DOCSLIB.ORG

Though There Are Some Standards Listed Below Available for Free, Many of the Documents in This List Are Addenda, Erratum Or Corrigenda

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

Though there are some standards listed below available for free, many of the documents in this list are addenda, erratum or corrigenda. Title Abstract AAMI Standards Program National and Internation NONE Guidance for ANSI/AAMI/ISO 11607, Packaging for terminally sterilized medic Amendment 1 to ANSI/AAMI EC53:1995, AmericanNONE N Enteral feeding set adapters and connectors Specifies safety requireme Erratum- Active implantable medical devices - Electromagnetic compatibility - Underground dielectric optical fiber cable [T Especifica os requisitos m Educational Information About Carbon Monoxide This technical information Certified Ratings Program - Product Rating Manual The program applies to aco Certified Ratings Program Operating Manual (Rev. The purpose of the AMCA In Laboratory Accreditation Program The purpose of the AMCA La Certified Ratings Program - Product Rating ManualThe purpose of this manual Certified Ratings Program - Product Rating Man The purpose of the program Certified Ratings Program - Product Rating Manua The purpose of this manual Certified Ratings Program - Product Rating ManualThis publication is an exte The Financial Impact of Cyber Security - Questio <p><i>The Financial Impac The Financial Management of Cyber Risk: An Imp <p><i> The Financial Mana IDSP Workshop Report: Identity Verification Identity Verification, a wo IDSP Workshop Report: Measuring Identity Theft Measuring Identity Theft, Forced-Circulation Air-Cooling and Air-Heating Coils - Addendum 1 Erratum - American National Standard Technical InfNONE Technical Corrigendum to X9.58-2007 Financial tra This technical corrigendum FAQ on X9's TG-3 FAQ on X9's TG-3 TG-3 Retail Financial Services Compliance Guidel This guideline applies to a X9 BAI Version 2 Cash Management Balance Reporting The corrections listed in this errata sheet apply to ANSI/ASHRAE Standard 25- Organizational Resilience: Security, Preparednes A comprehensive management Update #1 to Enameled Cast Iron and Steel PlumbiUpdate #1 :This Standard c Addenda to a current standard- Suction Fittings f This Standard establishes m Errata to ASME B89.1.17-2001, Measurement of Thread Measuring Wires Definitions and Nomenclature Used for Fall ProtectiThis standard establishes t Standard Termninology Relating to Nanotechnolog <p>1.1 Nanotechnology is an Standard Specification for <span class="italic">Fel <p id="s00002">1.1 This sp The NIIF Interconnection Template (Network Interc The purpose of this docume NIIF Reference Document Part V - Attachment A -TeThe purpose of this documen NIIF Reference Document Part VI - Network ManagThe purpose of this docume NIIF Reference Document Part VI - Attachment A - The purpose of this docume NIIF Reference Document Part XIII - Terms and DefThe purpose of this docume NIIF Intercompany Responsibilities Within the Tel This document is intended 555 Technical Service Interconnection Agreements This document identifies po Wireless Interconnection Types and Dial Patterns Formerly NIIF-0011, Cellula Guidelines for Reporting Local Number Portability This document is intended a Telecommunications Relay Service (TRS) This paper presents the cur EDI Guideline Section 10.4 Section 10.4, Telecommunic Local Service Migration Guidelines (LSMG) Issue 3This document describes var EDI Service Order Issue 10 This document contains gene EDI Service Order Guidelines Issue 6 This guideline is to enhan Telecommunications Interchange Markup (TIM), RelThis document defines and Electronic Interchange of Nontext Objects, Part 1: This document recommends f Telecommunications Electronic Document Delivery This document defines and X.25 Network Specifications for Electronic BondingThis document provides the CORBA Implementation Profile for Electronic Com This document profiles th EDI Billing Guidelines Issue 9, Revision 1 This guideline provides a Telecom Non-Repudiation Inter-ORB Protocol This document specifies t Generic Guidelines for the use of TCP/IP inElectro This document outline a re Admonishments (Safety-Related Warning MessageThis is a guideline for imp Generic Implementation Guidelines for ANSI T1.26 Provides detailed descrip AWS B5.15:2003-AMD1- Amendment Sheet NONE AWS QC1:2006 Standard for AWS Certification of This standard defines the r AWS QC17 - Standard for Accreditation of WeldingThis Standard establishes AWS QC19 - Standard for the AWS Certification of This standard defines the c AWS QC4-89 - Standard for Accreditation of Test FThis Standard describes a p AWS QC5-91 - Standard for Certification of Weldi This Standard describes a AWS QC7-93 - Standard for AWS Certified This standard describes a Transportable gas container valves. Valves with taper stems for use with brea Safety requirements for electrical equipment for