DOCSLIB.ORG

List of Indian Standards

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
List of Indian Standards 1 INDIAN STANDARDS LIST RELATED TO BUILDING CONSTRUCTION, MANAGEMENT AND QUALITY CONTROL SP 1:-1967 Comparison of Indian and Overseas Standards on Aluminum Alloy Castings SP 2 : 1982 Comparison of Indian and Overseas Basic Sizes for Sheet and Wire SP 4 : 1970 Metric Change in India SP 6 : Part 1 : 1964 Handbook for structural engineers - Structural steel sections SP 6 : Part 2 : 1962 Handbook For Structural Engineers - 2 : Steel Beams and Plate Girders SP 6 : Part 3 : 1962 Handbook Structural Engineers - Part 3 : Steel Columns and Struts SP 6: Part 4: 1969 ISI Handbook for Structural Engineers 4. Use of High Strength Friction Grip Bolts SP 6 : Part 5 : 1980 Handbook for structural engineers - Cold-formed, light gauge steel structures SP 6 : Part 6 : 1972 Handbook for structural engineers - Application of plastic theory in design of steel structures SP 6 : Part 7 : 1972 ISI Handbook for Structural Engineers - Part 7 : Simple Welded Girders SP 7 : 1983 National building code of India 1983 SP 8 : 1970 ISI Handbook of Mathematical, Physical, Chemical and Engineering Tables SP 10 : 1975 Nomograms for Thickness of Masonry Walls SP 14 : 1976 Index to Steel Designations SP 16 : 1980 Design Aids for Reinforced Concrete to IS 456 : 1978 SP 17 : 1979 Index to IS 1956 Glossary of Terms Relating to Iron and Steel SP 20 (S and T) : 1991 Handbook on Masonry Design and Construction SP 21 (S and T) : 1983 Summaries of Indian Standards for Building Materials SP 22 : 1982 Explanatory Handbook on Codes for Earthquake Engineering SP 23 : 1982 Handbook on Concrete Mixes SP 24 (S and T) : 1983 Explanatory Handbook on Indian Standard Code of Practice for Plain and Reinforced Concrete SP 25 : 1984 Handbook on Causes and Prevention of Cracks in Buildings SP 27 : 1987 Handbook on method of measurement of buildings works SP 30 : 1985 Special Publication - National Electrical Code SP 32 : 1986 Handbook on Functional Requirements of Industrial Buildings (Lighting and Ventilation) SP 33 : 1986 Handbook on Timber Engineering SP 34 : 1987 Handbook on Concrete Reinforcement and Detailing SP 35 : 1987 Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing) SP 36 : Part 1 : 1987 Compendium of Indian standards on soil engineering: Part 1 Laboratory testing of soils for civil engineering purposes SP 36 : Part 2 : 1988 Compendium of Indian standards on soil engineering: Part 2 Field testing SP 38 (S and T) : 1987 Handbook of Typified Designs for Structures with Steel Roof Trusses (with and without Cranes) (Based on is Codes) SP 40 (S and T) : 1987 Handbook on Structures with Steel Portal Frames SP 41 (S and T) : 1987 Handbook on Functional Requirements of Buildings (Other than Industrial Buildings) SP 43 (S and T) : 1987 Handbook on Structures with Reinforced Concrete Portal Frames (Without Cranes) SP 46 : 2003 Engineering Drawing Practice for Schools and Colleges SP 47 (S and T) : 1988 Handbook on Structures with Steel Lattice Portal Frames (Without Cranes) SP 57 (QAWSM) : 1993 Handbook on Pipes and Fittings for Drinking Water Supply SP 58 : 1995 Handbook on Pumps for Drinking Water Supply SP 60 : 1993 Guidelines for Competence, Acceptance and Accreditation of Laboratories, Inspection Bodies, Certification Bodies and Systems of Certification SP 62 (S and T) : 1997 Handbook on Building Construction Practices (Excluding Electrical Work) SP 63 : 1997 Explanatory guide for the application of quality system standards (IS/ISO 9001, 9002 and 9003) SP 64 (S & T) : 2001 Explanatory Handbook on Indian Standard Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures SP 65 : 1998 Handbook on IS/ISO 9000 for Small Businesses SP 67 : 2000 Guidelines for Managing the Economics of Quality SP 68 : 2000 Guidance on Statistical Techniques for ISO 9001 : 1994 SP 69 : 2000 Banking and Related Financial Services - Information Security Guidelines SP 70 : 2001 Handbook on Construction Safety Practices SP 1650 : 1993 Standard colours for building and decorative finishes IS 1 : 1968 Specification for the national flag of India (cotton khadi) IS 2 : 1960 Rules for rounding off numerical values IS 4 : 1963 Guide for Layout of Learned Periodicals 2 IS 5 : 1994 