DOCSLIB.ORG

Andreas Degen

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Andreas Degen Andreas Degen Plattenfeld 2a ● 85244 Roehrmoos ● Germany ++49 – 160 – 9163-5114 ● [email protected] ● www.andreasdegen.de Main Accomplishments Designed and programmed a simulation to expose the functionality of the new developed Instrument Cluster (SL, SLK, etc.) to Dr. Zetsche Developed a 2 Electrode ECG-Amplifier circuit for an Activity Sensor to use for patient monitoring to increase the possibility to detect a my- ocardial infarction Implemented INTERBUS-S as a measurement system at the Mainzer Microtron and its spectrometers and also wrote the programming tools for the IT department to use INTERBUS-S Programmed an ERP-System for the Purchasing Department of the In- stitute of Nuclear Physics of the University of Mainz to increase the ef- ficiency of the Institute Employment History 01/2012 – current QC Engineer, Business Unit BMW ALPINE ELECTRONICS GmbH, Munich Responsible for the Product Quality of all Displays for BMW (SOP) Main point of contact for QM-Topics for customer Negotiation of the Year End Invoice with BMW warranty Control / release of the 8D-reports from China / Hungary plants Technologies: SPC, Automotive SPICE, Lotus Notes, B2B 09/2010 – 01/2011 Product Development Engineer Electronics (Interior) Kongsberg Automotive GmbH, Munich Design & Development of electronic hardware and software Active member of the new project introduction team being re- sponsible for the electronic application engineering Assist the plant quality and process engineering department Technologies: CANape, CANoe, VAS Andreas Degen Page 1 of 6 11/2007 – 08/2010 Resident Engineer Ruecker GmbH (CCE), Wiesbaden Working as a Software Resident Engineer for “Robert Bosch GmbH” at “Daimler AG” (Development of Instrument Cluster) Requirements-, Change- and Error Management Main point of contact for SW-Topics for customer Working in SW-Jour Fixe, SW-Meeting, Specification Review Assistance to the Software project manager and the Software developer team Enhancement of the CANoe Simulation (e.g. HMI) Quality Assurance Special Topics, t.b.d. by Software project manager Technologies: CANoe, CANdela, ClearCase, ClearQuest, HP Quality Center, DOORS, MS-Project, Automotive SPICE, AUTOSAR 07/2006 – 04/2007 Junior Software Engineer / Technician IT-Network ESG Elektroniksystem- und Logistik GmbH, Munich Construction of a helicopter simulator (NH90 & Tiger): Control and verification of the Simulator test-bench and the cor- responding trolleys Rebuild of a Tornado simulator: Creation of the Technical Construction drawings Retrofitting and controlling of the AFADTS ADLER II: Integration of Communication Systems (WAN/LAN) Assistance doing handover/takeover of ADLER systems Quality Assurance: Assistance of supervision for Integration at WTD81 Review & critique of Technical Handbooks and Documentation Design of new AutoCAD Templates using ISO 7200 (taking ISO 128, ISO 2768, ISO 13715 and ISO 16016 as a basic) Technologies: AutoCAD LT 2006, E³-Series Andreas Degen Page 2 of 6 12/2005 – 04/2006 Designing Engineer Actimon GmbH, Munich Limited to project length Project work: Development of an Activity Sensor for measuring physi- ological data during patient monitoring: Development of a 2 Electrode ECG – Amplifier circuit with ac- tive Notch and a Differential & Common-Mode Input filter Technologies: ARM7, INA321, AD8544, C/C++, Eagle 07/2004 – 10/2004 Designing Engineer Data Display AG, Germering Limited to project length Project work: Development of an USB – Display: Hard- and Software development, Simulation, Test Technologies: VHDL, CPLD, CoolRunner-II, CY7C68013 03/2004 – 05/2004 Designing Engineer BMW AG, Munich (via IQ Management GmbH, Nuremberg) Limited to project length Project work: Building of a GUI: Programming of the GUI which is able to program Airbag Computer Systems (with Database connectivity) Technologies: Visual C++, EDIABAS, SGBD, MS Access 01/2001 – 07/2003 Application Engineer / System- and Network Administrator CAESAR Datensysteme GmbH, Munich Working in different departments of “CAESAR Datensysteme”: Calibration, test and installation of Measurement Systems Hard- and Software system integration Concept and programming of test