ISO Update Supplement to ISOfocus

February 2021

International Standards in process

TC 34 Food products ISO/CD 24583 Quantitative nuclear magnetic resonance spec- An International Standard is the result of an agreement between troscopy — Purity determination of organic the member bodies of ISO. A first important step towards an Interna- compounds used for foods and food products tional Standard takes the form of a committee draft (CD) - this is cir- — General requirements culated for study within an ISO technical committee. When consensus ISO/CD 27971 Cereals and cereal products — Common has been reached within the technical committee, the document is wheat (Triticum aestivum L.) — Determination sent to the Central Secretariat for processing as a draft International of alveograph properties of dough at constant Standard (DIS). The DIS requires approval by at least 75 % of the hydration from commercial or test flours and member bodies casting a vote. A confirmation vote is subsequently test milling methodology carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD Horizontal methods for molecular biomarker 16577.2 analysis — Terminology for molecular bio- marker analytical methods in agriculture and food production ISO/CD Molecular biomarker analysis — isothermal 22942-1.2 polymerase chain reaction (isoPCR) methods — Part 1: General requirements TC 35 Paints and varnishes ISO/CD 8504-4 Preparation of steel substrates before applica- CD registered tion of paints and related products — Surface preparation methods — Part 4: Acid pickling TC 37 Language and terminology Period from 01 January to 01 February 2021 ISO/CD Management of terminology resources — Data These documents are currently under consideration in the technical 12620-1 categories — Part 1: Specifications committee. ISO/DTS Management of terminology resources — Rep- They have been registred at the Central Secretariat. 24634 resentation of concept relations and subject fields in TBX TC 6 Paper, board and pulps ISO/CD Management of terminology resources — Ter- ISO/CD 5263-3 Pulps — Laboratory wet disintegration — Part 26162-3 minology databases — Part 3: Content 3: Disintegration of mechanical pulps at > 85 TC 38 Textiles degrees C ISO/CD 4333 Textiles — Determination of reduction activity ISO/CD 3037 Corrugated fibreboard — Determination of of specific proteins derived from pollen and edgewise crush resistance (non-waxed edge mite and other sources on textile products method) ISO/CD Textiles — Determination of formaldehyde TC 20 Aircraft and space vehicles 14184-3 — Part 3: Free and hydrolysed formaldehyde ISO/CD 8177 Aerospace — Omega clamps (saddle clamps) (water extraction method) — Determination by for fluid systems — Dimensions liquid chromatography ISO/CD 24330 Space systems — Rendezvous and Proximity TC 39 Machine tools Operations (RPO) and On Orbit Servicing (OOS) ISO/CD Test conditions for machining centres — Part — Programmatic principles and practices 10791-2.2 2: Geometric tests for machines with vertical TC 22 Road vehicles spindle (vertical Z-axis) ISO/CD 24089 Road vehicles — Software update engineering TC 42 Photography ISO/CD 24195 Road vehicles — Vocabulary for engineering of ISO/DIS 14548 Photography — Dimensions of glass plates starting devices TC 44 Welding and allied processes ISO/CD 34501 Road vehicles — Terms and definitions of test ISO/CD 11745 Brazing for aerospace applications — Qualifi- scenarios for automated driving systems cation test for brazers and brazing operators ISO/CD 34502 Road vehicles — Engineering framework and — Brazing of metallic components process of scenario-based safety evaluation TC 45 Rubber and rubber products TC 23 Tractors and machinery for agriculture ISO/CD 2322 Styrene-butadiene rubber (SBR) — Emulsion- and forestry and solution-polymerized types — Evaluation ISO/CD 5674 Tractors and machinery for agriculture and procedures forestry — Guards for power take-off (PTO) TC 48 Laboratory equipment drive-shafts — Strength and wear tests and ac- ISO/CD 5215 Laboratory plastic ware — Volumetric flasks ceptance criteria ISO/CD 3991 Agricultural machinery — Robotic feed sys- TC 54 Essential oils tems — Safety ISO/CD 3520 Essential oil of bergamot [Citrus bergamia ISO/CD Agricultural machinery — Safety — Part 19: Risso & Poit], Calabrian type 4254-19 Feed mixing machines TC 59 Buildings and civil engineering works TC 24 Particle characterization including ISO/CD Building information modelling — Information sieving 29481-3 delivery manual — Part 3: Data schema and classification ISO/CD 26824 Particle characterization of particulate systems — Vocabulary TC 61 Plastics

ISO Update, Supplement to ISO Focus -- March 2021 1 ISO/CD 6603-2 Plastics — Determination of puncture impact ISO/DTS Document management — Portable Document behaviour of rigid plastics — Part 2: Instru- 24654 Format — Non-Rectangular Links mented impact testing ISO/DTS Document management — Portable Document ISO/CD 4907-1 Plastics — Ion exchange resin — Part 1: Deter- 32001 Format — Extensions to Encryption and Hash mination of exchange capacity of acrylic anion Algorithm Support in ISO 32000-2 (PDF 2.0) exchange resins ISO/DTS Document management — Portable Document ISO/CD 4907-2 Plastics — Ion exchange resin — Part 2: Deter- 32002 Format — Extensions to Digital Signatures in mination of water content for anion exchange ISO 32000-2 (PDF 2.0) resins in hydroxide form TC 172 Optics and photonics ISO/CD 4907-3 Plastics — Ion exchange resin — Part 3: ISO/CD Optics and optical instruments — Field pro- Determination of exchange capacity of anion 17123-6 cedures for testing geodetic and surveying exchange resins in hydroxide form instruments — Part 6: Rotating lasers ISO/CD Plastics — Thermomechanical analysis (TMA) 11359-1 — Part 1: General principles TC 173 Assistive products ISO/DTR Assistive products for tissue integrity when ly- ISO/CD 4504 Plastics-Polyethylene (PE)-Determination of 20342-7 ing down — Part 7: Foam properties, charac- co-monomer content by NMR carbon-13 teristics and performance spectroscopy ISO/CD Wheelchairs — Part 31: Lithium-based battery ISO/CD Plastics — Wood-plastic recycled composites 7176-31 technology 20819-2 (WPRC) — Part 2: Test methods ISO/CD 23930 Fibre-reinforced plastic composites-Full TC 178 Lifts, escalators and moving walks section compressive test for pultruded FRP ISO/DTR Comparison of worldwide escalator and mov- Profiles 14799-1 ing walk safety standards — Part 1: Rule by TC 67 Materials, equipment and offshore rule comparison structures for petroleum, petrochemi- TC 182 Geotechnics cal and natural gas industries ISO/CD 24057 Array measurement of microtremors to esti- ISO/CD Petroleum and natural gas industries — Corro- mate shear wave velocity profile 24139-1 sion resistant alloy clad bends and fittings for TC 184 Automation systems and integration pipeline transportation system — Part 1: Clad bends ISO/CD Industrial automation systems and integration 14649-2 — Physical device control — Data model for TC 79 Light metals and their alloys computerized numerical controllers — Part 2: ISO/CD 4189 Magnesium and magnesium alloys — Deter- General process data mination of sodium — Inductively coupled ISO/CD Industrial automation systems and integration plasma atomic emission spectrometry 14649-3 — Physical device control — Data model for TC 83 Sports and other recreational facilities computerized numerical controllers — Part 3: and equipment Manufacturing features ISO/CD 4980 Risk assessment for sports and other recrea- ISO/CD Industrial automation systems and integration tional facilities and equipment 14649-4 — Physical device control — Data model for computerized numerical controllers — Part 4: TC 85 Nuclear energy, nuclear technologies, Process data for cutting and radiological protection ISO/CD Industrial automation systems and integration ISO/CD Nuclear energy, nuclear technologies, and 14649-5 — Physical device control — Data model for 12749-2 radiological protection — Vocabulary — Part 2: computerized numerical controllers — Part 5: Radiological protection Tools for cutting operations TC 92 Fire safety ISO/DTS Industrial automation systems and integration 10303-4000 — Product data representation and exchange ISO/DTR 5729 Evaluation of physical parameters of filter — Part 4000: Core Model paper substrates for the determination of the ignition propensity of cigarettes ISO/DTR Digital Validation by effective use of simulation 24463 TC 134 Fertilizers, soil conditioners and benefi- cial substances TC 190 Soil quality ISO/CD 8157 Fertilizers, soil conditioners and beneficial ISO/CD 5120 Soil quality — Determination of perchlorate in substances — Vocabulary soil using liquid chromatography-mass spec- trometry (LC-MS) TC 153 Valves TC 193 Natural gas ISO/CD 5640 Industrial valves — Mounting kits for part-turn valve actuator attachment ISO/CD 2611-1 Analysis of natural gas — Biomethane deter- mination of halogenated compounds — Part 1: TC 154 Processes, data elements and docu- HCl and HF content by ion chromatography ments in commerce, industry and ISO/CD 2612 Analysis of natural gas — Biomethane ¬— administration Determination of ammonia content by Tuneable ISO/CD 5054-1 Specification for an Enterprise Canonical Diode Laser Absorption Spectroscopy Model — Part 1: Architecture ISO/CD 2613-1 Analysis of natural gas — Silicon content of TC 163 Thermal performance and energy use biomethane — Part 1: Determination of total in the built environment silicon content by AAS ISO/CD 24260 Thermal insulation products——Hemp fiber ISO/CD 2613-2 Analysis of natural gas — Silicon content of bi- mat and board——Specification omethane — Part 2: Determination of siloxane content by Gas Chromatography Ion Mobility TC 171 Document management applications Spectrometry ISO/CD 4669.2 Document Management — Information clas- TC 198 Sterilization of health care products sification, marking and handling