measurement, control, and lab Guidance on the labelling of manufactured nanoparticles and products contai Terminology for medical, health and personal care applications of nanotechno Terminology for the bio-nano interface Terminology for common nanoscale measurement and instrumentation Terminology for carbon nanostructures Terminology for nanofabrication Terminology for nanomaterials Official identification eartags for sheep and goats. Specification Regenerative medicine. Glossary Nanotechnologies. Good practice guide for specifying manufactured nanomate Nanotechnologies. Guide to safe handling and disposal of manufactured nano Gas-Fired Pool Heaters -Erratum Erratum Erratum to Z21.58-2007/CSA 1.6-2007, Outdoor Cooking Gas Appliances Outdoor Cooking Gas Appliances -Erratum Erratum Outdoor Cooking Specialty Gas Appliances - Erra Errata Erratum to ANSI Z83.11-2006/CSA 1.8-2006 Gas FNONE Gas-Fired Construction Heaters - Erratum Erratum Update 2 to A112.18.1-05/CAN/CSA-B125.1-05 PlumNONE Stainless steel plumbing fixtures Update 1 Update 2 to C22.2 NO. 24-93, Temperature-Indicating and -Regulating Equip Update #1 to C22.2 NO. 250.0-08, Luminaires (Tri update #1 Update #2 to C22.2 NO. 46-M1988, Electric Air-He Update Only Update #1 to C22.2 NO. 52-09, Underground seconupdate #1 Portable power cables - Update #1 to C22.2 NO. 9 This PDF includes update Update No. 3 to C22.2 NO. 42-99, General Use RecThis PDF includes Updates Update #3 to C22.2 NO. 100-04 (R2009) Motors a Updates #1, 2 and 3. Update #4 to CAN/CSA-C22.2 NO. 188-04 (R2009)Update S #4 Update #2 to CAN/CSA-C22.2 NO. 223-M91 (R2008)Update #2 Update #3 to C22.2 NO. 46-M1988 (R2006) ElectriThis PDF includes updates Update #4 to CAN/CSA-C22.2 NO. 65-03 (R2008) WUpdate #4 Update #1 to C22.2 NO. 68-09 Motor-operated appUpdate #1 Update #1 to CAN/CSA-C742-08 PDF Energy perforUpdate #1 Update #2 to CAN/CSA-S406-92 (R2008) ConstrucThis PDF includes update Update #1 to CAN/CSA-Z15883-1-09, Washer-disinfecUpdate #1. Recreational alpine skiing and snowboarding hel Update #1 Update #1 to Z314.8-08 PDF Decontamination of Update #1 Update 3 to CAN/CSA-A220 Series-06, Concrete Roof Tiles Update No. 2 to CAN/CSA-A220 Series-06, ConcretUpdate No. 2 was published Update No. 2 to A23.3-04, Design of Concrete StruNONE Udate #3 to CAN/CSA-A23.3-04 Design of ConcreteUpdate #2 was published as Update 3 to Masonry Construction for Buildings Update No. 2 was published Update No. 1 to A82-06, Fired Masonry Brick MadeNONE Update No. 1 to B128.1-06/B128.2-06, Design and Amendment Update No. 2 to CAN/CSA-B140.4-04, Oil-Fired WaUpdate No. 1 was published Update No. 1 to CAN/CSA-B149.1-05, Natural Gas NONE Update #4 to CAN/CSA-B1800-06, Thermoplastic NoUpdate Only Update No. 4 to CAN/CSA-B45 Series-02, PlumbingUpdate No. 2 was published Update 1 to CAN/CSA-B651-04 Accessible Design NONEf Update #1 to CAN/CSA-B659-08, Inclusive Design Updatef Only Cast Iron Soil Pipe, Fittings, and Means of Joining <p>This Standard covers cas Update 1 to CAN/CSA-C2.2-06 Pole-Mounted, Single-NONE Bonding of Electrical Equipment Update to CSA C22.2 No. 0. Update #2 to CAN/CSA-C22.2 No. 107.2-01, Batte Update Only Update #3 to CAN/CSA-C22.2 No. 110-94, Construction and Test of Electric Update 3 to CAN/CSA-C22.2 No. 14-05, Industrial Control Equipment Update 1 to CAN/CSA-C22.2 NO. 144.1-06 Ground-FaNONE Metallic Outlet Boxes (Tri-National standard, w This PDF includes updates Update #4 to CAN/CSA-C22.2 NO. 18.3-04, Conduit,Includes Updates No. 1, 2, Hardware for the Support of Conduit, Tubing, and CUpdate Update 1 to CAN/CSA-C22.2 NO. 227.1-06 ElectricaNONE Update #2 to CAN/CSA-C22.2 NO. 227.3-05, Nonmetallic Mechanical Protectio Update #2 to CAN/CSA-C22.2 No. 236-05, Heating and Cooling Equipment (Bi- Update 1 to CAN/CSA-C22.2 NO. 2556-05 Wire andNONE Update 1 to C22.2 NO. 2556-07, Wire and Cable Test Methods (Tri-National Update 2 to CAN/CSA-C22.2 NO. 38-05 Thermoset-INONE Molded-Case Circuit Breakers, Molded-Case SwitchUpdate Update #1 to CAN/CSA-C22.2 NO. 60745-1-07, Hand-update #1 Safety Requirements for Electrical Equipment for Update #1 to CAN/CSA-C22. Update #3 to CAN/CSA-C22.2 No. 65-03, Wire ConUpdate No. 1 was published Update 1 to C22.2 NO. 94.1-07, Enclosures for Electrical Equipment, Non-En Update 1 to C22.2 NO. 94.2-07, Enclosures for Electrical Equipment, Enviro Update #2 to CAN/CSA-C22.2 No.188-04, Splicing Update No. 2 was published Update #2 to CAN/CSA-C22.2 NO.198.2-05, SealedUpdate #1 was published as Update No. 2 Conduit, Tubing, and Cable Fittings NONE Update No. 2 to CAN/CSA-C22.2 NO. 188-04, SpliNONE Update No. 1 Extruded Insulating Tubing (Bi-NationNONE Update No. 1 Sealed Wire Connector Systems (Tri NONE Update No. 1 Coated Electrical Sleeving (Bi-NationNONE Update No. 1 to C22.2 NO. 4248.1-07, FuseholdersUpdate No. 1 was published Update No. 1 to C22.2 NO.
Recommended publications
  • Smart Container Business Requirements Specifications (BRS)

