Standards published
New International Standards published between 01 May and 31 May 2015
* Available in English only
** French version of standard previously published in English only
Price group
JPC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-1:2015 Part 1: Energy efficiency C
ISO/IEC Energy efficiency and renewable energy sources — Common international terminology — 13273-2:2015 Part 2: Renewable energy sources B
REMCO Committee on reference materials ISO Guide Reference materials — Good practice in using reference materials 33:2015 E
TC 6 Paper, board and p ulps ISO 2144:2015 Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C A
ISO 5636- * Paper and board — Determination of air permeance (medium range) — Part 6: Oken method 6:2015 C
TC 8 Ships and marine technology
ISO * Ships and marine technology — Offshore wind energy — Port and marine operations 29400:2015 H
TC 20 Aircraft and space vehicles
ISO * Space systems — Space based services requirements for centimetre class positioning 18197:2015 E
TC 22 Road vehicles
ISO 15118- * Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link 3:2015 layer requirements G
ISO 18541- Road vehicles — Standardized access to automotive repair and maintenance information 1:2014 (RMI) — Part 1: General information and use case definition F
ISO 18541- Road vehicles — Standardized access to automotive repair and maintenance information 2:2014 (RMI) — Part 2: Technical requirements E
ISO 18541- Road vehicles — Standardized access to automotive repair and maintenance information 3:2014 (RMI) — Part 3: Functional user interface requirements C
ISO 17447- * Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: 1:2015 Basic characteristics and dimensions for metal-sheath-type glow-plugs C
ISO 17447- * Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: 2:2015 Basic characteristics and dimensions for ceramic-sheath-type glow-plugs B
ISO 17447- * Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: 3:2015 Tests and requirements A
TC 28 Petroleum products and related products of synthetic or biological origin ISO Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME) 16861:2015 A
TC 29 Small tools ISO 9138:2015 Abrasive grains — Sampling and splitting A
ISO 2725- Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sock- 1:2015 ets B
ISO 2725- Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated 2:2015 sockets ("impact") B
ISO 2725- Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated 3:2015 sockets ("non-impact") A
ISO 7738:2015 Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads A
TC 33 Refractories ISO Refractory products — Determination of thermal expansion 16835:2014 F
ISO * Determination of sulfur in refractory products and raw materials by gravimetric, photometric 22016:2015 and titrimetric methods C
TC 34 Food products ISO 6647- Rice — Determination of amylose content — Part 1: Reference method 1:2015 B
ISO 6647- Rice — Determination of amylose content — Part 2: Routine methods 2:2015 B
ISO 16649- Microbiology of the food chain — Horizontal method for the enumeration of beta- 3:2015 glucuronidase-positive Escherichia coli — Part 3: Detection and most probable number tech- B nique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
ISO 12228- Determination of individual and total sterols contents — Gas chromatographic method — Part 1:2014 1: Animal and vegetable fats and oils D
ISO/TR Molecular biomarker analysis — SSR analysis of maize 17623:2015 A
TC 35 Paints and varnishes ISO 3233- Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3:2015 3: Determination by calculation from the non-volatile-matter content determined in accordance C with ISO 3251, the density of the coating material and the density of the solvent in the coating material TC 38 Textiles ISO 1136:2015 Wool — Determination of mean diameter of fibres — Air permeability method C
ISO * Textiles — Synthetic filament yarns — Determination of shrinkage in dry-hot air (after treat- 18067:2015 ment) B
TC 39 Machine tools
ISO 230- * Test code for machine tools — Part 7: Geometric accuracy of axes of rotation 7:2015 G
ISO Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy 14137:2015 D
TC 43 Acoustics ISO 1683:2015 Acoustics — Preferred reference values for acoustical and vibratory levels A
