ISO Update Supplement to ISOfocus

July 2020

International Standards in process

ISO/CD 6469-2 Electrically propelled road vehicles — Safety specifications — Part 2: Vehicle operational safety An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna- ISO/CD 6460-1 Motorcycles — Measurement method for gase- tional Standard takes the form of a committee draft (CD) - this is cir- ous exhaust emissions and fuel consumption culated for study within an ISO technical committee. When consensus — Part 1: General test requirements has been reached within the technical committee, the document is ISO/CD TS Road vehicles — Ergonomic aspects of trans- sent to the Central Secretariat for processing as a draft International 16951 port information and control systems (TICS) — Standard (DIS). The DIS requires approval by at least 75 % of the Procedures for determining priority of on-board member bodies casting a vote. A confirmation vote is subsequently messages presented to drivers carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 14982 Agricultural and forestry machinery — Electro- magnetic compatibility — Test methods and acceptance criteria TC 29 Small tools ISO/CD Tools for pressing — Gas springs — Part 3: 11901-3 Gas spring with increased spring force and CD registered compact built height ISO/CD Tools for pressing — Gas springs — Part 4: 11901-4 Gas springs with increased spring force and same built height Period from 01 June to 01 July 2020 These documents are currently under consideration in the technical TC 30 Measurement of fluid flow in closed committee. conduits They have been registred at the Central Secretariat. ISO/CD 5167-1 Measurement of fluid flow by means of pres- sure differential devices inserted in circular cross-section conduits running full — Part 1: TC 6 Paper, board and pulps General principles and requirements ISO/CD Tissue paper and tissue products — Part 4: ISO/CD 5167-2 Measurement of fluid flow by means of pres- 12625-4 Determination of tensile strength, stretch at sure differential devices inserted in circular maximum force and tensile energy absorption cross-section conduits running full — Part 2: Orifice plates ISO/CD 13820 Paper, board and corrugated fibreboard — Description and calibration of compression- ISO/CD 5167-4 Measurement of fluid flow by means of pres- testing equipment sure differential devices inserted in circular cross-section conduits running full — Part 4: TC 10 Technical product documentation Venturi tubes ISO/CD Industrial systems, installations and equip- TC 34 Food products 81346-10.2 ment and industrial products — Structuring principles and reference designation — Part ISO/CD TR Rapeseed — Determination of glucosinolate 10: Power plants 12788 content — Spectrometric method for total glucosinolates by glucose release TC 21 Equipment for fire protection and fire fighting TC 35 Paints and varnishes ISO/CD Fire detection and fire alarm systems — Part ISO/CD 17463 Paints and varnishes — Guidelines for the 7240-31 31: Resettable line-type heat detectors determination of anticorrosive properties of organic coatings by accelerated cyclic electro- ISO/CD 12239 Smoke alarms using scattered light, transmit- chemical technique ted light or ionization ISO/CD Paints and varnishes — Wettability — Part 1: TC 22 Road vehicles 19403-1 Terminology and general principles ISO/CD Road vehicles — Vehicle to grid commu- ISO/CD 11128 Preparation of steel substrates before applica- 15118-9 nication interface — Part 9: Physical and tion of paints and related products — Specifi- data link layer conformance test for wireless cations for metallic blast-cleaning abrasives communication TC 38 Textiles ISO/CD Road vehicles — Automotive cables — Part 1: 19642-1 Vocabulary and design guidelines ISO/CD 2076 Textiles — Man-made fibres — Generic names ISO/CD Road vehicles — Automotive cables — Part 2: TC 42 Photography 19642-2 Test methods ISO/CD TR Graphic technology and photography — Colour ISO/CD Road vehicles — Automotive cables — Part 11: 17321-5 characterization of digital still cameras (DSCs) 19642-11 Dimensions and requirements for coaxial RF — Part 5: Colour targets including saturated cables with a specified analog bandwidth up to colours for colour characteristic evaluation test 6 GHz (20 GHZ) for colorimetric image capture ISO/CD Road vehicles — Automotive cables — Part 12: TC 44 Welding and allied processes 19642-12 Unscreened paired or quad RF cables with a ISO/CD 5817 Welding — Fusion-welded joints in steel, specified analog bandwidth up to 1 GHz nickel, titanium and their alloys (beam welding ISO/CD Road vehicles — Information for first and excluded) — Quality levels for imperfections 17840-1 second responders — Part 1: Rescue sheet for passenger cars and light commercial vehicles

ISO Update, Supplement to ISO Focus -- July 2020 1 ISO/CD 15610 Specification and qualification of welding pro- ISO/CD 4669 Document Management — Controlled sharing cedures for metallic materials — Qualification of digital documents based on tested welding consumables TC 174 Jewellery and precious metals ISO/CD 24255 Welding ― Welding of reinforcing steel ISO/CD 11596 Jewellery and precious metal — Sampling of TC 45 Rubber and rubber products precious metal and precious metal alloys ISO/CD 8330.2 Rubber and plastics hoses and hose assem- TC 184 Automation systems and integration blies — Vocabulary ISO/IEC CD TR Smart manufacturing standards map — Part 1: TC 46 Information and documentation 63306-1 Framework ISO/CD 18626 Information and documentation — Interlibrary IEC/CD TR A meta-modelling analysis approach to smart Loan Transactions 63319 manufacturing reference models TC 48 Laboratory equipment ISO/CD Data quality — Part 150: Master data: Quality 8000-150 management framework ISO/CD 22916 Laboratory equipment — Interoperability of microfluidic devices TC 189 Ceramic tile TC 58 Gas cylinders ISO/CD Ceramic tiles — Part 18: Determination of Light 10545-18 Reflectance Value (LRV) ISO/CD 23826 Gas cylinders — Ball valves — Specification and testing ISO/CD Ceramic tiles — Part 20: Determination of 10545-20 deflection of ceramic tiles for calculating their TC 61 Plastics radius of curvature ISO/CD TS Plastics — Determination of fracture toughness ISO/CD Ceramic tiles — Part 21: Determination of 20979 of polyethylene (PE) under plane stress impact 10545-21 reverse staining resistance conditions TC 197 Hydrogen technologies TC 68 Financial services ISO/CD Gaseous hydrogen — Fueling stations — Part ISO/CD 24366 Natural Persons Identifier 19880-6 6: Fittings TC 96 Cranes TC 198 Sterilization of health care products ISO/CD Cranes — Safe use — Part 2: Mobile Cranes ISO/CD Washer-disinfectors — Part 1: General require- 12480-2 15883-1 ments, terms and definitions and tests TC 108 Mechanical vibration, shock and condi- ISO/CD TS Packaging for terminally sterilized medical tion monitoring 16775 devices — Guidance on the application of ISO ISO/CD Mechanical vibration — Measurement and 11607-1 and ISO 11607-2 20816-3 evaluation of machine vibration — Part 3: Cou- TC 201 Surface chemical analysis pled industrial machines ISO/CD Surface chemical analysis — Vocabulary — ISO/CD Mechanical vibration — Rotor balancing — 18115-3 Part 3: terms used in optical interface analysis 21940-21 Part 21: Description and evaluation of balanc- ing machines TC 202 Microbeam analysis ISO/CD Mechanical vibration — Torsional vibration ISO/CD 23749 Microbeam analysis - Electron backscatter 22266-1 of rotating machinery — Part 1: Evaluation of diffraction Quantitative - Determination of steam and gas turbine generator sets due to austenite in steel electrical excitation ISO/CD TS Qualification of the scanning electron micro- TC 123 Plain bearings 21383.2 scope for quantitative measurements ISO/CD 22507 Plain bearings — Fluid film bearing materials TC 211 Geographic information/Geomatics for vehicular turbocharger ISO/CD Addressing — Part 6: Digital interchange TC 130 Graphic technology 19160-6 models ISO/CD Graphic technology — Safety requirements for TC 212 Clinical laboratory testing and in vitro 12643-5 graphic technology equipment and systems diagnostic test systems — Part 5: Manually-fed stand-alone platen ISO/CD 16256 Clinical laboratory testing and in vitro diag- presses nostic test systems — Reference method for ISO/CD Graphic technology — Processless plates — testing the in vitro activity of antimicrobial 24487-1 Part 1: Part 1: Evaluation methods for charac- agents against yeast fungi involved in infec- teristics and performance tious diseases TC 138 Plastics pipes, fittings and valves for TC 215 Health informatics the transport of fluids ISO/CD TS Health informatics — Terminological resources ISO/CD TS ISO/TS 23818-3 Assessment of conformity of 17117-2 — Part 2: Implementation Capability (TIC) 23818-3 plastics piping systems for the rehabilitation ISO/CD TS Health informatics — Medical waveform format of existing pipelines — Part 3: Unplasticised 22077-5 — Part 5: Neurophysiological signals poly(vinyl chloride) (PVC-U) material ISO/CD TS Health Informatics — Categorial structure for TC 150 Implants for surgery 23541-1 representation of 3D human body position ISO/CD 9584 Implants for surgery — Non-destructive testing system — Part 1: Bones — Radiographic examination of cast metallic TC 229 Nanotechnologies surgical implants ISO/CD TS Label-free impedance technology to assess the TC 159 Ergonomics 21633 toxicity of nanomaterials in Vitro ISO/CD Ergonomics of human-system interaction — ISO/CD TS Nanotechnologies — Particle size distribution 9241-20 Part 20: An ergonomic approach to accessibil- 23151 for cellulose nanocrystals ity within the ISO 9241 series IEC/CD TR Measurement of film thickness of nanomateri- TC 171 Document management applications 63258 als by using ellipsometry TC 249 Traditional Chinese medicine

2 ISO Update, Supplement to ISO Focus -- July 2020 ISO/CD 22586 Traditional Chinese Medicine-Paeonia lactiflora root－White peony root ISO/CD 23419 Traditional Chinese medicine — General re- quirement of manufacturing procedure and its quality assurance for granules ISO/CD 23956 Traditional Chinese medicine — Determination of benzopyrene in processed natural products DIS circulated TC 256 Pigments, dyestuffs and extenders ISO/CD 788 Ultramarine pigments for paints Period from 01 June to 01 July 2020 TC 260 Human resource management These documents have obtained substantial support within the ap- ISO/CD TS Human resource management: Leadership propriate ISO technical committee. 30431 metrics cluster They have been submitted to the ISO member bodies for voting by ISO/CD TS Human resource management: Workforce the date shown. 30432 productivity metrics cluster * Available in English only ISO/CD TS Human resource management — Succession 30433 planning metrics TC 281 Fine bubble technology Vote terminates ISO/CD TR Fine bubble technology - Agricultural applica-

23016-3 tions — Part 3: Guideline for promoting the germination of barley seeds in the region of TC 2 Fasteners lower number concentration of ultrafine bubble ISO/DIS 4014 Hexagon head bolts — Product (UFB) grades A and B ISO/CD TS Fine bubble technology – Guideline for system- 2020-09-16 24217-2 atic standardization of fine bubble technologies — Part 2: Assignment of sustainable develop- (Revision of ISO 4014:2011) ment goals (SDGs) to fine bubble applications ISO/DIS 4015 Hexagon head bolts with ISO/CD Fine bubble technology — Elimination method reduced shank (shank diameter 24261-2 for sample characterization — Part 2: Elimina- ≈ pitch diameter) — Product 2020-09-16 tion techniques grade B CASCO Committee on conformity assessment (Revision of ISO 4015:1979) ISO/DIS 4016 Hexagon head bolts — Product ISO/IEC CD Conformity assessment — General require- grade C 17030 ments for third-party marks of conformity 2020-09-16 JTC 1 Information technology ISO/IEC CD Software engineering — Software life cycle (Revision of ISO 4016:2011) 14764 processes — Maintenance ISO/DIS 4017 Hexagon head screws — Prod- ISO/IEC CD Software and systems engineering — Certi- uct grades A and B 24773-2 fication of software and systems engineering 2020-09-16 professionals — Part 2: Guidance Regarding Description of Knowledge, Skills, and Compe- (Revision of ISO 4017:2014) tencies contained in Schemes ISO/DIS 4018 Hexagon head screws — Prod- ISO/IEC CD TR Software and systems engineering — Software uct grade C 29119-6 testing — Part 6: Guidelines for the use of ISO/ 2020-09-16 IEC/IEEE 29119 in Agile projects (Revision of ISO 4018:2011) ISO/IEC DIS Information security — Key management — 11770-7 Part 7: Cross-domain password-based authen- ISO/DIS 8676 Hexagon head screws with met- ticated key exchange ric fine pitch thread — Product grades A and B 2020-09-17 ISO/IEC CD Information technology — Security techniques 15946-5 — Cryptographic techniques based on elliptic (Revision of ISO 8676:2011) curves — Part 5: Elliptic curve generation ISO/DIS 8765 Hexagon head bolts with metric ISO/IEC CD TS IT Security Techniques — Requirements for fine pitch thread — Product 23532-1 the competence of IT security testing and grades A and B 2020-09-17 evaluation laboratories — Part 1: Testing and evaluation for ISO/IEC 15408 (Revision of ISO 8765:2011) ISO/IEC CD Information technology — Data centres — Key TC 6 Paper, board and pulps 30134-8.3 performance indicators — Part 8: Carbon Us- age Effectiveness (CUE) ISO/DIS Paper and board — Determina- 8791-4 tion of roughness/smoothness ISO/IEC CD Information technology — Data centres — Key (air leak methods) — Part 4: 2020-09-14 30134-9.3 performance indicators — Part 9: Water Usage Print-surf method Effectiveness (WUE) (Revision of ISO 8791-4:2007) ISO/IEC CD Information Technology — Artificial Intelligence TC 8 Ships and marine 23894 — Risk Management technology ISO/IEC CD Information technology — Governance of IT — ISO Ships and marine technol- 38507 Governance implications of the use of artificial 15372:2000/ ogy — Inflatable rescue boats intelligence by organizations DAmd 1 — Coated fabrics for inflatable 2020-08-26

chambers — Amendment 1: Oil- resistance test TC 17 Steel

ISO Update, Supplement to ISO Focus -- July 2020 3 ISO/DIS Steel wire and wire products — TC 24 Particle characterization 7989-2 Non-ferrous metallic coatings including sieving on steel wire — Part 2: Zinc or 2020-09-14 zinc-alloy coating ISO/DIS Pore size distribution and poros- (Revision of ISO 7989-2:2007) 15901-2 ity of solid materials by mercury porosimetry and gas adsorption 2020-09-08 TC 20 Aircraft and space vehicles — Part 2: Analysis of nanopores ISO/DIS 16781 Space systems — Simulation by gas adsorption requirements for control system (Revision of ISO 15901-2:2006, 2020-09-08 ISO 15901-2:2006/Cor 1:2007) TC 28 Petroleum and related (Revision of ISO 16781:2013) products, fuels and lu- TC 21 Equipment for fire protec- bricants from natural or tion and fire fighting synthetic sources ISO/DIS Fire extinguishing media — ISO 4259- Petroleum and related products 7203-4 Foam concentrates — Part 4: 1:2017/DAmd — Precision of measurement Specification for Class A foam 2020-09-02 2 methods and results — Part 1: 2020-09-02 concentrates for application on Determination of precision data Class A fires in relation to methods of test — Amendment 2: Updating defini- TC 22 Road vehicles tion of r and R ISO/DIS Road vehicles — Video com- TC 31 Tyres, rims and valves 17215-3 munication interface for cameras (VCIC) — Part 3: Camera mes- 2020-09-02 ISO/DIS 18808 Agricultural tyres for construction sage dictionary machines (Revision of ISO 17215-3:2014) 2020-08-24