procedures Account Management and support in Systems Engineering Installation and support of company network Concept, design and programming of company website Technologies: Windows 2000-Server, Windows XP-2000, Active Directory, Linux, ADSL, μ-Edition, Apache, HTML, CSS, JavaScript Andreas Degen Page 3 of 6 08/1986 – 12/2000 Electronics Technician Institute of Nuclear Physics of the University of Mainz Responsible for transaction of Hard- and Software Projects done in Re- search and Development at the University: Development and documentation of Software, e.g.: 1. for remote control of “Foerstersonde” at RTM 3 2. for activation of DVM’s and oscilloscopes (measurement software for energy scanner at RTM 1) 3. for operation in “Wedlernetzgeraeten” (bipolar current source) 4. for operation in “HF xy-Lagemonitorsystem” 5. Design of INTERBUS-S programming tools Operation of microcontroller, e.g.: 1. Development and construction of a scanner controlling unit for operation at the polarized electron source 2. Assembly and programming of a LCD-triggering and limit control for “Getterpumpennetzgeraete” (SAB80C517/537) 3. Development of programs to work in “Wedlernet- zge-raete” and in “HF xy-Lagemonitorsystem” (Z80) Development of components for “Wedlernetzgeraete” of MAMI C (“Mainzer Microtron”), e.g.: 1. Development of test circuits for DAC 7644 2. Test assembly with power amplifier OPA 549 3. Simulation of bipolar current sources with PSpice Development of a PC ISA-bus card to emulate the CAMAC I/O Modules Circuit diagram entry and layout development with CADSTAR Service and repair of the “Wedlernetzgeraete” of MAMI A+B Consultation and support of the Master- and PhD Students of the national and international Collaborations Responsible for the IT-Equipment of the Electronic Laboratory Programming of an ERP-System for the Purchasing Department Quality Assurance: 1. Design of test plans and test equipment 2. Creation of the engineering documents 3. Creation of the Documentation for the Collaborations Technologies: Windows 2000-NT-98-3.11, SCO XENIX System V, MS-DOS, VMS, CP/M, Pascal, C/C++, Keil-C, Fortran, Assembler, Ba- sic, Algol, Xbase++, Clipper, dBaseII, HTML, CSS, JavaScript, Perl, PSpice, CADSTAR, Microcontroller, A/D-D/A Converter, Power Amplifier, INTERBUS-S, IEEE-Bus, VME-Bus, CA- MAC, analog and digital oscilloscopes, Signal generator, Multi- meter, programmable Current- and Voltage sources Andreas Degen Page 4 of 6 Part-Time work 11/2003 – 04/2004 Webmaster for the “Department of Biology I, Botany” of the ”Ludwig – Maximilians – Universität (LMU) Munich” Concept and programming of the “Endosymbiosis”– Homepage of Prof. Dr. Soll, Prof. Dr. Martin and Prof. Dr. Maier 07/2002 – 12/2002 Webmaster for the “Department of Biology I, Botany” of the ”Ludwig – Maximilians – Universität (LMU) Munich” Concept and programming of the Homepage of Prof. Dr. Soll and the “VW-Group” of Prof. Dr. Schleiff Education 03/1998 Intermediate Exam to Master’s Degree in electrical engineering 1992 – 1998 Study of electrical engineering at distance learning institute of Hagen 1974 – 1983 Secondary school: Abitur equivalent to High School Diploma Extended vocational training (partial list) 02/2020 VDA: 8D-Report Method 12/2019 VDA/AIAG: Training FMEA (Standard 2019) 02/2019 VDA: Schadteilanalyse Feld für Anwender/innen 02/2018 Haufe: Moderation Basic Training 10/2017 VDA QMC: Product Safety Representative (PSB) 06/2013 DGQ: Six Sigma +LEAN Yellow Belt 03/2013 Method Park: intacs™ Certified ISO/IEC 15504 Provisional Assessor (Automotive SPICE®) 01/2009 VDI: Leading of Project teams 11/2007 Vector Academy: CANoe Basics Workshop 04/2005 VDI: Innovative communication network for automation systems 10/2003 VDI: Project management for small- middle size Projects 01/2002 SuSE Linux Training: Network administration I Military Service 07/1985 – 09/1986 “Weitverkehrsfunker” in the “Fernmeldebataillon 6” of 6th “Panzer- grenadierdivision” in Neumünster (Rank: LCpl and Squad Leader) Andreas Degen Page 5 of 6 Skills summary Languages • English: Fluent (both spoken and written) • Chinese: Basic • French: Basic • German: Native speaker Project work • Project Leading, Project / Quality Management • Requirements-, Change- and Error Management Bus Systems • Automotive: CAN/LIN/MOST-Bus, Flexray • Field bus: INTERBUS-S, Profi-Bus • Measurement bus: CAMAC, VME, IEEE • Serial: USB, RS232, RS485, SPI, I²C Electrical • Analog and Digital Circuits engineering • Measurement and Controlling engineering • Embedded Systems programming (μP, CPLD, FPGA) • Test, verification and bug-tracking, documentation CAD • CADSTAR, Eagle, AutoCAD LT 2006, E³-Series Microprocessor • Z80, 8051, SAB80C517/537, C505L, CY7C68013, ARM7 Simulation • PSpice, VHDL EDV • Operating Systems: Linux, Unix, SCO XENIX System V, OS/2, VMS, Windows 7-XP-2000-NT-98-3.11, MS-DOS, CP/M • Languages: Pascal, C/C++, VC++, C#, VB, Fortran, Basic, Al- gol, Ada, Assembler, Xbase++, Clipper, dBaseII, Latex 2ε • Web: XML, HTML, CSS, Java/JavaScript, PHP/Perl, MySQL • Further knowledge in: UML 2, V-Model, SVN, CVS Network • CISCO ADSL Router: Installation and programming • Windows 2000 Server: DNS, DHCP, Active Directory • TCP/IP Wireless Network • Bluetooth, W-LAN Hardware • Installation of PC’s, Switch, Router, Printer, Software Hobbies • Language study travel (USA), photography, Chinese culture Andreas Degen Page 6 of 6.
Load more

Recommended publications
  • Iot4cps Deliverable
    IoT4CPS – Trustworthy IoT for CPS FFG - ICT of the Future Project No. 863129 Deliverable D5.1 Lifecycle Data Models for Smart Automotive and Smart Manufacturing Deliverable number: D5.1 Dissemination level: Public Delivery data: 13. June 2018 Editor: Violeta Damjanovic-Behrendt Author(s): Violeta Damjanovic-Behrendt (SRFG) Michaela Mühlberger (SRFG) Cristina de Luca (IFAT) Thomos Christos (IFAT) Reviewers: Heinz Weiskirchner (NOKIA) Edin Arnautovic (TTTech) The IoT4CPS project is partially funded by the “ICT of the Future” Program of the FFG and the BMVIT. The IoT4CPS Consortium: IoT4CPS – 863129 Lifecycle Data Models for Smart Automotive and Smart Manufacturing AIT – Austrian Institute of Technology GmbH AVL – AVL List GmbH DUK – Donau-Universität Krems IFAT – Infineon Technologies Austria AG JKU – JK Universität Linz / Institute for Pervasive Computing JR – Joanneum Research Forschungsgesellschaft mbH NOKIA – Nokia Solutions and Networks Österreich GmbH NXP – NXP Semiconductors Austria GmbH SBA – SBA Research GmbH SRFG – Salzburg Research Forschungsgesellschaft SCCH – Software Competence Center Hagenberg GmbH SAGÖ – Siemens AG Österreich TTTech – TTTech Computertechnik AG IAIK – TU Graz / Institute for Applied Information Processing and Communications ITI – TU Graz / Institute for Technical Informatics TUW – TU Wien / Institute of Computer Engineering XNET – X-Net Services GmbH Document Control Title: Lifecycle Data Models for Smart Automotive and Smart Manufacturing Type: Public Editor(s): Violeta Damjanovic-Behrendt Author(s): Violeta
    [Show full text]
  • Volumen 01 Anejos
    >Volumen 01 Anejos 2 VOLUMEN ANEJOS 01 anejo 01. Estado del Arte. Este anejo recoge información complementaria a los temas principales presentados en la tesis. Se profundiza en la definición del concepto del paisaje y de los estudios cienciométricos. Se realiza un profundo análisis de la legislación existente en materia de paisaje en todo el mundo. Además, se muestra la situación de la educación del paisaje en España. Y por último, se presenta el Proyecto OASIS, escenario del caso práctico de la tesis. anejo 02. Fuentes utilizadas en el proceso de normalización. Se muestra el listado de normas encontradas en el proceso de búsqueda de normativa existente en materia de paisaje. anejo 03. Desarrollo de los documentos normativos. Se muestra el proceso seguido para la realización de una propuesta de documento normativo para cada uno de los temas detectados como principales vacíos en materia de paisaje. anejo 04. Propuesta de Cruz Calleja como norma de terminología al GT13 paisaje CTN157 proyectos de AENOR. Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje. anejo 05. Propuesta de Cruz Calleja como norma de Estudios de Impacto e Integración Paísajística al GT13 paisaje CTN157 proyectos de AENOR. Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje. anejo 06. Propuesta de Cruz Calleja como norma de la profesión de arquitecto paisajista al GT13 paisaje CTN157 proyectos de AENOR.Se recogen los p Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje.
