Nr. Standard reference Title Information technology - Open Systems Interconnection - The 1 ISO/IEC 9594-1:2017 Directory - Part 1: Overview of concepts, models and services Information technology - Open Systems Interconnection - The 2 ISO/IEC 9594-2:2017 Directory - Part 2: Models Information technology - Open Systems Interconnection - The 3 ISO/IEC 9594-3:2017 Directory - Part 3: Abstract service definition Information technology - Open Systems Interconnection - The 4 ISO/IEC 9594-4:2017 Directory - Part 4: Procedures for distributed operation Information technology - Open Systems Interconnection - The 5 ISO/IEC 9594-5:2017 Directory - Part 5: Protocol specifications Information technology - Open Systems Interconnection - The 6 ISO/IEC 9594-6:2017 Directory - Part 6: Selected attribute types Information technology - Open Systems Interconnection - The 7 ISO/IEC 9594-7:2017 Directory - Part 7: Selected object classes Information technology - Open Systems Interconnection - The 8 ISO/IEC 9594-8:2017 Directory - Part 8: Public-key and attribute certificate frameworks Information technology - Open Systems Interconnection - The 9 ISO/IEC 9594-9:2017 Directory - Part 9: Replication Paper and board - Determination of CIE whiteness, D65/10 10 ISO 11475:2017 degrees (outdoor daylight) Pulp, paper and board - Determination of total chlorine and 11 ISO 11480:2017 organically bound chlorine Non-alloy steel wire rod for conversion to wire - Part 1: General 12 ISO 16120-1:2017 requirements Non-alloy steel wire rod for conversion to wire - Part 4: Specific 13 ISO 16120-4:2017 requirements for wire rod for special applications Aerospace series - AC induction electric motor driven, variable 14 ISO 18170:2017 delivery, hydraulic pumps - General requirements 15 ISO 21927-7:2017 Smoke and heat control systems - Part 7: Smoke ducts sections Smoke and heat control systems - Part 8: Smoke control 16 ISO 21927-8:2017 dampers Machinery for forestry - Portable brush-cutters and grass- 17 ISO 7112:2017 trimmers - Vocabulary Cutting tool data representation and exchange - Part 50: 18 ISO/TS 13399-50:2013 Reference dictionary for reference systems and common concepts Tyres (ply rating marked series) and rims for agricultural tractors 19 ISO 4251-1:2017 and machines - Part 1: Tyre designation and dimensions, and approved rim contours Tyres (ply rating marked series) and rims for agricultural tractors 20 ISO 4251-2:2017 and machines - Part 2: Tyre load ratings Acoustics - Measurement of the influence of road surfaces on 21 ISO/TS 11819-3:2017 traffic noise - Part 3: Reference tyres Acoustics - Temperature influence on tyre/road noise 22 ISO/TS 13471-1:2017 measurement - Part 1: Correction for temperature when testing with the CPX method Methods of test for full-flow lubricating oil filters for internal 23 ISO 4548-12:2017 combustion engines - Part 12: Filtration efficiency using particle counting and contaminant retention capacity Sterile hypodermic syringes for single use - Part 1: Syringes for 24 ISO 7886-1:2017 manual use 25 ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system Iron ores for blast furnace feedstocks - Determination of low- 26 ISO 13930:2015 temperature reduction-disintegration indices by dynamic method 27 ISO 1797:2017 Dentistry - Shanks for rotary and oscillating instruments Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling 28 ISO 7787-3:2017 machines 29 ISO 19715:2017 Dentistry - Filling instrument with contra angle Human response to vibration - Measuring instrumentation - Part 30 ISO 8041-1:2017 1: General purpose vibration meters Hydrometry - Open channel flow measurement using thin-plate 31 ISO 1438:2017 weirs 32 ISO 6420:2016 Hydrometry - Position fixing equipment for hydrometric boats Graphical symbols - Safety colours and safety signs - Part 2: 33 ISO 3864-2:2016 Design principles for product safety labels Water quality - Enumeration of Escherichia coli and coliform 34 ISO 9308-1:2014/Amd 1:2016 bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora - Amendment 1 Water quality - Sampling - Part 14: Guidance on quality 35 ISO 5667-14:2014 assurance and quality control of environmental water sampling and handling Ophthalmic implants - Ophthalmic viscosurgical devices - 36 ISO 15798:2013/Amd 1:2017 Amendment 1 37 ISO 25947-1:2017 Fireworks - Categories 1, 2 and 3 - Part 1: Terminology 