DOCSLIB.ORG

WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017) WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017) Technical Committee No. 1 “Quality assurance and social responsibility”, 3 standards No. Standard number English title 1. EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO 17034:2016) 2. ISO/IEC TS 17021-9:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing and certification of anti-bribery management systems 3. ISO/IEC TR 17026:2015 Conformity assessment - Example of a certification scheme for tangible products Technical Committee No. 3 “Electrical and electronical materials”, 28 standards No. Standard number English title 1. CLC/TS 50576:2016 Electric cables - Extended application of test results for reaction to fire 2. EN 50620:2017 Electric cables - Charging cables for electric vehicles 3. EN 60061- Lamp caps and holders together with gauges for the control of 1:1993/A55:2017 interchangeability and safety - Part 1: Lamp caps 4. EN 60153-1:2016/AC:2017 Hollow metallic waveguides - Part 1: General requirements and measuring methods 5. EN 60153-2:2016/AC:2017 Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides 6. EN 60317-67:2017 Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 7. EN 60317-68:2017 Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 8. EN 60404-1:2017 Magnetic materials - Part 1: Classification 1 9. EN 60404-8-6:2017 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials 10. EN 60505:2011/AC:2017 Evaluation and qualification of electrical insulation systems 11. EN 60598-2-20:2015/AC:2017 Luminaires - Part 2-20: Particular requirements - Lighting chains 12. EN 60598-2-21:2015/AC:2017 Luminaires - Part 2-21: Particular requirements - Rope lights 13. EN 60793-1-1:2017 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance 14. EN 60793-1-60:2017 Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length 15. EN 60793-1-61:2017 Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk 16. EN 60793-2-70:2017 Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres 17. EN 60794-1-2:2017 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance 18. EN 60794-2-22:2017 Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors 19. EN 60838-1:2017 Miscellaneous lampholders - Part 1: General requirements & tests 20. EN 60838-2-3:2017 Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps 21. EN 60855-1:2017 Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section 22. EN 60966-2-5:2017 Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors 23. EN 60966-2-6:2017 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors 24. EN 61202-1:2017 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification 25. EN 61242:1997/A13:2017 Electric. accessories - Cable reels for household & similar purposes 26. EN 61300-2-9:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock 27. EN 61347-2-3:2011/A1:2017 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps 28. EN 61347-2-13:2014/A1:2017 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules 2 Technical Committee No. 4 “Electrical and electronic devices”, 26 standards No. Standard number English title 1. EN 50341-2-5:2017 Overhead electrical lines exceeding AC 1 kV – Part 2-5: National Normative Aspects (NNA) for DENMARK (based on EN 50341- 1:2012) 2. EN 50341-2-6:2017 Overhead electrical lines exceeding AC 1 kV - Part 2-6: National Normative Aspects (NNA) for SPAIN (based on EN 50341-1:2012) 3. EN 50341-2-9:2017 Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012) 4. EN 50341-2-13:2017 Overhead electrical lines exceeding AC 1 kV - Part 2-13: National Normative Aspects (NNA) for ITALY (based on EN 50341-1:2012) 5. EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods 6. EN 60143-1:2015/AC:2017 Series capacitors for power systems - Part 1: General 7. EN 60855-1:2017 Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section 8. EN 60947-5- Low-voltage switchgear and controlgear - Part 5-5: Control circuit 5:1997/A2:2017 devices and switching elements - Electrical emergency stop device with mechanical latching function 9. EN 61332:2017 Soft ferrite material classification 10. EN 61400-25-4:2017 Wind energy generation systems - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile 11. EN 61400-25-6:2017 Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring 12. EN 61643-351:2017 Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) 13. EN 61709:2017 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion 14. EN 61800-5- Adjustable speed electrical power drive systems - Part 5-1: Safety 1:2007/A1:2017 requirements - Electrical, thermal and energy 3 15. EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional 16. EN 61857-31:2017 Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or less 17. EN 61960-3:2017 Secondary cells and batteries containing alkaline or other non- acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them 18. EN 61975:2010/A1:2017 High-voltage direct current (HVDC) installations - System tests 19. EN 61995-1:2008/A1:2017 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements 20. EN 61995-2:2009/A1:2017 Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL 21. EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements 22. EN 62271-212:2017 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) 23. EN 62477-1:2012/A1:2017 Safety requirements for power electronic converter systems and equipment - Part 1: General 24. EN 62550:2017 Spare parts provisioning 25. EN 62619:2017 Secondary cells and batteries containing alkaline or other non- acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications 26. EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) Technical Committee No. 6 “Technical safety and environment” 63 standards No. Standard number English title 1. EN 50131-5-3:2017 Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency techniques 2. EN 50134-7:2017 Alarm systems - Social alarm systems - Part 7: Application guidelines 3. EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems 4 4. EN 50436-7:2016 Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document 5. CLC/TS 50625-3-2:2016 Collection, logistics & Treatment requirements for WEEE - Part 3- 2: Technical specification for de-pollution - Lamps 6. EN 50593:2017 Electric dishwashers for commercial use - Test methods for measuring the performance 7. EN 50632-3-3:2017 Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers 8. EN 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases 9. EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements 10. EN 60312-1:2017 Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance 11. EN 60335- Household and similar electrical appliances - Safety - Part 1: 1:2012/A12:2017 General requirements 12. HD 60364-6:2016 Low-voltage electrical installations - Part 6: Verification 13. HD 60364-6:2016/A11:2017 Low-voltage electrical installations - Part 6: Verification 14. HD 60364-7- Low-voltage electrical installations - Part 7-718: Requirements for 718:2013/A11:2017 special installations or locations - Communal facilities and workplaces 15. EN 60601-1-8:2007/A11:2017 Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems 16.
