Setembro 2012
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
Volumen 01 Anejos
>Volumen 01 Anejos 2 VOLUMEN ANEJOS 01 anejo 01. Estado del Arte. Este anejo recoge información complementaria a los temas principales presentados en la tesis. Se profundiza en la definición del concepto del paisaje y de los estudios cienciométricos. Se realiza un profundo análisis de la legislación existente en materia de paisaje en todo el mundo. Además, se muestra la situación de la educación del paisaje en España. Y por último, se presenta el Proyecto OASIS, escenario del caso práctico de la tesis. anejo 02. Fuentes utilizadas en el proceso de normalización. Se muestra el listado de normas encontradas en el proceso de búsqueda de normativa existente en materia de paisaje. anejo 03. Desarrollo de los documentos normativos. Se muestra el proceso seguido para la realización de una propuesta de documento normativo para cada uno de los temas detectados como principales vacíos en materia de paisaje. anejo 04. Propuesta de Cruz Calleja como norma de terminología al GT13 paisaje CTN157 proyectos de AENOR. Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje. anejo 05. Propuesta de Cruz Calleja como norma de Estudios de Impacto e Integración Paísajística al GT13 paisaje CTN157 proyectos de AENOR. Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje. anejo 06. Propuesta de Cruz Calleja como norma de la profesión de arquitecto paisajista al GT13 paisaje CTN157 proyectos de AENOR.Se recogen los p Se muestra el documento que será propuesto como norma en la próxima reunión del grupo de AENOR para paisaje. -
Date: 14 December 2012 Origin: European DPC: 12 / 30257558 DC
Draft for Public Comment Form 36 DPC: 12 / 30257558 DC BSI Group Headquarters Date: 14 December 2012 389 Chiswick High Road London W4 4AL Origin: European Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 www.bsigroup.com Latest date for receipt of comments: 31 March 2013 Project No. 2011/03420 Responsible committee: TDW/4 Technical Product Realization Interested committees: TDW/4/10 Title: Draft BS ISO 10628-1 Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams Please notify the secretary if you are aware of any keywords that might assist in classifying or identifying the standard or if the content of this standard i) has any issues related to 3rd party IPR, patent or copyright ii) affects other national standard(s) iii) requires additional national guidance or information WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 31 March 2013 This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on the submission of comments. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for circulation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Shop http://shop.bsigroup.com or from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email [email protected]. -
Design, Development and Introduction of Smart P&I Diagrams for Wärtsilä
Design, Development and Introduction of Smart P&I Diagrams for Wärtsilä 31 Engine Robin Linman Bachelor´s thesis Degree Programme in Mechanical and Production Engineering Vaasa 2019 BACHELOR’S THESIS Author: Robin Linman Degree Programme: Mechanical and Production Engineering, Vaasa Specialization: Mechanical Engineering Supervisor(s): Franco Cavressi (Wärtsilä) and Kenneth Ehrström (Novia) Title: Design, Development and Introduction of Smart P&I-Diagrams for Wärtsilä 31 Engine _________________________________________________________________________ Date April 1, 2019 Number of pages 43 Appendices 7 _________________________________________________________________________ Abstract This thesis has been made for Design team W31 which is a part of Wärtsilä Finland. Design team W31 is primarily working with creating new designs and updating drawings and instructional documents for the Wärtsilä 31 engine. The purpose of this thesis was to create a template in Microsoft Visio that will make it easy for engineers to create Piping and instrumentation diagrams. Microsoft Visio is a drawing program for creating different types of diagrams. A template is a document that works as a foundation for a new drawing and can contain special features and a predefined layout. A Piping and Instrumentation diagram is a detailed flow diagram that describes how piping, equipment and instrumentation are placed and work together in a process. The result of this thesis is a customized template in Microsoft Visio. The template was tested and implemented by drawing -
Change and Exchange Electronic Document Management in Building Design
