Standards published
New International Standards published between 01 November and 30 November 2014
* Available in English only
** French version of standard previously published in English only
Price group TC 6 Paper, board and pulps
ISO 8784-1:2014 Pulp, paper and board — Microbiological examination — Part 1: C Enumeration of bacteria and bacterial spores based on disintegration TC 8 Ships and marine technology
ISO 7236:2014 * Ships and marine technology — Inland navigation vessels — Mounting B attachments for demountable signal masts for push-tows
ISO 14886:2014 Ships and marine technology — Large yachts — Structural fire protection for B FRP yachts TC 10 Technical product documentation
IEC 82045-2:2004/Cor * Document management — Part 2: Metadata elements and information free 1:2014 reference model — Technical Corrigendum 1
ISO/TR 16310:2014 * Symbol libraries for construction and facilities management C TC 17 Steel
ISO 683-3:2014 * Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case- F hardening steels
ISO 683-5:2014 * Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding E steels TC 20 Aircraft and space vehicles
ISO 7169:2014 * Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, D for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric TC 22 Road vehicles
ISO 8820-1:2014 * Road vehicles — Fuse-links — Part 1: Definitions and general test B requirements
ISO 16845-2:2014 * Road vehicles — Controller area network (CAN) conformance test plan — H Part 2: High-speed medium access unit with selective wake-up functionality
ISO/TS 17536-3:2014 * Road vehicles — Aerosol separator performance test for internal combustion B engines — Part 3: Method to perform engine gravimetric test
ISO 18418-1:2014 * Gasoline engines — Medium pressure liquid fuel supply connections — Part A 1: 60° female cone connectors
ISO 18418-2:2014 * Gasoline engines — Medium pressure liquid fuel supply connections — Part B 2: Pipe assemblies
ISO 6460-2:2014 * Motorcycles — Measurement method for gaseous exhaust emissions and G fuel consumption — Part 2: Test cycles and specific test conditions TC 23 Tractors and machinery for agriculture and forestry
ISO 23205:2014 * Agricultural tractors — Instructional seat A
ISO 4254-13:2012 * Agricultural machinery — Safety — Part 13: Large rotary mowers F
ISO 9635-1:2014 * Agricultural irrigation equipment — Irrigation valves — Part 1: General D requirements
ISO 9635-2:2014 * Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating C valves
ISO 9635-3:2014 * Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves B
ISO 9635-4:2014 * Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves C TC 24 Particle characterization including sieving
ISO 13317-4:2014 * Determination of particle size distribution by gravitational liquid C sedimentation methods — Part 4: Balance method TC 28 Petroleum products and lubricants
ISO 17196:2014 * Dimethyl ether (DME) for fuels — Determination of impurities — Gas D chromatographic method
ISO 17197:2014 * Dimethyl ether (DME) for fuels — Determination of water content — Karl B Fischer titration method
ISO 17198:2014 Dimethyl ether (DME) for fuels — Determination of total sulfur, ultraviolet C fluorescence method TC 34 Food products
ISO 11133:2014 Microbiology of food, animal feed and water — Preparation, production, H storage and performance testing of culture media
ISO 12966-1:2014 Animal and vegetable fats and oils — Gas chromatography of fatty acid B methyl esters — Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters TC 37 Terminology and other language and content resources
ISO 13611:2014 Interpreting — Guidelines for community interpreting C
TC 38 Textiles
ISO 17617:2014 Textiles — Determination of moisture drying rate D
ISO 675:2014 Textiles — Woven fabrics — Determination of dimensional change on A commercial laundering near the boiling point TC 39 Machine tools ISO 10791-7:2014 * Test conditions for machining centres — Part 7: Accuracy of finished test D pieces
ISO 11090-1:2014 * Test conditions for die sinking electro-discharge machines (die sinking EDM) D — Testing of the accuracy — Part 1: Single-column machines (cross-slide table type and fixed-table type)
ISO 11090-2:2014 * Test conditions for die sinking electro-discharge machines (die sinking EDM) D — Testing of the accuracy — Part 2: Double-column machines (slide-head type)
ISO/TR 17243-1:2014 * Machine tool spindles — Evaluation of machine tool spindle vibrations by C measurements on spindle housing — Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1 TC 41 Pulleys and belts (including veebelts)
ISO 13050:2014 * Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R G and S, belts and pulleys TC 42 Photography
ISO 18943:2014 * Imaging materials — Magnetic hard drives used for image storage — Care C and handling TC 43 Acoustics
ISO 17497- * Acoustics — Sound-scattering properties of surfaces — Part 1: XZ 1:2004/Amd 1:2014 Measurement of the random-incidence scattering coefficient in a reverberation room — Amendment 1 TC 45 Rubber and rubber products
ISO 18064:2014 Thermoplastic elastomers — Nomenclature and abbreviated terms A
ISO 815-2:2014 Rubber, vulcanized or thermoplastic — Determination of compression set — C Part 2: At low temperatures
ISO 11346:2014 Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum B temperature of use
ISO 5794-2:2014 * Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: A Evaluation procedures in styrene-butadiene rubber TC 46 Information and documentation
ISO 10161-1:2014 * Information and documentation — Open Systems Interconnection — H Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification
ISO/TS 28560-4:2014 * Information and documentation — RFID in libraries — Part 4: Encoding of G data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory TC 60 Gears
ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears E — Part 1: Introduction and basic principles
ISO/TR 15144-2:2014 Calculation of micro-pitting load capacity of cylindrical spur and helical gears F — Part 2: Examples of calculation for micropitting TC 61 Plastics
ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene- B propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 13503-6:2014 Petroleum and natural gas industries — Completion fluids and materials — C Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions
ISO 19901-8:2014 * Petroleum and natural gas industries — Specific requirements for offshore H structures — Part 8: Marine soil investigations TC 68 Financial services
ISO 9362:2014 * Banking — Banking telecommunication messages — Business identifier A code (BIC) TC 70 Internal combustion engines
ISO 7967-10:2014 * Reciprocating internal combustion engines — Vocabulary of components B and systems — Part 10: Ignition systems
ISO 7967-12:2014 * Reciprocating internal combustion engines — Vocabulary of components B and systems — Part 12: Exhaust emission control systems TC 72 Textile machinery and accessories
ISO 93-2:2006/Amd * Textile machinery and accessories — Cylindrical sliver cans — Part 2: XZ 1:2014 Spring bottoms — Amendment 1 TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 17099:2014 * Radiological protection — Performance criteria for laboratories using the E cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry TC 86 Refrigeration and air-conditioning
ISO 16494:2014 * Heat recovery ventilators and energy recovery ventilators — Method of test F for performance TC 108 Mechanical vibration, shock and condition monitoring
ISO 16063- * Methods for the calibration of vibration and shock transducers — Part 22: XZ 22:2005/Amd 1:2014 Shock calibration by comparison to a reference transducer — Amendment 1 TC 113 Hydrometry ISO 4375:2014 Hydrometry — Cableway systems for stream gauging D
ISO/TR 13973:2014 * Artificial recharge to groundwater E TC 131 Fluid power systems
ISO 8132:2014 Hydraulic fluid power — Mounting dimensions for accessories for single rod C cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
ISO 8133:2014 Hydraulic fluid power — Mounting dimensions for accessories for single rod C cylinders, 16 MPa (160 bar) compact series
ISO/TR 16386:2014 * Impact of changes in ISO fluid power particle counting — Contamination C control and filter test standards TC 146 Air quality
ISO 16000-20:2014 * Indoor air — Part 20: Detection and enumeration of moulds — Determination C of total spore count TC 150 Implants for surgery
ISO 8828:2014 * Implants for surgery — Guidance on care and handling of orthopaedic A implants TC 154 Processes, data elements and documents in commerce, industry and administration
ISO 14533-1:2014 * Processes, data elements and documents in commerce, industry and D administration — Long term signature profiles — Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO 8009:2014 * Mechanical contraceptives — Reusable natural and silicone rubber D contraceptive diaphragms — Requirements and tests TC 163 Thermal performance and energy use in the built environment
ISO 29467:2008/Amd * Thermal insulating products for building applications — Determination of XZ 1:2014 squareness — Amendment 1
ISO 29471:2008/Amd * Thermal insulating products for building applications — Determination of XZ 1:2014 dimensional stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity) — Amendment 1
ISO 29472:2008/Amd * Thermal insulating products for building applications — Determination of XZ 1:2014 dimensional stability under specified temperature and humidity conditions — Amendment 1