    Smart Container Business Requirements Specifications (BRS)

    Final September 2019 UNITED NATIONS ECONOMIC COMMISSION FOR EUROPE UNITED NATIONS CENTRE FOR TRADE FACILITATION AND ELECTRONIC BUSINESS (UN/CEFACT) BUSINESS REQUIREMENTS SPECIFICATION (BRS) Smart Containers Approved: UN/CEFACT Bureau on 30 September 2019 Version: 1.0 1. Introduction The aim of this document is to define the data elements required for a Smart Container Solution. First, we will detail use cases to share a common understanding of the potential of the Smart Container Solutions and then derive the data elements. We will use the existing data elements of the UN/CEFACT Core Components Library (CCL), in particular, the Multi-Modal Transport (MMT) subset, a.k.a. the MMT Reference Data Model. Whenever new data elements are needed, they will be included in the CCL and the MMT subset. Depending on the use case, a different set of data elements may need to be transmitted to satisfy its Smart Container Solution. The use cases are prioritized and organized accordingly. The sum of all data elements for all use cases would provide all data that may be required in any message format used within the context of Smart Container Information Exchanges. The aim of this work is to define only WHAT may be exchanged among stakeholders and not the HOW this information may be exchanged (e.g. EDI, API, EPCIS). The message exchanged will contain only a subset of “the sum of all data elements”. Data governance and roles/credentials-based access to the smart containers’ data elements are part of the terms of contracts in place between the smart containers’ service providers and the logistic chain stakeholders.
  • Definition of Object-Oriented FRBR