ISO/DIS Road vehicles — Vehicle domain (Revision of ISO 13442:2004) 23239-1 service — Part 1: General infor- mation and use case definitions 2020-09-02 ISO/DIS Bicycle tyres and rims — Part 5775-2 2: Rims 2020-09-23 ISO/DIS Internal combustion engines —

18669-1 Piston pins — Part 1: General (Revision of ISO 5775-2:2015) specifications 2020-08-24 TC 34 Food products (Revision of ISO 18669-1:2013) ISO/DIS 771 Oilseed meals — Determination ISO/DIS Road vehicles — Liquefied of moisture and volatile matter 12614-8 natural gas (LNG) fuel system content 2020-09-14 components — Part 8: Excess 2020-09-01 flow valve (Revision of ISO 771:1977) (Revision of ISO 12614-8:2014) ISO/DIS 18449 Green tea — Vocabulary ISO/DIS Road vehicles — Liquefied 12614-18 natural gas (LNG) fuel system 2020-09-08 components — Part 18: Gas 2020-09-01 temperature sensor TC 35 Paints and varnishes (Revision of ISO 12614-18:2014) ISO/DIS Paints and varnishes — Electro- ISO/DIS Road vehicles — Liquefied 22553-14 deposition coatings — Part 14: 12614-19 natural gas (LNG) fuel system Deposition behaviour 2020-09-15 components — Part 19: Auto- 2020-09-01

matic valve (Revision of ISO 12614-19:2017) ISO/DIS Paints and varnishes — Evalu- 28199-1 ation of properties of coating TC 23 Tractors and machinery for systems related to the applica- 2020-09-15 agriculture and forestry tion process — Part 1: Relevant ISO/DIS Agricultural and forestry ma- vocabulary and preparation of 11806-1 chinery — Safety requirements test panels and testing for portable, hand- 2020-09-10 (Revision of ISO 28199-1:2009, held, powered brush-cutters ISO 28199-1:2009/Cor 1:2009) and grass-trimmers — Part 1: ISO/DIS Paints and varnishes — Evalu- Machines fitted with an integral 28199-2 ation of properties of coating combustion engine systems related to the applica- 2020-09-15 (Revision of ISO 11806-1:2011) tion process — Part 2: Colour ISO/DIS Agricultural and forestry ma- stability, process hiding power, 11806-2 chinery — Safety requirements re-dissolving, overspray absorp- and testing for portable, hand- 2020-09-10 tion, wetting, surface texture and held, powered brush-cutters mottling and grass-trimmers — Part 2: (Revision of ISO 28199-2:2009) Machines for use with back-pack ISO/DIS Paints and varnishes — Evalua- power unit 28199-3 tion of properties of coating sys- (Revision of ISO 11806-2:2011) tems related to the application 2020-09-15 ISO/DIS Agricultural irrigation equipment process — Part 3: Assessment 15886-3 — Sprinklers — Part 3: Charac- of sagging, formation of bubbles, terization of distribution and test 2020-09-21 pinholing and hiding power methods (Revision of ISO 28199-3:2009) (Revision of ISO 15886-3:2012, TC 38 Textiles ISO 15886-3:2012/Amd 1:2016)

4 ISO Update, Supplement to ISO Focus -- July 2020 ISO/DIS 1140 Fibre ropes — Polyamide — 3-, ISO/DIS 8205 Resistance welding equipment 4-, 8- and 12-strand ropes — Water-cooled secondary con- 2020-09-03 nection cables — Dimensions 2020-08-28 and requirements for double- (Revision of ISO 1140:2012) conductor connection cables (Revision of ISO 8205- ISO/DIS 1141 Fibre ropes — Polyester — 3-, 1:2002, ISO 8205-3:2012, ISO 4-, 8- and 12-strand ropes 8205-2:2002) 2020-09-03 ISO/DIS 23598 Mechanical joining — Destruc- (Revision of ISO 1141:2012) tive testing of joints — Specimen dimensions and test procedure 2020-09-03 ISO/DIS 1346 Fibre ropes — Polypropylene for mechanized peel testing of split film, monofilament and mul- single joints tifilament (PP2) and polypropyl- 2020-09-08 ene high-tenacity multifilament TC 45 Rubber and rubber (PP3) — 3-, 4-, 8- and 12-strand products ropes (Revision of ISO 1346:2012) ISO/DIS 18752 Rubber hoses and hose as- semblies — Wire- or textile- ISO/DIS Textiles — Quantitative chemical reinforced single-pressure 2020-09-03 1833-22 analysis — Part 22: Mixtures of types for hydraulic applications viscose or certain types of cupro 2020-09-08 — Specification or modal or lyocell with flax (Revision of ISO 18752:2014) fibres (method using formic acid and zinc chloride) ISO/DIS 20444 Rubber and plastics hoses — (Revision of ISO 1833-22:2013) Determination of abrasion resist- ance of the outer cover 2020-09-03 ISO/DIS Textiles — Determination of 2313-1 the recovery from creasing of a folded specimen of fabric by 2020-09-08 TC 58 Gas cylinders measuring the angle of recovery ISO/DIS Gas cylinders — Parallel threads — Part 1: Method of the horizon- 15245-1 for connection of valves to gas tally folded specimen cylinders — Part 1: Specification 2020-08-27 (Revision of ISO 2313:1972) ISO/DIS Textiles — Determination of (Revision of ISO 15245-1:2001) 2313-2 the recovery from creasing of ISO Gas cylinders — Refillable a folded specimen of fabric by 2020-09-08 7866:2012/ seamless aluminium alloy gas measuring the angle of recovery DAmd 1 cylinders — Design, construction 2020-08-24 — Part 2: Method of the verti- and testing — Amendment 1 cally folded specimen (Revision of ISO 2313:1972) TC 61 Plastics TC 43 Acoustics ISO/DIS 871 Plastics — Determination of igni- tion temperature using a hot-air ISO/DIS Acoustics — Laboratory meas- furnace 2020-09-01 10140-1 urement of sound insulation of building elements — Part 1: 2020-09-11 (Revision of ISO 871:2006) Application rules for specific ISO/DIS 8985 Plastics — Ethylene/vinyl acetate products copolymer (EVAC) thermoplas- (Revision of ISO 10140-1:2016) tics — Determination of vinyl 2020-09-21 ISO/DIS Acoustics — Laboratory meas- acetate content 10140-2 urement of sound insulation (Revision of ISO 8985:1998) of building elements — Part 2: 2020-09-11 ISO/DIS 16152 Plastics — Determination Measurement of airborne sound of xylene-soluble matter in insulation polypropylene 2020-09-15 (Revision of ISO 10140-2:2010)

ISO/DIS Acoustics — Laboratory meas- (Revision of ISO 16152:2005) 10140-3 urement of sound insulation ISO/DIS 24047 Plastics — Polyethylene (PE) and of building elements — Part 3: 2020-09-11 polypropylene (PP) thermoplas- Measurement of impact sound tics — Determination of metal 2020-09-10 insulation content by ICP-OES (Revision of ISO 10140-3:2010) ISO/DIS 24076 Plastics — Polypropylene (PP) — ISO/DIS Acoustics — Laboratory meas- Determination of isotactic index 10140-4 urement of sound insulation by low-resolution nuclear mag- 2020-09-15 of building elements — Part 4: 2020-09-11 netic resonance spectrometry Measurement procedures and requirements ISO/DIS 14632 Extruded sheets of polyethylene (Revision of ISO 10140-4:2010) (PE-HD) — Requirements and test methods 2020-09-03 ISO/DIS Acoustics — Laboratory meas-

10140-5 urement of sound insulation (Revision of ISO 14632:1998) of building elements — Part 5: 2020-09-11 Requirements for test facilities ISO/DIS 527-4 Plastics — Determination of and equipment tensile properties — Part 4: Test (Revision of ISO 10140-5:2010) conditions for isotropic and or- 2020-09-23 thotropic fibre-reinforced plastic TC 44 Welding and allied composites processes (Revision of ISO 527-4:1997)

ISO Update, Supplement to ISO Focus -- July 2020 5 ISO/DIS 527-5 Plastics — Determination of ISO/DIS 24234 Dentistry — Dental amalgam tensile properties — Part 5: Test conditions for unidirec- 2020-09-23 2020-08-24 tional fibre-reinforced plastic composites (Revision of ISO 24234:2015) (Revision of ISO 527-5:2009) TC 107 Metallic and other inorgan- TC 67 Materials, equipment and ic coatings offshore structures for pe- ISO/DIS 3613 Metallic and other inorganic troleum, petrochemical and coatings — Chromate conver- natural gas industries sion coatings on zinc, cadmium, 2020-09-14 ISO/DIS Installation and equipment for aluminium-zinc alloys and 20257-2 liquefied natural gas - Design of zinc-aluminium alloys — Test floating LNG installations — Part 2020-09-11 methods 2: Specific FSRU issues (Revision of ISO 3613:2010) TC 68 Financial services TC 108 Mechanical vibration, shock and condition ISO/DIS Improving transparency in 5116-1 financial and business reporting monitoring — Harmonisation topics — Part 2020-09-01 ISO 21940- Mechanical vibration — Rotor 1: European data point method- 11:2016/DAmd balancing — Part 11: Procedures ology for supervisory reporting 1 and tolerances for rotors with 2020-09-14 rigid behaviour — Amendment 1 ISO/DIS Improving transparency in 5116-2 financial and business report- ISO 21940- Mechanical vibration — Rotor ing — Harmonisation topics — 2020-09-01 14:2012/DAmd balancing — Part 14: Procedures Part 2: Guidelines for data point 1 for assessing balance errors — 2020-09-14 modelling Amendment 1 ISO/DIS Improving transparency in TC 113 Hydrometry 5116-3 financial and business reporting ISO/DIS 748 Hydrometry — Measurement — Harmonisation topics — Part 2020-09-11 of liquid flow in open channels 3: Mapping between DPM and — Velocity area methods using 2020-09-10 MDM point velocity measurements TC 71 Concrete, reinforced (Revision of ISO 748:2007) concrete and pre-stressed ISO/DIS 23350 Hydrometry — catching-type concrete liquid precipitation measuring ISO/DIS 22873 Quality control for batching and gauges 2020-09-11 mixing steel fibre-reinforced concretes 2020-09-02 TC 122 Packaging

ISO/DIS Transport Packaging — Tem- TC 79 Light metals and their 22982-2 perature controlled transport alloys packages for parcel shipping — 2020-09-16 ISO/DIS 10074 Anodizing of aluminium and its Part 2: General specifications of alloys — Specification for hard testing anodic oxidation coatings on 2020-09-02 TC 123 Plain bearings aluminium and its alloys ISO/DIS Plain bearings — Hydrostatic (Revision of ISO 10074:2017) 12167-2 plain journal bearings with drain- ISO/DIS 23694 Wrought magnesium and mag- age grooves under steady-state 2020-09-01 nesium alloys — Extruded rods/ conditions — Part 2: Character- bars and tubes 2020-09-10 istic values for the calculation of oil-lubricated plain journal bear- ISO/DIS 23700 Wrought magnesium and mag- ings with drainage grooves nesium alloys — Rolled plates (Revision of ISO 12167-2:2001) and sheets 2020-09-14 TC 130 Graphic technology

ISO Graphic technology — Determi- TC 83 Sports and other rec- 21632:2018/ nation of the energy consump- reational facilities and DAmd 1 tion of digital printing devices 2020-09-10 equipment including transitional and related modes — Amendment 1 ISO/DIS Stationary training equipment 20957-6 — Part 6: Treadmills, additional TC 131 Fluid power systems specific safety requirements and 2020-09-09 ISO/DIS 11943 Hydraulic fluid power — Online test methods automatic particle-counting (Revision of ISO 20957-6:2005) systems for liquids — Methods 2020-09-14 TC 94 Personal safety -- Personal of calibration and validation protective equipment (Revision of ISO 11943:2018) ISO Protective clothing — Protection TC 138 Plastics pipes, fittings and 19918:2017/ against chemicals — Measure- valves for the transport of DAmd 1 ment of cumulative permeation 2020-08-31 fluids of chemicals with low vapour pressure through materials — Amendment 1: Extraction and chemical analysis TC 106 Dentistry

6 ISO Update, Supplement to ISO Focus -- July 2020 ISO/DIS Plastics piping systems for (Revision of ISO 9999:2016) 16486-5 the supply of gaseous fuels — TC 188 Small craft Unplasticized polyamide (PA-U) 2020-08-31 ISO/DIS 9094 Small craft — Fire protection piping systems with fusion

jointing and mechanical jointing 2020-09-17 — Part 5: Fitness for purpose of

the system (Revision of ISO 9094:2015) (Revision of ISO 16486-5:2012) ISO/DIS 17885 Plastics piping systems — TC 189 Ceramic tile Mechanical fittings for pressure ISO/DIS Quantitative determination of piping systems — Specifications 2020-09-01 17721-1 antibacterial activity of ceramic tile surfaces — Test methods — 2020-09-22 (Revision of ISO 17885:2015, Part 1: Ceramic tile surfaces with ISO 17885:2015/Amd 1:2016) incorporated antibacterial agents TC 142 Cleaning equipment for air ISO/DIS Quantitative determination of and other gases 17721-2 antibacterial activity of ceramic tile surfaces — Test methods 2020-09-22 ISO/DIS Air filters for general ventila- — Part 2: Ceramic tile surfaces 16890-2 tion — Part 2: Measurement of with incorporated photocatalytic fractional efficiency and air flow 2020-09-01 antibacterial agents resistance (Revision of ISO 16890-2:2016) TC 197 Hydrogen technologies TC 146 Air quality ISO 19880- Gaseous hydrogen — Fuelling 8:2019/DAmd stations — Part 8: Fuel quality ISO/DIS Interior air of road vehicles 1 control — Amendment 1 2020-09-22 12219-1 — Part 1: Whole vehicle test chamber — Specification and 2020-09-10 method for the determination of TC 199 Safety of machinery volatile organic compounds in ISO/DIS Safety of machinery — Safety- cabin interiors 13849-1 related parts of control systems (Revision of ISO 12219-1:2012) — Part 1: General principles for 2020-08-31 TC 147 Water quality design (Revision of ISO 13849-1:2015) ISO/DIS 22104 Water quality — Determina- tion of microcystins — Method TC 202 Microbeam analysis using liquid chromatography 2020-09-23 ISO/DIS 23420 Microbeam analysis — Analytical and tandem mass spectrometry electron microscopy — Method (LC-MS/MS) for the determination of energy 2020-09-14 ISO/DIS 13163 Water quality — Lead-210 — resolution for electron energy Test method using liquid scintil- loss spectrum analysis lation counting 2020-09-15 TC 205 Building environment

design (Revision of ISO 13163:2013) ISO/DIS Building environment design TC 150 Implants for surgery 11855-5 — Embedded radiant heating ISO 13779- Implants for surgery — Hy- and cooling systems — Part 5: 2020-09-01 3:2018/DAmd droxyapatite — Part 3: Chemical Installation 1 analysis and characterization 2020-08-24 (Revision of ISO 11855-5:2012) of crystallinity ratio and phase TC 206 Fine ceramics purity — Amendment 1 ISO/DIS 23946 Fine ceramics (advanced TC 172 Optics and photonics ceramics, advanced techni- ISO/DIS 23364 Optics and Photonics — Bulk cal ceramics) — Test meth- 2020-08-25 absorption optical filters ods for optical properties of 2020-09-02 ceramic phosphors for white light emitting diodes using a Gonio-spectrofluorometer TC 173 Assistive products ISO/DIS 10535 Hoists for the transfer of disa- TC 207 Environmental bled persons — Requirements management and test methods 2020-09-11 ISO/DIS Stationary source emissions — 19694-1 Determination of greenhouse gas (Revision of ISO 10535:2006) (GHG) emissions in energy-inten- 2020-08-27 ISO/DIS Assistive products for walking, sive industries — Part 1: General 11199-1 manipulated by both arms — aspects Requirements and test methods 2020-09-03 TC 211 Geographic information/ — Part 1: Walking frames Geomatics (Revision of ISO 11199-1:1999) ISO/DIS 19148 Geographic information — Linear ISO/DIS Assistive products for walking, referencing 11199-2 manipulated by both arms — 2020-09-22 Requirements and test methods 2020-09-03 — Part 2: Rollators (Revision of ISO 19148:2012) (Revision of ISO 11199-2:2005) TC 232 Education and learning ISO/DIS 9999 Assistive products — Classifica- services tion and terminology 2020-09-14