ISO 362- Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: 1:2015 M and N categories G
ISO 9295:2015 Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment C
ISO 17534- Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements 1:2015 and quality assurance D
TC 44 Welding and allied processes ISO/TR Welding and allied processes — Guidelines for measurement of welding energies 18491:2015 B
TC 45 Rubber and rubber products ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids D
ISO * Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content by Micro 19051:2015 Dumas combustion method B
ISO 2005:2014 Rubber latex, natural, concentrate — Determination of sludge content A
ISO 5794- Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation proce- 2:2014 dures in styrene-butadiene rubber A
TC 46 Information and documentation
ISO * Information and documentation — Open Systems Interconnection — Interlibrary Loan Appli- 10160:2015 cation Service Definition G
ISO * Information and documentation — International standard link identifier (ISLI) 17316:2015 B
TC 54 Essentia l oils
ISO * Essential oils — Determination of peroxide value 18321:2015 A
TC 58 Gas cylinders ISO Gas cylinders — Fitting of valves to gas cylinders — Amendment 1 13341:2010/A XZ md 1:2015 TC 59 Buildi ngs and civil engineering works
ISO 12006- * Building construction — Organization of information about construction works — Part 2: 2:2015 Framework for classification D
TC 61 Plastics ISO 16620- Plastics — Biobased content — Part 2: Determination of biobased carbon content 2:2015 D
ISO 16620- Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content 3:2015 B
TC 67 Materials, equipment and offshore s tructures for petroleum, petrochemical and natural gas industries
ISO 15551- * Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric 1:2015 submersible pump systems for artificial lift H
ISO Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells 11960:2014 H
ISO 19901- Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3:2014 3: Topsides structure H
TC 71 Concrete, reinforced concrete and pre -stressed concrete
ISO 1920- * Testing of concrete — Part 12: Determination of the carbonation resistance of concrete — 12:2015 Accelerated carbonation method B
ISO * Seismic assessment and retrofit of concrete structures 16711:2015 C
TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO 18589- Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection 2:2015 of the sampling strategy, sampling and pre-treatment of samples D
ISO 18589- Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma- 3:2015 emitting radionuclides using gamma-ray spectrometry D
TC 87 Cork ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging A
TC 91 Surf ace active agents
ISO * Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from 17280:2015 epoxyethane by gas chromatography B
TC 94 Personal safety -- Protective clothing and equipment ISO 16900- Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement 8:2015 of RPD air flow rates of assisted filtering RPD C
ISO/TS 16976- Respiratory protective devices — Human factors — Part 2: Anthropometrics 2:2015 D
TC 96 Cranes ISO 9942- Cranes — Information labels — Part 1: General 1:2015 A
ISO Cranes — General design — Limit states and proof of competence of forged steel hooks 17440:2014 G
TC 106 Dentistry ISO/TS Dentistry — Testing of adhesion to tooth structure 11405:2015 B
TC 108 Mechanical vibration, shock and condition monitoring ISO Mechanical vibration — Evaluation of measurement results from dynamic tests and investiga- 18649:2004 tions on bridges D
ISO 20283- Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration 3:2006 measurement of shipboard equipment D
ISO 14835- Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral 1:2005 vascular function — Part 1: Measurement and evaluation of finger skin temperature B
ISO 14835- Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral 2:2005 vascular function — Part 2: Measurement and evaluation of finger systolic blood pressure C
ISO 13379- Condition monitoring and diagnostics of machines — Data interpretation and diagnostics 2:2015 techniques — Part 2: Data-driven applications B
ISO Condition monitoring and diagnostics of machines — Approaches for performance diagnosis 18129:2015 C