Colours for ready mixed paints and enamels IS 12 : 1988 Guide for Drafting and Presentation of Indian Standard IS 35 : 1975 Specification for zinc oxide for paints IS 195 : 1991 Fireclay Mortar for Laying Fireclay Refractory Bricks - Specification IS 269 : 1989 Specification for 33 grade ordinary Portland cement IS 277 : 2003 Galvanized Steel Sheets, (Plain and Corrugated) - Specification IS 278 : 1978 Specification for Galvanized Steel Barbed Wire for Fencing IS 287 : 1993 Permissible Moisture Content for Timber Used for Different Purposes - Recommendations IS 303 : 1989 Specification for plywood for general purposes IS 383 : 1970 Specification for coarse and fine aggregates from natural sources for concrete IS 399 : 1963 Classification of Commercial Timbers and Their Zonal Distribution IS 401 : 2001 Preservation of Timber - Code of Practice IS 427 : 1965 Specification for distemper, dry, colour as required IS 428 : 2000 Washable Distemper - Specification IS 432 : Part 1 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement: Part I Mild steel and medium tensile steel bars IS 432 : Part 2 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement: Part 2 Hard- drawn steel wire IS 455 : 1989 Specification for Portland slag cement IS 456 : 2000 Plain and Reinforced Concrete - Code of Practice IS 457 : 1957 Code of practice for general construction of plain and reinforced concrete for dams and other massive structures IS 459 : 1992 Indian Standard Corrugated and semi-corrugated asbestos cement sheets - Specification IS 516 : 1959 Method of test for`strength of concrete IS 524 : 1983 Specification for Varnish, Finishing, Exterior, Air-drying IS 525 : 1968 Specification for Varnish, Finishing, Exterior and General Purposes IS 650 : 1991 Specification for standard sand for testing of cement IS 654 : 1992 Specification for clay roofing tiles, Mangalore pattern IS 655 : 1963 Specification for Metal Air Ducts IS 656 : 1988 Specification for logs for plywood IS 659 : 1964 Safety code for air conditioning IS 707 : 1976 Glossary of terms applicable to timber technology and utilization IS 712 : 1984 Specification for building limes IS 732 : 1989 Code of Practice for Electrical Wiring Installations IS 771 : Part 1 : 1979 Specification for glazed fire-clay sanitary appliances: Part 1 General requirements IS 771 : Part 2 : 1985 Specification for glazed fire-clay sanitary appliances: Part 2 Specific requirements of kitchen and laboratory sinks IS 771 : Part 3 : Sec 1 : 1979 Specification for glazed fire clay sanitary appliances : Part 3 Specific requirements of urinals, Section 1 Slab urinals IS 771 : Part 3 : Sec 2 : 1985 Specification for glazed fire-clay sanitary appliances: Part 3 Specific requirements of urinals: Section 2 Stall urinals IS 771 : Part 4 : 1979 Specification for glazed fire-clay sanitary appliances: Part 4 Specific requirements of postmortem slabs IS 771 : Part V : 1979 Specification for Glazed Fire-clay Sanitary Appliances - Part V : Specific Requirements of Shower Trays IS 771 : Part VI : 1979 Specification for Glazed Fire-clay Sanitary Appliances - Part VI : Specific Requirements of Bed Pan Sinks IS 771 : Part 7 : 1981 Specification for glazed fire-clay sanitary appliances: Part 7 Specific requirements of slop sinks IS 772 : 1973 Specification for general requirements for enamelled cast iron sanitary appliances IS 783 : 1985 Code of practice for laying of concrete pipes IS 784 : 2001 Prestressed Concrete Pipes (Including Fittings) - Specification IS 786 : 1967 Conversion Factors and Conversion Tables IS 787 : 1956 Guide for inter conversion of values from one system of units to another IS 800 : 1984 Code of practice for general construction in steel IS 801 : 1975 Code of practice for use of cold formed light gauge steel structural members in general building construction IS 806 : 1968 Code of practice for use of steel tubes in general building construction IS 808 : 1989 Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections IS 809 : 1992 Specification for rubber flooring materials for general purposes IS 811 : 1987 Cold formed light gauge structural steel sections IS 816 : 1969 Code of practice for use of metal arc welding for general construction in mild steel IS 817 : 1966 Code of practice for training