ISO Update, Supplement to ISO Focus -- July 2020 7 ISO/DIS 29994 Learning services — Addi- ISO/DGuide 83 High level structure and identical tional requirements for distance text for management system learning 2020-08-28 standards and common core 2020-08-27 management system terms and definitions ISO/DIS 29995 Education and learning services — Terminology JTC 1 Information technology 2020-08-27 ISO/IEC DIS Information technology — Soft-

5055 ware measurement — Software TC 258 Project, programme and quality measurement — Au- 2020-08-27 portfolio management tomated source code quality measures ISO/DIS 21500 Project, programme and portfolio management — Context and ISO/IEC DIS Information technology — Open- concepts 2020-08-27 5230 Chain Specification 2020-09-23 (Revision of ISO 21500:2012) ISO/DIS 21502 Project, programme and portfolio ISO/IEC DIS Information technology – Fibre management — Guidance on 14165-147 channel — Part 147: Physical project management 2020-08-27 interfaces - 7 (FC-PI-7) 2020-08-28

(Revision of ISO 21500:2012) ISO/IEC DIS Information technology — Smart TC 269 Railway applications 30145-1 City ICT reference framework — Part 1: Smart city business 2020-09-22 ISO/DIS Railway applications — Polymer- process framework 12856-1 ic composite sleepers bearers and transoms — Part 1: Material 2020-09-02 ISO/IEC DIS Identification cards — ICC-man- characteristics 18328-2 aged devices — Part 2: Physical (Revision of ISO 12856-1:2014) characteristics and test methods 2020-09-15 for cards with devices ISO/DIS Railway applications — Polymer- (Revision of ISO/IEC 12856-3 ic composite sleepers bearers 18328-2:2015) and transoms — Part 3: General 2020-08-28 requirements ISO/IEC DIS Programming languages — C++ 14882 ISO/DIS Railway applications — Rail 2020-09-03 23300-1 Welding — Part 1: General re- quirements and test methods for 2020-09-22 (Revision of ISO/IEC rail welding 14882:2017) TC 296 Bamboo and rattan ISO/IEC DIS Information technology — Digi- ISO/DIS Bamboo charcoal — Part 1: 29121 tally recorded media for informa- 21626-1 Generalities tion interchange and storage 2020-09-11 2020-08-28 — Data migration method for optical disks for long-term data storage ISO/DIS Bamboo charcoal — Part 2: Fuel (Revision of ISO/IEC 21626-2 applications 29121:2018) 2020-08-28 ISO/IEC DIS Information security, cyberse- 15408-3 curity and privacy protection — ISO/DIS Bamboo charcoal — Part 3: Puri- Evaluation criteria for IT security 2020-09-17 21626-3 fication applications — Part 3: Security assurance 2020-08-28 components

(Revision of ISO/IEC ISO/DIS 23066 Vocabulary related to rattan 15408-3:2008) materials and products ISO/IEC DIS Information security — Redac- 2020-09-08 23264-1 tion of authentic data — Part 1:

General 2020-09-22 TC 306 Foundry machinery ISO/DIS Foundry machinery — Termi- ISO/IEC DIS Office equipment — Minimum 23472-3 nology — Part 3: Die casting 11160-2 information to be included in machines and other equipment 2020-09-09 specification sheets — Part 2: 2020-09-21 related to permanent mold cast- Class 3 and Class 4 printers ing process (Revision of ISO/IEC 11160-2:2013) TC 309 Governance of organizations ISO/IEC Information technology — Mul- 23000- timedia application format ISO/DIS 37000 Guidance for the governance of 19:2020/DAmd (MPEG-A) — Part 19: Common 2020-09-23 organizations 1 media application format (CMAF) 2020-09-02 for segmented media — Amend- ment 1: Additional CMAF HEVC ISO/DIS 37002 Whistleblowing management media profiles systems — Guidelines ISO/IEC Information technology — Mul- 2020-08-31 23000- timedia application format 22:2019/DAmd (MPEG-A) — Part 22: Multi- 2020-09-22 TMBG Technical Management 1 image application format (MIAF) Board - groups — Amendment 1: Reference software and conformance for multi image application format

8 ISO Update, Supplement to ISO Focus -- July 2020 ISO/IEC DIS Information technology — Cod- 23090-2 ed representation of immersive media — Part 2: Omnidirectional 2020-09-08 media format (Revision of ISO/IEC 23090-2:2019) ISO/IEC DIS Information technology — FDIS circulated 23090-9 MPEG-I (Coded Representation of Immersive Media) — Part 9: 2020-09-16 Geometry-based Point Cloud Period from 01 June to 01 July 2020 Compression These Final draft International Standards have been submitted to the ISO/IEC DIS Information technology – Gen- ISO member bodies for formal approval by the date shown 23094-2 eral video coding — Part 2: Low complexity enhancement video 2020-09-22 * Available in English only coding ISO/IEC DIS Information technology — Guid- 19075-1 ance for the use of database Vote language SQL — Part 1: XQuery 2020-08-26 terminates regular expressions (Revision of ISO/IEC TR 19075-1:2011) IIW International Institute of Welding ISO/IEC DIS Information technology — Guid- 19075-2 ance for the use of database ISO/PRF 6847 Welding consumables — Depo- language SQL — Part 2: Time- 2020-08-26 sition of a weld metal pad for related information chemical analysis (Revision of ISO/IEC TR (Revision of ISO 6847:2013) 19075-2:2015) TC 2 Fasteners ISO/IEC DIS Information technology — Guid- ISO 898- Mechanical properties of fasten- 19075-3 ance for the use of database 3:2018/Amd 1 ers made of carbon steel and al- language SQL — Part 3: SQL 2020-08-26 loy steel — Part 3: Flat washers embedded in programs using the with specified property classes JavaTM programming language — Amendment 1 (Revision of ISO/IEC TR 19075-3:2015) TC 5 Ferrous metal pipes and ISO/IEC DIS Information technology — Guid- metallic fittings 19075-4 ance for the use of database lan- ISO/FDIS Ductile iron pipelines — Hydro- guage SQL — Part 4: Routines 2020-08-26 10802 static testing after installation and types using the JavaTM 2020-08-04 programming language (Revision of ISO/IEC TR (Revision of ISO 10802:1992) 19075-4:2015) TC 8 Ships and marine ISO/IEC DIS Information technology — Guid- technology 19075-5 ance for the use of database language SQL — Part 5: Row 2020-08-26 ISO/FDIS Ships and marine technology — pattern recognition 21072-3 Marine environment protection: (Revision of ISO/IEC TR performance testing of oil skim- 2020-08-21 19075-5:2016) mers — Part 3: High viscosity oil (Revision of ISO 21072-3:2010) ISO/IEC DIS Information technology — Guid- 19075-6 ance for the use of database ISO/FDIS Ships and marine technology language SQL — Part 6: Support 2020-08-26 21963 — Marine environment protec- for JSON tion — Tanks and piping systems 2020-08-17 (Revision of ISO/IEC TR for facilitating 5 ppm oil-water 19075-6:2017) separation ISO/IEC DIS Information technology — Guid- ISO/FDIS Ships and marine technology 19075-7 ance for the use of database 16273 — Night vision equipment for language SQL — Part 7: Poly- 2020-08-26 high-speed craft — Operational 2020-08-04 morphic table functions and performance requirements, (Revision of ISO/IEC TR methods of testing and required 19075-7:2017) test results (Revision of ISO 16273:2003) ISO/IEC DIS Information technology — Guid- 19075-8 ance for the use of database ISO/PRF Marine technology — Ocean language SQL — Part 8: Multidi- 2020-08-26 21851 observation systems — Design mensional arrays criteria of ocean hydro-mete- (Revision of ISO/IEC TR orological observation systems 19075-8:2019) reuse and interaction ISO/IEC DIS Information technology — Bio- TC 22 Road vehicles 19794-7 metric data interchange formats ISO/PRF Road vehicles — Media Oriented — Part 7: Signature/sign time 2020-09-01 21806-2 Systems Transport (MOST) — series data Part 2: Application layer (Revision of ISO/IEC 19794- ISO/PRF Road vehicles — Media Oriented 7:2014/Amd 1:2015, ISO/IEC 21806-4 Systems Transport (MOST) 9075-14:2016/Cor 1:2019, ISO/ — Part 4: Transport layer and IEC 19794-7:2014) network layer

ISO Update, Supplement to ISO Focus -- July 2020 9 ISO/PRF Road vehicles — Media Oriented ISO/FDIS Lubricants, industrial oils and re- 21806-6 Systems Transport (MOST) — 12925-2 lated products (class L) — Family Part 6: Data link layer C (gears) — Part 2: Specifica- 2020-08-24 tions of categories CKH, CKJ ISO/FDIS 5011 Inlet air cleaning equipment for and CKM (lubricants open and internal combustion engines and semi-enclosed gear systems) compressors — Performance 2020-08-03 testing ISO/FDIS Specification of liquefied (Revision of ISO 5011:2014, ISO 23306 natural gas as a fuel for marine 5011:2014/Amd 1:2018) applications 2020-08-21

ISO/FDIS Road vehicles — Measurement 15007 and analysis of driver visual be- TC 30 Measurement of fluid flow haviour with respect to transport 2020-07-27 in closed conduits information and control systems (Revision of ISO 15007-1:2014, ISO/PRF Measurement of fluid flow by ISO/TS 15007-2:2014) 5167-3 means of pressure differential devices inserted in circular ISO/FDIS Road vehicles — H-point cross-section conduits running 20176 machine (HPM-II) — Specifica- full — Part 3: Nozzles and Ven- tions and procedure for H-point 2020-08-18 turi nozzles determination (Revision of ISO 5167-3:2003) (Revision of ISO 20176:2011) TC 34 Food products ISO/FDIS Road vehicles — Compressed 15500-14 natural gas (CNG) fuel system ISO/TS 23942 Determination of hydroxytyro- components — Part 14: Excess 2020-08-11 sol and tyrosol content in extra flow valve virgin olive oils — Reverse phase (Revision of ISO 15500-14:2012, high performance liquid chroma- ISO 15500-14:2012/Amd 1:2016) tography (RP-HPLC) TC 23 Tractors and machinery for ISO/PRF TS Molecular biomarker analysis 20224-4 — Detection of animal-derived agriculture and forestry materials in foodstuffs and ISO/FDIS Agricultural trailers and trailed feedstuffs by real-time PCR — 12140-1 equipment — Drawbar jacks — Part 4: Chicken DNA detection Part 1: Design safety, test meth- 2020-08-06 method ods and acceptance criteria ISO/PRF TS Molecular biomarker analysis (Revision of ISO 12140:2013) 20224-5 — Detection of animal-derived ISO/FDIS Agricultural trailers and trailed materials in foodstuffs and feed- 12140-2 equipment — Drawbar jacks — stuffs by real-time PCR — Part Part 2: Application safety, test 2020-08-06 5: Goat DNA detection method methods and acceptance criteria ISO/PRF TS Molecular biomarker analysis ISO/PRF Agricultural and forestry tractors 20224-6 — Detection of animal-derived 17567 and implements — Hydraulic materials in foodstuffs and feed- power beyond stuffs by real-time PCR — Part (Revision of ISO 17567:2005) 6: Horse DNA detection method ISO/PRF Permissible mechanical con- ISO/PRF TS Molecular biomarker analysis 22471 nection combinations between 20224-7 — Detection of animal-derived towed and towing agricultural materials in foodstuffs and feed- vehicles stuffs by real-time PCR — Part 7: ISO/FDIS Machinery for forestry — Saw Donkey DNA detection method 21876 chain shot protective windows TC 35 Paints and varnishes — Test method and performance 2020-08-14 ISO/FDIS 2810 Paints and varnishes — Natural criteria weathering of coatings — Expo- TC 24 Particle characterization sure and assessment 2020-07-27 including sieving (Revision of ISO 2810:2004) ISO/FDIS Preparation of particulate refer- 14411-2 ence materials — Part 2: Poly- TC 38 Textiles disperse spherical particles 2020-08-21 ISO/FDIS Textiles and textile products — 22744-2 Determination of organotin com- TC 27 Coal and coke pounds — Part 2: Direct method 2020-07-29 using liquid chromatography ISO/FDIS Solid mineral fuels — Vocabulary 1213-1 — Part 1: Terms relating to coal ISO/PRF Textiles — Tests for colour preparation 2020-08-26 105-X19 fastness — Part X19: Colour fastness to rubbing (Gakushin (Revision of ISO 1213-1:1993) test method) ISO/FDIS 1170 Coal and coke — Calculation of ISO/FDIS Textiles — Determination of analyses to different bases 12945-2 fabric propensity to surface pill- 2020-08-12 ing, fuzzing or matting — Part 2: 2020-08-06 Modified Martindale method (Revision of ISO 1170:2013) (Revision of ISO 12945-2:2000) TC 28 Petroleum and related ISO/FDIS Textiles — Determination of products, fuels and lu- 12945-4 fabric propensity to surface pill- bricants from natural or ing, fuzzing or matting — Part 4: 2020-08-06 Assessment of pilling, fuzzing or synthetic sources matting by visual analysis

10 ISO Update, Supplement to ISO Focus -- July 2020 TC 42 Photography ISO/PRF 4658 Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure ISO/PRF TR Photography — Photographic