ISO 18436- Condition monitoring and diagnostics of machines — Requirements for qualification and as- 2:2014 sessment of personnel — Part 2: Vibration condition monitoring and diagnostics F
TC 131 Fluid power systems ISO 3723:2015 Hydraulic fluid power — Filter elements — Method for end load test A
TC 134 Fertilizers and soil conditioners
ISO * Fertilizers and soil conditioners — Determination of water-soluble potassium content — Po- 17319:2015 tassium tetraphenylborate gravimetric method D
TC 135 Non -destructive testing ISO Non-destructive testing — Evaluation of vision acuity of NDT personnel 18490:2015 B
TC 145 Graphical symbols ISO Graphical symbols — Public information symbols — Amendment 2 7001:2007/Am XZ d 2:2015
ISO Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend- 7010:2011/Am ment 6 XZ d 6:2014 TC 146 Air quality ISO Air quality — Meteorology — Siting classifications for surface observing stations on land 19289:2015 C
TC 149 Cycles
ISO 6742- * Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices 1:2015 C
ISO 6742- * Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices 2:2015 C
ISO 6742- * Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and 3:2015 retro-reflective devices B
ISO 6742- * Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the 4:2015 cycle's movement C
ISO 6742- * Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the 5:2015 cycle's movement A
TC 150 Implants for surgery ISO Instrumentation for use in association with non-active surgical implants — General require- 16061:2015 ments D
ISO Concentrates for haemodialysis and related therapies 13958:2014 D
ISO Water for haemodialysis and related therapies 13959:2014 C
ISO Guidance for the preparation and quality management of fluids for haemodialysis and related 23500:2014 therapies H
ISO Water treatment equipment for haemodialysis applications and related therapies 26722:2014 E
TC 156 Corrosion of metals and alloys ISO Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion 16701:2015 test involving exposure under controlled conditions of humidity cycling and intermittent spray- C ing of a salt solution TC 158 Analysis of g ases ISO 7504:2015 Gas analysis — Vocabulary C
ISO Gas analysis — Purity analysis and the treatment of purity data 19229:2015 B
TC 159 Ergonomics ISO 9241- Ergonomics of human-system interaction — Part 392: Ergonomic recommendations for the 392:2015 reduction of visual fatigue from stereoscopic images E
TC 171 Document management applications ISO 12651- Electronic document management — Vocabulary — Part 2: Workflow management 2:2014 B
TC 182 Geotechnics ISO 18674- Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — 1:2015 Part 1: General rules E
TC 184 Automation systems and integration
ISO/TS 15926- * Industrial automation systems and integration — Integration of life-cycle data for process 11:2015 plants including oil and gas production facilities — Part 11: Methodology for simplified indus- G trial usage of reference data TC 188 Small craft ISO Small craft — Owner's manual — Amendment 1 10240:2004/A XZ md 1:2015 TC 190 Soil quality
ISO * Soil quality — Vocabulary 11074:2015 A
ISO/TS Soil quality — Determination of some selected phenols and chlorophenols — Gas chromato- 17182:2014 graphic method with mass spectrometric detection C
TC 199 Safety of machinery ISO/TR 22100- * Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to 1:2015 type-B and type-C standards C
TC 204 Intelligent transport systems
ISO/TR 17185- * Intelligent transport systems — Public transport user information — Part 3: Use cases for 3:2015 journey planning systems and their interoperation F
ISO/TS * Intelligent transport systems — Cooperative systems — Definition of a global concept for 18750:2015 Local Dynamic Maps G
TC 205 Building environment design ISO 11855- Building environment design — Design, dimensioning, installation and control of embedded 2:2012 radiant heating and cooling systems — Part 2: Determination of the design heating and cool- G ing capacity
ISO 11855- Building environment design — Design, dimensioning, installation and control of embedded 3:2012 radiant heating and cooling systems — Part 3: Design and dimensioning C
