DOCSLIB.ORG

Progress File (Standards Publications)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Progress File (Standards Publications) IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. CEN TR 15352:2006 Date published 23 APRIL 2012 Bitumen and bituminous binders - Development of performance- related specifications: status report 2005 2. I.S. EN 60335-2-7:2010 Date published 20 JUNE 2012 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines 3. I.S. EN 61347-2-12:2005/A1:2010 Date published 7 MARCH 2012 Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2 -12:2005/A1:2010 (EQV)) 4. I.S. EN 61347-2-1:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1:2000 (EQV)) 5. I.S. EN 61347-2-2:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2000 (EQV)) 6. I.S. EN 61347-2-3:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (IEC 61347-2-3:2000 (EQV)) 7. I.S. EN 61347-2-4:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting (IEC 61347-2-4:2000 (EQV)) 8. I.S. EN 61347-2-5:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting (IEC 61347-2-5:2000 (EQV)) 9. I.S. EN 61347-2-6:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting (IEC 61347-2-6:2000 (EQV)) 10. I.S. EN 61347-2-8:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000 (EQV)) 11. I.S. EN 61347-2-9:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-9:2000 (EQV)) Date: 18/07/2018 Page 1 12. I.S. EN 61347-2-10:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) (IEC 61347-2-10:2000 (EQV)) 13. I.S. EN 61347-2-11:2001/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires (IEC 61347-2-11:2001 (EQV)) 14. I.S. EN 61347-2-13:2006/AC:2010 Date published 19 APRIL 2012 Lamp controlgear -- Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2006 (EQV)) 15. I.S. EN 61347-1:2008/A1:2011 Date published 7 MARCH 2012 Lamp controlgear -- Part 1: General and safety requirements (IEC 61347 -1:2007/A1:2010 (EQV)) 16. I.S. EN 1520:2011 Date published 3 JANUARY 2012 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement 17. I.S. EN 60238:2004/A2:2011 Date published 7 MARCH 2012 Edison screw lampholders (IEC 60238:2004/A2:2011 (EQV)) 18. I.S. EN 60357:2003/A3:2011 Date published 7 MARCH 2012 Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002/A3:2011 (EQV)) 19. I.S. EN 60838-1:2004/A2:2011 Date published 7 MARCH 2012 Miscellaneous lampholders -- Part 1: General requirements and tests (IEC 60838 -1:2004/A2:2011 (EQV)) 20. I.S. EN 61167:2011 Date published 7 MARCH 2012 Metal halide lamps - Performance specification (IEC 61167:2011 (EQV)) 21. I.S. EN 62532:2011 Date published 7 MARCH 2012 Fluorescent induction lamps - Safety specifications (IEC 62532:2011 (EQV)) 22. I.S. EN 60598-2-3:2003/A1:2011 Date published 7 MARCH 2012 Luminaires -- Part 2-3: Particular requirements - Luminaires for road and street lighting (IEC 60598-2-3:2002/A1:2011 (EQV)) 23. I.S. EN 60400:2008/A1:2011 Date published 7 MARCH 2012 Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2008/A1:2011 (EQV)) 24. I.S. EN 61184:2008/A1:2011 Date published 7 MARCH 2012 Bayonet lampholders (IEC 61184:2008/A1:2011 (EQV)) Date: 18/07/2018 Page 2 25. I.S. ISO 10001:2007 Date published 14 JUNE 2012 Quality management -- Customer satisfaction -- Guidelines for codes of conduct for organizations 26. I.S. ISO 10003:2007 Date published 14 JUNE 2012 Quality management -- Customer satisfaction -- Guidelines for dispute resolution external to organizations 27. I.S. ISO 10005:2005 Date published 14 JUNE 2012 Quality management systems -- Guidelines for quality plans 28. S.R. ISO/TR 10017:2003 Date published 14 JUNE 2012 Guidance on statistical techniques for ISO 9001:2000 29. I.S. ISO 10019:2005 Date published 14 JUNE 2012 Guidelines for the selection of quality management system consultants and use of their services 30. I.S. EN 62386-210:2011 Date published 7 MARCH 2012 Digital addressable lighting interface -- Part 210: Particular requirements for control gear - Sequencer (device type 9) (IEC 62386-210:2011 (EQV)) 31. I.S. EN 61341:2011 Date published 7 MARCH 2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010 (EQV)) 32. I.S. EN 1999-1-4:2007/A1:2011 Date published 23 AUGUST 2012 Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting 33. I.S. EN 1999-1-3:2007/A1:2011 Date published 23 AUGUST 2012 Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue 34. I.S. EN 61199:2011 Date published 7 MARCH 2012 Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011 (EQV)) 35. I.S. EN 13224:2011 Date published 25 JUNE 2012 Precast concrete products - Ribbed floor elements 36. S.R. CWA 16367:2011 Date published 1 JANUARY 2012 Implementing e-Competence Framework into SMEs 37. I.S. EN ISO 3376:2011 Date published 1 JANUARY 2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011) 38. I.S. EN ISO 11127-3:2011 Date published 1 JANUARY 2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011) Date: 18/07/2018 Page 3 39. I.S. EN ISO 1119:2011 Date published 1 JANUARY 2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) 40. I.S. EN ISO 23936-2:2011 Date published 1 JANUARY 2012 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) 41. I.S. EN ISO 17186:2011 Date published 1 JANUARY 2012 Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2011) 42. I.S. EN 4159:2011 Date published 1 JANUARY 2012 Aerospace series - Paints and varnishes - Determination of resistance to microbial growth 43. I.S. EN ISO 5402-1:2011 Date published 1 JANUARY 2012 Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402 -1:2011) 44. I.S. EN ISO 11372:2011 Date published 1 JANUARY 2012 Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) 45. I.S. EN 15882-1:2011 Date published 1 JANUARY 2012 Extended application of results from fire resistance tests for service installations - Part 1: Ducts 46. I.S. EN ISO 24442:2011 Date published 1 JANUARY 2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011) 47. I.S. EN ISO 11127-7:2011 Date published 1 JANUARY 2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water- soluble chlorides (ISO 11127-7:2011) 48. I.S. EN 16102:2011 Date published 1 JANUARY 2012 Intelligent transport systems - eCall - Operating requirements for third party support 49. I.S. EN ISO 13123:2011 Date published 1 JANUARY 2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) 50. I.S. EN ISO 17450-1:2011 Date published 1 JANUARY 2012 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) Date: 18/07/2018 Page 4 51. I.S. EN ISO 20345:2011 Date published 1 JANUARY 2012 Personal protective equipment - Safety footwear (ISO 20345:2011) 52. I.S. EN ISO 22867:2011 Date published 1 JANUARY 2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) 53. I.S. EN ISO 11127-4:2011 Date published 1 JANUARY 2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2011) 54. I.S. EN ISO 11127-1:2011 Date published 1 JANUARY 2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127 -1:2011) 55.
Load more

Recommended publications
  • Úřadu Pro Technickou Normalizaci, Metrologii a Státní Zkušebnictví
    Ročník 2012 Úřadu pro technickou normalizaci, metrologii a státní zkušebnictví ČÍSLO 11 Zveřejněno dne 8. listopadu 2012 OBSAH: ČÁST A – OZNÁMENÍ Strana: Oddíl 1. Harmonizované normy a určené normy ÚNMZ č. 124/12 o určených normách k vyhlášce č. 306/2012 Sb. Ministerstva zdravotnictví 2 Oddíl 2. České technické normy ÚNMZ č. 114/12 o vydání ČSN, jejich změn, oprav a zrušení 4 ÚNMZ č. 115/12 o schválení evropských a mezinárodních norem k přímému používání jako ČSN 21 ÚNMZ č. 116/12 o zahájení zpracování návrhů českých technických norem 34 ÚNMZ č. 117/12 o veřejném projednání návrhů evropských norem CEN 45 ÚNMZ č. 118/12 o veřejném projednání návrhů evropských norem CENELEC 48 ÚNMZ č. 119/12 o veřejném projednání návrhů evropských telekomunikačních norem 50 Oddíl 3. Metrologie Oddíl 4. Autorizace ÚNMZ č. 120/12 o změně autorizace pro Institut pro testování a certifikaci, a. s., Zlín 51 ÚNMZ č. 121/12 o změně autorizace pro Technický a zkušební ústav stavební Praha, s. p., Praha 57 ÚNMZ č. 122/12 o zrušení autorizace pro Státní zkušebnu zemědělských, potravinářských a lesnických strojů, a.s., Praha 67 ÚNMZ č. 123/12 o zrušení autorizace pro Státní zkušebnu zemědělských, potravinářských a lesnických strojů, a.s., Praha 68 Oddíl 5. Akreditace ČIA, o.p.s. č. 11/12 o vydání osvědčení o akreditaci a o ukončení platnosti osvědčení o akreditaci 69 Upozornění redakce 83 Oddíl 6. Ostatní oznámení MO ČR č. 11/12 o vydání seznamu nových standardizačních dohod NATO, vydání doplňků ke standardizačním dohodám, o zrušení standardizačních dohod a přistoupení ke standardizačním dohodám 84 ČÁST B – INFORMACE ÚNMZ č.
