DOCSLIB.ORG

Nr. Standard Reference Title 1 ISO/IEC TS 17021-9:2016

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

Nr. Standard reference Title Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence 1 ISO/IEC TS 17021-9:2016 requirements for auditing and certification of anti-bribery management systems 2 ISO 16924:2016 Natural gas fuelling stations - LNG stations for fuelling vehicles Anti-bribery management systems - Requirements with guidance 3 ISO 37001:2016 for use Tissue paper and tissue products - Part 4: Determination of 4 ISO 12625-4:2016 tensile strength, stretch at maximum force and tensile energy absorption Tissue paper and tissue products - Part 5: Determination of wet 5 ISO 12625-5:2016 tensile strength Tissue paper and tissue products - Part 6: Determination of 6 ISO 12625-6:2016 grammage Diesel engines - Steel tubes for high-pressure fuel injection pipes - 7 ISO 8535-1:2016 Part 1: Requirements for seamless cold-drawn single-wall tubes Solid mineral fuels - Determination of total fluorine in coal, coke 8 ISO 11724:2016 and fly ash Petroleum products - Equivalency of test method determining the 9 ISO/TR 19686-100:2016 same property - Part 100: Background and principle of the comparison and the evaluation of equivalency 10 ISO 5775-2:2015 Bicycle tyres and rims - Part 2: Rims Animal welfare management - General requirements and 11 ISO/TS 34700:2016 guidance for organizations in the food supply chain 12 ISO 2603:2016 Simultaneous interpreting - Permanent booths - Requirements 13 ISO 4043:2016 Simultaneous interpreting - Mobile booths - Requirements 14 ISO 20109:2016 Simultaneous interpreting - Equipment - Requirements Rubber- or plastics-coated fabrics - Determination of tensile 15 ISO 1421:2016 strength and elongation at break Petroleum and natural gas industries - Offshore production 16 ISO 17776:2016 installations - Major accident hazard management during the design of new installations Stationary training equipment - Part 5: Stationary exercise 17 ISO 20957-5:2016 bicycles and upper body crank training equipment, additional specific safety requirements and test methods Validation methods for fire gas analyses - Part 2: Intralaboratory 18 ISO 12828-2:2016 validation of quantification methods Protective clothing - Protection against flame - Method of test for 19 ISO 15025:2016 limited flame spread Metallic and other inorganic coatings - Electrodeposited nickel- 20 ISO 19487:2016 ceramics composite coatings Mechanical vibration - Measurement of vibration on ships - Part 5: 21 ISO 20283-5:2016 Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships Electrodynamic vibration generating systems - Performance 22 ISO 5344:2004/Amd 1:2016 characteristics - Amendment 1 Servo-hydraulic test equipment for generating vibration - Method 23 ISO 8626:1989/Amd 1:2016 of describing characteristics - Amendment 1 24 ISO 22879:2016 Castors and wheels - Requirements for castors for furniture 25 ISO 22880:2016 Castors and wheels - Requirements for castors for swivel chairs 26 ISO 22882:2016 Castors and wheels - Requirements for castors for hospital beds Industrial trucks - Safety requirements and verification - Part 3: 27 ISO 3691-3:2016 Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads Cigarettes - Determination of tobacco specific nitrosamines in 28 ISO 19290:2016 mainstream cigarette smoke - Method using LC-MS/MS Earth-moving machinery and mobile road construction machinery - 29 ISO/TS 15143-3:2016 Worksite data exchange - Part 3: Telematics data Air filters for general ventilation - Part 1: Technical specifications, 30 ISO 16890-1:2016 requirements and classification system based upon particulate matter efficiency (ePM) Air filters for general ventilation - Part 2: Measurement of 31 ISO 16890-2:2016 fractional efficiency and air flow resistance Air filters for general ventilation - Part 3: Determination of the 32 ISO 16890-3:2016 gravimetric efficiency and the air flow resistance versus the mass of test dust captured Air filters for general ventilation - Part 4: Conditioning method to 33 ISO 16890-4:2016 determine the minimum fractional test efficiency Water quality - Enumeration of Clostridium perfringens - Method 34 ISO 14189:2013 using membrane filtration 35 ISO 12696:2016 Cathodic protection of steel in concrete Document management - XML Forms Data Format - Part 1: Use of 36 ISO 19444-1:2016 ISO 32000-2 (XFDF 3.0) Biological evaluation of medical devices - Part 6: Tests for local 37 ISO 10993-6:2016 effects after implantation Small-bore connectors for liquids and gases in healthcare 38 ISO 80369-7:2016 applications - Part 7: