Nr. Standard reference Title Identification cards - Optical memory cards - Part 3: Authentication 1 ISO/IEC 11693-3:2015 techniques Information technology - Security techniques - A framework for 2 ISO/IEC 24760-2:2015 identity management - Part 2: Reference architecture and requirements Information technology - MPEG video technologies - Part 5: ISO/IEC 23002-5:2013/Amd Reconfigurable media coding conformance and reference software - 3 1:2015 Amendment 1: Graphics tool library (GTL) reference software and conformance Information technology - Dynamic adaptive streaming over HTTP ISO/IEC 23009-1:2014/Amd 4 (DASH) - Part 1: Media presentation description and segment formats - 1:2015 Amendment 1: High Profile and Availability Time Synchronization Information technology - Automatic identification and data capture 5 ISO/IEC 29167-17:2015 techniques - Part 17: Crypto suite cryptoGPS security services for air interface communications Information technology - Keyboard layouts for office systems - Part 11: 6 ISO/IEC 9995-11:2015 Functionality of dead keys and repertoires of characters entered by dead keys 7 ISO 14084-1:2015 Process diagrams for power plants - Part 1: Specification for diagrams Specifications for diagrams for process industry - Part 2: Measurement 8 ISO 15519-2:2015 and control Steel and steel products - Location and preparation of samples and 9 ISO 377:2013 test pieces for mechanical testing Road vehicles - Vehicle test methods for electrical disturbances from 10 ISO 11451-1:2015 narrowband radiated electromagnetic energy - Part 1: General principles and terminology Road vehicles - Vehicle test methods for electrical disturbances from 11 ISO 11451-2:2015 narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources Road vehicles - Vehicle test methods for electrical disturbances from 12 ISO 11451-3:2015 narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation Road vehicles - Component test methods for electrical disturbances 13 ISO 11452-1:2015 from narrowband radiated electromagnetic energy - Part 1: General principles and terminology Road vehicles - Component test methods for electrical disturbances 14 ISO 11452-8:2015 from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields 15 ISO 3006:2015 Road vehicles - Passenger car wheels for road use - Test methods 16 ISO 12900:2015 Hard coal - Determination of abrasiveness Determination of sulfur in refractory products and raw materials by 17 ISO 22016:2015 gravimetric, photometric and titrimetric methods Cereals and cereal products - Common wheat (Triticum aestivum L.) - 18 ISO 27971:2015 Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology Microbiology of the food chain - Sampling techniques for 19 ISO/TS 17728:2015 microbiological analysis of food and feed samples Animal and vegetable fats and oils - Gas chromatography of fatty acid 20 ISO 12966-4:2015 methyl esters - Part 4: Determination by capillary gas chromatography Cinematography - B-chain electro-acoustic reponse of motion-picture 21 ISO 2969:2015 control rooms and indoor theatres - Specifications and measurements Acoustics - Laboratory measurement of sound insulation of building ISO 10140-3:2010/Amd 22 elements - Part 3: Measurement of impact sound insulation - 1:2015 Amendment 1 Rubber, vulcanized or thermoplastic - Determination of tear strength - 23 ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces Rubber, vulcanized or thermoplastic - Determination of tear strength - 24 ISO 34-2:2015 Part 2: Small (Delft) test pieces Rubber, vulcanized or thermoplastic - Determination of tendency to 25 ISO 6505:2015 adhere to and corrode metals 26 ISO 19242:2015 Rubber - Determination of total sulfur content by ion chromatography 27 ISO 23794:2015 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance 28 ISO 2028:2015 Synthetic rubber latex - Preparation of dry polymer Rubber compounding ingredients - Carbon black - Determination of 29 ISO 15825:2015 aggregate size distribution by disc centrifuge photosedimentometry Rubber compounding ingredients - Determination of multipoint 30 ISO 18852:2015 nitrogen surface area (NSA) and statistical thickness surface area (STSA) Rubber seals - Joint rings for water supply, drainage and sewerage 31 ISO 4633:2015 pipelines - Specification for materials Plastics - Verification of pendulum impact-testing machines - Charpy, 32 ISO 13802:2015 Izod and tensile impact-testing Petroleum and natural gas industries - Design and operation of subsea 33 ISO 13628-15:2011 production systems - Part 15: Subsea structures and manifolds Sports and other recreational facilities and equipment - Injury and 34 ISO/TR 20183:2015 safety definitions and thresholds - Guidelines for their inclusion in standards PPE for firefighters - Test methods and requirements for PPE used by 35 ISO 11999-1:2015 firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 1: General