Load more

Recommended publications
  • ISO/TC46 (Information and Documentation) Liaison to IFLA
    ISO/TC46 (Information and Documentation) liaison to IFLA Annual Report 2015 TC46 on Information and documentation has been leading efforts related to information management since 1947. Standards1 developed under ISO/TC46 facilitate access to knowledge and information and standardize automated tools, computer systems, and services relating to its major stakeholders of: libraries, publishing, documentation and information centres, archives, records management, museums, indexing and abstracting services, and information technology suppliers to these communities. TC46 has a unique role among ISO information-related committees in that it focuses on the whole lifecycle of information from its creation and identification, through delivery, management, measurement, and archiving, to final disposition. *** The following report summarizes activities of TC46, SC4, SC8 SC92 and their resolutions of the annual meetings3, in light of the key-concepts of interest to the IFLA community4. 1. SC4 Technical interoperability 1.1 Activities Standardization of protocols, schemas, etc. and related models and metadata for processes used by information organizations and content providers, including libraries, archives, museums, publishers, and other content producers. 1.2 Active Working Group WG 11 – RFID in libraries WG 12 – WARC WG 13 – Cultural heritage information interchange WG 14 – Interlibrary Loan Transactions 1.3 Joint working groups 1 For the complete list of published standards, cfr. Appendix A. 2 ISO TC46 Subcommittees: TC46/SC4 Technical interoperability; TC46/SC8 Quality - Statistics and performance evaluation; TC46/SC9 Identification and description; TC46/SC 10 Requirements for document storage and conditions for preservation - Cfr Appendix B. 3 The 42nd ISO TC46 plenary, subcommittee and working groups meetings, Beijing, June 1-5 2015.
    [Show full text]
  • National Standardization Plan 2019-2022
    FINAL APRIL 2020 NATIONAL STANDARDIZATION PLAN 2019-2022 Table of Contents 1 Introduction ............................................................................................................................................................. 2 2 Background ............................................................................................................................................................. 4 3 Methodology ............................................................................................................................................................ 4 3.1 Economic Priorities (Economic Impact Strategy) ................................................................................ 5 3.2 Government Policy Priorities ............................................................................................................ 12 3.3 Non-Economic Priorities (Social Impact Strategy) ............................................................................ 14 3.4 Stakeholders requests (Stakeholder Engagement Strategy) ............................................................. 15 3.5 Selected Sectors of Standardization and Expected Benefits ............................................................. 16 3.5.2 Benefits of Selected Sectors and Sub-Sectors of Standardization ................................................ 17 4 Needed Human and Financial Resources and Work Items Implementation Plan............................................ 19 4.1 Human Resources by Type of Work Item and Category ...................................................................