    [Show full text]
  • Osist Pren 13537:2010 SLOVENSKI STANDARD
    SLOVENSKI STANDARD oSIST prEN 13537:2010 01-december-2010 =DKWHYH]DVSDOQHYUHþH Requirements for sleeping bags Anforderungen für Schlafsäcke Exigences relatives aux sacs de couchage Ta slovenski standard je istoveten z: prEN 13537 rev ICS: 97.200.30 Oprema za taborjenje in Camping equipment and tabori camp-sites oSIST prEN 13537:2010 en,fr 2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno. oSIST prEN 13537:2010 oSIST prEN 13537:2010 EUROPEAN STANDARD DRAFT NORME EUROPÉENNE prEN 13537 rev EUROPÄISCHE NORM September 2010 ICS 97.200.30 Will supersede EN 13537:2002 English Version Requirements for sleeping bags Exigences relatives aux sacs de couchage Anforderungen für Schlafsäcke This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136. If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
    [Show full text]
  • Thermal Manikins and Modelling
    Thermal Manikins and Modelling Edited by Jintu Fan The Hong Kong Polytechnic University Hong Kong SIXTH INTERNATIONAL THERMAL MANIKIN AND MODELLING MEETING (6I3M) Thermal Manikins and Modelling Edited by Jintu Fan The Hong Kong Polytechnic University Hong Kong Board of Scientific Program Committee Prof. Victor Candas Prof. Daniel Wai-tin Chan Prof. Jintu Fan Dr. Rob Farrington Dr. Ralph Goldman Dr. Emiel A. Den Hartog Prof. George Havenith Prof. Ingvar Holmer Dr. Harriet Meinander Dr. Hakan O. Nilsson Dr. Mark Richards Prof. Xiao-ming Tao Prof. Weiyuan Zhang Organised by The Hong Kong Polytechnic University First Published in 2006 by The Hong Kong Polytechnic University Hung Hom, Kowloon, Hong Kong Tel: +852 2766 4573; Fax: +852 2365 6407 E-mail: [email protected] http://www.itc.polyu.edu.hk ISBN: 962-367-534-8 The texts of the papers in this volume were set individually by the authors or under their supervision. Only minor corrections to the text may have been carried out by the publisher. No responsibility is assumed by the Publisher, the Editors and Authors for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Printed by The Hong Kong Polytechnic University Reprographic Unit Copyright © 2006 by The Hong Kong Polytechnic University. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the Publisher.
