BSI Fire Testing and Certification for Fire Products © BSI Group BSI/USA/536/MS/0516/E Fire Standards – Testing and Certification Service

Total Page:16

File Type:pdf, Size:1020Kb

BSI Fire Testing and Certification for Fire Products © BSI Group BSI/USA/536/MS/0516/E Fire Standards – Testing and Certification Service BSI fire testing and certification for fire products © BSI Group BSI/USA/536/MS/0516/E Fire standards – testing and certification service. Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and ancillary Provisions for evaluating the conformity of a BS 336:2010 BS EN 3-10:2009 equipment. portable fire extinguisher to EN 3-7. Specification for underground fire hydrants and Specification for small disposable fire BS 750:2012 BS 6165:2002 surface box frames and covers. extinguishers of the aerosol type. Fire hydrant systems equipment – Part 1: Specifi- Liquid fire-extinguishing media – Part 1: Hand- BS 5041-1:1987 cation for landing valves for wet risers. PAS 2013-1:2013 applied units for use on Class F fires (up to 3l or up to 5l cooking media). Fire hydrant systems equipment – Part 2: Specifi- BS 5041-2:1987 cation for landing valves for dry risers. Fire hydrant systems equipment – Part 3: Specifi- BS 5041-3:1975 cation for inlet breechings for dry riser inlets. Fire Blankets Specification for non-percolating layflat delivery BS 6391:2009 BS EN 1869:1997 Fire blankets. hoses and hose assemblies for fire fighting. BS EN 14339:2005 Underground fire hydrants. Fire-fighting hoses — Non-percolating layflat Hose Reels BS EN 14540:2005 hoses for fixed systems. Fixed firefighting systems – Hose systems Fire-fighting hoses – Semi-rigid hoses for fixed BS EN 671-1:2012 BS EN 694:2014 Part 1: Hose reels with semi-rigid hose. systems. Fixed firefighting systems — Hose systems BS EN 671-2:2012 BS EN 14384:2005 Pillar Fire Hydrant. Part 2: Hose systems with lay-flat hose. BS EN 15182-2:2007 Hand-held branchpipes for fire service use – Part +A1:2009 2: Combination branchpipes PN 16. Hand-held branchpipes for fire service use – Part Fire Extinguishing Systems BS EN 15182-3:2007 3: Smooth bore jet and/or one fixed spray jet +A1:2009 angle branchpipes PN 16. Evaluation Guideline for fixed dry aerosol fire BRL-K23001/04 extinguishing components. BS EN 15182-4:2007 Hand-held branchpipes for fire service use – Part +A1:2009 4: High pressure branchpipes PN40. Fixed fire fighting systems – Gas BS EN 15004-1:2008 extinguishing systems – Part 1: Design, Portable equipment for projecting extinguishing installation and maintenance. agents supplied by fire fighting pumps. Portable BS EN 15767-2:2009 monitors – Part 1: General requirements for portable monitor assemblies. Portable equipment for projecting extinguishing BAFE Standards* BS EN 15767-3:2010 agents supplied by fire fighting pumps. Portable Contract Maintenance of Portable Fire monitors – Part 3: Foam devices. SP101/ST104 Extinguishers incorporating Registered Fire Extinguisher Service Technicians. Fire Detection and Alarm Systems – system Fire Extinguishers SP203-1 design, installation, commissioning and maintenance. Mobile fire extinguishers — BS EN 1866-1:2007 Part 1: Characteristics, performance and test Fixed Gaseous Fire Suppression Systems – methods. SP203-3 system design, installation, commissioning and maintenance. Mobile fire extinguishers — Emergency Lighting Systems – system design, Part 2: Requirements for the construction, SP203-4 pressure resistance and mechanical tests installation, commissioning and maintenance. BS EN 1866-2:2014 for extinguishers, with a maximum allowable * Applicable to UK only pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1. Mobile fire extinguishers — Fire Detection and Fire Alarm Devices Part 3: Requirements for the assembly , BS EN 1866-3:2013 construction and pressure resistance of for Dwellings CO2 extinguishers which comply with the requirements of EN 1866-1. Fire detection and fire alarm devices for dwellings. BS 5446-2:2003 Part 2: Specification for heat alarms. BS EN 3-7:2004 Characteristics, performance requirements and +A1:2007 test methods. Fire detection and fire alarm devices for dwellings BS 5446-3:2005 – Part 3: Specification for smoke alarm kits for Additional requirements to EN 3-7 for the deaf and hard of hearing people. construction, resistance BS EN 3-8:2006 to pressure and mechanical tests for Detection and alarm devices