    [Show full text]
  • On the Composition of ISO 25964 Hierarchical Relations (BTG, BTP, BTI)
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Springer - Publisher Connector Int J Digit Libr (2016) 17:39–48 DOI 10.1007/s00799-015-0162-2 On the composition of ISO 25964 hierarchical relations (BTG, BTP, BTI) Vladimir Alexiev1 · Antoine Isaac2 · Jutta Lindenthal3 Received: 12 January 2015 / Revised: 29 July 2015 / Accepted: 4 August 2015 / Published online: 20 August 2015 © The Author(s) 2015. This article is published with open access at Springerlink.com Abstract Knowledge organization systems (KOS) can use In addition, we relax some of the constraints assigned to the different types of hierarchical relations: broader generic ISO properties, namely the fact that hierarchical relationships (BTG), broader partitive (BTP), and broader instantial apply to SKOS concepts only. This allows us to apply them (BTI). The latest ISO standard on thesauri (ISO 25964) to the Getty Art and Architecture Thesaurus (AAT), where has formalized these relations in a corresponding OWL they are also used for non-concepts (facets, hierarchy names, ontology (De Smedt et al., ISO 25964 part 1: thesauri for guide terms). In this paper, we present extensive examples information retrieval: RDF/OWL vocabulary, extension of derived from the recent publication of AAT as linked open SKOS and SKOS-XL. http://purl.org/iso25964/skos-thes, data. 2013) and expressed them as properties: broaderGeneric, broaderPartitive, and broaderInstantial, respectively. These Keywords Thesauri · ISO 25964 · BTG · BTP · BTI · relations are used in actual thesaurus data. The composition- Broader generic · Broader partitive · Broader instantial · ality of these types of hierarchical relations has not been AAT investigated systematically yet.
    [Show full text]
  • Progress File (Standards Publications)
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 62129:2006 Date published 18 OCTOBER 2008 Calibration of optical spectrum analyzers (IEC 62129:2006 (EQV)) 2. I.S. EN 61076-2-101:2003/A1:2006 Date published 18 OCTOBER 2008 Connectors for electronic equipment -- Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw- locking for low voltage applications (IEC 61076-2-101:2003/A1:2006 (EQV)) 3. I.S. EN 60464-1:1999/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 1: Definitions and general requirements (IEC 60464-1:1998/A1:2006 (EQV)) 4. I.S. EN 60464-3-1:2001/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 1: Ambient curing finishing varnishes (IEC 60464-3-1:2001/A1:2006 (EQV)) 5. I.S. EN 62329-1:2006 Date published 18 OCTOBER 2008 Heat shrinkable moulded shapes -- Part 1: Definitions and general requirements (IEC 62329-1:2005 (EQV)) 6. I.S. EN 61755-1:2006 Date published 18 OCTOBER 2008 Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non- dispersion shifted fibres - General and guidance (IEC 61755-1:2005 (EQV)) 7. I.S. EN 60454-3-8:2006 Date published 18 OCTOBER 2008 Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3 -8:2006 (EQV)) 8.
    [Show full text]
  • Do Tratamento À Organização Da Informação Reflexões Sobre Concepções, Perspectivas E Tendências
    Do tratamento à Organização da Informação Reflexões sobre concepções, perspectivas e tendências Maria Graça Simões Gercina Ângela de Lima COORDENAÇÃO IMPRENSA DA UNIVERSIDADE DE COIMBRA COIMBRA UNIVERSITY PRESS Esta obra apresenta uma reflexão teórica e histórica sobre as noções clássicas de tratamento da informação e de organização da informação, com base na esfera epistemológica da organização do conhecimento. É Composta de oito capítulos que discorrem sobre (1) as variações terminológicas produzidas na Ciência e no Ensino Brasileiro e Português, (2) a discussão de aspectos teórico-conceituais da organização e representação da informação e a sua correlação com os aspectos práticos que envolvem os ambientes informacionais digitais; (3) o delineamento conceitual inerente à representação da informação feito a partir da discussão da catalogação como confluência de aspectos descritivos, temáticos, contextuais e de acesso à informação de modo que a interconexão entre eles esteja assegurada; (4) as diferentes perspectivas teóricas e metodológicas sobre a modelagem de domínios aplicados à elaboração de ferramentas de representação e recuperação de informação, no contexto das redes eletrônicas de informação e comunicação; (5) a identificação e exploração dos aspectos da variação terminológica na produção científica sobre Organização da Informação relativos aos termos Análise Documentária e Análise de Assunto; (6) as aplicações de representação de recurso informacional, os contextos e processos onde as inovações derivadas da ciência da computação, da inteligência artificial, da área de processamento de linguagem natural e de novas plataformas de bancos de dados têm transformado o contexto de produção de documentos, de sistemas de organização do conhecimento, de métodos de exploração semântica e de visualização.
