DOCSLIB.ORG

Fire Standards Brochure

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fire Standards Brochure BSI fire testing and certification A comprehensive guide Fire standards – what BSI can certify and test Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and Specification for small disposable fire BS 336:2010 BS 6165:2002 ancillary equipment extinguishers of the aerosol type Specification for underground fire hydrants Liquid fire-extinguishing media – Part 1: BS 750:2012 and surface box frames and covers PAS 2013-1:2013 Hand-applied units for use on Class F fires (up to 3l or up to 5l cooking media) Fire hydrant systems equipment – Part 1: BS 5041-1:1987 Specification for landing valves for wet risers SANS 1910:2009 Portable refillable fire extinguishers Fire hydrant systems equipment – Part 2: Portable rechargeable fire extinguishers – BS 5041-2:1987 SANS 1567:2014 Specification for landing valves for dry risers CO2 type extinguishers Fire hydrant systems equipment – Part 3: PAS 2013-1 specifies requirements for Liquid BS 5041-3:1975 Specification for inlet breechings for dry riser PAS 2013-1:2013 Fire-Extinguishing Media – Part 1: Hand- inlets +C1:2014 applied units for use on Class F fires Specification for non-percolating layflat (up to 3L or up to 5L cooking media) BS 6391:2009 delivery hoses and hose assemblies for fire Portable fire extinguishers — Classification, AS/NZS 1850:2009 fighting rating and performance testing BS EN 14339:2005 Underground fire hydrants Portable fire extinguishers. Part 1: General AS/NZS 1841.1:2007 requirements Fire-fighting hoses — Non-percolating layflat BS EN 14540:2005 Portable fire extinguishers. Part 2: Specific hoses for fixed systems AS/NZS 1841.2:2007 requirements for water type extinguishers Fire-fighting hoses – Semi-rigid hoses for BS EN 694:2014 fixed systems Portable fire extinguishers. Part 3: Specific AS/NZS 1841.3:2007 requirements for wet chemical type BS EN 14384:2005 Pillar fire hydrant extinguishers Portable fire extinguishers. Part 4: Specific BS EN 15182-2:2007 Hand-held branchpipes for fire service use – AS/NZS 1841.4:2007 requirements for foam type extinguishers +A1:2009 Part 2: Combination branchpipes PN 16 Portable fire extinguishers. Part 5: Specific Hand-held branchpipes for fire service use AS/NZS 1841.5:2007 BS EN 15182-3:2007 requirements for powder type extinguishers – Part 3: Smooth bore jet and/or one fixed +A1:2009 spray jet angle branchpipes PN 16 Portable fire extinguishers. Part 6: Specific AS/NZS 1841.6:2007 requirements for carbon dioxide type BS EN 15182-4:2007 Hand-held branchpipes for fire service use – extinguishers +A1:2009 Part 4: High pressure branchpipes PN40 Portable fire extinguishers. Part 7: Specific Portable equipment for projecting AS/NZS 1841.7:2007 requirements for vaporising liquid type extinguishing agents supplied by fire extinguishers BS EN 15767-2:2009 fighting pumps — Portable monitors. Part 1: General requirements for portable monitor Portable fire extinguishers. Part 8: Specific assemblies AS/NZS 1841.8:2007 requirements for non-rechargeable type extinguishers Portable equipment for projecting extinguish- BS EN 15767-3:2010 ing agents supplied by fire fighting pumps — Portable monitors. Part 3: Foam devices Fire Blankets Fire Extinguishers BS EN 1869:1997 Fire blankets Mobile fire extinguishers — BS EN 1866-1:2007 Part 1: Characteristics, performance and test Hose Reels methods Fixed firefighting systems – Hose systems Mobile fire extinguishers — BS EN 671-1:2012 Part 1: Hose reels with semi-rigid hose Part 2: Requirements for the construction, pressure resistance and mechanical tests Fixed firefighting systems — Hose systems BS EN 1866-2:2014 BS EN 671-2:2012 for extinguishers, with a maximum allowable Part 2: Hose systems with lay-flat hose pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 SANS 543:2015 Fire hose reels (with semi-rigid hose) Mobile fire extinguishers — Part 3: Requirements for the assembly , BS EN 1866-3:2013 construction and pressure resistance of Fire Extinguishing Systems CO2 extinguishers which comply with the requirements of EN 1866-1 Evaluation Guideline for fixed dry aerosol fire BRL-K23001/04 BS EN 3-7:2004 Characteristics, performance requirements extinguishing components +A1:2007 and test methods Fixed fire fighting systems – Gas extinguish- Additional requirements to EN 3-7 for the BS EN 15004-1:2008 ing systems – Part 1: Design, installation and construction, resistance maintenance BS EN 