20791-1 reflection prints — Part 1: Evalu- (Revision of ISO 4658:1999, ISO ation methods of image quality 4658:1999/Amd 1:2004) TC 43 Acoustics ISO/PRF 4659 Styrene-butadiene rubber (car- ISO/FDIS Acoustics — Recommended bon black or carbon black and 11690-1 practice for the design of low- oil masterbatches) — Evaluation noise workplaces containing ma- 2020-09-16 procedure chinery — Part 1: Noise control (Revision of ISO 4659:2014) strategies TC 46 Information and (Revision of ISO 11690-1:1996) documentation ISO/FDIS Acoustics — Recommended 11690-2 practice for the design of low- ISO/FDIS Information and documentation noise workplaces containing ma- 2020-09-16 3297.2 — International standard serial chinery — Part 2: Noise control number (ISSN) 2020-08-21 measures (Revision of ISO 11690-2:1996) (Revision of ISO 3297:2017) ISO/FDIS Acoustics — Determination of ISO/PRF Information and documentation 9053-2 airflow resistance — Part 2: 23404 — Papers and boards used for Alternating airflow method 2020-08-21 conservation — Measurement of impact of volatiles on cellulose in paper ISO/PRF Acoustics — Laboratory and 10848-5 field measurement of the flanking TC 59 Buildings and civil engi- transmission for airborne, impact neering works and building service equipment ISO/PRF TR Resilience of buildings and civil sound between adjoining rooms 22845 engineering works — Part 5: Radiation efficiencies of building elements ISO/PRF Buildings and civil engineering TC 44 Welding and allied 6707-1 works — Vocabulary — Part 1: processes General terms ISO/FDIS Welding consumables — Test (Revision of ISO 6707-1:2017, 15792-1 methods — Part 1: Preparation ISO 1791:1983, ISO 1803:1997) of all-weld metal test pieces and 2020-07-28 TC 61 Plastics specimens in steel, nickel and ISO/FDIS Plastics — Determination of nickel alloys 20329 abrasive wear by reciprocating (Revision of ISO 15792-1:2000, linear sliding motion 2020-08-17 ISO 15792-1:2000/Amd 1:2011)

ISO/FDIS Welding consumables — Test ISO/FDIS Fibre-reinforced plastics — 15792-2 methods — Part 2: Preparation 10352 Moulding compounds and of single-run and two-run tech- 2020-07-28 prepregs — Determination of 2020-07-27 nique test pieces and specimens mass per unit area and fibre in steel mass per unit area (Revision of ISO 15792-2:2000) (Revision of ISO 10352:2010) ISO/FDIS 9453 Soft solder alloys — Chemical ISO/FDIS Plastics — Carbon and envi- compositions and forms 22526-3 ronmental footprint of biobased 2020-08-19 plastics — Part 3: Process car- 2020-07-29

bon footprint, requirements and (Revision of ISO 9453:2014) guidelines for quantification ISO/FDIS Soft soldering fluxes — Test 9455-5 methods — Part 5: Copper mir- TC 67 Materials, equipment and ror test 2020-09-11 offshore structures for pe- troleum, petrochemical and (Revision of ISO 9455-5:2014) natural gas industries ISO/FDIS Brazing — Fluxes for brazing ISO/FDIS Petroleum and natural gas 18496 — Classification and technical 15156-1 industries — Materials for use in delivery conditions 2020-08-15 H2S-containing environments in 2020-09-11 oil and gas production — Part 1: General principles for selection TC 45 Rubber and rubber of cracking-resistant materials products (Revision of ISO 15156-1:2015) ISO/PRF Rubber and plastics hoses and ISO/FDIS Petroleum and natural gas 8066-3 hose assemblies for automotive 15156-2 industries — Materials for use in air conditioning — Specification H2S-containing environments in 2020-09-11 — Part 3: Refrigerant 1234yf oil and gas production — Part 2: ISO/FDIS 2302 Isobutene-isoprene rubber (IIR) Cracking-resistant carbon and — Evaluation procedure low-alloy steels, and the use of 2020-08-19 cast irons (Revision of ISO 15156-2:2015) (Revision of ISO 2302:2014) ISO/PRF 4097 Rubber, ethylene-propylene- diene (EPDM) — Evaluation procedure (Revision of ISO 4097:2014)

ISO Update, Supplement to ISO Focus -- July 2020 11 ISO/FDIS Petroleum and natural gas TC 92 Fire safety 15156-3 industries — Materials for use in ISO/PRF TS Fire safety — Statistical data col- H2S-containing environments in 2020-09-11 17755-2 lection — Part 2: Vocabulary oil and gas production — Part

3: Cracking-resistant CRAs (corrosion-resistant alloys) and TC 94 Personal safety -- Personal other alloys protective equipment (Revision of ISO 15156-3:2015) ISO/FDIS Eye and face protection against TC 68 Financial services 12609-1 intense light sources used on hu- ISO/FDIS Financial services — Internation- mans and animals for cosmetic 2020-08-17 13616-1 al bank account number (IBAN) and medical applications — Part — Part 1: Structure of the IBAN 2020-08-19 1: Specification for products (Revision of ISO 12609-1:2013) (Revision of ISO 13616-1:2007) ISO/FDIS Wildland firefighting personal ISO/FDIS Financial services — Internation- 16073-9 protective equipment — Re- 13616-2 al bank account number (IBAN) quirements and test methods — 2020-07-29 — Part 2: Role and responsibili- 2020-08-19 Part 9: Firehoods ties of the Registration Authority TC 102 Iron ore and direct reduced (Revision of ISO 13616-2:2007) iron ISO/PRF Financial services — Legal ISO 3087 Iron ores — Determination of the 17442-1 entity identifier (LEI) — Part 1: moisture content of a lot Assignment (Revision of ISO 17442:2019) (Revision of ISO 3087:2011) ISO/PRF Financial services — Legal entity TC 105 Steel wire ropes 17442-2 identifier (LEI) — Part 2: Applica- tion in digital certificates ISO/FDIS 8794 Steel wire ropes — Spliced eye (Revision of ISO 17442:2019) terminations for slings 2020-07-31 ISO/PRF Financial services — Unique 23897 transaction identifier (UTI) (Revision of ISO 8794:1986)

TC 106 Dentistry TC 71 Concrete, reinforced concrete and pre-stressed ISO/FDIS Dentistry — Corrosion test meth- 10271 ods for metallic materials concrete 2020-07-27 ISO/PRF Simplified design of connec- 22502 tions of concrete claddings to (Revision of ISO 10271:2011) concrete structures ISO/FDIS Dentistry — Fluoride varnishes TC 79 Light metals and their 17730 alloys 2020-08-19

ISO/FDIS Anodizing of aluminium and (Revision of ISO 17730:2014) 23052 its alloys — Test method for chemical resistance of anodic 2020-08-14 TC 108 Mechanical vibration, oxidation coatings on aluminium shock and condition and its alloys using electromotive monitoring force apparatus ISO/FDIS Condition monitoring and diag- TC 82 Mining 16079-2 nostics of wind turbines — Part ISO/FDIS Mine closure and reclamation 2: Monitoring the drivetrain 2020-08-14 20305 — Vocabulary 2020-08-13 TC 123 Plain bearings

ISO/FDIS Plain bearings — Thin-walled TC 83 Sports and other rec- 3548-2 half bearings with or without reational facilities and flange — Part 2: Measurement 2020-07-29 equipment of wall thickness and flange thickness ISO 7331 Ski-poles for alpine and touring (Revision of ISO 3548-2:2009) skiing — Requirements and test methods TC 126 Tobacco and tobacco (Revision of ISO 7331:2011) products TC 85 Nuclear energy, nuclear ISO/FDIS Cigarettes — Determination of technologies, and radio- 23921 tobacco specific nitrosamines in logical protection mainstream cigarette smoke with 2020-08-20 an intense smoking regime — ISO/FDIS 8690 Measurement of radioactivity — Method using LC-MS/MS Gamma ray and beta emitting radionuclides — Test method to 2020-08-12 ISO/FDIS Cigarettes — Determination of assess the ease of decontamina- 23922 selected carbonyls in the main- tion of surface materials stream smoke of cigarettes with 2020-08-21 (Revision of ISO 8690:1988) an intense smoking regime — Method using high performance ISO/FDIS Determination of the character- liquid chromatography 11929-4 istic limits (decision threshold, detection limit and limits of the 2020-08-17 coverage interval) for measure- ments of ionizing radiation — Part 4: Guidelines to applications

12 ISO Update, Supplement to ISO Focus -- July 2020 ISO/FDIS Cigarettes — Determination ISO/FDIS Cardiovascular implants — Car- 23923 of selected volatile organic 5840-2 diac valve prostheses — Part 2: compounds in the mainstream 2020-08-20 Surgically implanted heart valve 2020-08-20 smoke of cigarettes with an in- substitutes tense smoking regime — Method (Revision of ISO 5840-2:2015) using GC/MS ISO/FDIS Cardiovascular implants — Car- TC 127 Earth-moving machinery 5840-3 diac valve prostheses — Part 3: Heart valve substitutes implant- 2020-08-21 ISO/FDIS Earth-moving machinery — ed by transcatheter techniques 24410 Coupling of attachments to skid (Revision of ISO 5840-3:2013) steer loaders 2020-07-28 ISO/PRF TS General requirements of tissue (Revision of ISO 24410:2005) 21560 engineered medical products

TC 130 Graphic technology TC 159 Ergonomics ISO/FDIS Graphic technology — Visual 23498 opacity of printed white ink ISO/PRF TR Ergonomics of human-system in- 2020-08-20 9241-514 teraction — Part 514: Guidance for the application of anthropo- metric data in the ISO 9241-500 TC 135 Non-destructive testing series ISO/FDIS Non-destructive testing — Char- TC 172 Optics and photonics 22232-2 acterization and verification of ultrasonic test equipment — Part 2020-08-20 ISO/FDIS Endoscopes — Medical endo- 2: Probes 8600-6 scopes and endotherapy devices — Part 6: Vocabulary 2020-08-21 TC 138 Plastics pipes, fittings and valves for the transport of (Revision of ISO 8600-6:2005) fluids ISO/FDIS Microscopes — Vocabulary for ISO/FDIS Plastics piping systems for 10934 light microscopy 16486-2 the supply of gaseous fuels — 2020-07-27 Unplasticized polyamide (PA-U) 2020-08-03 piping systems with fusion jointing and mechanical jointing ISO/FDIS Ophthalmic implants — In- — Part 2: Pipes 11979-5 traocular lenses — Part 5: (Revision of ISO 16486-2:2012, Biocompatibility 2020-08-21 ISO 16486-2:2012/Amd 1:2014) (Revision of ISO 11979-5:2006) ISO/FDIS Plastics piping systems for 16486-3 the supply of gaseous fuels — TC 173 Assistive products Unplasticized polyamide (PA-U) 2020-08-20 ISO/FDIS Accessible design — Considera- piping systems with fusion 17069 tion and assistive products for jointing and mechanical jointing accessible meeting 2020-08-21 — Part 3: Fittings (Revision of ISO 16486-3:2012, (Revision of ISO 17069:2014) ISO 16486-3:2012/Amd 1:2014) TC 174 Jewellery and precious TC 145 Graphical symbols metals ISO/TS 20559 Graphical symbols — Safety col- ISO/PRF Jewellery and precious metals — ours and safety signs — Guid- 24016 Grading polished diamonds — ance for the development and Terminology, classification and use of a safety signing system test methods ISO/FDIS Safety information for the con- TC 182 Geotechnics 20560-1 tent of piping systems and tanks — Part 1: Piping systems 2020-07-28 ISO/FDIS Geotechnical investigation and 22476-9 testing — Field testing — Part 9: Field vane test (FVT and FVT-F) 2020-08-14 TC 146 Air quality ISO/FDIS Workplace air — Gases and va- TC 183 Copper, lead, zinc 22065 pours — Requirements for evalu- and nickel ores and ation of measuring procedures 2020-09-16 using pumped samplers concentrates (Revision of ISO 22065:2019) ISO/FDIS Copper and nickel sulfide ores 15661 and concentrates — Determina- TC 147 Water quality tion of total chlorine content — 2020-08-17 ISO/FDIS Water quality — Determination Alkaline fusion and potentiomet- 22066 of total cyanide — Method using ric titration method segmented flow injection, in-line 2020-08-21 ultraviolet digestion analysis by TC 190 Soil quality gas diffusion and amperometric ISO/FDIS Soil quality — Direct extraction detection 11063 of soil DNA 2020-08-17 TC 150 Implants for surgery

ISO/FDIS Cardiovascular implants — Car- (Revision of ISO 11063:2012) 5840-1 diac valve prostheses — Part 1: General requirements 2020-08-21 TC 194 Biological and clinical eval- uation of medical devices (Revision of ISO 5840-1:2015)

ISO Update, Supplement to ISO Focus -- July 2020 13 ISO/FDIS Biological evaluation of medical ISO/PRF Health informatics — Public 10993-12 devices — Part 12: Sample prep- 17090-4 key infrastructure — Part 4: aration and reference materials 2020-08-14 Digital signatures for healthcare documents (Revision of ISO 10993-12:2012) (Revision of ISO 17090-4:2014) TC 204 Intelligent transport TC 216 Footwear systems ISO/FDIS Footwear — Attachment ISO/PRF Intelligent transport systems 24263 strength of straps, trims and 17515-2 — Evolved universal terrestrial accessories 2020-07-29 radio access network (E-UTRAN) — Part 2: Device to device com- ISO/FDIS Footwear — Test methods for munications (D2D) 24264 hollow and compact heels and ISO/PRF Intelligent transport systems — top pieces — Top piece attach- 2020-08-05 20524-2 Geographic Data Files (GDF) ment strength GDF5.1 — Part 2: Map data ISO/FDIS Footwear — Test methods for used in automated driving 24265 uppers — Resistance to rubbing systems, Cooperative ITS, and using a rubber strip 2020-08-13 multi-modal transport (Revision of ISO 14825:2011) ISO/FDIS Footwear — Test methods for ISO/PRF TR Cooperative intelligent transport 24266 whole shoe — Flexing durability 21186-1 systems (C-ITS) — Guidelines on 2020-08-19 the usage of standards — Part 1: Standardization landscape and releases TC 228 Tourism and related services ISO/PRF TR Cooperative intelligent transport 21186-2 systems (C-ITS) — Guidelines on ISO 21102 Adventure tourism — Leaders — the usage of standards — Part 2: Personnel competence Hybrid communications (Revision of ISO/TR 21102:2013) ISO/TR Intelligent transport systems 21724-1 — Common Transport Service TC 229 Nanotechnologies Account Systems — Part 1: ISO/PRF TS Nanotechnologies — Vocabulary Framework and use cases 80004-3 — Part 3: Carbon nano-objects ISO/PRF Intelligent transport systems 22738 — Localized communications — (Revision of ISO/TS Optical camera communication 80004-3:2010) TC 206 Fine ceramics ISO/PRF TS Nanotechnologies — Vocabulary 80004-8 — Part 8: Nanomanufacturing ISO/PRF Fine ceramics (advanced ceram- processes 22278 ics, advanced technical ceram- (Revision of ISO/TS ics) — Test method for crystalline 80004-8:2013) quality of single-crystal thin film (wafer) using XRD method with TC 249 Traditional Chinese parallel X-ray beam medicine TC 207 Environmental ISO/FDIS Traditional Chinese medicine — management 22590 Determination of sulfur dioxide in natural products by titration 2020-07-27 ISO Environmental management —