PPE for firefighters - Test methods and requirements for PPE used by 36 ISO/TS 11999-2:2015 firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 2: Compatibility

PPE for firefighters - Test methods and requirements for PPE used by 37 ISO 11999-3:2015 firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 3: Clothing

PPE for firefighters - Test methods and requirements for PPE used by 38 ISO 11999-4:2015 firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 4: Gloves 39 ISO 11660-2:2015 Cranes - Access, guards and restraints - Part 2: Mobile cranes 40 ISO 6872:2015 Dentistry - Ceramic materials Thermal spraying - Components with thermally sprayed coatings - 41 ISO 12670:2011 Technical supply conditions 42 ISO 12679:2011 Thermal spraying - Recommendations for thermal spraying 43 ISO/TR 9212:2015 Hydrometry - Methods of measurement of bedload discharge Liquid pumps and pump units - Noise test code - Grades 2 and 3 of 44 ISO 20361:2015 accuracy 45 ISO 5802:2001/Amd 1:2015 Industrial fans - Performance testing in situ - Amendment 1 Graphic technology - Laboratory preparation test prints - Part 2: Liquid 46 ISO 2834-2:2015 printing inks Fertilizers and soil conditioners - Determination of arsenic, cadmium, 47 ISO 17318:2015 chromium, lead and mercury contents Fertilizers and soil conditioners - Analytical methods for Sulfur Coated 48 ISO 17322:2015 Urea (SCU) Fertilizers and soil conditioners - Sulfur Coated Urea (SCU) - General 49 ISO 17323:2015 requirements Thermoplastics pipes - Determination of tensile properties - Part 3: 50 ISO 6259-3:2015 Polyolefin pipes Water quality - Calanoid copepod early-life stage test with Acartia 51 ISO 16778:2015 tonsa Industrial valves - Measurement, test and qualification procedures for 52 ISO 15848-1:2015 fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves Industrial valves - Measurement, test and qualification procedures for 53 ISO 15848-2:2015 fugitive emissions - Part 2: Production acceptance test of valves Corrosion of metals and alloys - Method for determination of the 54 ISO 18069:2015 uniform corrosion rate of stainless steels and nickel based alloys in liquids Corrosion of metals and alloys - Determination of AC corrosion - 55 ISO 18086:2015 Protection criteria Optics and photonics - Guidance for the selection of environmental 56 ISO 10109:2015 tests 57 ISO 8036:2015 Microscopes - Immersion liquids for light microscopy Safety of toys - Part 5: Determination of total concentration of certain 58 ISO 8124-5:2015 elements in toys Geometrical product specifications (GPS) - Filtration - Part 41: 59 ISO 16610-41:2015 Morphological profile filters: Disk and horizontal line-segment filters Aluminium oxide primarily used for the production of aluminium - 60 ISO 18843:2015 Method for the determination of flow time 61 ISO/TS 80004-2:2015 Nanotechnologies - Vocabulary - Part 2: Nano-objects 62 ISO 18314-1:2015 Analytical colorimetry - Part 1: Practical colour measurement Analytical colorimetry - Part 2: Saunderson correction, solutions of the 63 ISO 18314-2:2015 Kubelka-Munk equation, tinting strength, hiding power 64 ISO 18314-3:2015 Analytical colorimetry - Part 3: Special indices Conformity assessment - Requirements for bodies providing audit and 65 ISO/IEC 17021-1:2015 certification of management systems - Part 1: Requirements Conformity assessment - General requirements for peer assessment of 66 ISO/IEC 17040:2005 conformity assessment bodies and accreditation bodies Conformity assessment - Supplier's declaration of conformity - Part 1: 67 ISO/IEC 17050-1:2004 General requirements Conformity assessment - Supplier's declaration of conformity - Part 2: 68 ISO/IEC 17050-2:2004 Supporting documentation Information technology - UPnP Device Architecture - Part 12-1: 69 ISO/IEC 29341-12-1:2015 Remote User Interface Device Control Protocol - Remote User Interface Client Device Information technology - UPnP Device Architecture - Part 12-2: 70 ISO/IEC 29341-12-2:2015 Remote User Interface Device Control Protocol - Remote User Interface Server Device Information technology - UPnP