2 ISO Update, Supplement to ISO Focus -- March 2021 ISO/CD Aseptic processing of health care products — ISO/DTS Security and resilience — Business continuity 13408-1 Part 1: General requirements 22318 management systems — Guidelines for supply chain continuity management ISO/CD 17665 Sterilization of health care products — Moist heat — Requirements for the development, ISO/CD 22379 Security and resilience — Guidelines for host- validation and routine control of a sterilization ing and organizing large citywide events process for medical devices TC 297 Waste collection and transportation TC 201 Surface chemical analysis management ISO/CD 23170 Surface Chemical Analysis —- Depth Profiling ISO/CD 24161 Terminology for waste collection and transpor- — Non-destructive depth profiling of nanoscale tation management heavy metal oxide thin films on Si substrates with medium energy ion scattering JTC 1 Information technology TC 211 Geographic information/Geomatics ISO/IEC CD Telecommunications and information exchange 21558-2.2 between systems — Future network architec- ISO/CD Geographic information — Metadata — Part 3: ture — Part 2: Proxy model based quality of 19115-3 XML schema implementation for fundamental service concepts ISO/IEC CD Telecommunications and information exchange ISO/CD Geographic information — Data quality — Part 21559-2.2 between systems — Future network protocols 19157-1 1: General requirements and mechanisms — Part 2: Proxy model based TC 212 Clinical laboratory testing and in vitro quality of service diagnostic test systems ISO/IEC DTR Software and systems engineering — Agile 24587 adoption considerations ISO/CD Medical laboratories — Requirements for qual- 15189.2 ity and competence ISO/IEC CD Card and security devices for personal identifi- 23220-1 cation — Building blocks for identity manage- TC 215 Health informatics ment via mobile devices — Part 1: Generic ISO/DTS Genomics informatics — Reliability assessment system architectures of mobile eID systems 22690 criteria for high-throughput gene-expression ISO/IEC DTR Information technology — Security techniques data 22216 — Introductory guidance on evaluation for IT TC 219 Floor coverings security ISO/CD 24335 Laminate floor coverings — Determination of ISO/IEC CD Information technology security techniques impact resistance 23837-1 — Security requirements, test and evaluation methods for quantum key distribution — Part TC 228 Tourism and related services 1: Requirements ISO/DPAS Tourism and related services — Measures to ISO/IEC CD Information technology security techniques 5643 reduce the spread of Covid-19 in the tourism 23837-2 — Security requirements, test and evaluation industry methods for quantum key distribution — Part TC 229 Nanotechnologies 2: Evaluation and testing methods ISO/DTR Nanotechnologies — Characterization of car- ISO/IEC CD Information technology — Radio frequency 23463 bon nanotube and carbon nanofiber aerosols in 18047-3 identification device conformance test meth- relation to inhalation toxicity tests ods — Part 3: Test methods for air interface communications at 13,56 MHz TC 238 Solid biofuels ISO/IEC CD Information technology — Automatic identifi- ISO/CD TS Solid biofuels — Determination of grindability 20248 cation and data capture techniques — Digital 21596 — Hardgrove type method for thermally treated signature data structure schema biomass fuels ISO/IEC CD Information technology — Metadata regis- TC 249 Traditional Chinese medicine 11179-35 tries (MDR) — Part 35: Metamodel for model ISO/CD 22585 Traditional Chinese Medicine–Codonopsis registration pilosula root ISO/IEC CD Information technology — User interface ISO/CD 23965 Traditional Chinese Medicine – Bupleurum 17549-3.2 guidelines on menu navigation — Part 3: Navi- chinense, Bupleurum scorzonrifolium and gation with 1-direction devices Bupleurum falcatum root ISO/IEC CD Information technology — User interfaces — TC 265 Carbon dioxide capture, transportation, 23859-1 Part 1: Guidance on making written text easy and geological storage to read and easy to understand ISO/DTR Geologic storage of carbon dioxide injection ISO/IEC CD Information technology — Accessibility consid- 27923 operations and infrastructure 29138-3 erations for people with disabilities — Part 3: Guidance on user needs mapping TC 276 Biotechnology ISO/IEC DTS Information technology — IT Enabled Services- ISO Biotechnology — Biobanking — Process and 30105-6 Business Process Outsourcing (ITES-BPO) 21709:2020/ quality requirements for establishment, mainte- lifecycle processes — Part 6: Guidelines on DAmd 1 nance and characterization of mammalian cell lines — Amendment 1 ISO/IEC DTR Information technology — Artificial intelligence ISO/DTS Biotechnology — Bioprocessing — General 24372 (AI) — Overview of computational approaches 23565 requirements and considerations for equip- for AI systems ment systems used in manufacturing of cellular therapeutic products TC 283 Occupational health and safety management ISO/CD 45002 Occupational health and safety management — General guidelines for the implementation of ISO 45001:2018 TC 292 Security and resilience DIS circulated

ISO Update, Supplement to ISO Focus -- March 2021 3 TC 23 Tractors and machinery for Period from 01 January to 01 February 2021 agriculture and forestry These documents have obtained substantial support within the ap- ISO 8082- Self-propelled machinery for propriate ISO technical committee. 1:2009/DAmd forestry — Laboratory tests and 1 performance requirements for 2021-04-05 They have been submitted to the ISO member bodies for voting by roll-over protective structures the date shown. — Part 1: General machines — * Available in English only Amendment 1 TC 27 Coal and coke ISO/DIS 567 Coke — Determination of bulk Vote density in a small container terminates 2021-04-21

TC 4 Rolling bearings (Revision of ISO 567:1995) ISO/DIS 5593 Rolling bearings — Vocabulary ISO/DIS 1014 Coke — Determination of true relative density, apparent relative 2021-03-31 density and porosity 2021-04-01

(Revision of ISO 5593:2019) (Revision of ISO 1014:1985) TC 6 Paper, board and pulps TC 28 Petroleum and related products, fuels and lu- ISO/DIS 6587 Paper, board and pulps — De- bricants from natural or termination of conductivity of aqueous extracts 2021-04-01 synthetic sources ISO/DIS Petroleum and related products (Revision of ISO 6587:1992) 4259-4 — Precision of measurement TC 8 Ships and marine methods and results — Part 4: 2021-04-06 Use of Statistical Control Charts technology to validate 'in-statistical-control' ISO/DIS Ships and marine technology status for the execution of a 23314-2 — Ballast water management standard test method in a single systems (BWMS) — Part 2: Risk 2021-04-05 laboratory assessment and risk reduc- ISO Petroleum products — Deter- tion of BWMS using electrolytic 20884:2019/ mination of sulfur content of methods DAmd 1 automotive fuels — Wavelength- 2021-04-20 IEC/IEEE Utility connections in port — Part dispersive X-ray fluorescence 80005-1:2019/ 1: High voltage shore connec- spectrometry — Amendment 1: DAmd 1 tion (HVSC) systems — General 2021-04-09 Addition of the SSD detector to requirements — Amendment 1: the Monochromatic Excitation Utility connections in port part of Table 1 TC 20 Aircraft and space vehicles TC 29 Small tools ISO/DIS 9418 Aerospace series — Rivets, ISO/DIS Coated abrasives — Determina- solid, in aluminium or alu- 6344-2 tion and designation of grain size minium alloys — Procurement 2021-04-02 distribution — Part 2: Macrogrit 2021-04-05 specification sizes P12 to P220 (Revision of ISO 9418:1998) (Revision of ISO 6344-2:1998, ISO 6344-1:1998) TC 22 Road vehicles ISO/DIS Coated abrasives — Determina- ISO/DIS Road vehicles — Extended vehi- 6344-3 tion and designation of grain size 20078-2 cle (ExVe) web services — Part distribution — Part 3: Microgrit 2021-04-05 2: Access 2021-04-01 sizes P240 to P5000

(Revision of ISO 6344-3:2013, (Revision of ISO 20078-2:2019) ISO 6344-1:1998) ISO/DIS Road vehicles — Extended vehi- ISO/DIS Tools for pressing — Gas 20078-3 cle (ExVe) web services — Part 11901-3 springs — Part 3: Gas spring 3: Security 2021-04-01 with increased spring force and 2021-04-01

compact built height (Revision of ISO 20078-3:2019) (Revision of ISO 11901-3:2014) ISO Road vehicles — Information for ISO/DIS Tools for pressing — Gas springs 20080:2019/ remote diagnostic support — 11901-4 — Part 4: Gas springs with DAmd 1 General requirements, definitions 2021-04-05 increased spring force and same 2021-04-01 and use cases — Amendment 1 built height ISO/DIS Road vehicles — Modular (Revision of ISO 11901-4:2014) 22900-2 vehicle communication interface ISO/DIS 5743 Pliers and nippers — General (MVCI) — Part 2: Diagnostic pro- 2021-04-22 technical requirements tocol data unit (D-PDU API) 2021-04-01 (Revision of ISO 22900-2:2017)

ISO/DIS 21448 Road vehicles — Safety of the (Revision of ISO 5743:2004) intended functionality ISO/DIS 5746 Pliers and nippers — Engineer's 2021-04-14 and "Lineman's" pliers — Di-

mensions and test values 2021-04-05 (Revision of ISO/PAS

21448:2019) (Revision of ISO 5746:2004)

4 ISO Update, Supplement to ISO Focus -- March 2021 ISO/DIS 8976 Pliers and nippers — Multiple ISO/DIS 19983 Rubber — Determination of slip joint pliers — Dimensions precision of test methods and test values 2021-04-01 2021-03-29

(Revision of ISO 8976:2004) (Revision of ISO 19983:2017) ISO/DIS 9343 Pliers and nippers — Slip joint TC 48 Laboratory equipment pliers — Dimensions and test ISO/DIS 4787 Laboratory glass and plastic values 2021-04-01 ware — Volumetric instruments

— Methods for testing of capac- 2021-04-16 (Revision of ISO 9343:2004) ity and for use TC 31 Tyres, rims and valves (Revision of ISO 4787:2010) ISO/DIS Industrial tyres and rims — Part TC 58 Gas cylinders 3739-2 2: Pneumatic tyres (metric series) ISO/DIS 23826 Gas cylinders — Ball valves — on 5 degrees tapered or flat base 2021-04-12 Specification and testing rims — Load ratings 2021-04-08 (Revision of ISO 3739-2:1992)

ISO/DIS Industrial tyres and rims — Part 3739-3 3: Rims TC 59 Buildings and civil engi- 2021-04-12 neering works ISO/DIS 21265 Building and civil engineer- (Revision of ISO 3739-3:2008) ing sealants — Assessment of TC 34 Food products the fungal growth on sealant 2021-04-06 surfaces ISO/DIS 13496 Meat and meat products — Detection and determination of ISO/DIS 23869 Building and civil engineering colouring agents 2021-04-08 sealants — Determination of self-levelling properties 2021-03-31 (Revision of ISO 13496:2000) TC 37 Language and terminology ISO/DIS 22057 Sustainability in buildings and civil engineering works – Data ISO/DIS Management of terminology templates for the use of EPDs for 2021-04-08 12620-2 resources — Data categories — construction products in BIM Part 2: Repositories 2021-04-14 TC 60 Gears ISO/DIS Language resource management ISO/DIS Gears — Wear and damage to 24623-2 — Corpus Query Lingua Franca 10825-1 gear teeth — Part 1: Terminology (CQLF) — Part 2: Ontology 2021-04-01 2021-04-15