3-8:2006 to pressure and mechanical tests for extinguishers with a maximum allowable Key: BSI Kitemark™ and CE marking available on this standard pressure equal to or lower than 30 bar Additional requirements to EN 3-7 for BSI Kitemark™ available on this standard BS EN 3-9:2006 pressure resistance of CO2 extinguishers CE marking available on this standard Provisions for evaluating the conformity of a BS EN 3-10:2009 portable fire extinguisher to EN 3-7 BSI Benchmark™ available on this standard (Australia and New Zealand only) Fire Detection and Fire Alarm System Fire Extinguishing Media Components/Devices – continued Fire protection. Fire extinguishing media. Fire Detection and Fire Alarm Systems BS EN 615:2009 Specifications for powders (other than class BS EN 54-16:2008 – Part 16. Voice Alarm Control and Indicating D powders) Equipment Fire extinguishing media – Foam concen- Fire Detection and Fire Alarm Systems trates – Part 1: Specification for medium BS EN 54-17:2005 BS EN 1568-1:2018 – Part 17. Short Circuit Isolator Modules expansion foam concentrates for surface Fire Detection and Fire Alarm Systems application to water-immiscible liquids BS EN 54-18:2005 – Part 18. Input / Output Modules Fire extinguishing media – Foam con- centrates – Part 2: Specification for high Fire Detection and Fire Alarm Systems BS EN 1568-2:2018 BS EN 54-20:2006 expansion foam concentrates for surface – Part 20. Aspirating Smoke Detectors application to water-immiscible liquids Fire Detection and Fire Alarm Systems Fire extinguishing media. Foam concentrates BS EN 54-21:2006 – Part 21. Alarm Transmission and Fault - Part 3. Specification for low expansion foam Warning Routing Equipment BS EN 1568-3:2018 concentrates for surface application to water- immiscible liquids Fire detection and fire alarm systems – BS EN 54-23:2010 Part 23. Fire Alarm Devices – Visual Alarm Fire extinguishing media – Foam con- Systems centrates – Part 4: Specification for low BS EN 1568-4:2018 Fire Detection and Fire Alarm Systems – Part expansion foam concentrates for surface BS EN 54-24:2008 application to water-miscible liquids 24. Components of Voice – Loud Speaker Fire Detection and Fire Alarm Systems – Part BS EN 54-25:2008 25. Components using Radio Links Fire Detection and Fire Alarm Devices for Dwellings Fixed Fire Fighting Systems – Components for Gas Extinguishing Systems. Part 1: Fire detection and fire alarm devices for BS EN 12094-1:2003 BS 5446-2:2003 Requirements and Test Methods for Electrical dwellings. Part 2: Specification for heat alarms Automatic Control and Delay Devices Detection and alarm devices for dwellings – Fixed firefighting systems. Components Part 3: Specification for fire alarm and carbon for gas extinguishing systems. Part 3: BS 5446-3:2015 BS EN 12094-3:2003 monoxide alarm systems for deaf and hard of Requirements and test methods for manual hearing people triggering and stop devices Electrical apparatus for continuous operation Fire detection and alarm systems – Control in a fixed installations in recreational vehicles AS 7240-2:2004 BS EN 50291-2:2010 and indicating equipment and similar premises including recreational +A1:2015 craft — Additional test methods and Fire detection and alarm systems – Audible AS 7240-3:2014 performance requirements alarm devices Electrical apparatus for the detection of AS 7240- Fire detection and alarm systems – Power BS EN 50194-1:2009 combustible gases in domestic premises – 4:2004+A1:2016 supply equipment Test methods and performance requirements AS 7240- Fire detection and alarm systems – Point BS EN 14604:2005 Smoke alarm devices 5:2004+A1:2007 type heat detectors Fire detection and alarm systems – Point Smoke alarms using scattered light, AS 3786:2014 AS 7240-7:2004 type smoke detectors using scattered light, transmitted light or ionization transmitted light or ionization Gas detectors. Electrical apparatus for the detection of carbon monoxide in domestic Fire detection and alarm systems – Manual BS EN 50291-1:2018 AS 7240-10:2008 premises. Test methods and performance call points requirements Fire detection and alarm systems – AS 7240- Compatibility assessment of system 13:2006+A1:2006 Fire Detection and Fire Alarm System components Fire detection and alarm systems – Short Components/Devices AS 7240-17:2015 circuit isolators Fire Detection and Fire Alarm Systems Fire detection and alarm systems – Input/ BS EN 54-2:1998 AS 7240-18:2015 – Part 2. Control and Indicating Equipment output devices BS EN 54–3: Fire