    [Show full text]
  • Development of Line Width and Type Control of 2D Cad Software Based on Iso Technical Drawing Standard
    UNIVERSITI PUTRA MALAYSIA DEVELOPMENT OF LINE WIDTH AND TYPE CONTROL OF 2D CAD SOFTWARE BASED ON ISO TECHNICAL DRAWING STANDARD PITOON NOPNAKORN FK 2003 44 DEVELOPMENT OF LINE WIDTH AND TYPE CONTROL OF 2D CAD SOFTWARE BASED ON ISO TECHNICAL DRAWING STANDARD By PITOON NOPNAKORN Thesis Submitted to the School of Graduate Studies, Universiti Putra Malaysia, in Fulfilmentof the Requirements for the Degree of Master of Science October 2003 DEDICATION To My Parents One who ever shared a moment of his love and one who has strived patiently fo r their beloved children 11 Abstract of the thesispresented to theSenate ofUniversiti Putra Malaysia in fulfilmentof the requirements fo r the degree of Master of Science DEVELOPMENT OF LINE WIDTH AND TYPE CONTROL OF 2D CAD SOFTWARE BASED ON ISO TECHNICAL DRAWING STANDARD By PITOON NOPNAKORN October 2003 Chairman: Associate Professor Napsiah Ismail, Ph.D. Faculty: Engineering Engineering drawing is the media of communication in manufacturing process. In order to communicate in the same graphic language in engineering, the technical drawing standard has been specified by the International Organization fo r Standardization (ISO). Some commercial CAD softwares such as AutoCAD, AutoSketch and Solid Edge provided high-end ability to work whether in 3D or 2D space. Their width, length and proportion of printed lines conform to the ISO Technical Drawing Standard. But the procedures and interface to create line width and line type fo r simple drawing are sometime tedious and complex. The aim of this research work is to develop a 2D CAD software with emphasize on line width and line type control based on the ISO technical drawing standard fo r technical drawing.
    [Show full text]
  • Change and Exchange Electronic Document Management in Building Design
    Kurt Löwnertz Change and Exchange Electronic document management in building design Licentiate thesis Construction Management and Economics Royal Institute of Technology Stockholm, Sweden 1998 Construction Informatics Digital Library http://itc.scix.net/ paper fea8.content.05940 1 2 ABSTRACT Producing documents using computer supported methods has become common practice in the construction industry, but the management of documents is still to a large degree done with manual methods. Some pioneering users in design, construction and facility management respectively have applied electronic document management (EDM) within their organisations or for projects. How- ever, the introduction has hitherto been noticeably slow. This thesis discusses the benefits of the new document management techniques to the construction and facility management process, with focus on building de- sign, as well as the obstacles when implementing these techniques. The con- struction sector process has some particular properties, differing from other in- dustry sectors, in that a project organisation is formed anew for each project and involves a number of specialists with varying requirements for their company- internal production and management of documents. The main themes for EDM in building design are therefore how to manage the change of information and the exchange or sharing of information between the different organisations. The thesis contains a state-of-the-art description of document management in building design, including reviews of commercial applications, standards and current best practice. Basic techniques on a scale from file-hierarchy-based to product-model-based systems are classified and analysed from a building design perspective. Five cases of document management in practice have been studied.