ISO 29767:2008/Amd * Thermal insulating products for building applications — Determination of XZ 1:2014 short-term water absorption by partial immersion — Amendment 1
ISO 29771:2008/Amd * Thermal insulating materials for building applications — Determination of XZ 1:2014 organic content — Amendment 1 TC 172 Optics and photonics ISO 14132-3:2014 * Optics and photonics — Vocabulary for telescopic systems — Part 3: Terms A for telescopic sights TC 173 Assistive products for persons with disability
ISO 7176-8:2014 * Wheelchairs — Part 8: Requirements and test methods for static, impact and G fatigue strengths TC 174 Jewellery
ISO 9202:2014 * Jewellery — Fineness of precious metal alloys A
ISO 11210:2014 * Jewellery — Determination of platinum in platinum jewellery alloys — A Gravimetric method after precipitation of diammonium hexachloroplatinate
ISO 11426:2014 * Jewellery — Determination of gold in gold jewellery alloys — Cupellation B method (fire assay)
ISO 11494:2014 Jewellery — Determination of platinum in platinum jewellery alloys — ICP- B OES method using yttrium as internal standard element
ISO 11495:2014 * Jewellery — Determination of palladium in palladium jewellery alloys — ICP- B OES method using yttrium as internal standard element TC 182 Geotechnics
ISO 17892-1:2014 * Geotechnical investigation and testing — Laboratory testing of soil — Part 1: B Determination of water content
ISO 17892-2:2014 * Geotechnical investigation and testing — Laboratory testing of soil — Part 2: C Determination of bulk density TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 13547-2:2014 * Copper, lead, zinc and nickel sulfide concentrates — Determination of C arsenic — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method TC 184 Automation systems and integration
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1001:2014 and exchange — Part 1001: Application module: Appearance assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1002:2014 and exchange — Part 1002: Application module: Colour
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1003:2014 and exchange — Part 1003: Application module: Curve appearance
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1004:2014 and exchange — Part 1004: Application module: Elemental geometric shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1005:2014 and exchange — Part 1005: Application module: Elemental topology
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1008:2014 and exchange — Part 1008: Application module: Layer assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1010:2014 and exchange — Part 1010: Application module: Date time ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1014:2014 and exchange — Part 1014: Application module: Date time assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1022:2014 and exchange — Part 1022: Application module: Part and version identification
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1023:2014 and exchange — Part 1023: Application module: Part view definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1026:2014 and exchange — Part 1026: Application module: Assembly structure
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1027:2014 and exchange — Part 1027: Application module: Contextual shape positioning
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1030:2014 and exchange — Part 1030: Application module: Property assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1032:2014 and exchange — Part 1032: Application module: Shape property assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1033:2014 and exchange — Part 1033: Application module: External model
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1034:2014 and exchange — Part 1034: Application module: Product view definition properties
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1041:2014 and exchange — Part 1041: Application module: Product view definition relationship
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1042:2014 and exchange — Part 1042: Application module: Work request
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1043:2014 and exchange — Part 1043: Application module: Work order
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1047:2014 and exchange — Part 1047: Application module: Activity
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1049:2014 and exchange — Part 1049: Application module: Activity method
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1050:2014 and exchange — Part 1050: Application module: Dimension tolerance
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1051:2014 and exchange — Part 1051: Application module: Geometric tolerance
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1052:2014 and exchange — Part 1052: Application module: Default tolerance
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1054:2014 and exchange — Part 1054: Application module: Value with unit
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1057:2014 and exchange — Part 1057: Application module: Effectivity
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1059:2014 and exchange — Part 1059: Application module: Effectivity application ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1061:2014 and exchange — Part 1061: Application module: Project
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1063:2014 and exchange — Part 1063: Application module: Product occurrence
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1068:2014 and exchange — Part 1068: Application module: Constructive solid geometry 3D
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1070:2014 and exchange — Part 1070: Application module: Class
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1103:2014 and exchange — Part 1103: Application module: Product class
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1104:2014 and exchange — Part 1104: Application module: Specified product
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1106:2014 and exchange — Part 1106: Application module: Extended measure representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1108:2014 and exchange — Part 1108: Application module: Specification based configuration
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1109:2014 and exchange — Part 1109: Application module: Alternative solution
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1110:2014 and exchange — Part 1110: Application module: Surface conditions
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1111:2014 and exchange — Part 1111: Application module: Classification with attributes
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1112:2014 and exchange — Part 1112: Application module: Specification control
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1114:2014 and exchange — Part 1114: Application module: Classification assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1115:2014 and exchange — Part 1115: Application module: Part collection
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1121:2014 and exchange — Part 1121: Application module: Document and version identification
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1122:2014 and exchange — Part 1122: Application module: Document assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1126:2014 and exchange — Part 1126: Application module: Document properties
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1130:2014 and exchange — Part 1130: Application module: Derived shape element
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1131:2014 and exchange — Part 1131: Application module: Construction geometry
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1132:2014 and exchange — Part 1132: Application module: Associative text ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1136:2014 and exchange — Part 1136: Application module: Text appearance
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1141:2014 and exchange — Part 1141: Application module: Requirement view definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1142:2014 and exchange — Part 1142: Application module: Requirement view definition relationship
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1147:2014 and exchange — Part 1147: Application module: Manufacturing configuration effectivity
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1206:2014 and exchange — Part 1206: Application module: Draughting annotation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1231:2014 and exchange — Part 1231: Application module: Product data management
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1246:2014 and exchange — Part 1246: Application module: Attribute classification
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1248:2014 and exchange — Part 1248: Application module: Product breakdown
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1275:2014 and exchange — Part 1275: Application module: External class
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1288:2014 and exchange — Part 1288: Application module: Management resource information
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1309:2014 and exchange — Part 1309: Application module: Drawing definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1311:2014 and exchange — Part 1311: Application module: Associative draughting elements
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1312:2014 and exchange — Part 1312: Application module: Draughting element specialisations