Kurt Löwnertz Change and Exchange Electronic document management in building design Licentiate thesis Construction Management and Economics Royal Institute of Technology Stockholm, Sweden 1998 Construction Informatics Digital Library http://itc.scix.net/ paper fea8.content.05940 1 2 ABSTRACT Producing documents using computer supported methods has become common practice in the construction industry, but the management of documents is still to a large degree done with manual methods. Some pioneering users in design, construction and facility management respectively have applied electronic document management (EDM) within their organisations or for projects. How- ever, the introduction has hitherto been noticeably slow. This thesis discusses the benefits of the new document management techniques to the construction and facility management process, with focus on building de- sign, as well as the obstacles when implementing these techniques. The con- struction sector process has some particular properties, differing from other in- dustry sectors, in that a project organisation is formed anew for each project and involves a number of specialists with varying requirements for their company- internal production and management of documents. The main themes for EDM in building design are therefore how to manage the change of information and the exchange or sharing of information between the different organisations. The thesis contains a state-of-the-art description of document management in building design, including reviews of commercial applications, standards and current best practice. Basic techniques on a scale from file-hierarchy-based to product-model-based systems are classified and analysed from a building design perspective. Five cases of document management in practice have been studied. -
WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018)
WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018) Technical Committee No. 1 “Quality assurance and social responsibility”, 11 standards No. Standard number English title 1. EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) 2. CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities 3. EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) 4. CWA 17145-2:2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework 5. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee 6. EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) 7. EN ISO 41001:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) 8. IWA 18:2016 Framework for integrated community-based life-long health and care services in aged societies 9. IWA 16:2015 International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport 10. ISO/IEC Guide 17:2016 ISO/IEC Guide 17:2016Guide for writing standards taking into account the needs of micro, small and medium-sized enterprises 11. ISO 37500:2014 Guidance on outsourcing Technical Committee No. 3 “Electrical and electronical materials”, 59 standards No. Standard number English title 1. EN 50288-12-1:2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - 1 Horizontal and building backbone cables 2. -
Plan Nacional De Normalización 2016/2017
ACTUALIZADO 07/07/2017 PERIODO 2017 PÁGINA 1 DE 46FFFFFFFFFF PLAN NACIONAL DE NORMALIZACIÓN 2016/2017 Sistema de códigos de las etapas: 00) Etapa preliminar 10) Etapa de propuesta Código: R02-PGDN-01 20) Etapa de preparación Versión: 02 30) Etapa de comité Dirección: Ciudad Científica de la Universidad de Costa Rica. 40) Etapa de encuesta o consulta pública www.inteco.org 50) Etapa de aprobación (50.1 con observaciones, 50.2 voto OE, 50.3 voto CNN) 60) Etapa de publicación 90) Etapa de revisión o actualización 95) Etapa de retiro o anulación FECHA INICIO DE LA FECHA PREVISTA DE PERIODO OE CÓDIGO INTE NUEVO CÓDIGO PROYECTO DE NORMA ICS ANTECEDENTES ETAPA FECHA FINAL CP ETAPA PUBLICACIÓN FAST TRACK Normalización y actividades conexas- Vocabulario general 2016 FT GUÍA INTE/ISO/IEC 2:2016 GUÍA INTE/ISO/IEC 2:2016 01.120; 01.040.01 ISO/IEC Guide 2:2004 60 19/12/2016 13/12/2016 2016-12 (ISO/IEC Guide 2:2004, IDT). Adopción regional o nacional de normas internacionales y otras publicaciones internacionales- parte 2: adopción de 2016 FT GUÍA INTE/ISO/IEC 21-2: 2016 GUÍA INTE/ISO/IEC 21-2: 2016 1120 Guía ISO/IEC 21-2:2005 60 19/12/2016 13/12/2016 2016-12 publicaciones internacionales distintas a las normas internacionales Elementos de datos y formatos de intercambio. Intercambio 2017 FT APN INTE/ISO 3166-1:2017 APN INTE/ISO 3166-1:2017 01.140.30 20 2017-03-20 de información. Representación de la fecha y de la hora. ISO 3166-1:2013 Códigos para la representación de los nombres de los países 2017 FT APN INTE/ISO 8601:2017 APN INTE/ISO 8601:2017 01.140.30 ISO 8601:2004 20 2017-03-20 y sus subdivisiónes. -
HZN Oglasnik Za Normativne Dokumente 5