    [Show full text]
  • Product Certification
    Product Certification A comprehensive guide to BSI’s product certification services KITEMARK™ Table of contents 1 BSI Overview - NRTL service for the US and Canada in coalition with MET labs 2.15 - RADMAC - EN 442 radiators and convectors 2.16 BSI Overview 1.1 - STB Mark - certification in Belarus 2.16 What is Product Certification? 1.2 - Keymark - EU construction standards 2.16 Why choose BSI for Product Certification? 1.3 - REAS - Electrical Products to Australia & New Zealand Market 2.17 - EFSG - European Fire & Safety Group 2.17 - VCA certification - Vehicle Certification Agency 2.18 2 Product Certification Schemes and Services - NCS International 2.18 BSI Kitemark 2.2 Benchmark 2.4 3 Section 3 – EU directives CE marking 2.5 ATEX Equipment Directive (94/9/EC) | (99/92.EC) 3.1 Verification Certificate 2.7 Boiler Efficiency Directive (92/42/EEC) 3.2 Green Deal 2.9 Gas Appliances Directive (GAD - 2009/142/EC ) 3.3 GS Certification (pending) 2.10 Lift Directive (LD 95/16/EC) 3.4 Gap Analysis 2.10 Marine Directive (MED 96/98/EC) 3.5 Other Schemes BSI can offer: 2.11 - IEC Certification Schemes for Electronic Products 2.11 Low Voltage Directive (2006/95/EC) 3.6 - IEC Quality Assessment System for Electrtronic Components 2.12 Non Automatic Weighing Instruments Directive (NAWI) - CCA certification - CENELEC Certification Agreement 2.14 90/384/EEC | 93/68/EEC | SI 2000/323) 3.7 - ENEC mark - applicable for Electro technology 2.14 Personal Protective Equipment Directive (PPE 89/686/EEC) 3.8 >> ii Pressure Equipment Directive (PED 97/23/EC)
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 6
    Hrvatski zavod za norme Oglasnik za normativne dokumente 6/2016 prosinac, 2016. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 1.1 Hrvatske norme.....................................................................................................................A3 1.2 Nacrti hrvatskih norma.......................................................................................................... 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku.............................................................. A39 1.4 Povučene hrvatske norme.................................................................................................... A64 1.5 Povučeni nacrti hrvatskih norma........................................................................................... 1.6 Ispravci hrvatskih norma....................................................................................................... A90 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku..................................................
    [Show full text]
  • Příloha Č. 3; NV Č
    Příloha je nedílnou součástí osvědčení o akreditaci č.: 262/2020 ze dne: 21. 4. 2020 Akreditovaný subjekt podle ČSN EN ISO/IEC 17065:2013: Strojírenský zkušební ústav, s.p. Certifikační orgán certifikující produkty Hudcova 424/56b, 621 00 Brno Pracoviště certifikačního orgánu: 1. pracoviště Brno Hudcova 424/56b, 621 00 Brno 2. pracoviště Jablonec nad Nisou Tovární 89/5, 466 01 Jablonec nad Nisou Certifikace produktů (zahrnuje hmotné produkty, procesy, služby) Hmotné produkty Pořadové Specifikace norem 1) Název produktu/skupiny produktů Certifikační schéma číslo (normativních dokumentů) 1* Strojní zařízení 1.0 Stroje pro výrobu a užití mechanické energie kromě motorů NV č. 176/2008 Sb., § 5 pro letadla, automobily a motocykly odst. (2), odst. (3) a), § 6; směrnice Stroje a zařízení pro všeobecné účely 2006/42/ES, čl. 12 odst. Obráběcí stroje, lisy apod. strojní zařízení 2 a 3a), čl. 13; ČSN EN Stroje pro určitá hospodářská odvětví ISO/IEC 17067:2014, schéma 1a ČSN EN ISO 13857 ČSN EN 349+A1 ČSN EN ISO 13850 ČSN EN 547-1+A1 ČSN EN 547-2+A1 ČSN EN 547-3+A1 ČSN EN ISO 13732-1 ČSN EN 574+A1:2008 ČSN EN ISO 13851 ČSN EN 614-1+A1 ČSN EN ISO 14123-1 ČSN EN 842+A1 ČSN EN 894-1+A1 ČSN EN 894-2+A1 ČSN EN 894-3+A1 ČSN EN ISO 14120 ČSN EN ISO 13849-1 ČSN EN ISO 14159 ČSN EN 981+A1 ČSN EN ISO 4413 ČSN EN ISO 4414 ČSN EN ISO 13855 ČSN EN ISO 14118 ČSN EN ISO 14119 ČSN EN 12254 ČSN EN ISO 13856-1 ČSN EN ISO 13856-2 ČSN EN 60204-1 ed.2 ČSN EN 60204-1 ed.3 Strana 1 z celkového počtu 78 stran 11_01-P508_V-20190513 Příloha je nedílnou součástí osvědčení o akreditaci č.: 262/2020 ze dne: 21.