ISO 11855- Building environment design — Design, dimensioning, installation and control of embedded 4:2012 radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic G heating and cooling capacity of Thermo Active Building Systems (TABS)
ISO 11855- Building environment design — Design , dimensioning, installation and control of embedded 5:2012 radiant heating and cooling systems — Part 5: Installation B
ISO 16484- Building automation and control systems (BACS) — Part 6: Data communication conformance 6:2014 testing H
TC 206 Fine ceramics ISO Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for deter- 18558:2015 mining elastic modulus and bending strength of ceramic tube and rings B
TC 21 0 Quality management and corresponding general aspects for medical devices ISO 80369- Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common 20:2015 test methods E
TC 213 Dimensional and geometr ical product specifications and verification ISO 16610- Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: 40:2015 Basic concepts C
ISO 16610- Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: 49:2015 Scale space techniques C
TC 215 Health informatics
ISO/TR * Health informatics — Principles and guidelines for the measurement of conformance in the 12310:2015 implementation of terminological systems E
ISO/TS 18790- * Health informatics — Profiling framework and classification for Traditional Medicine informat- 1:2015 ics standards development — Part 1: Traditional Chinese Medicine B
TC 219 Floor coverings
ISO * Resilient floor coverings — Determination of seam strength 16906:2015 A
TC 221 Geosynthetics ISO Geosynthetics — Wide-width tensile test 10319:2015 C
TC 226 Mate rials for the production of primary aluminium
ISO 15379- * Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: 1:2015 Determination of the expansion due to sodium penetration with application of pressure A
ISO 15379- * Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: 2:2015 Determination of the expansion due to sodium penetration without application of pressure A
TC 228 Tourism a nd related services ISO Tourism and related services — Requirements and recommendations for beach operation 13009:2015 E
ISO * Tourism services — Industrial tourism — Service provision 13810:2015 C
ISO Tourism and related services — Tourist services for public use provided by Natural Protected 18065:2015 Areas Authorities — Requirements C
TC 229 Nanotechnologies
IEC/TS 62607- * Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part 2-1:2015 2-1: B
TC 238 Solid biofuels ISO Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen 16948:2015 B
ISO Solid biofuels — Determination of minor elements 16968:2015 B
TC 266 Biomimetics
ISO * Biomimetics — Terminology, concepts and methodology 18458:2015 D
ISO * Biomimetics — Biomimetic structural optimization 18459:2015 D
TC 268 Sustainable development in communities
ISO/TS * Smart community infrastructures — Principles and requirements for performance metrics 37151:2015 G
TC 292 Security
ISO * Societal security — Emergency management — Guidelines for public warning 22322:2015 B
CASCO Committee on conformity assessment ISO/IEC TS Conformity assessment — Requirements for bodies providing audit and certification of man- 17021-6:2014 agement systems — Part 6: Competence requirements for auditing and certification of busi- A ness continuity management systems
ISO/IEC TS Conformity assessment — Requirements for bodies providing audit and certification of man- 17021-7:2014 agement systems — Part 7: Competence requirements for auditing and certification of road A traffic safety management systems
ISO/IEC TR Conformity assessment — Example of a certification scheme for tangible products 17026:2015 E
JTC 1 Information technology
ISO/IEC * Information technology — Universal Coded Character Set (UCS) — Amendment 1: Cherokee 10646:2014/A supplement and other characters D md 1:2015
ISO/IEC 8825- * Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules 2:2008/Cor (PER) — Part 2: — Technical Corrigendum 3 free 3:2015
ISO/IEC 8825- * Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules 2:2008/Cor (PER) — Part 2: — Technical Corrigendum 4 free 4:2015
ISO/IEC * Information technology — Telecommunications and information exchange between systems 15149-2:2015 — Magnetic field area network (MFAN) — Part 2: In-band Control Protocol for Wireless Power E Transfer
