DOCSLIB.ORG

Standards Publications

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Standards Publications IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. 178:1973 Date published 28 SEPTEMBER 2005 Extruded Rigid PVC Corrugated Sheeting 2. I.S. EN 60835-1-2:1993 Date published 1 JUNE 2005 Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -- Section 2: Basic characteristics (IEC 60835-1-2:1992 (EQV)) 3. I.S. EN 160000:1993/A1:1996 Date published 1 JUNE 2005 Generic Specification: Modular electronic units 4. I.S. EN 61595-1:1999 Date published 1 JUNE 2005 Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use -- Part 1: Format A (IEC 61595-1:1997 (EQV)) 5. I.S. EN 1990:2002+NA:2010 Date published 24 MARCH 2005 Eurocode - Basis of structural design (including Irish National Annex) 6. I.S. EN ISO 14122-4:2004 Date published 23 FEBRUARY 2005 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) 7. I.S. EN 13877-1:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 1: Materials 8. I.S. EN 13877-2:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 2: Functional requirements for concrete pavements 9. I.S. EN 12843:2004 Date published 4 MARCH 2005 Precast concrete products - Masts and poles 10. I.S. EN 13225:2005 Date published 4 MARCH 2005 Precast concrete products - Linear structural elements 11. I.S. EN 13693:2004 Date published 4 MARCH 2005 Precast concrete products - Special roof elements 12. I.S. CEN TR 14862:2005 Date published 4 MARCH 2005 Precast concrete products - Full-scale testing requirements in standards on precast concrete products 13. I.S. EN ISO 17249:2004 Date published 23 SEPTEMBER 2005 Safety footwear with resistance to chain saw cutting - (ISO 17249:2004) Date: 18/07/2018 Page 1 14. I.S. EN ISO 1968:2004 Date published 15 JULY 2005 Fibre ropes and cordage - Vocabulary (ISO 1968:2004) 15. I.S. EN 60332-1-1:2004 Date published 10 JANUARY 2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus (IEC 60332-1 -1:2004 (EQV)) 16. I.S. EN 60332-1-2:2004 Date published 10 JANUARY 2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre- mixed flame (IEC 60332-1-2:2004 (EQV)) 17. I.S. EN 60332-1-3:2004 Date published 10 JANUARY 2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles (IEC 60332-1-3:2004 (EQV)) 18. I.S. EN 60332-2-1:2004 Date published 10 JANUARY 2005 Tests on electric and optical fibre cables under fire conditions -- Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus (IEC 60332-2-1:2004 (EQV)) 19. I.S. EN 60332-2-2:2004 Date published 10 JANUARY 2005 Tests on electric and optical fibre cables under fire conditions -- Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame (IEC 60332-2-2:2004 (EQV)) 20. I.S. EN 61857-21:2004 Date published 10 JANUARY 2005 Electrical insulation systems - Procedures for thermal evaluation -- Part 21: Specific requirements for general-purpose models - Wire-wound applications (IEC 61857 -21:2004 (EQV)) 21. I.S. EN 62282-2:2004 Date published 10 JANUARY 2005 Fuel cell technologies -- Part 2: Fuel cell modules (IEC 62282-2:2004 (EQV)) 22. I.S. EN 50317:2002/A1:2004 Date published 10 JANUARY 2005 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line 23. I.S. EN 60846:2004 Date published 10 JANUARY 2005 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation (IEC 60846:2002 (MOD)) 24. I.S. EN 61472:2004 Date published 10 JANUARY 2005 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation (IEC 61472:2004 (EQV)) Date: 18/07/2018 Page 2 25. I.S. EN 61005:2004 Date published 10 JANUARY 2005 Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters (IEC 61005:2003 (MOD)) 26. I.S. EN 50134-5:2004 Date published 10 JANUARY 2005 Alarm systems - Social alarm systems -- Part 5: Interconnections and communications 27. I.S. EN 61108-4:2004 Date published 