for dwellings – Part 3: extinguishers with a maximum allowable BS 5446-3:2015 Specification for fire alarm and carbon monoxide pressure equal to or lower than 30 bar. alarm systems for deaf and hard of hearing people. Additional requirements to EN 3-7 for pressure Electrical apparatus for the detection of carbon BS EN 3-9:2006 resistance of CO2 extinguishers. BS EN 50291-1:2010 monoxide in domestic premises – Part 1: Test methods & performance requirements. Key: Kitemark and CE marking available on this standard Kitemark available on this standard CE marking available for this standard Fire Detection and Fire Alarm Devices for Fire Doors Dwellings – continued Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, BS EN 16034:2014 Electrical apparatus for continuous operation performance characteristics. Fire resisting and/or in a fixed installations in recreational vehicles smoke control characteristics. BS EN 50291-2:2010 and similar premises including recreational craft — Additional test methods and performance Fire resistance and smoke control tests for door requirements. and shutter assemblies, openable windows and BS EN 1634-1:2014 elements of building hardware. Fire resistance test Electrical apparatus for the detection of for door and shutter assemblies and openable BS EN 50194-1:2009 combustible gases in domestic premises – Test windows. methods and performance requirements. Fire tests on building materials and structures. BS EN 14604:2005 Smoke alarm devices. BS 476-22:1987 Method for determination of the fire resistance of non-load bearing elements of construction. Fire Detection and Fire Alarm System Components/Devices Emergency Lighting Fire Detection and Fire Alarm Systems BS EN 60598-1:2015 Light fixtures. General requirements and tests. BS EN 54-2:1998 – Part 2. Control and Indicating Equipment. BS EN 60598-2-22: LLight fixtures. Particular requirements. BS EN 54–3: Fire Detection and Fire Alarm Systems 2014 Luminaires for emergency lighting. 2001/2014 – Part 3. Fire Alarm Devices – Sounders. Light fixtures. Particular requirements for battery BS EN 61347-2-7: Fire Detection and Fire Alarm Systems supplied electronic controlgear for emergency BS EN 54-4:1997 2012 – Part 4. Power Supply Equipment. lighting (self-contained). Lamp controlgear. Particular requirements for Fire Detection and Fire Alarm Systems BS EN 61347-2-13: BS EN 54-5:2000 AC or DC supplied electronic controlgear for LED – Part 5. Heat Detectors – Point Detectors. 2014 modules. Fire Detection and Fire Alarm Systems BS EN 54-7:2000 – Part 7. Smoke Detectors – Point Detectors using BS EN 50171:2001 Central power supply systems. Scattered Light or Ionization. Automatic test systems for battery powered Fire Detection and Fire Alarm Systems – Part 10. BS EN 62034:2012 BS EN 54-10:2002 emergency escape lighting. Flame Detectors and Point Detectors. Fire Detection and Fire Alarm Systems BS EN 54–11:2001 – Part 11. Manual Call Points. Fire Alarm – Suppression and Emergency Lighting Fire Detection and Fire Alarm Systems BS EN 54-12:2002 Fire detection and fire alarm systems for – Part 12. Optical Beam Smoke Detectors. buildings. Code of practice for design, installation, BS 5839-1:2013 Fire detection and fire alarm systems commissioning and maintenance of systems in BS EN 54-13:2005 — Part 13: Compatibility assessment of system non-domestic premises. components. Fire detection and fire alarm systems for Fire Detection and Fire Alarm Systems buildings. Code of practice for the design, BS EN 54-16:2008 – Part 16. Voice Alarm Control and Indicating BS 5839-6:2013 installation, commissioning and maintenance of Equipment. fire detection and fire alarm systems in domestic premises. Fire Detection and Fire Alarm Systems BS EN 54-17:2005 – Part 17. Short Circuit Isolator Modules. Fire detection and fire alarm systems for buildings. Code of practice for the design, Fire Detection and Fire Alarm Systems BS 5839-8:2013 BS EN 54-18:2005 installation, commissioning and maintenance of – Part 18. Input / Output Modules. voice alarm systems. Fire Detection and Fire Alarm Systems Fixed firefighting systems. Gas extinguishing BS EN 54-20:2006 BS EN 15004-1:2008 – Part 20. Aspirating Smoke Detectors. systems. Design, installation and maintenance. Fire Detection and Fire Alarm Systems Emergency lighting. Code of practice for the BS EN 54-21:2006 BS 5266-1:2011 – Part 21. Alarm Transmission and Fault Warning emergency escape lighting of premises. Routing Equipment. BAFE approval can also be achieved for the above Fire detection and fire alarm systems – Part 23. BS EN 54-23:2010 design, installation and maintenance standards.