Detection and Fire Alarm Systems Fire detection and alarm systems – Visual AS 7240-23:2014 2001/2014 – Part 3. Fire Alarm Devices – Sounders alarm devices Fire Detection and Fire Alarm Systems Fire detection and alarm systems – Sound BS EN 54-4:1997 AS 7240-24:2015 – Part 4. Power Supply Equipment system loudspeakers Fire Detection and Fire Alarm Systems BS EN 54-5:2000 Fire detection and alarm systems – Point – Part 5. Heat Detectors – Point Detectors type fire detectors using a scattered light, Fire Detection and Fire Alarm Systems AS 7240-27:2016 transmitted light or ionization smoke sensor, BS EN 54-7:2000 – Part 7. Smoke Detectors – Point Detectors an electrochemical cell carbon monoxide using Scattered Light or Ionization sensor and a heat sensor Fire Detection and Fire Alarm Systems – Part BS EN 54-10:2002 10. Flame Detectors and Point Detectors Fire Detection and Fire Alarm Systems BS EN 54–11:2001 – Part 11. Manual Call Points Key: BSI Kitemark™ and CE marking available on this standard Fire Detection and Fire Alarm Systems BS EN 54-12:2002 – Part 12.
Load more

Recommended publications
  • Product Certification
    Product Certification A comprehensive guide to BSI’s product certification services KITEMARK™ Table of contents 1 BSI Overview - NRTL service for the US and Canada in coalition with MET labs 2.15 - RADMAC - EN 442 radiators and convectors 2.16 BSI Overview 1.1 - STB Mark - certification in Belarus 2.16 What is Product Certification? 1.2 - Keymark - EU construction standards 2.16 Why choose BSI for Product Certification? 1.3 - REAS - Electrical Products to Australia & New Zealand Market 2.17 - EFSG - European Fire & Safety Group 2.17 - VCA certification - Vehicle Certification Agency 2.18 2 Product Certification Schemes and Services - NCS International 2.18 BSI Kitemark 2.2 Benchmark 2.4 3 Section 3 – EU directives CE marking 2.5 ATEX Equipment Directive (94/9/EC) | (99/92.EC) 3.1 Verification Certificate 2.7 Boiler Efficiency Directive (92/42/EEC) 3.2 Green Deal 2.9 Gas Appliances Directive (GAD - 2009/142/EC ) 3.3 GS Certification (pending) 2.10 Lift Directive (LD 95/16/EC) 3.4 Gap Analysis 2.10 Marine Directive (MED 96/98/EC) 3.5 Other Schemes BSI can offer: 2.11 - IEC Certification Schemes for Electronic Products 2.11 Low Voltage Directive (2006/95/EC) 3.6 - IEC Quality Assessment System for Electrtronic Components 2.12 Non Automatic Weighing Instruments Directive (NAWI) - CCA certification - CENELEC Certification Agreement 2.14 90/384/EEC | 93/68/EEC | SI 2000/323) 3.7 - ENEC mark - applicable for Electro technology 2.14 Personal Protective Equipment Directive (PPE 89/686/EEC) 3.8 >> ii Pressure Equipment Directive (PED 97/23/EC)
    [Show full text]
  • Snapshot of the Current Situation for Standards to Be Cited in the OJ Under the 2015-04-03 Page 1 CPR
    CEN - Construction sector Snapshot of the current situation for Standards to be cited in the OJ under the 2015-04-03 Page 1 CPR 1. Introduction The objective of the CEN Construction Sector Snapshot is to provide standardizers and users of the standards with an overview of: - the draft standards developed by CEN and ECISS Technical Committees, which will be cited in the Official Journal under Regulation 305/2011; - the amendments and revisions of harmonized product standards (hEN) already cited in the OJEU. Priority is given to the 'market' vision of the Standard. Therefore, corrigenda, amendments or revisions are not totalized separately but in a group, which progress is measured according to the global progress for the purpose. The labels used in the different sections of the snapshot can be understood as follows: Generic part of a Standard reference without date or function (for Standard: more details see the 'linked work item' description). Title: English title of the (draft) standard Gives the unique CEN Work Item identification and, if existing, the the Linked Work Item: full Standard reference Gives the last registered (date of the Snapshot) evolution in major Last realized: steps (description and internal milestone numbering) for each Work Item Gives references and dates from the registered history in the Official OJEU: Journal from the European Commission. Date of withdrawal registered in the CEN database. There may be a DOW: difference with the dates cited in the OJEU (last minute change or registration time discrepancies). Gives a list of all mandates linked to the concerned Work Item (also Man: manadates which are not specifically linked to the CPR).
