DOCSLIB.ORG

Authentieke Versie (PDF)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Authentieke Versie (PDF) Nr. 4985 15 maart STAATSCOURANT 2012 Officiële uitgave van het Koninkrijk der Nederlanden sinds 1814. Nieuwe normen NEN Overzicht van nieuwe publicaties van het Nederlands Normalisatie-Instituut, inclusief de Europese normen, in de periode 7 februari 2012 tot en met 8 maart 2012. De normbladen kunnen worden besteld bij NEN-Klantenservice, tel. 015-2690391, waar men ook met vragen terecht kan. Tevens kunnen de genoemde normen via internet besteld worden (www.nen.nl). Correspondentieadres: Postbus 5059, 2600 GB Delft. Document number Title Arbeid NEN-EN 1078:2012 en Helmen voor fietsers en gebruikers van skateboards en rolschaatsen Prijs EUR 57.80 excl. BTW NEN-EN 12492:2012 en Bergbeklimmersuitrusting – Helmen voor bergbeklimmers – Veiligheidseisen en beproevingsmethoden Prijs EUR 57.80 excl. BTW NEN-EN 13087-10:2012 en Veiligheidshelmen – Beproevingsmethoden – Deel 10: Bescherming tegen warmte- straling Prijs EUR 46.50 excl. BTW NEN-EN 13087-2:2012 en Veiligheidshelmen – Beproevingsmethoden – Deel 2: Dempingseigenschappen Prijs EUR 46.50 excl. BTW NEN-EN 13087-4:2012 en Veiligheidshelmen – Beproevingsmethoden – Deel 4: Effectiviteit van het bevesti- gingssysteem Prijs EUR 46.50 excl. BTW NEN-EN 13087-5:2012 en Veiligheidshelmen – Beproevingsmethoden – Deel 5: Sterkte van het bevestigings- systeem Prijs EUR 46.50 excl. BTW NEN-EN 13087-6:2012 en Veiligheidshelmen – Beproevingsmethoden – Deel 6: Gezichtsveld Prijs EUR 46.50 excl. BTW NEN-EN 13484:2012 en Helmen voor gebruikers van rodelsleeën Prijs EUR 57.80 excl. BTW NEN-EN 13781:2012 en Veiligheidshelmen voor bestuurders en passagiers van sneeuwscooters en bobsleeën Prijs EUR 57.80 excl. BTW NEN-EN 1384:2012 en Helmen voor de ruitersport Prijs EUR 57.80 excl. BTW NEN-EN 1385:2012 en Helmen voor kanovaren en wild-watersporten Prijs EUR 46.50 excl. BTW NEN-EN 14052:2012 en Industriële helmen met een hoog beschermingsniveau Prijs EUR 57.80 excl. BTW NEN-EN-ISO 20347:2012 en Persoonlijke beschermingsmiddelen – Werkschoenen Prijs EUR 109.31 excl. BTW NEN-ISO 3864-3:2012 en Grafische symbolen – Veiligheidskleuren en -tekens – Deel 3: Ontwerpprincipes voor grafische symbolen voor gebruik in veiligheidstekens Prijs EUR 109.31 excl. BTW NEN-EN 397:2012 en Industriële veiligheidshelmen Prijs EUR 57.80 excl. BTW NEN-EN 812:2012 en Industriële stootpetten Prijs EUR 46.50 excl. BTW NEN-EN 966:2012 en Helmen voor luchtsporten Prijs EUR 57.80 excl. BTW Bouw NEN-EN 117:2012 Ontw. en Houtverduurzamingsmiddelen – Bepaling van de giftgrenswaarden tegen Reticulitermes-soorten (Europese termieten) (Laboratoriummethode) Commentaar voor: 2012-06-23 Prijs EUR 22.20 excl. BTW NEN-EN 330:2012 Ontw. en Houtverduurzamingsmiddelen – Bepaling van de relatieve beschermende werking van een houtverduurzamingsmiddel voor gebruik onder een beschermlaag en niet in contact met de grond – L-constructie-methode Commentaar voor: 2012-05-19 Prijs EUR 22.20 excl. BTW NEN-EN 73:2012 Ontw. en Houtverduurzamingsmiddelen – Versnelde veroudering van behandeld hout, voorafgaande aan biologische beproeving – Methode van veroudering door verdamping Commentaar voor: 2012-06-19 Prijs EUR 15.10 excl. BTW Bouwmaterialen NEN-EN 1096-4:2012 Ontw. en Glas in gebouwen – Gecoat glas – Deel 4: Conformiteitsbeoordeling/Productnorm Commentaar voor: 2012-05-19 Prijs EUR 33.60 excl. BTW NEN-EN 12697-5:2009/C1:2012 en Bitumineuze