    [Show full text]
  • Development of a New Drawing System for STS
    School of Innovation, Design and Engineering BACHELOR THESIS IN AERONAUTICAL ENGINEERING 15 CREDITS, BASIC LEVEL 300 Development of a new drawing system for STS Authors: Mikael Berkelund and Christian Håkonsen Report code: MDH.IDT.FLYG.0189.2008.GN300.15HP.D. Abstract An engineering firm which handles and constructs drawings needs well defined routines and structures which should be homogeneous through all the different departments. A common drawing system results in better quality and cooperation between the departments. SAS Technical Services (STS) did not have a common drawing system which had led to development of different routines in the different regions and departments. Requested was development of new routines regarding engineering drawings, such as drawing numbering structure, revision and subscription routines, which standards to adhere to, custom made drawing templates and management of the drawings with belonging documents. Each requested task was broken into minor tasks and analyzed. Solutions by different leading engineering companies were used for comparison and ideas. All the tasks were collected and organized in one single document which is the result of the thesis; a drawing instruction. The drawing instruction will after a learning phase ease the work for the STS engineers as all necessary information can be found in one single place. Also, work with contractors will be time-saving as the instruction can be handed out for guidance. Date: 29 jan 2008 Carried out at: SAS Technical Services Advisor at MDH: Tommy Nygren Advisor at SAS Technical Services: Anders Pramler Examinator: Gustaf Enebog II Sammanfattning En ingenjörsfirma som hanterar och skapar mängder med ritningar behöver väldefinierade rutiner och strukturer som är homogena genom hela bolaget.
    [Show full text]
  • Industrial Automation
    ISO Focus The Magazine of the International Organization for Standardization Volume 4, No. 12, December 2007, ISSN 1729-8709 Industrial automation • Volvo’s use of ISO standards • A new generation of watches Contents 1 Comment Alain Digeon, Chair of ISO/TC 184, Industrial automation systems and integration, starting January 2008 2 World Scene Highlights of events from around the world 3 ISO Scene Highlights of news and developments from ISO members 4 Guest View ISO Focus is published 11 times Katarina Lindström, Senior Vice-President, a year (single issue : July-August). It is available in English. Head of Manufacturing in Volvo Powertrain and Chairman of the Manufacturing, Key Technology Committee Annual subscription 158 Swiss Francs Individual copies 16 Swiss Francs 8 Main Focus Publisher • Product data – ISO Central Secretariat Managing (International Organization for information through Standardization) the lifecycle 1, ch. de la Voie-Creuse CH-1211 Genève 20 • Practical business Switzerland solutions for ontology Telephone + 41 22 749 01 11 data exchange Fax + 41 22 733 34 30 • Modelling the E-mail [email protected] manufacturing enterprise Web www.iso.org • Improving productivity Manager : Roger Frost with interoperability Editor : Elizabeth Gasiorowski-Denis • Towards integrated Assistant Editor : Maria Lazarte manufacturing solutions Artwork : Pascal Krieger and • A new model for machine data transfer Pierre Granier • The revolution in engineering drawings – Product definition ISO Update : Dominique Chevaux data sets Subscription enquiries : Sonia Rosas Friot • A new era for cutting tools ISO Central Secretariat • Robots – In industry and beyond Telephone + 41 22 749 03 36 Fax + 41 22 749 09 47 37 Developments and Initiatives E-mail [email protected] • A new generation of watches to meet consumer expectations © ISO, 2007.
    [Show full text]
  • Isoupdate May 2019
    ISO Update Supplement to ISOfocus May 2019 International Standards in process ISO/CD Agricultural machinery and tractors — Re- 22172-2 pair and maintenance information — Part 2: An International Standard is the result of an agreement between Diagnostics the member bodies of ISO. A first important step towards an Interna- ISO/CD 23130 Milking and cooling machine installa- tional Standard takes the form of a committee draft (CD) - this is cir- tions — Monitoring device for cooling tanks culated for study within an ISO technical committee. When consensus — Requirements has been reached within the technical committee, the document is ISO/CD 11839 Machinery for forestry — Glazing and panel sent to the Central Secretariat for processing as a draft International materials used in operator enclosures for Standard (DIS). The DIS requires approval by at least 75 % of the protection against thrown sawteeth — Test member bodies casting a vote. A confirmation vote is subsequently method and performance criteria carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD Agricultural and forestry machinery — Safety 11806-1 requirements and testing for portable, hand- held, powered brush-cutters and grass-trim- mers — Part 1: Machines fitted with an integral combustion engine ISO/CD Agricultural and forestry machinery — Safety 11806-2 requirements and testing for portable, hand- held, powered brush-cutters and grass- trimmers — Part 2: Machines for use with CD registered back-pack power unit TC 31 Tyres, rims and valves ISO/CD 3739-1 Industrial tyres and rims — Part 1: Pneumatic Period from 01 April to 30 April 2019 tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and These documents are currently under consideration in the technical marking committee.