* Fire Alarm Devices – Visual Alarm Systems. * Applicable to UK only Fire Detection and Fire Alarm Systems – Part 24. BS EN 54-24:2008 Components of Voice – Loud Speaker. NPFA 72:2016 National Fire Alarm and Signalling Code. Fire Detection and Fire Alarm Systems – Part 25. BS EN 54-25:2008 Components using Radio Links. We are a Notified Body for the following Directives and Regulation: Fixed Fire Fighting Systems – Components for Gas Extinguishing Systems - Part 1: Requirements Construction Products Regulation (CPR) BS EN 12094-1:2003 and Test Methods for Electrical Automatic Control Electro Magnetic Compatibility (EMC) and Delay Devices. Low Voltage Directive (LVD) Fixed firefighting systems. Components for gas BS EN
Recommended publications
  • Product Certification
    Product Certification A comprehensive guide to BSI’s product certification services KITEMARK™ Table of contents 1 BSI Overview - NRTL service for the US and Canada in coalition with MET labs 2.15 - RADMAC - EN 442 radiators and convectors 2.16 BSI Overview 1.1 - STB Mark - certification in Belarus 2.16 What is Product Certification? 1.2 - Keymark - EU construction standards 2.16 Why choose BSI for Product Certification? 1.3 - REAS - Electrical Products to Australia & New Zealand Market 2.17 - EFSG - European Fire & Safety Group 2.17 - VCA certification - Vehicle Certification Agency 2.18 2 Product Certification Schemes and Services - NCS International 2.18 BSI Kitemark 2.2 Benchmark 2.4 3 Section 3 – EU directives CE marking 2.5 ATEX Equipment Directive (94/9/EC) | (99/92.EC) 3.1 Verification Certificate 2.7 Boiler Efficiency Directive (92/42/EEC) 3.2 Green Deal 2.9 Gas Appliances Directive (GAD - 2009/142/EC ) 3.3 GS Certification (pending) 2.10 Lift Directive (LD 95/16/EC) 3.4 Gap Analysis 2.10 Marine Directive (MED 96/98/EC) 3.5 Other Schemes BSI can offer: 2.11 - IEC Certification Schemes for Electronic Products 2.11 Low Voltage Directive (2006/95/EC) 3.6 - IEC Quality Assessment System for Electrtronic Components 2.12 Non Automatic Weighing Instruments Directive (NAWI) - CCA certification - CENELEC Certification Agreement 2.14 90/384/EEC | 93/68/EEC | SI 2000/323) 3.7 - ENEC mark - applicable for Electro technology 2.14 Personal Protective Equipment Directive (PPE 89/686/EEC) 3.8 >> ii Pressure Equipment Directive (PED 97/23/EC)
    [Show full text]
  • Snapshot of the Current Situation for Standards to Be Cited in the OJ Under the 2015-04-03 Page 1 CPR
    CEN - Construction sector Snapshot of the current situation for Standards to be cited in the OJ under the 2015-04-03 Page 1 CPR 1. Introduction The objective of the CEN Construction Sector Snapshot is to provide standardizers and users of the standards with an overview of: - the draft standards developed by CEN and ECISS Technical Committees, which will be cited in the Official Journal under Regulation 305/2011; - the amendments and revisions of harmonized product standards (hEN) already cited in the OJEU. Priority is given to the 'market' vision of the Standard. Therefore, corrigenda, amendments or revisions are not totalized separately but in a group, which progress is measured according to the global progress for the purpose. The labels used in the different sections of the snapshot can be understood as follows: Generic part of a Standard reference without date or function (for Standard: more details see the 'linked work item' description). Title: English title of the (draft) standard Gives the unique CEN Work Item identification and, if existing, the the Linked Work Item: full Standard reference Gives the last registered (date of the Snapshot) evolution in major Last realized: steps (description and internal milestone numbering) for each Work Item Gives references and dates from the registered history in the Official OJEU: Journal from the European Commission. Date of withdrawal registered in the CEN database. There may be a DOW: difference with the dates cited in the OJEU (last minute change or registration time discrepancies). Gives a list of all mandates linked to the concerned Work Item (also Man: manadates which are not specifically linked to the CPR).