mengsels – Beproevingsmethoden voor warm-asfalt – Deel 5: Bepaling van de mengseldichtheid Prijs EUR 0.00 excl. BTW NEN-EN 129:2012 en Beproevingsmethoden voor deuren – Test voor vervorming van deurbladen door torderen Prijs EUR 32.50 excl. BTW NEN-EN 130:2012 en Beproevingsmethoden voor deuren – Test voor de verandering in de stijfheid van de deurbladen door herhaald torderen Prijs EUR 32.50 excl. BTW NEN-EN 13541:2012 en Glas voor gebouwen – Veiligheidsglas – Beproeving en classificatie van de weer- stand tegen ontploffingsdruk Prijs EUR 46.50 excl. BTW NEN-EN 1423:2012 en Wegmarkeringsmaterialen – Nastrooimateriaal – Glasparels, stroefmakende middelen en mengsels van beide Prijs EUR 92.80 excl. BTW NEN-EN 15651-1:2012 Ontw. en Voegkitten in bouwconstructies – Definities, eisen en conformiteitsbeoordeling – Deel 1: Voegkitten voor afdichtingen in gevels Commentaar voor: 2012-06-09 Prijs EUR 27.50 excl. BTW 1 Staatscourant 2012 nr. 4985 15 maart 2012 Document number Title NEN-EN 15651-2:2012 Ontw. en Voegkitten in bouwconstructies – Definities, eisen en conformiteitsbeoordeling – Deel 2: Beglazingskitten Commentaar voor: 2012-06-09 Prijs EUR 22.20 excl. BTW NEN-EN 15651-3:2012 Ontw. en Voegkitten in bouwconstructies – Definities, eisen en conformiteitsbeoordeling – Deel 3: Voegkitten voor afdichtingen in sanitaire toepassingen Commentaar voor: 2012-06-09 Prijs EUR 22.20 excl. BTW NEN-EN 15651-4:2012 Ontw. en Voegkitten in bouwconstructies – Definities, eisen en conformiteitsbeoordeling – Deel 4: Voegkitten voor afdichtingen in vloeren (voetgangers) Commentaar voor: 2012-06-09 Prijs EUR 27.50 excl. BTW NEN-EN 15651-5:2012 Ontw. en Voegkitten in bouwconstructies – Definities, eisen en conformiteitsbeoordeling – Deel 5: Conformiteitsbeoordeling Commentaar voor: 2012-05-26 Prijs EUR 15.10 excl. BTW NEN-EN 1996-2+C1:2011 nl Eurocode 6 – Ontwerp en berekening van constructies van metselwerk – Deel 2: Ontwerp, materiaalkeuze en uitvoering van constructies van metselwerk Prijs EUR 72.30 excl. BTW NEN-EN 932-5:2012 en Beproevingsmethoden voor algemene eigenschappen van toeslagmaterialen – Deel 5: Algemene apparatuur en kalibratie Prijs EUR 57.80 excl. BTW Bouwveiligheid NEN-EN 14604:2012 Ontw. en Rookmelders Commentaar voor: 2012-06-02 Prijs EUR 50.40 excl. BTW NEN-EN 15269-2:2012 3e Ontw. en Uitbreiding geldigheidsgebied van beproevingsresultaten van brandwerendheid en/of rookwerendheid van deuren en luiken inclusief hang-en sluitwerk – Deel 2: Scharnierende en taatsende deuren van staal Commentaar voor: 2012-05-19 Prijs EUR 50.40 excl. BTW NEN-ISO 16732-1:2012 en Brandveiligheid – Richtlijnen voor de risicobeoordeling van brand – Deel 1: Algemeen Prijs op aanvraag NEN-EN 1991-2+C1:2011 nl Eurocode 1: Belastingen op constructies – Deel 2: Verkeersbelasting op bruggen Prijs EUR 159.90 excl. BTW NEN-EN 1999-1-1+A1:2011/NB:2011 nl Nationale bijlage bij NEN-EN 1999-1-1 Eurocode 9: Ontwerp en berekening van aluminiumconstructies – Deel 1-1: Algemene regels Prijs EUR 22.90 excl. BTW NEN-EN 1999-1-2+C1:2011/NB:2011 nl Nationale bijlage bij NEN-EN 1999-1-2+C1 Eurocode 9: Ontwerp en berekening van aluminiumconstructies – Deel 1-2: Ontwerp en berekening van constructies bij brand Prijs EUR 15.10 excl. BTW NEN-EN 54-2:2012 Ontw. en Automatische brandmeldinstallaties – Deel 2: Brandmeldcentrale Commentaar voor: 2012-06-02 Prijs EUR 44.10 excl. BTW NEN 6058:2012 nl Bepaling van de warmtestralingsbelasting ten gevolge van een brand in een in de