ISO Update Supplement to ISOfocus February 2021 International Standards in process TC 34 Food products ISO/CD 24583 Quantitative nuclear magnetic resonance spec- An International Standard is the result of an agreement between troscopy — Purity determination of organic the member bodies of ISO. A first important step towards an Interna- compounds used for foods and food products tional Standard takes the form of a committee draft (CD) - this is cir- — General requirements culated for study within an ISO technical committee. When consensus ISO/CD 27971 Cereals and cereal products — Common has been reached within the technical committee, the document is wheat (Triticum aestivum L.) — Determination sent to the Central Secretariat for processing as a draft International of alveograph properties of dough at constant Standard (DIS). The DIS requires approval by at least 75 % of the hydration from commercial or test flours and member bodies casting a vote. A confirmation vote is subsequently test milling methodology carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD Horizontal methods for molecular biomarker 16577.2 analysis — Terminology for molecular bio- marker analytical methods in agriculture and food production ISO/CD Molecular biomarker analysis — isothermal 22942-1.2 polymerase chain reaction (isoPCR) methods — Part 1: General requirements TC 35 Paints and varnishes ISO/CD 8504-4 Preparation of steel substrates before applica- CD registered tion of paints and related products — Surface preparation methods — Part 4: Acid pickling TC 37 Language and terminology Period from 01 January to 01 February 2021 ISO/CD Management of terminology resources — Data These documents are currently under consideration in the technical 12620-1 categories — Part 1: Specifications committee. ISO/DTS Management of terminology resources — Rep- They have been registred at the Central Secretariat. 24634 resentation of concept relations and subject fields in TBX TC 6 Paper, board and pulps ISO/CD Management of terminology resources — Ter- ISO/CD 5263-3 Pulps — Laboratory wet disintegration — Part 26162-3 minology databases — Part 3: Content 3: Disintegration of mechanical pulps at > 85 TC 38 Textiles degrees C ISO/CD 4333 Textiles — Determination of reduction activity ISO/CD 3037 Corrugated fibreboard — Determination of of specific proteins derived from pollen and edgewise crush resistance (non-waxed edge mite and other sources on textile products method) ISO/CD Textiles — Determination of formaldehyde TC 20 Aircraft and space vehicles 14184-3 — Part 3: Free and hydrolysed formaldehyde ISO/CD 8177 Aerospace — Omega clamps (saddle clamps) (water extraction method) — Determination by for fluid systems — Dimensions liquid chromatography ISO/CD 24330 Space systems — Rendezvous and Proximity TC 39 Machine tools Operations (RPO) and On Orbit Servicing (OOS) ISO/CD Test conditions for machining centres — Part — Programmatic principles and practices 10791-2.2 2: Geometric tests for machines with vertical TC 22 Road vehicles spindle (vertical Z-axis) ISO/CD 24089 Road vehicles — Software update engineering TC 42 Photography ISO/CD 24195 Road vehicles — Vocabulary for engineering of ISO/DIS 14548 Photography — Dimensions of glass plates starting devices TC 44 Welding and allied processes ISO/CD 34501 Road vehicles — Terms and definitions of test ISO/CD 11745 Brazing for aerospace applications — Qualifi- scenarios for automated driving systems cation test for brazers and brazing operators ISO/CD 34502 Road vehicles — Engineering framework and — Brazing of metallic components process of scenario-based safety evaluation TC 45 Rubber and rubber products TC 23 Tractors and machinery for agriculture ISO/CD 2322 Styrene-butadiene rubber (SBR) — Emulsion- and forestry and solution-polymerized types — Evaluation ISO/CD 5674 Tractors and machinery for agriculture and procedures forestry — Guards for power take-off (PTO) TC 48 Laboratory equipment drive-shafts — Strength and wear tests and ac- ISO/CD 5215 Laboratory plastic ware — Volumetric flasks ceptance criteria ISO/CD 3991 Agricultural machinery — Robotic feed sys- TC 54 Essential oils tems — Safety ISO/CD 3520 Essential oil of bergamot [Citrus bergamia ISO/CD Agricultural machinery — Safety — Part 19: Risso & Poit], Calabrian type 4254-19 Feed mixing machines TC 59 Buildings and civil engineering works TC 24 Particle characterization including ISO/CD Building information modelling — Information sieving 29481-3 delivery manual — Part 3: Data schema and classification ISO/CD 26824 Particle characterization of particulate systems — Vocabulary TC 61 Plastics ISO Update, Supplement to ISO Focus -- March 2021 1 ISO/CD 6603-2 Plastics — Determination of puncture impact