    [Show full text]
  • DNVGL-ST-0145 Offshore Substations
    STANDARD DNVGL-ST-0145 Edition April 2016 Offshore substations The electronic pdf version of this document found through http://www.dnvgl.com is the officially binding version. The documents are available free of charge in PDF format. DNV GL AS FOREWORD DNV GL standards contain requirements, principles and acceptance criteria for objects, personnel, organisations and/or operations. © DNV GL AS April 2016 Any comments may be sent by e-mail to [email protected] This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of this document. CHANGES – CURRENT General This document supersedes DNV-OS-J201, November 2013. Text affected by the main changes in this edition is highlighted in red colour. However, if the changes involve a whole chapter, section or sub-section, normally only the title will be in red colour. On 12 September 2013, DNV and GL merged to form DNV GL Group. On 25 November 2013 Det Norske Veritas AS became the 100% shareholder of Germanischer Lloyd SE, the parent company of the GL Group, and on 27 November 2013 Det Norske Veritas AS, company registration number 945 748 931, changed its name to DNV GL AS. For further information, see www.dnvgl.com. Any reference in this document to “Det Norske Veritas AS”, “Det Norske Veritas”, “DNV”, “GL”, “Germanischer Lloyd SE”, “GL Group” or any other legal entity name or trading name presently owned by the DNV GL Group shall therefore also be considered a reference to “DNV GL AS”.
    [Show full text]
  • Harmoneerituks Tunnistatud Standardid
    Avaldatud 18.09.2018 Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Ilmub alates 1993. aastast SISUKORD UUED STANDARDID JA STANDARDILAADSED DOKUMENDID ......................................... 3 ASENDATUD VÕI TÜHISTATUD EESTI STANDARDID JA STANDARDILAADSED DOKUMENDID ....................................................................................................................... 15 STANDARDIKAVANDITE ARVAMUSKÜSITLUS .................................................................. 23 TÕLKED KOMMENTEERIMISEL .......................................................................................... 46 TÜHISTAMISKÜSITLUS ........................................................................................................ 47 UUED EESTIKEELSED STANDARDID JA STANDARDILAADSED DOKUMENDID ........... 48 STANDARDIPEALKIRJADE MUUTMINE .............................................................................. 50 TAASKEHTESTATUD EESTI STANDARDID ........................................................................ 51 EESTI STANDARDITE TÄHISTE MUUDATUSED ................................................................ 51 UUED STANDARDID JA STANDARDILAADSED DOKUMENDID 01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOON EVS JUHEND 4:2018 Eesti standardi ja standardilaadse dokumendi ülesehitus,
    [Show full text]
  • (EU) No 305/2011 of the European Parliament and Of
    C 209/14 EN Official Journal of the European Union 10.6.2016 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 209/03) The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards. Date of applicability of the Reference and title of the standard Reference of Date of the end of the co- ESO (1) standard as a harmonised (and reference document) superseded standard existence period standard (1) (2) (3) (4) (5) CEN EN 1:1998 1.1.2008 Date expired Flued oil stoves with vaporizing burners (1.1.2009) EN 1:1998/A1:2007 1.1.2008 Date expired (1.1.2009) CEN EN 40-4:2005 1.10.2006 Date expired Lighting columns — Part 4: Requirements for (1.10.2007) reinforced and prestressed concrete lighting columns EN 40-4:2005/AC:2006 1.1.2007 Date expired (1.1.2007) CEN EN 40-5:2002 1.2.2003 Date expired Lighting columns — Part 5: Requirements for (1.2.2005) steel lighting columns CEN EN 40-6:2002 1.2.2003 Date expired Lighting columns — Part 6: Requirements for (1.2.2005) aluminium lighting columns CEN EN 40-7:2002 1.10.2003 Date expired Lighting columns — Part 7: Requirements for (1.10.2004) fibre reinforced polymer composite lighting columns CEN EN 54-2:1997 1.1.2008
    [Show full text]
  • Fire Standards Brochure