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1316:2014 and exchange — Part 1316: Application module: Camera view 3D
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1317:2014 and exchange — Part 1317: Application module: Procedural shape model
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1319:2014 and exchange — Part 1319: Application module: Solid with local modification
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1320:2014 and exchange — Part 1320: Application module: Thickened face solid
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1323:2014 and exchange — Part 1323: Application module: Basic geometric topology
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1341:2014 and exchange — Part 1341: Application module: Generic expression
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1342:2014 and exchange — Part 1342: Application module: Expression ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1343:2014 and exchange — Part 1343: Application module: Product placement
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1344:2014 and exchange — Part 1344: Application module: Numerical interface
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1345:2014 and exchange — Part 1345: Application module: Item definition structure
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1346:2014 and exchange — Part 1346: Application module: Numeric function
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1349:2014 and exchange — Part 1349: Application module: Incomplete data reference mechanism
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1350:2014 and exchange — Part 1350: Application module: Inertia characteristics
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1362:2014 and exchange — Part 1362: Application module: Dimension and tolerance callouts
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1372:2014 and exchange — Part 1372: Application module: Analysis
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1373:2014 and exchange — Part 1373: Application module: Analysis product relationships
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1374:2014 and exchange — Part 1374: Application module: Analysis shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1375:2014 and exchange — Part 1375: Application module: Cfd conditions
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1376:2014 and exchange — Part 1376: Application module: Cfd equations
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1377:2014 and exchange — Part 1377: Application module: Cfd model
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1378:2014 and exchange — Part 1378: Application module: Cfd results
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1379:2014 and exchange — Part 1379: Application module: Cfd specified general property
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1380:2014 and exchange — Part 1380: Application module: Fea definition relationships
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1381:2014 and exchange — Part 1381: Application module: Finite element analysis
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1382:2014 and exchange — Part 1382: Application module: Finite element shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1383:2014 and exchange — Part 1383: Application module: Finite elements
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1384:2014 and exchange — Part 1384: Application module: Mesh connectivity ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1385:2014 and exchange — Part 1385: Application module: Mesh function
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1386:2014 and exchange — Part 1386: Application module: Mesh topology
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1387:2014 and exchange — Part 1387: Application module: Product analysis
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1403:2014 and exchange — Part 1403: Application module: Geometric model relationship
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1453:2014 and exchange — Part 1453: Application module: Function based behaviour
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1470:2014 and exchange — Part 1470: Application module: Parameter value specification
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1491:2014 and exchange — Part 1491: Application module: Expression assignment
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1507:2014 and exchange — Part 1507: Application module: Geometrically bounded surface
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1509:2014 and exchange — Part 1509: Application module: Manifold surface
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1511:2014 and exchange — Part 1511: Application module: Topologically bounded surface
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1520:2014 and exchange — Part 1520: Application module: Product data quality definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1521:2014 and exchange — Part 1521: Application module: Poduct data quality criteria
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1522:2014 and exchange — Part 1522: Application module: Product data quality inspection result
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1523:2014 and exchange — Part 1523: Application module: Shape data quality criteria
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1524:2014 and exchange — Part 1524: Shape data quality inspection result
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1525:2014 and exchange — Part 1525: Application module: Composite surface
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1526:2014 and exchange — Part 1526: Application module: Numeric expression
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1527:2014 and exchange — Part 1527: Application module: Elementary function
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1601:2014 and exchange — Part 1601: Application module: Altered package
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1603:2014 and exchange — Part 1603: Application module: Analytical model
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1613:2014 and exchange — Part 1613: Application module: Physical unit non planar design view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1628:2014 and exchange — Part 1628: Application module: Design product data management
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1634:2014 and exchange — Part 1634: Application module: Assembly component placement requirements
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1636:2014 and exchange — Part 1636: Application module: Assembly module design
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1637:2014 and exchange — Part 1637: Application module: Assembly module macro definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1640:2014 and exchange — Part 1640: Application module: Assembly module with macro component
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1641:2014 and exchange — Part 1641: Application module: Assembly module with subassembly
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1642:2014 and exchange — Part 1642: Application module: Assembly module usage view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1643:2014 and exchange — Part 1643: Application module: Assembly module with interconnect component
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1644:2014 and exchange — Part 1644: Application module: Assembly module with cable component
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1645:2014 and exchange — Part 1645: Application module: Assembly module with packaged connector component
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1646:2014 and exchange — Part 1646: Application module: Footprint definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1647:2014 and exchange — Part 1647: Application module: Assembly physical interface requirement
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1648:2014 and exchange — Part 1648: Application module: Assembly physical requirement allocation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1649:2014 and exchange — Part 1649: Application module: Assembly technology
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1650:2014 and exchange — Part 1650: Application module: Bare die
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1651:2014 and exchange — Part 1651: Application module: Basic curve ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1652:2014 and exchange — Part 1652: Application module: Basic geometry
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1653:2014 and exchange — Part 1653: Application module: Cable
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1654:2014 and exchange — Part 1654: Application module: Characteristic
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1656:2014 and exchange — Part 1656: Application module: Component grouping
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1657:2014 and exchange — Part 1657: Application module: Component feature
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1660:2014 and exchange — Part 1660: Application module: Datum difference based model
