DOCSLIB.ORG

CS4070 Scanner Product Reference Guide (En)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
CS4070 Scanner Product Reference Guide (En) CS4070 SCANNER PRODUCT REFERENCE GUIDE CS4070 SCANNER PRODUCT REFERENCE GUIDE MN000762A07 Revision A December 2020 ii CS4070 Scanner Product Reference Guide No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. We grant to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without our prior written consent. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission. The user agrees to maintain our copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. Warranty For the complete hardware product warranty statement, go to: www.zebra.com/warranty. iii Revision History Changes to the original manual are listed below: Change Date Description -01 Rev A 8/2014 Initial release -02 Rev A 12/2014 Rebranded; various updates to connection and operation information, updated default for Sleep and BTSleep, updated 123Scan2 chapter, updated index -03 Rev A 3/2015 Updated URLs, added auto-reconnect beep description, added note to Scan Data Transmission Format -04 Rev A 9/2015 - Added Bluetooth button press requirement and Note for unpairing - Added 2 minute value to Connection Interval option - Added Notes to Prefix and Suffix descriptions in config.ini table - Added Unpair function to LED Indications table - Updated Auto-reconnect default - Added General Decoder Modes and User Preferences to User Preferences chapter - Added Bluetooth HID Keyboard Features section/parameters to User Preferences chapter - Added USB HID Keyboard Features (Dongle) chapter - Removed Bi-directional Redundancy parameter - Updated ADF chapter - Removed PF Key Standard Default Table in Appendix G -05 Rev A 1/2017 - Updated Notes under Batch Connection and Unpairing - Added Note to Editing the Configuration File section - Updated Config.ini table (Table 1-1) as follows: - Removed BarcodeDB - Updated description for ConnectionInterval - Added values to CountryKeyboardType - Updated Prefix entry cross-reference - Updated Scanner Parameters entry - Added details to Separator option - Added Note and a value to TimeFormat option - Changed default for WakeUpLED - Deleted Note for Deleting Bar Codes - Updated Transferring Data from a Batch Scanner information - Updated LED Indications table - Updated Clear All beeper indication - Added SSI numbers to all parameters - Reorganized User Preferences chapter - Added the following parameters to User Preferences/Bluetooth Options section: - Bluetooth Friendly Name - Link Supervision Timeout - Bluetooth HID Host Name - Added option information and Important note to Bluetooth Profile parameter - Updated Connection Interval parameter title and description - Added the following parameters to User Preferences/Bluetooth HID - Keyboard Features section: - Country Keyboard Type - Fast Bluetooth HID Keyboard iv CS4070 Scanner Product Reference Guide Change Date Description -05 Rev A 1/2017 - Added the following parameters to User Preferences/General Decode Settings (continued) section: - Batch Mode - Automatic Day/Night Mode - Out of Range Electric Fence - Continuous Bar Code Read, Unique Bar Code Reporting, Decode Session Timeout, Timeout Between Decodes (Same and Different Symbols) - WiFi Friendly Mode - Deleted Enable Hand-held Decode Aiming Pattern on PDF option - Deleted Illumination Brightness parameter - Added Note to Mute Beeper - Added Country Keyboard Type parameter to USB HID Keyboard Parameters - Added GS1 Data Matrix parameter - Added Chapter 6 Cordless Bluetooth Wedge - Updated 123Scan chapter and removed ADF chapter - Replaced Restore Defaults bar code in Troubleshooting with link to Reset Factory Defaults bar code - Added new code types to Code ID tables - Deleted statement after Character Equivalents table - Added Appendix G Alphanumeric Bar Codes - Updated ALT Key table in Appendix H - Added Appendix I CJK Decode Control -06 Rev A 4/2018 - Updated URLs (removed http://) - Updated copyright statement - Updated 123Scan chapter - Updated 123Scan2 to 123Scan -07 Rev A 12/2020 - Replaced master/slave references with central/peripheral. TABLE OF CONTENTS Warranty ......................................................................................................................................... ii Revision History.............................................................................................................................. iii About This Guide Introduction ..................................................................................................................................... xv Configurations................................................................................................................................. xv Accessories..................................................................................................................................... xv Chapter Descriptions ...................................................................................................................... xvi Notational Conventions................................................................................................................... xvii Related Documents ........................................................................................................................ xvii Service Information......................................................................................................................... xviii Chapter 1: Getting Started Introduction .................................................................................................................................... 