    [Show full text]
  • Conception of a Workflow for the Semi-Automatic Construction of a
    Conception of a Workflow for the Semi-automatic Construction of a ... 217 Conception of a Workflow for the Semi-automatic Construction of a Thesaurus for the German Printing Industry Anette Siebenkäs, Bernd Markscheffel Technische Universität Ilmenau Fachgebiet Informations- und Wissensmanagement Helmholtzplatz 3 (Oeconomicum), 98693 Ilmenau, Germany {anette.siebenkaes, bernd.markscheffel}@tu-ilmenau.de Abstract During the BMWI granted project “Print-IT”, the need of a thesaurus based uniform and consistent language for the German printing industry became evident. In this paper we introduce a semi-automatic construction approach for such a thesaurus and present a workflow which supports users to generate thesaurus typical information structures from relevant digitalized resources with the help of common IT-tools. Keywords: Information organization, Information retrieval, Thesauri 1 Introduction In Germany, the printing industry is largely based on small and medium- sized enterprises (SME) (bvdm 2012) which can benefit from networks to use synergy effects including their target groups. Therefore, a research pro- ject named “Print-IT” granted by BMWI was established. The project part- ners are TU Ilmenau, HTWK Leipzig, SID Leipzig and several SME’s of the printing industry. Main aim of this project was to build an integration plat- In: F. Pehar/C. Schlögl/C. Wolff (Eds.). Re:inventing Information Science in the Networked Society. Proceedings of the 14 th International Symposium on Information Science (ISI 2015), Zadar, Croatia, 19 th —21 st May 2015. Glückstadt: Verlag Werner Hülsbusch, pp. 217—229. 218 Session 3: Information/Data Retrieval, Visualization and Mapping form where SME’s can provide order- or product-specific goods and services (Eine, Stelzer 2014).
    [Show full text]
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018)
    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018) Technical Committee No. 1 “Quality assurance and social responsibility”, 11 standards No. Standard number English title 1. EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) 2. CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities 3. EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) 4. CWA 17145-2:2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework 5. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee 6. EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) 7. EN ISO 41001:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) 8. IWA 18:2016 Framework for integrated community-based life-long health and care services in aged societies 9. IWA 16:2015 International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport 10. ISO/IEC Guide 17:2016 ISO/IEC Guide 17:2016Guide for writing standards taking into account the needs of micro, small and medium-sized enterprises 11. ISO 37500:2014 Guidance on outsourcing Technical Committee No. 3 “Electrical and electronical materials”, 59 standards No. Standard number English title 1. EN 50288-12-1:2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - 1 Horizontal and building backbone cables 2.
    [Show full text]
  • Standards Publications
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. 178:1973 Date published 28 SEPTEMBER 2005 Extruded Rigid PVC Corrugated Sheeting 2. I.S. EN 60835-1-2:1993 Date published 1 JUNE 2005 Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -- Section 2: Basic characteristics (IEC 60835-1-2:1992 (EQV)) 3. I.S. EN 160000:1993/A1:1996 Date published 1 JUNE 2005 Generic Specification: Modular electronic units 4. I.S. EN 61595-1:1999 Date published 1 JUNE 2005 Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use -- Part 1: Format A (IEC 61595-1:1997 (EQV)) 5. I.S. EN 1990:2002+NA:2010 Date published 24 MARCH 2005 Eurocode - Basis of structural design (including Irish National Annex) 6. I.S. EN ISO 14122-4:2004 Date published 23 FEBRUARY 2005 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) 7. I.S. EN 13877-1:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 1: Materials 8. I.S. EN 13877-2:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 2: Functional requirements for concrete pavements 9. I.S. EN 12843:2004 Date published 4 MARCH 2005 Precast concrete products - Masts and poles 10. I.S. EN 13225:2005 Date published 4 MARCH 2005 Precast concrete products - Linear structural elements 11. I.S. EN 13693:2004 Date published 4 MARCH 2005 Precast concrete products - Special roof elements 12.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 5
    Hrvatski zavod za norme Oglasnik za normativne dokumente 5/2014 listopad, 2014. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 2 Rezultati međunarodne i europske 1.1 Hrvatske norme ............................................................ A3 normizacije razvrstani po predmetnom 1.2 Nacrti hrvatskih norma ............................................... A42 ustroju .................................................A83 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ... A42 3 Popis radnih dokumenata Codex 1.4 Povučene hrvatske norme.......................................... A66 Alimentariusa 1.5 Povučeni nacrti hrvatskih norma ....................................... 4 Obavijesti HZN-a 1.6 Ispravci hrvatskih norma .............................................A79 4.1 Cjenik hrvatskih norma 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku........................................................A82 1.8 Drugi normativni dokumenti 1.9 Opća izdanja HZN-a 1.10 Prijevodi hrvatskih normativnih dokumenata ...............A83 A2 HZN - Oglasnik za normativne dokumente 5/2014 • Rezultati hrvatske normizacije Rezultati hrvatske normizacije HZN/TO 21, Protupožarna i vatrogasna oprema HRN EN 694:2014 en pr 1.1 Hrvatske norme Vatrogasne cijevi – Polukrute cijevi za stabilne Temeljem Zakona o normizaciji (Narodne novine 80/2013) sustave (EN 694:2014) hrvatske norme priprema, izdaje i objavljuje Hrvatski zavod za Fire-fighting hoses – Semi-rigid hoses for fixed norme, na prijedlog tehničkih odbora.