Connectors for intravascular or hypodermic applications 39 ISO 19110:2016 Geographic information - Methodology for feature cataloguing Geographic information - Data quality - Part 2: XML schema 40 ISO/TS 19157-2:2016 implementation 41 ISO 18416:2015 Cosmetics - Microbiology - Detection of Candida albicans 42 ISO 37100:2016 Sustainable cities and communities - Vocabulary Conformity assessment - Requirements for bodies providing audit 43 ISO/IEC 17021-1:2015 and certification of management systems - Part 1: Requirements 44 ISO/IEC 19637:2016 Information technology - Sensor network testing framework Information technology - Security techniques - Cryptographic 45 ISO/IEC 18367:2016 algorithms and security mechanisms conformance testing ISO/IEC 23003-1:2007/Amd Information technology - MPEG audio technologies - Part 1: MPEG 46 3:2016 Surround - Amendment 3: MPEG Surround extension for 3D Audio Information technology - Multimedia service platform technologies 47 ISO/IEC 23006-2:2016 - Part 2: MPEG extensible middleware (MXM) API Information technology - Multimedia service platform technologies 48 ISO/IEC 23006-3:2016 - Part 3: Conformance and reference software Automatic identification and data capture techniques - Bar code 49 ISO/IEC 15416:2016 print quality test specification - Linear symbols Information technology - Metamodel framework for 50 ISO/IEC TS 19763-13:2016 interoperability (MFI) - Part 13: Metamodel for form design registration Information technology - Extensions of Office Open XML file 51 ISO/IEC TR 30114-1:2016 formats - Part 1: Guidelines Information technology - User interfaces - Voice commands - Part 52 ISO/IEC 30122-1:2016 1: Framework and general guidance Information technology - Biometric data interchange formats - ISO/IEC 19794-5:2011/Amd 53 Part 5: Face image data - Amendment 2: XML encoding and 2:2015/Cor 1:2016 clarification of defects - Technical Corrigendum 1 54 ISO 18203:2016 Steel - Determination of the thickness of surface-hardened layers Diesel engines - Fuel injection pumps and fuel injector low- 55 ISO 13948-2:2016 pressure connections - Part 2: Non-threaded (push-on) connections Solid mineral fuels - Vocabulary - Part 2: Terms relating to 56 ISO 1213-2:2016 sampling, testing and analysis Assembly tools for screws and nuts - Double-ended wrenches - 57 ISO 1085:2016 Size pairing Assembly tools for screws and nuts - Open-ended wrenches, box 58 ISO 3318:2016 wrenches and combination wrenches - Maximum widths of heads Language resource management - Semantic annotation 59 ISO 24617-8:2016 framework (SemAF) - Part 8: Semantic relations in discourse, core annotation schema (DR-core) Textiles - Test method for assessing the matting appearance of 60 ISO 16847:2016 napped fabrics after cleansing Non-destructive testing of welds - Acceptance levels for 61 ISO 10675-1:2016 radiographic testing - Part 1: Steel, nickel, titanium and their alloys Gas cylinders - Outlet connections for gas cylinder valves for 62 ISO 12209:2013/Amd 1:2016 compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance 63 ISO 3951-1:2013 quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance 64 ISO 3951-2:2013 quality limit (AQL) for lot-by-lot inspection of independent quality characteristics Nuclear fuel technology - Sintered (U,Pu)O2 pellets - Guidance for 65 ISO 22765:2016 ceramographic preparation for microstructure examination 66 ISO 27769:2016 Wood-based panels - Wet process fibreboard Reaction-to-fire tests - Heat release, smoke production and mass 67 ISO/TS 5660-4:2016 loss rate - Part 4: Measurement of low levels of heat release Clothing and equipment for protection against heat - Test method 68 ISO 17493:2016 for convective heat resistance using a hot air circulating oven Dentistry - Determination of the strength of dental amalgam by 69 ISO/TS 20746:2016 the Hertzian indentation strength (HIT) method Vibration and shock generating systems - Vocabulary - 70 ISO 15261:2004/Amd 1:2016 Amendment 1 Graphical symbols - Safety colours and safety signs - Part 2: 71 ISO 3864-2:2016 Design principles for product safety labels Water quality - Enumeration of Escherichia coli and coliform 72 ISO 9308-1:2014/Amd 1:2016 bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora - Amendment 1 73 ISO 6553:2016 Automatic steam traps - Marking Intelligent transport systems - Traffic and travel information (TTI) 74 ISO/TS 21219-23:2016 via transport protocol experts group, generation 2 (TPEG2) - Part 23: Roads and multimodal routes (TPEG2-RMR)
Recommended publications
  • THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered As a Newspaper at the G.P.O.)

    THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered As a Newspaper at the G.P.O.)

    ~ I v , THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered as a Newspaper at the G.P.O.) Vol. CXX—No. 99 NAIROBI, 17th August, 2018 Price Sh. 60 CONTENTS GAZETTE NOTICES GAZETTE NOTICE5—(Contd.) PAGE PAGE The Human Resource Management Professionals Act- I The Insolvency Act-Winding up Order and Creditors' Appointment....................................................................... 2906 2954-2955 The National Council for Law Reporting Act- The Political Parties Act-Change of Party Officials........... 2955 Appointment....................................................................... 2906 County Government Notices ................................................... 2906-2907,2953 The Physical Planning Act-Completion of Pail Development Plans, etc .................................................... 2955-2956 The Land Registration Act-issue of Provisional Certificates, etc ................................................................... 2907-2915 Disposal of Uncollected Goods .............................................. 2956 The National Treasury-Statement of Actual Revenues and Lossof Policies .......................................... ................................ 2956-2962 Net Exchequer Issues as at 31st July, 2018 ...................... 2915-2918 Change of Names ............................................................ The Civil Aviation Act-Decisions of the Kenya Civil 2962-2963 Aviation Authority on Applications for Air Service Licences ............................................................................
  • Evitalia NORMAS ISO En El Marco De La Complejidad

    Evitalia NORMAS ISO En El Marco De La Complejidad

    No. 7 Revitalia NORMAS ISO en el marco de la complejidad ESTEQUIOMETRIA de las relaciones humanas FRACTALIDAD en los sistemas biológicos Dirección postal Calle 82 # 102 - 79 Bogotá - Colombia Revista Revitalia Publicación trimestral Contacto [email protected] Web http://revitalia.biogestion.com.co Volumen 2 / Número 7 / Noviembre-Enero de 2021 ISSN: 2711-4635 Editor líder: Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. Globuss Biogestión [email protected] ORCID: 0000-0002-1947-5589 Par evaluador: Jhon Eyber Pazos Alonso Experto en nanotecnología, biosensores y caracterización por AFM. Universidad Central / Clúster NBIC [email protected] ORCID: 0000-0002-5608-1597 Contenido en este número Editorial p. 3 Estequiometría de las relaciones humanas pp. 5-13 Catálogo de las normas ISO en el marco de la complejidad pp. 15-28 Fractalidad en los sistemas biológicos pp. 30-37 Licencia Creative Commons CC BY-NC-ND 4.0 2 Editorial: “En armonía con lo ancestral” Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. [email protected] ORCID: 0000-0002-1947-5589 La dicotomía entre ciencia y religión proviene de la edad media, en la cual, los aspectos espirituales no podían explicarse desde el método científico, y a su vez, la matematización mecánica del universo era el único argumento que convencía a los investigadores. Sin embargo, más atrás en la línea del tiempo, los egipcios, sumerios, chinos, etc., unificaban las teorías metafísicas con las ciencias básicas para dar cuenta de los fenómenos en todas las escalas desde lo micro hasta lo macro.
  • Best Practices on Public Warning Systems for Climate-Induced