(Revision of ISO 10825:1995) ISO/DIS 23155 Interpreting services — Confer- ence interpreting — Require- TC 61 Plastics ments and recommendations 2021-04-07 ISO/DIS 489 Plastics — Determination of refractive index ISO/DIS 24019 Simultaneous interpreting deliv- 2021-04-26 ery platforms — Requirements and recommendations 2021-04-01 (Revision of ISO 489:1999) ISO/DIS 3146 Plastics — Determination of (Revision of ISO/PAS melting behaviour (melting 24019:2020) temperature or melting range) 2021-04-15 TC 38 Textiles of semi-crystalline polymers by capillary tube and polarizing- ISO/DIS 2076 Textiles — Man-made fibres — microscope methods Generic names (Revision of ISO 3146:2000) 2021-04-14 ISO/DIS 3915 Plastics — Measurement of (Revision of ISO 2076:2013) resistivity of conductive plastics 2021-04-01 ISO 20932- Textiles — Determination of the 1:2018/DAmd elasticity of fabrics — Part 1: (Revision of ISO 3915:1981) 1 Strip tests — Amendment 1 2021-04-26 ISO/DIS 14782 Plastics — Determination of haze for transparent materials ISO/DIS 24281 Textiles — Biaxial tensile proper- 2021-04-26 ties of woven fabric — Deter- mination of maximum force and 2021-04-06 (Revision of ISO 14782:1999) elongation at maximum force using the grab method ISO/DIS Plastics/rubber — Polymer 13741-1 dispersions and rubber latices TC 43 Acoustics (natural and synthetic) — Deter- 2021-04-26 ISO/DIS Acoustics — Measurement of mination of residual monomers 3382-3 room acoustic parameters — and other organic components Part 3: Open plan offices 2021-04-23 by capillary-column gas chroma- tography — Part 1: Direct liquid (Revision of ISO 3382-3:2012) injection method (Revision of ISO 13741-1:1998) TC 45 Rubber and rubber products

ISO Update, Supplement to ISO Focus -- March 2021 5 TC 67 Materials, equipment and ISO 6405- Earth-moving machinery — offshore structures for pe- 1:2017/DAmd Symbols for operator controls troleum, petrochemical and 1 and other displays — Part 1: 2021-03-31 natural gas industries Common symbols — Amend- ment 1: Additional symbols ISO/DIS 10423 Petroleum and natural gas indus- ISO 6405- Earth-moving machinery — tries — Drilling and production 2:2017/DAmd Symbols for operator controls equipment — Wellhead and tree 2021-04-06 1 and other displays — Part 2: 2021-03-31 equipment Symbols for specific machines, (Revision of ISO 10423:2009) equipment and accessories TC 70 Internal combustion — Amendment 1: Additional engines symbols ISO/DIS Reciprocating internal combus- TC 130 Graphic technology 6798-3 tion engines — Measurement of ISO/DIS 14298 Graphic technology — Man- sound power level using sound 2021-04-13 agement of security printing pressure — Part 3: Survey processes 2021-04-09 method for use in situ TC 82 Mining (Revision of ISO 14298:2013) ISO/DIS 23872 Mining structures — Under- TC 131 Fluid power systems ground structures ISO/DIS 23840 Water hydraulics — Water- 2021-03-31 hydraulic pumps — Methods of testing and representing basic 2021-04-12 TC 92 Fire safety steady-state performance ISO/DIS Guidelines for assessing the TC 132 Ferroalloys 26367-3 adverse environmental impact of ISO/DIS 4298 Manganese ores and con- fire effluents — Part 3: Sampling 2021-04-26 centrates — Determination of and analysis manganese content — Potentio- 2021-04-26 TC 94 Personal safety -- Personal metric method protective equipment (Revision of ISO 4298:1984) ISO/DIS Eye and face protection — TC 134 Fertilizers, soil conditioners 12312-1 Sunglasses and related eyewear and beneficial substances — Part 1: Sunglasses for general 2021-04-05 ISO/DIS Fertilizers and soil conditioners use 22862.2 — Compound fertilizer — Gen- (Revision of ISO 12312-1:2013, eral requirements 2021-03-16 ISO 12312-1:2013/Amd 1:2015) ISO/DIS 23616 Cleaning, inspection and repair TC 135 Non-destructive testing of firefighters' personal protec- tive equipment (PPE) 2021-04-06 ISO/DIS 9712 Non-destructive testing — Quali- fication and certification of NDT personnel 2021-04-05 TC 106 Dentistry ISO/DIS 9680 Dentistry — Operating lights (Revision of ISO 9712:2012)

TC 138 Plastics pipes, fittings and 2021-04-20 valves for the transport of (Revision of ISO 9680:2014) fluids TC 107 Metallic and other inorgan- ISO/DIS 11295 Plastics piping systems used ic coatings for the rehabilitation of pipelines — Classification and overview 2021-04-26 ISO/DIS 24284 Metallic coatings – Corrosion of strategic and operational test method for decorative activities chrome plating under de-icing 2021-04-06 (Revision of ISO 11295:2017) salt environment TC 147 Water quality TC 122 Packaging ISO/DIS 23695 Water quality — Determination of ISO/DIS 23416 General specifications and ammonium nitrogen in water — testing methods for temperature- Small-scale sealed tube method 2021-04-05 sensitive medicinal packages 2021-04-26 in Good Distribution Practice ISO/DIS Water quality — Determination of principles 23696-1 nitrate in water using small-scale TC 123 Plain bearings sealed tubes — Part 1: Dimethyl- 2021-04-05 ISO/DIS Plain bearings — Thin-walled phenol based method 3548-1 half bearings with or without ISO/DIS Water quality — Determination of flange — Part 1: Tolerances, 2021-04-02 23696-2 nitrate in water using small-scale design features and methods sealed tubes — Part 2: Chromo- 2021-04-05 of test tropic acid based method (Revision of ISO 3548-1:2014) ISO/DIS Water quality — Determination TC 127 Earth-moving machinery 23697-1 of total nitrogen (TNb) in water using small-scale sealed tubes 2021-04-05 ISO Earth-moving machinery — Lab- — Part 1: Dimethylphenol based 3164:2013/ oratory evaluations of protective method DAmd 1 structures — Specifications for 2021-03-26 deflection-limiting volume — Amendment 1

6 ISO Update, Supplement to ISO Focus -- March 2021 ISO/DIS Water quality — Determination ISO/DIS 16190 Footwear — Critical substances 23697-2 of total nitrogen (TNb) in water potentially present in footwear using small-scale sealed tubes 2021-04-08 and footwear components — 2021-04-01 — Part 2: Chromotropic acid Test method to quantitatively based method determine polycyclic aromatic hydrocarbons (PAH) in footwear TC 172 Optics and photonics materials ISO/DIS 17328 Optics and photonics — Optical (Revision of ISO/TS 16190:2013) materials and components — Test method for refractive index 2021-04-02 TC 256 Pigments, dyestuffs and of infrared optical materials extenders (Revision of ISO 17328:2014) ISO/DIS 787-2 General methods of test for pig- TC 182 Geotechnics ments and extenders — Part 2: Determination of matter volatile 2021-04-21 ISO 17892- Geotechnical investigation and at 105 °C 12:2018/DAmd testing — Laboratory testing of (Revision of ISO 787-2:1981) 1 soil — Part 12: Determination 2021-04-05 of liquid and plastic limits — ISO/DIS 23157 Determination of the silanol Amendment 1 group content on the surface of fumed silica — Reaction gas 2021-04-20 TC 184 Automation systems and chromatographic method integration TC 260 Human resource ISO/DIS Data quality — Part 66: Data management 8000-66 quality management: As- sessment indicators for data 2021-04-26 ISO/DIS 30422 Human Resource Management – processing in manufacturing Learning and development operations 2021-04-05

TC 198 Sterilization of health care TC 264 Fireworks products ISO/DIS Fireworks — Test methods for ISO 11137- Sterilization of health care 22863-11 determination of specific chemi- 2:2013/DAmd products — Radiation — Part cal substances — Part 11: Phos- 2021-04-08 1 2: Establishing the sterilization 2021-04-26 phorus content by Inductively dose — Amendment 1 Coupled Plasma Optical Emis- TC 199 Safety of machinery sion Spectrometry (ICP-OES) ISO/DIS 14119 Safety of machinery — Inter- ISO/DIS Fireworks — Test methods locking devices associated with 22863-12 for determination of specific guards — Principles for design 2021-03-26 chemical substances — Part 2021-04-08 and selection 12: Picrates and picric acid (Revision of ISO 14119:2013) by high performance liquid chromatography TC 204 Intelligent transport systems TC 300 Solid recovered materials, ISO/DIS 4426 Intelligent transport systems including solid recovered — Lower layer protocols for fuels usage in the European digital 2021-03-30 ISO/DIS 21646 Solid recovered fuels — Sample tachograph preparation TC 206 Fine ceramics 2021-03-29

ISO/DIS 24448 Fine ceramics (advanced ceramics, advanced technical TC 314 Ageing societies ceramics) — LED light source 2021-04-01 ISO/DIS 23623 Ageing Societies — Frame- for testing semiconducting pho- work for Dementia-inclusive tocatalytic materials used under communities 2021-04-05 indoor lighting environment TC 215 Health informatics CASCO Committee on conformity IEC/DIS Health software — Software life assessment 62304.3 cycle processes ISO/IEC DIS Conformity assessment — Gen- 2021-03-26 17030 eral requirements for third-party marks of conformity 2021-04-22 (Revision of IEC 62304:2006, IEC 62304:2006/Amd 1:2015) (Revision of ISO/IEC TC 216 Footwear 17030:2003) ISO/DIS 16189 Footwear — Critical substances JTC 1 Information technology potentially present in footwear ISO/IEC DIS Information technology — and footwear components — 2021-04-02 5965 Swordfish Scalable Storage Test method to quantitatively Management API Specification 2021-04-14 determine dimethylformamide in footwear materials (Revision of ISO/TS 16189:2013) ISO/IEC DIS Information technology — Open 30118-1 Connectivity Foundation (OCF) Specification — Part 1: Core 2021-04-20 specification (Revision of ISO/IEC 30118-1:2018)