14040:2006/ Life cycle assessment — Princi- FDAmd 1 ples and framework — Amend- 2020-08-20 TC 264 Fireworks ment 1 ISO/FDIS Firework displays — General ISO Environmental management 21583 guidance 14044:2006/ — Life cycle assessment — 2020-08-24 FDAmd 2 Requirements and guidelines — 2020-08-20 Amendment 2 TC 268 Sustainable cities and TC 211 Geographic information/ communities Geomatics ISO/FDIS Smart community infrastructures ISO/FDIS Geographic information — Geo- 37165 — Guidance on smart transpor- 19168-1 spatial API for features — Part tation with the use of digitally 2020-08-17 1: Core 2020-08-13 processed payment (d-payment)

ISO/PRF TR Report of pilot testing on the ap- TC 213 Dimensional and geometri- 37171 plication of ISO smart commu- cal product specifications nity infrastructures standards and verification TC 269 Railway applications ISO/TR 23276 Geometrical product specifica- ISO/FDIS Railway applications — Polymer- tions (GPS) — Surface texture: 12856-2 ic composite sleepers, bearers Profile method — Flowchart for and transoms — Part 2: Product 2020-08-03 PSm, RSm, WSm and Pc, Rc, testing Wc ISO/FDIS Railway infrastructure — Rail TC 215 Health informatics 22074-1 fastening systems — Part 1: Vocabulary 2020-07-27

14 ISO Update, Supplement to ISO Focus -- July 2020 (Revision of ISO/IEC 14496- TC 275 Sludge recovery, recycling, 12:2015/Amd 2:2018, ISO/IEC treatment and disposal 14496-12:2015/Amd 1:2017, ISO/FDIS Sludge recovery, recycling, ISO/IEC 14496-12:2015) 19698 treatment and disposal — Ben- ISO/IEC FDIS Information technology — Media eficial use of biosolids — Land 2020-07-27 23005-1 context and control — Part 1: application Architecture 2020-08-12 TC 281 Fine bubble technology (Revision of ISO/IEC ISO/TR 23015 Fine bubble technology — 23005-1:2016) Measurement technique matrix for the characterization of fine ISO/IEC FDIS Information technology — Dy- bubbles 23009-2 namic adaptive streaming over HTTP (DASH) — Part 2: Con- 2020-08-06 TC 301 Energy management and formance and reference software energy savings (Revision of ISO/IEC ISO/FDIS Calculation methods for energy 23009-2:2017) 50049 efficiency and energy consump- ISO/IEC FDIS Information technology — Key- tion variations at country, region 2020-08-11 9995-12 board layouts for text and office and city levels systems — Part 12: Keyboard 2020-08-07 TC 304 Healthcare organization group selection management ISO/IEC FDIS Information technology — User ISO 22886 Healthcare organization manage- 23836 interfaces — Universal interface ment — Vocabulary for human language selection 2020-08-07

TC 306 Foundry machinery ISO/IEC FDIS Information technology — Com- 19785-1 mon Biometric Exchange For- ISO 23472-1 Foundry machinery — Vocabu- mats Framework — Part 1: Data 2020-08-12 lary — Part 1: General element specification (Revision of ISO/IEC JTC 1 Information technology 19785-1:2015) ISO/IEC PRF Information technology — Smart ISO/IEC FDIS Information technology — 30145-3 City ICT reference framework — 19785-2 Common Biometric Exchange Part 3: Smart city engineering Formats Framework — Part 2: 2020-08-12 framework Biometric registration authority (Revision of ISO/IEC 19785- ISO/IEC FDIS Identification cards — Inte- 2:2006, ISO/IEC 19785-2:2006/ 7816-6 grated circuit cards — Part 6: Amd 1:2010) Interindustry data elements for 2020-08-04 interchange ISO/IEC FDIS Information technology — (Revision of ISO/IEC 19785-3 Common Biometric Exchange 7816-6:2016) Formats Framework — Part 3: 2020-08-12 Patron format specifications ISO/IEC Cards and security devices for (Revision of ISO/IEC 14443-3:2018/ personal identification — Con- 19785-3:2015) PRF Amd 2 tactless proximity objects — Part 3: Initialization and anticollision ISO/IEC FDIS Information technology — Data — Amendment 2: Enhancements 21836 centres — Server energy effec- for harmonization tiveness metric 2020-07-31

ISO/IEC Cards and security devices for 14443-4:2018/ personal identification — Con- ISO/IEC Information technology — Ser- Amd 2 tactless proximity objects — Part 20000-2:2019/ vice management — Part 2: 4: Transmission protocol — PRF Amd 1 Guidance on the application of Amendment 2: Enhancements service management systems — for harmonization Amendment 1 ISO/IEC FDIS Information technology — Non- ISO/IEC PRF Information technology — Big 13888-1 repudiation — Part 1: General TR 20547-1 data reference architecture — 2020-08-05 Part 1: Framework and applica- tion process (Revision of ISO/IEC 13888-1:2009) ISO/IEC FDIS Information technology — 13888-3 Non-repudiation — Part 3: Mechanisms using asymmetric 2020-08-05 techniques (Revision of ISO/IEC 13888-3:2009) ISO/IEC Information technology — Se- Standards published 18033-4:2011/ curity techniques — Encryption PRF Amd 1 algorithms — Part 4: Stream ciphers — Amendment 1: ZUC New International Standards published between 01 June and 01 July ISO/IEC FDIS Information technology — Cod- 2020 14496-12 ing of audio-visual objects — Part 12: ISO base media file 2020-08-14 1 delayed publication of language version format 2 corrected version 3 multilingual document

ISO Update, Supplement to ISO Focus -- July 2020 15 ISO 10893- fr Non-destructive testing of steel tubes 1:2011/Amd — Part 1: Automated electromag- Price 1:2020 netic testing of seamless and welded XZ group (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness — Amend- IIW International Institute of ment 1: Change of dimensions of the Welding reference notch; change acceptance ISO en Friction stir welding — Aluminium — criteria 25239-1:2020 fr Part 1: Vocabulary ISO 10893- fr Non-destructive testing of steel tubes A 2:2011/Amd — Part 2: Automated eddy current 1:2020 testing of seamless and welded XZ ISO en Friction stir welding — Aluminium — (except submerged arc-welded) steel 25239-2:2020 fr Part 2: Design of weld joints tubes for the detection of imperfec- A tions — Amendment 1: Change of dimensions of the reference notch; change acceptance criteria ISO en Friction stir welding — Aluminium 25239-3:2020 fr — Part 3: Qualification of welding ISO 10893- fr Non-destructive testing of steel tubes operators C 3:2011/Amd — Part 3: Automated full peripheral 2:2020 flux leakage testing of seamless and XZ welded (except submerged arc- ISO en Friction stir welding — Aluminium — welded) ferromagnetic steel tubes for 25239-4:2020 fr Part 4: Specification and qualification the detection of longitudinal and/or of welding procedures D transverse imperfections — Amend-

ment 2: Change acceptance criteria ISO en Friction stir welding — Aluminium ISO 10893- fr Non-destructive testing of steel 25239-5:2020 fr — Part 5: Quality and inspection 8:2011/Amd tubes — Part 8: Automated ultrasonic requirements B 1:2020 testing of seamless and welded steel XZ

tubes for the detection of laminar TC 5 Ferrous metal pipes and metal- imperfections — Amendment 1: lic fittings Change acceptance criteria ISO 8180:2020 en Ductile iron pipelines — Polyethylene ISO 10893- fr Non-destructive testing of steel sleeving for site application 9:2011/Amd tubes — Part 9: Automated ultrasonic C 1:2020 testing for the detection of laminar XZ imperfections in strip/plate used for the manufacture of welded steel TC 6 Paper, board and pulps tubes — Amendment 1: Change ac- ISO fr Paper, board and pulps — Determi- ceptance criteria 6588-1:2020 nation of pH of aqueous extracts — ISO 10893- en Non-destructive testing of steel tubes Part 1: Cold extraction B 10:2011/Amd fr — Part 10: Automated full peripheral 1:2020 ultrasonic testing of seamless and XZ ISO en Corrugated fibreboard — Determina- welded (except submerged arc-weld- 13821:2020 tion of edgewise crush resistance — ed) steel tubes for the detection of Waxed edge method A longitudinal and/or transverse imper- fections — Amendment 1: Change of ultrasonic test frequency; change of TC 8 Ships and marine technology acceptance criteria ISO en Ships and marine technology — ISO 10893- en Non-destructive testing of steel tubes 21195:2020 Systems for the detection of persons 11:2011/Amd fr — Part 11: Automated ultrasonic while going overboard from ships C 1:2020 testing of the weld seam of welded XZ (man overboard detection) steel tubes for the detection of longi- ISO en Ships and marine technology — Ma- tudinal and/or transverse imperfec- 21072-2:2020 rine environment protection: perfor- tions — Amendment 1: Change of mance testing of oil skimmers — Part B ultrasonic test frequency; change of 2: Light and medium viscosity oil acceptance criteria ISO en Ships and marine technology — Lab- ISO 10893- fr Non-destructive testing of steel tubes 22987:2020 oratory test method for skin friction of 12:2011/Amd — Part 12: Automated full peripheral antifouling paints by rotating drum B 1:2020 ultrasonic thickness testing of seam- XZ less and welded (except submerged TC 10 Technical product arc-welded) steel tubes — Amend- ment 1: Change of acceptance documentation criteria ISO en Technical product documentation TC 20 Aircraft and space vehicles 128-3:2020 fr (TPD) — General principles of repre- sentation — Part 3: Views, sections F ISO 2026:2020 en Aircraft — Connections for starting and cuts engines by air A TC 17 Steel ISO 4947:2020 en Steel and cast iron — Determination ISO en Air cargo unit load devices — Per- fr of vanadium content — Potentiomet- 21100:2020 formance requirements and test ric titration method B parameters F

TC 22 Road vehicles

16 ISO Update, Supplement to ISO Focus -- July 2020 ISO fr Road vehicles — Vehicle-to-Grid ISO/TS en Horizontal methods for molecular 15118-2:2014 Communication Interface — Part 2: 21569-3:2020 biomarker analysis — Methods of Network and application protocol H analysis for the detection of geneti- C requirements cally modified organisms and derived products — Part 3: Construct- ISO en Road vehicles — In-vehicle Ethernet specific real-time PCR method for 21111-3:2020 — Part 3: Optical 1-Gbit/s physical detection of P35S-pat-sequence for entity requirements and conformance H screening for genetically modified test plan organisms ISO en Road vehicles — In-vehicle Ethernet 21111-5:2020 — Part 5: Optical 1-Gbit/s physical TC 35 Paints and varnishes layer system requirements and test G ISO en Paints and varnishes — De- plans 11890-2:2020 fr termination of volatile organic ISO/TS en Road vehicles — Test contaminants compounds(VOC) and/or semi F 12103-3:2020 for filter evaluation — Part 3: Soot volatile organic compounds (SVOC) contaminant C content — Part 2: Gas-chromato- graphic method ISO en Gasoline engines with direct injection ISO 1524:2020 en Paints, varnishes and printing inks — 19724:2020 — Cleanliness assessment of fuel fr Determination of fineness of grind injection equipment B A

ISO en Electrically propelled mopeds and ISO fr Paints, varnishes and raw materials 18243:2017/ fr motorcycles — Test specifications 15528:2020 for paints and varnishes — Sampling Amd 1:2020 and safety requirements for lithium- XZ C ion battery systems — Amendment 1 TC 23 Tractors and machinery for ISO en Paints and varnishes — Electro- 22553-8:2020 deposition coatings — Part 8: Electric agriculture and forestry charge density B ISO 6533:2020 en Forestry machinery — Portable chain-saw front hand-guard — Di- TC 38 Textiles mensions and clearances B ISO en Textiles — Quantitative chemical 1833-1:2020 fr analysis — Part 1: General principles TC 25 Cast irons and pig irons of testing C ISO en Founding — Ausferritic spheroidal 17804:2020 graphite cast irons — Classification ISO en Textiles — Quantitative chemical E 1833-2:2020 fr analysis — Part 2: Ternary fibre

mixtures C TC 27 Coal and coke ISO en Brown coals and lignites — Deter- ISO en Textiles — Quantitative chemical 20360:2020 mination of the volatile matter in the 1833-25:2020 analysis — Part 25: Mixtures of analysis sample: one furnace method B polyester with certain other fibres A (method using trichloroacetic acid and chloroform) TC 28 Petroleum and related prod- ucts, fuels and lubricants from ISO en Textiles — Qualitative and quantita- natural or synthetic sources 20418-3:2020 fr tive proteomic analysis of some animal hair fibres — Part 3: Peptide D ISO fr Liquefied petroleum gases — As- detection using LC-MS without pro- 13758:1996/ sessment of the dryness of propane tein reduction Amd 1:2020 — Valve freeze method — Amend- XZ ment 1 ISO en Textiles — Tests for colour fastness 105-B06:2020 fr — Part B06: Colour fastness and ISO/TR en Petroleum products and other liquids ageing to artificial light at high tem- C 29662:2020 — Guidance for flash point and peratures: Xenon arc fading lamp test combustibility testing C ISO fr Textiles — Determination of the elas- 20932-1:2018 ticity of fabrics — Part 1: Strip tests ISO 2715:2017 fr Liquid hydrocarbons — Volumetric C measurement by turbine flowmeter F ISO fr Textiles — Determination of the elas- 20932-2:2018 ticity of fabrics — Part 2: Multiaxial TC 34 Food products tests C ISO en Priests (caper) (Capparis spp.) — 20982:2020 Specification and test methods ISO fr Textiles — Determination of the A 20932-3:2018 elasticity of fabrics — Part 3: Narrow fabrics C ISO en Cornelian cherry — Specification and 20984:2020 test methods TC 41 Pulleys and belts (including A veebelts)

ISO 2790:2020 en Belt drives — V-belts for the automo- tive industry and corresponding pulleys — Dimensions B

ISO Update, Supplement to ISO Focus -- July 2020 17 ISO 9981:2020 en Belt drives — Pulleys and V-ribbed ISO en Organization and digitization of belts for the automotive industry — 19650-5:2020 fr information about buildings and civil PK profile: Dimensions B engineering works, including building E information modelling (BIM) — Infor- mation management using building TC 42 Photography information modelling — Part 5: ISO en Photography — Digital still cam- Security-minded approach to infor- 12232:2019/ eras — Determination of exposure mation management Amd 1:2020 index, ISO speed ratings, standard XZ ISO en Sustainability in buildings and civil output sensitivity, and recommended 21678:2020 fr engineering works — Indicators and exposure index — Amendment 1: benchmarks — Principles, require- C Determination of encoding-relative ments and guidelines sensitivity (ERS) ISO en Photography — Digital cameras — TC 61 Plastics 19093:2018/ Measuring low-light performance ISO en Plastics — Injection moulding of test Amd 1:2020 — Amendment 1: Chroma decrease XZ 294-3:2020 fr specimens of thermoplastic materials calculation — Part 3: Small plates B

