPTEMBER 2011 Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:1988) 246. I.S. EN 1801:1999/AC:1999 Date published 12 JULY 2011 Transportable gas cylinders - Filling conditions for single acetylene cylinders 247. I.S. EN 2068:1996/AC:1996 Date published 30 SEPTEMBER 2011 Aerospace series - Rod ends with self-lubricating self-aligning bearings - Technical specification 248. I.S. EN 2499:1987 Date published 21 MAY 2011 Aerospace series - Computer output microfiche (COM) - A6 microfiche 249. I.S. CEN ISO TS 17261:2005/AC:2006 Date published 12 JULY 2011 Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal good transport architecture and terminology (ISO/TS 17261:2005) 250. I.S. EN 13160-5:2004/AC:2007 Date published 30 SEPTEMBER 2011 Leak detection systems - Part 5: Tank gauge leak detection systems 251. I.S. EN ISO 11758:1998/AC:1998 Date published 12 JULY 2011 Rubber and plastic hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995) 252. S.R. CR 1831:1995 Date published 24 SEPTEMBER 2011 CIM Systems Architecture - Enterprise model execution and integration services - Evaluation report 253. I.S. EN 2018:1984 Date published 21 MAY 2011 Bearings, airframe rolling, single row, self aligning roller bearings in steel, diameter series 3 and 4 - Dimensions and loads - Aerospace series 254. I.S. EN ISO 4823:2001/AC:2006 Date published 12 JULY 2011 Dentistry - Elastomeric impression materials (ISO 4823:2000) 255. I.S. EN 2955:1994/AC:1995 Date published 30 SEPTEMBER 2011 Aerospace series - Recycling of titanium and titanium alloy scrap 256. I.S. EN 2544:1987 Date published 21 MAY 2011 Aerospace series - Representation of rivets on drawings for aerospace equipment 257. I.S. EN ISO 4623-2:2004/AC:2006 Date published 12 JULY 2011 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2003) 258. I.S. EN 10222-5:2000/AC:2000 Date published 6 SEPTEMBER 2011 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic- ferritic stainless steels

Date: 18/07/2018 Page 20 259. I.S. EN 24829-2:1990/AC:1991 Date published 30 SEPTEMBER 2011 Steel and cast iron - Determination of total silicon content - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon content between 0,01 and 0,05% (ISO 4829 -2:1988) 260. I.S. EN 24943:1991/AC:1991 Date published 30 SEPTEMBER 2011 Steel and cast iron - Determination of copper content - Flame atomic absorption spectrometric method (ISO 4943:1985) 261. S.R. CR 245:1986 Date published 24 SEPTEMBER 2011 Thermal insulation - Classification of building materials according to their thermal insulation properties 262. I.S. EN 107:1980 Date published 21 MAY 2011 Methods of testing windows - Mechanical test 263. I.S. EN 129:1984 Date published 21 MAY 2011 Methods of testing doors - Test for deformation in torsion of the door leaves 264. I.S. EN ISO 8442-1:1998/AC:1999 Date published 6 SEPTEMBER 2011 Materials and articles in contact with foodstuffs - Cutlery and table hollowware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997) 265. S.R. CR 1830:1995 Date published 24 SEPTEMBER 2011 CIM Systems Architecture - Vocabulary 266. S.R. CR 1955:1995 Date published 24 SEPTEMBER 2011 Proposals for the braking of electrical vehicles 267. I.S. EN 2014:1984 Date published 21 MAY 2011 Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 0 and 2 - Dimensions and loads - Aerospace series 268. I.S. EN 2017:1984 Date published 21 MAY 2011 Bearings, airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2 - Dimensions and loads - Aerospace series 269. I.S. EN 2020:1984 Date published 21 MAY 2011 Bearings, airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4 - Dimensions and loads - Aerospace series 270. I.S. EN 24937:1991/AC:1991 Date published 30 SEPTEMBER 2011 Steel and iron - Determination of chromium content - Potentiometric or visual method (ISO 4937:1986) 271. I.S. EN 14268:2005/AC:2007 Date published 12 JULY 2011 Irrigation techniques - Meters for irrigation water

Date: 18/07/2018 Page 21 272. I.S. EN 24946:1991/AC:1991 Date published 30 SEPTEMBER 2011 Steel and cast iron - Determination of copper content - 2,2'diquinolyl spectrophotometric method (ISO 4946:1984) 273. S.R. CR 213:1984 Date published 24 SEPTEMBER 2011 Particle boards - Determination of formaldehyde emission under specified conditions - Method called: formaldehyde emission method 274. I.S. EN 45501:1993/AC:1993 Date published 12 JULY 2011 Metrological aspects of non-automatic weighing instruments 275. I.S. EN 2012:1984 Date published 21 MAY 2011 Bearings, airframe rolling, rigid, single row ball bearings in steel, diameter series 0 and 2 - Dimensions and loads - Aerospace series 276. I.S. EN 1865-1:2010/LC:2010 Date published 21 MAY 2011 Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment 277. I.S. EN 60061-3:1995/A41:2010 Date published 4 JANUARY 2011 Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges (IEC 60061-3:1969/A41:2010 (EQV)) 278. I.S. EN 60061-2:1995/A41:2010 Date published 4 JANUARY 2011 Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders (IEC 60061-2:1969/A41:2010 (EQV)) 279. I.S. EN 50304:2009/A1:2010 Date published 4 APRIL 2011 Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance 280. I.S. EN 60061-1:1995/A43:2010 Date published 4 JANUARY 2011 Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps (IEC 60061-1:1969/A43:2010 (EQV)) 281. I.S. EN 60061-2:1995/A40:2010 Date published 4 JANUARY 2011 Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders (IEC 60061-2:1969/A40:2010 (EQV)) 282. I.S. EN 60061-1:1995/A44:2010 Date published 4 JANUARY 2011 Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps (IEC 60061-1:1969/A44:2010 (EQV)) 283. I.S. EN 60061-3:1995/A42:2010 Date published 4 JANUARY 2011 Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges (IEC 60061-3:1969/A42:2010 (EQV))

Date: 18/07/2018 Page 22 284. I.S. EN 15916-2:2010 Date published 21 MAY 2011 Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) 285. I.S. EN 15947-1:2010 Date published 21 MAY 2011 Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 1: Terminology 286. I.S. EN 1996-1-2:2005+NA+AC:2010 Date published 7 JANUARY 2011 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design 287. I.S. EN 13480-2:2002/A2:2010 Date published 4 JANUARY 2011 Metallic industrial piping - Part 2: Materials 288. I.S. EN 13480-2:2002/A1:2010 Date published 4 JANUARY 2011 Metallic industrial piping - Part 2: Materials 289. I.S. EN 1992-1-1:2004/AC:2010-2014-07 Date published 7 JANUARY 2011 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings 290. I.S. EN 55024:2010 Date published 11 JANUARY 2011 Information technology equipment - Immunity characteristics - Limits and methods of measurement (CISPR 24:2010 (EQV)) 291. I.S. EN 60335-2-9:2003/A13:2010 Date published 11 JANUARY 2011 Household and similar electrical appliances - Safety -- Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances 292. I.S. EN 61788-8:2010 Date published 11 JANUARY 2011 Superconductivity -- Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method (IEC 61788-8:2010 (EQV)) 293. I.S. EN 50173-5:2007/A1:2010 Date published 17 JANUARY 2011 Information technology - Generic cabling systems -- Part 5: Data centres 294. I.S. EN 60745-2-13:2009/A1:2010 Date published 17 JANUARY 2011 Hand-held motor-operated electric tools - Safety -- Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006/A1:2009 (EQV)) 295. I.S. EN 62475:2010 Date published 17 JANUARY 2011 High-current test techniques - Definitions and requirements for test currents and measuring systems (IEC 62475:2010 (EQV)) 296. I.S. EN 61300-2-9:2010 Date published 17 JANUARY 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-9: Tests - Shock (IEC 61300-2-9:2010 (EQV))

Date: 18/07/2018 Page 23 297. I.S. EN 60745-2-21:2009/A1:2010 Date published 17 JANUARY 2011 Hand-held motor-operated electric tools - Safety -- Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002/A1:2008 (EQV)) 298. I.S. EN 60349-2:2010 Date published 17 JANUARY 2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors (IEC 60349-2:2010 (EQV)) 299. I.S. EN 60368-3:2010 Date published 17 JANUARY 2011 Piezoelectric filters of assessed quality -- Part 3: Standard outlines and lead connections (IEC 60368-3:2010 (EQV)) 300. I.S. EN 55022:2010 Date published 9 MARCH 2011 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 22:2008 (MOD)) 301. I.S. EN 55022:2006/A2:2010 Date published 9 MARCH 2011 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 22:2005/A2:2006 (MOD)) 302. I.S. EN 50173-2:2007/A1:2010 Date published 14 JANUARY 2011 Information technology - Generic cabling systems -- Part 2: Office premises 303. I.S. EN 50173-4:2007/A1:2010 Date published 14 JANUARY 2011 Information technology - Generic cabling systems -- Part 4: Homes 304. I.S. EN 60770-2:2010 Date published 14 JANUARY 2011 Transmitters for use in industrial-process control systems -- Part 2: Methods for inspection and routine testing (IEC 60770-2:2010 (EQV)) 305. I.S. EN 60060-1:2010 Date published 14 JANUARY 2011 High-voltage test techniques -- Part 1: General definitions and test requirements (IEC 60060-1:2010 (EQV)) 306. I.S. EN 60079-13:2010 Date published 14 JANUARY 2011 Explosive atmospheres -- Part 13: Equipment protection by pressurized room p (IEC 60079-13:2010 (EQV)) 307. I.S. EN 60534-7:2010 Date published 14 JANUARY 2011 Industrial-process control valves -- Part 7: Control valve data sheet (IEC 60534-7:2010 (EQV)) 308. I.S. EN 60695-2-12:2010 Date published 14 JANUARY 2011 Fire hazard testing -- Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials (IEC 60695-2-12:2010 (EQV)) 309. I.S. EN 60695-2-13:2010 Date published 14 JANUARY 2011 Fire hazard testing -- Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials (IEC 60695-2-13:2010 (EQV))

Date: 18/07/2018 Page 24 310. I.S. EN 62041:2010 Date published 12 JANUARY 2011 Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements (IEC 62041:2010 (EQV)) 311. I.S. EN 60749-15:2010 Date published 14 JANUARY 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 15: Resistance to soldering temperature for through-hole mounted devices (IEC 60749-15:2010 (EQV)) 312. I.S. EN 50173-3:2007/A1:2010 Date published 14 JANUARY 2011 Information technology - Generic cabling systems -- Part 3: Industrial premises 313. I.S. EN 60749-34:2010 Date published 14 JANUARY 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 34: Power cycling (IEC 60749-34:2010 (EQV)) 314. I.S. EN 60034-18-32:2010 Date published 14 JANUARY 2011 Rotating electrical machines -- Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance (IEC 60034-18-32:2010 (EQV)) 315. I.S. EN 60122-3:2010 Date published 14 JANUARY 2011 Quartz crystal units of assessed quality -- Part 3: Standard outlines and lead connections (IEC 60122-3:2010 (EQV)) 316. I.S. EN 61169-14:2010 Date published 14 JANUARY 2011 Radio-frequency connectors -- Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12) (IEC 61169-14:2010 (EQV)) 317. I.S. EN 61803:1999/A1:2010 Date published 14 JANUARY 2011 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:1999/A1:2010 (EQV)) 318. I.S. EN 61386-21:2004/A11:2010 Date published 14 JANUARY 2011 Conduit systems for cable management -- Part 21: Particular requirements - Rigid conduit systems 319. I.S. EN 61386-22:2004/A11:2010 Date published 14 JANUARY 2011 Conduit systems for cable management -- Part 22: Particular requirements - Pliable conduit systems 320. I.S. EN 61386-23:2004/A11:2010 Date published 14 JANUARY 2011 Conduit systems for cable management -- Part 23: Particular requirements - Flexible conduit systems 321. I.S. EN 62684:2010 Date published 19 MARCH 2011 Interoperability specifications of common external power supply (EPS) for use with data- enabled mobile telephones (IEC 62684:2010 (EQV))

Date: 18/07/2018 Page 25 322. I.S. EN 50423-3:2005/AC:2010-10 Date published 20 JANUARY 2011 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV -- Part 3: Set of National Normative Aspects 323. I.S. EN 60143-4:2010 Date published 12 JANUARY 2011 Series capacitors for power systems -- Part 4: Thyristor controlled series capacitors (IEC 60143-4:2010 (EQV)) 324. I.S. EN 13634:2010 Date published 7 JANUARY 2011 Protective footwear for motorcycle riders - Requirements and test methods 325. I.S. EN 741:2000+A1:2010 Date published 7 JANUARY 2011 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials 326. I.S. EN ISO 11666:2010 Date published 7 JANUARY 2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010) 327. S.R. CWA 16221:2010/LC:2011 Date published 7 JANUARY 2011 Vehicle security barriers - Performance requirements, test methods and guidance on application 328. I.S. EN ISO 3613:2010 Date published 7 JANUARY 2011 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) 329. I.S. EN ISO 178:2010 Date published 7 JANUARY 2011 Plastics - Determination of flexural properties (ISO 178:2010) 330. I.S. EN ISO 4404-2:2010 Date published 7 JANUARY 2011 Petroleum and related products - Determination of the corrosion resistance of fire- resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) 331. I.S. EN ISO 11114-3:2010 Date published 7 JANUARY 2011 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114 -3:2010) 332. I.S. EN ISO 80369-1:2010 Date published 7 JANUARY 2011 Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010) 333. I.S. EN ISO 16484-5:2010 Date published 7 JANUARY 2011 Building automation and control systems - Part 5: Data communication protocol (ISO 16484-5:2010)

Date: 18/07/2018 Page 26 334. I.S. EN ISO 10801:2010 Date published 7 JANUARY 2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010) 335. I.S. EN ISO 19142:2010 Date published 7 JANUARY 2011 Geographic information - Web Feature Service (ISO 19142:2010) 336. I.S. EN ISO 18274:2010 Date published 10 JANUARY 2011 Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification (ISO/FDIS 18274:2010) 337. S.R. CWA 16234-2:2010 Date published 7 JANUARY 2011 European e-Competence Framework 2.0 - Part 2: User guidelines for the application of the European e-Competence Framework 2.0 338. I.S. EN ISO 19906:2010 Date published 7 JANUARY 2011 Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010) 339. I.S. EN ISO 12625-8:2010 Date published 10 JANUARY 2011 Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) 340. I.S. EN ISO 24502:2010 Date published 7 JANUARY 2011 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010) 341. I.S. EN ISO 28460:2010 Date published 7 JANUARY 2011 Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010) 342. I.S. EN ISO 27020:2010 Date published 7 JANUARY 2011 Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2010) 343. I.S. EN 81-41:2010 Date published 7 JANUARY 2011 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility 344. I.S. EN ISO 11771:2010 Date published 7 JANUARY 2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) 345. I.S. EN ISO 4611:2010 Date published 7 JANUARY 2011 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010) 346. I.S. EN ISO 4534:2010 Date published 7 JANUARY 2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

Date: 18/07/2018 Page 27 347. I.S. EN 378-1:2008+A1:2010 Date published 7 JANUARY 2011 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria 348. I.S. EN ISO 13628-4:2010 Date published 7 JANUARY 2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:2010) 349. I.S. EN ISO 12737:2010 Date published 7 JANUARY 2011 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) 350. I.S. EN 14359:2006+A1:2010 Date published 7 JANUARY 2011 Gas-loaded accumulators for fluid power applications 351. I.S. EN ISO 10352:2010 Date published 7 JANUARY 2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010) 352. I.S. EN ISO 17640:2010 Date published 7 JANUARY 2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010) 353. I.S. EN ISO 16591:2010 Date published 7 JANUARY 2011 Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) 354. I.S. EN ISO 12690:2010 Date published 7 JANUARY 2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) 355. S.R. CEN TR 16110:2010 Date published 7 JANUARY 2011 Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste 356. I.S. EN ISO 11337:2010 Date published 7 JANUARY 2011 Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2010) 357. I.S. EN ISO 32100:2010 Date published 7 JANUARY 2011 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010) 358. I.S. EN ISO 28927-4:2010 Date published 7 JANUARY 2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) 359. I.S. EN 15275:2007/AC:2010-12 Date published 7 JANUARY 2011 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

Date: 18/07/2018 Page 28 360. I.S. EN ISO 14921:2010 Date published 7 JANUARY 2011 Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) 361. I.S. EN ISO 4254-11:2010 Date published 7 JANUARY 2011 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) 362. I.S. EN ISO 14406:2010 Date published 7 JANUARY 2011 Geometrical product specifications (GPS) - Extraction (ISO 14406:2010) 363. I.S. EN ISO 24501:2010 Date published 7 JANUARY 2011 Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010) 364. S.R. CEN TR 852:2010 Date published 7 JANUARY 2011 Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values 365. I.S. EN ISO 14405-1:2010 Date published 7 JANUARY 2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010) 366. S.R. CWA 16234-3:2010 Date published 7 JANUARY 2011 European e-Competence Framework 2.0 - Part 3: Building the e-CF - a combination of sound methodology and expert contribution 367. I.S. EN ISO 19901-3:2010 Date published 7 JANUARY 2011 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2010) 368. I.S. EN ISO 15549:2010 Date published 7 JANUARY 2011 Non-destructive testing - Eddy current testing - General principles (ISO 15549:2008) 369. I.S. EN ISO 10808:2010 Date published 7 JANUARY 2011 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010) 370. S.R. CWA 16234-1:2010 Date published 7 JANUARY 2011 European e-Competence Framework 2.0 - Part 1: A common European framework for ICT Professionals in all industry sectors 371. S.R. CEN TS 15844-2:2010 Date published 10 JANUARY 2011 Postal services - ID-tagging of letter mail items - Part 2: BNB-78 Encoding Specification 372. I.S. EN ISO 877-2:2010 Date published 10 JANUARY 2011 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)

Date: 18/07/2018 Page 29 373. I.S. EN ISO 877-1:2010 Date published 10 JANUARY 2011 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877 -1:2009) 374. I.S. EN 12853:2001+A1:2010/AC:2010 Date published 10 JANUARY 2011 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements 375. I.S. EN ISO 6145-9:2010 Date published 10 JANUARY 2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009) 376. I.S. EN 2481:2010 Date published 10 JANUARY 2011 Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Forgings - De ≤ 75 mm 377. I.S. EN 3687:2010 Date published 10 JANUARY 2011 Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 °C 378. S.R. CEN TS 15844-1:2010 Date published 10 JANUARY 2011 Postal services - ID-tagging of letter mail items - Part 1: ID-tag structure, message and binary 379. I.S. EN ISO 3661:2010 Date published 10 JANUARY 2011 End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977) 380. I.S. EN ISO 877-3:2010 Date published 10 JANUARY 2011 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) 381. S.R. CEN TS 15844-3:2010 Date published 10 JANUARY 2011 Postal services - ID-tagging of letter mail items - Part 3: BNB-62 encoding specification 382. I.S. EN 4659:2010 Date published 10 JANUARY 2011 Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 MPa 383. I.S. EN 1110:2010 Date published 10 JANUARY 2011 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature 384. I.S. EN 2483:2010 Date published 10 JANUARY 2011 Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm

Date: 18/07/2018 Page 30 385. S.R. CEN TS 15844-5:2010 Date published 10 JANUARY 2011 Postal services - ID-tagging of letter mail items - Part 5: 4-state encoding specification for small letters 386. S.R. CEN TS 15844-4:2010 Date published 10 JANUARY 2011 Postal services - ID-tagging of letter mail items - Part 4: State encoding specification for flats 387. S.R. CWA 16255:2010 Date published 10 JANUARY 2011 Meat raw materials obtained by deboning - Assessment of the muscle fibre structure - Pork, poultry and rabbit 388. I.S. EN 4658:2010 Date published 10 JANUARY 2011 Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa 389. I.S. EN 13109:2010 Date published 10 JANUARY 2011 LPG equipment and accessories - LPG tanks and drums - Disposal 390. I.S. EN ISO 2858:2010 Date published 10 JANUARY 2011 End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions (ISO 2858:1975) 391. I.S. EN ISO 6145-7:2010 Date published 10 JANUARY 2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009) 392. I.S. EN 2482:2010 Date published 10 JANUARY 2011 Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm 393. I.S. EN ISO 6145-5:2010 Date published 10 JANUARY 2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009) 394. I.S. EN 12816:2010 Date published 10 JANUARY 2011 LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal 395. I.S. EN 60684-3-283:2011 Date published 13 JANUARY 2011 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 283: Heat-shrinkable, polyolefin sleeving, for bus-bar insulation (IEC 60684-3 -283:2010 (EQV)) 396. I.S. EN 61058-2-1:2011 Date published 13 JANUARY 2011 Switches for appliances -- Part 2-1: Particular requirements for cord switches (IEC 61058-2-1:2010 (EQV))

Date: 18/07/2018 Page 31 397. I.S. EN 60947-1:2007/A1:2011 Date published 13 JANUARY 2011 Low-voltage switchgear and controlgear -- Part 1: General rules (IEC 60947 -1:2007/A1:2010 (EQV)) 398. I.S. EN 62481-3:2011 Date published 13 JANUARY 2011 Digital living network alliance (DLNA) home networked device interoperability guidelines -- Part 3: Link protection (IEC 62481-3:2010 (EQV)) 399. I.S. EN 62287-1:2011 Date published 13 JANUARY 2011 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) -- Part 1: Carrier-sense time division multiple access (CSTDMA) techniques (IEC 62287-1:2010 (EQV)) 400. I.S. EN 61162-1:2011 Date published 13 JANUARY 2011 Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 1: Single talker and multiple listeners (IEC 61162-1:2010 (EQV)) 401. I.S. EN ISO 3747:2010/LC:2010 Date published 10 JANUARY 2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) 402. I.S. EN ISO 80369-1:2010 Date published 12 JANUARY 2011 Small bore connectors for liquids and gases in healthcare applications -- Part 1: General requirements (ISO 80369-1:2010 (ISO 80369-1:2010) (EQV)) 403. I.S. 432:2010/AC:2011 Date published 11 JANUARY 2011 Packaged groundwater 404. I.S. EN 14034-4:2004+A1:2011 Date published 19 JANUARY 2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds 405. I.S. EN 13044-2:2011 Date published 19 JANUARY 2011 Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation 406. I.S. EN 13044-3:2011 Date published 19 JANUARY 2011 Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation 407. I.S. EN 13044-1:2011 Date published 19 JANUARY 2011 Intermodal Loading Units - Marking - Part 1: Markings for identification 408. I.S. EN 13341:2005+A1:2011 Date published 19 JANUARY 2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requiremen

Date: 18/07/2018 Page 32 409. I.S. EN 1679-1:1998+A1:2011 Date published 19 JANUARY 2011 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines 410. I.S. EN 14034-1:2004+A1:2011 Date published 19 JANUARY 2011 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds 411. I.S. EN 12586:2007+A1:2011 Date published 19 JANUARY 2011 Child use and care articles - Soother holder - Safety requirements and test methods 412. I.S. EN 14034-3:2006+A1:2011 Date published 19 JANUARY 2011 Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds 413. I.S. EN ISO 29621:2011 Date published 19 JANUARY 2011 Cosmetics - Microbiology - Guidelines for the risk assessment and identification of microbiologically low-risk products (ISO 29621:2010) 414. I.S. EN 476:2011 Date published 19 JANUARY 2011 General requirements for components used in drains and sewers 415. I.S. EN 14034-2:2006+A1:2011 Date published 19 JANUARY 2011 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds 416. I.S. EN 50122-1:2011 Date published 31 JANUARY 2011 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 1: Protective provisions against electric shock 417. I.S. EN 60747-16-4:2004/A1:2011 Date published 31 JANUARY 2011 Semiconductor devices -- Part 16-4: Microwave integrated circuits - Switches (IEC 60747-16-4:2004/A1:2009 (EQV)) 418. I.S. EN 60974-6:2011 Date published 31 JANUARY 2011 Arc welding equipment -- Part 6: Limited duty equipment (IEC 60974-6:2010 (EQV)) 419. I.S. EN 61591:1998/A2:2011 Date published 31 JANUARY 2011 Household range hoods and other cooking fume extractors - Methods for measuring performance (IEC 61591:1997/A2:2010 (EQV)) 420. I.S. EN 62148-2:2011 Date published 31 JANUARY 2011 Fibre optic active components and devices - Package and interface standards -- Part 2: SFF 10-pin transceivers (IEC 62148-2:2010 (EQV)) 421. I.S. EN 62148-3:2011 Date published 31 JANUARY 2011 Fibre optic active components and devices - Package and interface standards -- Part 3: SFF 20-pin transceivers (IEC 62148-3:2010 (EQV))

Date: 18/07/2018 Page 33 422. I.S. EN 62150-2:2011 Date published 31 JANUARY 2011 Fibre optic active components and devices - Test and measurement procedures -- Part 2: ATM-PON transceivers (IEC 62150-2:2010 (EQV)) 423. I.S. EN 60079-19:2011 Date published 31 JANUARY 2011 Explosive atmospheres -- Part 19: Equipment repair, overhaul and reclamation (IEC 60079-19:2010 (EQV)) 424. I.S. EN 13480-3:2002/LC:2010-12 Date published 13 JUNE 2011 Metallic industrial piping - Part 3: Design and calculation 425. I.S. EN 13480-5:2002/LC:2010-12 Date published 13 JUNE 2011 Metallic industrial piping - Part 5: Inspection and testing 426. I.S. EN 60601-2-33:2010/AC:2010 Date published 20 JANUARY 2011 Medical electrical equipment -- Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis (IEC 60601-2-33:2010 (EQV)) 427. I.S. EN 61242:1997/AC:2010 Date published 20 JANUARY 2011 Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995 (MOD)) 428. I.S. EN 50341-3:2001/AC:2010 Date published 20 JANUARY 2011 Overhead electrical lines exceeding AC 45 kV -- Part 3: Set of National Normative Aspects 429. I.S. EN 50160:2010/AC:2010 Date published 9 MARCH 2011 Voltage characteristics of electricity supplied by public electricity networks 430. I.S. HD 60364-7-721:2009/AC:2010 Date published 9 MARCH 2011 Low-voltage electrical installations -- Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans (IEC 60364-7 -721:2007 (MOD)) 431. I.S. 3218:2009/AC:2011 Date published 1 FEBRUARY 2011 Fire detection and alarm systems for buildings - System design, installation, servicing and maintenance 432. I.S. EN 2591-102:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 102: Examination of Dimensions and Mass 433. I.S. EN 2591-201:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods - Part 201: Contact Resistance – Low Level

Date: 18/07/2018 Page 34 434. I.S. EN 2591-202:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 202: Contact Resistance at Rated Current 435. I.S. EN 2591-203:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 203: Electrical Continuity at Microvolt Level 436. I.S. EN 2591-205:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 205: Housing (shell) Electrical Continuity 437. I.S. EN 2591-207:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 207: Voltage Proof Test 438. I.S. EN 2591-208:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 208: Temperature Rise Due to Rated Current 439. I.S. EN 2591-209:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 209: Current temperature derating 440. I.S. EN 2591-401:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods - Part 401: Acceleration, steady state 441. I.S. EN 62149-5:2011 Date published 1 FEBRUARY 2011 Fibre optic active components and devices - Performance standards -- Part 5: ATM- PON transceivers with LD driver and CDR ICs (IEC 62149-5:2009 (EQV)) 442. I.S. EN 60534-8-3:2011 Date published 1 FEBRUARY 2011 Industrial-process control valves -- Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method (IEC 60534-8-3:2010 (EQV)) 443. I.S. EN 60060-2:2011 Date published 14 FEBRUARY 2011 High-voltage test techniques -- Part 2: Measuring systems (IEC 60060-2:2010 (EQV)) 444. I.S. EN 61746-2:2011 Date published 1 FEBRUARY 2011 Calibration of optical time-domain reflectometers (OTDR) -- Part 2: OTDR for multimode fibres (IEC 61746-2:2010 (EQV)) 445. I.S. EN 61439-5:2011 Date published 1 FEBRUARY 2011 Low-voltage switchgear and controlgear assemblies -- Part 5: Assemblies for power distribution in public networks (IEC 61439-5:2010 (EQV))