and testing of metal arc welders IS 848 : 1974 Specification for Synthetic Resin Adhesives for Plywood (Phenolic and Aminoplastic) IS 851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood IS 875 : Part 1 : 1987 Code of practice for design loads (other than earthquake)for buildings and structures Part 1 Dead loads - Unit weights of 3 building material and stored materials (Incorporating IS:1911-1967) IS 875 : Part 2 : 1987 Code of practice for design loads (other than earthquake) for buildings and structures: Part 2 Imposed loads IS 875 : Part 3 : 1987 Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures - Part 3 : Wind Loads IS 875 : Part 4 : 1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 4 Snow loads IS 875 : Part 5 : 1987 Code of practice for design loads (other than earthquake) for buildings and structures
Load more

Recommended publications
  • Volumen 01 Anejos
    >Volumen 01 Anejos 2 VOLUMEN ANEJOS 01 anejo 01. Estado del Arte. Este anejo recoge información complementaria a los temas principales presentados en la tesis. Se profundiza en la definición del concepto del paisaje y de los estudios cienciométricos. Se realiza un profundo análisis de la legislación existente en materia de paisaje en todo el mundo. Además, se muestra la situación de la educación del paisaje en España. Y por último, se presenta el Proyecto OASIS, escenario del caso práctico de la tesis. anejo 02. Fuentes utilizadas en el proceso de normalización. Se muestra el listado de normas encontradas en el proceso de búsqueda de normativa existente en materia de paisaje. anejo 03. Desarrollo de los documentos normativos. Se muestra el proceso seguido para la realización de una propuesta de documento normativo para cada uno de los temas detectados como principales vacíos en materia de paisaje. anejo 04. Propuesta de Cruz Calleja como norma de terminología al GT13 paisaje CTN157 proyectos de AENOR. Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje. anejo 05. Propuesta de Cruz Calleja como norma de Estudios de Impacto e Integración Paísajística al GT13 paisaje CTN157 proyectos de AENOR. Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje. anejo 06. Propuesta de Cruz Calleja como norma de la profesión de arquitecto paisajista al GT13 paisaje CTN157 proyectos de AENOR.Se recogen los p Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje.
    [Show full text]
  • Change and Exchange Electronic Document Management in Building Design
    Kurt Löwnertz Change and Exchange Electronic document management in building design Licentiate thesis Construction Management and Economics Royal Institute of Technology Stockholm, Sweden 1998 Construction Informatics Digital Library http://itc.scix.net/ paper fea8.content.05940 1 2 ABSTRACT Producing documents using computer supported methods has become common practice in the construction industry, but the management of documents is still to a large degree done with manual methods. Some pioneering users in design, construction and facility management respectively have applied electronic document management (EDM) within their organisations or for projects. How- ever, the introduction has hitherto been noticeably slow. This thesis discusses the benefits of the new document management techniques to the construction and facility management process, with focus on building de- sign, as well as the obstacles when implementing these techniques. The con- struction sector process has some particular properties, differing from other in- dustry sectors, in that a project organisation is formed anew for each project and involves a number of specialists with varying requirements for their company- internal production and management of documents. The main themes for EDM in building design are therefore how to manage the change of information and the exchange or sharing of information between the different organisations. The thesis contains a state-of-the-art description of document management in building design, including reviews of commercial applications, standards and current best practice. Basic techniques on a scale from file-hierarchy-based to product-model-based systems are classified and analysed from a building design perspective. Five cases of document management in practice have been studied.