TC 43 Acoustics ISO en Plastics — Determination of the vis- ISO en Acoustics — Measurement of inser- 1628-2:2020 fr cosity of polymers in dilute solution 11691:2020 fr tion loss of ducted silencers without using capillary viscometers — Part 2: C flow — Laboratory survey method B Poly(vinyl chloride) resins

ISO en Carbon fibre — Determination of ISO en Acoustics — Determination and ap- 10119:2020 density 12999-2:2020 fr plication of measurement uncertain- C ties in building acoustics — Part 2: B

Sound absorption ISO en Plastics — Determination of aerobic ISO en Acoustics — Measurement of speech 19679:2020 fr biodegradation of non-floating plastic 23351-1:2020 fr level reduction of furniture ensembles materials in a seawater/sediment B and enclosures — Part 1: Laboratory C interface — Method by analysis of method evolved carbon dioxide TC 44 Welding and allied processes TC 67 Materials, equipment and off- ISO/TR en Welding — Grouping systems for shore structures for petroleum, 20174:2020 fr materials — Japanese materials petrochemical and natural gas D industries

ISO 3183:2019 fr Petroleum and natural gas industries TC 45 Rubber and rubber products — Steel pipe for pipeline transporta- ISO 1436:2020 en Rubber hoses and hose assemblies tion systems D — Wire-braid-reinforced hydraulic types for oil-based or water-based C TC 69 Applications of statistical fluids — Specification methods ISO 4079:2020 en Rubber hoses and hose assemblies ISO en Control charts — Part 9: Control — Textile-reinforced hydraulic types 7870-9:2020 charts for stationary processes for oil-based or water-based fluids C D — Specification

ISO 6805:2020 en Rubber hoses and hose assemblies ISO/TR en Guidelines for implementation of for underground mining — Wire-rein- 11462-3:2020 statistical process control (SPC) — forced hydraulic types for coal mining A Part 3: Reference data sets for SPC H — Specification software validation ISO 8031:2020 en Rubber and plastics hoses and hose ISO en Sampling procedures for inspection fr assemblies — Determination of elec- 2859-4:2020 fr by attributes — Part 4: Procedures trical resistance and conductivity C for assessment of declared quality C

levels TC 46 Information and documentation TC 70 Internal combustion engines ISO/TR en Information and documentation — ISO en Reciprocating internal combus- 22038:2020 Description and presentation of rights 8178-1:2020 fr tion engines — Exhaust emission information B measurement — Part 1: Test-bed H

measurement systems of gaseous TC 58 Gas cylinders and particulate emissions ISO en Gas cylinders — Refillable seamless ISO en Reciprocating internal combus- 16148:2016/ fr steel gas cylinders and tubes — 8178-4:2020 fr tion engines — Exhaust emission Amd 1:2020 Acoustic emission examination (AT) XZ measurement — Part 4: Steady-state H and follow-up ultrasonic examina- and transient test cycles for different tion (UT) for periodic inspection and engine applications testing — Amendment 1 TC 82 Mining ISO en Mining — Vocabulary — Part 1: Plan- TC 59 Buildings and civil engineering 22932-1:2020 ning and surveying works A ISO en Buildings and civil engineering works 23658:2020 fr — Sealants — Testing of adhesion properties using a bead peel test B

18 ISO Update, Supplement to ISO Focus -- July 2020 ISO en Mining — Vocabulary — Part 2: ISO 5149- en Refrigerating systems and heat 22932-2:2020 Geology 2:2014/Amd fr pumps — Safety and environmen- A 1:2020 tal requirements — Part 2: Design, XZ construction, testing, marking and documentation — Amendment 1 TC 85 Nuclear energy, nuclear technologies, and radiological TC 92 Fire safety protection ISO 1182:2020 en Reaction to fire tests for products — ISO ru Quality management systems fr Non-combustibility test 19443:2018 — Specific requirements for the E application of ISO 9001:2015 by F organizations in the supply chain of TC 94 Personal safety -- Personal the nuclear energy sector supplying protective equipment products and services important to nuclear safety (ITNS) ISO/TS fr Respiratory protective devices — 16976-5:2020 Human factors — Part 5: Thermal ISO/ASTM en Practice for dosimetry in an electron effects C 51818:2020 beam facility for radiation processing at energies between 80 and 300 keV C TC 106 Dentistry ISO 8769:2020 en Measurement of radioactivity — ISO en Dentistry — Corrosion resistance of fr Alpha-, beta- and photon emitting 23325:2020 fr dental amalgam radionuclides — Reference measure- C C ment standard specifications for the calibration of surface contamination ISO en Dentistry — Multifunction handpieces monitors 22569:2020 fr ISO fr Determination of the characteristic C 11929-1:2019 limits (decision threshold, detec- tion limit and limits of the cover- F ISO en Dentistry — Central compressed air age interval) for measurements of 22052:2020 fr source equipment ionizing radiation — Fundamentals D and application — Part 1: Elementary applications TC 107 Metallic and other inorganic ISO fr Determination of the characteristic coatings 11929-2:2019 limits (decision threshold, detec- tion limit and limits of the cover- F ISO en Metallic and other inorganic coat- age interval) for measurements of 22462:2020 ings — Test method for the friction ionizing radiation — Fundamentals coefficient measurement of chemical B and application — Part 2: Advanced conversion coatings applications TC 108 Mechanical vibration, shock ISO fr Determination of the characteristic and condition monitoring 11929-3:2019 limits (decision threshold, detec- ISO en Condition monitoring and diagnostics tion limit and limits of the coverage F 13373-5:2020 fr of machines — Vibration condition interval) for measurements of ionizing monitoring — Part 5: Diagnostic D radiation — Fundamentals and ap- techniques for fans and blowers plication — Part 3: Applications to unfolding methods ISO en Mechanical vibration — Measure- 20816-9:2020 ment and evaluation of machine ISO en Guidelines for in-service inspections vibration — Part 9: Gear units D 20890-1:2020 for primary coolant circuit compo-

nents of light water reactors — Part E 1: Mechanized ultrasonic testing TC 110 Industrial trucks ISO en Guidelines for in-service inspections ISO Industrial trucks — Vocabulary — 20890-2:2020 for primary coolant circuit compo- 5053-1:2020 Part 1: Types of industrial trucks nents of light water reactors — Part C A 2: Magnetic particle and penetrant testing TC 112 Vacuum technology ISO en Guidelines for in-service inspections ISO en Vacuum technology — Standard 20890-3:2020 for primary coolant circuit compo- 21360-1:2020 methods for measuring vacuum- nents of light water reactors — Part B pump performance — Part 1: General E 3: Hydrostatic testing description ISO en Guidelines for in-service inspections ISO en Vacuum technology — Standard 20890-4:2020 for primary coolant circuit compo- 21360-2:2020 methods for measuring vacuum- nents of light water reactors — Part C pump performance — Part 2: Positive C 4: Visual testing displacement vacuum pumps ISO en Guidelines for in-service inspections 20890-5:2020 for primary coolant circuit compo- TC 113 Hydrometry nents of light water reactors — Part D ISO 4360:2020 en Hydrometry — Open channel flow 5: Eddy current testing of steam measurement using triangular profile generator heating tubes weirs E TC 86 Refrigeration and air-conditioning TC 123 Plain bearings ISO en Plain bearings — Pedestal plain bear- 11687-1:2020 ings — Part 1: Pillow blocks C

ISO Update, Supplement to ISO Focus -- July 2020 19 ISO en Plain bearings — Pedestal plain bear- ISO 6358- en Pneumatic fluid power — Determi- 11687-2:2020 ings — Part 2: Side flange bearings 1:2013/Amd fr nation of flow-rate characteristics B 1:2020 of components using compressible XZ fluids — Part 1: General rules and test methods for steady-state flow — ISO 2795:2020 en Plain bearings — Sintered bushes — Amendment 1: Effective conductance Dimensions and tolerances B TC 135 Non-destructive testing

ISO en Non-destructive testing — Gamma ISO en Hydrodynamic plain journal bearings 23159:2020 ray scanning method on process 7902-1:2020 under steady-state conditions — columns E Circular cylindrical bearings — Part 1: E Calculation procedure TC 145 Graphical symbols ISO en Hydrodynamic plain journal bearings ISO 7010:2019 en Graphical symbols — Safety colours 7902-2:2020 under steady-state conditions — fr and safety signs — Registered safety Circular cylindrical bearings — Part G signs H 2: Functions used in the calculation

procedure ISO en Hydrodynamic plain journal bearings TC 146 Air quality 7902-3:2020 under steady-state conditions — ISO en Workplace air — Determination of Circular cylindrical bearings — Part 3: B 15202-1:2020 fr metals and metalloids in airborne Permissible operational parameters particulate matter by inductively C ISO/TS en Plain bearings — Hydrodynamic plain coupled plasma atomic emission 31657-1:2020 journal bearings under steady-state spectrometry — Part 1: Sampling conditions — Part 1: Calculation of F TC 150 Implants for surgery multi-lobed and tilting pad journal ISO 7207- en Implants for surgery — Components bearings 2:2011/Amd fr for partial and total knee joint pros- ISO/TS en Plain bearings — Hydrodynamic plain 2:2020 theses — Part 2: Articulating surfaces XZ 31657-2:2020 journal bearings under steady-state made of metal, ceramic and plastics conditions — Part 2: Functions for G materials — Amendment 2 calculation of multi-lobed journal bearings TC 155 Nickel and nickel alloys ISO/TS en Plain bearings — Hydrodynamic plain ISO 6501:2020 en Ferronickel — Specification and 31657-3:2020 journal bearings under steady-state fr delivery requirements conditions — Part 3: Functions for G A calculation of tilting pad journal bearings TC 156 Corrosion of metals and alloys ISO/TS en Plain bearings — Hydrodynamic plain ISO en Corrosion of metals and alloys — 31657-4:2020 journal bearings under steady-state 22410:2020 Electrochemical measurement of ion conditions — Part 4: Permissible op- A transfer resistance to characterize C erational parameters for calculation the protective rust layer on weather- of multi-lobed and tilting pad journal ing steel bearings TC 163 Thermal performance and TC 126 Tobacco and tobacco products energy use in the built ISO en Cigarettes — Determination of select- environment 23904:2020 ed phenolic compounds in cigarette ISO 9229:2020 en Thermal insulation — Vocabulary mainstream smoke with an intense B fr smoking regime using HPLC-FLD A ISO en Cigarettes — Determination of 23905:2020 selected phenolic compounds in ISO en Thermal insulating products for build- cigarette mainstream smoke using C 16534:2020 fr ing applications — Determination of HPLC-FLD compressive creep C ISO en Cigarettes — Determination of am- 23920:2020 monia in cigarette mainstream smoke ISO en Thermal insulating products for build- with an intense smoking regime using B 16546:2020 fr ing applications — Determination of ion chromatography freeze-thaw resistance B ISO en Tobacco — Determination of the 22980:2020 fr content of total alkaloids as nicotine ISO en Thermal insulating products for build- — Continuous-flow analysis method B 29470:2020 fr ing applications — Determination of using KSCN/DCIC the apparent density A TC 131 Fluid power systems ISO en Hydraulic fluid power — Cylinders — TC 172 Optics and photonics 10100:2020 fr Acceptance tests ISO en Optics and photonics — Test method B 21395-1:2020 for refractive index of optical glasses — Part 1: Minimum deviation method D ISO en Hydraulic fluid power — Plain-end, 10763:2020 seamless and welded precision steel ISO en Optics and optical instruments — tubes — Dimensions and nominal A 12858-2:2020 Ancillary devices for geodetic instru- working pressures ments — Part 2: Tripods B

20 ISO Update, Supplement to ISO Focus -- July 2020 ISO 8624:2020 en Ophthalmic optics — Spectacle ISO/TR fr Small craft — Electrical devices — fr frames — Measuring system and 10134:2020 Established practices for the design, vocabulary C construction and installation of B lightning-protection systems ISO en Ophthalmic instruments — Fun- TC 190 Soil quality 15004-1:2020 damental requirements and test ISO fr Soil quality — Determination of the methods — Part 1: General require- B 18763:2016 toxic effects of pollutants on ger- ments applicable to all ophthalmic mination and early growth of higher D instruments plants ISO en Ophthalmic implants — Ocular ISO en Soil quality — Test for measuring the 16672:2020 fr endotamponades 23266:2020 fr inhibition of reproduction in oribatid C mites (Oppia nitens) exposed to E

contaminants in soil TC 174 Jewellery and precious metals ISO en Soil quality — Environmental avail- ISO en Jewellery and precious metals — 16751:2020 ability of non-polar organic com- 24018:2020 fr Specifications for 1 kilogram gold bar pounds — Determination of the D A potentially bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing TC 176 Quality management and qual- agent ity assurance TC 198 Sterilization of health care ISO es Quality management — Guidance for 10018:2020 people engagement products B ISO/TS en Sterilization of health care products 11137-4:2020 — Radiation — Part 4: Guidance on process control G TC 178 Lifts, escalators and moving

walks TC 201 Surface chemical analysis ISO en Lifts for the transportation of persons 8100-32:2020 fr and goods — Part 32: Planning and ISO/TR en Surface chemical analysis — Charac- selection of passenger lifts to be F 14187:2020 terization of nanostructured materials installed in office, hotel and residen- F tial buildings ISO en Electrical requirements for lifts, TC 206 Fine ceramics 8102-1:2020 escalators and moving walks — Part ISO en Fine ceramics (advanced ceramics, 1: Electromagnetic compatibility with C 22459:2020 fr advanced technical ceramics) — Re- regard to emission inforcement of ceramic composites C TC 181 Safety of toys — Determination of distribution of tensile strength and tensile strain to ISO 8124- en Safety of toys — Part 1: Safety failure of filaments within a multifila- 1:2018/Amd aspects related to mechanical and ment tow at ambient temperature 1:2020 physical properties — Amendment 1: XZ Flying toys TC 207 Environmental management ISO 8124- en Safety of toys — Part 1: Safety ISO en Environmental management — 1:2018/Amd aspects related to mechanical and 14016:2020 Guidelines on the assurance of 2:2020 physical properties — Amendment 2: XZ environmental reports D Various ISO 8124- en Safety of toys — Part 7: Require- TC 209 Cleanrooms and associated 7:2015/Amd ments and test methods for finger controlled environments 1:2020 paints — Amendment 1 XZ ISO en Cleanrooms and associated con-