    [Show full text]
  • DNVGL-ST-0145 Offshore Substations
    STANDARD DNVGL-ST-0145 Edition April 2016 Offshore substations The electronic pdf version of this document found through http://www.dnvgl.com is the officially binding version. The documents are available free of charge in PDF format. DNV GL AS FOREWORD DNV GL standards contain requirements, principles and acceptance criteria for objects, personnel, organisations and/or operations. © DNV GL AS April 2016 Any comments may be sent by e-mail to [email protected] This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of this document. CHANGES – CURRENT General This document supersedes DNV-OS-J201, November 2013. Text affected by the main changes in this edition is highlighted in red colour. However, if the changes involve a whole chapter, section or sub-section, normally only the title will be in red colour. On 12 September 2013, DNV and GL merged to form DNV GL Group. On 25 November 2013 Det Norske Veritas AS became the 100% shareholder of Germanischer Lloyd SE, the parent company of the GL Group, and on 27 November 2013 Det Norske Veritas AS, company registration number 945 748 931, changed its name to DNV GL AS. For further information, see www.dnvgl.com. Any reference in this document to “Det Norske Veritas AS”, “Det Norske Veritas”, “DNV”, “GL”, “Germanischer Lloyd SE”, “GL Group” or any other legal entity name or trading name presently owned by the DNV GL Group shall therefore also be considered a reference to “DNV GL AS”.
    [Show full text]
  • Harmoneerituks Tunnistatud Standardid
    Avaldatud 18.09.2018 Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Ilmub alates 1993. aastast SISUKORD UUED STANDARDID JA STANDARDILAADSED DOKUMENDID ......................................... 3 ASENDATUD VÕI TÜHISTATUD EESTI STANDARDID JA STANDARDILAADSED DOKUMENDID ....................................................................................................................... 15 STANDARDIKAVANDITE ARVAMUSKÜSITLUS .................................................................. 23 TÕLKED KOMMENTEERIMISEL .......................................................................................... 46 TÜHISTAMISKÜSITLUS ........................................................................................................ 47 UUED EESTIKEELSED STANDARDID JA STANDARDILAADSED DOKUMENDID ........... 48 STANDARDIPEALKIRJADE MUUTMINE .............................................................................. 50 TAASKEHTESTATUD EESTI STANDARDID ........................................................................ 51 EESTI STANDARDITE TÄHISTE MUUDATUSED ................................................................ 51 UUED STANDARDID JA STANDARDILAADSED DOKUMENDID 01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOON EVS JUHEND 4:2018 Eesti standardi ja standardilaadse dokumendi ülesehitus,
    [Show full text]
  • (EU) No 305/2011 of the European Parliament and Of
    C 209/14 EN Official Journal of the European Union 10.6.2016 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 209/03) The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards. Date of applicability of the Reference and title of the standard Reference of Date of the end of the co- ESO (1) standard as a harmonised (and reference document) superseded standard existence period standard (1) (2) (3) (4) (5) CEN EN 1:1998 1.1.2008 Date expired Flued oil stoves with vaporizing burners (1.1.2009) EN 1:1998/A1:2007 1.1.2008 Date expired (1.1.2009) CEN EN 40-4:2005 1.10.2006 Date