ISO Update, Supplement to ISO Focus -- March 2021 7 ISO/IEC DIS Information technology — Open ISO/IEC DIS Information technology – Open 30118-2 Connectivity Foundation (OCF) 30118-17 Connectivity Foundation (OCF) Specification — Part 2: Security 2021-04-20 — Part 17: OCF resource 2021-04-20 specification to Zigbee cluster mapping (Revision of ISO/IEC specification 30118-2:2018) ISO/IEC DIS Information technology – Open ISO/IEC DIS Information technology — Open 30118-18 Connectivity Foundation (OCF) 30118-3 Connectivity Foundation (OCF) — Part 18: OCF Resource to 2021-04-20 Specification — Part 3: Bridging 2021-04-20 Z-wave mapping specification specification ISO/IEC/IEEE Software engineering — Soft- (Revision of ISO/IEC DIS 14764 ware life cycle processes 30118-3:2018) — Maintenance 2021-04-15 ISO/IEC DIS Information technology — Open 30118-4 Connectivity Foundation (OCF) (Revision of ISO/IEC Specification — Part 4: Resource 2021-04-20 14764:2006) type specification ISO/IEC DIS Systems and software engineer- (Revision of ISO/IEC 29110-6-1 ing — Lifecycle profiles for Very 30118-4:2018) Small Entities (VSEs) — Part 6-1: 2021-04-12 ISO/IEC DIS Information technology — Open Software engineering — Specific 30118-5 Connectivity Foundation (OCF) Space Profile Specifications Specification — Part 5: Smart 2021-04-20 ISO/IEC DIS Information technology — Secu- home device specification 15946-5 rity techniques — Cryptographic (Revision of ISO/IEC techniques based on elliptic 2021-04-15 30118-5:2018) curves — Part 5: Elliptic curve ISO/IEC DIS Information technology — Open generation 30118-6 Connectivity Foundation (OCF) (Revision of ISO/IEC Specification — Part 6: Resource 2021-04-20 15946-5:2017) to AllJoyn interface mapping ISO/IEC DIS Information security, cyberse- specification 27002 curity and privacy protection — (Revision of ISO/IEC Information security controls 2021-04-22 30118-6:2018) ISO/IEC DIS Information Technology – Open (Revision of ISO/IEC 30118-7 Connectivity Foundation (OCF) 27002:2013, ISO/IEC — Part 7: Wi-Fi easy setup 2021-04-20 27002:2013/Cor 1:2014, ISO/IEC specification 27002:2013/Cor 2:2015) ISO/IEC DIS Information technology – Open ISO/IEC Information technology — Ge- 30118-8 Connectivity Foundation (OCF) 13818-1:2019/ neric coding of moving pic- — Part 8: OCF resource to 2021-04-20 DAmd 3 tures and associated audio 2021-04-15 oneM2M resource mapping information — Part 1: Systems specification — Amendment 3: Carriage of EVC in MPEG-2 Systems and ISO/IEC DIS Information technology – Open update of the MPEG-H 3D Audio 30118-9 Connectivity Foundation descriptor (OCF) — Part 9: Core optional 2021-04-20 specification ISO/IEC Information technology — Cod- 14496- ing of audio-visual objects ISO/IEC DIS Information technology – Open 12:2020/DAmd — Part 12: ISO base media 2021-04-14 30118-10 Connectivity Foundation (OCF) 1 file format — Amendment 1: — Part 10: Cloud API for cloud 2021-04-20 Support for new media types services specification (haptics, volumetric visual) and ISO/IEC DIS Information technology – Open other improvements 30118-11 Connectivity Foundation (OCF) ISO/IEC DIS Information technology — Mul- — Part 11: Device to cloud 2021-04-20 15938-17 timedia content description inter- services specification face — Part 17: Compression of 2021-04-15 ISO/IEC DIS Information technology – Open neural networks for multimedia 30118-12 Connectivity Foundation (OCF) content description and analysis — Part 12: Cloud security 2021-04-20 ISO/IEC DIS Information technology — Multi- specification 21000-22 media framework (MPEG-21) — ISO/IEC DIS Information technology – Open Part 22: User Description 2021-04-14 30118-13 Connectivity Foundation (OCF) — Part 13: Onboarding tool 2021-04-20 (Revision of ISO/IEC specification 21000-22:2019) ISO/IEC DIS Information technology – Open ISO/IEC FDIS Information technology — Ple- 30118-14 Connectivity Foundation (OCF) 21794-2/ noptic image coding system — Part 14: OCF Resource to 2021-04-20 DAmd 1 (JPEG Pleno) — Part 2: Light 2021-03-30 BLE mapping specification field coding — Amendment 1: ISO/IEC DIS Information technology – Open Profiles and Levels for JPEG 30118-15 Connectivity Foundation (OCF) Pleno Light Field Coding System — Part 15: OCF Resource to 2021-04-20 ISO/IEC Information technology — EnOcean mapping specification 23000- Multimedia application for- ISO/IEC DIS Information technology – Open 22:2019/DAmd mat (MPEG-A) — Part 22: 2021-04-20 30118-16 Connectivity Foundation (OCF) 2 Multi-image application format — Part 16: OCF resource to 2021-04-20 (MIAF) — Amendment 2: HEVC UPlus mapping specification Advanced HDR profile and other clarifications

8 ISO Update, Supplement to ISO Focus -- March 2021 ISO/IEC Information technology — MPEG ISO 23212 Ships and marine technology 23001- systems technologies — Part 14: — Flange connection for fuel 14:2019/DAmd Partial file format — Amendment 2021-04-15 and lubrication oil bunkering — 1 1: Support for HTTP entities, en- Basic dimensions and technical hanced file type and byte-range requirements priorities TC 10 Technical product ISO/IEC DIS Information technology — MPEG documentation 23001-16 systems technologies — Part 16: Derived visual tracks in the ISO 2021-04-15 ISO/FDIS 7083 Technical product documenta- base media file format tion — Symbols used in techni- cal product documentation — 2021-03-23 ISO/IEC DIS Information technology — High Proportions and dimensions 23008-1/ efficiency coding and media de- (Revision of ISO 7083:1983) DAmd 2 livery in heterogeneous environ- 2021-04-05 ments — Part 1: MPEG media TC 20 Aircraft and space vehicles transport (MMT) — Amendment ISO 16781 Space systems — Simulation 2: Carriage of EVC in MMT requirements for control system ISO/IEC DIS Information technology — Cod- 23090-18 ed representation of immersive (Revision of ISO 16781:2013) media — Part 18: Carriage of 2021-03-30 ISO/FDIS Space systems — Pressure Geometry-based Point Cloud 24638 components and pressure sys- Compression Data tem integration 2021-03-29 ISO/IEC DIS Information technology — Cod- 23091-2 ing-independent code points — (Revision of ISO 24638:2008) Part 2: Video 2021-04-05 TC 21 Equipment for fire protec- tion and fire fighting (Revision of ISO/IEC 23091-2:2019) ISO/FDIS Fire protection — Automatic 6182-1 sprinkler systems — Part 1: ISO/IEC DIS Information technology — Inter- Requirements and test methods 2021-03-26 23093-2 net of media things — Part 2: for sprinklers Discovery and communication 2021-04-01 (Revision of ISO 6182-1:2014) API (Revision of ISO/IEC TC 22 Road vehicles 23093-2:2019) ISO/FDIS Road vehicles — Vehicle inter- ISO/IEC DIS Information technology — Inter- 20730-1.2 face for electronic Periodic Tech- 23093-3 net of media things — Part 3: nical Inspection (ePTI) — Part 1: 2021-03-15 Media data formats and APIs 2021-04-13 Application and communication requirements (Revision of ISO/IEC ISO/TS 16951 Road vehicles — Ergonomic 23093-3:2019) aspects of transport informa- ISO/IEC DIS Information technology — Gen- tion and control systems (TICS) 23094-4 eral video coding — Part 4: — Procedures for determining Conformance and Reference 2021-04-09 priority of on-board messages software for Essential Video presented to drivers Coding (Revision of ISO/TS 16951:2004) ISO/IEC DIS Information technology — TC 24 Particle characterization 19763-16 Metamodel framework for including sieving interoperability (MFI) — Part 16: 2021-04-05 ISO 13319-1 Determination of particle size Metamodel for document model distribution — Electrical sensing registration zone method — Part 1: Aperture/

orifice tube method (Revision of ISO 13319:2007) TC 28 Petroleum and related products, fuels and lu- bricants from natural or synthetic sources FDIS circulated ISO Determination of flash point — 2719:2016/ Pensky-Martens closed cup Amd 1 method — Amendment 1: Ther- mometers correction Period from 01 January to 01 February 2021 ISO 6249 Petroleum products — Deter- These Final draft International Standards have been submitted to the mination of thermal oxidation ISO member bodies for formal approval by the date shown stability of gas turbine fuels * Available in English only (Revision of ISO 6249:1999) ISO/FDIS 9038 Determination of sustained com- bustibility of liquids Vote 2021-03-19 terminates (Revision of ISO 9038:2013) TC 8 Ships and marine TC 31 Tyres, rims and valves technology ISO 5775-2 Bicycle tyres and rims — Part 2: Rims

ISO Update, Supplement to ISO Focus -- March 2021 9 (Revision of ISO 5775-2:2015) ISO/FDIS Acoustics — Acoustic quality of TC 34 Food products 22955 open office spaces 2021-03-29 ISO 771 Oilseed meals — Determination

of moisture and volatile matter content 2021-02-26 ISO/FDIS Acoustics — Laboratory meas- 10140-2 urement of sound insulation (Revision of ISO 771:1977) of building elements — Part 2: 2021-03-23 Measurement of airborne sound ISO/FDIS Microbiology of the food chain insulation 6888-1 — Horizontal method for the (Revision of ISO 10140-2:2010) enumeration of coagulase- 2021-03-26 positive staphylococci (Staphy- ISO/FDIS Acoustics — Laboratory meas- lococcus aureus and other 10140-3 urement of sound insulation species) — Part 1: Method using of building elements — Part 3: 2021-03-23 Baird-Parker agar medium Measurement of impact sound (Revision of ISO 6888-1:1999, insulation ISO 6888-1:1999/Amd 1:2003, (Revision of ISO 10140-3:2010, ISO 6888-1:1999/Amd 2:2018) ISO 10140-3:2010/Amd 1:2015) ISO/FDIS Microbiology of the food chain ISO/FDIS Acoustics — Laboratory meas- 6888-2 — Horizontal method for the 10140-4 urement of sound insulation enumeration of coagulase-posi- 2021-03-26 of building elements — Part 4: 2021-03-23 tive staphylococci (Staphylococ- Measurement procedures and cus aureus and other species) requirements — Part 2: Method using rabbit (Revision of ISO 10140-4:2010) plasma fibrinogen agar medium ISO/FDIS Acoustics — Laboratory meas- (Revision of ISO 6888-2:1999, 10140-5 urement of sound insulation ISO 6888-2:1999/Amd 1:2003) of building elements — Part 5: 2021-03-25 ISO 15216- Microbiology of the food chain Requirements for test facilities 1:2017/Amd 1 — Horizontal method for deter- and equipment mination of hepatitis A virus and (Revision of ISO 10140-5:2010/ norovirus using real-time RT-PCR Amd 1:2014, ISO 10140-5:2010) — Part 1: Method for quantifica- TC 44 Welding and allied tion — Amendment 1 processes ISO 22994 Coffee extracts — Determination ISO 5179:2021 Investigation of brazeability with of the dry matter content of cof- spreading and gap-filling test fee extracts — Sea sand method

of liquid or pasty coffee extracts TC 35 Paints and varnishes TC 45 Rubber and rubber products ISO Paints and varnishes — Electro- 22553-13:2021 deposition coatings — Part ISO/FDIS 1402 Rubber and plastics hoses and 13: Determination of re-solving hose assemblies — Hydrostatic behaviour testing 2021-03-19