    [Show full text]
  • Isoupdate May 2019
    ISO Update Supplement to ISOfocus May 2019 International Standards in process ISO/CD Agricultural machinery and tractors — Re- 22172-2 pair and maintenance information — Part 2: An International Standard is the result of an agreement between Diagnostics the member bodies of ISO. A first important step towards an Interna- ISO/CD 23130 Milking and cooling machine installa- tional Standard takes the form of a committee draft (CD) - this is cir- tions — Monitoring device for cooling tanks culated for study within an ISO technical committee. When consensus — Requirements has been reached within the technical committee, the document is ISO/CD 11839 Machinery for forestry — Glazing and panel sent to the Central Secretariat for processing as a draft International materials used in operator enclosures for Standard (DIS). The DIS requires approval by at least 75 % of the protection against thrown sawteeth — Test member bodies casting a vote. A confirmation vote is subsequently method and performance criteria carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD Agricultural and forestry machinery — Safety 11806-1 requirements and testing for portable, hand- held, powered brush-cutters and grass-trim- mers — Part 1: Machines fitted with an integral combustion engine ISO/CD Agricultural and forestry machinery — Safety 11806-2 requirements and testing for portable, hand- held, powered brush-cutters and grass- trimmers — Part 2: Machines for use with CD registered back-pack power unit TC 31 Tyres, rims and valves ISO/CD 3739-1 Industrial tyres and rims — Part 1: Pneumatic Period from 01 April to 30 April 2019 tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and These documents are currently under consideration in the technical marking committee.
    [Show full text]
  • Andreas Degen
    Andreas Degen Plattenfeld 2a ● 85244 Roehrmoos ● Germany ++49 – 160 – 9163-5114 ● [email protected] ● www.andreasdegen.de Main Accomplishments Designed and programmed a simulation to expose the functionality of the new developed Instrument Cluster (SL, SLK, etc.) to Dr. Zetsche Developed a 2 Electrode ECG-Amplifier circuit for an Activity Sensor to use for patient monitoring to increase the possibility to detect a my- ocardial infarction Implemented INTERBUS-S as a measurement system at the Mainzer Microtron and its spectrometers and also wrote the programming tools for the IT department to use INTERBUS-S Programmed an ERP-System for the Purchasing Department of the In- stitute of Nuclear Physics of the University of Mainz to increase the ef- ficiency of the Institute Employment History 01/2012 – current QC Engineer, Business Unit BMW ALPINE ELECTRONICS GmbH, Munich Responsible for the Product Quality of all Displays for BMW (SOP) Main point of contact for QM-Topics for customer Negotiation of the Year End Invoice with BMW warranty Control / release of the 8D-reports from China / Hungary plants Technologies: SPC, Automotive SPICE, Lotus Notes, B2B 09/2010 – 01/2011 Product Development Engineer Electronics (Interior) Kongsberg Automotive GmbH, Munich Design & Development of electronic hardware and software Active member of the new project introduction team being re- sponsible for the electronic application engineering Assist the plant quality and process engineering department Technologies: CANape, CANoe, VAS Andreas Degen Page 1 of 6 11/2007 – 08/2010 Resident Engineer Ruecker GmbH (CCE), Wiesbaden Working as a Software Resident Engineer for “Robert Bosch GmbH” at “Daimler AG” (Development of Instrument Cluster) Requirements-, Change- and Error Management Main point of contact for SW-Topics for customer Working in SW-Jour Fixe, SW-Meeting, Specification Review Assistance to the Software project manager and the Software developer team Enhancement of the CANoe Simulation (e.g.