Device Architecture - Part 3-10: Audio 71 ISO/IEC 29341-3-10:2015 Video Device Control Protocol - Audio Video Transport Service Information technology - UPnP Device Architecture - Part 7-11: 72 ISO/IEC 29341-7-11:2015 Lighting Device Control Protocol - Switch Power Service Information technology - UPnP Device Architecture - Part 12-10: 73 ISO/IEC 29341-12-10:2015 Remote User Interface Device Control Protocol - Remote User Interface Client Service Information technology - UPnP Device Architecture - Part 12-11: 74 ISO/IEC 29341-12-11:2015 Remote User Interface Device Control Protocol - Remote User Interface Server Service Information technology - Telecommunications and information ISO/IEC 29180:2012/Cor 75 exchange between systems - Security framework for ubiquitous sensor 1:2015 networks -- Technical Corrigendum 1 Identification cards - Contactless integrated circuit cards - Vicinity ISO/IEC 15693-3:2009/Amd 76 cards - Part 3: Anticollision and transmission protocol - Amendment 3: 3:2015 Extended VICC memory organisation Information technology - AT Attachment 8 - Part 101: ATA/ATAPI 77 ISO/IEC 17760-101:2015 Command Set (ATA8-ACS) ISO/IEC 14496-12:2012/Cor Information technology - Coding of audio-visual objects - Part 12: ISO 78 4:2015 base media file format - Technical Corrigendum 4 ISO/IEC 15444-12:2012/Cor Information technology - JPEG 2000 image coding system - Part 12: 79 4:2015 ISO base media file format - Technical Corrigendum 4 Information technology - Scalable compression and coding of 80 ISO/IEC 18477-1:2015 continuous-tone still images - Part 1: Scalable compression and coding of continuous-tone still images Paper, board and pulps - Determination of residue (ash) on ignition at 81 ISO 1762:2015 525 degrees C Cinematography - Picture image area on 35 mm motion-picture release 82 ISO 2939:2015 prints - Position and dimensions and analogue and digital photographic sound to picture record displacement Test code for machine tools - Part 7: Geometric accuracy of axes of 83 ISO 230-7:2015 rotation Quality requirements for fusion welding of metallic materials - Part 5: 84 ISO 3834-5:2015 Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction 85 ISO 18517:2015 and guide Petroleum and natural gas industries - Characteristics of LNG, 86 ISO 16903:2015 influencing the design, and material selection Petroleum, petrochemical and natural gas industries - Guidelines on 87 ISO/TS 17969:2015 competency for personnel Infusion equipment for medical use - Part 8: Infusion sets for single 88 ISO 8536-8:2015 use with pressure infusion apparatus Infusion equipment for medical use - Part 9: Fluid lines for single use 89 ISO 8536-9:2015 with pressure infusion equipment Infusion equipment for medical use - Part 10: Accessories for fluid 90 ISO 8536-10:2015 lines for single use with pressure infusion equipment Infusion equipment for medical use - Part 11: Infusion filters for single 91 ISO 8536-11:2015 use with pressure infusion equipment Snowboards - Binding mounting area - Part 2: Requirements and test 92 ISO 10958-2:2015 methods for snowboards with inserts Eye and face protection - Sunglasses and related eyewear - Part 2: 93 ISO 12312-2:2015 Filters for direct observation of the sun 94 ISO 9928-1:2015 Cranes - Crane operating manual - Part 1: General 95 ISO/ASME 14414:2015 Pump system energy assessment Medical electrical equipment - Part 2-71: Particular requirements for 96 IEC 80601-2-71:2015 the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment Non-destructive testing - Characterization and verification of ultrasonic 97 ISO 18563-1:2015 phased array equipment - Part 1: Instruments Water quality - Radon-222 - Part 4: Test method using two-phase 98 ISO 13164-4:2015 liquid scintillation counting Corrosion of metals and alloys - Guidelines for corrosion test by 99 ISO 17093:2015 electrochemical noise measurements Metallic materials - Calibration of extensometer systems used in 100 ISO 9513:2012 uniaxial testing Optics and optical instruments - Field procedures for testing geodetic 101 ISO 17123-8:2015 and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK) Wheelchair seating - Part 12: Apparatus and method for cushion 102 ISO/TS 16840-12:2015 envelopment testing Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process 103 ISO 11354-2:2015 interoperability - Part 2: Maturity model for assessing enterprise interoperability Environmental labels and declarations - Type III environmental 104 ISO 14025:2006 declarations - Principles and procedures 105 ISO 19147:2015 Geographic information - Transfer Nodes Geometrical product specification (GPS) - Surface texture: Areal - Part 106 ISO 25178-606:2015 606: Nominal characteristics of non-contact (focus variation) instruments Footwear - Test method for slide fasteners - Attachment strength of 107 ISO 10750:2015 end stops Societal security - Emergency management - Guidelines for colour- 108 ISO 22324:2015 coded alerts Leather - Determination of ethoxylated alkylphenols - Part 1: Direct 109 ISO 18218-1:2015 method Leather - Determination of ethoxylated alkylphenols - Part 2: Indirect 110 ISO 18218-2:2015 method Information technology - Open Document Format for Office 111 ISO/IEC 26300-1:2015 Applications (OpenDocument) v1.2 - Part 1: OpenDocument Schema Information technology - Open Document Format for Office 112 ISO/IEC 26300-2:2015 Applications (OpenDocument) v1.2 - Part 2: Recalculated Formula (OpenFormula) Format Information technology - Open Document Format for Office 113 ISO/IEC 26300-3:2015 Applications (OpenDocument) v1.2 - Part 3: Packages 114 ISO/IEC TS 18822:2015 Programming languages - C++ - File System Technical Specification Information technology - Digitally recorded media for information ISO/IEC 30190:2013/Cor interchange and storage - 120 mm Single Layer (25,0 Gbytes per disk) 115 1:2015 and Dual Layer (50,0 Gbytes per disk) BD Recordable disk - Technical Corrigendum 1 Information technology - Digitally recorded media for information ISO/IEC 30192:2013/Cor interchange and storage - 120 mm Single Layer (25,0 Gbytes per disk) 116 1:2015 and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk - Technical Corrigendum 1 Information technology - Digitally recorded media for information ISO/IEC 30193:2013/Cor 117 interchange and storage - 120 mm Triple Layer (100,0 Gbytes per 1:2015 disk) BD Rewritable disk - Technical Corrigendum 1 Information technology - Small Computer System Interface (SCSI) - 118 ISO/IEC 14776-153:2015 Part 153: Serial Attached SCSI - 2.1 (SAS-2.1) Information technology - Security techniques - Guidance on assuring 119 ISO/IEC 27041:2015 suitability and adequacy of incident investigative method Information technology - Security techniques - Guidelines for the 120 ISO/IEC 27042:2015 analysis and interpretation of digital evidence Information technology - Business Operational View - Part 6: Technical 121 ISO/IEC TR 15944-6:2015 introduction to e-Business modelling Information technology - Database languages - SQL Technical Reports - 122 ISO/IEC TR 19075-2:2015 Part 2: SQL Support for Time-Related Information Information technology - Database languages - SQL Technical Reports - 123 ISO/IEC TR 19075-3:2015 Part 3: SQL Embedded in Programs using the JavaTM programming language Information technology - Database languages - SQL Technical Reports - 124 ISO/IEC TR 19075-4:2015 Part 4: SQL with Routines and types using the JavaTM programming language Information technology - Metamodel framework for interoperability 125 ISO/IEC 19763-1:2015 (MFI) - Part 1: Framework Information technology - Document description and processing 126 ISO/IEC 29500-3:2015 languages - Office Open XML File Formats - Part 3: Markup Compatibility and Extensibility Technical product documentation (TPD) - General principles of 127 ISO 128-43:2015 presentation - Part 43: Projection methods in building drawings 128 ISO 4969:2015 Steel - Etching method for macroscopic examination Steel - Measurement method for the evaluation of hydrogen 129 ISO 16573:2015 embrittlement resistance of high strength steels Aerospace - Omega clamps (saddle clamps) for fluid systems - 130 ISO 8177:2015 Dimensions Space data and information transfer systems - Encapsulation service - 131 ISO 10537:2010/Amd 1:2015 Amendment 1 Space data and information transfer systems - Standard formatted 132 ISO 12175:1994/Amd 1:2015 data units - Structure and construction rules - Amendment 1 Space data and information transfer systems - Tracking data message - 133 ISO 13526:2010/Amd 1:2015 Amendment 1 Space data and information transfer systems - AOS (advanced orbiting 134 ISO 22666:2007/Amd 1:2015 systems) space data link protocol - Amendment 1 Road vehicles - Dummies for restraint system testing - Part 2: Child 135 ISO/TR 12349-2:2015 dummies 136 ISO 502:2015 Coal - Determination of caking power - Gray-King coke test Assembly tools for screws and nuts - Square drive adaptor with 137 ISO 3317:2015 hexagon or cylindrical flat