1-1 Unpacking the Scanner .................................................................................................................. 1-2 Inserting and Removing the Battery ............................................................................................... 1-2 Inserting the Battery ................................................................................................................. 1-2 Removing the Battery .............................................................................................................. 1-3 Charging Batteries ......................................................................................................................... 1-4 Charging the Battery in a CS4070 ........................................................................................... 1-4 Charging Spare Batteries ......................................................................................................... 1-4 Charging Temperature ............................................................................................................. 1-4 Connecting to the Host Computer .................................................................................................. 1-5 Batch Connection ..................................................................................................................... 1-5 Bluetooth Connection: Development Options .......................................................................... 1-5 Serial Port Profile ............................................................................................................... 1-5 Human Interface Device Emulation .................................................................................... 1-5 Pairing ...................................................................................................................................... 1-6 Supported Devices ............................................................................................................. 1-6 Unpairing .................................................................................................................................. 1-7 Deleting the CS4070 from the Device List ............................................................................... 1-7 Configuring the Scanner ...............................................................................................................
Load more

Recommended publications
  • Xerox® Freeflow® VI Compose User Guide © 2020 Xerox Corporation
    Version 16.0.3.0 December 2020 702P08479 Xerox® FreeFlow® VI Compose User Guide © 2020 Xerox Corporation. All rights reserved. XEROX® and XEROX and Design®, FreeFlow®, FreeFlow Makeready®, FreeFlow Output Manager®, FreeFlow Process Manager®, VIPP®, and GlossMark® are trademarks of Xerox Corporation in the United States and/or other countries. Other company trademarks are acknowledged as follows: Adobe PDFL - Adobe PDF Library Copyright © 1987-2020 Adobe Systems Incorporated. Adobe®, the Adobe logo, Acrobat®, the Acrobat logo, Acrobat Reader®, Distiller®, Adobe PDF JobReady™, InDesign®, PostScript®, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated. The name PostScript is used as a product trademark for Adobe Systems implementation of the PostScript language interpreter, and other Adobe products. Copyright 1987-2020 Adobe Systems Incorporated and its licensors. All rights reserved. Includes Adobe® PDF Libraries and Adobe Normalizer technology. Intel®, Pentium®, Centrino®, and Xeon® are registered trademarks of Intel Corporation. Intel Core™ Duo is a trademark of Intel Corporation. Intelligent Mail® is a registered trademark of the United States Postal Service. Macintosh®, Mac®, and Mac OS® are registered trademarks of Apple, Inc., registered in the United States and other countries. Elements of Apple Technical User Documentation used by permission from Apple, Inc. Novell® and NetWare® are registered trademarks of Novell, Inc. in the United States and other countries. Oracle® is a registered trademark of Oracle Corporation Redwood City, California.
    [Show full text]
  • Gryphon™ I GD44XX General Purpose Corded Handheld Area Imager Bar Code Reader
    Gryphon™ I GD44XX General Purpose Corded Handheld Area Imager Bar Code Reader Quick Reference Guide Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the con- tents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclu- sive, revocable license to reproduce and transmit this documen- tation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic represen- tative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page. Disclaimer Datalogic has taken reasonable measures to provide informa- tion in this manual that is complete and accurate, however, Dat- alogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A.