Date: 18/07/2018 Page 35 446. I.S. EN 2591-204:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 204: Discontinuity of Contacts in the Microsecond Range 447. I.S. EN 2591-206:1996 Date published 20 JANUARY 2011 Aerospace Series – Elements of Electrical and optical connection – Test Methods – Part 206: Measurement of Insulation Resistance 448. I.S. EN 15807:2011 Date published 27 JANUARY 2011 Railway applications - Pneumatic half couplings 449. I.S. EN ISO 3405:2011 Date published 27 JANUARY 2011 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) 450. S.R. CEN TS 15121-1:2011 Date published 27 JANUARY 2011 Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations 451. I.S. EN ISO 1519:2011 Date published 19 JANUARY 2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) 452. I.S. EN 71-1:2005+A14:2011 Date published 27 JANUARY 2011 Safety of toys - Part 1: Mechanical and physical properties 453. I.S. EN ISO 20843:2011 Date published 27 JANUARY 2011 Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011) 454. I.S. EN 12115:2011 Date published 27 JANUARY 2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification 455. I.S. EN 13772:2011 Date published 27 JANUARY 2011 Textiles and textile products - Burning behaviour - Curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source 456. I.S. EN 1794-1:2011 Date published 27 JANUARY 2011 Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements 457. S.R. CEN TS 15121-2:2011 Date published 27 JANUARY 2011 Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service 458. I.S. EN ISO 28399:2011 Date published 27 JANUARY 2011 Dentistry - Products for external tooth bleaching (ISO 28399:2011)

Date: 18/07/2018 Page 36 459. I.S. EN ISO 20783-1:2011 Date published 27 JANUARY 2011 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011) 460. I.S. EN 1794-2:2011 Date published 27 JANUARY 2011 Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements 461. I.S. EN 1097-1:2011 Date published 27 JANUARY 2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) 462. I.S. EN 1367-5:2011 Date published 27 JANUARY 2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock 463. I.S. EN 15962:2011 Date published 27 JANUARY 2011 Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients 464. I.S. EN ISO 4254-11:2010/LC:2010 Date published 27 JANUARY 2011 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) 465. I.S. EN 4670:2010/LC:2010 Date published 27 JANUARY 2011 Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm 466. I.S. EN 16147:2011 Date published 3 FEBRUARY 2011 Heat pumps with electrically driven 16147:2011compressors - Testing and requirements for marking of domestic hot water units 467. I.S. EN ISO 14341:2011 Date published 3 FEBRUARY 2011 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) 468. I.S. EN 12999:2011 Date published 3 FEBRUARY 2011 Cranes - Loader cranes 469. I.S. EN 15011:2011 Date published 3 FEBRUARY 2011 Cranes - Bridge and gantry cranes 470. I.S. EN 13554:2011 Date published 3 FEBRUARY 2011 Non-destructive testing - Acoustic emission testing - General principles 471. I.S. EN 12758:2011 Date published 3 FEBRUARY 2011 Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties

Date: 18/07/2018 Page 37 472. I.S. EN 15080-12:2011 Date published 3 FEBRUARY 2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls 473. I.S. EN 15979:2011 Date published 3 FEBRUARY 2011 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation 474. I.S. EN 10305-4:2011 Date published 3 FEBRUARY 2011 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems 475. S.R. CWA 16259:2011 Date published 3 FEBRUARY 2011 Responsible Remote Gambling Measures 476. I.S. EN 15991:2011 Date published 3 FEBRUARY 2011 Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV) 477. I.S. EN ISO 11925-2:2010/AC:2011 Date published 3 FEBRUARY 2011 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test - Technical Corrigendum 1 (ISO 11925-2:2010/Cor 1:2011) 478. I.S. EN 60747-5-5:2011 Date published 15 FEBRUARY 2011 Semiconductor devices - Discrete devices -- Part 5-5: Optoelectronic devices - Photocouplers (IEC 60747-5-5:2007 (EQV)) 479. I.S. EN 62341-6-1:2011 Date published 15 FEBRUARY 2011 Organic light emitting diode (OLED) displays -- Part 6-1: Measuring methods of optical and electro-optical parameters (IEC 62341-6-1:2009 (EQV)) 480. I.S. EN 61881-1:2011 Date published 15 FEBRUARY 2011 Railway applications - Rolling stock equipment - Capacitors for power electronics -- Part 1: Paper/plastic film capacitors (IEC 61881-1:2010 (EQV)) 481. I.S. EN 60252-1:2011 Date published 15 FEBRUARY 2011 AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation (IEC 60252-1:2010 (EQV)) 482. I.S. EN 50174-2:2009/A1:2011 Date published 15 FEBRUARY 2011 Information technology - Cabling installation -- Part 2: Installation planning and practices inside buildings 483. I.S. EN 62507-1:2011 Date published 15 FEBRUARY 2011 Identification systems enabling unambiguous information interchange - Requirements -- Part 1: Principles and methods (IEC 62507-1:2010 (EQV))

Date: 18/07/2018 Page 38 484. I.S. EN 60763-1:2011 Date published 15 FEBRUARY 2011 Laminated pressboard for electrical purposes -- Part 1: Definitions, classification and general requirements (IEC 60763-1:2010 (EQV)) 485. I.S. EN 60763-3-1:2011 Date published 15 FEBRUARY 2011 Laminated pressboard for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010 (EQV)) 486. I.S. EN 50551-1:2011 Date published 15 FEBRUARY 2011 Simplex and duplex cables to be used for cords -- Part 1: Blank Detail Specification and minimum requirements 487. I.S. EN 60749-15:2010/AC:2011 Date published 15 FEBRUARY 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 15: Resistance to soldering temperature for through-hole mounted devices 488. I.S. EN 61300-2-9:2010/AC:2011 Date published 16 FEBRUARY 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-9: Tests - Shock 489. I.S. EN 14081-1:2005+A1:2011 Date published 9 FEBRUARY 2011 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements 490. I.S. EN 15241:2007/AC:2011 Date published 9 FEBRUARY 2011 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in buildings 491. I.S. EN ISO 12863:2010/AC:2011 Date published 9 FEBRUARY 2011 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010/Corr 1:2011) 492. I.S. EN ISO 14125:1998/A1:2011 Date published 6 APRIL 2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011) 493. I.S. EN ISO 3656:2011 Date published 9 FEBRUARY 2011 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2011) 494. I.S. EN ISO 28927-11:2011 Date published 9 FEBRUARY 2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) 495. I.S. EN ISO 3927:2011 Date published 9 FEBRUARY 2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)

Date: 18/07/2018 Page 39 496. I.S. EN 15376:2011 Date published 9 FEBRUARY 2011 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods 497. I.S. EN 14127:2011 Date published 9 FEBRUARY 2011 Non-destructive testing - Ultrasonic thickness measurement 498. I.S. EN ISO/IEC 17021:2011 Date published 9 FEBRUARY 2011 Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) 499. I.S. EN ISO 24503:2011 Date published 9 FEBRUARY 2011 Ergonomics - Accessible design - Tactile dots and bars on consumer products (ISO 24503:2011) 500. I.S. EN 12463:2004+A1:2011 Date published 9 FEBRUARY 2011 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements 501. S.R. CEN ISO TS 11133-2:2004/A1:2011 Date published 6 APRIL 2011 Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 2: Practical guidelines on performance testing of culture media - Amendment 1: Test microorganisms for commonly used culture media (ISO/ 502. I.S. EN 15430-1:2007+A1:2011 Date published 9 FEBRUARY 2011 Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition 503. I.S. EN ISO 14155:2011 Date published 9 FEBRUARY 2011 Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011) 504. I.S. EN ISO 8251:2011 Date published 9 FEBRUARY 2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011) 505. I.S. EN ISO 13365:2011 Date published 27 JANUARY 2011 Leather - Chemical tests - Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography (ISO 13365:2011) 506. I.S. EN 61400-25-6:2011 Date published 14 FEBRUARY 2011 Wind turbines -- Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring (IEC 61400-25 -6:2010 (EQV)) 507. I.S. EN 61400-22:2011 Date published 14 FEBRUARY 2011 Wind turbines -- Part 22: Conformity testing and certification (IEC 61400-22:2010 (EQV))

Date: 18/07/2018 Page 40 508. I.S. EN 61000-4-16:1998/A2:2011 Date published 14 FEBRUARY 2011 Electromagnetic compatibility (EMC) -- Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998/A2:2009 (EQV)) 509. I.S. EN 61029-2-4:2011 Date published 14 FEBRUARY 2011 Safety of transportable motor-operated electric tools -- Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 (MOD) + A1:2001 (MOD)) 510. I.S. EN 60519-1:2011 Date published 14 FEBRUARY 2011 Safety in electroheating installations -- Part 1: General requirements (IEC 60519-1:2010 (EQV)) 511. I.S. EN 50289-4-17:2011 Date published 16 FEBRUARY 2011 Communication cables - Specifications for test methods -- Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable 512. I.S. EN 50377-15-1:2011 Date published 16 FEBRUARY 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre 513. I.S. EN 60770-1:2011 Date published 22 FEBRUARY 2011 Transmitters for use in industrial-process control systems -- Part 1: Methods for performance evaluation (IEC 60770-1:2010 (EQV)) 514. I.S. EN 60068-2-5:2011 Date published 22 FEBRUARY 2011 Environmental testing -- Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing (IEC 60068-2-5:2010 (EQV) + corrigendum Dec. 2010 (EQV)) 515. I.S. EN 50543:2011 Date published 22 FEBRUARY 2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods 516. I.S. EN 60252-2:2011 Date published 16 FEBRUARY 2011 AC motor capacitors -- Part 2: Motor start capacitors (IEC 60252-2:2010 (EQV)) 517. I.S. EN 62359:2011 Date published 16 FEBRUARY 2011 Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields (IEC 62359:2010 (EQV)) 518. I.S. EN 62464-2:2011 Date published 16 FEBRUARY 2011 Magnetic resonance equipment for medical imaging -- Part 2: Classification criteria for pulse sequences (IEC 62464-2:2010 (EQV))

Date: 18/07/2018 Page 41 519. I.S. EN 62376:2011 Date published 16 FEBRUARY 2011 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results (IEC 62376:2010 (EQV)) 520. I.S. EN 15892:2011 Date published 17 FEBRUARY 2011 Railway applications - Noise Emission - Measurement of noise inside driver's cabs 521. S.R. CEN ISO TR 13881:2011 Date published 17 FEBRUARY 2011 Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000) 522. I.S. EN 15297:2011 Date published 17 FEBRUARY 2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn 523. S.R. CEN ISO TS 24817:2011 Date published 17 FEBRUARY 2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) 524. I.S. EN 410:2011 Date published 17 FEBRUARY 2011 Glass in building - Determination of luminous and solar characteristics of glazing 525. I.S. EN ISO 1833-24:2011 Date published 17 FEBRUARY 2011 Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) (ISO 1833-24:2010) 526. S.R. CEN TS 14038-2:2011 Date published 17 FEBRUARY 2011 Electrochemical re-alkalization and chloride extraction treatments for rein-forced concrete - Part 2: Chloride extraction 527. I.S. EN 15290:2011 Date published 17 FEBRUARY 2011 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti 528. S.R. CEN ISO TR 10400:2011 Date published 17 FEBRUARY 2011 Petroleum and natural gas industries - Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2007) 529. I.S. EN 13674-1:2011 Date published 17 FEBRUARY 2011 Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above 530. I.S. EN 13977:2011 Date published 17 FEBRUARY 2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance 531. S.R. CEN ISO TS 29001:2011 Date published 17 FEBRUARY 2011 Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010)

Date: 18/07/2018 Page 42 532. I.S. EN 15518-1:2011 Date published 17 FEBRUARY 2011 Winter maintenance equipment - Road weather information systems - Part 1: Global definitions and components 533. I.S. EN 15296:2011 Date published 17 FEBRUARY 2011 Solid biofuels - Conversion of analytical results from one basis to another 534. I.S. EN 15105:2011 Date published 17 FEBRUARY 2011 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content 535. S.R. CWA 16267:2011 Date published 17 FEBRUARY 2011 Guidelines for Sustainable Development of Historic and Cultural Cities - Qualicities 536. S.R. CEN TS 15293:2011 Date published 17 FEBRUARY 2011 Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods 537. I.S. EN 1829-2:2008/AC:2011 Date published 17 FEBRUARY 2011 High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors 538. I.S. EN 15104:2011 Date published 17 FEBRUARY 2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods 539. I.S. EN 673:2011 Date published 17 FEBRUARY 2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method 540. I.S. EN 15518-2:2011 Date published 17 FEBRUARY 2011 Winter maintenance equipment - Road weather information systems - Part 2: Road weather - Recommended observation and forecast 541. I.S. EN 15518-3:2011 Date published 17 FEBRUARY 2011 Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipments 542. I.S. EN 15289:2011 Date published 17 FEBRUARY 2011 Solid biofuels - Determination of total content of sulfur and chlorine 543. S.R. CLC/TR 50480:2011 Date published 22 FEBRUARY 2011 Determination of cross-sectional area of conductors and selection of protective devices 544. I.S. EN 62524:2011 Date published 22 FEBRUARY 2011 Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing (IEC 62524:2009 (EQV))

Date: 18/07/2018 Page 43 545. I.S. EN 60793-2-40:2011 Date published 22 FEBRUARY 2011 Optical fibres -- Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres (IEC 60793-2-40:2009 (EQV)) 546. I.S. EN 62562:2011 Date published 22 FEBRUARY 2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010 (EQV)) 547. I.S. EN 60745-2-3:2011 Date published 22 FEBRUARY 2011 Hand-held motor-operated electric tools - Safety -- Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006 (MOD) + A1:2010 (MOD) + A1:2010/corrigendum Feb. 2011 (EQV)) 548. I.S. EN 62455:2011 Date published 22 FEBRUARY 2011 Internet protocol (IP) and transport stream (TS) based service access (IEC 62455:2010 (EQV)) 549. I.S. EN 61000-6-4:2007/A1:2011 Date published 22 FEBRUARY 2011 Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments (IEC 61000-6-4:2006/A1:2010 (EQV)) 550. I.S. EN 60793-1-30:2011 Date published 22 FEBRUARY 2011 Optical fibres -- Part 1-30: Measurement methods and test procedures - Fibre proof test (IEC 60793-1-30:2010 (EQV)) 551. S.R. CLC/TR 50555:2010/AC:2011 Date published 22 FEBRUARY 2011 Interruption indexes 552. I.S. EN 500-4:2011 Date published 23 FEBRUARY 2011 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines 553. I.S. EN 455-2:2009+A1:2011 Date published 23 FEBRUARY 2011 Medical gloves for single use - Part 2: Requirements and testing for physical properties 554. I.S. EN 14154-1:2005+A2:2011 Date published 18 APRIL 2011 Water meters - Part 1: General requirements 555. I.S. EN ISO 25539-1:2009/AC:2011 Date published 23 FEBRUARY 2011 Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO 25539-1:2003 including Amd 1:2005) 556. I.S. EN 15776:2011 Date published 23 FEBRUARY 2011 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %

Date: 18/07/2018 Page 44 557. I.S. EN 1949:2011 Date published 23 FEBRUARY 2011 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles 558. I.S. EN 13074-2:2011 Date published 23 FEBRUARY 2011 Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut- back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation 559. I.S. EN 13074-1:2011 Date published 23 FEBRUARY 2011 Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut- back or fluxed bituminous binders - Part 1: Recovery by evaporation 560. I.S. EN ISO 3580:2011 Date published 23 FEBRUARY 2011 Welding consumables - Covered electrodes for manual metal arc welding of creep- resisting steels - Classification (ISO 3580:2010) 561. I.S. EN ISO 25539-2:2009/AC:2011 Date published 23 FEBRUARY 2011 Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539 -2:2008) 562. I.S. EN 15977:2011 Date published 23 FEBRUARY 2011 Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation 563. I.S. EN 13126-19:2011 Date published 23 FEBRUARY 2011 Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices 564. S.R. CEN TS 15916-1:2011 Date published 23 FEBRUARY 2011 Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) 565. I.S. EN 12859:2011 Date published 23 FEBRUARY 2011 Gypsum blocks - Definitions, requirements and test methods 566. I.S. EN 12953-6:2011 Date published 23 FEBRUARY 2011 Shell Boilers - Part 6: Requirements for equipment for the boiler 567. I.S. EN 12513:2011 Date published 23 FEBRUARY 2011 Founding - Abrasion resistant cast irons 568. I.S. EN ISO 17072-2:2011 Date published 23 FEBRUARY 2011 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011) 569. I.S. EN ISO 14586:2011 Date published 23 FEBRUARY 2011 Hexalobular socket countersunk head tapping screws (ISO 14586:2011)

Date: 18/07/2018 Page 45 570. I.S. EN ISO 8624:2011 Date published 23 FEBRUARY 2011 Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2011) 571. I.S. EN ISO 5264-2:2011 Date published 23 FEBRUARY 2011 Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011) 572. I.S. EN ISO 14587:2011 Date published 23 FEBRUARY 2011 Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) 573. I.S. EN ISO 6892-2:2011 Date published 23 FEBRUARY 2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) 574. I.S. EN ISO 12966-2:2011 Date published 23 FEBRUARY 2011 Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 2: Preparation of methyl esters of fatty acids (ISO 12966-2:2011) 575. I.S. EN ISO 26945:2011 Date published 23 FEBRUARY 2011 Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011) 576. I.S. EN ISO 14585:2011 Date published 23 FEBRUARY 2011 Hexalobular socket pan head tapping screws (ISO 14585:2011) 577. I.S. EN ISO 3953:2011 Date published 23 FEBRUARY 2011 Metallic powders - Determination of tap density (ISO 3953:2011) 578. I.S. EN ISO 21090:2011 Date published 23 FEBRUARY 2011 Health Informatics - Harmonized data types for information interchange (ISO 21090:2011) 579. I.S. EN ISO 7263:2011 Date published 23 FEBRUARY 2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011) 580. I.S. EN ISO 17072-1:2011 Date published 23 FEBRUARY 2011 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011) 581. I.S. EN 50550:2011 Date published 2 MARCH 2011 Power frequency overvoltage protective device for household and similar applications (POP) 582. I.S. EN 61558-2-9:2011 Date published 2 MARCH 2011 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2 -9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2010 (EQV))

Date: 18/07/2018 Page 46 583. I.S. EN 50556:2011 Date published 2 MARCH 2011 Road traffic signal systems 584. I.S. EN 61850-7-3:2011 Date published 2 MARCH 2011 Communication networks and systems for power utility automation -- Part 7-3: Basic communication structure - Common data classes (IEC 61850-7-3:2010 (EQV)) 585. I.S. HD 60364-5-52:2011 Date published 2 MARCH 2011 Low-voltage electrical installations -- Part 5-52: Selection and erection of electrical equipment - Wiring systems (IEC 60364-5-52:2009 (MOD) + corrigendum Feb. 2011 (EQV)) 586. I.S. EN 62006:2011 Date published 2 MARCH 2011 Hydraulic machines - Acceptance tests of small hydroelectric installations (IEC 62006:2010 (EQV)) 587. I.S. EN 61558-2-20:2011 Date published 2 MARCH 2011 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2 -20: Particular requirements and tests for small reactors (IEC 61558-2-20:2010 (EQV)) 588. I.S. EN 61834-4:1998/A1:2011 Date published 2 MARCH 2011 Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 4: Pack header table and contents (IEC 61834-4:1998/A1:2010 (EQV)) 589. S.R. CLC/TS 60034-18-42:2011 Date published 2 MARCH 2011 Rotating electrical machines -- Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters (IEC/TS 60034-18-42:2008 (EQV)) 590. I.S. EN 60065:2002/A12:2011 Date published 2 MARCH 2011 Audio, video and similar electronic apparatus - Safety requirements 591. I.S. EN 60950-1:2006/A12:2011 Date published 2 MARCH 2011 Information technology equipment - Safety -- Part 1: General requirements 592. I.S. EN 60728-3:2011 Date published 2 MARCH 2011 Cable networks for television signals, sound signals and interactive services -- Part 3: Active wideband equipment for cable networks (IEC 60728-3:2010 (EQV)) 593. I.S. EN 50090-1:2011 Date published 2 MARCH 2011 Home and Building Electronic Systems (HBES) -- Part 1: Standardization structure 594. I.S. EN 62305-1:2011 Date published 2 MARCH 2011 Protection against lightning -- Part 1: General principles (IEC 62305-1:2010 (MOD)) 595. I.S. EN 62305-4:2011 Date published 2 MARCH 2011 Protection against lightning -- Part 4: Electrical and electronic systems within structures (IEC 62305-4:2010 (MOD))

Date: 18/07/2018 Page 47 596. I.S. EN 62496-3:2011 Date published 2 MARCH 2011 Optical circuit boards -- Part 3: Performance standards - General and guidance (IEC 62496-3:2011 (EQV)) 597. S.R. CLC/TS 60034-31:2011 Date published 2 MARCH 2011 Rotating electrical machines -- Part 31: Selection of energy-efficient motors including variable speed applications - Application guide (IEC/TS 60034-31:2010 (EQV)) 598. S.R. CLC/TS 60034-24:2011 Date published 2 MARCH 2011 Rotating electrical machines -- Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide (IEC/TS 60034-24:2009 (EQV)) 599. S.R. CLC/TS 60034-27:2011 Date published 2 MARCH 2011 Rotating electrical machines -- Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines (IEC/TS 60034-27:2006 (EQV)) 600. S.R. CLC/TS 50238-2:2010/AC:2011 Date published 2 MARCH 2011 Railway applications - Compatibility between rolling stock and train detection systems -- Part 2: Compatibility with track circuits 601. I.S. EN 1559-1:2011 Date published 3 MARCH 2011 Founding - Technical conditions of delivery - Part 1: General 602. I.S. EN 14276-2:2007+A1:2011 Date published 3 MARCH 2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements 603. I.S. EN 15879-1:2011 Date published 3 MARCH 2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps 604. I.S. EN 1560:2011 Date published 3 MARCH 2011 Founding - Designation system for cast iron - Material symbols and material numbers 605. I.S. EN 1113:2008+A1:2011 Date published 3 MARCH 2011 Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification 606. I.S. EN 2826:2011 Date published 3 MARCH 2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke 607. I.S. EN 15316-4-8:2011 Date published 3 MARCH 2011 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems

Date: 18/07/2018 Page 48 608. I.S. EN 4660-003:2011 Date published 3 MARCH 2011 Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network 609. I.S. EN 4660-002:2011 Date published 3 MARCH 2011 Aerospace series - Modular and Open Avionics Architectures - Part 002: Common Functional Modules 610. I.S. EN 15037-2:2009+A1:2011 Date published 3 MARCH 2011 Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks 611. I.S. EN 14033-1:2011 Date published 3 MARCH 2011 Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running 612. I.S. EN 14276-1:2006+A1:2011 Date published 3 MARCH 2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements 613. I.S. EN 15037-3:2009+A1:2011 Date published 3 MARCH 2011 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks 614. I.S. EN 4660-004:2011 Date published 3 MARCH 2011 Aerospace series - Modular and Open Avionics Architectures - Part 004: Packaging 615. I.S. EN 4660-001:2011 Date published 3 MARCH 2011 Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture 616. I.S. EN 2240-051:2011 Date published 3 MARCH 2011 Aerospace series - Lamps, incandescent - Part 051: Lamp, code 1163 - Product standard 617. I.S. EN 60204-33:2011 Date published 21 MARCH 2011 Safety of machinery - Electrical equipment of machines -- Part 33: Requirements for semiconductor fabrication equipment (IEC 60204-33:2009 (MOD)) 618. I.S. EN 50174-1:2009/A1:2011 Date published 21 MARCH 2011 Information technology - Cabling installation -- Part 1: Installation specification and quality assurance 619. I.S. EN 62132-2:2011 Date published 21 MARCH 2011 Integrated circuits - Measurement of electromagnetic immunity -- Part 2: Measurement of radiated immunity - TEM cell and wideband TEM cell method (IEC 62132-2:2010 (EQV)) 620. I.S. EN 61746-1:2011 Date published 21 MARCH 2011 Calibration of optical time-domain reflectometers (OTDR) -- Part 1: OTDR for single- mode fibres (IEC 61746-1:2009 (EQV))

Date: 18/07/2018 Page 49 621. I.S. EN 62489-2:2011 Date published 21 MARCH 2011 Electroacoustics - Audio-frequency induction loop systems for assisted hearing -- Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure (IEC 62489-2:2011 (EQV)) 622. I.S. EN 61853-1:2011 Date published 21 MARCH 2011 Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating (IEC 61853-1:2011 (EQV)) 623. I.S. EN 61169-18:2011 Date published 21 MARCH 2011 Radio-frequency connectors -- Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA (IEC 61169-18:2011 (EQV)) 624. I.S. EN 61169-19:2011 Date published 21 MARCH 2011 Radio-frequency connectors -- Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB (IEC 61169-19:2011 (EQV)) 625. I.S. EN 61300-2-23:2011 Date published 21 MARCH 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices (IEC 61300-2-23:2010 (EQV)) 626. I.S. EN 60749-23:2004/A1:2011 Date published 21 MARCH 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 23: High temperature operating life (IEC 60749-23:2004/A1:2011 (EQV)) 627. I.S. EN 15986:2011 Date published 21 MARCH 2011 Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates 628. I.S. EN 62305-3:2011 Date published 21 MARCH 2011 Protection against lightning -- Part 3: Physical damage to structures and life hazard (IEC 62305-3:2010 (MOD)) 629. I.S. EN 62496-4:2011 Date published 21 MARCH 2011 Optical circuit boards -- Part 4: Interface standards - General and guidance (IEC 62496 -4:2011 (EQV)) 630. I.S. EN 62496-2-2:2011 Date published 21 MARCH 2011 Optical circuit boards -- Part 2-2: Measurements - Dimensions of optical circuit boards (IEC 62496-2-2:2011 (EQV)) 631. I.S. EN 61966-12-1:2011 Date published 21 MARCH 2011 Multimedia systems and equipment - Colour measurement and management -- Part 12 -1: Metadata for identification of colour gamut (Gamut ID) (IEC 61966-12-1:2011 (EQV))

Date: 18/07/2018 Page 50 632. I.S. EN 62561-4:2011 Date published 21 MARCH 2011 Lightning protection system components (LPSC) -- Part 4: Requirements for conductor fasteners (IEC 62561-4:2010 (MOD)) 633. I.S. EN 60335-2-9:2003/A13:2010/AC:2011 Date published 21 MARCH 2011 Household and similar electrical appliances - Safety -- Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances 634. I.S. EN 61770:2009/AC:2011 Date published 21 MARCH 2011 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets 635. I.S. EN ISO 22868:2011 Date published 11 MARCH 2011 Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) 636. I.S. EN ISO 4136:2011 Date published 11 MARCH 2011 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2001) 637. I.S. EN ISO 2811-3:2011 Date published 11 MARCH 2011 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811 -3:2011) 638. I.S. EN ISO 17637:2011 Date published 11 MARCH 2011 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003) 639. S.R. CEN TR 16092:2011 Date published 11 MARCH 2011 Electronic fee collection - Requirements for pre-payment systems 640. I.S. EN ISO 10748:2011 Date published 11 MARCH 2011 Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011) 641. I.S. EN 15986:2011 Date published 11 MARCH 2011 Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates 642. I.S. EN ISO 9016:2011 Date published 11 MARCH 2011 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2001) 643. I.S. EN ISO 2811-1:2011 Date published 11 MARCH 2011 Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811 -1:2011) 644. S.R. CWA 16275:2011 Date published 11 MARCH 2011 Guidelines for the selection of consultants advising SMEs on integrated quality, environment, health and safety management systems

Date: 18/07/2018 Page 51 645. I.S. EN 2240-056:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 056: Lamp, code 1506 - Product standard 646. I.S. EN 10351:2011 Date published 11 MARCH 2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] 647. I.S. EN ISO 5178:2011 Date published 11 MARCH 2011 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001) 648. I.S. EN 15973:2011 Date published 11 MARCH 2011 Rubber- or plastic-coated fabrics - Upholstery fabrics - Resistance to soiling 649. I.S. EN 2240-052:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 052: Lamp, code 1222 - Product standard 650. I.S. EN 2240-057:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 057: Lamp, code 1512 - Product standard 651. I.S. EN 2240-060:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 060: Lamp, code 1619 - Product standard 652. I.S. EN 624:2011 Date published 11 MARCH 2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats 653. I.S. EN ISO 3381:2011 Date published 11 MARCH 2011 Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) 654. I.S. EN ISO 8994:2011 Date published 11 MARCH 2011 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2011) 655. I.S. EN 2240-054:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 054: Lamp, code 1317 - Product standard 656. I.S. EN ISO 9015-2:2011 Date published 11 MARCH 2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2003)

Date: 18/07/2018 Page 52 657. I.S. EN ISO 5667-23:2011 Date published 11 MARCH 2011 Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters (ISO 5667-23:2011) 658. I.S. EN 15643-2:2011 Date published 11 MARCH 2011 Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance 659. I.S. EN ISO 22434:2011 Date published 11 MARCH 2011 Transportable gas cylinders - Inspection and maintenance of cylinder valves (ISO 22434:2006) 660. I.S. EN ISO 2811-4:2011 Date published 11 MARCH 2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) 661. I.S. EN ISO 9015-1:2011 Date published 11 MARCH 2011 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) 662. I.S. EN 2240-055:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 055: Lamp, code 1495 - Product standard 663. I.S. EN 2240-058:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 058: Lamp, code 1524 - Product standard 664. I.S. EN ISO 2811-2:2011 Date published 11 MARCH 2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) 665. I.S. EN ISO 3107:2011 Date published 11 MARCH 2011 Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO 3107:2011) 666. I.S. EN 15964:2011 Date published 11 MARCH 2011 Breath alcohol test devices other than single use devices - Requirements and test methods 667. I.S. EN 2240-059:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 059: Lamp, code 1591 - Product standard 668. I.S. EN ISO 2106:2011 Date published 11 MARCH 2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)