10 JANUARY 2005 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results (IEC 61108-4:2004 (EQV)) 28. I.S. EN 62150-2:2004 Date published 10 JANUARY 2005 Fibre optic active components and devices - Test and measurement procedures -- Part 2: ATM-PON transceivers (IEC 62150-2:2004 (EQV)) 29. I.S. EN 62252:2004 Date published 10 JANUARY 2005 Maritime navigation and radiocommunication equipment and systems - Radar for craft not in compliance with IMO SOLAS Chapter V - Performance requirements, methods of test and required test results (IEC 62252:2004 (EQV)) 30. I.S. EN 60384-14-2:2004 Date published 10 JANUARY 2005 Fixed capacitors for use in electronic equipment -- Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only (IEC 60384-14-2:2004 (EQV)) 31. I.S. EN 60384-14-3:2004 Date published 10 JANUARY 2005 Fixed capacitors for use in electronic equipment -- Part 14-3: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ (IEC 60384-14-3:2004 (EQV)) 32. I.S. EN ISO 13626:2004 Date published 12 JANUARY 2005 Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003) 33. I.S. EN 14870-1:2004 Date published 12 JANUARY 2005 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified) 34. I.S. EN ISO 10426-3:2004 Date published 12 JANUARY 2005 Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2003) 35. I.S. EN ISO 10427-3:2004 Date published 12 JANUARY 2005 Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment (ISO 10427-3:2003) Date: 18/07/2018 Page 3 36. I.S. EN 13986:2004 Date published 12 JANUARY 2005 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking 37. I.S. CEN TR 14748:2004 Date published 12 JANUARY 2005 Non-destructive testing - Methodology for qualification of nondestructive tests 38. I.S. EN 13852-2:2004 Date published 12 JANUARY 2005 Cranes - Offshore cranes - Part 2: Floating cranes 39. I.S. EN 13141-5:2004 Date published 12 JANUARY 2005 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices 40. I.S. EN 930:1997/A1:2004 Date published 12 JANUARY 2005 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements 41. I.S. EN 931:1997/A1:2004 Date published 12 JANUARY 2005 Footwear manufacturing machines - Lasting machines - Safety requirements 42. I.S. EN 12653:1999/A1:2004 Date published 12 JANUARY 2005 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements 43. I.S. EN 13422:2004 Date published 12 JANUARY 2005 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders 44. I.S. EN ISO 17294-2:2004 Date published 12 JANUARY 2005 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements (ISO 17294-2:2003) 45. I.S. EN 14579:2004 Date published 12 JANUARY 2005 Natural stone test methods - Determination of sound speed propagation 46. I.S. EN 14157:2004 Date published 12 JANUARY 2005 Natural stones - Determination of abrasion resistance 47. I.S. EN 12057:2004 Date published 12 JANUARY 2005 Natural stone products - Modular tiles - Requirements 48. I.S. EN 12058:2004 Date published 12 JANUARY 2005 Natural stone products - Slabs for floors and stairs - Requirements 49. I.S. EN 13707:2004 Date published 12 JANUARY 2005 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics Date: 18/07/2018 Page 4 50. I.S. EN 12674-3:2004 Date published 12 JANUARY 2005 Roll containers - Part 3: Test methods 51. I.S. EN 1915-3:2004 Date published 12 JANUARY 2005 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction 52. I.S. EN 14129:2004 Date published 12 JANUARY 2005 Pressure relief valves for LPG tanks 53. I.S. EN 13938-1:2004 Date published 12 JANUARY 2005 Explosives for civil uses - Propellants and rocket propellants - Part 1: Requirements 54. I.S. EN 13938-2:2004 Date published 12 JANUARY 2005 Explosives for civil uses - Propellants and rocket propellants - Part 2: Determination of resistance to electrostatic energy 55.