    [Show full text]
  • US EPA Environmental Technology Verification
    Environmental Technology Verification Test Report of Mobile Source Emission Control Devices Paceco Corp. Mitsui Engineering & Shipbuilding Diesel Particulate Filter Prepared by Southwest Research Institute RTI International Under a Cooperative Agreement with U.S. Environmental Protection Agency THE ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM U.S. Environmental Protection Agency ETV Joint Verification Statement TECHNOLOGY TYPE: MOBILE DIESEL ENGINE AIR POLLUTION CONTROL APPLICATION: CONTROL OF EMISSIONS FROM MOBILE DIESEL ENGINES IN NONROAD USE BY DIESEL PARTICULATE FILTERS TECHNOLOGY NAME: MITSUI ENGINEERING & SHIPBUILDING – DIESEL PARTICULATE FILTER COMPANY: PACECO CORP. ADDRESS: 3854 BAY CENTER PLACE HAYWARD, CA 94545 PHONE: (510) 264-9288 FAX: (510) 264-9280 The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by accelerating the acceptance and use of improved and cost-effective technologies. ETV seeks to achieve this goal by providing high-quality, peer-reviewed data on technology performance to those involved in the design, distribution, financing, permitting, purchase, and use of environmental technologies. ETV works in partnership with recognized standards and testing organizations; stakeholder groups, which consist of buyers, vendor organizations, permitters,
    [Show full text]
  • DS3508 Digital Scanner Product Reference Guide (P/N 72E-124801
    DS3508 Digital Scanner Product Reference Guide DS3508 Digital Scanner Product Reference Guide 72E-124801-10 Revision B March 2015 ii DS3508 Product Reference Guide © 2015 Symbol Technologies, Inc. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.
    [Show full text]
  • ICR803 Bar Code Scanner
    BAR CODE MANUAL ICR 803 Bar Code Scanner Using This Manual This manual contains bar codes used to program the ICR803. For initial setup, product identification, and general product information, please refer to the following manuals: ICR803 Quick Start Manual ICR803 Command & Communication Guide Plug and Play Bar Codes Plug and Play bar codes provide instant engine set up for commonly used interfaces. Please note that the ICR803 interfaces are configured by the factory at time of order. These bar codes are therefore used to default the scanner to get back to the factory setup. RS-232 The RS-232 Interface bar code is used when connecting to the serial port of a PC or terminal. The following RS-232 Interface bar code also programs a carriage return (CR) and a line feed (LF) suffix, baud rate, and data format as indicated below: Option Setting Baud Rate 115200 bps Data Format 8 data bits, no parity bit, 1 stop bit RS-232 Interface USB HID Scan the following code to default the USB version of the ICR803 for USB HID bar code imagers. Scanning this code changes the terminal ID to 131. USB HID Bar Code Imager ICR803 Bar Code Manual – Rev A – 04/2007 - 2 - USB COM Port Emulation Scan the following code to program the USB version of the ICR803 to emulate a regular RS-232 based COM port. If you are using Microsoft Windows, you will need to install the USB Driver for the scanner. ICR803 Bar Code Manual – Rev A – 04/2007 - 3 - ICR803 Bar Code Manual – Rev A – 04/2007 - 4 - ICR803 Bar Code Manual – Rev A – 04/2007 - 5 - ICR803 Bar Code Manual – Rev A – 04/2007 - 6 - Good Read Indicators ICR803 Bar Code Manual – Rev A – 04/2007 - 7 - .
    [Show full text]
  • Dataman® Communications and Programming Guide
    DataMan® Communications and Programming Guide 2020 April 14 Revision: 6.1.6SR1.7 Legal Notices Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee. Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex Corporation makes no warranties, either express or implied, regarding the described software, its merchantability, non-infringement or its fitness for any particular purpose. The information in this document is subject to change without notice and should not be construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or the associated software. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor transferred to any other media or language without the written permission of Cognex Corporation. Copyright © 2019. Cognex Corporation. All Rights Reserved. Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as well as pending U.S.
    [Show full text]
  • Labelview 2019
    TUTORIAL The information contained in this guide is not of a contractual nature and may be subject to change without prior notice. The software described in this guide is sold under a license agreement. The software may be used, copied or reproduced only in accordance with the terms of the agreement. No part of this guide may be copied, reproduced or transmitted in any form, by any means or for any purpose other than the purchaser’s own use without the written permission of Teklynx Newco SAS. ©2019 Teklynx Newco SAS, All rights reserved. Table of Contents About this manual .................................................................................................................................... 5 Typographical conventions .................................................................................................................. 5 About your product ............................................................................................................................... 5 Connecting to a database ........................................................................................................................ 6 Overview .............................................................................................................................................. 6 Installing an ODBC data source........................................................................................................... 7 Importing data .....................................................................................................................................