Date: 18/07/2018 Page 53 669. I.S. EN ISO 4787:2011 Date published 11 MARCH 2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15) 670. I.S. EN 2240-053:2011 Date published 11 MARCH 2011 Aerospace series - Lamps, incandescent - Part 053: Lamp, code 1308 - Product standard 671. I.S. EN ISO 14155:2011/LC:2011-02 Date published 23 FEBRUARY 2011 Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011) 672. I.S. EN 61558-2-12:2011 Date published 22 MARCH 2011 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2 -12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage (IEC 61558-2-12:2011 (EQV)) 673. I.S. EN 62271-206:2011 Date published 22 MARCH 2011 High-voltage switchgear and controlgear -- Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV (IEC 62271 -206:2011 (EQV)) 674. I.S. EN 1811:2011 Date published 18 MARCH 2011 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin 675. I.S. EN 13089:2011 Date published 18 MARCH 2011 Mountaineering equipment - Ice-tools - Safety requirements and test methods 676. I.S. EN 15440:2011 Date published 18 MARCH 2011 Solid recovered fuels - Methods for the determination of biomass content 677. I.S. EN 13683:2003+A2:2011 Date published 18 MARCH 2011 Garden equipment - Integrally powered shredders/chippers - Safety 678. I.S. EN 15403:2011 Date published 18 MARCH 2011 Solid recovered fuels - Determination of ash content 679. I.S. EN 15407:2011 Date published 18 MARCH 2011 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content 680. S.R. CEN TR 16152:2011 Date published 18 MARCH 2011 Electronic fee collection - Personalisation and mounting of first mount OBE 681. I.S. EN 15358:2011 Date published 18 MARCH 2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels

Date: 18/07/2018 Page 54 682. I.S. EN 15442:2011 Date published 18 MARCH 2011 Solid recovered fuels - Methods for sampling 683. S.R. CEN TR 16142:2011 Date published 18 MARCH 2011 Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment 684. I.S. EN 12413:2007+A1:2011 Date published 18 MARCH 2011 Safety requirements for bonded abrasive products 685. I.S. EN 12846-2:2011 Date published 18 MARCH 2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders 686. I.S. EN 14961-5:2011 Date published 18 MARCH 2011 Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use 687. I.S. EN 15357:2011 Date published 18 MARCH 2011 Solid recovered fuels - Terminology, definitions and descriptions 688. I.S. EN 15414-3:2011 Date published 18 MARCH 2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample 689. I.S. EN 548:2011 Date published 18 MARCH 2011 Resilient floor coverings - Specification for plain and decorative linoleum 690. I.S. EN 651:2011 Date published 18 MARCH 2011 Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification 691. I.S. EN 12846-1:2011 Date published 18 MARCH 2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions 692. I.S. EN 15402:2011 Date published 18 MARCH 2011 Solid recovered fuels - Determination of the content of volatile matter 693. I.S. EN 15408:2011 Date published 18 MARCH 2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content 694. I.S. EN 15876-2:2011 Date published 18 MARCH 2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite 695. I.S. EN 15443:2011 Date published 18 MARCH 2011 Solid recovered fuels - Methods for the preparation of the laboratory sample

Date: 18/07/2018 Page 55 696. I.S. EN 649:2011 Date published 18 MARCH 2011 Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification 697. I.S. EN 15234-1:2011 Date published 18 MARCH 2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements 698. I.S. EN 16128:2011 Date published 18 MARCH 2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin 699. I.S. EN 15400:2011 Date published 18 MARCH 2011 Solid recovered fuels - Determination of calorific value 700. I.S. EN 652:2011 Date published 18 MARCH 2011 Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification 701. I.S. EN ISO 11073-10404:2011 Date published 24 MARCH 2011 Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter (ISO/IEEE 11073-10404:2010) 702. I.S. EN ISO 4016:2011 Date published 24 MARCH 2011 Hexagon head bolts - Product grade C (ISO 4016:2011) 703. I.S. EN 593:2009+A1:2011 Date published 24 MARCH 2011 Industrial valves - Metallic butterfly valves 704. I.S. EN ISO 11073-20601:2011 Date published 24 MARCH 2011 Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2010) 705. I.S. EN 13795:2011 Date published 24 MARCH 2011 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels 706. I.S. EN 15975-1:2011 Date published 24 MARCH 2011 Security of drinking water supply - Guidelines for risk and crisis management - Part 1: Crisis management 707. I.S. EN 13979-1:2003+A2:2011 Date published 24 MARCH 2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels 708. I.S. EN ISO 544:2011 Date published 24 MARCH 2011 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2011)

Date: 18/07/2018 Page 56 709. S.R. CEN TR 15642:2011 Date published 24 MARCH 2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007 710. I.S. EN ISO 17234-2:2011 Date published 24 MARCH 2011 Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 2: Determination of 4-aminoazobenzene (ISO 17234-2:2011) 711. I.S. EN ISO 11073-10407:2011 Date published 24 MARCH 2011 Health informatics - Personal health device communication - Part 10407: Device specialization - Blood pressure monitor (ISO/IEEE 11073-10407:2010) 712. I.S. EN ISO 11073-10408:2011 Date published 24 MARCH 2011 Health informatics - Personal health device communication - Part 10408: Device specialization - Thermometer (ISO/IEEE 11073-10408:2010) 713. I.S. EN ISO 4014:2011 Date published 24 MARCH 2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011) 714. I.S. EN ISO 8765:2011 Date published 24 MARCH 2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) 715. I.S. EN ISO 4254-5:2009/AC:2011 Date published 24 MARCH 2011 Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254 -5:2008) 716. I.S. EN ISO 11073-10415:2011 Date published 24 MARCH 2011 Health informatics - Personal health device communication - Part 10415: Device specialization - Weighing scale (ISO/IEEE 11073-10415:2010) 717. I.S. EN ISO 11073-10417:2011 Date published 24 MARCH 2011 Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter (ISO/IEEE 11073-10417:2010) 718. I.S. EN ISO 11073-10471:2011 Date published 24 MARCH 2011 Health Informatics - Personal health device communication - Part 10471: Device specialization - Independant living activity hub (ISO/IEEE 11073-10471:2010) 719. I.S. EN 13262:2004+A2:2011 Date published 24 MARCH 2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements 720. I.S. EN 13710:2011 Date published 24 MARCH 2011 European Ordering Rules - Ordering of characters from Latin, Greek, Cyrillic, Georgian and Armenian scripts 721. I.S. EN 13614:2011 Date published 24 MARCH 2011 Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test

Date: 18/07/2018 Page 57 722. I.S. EN 50518-3:2011 Date published 30 MARCH 2011 Monitoring and alarm receiving centre -- Part 3: Procedures and requirements for operation 723. I.S. EN 61753-131-3:2011 Date published 30 MARCH 2011 Fibre optic interconnecting devices and passive components - Performance standard -- Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment (IEC 61753-131-3:2010 (EQV)) 724. I.S. EN 60268-7:2011 Date published 30 MARCH 2011 Sound system equipment -- Part 7: Headphones and earphones (IEC 60268-7:2010 (EQV)) 725. I.S. EN 60461:2011 Date published 30 MARCH 2011 Time and control code (IEC 60461:2010 (EQV)) 726. I.S. HD 60364-4-42:2011 Date published 30 MARCH 2011 Low voltage electrical installations -- Part 4-42: Protection for safety - Protection against thermal effects (IEC 60364-4-42:2010 (MOD)) 727. I.S. EN 61058-2-5:2011 Date published 30 MARCH 2011 Switches for appliances -- Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:2010 (EQV)) 728. I.S. EN 50363-0:2011 Date published 30 MARCH 2011 Insulating, sheathing and covering materials for low-voltage energy cables -- Part 0: General introduction 729. I.S. EN 50363-2-1:2005/A1:2011 Date published 30 MARCH 2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-1: Cross-linked elastomeric sheathing compounds 730. I.S. EN 50363-3:2005/A1:2011 Date published 30 MARCH 2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds 731. I.S. EN 50363-5:2005/A1:2011 Date published 30 MARCH 2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 5: Halogen-free, cross-linked insulating compounds 732. I.S. EN 50363-6:2005/A1:2011 Date published 30 MARCH 2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 6: Halogen-free, cross-linked sheathing compounds 733. I.S. EN 50363-8:2005/A1:2011 Date published 30 MARCH 2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 8: Halogen-free, thermoplastic sheathing compounds

Date: 18/07/2018 Page 58 734. I.S. EN 50395:2005/A1:2011 Date published 30 MARCH 2011 Electrical test methods for low voltage energy cables 735. I.S. EN 50396:2005/A1:2011 Date published 30 MARCH 2011 Non electrical test methods for low voltage energy cables 736. I.S. EN 80001-1:2011 Date published 30 MARCH 2011 Application of risk management for IT-networks incorporating medical devices -- Part 1: Roles, responsibilities and activities (IEC 80001-1:2010 (EQV)) 737. I.S. EN 60601-2-45:2011 Date published 30 MARCH 2011 Medical electrical equipment -- Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices (IEC 60601-2-45:2011 (EQV)) 738. I.S. EN 62246-1:2011 Date published 30 MARCH 2011 Reed switches -- Part 1: Generic specification (IEC 62246-1:2011 (EQV)) 739. I.S. EN 61753-086-6:2011 Date published 30 MARCH 2011 Fibre optic interconnecting devices and passive components - Performance standard -- Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment (IEC 61753-086-6:2010 (EQV)) 740. I.S. EN 61300-2-17:2011 Date published 30 MARCH 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-17: Tests - Cold (IEC 61300-2-17:2010 (EQV)) 741. I.S. EN ISO/IEC 17021:2011 Date published 30 MARCH 2011 Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC/FDIS 17021:2010) (ISO/IEC 17021:2011 (EQV)) 742. I.S. EN 61936-1:2010/AC:2011 Date published 30 MARCH 2011 Power installations exceeding 1 kV a.c. -- Part 1: Common rules 743. I.S. EN 15813:2011 Date published 31 MARCH 2011 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures 744. I.S. EN 15820:2011 Date published 31 MARCH 2011 Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness 745. I.S. EN 488:2011 Date published 31 MARCH 2011 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

Date: 18/07/2018 Page 59 746. I.S. EN 16140:2011 Date published 31 MARCH 2011 Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles 747. I.S. EN 15817:2011 Date published 31 MARCH 2011 Polymer modified bituminous thick coatings for waterproofing - Water resistance 748. I.S. EN 15812:2011 Date published 31 MARCH 2011 Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability 749. I.S. EN 15815:2011 Date published 31 MARCH 2011 Polymer modified bituminous thick coatings for waterproofing - Resistance to compression 750. I.S. EN 15816:2011 Date published 31 MARCH 2011 Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain 751. I.S. EN 15818:2011 Date published 31 MARCH 2011 Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature 752. I.S. EN 15819:2011 Date published 31 MARCH 2011 Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried 753. I.S. EN 196-5:2011 Date published 31 MARCH 2011 Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement 754. I.S. EN ISO 22434:2011/LC:2011 Date published 31 MARCH 2011 Transportable gas cylinders - Inspection and maintenance of cylinder valves (ISO 22434:2006) 755. I.S. EN ISO 14579:2011 Date published 31 MARCH 2011 Hexalobular socket head cap screws (ISO 14579:2011) 756. I.S. EN ISO 14580:2011 Date published 31 MARCH 2011 Hexalobular socket cheese head screws (ISO 14580:2011) 757. I.S. EN ISO 14583:2011 Date published 31 MARCH 2011 Hexalobular socket pan head screws (ISO 14583:2011) 758. I.S. EN ISO 14584:2011 Date published 31 MARCH 2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)

Date: 18/07/2018 Page 60 759. I.S. EN 50377-4-4:2011 Date published 5 APRIL 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U 760. I.S. EN 50377-4-2:2011 Date published 5 APRIL 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U 761. I.S. EN 50377-13-2:2011 Date published 5 APRIL 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U 762. I.S. EN 50377-13-3:2011 Date published 5 APRIL 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U 763. I.S. EN 62116:2011 Date published 5 APRIL 2011 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters (IEC 62116:2008 (MOD)) 764. I.S. EN 50411-3-2:2011 Date published 5 APRIL 2011 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 3-2: Singlemode mechanical fibre splice 765. I.S. EN 62458:2011 Date published 5 APRIL 2011 Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters (IEC 62458:2010 (EQV)) 766. I.S. EN 62459:2011 Date published 5 APRIL 2011 Sound system equipment - Electroacoustic transducers - Measurement of suspension parts (IEC 62459:2010 (EQV)) 767. I.S. EN 61804-3:2011 Date published 5 APRIL 2011 Function Blocks (FB) for process control -- Part 3: Electronic Device Description Language (EDDL) (IEC 61804-3:2010 (EQV)) 768. I.S. EN 61000-6-3:2007/A1:2011 Date published 5 APRIL 2011 Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (IEC 61000-6 -3:2006/A1:2010 (EQV)) 769. I.S. EN 60974-4:2011 Date published 5 APRIL 2011 Arc welding equipment -- Part 4: Periodic inspection and testing (IEC 60974-4:2010 (EQV))

Date: 18/07/2018 Page 61 770. I.S. EN 60352-8:2011 Date published 5 APRIL 2011 Solderless connections -- Part 8: Compression mount connections - General requirements, test methods and practical guidance (IEC 60352-8:2011 (EQV)) 771. I.S. EN 60086-1:2011 Date published 5 APRIL 2011 Primary batteries -- Part 1: General (IEC 60086-1:2011 (EQV)) 772. I.S. EN 60086-2:2011 Date published 5 APRIL 2011 Primary batteries -- Part 2: Physical and electrical specifications (IEC 60086-2:2011 (EQV)) 773. I.S. EN 60086-3:2011 Date published 5 APRIL 2011 Primary batteries -- Part 3: Watch batteries (IEC 60086-3:2011 (EQV)) 774. I.S. EN 60300-3-12:2011 Date published 5 APRIL 2011 Dependability management -- Part 3-12: Application guide - Integrated logistic support (IEC 60300-3-12:2011 (EQV)) 775. I.S. EN 61753-087-2:2011 Date published 5 APRIL 2011 Fibre optic interconnecting devices and passive components - Performance standard -- Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment (IEC 61753 -087-2:2010 (EQV)) 776. I.S. EN 61236:2011 Date published 5 APRIL 2011 Live working - Saddles, stick clamps and their accessories (IEC 61236:2010 (EQV)) 777. S.R. CLC/TS 60034-18-33:2011 Date published 5 APRIL 2011 Rotating electrical machines -- Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses (IEC/TS 60034-18-33:2010 (EQV)) 778. S.R. CEN TS 15945:2011 Date published 31 MARCH 2011 Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging 779. I.S. EN 60350:2009/A11:2010 Date published 4 APRIL 2011 Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance 780. I.S. EN 50216-12:2011 Date published 8 APRIL 2011 Power transformer and reactor fittings -- Part 12: Fans 781. I.S. EN 60255-22-5:2011 Date published 8 APRIL 2011 Measuring relays and protection equipment -- Part 22-5: Electrical disturbance tests - Surge immunity test (IEC 60255-22-5:2008 (EQV)) 782. I.S. EN 60456:2005/A12:2011 Date published 8 APRIL 2011 Clothes washing machines for household use - Methods for measuring the performance

Date: 18/07/2018 Page 62 783. I.S. EN 60601-2-57:2011 Date published 13 APRIL 2011 Medical electrical equipment -- Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use (IEC 60601-2-57:2011 (EQV)) 784. I.S. EN 60076-2:2011 Date published 8 APRIL 2011 Power transformers -- Part 2: Temperature rise for liquid-immersed transformers (IEC 60076-2:2011 (EQV)) 785. I.S. EN 61000-4-22:2011 Date published 8 APRIL 2011 Electromagnetic compatibility (EMC) -- Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) (IEC 61000-4-22:2010 (EQV)) 786. I.S. EN 55016-2-1:2009/A1:2011 Date published 8 APRIL 2011 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements (CISPR 16-2-1:2008/A1:2010 (EQV)) 787. I.S. EN 55016-2-2:2011 Date published 8 APRIL 2011 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power (CISPR 16-2-2:2010 (EQV)) 788. I.S. EN 60130-9:2011 Date published 8 APRIL 2011 Connectors for frequencies below 3 MHz -- Part 9: Circular connectors for radio and associated sound equipment (IEC 60130-9:2011 (EQV)) 789. I.S. EN 62374-1:2010/AC:2011 Date published 8 APRIL 2011 Semiconductor devices -- Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers 790. I.S. EN 60601-2-52:2010/AC:2011 Date published 8 APRIL 2011 Medical electrical equipment -- Part 2-52: Particular requirements for basic safety and essential performance of medical beds 791. I.S. EN ISO 10893-4:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) 792. S.R. CEN TS 15901-12:2011 Date published 11 APRIL 2011 Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab friction tester (SFT) 793. I.S. EN ISO 12052:2011 Date published 11 APRIL 2011 Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management (ISO 12052:2006)

Date: 18/07/2018 Page 63 794. I.S. EN ISO 15015:2011 Date published 18 APRIL 2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) 795. I.S. EN ISO 10893-10:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) 796. I.S. EN ISO 12402-9:2006/A1:2011 Date published 18 APRIL 2011 Personal flotation devices - Part 9: Test methods - Amendment 1 (ISO 12402 -9:2006/Amd 1:2011) 797. S.R. CEN TS 15901-13:2011 Date published 11 APRIL 2011 Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph 798. I.S. EN ISO 12781-1:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) 799. S.R. CEN TS 81-11:2011 Date published 11 APRIL 2011 Safety rules for the construction and installation of lifts - Basics and interpretations - Part 11: Interpretations related to EN 81 family of standards 800. I.S. EN ISO 10510:2011 Date published 18 APRIL 2011 Tapping screw and washer assemblies with plain washers (ISO 10510:2011) 801. I.S. EN ISO 12180-1:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) 802. I.S. EN ISO 12780-1:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) 803. I.S. EN ISO 12780-2:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) 804. I.S. EN ISO 28722:2011 Date published 11 APRIL 2011 Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008) 805. I.S. EN ISO 28439:2011 Date published 18 APRIL 2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential electrical mobility analysing systems (ISO 28439:2011)

Date: 18/07/2018 Page 64 806. I.S. EN ISO 14534:2011 Date published 18 APRIL 2011 Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) 807. I.S. EN ISO 10893-8:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) 808. I.S. EN ISO 10893-9:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) 809. I.S. EN 54-1:2011 Date published 11 APRIL 2011 Fire detection and fire alarm systems - Part 1: Introduction 810. I.S. EN ISO 25378:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) 811. I.S. EN ISO 10893-3:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 1089 812. I.S. EN ISO 12402-7:2006/A1:2011 Date published 18 APRIL 2011 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods - Amendment 1 (ISO 12402-7:2006/Amd 1:2011) 813. I.S. EN 15827:2011 Date published 11 APRIL 2011 Railway applications - Requirements for bogies and running gears 814. I.S. EN ISO 28723:2011 Date published 11 APRIL 2011 Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers (ISO 28723:2008) 815. I.S. EN ISO 28764:2011 Date published 11 APRIL 2011 Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2008) 816. I.S. EN ISO 10893-12:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) 817. I.S. EN ISO 10893-1:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011)

Date: 18/07/2018 Page 65 818. I.S. EN ISO 10893-5:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) 819. I.S. EN ISO 12402-8:2006/A1:2011 Date published 18 APRIL 2011 Personal flotation devices - Part 8: Accessories - Safety requirements and test methods - Amendment 1 (ISO 12402-8:2006/Amd 1:2011) 820. I.S. EN ISO 28765:2011 Date published 11 APRIL 2011 Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2008) 821. I.S. EN ISO 80601-2-61:2011 Date published 18 APRIL 2011 Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011) 822. I.S. EN ISO 10893-11:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) 823. I.S. EN ISO 12181-1:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) 824. I.S. EN ISO 12181-2:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) 825. S.R. CEN TR 16149:2011 Date published 11 APRIL 2011 Guidance Document for drafting CEN/TC 158 Standards 826. I.S. EN ISO 12967-3:2011 Date published 11 APRIL 2011 Health informatics - Service architecture - Part 3: Computational viewpoint (ISO 12967 -3:2009) 827. I.S. EN 161:2011 Date published 11 APRIL 2011 Automatic shut-off valves for gas burners and gas appliances 828. I.S. EN ISO 10893-2:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) 829. I.S. EN ISO 10893-6:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011)

Date: 18/07/2018 Page 66 830. I.S. EN ISO 12781-2:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) 831. S.R. CEN TS 15901-11:2011 Date published 11 APRIL 2011 Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM 832. S.R. CEN TR 16148:2011 Date published 11 APRIL 2011 Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees 833. I.S. EN 13411-4:2011 Date published 11 APRIL 2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing 834. I.S. EN 13749:2011 Date published 11 APRIL 2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames 835. I.S. EN ISO 12180-2:2011 Date published 18 APRIL 2011 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) 836. I.S. EN ISO 28763:2011 Date published 11 APRIL 2011 Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air- gas and gas-gas heat exchangers - Specifications (ISO 28763:2008) 837. I.S. EN ISO 12967-1:2011 Date published 11 APRIL 2011 Health informatics - Service architecture - Part 1: Enterprise viewpoint (ISO 12967 -1:2009) 838. I.S. EN ISO 12967-2:2011 Date published 11 APRIL 2011 Health informatics - Service architecture - Part 2: Information viewpoint (ISO 12967 -2:2009) 839. I.S. EN ISO 7048:2011 Date published 18 APRIL 2011 Cross-recessed cheese head screws (ISO 7048:2011) 840. I.S. EN ISO 10893-7:2011 Date published 18 APRIL 2011 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011) 841. I.S. EN ISO 10350-2:2011 Date published 11 JULY 2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long- fibre-reinforced plastics (ISO 10350-2:2011) 842. S.R. CWA 16259:2011/LC:2011-03 Date published 11 JULY 2011 Responsible Remote Gambling Measures

Date: 18/07/2018 Page 67 843. I.S. EN 61300-3-22:2011 Date published 13 APRIL 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-22: Examinations and measurements - Ferrule compression force (IEC 61300-3-22:2010 (EQV)) 844. I.S. EN 61810-2:2011 Date published 13 APRIL 2011 Electromechanical elementary relays -- Part 2: Reliability (IEC 61810-2:2011 (EQV)) 845. I.S. EN 61810-2-1:2011 Date published 13 APRIL 2011 Electromechanical elementary relays -- Part 2-1: Reliability - Procedure for the verification of B10 values (IEC 61810-2-1:2011 (EQV)) 846. I.S. EN 61300-2-6:2011 Date published 13 APRIL 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-6: Tests - Tensile strength of coupling mechanism (IEC 61300-2-6:2010 (EQV)) 847. S.R. CWA 16266:2011 Date published 18 APRIL 2011 Curriculum for training ICT Professionals in Universal Design 848. I.S. EN 12808-4:2009/AC:2011 Date published 18 APRIL 2011 Grouts for tiles - Part 4: Determination of shrinkage 849. I.S. EN 88-1:2011 Date published 18 APRIL 2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa 850. I.S. EN 972:1998+A1:2010/AC:2011 Date published 18 APRIL 2011 Tannery machines - Reciprocating roller machines - Safety requirements 851. I.S. EN 13241-1:2003+A1:2011 Date published 18 APRIL 2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics 852. I.S. EN 14154-2:2005+A2:2011 Date published 18 APRIL 2011 Water meters - Part 2: Installation and conditions of use 853. I.S. EN 12829:2011 Date published 18 APRIL 2011 Surface active agents - Preparation of water with known calcium and magnesium hardness 854. S.R. CEN TR 16151:2011 Date published 18 APRIL 2011 Water quality - Guidance on the design of Multimetric Indices 855. S.R. CEN TS 16187:2011 Date published 18 APRIL 2011 Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after precolumn derivatization

Date: 18/07/2018 Page 68 856. I.S. EN 13001-2:2011 Date published 18 APRIL 2011 Crane safety - General design - Part 2: Load actions 857. I.S. EN 14154-3:2005+A2:2011 Date published 18 APRIL 2011 Water meters - Part 3: Test methods and equipment 858. I.S. EN 50399:2011 Date published 29 APRIL 2011 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results 859. I.S. EN 61029-2-12:2011 Date published 29 APRIL 2011 Safety of transportable motor-operated electric tools -- Part 2-12: Particular requirements for threading machines (IEC 61029-2-12:2010 (MOD)) 860. I.S. EN 60099-8:2011 Date published 29 APRIL 2011 Surge arresters -- Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV (IEC 60099 -8:2011 (EQV)) 861. I.S. EN 61169-41:2011 Date published 29 APRIL 2011 Radio-frequency connectors -- Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors (IEC 61169-41:2011 (EQV)) 862. I.S. EN 60191-6-17:2011 Date published 29 APRIL 2011 Mechanical standardization of semiconductor devices -- Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball grid array and fine-pitch land grid array (P-PFBGA and P-PFLGA) (IEC 60191-6-17:2011 (EQV)) 863. I.S. EN 60086-5:2011 Date published 29 APRIL 2011 Primary batteries -- Part 5: Safety of batteries with aqueous electrolyte (IEC 60086 -5:2011 (EQV)) 864. I.S. EN 60704-2-13:2011 Date published 29 APRIL 2011 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise -- Part 2-13: Particular requirements for range hoods (IEC 60704-2 -13:2011 (EQV)) 865. I.S. EN 50518-2:2010/AC:2011 Date published 29 APRIL 2011 Monitoring and alarm receiving centre -- Part 2: Technical requirements 866. I.S. EN ISO 28721-1:2011 Date published 27 APRIL 2011 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2008) 867. I.S. EN ISO 28721-3:2011 Date published 27 APRIL 2011 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance (ISO 28721-3:2008)

Date: 18/07/2018 Page 69 868. I.S. EN ISO 10927:2011 Date published 5 MAY 2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011) 869. I.S. EN ISO 28721-2:2011 Date published 27 APRIL 2011 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2008) 870. I.S. EN ISO 29601:2011 Date published 5 MAY 2011 Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) 871. I.S. EN ISO 20884:2011 Date published 5 MAY 2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength- dispersive X-ray fluorescence spectrometry (ISO 20884:2011) 872. I.S. EN 16024:2011 Date published 27 APRIL 2011 Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) 873. I.S. EN ISO 80601-2-12:2011 Date published 5 MAY 2011 Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators (ISO/IEC 80601-2-12:2011) 874. I.S. EN ISO 9908:1997/A1:2011 Date published 5 MAY 2011 Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011) 875. I.S. EN ISO 9905:1998/A1:2011 Date published 5 MAY 2011 Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011) 876. I.S. EN 1591-1:2001+A1:2009/AC:2011 Date published 27 APRIL 2011 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method 877. I.S. EN 60679-6:2011 Date published 9 MAY 2011 Quartz crystal controlled oscillators of assessed quality -- Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines (IEC 60679-6:2011 (EQV)) 878. I.S. EN 50065-1:2011 Date published 9 MAY 2011 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 1: General requirements, frequency bands and electromagnetic disturbances

Date: 18/07/2018 Page 70 879. I.S. EN 60512-26-100:2008/A1:2011 Date published 9 MAY 2011 Connectors for electronic equipment - Tests and measurements -- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26 -100:2008/A1:2011 (EQV)) 880. I.S. EN 60519-6:2011 Date published 9 MAY 2011 Safety in electroheat installations -- Part 6: Specifications for safety in industrial microwave heating equipment (IEC 60519-6:2011 (EQV)) 881. I.S. EN 60904-5:2011 Date published 9 MAY 2011 Photovoltaic devices -- Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method (IEC 60904-5:2011 (EQV)) 882. I.S. EN ISO 4017:2011 Date published 4 MAY 2011 Hexagon head screws - Product grades A and B (ISO 4017:2011) 883. I.S. EN 12808-4:2009/AC:2011/LS:2011 Date published 27 APRIL 2011 Grouts for tiles - Part 4: Determination of shrinkage 884. I.S. EN ISO 4018:2011 Date published 4 MAY 2011 Hexagon head screws - Product grade C (ISO 4018:2011) 885. I.S. EN ISO 8676:2011 Date published 4 MAY 2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) 886. I.S. EN 688:2011 Date published 5 MAY 2011 Resilient floor coverings - Specification for corklinoleum 887. I.S. EN 15269-10:2011 Date published 5 MAY 2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies 888. I.S. EN 1366-10:2011 Date published 5 MAY 2011 Fire resistance tests for service installations - Part 10: Smoke control dampers 889. I.S. EN 15984:2011 Date published 5 MAY 2011 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method 890. I.S. EN 1243:2011 Date published 5 MAY 2011 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates 891. I.S. EN 413-1:2011 Date published 5 MAY 2011 Masonry cement - Part 1: Composition, specifications and conformity criteria