    [Show full text]
  • ISO 7200:2004 4E96ffda6041/Iso-7200-2004
    INTERNATIONAL ISO STANDARD 7200 Second edition 2004-02-15 Technical product documentation — Data fields in title blocks and document headers Documentation technique de produits — Champs de données dans les cartouches d'inscription et têtes de documents iTeh ST ANDARD PREVIEW (standards.iteh.ai) ISO 7200:2004 https://standards.iteh.ai/catalog/standards/sist/cda0743a-d12c-45c6-87fd- 4e96ffda6041/iso-7200-2004 Reference number ISO 7200:2004(E) © ISO 2004 ISO 7200:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 7200:2004 https://standards.iteh.ai/catalog/standards/sist/cda0743a-d12c-45c6-87fd- 4e96ffda6041/iso-7200-2004 © ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • List of Indian Standards
    1 INDIAN STANDARDS LIST RELATED TO BUILDING CONSTRUCTION, MANAGEMENT AND QUALITY CONTROL SP 1:-1967 Comparison of Indian and Overseas Standards on Aluminum Alloy Castings SP 2 : 1982 Comparison of Indian and Overseas Basic Sizes for Sheet and Wire SP 4 : 1970 Metric Change in India SP 6 : Part 1 : 1964 Handbook for structural engineers - Structural steel sections SP 6 : Part 2 : 1962 Handbook For Structural Engineers - 2 : Steel Beams and Plate Girders SP 6 : Part 3 : 1962 Handbook Structural Engineers - Part 3 : Steel Columns and Struts SP 6: Part 4: 1969 ISI Handbook for Structural Engineers 4. Use of High Strength Friction Grip Bolts SP 6 : Part 5 : 1980 Handbook for structural engineers - Cold-formed, light gauge steel structures SP 6 : Part 6 : 1972 Handbook for structural engineers - Application of plastic theory in design of steel structures SP 6 : Part 7 : 1972 ISI Handbook for Structural Engineers - Part 7 : Simple Welded Girders SP 7 : 1983 National building code of India 1983 SP 8 : 1970 ISI Handbook of Mathematical, Physical, Chemical and Engineering Tables SP 10 : 1975 Nomograms for Thickness of Masonry Walls SP 14 : 1976 Index to Steel Designations SP 16 : 1980 Design Aids for Reinforced Concrete to IS 456 : 1978 SP 17 : 1979 Index to IS 1956 Glossary of Terms Relating to Iron and Steel SP 20 (S and T) : 1991 Handbook on Masonry Design and Construction SP 21 (S and T) : 1983 Summaries of Indian Standards for Building Materials SP 22 : 1982 Explanatory Handbook on Codes for Earthquake Engineering SP 23 : 1982 Handbook on
    [Show full text]
  • NFPA 79 Technical Committee on Electrical Equipment of Industrial
    NFPA 79 Technical Committee on Electrical Equipment of Industrial Machinery First Draft Meeting Agenda (F2020) March 4 – 8, 2019 Hampton Inn & Suites Savannah Historic District Savannah, GA 1. Call to Order, Chair 2. Introductions 3. Approval of Previous Meeting Minutes (Attachment A) 4. Staff Updates, NFPA Staff Committee membership update (Attachment B) Fall 2020 revision cycle schedule (Attachment C) Overview of NFPA Process 5. Review of Public Inputs (Attachment D) 6. Address the re-write of Chapter 5 7. Old Business 8. New Business 9. Schedule Second Draft Meeting 10. Adjourn. Page 1 of 137 Attachment A: Previous Meeting Minutes Page 2 of 137 NFPA 79 Technical Committee on Electrical Standard for Industrial Machinery Second Draft Minutes January 16 - 18, 2017 New Orleans Arts Hotel New Orleans, Louisiana 70130 Minutes Item 17-1-1, Call to Order The meeting of the Technical Committee on Electrical Standard for Industrial Machinery was called to order by Chairman, Mark Hilbert at 1:00 PM on Monday, January 16, 2017 at the Renaissance New Orleans Arts Hotel located at 700 Tchoupitoulas St., New Orleans, LA 70130. Item 17-1-2, NFPA staff review of fire alarm and exit procedures Item 17-1-3, Introduction of Members and Guests In addition to the Chair, the following Technical Committee members were present: See the attached attendance sheet Guests in attendance during all or part of the meeting: See the attached attendance sheet The Chair opened the meeting with welcoming remarks. Self-introductions of meeting attendees and guests were conducted. Item 17-1-4, Review of Meeting Procedures and Revision Schedule Staff liaison Mark Cloutier explained meeting procedures, new terminology, permitted actions the committee can take on public comments, reviewed Terra system and reviewed the revision schedule to the committee.