    Definition of Object-Oriented FRBR

    FRBR object-oriented definition and mapping from FRBRER, FRAD and FRSAD Document Type: Current Editorial Status: In Progress since [5/4/2017] Version 3.0 September 2017 International Working Group on FRBR and CIDOC CRM Harmonisation Supported by Delos NoE Editors: Chryssoula Bekiari Martin Doerr Patrick Le Bœuf Pat Riva Contributors: Trond Aalberg, Jérôme Barthélémy, Chryssoula Bekiari, Guillaume Boutard, Martin Doerr, Günther Görz, Dolores Iorizzo, Max Jacob, Carlos Lamsfus, Patrick Le Bœuf, Mika Nyman, João Oliveira, Christian Emil Ore, Allen H. Renear, Pat Riva, Richard Smiraglia, Stephen Stead, Maja Žumer, and others November 2015 Index INDEX ............................................................................................................................................... 2 FOREWORD ................................................................................................................................. 109 1. INTRODUCTION ..................................................................................................................... 1110 1.1. Purposes .................................................................................................................................................... 1110 1.1.1. A Common View of Cultural Heritage Information .......................................................................... 1211 1.1.2. A Verification of FRBR’s Internal Consistency ................................................................................ 1211 1.1.3. An Enablement of Information
  • Intelligent Transport Systems — Freight Land Conveyance Content Identification and Communication — Part 2: Application Interface Profiles

    Intelligent Transport Systems — Freight Land Conveyance Content Identification and Communication — Part 2: Application Interface Profiles

    This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 INTERNATIONAL ISO STANDARD 26683-2 First edition 2013-02-15 Intelligent transport systems — Freight land conveyance content identification and communication — Part 2: Application interface profiles Systèmes intelligents de transport — Identification et communication du contenu des marchandises transportées par voie terrestre — Partie 2: Profils d’interface d’application Reference number ISO 26683-2:2013(E) © ISO 2013 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 ISO 26683-2:2013(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form orthe by requester. any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of ISOTel. copyright+ 41 22 749 office 01 11 CaseFax + postale 41 22 749 56 •09 CH-1211 47 Geneva 20 Web www.iso.org E-mail [email protected] Published in Switzerland ii © ISO 2013 – All rights reserved This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 ISO 26683-2:2013(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv
  • Standards Publications

    Standards Publications

    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. 178:1973 Date published 28 SEPTEMBER 2005 Extruded Rigid PVC Corrugated Sheeting 2. I.S. EN 60835-1-2:1993 Date published 1 JUNE 2005 Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -- Section 2: Basic characteristics (IEC 60835-1-2:1992 (EQV)) 3. I.S. EN 160000:1993/A1:1996 Date published 1 JUNE 2005 Generic Specification: Modular electronic units 4. I.S. EN 61595-1:1999 Date published 1 JUNE 2005 Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use -- Part 1: Format A (IEC 61595-1:1997 (EQV)) 5. I.S. EN 1990:2002+NA:2010 Date published 24 MARCH 2005 Eurocode - Basis of structural design (including Irish National Annex) 6. I.S. EN ISO 14122-4:2004 Date published 23 FEBRUARY 2005 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) 7. I.S. EN 13877-1:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 1: Materials 8. I.S. EN 13877-2:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 2: Functional requirements for concrete pavements 9. I.S. EN 12843:2004 Date published 4 MARCH 2005 Precast concrete products - Masts and poles 10. I.S. EN 13225:2005 Date published 4 MARCH 2005 Precast concrete products - Linear structural elements 11. I.S. EN 13693:2004 Date published 4 MARCH 2005 Precast concrete products - Special roof elements 12.
  • काय-योजना Programme of Work उ पादन एवं सामा य इंजीिनय रंग वभ P