    BSI fire testing and certification A comprehensive guide Fire standards – what BSI can certify and test Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and Specification for small disposable fire BS 336:2010 BS 6165:2002 ancillary equipment extinguishers of the aerosol type Specification for underground fire hydrants Liquid fire-extinguishing media – Part 1: BS 750:2012 and surface box frames and covers PAS 2013-1:2013 Hand-applied units for use on Class F fires (up to 3l or up to 5l cooking media) Fire hydrant systems equipment – Part 1: BS 5041-1:1987 Specification for landing valves for wet risers SANS 1910:2009 Portable refillable fire extinguishers Fire hydrant systems equipment – Part 2: Portable rechargeable fire extinguishers – BS 5041-2:1987 SANS 1567:2014 Specification for landing valves for dry risers CO2 type extinguishers Fire hydrant systems equipment – Part 3: PAS 2013-1 specifies requirements for Liquid BS 5041-3:1975 Specification for inlet breechings for dry riser PAS 2013-1:2013 Fire-Extinguishing Media – Part 1: Hand- inlets +C1:2014 applied units for use on Class F fires Specification for non-percolating layflat (up to 3L or up to 5L cooking media) BS 6391:2009 delivery hoses and hose assemblies for fire Portable fire extinguishers — Classification, AS/NZS 1850:2009 fighting rating and performance testing BS EN 14339:2005 Underground fire hydrants Portable fire extinguishers. Part 1: General AS/NZS 1841.1:2007 requirements Fire-fighting hoses — Non-percolating layflat BS EN 14540:2005 Portable fire extinguishers. Part 2: Specific hoses for fixed systems AS/NZS 1841.2:2007 requirements for water type extinguishers Fire-fighting hoses – Semi-rigid hoses for BS EN 694:2014 fixed systems Portable fire extinguishers.
    [Show full text]
  • BSI Assurance UK Limited
    Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK BSI Assurance UK Limited Issue No: 218 Issue date: 16 September 2021 Kitemark Court Sales Enquiry Tel: +44 (0)845 080 9000 Davy Avenue Fax: +44 (0)1908 228060 Knowlhill Sales Enquiry Email: [email protected] 0003 Milton Keynes BSI Website: www.bsigroup.com Accredited to MK5 8PP Regulatory Contact: Maria Crane ISO/IEC 17065:2012 to provide product Tel: +44 (0)1908 814724 conformity certification Email: [email protected] Locations where certification activities covered by the above Accreditation Standard are undertaken Kitemark Court Kitemark House Davy Avenue Maylands Avenue Knowlhill Hemel Hempstead Milton Keynes Hertfordshire MK5 8PP HP2 4SQ UNITED KINGDOM UNITED KINGDOM Holywell Park Room 1006-1011,10/F Ashby Road Ciro’s Plaza Loughborough 388 Nanjing W. RD Leicestershire Shanghai 200003 LE11 3AQ PR CHINA UNITED KINGDOM Say Building Suite 208 John M. Keynesplein 9, 4th floor Sultan Business Centre 1066 EP PO Box 49400 Amsterdam Dubai NETHERLANDS UNITED ARAB EMIRATES 210 Amarande Avenue Regus Business Park Menlyn Maine Waterkloof Ext 2 0181 SOUTH AFRICA Flexible Scope This Certification Body is additionally accredited to develop and add additional product standards within the highlighted product areas, having demonstrated competence in their design and development process for these areas. Assessment Manager: WC1 Page 1 of 120 Schedule of Accreditation issued by United Kingdom
    [Show full text]
  • Standards Published in 2011
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 152-2:1988/AC1:1989 Date published 11 APRIL 2011 Test methods for wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Part 2 : Application by methods other than brushing. 2. S.R. CR 1350:1993 Date published 21 SEPTEMBER 2011 Investigation of Syntaxes for Existing Interchange Formats to be Used in Healthcare 3. S.R. CR 1460:1994 Date published 21 SEPTEMBER 2011 Packaging – Energy Recovery from Used Packaging 4. S.R. CR 12161:1995 Date published 24 SEPTEMBER 2011 A method for defining profiles for healthcare 5. S.R. CR 12340:1996 Date published 21 SEPTEMBER 2011 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems 6. S.R. CR 1901:1995 Date published 21 SEPTEMBER 2011 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete 7. S.R. CR 12776:1997 Date published 21 SEPTEMBER 2011 Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials 8. S.R. CR 12793:1997 Date published 21 SEPTEMBER 2011 Measurement of the carbonation depth of hardened concrete 9. S.R. CR 12804:1997 Date published 21 SEPTEMBER 2011 Conceptual Model and Taxonomy for Information Systems Engineering 10. S.R. CR 12894:1997 Date published 21 SEPTEMBER 2011 Biotechnology - Microorganisms - Examination of the various existing lists of animal pathogens and production of a report 11. S.R. CR 13156:1998 Date published 21 SEPTEMBER 2011 Some occupational profiles for practitioners in logistics 12.