Date: 18/07/2018 Page 71 892. I.S. EN ISO 19334:2011 Date published 5 MAY 2011 Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis (ISO 19334:2010) 893. I.S. EN ISO/IEC 15426-2:2006/AC:2011 Date published 5 MAY 2011 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2: Two-dimensional symbols - Technical Corrigendum 1 (ISO/IEC 15426-2:2005/Cor 1:2008) 894. I.S. EN 1240:2011 Date published 5 MAY 2011 Adhesives - Determination of hydroxyl value and/or hydroxyl content 895. I.S. EN 653:2011 Date published 5 MAY 2011 Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification 896. I.S. EN 687:2011 Date published 5 MAY 2011 Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing 897. S.R. CEN TS 16115-1:2011 Date published 5 MAY 2011 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses 898. I.S. EN 1245:2011 Date published 5 MAY 2011 Adhesives - Determination of pH 899. I.S. EN 12962:2011 Date published 5 MAY 2011 Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) 900. I.S. EN 1239:2011 Date published 5 MAY 2011 Adhesives - Freeze-thaw stability 901. I.S. EN 14103:2011 Date published 5 MAY 2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents 902. I.S. EN 686:2011 Date published 5 MAY 2011 Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing 903. I.S. EN ISO/IEC 15415:2005/AC:2011 Date published 5 MAY 2011 Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbols - Technical Corrigendum 1 (ISO/IEC 15415:2004/Cor 1:2008) 904. I.S. EN 655:2011 Date published 5 MAY 2011 Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification

Date: 18/07/2018 Page 72 905. I.S. EN 16084:2011 Date published 5 MAY 2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints 906. I.S. EN 15943:2011 Date published 5 MAY 2011 Curriculum Exchange Format (CEF) - Data model 907. I.S. EN 1238:2011 Date published 5 MAY 2011 Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) 908. I.S. EN 654:2011 Date published 5 MAY 2011 Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification 909. I.S. EN ISO 11664-4:2011 Date published 5 MAY 2011 Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008) 910. I.S. EN ISO 11664-2:2011 Date published 5 MAY 2011 Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) 911. I.S. EN ISO 9875:2001/AC:2011 Date published 5 MAY 2011 Ships and marine technology - Marine echo-sounding equipment (ISO 9875:2000/Cor 1:2006) 912. I.S. EN ISO 11664-1:2011 Date published 5 MAY 2011 Colorimetry - Part 1: CIE standard colorimetric observers (ISO 11664-1:2007) 913. I.S. EN ISO 11664-5:2011 Date published 5 MAY 2011 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (ISO 11664-5:2009) 914. SWIFT 8:2011 Date published 29 JULY 2011 Specific requirements for electrical apparatus for the detection of Carbon Monoxide (CO) in domestic premises 915. I.S. EN ISO 15883-6:2011 Date published 5 MAY 2011 Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment (ISO 15883-6:2011) 916. S.R. CEN ISO TS 17575-3:2011 Date published 5 MAY 2011 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) 917. S.R. CEN ISO TS 13140-1:2011 Date published 5 MAY 2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011)

Date: 18/07/2018 Page 73 918. S.R. CEN ISO TS 17575-4:2011 Date published 5 MAY 2011 Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) 919. S.R. CEN ISO TS 13143-1:2011 Date published 5 MAY 2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) 920. I.S. EN ISO 14253-3:2011 Date published 5 MAY 2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) 921. I.S. EN ISO 14253-2:2011 Date published 5 MAY 2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 922. I.S. EN ISO 25139:2011 Date published 5 MAY 2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) 923. I.S. EN 50541-1:2011 Date published 10 MAY 2011 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV -- Part 1: General requirements 924. I.S. EN 61000-4-21:2011 Date published 10 MAY 2011 Electromagnetic compatibility (EMC) -- Part 4-21: Testing and measurement techniques - Reverberation chamber test methods (IEC 61000-4-21:2011 (EQV)) 925. S.R. CLC/TR 60269-5:2011 Date published 10 MAY 2011 Low-voltage fuses -- Part 5: Guidance for the application of low-voltage fuses (IEC/TR 60269-5:2010 (EQV)) 926. I.S. EN ISO 21003-2:2008/A1:2011 Date published 5 MAY 2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011) 927. I.S. EN ISO 28927-10:2011 Date published 5 MAY 2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) 928. I.S. EN 13353:2008+A1:2011 Date published 12 MAY 2011 Solid wood panels (SWP) - Requirements 929. I.S. EN 15185:2011 Date published 12 MAY 2011 Furniture - Assessment of the surface resistance to abrasion

Date: 18/07/2018 Page 74 930. I.S. EN 771-1:2011 Date published 12 MAY 2011 Specification for masonry units - Part 1: Clay masonry units 931. I.S. EN 771-3:2011 Date published 12 MAY 2011 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) 932. I.S. EN ISO 11298-1:2011 Date published 11 MAY 2011 Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2010) 933. S.R. CEN ISO/TR 22411:2011 Date published 11 MAY 2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) 934. I.S. EN 4604-009:2011 Date published 11 MAY 2011 Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN) - Product standard 935. S.R. CEN/TS 15213-6:2011 Date published 12 MAY 2011 Road transport and traffic telematics - After-theft services for the recovery of stolen vehicles - Part 6: Test procedures 936. I.S. EN 13121-3:2008+A1:2010/AC:2011 Date published 12 MAY 2011 GRP tanks and vessels for use above ground - Part 3: Design and workmanship 937. S.R. CEN/TS 16137:2011 Date published 11 MAY 2011 Plastics - Determination of bio-based carbon content 938. I.S. EN ISO 11296-1:2011 Date published 11 MAY 2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2009) 939. I.S. EN 14105:2011 Date published 11 MAY 2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents 940. S.R. CEN/TS 15531-4:2011 Date published 12 MAY 2011 Public transport - Service interface for real-time information relating to public transport operations - Part 4: Functional service interfaces: Facility Monitoring 941. I.S. EN 3280:2011 Date published 12 MAY 2011 Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification 942. I.S. EN 1965-1:2011 Date published 12 MAY 2011 Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate

Date: 18/07/2018 Page 75 943. I.S. EN 772-1:2011 Date published 12 MAY 2011 Methods of test for masonry units - Part 1: Determination of compressive strength 944. I.S. EN 772-16:2011 Date published 12 MAY 2011 Methods of test for masonry units - Part 16: Determination of dimensions 945. I.S. EN ISO 5667-13:2011 Date published 12 MAY 2011 Water quality - Sampling - Part 13: Guidance on sampling of sludges (ISO 5667 -13:2011) 946. I.S. EN ISO 8394-2:2010/AC:2011 Date published 12 MAY 2011 Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010) 947. I.S. EN 12101-7:2011 Date published 12 MAY 2011 Smoke and heat control systems - Part 7: Smoke duct sections 948. I.S. EN 12101-8:2011 Date published 12 MAY 2011 Smoke and heat control systems - Part 8: Smoke control dampers 949. I.S. EN 4160:2011 Date published 12 MAY 2011 Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure 950. I.S. EN 771-4:2011 Date published 12 MAY 2011 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units 951. I.S. EN 13420:2011 Date published 11 MAY 2011 Windows - Behaviour between different climates - Test method 952. S.R. CEN ISO/TR 9241-100:2011 Date published 11 MAY 2011 Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics (ISO/TR 9241-100:2010) 953. I.S. EN 771-2:2011 Date published 12 MAY 2011 Specification for masonry units - Part 2: Calcium silicate masonry units 954. I.S. EN 4604-010:2011 Date published 11 MAY 2011 Aerospace series - Cable, electrical, for signal transmission - Part 010: Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD) - Product standard 955. I.S. EN 1846-1:2011 Date published 11 MAY 2011 Firefighting and rescue service vehicles - Nomenclature and designation 956. I.S. EN 772-21:2011 Date published 12 MAY 2011 Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption

Date: 18/07/2018 Page 76 957. I.S. EN 4660-005:2011 Date published 12 MAY 2011 Aerospace series - Modular and Open Avionics Architectures - Part 005: Software 958. I.S. EN 771-5:2011 Date published 12 MAY 2011 Specification for masonry units - Part 5: Manufactured stone masonry units 959. I.S. EN 4641-301:2011 Date published 12 MAY 2011 Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard 960. I.S. EN 772-11:2011 Date published 12 MAY 2011 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of 961. I.S. EN ISO 11298-3:2011 Date published 11 MAY 2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) 962. I.S. EN ISO 8362-6:2011 Date published 11 MAY 2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) 963. I.S. EN 4476:2011 Date published 12 MAY 2011 Aerospace series - Paints and varnishes - Cold curing intermediate coat 964. I.S. EN 15976:2011 Date published 11 MAY 2011 Flexible sheets for waterproofing - Determination of emissivity 965. I.S. EN 15981:2011 Date published 12 MAY 2011 European Learner Mobility - Achievement information (EuroLMAI) 966. I.S. EN ISO 2702:2011 Date published 12 MAY 2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) 967. I.S. EN ISO 5364:2011 Date published 11 MAY 2011 Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2008) 968. I.S. EN ISO 11296-4:2011 Date published 11 MAY 2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2009, corrected version 2010-06-01) 969. S.R. CEN ISO/TR 7250-2:2011 Date published 11 MAY 2011 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations (ISO/TR 7250 -2:2010)

Date: 18/07/2018 Page 77 970. I.S. EN 320:2011 Date published 11 MAY 2011 Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws 971. I.S. EN ISO 21671:2006/A1:2011 Date published 12 MAY 2011 Dentistry - Rotary polishers - Amendment 1 (ISO 21671:2006/Amd 1:2011) 972. I.S. EN 14894:2011 Date published 12 MAY 2011 LPG equipment and accessories - Cylinder and drum marking 973. I.S. EN 4165-024:2011 Date published 11 MAY 2011 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 024: Single module plug - Product standard 974. I.S. EN 4165-026:2011 Date published 11 MAY 2011 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 026: Accessories for single modules - Product standard 975. I.S. EN 772-18:2011 Date published 12 MAY 2011 Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units 976. I.S. EN 2825:2011 Date published 11 MAY 2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density 977. I.S. EN 13683:2003+A2:2011/LC:2011 Date published 5 MAY 2011 Garden equipment - Integrally powered shredders/chippers - Safety 978. I.S. EN ISO 11363-1:2010/AC:2011 Date published 5 MAY 2011 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Technical Corrigendum 1 (ISO 11363-1:2010/Cor 1:2011) 979. I.S. EN 50525-1:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 1: General requirements 980. I.S. EN 50525-2-11:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (Uo/U) -- Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation 981. I.S. EN 50525-2-12:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (Uo/U) -- Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads

Date: 18/07/2018 Page 78 982. I.S. EN 50525-2-21:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (Uo/U) -- Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation 983. I.S. EN 50525-2-22:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation 984. I.S. EN 50525-2-31:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-31: Cables for general applications - Single core non- sheathed cables with thermoplastic PVC insulation 985. I.S. EN 50525-2-41:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation 986. I.S. EN 50525-2-42:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-42: Cables for general applications - Single core non- sheathed cables with crosslinked EVA insulation 987. I.S. EN 50525-2-51:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation 988. I.S. EN 50525-2-71:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation 989. I.S. EN 50525-2-72:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation 990. I.S. EN 50525-2-81:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding 991. I.S. EN 50525-2-82:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains

Date: 18/07/2018 Page 79 992. I.S. EN 50525-2-83:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation 993. I.S. EN 50525-3-11:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke 994. I.S. EN 50525-3-21:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke 995. I.S. EN 50525-3-31:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 3-31: Cables with special fire performance - Single core non- sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke 996. I.S. EN 50525-3-41:2011 Date published 18 MAY 2011 Electric cables - Low voltage energy cables of rated voltages up to and including

450/750 V (U0/U) -- Part 3-41: Cables with special fire performance - Single core non- sheathed cables with halogen-free crosslinked insulation, and low emission of smoke 997. I.S. EN 62571:2011 Date published 18 MAY 2011 Digital audiobook file format and player requirements (IEC 62571:2011 (EQV)) 998. I.S. EN 62047-8:2011 Date published 18 MAY 2011 Semiconductor devices - Micro-electromechanical devices -- Part 8: Strip bending test method for tensile property measurement of thin films (IEC 62047-8:2011 (EQV)) 999. I.S. EN 60269-6:2011 Date published 18 MAY 2011 Low-voltage fuses -- Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems (IEC 60269-6:2010 (EQV) + corrigendum Dec. 2010 (EQV)) 1000. I.S. EN 60793-2-10:2011 Date published 18 MAY 2011 Optical fibres -- Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (IEC 60793-2-10:2011 (EQV)) 1001. I.S. EN 62637-1:2011 Date published 18 MAY 2011 Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface (IEC 62637-1:2011 (EQV)) 1002. I.S. EN 62637-2:2011 Date published 18 MAY 2011 Battery charging interface for small handheld multimedia devices -- Part 2: 2 mm barrel type interface conformance testing (IEC 62637-2:2011 (EQV))

Date: 18/07/2018 Page 80 1003. I.S. EN 60825-4:2006/A2:2011 Date published 18 MAY 2011 Safety of laser products -- Part 4: Laser guards (IEC 60825-4:2006/A2:2011 (EQV)) 1004. I.S. EN 50174-2:2009/A1:2011/AC:2011 Date published 18 MAY 2011 Information technology - Cabling installation -- Part 2: Installation planning and practices inside buildings 1005. I.S. EN 1965-2:2011 Date published 23 MAY 2011 Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate 1006. I.S. EN ISO 1825:2011 Date published 23 MAY 2011 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2010) 1007. I.S. EN 14869-2:2011 Date published 23 MAY 2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) 1008. I.S. EN ISO 3994:2011 Date published 23 MAY 2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007) 1009. I.S. EN 15595:2009+A1:2011 Date published 23 MAY 2011 Railway applications - Braking - Wheel slide protection 1010. I.S. EN 1628:2011 Date published 23 MAY 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading 1011. I.S. EN ISO 11296-3:2011 Date published 23 MAY 2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2009/Cor 1:2011) 1012. I.S. EN 1555-4:2011 Date published 23 MAY 2011 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves 1013. I.S. EN 1627:2011 Date published 23 MAY 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification 1014. I.S. EN ISO 8331:2011 Date published 23 MAY 2011 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2007) 1015. I.S. EN 15220-1:2008+A1:2011 Date published 23 MAY 2011 Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators

Date: 18/07/2018 Page 81 1016. I.S. EN 14535-1:2005+A1:2011 Date published 23 MAY 2011 Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements 1017. I.S. EN 1629:2011 Date published 23 MAY 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading 1018. I.S. EN 1630:2011 Date published 23 MAY 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts 1019. I.S. EN 14869-1:2011 Date published 23 MAY 2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) 1020. S.R. CWA 16275:2011/LC:2011 Date published 5 MAY 2011 Guidelines for the selection of consultants advising SMEs on integrated quality, environment, health and safety management systems 1021. I.S. EN 50377-7-4:2011 Date published 19 MAY 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 7-4: LC-PC simplex terminated on IEC 60793-2 -50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C 1022. I.S. EN 61300-2-5:2011 Date published 19 MAY 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-5: Tests - Torsion (IEC 61300-2-5:2009 (EQV)) 1023. I.S. EN 61169-39:2011 Date published 19 MAY 2011 Radio-frequency connectors -- Part 39: Sectional specification for CQM series quick lock RF connectors (IEC 61169-39:2009 (EQV)) 1024. I.S. EN 50564:2011 Date published 19 MAY 2011 Electrical and electronic household and office equipment - Measurement of low power consumption (IEC 62301:2011 (MOD)) 1025. I.S. EN 61300-1:2011 Date published 19 MAY 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 1: General and guidance (IEC 61300-1:2011 (EQV)) 1026. I.S. EN 61169-40:2011 Date published 19 MAY 2011 Radio-frequency connectors -- Part 40: Sectional specification for 2.4 series RF connectors (IEC 61169-40:2010 (EQV)) 1027. I.S. EN 62343-2:2011 Date published 19 MAY 2011 Dynamic modules -- Part 2: Reliability qualification (IEC 62343-2:2011 (EQV))

Date: 18/07/2018 Page 82 1028. I.S. EN 50173-2:2007/A1:2010/AC:2011 Date published 19 MAY 2011 Information technology - Generic cabling systems -- Part 2: Office premises 1029. I.S. EN 50173-3:2007/A1:2010/AC:2011 Date published 19 MAY 2011 Information technology - Generic cabling systems -- Part 3: Industrial premises 1030. I.S. EN 50173-5:2007/A1:2010/AC:2011 Date published 19 MAY 2011 Information technology - Generic cabling systems -- Part 3: Industrial premises 1031. I.S. EN 50173-4:2007/A1:2010/AC:2011 Date published 19 MAY 2011 Information technology - Generic cabling systems -- Part 4: Homes 1032. I.S. EN 13228:2011 Date published 30 MAY 2011 Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system 1033. I.S. EN ISO 28706-4:2011 Date published 30 MAY 2011 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2008) 1034. I.S. EN ISO 28706-1:2011 Date published 30 MAY 2011 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008) 1035. I.S. EN 15895:2011 Date published 30 MAY 2011 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools 1036. I.S. EN ISO 28706-2:2011 Date published 30 MAY 2011 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:2008) 1037. I.S. EN ISO 19119:2006/A1:2011 Date published 30 MAY 2011 Geographic information - Services - Amendment 1: Extensions of the service metadata model (ISO 19119:2005/AMD 1:2008) 1038. I.S. EN 3475-603:2011 Date published 30 MAY 2011 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking 1039. I.S. EN 13508-2:2003+A1:2011 Date published 30 MAY 2011 Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system 1040. I.S. EN 527-1:2011 Date published 30 MAY 2011 Office furniture - Work tables and desks - Part 1: Dimensions

Date: 18/07/2018 Page 83 1041. S.R. CWA 16308:2011 Date published 30 MAY 2011 Framework for consumer rental conditions 1042. I.S. EN 13647:2011 Date published 30 MAY 2011 Wood flooring and wood panelling and cladding - Determination of geometrical characteristics 1043. I.S. EN ISO 28706-3:2011 Date published 30 MAY 2011 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008) 1044. I.S. EN 2997-015:2011 Date published 30 MAY 2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire- resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 015: Jam-nut mounted receptacle with i 1045. I.S. EN 2997-001:2011 Date published 30 MAY 2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire- resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 001: Technical specification 1046. I.S. EN 13976-1:2011 Date published 30 MAY 2011 Rescue systems - Transportation of incubators - Part 1: Interface conditions 1047. I.S. EN 13976-2:2011 Date published 30 MAY 2011 Rescue systems - Transportation of incubators - Part 2: System requirements 1048. I.S. EN 12705:2011 Date published 30 MAY 2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration 1049. I.S. EN 2757:2011 Date published 30 MAY 2011 Aerospace series - Structural adhesives system - Test method - Determination of the drying and ignition residues of primers 1050. SWIFT 3000:2010/A1:2011 Date published 23 MAY 2011 Code of Practice for Corporate Governance Assessment in Ireland 1051. I.S. EN 50536:2011 Date published 26 MAY 2011 Protection against lightning - Thunderstorm warning systems 1052. I.S. EN 60534-2-1:2011 Date published 26 MAY 2011 Industrial-process control valves -- Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:2011 (EQV)) 1053. I.S. EN ISO 10773:2011 Date published 23 MAY 2011 Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011)

Date: 18/07/2018 Page 84 1054. I.S. EN ISO 15792-3:2011 Date published 30 MAY 2011 Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (ISO 15792 -3:2011) 1055. S.R. CEN ISO/TS 13143-2:2011 Date published 30 MAY 2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 2: Abstract test suite (ISO/TS 13143-2:2011) 1056. I.S. EN ISO 3759:2011 Date published 30 MAY 2011 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011) 1057. I.S. EN ISO 17226-3:2011 Date published 30 MAY 2011 Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather (ISO 17226-3:2011) 1058. I.S. EN ISO 11979-8:2009/A1:2011 Date published 30 MAY 2011 Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements - Amendment 1 (ISO 11979-8:2006/Amd 1:2011) 1059. I.S. EN ISO 6947:2011 Date published 30 MAY 2011 Welding and allied processes - Welding positions (ISO 6947:2011) 1060. I.S. EN ISO 6721-1:2011 Date published 30 MAY 2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011) 1061. I.S. EN ISO 7751:1997/A1:2011 Date published 30 MAY 2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working pressure" throughout text (ISO 7751:1991/A 1062. I.S. EN ISO 13212:2011 Date published 30 MAY 2011 Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf- life (ISO 13212:2011) 1063. NA+AC1;2011 to I.S. EN 1991-1-7:2006 Date published 26 MAY 2011 National Annex to Eurocode 1 - Actions on structures - Part 1-7: General actions Accidental actions 1064. I.S. EN 15980:2011 Date published 31 MAY 2011 Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene 1065. I.S. EN 15987:2011 Date published 31 MAY 2011 Leather - Terminology - Key definitions for the leather trade

Date: 18/07/2018 Page 85 1066. S.R. CEN/TR 16130:2011 Date published 31 MAY 2011 Characterization of waste - On-site verification 1067. I.S. EN 50527-2-1:2011 Date published 3 JUNE 2011 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices -- Part 2-1: Specific assessment for workers with cardiac pacemakers 1068. I.S. EN 50173-1:2011 Date published 3 JUNE 2011 Information technology - Generic cabling systems -- Part 1: General requirements 1069. I.S. EN 61753-141-2:2011 Date published 3 JUNE 2011 Fibre optic interconnecting devices and passive components - Performance standard -- Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments (IEC 61753-141 -2:2011 (EQV)) 1070. I.S. EN 62574:2011 Date published 3 JUNE 2011 Audio, video and multimedia systems - General channel assignment of multichannel audio (IEC 62574:2011 (EQV)) 1071. I.S. EN 12167:2011 Date published 9 JUNE 2011 Copper and copper alloys - Profiles and bars for general purposes 1072. I.S. EN 12168:2011 Date published 9 JUNE 2011 Copper and copper alloys - Hollow rod for free machining purposes 1073. S.R. CEN/TS 16199:2011 Date published 9 JUNE 2011 Fertilizers - Determination of the sodium extracted by flame-emission spectrometry 1074. I.S. EN 12163:2011 Date published 9 JUNE 2011 Copper and copper alloys - Rod for general purposes 1075. I.S. EN 12166:2011 Date published 9 JUNE 2011 Copper and copper alloys - Wire for general purposes 1076. I.S. EN ISO 10769:2011 Date published 9 JUNE 2011 Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011) 1077. I.S. EN ISO 10360-7:2011 Date published 9 JUNE 2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) 1078. S.R. CEN/TS 16196:2011 Date published 9 JUNE 2011 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate

Date: 18/07/2018 Page 86 1079. I.S. EN ISO 8015:2011 Date published 9 JUNE 2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) 1080. I.S. EN ISO 23908:2011 Date published 9 JUNE 2011 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling (ISO 23908:2011) 1081. S.R. CEN/TS 16197:2011 Date published 9 JUNE 2011 Fertilizers - Determination of magnesium by atomic absorption spectrometry 1082. I.S. EN ISO 4641:2011 Date published 9 JUNE 2011 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2010) 1083. S.R. CEN/TS 16195:2011 Date published 9 JUNE 2011 Fertilizers - Determination of chlorides in the absence of organic material 1084. S.R. CEN/TS 16198:2011 Date published 9 JUNE 2011 Fertilizers - Determination of magnesium by complexometry 1085. I.S. EN 12464-1:2011 Date published 9 JUNE 2011 Light and lighting - Lighting of work places - Part 1: Indoor work places 1086. I.S. EN ISO 1518-1:2011 Date published 9 JUNE 2011 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) 1087. I.S. EN ISO 7439:2011 Date published 9 JUNE 2011 Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2011) 1088. I.S. EN 12165:2011 Date published 9 JUNE 2011 Copper and copper alloys - Wrought and unwrought forging stock 1089. I.S. EN ISO 22413:2011 Date published 9 JUNE 2011 Transfer sets for pharmaceutical preparations - Requirements and test methods (ISO 22413:2010) 1090. I.S. EN 12164:2011 Date published 9 JUNE 2011 Copper and copper alloys - Rod for free machining purposes 1091. I.S. EN 61029-2-3:2011 Date published 15 JUNE 2011 Safety of transportable motor-operated electric tools -- Part 2-3: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993 (MOD) + A1:2001 (EQV))

Date: 18/07/2018 Page 87 1092. I.S. EN 60745-2-22:2011 Date published 15 JUNE 2011 Hand-held motor-operated electric tools - Safety -- Part 2-22: Particular requirements for cut-off machines (IEC 60745-2-22:2011 (MOD)) 1093. I.S. EN 140401-804:2011 Date published 15 JUNE 2011 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 1094. I.S. EN 61000-4-15:2011 Date published 15 JUNE 2011 Electromagnetic compatibility (EMC) -- Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications (IEC 61000-4-15:2010 (EQV)) 1095. I.S. EN 50548:2011 Date published 15 JUNE 2011 Junction boxes for photovoltaic modules 1096. I.S. EN 61850-4:2011 Date published 15 JUNE 2011 Communication networks and systems for power utility automation -- Part 4: System and project management (IEC 61850-4:2011 (EQV)) 1097. I.S. EN 60512-8-2:2011 Date published 15 JUNE 2011 Connectors for electronic equipment - Tests and measurements -- Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial (IEC 60512-8-2:2011 (EQV)) 1098. I.S. EN 60512-8-3:2011 Date published 15 JUNE 2011 Connectors for electronic equipment - Tests and measurements -- Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2011 (EQV)) 1099. I.S. EN 60512-9-4:2011 Date published 15 JUNE 2011 Connectors for electronic equipment - Tests and measurements -- Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) (IEC 60512-9-4:2011 (EQV)) 1100. I.S. EN 60512-17-2:2011 Date published 15 JUNE 2011 Connectors for electronic equipment - Tests and measurements -- Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (IEC 60512-17 -2:2011 (EQV)) 1101. I.S. EN 62040-3:2011 Date published 15 JUNE 2011 Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance and test requirements (IEC 62040-3:2011 (EQV)) 1102. I.S. EN 60728-6:2011 Date published 15 JUNE 2011 Cable networks for television signals, sound signals and interactive services -- Part 6: Optical equipment (IEC 60728-6:2011 (EQV)) 1103. I.S. EN 61954:2011 Date published 15 JUNE 2011 Static VAR compensators (SVC) - Testing of thyristor valves (IEC 61954:2011 (EQV))

Date: 18/07/2018 Page 88 1104. I.S. EN 60603-7-1:2011 Date published 15 JUNE 2011 Connectors for electronic equipment -- Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors (IEC 60603-7-1:2011 (EQV)) 1105. I.S. EN 61937-10:2011 Date published 15 JUNE 2011 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 10: Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format (IEC 61937-10:2011 (EQV)) 1106. I.S. EN 50377-14-1:2011 Date published 15 JUNE 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C 1107. I.S. EN 50122-1:2011/A1:2011 Date published 15 JUNE 2011 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 1: Protective provisions against electric shock 1108. I.S. EN 60127-1:2006/A1:2011 Date published 15 JUNE 2011 Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:2006/A1:2011 (EQV)) 1109. I.S. EN 50536:2011/AC:2011 Date published 15 JUNE 2011 Protection against lightning - Thunderstorm warning systems 1110. I.S. EN 13212:2011 Date published 20 JUNE 2011 Road marking materials - Requirements for factory production control 1111. I.S. EN 15921:2011 Date published 20 JUNE 2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at 65 °C 1112. I.S. EN ISO 16212:2011 Date published 20 JUNE 2011 Cosmetics - Microbiology - Enumeration of yeast and mould (ISO 16212:2008) 1113. I.S. EN 15920:2011 Date published 20 JUNE 2011 Fertilizers - Extraction of phosphorus soluble in 2 % citric acid 1114. I.S. EN 1824:2011 Date published 20 JUNE 2011 Road marking materials - Road trials 1115. I.S. EN 71-1:2011 Date published 20 JUNE 2011 Safety of toys - Part 1: Mechanical and physical properties 1116. I.S. EN 15919:2011 Date published 20 JUNE 2011 Fertilizers - Extraction of phosphorus soluble in 2 % formic acid 1117. I.S. EN 15922:2011 Date published 20 JUNE 2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature