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1662:2014 and exchange — Part 1662: Application module: Design specific assignment to assembly usage view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1663:2014 and exchange — Part 1663: Application module: Design specific assignment to interconnect usage view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1667:2014 and exchange — Part 1667: Application module: Extended basic geometry
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1668:2014 and exchange — Part 1668: Application module: Fabrication joint
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1669:2014 and exchange — Part 1669: Application module: Fabrication requirement
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1670:2014 and exchange — Part 1670: Application module: Fabrication technology
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1671:2014 and exchange — Part 1671: Application module: Feature and connection zone
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1676:2014 and exchange — Part 1676: Application module: Functional decomposition to design
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1681:2014 and exchange — Part 1681: Application module: Generic material aspects
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1682:2014 and exchange — Part 1682: Application module: Interconnect 2D shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1685:2014 and exchange — Part 1685: Application module: Interconnect module to assembly module relationship
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1686:2014 and exchange — Part 1686: Application module: Interconnect module usage view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1687:2014 and exchange — Part 1687: Application module: Interconnect module with macros ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1689:2014 and exchange — Part 1689: Application module: Interconnect physical requirement allocation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1690:2014 and exchange — Part 1690: Application module: Interconnect placement requirements
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1691:2014 and exchange — Part 1691: Application module: Interface component
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1692:2014 and exchange — Part 1692: Application module: Land
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1693:2014 and exchange — Part 1693: Application module: Layered 2D shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1696:2014 and exchange — Part 1696: Application module: Layered interconnect module 3D design
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1698:2014 and exchange — Part 1698: Application module: Layered interconnect module design
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1700:2014 and exchange — Part 1700: Application module: Layered interconnect module with printed component design
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1701:2014 and exchange — Part 1701: Application module: Layout macro definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1702:2014 and exchange — Part 1702: Application module: Manifold subsurface
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1703:2014 and exchange — Part 1703: Application module: Model parameter
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1704:2014 and exchange — Part 1704: Application module: Network functional design view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1705:2014 and exchange — Part 1705: Application module: Functional usage view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1706:2014 and exchange — Part 1706: Application module: Non feature shape element
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1707:2014 and exchange — Part 1707: Application module: Package
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1709:2014 and exchange — Part 1709: Application module: Packaged part white box model
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1711:2014 and exchange — Part 1711: Application module: Part external reference
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1712:2014 and exchange — Part 1712: Application module: Part feature function
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1716:2014 and exchange — Part 1716: Application module: Layered interconnect complex template ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1717:2014 and exchange — Part 1717: Application module: Part template 3D shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1718:2014 and exchange — Part 1718: Application module: Layered interconnect simple template
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1720:2014 and exchange — Part 1720: Application module: Part template shape with parameters
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1721:2014 and exchange — Part 1721: Application module: Physical component feature
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1722:2014 and exchange — Part 1722: Application module: Part template
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1723:2014 and exchange — Part 1723: Application module: Physical node requirement to implementing component allocation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1724:2014 and exchange — Part 1724: Application module: Physical unit 2D design view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1725:2014 and exchange — Part 1725: Application module: Physical unit 3D design view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1726:2014 and exchange — Part 1726: Application module: Physical unit 2D shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1727:2014 and exchange — Part 1727: Application module: Physical unit 3D shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1728:2014 and exchange — Part 1728: Application module: Physical unit design view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1729:2014 and exchange — Part 1729: Application module: Physical unit interconnect definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1730:2014 and exchange — Part 1730: Application module: Physical unit shape with parameters
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1731:2014 and exchange — Part 1731: Application module: Constructive solid geometry 2D
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1732:2014 and exchange — Part 1732: Application module: Physical unit usage view
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1733:2014 and exchange — Part 1733: Application module: Planned characteristic
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1734:2014 and exchange — Part 1734: Application module: Pre defined datum symbol
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1735:2014 and exchange — Part 1735: Application module: Pre defined datum 2D symbol ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1736:2014 and exchange — Part 1736: Application module: Pre defined datum 3D symbol
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1737:2014 and exchange — Part 1737: Application module: Printed physical layout template
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1741:2014 and exchange — Part 1741: Application module: Sequential laminate assembly design
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1742:2014 and exchange — Part 1742: Application module: Shape composition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1744:2014 and exchange — Part 1744: Application module: Discrete shield
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1748:2014 and exchange — Part 1748: Application module: Stratum non planar shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1749:2014 and exchange — Part 1749: Application module: Styled curve
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1750:2014 and exchange — Part 1750: Application module: Text representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1751:2014 and exchange — Part 1751: Application module: Test requirement allocation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1752:2014 and exchange — Part 1752: Application module: Thermal network definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1753:2014 and exchange — Part 1753: Application module: Value with unit extension
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1755:2014 and exchange — Part 1755: Application module: Physical connectivity definition
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1760:2014 and exchange — Part 1760: Application module: Pre defined product data management specializations
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1764:2014 and exchange — Part 1764: Application module: Shape feature
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1767:2014 and exchange — Part 1767: Application module: Composite constituent shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1769:2014 and exchange — Part 1769: Application module: Fea material aspects
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1770:2014 and exchange — Part 1770: Application module: Part and zone laminate tables
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1771:2014 and exchange — Part 1771: Application module: Stock material
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1772:2014 and exchange — Part 1772: Application module: Ply orientation specification ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1773:2014 and exchange — Part 1773: Application module: Basic data representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1776:2014 and exchange — Part 1776: Application module: Extended date