    काय-योजना Programme of Work उ पादन एवं सामा य इंजीिनय रंग वभ P

    काय-योजना (01अगत 2013) PROGRAMME OF WORK (As on 01 August 2013) PG 14 PG 13 PG 28 PG 33 PG 15 PG 23 PG 34 PG 25 PG 18 उपादन एवं सामाय इंजीिनयरंग वभाग (पी.जी.ड) Production & General Engineering Department(PGD) BUREAU OF INDIAN STA NDARDS MANAK BHWAN, 9 BAHADUR SHAH ZAFAR MARG New Delhi – 110002 1 P R E F A C E A Programme of Work is prepared every year for each Division of Bureau of Indian Standards to indicate the latest position of published Indian Standards and draft standards at different stages of processing. The Programme of Work for Production and General Engineering Division Council (PGDC) has been prepared Sectional Committee-wise as on 01 April 2013 and arranged in the sequential order of the Committee numbers. The present scope of Production and General Engineering Division Council (PGDC) is as under: “Production engineering and general engineering such as engineering drawings, screw threads, fasteners, transmission devices, weights and measures, engineering metrology, ergonomics, bearings and tribology, gears, horology, machine tools, hand tools, cutting tools, pneumatic tools, fluid power systems, meteorological instruments, mountaineering equipment, arms & ammunition for civilian use, automation in manufacturing and robotics and consumer products & allied equipment.” In the Programme of Work, an asterisk mark (*) given before a printed standard indicates that the standard is under revision and its relevant document is available at different stages of processing; whereas, double asterisk mark (**) indicates standard identified for revision for which document is yet to be prepared. Below the designation of a published standard, wherever ‘/ISO/IEC…..’ standard number is given , it implies that the Indian Standard is the total adoption of ISO/IEC standard under dual numbering scheme (The designations such as IS/ISO 9001:2000 also indicate dual number standards).
  • Container Logistics Glossary

    Container Logistics Glossary

    Container Logistics Glossary J&S Maritime Ltd J&S Maritime provide generic and bespoke training to stakeholders in the container terminal sector. They offer a unique blend of industry experience, applied knowledge and conceptual insight supported by academic rigour. Excelling in interactive classroom delivery and engaging eLearning courses through NowLearn.net they deliver best in class training content that engages attendees whether they are new to the industry or have decades of experience. Dr Jeff Martin Jeffrey Martin graduated with a BSc Honours degree in Maritime Studies and was awarded a PhD from the University of Wales for his research on strategic relationships in container terminal communities. He has over 25 years of international experience in the industry including periods in export shipping, project finance, software development and business consultancy. Jeffrey has a particular interest in terminal automation and in the education of port workers and frontline managers. He works with many global companies in the container sector delivering operational, management and executive training on behalf of terminal operators, technology providers and consultancy firms. For further details, visit: linkedin.com/in/jeffreymartin Dr Sally Martin Sally Martin is a co-founder of J&S Maritime Ltd and is a Professor at the Department of International Logistics, Chung-Ang University, Korea specializing in land transport and logistics. On graduating with a BSc Honours degree in International Transport she undertook at a PhD at the University of Wales assessing the potential for rail freight in the UK. Following 15 years in industry where she became Chief of Staff to a major UK engineering company supplying the offshore oil and gas sector she returned to academia in 2011.
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017)

    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017)