Load more

Recommended publications
  • Proceedings 2005
    LAC2005 Proceedings 3rd International Linux Audio Conference April 21 – 24, 2005 ZKM | Zentrum fur¨ Kunst und Medientechnologie Karlsruhe, Germany Published by ZKM | Zentrum fur¨ Kunst und Medientechnologie Karlsruhe, Germany April, 2005 All copyright remains with the authors www.zkm.de/lac/2005 Content Preface ............................................ ............................5 Staff ............................................... ............................6 Thursday, April 21, 2005 – Lecture Hall 11:45 AM Peter Brinkmann MidiKinesis – MIDI controllers for (almost) any purpose . ....................9 01:30 PM Victor Lazzarini Extensions to the Csound Language: from User-Defined to Plugin Opcodes and Beyond ............................. .....................13 02:15 PM Albert Gr¨af Q: A Functional Programming Language for Multimedia Applications .........21 03:00 PM St´ephane Letz, Dominique Fober and Yann Orlarey jackdmp: Jack server for multi-processor machines . ......................29 03:45 PM John ffitch On The Design of Csound5 ............................... .....................37 04:30 PM Pau Arum´ıand Xavier Amatriain CLAM, an Object Oriented Framework for Audio and Music . .............43 Friday, April 22, 2005 – Lecture Hall 11:00 AM Ivica Ico Bukvic “Made in Linux” – The Next Step .......................... ..................51 11:45 AM Christoph Eckert Linux Audio Usability Issues .......................... ........................57 01:30 PM Marije Baalman Updates of the WONDER software interface for using Wave Field Synthesis . 69 02:15 PM Georg B¨onn Development of a Composer’s Sketchbook ................. ....................73 Saturday, April 23, 2005 – Lecture Hall 11:00 AM J¨urgen Reuter SoundPaint – Painting Music ........................... ......................79 11:45 AM Michael Sch¨uepp, Rene Widtmann, Rolf “Day” Koch and Klaus Buchheim System design for audio record and playback with a computer using FireWire . 87 01:30 PM John ffitch and Tom Natt Recording all Output from a Student Radio Station .
    [Show full text]
  • Master's Degree Thesis Report Implementation of IEC 61499
    Master’s Degree Thesis Report Karthik Gopinath Sharma [email protected] September 19, 2019 Implementation of IEC 61499 Applications for Centralized Power System Protection Platform SUPERVISORS Prof. Oriol Gomis Bellmunt(UPC) Tin Rabuzin (KTH) Escola Tecnica` Superior d’Enginyeria Industrial de Barcelona 1 Page No. 1 Acknowledgements To InnoEnergy Master’s School for giving me two years of free and superior edu- cation in the field of Smart Grids and Renewable Energy I could ever ask for. To UPC, Barcelona and KTH, Stockholm two of the finest universities along with the best professors and friends enabling me to enjoy the journey throughout my double master’s degree. To my supervisors, Oriol Gomis Bellmunt and Tin Rabuzin, for allowing me to pursue this project as part of my master thesis and being there with me throughout the dura- tion of the Master Thesis guiding me with their knowledge and experience. To Alois Zoitl, for taking his precious time out in helping me to understand a criti- cal issue during the project. To my family, for being my support always. Page No. 2 Abstract With the onset of distributed energy resources in the electricity generation, the sce- narios for protection and automation are becoming challenging. Even with guidelines like IEC61850 which focuses on digital substations there is a big issue in terms of inte- grating systems from different vendors. On the other hand IEC 61499 is moving ahead with enabling distributed automation and control in Industrial environment. This report aims to answer if it is possible to design an IED based on IEC61850 us- ing IEC61499.
    [Show full text]
  • System Manual Pdm360smart Monitor CR1070 CR1071 Codesys® V2.3 Target V05 English
    System Manual PDM360smart monitor CR1070 CR1071 CoDeSys® V2.3 Target V05 English 7390674_01_UK 2012-05-16 2012-05-16 7390674_01_UK ifm System Manual ecomatmobile PDM360smart (CR1070, CR1071) Target V05 2012-05-16 Contents Contents 1 About this manual 7 1.1 What do the symbols and formats mean? ......................................................................7 1.2 How is this manual structured?.......................................................................................8 2 Safety instructions 9 2.1 Important!........................................................................................................................9 2.2 What previous knowledge is required?.........................................................................10 3 System description 11 3.1 Information concerning the device................................................................................11 3.2 Information concerning the software.............................................................................11 3.3 PLC configuration .........................................................................................................12 4 Configurations 13 4.1 Set device parameters (setup)......................................................................................13 4.1.1 Start set-up ..............................................................................................................14 4.1.2 Show the current device settings.............................................................................15 4.1.3 Change
    [Show full text]
  • Iot LSP Standard Framework Concepts 2015
    AIOTI ALLIANCE FOR INTERNET OF THINGS INNOVATION IoT LSP Standard Framework Concepts Release 2.0 AIOTI WG03 – loT Standardisation 2015 AIOTI ALLIANCE FOR INTERNET OF THINGS INNOVATION Executive Summary This deliverable introduces IoT Standards Developing Organisation (SDO), Alliance and Open Source Software (OSS) landscapes to be used as input for the recommendations for Large Scale Pilots (LSPs) standard framework and gap analysis. The LSPs can play an important role in investigating and solving specific challenges for the IoT industry and promoting innovation that is related to specific activities such as 1) the applied standards framework, 2) deployments, 3) technological and business model validation and 4) acceptability. The main objective of this deliverable is to briefly present the global dynamics and landscapes of IoT SDO, Alliance and OSS initiatives, which can be used: 1) to leverage on existing IoT standardization, industry promotion and implementation of standards and protocols, 2) as input for LSP standards framework and gap analysis and 3) to provide a guideline for the proponents of future project proposals associated with future IoT related calls financed by the EC on the positioning of these initiatives within these landscapes. AIOTI – Restricted 2 AIOTI ALLIANCE FOR INTERNET OF THINGS INNOVATION Table of Contents 1. GOAL AND MOTIVATION............................................................................................................................. 4 2. IOT SDO AND ALLIANCE INITIATIVES LANDSCAPE..........................................................................
