Components DISTRIBUTOR
Total Page:16
File Type:pdf, Size:1020Kb
The REGION’S LARGEST Essential Components DISTRIBUTOR www.cbtcompany.com Why essential components? Get the right components, at the right price, right when you need them. CBT offers you quality Allen-Bradley® essential components with 110 years of time-tested quality and durability. This catalog is your initial guide to selecting the best components to meet your specific appli- cation requirements. With Allen-Bradley®’s product portfolio, you will find the highest quality components at a fair price, an intuitive product selection, and fast delivery. Additionally, you will receive components that perform to your specifications, accompanied by the professional knowledge and support of CBT’s industry special- ists, you will receive components that perform to your specifications and make up the complete system you need. Smart devices include: Variable Frequency Servo Motor Condition Drives Drives Starters Monitoring Smart devices make data-driven productivity improvements using smart devices At its most basic level, The Connected Enterprise is about enabling the equipment, machinery, and devices in a manufacturing plant to provide real-time information that can help optimize plant operations. Rockwell Automation smart devices help you: • Increase productivity • Produce higher-quality products at lower costs • Support regulatory compliance • Identify and address worker-safety issues • Optimize supply chains Smart devices are the foundation of integrated control and information, providing seamless connectivity and the raw data for your Connected Enterprise. Real-time data Knowledge Current, Voltage, kWh, Analytics: Mean Time to Running Time, Repair, Predictive Temperature, Safety Maintenance, OEE Information Optimize Contextualization: Action: Production Output, More efficient Warnings/Alarms, process workflows, Energy Usage, Continuous Downtime Causal Improvement Power Motor Sensors Safety Monitoring Protection Industrial controls Bulletin 100 & 300 Contactors • Direct-on-line and reversing contactors • Built-in surge suppression with electronic coils • AC and DC coil control • IEC contactors from 5 amp miniature to 2650 amp large- frames • Safety contactors up to 750 Amps allen-bradley® smc-50 smart motor controller with internal bypass • Integrated Bypass – OR – Solid State Power Structures available • Expandable I/O and Sensor Capability, Built-In HIM Cradle, and Network Integration options • Sensor-less Linear Acceleration / Deceleration • Smart Motor Braking (SMBTM) • Full Power and Energy management, Real Time Clock Bulletin 1492 ClearMultiprint™ Marking System The ClearMultiprint™ marking system provides high-quality printing in an easy-to-use format. • Fast: Less than a minute to print and set a full row of marker cards • Easy: Marker Tag Rolls contain 100s of tags • Low-maintenance: Thermal transfer technology eliminates ink dry out issues • High-quality printing: 300dpi • Black/White printing: Provides high contrast on white marker tags and wire labels • Quick installation: Linked tags allow quick and easy placement Bulletin 854j/854k control tower™ stack lights • CE marked and cULus listed • Ingress protection type 4/4X/13, IP66 • Rated for indoor or outdoor use • Available in 24V AC/DC, 120V AC and 240V AC 50/60 Hz • Wide range of illumination options and technologies • Piezo electric sound modules that maintain the ingress rating when mounted in the stack • Cage-clamp style terminal blocks to ease the wiring of the bases in the field • Wide range of mounting options • Light and sound modules have color-coded nameplates to easily identify op- erating voltage and type of module. Nameplates are located on top for light mod- ules, or inside for sound modules • Includes a micro quick disconnect model for on-machine applications Safety components Guardmaster Safety Relays (GSR Family) 440R • A broad range of safety functions • Simple logic, reset, and timing configurations • Single-wire safety relay connection • Universal inputs • Compact 22.5 mm housings • Optional EtherNet/IP network interface GuardLink™ Technology GuardLink™ technology is a safety-based communications protocol that links safety to The Connected Enterprise. Allen-Bradley® Guardmaster® smart safety devices that feature GuardLink™ technology deliver information, advanced functionality, and flexibility. This technology helps enhance safety and increase machine and plant-wide efficiency. Features and Benefits • Helps minimize downtime and increase productivity • Improved troubleshooting and reduced downtime via contextual device-level diagnostics • No wiring changes or configuration required • Reduced inventory and installation costs • Seamless integration into EtherNet/IP™ through the Rockwell Automation Integrated