ISO Paints and varnishes — Electro- (Revision of ISO 1402:2009) 22553-14:2021 deposition coatings — Part 14: Deposition behaviour ISO/FDIS 7233 Rubber and plastics hoses and hose assemblies — Determina- TC 38 Textiles tion of resistance to vacuum 2021-03-18 ISO/FDIS 1140 Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes (Revision of ISO 7233:2016) 2021-03-21 ISO 14557 Fire-fighting hoses — Rubber and plastics suction hoses and (Revision of ISO 1140:2012) hose assemblies 2021-03-03 ISO/FDIS 1141 Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes (Revision of ISO 14557:2002, 2021-03-21 ISO 14557:2002/Amd 1:2007) ISO/FDIS Rubber and plastics hoses and (Revision of ISO 1141:2012) 23384 hose assemblies, wire or textile ISO/FDIS 1346 Fibre ropes — Polypropylene reinforced types with working 2021-03-18 split film, monofilament and mul- pressure equal or above 70 MPa tifilament (PP2) and polypropyl- 2021-03-21 (700 bar) — Specification ene high-tenacity multifilament (Revision of ISO 19385:2017/ (PP3) — 3-, 4-, 8- and 12-strand Amd 1:2019, ISO 19385:2017) ropes TC 46 Information and (Revision of ISO 1346:2012) documentation TC 43 Acoustics ISO/FDIS Information and documenta- ISO Acoustics — Determination of 24083 tion — International archives 8297:1994/ sound power levels of multi- statistics 2021-03-24 FDAmd 1 source industrial plants for evalu- 2021-03-23 ation of sound pressure levels in TC 59 Buildings and civil engi- the environment — Engineering neering works method — Amendment 1 ISO 6927 Building and civil engineering sealants — Vocabulary

(Revision of ISO 6927:2012)

10 ISO Update, Supplement to ISO Focus -- March 2021 ISO 9046 Building and civil engineering ISO/FDIS Water-source heat pumps — sealants — Determination of 13256-1 Testing and rating for perfor- adhesion/cohesion properties at mance — Part 1: Water-to-air 2021-03-24 constant temperature and brine-to-air heat pumps (Revision of ISO 9046:2002) (Revision of ISO 13256-1:1998) ISO Building and civil engineering ISO/FDIS Water-source heat pumps — 13638:2021 sealants — Determination of re- 13256-2 Testing and rating for perfor- sistance to prolonged exposure mance — Part 2: Water-to-water 2021-03-24 to water and brine-to-water heat pumps TC 60 Gears (Revision of ISO 13256-2:1998) ISO/TS Calculation of load capacity of TC 92 Fire safety 10300-20 bevel gears — Part 20: Calcula- ISO/TS FTIR analysis of fire effluents in tion of scuffing load capacity — 21397:2021 cone calorimeter tests Flash temperature method ISO/TR Calculation of load capacity of ISO/TS Fire safety engineering — Selec- 10300-32 bevel gears — Part 32: ISO rat- 16733-2 tion of design fire scenarios and ing system for bevel and hypoid design fires — Part 2: Design gears — Sample calculation for fires scuffing load capacity TC 96 Cranes TC 61 Plastics ISO 10245-1 Cranes — Limiting and indicating ISO 844 Rigid cellular plastics — De- devices — Part 1: General termination of compression properties (Revision of ISO 10245-1:2008) (Revision of ISO 844:2014) TC 106 Dentistry ISO/FDIS Plastics — Organic recycling — ISO/FDIS Dentistry — Endodontic instru- 17088 Specifications for compostable 3630-3 ments — Part 3: Compactors plastics 2021-03-25 2021-03-18

(Revision of ISO 17088:2012) (Revision of ISO 3630-3:2015) TC 70 Internal combustion TC 107 Metallic and other inorgan- engines ic coatings ISO/FDIS Reciprocating internal combus- ISO/FDIS 1463 Metallic and oxide coatings — 8178-5 tion engines — Exhaust emission Measurement of coating thick- measurement — Part 5: Test 2021-03-16 ness — Microscopical method 2021-03-16 fuels

(Revision of ISO 8178-5:2015) (Revision of ISO 1463:2003) TC 71 Concrete, reinforced ISO 23131 Ellipsometry — Principles concrete and pre-stressed concrete 2021-02-26 ISO/FDIS Quality control for batching and 22873 mixing steel fibre-reinforced ISO/FDIS Carbon based films — Deter- concretes 2021-03-20 23216 mination of optical properties of amorphous carbon films by 2021-03-16 ISO Test methods for discrete spectroscopic ellipsometry 23523:2021 polymer fibre for fibre-reinforced TC 120 Leather cementitious composites 2021-02-16 ISO Leather — Leather for dress 14930:2012/ gloves — Specification — ISO Requirements for seismic as- FDAmd 1 Amendment 1: Colour fastness 2021-03-25 16711:2021 sessment and retrofit of concrete to to-and-fro rubbing structures ISO/FDIS Leather — Leather for apparel TC 76 Transfusion, infusion 14931 (excluding furs) — Specifications and injection, and blood and sampling procedures 2021-03-15 processing equipment for medical and pharmaceuti- (Revision of ISO 14931:2015) cal use ISO 20940 Leather — Crust full chrome up- ISO/FDIS Transfer sets for pharmaceutical per leather — Specifications and 22413 preparations — Requirements test methods 2021-02-26 and test methods 2021-03-22 TC 121 Anaesthetic and respiratory (Revision of ISO 22413:2010) equipment TC 79 Light metals and their ISO Medical electrical equipment alloys 80601-2-87 — Part 2-87: Particular require- ISO 23700 Wrought magnesium and mag- ments for basic safety and 2021-03-01 nesium alloys — Rolled plates essential performance of high- and sheets frequency ventilators TC 86 Refrigeration and TC 122 Packaging air-conditioning ISO Transport packaging — Temper- 22982-1:2021 ature-controlled transport pack- ages for parcel shipping — Part 1: General requirements

ISO Update, Supplement to ISO Focus -- March 2021 11 ISO 22982-2 Transport Packaging — Tem- ISO 23156 Ferronickels — Determination perature controlled transport of phosphorus, manganese, packages for parcel shipping — chromium, copper and cobalt Part 2: General specifications of contents — Inductively coupled testing plasma optical emission spectro- metric method ISO/TR 18568 Packaging and the environ- ment — Marking for material TC 163 Thermal performance and identification energy use in the built TC 123 Plain bearings environment ISO/FDIS Plain bearings — Bearing fatigue ISO Hygrothermal performance of 7905-1 — Part 1: Plain bearings in test 24353:2008/ building materials and products rigs and in applications under 2021-03-26 Amd 1 — Determination of moisture conditions of hydrodynamic adsorption/desorption properties lubrication in response to humidity variation (Revision of ISO 7905-1:1995) — Amendment 1 TC 138 Plastics pipes, fittings and TC 172 Optics and photonics valves for the transport of ISO/FDIS Optics and Photonics — Bulk fluids 23364 absorption optical filters 2021-03-23 ISO 10952 Glass-reinforced thermosetting

plastics (GRP) pipes and fittings — Determination of the resist- TC 173 Assistive products ance to chemical attack for the ISO/FDIS Assistive products for walking inside of a section in a deflected 11199-1 manipulated by both arms — condition Requirements and test methods 2021-03-29 (Revision of ISO 10952:2014) — Part 1: Walking frames ISO/TS Assessment of conformity of (Revision of ISO 11199-1:1999) 23818-3 plastics piping systems for ISO 10542- Technical systems and aids the rehabilitation of existing 1:2012/Amd 1 for disabled or handicapped pipelines — Part 3: Unplasticised persons — Wheelchair tiedown 2021-02-26 poly(vinyl chloride) (PVC-U) and occupant-restraint systems material — Part 1: Requirements and TC 146 Air quality test methods for all systems — Amendment 1: Annexes K, L, M ISO/FDIS Workplace air — Analysis of 23506 airborne water immiscible min- TC 174 Jewellery and precious eral oil droplets and vapor with 2021-03-19 metals Fourier — Transform infrared spectroscopy ISO 11426 Jewellery and precious metals — Determination of gold — Cupel- TC 147 Water quality lation method (fire assay) ISO/FDIS 6107 Water quality — Vocabulary (Revision of ISO 11426:2014) TC 176 Quality management and 2021-03-19 quality assurance

(Revision of ISO 6107-1:2004, ISO Quality management systems ISO 6107-2:2006/Amd 1:2012, 10013:2021 — Guidance for documented ISO 6107-8:1993/Amd 1:2001, information ISO 6107-3:1993/Amd 1:2001, ISO/FDIS Quality management systems ISO 6107-2:2006, ISO 6107- 10014 — Managing an organization for 3:1993, ISO 6107-4:1993, quality results — Guidance for 2021-03-16 ISO 6107-5:2004, ISO 6107- realizing financial and economic 6:2004, ISO 6107-7:2006, ISO benefits 6107-8:1993) (Revision of ISO 10014:2006, ISO/FDIS Water quality — Iron-55 — Test ISO 10014:2006/Cor 1:2007) 22515 method using liquid scintillation TC 182 Geotechnics counting 2021-03-19 ISO 22282-4 Geotechnical investigation and testing — Geohydraulic testing TC 150 Implants for surgery — Part 4: Pumping tests ISO 13779- Implants for surgery — Hy- (Revision of ISO 22282-4:2012) 3:2018/Amd droxyapatite — Part 3: Chemical TC 183 Copper, lead, zinc 1:2021 analysis and characterization and nickel ores and of crystallinity ratio and phase concentrates purity — Amendment 1 ISO/FDIS Copper, lead, zinc and nickel TC 153 Valves 12743 concentrates — Sampling proce- ISO/FDIS Industrial valves - Metallic but- dures for determination of metal 2021-03-26 10631 terfly valves and moisture content 2021-03-29 (Revision of ISO 12743:2018)

TC 198 Sterilization of health care (Revision of ISO 10631:2013) products TC 155 Nickel and nickel alloys