    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017) Technical Committee No. 1 “Quality assurance and social responsibility”, 3 standards No. Standard number English title 1. EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO 17034:2016) 2. ISO/IEC TS 17021-9:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing and certification of anti-bribery management systems 3. ISO/IEC TR 17026:2015 Conformity assessment - Example of a certification scheme for tangible products Technical Committee No. 3 “Electrical and electronical materials”, 28 standards No. Standard number English title 1. CLC/TS 50576:2016 Electric cables - Extended application of test results for reaction to fire 2. EN 50620:2017 Electric cables - Charging cables for electric vehicles 3. EN 60061- Lamp caps and holders together with gauges for the control of 1:1993/A55:2017 interchangeability and safety - Part 1: Lamp caps 4. EN 60153-1:2016/AC:2017 Hollow metallic waveguides - Part 1: General requirements and measuring methods 5. EN 60153-2:2016/AC:2017 Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides 6. EN 60317-67:2017 Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 7. EN 60317-68:2017 Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 8. EN 60404-1:2017 Magnetic materials - Part 1: Classification 1 9. EN 60404-8-6:2017 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials 10.
  • ISO 9897 Chassis Standard

    ISO 9897 Chassis Standard

    © ISO 2014 – All rights reserved ISO/TC 104/SC 04 Date: 2014-08-5 ISO/DIS 9897-5 ISO/TC 104/SC 04/WG 03 Secretariat: ANSI Freight containers — Container equipment data exchange (CEDEX) — Part 5: General communictaion codes for chassis Conteneurs pour le transport de merchandises — Échange de données sur les équipements de conteneurs (CEDEX) — Partie 5: Codes des communications générales pour châssis Warning This document is not an ISO International Standard. It is distributed for review and comment. It is subject to change without notice and may not be referred to as an International Standard. Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation. Document type: International Standard Document subtype: Document stage: (40) Enquiry Document language: E H:\Abteilungs Archiv\Geschichtsakte FAKRA-Normen\Normen_05001-10000\09897\Part 5\03_DIS und FDIS\ISO_9897-5_(E) 2014-08-05.doc STD Version 2.5a ISO/DIS 9897-5 Copyright notice This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission being secured. Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel.
  • C 186 Official Journal

    C 186 Official Journal

    ISSN 1977-091X Official Journal C 186 of the European Union Volume 56 English edition Information and Notices 28 June 2013 Notice No Contents Page IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2013/C 186/01 Commission communication in the framework of the implementation of Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) . 1 2013/C 186/02 Commission communication in the framework of the implementation of Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) . 24 NOTICES FROM MEMBER STATES 2013/C 186/03 Information communicated by Member States regarding State aid granted under Commission Regu­ lation (EC) No 800/2008 declaring certain categories of aid compatible with the common market in application of Articles 87 and 88 of the Treaty (General Block Exemption Regulation) ( 1) . 62 2013/C 186/04 Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 1857/2006 on the application of Articles 87 and 88 of the Treaty to State aid to small and medium-sized enterprises active in the production of agricultural products
  • Nieuwe Normen NEN

    Nieuwe Normen NEN

    NEN Nieuwe normen NEN Overzicht van nieuwe publicaties van Nationale bijlage bij NEN-EN 1991- Eurocode 1: Belastingen op construc- het Nederlands Normalisatie- 1-1 Eurocode 1: Belastingen op con- ties; Deel 1-4: Algemene belastingen; Instituut, inclusief de Europese nor- structies; Deel 1-1: Algemene belas- Windbelasting. (nl). Prijs op aan- men, in de periode 7 november t/m tingen; Volumieke gewichten, eigen vraag. 10 december 2007. De normbladen gewicht en opgelegde belastingen NEN-EN 1991-1-4:2005/NB:2007 – kunnen worden besteld bij NEN- voor gebouwen. (nl). Prijs op aan- Nationale bijlage bij NEN-EN 1991- Klantenservice, tel. 015-2690391, vraag. 1-4 Eurocode 1: Belastingen op con- waar men ook met vragen terecht NEN-EN 1991-1-1:2002+NB:2007 – structies; Deel 1-4: Algemene belas- kan. Tevens kunnen de genoemde Eurocode 1: Belastingen op construc- tingen; Windbelasting. (nl). Prijs op normen via internet besteld worden ties; Deel 1-1: Algemene belastingen; aanvraag. (www.nen.nl). Correspondentieadres: Volumieke gewichten, eigengewicht NEN-EN 1991-1-5:2003/NB:2007 – Postbus 5059, 2600 GB Delft. en opgelegde belastingen voor gebou- Nationale bijlage bij NEN-EN 1991- wen. (nl). Prijs op aanvraag. 1-5 Eurocode 1: Belastingen op con- Bouw NEN-EN 1991-1-2:2002/NB:2007 – structies; Deel 1-5: Algemene belas- Nationale bijlage bij NEN-EN 1991- tingen; Thermische belasting. (en). NPR-CEN/TR 196-4:2007 – 1-2 Eurocode 1: Belastingen op con- Prijs op aanvraag. Beproevingsmethoden voor cement; structies; Deel 1-2: Algemene belas- NEN-EN 1991-1-5:2003+NB:2007 – Deel 4: Kwantitatieve bepaling van tingen; Belasting bij brand.
  • Rolling Plan for Ict Standardisation 2019