38 ISO 25947-2:2017 Fireworks - Categories 1, 2 and 3 - Part 2: Categories and types Fireworks - Categories 1, 2 and 3 - Part 3: Minimum labelling 39 ISO 25947-3:2017 requirements 40 ISO 25947-4:2017 Fireworks - Categories 1, 2 and 3 - Part 4: Test methods Fireworks - Categories 1, 2 and 3 - Part 5: Requirements for 41 ISO 25947-5:2017 construction and performance Information technology - Biometric data interchange format - 42 ISO/IEC 19794-15:2017 Part 15: Palm crease image data Application of ISO 26262:2011-2012 to semiconductors - Part 1: 43 ISO/PAS 19451-1:2016 Application of concepts Agricultural machinery - Safety - Part 12: Rotary disc and drum 44 ISO 4254-12:2012/Amd 1:2017 mowers and flail mowers - Amendment 1 Garden equipment - Safety requirements for combustion-engine- 45 ISO 5395-2:2013/Amd 2:2017 powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 2: Cutting-means-enclosure guards Preparation of particulate reference materials - Part 1: 46 ISO/TS 14411-1:2017 Polydisperse material based on picket fence of monodisperse spherical particles Petroleum products - Determination of the filterability of 47 ISO 13357-1:2017 lubricating oils - Part 1: Procedure for oils in the presence of water Petroleum products - Determination of the filterability of 48 ISO 13357-2:2017 lubricating oils - Part 2: Procedure for dry oils Petroleum and related products - Temperature and pressure 49 ISO 91:2017 volume correction factors (petroleum measurement tables) and standard reference conditions Cutting tool data representation and exchange - Part 80: 50 ISO/TS 13399-80:2017 Creation and exchange of 3D models - Overview and principles Photography - Electronic still-picture imaging - Noise 51 ISO 15739:2017 measurements 52 ISO 19846:2017 Reclaimed rubber - Coding and classification system 53 ISO 5127:2017 Information and documentation - Foundation and vocabulary Information and documentation - The Dublin Core metadata 54 ISO 15836-1:2017 element set - Part 1: Core elements Plastics - Injection moulding of test specimens of thermoplastic 55 ISO 294-1:2017 materials - Part 1: General principles, and moulding of multipurpose and bar test specimens Plastics - Fluoropolymer dispersions and moulding and extrusion 56 ISO 20568-1:2017 materials - Part 1: Designation system and basis for specifications Plastics - Fluoropolymer dispersions and moulding and extrusion 57 ISO 20568-2:2017 materials - Part 2: Preparation of test specimens and determination of properties Capability of detection - Part 5: Methodology in the linear and 58 ISO 11843-5:2008/Amd 1:2017 non-linear calibration cases - Amendment 1 Reciprocating internal combustion engines - Exhaust emission 59 ISO 8178-1:2017 measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions Underground mining machines - Mobile extracting machines at 60 ISO 19225:2017 the face - Safety requirements for shearer loaders and plough systems Cranes - Cabins and control stations - Part 5: Overhead travelling 61 ISO 8566-5:2017 and portal bridge cranes Cranes - Design principles for loads and load combinations - Part 62 ISO 8686-5:2017 5: Overhead travelling and portal bridge cranes 63 ISO 21940-2:2017 Mechanical vibration - Rotor balancing - Part 2: Vocabulary Tobacco and tobacco products - Determination of nicotine purity - 64 ISO 13276:2017 Gravimetric method using tungstosilicic acid 65 ISO 7001:2007/Amd 4:2017 Graphical symbols - Public information symbols - Amendment 4 66 ISO 11731:2017 Water quality - Enumeration of Legionella Implants for surgery - Orthopaedic joint prosthesis - Part 1: 67 ISO 19233-1:2017 Procedure for producing parametric 3D bone models from CT data of the knee Industrial valves - Lined metal quarter turn and check valves for 68 ISO 19240:2017 chemical process and related industries 69 ISO 6372:2017 Nickel and nickel alloys - Terms and definitions Determination of resistance to intergranular corrosion of stainless 70 ISO 3651-3:2017 steels - Part 3: Corrosion test for low-Cr ferritic stainless steels 71 ISO 10939:2017 Ophthalmic instruments - Slit-lamp microscopes Intelligent transport systems - Cooperative ITS - Test 72 ISO/TS 20026:2017 architecture Building environment design - Indoor environment - Design 73 ISO 16817:2017 process for the visual environment Geometrical product specifications (GPS) - Surface texture: Areal - 74 ISO 