    [Show full text]
  • ISO 7200:2004 4E96ffda6041/Iso-7200-2004
    INTERNATIONAL ISO STANDARD 7200 Second edition 2004-02-15 Technical product documentation — Data fields in title blocks and document headers Documentation technique de produits — Champs de données dans les cartouches d'inscription et têtes de documents iTeh ST ANDARD PREVIEW (standards.iteh.ai) ISO 7200:2004 https://standards.iteh.ai/catalog/standards/sist/cda0743a-d12c-45c6-87fd- 4e96ffda6041/iso-7200-2004 Reference number ISO 7200:2004(E) © ISO 2004 ISO 7200:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 7200:2004 https://standards.iteh.ai/catalog/standards/sist/cda0743a-d12c-45c6-87fd- 4e96ffda6041/iso-7200-2004 © ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • NFPA 79 Technical Committee on Electrical Equipment of Industrial
    NFPA 79 Technical Committee on Electrical Equipment of Industrial Machinery First Draft Meeting Agenda (F2020) March 4 – 8, 2019 Hampton Inn & Suites Savannah Historic District Savannah, GA 1. Call to Order, Chair 2. Introductions 3. Approval of Previous Meeting Minutes (Attachment A) 4. Staff Updates, NFPA Staff Committee membership update (Attachment B) Fall 2020 revision cycle schedule (Attachment C) Overview of NFPA Process 5. Review of Public Inputs (Attachment D) 6. Address the re-write of Chapter 5 7. Old Business 8. New Business 9. Schedule Second Draft Meeting 10. Adjourn. Page 1 of 137 Attachment A: Previous Meeting Minutes Page 2 of 137 NFPA 79 Technical Committee on Electrical Standard for Industrial Machinery Second Draft Minutes January 16 - 18, 2017 New Orleans Arts Hotel New Orleans, Louisiana 70130 Minutes Item 17-1-1, Call to Order The meeting of the Technical Committee on Electrical Standard for Industrial Machinery was called to order by Chairman, Mark Hilbert at 1:00 PM on Monday, January 16, 2017 at the Renaissance New Orleans Arts Hotel located at 700 Tchoupitoulas St., New Orleans, LA 70130. Item 17-1-2, NFPA staff review of fire alarm and exit procedures Item 17-1-3, Introduction of Members and Guests In addition to the Chair, the following Technical Committee members were present: See the attached attendance sheet Guests in attendance during all or part of the meeting: See the attached attendance sheet The Chair opened the meeting with welcoming remarks. Self-introductions of meeting attendees and guests were conducted. Item 17-1-4, Review of Meeting Procedures and Revision Schedule Staff liaison Mark Cloutier explained meeting procedures, new terminology, permitted actions the committee can take on public comments, reviewed Terra system and reviewed the revision schedule to the committee.
    [Show full text]
  • International Standard Iso 128-1:2020(E)
    INTERNATIONAL ISO STANDARD 128-1 Second edition 2020-05 Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental iTeh STrequirementsANDARD PREVIEW Documentation technique de produits (TPD) — Principes généraux de (streprésentationandards —.iteh.ai) PartieI S1:O Introduction 128-1:2020 et exigences fondamentales https://standards.iteh.ai/catalog/standards/sist/62506fd1-da5a-4ce9-ba04- 890d8478a389/iso-128-1-2020 Reference number ISO 128-1:2020(E) © ISO 2020 ISO 128-1:2020(E) iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 128-1:2020 https://standards.iteh.ai/catalog/standards/sist/62506fd1-da5a-4ce9-ba04- 890d8478a389/iso-128-1-2020 COPYRIGHT PROTECTED DOCUMENT © ISO 2020 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address belowCP 401or ISO’s • Ch. member de Blandonnet body in 8 the country of the requester. ISO copyright office Phone: +41 22 749 01 11 CH-1214 Vernier, Geneva Fax:Website: +41 22www.iso.org 749 09 47 PublishedEmail: [email protected] Switzerland ii © ISO 2020 – All rights reserved ISO 128-1:2020(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv
    [Show full text]
  • Industrial Communication SIMATIC