    Rolling Plan for Ict Standardisation 2019

    ROLLING PLAN FOR ICT STANDARDISATION 2019 ICT Standardisation INTRODUCTION European Commission DG Internal Market, Industry, Entrepreneurship and SMEs Standards for Growth The Rolling Plan for ICT standardisation provides a unique The Commission has identified five priority domains1 —5G, bridge between EU policies and standardisation activities cloud, cybersecurity, big data and the internet of things in the field of information and communication technolo- (IoT) —where it considers ICT standardisation most urgent gies (ICT). This allows for increased convergence of stand- for the completion of the digital single market.. It has also ardisation makers’ efforts towards achieving EU policy identified a number of application domains that will bene- goals. This document is the result of an annual dialogue fit from standard setting in those horizontal technologies, involving a wide-range of interested parties as represent- in particular eHealth, intelligent transport systems, smart ed by the multi-stakeholder platform on ICT standardisa- energy and advanced manufacturing. The 2019 Rolling tion. The Rolling Plan focuses on actions that can support Plan continues to include actions to support the priorities EU policies and does not claim to be as complete as the indicated in the Communication. work programmes of the various standardisation bodies. The Rolling Plan is a living document. In the 2019 edition, Standardisation actions identified in this document to sup- four new chapters were added. “Artificial intelligence” port EU policies is complementary to other instruments, in and the “European Global Navigation Satellite System particular the Annual Union Work Programme (AUWP). The (EGNSS)” have been added to the “ Key enablers and se- Rolling Plan lists all areas where ICT standardisation could curity” chapter and “Water management Digitisation” and support EU policy objectives.
  • Service Contract (Lecom029)

    Service Contract (Lecom029)

    SERVICE CONTRACT (LECOM029) APPENDIX A TO STATEMENT OF WORK (SOW) DES LE PfMO PEng Eng - Technical Publications Portfolio Review As At 11 June 2014 11 June 2014 DES LE PfMO PEng Eng - Technical Publications Portfolio Review Summary This review covers 96 publications from the DES LE PEng Eng Technical Publications Portfolio. All of the standards were reviewed by experts in the various fields covered across the 96 documents. The documents’ content, spelling & grammar as well as the currency of any other standards, organisations or materiel referred to, were all taken into account during the reviews. In a few cases, the need for the document at all was questioned, these were: • AESP 0200-A-201-013 – Welding Cutting and Brazing • AESP 0200-A-207-013 – Wet Abrasive Cleaning Process • AESP 0200-A-210-013 – Repair of Threaded Holes by Insert • AESP 0200-A-232-013 – Timber Selection, Preservation and Finishing • AESP 0200-A-237-013 – Fibre Optic Technology • AESP 2610-A-409-8 Pneumatic Tyres and Tubes Associated Road Wheels • Def Stan 34-1 – Flux, Soldering (Zinc Chloride Solution) • Def Stan 68-199 – Windscreen Wash Liquid Concentrate It is recommended that the usage and necessity for these documents is investigated Additionally, it is noted that all Def Stans feature the following preliminary paragraph: “3.3 In consideration of clause 3.2 above, users shall be fully aware of the issue and amendment status of all normative references, particularly when forming part of an Invitation to Tender or contract. Responsibility for the correct application of standards rests with users.” This could be overcome by not making specific reference to issue levels and years of release in the main body of the document.