buitenlucht gelegen houtopslag Prijs EUR 30.00 excl. BTW NEN 6098:2012 nl Rookbeheersingssystemen voor mechanisch geventileerde parkeergarages Prijs EUR 38.70 excl. BTW Consumentenzaken NEN-ISO 10361:2012 en Tapijten – Vervaardiging van veranderingen van uiterlijk met de trommelproef volgens Vettermann en de trommelproef met zeskant Prijs op aanvraag NEN-EN-ISO 10580:2012 en Veerkrachtige, textiel en laminaatvloerbedekkingen – Beproevingsmethoden voor emmissie van vluchtige organische verbindingen Prijs EUR 87.81 excl. BTW NEN-EN-ISO 10582:2012 en Veerkrachtige vloerbedekkingen – Heterogene poly(vinyl chloride) vloerbedekkingen – Specificatie Prijs EUR 51.97 excl. BTW NEN-EN-ISO 10595:2012 en Veerkrachtige vloerbedekking – Semi-flexibele/vinylcompositie (VCT) poly(vinylchlo- ride) vloertegels – Specificatie Prijs EUR 51.97 excl. BTW NEN-EN-ISO 10874:2012 en Veerkrachtige, textiel en laminaatvloerbedekkingen – Classificatie Prijs EUR 39.42 excl. BTW NEN-EN-ISO 14088:2012 en Leer – Chemische beproeving – Kwantitatieve analyse van bruiningsmiddelen door filtermethode Prijs EUR 59.14 excl. BTW NEN-EN 14362-1:2012 en Textiel – Methoden voor de bepaling van bepaalde aromatische amines afgeleid van azo kleurstoffen – Deel 1: Detectie van het gebruik van bepaalde azo kleurstoffen zonder extractie Prijs EUR 57.80 excl. BTW CEN Guide 15:2012 en Praktijkrichtlijn voor de ontwikkeling van normen voor diensten Prijs op aanvraag NEN-EN-ISO 16187:2012 Ontw. en Schoeisel – Beproevingsmethoden voor schachtmateriaal, voering en inlegzolen – Antibacteriële activiteiten Commentaar voor: 2012-05-19 Prijs EUR 24.20 excl. BTW NEN-EN-ISO 20957-1:2012 Ontw. en Vast opgestelde trainingsapparatuur – Deel 1:Algemene veiliheidseisen en beproe- vingsmethoden Commentaar voor: 2012-06-09 Prijs EUR 24.20 excl. BTW NEN-EN-ISO 23996:2012 en Veerkrachtige vloerbedekkingen – Bepaling van de dichtheid Prijs EUR 39.42 excl. BTW NEN-EN-ISO 23997:2012 en Veerkrachtige vloerbedekkingen – Bepaling van de massa per eenheid van oppervlak Prijs EUR 34.05 excl. BTW NEN-EN-ISO 24345:2012 en Veerkrachtige vloerbedekkingen – Bepaling van de delamineerbaarheid Prijs EUR 44.80 excl. BTW NEN-EN-ISO 26985:2012 en Veerkrachtige vloerbedekkingen – Identificatie van linoleum en bepaling van het cementgehalte en asrest Prijs EUR 44.80 excl. BTW NEN-EN-ISO 26986:2012 en Veerkrachtige vloerbedekkingen – Verende vloerbedekkingen van polyvinylchloride – Specificatie Prijs EUR 51.97 excl. BTW 2 Staatscourant 2012 nr. 4985 15 maart 2012 Document number Title NEN-EN-ISO 26987:2012 en Veerkrachtige vloerbedekkingen – Bepaling van de vlekgevoeligheid en de bestand- heid tegen chemicaliën Prijs EUR 44.80 excl. BTW NEN-EN-ISO 3175-3:2003/C1:2012 en Textiel
Load more

Recommended publications
  • Best Practices on Public Warning Systems for Climate-Induced
    Best practices on Public Warning Systems for Climate-Induced Natural Hazards Abstract: This study presents an overview of the Public Warning System, focusing on approaches, technical standards and communication systems related to the generation and the public sharing of early warnings. The analysis focuses on the definition of a set of best practices and guidelines to implement an effective public warning system that can be deployed at multiple geographic scales, from local communities up to the national and also transboundary level. Finally, a set of recommendations are provided to support decision makers in upgrading the national Public Warning System and to help policy makers in outlining future directives. Authors: Claudio Rossi Giacomo Falcone Antonella Frisiello Fabrizio Dominici Version: 30 September 2018 Table of Contents List of Figures .................................................................................................................................. 