ISO/IEC/IEEE * Systems and software engineering — System life cycle processes 15288:2015 H
ISO/IEC/IEEE * Systems and software engineering — Content of life-cycle information items (documentation) 15289:2015 H
ISO/IEC/IEEE * Systems and software engineering — Engineering and management of websites for systems, 23026:2015 software, and services information F
ISO/IEC/IEEE * Systems and software engineering — Content management for product life-cycle, user and 26531:2015 service management documentation F
ISO/IEC * Identification cards — Optical memory cards — Holographic recording method — Part 1: 11695-1:2015 Physical characteristics B
ISO/IEC TS * Information Technology — Programming languages, their environments, and system software 18661-2:2015 interfaces — Floating-point extensions for C — Part 2: Decimal floating-point arithmetic G
ISO/IEC TS * Information Technology — Security Techniques — Physical Security Attacks, Mitigation 30104:2015 Techniques and Security Requirements E
ISO/IEC * Information technology — JPEG 2000 image coding system: Reference software — Part 5: 15444- — Amendment 2: Additional reference software XZ 5:2003/Amd 2:2015
ISO/IEC * Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding 23003- (SAOC) — Amendment 1: SAOC conformance XZ 2:2010/Amd 1:2015
ISO/IEC * Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding 23003- (SAOC) — Amendment 2: SAOC reference software XZ 2:2010/Amd 2:2015
ISO/IEC * Information technology — MPEG audio technologies — Part 3: Unified speech and audio 23003- coding — Amendment 2: Reference software XZ 3:2012/Amd 2:2015
ISO/IEC * Information technology — MPEG audio technologies — Part 3: Unified speech and audio 23003- coding — Amendment 2: Reference software — Technical Corrigendum 1 free 3:2012/Amd 2:2015/Cor 1:2015
ISO/IEC * Information technology — High efficiency coding and media delivery in heterogeneous envi- 23008-2:2015 ronments — Part 2: High efficiency video coding H
ISO/IEC * Information technology — Automatic identification and data capture techniques — Part 10: 29167-10:2015 Crypto suite AES-128 security services for air interface communications D
ISO/IEC * Information technology — Automatic identification and data capture techniques — Part 12: 29167-12:2015 Crypto suite ECC-DH security services for air interface communications F
ISO/IEC * Information technology — Automatic identification and data capture techniques — Part 13: 29167-13:2015 Crypto suite Grain-128A security services for air interface communications F
ISO/IEC * Information technology — User interface guidelines on menu navigation — Part 2: Navigation 17549-2:2015 with 4-direction devices C
ISO/IEC * Information technology — Biometric data interchange formats — Part 1: Framework — 19794- Amendment 2: Framework for XML encoding XZ 1:2011/Amd 2:2015
ISO/IEC TR * Information Technology — Biometrics — Guide on designing accessible and inclusive bio- 29194:2015 metric systems C
Standards confirmed
The following International Standards are confimred for a five year period:
TC 4 Rolling bearings
ISO 12240-1:1998 (reconfirmed)
ISO 12240-2:1998 (reconfirmed)
ISO 12240-3:1998 (reconfirmed)
ISO 12240-4:1998 (reconfirmed)
ISO 76:2006 (reconfirmed) TC 8 Ships and marine techn ology
ISO 5621:1984 (reconfirmed)
TC 17 Steel
ISO 437:1982 (reconfirmed)
TC 22 Road vehicles
ISO 6622-1:2003 (reconfirmed)
ISO 16247:2004 (reconfirmed)
ISO 20826:2006 (reconfirmed)
TC 34 Food products
ISO 21570:2005 (reconfirmed)
ISO 21571:2005 (reconfirmed)
ISO 24276:2006 (reconfirmed)
TC 35 Paints and varnishes
ISO 1513:2010
ISO 1520:2006 (reconfirmed)
ISO 1522:2006 (reconfirmed)
ISO 2884-1:1999 (reconfirmed)
ISO 3231:1993 (reconfirmed)
ISO 6504-1:1983 (reconfirmed)
ISO 6504-3:2006 (reconfirmed)
ISO 6860:2006 (reconfirmed)
ISO 9117-2:2010 ISO 9117-3:2010 ISO 16053:2010
ISO 21227-2:2006 (reconfirmed)
TC 38 Textiles
ISO 105-B03:1994 (reconfirmed)
ISO 105-B04:1994 (reconfirmed)
ISO 105-C07:1999 (reconfirmed)
ISO 105-E06:2006 (reconfirmed)
ISO 105-E08:1994 (reconfirmed)
ISO 105-E10:1994 (reconfirmed)
ISO 105-E11:1994 (reconfirmed)
ISO 105-E13:1994 (reconfirmed)
ISO 105-E14:1994 (reconfirmed)
ISO 105-E16:2006 (reconfirmed)
ISO 105-X04:1994 (reconfirmed)