Date: 18/07/2018 Page 89 1118. I.S. EN 13197:2011 Date published 20 JUNE 2011 Road marking materials - Wear simulator Turntable 1119. I.S. EN 459-3:2011 Date published 20 JUNE 2011 Building lime - Part 3: Conformity evaluation 1120. I.S. EN 15923:2011 Date published 20 JUNE 2011 Fertilizers - Extraction of phosphorus soluble in Joulie's alcaline ammonium citrate 1121. I.S. EN ISO 18415:2011 Date published 20 JUNE 2011 Cosmetics - Microbiology - Detection of specified and non-specified microorganisms (ISO 18415:2007) 1122. I.S. EN 13459:2011 Date published 20 JUNE 2011 Road marking materials - Sampling from storage and testing 1123. I.S. EN 12802:2011 Date published 20 JUNE 2011 Road marking materials - Laboratory methods for identification 1124. I.S. EN 14961-2:2011 Date published 27 JUNE 2011 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use 1125. I.S. EN 674:2011 Date published 27 JUNE 2011 Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method 1126. I.S. EN 15722:2011 Date published 27 JUNE 2011 Intelligent transport systems - eSafety - eCall minimum set of data (MSD) 1127. I.S. EN 14961-4:2011 Date published 27 JUNE 2011 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use 1128. I.S. EN ISO 294-4:2003/AC:2011 Date published 27 JUNE 2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage - Technical Corrigendum 1 (ISO 294-4:2001/Cor 1:2007) 1129. I.S. EN ISO 10414-2:2011 Date published 27 JUNE 2011 Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011) 1130. I.S. EN ISO 376:2011 Date published 27 JUNE 2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011) 1131. I.S. EN 131-1:2007+A1:2011 Date published 27 JUNE 2011 Ladders - Part 1: Terms, types, functional sizes

Date: 18/07/2018 Page 90 1132. I.S. EN 13523-11:2011 Date published 27 JUNE 2011 Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) 1133. I.S. EN ISO 13501:2011 Date published 27 JUNE 2011 Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011) 1134. I.S. EN 2240-062:2011 Date published 27 JUNE 2011 Aerospace series - Lamps, incandescent - Part 062: Lamp, code 1810 - Product standard 1135. I.S. EN 16074:2011 Date published 27 JUNE 2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials 1136. I.S. EN 14778:2011 Date published 27 JUNE 2011 Solid biofuels - Sampling 1137. I.S. EN 14961-3:2011 Date published 27 JUNE 2011 Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non- industrial use 1138. I.S. EN ISO 13628-4:2010/AC:2011 Date published 27 JUNE 2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment - Technical Corrigendum 1 (ISO 13628-4:2010/Cor 1:2011) 1139. I.S. EN 2240-063:2011 Date published 27 JUNE 2011 Aerospace series - Lamps, incandescent - Part 063: Lamp, code 1815 - Product standard 1140. I.S. EN 2240-064:2011 Date published 27 JUNE 2011 Aerospace series - Lamps, incandescent - Part 064: Lamp, code 1819 - Product standard 1141. I.S. EN 675:2011 Date published 27 JUNE 2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method 1142. I.S. EN 2240-061:2011 Date published 27 JUNE 2011 Aerospace series - Lamps, incandescent - Part 061: Lamp, code 1683 - Product standard 1143. I.S. EN 12369-2:2011 Date published 27 JUNE 2011 Wood-based panels - Characteristic values for structural design - Part 2: Plywood 1144. I.S. EN 14535-2:2011 Date published 27 JUNE 2011 Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements

Date: 18/07/2018 Page 91 1145. I.S. EN 2240-065:2011 Date published 27 JUNE 2011 Aerospace series - Lamps, incandescent - Part 065: Lamp, code 1820 - Product standard 1146. I.S. EN ISO 17076-2:2011 Date published 27 JUNE 2011 Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method (ISO 17076-2:2011) 1147. I.S. EN 14780:2011 Date published 27 JUNE 2011 Solid biofuels - Sample preparation 1148. S.R. CEN/TR 16184:2011 Date published 27 JUNE 2011 Characterization of Waste - State-of-the-art document - Analysis of eluates 1149. I.S. EN 13523-19:2011 Date published 27 JUNE 2011 Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing 1150. NA/AC1;2011 to I.S. EN 1991-2:2003 Date published 25 JUNE 2011 National Annex to Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges 1151. I.S. EN 50128:2011 Date published 22 JUNE 2011 Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems 1152. I.S. EN 50411-6-1:2011 Date published 22 JUNE 2011 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 6-1: Unprotected microduct for category S and A 1153. I.S. EN 60793-1-44:2011 Date published 22 JUNE 2011 Optical fibres -- Part 1-44: Measurement methods and test procedures - Cut-off wavelength (IEC 60793-1-44:2011 (EQV)) 1154. I.S. EN 50130-5:2011 Date published 22 JUNE 2011 Alarm systems -- Part 5: Environmental test methods 1155. I.S. EN 62631-1:2011 Date published 22 JUNE 2011 Dielectric and resistive properties of solid insulating materials -- Part 1: General (IEC 62631-1:2011 (EQV)) 1156. I.S. EN 50130-4:2011 Date published 22 JUNE 2011 Alarm systems -- Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems 1157. I.S. 441:2011 Date published 24 JUNE 2011 Quality requirements for a compost manufactured from source segregated, separately collected, biodegradable materials

Date: 18/07/2018 Page 92 1158. I.S. EN 62363:2011 Date published 1 JULY 2011 Radiation protection instrumentation - Portable photon contamination meters and monitors (IEC 62363:2008 (MOD)) 1159. I.S. EN 61300-3-45:2011 Date published 1 JULY 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors (IEC 61300-3-45:2011 (EQV)) 1160. I.S. EN ISO 14254:2011 Date published 28 JUNE 2011 Soil quality - Determination of exchangeable acidity in barium chloride extracts (ISO 14254:2001) 1161. I.S. EN ISO 16133:2011 Date published 28 JUNE 2011 Soil quality - Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2004) 1162. I.S. EN ISO 16703:2011 Date published 28 JUNE 2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004) 1163. I.S. EN ISO 25424:2011 Date published 28 JUNE 2011 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) 1164. I.S. EN 2240-066:2011 Date published 28 JUNE 2011 Aerospace series - Lamps, incandescent - Part 066: Lamp, code 1829 - Product standard 1165. I.S. EN 2240-069:2011 Date published 28 JUNE 2011 Aerospace series - Lamps, incandescent - Part 069: Lamp, code 1978 - Product standard 1166. S.R. CEN/TS 16209:2011 Date published 28 JUNE 2011 Furniture - Classification for properties for furniture surfaces 1167. I.S. EN ISO 16072:2011 Date published 28 JUNE 2011 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002) 1168. I.S. EN ISO 17402:2011 Date published 28 JUNE 2011 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials (ISO 17402:2008) 1169. I.S. EN 480-1:2006+A1:2011 Date published 28 JUNE 2011 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing

Date: 18/07/2018 Page 93 1170. I.S. EN ISO 15952:2011 Date published 28 JUNE 2011 Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2006) 1171. S.R. CEN/TS 14972:2011 Date published 28 JUNE 2011 Fixed firefighting systems - Watermist systems - Design and installation 1172. I.S. EN ISO 11960:2011 Date published 28 JUNE 2011 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2011) 1173. I.S. EN ISO 11260:2011 Date published 28 JUNE 2011 Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:1994/Cor 1:1996) 1174. I.S. EN 1300:2004+A1:2011 Date published 28 JUNE 2011 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening 1175. I.S. EN 341:2011 Date published 28 JUNE 2011 Personal fall protection equipment - Descender devices for rescue 1176. I.S. EN 2240-070:2011 Date published 28 JUNE 2011 Aerospace series - Lamps, incandescent - Part 070: Lamp, code 2232 - Product standard 1177. I.S. EN ISO 14240-1:2011 Date published 28 JUNE 2011 Soil quality - Determination of soil microbial biomass - Part 1: Substrate-induced respiration method (ISO 14240-1:1997) 1178. I.S. EN ISO 15175:2011 Date published 28 JUNE 2011 Soil quality - Characterization of soil related to groundwater protection (ISO 15175:2004) 1179. I.S. EN ISO 19110:2006/A1:2011 Date published 28 JUNE 2011 Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO 19110:2005/AMD 1:2011) 1180. I.S. EN 2240-067:2011 Date published 28 JUNE 2011 Aerospace series - Lamps, incandescent - Part 067: Lamp, code 1843 - Product standard 1181. I.S. EN 480-13:2009+A1:2011 Date published 28 JUNE 2011 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures 1182. I.S. EN 12446:2011 Date published 28 JUNE 2011 Chimneys - Components - Concrete outer wall elements

Date: 18/07/2018 Page 94 1183. I.S. EN 2240-068:2011 Date published 28 JUNE 2011 Aerospace series - Lamps, incandescent - Part 068: Lamp, code 1864 - Product standard 1184. I.S. EN ISO 14240-2:2011 Date published 28 JUNE 2011 Soil quality - Determination of soil microbial biomass - Part 2: Fumigation-extraction method (ISO 14240-2:1997) 1185. I.S. EN 61784-3-18:2011 Date published 4 JULY 2011 Industrial communication networks - Profiles -- Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18 (IEC 61784-3-18:2011 (EQV)) 1186. I.S. EN 12326-2:2011 Date published 5 JULY 2011 Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate 1187. I.S. EN 12561-1:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods 1188. I.S. EN 12561-4:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products 1189. I.S. EN 12561-5:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products 1190. I.S. EN 4685:2011 Date published 5 JULY 2011 Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa 1191. I.S. EN 14870-1:2011 Date published 5 JULY 2011 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) 1192. I.S. EN 10244-1:2009/AC:2011 Date published 5 JULY 2011 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles 1193. I.S. EN 12561-6:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 6: Manholes 1194. I.S. EN ISO 20963:2011 Date published 5 JULY 2011 Soil quality - Effects of pollutants on insect larvae (Oxythyrea funesta) - Determination of acute toxicity (ISO 20963:2005) 1195. I.S. EN ISO 25177:2011 Date published 5 JULY 2011 Soil quality - Field soil description (ISO 25177:2008)

Date: 18/07/2018 Page 95 1196. I.S. EN 2491:2011 Date published 5 JULY 2011 Aerospace series - Molybdenum disulphide dry lubricants - Coating methods 1197. I.S. EN 2535:2011 Date published 5 JULY 2011 Aerospace series - Vacuum deposition of cadmium 1198. S.R. CEN/TS 16229:2011 Date published 5 JULY 2011 Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds 1199. I.S. EN ISO 13408-3:2011 Date published 5 JULY 2011 Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) 1200. I.S. EN ISO 13408-1:2011 Date published 5 JULY 2011 Aseptic processing of health care products - Part 1: General requirements (ISO 13408 -1:2008) 1201. I.S. EN 12561-8:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 8: Heating connections 1202. I.S. EN 1858:2008+A1:2011 Date published 5 JULY 2011 Chimneys - Components - Concrete flue blocks 1203. I.S. EN ISO 22892:2011 Date published 5 JULY 2011 Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry (ISO 22892:2006) 1204. I.S. EN 4675:2011 Date published 5 JULY 2011 Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm 1205. I.S. EN ISO 13408-6:2011 Date published 5 JULY 2011 Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408 -6:2005) 1206. I.S. EN 12561-2:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return 1207. I.S. EN 4683:2011 Date published 5 JULY 2011 Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod 1208. I.S. EN 544:2011 Date published 5 JULY 2011 Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods

Date: 18/07/2018 Page 96 1209. I.S. EN 1264-1:2011 Date published 5 JULY 2011 Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols 1210. I.S. EN ISO 13408-4:2011 Date published 5 JULY 2011 Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) 1211. I.S. EN 12561-7:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 7: Platforms and ladders 1212. I.S. EN ISO 19258:2011 Date published 5 JULY 2011 Soil quality - Guidance on the determination of background values (ISO 19258:2005) 1213. I.S. EN ISO 22030:2011 Date published 5 JULY 2011 Soil quality - Biological methods - Chronic toxicity in higher plants (ISO 22030:2005) 1214. I.S. EN 4593:2011 Date published 5 JULY 2011 Aerospace series - Paints and varnishes - Determination of solar absorptance 1215. I.S. EN 594:2011 Date published 5 JULY 2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels 1216. I.S. EN ISO 13408-5:2011 Date published 5 JULY 2011 Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408 -5:2006) 1217. I.S. EN ISO 13408-2:2011 Date published 5 JULY 2011 Aseptic processing of health care products - Part 2: Filtration (ISO 13408-2:2003) 1218. I.S. EN ISO 23470:2011 Date published 5 JULY 2011 Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution (ISO 23470:2007) 1219. S.R. CEN/TR 13445-9:2011 Date published 5 JULY 2011 Unfired pressure vessels - Part 9: Conformance of the EN 13445 series to ISO 16528 1220. I.S. EN 12665:2011 Date published 5 JULY 2011 Light and lighting - Basic terms and criteria for specifying lighting requirements 1221. I.S. EN 13869:2002+A1:2011 Date published 5 JULY 2011 Lighters - Child-resistance for lighters - Safety requirements and test methods 1222. I.S. EN 12561-3:2011 Date published 5 JULY 2011 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure

Date: 18/07/2018 Page 97 1223. I.S. EN 4672:2011 Date published 5 JULY 2011 Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm 1224. I.S. EN ISO 28927-10:2011/LC:2011-05 Date published 11 JULY 2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) 1225. I.S. EN 13420:2011/LC:2011-05 Date published 11 JULY 2011 Windows - Behaviour between different climates - Test method 1226. I.S. EN ISO 5364:2011/LC:2011-05 Date published 11 JULY 2011 Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2008) 1227. I.S. EN 771-6:2011 Date published 11 JULY 2011 Specification for masonry units - Part 6: Natural stone masonry units 1228. S.R. CEN/TR 16208:2011 Date published 11 JULY 2011 Biobased products - Overview of standards 1229. I.S. EN 60929:2011 Date published 15 NOVEMBER 2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011 (EQV)) 1230. I.S. EN 60456:2011 Date published 13 JULY 2011 Clothes washing machines for household use - Methods for measuring the performance (IEC 60456:2010 (MOD)) 1231. I.S. EN 60749-30:2005/A1:2011 Date published 13 JULY 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing (IEC 60749-30:2005/A1:2011 (EQV)) 1232. I.S. EN 62258-2:2011 Date published 13 JULY 2011 Semiconductor die products -- Part 2: Exchange data formats (IEC 62258-2:2011 (EQV)) 1233. I.S. EN 61837-2:2011 Date published 13 JULY 2011 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections -- Part 2: Ceramic enclosures (IEC 61837-2:2011 (EQV)) 1234. I.S. EN 61347-2-3:2011 Date published 15 NOVEMBER 2011 Lamp control gear -- Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps (IEC 61347-2-3:2011 (EQV))

Date: 18/07/2018 Page 98 1235. I.S. EN 62129-2:2011 Date published 13 JULY 2011 Calibration of wavelength/optical frequency measurement instruments -- Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011 (EQV)) 1236. I.S. EN 60034-16-1:2011 Date published 13 JULY 2011 Rotating electrical machines -- Part 16-1: Excitation systems for synchronous machines - Definitions (IEC 60034-16-1:2011 (EQV)) 1237. I.S. EN ISO/IEC 80079-34:2011 Date published 13 JULY 2011 Explosive atmospheres -- Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011 (MOD)) 1238. I.S. EN ISO 16120-3:2011 Date published 15 JULY 2011 Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) 1239. I.S. EN ISO 16120-4:2011 Date published 15 JULY 2011 Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2011) 1240. I.S. EN ISO 6185-4:2011 Date published 15 JULY 2011 Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011) 1241. I.S. EN ISO 8565:2011 Date published 15 JULY 2011 Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) 1242. I.S. EN ISO 6875:2011 Date published 15 JULY 2011 Dentistry - Patient chair (ISO 6875:2011) 1243. I.S. EN ISO 139:2005/A1:2011 Date published 15 JULY 2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/AMD 1:2011) 1244. I.S. EN ISO 21809-1:2011 Date published 15 JULY 2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) 1245. I.S. EN ISO 16120-2:2011 Date published 15 JULY 2011 Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod (ISO 16120-2:2011) 1246. I.S. EN ISO 10218-2:2011 Date published 15 JULY 2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)

Date: 18/07/2018 Page 99 1247. I.S. EN ISO 16120-1:2011 Date published 15 JULY 2011 Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2011) 1248. I.S. EN ISO 14160:2011 Date published 15 JULY 2011 Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilizati 1249. I.S. EN ISO 10218-1:2011 Date published 15 JULY 2011 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) 1250. I.S. EN ISO 14372:2011 Date published 15 JULY 2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011) 1251. I.S. EN 14161:2011 Date published 15 JULY 2011 Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) 1252. I.S. EN 13053:2006+A1:2011 Date published 15 JULY 2011 Ventilation for buildings - Air handling units - Rating and performance for units, components and sections 1253. I.S. EN 13141-4:2011 Date published 15 JULY 2011 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems 1254. I.S. EN 1717:2000/NA:2011 Date published 14 JULY 2011 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow 1255. I.S. EN 62327:2011 Date published 19 JULY 2011 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation (IEC 62327:2006 (MOD)) 1256. I.S. EN 62244:2011 Date published 19 JULY 2011 Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders (IEC 62244:2006 (MOD)) 1257. I.S. EN 60893-3-2:2004/A1:2011 Date published 19 JULY 2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003/A1:2011 (EQV))

Date: 18/07/2018 Page 1258. I.S. EN 61951-2:2011 Date published 19 JULY 2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells -- Part 2: Nickel-metal hydride (IEC 61951 -2:2011 (EQV)) 1259. I.S. EN 61534-1:2011 Date published 19 JULY 2011 Powertrack systems -- Part 1: General requirements (IEC 61534-1:2011 (EQV)) 1260. I.S. EN 60212:2011 Date published 19 JULY 2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 60212:2010 (EQV)) 1261. I.S. EN 60456:2011/AC:2011 Date published 19 JULY 2011 Clothes washing machines for household use - Methods for measuring the performance 1262. I.S. EN 287-1:2011 Date published 21 JULY 2011 Qualification test of welders - Fusion welding - Part 1: Steels 1263. I.S. EN ISO 23611-4:2011 Date published 21 JULY 2011 Soil quality - Sampling of soil invertebrates - Part 4: Sampling, extraction and identification of soil-inhabiting nematodes (ISO 23611-4:2007) 1264. I.S. EN 12649:2008+A1:2011 Date published 21 JULY 2011 Concrete compactors and smoothing machines - Safety 1265. I.S. EN ISO 23611-2:2011 Date published 21 JULY 2011 Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction of micro- arthropods (Collembola and Acarina) (ISO 23611-2:2006) 1266. I.S. EN ISO 28706-5:2011 Date published 21 JULY 2011 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706 -5:2010) 1267. I.S. EN 15254-4:2008+A1:2011 Date published 21 JULY 2011 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions 1268. I.S. EN ISO 16050:2011 Date published 21 JULY 2011 Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid chromatographic method (ISO 16050:2003) 1269. I.S. EN ISO 23753-1:2011 Date published 21 JULY 2011 Soil Quality - Determination of dehydrogenase activity in soil - Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2005)

Date: 18/07/2018 Page 1270. S.R. CEN/TS 16233-1:2011 Date published 21 JULY 2011 Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 1: Determination of astaxanthin and canthaxanthin 1271. I.S. EN 15889:2011 Date published 21 JULY 2011 Fire-fighting hoses - Test methods 1272. I.S. EN ISO 23611-1:2011 Date published 21 JULY 2011 Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and formalin extraction of earthworms (ISO 23611-1:2006) 1273. I.S. EN ISO 23611-3:2011 Date published 21 JULY 2011 Soil quality - Sampling of soil invertebrates - Part 3: Sampling and soil extraction of enchytraeids (ISO 23611-3:2007) 1274. I.S. EN 71-2:2011 Date published 21 JULY 2011 Safety of toys - Part 2: Flammability 1275. I.S. EN ISO 23753-2:2011 Date published 21 JULY 2011 Soil Quality - Determination of dehydrogenase activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2005) 1276. S.R. CEN/TS 16233-2:2011 Date published 21 JULY 2011 Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 2: Identification of the enantiomer ratio of astaxanthin 1277. I.S. EN 912:2011 Date published 21 JULY 2011 Timber fasteners - Specifications for connectors for timbers 1278. I.S. EN 13050:2011 Date published 21 JULY 2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray 1279. I.S. EN ISO 7711-2:2011 Date published 21 JULY 2011 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011) 1280. I.S. EN 13869:2002+A1:2011/LC:2011-07 Date published 21 JULY 2011 Lighters - Child-resistance for lighters - Safety requirements and test methods 1281. I.S. EN ISO 11260:2011/LC:2011-07 Date published 29 JULY 2011 Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:1994+Cor 1:1996) 1282. I.S. EN 14961-4:2011/LC:2011-07 Date published 29 JULY 2011 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use

Date: 18/07/2018 Page 1283. I.S. EN ISO 11979-8:2009/A1:2011/LC:2011-05 Date published 29 JULY 2011 Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements - Amendment 1 (ISO 11979-8:2006/Amd 1:2011) 1284. I.S. EN ISO 11296-3:2011/LC:2011-05 Date published 29 JULY 2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2009+Cor 1:2011) 1285. I.S. EN ISO 13132:2011 Date published 27 JULY 2011 Laboratory glassware - Petri dishes (ISO 13132:2011) 1286. I.S. EN 15432-1:2011 Date published 27 JULY 2011 Winter and road service area maintenance equipments - Front-mounted equipments - Part 1: Fixed front mounting plates 1287. S.R. CEN/TS 15531-5:2011 Date published 27 JULY 2011 Public transport - Service interface for real-time information relating to public transport operations - Part 5: Functional service interfaces - Situation Exchange 1288. I.S. EN 1889-1:2011 Date published 27 JULY 2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles 1289. I.S. EN 4008-007:2011 Date published 27 JULY 2011 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard 1290. I.S. EN 1127-1:2011 Date published 27 JULY 2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology 1291. I.S. EN 4678:2011 Date published 27 JULY 2011 Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments 1292. S.R. CEN ISO/TS 16181:2011 Date published 27 JULY 2011 Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials (ISO/TS 16181:2011) 1293. I.S. EN ISO 9241-420:2011 Date published 27 JULY 2011 Ergonomics of human-system interaction - Part 420: Selection of physical input devices (ISO 9241-420:2011) 1294. I.S. EN ISO 13385-1:2011 Date published 27 JULY 2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)

Date: 18/07/2018 Page 1295. I.S. EN ISO 13385-2:2011 Date published 27 JULY 2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) 1296. I.S. EN 4008-008:2011 Date published 27 JULY 2011 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard 1297. I.S. EN 9101:2011 Date published 27 JULY 2011 Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations 1298. I.S. EN 3155-002:2011 Date published 27 JULY 2011 Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts 1299. I.S. EN ISO 9241-910:2011 Date published 27 JULY 2011 Ergonomics of human-system interaction - Part 910: Framework for tactile and haptic interaction (ISO 9241-910:2011) 1300. I.S. EN ISO 15912:2006/A1:2011 Date published 27 JULY 2011 Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials (ISO 15912:2006/FDAM 1:2011) 1301. I.S. EN ISO 22118:2011 Date published 27 JULY 2011 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics (ISO 22118:2011) 1302. I.S. EN ISO 21254-3:2011 Date published 27 JULY 2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011) 1303. I.S. EN 16009:2011 Date published 27 JULY 2011 Flameless explosion venting devices 1304. I.S. EN ISO 9999:2011 Date published 27 JULY 2011 Assistive products for persons with disability - Classification and terminology (ISO 9999:2011) 1305. I.S. EN ISO 14155:2011/AC:2011 Date published 27 JULY 2011 Clinical investigation of medical devices for human subjects - Good clinical practice - Technical Corrigendum 1 (ISO 14155:2011/Cor 1:2011)

Date: 18/07/2018 Page 1306. I.S. EN 2997-014:2011 Date published 27 JULY 2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire- resistant or non fire-resistant, operating temperatures - 65°C to 175°C continuous, 200° C continuous, 260°C peak - Part 014: Square flange receptacle with integrated accessory - Product standard 1307. I.S. EN 13480-5:2002+A1:2011 Date published 27 JULY 2011 Metallic industrial piping - Part 5: Inspection and testing 1308. I.S. EN ISO 14006:2011 Date published 27 JULY 2011 Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) 1309. I.S. EN ISO 13079:2011 Date published 27 JULY 2011 Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method (ISO 13079:2011) 1310. I.S. EN ISO 14825:2011 Date published 27 JULY 2011 Intelligent transport systems - Geographic Data Files (GDF) - GDF5.0 (ISO 14825:2011) 1311. I.S. EN ISO 22119:2011 Date published 27 JULY 2011 Microbiology of food and animal feeding stuffs - Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens - General requirements and definitions (ISO 22119:2011) 1312. I.S. EN ISO 21254-1:2011 Date published 27 JULY 2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles (ISO 21254-1:2011) 1313. I.S. EN 1089-3:2011 Date published 27 JULY 2011 Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding 1314. I.S. EN 13463-5:2011 Date published 27 JULY 2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' 1315. I.S. EN ISO 13130:2011 Date published 27 JULY 2011 Laboratory glassware - Desiccators (ISO 13130:2011) 1316. I.S. EN 13480-8:2007+A1:2011 Date published 27 JULY 2011 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping 1317. I.S. EN ISO 21254-2:2011 Date published 27 JULY 2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2: Threshold determination (ISO 21254-2:2011)

Date: 18/07/2018 Page 1318. I.S. EN ISO 6158:2011 Date published 27 JULY 2011 Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) 1319. I.S. EN 62216:2011 Date published 28 JULY 2011 Digital terrestrial television receivers for the DVB-T system (IEC 62216:2009 (EQV)) 1320. I.S. EN 62115:2005/A2:2011 Date published 28 JULY 2011 Electric toys - Safety (IEC 62115:2003/A2:2010 (MOD)) 1321. I.S. HD 60364-5-54:2011 Date published 28 JULY 2011 Low-voltage electrical installations -- Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors (IEC 60364-5-54:2011 (EQV)) 1322. I.S. EN 61307:2011 Date published 28 JULY 2011 Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2011 (EQV)) 1323. I.S. EN ISO 2867:2011 Date published 27 JULY 2011 Earth-moving machinery - Access systems (ISO 2867:2011) 1324. I.S. 419:2011 Date published 8 AUGUST 2011 Fire safety requirements for components of furniture 1325. SWIFT 7:2011 Date published 29 JULY 2011 Verification of environmental parameters for bagged coal supplied to the market in Ireland 1326. I.S. EN 61076-2:2011 Date published 10 AUGUST 2011 Connectors for electronic equipment - Product requirements -- Part 2: Sectional specification for circular connectors (IEC 61076-2:2011 (EQV)) 1327. I.S. EN 62660-1:2011 Date published 10 AUGUST 2011 Secondary lithium-ion cells for the propulsion of electric road vehicles -- Part 1: Performance testing (IEC 62660-1:2010 (EQV)) 1328. I.S. EN 62660-2:2011 Date published 10 AUGUST 2011 Secondary lithium-ion cells for the propulsion of electric road vehicles -- Part 2: Reliability and abuse testing (IEC 62660-2:2010 (EQV)) 1329. I.S. EN 60512-9-3:2011 Date published 10 AUGUST 2011 Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load (IEC 60512-9-3:2011 (EQV))

