BSI fire testing and certification A comprehensive guide Fire standards – what BSI can certify and test Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and Specification for small disposable fire BS 336:2010 BS 6165:2002 ancillary equipment extinguishers of the aerosol type Specification for underground fire hydrants Liquid fire-extinguishing media – Part 1: BS 750:2012 and surface box frames and covers PAS 2013-1:2013 Hand-applied units for use on Class F fires (up to 3l or up to 5l cooking media) Fire hydrant systems equipment – Part 1: BS 5041-1:1987 Specification for landing valves for wet risers SANS 1910:2009 Portable refillable fire extinguishers Fire hydrant systems equipment – Part 2: Portable rechargeable fire extinguishers – BS 5041-2:1987 SANS 1567:2014 Specification for landing valves for dry risers CO2 type extinguishers Fire hydrant systems equipment – Part 3: PAS 2013-1 specifies requirements for Liquid BS 5041-3:1975 Specification for inlet breechings for dry riser PAS 2013-1:2013 Fire-Extinguishing Media – Part 1: Hand- inlets +C1:2014 applied units for use on Class F fires Specification for non-percolating layflat (up to 3L or up to 5L cooking media) BS 6391:2009 delivery hoses and hose assemblies for fire Portable fire extinguishers — Classification, AS/NZS 1850:2009 fighting rating and performance testing BS EN 14339:2005 Underground fire hydrants Portable fire extinguishers. Part 1: General AS/NZS 1841.1:2007 requirements Fire-fighting hoses — Non-percolating layflat BS EN 14540:2005 Portable fire extinguishers. Part 2: Specific hoses for fixed systems AS/NZS 1841.2:2007 requirements for water type extinguishers Fire-fighting hoses – Semi-rigid hoses for BS EN 694:2014 fixed systems Portable fire extinguishers. Part 3: Specific AS/NZS 1841.3:2007 requirements for wet chemical type BS EN 14384:2005 Pillar fire hydrant extinguishers Portable fire extinguishers. Part 4: Specific BS EN 15182-2:2007 Hand-held branchpipes for fire service use – AS/NZS 1841.4:2007 requirements for foam type extinguishers +A1:2009 Part 2: Combination branchpipes PN 16 Portable fire extinguishers. Part 5: Specific Hand-held branchpipes for fire service use AS/NZS 1841.5:2007 BS EN 15182-3:2007 requirements for powder type extinguishers – Part 3: Smooth bore jet and/or one fixed +A1:2009 spray jet angle branchpipes PN 16 Portable fire extinguishers. Part 6: Specific AS/NZS 1841.6:2007 requirements for carbon dioxide type BS EN 15182-4:2007 Hand-held branchpipes for fire service use – extinguishers +A1:2009 Part 4: High pressure branchpipes PN40 Portable fire extinguishers. Part 7: Specific Portable equipment for projecting AS/NZS 1841.7:2007 requirements for vaporising liquid type extinguishing agents supplied by fire extinguishers BS EN 15767-2:2009 fighting pumps — Portable monitors. Part 1: General requirements for portable monitor Portable fire extinguishers. Part 8: Specific assemblies AS/NZS 1841.8:2007 requirements for non-rechargeable type extinguishers Portable equipment for projecting extinguish- BS EN 15767-3:2010 ing agents supplied by fire fighting pumps — Portable monitors. Part 3: Foam devices Fire Blankets Fire Extinguishers BS EN 1869:1997 Fire blankets Mobile fire extinguishers — BS EN 1866-1:2007 Part 1: Characteristics, performance and test Hose Reels methods Fixed firefighting systems – Hose systems Mobile fire extinguishers — BS EN 671-1:2012 Part 1: Hose reels with semi-rigid hose Part 2: Requirements for the construction, pressure resistance and mechanical tests Fixed firefighting systems — Hose systems BS EN 1866-2:2014 BS EN 671-2:2012 for extinguishers, with a maximum allowable Part 2: Hose systems with lay-flat hose pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 SANS 543:2015 Fire hose reels (with semi-rigid hose) Mobile fire extinguishers — Part 3: Requirements for the assembly , BS EN 1866-3:2013 construction and pressure resistance of Fire Extinguishing Systems CO2 extinguishers which comply with the requirements of EN 1866-1 Evaluation Guideline for fixed dry aerosol fire BRL-K23001/04 BS EN 3-7:2004 Characteristics, performance requirements extinguishing components +A1:2007 and test methods Fixed fire fighting systems – Gas extinguish- Additional requirements to EN 3-7 for the BS EN 15004-1:2008 ing systems – Part 1: Design, installation and construction, resistance maintenance BS EN 3-8:2006 to pressure and mechanical tests for extinguishers with a maximum allowable Key: BSI Kitemark™ and CE marking available on this standard pressure equal to or lower than 30 bar Additional requirements to EN 3-7 for BSI Kitemark™ available on this standard BS EN 3-9:2006 pressure resistance of CO2 extinguishers CE marking available on this standard Provisions for evaluating the conformity of a BS EN 3-10:2009 portable fire extinguisher to EN 3-7 BSI Benchmark™ available on this standard (Australia and New Zealand only) Fire Detection and Fire Alarm System Fire Extinguishing Media