    Best Practices on Public Warning Systems for Climate-Induced

    Best practices on Public Warning Systems for Climate-Induced Natural Hazards Abstract: This study presents an overview of the Public Warning System, focusing on approaches, technical standards and communication systems related to the generation and the public sharing of early warnings. The analysis focuses on the definition of a set of best practices and guidelines to implement an effective public warning system that can be deployed at multiple geographic scales, from local communities up to the national and also transboundary level. Finally, a set of recommendations are provided to support decision makers in upgrading the national Public Warning System and to help policy makers in outlining future directives. Authors: Claudio Rossi Giacomo Falcone Antonella Frisiello Fabrizio Dominici Version: 30 September 2018 Table of Contents List of Figures .................................................................................................................................. 2 List of Tables ................................................................................................................................... 4 Acronyms ........................................................................................................................................ 4 Core Definitions .............................................................................................................................. 7 1. Introduction .........................................................................................................................
  • Download Complete 2016-17 Catalog

    Download Complete 2016-17 Catalog

    2016-2017 ACADEMIC CATALOG Illinois Community College District No.518 www.sandburg.edu Main Campus Branch Campus 2400 Tom L. Wilson Blvd. 305 Sandburg Dr. Galesburg, IL 61401 Carthage, IL 62321 309.344.2518 217.357.2129 IT LAN & Security Specialist .......................................................... 73 Table of Contents Legal Office Assistant ..................................................................... 74 About Sandburg ....................................................................................... 2 Locomotive Electrical ...................................................................... 76 President's Message ............................................................................... 3 Locomotive Mechanical .................................................................. 77 Board of Trustees .................................................................................... 4 Magnetic Resonance Imaging (MRI) .............................................. 78 History ...................................................................................................... 5 Medical Office Professions ............................................................. 79 District Map .............................................................................................. 6 Medical Assisting ............................................................................ 81 Academic Calendar ................................................................................. 7 Mortuary Science ...........................................................................
  • Copy of SDD Work Program for 2019 for SMD.Xlsx

    Copy of SDD Work Program for 2019 for SMD.Xlsx

    BUREAU OF PROPOSED WORK PROGRAM FOR 2019 PHILIPPINE STANDARDS As of 21 January 2019 STAGES OF DEVELOPMENT 1. Preparatory INTERNATIONAL STATUS 2. Organization Meeting CLASSIFICATION FOR SUBJECT PROJECT REFERENCE [New/Revision (Amd./Cor.)/ 3. Drafting/Deliberation TECHNICAL COMMITTEE STANDARDS Reconfirmation] 4. Circulation (ICS) 5. Finalization 6. Approval BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS Steel castings -- Magnetic particle inspection ISO 4986:2010 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings Steel castings -- Liquid penetrant inspection ISO 4987:2010 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings Steel castings -- Ultrasonic examination -- Part 1: Steel castings ISO 4992-1:2006 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings for general purposes Steel castings -- Ultrasonic examination -- Part 2: Steel castings ISO 4992-2:2006 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings for highly stressed components Steel and iron castings -- Radiographic testing ISO 4993:2015 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings Metallic materials -- Tensile testing -- Part 2: Method of test at ISO 6892-2:2018 New Preparation 77.040.10 BPS/TC 33 Metal Castings elevated temperature Metallic materials -- Tensile testing -- Part 3: Method of test at ISO 6892-3:2015 New Preparation 77.040.10 BPS/TC 33 Metal Castings low temperature Metallic materials -- Tensile testing -- Part 4: Method of test in ISO 6892-4:2015 New Preparation 77.040.10 BPS/TC 33 Metal
  • Isoupdate July 2020