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1778:2014 and exchange — Part 1778: Application module: External library
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1779:2014 and exchange — Part 1779: Application module: External representation item
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1782:2014 and exchange — Part 1782: Application module: Qualified measure
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1788:2014 and exchange — Part 1788: Application module: Explicit constraints
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1789:2014 and exchange — Part 1789: Application module: Geometric constraints
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1790:2014 and exchange — Part 1790: Application module: Parameterization and variational representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1791:2014 and exchange — Part 1791: Application module: Primitive solids
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1792:2014 and exchange — Part 1792: Application module: Sketch
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1794:2014 and exchange — Part 1794: Application module: Assembly constraints
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1795:2014 and exchange — Part 1795: Application module: Assembly feature relationship
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1796:2014 and exchange — Part 1796: Application module: Kinematic motion representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1797:2014 and exchange — Part 1797: Application module: Kinematic structure
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1798:2014 and exchange — Part 1798: Application module: Kinematic state
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1799:2014 and exchange — Part 1799: Application module: Kinematic topology
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1800:2014 and exchange — Part 1800: Application module: Support resource
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1802:2014 and exchange — Part 1802: Application module: Assembly component
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1803:2014 and exchange — Part 1803: Application module: Process plan
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1804:2014 and exchange — Part 1804: Application module: Product as individual assembly and test ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1805:2014 and exchange — Part 1805: Application module: Characterized representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1806:2014 and exchange — Part 1806: Application module: Form feature in panel
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1807:2014 and exchange — Part 1807: Application module: Part shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1808:2014 and exchange — Part 1808: Application module: Assembly shape
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1809:2014 and exchange — Part 1809: Application module: Default setting association
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1810:2014 and exchange — Part 1810: Product and manufacturing information view context
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1811:2014 and exchange — Part 1811: Application module: Product and manufacturing information with nominal 3D models
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1812:2014 and exchange — Part 1812: Application module: Product and manufacturing annotation presentation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1813:2014 and exchange — Part 1813: Application module: Parametric representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1814:2014 and exchange — Part 1814: Application module: Machining features
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1815:2014 and exchange — Part 1815: Application module: Mating strucuture
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1816:2014 and exchange — Part 1816: Application module: Model based 3D geomatrical dimensioning and tolerancing representation
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1817:2014 and exchange — Part 1817: Application module: Kinematic analysis control and result
ISO 10303-1819:2014 * Industrial automation systems and integration — Product data representation B and exchange — Part 1819: Application module: Tessellated geometry
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1820:2014 and exchange — Part 1820: Application module: Point direction model
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1821:2014 and exchange — Part 1821: Apllication module: Externally conditioned data quality criteria
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1822:2014 and exchange — Part 1822: Application module: Externally conditionned data quality inspection result
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1823:2014 and exchange — Part 1823: Application module: Product view definition reference
ISO/TS 10303- * Industrial automation systems and integration — Product data representation B 1824:2014 and exchange — Part 1824: Application module: Change management TC 188 Small craft
ISO 10239:2014 Small craft — Liquefied petroleum gas (LPG) systems B
ISO 21487:2012/Amd Small craft — Permanently installed petrol and diesel fuel tanks — XZ 1:2014 Amendment 1
ISO 25197:2012/Amd Small craft — Electrical/electronic control systems for steering, shift and XZ 1:2014 throttle — Amendment 1 TC 190 Soil quality
ISO/TS 17182:2014 * Soil quality — Determination of some selected phenols and chlorophenols — C Gas chromatographic method with mass spectrometric detection TC 195 Building construction machinery and equipment
ISO 13105-1:2014 * Building construction machinery and equipment — Machinery for concrete A surface floating and finishing — Part 1: Terms and commercial specifications
ISO 13105-2:2014 * Building construction machinery and equipment — Machinery for concrete C surface floating and finishing — Part 2: Safety requirements and verification TC 204 Intelligent transport systems
ISO 21218:2013/Amd * Intelligent transport systems — Communications access for land mobiles XZ 1:2014 (CALM) — Access technology support — Amendment 1 TC 206 Fine ceramics
ISO 17138:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — B Mechanical properties of ceramic composites at room temperature — Determination of flexural strength
ISO 18560-1:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test C method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment — Part 1: Removal of formaldehyde
ISO 20507:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — E Vocabulary TC 207 Environmental management
ISO 14046:2014 Environmental management — Water footprint — Principles, requirements E and guidelines TC 211 Geographic information/Geomatics
ISO 19101-1:2014 Geographic information — Reference model — Part 1: Fundamentals F
ISO 19154:2014 * Geographic information — Ubiquitous public access — Reference model F TC 215 Health informatics
ISO/TR 12300:2014 * Health informatics — Principles of mapping between terminological systems F
ISO/TS 17439:2014 * Health informatics — Development of terms and definitions for health C informatics glossaries
ISO/TR 19231:2014 * Health informatics — Survey of mHealth projects in low and middle income C countries (LMIC)
ISO/TR 80001-2- * Application of risk management for IT-networks incorporating medical C 6:2014 devices — Part 2-6: Application guidance — Guidance for responsibility agreements TC 219 Floor coverings
ISO 16581:2014 * Resilient and laminate floor coverings — Determination of the effect of A simulated movement of a furniture leg
ISO/PAS 18167:2014 * Textile floor coverings — Installation practices — General F
ISO 24334:2014 * Laminate floor coverings — Determination of locking strength for B mechanically assembled panels TC 229 Nanotechnologies
ISO/TS 12901-1:2012 Nanotechnologies — Occupational risk management applied to engineered F nanomaterials — Part 1: Principles and approaches TMBG Technical Management Board - groups
IWA 13:2014 * Multiple resource evaluation guideline B
ISO/IEC Guide * Guide for addressing accessibility in standards F 71:2014 CASCO Committee on conformity assessment
ISO/IEC TS 17021- * Conformity assessment — Requirements for bodies providing audit and A 6:2014 certification of management systems — Part 6: Competence requirements for auditing and certification of business continuity management systems JTC 1 Information technology
ISO/IEC 30101:2014 * Information technology — Sensor networks: Sensor network and its H interfaces for smart grid system
ISO/IEC 30128:2014 * Information technology — Sensor networks — Generic Sensor Network F Application Interface
ISO/IEC 8825-7:2014 * Information technology — ASN.1 encoding rules — Part 7: Specification of D Octet Encoding Rules (OER)
ISO/IEC 13157- * Information technology — Telecommunications and information exchange C 1:2014 between systems — NFC Security — Part 1: NFC-SEC NFCIP-1 security services and protocol
ISO/IEC 24744:2014 * Software engineering — Metamodel for development methodologies H
ISO/IEC 7811-8:2014 * Identification cards — Recording technique — Part 8: Magnetic stripe — B Coercivity of 51,7 kA/m (650 Oe)
ISO/IEC 18013- * Information technology — Personal identification — ISO-compliant driving XZ 3:2009/Amd 2:2014 licence — Part 3: Access control, authentication and integrity validation — Amendment 2: Extended Access Control v1
ISO/IEC TR * Information technology — Programming languages, their environments and G 14369:2014 system software interfaces — Guidelines for the preparation of Language- Independent Service Specifications (LISS)