    Kap_04_Titel_en.fm Seite 1 Freitag, 29. Januar 2010 9:53 09 © Siemens AG 2010 PROFIBUS 4/2 System interfacing for PG/PC 4/2 Overview 4/5 CP 5603 4/11 CP 5623 4/17 CP 5624 4/23 CP 5711 4/28 Industrial controls – Motor starters for operation in the field, high degree of protection Sec.6 SIRIUS M200D motor starters General data 4/28 M200D motor starters for PROFIBUS / PROFINET 4/32 M200D motor starters for PROFIBUS / PROFINET Communication modules, motor starter modules Sec.6 Accessories 4/33 SIRIUS 3RK3 Modular Safety System 4/33 General data 4/35 Central modules, expansion modules, interface modules, operating and monitoring modules 4/36 Accessories 4/37 Software Modular Safety System ES 4/40 Power Management System 4/40 System overview 4/41 SENTRON multifunction measuring instruments General data 4/45 PAC3100 multifunction measuring instruments 4/46 PAC3200 multifunction measuring instruments 4/47 PAC4200 multifunction measuring instruments 4/48 PAC PROFIBUS DP expansion modules 4/49 PAC RS485 expansion modules 4/50 PAC 4DI/2DO expansion modules for PAC4200 4/51 Configuring, Visualizing and Controlling with SIMATIC 4/51 SIMATIC PCS 7 powerrate 4/53 SIMATIC WinCC powerrate 4/55 SIMATIC PCS 7 Library PAC3200 4/56 3WL/3VL function block library for SIMATIC PCS 7 4/57 PAC3200 function block library for SIMATIC WinCC 4/58 Configuring, Visualizing and Controlling with SENTRON 4/58 Switch ES Power 4/59 SIMATIC FS600 laser scanner 4/59 PROFIsafe laser scanner Siemens IK PI News · January 2010 Kap_04_en.fm Seite 2 Freitag, 29.
    [Show full text]
  • Delivery of Technical Records
    GDF SUEZ Energie Deutschland AG Policy Delivery of Technical Records Delivery of Technical Records GDF SUEZ Energie Deutschland AG Version: 1.0 06.10.2014 External GDF SUEZ Energie Deutschland AG Policy Delivery of Technical Record Versions and change history Version Date Author Status & Change V0.0 19.07.2013 Uta Thiel Approve for using MMM V1.0 06.10.2014 Uta Thiel Actualization and adaption point 3.1.4. file format Document release Author Ressort Approved Approved Name Uta Thiel Kathrin Pauls Daniel Mercer Wim Broos Document BIM & Data Asset & Project Position manager Management Management CFPP Ressort Generation Generation Generation Generation Date 06.10.2014 24.11.2014 Signature Version: 1.0 External Page 2 von 22 GDF SUEZ Energie Deutschland AG Policy Delivery of Technical Record Table of contents 0 Introduction ................................................................................................................. 10 Expanded scope! ..................................................................................................................... 10 1 Framework conditions ................................................................................................... 10 1.1 Legal framework ........................................................................................................... 10 2 Technical provisions ...................................................................................................... 10 2.1 Document identifiers ....................................................................................................
    [Show full text]
  • Change and Exchange Electronic Document Management in Building Design
    Kurt Löwnertz Change and Exchange Electronic document management in building design Licentiate thesis Construction Management and Economics Royal Institute of Technology Stockholm, Sweden 1998 1 2 ABSTRACT Producing documents using computer supported methods has become common practice in the construction industry, but the management of documents is still to a large degree done with manual methods. Some pioneering users in design, construction and facility management respectively have applied electronic document management (EDM) within their organisations or for projects. How- ever, the introduction has hitherto been noticeably slow. This thesis discusses the benefits of the new document management techniques to the construction and facility management process, with focus on building de- sign, as well as the obstacles when implementing these techniques. The con- struction sector process has some particular properties, differing from other in- dustry sectors, in that a project organisation is formed anew for each project and involves a number of specialists with varying requirements for their company- internal production and management of documents. The main themes for EDM in building design are therefore how to manage the change of information and the exchange or sharing of information between the different organisations. The thesis contains a state-of-the-art description of document management in building design, including reviews of commercial applications, standards and current best practice. Basic techniques on a scale from file-hierarchy-based to product-model-based systems are classified and analysed from a building design perspective. Five cases of document management in practice have been studied. The compa- nies studied are active within different design disciplines and have chosen to in- troduce and use EDM in different ways, with respect to technology as well as the information content that is managed.