    Isoupdate July 2020

    ISO Update Supplement to ISOfocus July 2020 International Standards in process ISO/CD 6469-2 Electrically propelled road vehicles — Safety specifications — Part 2: Vehicle operational safety An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna- ISO/CD 6460-1 Motorcycles — Measurement method for gase- tional Standard takes the form of a committee draft (CD) - this is cir- ous exhaust emissions and fuel consumption culated for study within an ISO technical committee. When consensus — Part 1: General test requirements has been reached within the technical committee, the document is ISO/CD TS Road vehicles — Ergonomic aspects of trans- sent to the Central Secretariat for processing as a draft International 16951 port information and control systems (TICS) — Standard (DIS). The DIS requires approval by at least 75 % of the Procedures for determining priority of on-board member bodies casting a vote. A confirmation vote is subsequently messages presented to drivers carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. TC 23 Tractors and machinery for agriculture and forestry ISO/CD 14982 Agricultural and forestry machinery — Electro- magnetic compatibility — Test methods and acceptance criteria TC 29 Small tools ISO/CD Tools for pressing — Gas springs — Part 3: 11901-3 Gas spring with increased spring force and CD registered compact built height ISO/CD Tools for pressing — Gas springs — Part 4: 11901-4 Gas springs with increased spring force and same built height Period from 01 June to 01 July 2020 These documents are currently under consideration in the technical TC 30 Measurement of fluid flow in closed committee.
  • Products Subject to Pvoc Programme

    Products Subject to Pvoc Programme

    UGANDA NATIONAL BUREAU OF STANDARDS LIST OF PRODUCTS UNDER COMPULSORY STANDARDS SUBJECT TO THE PVOC PROGRAMME AS AT AUGUST 2015 GROUP I – TOYS PR. NO. PRODUCT ITEMS HS CODES Applicable Uganda Standards I-01 TOYS, INCL. VIDEO GAMES AND OTHER 9503.00.00 Compulsory Uganda Standards ELECTRONIC TOYS, DOLLS, TRICYCLES, NON 1. US ISO 8124-1:2007, Safety of toys — Part 1: ELECTRIC MUSICAL INSTRUMENTS ETC Safety aspects related to mechanical and physical properties (2nd Edition) 2. US ISO 8124-2:2007, Safety of toys — Part 2: Flammability (2nd Edition) 3. US ISO 8124-3:2010/Amd.1:2014, Safety of toys — Part 3: Migration of certain elements (2nd Edition) 4. US ISO 8124-4:2010, Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use I-02 GYMNASIUM, FITNESS AND HEALTH RELATED 9506.91.00 PRODUCTS. International Standards ASTM Standards, F 1749, Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels; F 2106, Test Method for Treadmills; F 2115, Specification for Standards for Treadmills; F 2216, Specification for Selectorized Strength Equipment; F 2276, Specification for Fitness Equipment; 2015-08-06 1/161 UGANDA NATIONAL BUREAU OF STANDARDS F 2277, Test Method for Selectorized Strength Equipment. F3021-13 Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments I-03 BABY TROLLEY AND OTHER RELATED PRODUCTS 8715.00.00 Compulsory Uganda Standards INCL. BABY CRIB, BABY ROCKER US 1570:2014, Standard consumer safety specification for soft infant and toddler carriers International Standards ASTM F833 - 11 Standard Consumer Safety Performance Specification for Carriages and Strollers AS/NZS 2088:2000 ‘Prams and strollers— safety requirements’.
  • SVENSK STANDARD SS-ISO 3864-3:2016 Fastställd/Approved: 2016-03-14 Publicerad/Published: 2016-03-17 Utgåva/Edition: 1 Språk/Language: Engelska/English ICS: 01.080.01

    SVENSK STANDARD SS-ISO 3864-3:2016 Fastställd/Approved: 2016-03-14 Publicerad/Published: 2016-03-17 Utgåva/Edition: 1 Språk/Language: Engelska/English ICS: 01.080.01

    SVENSK STANDARD SS-ISO 3864-3:2016 Fastställd/Approved: 2016-03-14 Publicerad/Published: 2016-03-17 Utgåva/Edition: 1 Språk/Language: engelska/English ICS: 01.080.01 Grafiska symboler – Varselmärkning och varselskyltar – Del 3: Utformning av grafiska symboler för användning av säkerhetsskyltar (ISO 3864-3:2012, IDT) Graphical symbols – Safety colours and safety signs – Part 3: Design principles for graphical symbols for use in safety signs (ISO 3864-3:2012, IDT) This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-8019463 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-8019463 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver – allt från enskilda standarder, tekniska rapporter och standard- paket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga.
  • ISO 3864-1:2002(E) This Is a Free 6 Page Sample