Date: 18/07/2018 Page 1330. I.S. EN 60684-3-205:2011 Date published 10 AUGUST 2011 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 (IEC 60684-3-205:2011 (EQV)) 1331. I.S. EN 60851-5:2008/A1:2011 Date published 10 AUGUST 2011 Winding wires - Test methods -- Part 5: Electrical properties (IEC 60851-5:2008/A1:2011 (EQV)) 1332. I.S. EN 60335-2-9:2003/A13:2010/AC:2011 Date published 10 AUGUST 2011 Household and similar electrical appliances - Safety -- Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances 1333. I.S. EN 61747-6-2:2011 Date published 11 AUGUST 2011 Liquid crystal display devices -- Part 6-2: Measuring methods for liquid crystal display modules - Reflective type (IEC 61747-6-2:2011 (EQV)) 1334. I.S. EN 61747-5-2:2011 Date published 11 AUGUST 2011 Liquid crystal display devices -- Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules (IEC 61747-5-2:2011 (EQV)) 1335. I.S. EN 60118-13:2011 Date published 11 AUGUST 2011 Electroacoustics - Hearing aids -- Part 13: Electromagnetic compatibility (EMC) (IEC 60118-13:2011 (EQV)) 1336. I.S. EN 62047-7:2011 Date published 11 AUGUST 2011 Semiconductor devices - Micro-electromechanical devices -- Part 7: MEMS BAW filter and duplexer for radio frequency control and selection (IEC 62047-7:2011 (EQV)) 1337. I.S. EN 62561-5:2011 Date published 11 AUGUST 2011 Lightning protection system components (LPSC) -- Part 5: Requirements for earth electrode inspection housings and earth electrode seals (IEC 62561-5:2011 (MOD)) 1338. I.S. EN 61300-3-46:2011 Date published 11 AUGUST 2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-46: Measurement - Bore diameter for guide pin in MT ferrules (IEC 61300-3-46:2011 (EQV)) 1339. I.S. EN 60191-6-12:2011 Date published 11 AUGUST 2011 Mechanical standardization of semiconductor devices -- Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guidelines for fine-pitch land grid array (FLGA) (IEC 60191-6-12:2011 (EQV)) 1340. I.S. EN 2240-079:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 079: Lamp, code 6839 - Product standard 1341. I.S. EN 13445-5:2009/A2:2011 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 5: Inspection and testing Date: 18/07/2018 Page 1342. I.S. EN 2240-075:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 075: Lamp, code 5448 - Product standard 1343. I.S. EN 2240-073:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 073: Lamp, code 4174 - Product standard 1344. S.R. CEN/TR 16239:2011 Date published 12 AUGUST 2011 Installation rules of fibrous (gypsum) plaster works 1345. I.S. EN 2240-077:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 077: Lamp, code 6832 - Product standard 1346. I.S. EN 2240-071:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 071: Lamp, code 3011 - Product standard 1347. I.S. EN 13445-5:2009/A1:2011 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 5: Inspection and testing 1348. I.S. EN 12952-4:2011 Date published 12 AUGUST 2011 Water-tube boilers and auxiliary installations - Part 4: In-service boiler life expectancy calculations 1349. I.S. EN 16020:2011 Date published 12 AUGUST 2011 Explosion diverters 1350. I.S. EN 2240-074:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 074: Lamp, code 5086 - Product standard 1351. I.S. EN 13445-5:2009/A3:2011 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 5: Inspection and testing 1352. I.S. EN 2240-076:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 076: Lamp, code 5678 - Product standard 1353. I.S. EN 2240-080:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 080: Lamp, code 7007-704 - Product standard 1354. I.S. EN 2240-082:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 082: Lamp, code 7079 - Product standard

Date: 18/07/2018 Page 1355. I.S. EN 2240-072:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 072: Lamp, code 3912 - Product standard 1356. S.R. CEN/TR 16219:2011 Date published 12 AUGUST 2011 Electronic Fee Collection - Value added services based on EFC on-board equipment 1357. I.S. EN 2240-078:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 078: Lamp, code 6838 - Product standard 1358. I.S. EN 2240-081:2011 Date published 12 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 081: Lamp, code 7070 - Product standard 1359. I.S. EN ISO 11990-1:2011 Date published 15 AUGUST 2011 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011) 1360. I.S. EN ISO 7380-2:2011 Date published 15 AUGUST 2011 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380 -2:2011) 1361. I.S. EN 2240-083:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 083: Lamp, code 7152 - Product standard 1362. I.S. EN 2240-097:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 097: Lamp, code 72601-12 - Product standard 1363. I.S. EN 2240-092:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 092: Lamp, code 7715 - Product standard 1364. I.S. EN 15967:2011 Date published 15 AUGUST 2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours 1365. I.S. EN 1090-2:2008+A1:2011 Date published 15 AUGUST 2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures 1366. I.S. EN ISO 1479:2011 Date published 15 AUGUST 2011 Hexagon head tapping screws (ISO 1479:2011) 1367. I.S. EN 2240-096:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 096: Lamp, code 72301-6 - Product standard

Date: 18/07/2018 Page 1368. I.S. EN ISO 7380-1:2011 Date published 15 AUGUST 2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) 1369. I.S. EN 2240-085:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 085: Lamp, code 7265 - Product standard 1370. I.S. EN ISO 15753:2006/A1:2011 Date published 15 AUGUST 2011 Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons (ISO 15753:2006/DAM 1:2010) 1371. I.S. EN 2240-099:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 099: Lamp, code 416700 - Product standard 1372. I.S. EN ISO 1207:2011 Date published 15 AUGUST 2011 Slotted cheese head screws - Product grade A (ISO 1207:2011) 1373. I.S. EN ISO 7051:2011 Date published 15 AUGUST 2011 Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) 1374. I.S. EN 2240-089:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 089: Lamp, code A7512-24 - Product standard 1375. I.S. EN 2240-095:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 095: Lamp, code 8552 - Product standard 1376. I.S. EN 16014:2011 Date published 15 AUGUST 2011 Hardware for furniture - Strength and durability of locking mechanisms 1377. I.S. EN 16006:2011 Date published 15 AUGUST 2011 Animal feeding stuffs - Determination of the Sum of Fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or post-column derivatisation 1378. I.S. EN ISO 1482:2011 Date published 15 AUGUST 2011 Slotted countersunk (flat) head tapping screws (ISO 1482:2011) 1379. I.S. EN ISO 1483:2011 Date published 15 AUGUST 2011 Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) 1380. I.S. EN ISO 7050:2011 Date published 15 AUGUST 2011 Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) 1381. I.S. EN ISO 12625-1:2011 Date published 15 AUGUST 2011 Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625 -1:2011)

Date: 18/07/2018 Page 1382. I.S. EN ISO 9936:2006/A1:2011 Date published 15 AUGUST 2011 Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography - Amendment 1: Updating of reagents and confirmation of statistical data validity (ISO 9936:2006/Amd 1:2011) 1383. I.S. EN 2240-086:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 086: Lamp, code 7333 - Product standard 1384. I.S. EN 2240-091:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 091: Lamp, code 7714 - Product standard 1385. S.R. CEN/TS 81-76:2011 Date published 15 AUGUST 2011 Safety rules for the construction and installation of lifts - Particular applications for passengers and goods passenger lifts - Part 76: Evacuation of disabled persons using lifts 1386. I.S. EN ISO 7053:2011 Date published 15 AUGUST 2011 Hexagon washer head tapping screws (ISO 7053:2011) 1387. S.R. CEN/TR 15449:2011 Date published 15 AUGUST 2011 Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures 1388. I.S. EN ISO 7049:2011 Date published 15 AUGUST 2011 Cross-recessed pan head tapping screws (ISO/FDIS 7049:2011) 1389. I.S. EN 2240-088:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 088: Lamp, code A7512-12 - Product standard 1390. I.S. EN ISO 772:2011 Date published 15 AUGUST 2011 Hydrometry - Vocabulary and symbols (ISO 772:2011) 1391. I.S. EN 15387:2011 Date published 15 AUGUST 2011 Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam 1392. I.S. EN ISO 1481:2011 Date published 15 AUGUST 2011 Slotted pan head tapping screws (ISO 1481:2011) 1393. I.S. EN 16007:2011 Date published 15 AUGUST 2011 Animal feeding stuffs - Determination of Ochratoxin A in animal feed by immunoaffinity column clean-up and High Performance Liquid Chromatography with fluorescence detection

Date: 18/07/2018 Page 1394. I.S. EN ISO 26304:2011 Date published 15 AUGUST 2011 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode- flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2011) 1395. I.S. EN 2240-090:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 090: Lamp, code 7683 - Product standard 1396. I.S. EN ISO 10271:2011 Date published 15 AUGUST 2011 Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011) 1397. I.S. EN 2240-084:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 084: Lamp, code 7153 - Product standard 1398. I.S. EN 2240-087:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 087: Lamp, code 7341 - Product standard 1399. I.S. EN 2240-098:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 098: Lamp, code 416650 - Product standard 1400. I.S. EN 2240-093:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 093: Lamp, code 7839 - Product standard 1401. I.S. EN 2240-094:2011 Date published 15 AUGUST 2011 Aerospace series - Lamps, incandescent - Part 094: Lamp, code 8022 - Product standard 1402. I.S. EN 14142-1:2011 Date published 16 AUGUST 2011 Postal services - Address databases - Part 1: Components of postal addresses 1403. S.R. CEN/TR 16227:2011 Date published 16 AUGUST 2011 Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants 1404. I.S. EN 12952-2:2011 Date published 16 AUGUST 2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories 1405. I.S. EN 12952-6:2011 Date published 16 AUGUST 2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler 1406. I.S. EN 836:1997+A4:2011 Date published 16 AUGUST 2011 Garden equipment - Powered lawnmowers - Safety

Date: 18/07/2018 Page 1407. I.S. EN ISO 23161:2011 Date published 16 AUGUST 2011 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO 23161:2009) 1408. I.S. EN 60671:2011 Date published 17 AUGUST 2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing (IEC 60671:2007 (EQV)) 1409. I.S. EN 62386-209:2011 Date published 17 AUGUST 2011 Digital addressable lighting interface -- Part 209: Particular requirements for control gear - Colour control (device type 8) (IEC 62386-209:2011 (EQV)) 1410. I.S. EN 61709:2011 Date published 17 AUGUST 2011 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion (IEC 61709:2011 (EQV)) 1411. I.S. EN 61500:2011 Date published 17 AUGUST 2011 Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions (IEC 61500:2009 (EQV)) 1412. I.S. EN 60965:2011 Date published 17 AUGUST 2011 Nuclear power plants - Control rooms - Supplementary control points for reactor shutdown without access to the main control room (IEC 60965:2009 (EQV)) 1413. I.S. EN 60079-35-1:2011 Date published 17 AUGUST 2011 Explosive atmospheres -- Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion (IEC 60079-35-1:2011 (EQV)) 1414. I.S. EN 60601-2-31:2008/A1:2011 Date published 17 AUGUST 2011 Medical electrical equipment -- Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source (IEC 60601-2-31:2008/A1:2011 (EQV)) 1415. I.S. EN ISO 11600:2003/A1:2011 Date published 19 AUGUST 2011 Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002/Amd 1:2011) 1416. I.S. EN 13050:2011/LC:2011-07 Date published 19 AUGUST 2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray 1417. I.S. EN 4675:2011/LC:2011-07 Date published 19 AUGUST 2011 Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm 1418. I.S. EN 12561-8:2011/LC:2011-06 Date published 19 AUGUST 2011 Railway applications - Tank wagons - Part 8: Heating connections

Date: 18/07/2018 Page 1419. I.S. EN 12561-2:2011/LC:2011-07 Date published 19 AUGUST 2011 Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return 1420. I.S. EN 544:2011/LC:2011-08 Date published 24 AUGUST 2011 Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods 1421. I.S. EN 13445-6:2009/LC:2011-07 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron 1422. I.S. EN 13445-8:2009/LC:2011-07 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys 1423. I.S. EN 13445-3:2009/LC:2011-07 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 3: Design 1424. I.S. EN 13445-2:2009/LC:2011-07 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 2: Materials 1425. I.S. EN 13445-1:2009/LC:2011-07 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 1: General 1426. I.S. EN 13445-4:2009/LC:2011-07 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 4: Fabrication 1427. I.S. EN 13445-5:2009/LC:2011-07 Date published 19 AUGUST 2011 Unfired pressure vessels - Part 5: Inspection and testing 1428. S.R. CLC/TS 50562:2011 Date published 23 AUGUST 2011 Railway applications - Fixed installations - Process, measures and demonstration of safety for electric traction systems 1429. I.S. EN 60601-2-46:2011 Date published 23 AUGUST 2011 Medical electrical equipment -- Part 2-46: Particular requirements for the basic safety and essential performance of operating tables (IEC 60601-2-46:2010 (EQV)) 1430. I.S. EN 60601-2-4:2011 Date published 23 AUGUST 2011 Medical electrical equipment -- Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators (IEC 60601-2-4:2010 (EQV)) 1431. I.S. EN 61851-1:2011 Date published 23 AUGUST 2011 Electric vehicle conductive charging system -- Part 1: General requirements (IEC 61851 -1:2010 (EQV))

Date: 18/07/2018 Page 1432. I.S. EN 60674-3-8:2011 Date published 23 AUGUST 2011 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation (IEC 60674-3-8:2011 (EQV)) 1433. I.S. EN 62520:2011 Date published 23 AUGUST 2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters (IEC 62520:2011 (EQV)) 1434. I.S. EN 62047-5:2011 Date published 23 AUGUST 2011 Semiconductor devices - Micro-electromechanical devices -- Part 5: RF MEMS switches (IEC 62047-5:2011 (EQV)) 1435. I.S. EN 60749-21:2011 Date published 23 AUGUST 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 21: Solderability (IEC 60749-21:2011 (EQV)) 1436. I.S. EN 60749-29:2011 Date published 23 AUGUST 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 29: Latch-up test (IEC 60749-29:2011 (EQV)) 1437. I.S. EN 62047-9:2011 Date published 23 AUGUST 2011 Semiconductor devices - Micro-electromechanical devices -- Part 9: Wafer to wafer bonding strength measurement for MEMS (IEC 62047-9:2011 (EQV)) 1438. I.S. EN 61076-2-001:2011 Date published 23 AUGUST 2011 Connectors for electronic equipment - Product requirements -- Part 2-001: Circular connectors - Blank detail specification (IEC 61076-2-001:2011 (EQV)) 1439. I.S. EN 60684-3-271:2011 Date published 23 AUGUST 2011 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:2011 (EQV)) 1440. I.S. EN 61812-1:2011 Date published 23 AUGUST 2011 Time relays for industrial and residential use -- Part 1: Requirements and tests (IEC 61812-1:2011 (EQV)) 1441. I.S. EN 80416-3:2002/A1:2011 Date published 23 AUGUST 2011 Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002/A1:2011 (EQV)) 1442. I.S. EN 62271-1:2008/A1:2011 Date published 23 AUGUST 2011 High-voltage switchgear and controlgear -- Part 1: Common specifications (IEC 62271 -1:2007/A1:2011 (EQV)) 1443. I.S. EN 61162-450:2011 Date published 23 AUGUST 2011 Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 450: Multiple talkers and multiple listeners - Ethernet interconnection (IEC 61162 -450:2011 (EQV)) Date: 18/07/2018 Page 1444. I.S. EN ISO 12543-5:2011 Date published 24 AUGUST 2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011) 1445. I.S. EN ISO 12543-6:2011 Date published 24 AUGUST 2011 Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2011) 1446. I.S. EN 15814:2011 Date published 24 AUGUST 2011 Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements 1447. I.S. EN 16082:2011 Date published 24 AUGUST 2011 Airport and aviation security services 1448. I.S. EN ISO 15320:2011 Date published 24 AUGUST 2011 Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) 1449. I.S. EN ISO 7494-1:2011 Date published 24 AUGUST 2011 Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494 -1:2011) 1450. I.S. EN 15331:2011 Date published 24 AUGUST 2011 Criteria for design, management and control of maintenance services for buildings 1451. I.S. EN 15967:2011/LC:2011-08 Date published 24 AUGUST 2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours 1452. I.S. EN ISO 12543-3:2011 Date published 24 AUGUST 2011 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011) 1453. I.S. EN 16081:2011 Date published 24 AUGUST 2011 Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing 1454. I.S. EN ISO 12543-2:2011 Date published 24 AUGUST 2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) 1455. I.S. EN ISO 1797-1:2011 Date published 24 AUGUST 2011 Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797 -1:2011) 1456. I.S. EN 1196:2011 Date published 24 AUGUST 2011 Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters

Date: 18/07/2018 Page 1457. I.S. EN ISO 9311-2:2011 Date published 24 AUGUST 2011 Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) 1458. I.S. EN ISO 14184-2:2011 Date published 24 AUGUST 2011 Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:2011) 1459. I.S. EN ISO 14184-1:2011 Date published 24 AUGUST 2011 Textiles - Determination of formaldehyde - Part 1: Free and hydrolised formaldehyde (water extraction method) (ISO 14184-1:2011) 1460. I.S. EN ISO 10943:2011 Date published 24 AUGUST 2011 Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2011) 1461. I.S. EN ISO 6272-2:2011 Date published 24 AUGUST 2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling- weight test, small-area indenter (ISO 6272-2:2011) 1462. I.S. EN ISO 24234:2004/A1:2011 Date published 24 AUGUST 2011 Dentistry - Mercury and alloys for dental amalgam - Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury (ISO 24234:2004/A1:2011) 1463. I.S. EN ISO 5459:2011 Date published 24 AUGUST 2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) 1464. I.S. EN ISO 12543-1:2011 Date published 24 AUGUST 2011 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) 1465. I.S. EN ISO 12543-4:2011 Date published 24 AUGUST 2011 Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011) 1466. I.S. EN ISO 6272-1:2011 Date published 24 AUGUST 2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling- weight test, large-area indenter (ISO 6272-1:2011) 1467. I.S. EN ISO 16140:2003/A1:2011 Date published 29 AUGUST 2011 Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods - Amendment 1 (ISO 16140:2003/AMD 1:2011) 1468. I.S. EN ISO 26800:2011 Date published 29 AUGUST 2011 Ergonomics - General approach, principles and concepts (ISO 26800:2011) 1469. I.S. EN ISO 4766:2011 Date published 29 AUGUST 2011 Slotted set screws with flat point (ISO 4766:2011)

Date: 18/07/2018 Page 1470. I.S. EN 1501-1:2011 Date published 29 AUGUST 2011 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles 1471. I.S. EN 1501-5:2011 Date published 29 AUGUST 2011 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles 1472. I.S. EN 267:2009+A1:2011 Date published 29 AUGUST 2011 Automatic forced draught burners for liquid fuels 1473. I.S. EN ISO 8224-1:2003/A1:2011 Date published 29 AUGUST 2011 Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods - Amendment 1 (ISO 8224-1:2003/AMD 1:2011) 1474. I.S. EN 12666-1:2005+A1:2011 Date published 29 AUGUST 2011 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system 1475. I.S. EN 61076-2-106:2011 Date published 5 SEPTEMBER 2011 Connectors for electronic equipment - Product requirements -- Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 (IEC 61076-2-106:2011 (EQV)) 1476. I.S. EN 61960:2011 Date published 5 SEPTEMBER 2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications (IEC 61960:2011 (EQV)) 1477. I.S. EN 60505:2011 Date published 5 SEPTEMBER 2011 Evaluation and qualification of electrical insulation systems (IEC 60505:2011 (EQV)) 1478. I.S. EN 61788-4:2011 Date published 5 SEPTEMBER 2011 Superconductivity -- Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011 (EQV)) 1479. I.S. EN 61788-6:2011 Date published 5 SEPTEMBER 2011 Superconductivity -- Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (IEC 61788-6:2011 (EQV)) 1480. I.S. EN 61788-11:2011 Date published 5 SEPTEMBER 2011 Superconductivity -- Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors (IEC 61788-11:2011 (EQV)) 1481. I.S. EN 62605:2011 Date published 5 SEPTEMBER 2011 Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries (IEC 62605:2011 (EQV))

Date: 18/07/2018 Page 1482. I.S. EN 60268-16:2011 Date published 5 SEPTEMBER 2011 Sound system equipment -- Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60268-16:2011 (EQV)) 1483. I.S. EN 62290-2:2011 Date published 5 SEPTEMBER 2011 Railway applications - Urban guided transport management and command/control systems -- Part 2: Functional requirements specification (IEC 62290-2:2011 (EQV)) 1484. I.S. EN 60974-12:2011 Date published 5 SEPTEMBER 2011 Arc welding equipment -- Part 12: Coupling devices for welding cables (IEC 60974 -12:2011 (EQV)) 1485. I.S. EN 60974-13:2011 Date published 5 SEPTEMBER 2011 Arc welding equipment -- Part 13: Welding clamp (IEC 60974-13:2011 (EQV)) 1486. I.S. EN 62634:2011 Date published 5 SEPTEMBER 2011 Radio data system (RDS) - Receiver products and characteristics - Methods of measurement (IEC 62634:2011 (EQV)) 1487. I.S. EN 62516-2:2011 Date published 5 SEPTEMBER 2011 Terrestrial digital multimedia broadcasting (T-DMB) receivers -- Part 2: Interactive data services using BIFS (IEC 62516-2:2011 (EQV)) 1488. I.S. EN 61747-6-3:2011 Date published 6 SEPTEMBER 2011 Liquid crystal display devices -- Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules (IEC 61747-6-3:2011 (EQV)) 1489. I.S. EN 62509:2011 Date published 6 SEPTEMBER 2011 Battery charge controllers for photovoltaic systems - Performance and functioning (IEC 62509:2010 (EQV)) 1490. I.S. EN 61850-8-1:2011 Date published 6 SEPTEMBER 2011 Communication networks and systems for power utility automation -- Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 (IEC 61850-8-1:2011 (EQV)) 1491. I.S. EN 61169-35:2011 Date published 6 SEPTEMBER 2011 Radio-frequency connectors -- Part 35: Sectional specification for 2,92 series RF connectors (IEC 61169-35:2011 (EQV)) 1492. I.S. EN 60684-3-247:2011 Date published 6 SEPTEMBER 2011 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 247: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall (IEC 60684-3-247:2011 (EQV)) 1493. I.S. EN 60947-4-3:2000/A2:2011 Date published 6 SEPTEMBER 2011 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4 -3:1999/A2:2011 (EQV)) Date: 18/07/2018 Page 1494. I.S. EN 62271-103:2011 Date published 6 SEPTEMBER 2011 High-voltage switchgear and controlgear -- Part 103: Switches for rated voltages above 1 kV up to and including 52 kV (IEC 62271-103:2011 (EQV)) 1495. I.S. EN 60749-40:2011 Date published 6 SEPTEMBER 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011 (EQV)) 1496. I.S. EN 50408:2008/A1:2011 Date published 6 SEPTEMBER 2011 Household and similar electrical appliances - Safety - Particular requirements for cab heaters for vehicles 1497. I.S. EN 62047-10:2011 Date published 15 SEPTEMBER 2011 Semiconductor devices - Micro-electromechanical devices -- Part 10: Micro-pillar compression test for MEMS materials (IEC 62047-10:2011 (EQV)) 1498. I.S. EN 62253:2011 Date published 6 SEPTEMBER 2011 Photovoltaic pumping systems - Design qualification and performance measurements (IEC 62253:2011 (EQV)) 1499. I.S. EN 16016-4:2011 Date published 9 SEPTEMBER 2011 Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification 1500. I.S. EN 15946:2011 Date published 9 SEPTEMBER 2011 Conservation of cultural property - Packing principles for transport 1501. I.S. EN 16016-3:2011 Date published 9 SEPTEMBER 2011 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation 1502. I.S. EN ISO 14271:2011 Date published 14 SEPTEMBER 2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011) 1503. S.R. CEN/TR 14142-2:2011 Date published 9 SEPTEMBER 2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions 1504. I.S. EN 12390-3:2009/AC:2011 Date published 9 SEPTEMBER 2011 Testing hardened concrete - Part 3: Compressive strength of test specimens 1505. I.S. EN ISO 2010:2011 Date published 14 SEPTEMBER 2011 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) 1506. I.S. EN ISO 7046-2:2011 Date published 14 SEPTEMBER 2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)

Date: 18/07/2018 Page 1507. I.S. EN ISO 7380-1:2011/LC:2011-08 Date published 9 SEPTEMBER 2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) 1508. I.S. EN ISO 7046-1:2011 Date published 14 SEPTEMBER 2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011) 1509. I.S. EN ISO 2009:2011 Date published 14 SEPTEMBER 2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) 1510. I.S. EN ISO 4671:2007/A1:2011 Date published 14 SEPTEMBER 2011 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011) 1511. I.S. EN ISO 7380-2:2011/LC:2011-08 Date published 9 SEPTEMBER 2011 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380 -2:2011) 1512. I.S. EN ISO 4628-6:2011 Date published 14 SEPTEMBER 2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) 1513. I.S. EN ISO 1580:2011 Date published 14 SEPTEMBER 2011 Slotted pan head screws - Product grade A (ISO 1580:2011) 1514. I.S. EN ISO 7045:2011 Date published 14 SEPTEMBER 2011 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) 1515. I.S. EN 16016-2:2011 Date published 9 SEPTEMBER 2011 Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples 1516. I.S. EN ISO 7047:2011 Date published 14 SEPTEMBER 2011 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) 1517. S.R. CEN/TR 16220:2011 Date published 9 SEPTEMBER 2011 Construction products - Assessment of release of dangerous substances - Complement to sampling 1518. S.R. CEN ISO/TS 27469:2011 Date published 9 SEPTEMBER 2011 Petroleum, petrochemical and natural gas industries - Method of test for fire dampers (ISO/TS 27469:2010) 1519. I.S. EN 226:1987/AC:1987 Date published 24 SEPTEMBER 2011 Atomizing oil burners - Connecting dimensions between burners and heat generators

Date: 18/07/2018 Page 1520. I.S. EN 60335-2-27:2010/AC:2010 Date published 8 NOVEMBER 2011 Household and similar electrical appliances - Safety -- Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation (IEC 60335-2 -27:2002 (MOD) + A1:2004 (MOD) + A2:2007 (MOD)) 1521. I.S. EN ISO 10863:2011 Date published 14 SEPTEMBER 2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011) 1522. I.S. EN 491:2011 Date published 14 SEPTEMBER 2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods 1523. I.S. EN 13451-3:2011 Date published 14 SEPTEMBER 2011 Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features 1524. I.S. EN 13451-1:2011 Date published 14 SEPTEMBER 2011 Swimming pool equipment - Part 1: General safety requirements and test methods 1525. I.S. EN 693:2001+A2:2011 Date published 14 SEPTEMBER 2011 Machine tools - Safety - Hydraulic presses 1526. I.S. EN 12201-1:2011 Date published 14 SEPTEMBER 2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General 1527. I.S. EN 12201-2:2011 Date published 14 SEPTEMBER 2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes 1528. I.S. EN 12201-3:2011 Date published 14 SEPTEMBER 2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings 1529. I.S. EN 12201-5:2011 Date published 14 SEPTEMBER 2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system 1530. I.S. EN ISO 13260:2011 Date published 14 SEPTEMBER 2011 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010) 1531. I.S. EN ISO 13229:2011 Date published 14 SEPTEMBER 2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)

Date: 18/07/2018 Page 1532. I.S. EN 31:2011 Date published 14 SEPTEMBER 2011 Wash basins - Connecting dimensions 1533. I.S. EN 33:2011 Date published 14 SEPTEMBER 2011 WC pans and WC suites - Connecting dimensions 1534. S.R. CEN/TS 16134:2011 Date published 14 SEPTEMBER 2011 Chimney terminals - General requirements and material independent test methods 1535. I.S. EN 26801:1993/A1:2011 Date published 14 SEPTEMBER 2011 Rubber or plastics hoses - Determination of volumetric expansion - Amendment 1: Deletion of alcohol as pressurizing fluid (ISO 6801:1983/Amd 1:2011) 1536. I.S. EN 15972:2011 Date published 14 SEPTEMBER 2011 Water quality - Guidance on quantitative and qualitative investigations of marine phytoplankton 1537. I.S. EN 15969-1:2011 Date published 14 SEPTEMBER 2011 Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data 1538. I.S. EN 13922:2011 Date published 14 SEPTEMBER 2011 Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels 1539. I.S. EN 15410:2011 Date published 14 SEPTEMBER 2011 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) 1540. I.S. EN 15411:2011 Date published 14 SEPTEMBER 2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) 1541. I.S. EN 15413:2011 Date published 14 SEPTEMBER 2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample 1542. I.S. EN 15415-1:2011 Date published 14 SEPTEMBER 2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles 1543. I.S. EN 15590:2011 Date published 14 SEPTEMBER 2011 Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index 1544. I.S. EN 15982:2011 Date published 14 SEPTEMBER 2011 Metadata for Learning Opportunities (MLO) - Advertising

Date: 18/07/2018 Page 1545. I.S. EN ISO 8362-4:2011 Date published 14 SEPTEMBER 2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO/FDIS 8362-4:2011) 1546. S.R. CWA 16335:2011 Date published 14 SEPTEMBER 2011 Biosafety professional competence 1547. S.R. CWA 16336:2011 Date published 14 SEPTEMBER 2011 Superfine woven wool fabric labelling - Requirements for Super S code definition 1548. I.S. EN 60749-7:2011 Date published 15 SEPTEMBER 2011 Semiconductor devices - Mechanical and climatic test methods -- Part 7: Internal moisture content measurement and the analysis of other residual gases (IEC 60749 -7:2011 (EQV)) 1549. I.S. EN ISO 13628-15:2011 Date published 29 SEPTEMBER 2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) 1550. I.S. EN 197-1:2011 Date published 23 SEPTEMBER 2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements 1551. I.S. EN ISO 17654:2011 Date published 23 SEPTEMBER 2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011) 1552. I.S. EN 13618:2011 Date published 23 SEPTEMBER 2011 Flexible hose assemblies in drinking water installations - Functional requirements and test methods 1553. I.S. EN 13071-3:2011 Date published 23 SEPTEMBER 2011 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections 1554. I.S. EN 16039:2011 Date published 23 SEPTEMBER 2011 Water quality - Guidance standard on assessing the hydromorphological features of lakes 1555. S.R. CEN/TS 13979-2:2011 Date published 23 SEPTEMBER 2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels 1556. S.R. CEN/TS 15718:2011 Date published 23 SEPTEMBER 2011 Railway applications - Wheelsets and bogies - Product requirements for cast wheels 1557. I.S. EN 16062:2011 Date published 23 SEPTEMBER 2011 Intelligent transport systems - eSafety - eCall high level application requirements (HLAP)