25178-72:2017 Part 72: XML file format x3p Health informatics - Data elements and their metadata for 75 ISO/TS 20428:2017 describing structured clinical genomic sequence information in electronic health records Nanotechnologies - Characterization of single-wall carbon 76 ISO/TS 10868:2017 nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy Project, programme and portfolio management - Guidance on 77 ISO 21505:2017 governance 78 ISO/IEC/IEEE 15939:2017 Systems and software engineering - Measurement process Information technology - Generic coding of moving pictures and ISO/IEC 13818-1:2015/Amd associated audio information - Part 1: Systems - Amendment 3: 79 3:2016/Cor 1:2017 Carriage of green metadata in MPEG2 systems - Technical Corrigendum 1 Information technology - Generic coding of moving pictures and ISO/IEC 13818-1:2015/Cor 80 associated audio information - Part 1: Systems - Technical 2:2017 Corrigendum 2 Paper - Determination of light scattering and absorption 81 ISO 9416:2017 coefficients (using Kubelka-Munk theory) 82 ISO 6482:2017 Shipbuilding - Deck machinery - Warping end profiles Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - 83 ISO 17949:2013/Amd 1:2017 Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions - Amendment 1 Cheese - Determination of propionic acid level by 84 ISO/TS 19046-1:2017 chromatography - Part 1: Method by gas chromatography Cheese - Determination of propionic acid level by 85 ISO/TS 19046-2:2017 chromatography - Part 2: Method by ion exchange chromatography Microbiology of the food chain - Horizontal method for the 86 ISO 11290-1:2017 detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 1: Detection method Microbiology of the food chain - Horizontal method for the 87 ISO 11290-2:2017 detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method 88 ISO 14555:2017 Welding - Arc stud welding of metallic materials Sustainability in buildings and civil engineering works - Carbon 89 ISO 16745-1:2017 metric of an existing building during use stage - Part 1: Calculation, reporting and communication Sustainability in buildings and civil engineering works - Carbon 90 ISO 16745-2:2017 metric of an existing building during use stage - Part 2: Verification Direct reduced iron - Determination of carbon and/or sulfur - 91 ISO/TR 9686:2017 High-frequency combustion method with infrared measurement Thermal spraying - Determination of interfacial toughness of 92 ISO 20267:2017 ceramic coatings by indentation Methods for the calibration of vibration and shock transducers - 93 ISO 16063-45:2017 Part 45: In-situ calibration of transducers with built in calibration coil Medical electrical equipment - Part 2-74: Particular requirements 94 ISO 80601-2-74:2017 for basic safety and essential performance of respiratory humidifying equipment Cathodic protection - Competence levels of cathodic protection 95 ISO 15257:2017 persons - Basis for a certification scheme Gas analysis - Handling of calibration gases and gas mixtures - 96 ISO 16664:2017 Guidelines Document management - Electronically stored information - 97 ISO/TR 15801:2017 Recommendations for trustworthiness and reliability Biological evaluation of medical devices - Part 16: Toxicokinetic 98 ISO 10993-16:2017 study design for degradation products and leachables 99 ISO 14823:2017 Intelligent transport systems - Graphic data dictionary Environmental management - Environmental performance 100 ISO 14031:2013 evaluation - Guidelines 101 ISO 20308:2017 Traditional Chinese medicine - Gua Sha instruments Traditional Chinese medicine - Computerized tongue image 102 ISO 20498-2:2017 analysis system - Part 2: Light environment Human resource management - Sustainable employability 103 ISO/TR 30406:2017 management for organizations Conformity assessment - General requirements for bodies 104 ISO/IEC 17024:2012 operating certification of persons Conformity assessment - General requirements for third-party 105 ISO/IEC 17030:2003 marks of conformity Smart city concept model - Guidance for establishing a model for 106 ISO/IEC 30182:2017 data interoperability Identification cards - Contactless integrated circuit cards - Vicinity ISO/IEC 15693-3:2009/Amd 107 cards - Part 3: Anticollision and transmission protocol - 4:2017 Amendment 4: Security framework Information technology - Generic cabling systems for customer 108 ISO/IEC TR 11801-9904:2017 premises - Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications Information technology - Security techniques - Information 109 ISO/IEC 27001:2013 security management systems - Requirements Information technology - Security techniques - Guidelines for 110 ISO/IEC 27037:2012 identification, collection, acquisition and preservation of digital evidence Information technology - Security techniques - Specification for 111 ISO/IEC 27038:2014 digital redaction 112 ISO/IEC 27040:2015 Information technology - Security techniques - Storage security