ISO/IEC 10118- * Information technology — Security techniques — Hash-functions — Part 4: XZ 4:1998/Amd 1:2014 Hash-functions using modular arithmetic — Amendment 1: Object identifiers
ISO/IEC 14496- * Information technology — Coding of audio-visual objects — Part 4: XZ 4:2004/Amd 42:2014 Conformance testing — Amendment 42: Conformance testing of Multi- Resolution Frame Compatible Stereo Coding extension of AVC
ISO/IEC 14496- * Information technology — Coding of audio-visual objects — Part 5: XZ 5:2001/Amd 34:2014 Reference software — Amendment 34: Reference software of the multi- resolution frame compatible stereo coding of AVC
ISO/IEC 23000- * Information technology — Multimedia application format (MPEG-A) — Part XZ 11:2009/Amd 3:2014 11: Stereoscopic video application format — Amendment 3: Support movie fragment for Stereoscopic Video AF
ISO/IEC 23002- * Information technology — MPEG video technologies — Part 4: Video tool H 4:2014/Amd 1:2014 library — Amendment 1: Graphics tool library (GTL) for the reconfigurable multimedia coding (RMC) framework
ISO/IEC 15459- * Information technology — Automatic identification and data capture B 1:2014 techniques — Unique identification — Part 1: Individual transport units
ISO/IEC 15459- * Information technology — Automatic identification and data capture B 3:2014 techniques — Unique identification — Part 3: Common rules
ISO/IEC 15459- * Information technology — Automatic identification and data capture B 4:2014 techniques — Unique identification — Part 4: Individual products and product packages
ISO/IEC 15459- * Information technology — Automatic identification and data capture B 5:2014 techniques — Unique identification — Part 5: Individual returnable transport items (RTIs)
ISO/IEC 15459- * Information technology — Automatic identification and data capture B 6:2014 techniques — Unique identification — Part 6: Groupings
ISO/IEC TS 30135- * Information technology — Digital publishing — EPUB3 — Part 1: EPUB3 D 1:2014 Overview
ISO/IEC TS 30135- * Information technology — Digital publishing — EPUB3 — Part 2: G 2:2014 Publications
ISO/IEC TS 30135- * Information technology — Digital publishing — EPUB3 — Part 3: Content F 3:2014 Documents
ISO/IEC TS 30135- * Information technology — Digital publishing — EPUB3 — Part 4: Open D 4:2014 Container Format
ISO/IEC TS 30135- * Information technology — Digital publishing — EPUB3 — Part 5: Media E 5:2014 Overlay
ISO/IEC TS 30135- * Information technology — Digital publishing — EPUB3 — Part 6: EPUB C 6:2014 Canonical Fragment Identifier
ISO/IEC TS 30135- * Information technology — Digital publishing — EPUB3 — Part 7: EPUB3 B 7:2014 Fixed-Layout Documents
ISO/IEC 19788- * Information technology — Learning, education and training — Metadata for C 4:2014 learning resources — Part 4: Technical elements Standards confirmed
The following International Standards are confimred for a five year period: TC 1 Screw threads
ISO 725:2009
ISO 1501:2009
ISO 5408:2009
ISO 5864:1993 (reconfirmed) TC 2 Fasteners
ISO 6157-1:1988 (reconfirmed) TC 6 Paper, board and pulps
ISO 5630-6:2009
ISO 15754:2009
TC 8 Ships and marine technology
ISO 15371:2009
ISO 8729-2:2009
ISO 19019:2005 (reconfirmed)
ISO 19379:2003 (reconfirmed) TC 20 Aircraft and space vehicles
ISO 1151-1:1988 (reconfirmed)
ISO 1151-2:1985 (reconfirmed)
ISO 1151-3:1989 (reconfirmed)
ISO 1151-5:1987 (reconfirmed)
ISO 1151-6:1982 (reconfirmed)
ISO 1151-8:1992 (reconfirmed)
ISO 1151-9:1993 (reconfirmed)
ISO 5843-2:1990 (reconfirmed)
ISO 5843-3:1997 (reconfirmed)
ISO 5843-4:1990 (reconfirmed)
ISO 5843-5:1990 (reconfirmed)
ISO 5843-6:1985 (reconfirmed) ISO 5843-9:1988 (reconfirmed)
ISO 5843- (reconfirmed) 10:1988
ISO 102:1990 (reconfirmed)
ISO 451:1976 (reconfirmed)
ISO 485:1973 (reconfirmed)
ISO 1034:1973 (reconfirmed)
ISO 1465:1989 (reconfirmed)
ISO 1749:1973 (reconfirmed)
ISO 2563:2009
ISO 3174:1994 (reconfirmed)
ISO 6773:1994 (reconfirmed)
ISO 7258:1984 (reconfirmed)
ISO 7313:1984 (reconfirmed)
ISO 7315:1988 (reconfirmed)
ISO 7661:1984 (reconfirmed)
ISO 8153-1:2009
ISO 8479:1986 (reconfirmed)
ISO 8625-1:1993 (reconfirmed)
ISO 8775:1988 (reconfirmed)
ISO 8829-1:2009
ISO 8829-2:2006 (reconfirmed)
ISO 9528:1994 (reconfirmed)
ISO 9634:1994 (reconfirmed)
ISO 9679:2006 (reconfirmed)
ISO 9939:1994 (reconfirmed)
ISO 11218:1993 (reconfirmed)
ISO 12319:2006 (reconfirmed)
ISO 22089:2009
ISO 23933:2006 (reconfirmed)
ISO 23935:2006 (reconfirmed) TC 22 Road vehicles
ISO 4130:1978 (reconfirmed) ISO 7656:1993 (reconfirmed)
ISO 7736:1984 (reconfirmed)
ISO 9158:1988 (reconfirmed)
ISO 9159:1988 (reconfirmed)
ISO 9367-1:1989 (reconfirmed)
ISO 9367-2:1994 (reconfirmed)
ISO 10486:1992 (reconfirmed)
ISO 10487- (reconfirmed) 1:1992
ISO 22896:2006 (reconfirmed)
ISO 2697:1999 (reconfirmed)
ISO 4010:1998 (reconfirmed)
ISO 4093:1999 (reconfirmed)
ISO 7310:1993 (reconfirmed)
ISO 7311:1993 (reconfirmed)
ISO 7654:1998 (reconfirmed)
ISO 7876-2:1991 (reconfirmed)
ISO 7876-3:1993 (reconfirmed)
ISO 8984-1:1993 (reconfirmed)
ISO 8984-2:1993 (reconfirmed)
ISO 14681:1998 (reconfirmed)
ISO 19438:2003 (reconfirmed)
ISO/TS 19713- 1:2010
ISO/TS 19713- 2:2010
ISO 14512:1999 (reconfirmed)
ISO 15037- (reconfirmed) 1:2006
ISO 16234:2006 (reconfirmed)
ISO/TS (reconfirmed) 15827:2007
ISO 12097- (reconfirmed) 1:2002
ISO 13215- (reconfirmed) 1:2006 TC 23 Tractors and machinery for agriculture and forestry
ISO 4254-6:2009
ISO/TS 11356:2011
ISO 22369- (reconfirmed) 1:2006
ISO 22369- 2:2010
ISO 22763:2006 (reconfirmed)
ISO 7113:1999 (reconfirmed)
ISO 8380:1993 (reconfirmed)
ISO 13772:2009
TC 25 Cast irons and pig irons
ISO 185:2005
ISO 2892:2007
ISO 16112:2006
ISO 17804:2005
ISO 21988:2006
TC 34 Food products
ISO 21415- (reconfirmed) 1:2006
ISO 6673:2003 (reconfirmed) TC 51 Pallets for unit load method of materials handling
ISO 6780:2003 (reconfirmed) TC 59 Buildings and civil engineering works
ISO 9699:1994 (reconfirmed)
ISO 7389:2002 (reconfirmed)
ISO 7390:2002 (reconfirmed)
ISO 8339:2005 (reconfirmed)
ISO 8340:2005 (reconfirmed)
ISO 9047:2001 (reconfirmed)
ISO 10563:2005 (reconfirmed) ISO 10590:2005 (reconfirmed)
ISO 11431:2002 (reconfirmed)
ISO 11600:2002 (reconfirmed) TC 60 Gears
ISO/TR 10064- 1:1992 TC 61 Plastics
ISO 9773:1998 (reconfirmed) TC 63 Glass containers
ISO 7458:2004 (reconfirmed)
ISO 8106:2004 (reconfirmed) TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS 29001:2010 TC 70 Internal combustion engines
ISO/TS (reconfirmed) 23556:2007 TC 83 Sports and other recreational facilities and equipment
ISO 7152:1997 (reconfirmed)
ISO 20957- (reconfirmed) 8:2005 TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 13465:2009
TC 86 Refrigeration and air-conditioning
ISO 11650:1999 (reconfirmed)
ISO 17584:2005 (reconfirmed) TC 102 Iron ore and direct reduced iron
ISO 4691:2009
ISO 9682-1:2009
ISO 9683-2:2009 ISO 11533:2009
TC 108 Mechanical vibration, shock and condition monitoring
ISO 5347- (reconfirmed) 12:1993
ISO 5347- (reconfirmed) 13:1993
ISO 5347- (reconfirmed) 15:1993
ISO 5347- (reconfirmed) 16:1993
ISO 5347- (reconfirmed) 18:1993
ISO 5347- (reconfirmed) 19:1993
ISO 5348:1998 (reconfirmed)
ISO 8042:1988 (reconfirmed)
ISO 16063- (reconfirmed) 1:1998
ISO 16063- 31:2009 TC 131 Fluid power systems
ISO 16030:2001 (reconfirmed) TC 150 Implants for surgery
ISO 14242- 3:2009 TC 162 Doors and windows
ISO 8271:2005 (reconfirmed) TC 163 Thermal performance and energy use in the built environment
ISO 9288:1989 (reconfirmed) TC 165 Timber structures
ISO 8375:2009
TC 180 Solar energy
ISO 9488:1999
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 10378:2005 (reconfirmed) ISO 13658:2000 (reconfirmed) TC 202 Microbeam analysis
ISO/TS 24597:2011 TC 204 Intelligent transport systems
ISO/TS 13140- 1:2011
ISO/TS 13143- 1:2011
ISO/TS 13143- 2:2011
ISO 14816:2005 (reconfirmed)
ISO 14827- (reconfirmed) 1:2005
ISO 14827- (reconfirmed) 2:2005
ISO 22178:2009
ISO 22951:2009
ISO 24103:2009
TC 210 Quality management and corresponding general aspects for medical devices
ISO 594-1:1986 (reconfirmed)
ISO 594-2:1998 (reconfirmed) TC 256 Pigments, dyestuffs and extenders
ISO 473:1982 (reconfirmed)
ISO 787-1:1982 (reconfirmed)
ISO 787-2:1981 (reconfirmed)
ISO 787-4:1981 (reconfirmed)
ISO 787-9:1981 (reconfirmed)
ISO 787-10:1993 (reconfirmed)
ISO 787-11:1981 (reconfirmed)
ISO 787-19:1974 (reconfirmed)
ISO 787-25:1993 (reconfirmed) Standards withdrawn Period from 01 November to 30 November 2014 TC 17 Steel
ISO 683-10:1987 (replaced by ISO 683-5:2014)
ISO 683-11:2012 (replaced by ISO 683-3:2014) TC 37 Terminology and other language and content resources
ISO 639-6:2009 (replaced by ) TC 61 Plastics
ISO 6402-1:2002 (replaced by ISO 19065-1:2014) TC 182 Geotechnics
ISO/TS 17892- (replaced by ISO 17892-1:2014) 1:2004
ISO/TS 17892- (replaced by ISO 17892-2:2014) 2:2004 TC 211 Geographic information/Geomatics
ISO 19101:2002 (replaced by ISO 19101-1:2014) TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/TR 18112:2006 (replaced by ) Meeting calendar
(update at 01 November 2014)
Meetings called for the month of October are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional December 2014
1-4 Copenhagen TC 98 Bases for design of structures (Denmark)
1-5 Dublin (Ireland) TC 260 Human resource management
3-5 Tokyo (Japan) TC 232 Learning services outside formal education
3-5 Paris (France) TC 269 Railway applications
4-5 Fukuoka (Japan) TC 197 Hydrogen technologies