Architecture® • TÜV Certified to PLe guardmaster™ 440C-CR30 Software Configurable safety Relay • Completely integrated with Allen-Bradley® Logix Controllers and can be configured using Studio 5000 Logix Designer® or Connected Components Workbench™ software • Suitable for applications up to PLe, Cat. 4 per ISO 13849-1 & SIL CL3 per IEC 62061 • Predefined function blocks • AND, OR, NAND, NOR, XOR Logic functions • 22-point embedded safety I/O • Supports as many as two Micro800® plug-in modules • Optional EtherNet/IP™ plug-in • Embedded communication via USB programming port and non- isolated serial port for RS-232 communications Safety components allen-bradley® GuardShield™ 450L-B Safety Light Curtain • Patented technology allows each transceiver to be used either as a transmitter or receiver via an innovative plug-in module • Active protective field provides sensing over the entire length of a transceiver • Wide range of protection heights 150…1950 mm (5.9…76.7 in.) in increments of 150 mm (0.5 ft) • Compact design 30 mm x 30 mm (1.18 in. x 1.18 in.) • Start mode, external device monitoring (EDM), scanning range are configured easily by DIP switches on the plug-in modules • Two LEDs on the transceiver indicate the best alignment position • Flexible mounting options allow for quick and easy installation • Monitor and troubleshoot via Connected Components Workbench™ software • IP65 enclosure rating • TÜV certified Ple, Type 4 IEC 61496-1/-2, SILcl3 per EN ISO 13849-1, IEC 62061 Resolutions: • Finger resolution (14 mm): 0.5 to 4 m (1.64…13.12 ft) • Hand resolution (30 mm): 0.9 to 6.5 m (2.95…21.33 ft) allen-bradley® guardShield™ 450L-E Safety Light Curtain • Extended features and functionality from the 450L-B such as cascading, built-in muting and blanking • Embedded functions configured quickly and easily via DIP switches or software, significantly reducing engineering effort. These include: - Muting, blanking, start mode, external device monitoring (EDM), scanning range • Leverages patented transceiver technology – each stick can be used as a transmitter or receiver via innovative plug-in modules • Enhanced Integrated Laser Alignment System (ILAS) for quick installation and reliable operation • Active protective field provides sensing over the entire length of a transceiver • Compact design 30 mm x 30 mm (1.18 in. x 1.18 in.) • Wide range of protection heights 150…1950 mm (5.9…76.7 in.) in increments of 150 mm (0.5 ft) • Supports cascading of multiple systems in series • Flexible mounting options allow for quick and easy installation • Monitor and troubleshoot via Connected Components Workbench™ software • IP65 enclosure rating • TÜV certified Type 4 IEC 61496-1/-2, Ple, SILcl3 per EN ISO 13849-1, IEC 62061 Resolutions: • Finger resolution (14 mm): 0.5 to 9 m (1.64…29.53 ft) • Hand resolution (30 mm): 0.9 to 16.2 m (2.95…53.15 ft) Safety components allen-bradley® guardmaster® lifeline™ 5 cable-pull switches • Solid-state operation – the first in the industry • Enhanced safety and productivity with microprocessor-based reliability and advanced diagnostics. • Performs at the highest safety ratings, even in series connection. - TÜV Approved - Ple, Cat 4 according to EN ISO 13849-1 - SIL CL3 per IEC 62061 and IEC 61508 - EN ISO 13850 and IEC 60947-5-5 - NFPA 79 • Rugged stainless steel (IP69K) or die cast aluminum (IP66) housings with optional e-stop button. • Supports long cable spans up to 100 m (328 ft.) • Wide operating temperature range -20 to +75° C (-4 to 167° F) • Electronic rope monitoring system monitors the cable span and compensates for thermal expansion • 270-degree visible LED indicators offer diagnostic for switch and tensioning setup • Built in margin indication helps reduce down time • OSSD outputs - 2 OSSD‘s for safety - 1 Auxiliary - 1 Tension/margin (8-pin model only) allen-bradley® guardmaster® 442g multifunctional access box • High holding force 2000N (Fzh tested to ISO 14119) is suitable for a wide-range of guarding applications. • Unique RFID coded bolt actuator achieves the high- est level of tamper resistance • Available in Power-to-Release or Power-to-Lock modules • Available with up to four controls and indicators in- cluding an E-stop push button • Optional escape release allows a person locked inside the safeguarded area to exit quickly and easily • Four bright LEDs provide status and diagnostics • Outputs for door position, bolt position, and lock sta- tus are available to the control system • Two integrated hasps available to affix padlocks • Can be operated as a standalone device or in series with other devices Safety components guardmaster® 440G-LZ Guard Locking Switches • TÜV certified to PLe, Cat. 4 (EN/ISO 13849-1), the highest level of safety for both door position and lock monitoring • An energy-efficient ‘green’