12 ISO Update, Supplement to ISO Focus -- March 2021 ISO/TS 22456 Sterilization of healthcare prod- ISO/TS Nanotechnologies — Structural ucts — Microbiological meth- 21356-1 characterization of graphene — ods— Guidance on conducting Part 1: Graphene from powders bioburden determinations and and dispersions tests of sterility for biologics and TC 232 Education and learning tissue-based products services TC 201 Surface chemical analysis ISO/FDIS Education and learning services ISO/TR 15969 Surface chemical analysis — 29994 — Requirements for distance Depth profiling — Measurement learning 2021-03-16 of sputtered depth (Revision of ISO/TR 15969:2001) TC 258 Project, programme and TC 202 Microbeam analysis portfolio management ISO 23692 Microbeam analysis - Electron ISO 21500 Project, programme and portfolio probe microanalysis - Quantita- management — Context and tive analysis of Mn dendritic 2021-03-02 concepts segregation in continuously cast (Revision of ISO 21500:2012) steel product TC 260 Human resource ISO/FDIS Microbeam analysis — Analytical management 23420 electron microscopy — Method for the determination of energy 2021-03-26 ISO/TS 24178 Human resource management resolution for electron energy — Organizational culture metrics loss spectrum analysis cluster ISO/TS 21383 Microbeam analysis — Scanning ISO/FDIS Human resource management — electron microscopy — Qualifi- 30415 Diversity and inclusion cation of the scanning electron 2021-03-24 microscope for quantitative measurements ISO/TS 30425 Human resource management TC 204 Intelligent transport — Workforce availability metrics systems cluster ISO 14907-2 Electronic fee collection — Test ISO/TS 30427 Human resource management — procedures for user and fixed Costs metrics cluster equipment — Part 2: Conform- ance test for the on-board unit ISO/TS 30431 Human resource management — application interface Leadership metrics cluster (Revision of ISO/TS 14907-2:2016) ISO/TS 30432 Human resource management — ISO/FDIS Intelligent transport systems — Workforce productivity metrics 20684-1 Roadside modules SNMP data cluster interface — Part 1: Overview 2021-03-22 TC 264 Fireworks TC 207 Environmental ISO 22863-4 Fireworks — Test methods for determination of specific chemi- management cal substances — Part 4: Analy- ISO/FDIS Greenhouse gas management sis of lead and lead compounds 14097 and related activities — Frame- by X-ray fluorescence spectrom- work including principles and 2021-03-29 etry (XRF) requirements for assessing ISO 22863-5 Fireworks — Test methods for and reporting investments and determination of specific chemi- financing activities related to cal substances — Part 5: Analy- climate change sis of lead and lead compounds TC 210 Quality management and by inductively coupled plasma corresponding general as- spectrometry (ICP) pects for medical devices TC 282 Water reuse ISO 80369-7 Small-bore connectors for liquids ISO 23043 Evaluation methods for indus- and gases in healthcare ap- trial wastewater treatment reuse plications — Part 7: Connectors processes for intravascular or hypodermic applications TC 301 Energy management and (Revision of ISO 80369-7:2016) energy savings TC 215 Health informatics ISO/FDIS Energy management systems 50003 — Requirements for bodies ISO/TR 21332 Health informatics — Cloud providing audit and certification 2021-03-19 computing considerations for the of energy management systems security and privacy of health (Revision of ISO 50003:2014) information systems TC 309 Governance of ISO/TR 24291 Health informatics — Applica- organizations tions of machine learning tech- nologies in imaging and other ISO 37301 Compliance management medical applications systems — Requirements with guidance for use 2021-02-26 TC 229 Nanotechnologies TMBG Technical Management Board - groups

ISO Update, Supplement to ISO Focus -- March 2021 13 IWA 33-3 Technical guidelines for the development of small hydro- power plants — Part 3: Design principles and requirements JTC 1 Information technology ISO/IEC FDIS Information technology — Tele- 21481 communications and information Standards published exchange between systems — 2021-03-15 Near field communication inter- face and protocol 2 (NFCIP-2) New International Standards published between 01 January and 01 (Revision of ISO/IEC February 2021 21481:2012) ISO/IEC TS Information technology — Sys- 1 delayed publication of language version 25025 tems and software Quality 2 corrected version Requirements and Evaluation 3 multilingual document (SQuaRE) — Measurement of IT service quality ISO/IEC FDIS Software and systems engineer- Price 26580 ing — Methods and tools for group the feature-based approach to 2021-03-19 software and systems product IIW International Institute of line engineering Welding ISO/IEC Systems and software engineer- 29110-4-2 ing — Lifecycle profiles for Very ISO en Non‐destructive testing of welds — Small Entities (VSEs) — Part 4-2: 23864:2021 fr Ultrasonic testing — Use of auto- Software engineering: Profile mated total focusing technique (TFM) E specifications: Organizational and related technologies management profile group ISO en Non-destructive testing — Ultrasonic ISO/IEC Information technology — Secu- 23865:2021 fr testing — General use of full matrix 10116:2017/ rity techniques — Modes of op- capture/total focusing technique F Amd 1:2021 eration for an n-bit block cipher (FMC/TFM) and related technologies — Amendment 1: CTR-ACPKM TC 6 Paper, board and pulps mode of operation ISO/TS en Paper and board — Measurement ISO/IEC Information technology — Se- 14778:2021 of water contact angle by optical 10118-1:2016/ curity techniques — Hash- methods B Amd 1:2021 functions — Part 1: General — Amendment 1: Padding methods for sponge functions TC 8 Ships and marine technology ISO/IEC Information technology — Se- ISO en Ships and marine technology — Low- 18033-5:2015/ curity techniques — Encryption 15370:2021 location lighting (LLL) on passenger Amd 1:2021 algorithms — Part 5: Identity- ships — Arrangement E based ciphers — Amendment 1: SM9 mechanism ISO en Marine environment sensor perfor- ISO/IEC Information security — Redac- 22013:2021 mance — Specifications, testing and 23264-1 tion of authentic data — Part 1: reporting — General requirements F General ISO/IEC TS Requirements for bodies provid- TC 20 Aircraft and space vehicles 27006-2:2021 ing audit and certification of in- ISO 7961:2021 en Aerospace — Bolts — Test methods formation security management systems — Part 2: Privacy infor- C mation management systems ISO/IEC TS Information technology — Guid- ISO en Space systems — Test procedure 27022 ance on information security 11227:2012/ to evaluate spacecraft material management system processes Amd 1:2021 ejecta upon hypervelocity impact — XZ ISO/IEC FDIS Information technology — Amendment 1: Oblique impacts and 27050-4 Electronic discovery — Part 4: Annex C update Technical readiness 2021-03-24 TC 22 Road vehicles

ISO en Road vehicles — Connections for ISO/IEC Information technology — Ple- 8092-5:2021 on-board electrical wiring harnesses 21794-2 noptic image coding system — Part 5: Test methods and general B (JPEG Pleno) — Part 2: Light 2021-03-01 performance requirements for wiring field coding harness connector operation ISO/IEC TS Information technology — Speci- ISO fr Electrically propelled road vehicles 23078-3 fication of DRM technology for 19363:2020 — Magnetic field wireless power digital publications — Part 3: transfer — Safety and interoperability F Device key-based protection requirements ISO/IEC TR Artificial Intelligence (AI) — As- ISO en Electrically propelled road vehicles — 24029-1:2021 sessment of the robustness 21498-1:2021 Electrical specifications and tests for of neural networks — Part 1: voltage class B systems and compo- B Overview nents — Part 1: Voltage sub-classes and characteristics

14 ISO Update, Supplement to ISO Focus -- March 2021 ISO en Road vehicles — Fully automatic ISO en Paints and varnishes — Methods of 13044-2:2021 coupling systems 24 V (FACS) for 16474-3:2021 fr exposure to laboratory light sources heavy commercial vehicle combina- E — Part 3: Fluorescent UV lamps C tions — Part 2: Electrical and pneu- matic interface for 50 mm fifth wheel ISO fr Paints and varnishes — Practi- couplings 22516:2019 cal determination of non-volatile ISO 15501- en Road vehicles — Compressed natu- and volatile matter content during B 1:2016/Amd ral gas (CNG) fuel systems — Part 1: application 1:2021 Safety requirements — Amendment 1 XZ ISO fr Paints and varnishes — Friction-

15741:2016 reduction coatings for the interior of ISO 19723- en Road vehicles — Liquefied natural on- and offshore steel pipelines for D 1:2018/Amd gas (LNG) fuel systems — Part 1: non-corrosive gases 1:2021 Safety requirements — Amendment 1 XZ TC 37 Language and terminology

ISO en Language resource management — TC 23 Tractors and machinery for 24613-4:2021 fr (LMF) — agriculture and forestry Part 4: TEI serialization D ISO en Agricultural vehicles — Standardized 22172-2:2021 fr access to repair and maintenance TC 38 Textiles information (RMI) — Part 2: Vehicle C on-board diagnostics ISO en Nonwovens — Test methods — Part 9073-4:2021 fr 4: Determination of tear resistance by ISO en Forestry and gardening machinery the trapezoid procedure A 22868:2021 fr — Noise test code for portable hand- held machines with internal combus- F tion engine — Engineering method ISO 1973:2021 en Textile fibres — Determination of (Grade 2 accuracy) fr linear density — Gravimetric method and vibroscope method B TC 28 Petroleum and related prod- ucts, fuels and lubricants from ISO en Textiles — Unevenness of textile natural or synthetic sources 16549:2021 strands — Capacitance method ISO 4259- fr Petroleum and related products — B 1:2017/Amd Precision of measurement methods 2:2020 and results — Part 1: Determination XZ TC 42 Photography of precision data in relation to meth- ods of test — Amendment 2 ISO/TR en Graphic technology and photography 17321-5:2021 — Colour characterization of digital ISO en Bunkering of marine fuel using the still cameras (DSCs) — Part 5: Colour E 22192:2021 Coriolis mass flow meter (MFM) targets including saturated colours system F for colour characteristic evaluation

test for colorimetric image capture TC 30 Measurement of fluid flow in TC 43 Acoustics closed conduits ISO/TS en Acoustics — Measurement of the ISO 3966:2020 fr Measurement of fluid flow in closed 11819-3:2021 fr influence of road surfaces on traffic conduits — Velocity area method us- noise — Part 3: Reference tyres C ing Pitot static tubes G

TC 44 Welding and allied processes TC 31 Tyres, rims and valves ISO en Resistance welding — Spot welding ISO en Truck and bus tyres and rims (metric 18595:2021 fr of aluminium and aluminium alloys — 4209-2:2020 fr series) — Part 2: Rims Weldability, welding and testing C B