    [Show full text]
  • Smart Reconfiguration of Distribution Grids Using Agent-Based Technology
    FACULDADE DE ENGENHARIA DA UNIVERSIDADE DO PORTO Smart Reconfiguration of Distribution Grids using Agent-based Technology Matheus Macedo Lopes Dissertation conducted under the Master’s in Electrical and Computers Engineering Program - Major Energy Supervisor: Prof. Vladimiro Miranda , Ph.D. Co-Supervisor: Prof. Diego Issicaba , Ph.D. July 28, 2016 © Matheus Macedo Lopes, 2016 Resumo As manobras de isolamento para reconfiguração em redes de distribuição de média tensão são tradicionalmente manuais ou dependem de decisões tomadas pelos operadores de rede. A abor- dagem proposta assume uma arquitetura onde os agentes interagem em um ambiente de rede de distribuição simulado a partir do estabelecimento de metas projetadas seguindo o paradigma de orientação mulit-agente. A aplicação é implementada de tal forma que agentes AgentSpeak in- teragem entre eles através de uma comunicação baseada em ato de fala/comunicação, bem como com um ambiente desenvolvido em linguagem JAVA. Neste contexto, esta tese propõe a modelagem e verificação de soluções baseadas em agentes para apoiar as operações de reconfiguração em redes de distribuição em nível de média tensão. A metodologia foi utilizada para apoiar as actividades dos operadores de redes de distribuição por meio de planos de restabelecimento de energia para ajudar em casos de falhas permanentes. As abordagens empregadas para arquitetura de agentes para a reconfiguração foram baseadas em modelo hierárquico e uma abordagem totalmente descentralizada. A capabilidade dos agentes foram desenvolvidas prevendo as possiveis aplicações do sistema de distribuição com foco em procedimentos de gestão des interrupções de service. As abordagens foram testadas em um ali- mentador teste trifásico do IEEE de 123 nós.
    [Show full text]
  • Response Time for IEC 61499 Over Ethernet
    Response Time for IEC 61499 over Ethernet Per Lindgren, Johan Eriksson, Marcus Lindner and Andreas Lindner David Pereira and Luís Miguel Pinho Luleå University of Technology CISTER / INESC TEC, ISEP Email:{per.lindgren, johan.eriksson, marcus.lindner, andreas.lindner}@ltu.se Email: {dmrpe, lmp}@isep.ipp.pt Abstract—The IEC 61499 standard provides means to specify general purpose usage. Our results are safe to the worst case, distributed control systems in terms of function blocks. The while further improvements can be obtained if the Maximum execution model is event driven (asynchronous), where triggering Transmission Unit (MTU) of general purpose (best effort events may be associated with data (and seen as a message). traffic) is controlled. In this paper we propose a low complexity implementation technique allowing to assess end-to-end response time of event We can conclude that the presented approach reduces chains spanning over a set of networked devices. In this paper we complexity of distribution (in comparison to the traditional develop a method to provide safe end-to-end response time taking SCADA approach), reduces device and network complexity both intra- and inter-device delivery delays into account. As a (does neither require complex time triggered architectures use case we study the implementation onto (single-core) ARM- like scan based PLCs, nor any dedicated network compo- cortex based devices communicating over a switched Ethernet network. For the analysis we define a generic switch model and nents/protocols), and is highly flexible (allowing network shar- an experimental setup allowing us to study the impact of network ing between real-time and best-effort devices).