    ISO 3864-1:2002(E) This Is a Free 6 Page Sample

    INTERNATIONAL ISO STANDARD 3864-1 First edition 2002-05-15 Corrected version 2003-12-15 Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs in workplaces and public areas Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 1: Principes de conception pour les signaux de sécurité sur les lieux de travail et dans les lieux publics Reference number ISO 3864-1:2002(E) This is a free 6 page sample. Access the full version online. © ISO 2002 www.standards.com.au Copyright ISO www.isostandards.com.au ISO 3864-1:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. © ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
  • Standards Published

    Standards Published

    Standards published New International Standards published between 01 May and 31 May 2015 * Available in English only ** French version of standard previously published in English only Price group JPC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-1:2015 Part 1: Energy efficiency C ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-2:2015 Part 2: Renewable energy sources B REMCO Committee on reference materials ISO Guide Reference materials — Good practice in using reference materials 33:2015 E TC 6 Paper, board and p ulps ISO 2144:2015 Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C A ISO 5636- * Paper and board — Determination of air permeance (medium range) — Part 6: Oken method 6:2015 C TC 8 Ships and marine technology ISO * Ships and marine technology — Offshore wind energy — Port and marine operations 29400:2015 H TC 20 Aircraft and space vehicles ISO * Space systems — Space based services requirements for centimetre class positioning 18197:2015 E TC 22 Road vehicles ISO 15118- * Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link 3:2015 layer requirements G ISO 18541- Road vehicles — Standardized access to automotive repair and maintenance information 1:2014 (RMI) — Part 1: General information and use case definition F ISO 18541- Road vehicles — Standardized access to
  • (CCI) Ontology Engineering Report

    (CCI) Ontology Engineering Report

    Open Geospatial Consortium Publication Date: 2014-07-16 Approval Date: 2014-05-14 Posted Date: 2014-05-20 Reference number of this document: OGC 14-049 Reference URL for this document: http://www.opengeospatial.net/doc/PER/testbed10/cci-ontology Category: Public Engineering Report Editor: Ingo Simonis, Stephane Fellah OGC® Testbed 10 Cross Community Interoperability (CCI) Ontology Engineering Report Copyright © 2014 Open Geospatial Consortium To obtain additional rights of use, visit http://www.opengeospatial.org/legal/. Warning This document is not an OGC Standard. This document is an OGC Public Engineering Report created as a deliverable in an OGC Interoperability Initiative and is not an official position of the OGC membership. It is distributed for review and comment. It is subject to change without notice and may not be referred to as an OGC Standard. Further, any OGC Engineering Report should not be referenced as required or mandatory technology in procurements. ® Document type: OGC Engineering Report Document subtype: NA Document stage: Approved for public release Document language: English OGC 14-049 Abstract Testbed 10 ontology work focused on: A general examination of ontologies in the context of OGC data modeling, handling, and organization. Testbed-10 has started to define a consistent set of ontologies implementing solid theoretical foundations and semantics. The definition of a core ontologies for representing incident information used by Incident Management Systems (IMS) and mapping symbologies used in the emergency and disaster management domain with the goal to improve interoperability between different IMS symbology sets used across multi-level jurisdiction. Addressed ontology mapping between hydrology feature models using SPARQL and OWL2.
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017)

    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017)

    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2017) Technical Committee No. 1 “Quality assurance and social responsibility”, 3 standards No. Standard number English title 1. EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO 17034:2016) 2. ISO/IEC TS 17021-9:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing and certification of anti-bribery management systems 3. ISO/IEC TR 17026:2015 Conformity assessment - Example of a certification scheme for tangible products Technical Committee No. 3 “Electrical and electronical materials”, 28 standards No. Standard number English title 1. CLC/TS 50576:2016 Electric cables - Extended application of test results for reaction to fire 2. EN 50620:2017 Electric cables - Charging cables for electric vehicles 3. EN 60061- Lamp caps and holders together with gauges for the control of 1:1993/A55:2017 interchangeability and safety - Part 1: Lamp caps 4. EN 60153-1:2016/AC:2017 Hollow metallic waveguides - Part 1: General requirements and measuring methods 5. EN 60153-2:2016/AC:2017 Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides 6. EN 60317-67:2017 Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 7. EN 60317-68:2017 Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 8. EN 60404-1:2017 Magnetic materials - Part 1: Classification 1 9. EN 60404-8-6:2017 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials 10.