2 List of Tables ................................................................................................................................... 4 Acronyms ........................................................................................................................................ 4 Core Definitions .............................................................................................................................. 7 1. Introduction .........................................................................................................................
    [Show full text]
  • Nr. Standard Reference Title 1 ISO/IEC TS 17021-9:2016
    Nr. Standard reference Title Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence 1 ISO/IEC TS 17021-9:2016 requirements for auditing and certification of anti-bribery management systems 2 ISO 16924:2016 Natural gas fuelling stations - LNG stations for fuelling vehicles Anti-bribery management systems - Requirements with guidance 3 ISO 37001:2016 for use Tissue paper and tissue products - Part 4: Determination of 4 ISO 12625-4:2016 tensile strength, stretch at maximum force and tensile energy absorption Tissue paper and tissue products - Part 5: Determination of wet 5 ISO 12625-5:2016 tensile strength Tissue paper and tissue products - Part 6: Determination of 6 ISO 12625-6:2016 grammage Diesel engines - Steel tubes for high-pressure fuel injection pipes - 7 ISO 8535-1:2016 Part 1: Requirements for seamless cold-drawn single-wall tubes Solid mineral fuels - Determination of total fluorine in coal, coke 8 ISO 11724:2016 and fly ash Petroleum products - Equivalency of test method determining the 9 ISO/TR 19686-100:2016 same property - Part 100: Background and principle of the comparison and the evaluation of equivalency 10 ISO 5775-2:2015 Bicycle tyres and rims - Part 2: Rims Animal welfare management - General requirements and 11 ISO/TS 34700:2016 guidance for organizations in the food supply chain 12 ISO 2603:2016 Simultaneous interpreting - Permanent booths - Requirements 13 ISO 4043:2016 Simultaneous interpreting - Mobile booths - Requirements 14 ISO 20109:2016 Simultaneous
    [Show full text]
  • SVENSK STANDARD SS-ISO 3864-3:2016 Fastställd/Approved: 2016-03-14 Publicerad/Published: 2016-03-17 Utgåva/Edition: 1 Språk/Language: Engelska/English ICS: 01.080.01
    SVENSK STANDARD SS-ISO 3864-3:2016 Fastställd/Approved: 2016-03-14 Publicerad/Published: 2016-03-17 Utgåva/Edition: 1 Språk/Language: engelska/English ICS: 01.080.01 Grafiska symboler – Varselmärkning och varselskyltar – Del 3: Utformning av grafiska symboler för användning av säkerhetsskyltar (ISO 3864-3:2012, IDT) Graphical symbols – Safety colours and safety signs – Part 3: Design principles for graphical symbols for use in safety signs (ISO 3864-3:2012, IDT) This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-8019463 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-8019463 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver – allt från enskilda standarder, tekniska rapporter och standard- paket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga.