expired Lighting columns — Part 4: Requirements for (1.10.2007) reinforced and prestressed concrete lighting columns EN 40-4:2005/AC:2006 1.1.2007 Date expired (1.1.2007) CEN EN 40-5:2002 1.2.2003 Date expired Lighting columns — Part 5: Requirements for (1.2.2005) steel lighting columns CEN EN 40-6:2002 1.2.2003 Date expired Lighting columns — Part 6: Requirements for (1.2.2005) aluminium lighting columns CEN EN 40-7:2002 1.10.2003 Date expired Lighting columns — Part 7: Requirements for (1.10.2004) fibre reinforced polymer composite lighting columns CEN EN 54-2:1997 1.1.2008
    [Show full text]
  • BSI Assurance UK Limited
    Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK BSI Assurance UK Limited Issue No: 218 Issue date: 16 September 2021 Kitemark Court Sales Enquiry Tel: +44 (0)845 080 9000 Davy Avenue Fax: +44 (0)1908 228060 Knowlhill Sales Enquiry Email: [email protected] 0003 Milton Keynes BSI Website: www.bsigroup.com Accredited to MK5 8PP Regulatory Contact: Maria Crane ISO/IEC 17065:2012 to provide product Tel: +44 (0)1908 814724 conformity certification Email: [email protected] Locations where certification activities covered by the above Accreditation Standard are undertaken Kitemark Court Kitemark House Davy Avenue Maylands Avenue Knowlhill Hemel Hempstead Milton Keynes Hertfordshire MK5 8PP HP2 4SQ UNITED KINGDOM UNITED KINGDOM Holywell Park Room 1006-1011,10/F Ashby Road Ciro’s Plaza Loughborough 388 Nanjing W. RD Leicestershire Shanghai 200003 LE11 3AQ PR CHINA UNITED KINGDOM Say Building Suite 208 John M. Keynesplein 9, 4th floor Sultan Business Centre 1066 EP PO Box 49400 Amsterdam Dubai NETHERLANDS UNITED ARAB EMIRATES 210 Amarande Avenue Regus Business Park Menlyn Maine Waterkloof Ext 2 0181 SOUTH AFRICA Flexible Scope This Certification Body is additionally accredited to develop and add additional product standards within the highlighted product areas, having demonstrated competence in their design and development process for these areas. Assessment Manager: WC1 Page 1 of 120 Schedule of Accreditation issued by United Kingdom
    [Show full text]
  • Standards Published in 2011
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 152-2:1988/AC1:1989 Date published 11 APRIL 2011 Test methods for wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Part 2 : Application by methods other than brushing. 2. S.R. CR 1350:1993 Date published 21 SEPTEMBER 2011 Investigation of Syntaxes for Existing Interchange Formats to be Used in Healthcare 3. S.R. CR 1460:1994 Date published 21 SEPTEMBER 2011 Packaging – Energy Recovery from Used Packaging 4. S.R. CR 12161:1995 Date published 24 SEPTEMBER 2011 A method for defining profiles for healthcare 5. S.R. CR 12340:1996 Date published 21 SEPTEMBER 2011 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems 6. S.R. CR 1901:1995 Date published 21 SEPTEMBER 2011 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete 7. S.R. CR 12776:1997 Date published 21 SEPTEMBER 2011 Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials 8. S.R. CR 12793:1997 Date published 21 SEPTEMBER 2011 Measurement of the carbonation depth of hardened concrete 9. S.R. CR 12804:1997 Date published 21 SEPTEMBER 2011 Conceptual Model and Taxonomy for Information Systems Engineering 10. S.R. CR 12894:1997 Date published 21 SEPTEMBER 2011 Biotechnology - Microorganisms - Examination of the various existing lists of animal pathogens and production of a report 11. S.R. CR 13156:1998 Date published 21 SEPTEMBER 2011 Some occupational profiles for practitioners in logistics 12.