Hrvatski zavod za norme Oglasnik za normativne dokumente 5/2014 listopad, 2014. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 2 Rezultati međunarodne i europske 1.1 Hrvatske norme ............................................................ A3 normizacije razvrstani po predmetnom 1.2 Nacrti hrvatskih norma ............................................... A42 ustroju .................................................A83 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ... A42 3 Popis radnih dokumenata Codex 1.4 Povučene hrvatske norme.......................................... A66 Alimentariusa 1.5 Povučeni nacrti hrvatskih norma ....................................... 4 Obavijesti HZN-a 1.6 Ispravci hrvatskih norma .............................................A79 4.1 Cjenik hrvatskih norma 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku........................................................A82 1.8 Drugi normativni dokumenti 1.9 Opća izdanja HZN-a 1.10 Prijevodi hrvatskih normativnih dokumenata ...............A83 A2 HZN - Oglasnik za normativne dokumente 5/2014 • Rezultati hrvatske normizacije Rezultati hrvatske normizacije HZN/TO 21, Protupožarna i vatrogasna oprema HRN EN 694:2014 en pr 1.1 Hrvatske norme Vatrogasne cijevi – Polukrute cijevi za stabilne Temeljem Zakona o normizaciji (Narodne novine 80/2013) sustave (EN 694:2014) hrvatske norme priprema, izdaje i objavljuje Hrvatski zavod za Fire-fighting hoses – Semi-rigid hoses for fixed norme, na prijedlog tehničkih odbora. -
English Version of These Regulations Is Available in the Following Website
ToolboxMarch 2019 A Practitioner's Handbook For Eco-Industrial Parks Implementing the International EIP Framework Toolbox A Practitioner’s Handbook For Eco-Industrial Parks: Toolbox ©2019 The World Bank Group 1818 H Street NW Washington, DC 20433 Telephone: 202-473-1000 Internet: www.worldbank.org All rights reserved. This volume is a product of the staff of the World Bank Group. The World Bank Group refers to the member institutions of the World Bank Group: The World Bank (International Bank for Reconstruction and Development); International Finance Corporation (IFC – the largest global development institution focused on the private sector in emerging markets); and Multilateral Investment Guarantee Agency (MIGA), which are separate and distinct legal entities each organized under its respective Articles of Agreement. We encourage use for educational and non-commercial purposes. The findings, interpretations, and conclusions expressed in this volume do not necessarily reflect the views of the Directors or Executive Directors of the respective institutions of the World Bank Group or the governments they represent. The World Bank Group does not guarantee the accuracy of the data included in this work. Rights and Permissions The material in this publication is copyrighted. Copying and/or transmitting portions or all of this work without permission may be a violation of applicable law. The World Bank Group encourages dissemination of its work and will normally grant permission to reproduce portions of the work promptly. For permission to photocopy or reprint any part of this work, please send a request with complete information to the Copyright Clearance Center Inc., 222 Rosewood Drive, Danvers, MA 01923, USA; telephone: 978-750- 8400; fax: 978-750-4470; Internet: www.copyright.com. -
Isoupdate May 2019
ISO Update Supplement to ISOfocus May 2019 International Standards in process ISO/CD Agricultural machinery and tractors — Re- 22172-2 pair and maintenance information — Part 2: An International Standard is the result of an agreement between Diagnostics the member bodies of ISO. A first important step towards an Interna- ISO/CD 23130 Milking and cooling machine installa- tional Standard takes the form of a committee draft (CD) - this is cir- tions — Monitoring device for cooling tanks culated for study within an ISO technical committee. When consensus — Requirements has been reached within the technical committee, the document is ISO/CD 11839 Machinery for forestry — Glazing and panel sent to the Central Secretariat for processing as a draft International materials used in operator enclosures for Standard (DIS). The DIS requires approval by at least 75 % of the protection against thrown sawteeth — Test member bodies casting a vote. A confirmation vote is subsequently method and performance criteria carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD Agricultural and forestry machinery — Safety 11806-1 requirements and testing for portable, hand- held, powered brush-cutters and grass-trim- mers — Part 1: Machines fitted with an integral combustion engine ISO/CD Agricultural and forestry machinery — Safety 11806-2 requirements and testing for portable, hand- held, powered brush-cutters and grass- trimmers — Part 2: Machines for use with CD registered back-pack power unit TC 31 Tyres, rims and valves ISO/CD 3739-1 Industrial tyres and rims — Part 1: Pneumatic Period from 01 April to 30 April 2019 tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and These documents are currently under consideration in the technical marking committee. -
New 3D Parameters and Filtration Techniques for Surface Metrology, François Blateyron, Quality Magazine White Paper