drive, for power socket wrenches Photography - Digital cameras - Geometric distortion (GD) 138 ISO 17850:2015 measurements Iron ores - Determination of calcium - Flame atomic absorption 139 ISO 10203:2015 spectrometric method Iron ores - Determination of nickel - Flame atomic absorption 140 ISO 15633:2015 spectrometric method 141 ISO 16954:2015 Dentistry - Test methods for dental unit waterline biofilm treatment Thermal spraying - Evaluation of adhesion/cohesion of thermal sprayed 142 ISO 27307:2015 ceramic coatings by transverse scratch testing Vacuum technology - Turbomolecular pumps - Measurement of rapid 143 ISO 27892:2010 shutdown torque 144 ISO 12646:2015 Graphic technology - Displays for colour proofing - Characteristics 145 ISO 18619:2015 Image technology colour management - Black point compensation Retrieval and analysis of surgical implants - Part 1: Retrieval and 146 ISO 12891-1:2015 handling 147 ISO 5208:2015 Industrial valves - Pressure testing of metallic valves Nickel alloys - Flame atomic absorption spectrometric analysis - Part 1: 148 ISO 7530-1:2015 Determination of cobalt, chromium, copper, iron and manganese Lasers and laser-related equipment - Standard optical components - 149 ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges Lasers and laser-related equipment - Standard optical components - 150 ISO 11151-2:2015 Part 2: Components for the infrared spectral range Copper sulfide concentrates - Determination of copper content - 151 ISO 10258:2015 Titrimetric methods Zinc sulfide concentrates - Determination of silver content - Acid 152 ISO 15247:2015 dissolution and flame atomic absorption spectrometric method Surface chemical analysis - Surface characterization - Measurement of 153 ISO 18337:2015 the lateral resolution of a confocal fluorescence microscope Environmental management - Environmental communication - 154 ISO 14063:2006 Guidelines and examples Environmental management - Life cycle assessment - Principles and 155 ISO 14040:2006 framework Geographic information - Ontology - Part 2: Rules for developing 156 ISO 19150-2:2015 ontologies in the Web Ontology Language (OWL) Geometrical product specification (GPS) - Filtration - Part 61: Linear 157 ISO 16610-61:2015 areal filters - Gaussian filters Identification cards - Optical memory cards - Linear recording method - 158 ISO/IEC 11694-3:2015 Part 3: Optical properties and characteristics Programming Languages - Technical Specification for C++ Extensions 159 ISO/IEC TS 19570:2015 for Parallelism Information technology - Generic coding of moving pictures and 160 ISO/IEC 13818-1:2015 associated audio information - Part 1: Systems Information technology - MPEG audio technologies - Part 3: Unified ISO/IEC 23003-3:2012/Amd 161 speech and audio coding - Amendment 1: Conformance - Technical 1:2014/Cor 1:2015 Corrigendum 1 Animal feeding stuffs - Determination of water-soluble chlorides 162 ISO 6495-1:2015 content - Part 1: Titrimetric method Test conditions for machining centres - Part 7: Accuracy of finished 163 ISO 10791-7:2014 test pieces Test conditions for die sinking electro-discharge machines (die sinking 164 ISO 11090-1:2014 EDM) - Testing of the accuracy - Part 1: Single-column machines (cross-slide table type and fixed-table type) Test conditions for die sinking electro-discharge machines (die sinking 165 ISO 11090-2:2014 EDM) - Testing of the accuracy - Part 2: Double-column machines (slide-head type) Test conditions for numerically controlled turning machines and turning 166 ISO 13041-5:2015 centres - Part 5: Accuracy of speeds and interpolations Graphic technology - Colour data exchange format (CxF/X) - Part 4: 167 ISO 17972-4:2015 Spot colour characterisation data (CxF/X-4) Wheelchairs - Part 8: Requirements and test methods for static, impact 168 ISO 7176-8:2014 and fatigue strengths Environmental management - Life cycle assessment - Requirements 169 ISO 14044:2006 and guidelines 170 IEC 62304:2006/Amd 1:2015 Medical device software - Software life cycle processes - Amendment 1 Geometrical product specifications (GPS) - Filtration - Part 22: Linear 171 ISO 16610-22:2015 profile filters: Spline filters 172 ISO 55001:2014 Asset management - Management systems - Requirements Safety of amusement rides and amusement devices - Part 1: Design 173 ISO 17842-1:2015 and manufacture Safety of amusement rides and amusement devices - Part 3: 174 ISO 17842-3:2015 Requirements for inspection during design, manufacture, operation and use