    [Show full text]
  • Nr. Standard Reference Title 1 ISO/IEC TS 17021-9:2016
    Nr. Standard reference Title Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence 1 ISO/IEC TS 17021-9:2016 requirements for auditing and certification of anti-bribery management systems 2 ISO 16924:2016 Natural gas fuelling stations - LNG stations for fuelling vehicles Anti-bribery management systems - Requirements with guidance 3 ISO 37001:2016 for use Tissue paper and tissue products - Part 4: Determination of 4 ISO 12625-4:2016 tensile strength, stretch at maximum force and tensile energy absorption Tissue paper and tissue products - Part 5: Determination of wet 5 ISO 12625-5:2016 tensile strength Tissue paper and tissue products - Part 6: Determination of 6 ISO 12625-6:2016 grammage Diesel engines - Steel tubes for high-pressure fuel injection pipes - 7 ISO 8535-1:2016 Part 1: Requirements for seamless cold-drawn single-wall tubes Solid mineral fuels - Determination of total fluorine in coal, coke 8 ISO 11724:2016 and fly ash Petroleum products - Equivalency of test method determining the 9 ISO/TR 19686-100:2016 same property - Part 100: Background and principle of the comparison and the evaluation of equivalency 10 ISO 5775-2:2015 Bicycle tyres and rims - Part 2: Rims Animal welfare management - General requirements and 11 ISO/TS 34700:2016 guidance for organizations in the food supply chain 12 ISO 2603:2016 Simultaneous interpreting - Permanent booths - Requirements 13 ISO 4043:2016 Simultaneous interpreting - Mobile booths - Requirements 14 ISO 20109:2016 Simultaneous
    [Show full text]
  • Lista Mensal De Outubro 2012
    Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização lista mensal °°° OUTUBRO 2012 A presente -publicação tem por objetivo: - A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas e já disponíveis. - A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente elaboração, aprovação e homologação das Normas. - A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições nacionais. - A divulgação da edição e anulação de outros documentos normativos. ÍNDICE 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas …………………………………………………………………………. 3 1.2 Normas Portuguesas anuladas …………………………………………………………………………… 4 1.3 Normas Portuguesas em re-exame ……………………………………………………………………… 8 1.4 Normas Europeias adotadas ……………………………………………………………………………… 9 2. Normas Europeias Publicadas 2.1 CEN …………………………………………………………………………………………………………….. 18 2.2 CENELEC ………………………………………………………………………………………………………. 21 2.3 CEN/CENELEC ……………………………………………………………………………………………….. 22 2.4 ETSI ……………………………………………………………………………………………………………… 23 3. Normas Internacionais publicadas IEC …………………………………………………………………………………………………………………… 40 ISO …………………………………………………………………………………………………………………..
    [Show full text]
  • Standards Published
    Standards published New International Standards published between 01 May and 31 May 2015 * Available in English only ** French version of standard previously published in English only Price group JPC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-1:2015 Part 1: Energy efficiency C ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-2:2015 Part 2: Renewable energy sources B REMCO Committee on reference materials ISO Guide Reference materials — Good practice in using reference materials 33:2015 E TC 6 Paper, board and p ulps ISO 2144:2015 Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C A ISO 5636- * Paper and board — Determination of air permeance (medium range) — Part 6: Oken method 6:2015 C TC 8 Ships and marine technology ISO * Ships and marine technology — Offshore wind energy — Port and marine operations 29400:2015 H TC 20 Aircraft and space vehicles ISO * Space systems — Space based services requirements for centimetre class positioning 18197:2015 E TC 22 Road vehicles ISO 15118- * Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link 3:2015 layer requirements G ISO 18541- Road vehicles — Standardized access to automotive repair and maintenance information 1:2014 (RMI) — Part 1: General information and use case definition F ISO 18541- Road vehicles — Standardized access to
    [Show full text]
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017)
    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017) Technical Committee No. 1 “Quality assurance and social responsibility”, 3 standards No. Standard number English title 1. EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO 17034:2016) 2. ISO/IEC TS 17021-9:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing and certification of anti-bribery management systems 3. ISO/IEC TR 17026:2015 Conformity assessment - Example of a certification scheme for tangible products Technical Committee No. 3 “Electrical and electronical materials”, 28 standards No. Standard number English title 1. CLC/TS 50576:2016 Electric cables - Extended application of test results for reaction to fire 2. EN 50620:2017 Electric cables - Charging cables for electric vehicles 3. EN 60061- Lamp caps and holders together with gauges for the control of 1:1993/A55:2017 interchangeability and safety - Part 1: Lamp caps 4. EN 60153-1:2016/AC:2017 Hollow metallic waveguides - Part 1: General requirements and measuring methods 5. EN 60153-2:2016/AC:2017 Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides 6. EN 60317-67:2017 Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 7. EN 60317-68:2017 Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 8. EN 60404-1:2017 Magnetic materials - Part 1: Classification 1 9. EN 60404-8-6:2017 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials 10.