Components/Devices – continued Fire protection. Fire extinguishing media. Fire Detection and Fire Alarm Systems BS EN 615:2009 Specifications for powders (other than class BS EN 54-16:2008 – Part 16. Voice Alarm Control and Indicating D powders) Equipment Fire extinguishing media – Foam concen- Fire Detection and Fire Alarm Systems trates – Part 1: Specification for medium BS EN 54-17:2005 BS EN 1568-1:2018 – Part 17. Short Circuit Isolator Modules expansion foam concentrates for surface Fire Detection and Fire Alarm Systems application to water-immiscible liquids BS EN 54-18:2005 – Part 18. Input / Output Modules Fire extinguishing media – Foam con- centrates – Part 2: Specification for high Fire Detection and Fire Alarm Systems BS EN 1568-2:2018 BS EN 54-20:2006 expansion foam concentrates for surface – Part 20. Aspirating Smoke Detectors application to water-immiscible liquids Fire Detection and Fire Alarm Systems Fire extinguishing media. Foam concentrates BS EN 54-21:2006 – Part 21. Alarm Transmission and Fault - Part 3. Specification for low expansion foam Warning Routing Equipment BS EN 1568-3:2018 concentrates for surface application to water- immiscible liquids Fire detection and fire alarm systems – BS EN 54-23:2010 Part 23. Fire Alarm Devices – Visual Alarm Fire extinguishing media – Foam con- Systems centrates – Part 4: Specification for low BS EN 1568-4:2018 Fire Detection and Fire Alarm Systems – Part expansion foam concentrates for surface BS EN 54-24:2008 application to water-miscible liquids 24. Components of Voice – Loud Speaker Fire Detection and Fire Alarm Systems – Part BS EN 54-25:2008 25. Components using Radio Links Fire Detection and Fire Alarm Devices for Dwellings Fixed Fire Fighting Systems – Components for Gas Extinguishing Systems. Part 1: Fire detection and fire alarm devices for BS EN 12094-1:2003 BS 5446-2:2003 Requirements and Test Methods for Electrical dwellings. Part 2: Specification for heat alarms Automatic Control and Delay Devices Detection and alarm devices for dwellings – Fixed firefighting systems. Components Part 3: Specification for fire alarm and carbon for gas extinguishing systems. Part 3: BS 5446-3:2015 BS EN 12094-3:2003 monoxide alarm systems for deaf and hard of Requirements and test methods for manual hearing people triggering and stop devices Electrical apparatus for continuous operation Fire detection and alarm systems – Control in a fixed installations in recreational vehicles AS 7240-2:2004 BS EN 50291-2:2010 and indicating equipment and similar premises including recreational +A1:2015 craft — Additional test methods and Fire detection and alarm systems – Audible AS 7240-3:2014 performance requirements alarm devices Electrical apparatus for the detection of AS 7240- Fire detection and alarm systems – Power BS EN 50194-1:2009 combustible gases in domestic premises – 4:2004+A1:2016 supply equipment Test methods and performance requirements AS 7240- Fire detection and alarm systems – Point BS EN 14604:2005 Smoke alarm devices 5:2004+A1:2007 type heat detectors Fire detection and alarm systems – Point Smoke alarms using scattered light, AS 3786:2014 AS 7240-7:2004 type smoke detectors using scattered light, transmitted light or ionization transmitted light or ionization Gas detectors. Electrical apparatus for the detection of carbon monoxide in domestic Fire detection and alarm systems – Manual BS EN 50291-1:2018 AS 7240-10:2008 premises. Test methods and performance call points requirements Fire detection and alarm systems – AS 7240- Compatibility assessment of system 13:2006+A1:2006 Fire Detection and Fire Alarm System components Fire detection and alarm systems – Short Components/Devices AS 7240-17:2015 circuit isolators Fire Detection and Fire Alarm Systems Fire detection and alarm systems – Input/ BS EN 54-2:1998 AS 7240-18:2015 – Part 2. Control and Indicating Equipment output devices BS EN 54–3: Fire Detection and Fire Alarm Systems Fire detection and alarm systems – Visual AS 7240-23:2014 2001/2014 – Part 3. Fire Alarm Devices – Sounders alarm devices Fire Detection and Fire Alarm Systems Fire detection and alarm systems – Sound BS EN 54-4:1997 AS 7240-24:2015 – Part 4. Power Supply Equipment system loudspeakers Fire Detection and Fire Alarm Systems BS EN 54-5:2000 Fire detection and alarm systems – Point – Part 5. Heat Detectors – Point Detectors type fire detectors using a scattered light, Fire Detection and Fire Alarm Systems AS 7240-27:2016 transmitted light or ionization smoke sensor, BS EN 54-7:2000 – Part 7. Smoke Detectors – Point Detectors an electrochemical cell carbon monoxide using Scattered Light or Ionization sensor and a heat sensor Fire Detection and Fire Alarm Systems – Part BS EN 54-10:2002 10. Flame Detectors and Point Detectors Fire Detection and Fire Alarm Systems BS EN 54–11:2001 – Part 11. Manual Call Points Key: BSI Kitemark™ and CE marking available on this standard Fire Detection and Fire Alarm Systems BS EN 54-12:2002 – Part 12.