    [Show full text]
  • ISO 128-1:2003 Technical Drawings—General Principles of Presentation—Part 1
    ISO 128-1:2003 Technical drawings—General principles of presentation—Part 1: Introduction and index • ISO 128-20:1996 Technical drawings—General principles of presentation—Part 20: Basic conventions for lines • ISO 128-21:1997 Technical drawings—General principles of presentation—Part 21: Preparation of lines by CAD systems • ISO 128-22:1999 Technical drawings—General principles of presentation—Part 22: Basic conventions and applications for leader lines and reference lines • ISO 128-23:1999 Technical drawings—General principles of presentation—Part 23: Lines on construction drawings • ISO 128-24:2014 Technical drawings—General principles of presentation—Part 24: Lines on mechanical engineering drawings • ISO 128-30:2001 Technical drawings—General principles of presentation—Part 30: Basic conventions for views • ISO 128-34:2001 Technical drawings—General principles of presentation—Part 34: Views on mechanical engineering drawings • ISO 128-40:2001 Technical drawings—General principles of presentation—Part 40: Basic conventions for cuts and sections • ISO 128-44:2001 Technical drawings—General principles of presentation—Part 44: Sections on mechanical engineering drawings • ISO 128-50:2001 Technical drawings—General principles of presentation—Part 50: Basic conventions for representing areas on cuts and sections ISO 129 Technical drawings—Indication of dimensions and tolerances ISO 216 paper sizes, e.g. the A4 paper size ISO 406:1987 Technical drawings—Tolerancing of linear and angular dimensions ISO 1660:1987 Technical drawings—Dimensioning
    [Show full text]
  • Nationell Standardiseringsstrategi Period 2021 2023
    Rapport S-2019-04 – Strategi Standardiseringsstrategi, period 2021–2023 FÖR DIGITAL SAMHÄLLSBYGGNADSINFORMATION Standardiseringsstrategi, period 2021–2023 Framtagen inom projektet Nationell Standardiseringsstrategi för digital samhällsbyggnadsinformation Pontus Bengtson, Autodesk Lars Harrie, Lunds universitet Cristina Lázaro Morales, Plan B Henrik Linderoth, Tekniska högskolan Jönköping Anna Neidenström, Trafikverket Håkan Norberg, Plan B STANDARDISERINGSSTRATEGI, PERIOD 2021–2023 Förord Smart Built Environment är ett strategiskt innovationsprogram för hur samhälls- byggnadssektorn kan bidra till Sveriges resa mot att bli ett globalt föregångsland som realiserar de nya möjligheter som digitaliseringen för med sig. Smart Built Environment är ett av 17 strategiska innovationsprogram som har fått stöd inom ramen för Strategiska innovationsområden, en gemensam satsning mellan Vinnova, Energimyndigheten och Formas. Syftet med satsningen är att skapa förutsättningar för Sveriges internationella konkurrenskraft och bidra till hållbara lösningar på globala samhällsutmaningar. Samhällsbyggnadssektorn är Sveriges enskilt största sektor som påverkar hela vår be- byggda miljö, men den är fragmenterad med många aktörer och processer. Att förändra samhällsbyggandet med digitaliseringen som drivkraft kräver därför samverkan mellan många olika aktörer. Smart Built Environment tar ett samlat grepp över de möjligheter som digitaliseringen innebär och blir en katalysator för spridningen av nya möjligheter och affärsmodeller. Programmets mål är att till
    [Show full text]