    [Show full text]
  • Isoupdate May 2019
    ISO Update Supplement to ISOfocus May 2019 International Standards in process ISO/CD Agricultural machinery and tractors — Re- 22172-2 pair and maintenance information — Part 2: An International Standard is the result of an agreement between Diagnostics the member bodies of ISO. A first important step towards an Interna- ISO/CD 23130 Milking and cooling machine installa- tional Standard takes the form of a committee draft (CD) - this is cir- tions — Monitoring device for cooling tanks culated for study within an ISO technical committee. When consensus — Requirements has been reached within the technical committee, the document is ISO/CD 11839 Machinery for forestry — Glazing and panel sent to the Central Secretariat for processing as a draft International materials used in operator enclosures for Standard (DIS). The DIS requires approval by at least 75 % of the protection against thrown sawteeth — Test member bodies casting a vote. A confirmation vote is subsequently method and performance criteria carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD Agricultural and forestry machinery — Safety 11806-1 requirements and testing for portable, hand- held, powered brush-cutters and grass-trim- mers — Part 1: Machines fitted with an integral combustion engine ISO/CD Agricultural and forestry machinery — Safety 11806-2 requirements and testing for portable, hand- held, powered brush-cutters and grass- trimmers — Part 2: Machines for use with CD registered back-pack power unit TC 31 Tyres, rims and valves ISO/CD 3739-1 Industrial tyres and rims — Part 1: Pneumatic Period from 01 April to 30 April 2019 tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and These documents are currently under consideration in the technical marking committee.
    [Show full text]
  • 1704 2D Scanner RUGGED, VERSATILE
    CPL10075 1704-English outside final 41x29.3cm SPECIFICATIONS 1704 2D scanner RUGGED, VERSATILE 1704 1704DC (can capture A4 document) 704 Performance Category 2D barcode scanner Optical sensor 1280 (H) × 1024 (V) Light source Red LED 630 nm±20 nm 1 Resolution 3 mil 1D 6.67 mil 2D 5 mil 1D 6.67 mil 2D Code 39 3 mil 6.4 to 12 cm / 2.5 to 4.72 in. Code 39 5 mil 6.4 to 17.8 cm / 2.5 to 7 in. Code 39 5 mil 10.7 to 25.4 cm / 4.2 to 10 in. Code 39 7.5 mil 6.4 to 22.9 cm / 2.5 to 9 in. Code 39 7.5 mil 6.4 to 36.3 cm / 2.5 to 14.3 in. Depth of field UPCA 13 mil 6.4 to 25.4 cm / 2.5 to 10 in. UPCA 13 mil 6.4 to 41.4 cm / 2.5 to 16.3 in. at 80% MRD Code 39 20 mil 6.4 to 36.8 cm / 2.5 to 14.5 in. Code 39 20 mil 7.1 to 58.4 cm / 2.8 to 23 in. PDF 417 6.67 mil 7.6 to 17.3 cm / 3 to 6.8 in. PDF 417 6.67 mil 12.2 to 24.9 cm / 4.8 to 9.8 in. PDF 417 10 mil 7.6 to 19.8 cm / 3 to 7.8 in. PDF 417 10 mil 10.2 to 32.3 cm / 4 to 12.7 in.