    [Show full text]
  • ISO 3864-1:2002(E) This Is a Free 6 Page Sample
    INTERNATIONAL ISO STANDARD 3864-1 First edition 2002-05-15 Corrected version 2003-12-15 Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs in workplaces and public areas Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 1: Principes de conception pour les signaux de sécurité sur les lieux de travail et dans les lieux publics Reference number ISO 3864-1:2002(E) This is a free 6 page sample. Access the full version online. © ISO 2002 www.standards.com.au Copyright ISO www.isostandards.com.au ISO 3864-1:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. © ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • (CCI) Ontology Engineering Report
    Open Geospatial Consortium Publication Date: 2014-07-16 Approval Date: 2014-05-14 Posted Date: 2014-05-20 Reference number of this document: OGC 14-049 Reference URL for this document: http://www.opengeospatial.net/doc/PER/testbed10/cci-ontology Category: Public Engineering Report Editor: Ingo Simonis, Stephane Fellah OGC® Testbed 10 Cross Community Interoperability (CCI) Ontology Engineering Report Copyright © 2014 Open Geospatial Consortium To obtain additional rights of use, visit http://www.opengeospatial.org/legal/. Warning This document is not an OGC Standard. This document is an OGC Public Engineering Report created as a deliverable in an OGC Interoperability Initiative and is not an official position of the OGC membership. It is distributed for review and comment. It is subject to change without notice and may not be referred to as an OGC Standard. Further, any OGC Engineering Report should not be referenced as required or mandatory technology in procurements. ® Document type: OGC Engineering Report Document subtype: NA Document stage: Approved for public release Document language: English OGC 14-049 Abstract Testbed 10 ontology work focused on: A general examination of ontologies in the context of OGC data modeling, handling, and organization. Testbed-10 has started to define a consistent set of ontologies implementing solid theoretical foundations and semantics. The definition of a core ontologies for representing incident information used by Incident Management Systems (IMS) and mapping symbologies used in the emergency and disaster management domain with the goal to improve interoperability between different IMS symbology sets used across multi-level jurisdiction. Addressed ontology mapping between hydrology feature models using SPARQL and OWL2.
    [Show full text]
  • International Standard Iso 3864-1
    INTERNATIONAL ISO STANDARD 3864-1 Second edition 2011-04-15 Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 1: Principes de conception pour les signaux de sécurité et les marquages de sécurité This is a free 5 page sample. Access the full version online. Reference number ISO 3864-1:2011(E) © ISO 2011 ISO 3864-1:2011(E) This is a free 5 page sample. Access the full version online. COPYRIGHT PROTECTED DOCUMENT © ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org Published in Switzerland ii © ISO 2011 – All rights reserved ISO 3864-1:2011(E) Contents Page Foreword ............................................................................................................................................................iv Introduction.........................................................................................................................................................v 1 Scope......................................................................................................................................................1
    [Show full text]
  • Iso 1087:2019
    This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80016687 INTERNATIONAL ISO STANDARD 1087 Second edition 2019-09 Terminology work and terminology science — Vocabulary Travail terminologique et science de la terminologie — Vocabulaire Reference number ISO 1087:2019(E) © ISO 2019 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80016687 ISO 1087:2019(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2019 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. ISO copyright office CP 401 • Ch. de Blandonnet 8 CH-1214 Vernier, Geneva Phone: +41 22 749 01 11 Fax:Website: +41 22www.iso.org 749 09 47 Email: copyright@iso.org iiPublished in Switzerland © ISO 2019 – All rights reserved This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80016687 ISO 1087:2019(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv Introduction ..................................................................................................................................................................................................................................v
    [Show full text]
  • Iso 3864-3:2006(E)