    [Show full text]
  • Progress File (Standards Publications)
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 62129:2006 Date published 18 OCTOBER 2008 Calibration of optical spectrum analyzers (IEC 62129:2006 (EQV)) 2. I.S. EN 61076-2-101:2003/A1:2006 Date published 18 OCTOBER 2008 Connectors for electronic equipment -- Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw- locking for low voltage applications (IEC 61076-2-101:2003/A1:2006 (EQV)) 3. I.S. EN 60464-1:1999/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 1: Definitions and general requirements (IEC 60464-1:1998/A1:2006 (EQV)) 4. I.S. EN 60464-3-1:2001/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 1: Ambient curing finishing varnishes (IEC 60464-3-1:2001/A1:2006 (EQV)) 5. I.S. EN 62329-1:2006 Date published 18 OCTOBER 2008 Heat shrinkable moulded shapes -- Part 1: Definitions and general requirements (IEC 62329-1:2005 (EQV)) 6. I.S. EN 61755-1:2006 Date published 18 OCTOBER 2008 Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non- dispersion shifted fibres - General and guidance (IEC 61755-1:2005 (EQV)) 7. I.S. EN 60454-3-8:2006 Date published 18 OCTOBER 2008 Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3 -8:2006 (EQV)) 8.
    [Show full text]
  • Catalog of GA Control Systems
    GA automation technology product catalog Contact information GEBHARDT Automation GmbH Thüngenfeld 3 D- 58256 Ennepetal Germany Tel.: +49 2333 7908 - 0 available during working hours, Mo to Fr, from 800 to 1700 (5 pm) central european time (CET, GMT+1). FAX: +49 2333 7908 - 24 Web: www.gebhardt-automation.de Support [email protected] Information [email protected] Date: 10/2012 GA catalog_Rev 02.01_2012-10-09 en.doc page 2 of 40 Contents GA BlueLine Systems ............................................................................................................4 Redundancy, fault tolerance and voting...............................................................................................5 Machinery Monitoring Systems............................................................................................................6 Monitoring Capabilities.........................................................................................................................7 GA TMR/10-S.......................................................................................................................................8 GA TMR SMART-S ..............................................................................................................................9 GA DUPLEX/7-S ................................................................................................................................10 GA DUPLEX SMART-S .....................................................................................................................11
    [Show full text]
  • SAFE TORQUE OFF a Guide to the Application of the Control Techniques Safe Torque Off Safety Function and Its Compliance with IEC 61800-5-2 SAFE TORQUE OFF
    SAFE TORQUE OFF A guide to the application of the Control Techniques Safe Torque Off safety function and its compliance with IEC 61800-5-2 SAFE TORQUE OFF 1. Purpose of this guide This application guide gives general explanations, advice and guidance for the use of the Safe Torque Off (STO) feature which is provided in many of Control Techniques’ variable speed drive products. It supplements the specific product information given in the product Technical Guides. In the event of any discrepancy the product Technical Guide takes precedence. Most of the information is general in nature and applies to all models. Some model- specific information is given in Annex 1. Important warnings The design of safety-related systems requires specialist knowledge. To ensure that a complete control system is safe it is necessary for the whole system to be designed according to recognised safety principles. The use of individual sub-systems such as drives with Safe Torque Off functions, which are intended for safety- related applications, does not in itself ensure that the complete system is safe. The information given in this publication gives guidance on the application of Control Techniques Safe Torque Off, and also some general background material on the design of safety-related systems for machinery control. This publication is not intended to form a complete guide to the subject. Some more detailed references are given at the end of the guide. The information provided is believed to be correct and to reflect accepted practice at the time of writing. It is the responsibility of the designer of the end product or application to ensure that it is safe and in compliance with the relevant regulations.