    [Show full text]
  • EN13537 Info for Manufacturers
    EN 13537 – Sleeping Bag Standard Information for Brands / Manufacturers Disclaimer This information sheet has been provided by the EOG to help companies assess the implications of the new EN 13537 norm on their businesses. No liability is accepted either expressly or otherwise for actions taken on this subject by individual companies and the EOG does not accept responsibility for, nor warrants that the information contained in this publication is correct. Companies wishing to implement changes based on the information contained herein are advised to seek independent specialist advice before doing so. 30.12.2004 Introduction A new European standard for sleeping bags comes into effect on 1st January 2005. This standard has important legal implications for brands, distributors and retailers selling sleeping bags in Europe and although the standard does not come under the provisions of the Personal Protective Equipment Directive, it is advisable that products sold after the 1st January 2005 should comply with the main requirements of the standard. To provide information on the new standard, a number of EOG members formed a committee to compile information on the following basis: EN 13537 Standard for Sleeping Bags – Information for Manufacturers EN 13537 Standard for Sleeping Bags – Information for Retailers EN 13537 Standard for Sleeping Bags – Information for Consumers Industriestrasse Birren - CH-5703 Seon - Switzerland - Tel: +44 (0)1539 823442 - Fax: +44 (0)1539 823004 - [email protected] What is EN 13537? “EN 13537:2002 Requirements for Sleeping Bags” is the official European Standard for the labelling of sleeping bags. It is a complete product standard which defines how to test, measure and label a sleeping bag.
    [Show full text]
  • Progress File (Standards Publications)
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 2336:1988/AC1:1988 Date published 1 JANUARY 2006 Aerospace Series - Bearings, Spherical Plain in Steel with Assembly Slots - Dimensions and Loads 2. I.S. EN 28378-1:1989/AC1:1989 Date published 1 JANUARY 2006 Information Processing - Data Interchange on 130 mm (5.25") Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7958 ftprad, 3.8 tpmm (96 tpi), on Both Sides - Part 1: Dimensional, Physical and Magnetic Characteristics. (ISO 8378-1, 1st Edition, 3. I.S. HD 1215-2:1988/AC1:1989 Date published 1 JANUARY 2006 Thermostatic Radiator Valves - Part 2 : Dimensions and Details on Connection 4. I.S. EN 50203:1996/A1:1999 Date published 2 FEBRUARY 2006 Automatic channel installation (ACI) 5. I.S. EN 54-2:1999 Date published 1 JANUARY 2006 Fire detection and fire alarm systems - Part 2: Control and indicating equipment 6. I.S. EN 12737:2004 Date published 28 JULY 2006 Precast concrete products - Floor slats for livestock 7. I.S. EN 61009-1:1994/A13:2004 Date published 2 FEBRUARY 2006 Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) -- Part 1: General rules 8. I.S. EN 50091-1-1:2004 Date published 2 FEBRUARY 2006 Uninterruptible power systems (UPS) -- Part 1-1: General and safety requirements for UPS used in operator access areas 9. I.S. EN 60432-1:2004 Date published 2 FEBRUARY 2006 Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999 (MOD)) 10.
    [Show full text]