    [Show full text]
  • Nr. Standard Reference Title 1 ISO/IEC TS 17021-9:2016
    Nr. Standard reference Title Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence 1 ISO/IEC TS 17021-9:2016 requirements for auditing and certification of anti-bribery management systems 2 ISO 16924:2016 Natural gas fuelling stations - LNG stations for fuelling vehicles Anti-bribery management systems - Requirements with guidance 3 ISO 37001:2016 for use Tissue paper and tissue products - Part 4: Determination of 4 ISO 12625-4:2016 tensile strength, stretch at maximum force and tensile energy absorption Tissue paper and tissue products - Part 5: Determination of wet 5 ISO 12625-5:2016 tensile strength Tissue paper and tissue products - Part 6: Determination of 6 ISO 12625-6:2016 grammage Diesel engines - Steel tubes for high-pressure fuel injection pipes - 7 ISO 8535-1:2016 Part 1: Requirements for seamless cold-drawn single-wall tubes Solid mineral fuels - Determination of total fluorine in coal, coke 8 ISO 11724:2016 and fly ash Petroleum products - Equivalency of test method determining the 9 ISO/TR 19686-100:2016 same property - Part 100: Background and principle of the comparison and the evaluation of equivalency 10 ISO 5775-2:2015 Bicycle tyres and rims - Part 2: Rims Animal welfare management - General requirements and 11 ISO/TS 34700:2016 guidance for organizations in the food supply chain 12 ISO 2603:2016 Simultaneous interpreting - Permanent booths - Requirements 13 ISO 4043:2016 Simultaneous interpreting - Mobile booths - Requirements 14 ISO 20109:2016 Simultaneous
    [Show full text]
  • Though There Are Some Standards Listed Below Available for Free, Many of the Documents in This List Are Addenda, Erratum Or Corrigenda
    Though there are some standards listed below available for free, many of the documents in this list are addenda, erratum or corrigenda. Title Abstract AAMI Standards Program National and Internation NONE Guidance for ANSI/AAMI/ISO 11607, Packaging for terminally sterilized medic Amendment 1 to ANSI/AAMI EC53:1995, AmericanNONE N Enteral feeding set adapters and connectors Specifies safety requireme Erratum- Active implantable medical devices - Electromagnetic compatibility - Underground dielectric optical fiber cable [T Especifica os requisitos m Educational Information About Carbon Monoxide This technical information Certified Ratings Program - Product Rating Manual The program applies to aco Certified Ratings Program Operating Manual (Rev. The purpose of the AMCA In Laboratory Accreditation Program The purpose of the AMCA La Certified Ratings Program - Product Rating ManualThe purpose of this manual Certified Ratings Program - Product Rating Man The purpose of the program Certified Ratings Program - Product Rating Manua The purpose of this manual Certified Ratings Program - Product Rating ManualThis publication is an exte The Financial Impact of Cyber Security - Questio <p><i>The Financial Impac The Financial Management of Cyber Risk: An Imp <p><i> The Financial Mana IDSP Workshop Report: Identity Verification Identity Verification, a wo IDSP Workshop Report: Measuring Identity Theft Measuring Identity Theft, Forced-Circulation Air-Cooling and Air-Heating Coils - Addendum 1 Erratum - American National Standard Technical InfNONE Technical
    [Show full text]
  • Standards Published
    Standards published New International Standards published between 01 May and 31 May 2015 * Available in English only ** French version of standard previously published in English only Price group JPC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-1:2015 Part 1: Energy efficiency C ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-2:2015 Part 2: Renewable energy sources B REMCO Committee on reference materials ISO Guide Reference materials — Good practice in using reference materials 33:2015 E TC 6 Paper, board and p ulps ISO 2144:2015 Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C A ISO 5636- * Paper and board — Determination of air permeance (medium range) — Part 6: Oken method 6:2015 C TC 8 Ships and marine technology ISO * Ships and marine technology — Offshore wind energy — Port and marine operations 29400:2015 H TC 20 Aircraft and space vehicles ISO * Space systems — Space based services requirements for centimetre class positioning 18197:2015 E TC 22 Road vehicles ISO 15118- * Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link 3:2015 layer requirements G ISO 18541- Road vehicles — Standardized access to automotive repair and maintenance information 1:2014 (RMI) — Part 1: General information and use case definition F ISO 18541- Road vehicles — Standardized access to
    [Show full text]