Date: 18/07/2018 Page 1558. I.S. EN ISO 17074:2011 Date published 23 SEPTEMBER 2011 Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame (ISO 17074:2006) 1559. I.S. EN ISO 17071:2011 Date published 23 SEPTEMBER 2011 Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006) 1560. I.S. EN ISO 17230:2011 Date published 23 SEPTEMBER 2011 Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006) 1561. I.S. EN ISO 17231:2011 Date published 23 SEPTEMBER 2011 Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2006) 1562. I.S. EN ISO 17932:2011 Date published 29 SEPTEMBER 2011 Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) 1563. I.S. EN ISO 20877:2011 Date published 23 SEPTEMBER 2011 Footwear - Test methods for whole shoe - Thermal insulation (ISO 20877:2011) 1564. I.S. EN ISO 11354-1:2011 Date published 23 SEPTEMBER 2011 Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process interoperability - Part 1: Framework for enterprise interoperability (ISO 11354-1:2011) 1565. S.R. CEN/TS 16238:2011 Date published 23 SEPTEMBER 2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface 1566. I.S. EN 15918:2011 Date published 23 SEPTEMBER 2011 Cycles - Cycle trailer - Safety requirements and test methods 1567. I.S. EN ISO 14051:2011 Date published 23 SEPTEMBER 2011 Environmental management - Material flow cost accounting - General framework (ISO 14051:2011) 1568. I.S. EN 50545-1:2011 Date published 26 SEPTEMBER 2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels -- Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides 1569. I.S. EN 60079-35-1:2011/AC:2011 Date published 26 SEPTEMBER 2011 Explosive atmospheres -- Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

Date: 18/07/2018 Page 1570. I.S. EN 60684-2:2011 Date published 26 SEPTEMBER 2011 Flexible insulating sleeving -- Part 2: Methods of test (IEC 60684-2:2011 (EQV)) 1571. I.S. EN 61988-1:2011 Date published 26 SEPTEMBER 2011 Plasma display panels -- Part 1: Terminology and letter symbols (IEC 61988-1:2011 (EQV)) 1572. I.S. EN 62561-6:2011 Date published 26 SEPTEMBER 2011 Lightning protection system components (LPSC) -- Part 6: Requirements for lightning strike counters (LSC) (IEC 62561-6:2011 (MOD)) 1573. I.S. EN ISO 8536-1:2011 Date published 14 SEPTEMBER 2011 Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) 1574. I.S. EN ISO 15546:2011 Date published 29 SEPTEMBER 2011 Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011) 1575. I.S. EN ISO 11591:2011 Date published 29 SEPTEMBER 2011 Small craft, engine-driven - Field of vision from helm position (ISO 11591:2011) 1576. S.R. CWA 16356-1:2011 Date published 29 SEPTEMBER 2011 Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 1: Introduction 1577. S.R. CEN/TS 15523:2011 Date published 29 SEPTEMBER 2011 Postal Services - Statement of mailing submission 1578. S.R. CWA 16356-3:2011 Date published 29 SEPTEMBER 2011 Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 3: European CORE INVOICE syntax mapping 1579. S.R. CEN/TR 16269:2011 Date published 29 SEPTEMBER 2011 Ambient air - Guide for the measurement of anions and cations in PM2,5 1580. S.R. CWA 15793:2011 Date published 29 SEPTEMBER 2011 Laboratory biorisk management 1581. S.R. CWA 16356-2:2011 Date published 29 SEPTEMBER 2011 Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 2: European CORE INVOICE data model 1582. I.S. EN 15102:2007+A1:2011 Date published 29 SEPTEMBER 2011 Decorative wall coverings - Roll and panel form 1583. I.S. EN 55014-1:2006/A2:2011 Date published 28 SEPTEMBER 2011 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission (CISPR 14-1:2005/A2:2011 (EQV))

Date: 18/07/2018 Page 1584. I.S. EN 61557-13:2011 Date published 28 SEPTEMBER 2011 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 13: Hand- held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems (IEC 61557-13:2011 (EQV)) 1585. I.S. EN 62496-2-1:2011 Date published 28 SEPTEMBER 2011 Optical circuit boards -- Part 2-1: Measurements - Optical attenuation and isolation (IEC 62496-2-1:2011 (EQV)) 1586. I.S. EN 62271-204:2011 Date published 28 SEPTEMBER 2011 High-voltage switchgear and controlgear -- Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV (IEC 62271-204:2011 (EQV)) 1587. I.S. EN 61290-4-1:2011 Date published 28 SEPTEMBER 2011 Optical amplifiers - Test methods -- Part 4-1: Gain transient parameters - Two- wavelength method (IEC 61290-4-1:2011 (EQV)) 1588. I.S. EN 61290-4-2:2011 Date published 28 SEPTEMBER 2011 Optical amplifiers - Test methods -- Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011 (EQV)) 1589. I.S. EN 16072:2011 Date published 6 OCTOBER 2011 Intelligent transport systems - eSafety - Pan-European eCall operating requirements 1590. I.S. EN 1598:2011 Date published 6 OCTOBER 2011 Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes 1591. I.S. EN 16105:2011 Date published 6 OCTOBER 2011 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water 1592. I.S. EN 1998-2:2005/A2:2011 Date published 6 OCTOBER 2011 Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges 1593. I.S. EN 15925:2011 Date published 6 OCTOBER 2011 Fertilizers - Extraction of total sulfur present in various forms 1594. I.S. EN 15926:2011 Date published 6 OCTOBER 2011 Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms 1595. S.R. CWA 15748-41:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification – Release 3.10 - Part 41: XFS MIB Device Specific Definitions - Cash In Module Device Class MIB 3.10 1596. S.R. CWA 15748-45:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 45: XFS MIB Device Specific Definitions - Card Dispenser Device Class MIB 3.10

Date: 18/07/2018 Page 1597. I.S. EN ISO 3961:2011 Date published 6 OCTOBER 2011 Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:2009) 1598. S.R. CWA 15748-31:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 31: XFS MIB Device Specific Definitions - Identification Card Device Class MIB 3.10 1599. S.R. CWA 15748-46:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 46: XFS MIB Device Specific Definitions - Barcode Reader Device Class MIB 3.10 1600. I.S. EN 71-8:2011 Date published 6 OCTOBER 2011 Safety of toys - Part 8: Activity toys for domestic use 1601. I.S. EN 15957:2011 Date published 6 OCTOBER 2011 Fertilizers - Extraction of phosphorus which is soluble in neutral ammonium citrate 1602. S.R. CWA 15748-44:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 44: XFS MIB Application Management MIB 3.10 1603. I.S. EN 15942:2011 Date published 31 OCTOBER 2011 Sustainability of construction works - Environmental product declarations - Communication format business-to-business 1604. S.R. CWA 15748-32:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 32: XFS MIB Device Specific Definitions - Cash Dispenser Device Class MIB 3.10 1605. S.R. CWA 15748-33:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 33: XFS MIB Device Specific Definitions - PIN Keypad Device Class MIB 3.10 1606. I.S. EN 15969-2:2011 Date published 6 OCTOBER 2011 Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data 1607. I.S. EN 15956:2011 Date published 6 OCTOBER 2011 Fertilizers - Extraction of phosphorus soluble in mineral acids 1608. S.R. CWA 15748-29:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 29: XFS MIB Architecture and SNMP Extensions MIB Version 3.10 1609. S.R. CWA 15748-35:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 35: XFS MIB Device Specific Definitions - Depository Device Class MIB 3.10

Date: 18/07/2018 Page 1610. S.R. CWA 15748-39:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 39: XFS MIB Device Specific Definitions - Alarm Device Class MIB 3.10 1611. S.R. CWA 15748-47:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 47: XFS MIB Device Specific Definitions - Item Processing Module Device Class MIB Version 3.10 1612. I.S. EN 15924:2011 Date published 6 OCTOBER 2011 Fertilizers - Determination of the fineness of grinding of soft natural phosphates 1613. S.R. CWA 15748-37:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 37: XFS MIB Device Specific Definitions - Sensors and Indicators Unit Device Class MIB 3.10 1614. S.R. CWA 15748-38:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 38: XFS MIB Device Specific Definitions - Camera Device Class MIB 3.10 1615. S.R. CWA 15748-40:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 40: XFS MIB Device Specific Definitions - Card Embossing Unit Device Class MIB 3.10 1616. S.R. CWA 15748-43:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode Class MIB 3.10 1617. I.S. EN 16114:2011 Date published 6 OCTOBER 2011 Management consultancy services 1618. I.S. EN 16016-1:2011 Date published 6 OCTOBER 2011 Non destructive testing - Radiation methods - Computed tomography - Part 1: Terminology 1619. I.S. EN 13411-8:2011 Date published 6 OCTOBER 2011 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging 1620. I.S. EN 16016-3:2011/LC:2011-09 Date published 6 OCTOBER 2011 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation 1621. S.R. CWA 15748-30:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 30: XFS MIB Device Specific Definitions - Printer Device Class MIB 3.10

Date: 18/07/2018 Page 1622. S.R. CWA 15748-34:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner Device Class MIB 3.10 1623. S.R. CWA 15748-36:2011 Date published 6 OCTOBER 2011 Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 36: XFS MIB Device Specific Definitions - Text Terminal Unit Device Class MIB 3.10 1624. I.S. EN 62109-2:2011 Date published 7 OCTOBER 2011 Safety of power converters for use in photovoltaic power systems -- Part 2: Particular requirements for inverters (IEC 62109-2:2011 (EQV)) 1625. I.S. EN 55017:2011 Date published 7 OCTOBER 2011 Methods of measurement of the suppression characteristics of passive EMC filtering devices (CISPR 17:2011 (EQV)) 1626. S.R. CWA 16336:2011/LC:2011-09 Date published 29 SEPTEMBER 2011 Superfine woven wool fabric labelling - Requirements for Super S code definition 1627. S.R. CEN/TS 16157-2:2011 Date published 11 OCTOBER 2011 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 2: Location referencing 1628. I.S. EN ISO 15609-5:2011 Date published 11 OCTOBER 2011 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011) 1629. I.S. EN ISO 5912:2011 Date published 11 OCTOBER 2011 Camping tents (ISO 5912:2011) 1630. I.S. EN 15898:2011 Date published 11 OCTOBER 2011 Conservation of cultural property - Main general terms and definitions 1631. I.S. EN ISO 20846:2011 Date published 11 OCTOBER 2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) 1632. I.S. EN ISO 15011-5:2011 Date published 11 OCTOBER 2011 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materia 1633. I.S. EN ISO 19131:2008/A1:2011 Date published 11 OCTOBER 2011 Geographic information - Data product specifications - Amendment 1: Requirements relating to the inclusion of an application schema and feature catalogue and the treatment of coverages in an application schema (ISO 19131:2007/Amd 1:2011)

Date: 18/07/2018 Page 1634. I.S. EN 13739-1:2011 Date published 11 OCTOBER 2011 Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements 1635. I.S. EN ISO 15006:2011 Date published 11 OCTOBER 2011 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011) 1636. I.S. EN ISO 15792-1:2008/A1:2011 Date published 11 OCTOBER 2011 Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/Amd 1:2011) 1637. I.S. EN ISO 6224:2011 Date published 11 OCTOBER 2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) 1638. I.S. EN 693:2001+A2:2011/LC:2011-10 Date published 11 OCTOBER 2011 Machine tools - Safety - Hydraulic presses 1639. I.S. EN 16117-1:2011 Date published 11 OCTOBER 2011 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % 1640. I.S. EN ISO 9092:2011 Date published 11 OCTOBER 2011 Textiles - Nonwovens - Definition (ISO 9092:2011) 1641. S.R. CEN/TS 16157-3:2011 Date published 11 OCTOBER 2011 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 3: Situation Publication 1642. I.S. EN ISO 9012:2011 Date published 11 OCTOBER 2011 Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) 1643. I.S. EN ISO 105-B10:2011 Date published 11 OCTOBER 2011 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) 1644. I.S. EN ISO 12677:2011 Date published 11 OCTOBER 2011 Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011) 1645. I.S. EN 13739-2:2011 Date published 11 OCTOBER 2011 Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods 1646. S.R. CEN/TS 16157-1:2011 Date published 11 OCTOBER 2011 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 1: Context and framework

Date: 18/07/2018 Page 1647. I.S. EN ISO 6887-4:2003/A1:2011 Date published 11 OCTOBER 2011 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products other than milk and milk products, meat an 1648. I.S. EN ISO 10882-1:2011 Date published 11 OCTOBER 2011 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) 1649. I.S. EN ISO 3630-5:2011 Date published 11 OCTOBER 2011 Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630-5:2011) 1650. S.R. CEN/TR 15524:2011 Date published 11 OCTOBER 2011 Postal services - Customer-directed information including track and trace - General concepts and definitions 1651. I.S. EN 50401:2006/A1:2011 Date published 14 OCTOBER 2011 Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service 1652. I.S. EN 62271-106:2011 Date published 14 OCTOBER 2011 High-voltage switchgear and controlgear -- Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2011 (EQV)) 1653. I.S. EN 62271-102:2002/A1:2011 Date published 14 OCTOBER 2011 High-voltage switchgear and controlgear -- Part 102: Alternating current disconnectors and earthing switches (IEC 62271-102:2001/A1:2011 (EQV)) 1654. I.S. EN 55016-4-2:2011 Date published 14 OCTOBER 2011 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (CISPR 16-4-2:2011 (EQV)) 1655. I.S. EN 60794-2-10:2011 Date published 14 OCTOBER 2011 Optical fibre cables -- Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2011 (EQV)) 1656. I.S. EN 60335-1:2002/A15:2011 Date published 14 OCTOBER 2011 Household and similar electrical appliances - Safety -- Part 1: General requirements 1657. I.S. EN 61988-2-4:2011 Date published 14 OCTOBER 2011 Plasma display panels -- Part 2-4: Measuring methods - Visual quality: Image artifacts (IEC 61988-2-4:2011 (EQV)) 1658. I.S. EN 60038:2011 Date published 14 OCTOBER 2011 CENELEC standard voltages (IEC 60038:2009 (MOD))

Date: 18/07/2018 Page 1659. S.R. CLC/TR 62685:2011 Date published 14 OCTOBER 2011 Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) (IEC/TR 62685:2010 (EQV)) 1660. I.S. EN 60601-1:2006/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance 1661. I.S. EN 60601-2-2:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories 1662. I.S. EN 60601-2-19:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators 1663. I.S. EN 60601-2-20:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators 1664. I.S. EN 60601-2-21:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers 1665. I.S. EN 60601-2-29:2008/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators 1666. I.S. EN 60601-2-33:2010/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis 1667. I.S. EN 80601-2-35:2009/A11:2011-2015-10 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use 1668. I.S. EN 60601-2-37:2008/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment 1669. I.S. EN 61850-7-1:2011 Date published 20 OCTOBER 2011 Communication networks and systems for power utility automation -- Part 7-1: Basic communication structure - Principles and models (IEC 61850-7-1:2011 (EQV))

Date: 18/07/2018 Page 1670. I.S. EN 60068-2-83:2011 Date published 20 OCTOBER 2011 Environmental testing -- Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste (IEC 60068-2-83:2011 (EQV)) 1671. I.S. EN 61967-8:2011 Date published 20 OCTOBER 2011 Integrated circuits - Measurement of electromagnetic emissions -- Part 8: Measurement of radiated emissions - IC stripline method (IEC 61967-8:2011 (EQV)) 1672. I.S. EN 60601-2-39:2008/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment 1673. I.S. EN 60601-2-41:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-41: Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis 1674. I.S. EN 60601-2-44:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography 1675. I.S. EN 60601-2-50:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment 1676. I.S. EN 80601-2-58:2009/A11:2011 Date published 20 OCTOBER 2011 Medical electrical equipment -- Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery 1677. I.S. EN 12409:2008+A1:2011 Date published 21 OCTOBER 2011 Plastics and rubber machines - Thermoforming machines - Safety requirements 1678. I.S. EN 15746-2:2010+A1:2011 Date published 21 OCTOBER 2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements 1679. I.S. EN 1168:2005+A3:2011 Date published 21 OCTOBER 2011 Precast concrete products - Hollow core slabs 1680. I.S. EN 15746-1:2010+A1:2011 Date published 21 OCTOBER 2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working 1681. I.S. EN 15726:2011 Date published 21 OCTOBER 2011 Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air- conditioned/ventilated rooms to evaluate thermal and acoustic conditions

Date: 18/07/2018 Page 1682. I.S. EN 3034:2009/AC:2011 Date published 21 OCTOBER 2011 Aerospace series - Nuts, self-locking, hexagonal with captive washer - In heat resisting steel FE-PA92HT (A286), silver coated Classification: 1100 MPa/425 °C 1683. I.S. EN 13611:2007+A2:2011 Date published 21 OCTOBER 2011 Safety and control devices for gas burners and gas burning appliances - General requirements 1684. I.S. EN 26801:1993/A1:2011/LC:2011-10 Date published 21 OCTOBER 2011 Rubber or plastics hoses - Determination of volumetric expansion - Amendment 1: Deletion of alcohol as pressurizing fluid (ISO 6801:1983/Amd 1:2011) 1685. I.S. EN 13146-9:2009+A1:2011 Date published 21 OCTOBER 2011 Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness 1686. I.S. EN 13126-2:2011 Date published 21 OCTOBER 2011 Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fastener handles 1687. I.S. EN 13145:2001+A1:2011 Date published 21 OCTOBER 2011 Railway applications - Track - Wood sleepers and bearers 1688. S.R. CWA 15517:2011 Date published 25 OCTOBER 2011 European Handbook for Defence Procurement 1689. I.S. EN 13036-4:2011 Date published 25 OCTOBER 2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test 1690. S.R. CEN/TR 16243:2011 Date published 25 OCTOBER 2011 Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters 1691. I.S. EN ISO 7539-6:2011 Date published 31 OCTOBER 2011 Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539 -6:2011) 1692. I.S. EN 15700:2011 Date published 31 OCTOBER 2011 Safety for conveyor belts for winter sport or leisure use 1693. I.S. EN 15221-5:2011 Date published 31 OCTOBER 2011 Facility Management - Part 5: Guidance on Facility Management processes

Date: 18/07/2018 Page 1694. I.S. EN 4612-009:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall 1695. I.S. EN 4612-008:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - single extruded wall f 1696. I.S. EN 4612-006:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall fo 1697. I.S. EN ISO 15747:2011 Date published 31 OCTOBER 2011 Plastic containers for intravenous injections (ISO 15747:2010) 1698. I.S. EN ISO 18113-2:2011 Date published 31 OCTOBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2009) 1699. I.S. EN 1559-3:2011 Date published 31 OCTOBER 2011 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings 1700. I.S. EN ISO 30013:2011 Date published 31 OCTOBER 2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) 1701. I.S. EN 4612-013:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 013: SX, TC and UC - Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Si 1702. I.S. EN 4612-010:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated copper - Operating temperatures, between - 65 °C 1703. I.S. EN 13232-6:2005+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings 1704. I.S. EN 13232-7:2006+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts

Date: 18/07/2018 Page 1705. I.S. EN ISO 18113-4:2011 Date published 31 OCTOBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009) 1706. I.S. EN 13232-5:2005+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 5: Switches 1707. I.S. EN 14033-3:2009+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements 1708. I.S. EN 1642:2011 Date published 31 OCTOBER 2011 Dentistry - Medical devices for dentistry - Dental implants 1709. I.S. EN 13861:2011 Date published 31 OCTOBER 2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery 1710. I.S. EN ISO 26203-2:2011 Date published 31 OCTOBER 2011 Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011) 1711. I.S. EN 4612-003:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall 1712. I.S. EN 4612-012:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 012: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall 1713. I.S. EN 13232-4:2005+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection 1714. I.S. EN ISO 14155:2011-10 Date published 31 OCTOBER 2011 Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011) 1715. I.S. EN ISO 14602:2011 Date published 31 OCTOBER 2011 Non-active surgical implants - Implants for osteosynthesis - Particular requirements (ISO 14602:2010) 1716. I.S. EN ISO 1135-4:2011 Date published 31 OCTOBER 2011 Transfusion equipment for medical use - Part 4: Transfusion sets for single use (ISO 1135-4:2010)

Date: 18/07/2018 Page 1717. I.S. EN ISO 12137:2011 Date published 31 OCTOBER 2011 Paints and varnishes - Determination of mar resistance (ISO 12137:2011) 1718. I.S. EN ISO 20312:2011 Date published 31 OCTOBER 2011 Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011) 1719. I.S. EN 15221-3:2011 Date published 31 OCTOBER 2011 Facility Management - Part 3: Guidance on quality in Facility Management 1720. I.S. EN 15221-6:2011 Date published 31 OCTOBER 2011 Facility Management - Part 6: Area and Space Measurement in Facility Management 1721. I.S. EN 1114-1:2011 Date published 31 OCTOBER 2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders 1722. I.S. EN 4612-007:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall f 1723. I.S. EN 16147:2011/AC:2011 Date published 31 OCTOBER 2011 Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units 1724. I.S. EN ISO 80601-2-12:2011/AC:2011-2014-09 Date published 31 OCTOBER 2011 Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators - Technical Corrigendum 1 (ISO 80601 -2-12:2011/Cor 1:2011) 1725. I.S. EN 13232-2:2003+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design 1726. I.S. EN ISO 15001:2011 Date published 31 OCTOBER 2011 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) 1727. I.S. EN ISO 18113-1:2011 Date published 31 OCTOBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) 1728. I.S. EN ISO 18113-5:2011 Date published 31 OCTOBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)

Date: 18/07/2018 Page 1729. I.S. EN 4612-002:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: General 1730. I.S. EN 1561:2011 Date published 31 OCTOBER 2011 Founding - Grey cast irons 1731. I.S. EN ISO 1518-2:2011 Date published 31 OCTOBER 2011 Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011) 1732. I.S. EN ISO 14906:2011 Date published 31 OCTOBER 2011 Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2011) 1733. I.S. EN 4612-005:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for op 1734. I.S. EN 13232-3:2003+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction 1735. I.S. EN 13232-8:2007+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 8: Expansion devices 1736. I.S. EN 13232-9:2006+A1:2011 Date published 31 OCTOBER 2011 Railway applications - Track - Switches and crossings - Part 9: Layouts 1737. I.S. EN 15695-2:2009/AC:2011 Date published 31 OCTOBER 2011 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures 1738. I.S. EN ISO 15530-3:2011 Date published 31 OCTOBER 2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) 1739. I.S. EN 15221-4:2011 Date published 31 OCTOBER 2011 Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management 1740. I.S. EN 4612-004:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall

Date: 18/07/2018 Page 1741. I.S. EN 3687:2010/AC:2011 Date published 31 OCTOBER 2011 Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C 1742. I.S. EN ISO 18113-3:2011 Date published 31 OCTOBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2009) 1743. S.R. CEN ISO/TS 16407-1:2011 Date published 31 OCTOBER 2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011) 1744. S.R. CEN ISO/TS 16410-1:2011 Date published 31 OCTOBER 2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TS 16410-1:2011) 1745. I.S. EN ISO 19118:2011 Date published 31 OCTOBER 2011 Geographic information - Encoding (ISO 19118:2011) 1746. I.S. EN 4612-011:2011 Date published 31 OCTOBER 2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall 1747. I.S. EN 61869-5:2011 Date published 3 NOVEMBER 2011 Instrument transformers -- Part 5: Additional requirements for capacitor voltage transformers (IEC 61869-5:2011 (EQV)) 1748. I.S. EN 60695-6-2:2011 Date published 3 NOVEMBER 2011 Fire hazard testing -- Part 6-2: Smoke obscuration - Summary and relevance of test methods (IEC 60695-6-2:2011 (EQV)) 1749. I.S. EN 50085-2-1:2006/A1:2011 Date published 3 NOVEMBER 2011 Cable trunking systems and cable ducting systems for electrical installations -- Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings 1750. I.S. EN 60695-7-2:2011 Date published 3 NOVEMBER 2011 Fire hazard testing -- Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods (IEC 60695-7-2:2011 (EQV)) 1751. I.S. EN 60695-7-3:2011 Date published 3 NOVEMBER 2011 Fire hazard testing -- Part 7-3: Toxicity of fire effluent - Use and interpretation of test results (IEC 60695-7-3:2011 (EQV)) 1752. I.S. EN 61869-3:2011 Date published 3 NOVEMBER 2011 Instrument transformers -- Part 3: Additional requirements for inductive voltage transformers (IEC 61869-3:2011 (EQV))

Date: 18/07/2018 Page 1753. I.S. EN 62047-12:2011 Date published 3 NOVEMBER 2011 Semiconductor devices - Micro-electromechanical devices -- Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures (IEC 62047-12:2011 (EQV)) 1754. I.S. HD 60364-7-701:2007/AC:2011 Date published 3 NOVEMBER 2011 Low-voltage electrical installations -- Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower 1755. I.S. HD 538.1 S1:1992/AC:2011 Date published 3 NOVEMBER 2011 Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV -- Part 1: General requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV 1756. I.S. EN 60950-1:2006/AC:2011 Date published 3 NOVEMBER 2011 Information technology equipment - Safety -- Part 1: General requirements 1757. I.S. EN 50400:2006/AC:2011 Date published 3 NOVEMBER 2011 Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service 1758. I.S. HD 428.1 S1:1992/AC:2011 Date published 3 NOVEMBER 2011 Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV -- Part 1: General requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV 1759. I.S. EN 50149:2001/AC:2011 Date published 3 NOVEMBER 2011 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires 1760. I.S. EN ISO 11699-1:2011 Date published 7 NOVEMBER 2011 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008) 1761. I.S. EN 14511-1:2011 Date published 7 NOVEMBER 2011 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions 1762. I.S. EN 10245-3:2011 Date published 7 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire 1763. I.S. EN 10245-4:2011 Date published 7 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire 1764. I.S. EN ISO 11699-2:2011 Date published 7 NOVEMBER 2011 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998)

Date: 18/07/2018 Page 1765. I.S. EN 490:2011 Date published 7 NOVEMBER 2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications 1766. I.S. EN ISO 50001:2011 Date published 7 NOVEMBER 2011 Energy management systems - Requirements with guidance for use (ISO 50001:2011) 1767. I.S. EN 14511-4:2011 Date published 7 NOVEMBER 2011 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements 1768. I.S. EN 15440:2011/AC:2011 Date published 7 NOVEMBER 2011 Solid recovered fuels - Methods for the determination of biomass content 1769. I.S. EN 15942:2011/LC:2011-10 Date published 7 NOVEMBER 2011 Sustainability of construction works - Environmental product declarations - Communication format business-to-business 1770. I.S. EN 10245-5:2011 Date published 7 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire 1771. I.S. EN 15875:2011 Date published 7 NOVEMBER 2011 Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste 1772. I.S. EN 1570-1:2011 Date published 7 NOVEMBER 2011 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings 1773. I.S. EN 10270-1:2011 Date published 7 NOVEMBER 2011 Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire 1774. I.S. EN 10257-2:2011 Date published 7 NOVEMBER 2011 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables 1775. I.S. EN 14511-3:2011 Date published 7 NOVEMBER 2011 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods 1776. I.S. EN 14511-2:2011 Date published 7 NOVEMBER 2011 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions 1777. I.S. EN 10245-1:2011 Date published 7 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules

Date: 18/07/2018 Page 1778. I.S. EN 10245-2:2011 Date published 7 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire 1779. I.S. EN 10257-1:2011 Date published 7 NOVEMBER 2011 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables 1780. I.S. EN 10270-3:2011 Date published 7 NOVEMBER 2011 Steel wire for mechanical springs - Part 3: Stainless spring steel wire 1781. I.S. EN 15780:2011 Date published 7 NOVEMBER 2011 Ventilation for buildings - Ductwork - Cleanliness of ventilation systems 1782. I.S. EN 10270-2:2011 Date published 7 NOVEMBER 2011 Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire 1783. I.S. EN ISO 14155:2011/LC:2011-11 Date published 7 NOVEMBER 2011 Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011) 1784. I.S. EN 60335-2-35:2002/A2:2011 Date published 15 NOVEMBER 2011 Household and similar electrical appliances - Safety -- Part 2-35: Particular requirements for instantaneous water heaters (IEC 60335-2-35:2002/A2:2009 (MOD)) 1785. I.S. EN 60076-16:2011 Date published 15 NOVEMBER 2011 Power transformers -- Part 16: Transformers for wind turbines applications (IEC 60076 -16:2011 (EQV)) 1786. I.S. EN 50464-4:2007/A1:2011 Date published 15 NOVEMBER 2011 Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV -- Part 4: Requirements and tests concerning pressurised corrugated tanks 1787. I.S. EN 62208:2011 Date published 15 NOVEMBER 2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements (IEC 62208:2011 (EQV)) 1788. I.S. EN 61439-1:2011 Date published 15 NOVEMBER 2011 Low-voltage switchgear and controlgear assemblies -- Part 1: General rules (IEC 61439 -1:2011 (EQV)) 1789. I.S. EN 61439-2:2011 Date published 15 NOVEMBER 2011 Low-voltage switchgear and controlgear assemblies -- Part 2: Power switchgear and controlgear assemblies (IEC 61439-2:2011 (EQV)) 1790. I.S. EN 62554:2011 Date published 15 NOVEMBER 2011 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011 (EQV))