14644-3:2019 fr trolled environments — Part 3: Test TC 182 Geotechnics methods G ISO en Geotechnical investigation and 18674-4:2020 fr testing — Geotechnical monitoring TC 210 Quality management and cor- by field instrumentation — Part 4: G responding general aspects for Measurement of pore water pressure: medical devices Piezometers ISO/TR en Medical devices — Guidance on the TC 184 Automation systems and 24971:2020 fr application of ISO 14971 integration H ISO en Data quality — Part 2: Vocabulary 8000-2:2020 TC 215 Health informatics A ISO/TR en Health informatics — Personal health 21835:2020 data generated on a daily basis ISO/TS en Data quality — Part 65: Data quality D 8000-65:2020 management: Process measurement questionnaire E TC 217 Cosmetics ISO en Industrial automation systems and ISO en Cosmetics — Microbiology — Testing 20242-5:2020 integration — Service interface for 21322:2020 fr of impregnated or coated wipes and testing applications — Part 5: Appli- H masks D cation program service interface TC 188 Small craft TC 219 Floor coverings

ISO Update, Supplement to ISO Focus -- July 2020 21 ISO 8543:2020 en Textile floor coverings — Methods for ISO en Energy management systems — fr determination of mass 50004:2020 fr Guidance for the implementation, B maintenance and improvement of F an ISO 50001 energy management system ISO en Textile floor coverings — Installation 18167:2020 practices — General IULTCS International Union of Leather F Technologists and Chemists Societies TC 221 Geosynthetics ISO en Leather — Determination of degrada- ISO en Geotextiles and geotextile-related 20136:2020 fr bility by micro-organisms 22182:2020 products — Determination of index D abrasion resistance characteristics B under wet conditions for hydraulic JTC 1 Information technology applications ISO/IEC en Software and systems engineering TC 229 Nanotechnologies 23643:2020 — Capabilities of software safety and ISO en Nanotechnologies — Measurements security verification tools E 21363:2020 of particle size and shape distri- butions by transmission electron H ISO/IEC TS en Information technology — Process microscopy 33054:2020 assessment — Process reference ISO/TS en Nanotechnologies — Polymeric model for service management G 21975:2020 nanocomposite films for food packaging with barrier properties — D ISO/IEC en Personal identification — ISO- Specification of characteristics and 18013-2:2020 compliant driving licence — Part 2: measurement methods Machine-readable technologies G TC 249 Traditional Chinese medicine ISO en Traditional Chinese medicine — ISO/IEC en Information technology — Generic 22236:2020 Thread-embedding acupuncture TR 11801- cabling systems for customer prem- needle for single use B 9909:2020 ises — Part 9909: Evaluation of bal- D anced cabling in support of 25 Gbit/s for reach greater than 30 metres TC 251 Asset management ISO/IEC en Information technology – Generic ca- ISO es Asset management — Management 11801- bling for customer premises — Part 55002:2018 systems — Guidelines for the ap- 9910:2020 9910: Specifications for modular plug B plication of ISO 55001 G terminated link cabling

ISO/IEC en Information technology — Micropro- TC 264 Fireworks 60559:2020 cessor Systems — Floating-Point ISO en Fireworks — Test methods for arithmetic G 22863-3:2020 fr determination of specific chemical substances — Part 3: Lead and lead B ISO/IEC fr Information technology — Security compounds by atomic absorption 27011:2016 techniques — Code of practice for TC 265 Carbon dioxide capture, Information security controls based E transportation, and geological on ISO/IEC 27002 for telecommuni- cations organizations storage ISO/IEC fr Security techniques — Extension to ISO/TR fr Carbon dioxide capture, transporta- 27701:2019 ISO/IEC 27001 and ISO/IEC 27002 27921:2020 tion, and geological storage — Cross for privacy information management G Cutting Issues — CO2 stream F — Requirements and guidelines composition ISO/IEC fr Information technology — Security TC 276 Biotechnology 29100:2011 techniques — Privacy framework ISO en Biotechnology — Biobanking — D 21899:2020 fr General requirements for the valida- tion and verification of processing D ISO/IEC fr Information technology — Security methods for biological material in 29100:2011/ techniques — Privacy framework — biobanks Amd 1:2018 Amendment 1: Clarifications XZ ISO en Biotechnology — General require- 21973:2020 ments for transportation of cells for ISO/IEC fr Information technology — Security therapeutic use D 29147:2018 techniques — Vulnerability disclosure E ISO/TR fr Biotechnology — Biobanking — Im- 22758:2020 plementation guide for ISO 20387 ISO/IEC en Information technology — Online D 29184:2020 privacy notices and consent D TC 282 Water reuse ISO en Guidelines for performance evalu- ISO/IEC fr Information technology — Security 20468-3:2020 ation of treatment technologies for 30111:2019 techniques — Vulnerability handling water reuse systems — Part 3: Ozone D processes C treatment technology TC 301 Energy management and en- ISO/IEC TR en Information technology — Office ergy savings 22981:2020 equipment — Guidelines for the development of an ontology (vocabu- B lary, components and relationships) for office equipment

22 ISO Update, Supplement to ISO Focus -- July 2020 ISO/IEC en Information technology — Coding of 14496- audio-visual objects — Part 22: Open The following International Standards are confimred for a five year 22:2019/Amd Font Format — Amendment 1: Color B period: 1:2020 font technology and other updates ISO/IEC en Information technology — Multimedia 15938-6:2020 content description interface — Part TC 2 Fasteners 6: Reference software D ISO 225:2010 (reconfirmed)

TC 4 Rolling bearings ISO/IEC en Information technology — JPEG XS 21122-4:2020 low-latency lightweight image cod- ISO 6811:1998 (reconfirmed) ing system — Part 4: Conformance C TC 6 Paper, board and pulps testing ISO 12625-9:2015 ISO/IEC en Information technology — MPEG 23003-3:2020 audio technologies — Part 3: Unified ISO speech and audio coding H 12625-15:2015 ISO ISO/IEC en Information technology — MPEG au- 12625-16:2015 23003-4:2020 dio technologies — Part 4: Dynamic TC 8 Ships and marine technology range control H ISO 24408:2005 (reconfirmed)

ISO 14884:2015 ISO/IEC en Information technology — High ef- 23008-4:2020 ficiency coding and media delivery in TC 10 Technical product documentation heterogeneous environments — Part B ISO 3098-1:2015 4: MMT reference software ISO 128-15:2013 ISO/IEC en Information technology — High ef- 23008-6:2020 ficiency coding and media delivery in ISO 129-4:2013 heterogeneous environments — Part A ISO 5845-1:1995 (reconfirmed) 6: 3D audio reference software ISO 5845-2:1995 (reconfirmed) ISO/IEC en Information technology — Internet 23093-4:2020 of media things — Part 4: Reference TC 22 Road vehicles software and conformance B ISO 18542-2:2014

ISO 3553-2:1997 (reconfirmed) ISO/IEC TR en Information technology — Concepts 19583-23:2020 and usage of metadata — Part 23: ISO 3808:2002 (reconfirmed) Data element exchange (DEX) for a F ISO 3895:1986 (reconfirmed) subset of ISO/IEC 11179-3 ISO 6518-2:1995 (reconfirmed) ISO/IEC en Information technology — Document ISO 7736:1984 (reconfirmed) 19757-3:2020 Schema Definition Languages (DSDL) — Part 3: Rule-based validation us- F ISO 8820-1:2014 ing Schematron ISO 8820-2:2014 ISO/IEC en Information technology — Biometric ISO 8820-9:2014 30107-4:2020 presentation attack detection — Part 4: Profile for testing of mobile devices B ISO 8856:2014 ISO 10455:1992 (reconfirmed) ISO/IEC TR en Information technology — Cloud ISO 10483-1:2004 (reconfirmed) 23187:2020 computing — Interacting with cloud service partners (CSNs) E ISO 10483-2:1996 (reconfirmed) ISO 10486:1992 (reconfirmed) ISO/IEC TR en Information technology — Cloud ISO 10487-1:1992 (reconfirmed) 23951:2020 computing — Guidance for using the ISO (reconfirmed) cloud SLA metric model E 11452-10:2009

ISO 13476:1997 (reconfirmed) ISO/IEC en Information technology — Underwa- 30142:2020 ter acoustic sensor network (UWASN) ISO 3894:2015 — Network management system F ISO 4107:2010 overview and requirements ISO 7141:2005 (reconfirmed) ISO/IEC en Information technology — Underwa- 30143:2020 ter acoustic sensor network (UWASN) ISO 13988:2008 (reconfirmed) — Application profiles F ISO 16833:2006 (reconfirmed)

ISO 4008-3:1987 (reconfirmed)

ISO 6726:1988 (reconfirmed) ISO 13232-1:2005 (reconfirmed) ISO 13232-2:2005 (reconfirmed) ISO 13232-3:2005 (reconfirmed) ISO 13232-4:2005 (reconfirmed) ISO 13232-5:2005 (reconfirmed) Standards confirmed ISO 13232-6:2005 (reconfirmed) ISO 13232-8:2005 (reconfirmed) ISO 12617:2015

ISO Update, Supplement to ISO Focus -- July 2020 23 TC 23 Tractors and machinery for agriculture ISO/TS (reconfirmed) and forestry 17764-1:2002 ISO 13693-2:2015 ISO/TS (reconfirmed) 17764-2:2002 TC 24 Particle characterization including sieving ISO 11053:2009 (reconfirmed) ISO 9276-1:1998 (reconfirmed) ISO 15788-1:1999 (reconfirmed) ISO 9276-5:2005 (reconfirmed) ISO 23275-1:2006 (reconfirmed) ISO 13318-3:2004 (reconfirmed) ISO 23275-2:2006 (reconfirmed) ISO 21501-1:2009 (reconfirmed) TC 35 Paints and varnishes ISO 27891:2015 ISO 11126-9:1999 (reconfirmed) TC 28 Petroleum and related products, fuels TC 37 Language and terminology and lubricants from natural or synthetic ISO 24156-1:2014 (reconfirmed) sources ISO 24622-1:2015 ISO 12185:1996 (reconfirmed) TC 38 Textiles ISO 6743-2:1981 (reconfirmed) ISO 11092:2014 ISO 6743-5:2006 (reconfirmed) ISO 105-A02:1993 (reconfirmed) ISO 6743-8:1987 (reconfirmed) ISO 105-B01:2014 ISO 8068:2006 (reconfirmed) ISO 105-B02:2014 ISO 8216-3:1987 (reconfirmed) ISO 105-B05:1993 (reconfirmed) ISO 8681:1986 (reconfirmed) ISO 105-B07:2009 (reconfirmed) ISO 10050:2005 (reconfirmed) ISO 105-C10:2006 (reconfirmed) TC 29 Small tools ISO 105-F09:2009 (reconfirmed) ISO/TS (reconfirmed) ISO 105-G03:1993 (reconfirmed) 13399-50:2013 ISO 105-J03:2009 (reconfirmed) ISO/TS (reconfirmed) 13399-100:2008 ISO 105-N01:1993 (reconfirmed) ISO/TS ISO 105-N02:1993 (reconfirmed) 13399-305:2017 ISO 105-N03:1993 (reconfirmed) ISO/TS ISO 105-N04:1993 (reconfirmed) 13399-310:2017 ISO 105-N05:1993 (reconfirmed) ISO 603-1:1999 (reconfirmed) ISO 105-P01:1993 (reconfirmed) ISO 603-2:1999 (reconfirmed) ISO 105-S01:1993 (reconfirmed) ISO 603-3:1999 (reconfirmed) ISO 105-S02:1993 (reconfirmed) ISO 603-4:1999 (reconfirmed) ISO 105-S03:1993 (reconfirmed) ISO 603-5:1999 (reconfirmed) ISO 105-X01:1993 (reconfirmed) ISO 603-6:1999 (reconfirmed) ISO 105-X02:1993 (reconfirmed) ISO 603-7:1999 (reconfirmed) ISO 105-X09:1993 (reconfirmed) ISO 603-8:1999 (reconfirmed) ISO 105-X10:1993 (reconfirmed) ISO 603-9:1999 (reconfirmed) ISO 105-Z01:1993 (reconfirmed) ISO 603-10:1999 (reconfirmed) ISO 105-Z02:1993 (reconfirmed) ISO 603-11:1999 (reconfirmed) ISO 105-Z06:1998 (reconfirmed) ISO 603-12:1999 (reconfirmed) ISO 105-Z11:1998 (reconfirmed) ISO 603-13:1999 (reconfirmed) TC 41 Pulleys and belts (including veebelts) ISO 2976:2005 (reconfirmed) ISO 22:1991 (reconfirmed) ISO 3366:1999 (reconfirmed) ISO 8370-1:1993 (reconfirmed) ISO 9136-2:1999 (reconfirmed) ISO 8370-2:1993 (reconfirmed) ISO 9138:2015 TC 42 Photography ISO 10643:2009 (reconfirmed) ISO 5-1:2009 (reconfirmed) TC 30 Measurement of fluid flow in closed ISO 5-2:2009 (reconfirmed) conduits ISO 5-3:2009 (reconfirmed) ISO 5168:2005 (reconfirmed) ISO 5-4:2009 (reconfirmed) TC 33 Refractories ISO 518:2006 (reconfirmed) ISO 16349:2015 ISO 732:2000 (reconfirmed) TC 34 Food products ISO 1007:2000 (reconfirmed) ISO 7513:1990 (reconfirmed) ISO 1012:1998 (reconfirmed) ISO 14502-1:2005 (reconfirmed) ISO 1222:2010 (reconfirmed) ISO 14502-2:2005 (reconfirmed) ISO 1230:2007 (reconfirmed)