ISO/DTS Document management — Portable Document behaviour of rigid plastics — Part 2: Instru- 24654 Format — Non-Rectangular Links mented impact testing ISO/DTS Document management — Portable Document ISO/CD 4907-1 Plastics — Ion exchange resin — Part 1: Deter- 32001 Format — Extensions to Encryption and Hash mination of exchange capacity of acrylic anion Algorithm Support in ISO 32000-2 (PDF 2.0) exchange resins ISO/DTS Document management — Portable Document ISO/CD 4907-2 Plastics — Ion exchange resin — Part 2: Deter- 32002 Format — Extensions to Digital Signatures in mination of water content for anion exchange ISO 32000-2 (PDF 2.0) resins in hydroxide form TC 172 Optics and photonics ISO/CD 4907-3 Plastics — Ion exchange resin — Part 3: ISO/CD Optics and optical instruments — Field pro- Determination of exchange capacity of anion 17123-6 cedures for testing geodetic and surveying exchange resins in hydroxide form instruments — Part 6: Rotating lasers ISO/CD Plastics — Thermomechanical analysis (TMA) 11359-1 — Part 1: General principles TC 173 Assistive products ISO/DTR Assistive products for tissue integrity when ly- ISO/CD 4504 Plastics-Polyethylene (PE)-Determination of 20342-7 ing down — Part 7: Foam properties, charac- co-monomer content by NMR carbon-13 teristics and performance spectroscopy ISO/CD Wheelchairs — Part 31: Lithium-based battery ISO/CD Plastics — Wood-plastic recycled composites 7176-31 technology 20819-2 (WPRC) — Part 2: Test methods ISO/CD 23930 Fibre-reinforced plastic composites-Full TC 178 Lifts, escalators and moving walks section compressive test for pultruded FRP ISO/DTR Comparison of worldwide escalator and mov- Profiles 14799-1 ing walk safety standards — Part 1: Rule by TC 67 Materials, equipment and offshore rule comparison structures for petroleum, petrochemi- TC 182 Geotechnics cal and natural gas industries ISO/CD 24057 Array measurement of microtremors to esti- ISO/CD Petroleum and natural gas industries — Corro- mate shear wave velocity profile 24139-1 sion resistant alloy clad bends and fittings for TC 184 Automation systems and integration pipeline transportation system — Part 1: Clad bends ISO/CD Industrial automation systems and integration 14649-2 — Physical device control — Data model for TC 79 Light metals and their alloys computerized numerical controllers — Part 2: ISO/CD 4189 Magnesium and magnesium alloys — Deter- General process data mination of sodium — Inductively coupled ISO/CD Industrial automation systems and integration plasma atomic emission spectrometry 14649-3 — Physical device control — Data model for TC 83 Sports and other recreational facilities computerized numerical controllers — Part 3: and equipment Manufacturing features ISO/CD 4980 Risk assessment for sports and other recrea- ISO/CD Industrial automation systems and integration tional facilities and equipment 14649-4 — Physical device control — Data model for computerized numerical controllers — Part 4: TC 85 Nuclear energy, nuclear technologies, Process data for cutting and radiological protection ISO/CD Industrial automation systems and integration ISO/CD Nuclear energy, nuclear technologies, and 14649-5 — Physical device control — Data model for 12749-2 radiological protection — Vocabulary — Part 2: computerized numerical controllers — Part 5: Radiological protection Tools for cutting operations TC 92 Fire safety ISO/DTS Industrial automation systems and integration 10303-4000 — Product data representation and exchange ISO/DTR 5729 Evaluation of physical parameters of filter — Part 4000: Core Model paper substrates for the determination of the ignition propensity of cigarettes ISO/DTR Digital Validation by effective use of simulation 24463 TC 134 Fertilizers, soil conditioners and benefi- cial substances TC 190 Soil quality ISO/CD 8157 Fertilizers, soil conditioners and beneficial ISO/CD 5120 Soil quality — Determination of perchlorate in substances — Vocabulary soil using liquid chromatography-mass spec- trometry (LC-MS) TC 153 Valves TC 193 Natural gas ISO/CD 5640 Industrial valves — Mounting kits for part-turn valve actuator attachment ISO/CD 2611-1 Analysis of natural gas — Biomethane deter- mination of halogenated compounds — Part 1: TC 154 Processes, data elements and docu- HCl and HF content by ion chromatography ments in commerce, industry and ISO/CD 2612 Analysis of natural gas — Biomethane ¬— administration Determination of ammonia content by Tuneable ISO/CD 5054-1 Specification for an Enterprise Canonical Diode Laser Absorption Spectroscopy Model — Part 1: Architecture ISO/CD 2613-1 Analysis of natural gas — Silicon content of TC 163 Thermal performance and energy use biomethane — Part 1: Determination of total in the built environment silicon content by