    [Show full text]
  • Official Journal of the European Union C 378/1
    Official Journal C 378 of the European Union Volume 58 English edition Information and Notices 13 November 2015 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2015/C 378/01 Commission communication in the framework of the implementation of Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 1 2015/C 378/02 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/ 2011) (1) . 4 2015/C 378/03 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 6 EN (1) Text with EEA relevance 13.11.2015 EN Official Journal of the European Union C 378/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication
    [Show full text]
  • Overview All Kiwa Notifications
    For more information contact [email protected] Overview all CPR notifications within the Kiwa Group 0 0 dd 7-05-2019 Product Technical specification AVCP Productscope Kiwa Area system Notifications 1 0 - PRECAST NORMAL/LIGHTWEIGHT/AUTOCLAVED AERATED CONCRETE PRODUCTS. x 1 EAD 010013-00-0301 Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing 1 EAD 010003-00-0301 Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC) 1 EAD 010001-00-0301 Precast concrete composite wall with point connectors 1 EN 15037-1:2008 2+ Precast concrete products - Beam-and-block floor systems - Beams x 1 EN 15037-3:2009+A1:2011 2+ Precast concrete products - Beam-and-block floor systems - Clay blocks x 1 EN 15037-2:2009+A1:2011 2+ Precast concrete products - Beam-and-block floor systems - Concrete blocks x 1 EN 15037-4:2010+A1:2013 2+ Precast concrete products - Beam-and-block floor systems - Expanded polystyrene blocks x 1 EN 15037-5:2013 2+ Precast concrete products - Beam-and-block floor systems - Lightweight blocks for simple formwork x 1 EN 14844:2006+A2:2011 2+/4 Precast concrete products - Box culverts x 1 EN 15050:2007+A1:2012 2+ Precast concrete products - Bridge elements x 1 EN 12839:2012 4 Precast concrete products - Elements for fences 1 EN 13747:2005+A2:2010 2+ Precast concrete products - Floor plates for floor systems x 1 EN 12737:2004+A1:2007 2+ Precast concrete products - Floor slats for livestock x 1 EN 14991:2007 2+ Precast concrete
    [Show full text]
  • BSI Fire Testing and Certification for Fire Products © BSI Group BSI/USA/536/MS/0516/E Fire Standards – Testing and Certification Service
    BSI fire testing and certification for fire products © BSI Group BSI/USA/536/MS/0516/E Fire standards – testing and certification service. Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and ancillary Provisions for evaluating the conformity of a BS 336:2010 BS EN 3-10:2009 equipment. portable fire extinguisher to EN 3-7. Specification for underground fire hydrants and Specification for small disposable fire BS 750:2012 BS 6165:2002 surface box frames and covers. extinguishers of the aerosol type. Fire hydrant systems equipment – Part 1: Specifi- Liquid fire-extinguishing media – Part 1: Hand- BS 5041-1:1987 cation for landing valves for wet risers. PAS 2013-1:2013 applied units for use on Class F fires (up to 3l or up to 5l cooking media). Fire hydrant systems equipment – Part 2: Specifi- BS 5041-2:1987 cation for landing valves for dry risers. Fire hydrant systems equipment – Part 3: Specifi- BS 5041-3:1975 cation for inlet breechings for dry riser inlets. Fire Blankets Specification for non-percolating layflat delivery BS 6391:2009 BS EN 1869:1997 Fire blankets. hoses and hose assemblies for fire fighting. BS EN 14339:2005 Underground fire hydrants. Fire-fighting hoses — Non-percolating layflat Hose Reels BS EN 14540:2005 hoses for fixed systems. Fixed firefighting systems – Hose systems Fire-fighting hoses – Semi-rigid hoses for fixed BS EN 671-1:2012 BS EN 694:2014 Part 1: Hose reels with semi-rigid hose. systems. Fixed firefighting systems — Hose systems BS EN 671-2:2012 BS EN 14384:2005 Pillar Fire Hydrant.
    [Show full text]
  • Fire Detection & Fire Alarm Systems in Heavy Duty Vehicles
    Fire detection & fire alarm systems in heavy duty vehicles WP1 – Survey of fire detection in vehicles Ola Willstrand, Peter Karlsson, Jonas Brandt SP Technical Research Institute of Sweden Research SP Technical This project was partly funded by FFI SP Fire Research SP Report 2015:68 Fire detection & fire alarm systems in heavy duty vehicles WP1 – Survey of fire detection in vehicles Ola Willstrand, Peter Karlsson, Jonas Brandt 3 Abstract The work presented in this report is part of a larger project about fire detection and fire alarm systems in heavy duty vehicles. The work presented here covers fire detection technologies, standards and guidelines and research in the field. The purpose of this work is mainly to provide background information for the other work packages in the project. An understanding of different types of detection technologies; how the systems function and what their advantages and disadvantages are, is provided. An extensive summary of all relevant standards and guidelines, including those used in adjacent fields like the rail, aviation and marine industry, provides necessary information to the overall goal of defining an international test standard for fire detection in heavy duty vehicles. At last a short overview of past and ongoing research regarding fire detection in vehicles is presented. Key words: fire detection, detector technologies, vehicles, standards, guidelines SP Sveriges Tekniska Forskningsinstitut SP Technical Research Institute of Sweden SP Report 2015:68 ISBN 978-91-88001-96-2 ISSN 0284-5172 Borås
    [Show full text]