ISO en Mechanical joining of sheet materi- TC 34 Food products 23598:2021 fr als — Destructive testing of joints — ISO en Ground cassava leaves (Isombe) Specimen dimensions and procedure C 24081:2021 — Specification for mechanized peel testing of single A joints ISO en Electron and laser-beam welded ISO 7970:2021 en Wheat (Triticum aestivum L.) 13919-2:2021 fr joints — Requirements and recom- fr — Specification mendations on quality levels for C D imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper ISO 939:2021 en Spices and condiments — Determi- nation of moisture content TC 45 Rubber and rubber products A ISO 2928:2021 en Rubber hoses and hose assemblies

for liquefied petroleum gas (LPG) ISO en Microbiology of the food chain — in the liquid or gaseous phase and B 16140-3:2021 fr Method validation — Part 3: Protocol natural gas up to 2,5 MPa (25 bar) for the verification of reference G — Specification methods and validated alternative ISO 3861:2021 en Rubber hoses and hose assem- methods in a single laboratory fr blies for sand and grit blasting TC 35 Paints and varnishes — Specification B

TC 58 Gas cylinders

ISO Update, Supplement to ISO Focus -- March 2021 15 ISO fr Gas cylinders — Cylinder bundles — ISO en Nuclear criticality safety — Nu- 20475:2018 Periodic inspection and testing 23133:2021 fr clear criticality safety training for B operations B

ISO fr Gas cylinders — Periodic inspection TC 86 Refrigeration and 23088:2020 and testing of welded steel pressure air-conditioning drums — Capacities up to 1 000 l D ISO 5149- en Refrigerating systems and heat 1:2014/Amd fr pumps — Safety and environmental TC 61 Plastics 2:2021 requirements — Part 1: Definitions, XZ ISO en Plastics — Thermogravimetry (TG) of classification and selection criteria 11358-2:2021 polymers — Part 2: Determination of — Amendment 2: Update of Annex A activation energy A and the refrigerant tables TC 87 Cork ISO en Plastics — Thermogravimetry (TG) ISO en Cork bark selected as bottling prod- 11358-3:2021 of polymers — Part 3: Determination 22308-1:2021 fr uct — Part 1: Sensory evaluation — of the activation energy using the C Methodology for sensory evaluation B Ozawa-Friedman plot and analysis of by soaking the reaction kinetics TC 92 Fire safety ISO en Plastics — Ultra-high-molecular- 21304-2:2021 fr weight polyethylene (PE-UHMW) ISO en Reaction-to-fire tests — Heat release, moulding and extrusion materials — D 5660-1:2015 fr smoke production and mass loss Part 2: Preparation of test specimens rate — Part 1: Heat release rate (cone G and determination of properties calorimeter method) and smoke pro- duction rate (dynamic measurement) ISO en Plastics — Polypropylene (PP) — 24076:2021 Determination of isotactic index by ISO/TR en Guidance for assessing the validity low-resolution nuclear magnetic B 16312-2:2021 of physical fire models for obtain- resonance spectrometry ing fire effluent toxicity data for fire F hazard and risk assessment — Part ISO en Carbon-fibre-reinforced compos- 2: Evaluation of individual physical 22821:2021 ites — Determination of fibre weight fire models content by thermogravimetry (TG) B TC 94 Personal safety -- Personal protective equipment ISO en Composites and reinforcements 22841:2021 fibres — Carbon fibre reinforced ISO en Wildland firefighting personal protec- plastics(CFRPs) and metal assem- B 16073-6:2021 tive equipment — Requirements and blies — Determination of the tensile test methods — Part 6: Footwear D lap-shear strength TC 67 Materials, equipment and off- ISO en Respiratory protective devices — shore structures for petroleum, 17420-1:2021 fr Performance requirements — Part 1: petrochemical and natural gas General B

industries ISO en Respiratory protective devices — ISO fr Petroleum and natural gas indus- 17420-2:2021 fr Performance requirements — Part 2: 15156-1:2020 tries — Materials for use in H2S- Requirements for filtering RPD G containing environments in oil and B

gas production — Part 1: General principles for selection of cracking- ISO en Respiratory protective devices — resistant materials 17420-4:2021 fr Performance requirements — Part 4: Requirements for supplied breathable G TC 71 Concrete, reinforced concrete gas RPD and pre-stressed concrete TC 98 Bases for design of structures ISO en Life cycle management of concrete 22040:2021 structures ISO 8930:2021 en General principles on reliability for B structures — Vocabulary A

TC 79 Light metals and their alloys TC 106 Dentistry ISO en Wrought magnesium and magnesium 23694:2021 alloys — Extruded rods/bars and ISO en Dentistry — Casting and baseplate tubes C 15854:2021 waxes D

TC 85 Nuclear energy, nuclear technologies, and radiological TC 108 Mechanical vibration, shock protection and condition monitoring ISO en Monitoring radioactive gases in ISO 5348:2021 en Mechanical vibration and shock 16640:2021 fr effluents from facilities producing — Mechanical mounting of positron emitting radionuclides and G accelerometers D radiopharmaceuticals ISO en Measurement of radioactivity in the TC 113 Hydrometry 20043-1:2021 environment — Guidelines for effec- ISO 3455:2021 en Hydrometry — Calibration of current- tive dose assessment using envi- E meters in straight open tanks ronmental monitoring data — Part C 1: Planned and existing exposure situation TC 120 Leather

16 ISO Update, Supplement to ISO Focus -- March 2021 ISO en Leather — Guidelines for packaging ISO en Biological evaluation of medical de- 11410:2021 of wet blue leather 10993-23:2021 fr vices — Part 23: Tests for irritation A G

TC 131 Fluid power systems TC 198 Sterilization of health care ISO 4406:2021 en Hydraulic fluid power — Fluids products — Method for coding the level of ISO/TS en Sterilization of health care products contamination by solid particles A 22421:2021 — Common requirements for steriliz- ers for terminal sterilization of medi- F TC 142 Cleaning equipment for air and cal devices in health care facilities other gases TC 199 Safety of machinery ISO en Sampling and test method for clean- ISO/TR en Safety of machinery — Relationship 22031:2021 able filter media taken from filters of 22100-1:2021 with ISO 12100 — Part 1: How ISO systems in operation D 12100 relates to type-B and type-C C standards TC 147 Water quality ISO/TR en Safety of machinery — Relationship 22100-5:2021 with ISO 12100 — Part 5: Implica- ISO en Water quality — Determination of cy- tions of artificial intelligence machine A 20596-2:2021 clic volatile methylsiloxanes in water learning — Part 2: Method using liquid-liquid C extraction with gas chromatography- TC 204 Intelligent transport systems mass spectrometry (GC-MS) ISO/TR en Cooperative intelligent transport TC 150 Implants for surgery 21186-1:2021 systems (C-ITS) — Guidelines on the usage of standards — Part 1: Stand- D ISO en Cardiovascular implants — Cardiac ardization landscape and releases 5840-1:2021 fr valve prostheses — Part 1: General requirements G ISO/TR en Cooperative intelligent transport 21186-2:2021 systems (C-ITS) — Guidelines on the usage of standards — Part 2: Hybrid E ISO en Cardiovascular implants — Cardiac communications 5840-2:2021 fr valve prostheses — Part 2: Surgically implanted heart valve substitutes G ISO en Public transport — Interoperable 24014-1:2021 fare management system — Part 1: Architecture H ISO en Cardiovascular implants — Cardiac

5840-3:2021 fr valve prostheses — Part 3: Heart valve substitutes implanted by tran- G TC 206 Fine ceramics scatheter techniques ISO en Fine ceramics (advanced ceramics, TC 153 Valves 19587:2021 advanced technical ceramics) — Mechanical properties of ceramic C ISO 6002:2021 en Industrial valves — Bolted bonnet composites at elevated temperature steel gate valves in air atmospheric pressure — Deter- C mination of in-plane shear strength

TC 215 Health informatics TC 155 Nickel and nickel alloys ISO en Health informatics — Automatic iden- ISO fr Nickel alloys — Determination of tita- 18530:2021 fr tification and data capture marking 11433:2020 nium content — Diantipyrylmethane and labelling — Subject of care and G molecular absorption method B individual provider identification

ISO/TS en Health Informatics - Methodology for TC 156 Corrosion of metals and alloys 22272:2021 analysis of business and information ISO 8407:2021 en Corrosion of metals and alloys — needs of health enterprises to sup- G fr Removal of corrosion products from port standards based architectures corrosion test specimens B TC 221 Geosynthetics

ISO fr Geotextiles and geotextile-related TC 159 Ergonomics 12958-2:2020 products — Determination of water ISO/TR en Ergonomics data for use in the ap- flow capacity in their plane — Part 2: C 22411:2021 plication of ISO/IEC Guide 71:2014 Performance test H TC 229 Nanotechnologies

ISO/TS en Nanotechnologies — Nanostructured TC 178 Lifts, escalators and moving 23362:2021 porous alumina as catalyst support walks for vehicle exhaust emission control B ISO en Electrical requirements for lifts, — Specification of characteristics 8102-2:2021 escalators and moving walks — Part and measurement methods 2: Electromagnetic compatibility with C ISO/TS en Nanotechnologies — Assessment of regard to immunity 23459:2021 protein secondary structure during an TC 194 Biological and clinical evalua- interaction with nanomaterials using D tion of medical devices ultraviolet circular dichroism ISO en Biological evaluation of medical de- TC 249 Traditional Chinese medicine 10993-12:2021 fr vices — Part 12: Sample preparation ISO en Traditional Chinese medicine — and reference materials D 19609-1:2021 Quality and safety of raw materials and finished products made with D raw materials — Part 1: General requirements

ISO Update, Supplement to ISO Focus -- March 2021 17 ISO en Traditional Chinese medicine — Qual- ISO/IEC en Information technology — Digitally 19609-2:2021 ity and safety of raw materials and 30191:2021 recorded media for information inter- finished products made with raw C change and storage — 120 mm Triple H materials — Part 2: Identity testing of Layer (100,0 Gbytes single sided disk constituents of herbal origin and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes TC 258 Project, programme and port- single sided disk) BD Recordable folio management disk ISO fr Project, programme and portfolio ISO/IEC en Information technology — Digi- 21502:2020 management — Guidance on project 30192:2021 tally recorded media for information management G interchange and storage — 120 mm H Single Layer (25,0 Gbytes per disk) TC 261 Additive manufacturing and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk ISO/ASTM en Additive manufacturing — Gen- 52950:2021 fr eral principles — Overview of data ISO/IEC fr Information technology — Security processing B 27017:2015 techniques — Code of practice for information security controls based E on ISO/IEC 27002 for cloud services TC 274 Light and lighting ISO/IEC TS en Privacy protection — Privacy guide- ISO/TS fr Light and lighting — Commissioning 27570:2021 lines for smart cities 21274:2020 of lighting systems in buildings F C