    This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-907309 INTERNATIONAL ISO STANDARD 3864-3 First edition 2006-04-15 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 3: Principes de conception des symboles graphiques utilisés dans les signaux de sécurité Reference number ISO 3864-3:2006(E) © ISO 2006 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-907309 ISO 3864-3:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. © ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • News Iso Standards: 2017/01
    NEWS ISO STANDARDS: 2017/01 ISO/IEC 26557: 2016 214.00 € ISO/IEC 26557 Software and systems engineering -- Methods and Buy tools for variability mechanisms in software and systems product line ISO 13775-2: 2016 141.00 € ISO 13775-2 Thermoplastic tubing and hoses for automotive use -- Buy Part 2: Petroleum-based-fuel applications ISO 16847: 2016 54.00 € ISO 16847 Textiles -- Test method for assessing the matting Buy appearance of napped fabrics after cleansing ISO 16923: 2016 189.00 € ISO 16923 Natural gas fuelling stations -- CNG stations for fuelling Buy vehicles ISO 16924: 2016 214.00 € ISO 16924 Natural gas fuelling stations -- LNG stations for fuelling Buy vehicles ISO 24617-8: 2016 189.00 € ISO 24617-8 Language resource management -- Semantic annotation Buy framework (SemAF) -- Part 8: Semantic relations in discourse, core annotation schema (DR-core) ISO 17987-7: 2016 239.00 € ISO 17987-7 Road vehicles -- Local Interconnect Network (LIN) -- Part Buy 7: Electrical Physical Layer (EPL) conformance test specification ISO/TS 18062: 2016 141.00 € ISO/TS 18062 Health informatics -- Categorial structure for Buy representation of herbal medicaments in terminological systems ISO 17493: 2016 69.00 € ISO 17493 Clothing and equipment for protection against heat -- Test Buy method for convective heat resistance using a hot air circulating oven ISO 1213-2: 2016 189.00 € ISO 1213-2 Solid mineral fuels -- Vocabulary -- Part 2: Terms relating Buy to sampling, testing and analysis ISO 18203: 2016 106.00 € ISO 18203 Steel -- Determination of the thickness
    [Show full text]
  • Iso 3864-3:2012(E)
    INTERNATIONAL ISO STANDARD 3864-3 Second edition 2012-02-01 Corrected version 2012-06-15 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 3: Principes de conception pour les symboles graphiques utilisés dans les signaux de sécurité This is a free 6 page sample. Access the full version online. Reference number ISO 3864-3:2012(E) © ISO 2012 ISO 3864-3:2012(E) This is a free 6 page sample. Access the full version online. COPYRIGHT PROTECTED DOCUMENT © ISO 2012 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org Published in Switzerland ii © ISO 2012 – All rights reserved ISO 3864-3:2012(E) Contents Page Foreword ............................................................................................................................................................................ iv Introduction ........................................................................................................................................................................ v 1 Scope .....................................................................................................................................................................
    [Show full text]
  • Graphical Symbols - Technical Guidelines for the Consideration of Cvonsumers' Needs [MSD 10: Social Responsibility]
    इंटरनेट मानक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public. “जान का अधकार, जी का अधकार” “परा को छोड न 5 तरफ” Mazdoor Kisan Shakti Sangathan Jawaharlal Nehru “The Right to Information, The Right to Live” “Step Out From the Old to the New” IS/ISO/IEC GUIDE 74 (2004): Graphical symbols - Technical guidelines for the consideration of cvonsumers' needs [MSD 10: Social Responsibility] “ान $ एक न भारत का नमण” Satyanarayan Gangaram Pitroda “Invent a New India Using Knowledge” “ान एक ऐसा खजाना > जो कभी चराया नह जा सकताह ै”ै Bhartṛhari—Nītiśatakam “Knowledge is such a treasure which cannot be stolen” IS/ISOIIEC Guide 74 : 2004 ~ ~ - ~ 011Cf~~(f)dl '3:ff cR U1R if m Cf){ ~ fu~TTRt~T Indian Standard GRAPHICAL SYMBOLS -TECHNICAL GUIDELINES FOR THE CONSIDERATION OF CONSUMERS' NEEDS ICS 0 1.080.01: 97.020 © BIS 2009 BUREAU OF INDIAN STANDARDS M AN AK BHAVAN. 9 BAH AD U R SH AH ZAFAR MARG NEW DELHI 110002 June 2009 Price Group
    [Show full text]
  • Iso 3864-2:2004"
    This is a preview of "ISO 3864-2:2004". Click here to purchase the full version from the ANSI store. INTERNATIONAL ISO STANDARD 3864-2 First edition 2004-10-15 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 2: Principes de conception pour l'étiquetage de sécurité des produits Reference number ISO 3864-2:2004(E) © ISO 2004 This is a preview of "ISO 3864-2:2004". Click here to purchase the full version from the ANSI store. ISO 3864-2:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. © ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]