Information technology - Security techniques - Guidance on 113 ISO/IEC 27041:2015 assuring suitability and adequacy of incident investigative method Information technology - Security techniques - Guidelines for the 114 ISO/IEC 27042:2015 analysis and interpretation of digital evidence Information technology - Security techniques - Incident 115 ISO/IEC 27043:2015 investigation principles and processes Information technology - Multimedia framework (MPEG-21) - Part 116 ISO/IEC 21000-21:2017 21: Media contract ontology 117 ISO 20700:2017 Guidelines for management consultancy services Refrigerated hydrocarbon and non-petroleum based liquefied 118 ISO 19970:2017 gaseous fuels - Metering of gas as fuel on LNG carriers during cargo transfer operations Cutting tool data representation and exchange - Part 2: 119 ISO/TS 13399-2:2014 Reference dictionary for the cutting items Cutting tool data representation and exchange - Part 3: 120 ISO/TS 13399-3:2014 Reference dictionary for tool items Cutting tool data representation and exchange - Part 4: 121 ISO/TS 13399-4:2014 Reference dictionary for adaptive items Cutting tool data representation and exchange - Part 5: 122 ISO/TS 13399-5:2014 Reference dictionary for assembly items Tyres - Electrical resistance - Test method for measuring 123 ISO 16392:2017 electrical resistance of tyres on a test rig 124 ISO 18844:2017 Photography - Digital cameras - Image flare measurement Gas cylinders -- Service life testing for cylinders and tubes of 125 ISO/TR 19811:2017 composite construction Plastics - Smoke generation - Part 2: Determination of optical 126 ISO 5659-2:2017 density by a single-chamber test Test methods for repair materials for water-leakage cracks in 127 ISO/TS 16774-1:2017 underground concrete structures - Part 1: Test method for thermal stability Test methods for repair materials for water-leakage cracks in 128 ISO/TS 16774-5:2017 underground concrete structures - Part 5: Test method for watertightness Test methods for repair materials for water-leakage cracks in 129 ISO/TS 16774-6:2017 underground concrete structures - Part 6: Test method for response to the substrate movement Nuclear fuel technology - Controlled-potential coulometric assay 130 ISO 12183:2016 of plutonium Nuclear Energy - Fuel technology - Determination of the O/M 131 ISO 21484:2017 ratio in MOX pellets by the gravimetric method 132 ISO 19490:2017 Dentistry - Sinus membrane elevator 133 ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking 134 ISO 5971:2017 Size designation of clothes - Tights Ophthalmic optics and instruments - Free form technology - 135 ISO/TR 18476:2017 Spectacle lenses and measurement Health informatics - Personal health device communication - Part 136 ISO/IEEE 11073-00103:2015 00103: Overview Health informatics - Personal health device communication - Part 137 ISO/IEEE 11073-10442:2015 10442: Device specialization - Strength fitness equipment Digital analytics and web analyses for purposes of market, 138 ISO 19731:2017 opinion and social research - Vocabulary and service requirements Nanotechnologies - Electron spin resonance (ESR) as a method 139 ISO/TS 18827:2017 for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials 140 ISO 19611:2017 Traditional Chinese medicine - Air extraction cupping device 141 ISO 19614:2017 Traditional Chinese medicine - Pulse graph force transducer Traditional Chinese medicine - Panax notoginseng root and 142 ISO 20409:2017 rhizome Railway applications - Quality management system - Business management system requirements for rail organizations: ISO 143 ISO/TS 22163:2017 9001:2015 and particular requirements for application in the rail sector Security and resilience - Community resilience - Guidelines for 144 ISO 22319:2017 planning the involvement of spontaneous volunteers