ISO/IEC en Information technology — Office TC 276 Biotechnology 17991:2021 equipment — Method for measuring ISO en Biotechnology — Massively parallel scanning productivity of digital scan- E 20397-2:2021 fr sequencing — Part 2: Quality evalua- ning devices tion of sequencing data D ISO/IEC en Information technology — Of- 24711:2021 fice equipment — Method for the TC 281 Fine bubble technology determination of ink cartridge yield E for colour inkjet printers and multi- ISO en Fine bubble technology — General function devices that contain printer 20480-4:2021 principles for usage and measure- components ment of fine bubbles — Part 4: Termi- A nology related to microbubble beds ISO/IEC en Information technology — Coding 14496-32:2021 of audio-visual objects — Part 32: TC 292 Security and resilience File format reference software and D ISO en Security and resilience — Protective conformance 22341:2021 security — Guidelines for crime pre- ISO/IEC en Information technology — MPEG vention through environmental design D 23002-7:2021 video technologies — Part 7: Ver- satile supplemental enhancement H TC 299 Robotics information messages for coded video bitstreams ISO en Robotics — Modularity for service ro- 22166-1:2021 bots — Part 1: General requirements G

TC 300 Solid recovered materials, in- cluding solid recovered fuels ISO en Solid recovered fuels — Methods for 21644:2021 fr the determination of biomass content F Standards confirmed JTC 1 Information technology ISO/IEC/IEEE en Systems and software engineer- The following International Standards are confimred for a five year 16085:2021 ing — Life cycle processes — Risk period: management F

ISO/IEC en Information technology — Digi- TC 6 Paper, board and pulps 29121:2021 tally recorded media for information ISO 3783:2006 (reconfirmed) interchange and storage — Data D ISO 5635:1978 (reconfirmed) migration method for optical disks for long-term data storage ISO 5637:1989 (reconfirmed) ISO/IEC en Information technology — Digi- ISO 5638:1978 (reconfirmed) 30190:2021 tally recorded media for information ISO 8226-1:1994 (reconfirmed) interchange and storage — 120 mm H Single Layer (25,0 Gbytes per disk) ISO (reconfirmed) and Dual Layer (50,0 Gbytes per disk) 12625-12:2010 BD Recordable disk ISO 14968:1999 (reconfirmed) ISO 15359:1999 (reconfirmed) ISO 15755:1999 (reconfirmed) TC 8 Ships and marine technology ISO 3715-1:2002 (reconfirmed)

18 ISO Update, Supplement to ISO Focus -- March 2021 ISO 6042:2015 ISO 3408-1:2006 (reconfirmed) ISO 7461:1984 (reconfirmed) ISO 3408-4:2006 (reconfirmed) ISO 9203-1:1989 (reconfirmed) ISO 3408-5:2006 (reconfirmed) ISO 9203-2:1989 (reconfirmed) ISO 3590:1976 (reconfirmed) ISO 9203-3:1989 (reconfirmed) ISO 3610:1976 (reconfirmed) ISO 17939:2015 ISO 6898:1984 (reconfirmed) ISO 17940:2015 ISO 6899:1984 (reconfirmed) TC 17 Steel TC 43 Acoustics ISO 6934-1:1991 (reconfirmed) ISO 389-4:1994 (reconfirmed) ISO 6934-2:1991 (reconfirmed) ISO 389-6:2007 (reconfirmed) ISO 6934-3:1991 (reconfirmed) ISO 8253-1:2010 (reconfirmed) ISO 6934-5:1991 (reconfirmed) TC 45 Rubber and rubber products ISO 11082:1992 (reconfirmed) ISO 289-3:2015 ISO 14657:2005 (reconfirmed) ISO/TS 289-4:2017 ISO 16020:2005 (reconfirmed) ISO 15672:2000 (reconfirmed) ISO/TS 7705:2017 TC 51 Pallets for unit load method of materi- TC 20 Aircraft and space vehicles als handling ISO 15387:2005 (reconfirmed) ISO/TS (reconfirmed) 8611-4:2013 TC 22 Road vehicles ISO 18334:2010 (reconfirmed) ISO 6469-4:2015 TC 67 Materials, equipment and offshore TC 23 Tractors and machinery for agriculture structures for petroleum, petrochemi- and forestry cal and natural gas industries ISO 500-2:2004 (reconfirmed) ISO 10441:2007 (reconfirmed) ISO 2332:2009 (reconfirmed) ISO 16903:2015 ISO 11001-3:2009 (reconfirmed) TC 71 Concrete, reinforced concrete and pre- ISO 17612:2004 (reconfirmed) stressed concrete ISO 17900:2002 (reconfirmed) ISO 28841:2013 ISO TC 76 Transfusion, infusion and injection, and 11783-10:2015 blood processing equipment for medi- TC 33 Refractories cal and pharmaceutical use ISO 8894-1:2010 (reconfirmed) ISO 8536-8:2015 ISO 21587-1:2007 (reconfirmed) ISO 8536-9:2015 ISO 21587-2:2007 (reconfirmed) ISO 8536-10:2015 ISO 21587-3:2007 (reconfirmed) ISO 8536-11:2015 TC 34 Food products TC 84 Devices for administration of medicinal ISO 15214:1998 (reconfirmed) products and catheters ISO 11701:2009 (reconfirmed) ISO 14972:1998 (reconfirmed) ISO 17780:2015 TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO 18363-1:2015 ISO 17099:2014 ISO/TS (reconfirmed) 23647:2010 ISO 20553:2006 (reconfirmed) TC 35 Paints and varnishes TC 96 Cranes ISO 1513:2010 (reconfirmed) ISO 10245-4:2004 (reconfirmed) ISO 1520:2006 (reconfirmed) TC 102 Iron ore and direct reduced iron TC 38 Textiles ISO 3271:2015 ISO 1805:2006 (reconfirmed) ISO 4696-1:2015 ISO 6939:1988 (reconfirmed) ISO 4696-2:2015 ISO 6989:1981 (reconfirmed) ISO 4700:2015 ISO 17608:2015 ISO 11256:2015 ISO 18067:2015 ISO 11258:2015 ISO 18596:2015 ISO 13930:2015 ISO 23733:2007 (reconfirmed) TC 104 Freight containers TC 39 Machine tools ISO 9711-1:1990 (reconfirmed) ISO 447:1984 (reconfirmed) TC 119 Powder metallurgy ISO 2562:1973 (reconfirmed) ISO 3995:1985 (reconfirmed) ISO 2912:1973 (reconfirmed) TC 120 Leather

ISO Update, Supplement to ISO Focus -- March 2021 19 ISO 5431:2013 (reconfirmed) ISO/IEC (reconfirmed) 15417:2007 ISO 5432:2013 (reconfirmed) ISO/IEC ISO 5433:2013 (reconfirmed) 15438:2015 TC 131 Fluid power systems ISO/IEC ISO 27407:2010 (reconfirmed) 16480:2015 ISO 10771-1:2015 ISO/IEC TC 135 Non-destructive testing 18004:2015 ISO/IEC ISO 18249:2015 24769-61:2015 TC 138 Plastics pipes, fittings and valves for ISO/IEC the transport of fluids 24769-62:2015 ISO 13229:2010 (reconfirmed) ISO/IEC ISO 13254:2010 (reconfirmed) 24770-61:2015 ISO 13255:2010 (reconfirmed) ISO/IEC 29167-12:2015 ISO 13260:2010 (reconfirmed) ISO/IEC ISO 13262:2010 (reconfirmed) 29167-13:2015 ISO 13263:2010 (reconfirmed) ISO/IEC ISO 13264:2010 (reconfirmed) 29167-17:2015 ISO/TS (reconfirmed) ISO/IEC (reconfirmed) 10465-1:2007 9995-3:2010 ISO/TS ISO/IEC (reconfirmed) 12512:2017 9995-7:2009 TC 159 Ergonomics ISO/IEC 9995-10:2013 ISO 15534-1:2000 (reconfirmed) ISO/IEC ISO 15534-2:2000 (reconfirmed) 9995-11:2015 ISO 15534-3:2000 (reconfirmed) ISO/IEC TS (reconfirmed) TC 165 Timber structures 20071-21:2015 ISO 16598:2015 ISO/IEC ISO 22389-1:2010 (reconfirmed) 20071-23:2018 TC 173 Assistive products ISO/IEC TS (reconfirmed) 20071-25:2017 ISO 10865-2:2015 ISO 16840-6:2015 TC 190 Soil quality ISO 16558-1:2015 TC 197 Hydrogen technologies ISO 16110-2:2010 (reconfirmed) Standards withdrawn ISO 26142:2010 (reconfirmed) TC 204 Intelligent transport systems ISO/TS Period from 01 January to 01 February 2021 17444-1:2017 ISO/TS TC 22 Road vehicles 17444-2:2017 ISO/TR (replaced by ) TC 219 Floor coverings 11955:2008 ISO 6356:2012 ISO/PAS (replaced by ISO 21498-1:2021) TC 221 Geosynthetics 19295:2016 ISO 12957-2:2005 (reconfirmed) TC 39 Machine tools ISO 13426-2:2005 (reconfirmed) ISO 7006:1981 (replaced by ) ISO 13428:2005 (reconfirmed) ISO 9267:1988 (replaced by ) TC 266 Biomimetics TC 61 Plastics ISO 18458:2015 ISO 11542-2:1998 (replaced by ISO 21304-2:2021) ISO 18459:2015 TC 87 Cork TC 301 Energy management and energy ISO 22308:2005 (replaced by ISO 22308-1:2021) savings TC 178 Lifts, escalators and moving walks ISO/IEC ISO 22200:2009 (replaced by ISO 8102-2:2021) 13273-1:2015 TC 215 Health informatics ISO/IEC 13273-2:2015 ISO/TS (replaced by ISO 18530:2021) 18530:2014 JTC 1 Information technology TC 261 Additive manufacturing

20 ISO Update, Supplement to ISO Focus -- March 2021 ISO 17296-4:2014 (replaced by ISO/ASTM 52950:2021) TMBG Technical Management Board - groups IWA 12:2013 (replaced by ) JTC 1 Information technology ISO/IEC TR (replaced by ) 20000-12:2016

Meeting calendar

The meeting calendar is available at https://www.iso.org/meeting-calendar.html

ISO Update, Supplement to ISO Focus -- March 2021 21