    [Show full text]
  • Seznam Norem
    Veškeré normy a tištěnou verzi tohoto seznamu můžete objednat u firmy Ing. Jiří Hrazdil - Technické normy, Vranovská 20, 614 00 Brno, IČO 15197913, DIČ CZ5911030158 tel. 736 168 972, e-mail [email protected], internetová prodejna norem https://shop.normy.biz/ 36 ELEKTROTECHNIKA Sdružené osvětlení ČSN 36 0050-2 Vydána: 2015-01 (36 0050), kat. č. 95338 3600 Osvětlování, všeobecně Cena: 222 Kč Osvětlení podzemí dolů - Světelnětechnické Změny: Z1 8.19t základy navrhování - Část 2: Poruby s ČSN EN 61375-2-5 ČSN EN 60630 hydraulicky ovládanými mechanizovanými (36 0000), kat. č. 97728 výztužemi převzata vyhlášením ve věstníku (36 0030), kat. č. 56799 převzata schválením k přímému používání Vydána: 2014-06 Elektrické drážní zařízení - Vlaková komunikační Cena: 125 Kč síť - Část 2-5: ETB - Páteřní vlaková síť Ethernet Maximální obrysy pro žárovky Vydána: 2015-08 Vydána: 1999-08 ČSN 36 0050-3 Cena: 945 Kč Cena: 731 Kč (36 0050), kat. č. 95339 Změny: A3 4.00t, A4 10.03t, A5 11.05t, A6 4.10t, Osvětlení podzemí dolů - Světelnětechnické ČSN EN 12665 A7 11.15t základy navrhování - Část 3: Oblast přechodu (36 0001), kat. č. 505650 porub-chodba převzata vyhlášením ve věstníku ČSN EN 61228 ed. 2 (36 0035), kat. č. 81961 Vydána: 2014-06 Světlo a osvětlení - Základní termíny a kritéria Cena: 125 Kč pro stanovení požadavků na osvětlení UV zářivky používané pro opalování - Metody Vydána: 2018-08 měření a specifikace ČSN EN 50490 Cena: 570 Kč Vydána: 2008-09 (36 0065), kat. č. 82554 Cena: 262 Kč Elektrická zařízení pro osvětlování letištních ČSN 36 0010 Změny: Z1 6.21t ploch a signalizaci - Technické požadavky na (36 0010), kat.
    [Show full text]
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018)
    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018) Technical Committee No. 1 “Quality assurance and social responsibility”, 11 standards No. Standard number English title 1. EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) 2. CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities 3. EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) 4. CWA 17145-2:2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework 5. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee 6. EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) 7. EN ISO 41001:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) 8. IWA 18:2016 Framework for integrated community-based life-long health and care services in aged societies 9. IWA 16:2015 International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport 10. ISO/IEC Guide 17:2016 ISO/IEC Guide 17:2016Guide for writing standards taking into account the needs of micro, small and medium-sized enterprises 11. ISO 37500:2014 Guidance on outsourcing Technical Committee No. 3 “Electrical and electronical materials”, 59 standards No. Standard number English title 1. EN 50288-12-1:2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - 1 Horizontal and building backbone cables 2.
    [Show full text]
  • Harmoneerituks Tunnistatud Standardid
    Avaldatud 16.08.2017 Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Ilmub alates 1993. aastast SISUKORD UUED STANDARDID JA STANDARDILAADSED DOKUMENDID ........................................ 3 ASENDATUD VÕI TÜHISTATUD EESTI STANDARDID JA STANDARDILAADSED DOKUMENDID .....................................................................................................................20 STANDARDIKAVANDITE ARVAMUSKÜSITLUS .................................................................27 TÕLKED KOMMENTEERIMISEL .........................................................................................46 ALGUPÄRASTE STANDARDITE JA STANDARDILAADSETE DOKUMENTIDE KOOSTAMINE .....................................................................................................................47 TÜHISTAMISKÜSITLUS ......................................................................................................48 TEADE EUROOPA STANDARDI OLEMASOLUST ..............................................................49 UUED EESTIKEELSED STANDARDID JA STANDARDILAADSED DOKUMENDID ...........50 STANDARDIPEALKIRJADE MUUTMINE.............................................................................52 UUED HARMONEERITUD STANDARDID ...........................................................................53 UUED STANDARDID
    [Show full text]