ISO 105-X05:1994 (reconfirmed) ISO 105-X06:1994 (reconfirmed)
ISO 105-X07:1994 (reconfirmed)
ISO 105-X08:1994 (reconfirmed)
ISO 105-X11:1994 (reconfirmed)
ISO 105-X13:1994 (reconfirmed)
TC 41 Pulleys and belts (including veebelts)
ISO 21183-1:2005 (reconfirmed)
TC 4 4 Welding and allied processes
ISO 15011-2:2009 ISO 15011-3:2009
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS 12747:2011
ISO 14723:2009 ISO 10423:2009 ISO 13624-1:2009
ISO 13628-2:2006 (reconfirmed)
ISO 13628-5:2009 ISO 13628-8:2002
ISO 13628-9:2000 (reconfirmed)
ISO 15136-1:2009
TC 68 Financial services
ISO/TR 19038:2005
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 6527:1982 (reconfirmed)
ISO 7385:1983 (reconfirmed)
ISO 8107:1993 (reconfirmed)
TC 87 Cork
ISO 8724:2009
TC 89 Wood -based panels
ISO 27528:2009
TC 94 Personal safety -- Protective clothing and equipment
ISO 6942:2002 (reconfirmed)
TC 96 Cranes
ISO 12480-3:2005 (reconfirmed)
TC 110 Industrial trucks ISO/TS 3691- 7:2011
TC 164 Mechanical testing of metals
ISO 16630:2009
TC 171 Document management applications
ISO 3272-1:2003 (reconfirmed)
ISO 4087:2005 (reconfirmed)
ISO 6199:2005 (reconfirmed)
ISO 6342:2003 (reconfirmed)
ISO 10196:2003 (reconfirmed)
TC 172 Optics and photonics
ISO 8980-5:2005 ISO 10342:2010 ISO 10936-2:2010
ISO 10942:2006 (reconfirmed)
ISO 11979-9:2006 (reconfirmed)
ISO 12865:2006 (reconfirmed)
ISO 12867:2010 ISO 15752:2010
TC 184 Automation systems and integration
ISO/TS 8000- 100:2009
ISO/TS 8000- 150:2011
ISO/TS 10303- 26:2011
ISO 10303- (reconfirmed) 207:1999
ISO 10303- (reconfirmed) 225:1999
ISO/TR 10303- (reconfirmed) 307:2000
ISO/TS 10303- 433:2011
ISO/TS 10303- 439:2011
ISO 10303- (reconfirmed) 512:1999
ISO 10303- (reconfirmed) 514:1999
ISO/TS 10303- 1013:2011 ISO/TS 10303- 1021:2011
ISO/TS 10303- 1025:2011
ISO/TS 10303- 1062:2011
ISO/TS 10303- 1133:2011
ISO/TS 10303- 1164:2011
ISO/TS 10303- 1233:2011
ISO/TS 10303- 1241:2011
ISO/TS 10303- 1251:2011
ISO/TS 10303- 1255:2011
ISO/TS 10303- 1258:2011
ISO/TS 10303- 1260:2011
ISO/TS 10303- 1261:2011
ISO/TS 10303- 1267:2011
ISO/TS 10303- 1271:2011
ISO/TS 10303- 1278:2011
ISO/TS 10303- 1281:2011
ISO/TS 10303- 1283:2011
ISO/TS 10303- 1287:2011
ISO/TS 10303- 1292:2011
ISO/TS 10303- 1293:2011
ISO/TS 10303- 1295:2011
ISO/TS 10303- 1297:2011
ISO/TS 10303- 1304:2011
ISO/TS 10303- 1306:2011
ISO/TS 10303- 1307:2011
ISO/TS 10303- 1348:2011
ISO/TS 10303- 1371:2011
ISO/TS 10303- 1400:2011
ISO/TS 10303- 1401:2011
ISO/TS 10303- 1433:2011
ISO/TS 10303- 1434:2011
ISO/TS 10303- 1435:2011
ISO/TS 10303- 1436:2011
ISO/TS 10303- 1437:2011
ISO/TS 10303- 1438:2011
ISO/TS 10303- 1448:2011
ISO/TS 10303- 1450:2011
ISO/TS 10303- 1466:2011
ISO/TS 10303- 1467:2011
ISO/TS 10303- 1475:2011
ISO/TS 10303- 1477:2011
ISO/TS 10303- 1486:2011
ISO/TS 10303- 1489:2011
ISO/TS 10303- 1786:2011
ISO/TS 10303- 1801:2011
TC 198 Sterilization of health care products
ISO 11607-1:2006 (reconfirmed)
ISO 11607-2:2006 (reconfirmed)
ISO 11737-2:2009
JTC 1 Information technology
ISO/IEC TR 9575:1995
ISO/IEC TR 9577:1999
ISO/IEC TR 9578:1990
ISO/IEC TR 10021-11:1999
ISO/IEC TR 10171:2000
ISO/IEC TR 11802-5:1997
ISO/IEC 13560:2009
ISO/IEC TR 13594:1995
ISO/IEC TR 15294:2000
ISO/IEC TR 18016:2003
ISO/IEC (reconfirmed) 20113:2004
ISO/IEC (reconfirmed) 20114:2004
ISO/IEC (reconfirmed) 20115:2004
ISO/IEC (reconfirmed) 20116:2004
ISO/IEC (reconfirmed) 20117:2004
ISO/IEC 26907:2009
ISO/IEC 26908:2009
ISO/IEC 18013- 3:2009
Standards withdrawn
Period from 01 May to 31 May 2015
TC 22 Road vehicles ISO 6550-1:1994 (replaced by ISO 17447-1:2015, ISO 17447-2:2015, ISO 17447-3:2015)
ISO 6550-2:1994 (replaced by ISO 17447-1:2015, ISO 17447-2:2015, ISO 17447-3:2015)
ISO 7578:2008 (replaced by ISO 17447-1:2015, ISO 17447-2:2015, ISO 17447-3:2015)
TC 34 Food products
ISO/TS 16649- (replaced by ISO 16649-3:2015) 3:2005
TC 35 Paints and varnishes
ISO 23811:2009 (replaced by ISO 3233-3:2015)
TC 213 Dimensional and geometrical product specifications and verification
ISO/TS 16610- (replaced by ISO 16610-40:2015) 40:2006
ISO/TS 16610- (replaced by ISO 16610-49:2015) 49:2006
TMBG Technical Management Board - groups
ISO 554:1976 (replaced by )
ISO 558:1980 (replaced by )
ISO 3205:1976 (replaced by )
ISO 4677-1:1985 (replaced by )
ISO 4677-2:1985 (replaced by )
ISO/TS (replaced by ) 10674:2011