    [Show full text]
  • Official Journal of the European Union C 378/1
    Official Journal C 378 of the European Union Volume 58 English edition Information and Notices 13 November 2015 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2015/C 378/01 Commission communication in the framework of the implementation of Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 1 2015/C 378/02 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/ 2011) (1) . 4 2015/C 378/03 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 6 EN (1) Text with EEA relevance 13.11.2015 EN Official Journal of the European Union C 378/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication
    [Show full text]
  • Overview All Kiwa Notifications
    For more information contact [email protected] Overview all CPR notifications within the Kiwa Group 0 0 dd 7-05-2019 Product Technical specification AVCP Productscope Kiwa Area system Notifications 1 0 - PRECAST NORMAL/LIGHTWEIGHT/AUTOCLAVED AERATED CONCRETE PRODUCTS. x 1 EAD 010013-00-0301 Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing 1 EAD 010003-00-0301 Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC) 1 EAD 010001-00-0301 Precast concrete composite wall with point connectors 1 EN 15037-1:2008 2+ Precast concrete products - Beam-and-block floor systems - Beams x 1 EN 15037-3:2009+A1:2011 2+ Precast concrete products - Beam-and-block floor systems - Clay blocks x 1 EN 15037-2:2009+A1:2011 2+ Precast concrete products - Beam-and-block floor systems - Concrete blocks x 1 EN 15037-4:2010+A1:2013 2+ Precast concrete products - Beam-and-block floor systems - Expanded polystyrene blocks x 1 EN 15037-5:2013 2+ Precast concrete products - Beam-and-block floor systems - Lightweight blocks for simple formwork x 1 EN 14844:2006+A2:2011 2+/4 Precast concrete products - Box culverts x 1 EN 15050:2007+A1:2012 2+ Precast concrete products - Bridge elements x 1 EN 12839:2012 4 Precast concrete products - Elements for fences 1 EN 13747:2005+A2:2010 2+ Precast concrete products - Floor plates for floor systems x 1 EN 12737:2004+A1:2007 2+ Precast concrete products - Floor slats for livestock x 1 EN 14991:2007 2+ Precast concrete
    [Show full text]
  • Fire Detection & Fire Alarm Systems in Heavy Duty Vehicles
    Fire detection & fire alarm systems in heavy duty vehicles WP1 – Survey of fire detection in vehicles Ola Willstrand, Peter Karlsson, Jonas Brandt SP Technical Research Institute of Sweden Research SP Technical This project was partly funded by FFI SP Fire Research SP Report 2015:68 Fire detection & fire alarm systems in heavy duty vehicles WP1 – Survey of fire detection in vehicles Ola Willstrand, Peter Karlsson, Jonas Brandt 3 Abstract The work presented in this report is part of a larger project about fire detection and fire alarm systems in heavy duty vehicles. The work presented here covers fire detection technologies, standards and guidelines and research in the field. The purpose of this work is mainly to provide background information for the other work packages in the project. An understanding of different types of detection technologies; how the systems function and what their advantages and disadvantages are, is provided. An extensive summary of all relevant standards and guidelines, including those used in adjacent fields like the rail, aviation and marine industry, provides necessary information to the overall goal of defining an international test standard for fire detection in heavy duty vehicles. At last a short overview of past and ongoing research regarding fire detection in vehicles is presented. Key words: fire detection, detector technologies, vehicles, standards, guidelines SP Sveriges Tekniska Forskningsinstitut SP Technical Research Institute of Sweden SP Report 2015:68 ISBN 978-91-88001-96-2 ISSN 0284-5172 Borås
    [Show full text]