New 3D Parameters and Filtration Techniques for Surface Metrology François Blateyron, Director of R&D, Digital Surf, France For a long time surface metrology has been based upon contact measurement using 2D profilometers. Over the past twenty years the appearance of 3D profilometers and non-contact gauges has created a need for the standardization and formalization of the analysis of 3D surface texture. This paper presents the current status of the standardization process and includes a short description of the tools and parameters that will become available to users when work on the definition of the new standards, which is being carried out by working groups WG15 and WG16 of ISO technical committee TC213, has been completed. 1. Introduction meeting, and officially transferred to the TC213, in order to Since the first roughness meters appeared at the beginning start the standardization process. of the 1930s, the measurement of surface texture has always been based on 2D profilometry and contact gauges. 3. Towards a complete rework of all We had to wait until the beginning of the 1980s to see the surface texture standards appearance of instruments for measuring 3D surfaces, such In June 2002, the TC213 voted the creation of a new as white light interferometers and 3D profilometers working group [N499] and assigned it the task of [WHI94]. The first tools for analysing measurements developing future international standards for 3D surface generated by these instruments were developed by each texture. This group met for the first time in January 2003, in manufacturer, often extrapolating from existing tools for Cancun. -
Blank IEC Form
3(Seattle/Secretary)4 For IEC use only ® 2010-10-03 INTERNATIONAL ELECTROTECHNICAL COMMISSION TECHNICAL COMMITTEE 3: INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS Maintenance Team 21: MAINTENANCE OF IEC 62079 Report on IEC TC 3 MT 21 Activities 1 Organization Convenors: Mrs Gabriela Fleischer (DE) Mr Naoki Tokuda (JP) Members: Mr Sumio Araki (JP) Mr Thomas Borglin (SE) Mr Kai Bohn (DE) Mr Michael Fritz (DE) Mr Gordon Hayward (GB) Mr Hiroaki Ikeda (JP) Ms Junko KANAMARU (JP) Mr John Perry (GB) Mr Sven Radhe (ISO) Mr Arto Sirviö (FI) Mr Karl-Anker Thorn (DK) Mr Sven Ingolf Garnæs Ring (DK) Mr Roland Schmeling (DE) 2 Status of IEC 82079. The 2nd CD of IEC 82079 was circulated with closing 2010-03-05. The circulation resulted in a big number of comments which required essential changes of the draft. TC 3 Chairman and Secretary decided that a third draft should be circulated. The 3rd CD was circulated with closing date 2010-08-13. Also this circulation resulted in a big number of comments (for one thing because comments from ISO TC 10 on 2nd CD by mistake was not reported to the 2nd CD but to the 3rd). A preliminary compilation of comments was circulated 2010-09-17. MT 21 considered all comments in a meeting in September and prepared a draft intended to be circulated as CDV. The final compilation of comments has been completed but could not be circulated before the TC 3 plenary meeting in Seattle. The draft CC also including the draft CDV is attached to this report. -
Roughness Control and Surface Texturing in Lubrication 8H35 9H15 Keynote Speaker D
1 Web site www.metprops2019.org #Met&PropsLYON 2 Local Organising Committee CHAIR: Prof. Hassan Zahouani (University of Lyon, France - Halmstad University, Sweden) Prof. Cyril-Pailler Mattéi (University of Lyon, France) Prof. Haris procopiou (Université Paris I, Panthéon-Sorbonne, France) Prof Philippe Kapsa (CNRS, France) Dr. Roberto Vargiolu (Univesity of Lyon, France) Dr. Coralie Thieulin (University of Lyon, France) International Program Committee Prof. Liam Blunt (University of Huddersfield, UK) Prof. Christopher Brown (WPI Worcester Polytech Institute, USA) Prof. Thomas Kaiser (University of Hamburg, Germany) Prof. Mohamed El Mansori (Ecole Nationale Supérieure d'Arts et Métiers (ENSAM), France) Prof. Richard Leach (University of Nottingham, UK) Prof. Bengt-Göran, BG, Rosén (Halmstad University, Sweden) Dr. Ellen Schulz-Kornas, (Max Planck Weizmann Center for Integrative Archaeology and Anthropology, Germany) Prof. Tom R Thomas (Halmstad University, Sweden) Prof. Michael Wieczorowski (University of Poznan, Poland) Prof. Hassan Zahouani (University of Lyon - ENISE - Ecole Centrale de Lyon, France) International Scientific Committee A. Archenti, Royal Institute of Technology, Sweden K. Adachi, Tohoku University, Japan F. Blateyron, Digital Surf, France L. Blunt, University of Huddersfield, UK D. Butler, Nanyang Tech. Uni. NTU, Singapore C. Boulocher , Veagro-sup , France C. Brown, Worcester Polytechic Institute, USA M. El-Mansori, Ecole Nationale Superieure d'Arts et Metiers , France C. Evans, University of North Carolina - Charlotte, USA C. Giusca, National Physical Laboratory, UK S. Gröger, Chemnitz University of Technology, Germany W. Hongjun, Beijing Information Science & Technology University, China T. Kaiser University of Hamburg, Germany M. Kalin, University of Lubljana, Slovenia P. Kapsa, CNRS, France P. Krajnik, Chalmers University of Technology, Sweden R.