    [Show full text]
  • Standards Published
    Standards published New International Standards published between 01 August and 31 August 2014 * Available in English only ** French version of standard previously published in English only Price group IIW International Institute of Welding Health and safety in welding and allied processes — Arc welding fume ISO/TR 13392:2014 * A components PC 245 Cross-border trade of second-hand goods ISO/TS 20245:2014 Cross-border trade of second-hand goods B TC 4 Rolling bearings ISO 3290-1:2014 * Rolling bearings — Balls — Part 1: Steel balls C ISO 3290-2:2014 * Rolling bearings — Balls — Part 2: Ceramic balls C TC 6 Paper, board and pulps ISO 2758:2014 Paper — Determination of bursting strength B ISO 5630-7:2014 * Paper and board — Accelerated ageing — Part 7: Exposure to light A TC 20 Aircraft and space vehicles ISO 21100:2014 * Air cargo unit load devices — Performance requirements and test parameters F TC 21 Equipment for fire protection and fire fighting Fire detection and alarm systems — Part 28: Fire protection control ISO 7240-28:2014 * E equipment TC 22 Road vehicles ISO/TS 18571:2014 * Road vehicles — Objective rating metric for non-ambiguous signals G Road vehicles — Measurement of driver visual behaviour with respect to ISO/TS 15007-2:2014 * transport information and control systems — Part 2: Equipment and C procedures TC 29 Small tools Polygonal taper interface with flange contact surface — Part 1: Dimensions ISO 26623-1:2014 * B and designation of shanks Polygonal taper interface with flange contact surface — Part 2: Dimensions ISO 26623-2:2014
    [Show full text]
  • Wasp Labeler User Manual
    Wasp Labeler Getting Started Wasp Labeler User Manual Chapter 1 - Getting Started 1.1 Introduction Thank you for your purchase of the Wasp Labeler barcode creation software. This topic contains information that will help familiarize you with barcodes and show you how to create customized barcodes. The Introductory Materials section contains important information you should familiarize yourself with prior to creating barcodes. Introductory Materials Wasp Labeler Capabilities What is a Barcode? Navigating the Main Screen Creating a Static Label Binding a Data Source to an Object Using String Builder to Concatenate Data Example Labels Barcode Symbology Reference After you have read the introductory materials, you are ready to start using Wasp Labeler. Click on the link below to go to the next step in the Getting Started section. Software activation system licensed under Patent No. 5,490,216 1 Wasp Labeler User Manual 1.2 Getting Started - Wasp Labeler Capabilities Wasp Labeler is a professional label generation application designed to meet the most demanding barcode labeling and printing requirements. Easily generate barcode labels, asset or inventory labels, address labels and envelopes with PostNet Zip Codes, ID badge labels, business checks, and date and time stamps for perishable goods, then print your labels from any local or network Windows printer. You can import data directly from your corporate databases or you can create a new Microsoft Access database. In addition, Wasp Labeler can generate compliance labels for practically every industry. Wasp Labeler: Supports the following barcode languages: AztecCode, Codabar, Code 128, Code 39, Code 93, DataMatrix, EanJan13, EanJan8, Interleaved2of5, Isbn, Itf14, MaxiCode, MicroPDF417, MicroQRCode, Msi, PDF417, Postnet, QRCode, GS1, GS1Stacked, GS1Omnidirectional, GS1Truncated, GS1Expanded, GS1Limited, UCCEAN128, UPC-A, UPC-E For a description of each of these symbologies, please refer to the Barcode Symbology Reference.
    [Show full text]
  • Criteria Emissions from the Main Propulsion Engine of a Post-Panamax Class Container Vessel Using Distillate and Residual Fuels
    Criteria Emissions from the Main Propulsion Engine of a Post-Panamax Class Container Vessel Using Distillate and Residual Fuels Draft Final Report (04_09_2009) Contract # 06-412 Prepared for: California Air Resources Board 1001 I Street, Sacramento, CA 95814 Authors: Dr. J. W. Miller Mr. Harshit Agrawal Mr. William A. Welch University of California, Riverside College of Engineering-Center for Environmental Research and Technology Riverside, CA 92521 Emissions from the Main Propulsion Engine of a Container Vessel Disclaimer This report was prepared as the result of work sponsored by the California Air Resources Board (CARB) and carried out with a major shipping company. As such the report does not necessarily represent the views of CARB and the partnering shipping company. Further the collective participants, its employees, contractors and subcontractors make no warrant, express or implied, and assume no legal liability for the information in this report; nor does any party represent that the uses of this information will not infringe upon privately owned rights. This report has neither been approved nor disapproved by the collective group of participants nor have they passed upon the accuracy or adequacy of the information in this report. 2 Emissions from the Main Propulsion Engine of a Container Vessel Acknowledgements The author expresses appreciation to the California Air Resources Board for funding the project and to the following associates who contributed much to the success of a project that enabled more to be learned about emissions from the main propulsion engines of a large container vessel. Not specifically mentioned below but essential to the success of this project was the support of the many people at the shipping company that volunteered their vessel and enabled this testing to be carried out.
    [Show full text]