    [Show full text]
  • International Standard Iso 128-1:2020(E)
    INTERNATIONAL ISO STANDARD 128-1 Second edition 2020-05 Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental iTeh STrequirementsANDARD PREVIEW Documentation technique de produits (TPD) — Principes généraux de (streprésentationandards —.iteh.ai) PartieI S1:O Introduction 128-1:2020 et exigences fondamentales https://standards.iteh.ai/catalog/standards/sist/62506fd1-da5a-4ce9-ba04- 890d8478a389/iso-128-1-2020 Reference number ISO 128-1:2020(E) © ISO 2020 ISO 128-1:2020(E) iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 128-1:2020 https://standards.iteh.ai/catalog/standards/sist/62506fd1-da5a-4ce9-ba04- 890d8478a389/iso-128-1-2020 COPYRIGHT PROTECTED DOCUMENT © ISO 2020 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address belowCP 401or ISO’s • Ch. member de Blandonnet body in 8 the country of the requester. ISO copyright office Phone: +41 22 749 01 11 CH-1214 Vernier, Geneva Fax:Website: +41 22www.iso.org 749 09 47 PublishedEmail: [email protected] Switzerland ii © ISO 2020 – All rights reserved ISO 128-1:2020(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv
    [Show full text]
  • Industrial Communication SIMATIC
    Kap_04_Titel_en.fm Seite 1 Freitag, 29. Januar 2010 9:53 09 © Siemens AG 2010 PROFIBUS 4/2 System interfacing for PG/PC 4/2 Overview 4/5 CP 5603 4/11 CP 5623 4/17 CP 5624 4/23 CP 5711 4/28 Industrial controls – Motor starters for operation in the field, high degree of protection Sec.6 SIRIUS M200D motor starters General data 4/28 M200D motor starters for PROFIBUS / PROFINET 4/32 M200D motor starters for PROFIBUS / PROFINET Communication modules, motor starter modules Sec.6 Accessories 4/33 SIRIUS 3RK3 Modular Safety System 4/33 General data 4/35 Central modules, expansion modules, interface modules, operating and monitoring modules 4/36 Accessories 4/37 Software Modular Safety System ES 4/40 Power Management System 4/40 System overview 4/41 SENTRON multifunction measuring instruments General data 4/45 PAC3100 multifunction measuring instruments 4/46 PAC3200 multifunction measuring instruments 4/47 PAC4200 multifunction measuring instruments 4/48 PAC PROFIBUS DP expansion modules 4/49 PAC RS485 expansion modules 4/50 PAC 4DI/2DO expansion modules for PAC4200 4/51 Configuring, Visualizing and Controlling with SIMATIC 4/51 SIMATIC PCS 7 powerrate 4/53 SIMATIC WinCC powerrate 4/55 SIMATIC PCS 7 Library PAC3200 4/56 3WL/3VL function block library for SIMATIC PCS 7 4/57 PAC3200 function block library for SIMATIC WinCC 4/58 Configuring, Visualizing and Controlling with SENTRON 4/58 Switch ES Power 4/59 SIMATIC FS600 laser scanner 4/59 PROFIsafe laser scanner Siemens IK PI News · January 2010 Kap_04_en.fm Seite 2 Freitag, 29.
    [Show full text]