24 ISO Update, Supplement to ISO Focus -- July 2020 ISO 1754:2010 (reconfirmed) ISO 1126:2015 ISO 2240:2003 (reconfirmed) ISO 1138:2007 (reconfirmed) ISO 2827:1988 (reconfirmed) ISO 1306:1995 (reconfirmed) ISO 3028:1984 (reconfirmed) ISO 2028:2015 ISO 3664:2009 (reconfirmed) ISO 3136:1983 (reconfirmed) ISO 3943:1993 (reconfirmed) ISO 3900:1995 (reconfirmed) ISO 5989:1995 (reconfirmed) ISO 5794-1:2010 (reconfirmed) ISO 6728:1983 (reconfirmed) ISO 5796:2000 (reconfirmed) ISO 6846:1992 (reconfirmed) ISO 6225-2:1990 (reconfirmed) ISO 9848:2003 (reconfirmed) ISO 7664:2000 (reconfirmed) ISO 10505:2009 (reconfirmed) ISO 7780:1998 (reconfirmed) ISO 14524:2009 (reconfirmed) ISO 8312:2015 ISO 16067-1:2003 (reconfirmed) ISO 8942:2010 (reconfirmed) ISO 17850:2015 ISO 11089:2010 (reconfirmed) ISO 17957:2015 ISO 11234:1995 (reconfirmed) ISO 18383:2015 ISO 12965:2000 (reconfirmed) ISO 18901:2010 (reconfirmed) ISO/TS (reconfirmed) 16095:2014 ISO 18904:2000 (reconfirmed) ISO/TS (reconfirmed) ISO 18906:2000 (reconfirmed) 16096:2014 ISO 18908:2000 (reconfirmed) ISO 17052:2007 (reconfirmed) ISO 18909:2006 (reconfirmed) ISO 18852:2015 ISO 18910:2000 (reconfirmed) ISO 19043:2015 ISO 18911:2010 (reconfirmed) ISO 19051:2015 ISO 18915:2000 (reconfirmed) ISO 20299-1:2015 ISO 18916:2007 (reconfirmed) ISO 21561-1:2015 ISO 18932:2009 (reconfirmed) ISO 28343:2010 (reconfirmed) ISO 19084:2015 ISO 5981:2007 (reconfirmed) ISO 19262:2015 ISO 7854:1995 (reconfirmed) ISO 20462-1:2005 (reconfirmed) ISO 8095:1990 (reconfirmed) ISO 20462-2:2005 (reconfirmed) ISO 13362:2000 (reconfirmed) TC 43 Acoustics TC 48 Laboratory equipment ISO/TS (reconfirmed) ISO 695:1991 (reconfirmed) 7849-1:2009 ISO 4142:2002 (reconfirmed) ISO/TS (reconfirmed) 7849-2:2009 TC 51 Pallets for unit load method of materi- ISO/TS als handling 11819-3:2017 ISO 6780:2003 (reconfirmed) ISO/TS ISO 18613:2014 13471-1:2017 TC 54 Essential oils ISO/TS (reconfirmed) 13475-2:2000 ISO 279:1998 (reconfirmed) ISO 17534-1:2015 ISO 280:1998 (reconfirmed) ISO 3822-4:1997 (reconfirmed) ISO 592:1998 (reconfirmed) ISO 15186-2:2003 (reconfirmed) ISO 3033-1:2005 (reconfirmed) ISO 15186-3:2002 (reconfirmed) ISO 3033-2:2005 (reconfirmed) ISO 16283-1:2014 ISO 3033-3:2005 (reconfirmed) TC 44 Welding and allied processes ISO 3033-4:2005 (reconfirmed) ISO 10447:2015 ISO 3064:2015 ISO 14323:2015 ISO 3215:1998 (reconfirmed) ISO 14373:2015 ISO 3520:1998 (reconfirmed) TC 45 Rubber and rubber products ISO 3526:2005 (reconfirmed) ISO 4728:2003 (reconfirmed) ISO 4080:2009 (reconfirmed) ISO 7359:1985 (reconfirmed) ISO 289-1:2015 ISO 7609:1985 (reconfirmed) ISO 6133:2015 ISO 9842:2003 (reconfirmed) ISO 10398:1998 (reconfirmed) ISO 9844:2006 (reconfirmed) ISO 705:2015 ISO 10624:1998 (reconfirmed) ISO 1125:2015

ISO Update, Supplement to ISO Focus -- July 2020 25 ISO 11019:1998 (reconfirmed) ISO 361:1975 (reconfirmed) ISO 11024-1:1998 (reconfirmed) ISO/ASTM 51608:2015 ISO 11024-2:1998 (reconfirmed) ISO/ASTM ISO 11043:1998 (reconfirmed) 51649:2015 ISO 14714:1998 (reconfirmed) ISO/ASTM ISO 14716:1998 (reconfirmed) 51707:2015 ISO 23954:2009 (reconfirmed) TC 92 Fire safety TC 58 Gas cylinders ISO 834-1:1999 (reconfirmed) ISO 11118:2015 TC 93 Starch (including derivatives and ISO 11120:2015 by-products) ISO 21172-1:2015 ISO 1666:1996 (reconfirmed) TC 61 Plastics TC 94 Personal safety -- Personal protective ISO 9773:1998 (reconfirmed) equipment ISO 25762:2009 (reconfirmed) ISO 6530:2005 (reconfirmed) ISO 25337:2010 (reconfirmed) ISO 9150:1988 (reconfirmed) ISO 22088-1:2006 (reconfirmed) ISO 13998:2003 (reconfirmed) ISO 22088-2:2006 (reconfirmed) ISO 13999-3:2002 (reconfirmed) ISO 22088-3:2006 (reconfirmed) ISO 14877:2002 (reconfirmed) ISO 22088-4:2006 (reconfirmed) ISO 16603:2004 (reconfirmed) ISO 22088-5:2006 (reconfirmed) ISO 16604:2004 (reconfirmed) ISO 22088-6:2006 (reconfirmed) ISO 22609:2004 (reconfirmed) ISO 182-1:1990 (reconfirmed) ISO 22612:2005 (reconfirmed) ISO 182-2:1990 (reconfirmed) TC 96 Cranes ISO 182-4:1993 (reconfirmed) ISO 10972-2:2009 (reconfirmed) ISO 585:1990 (reconfirmed) ISO 11662-2:2014 ISO 1061:1990 (reconfirmed) TC 105 Steel wire ropes ISO 1264:1980 (reconfirmed) ISO 2232:1990 (reconfirmed) ISO 1265:2007 (reconfirmed) ISO 6984:1990 (reconfirmed) ISO 1600:1990 (reconfirmed) TC 106 Dentistry ISO 1628-3:2010 (reconfirmed) ISO 13116:2014 ISO 4575:2007 (reconfirmed) ISO 9168:2009 (reconfirmed) ISO 18263-1:2015 ISO 4073:2009 (reconfirmed) ISO 18263-2:2015 ISO 7493:2006 (reconfirmed) ISO 19062-1:2015 ISO 9687:2015 ISO 19063-1:2015 ISO 16409:2016 ISO 19064-1:2015 TC 108 Mechanical vibration, shock and condi- ISO 19069-1:2015 tion monitoring TC 69 Applications of statistical methods ISO 6897:1984 (reconfirmed) ISO/TS (reconfirmed) ISO 22514-8:2014 15694:2004 TC 72 Textile machinery and accessories TC 111 Round steel link chains, chain slings, ISO 23771:2015 components and accessories TC 74 Cement and lime ISO 16872:2015 ISO 679:2009 (reconfirmed) ISO 16877:2015 ISO 29582-1:2009 (reconfirmed) ISO 16798:2004 (reconfirmed) TC 76 Transfusion, infusion and injection, and TC 113 Hydrometry blood processing equipment for medi- ISO 4375:2014 cal and pharmaceutical use TC 118 Compressors and pneumatic tools, ISO 8362-7:2006 (reconfirmed) machines and equipment ISO 8871-4:2006 (reconfirmed) ISO 10439-1:2015 ISO 11418-5:2015 ISO 10439-2:2015 TC 83 Sports and other recreational facilities ISO 10439-3:2015 and equipment ISO 10439-4:2015 ISO 7152:1997 (reconfirmed) ISO 12500-1:2007 (reconfirmed) ISO 9119:1990 (reconfirmed) ISO 12500-3:2009 (reconfirmed) TC 85 Nuclear energy, nuclear technologies, and radiological protection TC 119 Powder metallurgy

26 ISO Update, Supplement to ISO Focus -- July 2020 ISO 3312:1987 (reconfirmed) ISO 7539-2:1989 (reconfirmed) ISO 4498:2010 (reconfirmed) ISO 7539-3:1989 (reconfirmed) ISO 23519:2010 (reconfirmed) ISO 7539-4:1989 (reconfirmed) ISO 3907:2009 (reconfirmed) ISO 7539-5:1989 (reconfirmed) ISO 3908:2009 (reconfirmed) ISO 12732:2006 (reconfirmed) ISO 11876:2010 (reconfirmed) ISO 21610:2009 (reconfirmed) TC 130 Graphic technology TC 160 Glass in building ISO 11084-2:2006 (reconfirmed) ISO 1288-3:2016 ISO 12642-2:2006 (reconfirmed) ISO 22897:2003 (reconfirmed) ISO 12647-5:2015 TC 163 Thermal performance and energy use ISO 15930-4:2003 (reconfirmed) in the built environment ISO 15930-6:2003 (reconfirmed) ISO 16956:2015 TC 131 Fluid power systems TC 168 Prosthetics and orthotics ISO 6194-3:2009 (reconfirmed) ISO 13405-1:2015 TC 138 Plastics pipes, fittings and valves for ISO 13405-2:2015 the transport of fluids ISO 13405-3:2015 ISO 14531-4:2006 (reconfirmed) ISO 29783-2:2015 ISO 3213:2009 (reconfirmed) TC 171 Document management applications ISO 3458:2015 ISO 3334:2006 (reconfirmed) ISO 3503:2015 ISO 17469-1:2015 ISO 6259-1:2015 TC 172 Optics and photonics ISO 12162:2009 (reconfirmed) ISO 9022-6:2015 ISO 13845:2015 ISO 9022-7:2015 ISO 13967:2009 (reconfirmed) ISO 9022-8:2015 TC 146 Air quality ISO 9022-11:2015 ISO 16740:2005 (reconfirmed) ISO 9022-17:2015 ISO 17621:2015 ISO 8036:2015 ISO 21438-2:2009 (reconfirmed) ISO 8600-2:2015 ISO 19289:2015 ISO 19012-3:2015 TC 147 Water quality ISO 19055:2015 ISO 17690:2015 ISO 19056-1:2015 ISO 17852:2006 (reconfirmed) TC 173 Assistive products ISO 18857-2:2009 (reconfirmed) ISO 10542-1:2012 (reconfirmed) ISO 22743:2006 (reconfirmed) TC 174 Jewellery and precious metals ISO 23913:2006 (reconfirmed) ISO 11210:2014 ISO 24293:2009 (reconfirmed) ISO 11427:2014 ISO 9509:2006 (reconfirmed) ISO 11490:2015 ISO 5667-7:1993 (reconfirmed) ISO 13756:2015 ISO 5667-8:1993 (reconfirmed) TC 178 Lifts, escalators and moving walks ISO 5667-15:2009 (reconfirmed) ISO 25745-3:2015 TC 150 Implants for surgery TC 183 Copper, lead, zinc and nickel ores and ISO 7206-4:2010 (reconfirmed) concentrates ISO 14243-1:2009 (reconfirmed) ISO 10469:2006 (reconfirmed) TC 153 Valves ISO 13291:2006 (reconfirmed) ISO 5208:2015 ISO 13292:2006 (reconfirmed) ISO 15848-1:2015 TC 184 Automation systems and integration ISO 15848-2:2015 ISO 6983-1:2009 (reconfirmed) ISO 17292:2015 ISO 8000-100:2016 TC 155 Nickel and nickel alloys TC 193 Natural gas ISO 7530-7:1992 (reconfirmed) ISO 20765-2:2015 ISO 7530-8:1992 (reconfirmed) ISO 7530-9:1993 (reconfirmed) TC 199 Safety of machinery ISO 21469:2006 (reconfirmed) ISO 9388:1992 (reconfirmed) TC 156 Corrosion of metals and alloys TC 204 Intelligent transport systems ISO/TS ISO 7441:2015 17574:2017

ISO Update, Supplement to ISO Focus -- July 2020 27 TC 207 Environmental management ISO/IEC (reconfirmed) 15475-3:2002 ISO/TS 14027:2017 ISO/IEC (reconfirmed) 15476-1:2002 TC 211 Geographic information/Geomatics ISO/IEC (reconfirmed) ISO 19144-1:2009 (reconfirmed) 15476-2:2002 TC 215 Health informatics ISO/IEC ISO/TS 19793:2015 18062:2016 ISO/IEC (reconfirmed) TC 219 Floor coverings 20968:2002 ISO 1766:1999 (reconfirmed) ISO/IEC 24744:2014 ISO 2094:1999 (reconfirmed) ISO/IEC TS ISO 2550:1972 (reconfirmed) 24748-6:2016 ISO 3018:1974 (reconfirmed) ISO/IEC ISO 10874:2009 (reconfirmed) 25000:2014 ISO 11861:1999 (reconfirmed) ISO/IEC 25001:2014 ISO 24339:2006 (reconfirmed) ISO/IEC ISO 24340:2006 (reconfirmed) 25051:2014 ISO 24341:2006 (reconfirmed) ISO/IEC ISO 24345:2006 (reconfirmed) 29155-2:2013 TC 228 Tourism and related services ISO/IEC ISO 13009:2015 33001:2015 ISO 17680:2015 ISO/IEC 33002:2015 ISO 18065:2015 ISO/IEC TC 229 Nanotechnologies 33003:2015 ISO/TS (reconfirmed) ISO/IEC 13830:2013 33004:2015 ISO/TS ISO/IEC TS 19590:2017 33052:2016 TC 256 Pigments, dyestuffs and extenders ISO/IEC TS ISO 591-1:2000 (reconfirmed) 33072:2016 ISO 787-3:2000 (reconfirmed) ISO/IEC 15459-2:2015 ISO 787-8:2000 (reconfirmed) ISO 17363:2013 ISO 1248:2006 (reconfirmed) ISO/IEC ISO 1249:1974 (reconfirmed) 18000-7:2014 ISO 2495:1995 (reconfirmed) ISO/IEC/IEEE ISO 18314-1:2015 21451-1:2010 ISO 18473-1:2015 ISO/IEC/IEEE 21451-2:2010 ISO 23900-1:2015 ISO/IEC ISO 23900-2:2015 29167-1:2014 ISO 23900-3:2015 ISO/IEC ISO 23900-4:2015 29167-11:2014 ISO 23900-5:2015 ISO/IEC 11179-5:2015 ISO 23900-6:2015 ISO/IEC (reconfirmed) TC 301 Energy management and energy 12785-1:2009 savings ISO/IEC ISO 17742:2015 20006-2:2015 ISO 50015:2014 ISO/IEC (reconfirmed) JTC 1 Information technology 24703:2004

ISO/IEC (reconfirmed) 14102:2008 ISO/IEC (reconfirmed) 15474-1:2002 ISO/IEC (reconfirmed) 15474-2:2002 ISO/IEC (reconfirmed) Standards withdrawn 15475-1:2002 ISO/IEC (reconfirmed) 15475-2:2002

28 ISO Update, Supplement to ISO Focus -- July 2020 Period from 01 June to 01 July 2020

TC 8 Ships and marine technology ISO/PAS (replaced by ISO 21195:2020) 21195:2018 TC 10 Technical product documentation ISO 128-30:2001 (replaced by ISO 128-3:2020) ISO 128-40:2001 (replaced by ISO 128-3:2020) ISO 128-50:2001 (replaced by ISO 128-3:2020) ISO 128-34:2001 (replaced by ISO 128-3:2020) ISO 128-44:2001 (replaced by ISO 128-3:2020) ISO 128-33:2018 (replaced by ISO 128-3:2020) TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO 20785-1:2012 (replaced by ) TC 87 Cork ISO 9986:2014 (replaced by ) TC 106 Dentistry ISO/TS (replaced by ISO 22052:2020) 22595-2:2008 TC 159 Ergonomics ISO/TS (replaced by ) 21144:2016 TC 178 Lifts, escalators and moving walks ISO 4190-6:1984 (replaced by ISO 8100-32:2020) ISO 22199:2009 (replaced by ISO 8102-1:2020) TC 190 Soil quality ISO/TS (replaced by ISO 16751:2020) 16751:2018 TC 199 Safety of machinery ISO/TR (replaced by ) 23849:2010 TC 219 Floor coverings ISO/PAS (replaced by ISO 18167:2020) 18167:2014

Meeting calendar

The meeting calendar is available at https://www.iso.org/meeting-calendar.html

ISO Update, Supplement to ISO Focus -- July 2020 29