5 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining 8-10 London (United TC 147/SC 3 Water quality/Radioactivity measurements Kingdom)
9-12 Madrid (Spain) PC 273 Customer contact centres
10 Virtual (Unknown) * TC 22/SC 35 Road vehicles/Lighting and visibility
17 Frankfurt TC 291 Domestic gas cooking appliances (Germany)
1-4 Copenhagen TC 98/SC 2 Bases for design of structures/Reliability of structures (Denmark)
1-4 Copenhagen TC 98/SC 3 Bases for design of structures/Loads, forces and other (Denmark) actions January 2015
12-16 Weinheim TC 69/SC 4 Applications of statistical methods/Applications of (Germany) statistical methods in process management
12-16 Dublin (Ireland) TC 121/SC 3 Anaesthetic and respiratory equipment/Lung ventilators and related equipment
19-20 Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics
19-23 Copenhagen * JTC 1/SC 35 Information technology/User interfaces (Denmark)
19-23 Berlin (Germany) PC 248 Sustainability criteria for bioenergy
22-23 Cape Town (South TC 44/SC 8 Welding and allied processes/Equipment for gas Africa) welding, cutting and allied processes
25-29 Foshan (China) TC 107 Metallic and other inorganic coatings
25-29 Foshan (China) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29 Foshan (China) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
26-27 Paris (France) TC 166 Ceramic ware, glassware and glass ceramic ware in contact with food
28 Berlin (Germany) TC 207/SC 3 Environmental management/Environmental labelling
29 West TC 261 Additive manufacturing Conshohocken (Philadelphia) (USA) February 2015
2-3 Paris (France) TC 44/SC 3 Welding and allied processes/Welding consumables
2-5 Beijing (China) TC 257 Evaluation of energy savings
3-13 London (United TC 213 Dimensional and geometrical product specifications and Kingdom) verification 9-13 Fairfax (USA) TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders
10-12 London (United * TC 8/SC 8 Ships and marine technology/Ship design Kingdom)
11 Geneva * CSC/SPC Council/Strategy and Policy Committee (CSC/SPC) (Switzerland)
11 St. Petersburg, TC 115 Pumps Florida (USA)
12-13 Geneva President's President's committee (Switzerland) committee
22-23 Miami (USA) TMB Technical Management Board
March 2015
3 Virtual (Unknown) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
9 Caparica (Portugal) * TC 48 Laboratory equipment
9-13 Paris (France) TC 108 Mechanical vibration, shock and condition monitoring
9-13 London (United TC 110/SC 4 Industrial trucks/Rough-terrain trucks Kingdom)
9-13 Morioka (Japan) TC 292 Security (official starting date=2015-01-01)
12 West TC 221 Geosynthetics Conshohocken (Philadelphia) (USA)
16 Geneva President's President's committee (Switzerland) committee
16-18 Geneva COUNCIL Council (Switzerland)
23-24 Chengdu (China) * TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets
23-27 Vienna (Austria) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
23-27 Paris (France) PC 278 Anti-bribery management systems
25-26 Nara (Japan) * TC 184 Automation systems and integration
Rio de Janeiro ** PC 287 Chain of custody of wood and wood-based products (Brazil) March-April 2015
31-2 Montreal (Canada) * TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment 1st Quarter 2015 (United Kingdom) ** PC 284 Management system for private security operations - Requirements with guidance
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
April 2015
10 London (United * TC 92/SC 1 Fire safety/Fire initiation and growth Kingdom)
13-14 Lyon (France) TC 117 Fans
13-17 Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and appliances
13-17 (Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
19-24 Vico Equense * TC 184/SC 4 Automation systems and integration/Industrial data (Italy)
19-24 Hangzhou (China) * TC 204 Intelligent transport systems
20-22 Zurich * TC 126 Tobacco and tobacco products (Switzerland)
20-22 Zurich * TC 126/SC 1 Tobacco and tobacco products/Physical and (Switzerland) dimensional tests
20-22 Zurich * TC 126/SC 2 Tobacco and tobacco products/Leaf tobacco (Switzerland)
20-24 San Francisco * TC 215 Health informatics (USA)
21 Beijing (China) ** TC 274 Light and lighting
21-22 Düsseldorf TC 44/SC 10 Welding and allied processes/Unification of (Germany) requirements in the field of metal welding
21-22 (Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
22-24 General Roca * TC 34/SC 12 Food products/Sensory analysis (Argentina)
23 Düsseldorf * TC 44/SC 11 Welding and allied processes/Qualification requirements (Germany) for welding and allied processes personnel
24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board
25 Atlanta (USA) ** TC 6 Paper, board and pulps
(France) ** TC 29 Small tools
(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items (USA) ** TC 34/SC 15 Food products/Coffee
April-May 2015
15-16 (United Kingdom) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
27-1 London (United * TC 30 Measurement of fluid flow in closed conduits Kingdom) May 2015
4-7 Toronto (Canada) * TC 68 Financial services
4-8 Kuching (Malaysia) ** JTC 1/SC 27 Information technology/IT Security techniques
4-8 (Unknown) ** TC 36 Cinematography
8-15 Tokyo (Japan) ** TC 10 Technical product documentation
11-12 Kuching (Malaysia) * JTC 1/SC 27 Information technology/IT Security techniques
11-15 Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications
11-16 Bologna (Italy) ** TC 130 Graphic technology
12-15 London (United ** TC 156 Corrosion of metals and alloys Kingdom)
13 Paris (France) ** TC 87 Cork
18-22 (Brazil) ** JTC 1/SC 40 Information technology/IT Service Management and IT Governance
18-22 London (United ** TC 4 Rolling bearings Kingdom)
18-22 Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
18-22 Luzern * TC 114 Horology (Switzerland)
22 Los Angeles (USA) TC 119 Powder metallurgy
22 Cape Town (South * TC 228 Tourism and related services Africa)
24-29 Tokyo (Japan) * TC 113 Hydrometry
25-29 Madrid (Spain) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
26-29 Buenos Aires * TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological (Argentina) protection/Nuclear fuel cycle
27 London (United ** TC 67/SC 5 Materials, equipment and offshore structures for Kingdom) petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe Glasgow, Scotland ** JTC 1/SC 32 Information technology/Data management and (United Kingdom) interchange
(USA) ** PC 272 Forensic sciences
8-15 Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions
8-15 Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Mechanical engineering documentation
8-15 Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation
Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods
Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures
Tokyo (Japan) ** TC 113/SC 5 Hydrometry/Instruments, equipment and data management
Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport
Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water
London (United ** TC 131/SC 6 Fluid power systems/Contamination control Kingdom)
Vancouver ** TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation (Canada)
Vancouver ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water (Canada) re-use systems June 2015
1-5 Sapporo (Japan) ** TC 42 Photography
1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwater acoustics
1-6 Philadelphia (USA) ** TC 147 Water quality
3-5 (Japan) ** TC 145 Graphical symbols
5-6 San Antonio (USA) ** TC 85/SC 6 Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
8-12 Houston (USA) * TC 35 Paints and varnishes
8-12 Berlin (Germany) ** TC 121 Anaesthetic and respiratory equipment
9-12 Pretoria (South ** REMCO Committee on reference materials Africa)
9-12 London (United * TC 289 Brand evaluation Kingdom)
10-11 (France) ** TC 17/SC 9 Steel/Tinplate and blackplate
11-12 Paris (France) * TC 24/SC 4 Particle characterization including sieving/Particle characterization
15-19 Vancouver ** TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles (Canada)
17-18 Geneva * TMB Technical Management Board (Switzerland)
18-19 Stuttgart * TC 184/SC 2 Automation systems and integration/Robots and robotic (Germany) devices
21-26 Matsue (Japan) ** TC 37 Terminology and other language and content resources
22-25 Avignon (France) * TC 54 Essential oils
22-26 (Netherlands) ** TC 34/SC 9 Food products/Microbiology
22-26 (China) ** TC 69 Applications of statistical methods
22-26 Göteborg * TC 188 Small craft (Sweden)
30 Virtual (Unknown) * President's President's committee committee
Matsue (Japan) ** JTC 1/SC 28 Information technology/Office equipment
Montreal (Canada) ** JTC 1/SC 31 Information technology/Automatic identification and data capture techniques
(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training
Zurich ** TC 17/SC 17 Steel/Steel wire rod and wire products (Switzerland)
(Europe) ** TC 34/SC 18 Food products/Cocoa
Beijing (China) ** TC 46 Information and documentation
Mexico City ** TC 242 Energy Management (Mexico)
(China) ** TC 249 Traditional chinese medicine
(Unknown) ** TC 268/SC 1 Sustainable development in communities/Smart community infrastructures June-July 2015
30-3 Milan (Italy) * TC 193 Natural gas
30-3 Milan (Italy) * TC 193/SC 1 Natural gas/Analysis of natural gas
30-3 Milan (Italy) * TC 193/SC 3 Natural gas/Upstream area 2nd Quarter 2015
(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Protective clothing
Istanbul (Turkey) ** TC 120 Leather
(China) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments 1st Semester 2015