Date: 18/07/2018 Page 1791. I.S. EN 60674-3-1:1998/A1:2011 Date published 15 NOVEMBER 2011 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3 -1:1998/A1:2011 (EQV)) 1792. I.S. EN 50563:2011 Date published 15 NOVEMBER 2011 External a.c. - d.c. and a.c. - a.c. power supplies – Determination of no-load power and average efficiency of active modes 1793. I.S. EN 61587-2:2011 Date published 15 NOVEMBER 2011 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 2: Seismic tests for cabinets and racks (IEC 61587-2:2011 (EQV)) 1794. I.S. EN 55020:2007/A11:2011 Date published 15 NOVEMBER 2011 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement 1795. S.R. CLC/TR 62662:2011 Date published 15 NOVEMBER 2011 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials (IEC/TR 62662:2010 (EQV)) 1796. I.S. EN 60819-3-3:2011 Date published 15 NOVEMBER 2011 Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Unfilled aramid (aromatic polyamide) papers (IEC 60819-3-3:2011 (EQV)) 1797. I.S. EN ISO 50001:2011 Date published 15 NOVEMBER 2011 Energy management systems - Requirements with guidance for use 1798. I.S. EN 55022:2010/AC:2011 Date published 15 NOVEMBER 2011 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement 1799. I.S. EN 60079-14:2008/AC:2011 Date published 15 NOVEMBER 2011 Explosive atmospheres -- Part 14: Electrical installations design, selection and erection 1800. I.S. EN 60929:2011/AC:2011 Date published 15 NOVEMBER 2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements 1801. I.S. EN 61347-2-3:2011/AC:2011 Date published 15 NOVEMBER 2011 Lamp control gear -- Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps 1802. I.S. EN ISO 3035:2011 Date published 14 NOVEMBER 2011 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)

Date: 18/07/2018 Page 1803. I.S. EN ISO 5173:2010/A1:2011 Date published 14 NOVEMBER 2011 Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd 1:2011) 1804. S.R. CEN/TR 10354:2011 Date published 14 NOVEMBER 2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry 1805. I.S. EN 13038:2011 Date published 14 NOVEMBER 2011 Soil improvers and growing media - Determination of electrical conductivity 1806. I.S. EN 4644-133:2011 Date published 14 NOVEMBER 2011 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 133: Size 3 receptacle for rack and panel application - Product standard 1807. I.S. EN 2824:2011 Date published 14 NOVEMBER 2011 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media 1808. I.S. EN ISO 7783:2011 Date published 17 NOVEMBER 2011 Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) 1809. I.S. EN 16086-1:2011 Date published 14 NOVEMBER 2011 Soil improvers and growing media - Determination of plant response - Part 1: Pot growth test with Chinese cabbage 1810. I.S. EN 16087-1:2011 Date published 14 NOVEMBER 2011 Soil improvers and growing media - Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR) 1811. I.S. EN ISO 4753:2011 Date published 14 NOVEMBER 2011 Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011) 1812. I.S. EN 3844-3:2011 Date published 14 NOVEMBER 2011 Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration 1813. I.S. EN 4644-141:2011 Date published 14 NOVEMBER 2011 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications - Product standard 1814. I.S. EN 4644-003:2011 Date published 14 NOVEMBER 2011 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 003: Rectangular inserts - Product standard Date: 18/07/2018 Page 1815. S.R. CEN ISO/TS 14907-2:2011 Date published 14 NOVEMBER 2011 Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface (ISO/TS 14907-2:2011) 1816. I.S. EN 3310:2011 Date published 14 NOVEMBER 2011 Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De ≤ 360 mm 1817. I.S. EN 13041:2011 Date published 14 NOVEMBER 2011 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space 1818. I.S. EN 15022-4:2011 Date published 14 NOVEMBER 2011 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) 1819. I.S. EN ISO 13503-1:2011 Date published 14 NOVEMBER 2011 Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids (ISO 13503-1:2011) 1820. I.S. EN 3844-1:2011 Date published 14 NOVEMBER 2011 Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation 1821. I.S. EN 4644-131:2011 Date published 14 NOVEMBER 2011 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 131: Size 3 plug for rack and panel applications - Product standard 1822. S.R. CEN/TR 10353:2011 Date published 14 NOVEMBER 2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry 1823. I.S. EN 13037:2011 Date published 14 NOVEMBER 2011 Soil improvers and growing media - Determination of pH 1824. I.S. EN 16087-2:2011 Date published 14 NOVEMBER 2011 Soil improvers and growing media - Determination of the aerobic biological activity - Part 2: Self heating test for compost 1825. I.S. EN 1564:2011 Date published 14 NOVEMBER 2011 Founding - Ausferritic spheroidal graphite cast irons 1826. I.S. EN 12952-5:2011 Date published 14 NOVEMBER 2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler

Date: 18/07/2018 Page 1827. I.S. EN 16075:2011 Date published 14 NOVEMBER 2011 Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) 1828. I.S. EN 15150:2011 Date published 14 NOVEMBER 2011 Solid biofuels - Determination of particle density 1829. I.S. EN ISO 3450:2011 Date published 14 NOVEMBER 2011 Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011) 1830. I.S. EN 16086-2:2011 Date published 14 NOVEMBER 2011 Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress 1831. I.S. EN ISO 15378:2011 Date published 14 NOVEMBER 2011 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2011) 1832. I.S. EN 3844-2:2011 Date published 14 NOVEMBER 2011 Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation 1833. I.S. EN ISO 8536-5:2011 Date published 17 NOVEMBER 2011 Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed (ISO 8536-5:2004) 1834. I.S. EN 1458-2:2011 Date published 17 NOVEMBER 2011 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy 1835. I.S. EN ISO 18113-1:2011/LC:2011-11 Date published 17 NOVEMBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) 1836. I.S. EN 13039:2011 Date published 17 NOVEMBER 2011 Soil improvers and growing media - Determination of organic matter content and ash 1837. I.S. EN 15359:2011 Date published 17 NOVEMBER 2011 Solid recovered fuels - Specifications and classes 1838. S.R. CEN/TR 16176:2011 Date published 17 NOVEMBER 2011 Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification

Date: 18/07/2018 Page 1839. I.S. EN 16109:2011 Date published 17 NOVEMBER 2011 Fertilizers - Determination of complexed micro-nutrient ions in fertilizers - Identification of lignosulfonates 1840. I.S. EN ISO 18113-2:2011/LC:2011-11 Date published 17 NOVEMBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2009) 1841. I.S. EN 10245-5:2011/LC:2011-11 Date published 17 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire 1842. I.S. EN 10257-1:2011/LC:2011-11 Date published 17 NOVEMBER 2011 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables 1843. I.S. EN ISO 18113-3:2011/LC:2011-11 Date published 17 NOVEMBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2009) 1844. I.S. EN ISO 18113-5:2011/LC:2011-11 Date published 17 NOVEMBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009) 1845. I.S. EN ISO 12137:2011/LC:2011-11 Date published 17 NOVEMBER 2011 Paints and varnishes - Determination of mar resistance (ISO 12137:2011) 1846. I.S. EN 10245-2:2011/LC:2011-11 Date published 17 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire 1847. S.R. CWA 16373:2011 Date published 17 NOVEMBER 2011 Best practice approach for electromagnetic induction (EMI) measurements of the near surface 1848. I.S. EN 12245:2009+A1:2011 Date published 17 NOVEMBER 2011 Transportable gas cylinders - Fully wrapped composite cylinders 1849. I.S. EN ISO 1518-2:2011/LC:2011-11 Date published 17 NOVEMBER 2011 Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011) 1850. I.S. EN ISO 18857-2:2011 Date published 17 NOVEMBER 2011 Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic- mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation (ISO 1851. I.S. EN ISO 18113-4:2011/LC:2011-11 Date published 17 NOVEMBER 2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009)

Date: 18/07/2018 Page 1852. I.S. EN 10245-4:2011/LC:2011-11 Date published 17 NOVEMBER 2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire 1853. I.S. EN 10257-2:2011/LC:2011-11 Date published 17 NOVEMBER 2011 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables 1854. I.S. EN 15978:2011 Date published 17 NOVEMBER 2011 Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method 1855. I.S. EN 16018:2011 Date published 17 NOVEMBER 2011 Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays 1856. I.S. EN 12566-4:2007/NA:2011 Date published 18 NOVEMBER 2011 Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits 1857. I.S. EN 12566-1:2000/NA:2011 Date published 18 NOVEMBER 2011 Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks 1858. I.S. EN 12566-3:2005+A1:2009/NA:2011 Date published 18 NOVEMBER 2011 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants 1859. I.S. EN 60684-3-116:2011 Date published 22 NOVEMBER 2011 Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3 -116:2010 (EQV)) 1860. I.S. EN 61378-1:2011 Date published 22 NOVEMBER 2011 Convertor transformers -- Part 1: Transformers for industrial applications (IEC 61378 -1:2011 (EQV)) 1861. I.S. EN 60603-7:2009/A1:2011 Date published 22 NOVEMBER 2011 Connectors for electronic equipment -- Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2008/A1:2011 (EQV)) 1862. I.S. EN 140401-804:2011/AC:2011 Date published 22 NOVEMBER 2011 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 1863. I.S. EN 60115-1:2011 Date published 21 NOVEMBER 2011 Fixed resistors for use in electronic equipment -- Part 1: Generic specification (IEC 60115-1:2008 (MOD))

Date: 18/07/2018 Page 1864. I.S. EN 50516-2-1:2011 Date published 21 NOVEMBER 2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications -- Part 2-1: Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and 1865. I.S. EN 50516-1-1:2011 Date published 21 NOVEMBER 2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications -- Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3 1866. I.S. EN 60076-1:2011 Date published 21 NOVEMBER 2011 Power transformers -- Part 1: General (IEC 60076-1:2011 (EQV)) 1867. I.S. EN 60695-11-4:2011 Date published 21 NOVEMBER 2011 Fire hazard testing -- Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method (IEC 60695-11-4:2011 (EQV)) 1868. I.S. HD 60364-7-701:2007/A11:2011 Date published 21 NOVEMBER 2011 Low-voltage electrical installations -- Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower 1869. I.S. EN 50533:2011 Date published 23 NOVEMBER 2011 Railway applications - Three-phase train line voltage characteristics 1870. I.S. EN 50342-1:2006/A1:2011 Date published 23 NOVEMBER 2011 Lead-acid starter batteries -- Part 1: General requirements and methods of test 1871. I.S. EN 61970-301:2011 Date published 23 NOVEMBER 2011 Energy management system application program interface (EMS-API) -- Part 301: Common information model (CIM) base (IEC 61970-301:2011 (EQV)) 1872. I.S. EN 60068-3-1:2011 Date published 23 NOVEMBER 2011 Environmental testing -- Part 3-1: Supporting documentation and guidance - Cold and dry heat tests (IEC 60068-3-1:2011 (EQV)) 1873. I.S. EN 62442-1:2011 Date published 23 NOVEMBER 2011 Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear (IEC 62442-1:2011 (EQV)) 1874. I.S. EN 61386-25:2011 Date published 23 NOVEMBER 2011 Conduit systems for cable management -- Part 25: Particular requirements - Conduit fixing devices (IEC 61386-25:2011 (EQV)) 1875. I.S. EN 61937-1:2007/A1:2011 Date published 23 NOVEMBER 2011 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 1: General (IEC 61937-1:2007/A1:2011 (EQV))

Date: 18/07/2018 Page 1876. I.S. EN ISO 22476-3:2005/A1:2011 Date published 28 NOVEMBER 2011 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd 1:2011) 1877. I.S. EN ISO 534:2011 Date published 28 NOVEMBER 2011 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) 1878. I.S. EN ISO 15927-5:2004/A1:2011 Date published 28 NOVEMBER 2011 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927 -5:2004/Amd 1:2011) 1879. I.S. EN ISO 11850:2011 Date published 28 NOVEMBER 2011 Machinery for forestry - General safety requirements (ISO 11850:2011) 1880. I.S. EN ISO 28017:2011 Date published 14 DECEMBER 2011 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011) 1881. I.S. EN ISO 22432:2011 Date published 28 NOVEMBER 2011 Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) 1882. I.S. EN ISO 9241-303:2011 Date published 28 NOVEMBER 2011 Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2011) 1883. S.R. CEN ISO/TS 22391-7:2011 Date published 28 NOVEMBER 2011 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011) 1884. I.S. EN ISO 1043-1:2011 Date published 28 NOVEMBER 2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011) 1885. I.S. EN ISO 1043-2:2011 Date published 28 NOVEMBER 2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) 1886. I.S. EN ISO 22476-2:2005/A1:2011 Date published 28 NOVEMBER 2011 Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing - Amendment 1 (ISO 22476-2:2005/Amd 1:2011) 1887. I.S. EN ISO 19011:2011 Date published 28 NOVEMBER 2011 Guidelines for auditing management systems (ISO 19011:2011)

Date: 18/07/2018 Page 1888. I.S. EN ISO 2431:2011 Date published 28 NOVEMBER 2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) 1889. I.S. EN 152:2011 Date published 28 NOVEMBER 2011 Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method 1890. I.S. EN 16079:2011 Date published 28 NOVEMBER 2011 Founding - Compacted (vermicular) graphite cast irons 1891. I.S. EN 13126-3:2011 Date published 28 NOVEMBER 2011 Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware 1892. I.S. EN 15961:2011 Date published 28 NOVEMBER 2011 Fertilizers - Extraction of water-soluble calcium, magnesium, sodium and sulfur in the form of sulfates 1893. I.S. EN 15759-1:2011 Date published 28 NOVEMBER 2011 Conservation of cultural property - Indoor climate - Part 1: Guidelines for heating churches, chapels and other places of worship 1894. I.S. EN 15906:2011 Date published 28 NOVEMBER 2011 Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity 1895. I.S. EN 12680-3:2011 Date published 28 NOVEMBER 2011 Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings 1896. I.S. EN 1458-1:2011 Date published 28 NOVEMBER 2011 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety 1897. I.S. EN 3475-603:2011/AC:2011 Date published 28 NOVEMBER 2011 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking 1898. I.S. EN 1371-1:2011 Date published 28 NOVEMBER 2011 Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings 1899. I.S. EN 13126-1:2011 Date published 28 NOVEMBER 2011 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware 1900. I.S. EN 15958:2011 Date published 28 NOVEMBER 2011 Fertilizers - Extraction of water soluble phosphorus

Date: 18/07/2018 Page 1901. I.S. EN 15959:2011 Date published 28 NOVEMBER 2011 Fertilizers - Determination of extracted phosphorus 1902. I.S. EN 13126-5:2011 Date published 28 NOVEMBER 2011 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows 1903. I.S. EN 30-1-1:2008+A2:2010/AC:2011 Date published 28 NOVEMBER 2011 Domestic cooking appliances burning gas - Part 1-1: Safety - General 1904. I.S. EN 16192:2011 Date published 28 NOVEMBER 2011 Characterization of waste - Analysis of eluates 1905. I.S. EN 1172:2011 Date published 28 NOVEMBER 2011 Copper and copper alloys - Sheet and strip for building purposes 1906. I.S. EN 1090-1:2009+A1:2011 Date published 28 NOVEMBER 2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components 1907. I.S. EN 15960:2011 Date published 28 NOVEMBER 2011 Fertilizers - Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates 1908. I.S. EN 16004:2011 Date published 28 NOVEMBER 2011 Chemicals used for treatment of water intended for human consumption - Magnesium oxide 1909. I.S. EN 16003:2011 Date published 28 NOVEMBER 2011 Chemicals used for treatment of water intended for human consumption - Calcium magnesium carbonate 1910. I.S. EN 16124:2011 Date published 28 NOVEMBER 2011 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications 1911. I.S. EN 61394:2011 Date published 30 NOVEMBER 2011 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors (IEC 61394:2011 (EQV)) 1912. I.S. EN 61821:2011 Date published 30 NOVEMBER 2011 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits (IEC 61821:2011 (EQV)) 1913. I.S. EN 61029-2-5:2011 Date published 30 NOVEMBER 2011 Safety of transportable motor-operated electric tools -- Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 (MOD) + A1:2001 (MOD))

Date: 18/07/2018 Page 1914. I.S. EN 16064:2011 Date published 12 DECEMBER 2011 Packaging - Rigid plastic containers - PET finish 30/25 High (18,5) 1915. I.S. EN 16065:2011 Date published 12 DECEMBER 2011 Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8) 1916. S.R. CEN/TR 16298:2011 Date published 12 DECEMBER 2011 Textiles and textile products - Smart textiles - Definitions, categorisation, applications and standardization needs 1917. I.S. EN ISO 20344:2011 Date published 20 DECEMBER 2011 Personal protective equipment - Test methods for footwear (ISO 20344:2011) 1918. S.R. CEN/TS 15548-1:2011 Date published 12 DECEMBER 2011 Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 °C to 850 °C 1919. I.S. EN 2240-100:2011 Date published 12 DECEMBER 2011 Aerospace series - Lamps, incandescent - Part 100: Lamp, code 2078 - Product standard 1920. I.S. EN 14844:2006+A2:2011 Date published 14 DECEMBER 2011 Precast concrete products - Box culverts 1921. S.R. CWA 16387:2011 Date published 12 DECEMBER 2011 Clean Harbours - Guidelines 1922. I.S. EN 16067:2011 Date published 12 DECEMBER 2011 Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00) 1923. I.S. EN ISO 23640:2011 Date published 20 DECEMBER 2011 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) 1924. I.S. EN ISO 13706:2011 Date published 20 DECEMBER 2011 Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011) 1925. I.S. EN ISO 11680-2:2011 Date published 20 DECEMBER 2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) 1926. I.S. EN 2240-101:2011 Date published 12 DECEMBER 2011 Aerospace series - Lamps, incandescent - Part 101: Lamp, code 404-02 - Product standard

Date: 18/07/2018 Page 1927. I.S. EN 4165-025:2011 Date published 12 DECEMBER 2011 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 025: Module receptacle - Product Norm 1928. I.S. EN 15997:2011 Date published 12 DECEMBER 2011 All terrain vehicles (ATVs - Quads) - Safety requirements and test methods 1929. I.S. EN ISO 11680-1:2011 Date published 20 DECEMBER 2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) 1930. I.S. EN 15194:2009+A1:2011 Date published 14 DECEMBER 2011 Cycles - Electrically power assisted cycles - EPAC Bicycles 1931. I.S. EN ISO 19901-6:2009/AC:2011 Date published 20 DECEMBER 2011 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations - Technical Corrigendum 1 (ISO 19901-6:2009/Cor 1:2011) 1932. I.S. EN ISO 11681-1:2011 Date published 20 DECEMBER 2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) 1933. I.S. EN ISO 10619-3:2011 Date published 20 DECEMBER 2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) 1934. I.S. EN 6059-100:2011 Date published 12 DECEMBER 2011 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General 1935. I.S. EN 16091:2011 Date published 12 DECEMBER 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method 1936. I.S. EN 16063:2011 Date published 12 DECEMBER 2011 Packaging - Rigid plastic containers - Nomenclature of plastic finishes 1937. I.S. EN 16066:2011 Date published 12 DECEMBER 2011 Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35) 1938. I.S. EN 16068:2011 Date published 12 DECEMBER 2011 Packaging - Rigid plastic containers - PET finish 38 1939. I.S. EN ISO 14405-2:2011 Date published 20 DECEMBER 2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) 1940. I.S. EN 16032:2011 Date published 12 DECEMBER 2011 Fertilizers - Extraction and determination of elemental sulfur

Date: 18/07/2018 Page 1941. I.S. EN ISO 14719:2011 Date published 20 DECEMBER 2011 Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) 1942. I.S. EN ISO 25539-3:2011 Date published 20 DECEMBER 2011 Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539 -3:2011) 1943. I.S. EN 13024-1:2011 Date published 12 DECEMBER 2011 Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description 1944. I.S. EN 1863-1:2011 Date published 12 DECEMBER 2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description 1945. I.S. EN ISO 11681-2:2011 Date published 20 DECEMBER 2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) 1946. I.S. EN ISO 10619-2:2011 Date published 20 DECEMBER 2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011) 1947. I.S. EN ISO 14087:2011 Date published 20 DECEMBER 2011 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011) 1948. I.S. EN ISO 11806-1:2011 Date published 20 DECEMBER 2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand- held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) 1949. I.S. EN ISO 11806-2:2011 Date published 20 DECEMBER 2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand- held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back- pack power unit (ISO 11806-2:2011) 1950. I.S. EN ISO 10619-1:2011 Date published 20 DECEMBER 2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011) 1951. I.S. EN 62549:2011 Date published 16 DECEMBER 2011 Articulated systems and flexible systems for cable guiding (IEC 62549:2011 (EQV)) 1952. I.S. EN 50557:2011 Date published 16 DECEMBER 2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs- RCCBs for household and similar uses

Date: 18/07/2018 Page 1953. I.S. EN 60794-1-1:2011 Date published 16 DECEMBER 2011 Optical fibre cables -- Part 1-1: Generic specification - General (IEC 60794-1-1:2011 (EQV)) 1954. I.S. EN 61937-2:2007/A1:2011 Date published 16 DECEMBER 2011 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 2: Burst-info (IEC 61937-2:2007/A1:2011 (EQV)) 1955. I.S. EN 60745-2-4:2009/A11:2011 Date published 16 DECEMBER 2011 Hand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for sanders and polishers other than disk type 1956. I.S. EN 60730-2-7:2010/AC:2011 Date published 16 DECEMBER 2011 Automatic electrical controls for household and similar use -- Part 2-7: Particular requirements for timers and time switches 1957. I.S. EN 50411-3-3:2011 Date published 19 DECEMBER 2011 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 3-3: Singlemode optical fibre fusion splice protectors 1958. I.S. EN 62541-4:2011 Date published 19 DECEMBER 2011 OPC unified architecture -- Part 4: Services (IEC 62541-4:2011 (EQV)) 1959. I.S. EN 62541-5:2011 Date published 19 DECEMBER 2011 OPC unified architecture -- Part 5: Information model (IEC 62541-5:2011 (EQV)) 1960. I.S. EN 62541-6:2011 Date published 19 DECEMBER 2011 OPC unified architecture -- Part 6: Mappings (IEC 62541-6:2011 (EQV)) 1961. I.S. EN 62541-8:2011 Date published 19 DECEMBER 2011 OPC unified architecture -- Part 8: Data Access (IEC 62541-8:2011 (EQV)) 1962. I.S. EN 50467:2011 Date published 19 DECEMBER 2011 Railway applications - Rolling stock - Electrical connectors, requirements and test methods 1963. I.S. EN 61850-9-2:2011 Date published 19 DECEMBER 2011 Communication networks and systems for power utility automation -- Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 (IEC 61850-9-2:2011 (EQV)) 1964. I.S. EN 50377-16-1:2011 Date published 19 DECEMBER 2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C

Date: 18/07/2018 Page 1965. I.S. EN 50443:2011 Date published 19 DECEMBER 2011 Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems 1966. I.S. EN 16136:2011 Date published 20 DECEMBER 2011 Automotive fuels - Determination of manganese content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method 1967. I.S. EN 16135:2011 Date published 20 DECEMBER 2011 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS) 1968. I.S. EN 1930:2011 Date published 20 DECEMBER 2011 Child use and care articles - Safety barriers - Safety requirements and test methods 1969. I.S. EN 13445-4:2009/A1:2011 Date published 20 DECEMBER 2011 Unfired pressure vessels - Part 4: Fabrication 1970. I.S. EN 1971-2:2011 Date published 20 DECEMBER 2011 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface 1971. I.S. EN 13523-20:2011 Date published 20 DECEMBER 2011 Coil coated metals - Test methods - Part 20: Foam adhesion 1972. I.S. EN 1971-1:2011 Date published 20 DECEMBER 2011 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface 1973. I.S. EN 16090:2011 Date published 20 DECEMBER 2011 Copper and copper alloys - Estimation of average grain size by ultrasound 1974. I.S. EN 13523-17:2011 Date published 20 DECEMBER 2011 Coil coated metals - Test methods - Part 17: Adhesion of strippable films 1975. I.S. EN 16027:2011 Date published 20 DECEMBER 2011 Protective clothing - Gloves with protective effect for association football goal keepers 1976. I.S. EN 1034-3:2011 Date published 20 DECEMBER 2011 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders 1977. I.S. EN 60534-8-2:2011 Date published 21 DECEMBER 2011 Industrial-process control valves -- Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:2011 (EQV))

Date: 18/07/2018 Page 1978. I.S. EN 61000-3-12:2011 Date published 21 DECEMBER 2011 Electromagnetic compatibility (EMC) -- Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase (IEC 61000-3-12:2011 (EQV)) 1979. I.S. EN 60335-2-53:2011 Date published 21 DECEMBER 2011 Household and similar electrical appliances - Safety -- Part 2-53: Particular requirements for sauna heating appliances and infrared cabins (IEC 60335-2-53:2011 (EQV)) 1980. I.S. EN 60704-2-10:2011 Date published 21 DECEMBER 2011 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise -- Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these (IEC 60704-2-10:2011 (EQV)) 1981. I.S. EN 61788-15:2011 Date published 21 DECEMBER 2011 Superconductivity -- Part 15: Electronic characteristic measurements -- Intrinsic surface impedance of superconductor films at microwave frequencies (IEC 61788-15:2011 (EQV)) 1982. I.S. EN 60475:2011 Date published 21 DECEMBER 2011 Method of sampling insulating liquids (IEC 60475:2011 (EQV)) 1983. I.S. EN 60567:2011 Date published 21 DECEMBER 2011 Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance (IEC 60567:2011 (EQV)) 1984. I.S. HD 60364-5-56:2010/A1:2011 Date published 21 DECEMBER 2011 Low-voltage electrical installations -- Part 5-56: Selection and erection of electrical equipment - Safety services 1985. S.R. CLC/TR 50491-6-3:2011 Date published 21 DECEMBER 2011 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 6-3: HBES installations - Assessment and definition of levels 1986. S.R. CEN/CLC/ETSI/TR 50572:2011 Date published 21 DECEMBER 2011 Functional reference architecture for communications in smart metering systems 1987. I.S. EN ISO 11148-10:2011 Date published 20 DECEMBER 2011 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) 1988. I.S. EN ISO 11148-1:2011 Date published 20 DECEMBER 2011 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) 1989. I.S. EN ISO 11148-11:2011 Date published 20 DECEMBER 2011 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)

Date: 18/07/2018 Page 1990. I.S. EN ISO 11148-5:2011 Date published 20 DECEMBER 2011 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) 1991. I.S. EN ISO 11148-2:2011 Date published 20 DECEMBER 2011 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011) 1992. I.S. EN ISO 11148-8:2011 Date published 20 DECEMBER 2011 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) 1993. S.R. CEN ISO/TS 10272-3:2010/AC:2010 Date published 20 DECEMBER 2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) 1994. I.S. EN ISO 1133-1:2011 Date published 20 DECEMBER 2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) 1995. I.S. EN ISO 1133-2:2011 Date published 20 DECEMBER 2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011) 1996. I.S. EN ISO 11148-9:2011 Date published 20 DECEMBER 2011 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) 1997. I.S. EN ISO 6185-4:2011 Date published 15 JULY 2011 Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) 1998. I.S. EN 1991-1-7:2006+AC:2010+NA:2010+A1:2010+AC:2011 Date published 26 MAY 2011 Eurocode 1 - Actions on structures - Part 1-7: General actions Accidental actions (Including Irish National Annex) 1999. I.S. EN 1717:2000+NA:2011 Date published 14 JULY 2011 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow 2000. I.S. EN 12566-1:2000+NA:2011 Date published 18 NOVEMBER 2011 Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks 2001. I.S. EN 12566-3:2005+A1:2009+NA:2011 Date published 18 NOVEMBER 2011 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants

Date: 18/07/2018 Page 2002. I.S. EN 12566-4:2007+NA:2011 Date published 18 NOVEMBER 2011 Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits 2003. I.S. EN 12566-1:2000+A1:2003+NF:2015 Date published 18 NOVEMBER 2011 Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks 2004. I.S. ETSI EN 300 440-2 V1.4.1 (2010-08) Date published 31 MAY 2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

Date: 18/07/2018 Page