(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres July 2015
1-7 Berlin (Germany) * TC 91 Surface active agents
6-10 Helsinki (Finland) * TC 44 Welding and allied processes
(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps August 2015
26-28 Jeju (Korea, * TC 206 Fine ceramics Republic of) August-September 2015
31-4 Hokaido (Japan) * JTC 1/SC 35 Information technology/User interfaces September 2015
1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment
4-12 New Delhi (India) ** TC 207 Environmental management
7-11 Paris (France) * TC 153 Valves
7-14 Sydney (Australia) ** TC 96 Cranes
13 Seoul (Korea, * President's President's committee Republic of) committee
13-17 Lahaina, Hawaii ** TC 127 Earth-moving machinery (USA)
14 Seoul (Korea, * COUNCIL Council Republic of)
14-15 Hawaii (USA) * JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
14-18 Milan (Italy) * TC 43 Acoustics
14-18 Berlin (Germany) ** TC 150 Implants for surgery
14-18 (Canada) ** TC 205 Building environment design
14-18 Berlin (Germany) * TC 256 Pigments, dyestuffs and extenders
14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification
15 Seoul (Korea, * DEVCO Committee on developing country matters Republic of)
15-16 Seoul (Korea, * TMB Technical Management Board Republic of) 16-18 Seoul (Korea, * GA General Assembly Republic of)
17 Seoul (Korea, * CSC/FIN Council/Council Standing Committee on Finance Republic of) (CSC/FIN)
17-18 Moscow (Russian ** TC 197 Hydrogen technologies Federation)
21-24 Delft (Netherlands) ** TC 146/SC 1 Air quality/Stationary source emissions
21-25 Delft (Netherlands) ** TC 146/SC 6 Air quality/Indoor air
28-29 Basel (Switzerland) ** TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
(Europe) ** TC 22/SC 19 Road vehicles/Wheels
Vienna (Austria) ** TC 33 Refractories
14-18 Milan (Italy) * TC 43/SC 1 Acoustics/Noise
14-18 Milan (Italy) * TC 43/SC 2 Acoustics/Building acoustics
(Europe) ** TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
(Japan) ** TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
Johor Bahru ** TC 165 Timber structures (Malaysia)
Seattle (USA) ** TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry
(Netherlands) ** TC 258 Project, programme and portfolio management
September-October 2015
28-2 Edmonton * TC 229 Nanotechnologies (Canada) October 2015
1 Rome (Italy) * TC 39/SC 4 Machine tools/Woodworking machines
5-9 Dublin (Ireland) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
8 Virtual (Unknown) * President's President's committee committee
8-9 Sao Paulo (Brazil) * TC 58/SC 2 Gas cylinders/Cylinder fittings
9 Copenhagen * TC 254 Safety of amusement rides and amusement devices (Denmark)
12-16 Paris (France) * TC 34/SC 17 Food products/Management systems for food safety
12-16 Turin (Italy) ** TC 70 Internal combustion engines
12-16 Beijing (China) * TC 181 Safety of toys 12-17 Beijing (China) * TC 20 Aircraft and space vehicles
12-17 Beijing (China) * TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems
12-17 Beijing (China) * TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology
15-17 Seattle (USA) * TC 201 Surface chemical analysis
18-23 Vichy (France) * TC 45 Rubber and rubber products
18-23 Vichy (France) * TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
19-21 Jeju (Korea, * TC 281 Fine Bubble Technology Republic of)
19-23 (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
19-23 Gaithersburg * TC 92 Fire safety (USA)
19-23 Gaithersburg * TC 92/SC 1 Fire safety/Fire initiation and growth (USA)
20-23 Oslo (Norway) ** TC 58/SC 3 Gas cylinders/Cylinder design
22-23 London (United * TC 79/SC 2 Light metals and their alloys/Organic and anodic Kingdom) oxidation coatings on aluminium
22-23 Berlin (Germany) * TC 209 Cleanrooms and associated controlled environments
26-29 Pretoria (South ** TC 264 Fireworks Africa)
26-30 New Delhi (India) * JTC 1/SC 27 Information technology/IT Security techniques
26-30 Porto Alegre * TC 23/SC 17 Tractors and machinery for agriculture and (Brazil) forestry/Manually portable forest machinery
28-30 Tsukuba (Japan) ** TC 202 Microbeam analysis
29-30 Tampa, Florida * TC 17/SC 12 Steel/Continuous mill flat rolled products (USA)
(Unknown) ** TC 2 Fasteners
Madrid (Spain) ** TC 10/SC 8 Technical product documentation/Construction documentation
(Netherlands) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals
(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
Nairobi (Kenya) ** TC 38 Textiles
Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns Nairobi (Kenya) ** TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics
Madrid (Spain) ** TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in building construction
Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment
Washington, D.C ** TC 79 Light metals and their alloys (USA)
Sao Paulo (Brazil) ** TC 135/SC 9 Non-destructive testing/Acoustic emission testing
(Turkey) ** TC 180 Solar energy
Santiago (Chile) ** TC 195 Building construction machinery and equipment
(Germany) ** TC 244 Industrial furnaces and associated processing equipment
(China) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems November 2015
2-6 (Switzerland) ** TC 215 Health informatics
2-6 Beijing (China) * TC 282 Water re-use
3 Berlin (Germany) * TC 83 Sports and other recreational facilities and equipment
9-12 (Spain) ** TC 189 Ceramic tile
9-13 Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting
11 Nottingham (United * TC 60 Gears Kingdom)
11-13 (Malaysia) ** TC 123 Plain bearings
12-13 Kuala Lumpur ** TC 227 Springs (Malaysia)
16 (USA) ** PC 252 Natural gas fuelling stations for vehicles
(China) ** JTC 1 Information technology
Pretoria (South ** TC 212 Clinical laboratory testing and in vitro diagnostic test Africa) systems 4th Quarter 2015
(Sweden) ** TC 17/SC 1 Steel/Methods of determination of chemical composition
Dayton, Ohio ** TC 159/SC 3 Ergonomics/Anthropometry and biomechanics (USA)
Tel Aviv (Israel) ** TC 282 Water re-use
2nd Semester 2015 (USA) ** TC 171 Document management applications
(France) ** TC 172/SC 1 Optics and photonics/Fundamental standards
(USA) ** TC 184/SC 4 Automation systems and integration/Industrial data
Month unknown 2015
Brussels (Belgium) ** TC 23 Tractors and machinery for agriculture and forestry
(USA) ** TC 27 Solid mineral fuels
(USA) ** TC 41 Pulleys and belts (including veebelts)
Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(United Kingdom) ** TC 164 Mechanical testing of metals
(Austria) ** TC 190 Soil quality
Vienna (Austria) ** TC 190/SC 2 Soil quality/Sampling
January 2016
(China) ** TC 120 Leather
February 2016
(USA) ** TC 213 Dimensional and geometrical product specifications and verification March 2016
17-18 Geneva * COUNCIL Council (Switzerland) April 2016
11-15 Sydney (Australia) ** TC 178 Lifts, escalators and moving walks
Seoul (Korea, ** TC 161 Control and protective devices for gas and/or oil burners Republic of) and appliances May 2016
(Brazil) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India) ** TC 85 Nuclear energy, nuclear technologies, and radiological protection
(USA) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems June 2016
(Germany) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training 1st Semester 2016
(China) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis September 2016
19 Beijing (China) * COUNCIL Council
21-23 Beijing (China) * GA General Assembly
Vienna (Austria) ** JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
Paris (France) ** TC 17 Steel
Sao Paulo (Brazil) ** TC 209 Cleanrooms and associated controlled environments
Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification
Beijing (China) ** TC 256 Pigments, dyestuffs and extenders
3rd Quarter 2016
(USA) ** TC 289 Brand evaluation
October 2016
2-7 Rio de Janeiro * TC 59 Buildings and civil engineering works (Brazil)
20-21 London (United * TC 58 Gas cylinders Kingdom)
(Korea, Republic ** TC 201 Surface chemical analysis of)
(Israel) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems November 2016
(Norway) ** JTC 1 Information technology
4th Quarter 2016
Delft (Netherlands) ** TC 28 Petroleum products and lubricants
Delft (Netherlands) ** TC 28/SC 5 Petroleum products and lubricants/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels Delft (Netherlands) ** TC 28/SC 7 Petroleum products and lubricants/Liquid Biofuels
Month unknown 2016
(Korea, Republic ** JTC 1/SC 23 Information technology/Digitally Recorded Media for of) Information Interchange and Storage
(Russian ** REMCO Committee on reference materials Federation)
(Denmark) ** TC 37 Terminology and other language and content resources
(South Africa) ** TC 44 Welding and allied processes
(Malaysia) ** TC 45 Rubber and rubber products
Wellington (New ** TC 46 Information and documentation Zealand)
Wellington (New ** TC 46/SC 11 Information and documentation/Archives/records Zealand) management
(Sweden) ** TC 102 Iron ore and direct reduced iron
(Japan) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates
June 2017
(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training September 2017
London (United ** JTC 1/SC 22 Information technology/Programming languages, their Kingdom) environments and system software interfaces
New Delhi (India) ** TC 178 Lifts, escalators and moving walks
3rd Quarter 2017
Vienna (Austria) ** TC 289 Brand evaluation
June 2018
(Korea, Republic ** JTC 1/SC 36 Information technology/Information technology for of) learning, education and training