DOCSLIB.ORG

Overview All Kiwa Notifications

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Overview All Kiwa Notifications For more information contact [email protected] Overview all CPR notifications within the Kiwa Group 0 0 dd 7-05-2019 Product Technical specification AVCP Productscope Kiwa Area system Notifications 1 0 - PRECAST NORMAL/LIGHTWEIGHT/AUTOCLAVED AERATED CONCRETE PRODUCTS. x 1 EAD 010013-00-0301 Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing 1 EAD 010003-00-0301 Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC) 1 EAD 010001-00-0301 Precast concrete composite wall with point connectors 1 EN 15037-1:2008 2+ Precast concrete products - Beam-and-block floor systems - Beams x 1 EN 15037-3:2009+A1:2011 2+ Precast concrete products - Beam-and-block floor systems - Clay blocks x 1 EN 15037-2:2009+A1:2011 2+ Precast concrete products - Beam-and-block floor systems - Concrete blocks x 1 EN 15037-4:2010+A1:2013 2+ Precast concrete products - Beam-and-block floor systems - Expanded polystyrene blocks x 1 EN 15037-5:2013 2+ Precast concrete products - Beam-and-block floor systems - Lightweight blocks for simple formwork x 1 EN 14844:2006+A2:2011 2+/4 Precast concrete products - Box culverts x 1 EN 15050:2007+A1:2012 2+ Precast concrete products - Bridge elements x 1 EN 12839:2012 4 Precast concrete products - Elements for fences 1 EN 13747:2005+A2:2010 2+ Precast concrete products - Floor plates for floor systems x 1 EN 12737:2004+A1:2007 2+ Precast concrete products - Floor slats for livestock x 1 EN 14991:2007 2+ Precast concrete products - Foundation elements x 1 EN 12794:2005+A1:2007/AC:2008 2+ Precast concrete products - Foundation piles x 1 EN 1168:2005+A3:2011 2+ Precast concrete products - Hollow core slabs x 1 EN 13225:2013 2+ Precast concrete products - Linear structural elements x 1 EN 12843:2004 2+ Precast concrete products - Masts and poles x 1 EN 15435:2008 4 Precast concrete products - Normal weight and lightweight concrete shuttering blocks 1 EN 13978-1:2005 2+ Precast concrete products - Precast concrete garages x 1 EN 15258:2008 2+ Precast concrete products - Retaining wall elements x 1 EN 13224:2011 2+ Precast concrete products - Ribbed floor elements x 1 EN 13693:2004+A1:2009 2+ Precast concrete products - Special roof elements x 1 EN 14843:2007 2+ Precast concrete products - Stairs x 1 EN 14992:2007+A1:2012 2+/4 Precast concrete products - Wall elements x 1 EN 15498:2008 4 Precast concrete products - Wood-chip concrete shuttering blocks 1 EN 12602:2016 2+/4 Prefabricated reinforced components of autoclaved aerated concrete. x 1 EN 1520:2011 2+/4 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement x 1 EAD 010028-00-0103 Shallow and reusable foundation kit for lightweight structures 2 0 - DOORS, WINDOWS, SHUTTERS, GATES AND RELATED BUILDING HARDWARE. x 2 EAD 020002-00-0404 Balcony (and terrace) glazing system without vertical frames 2 EN 1154:1996/A1:2002/AC:2006 1 Building hardware - Controlled door closing devices 2 EN 1158:1997/A1:2002/AC:2006 1 Building hardware - Door coordinator devices 2 EN 1155:1997/A1:2002 1 Building hardware - Electrically powered hold-open devices for swing doors 2 EN 179:2008 1 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes 2 EN 14846:2008 1 Building hardware - Locks and latches - Electromechanically operated locks and striking plates 2 EN 12209:2003/AC:2005 1 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates 2 EN 1125:2008 1 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes 2 EN 1935:2002/AC:2003 1 Building hardware - Single-axis hinges 2 EN 13561:2004+A1:2008 4 External blinds 2 EN 13241-1:2003+A1:2011 Industrial, commercial, garage doors and gates 2 EAD 020029-00-1102 Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel 2 EAD 020001-01-0405 Multi-axis concealed hinge assemblies 2 EN 16034:2014 1 Pedestrian doorsets, industrial, commercial, garage doors and openable windows x 2 EAD 020011-00-0405 Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance. 2 EN 13659:2004+A1:2008 4 Shutters 2 EN 14351-1:2006+A1:2010 1/3/4 Windows and doors - Windows and external pedestrian doorsets x 3 0 - MEMBRANES, INCLUDING LIQUID APPLIED AND KITS (FOR WATER AND/OR WATER VAPOUR CONTROL) x 3 EAD 030065-00-0402 Composite roof waterproofing kit 3 EN 14967:2006 3/4 Flexible sheets for waterproofing - Bitumen damp proof courses x 3 EN 13969:2004/A1:2006 1/2+/3/4 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets x 3 EN 13970:2004/A1:2006 1/3/4 Flexible sheets for waterproofing - Bitumen water vapour control layers x 3 EN 14909:2012 1/3/4 Flexible sheets for waterproofing - Plastic and rubber damp proof courses x 3 EN 13967:2012 1/2+/3/4 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet x 3 EN 13956:2012 1/2+/3/4 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing x 3 EN 13984:2013 1/3/4 Flexible sheets for waterproofing - Plastic and rubber vapour control layers x 3 EN 13707:2004+A2:2009 1/2+/3/4 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing x 3 EN 13859-1:2010 1/3/4 Flexible sheets for waterproofing - Underlays for discontinuous roofing x 3 EN 13859-2:2010 1/3/4 Flexible sheets for waterproofing - Underlays for walls x 3 ETAG 033 - Art 66(3) Liquid applied Bridge Deck waterproofing Kits 3 ETAG 005 - Art 66(3) Liquid Applied Roof Waterproofing Kits 3 EAD 030019-00-0402 Liquid applied roof waterproofing on the basis of polysiloxane 3 EN 14891:2012/AC:2012 3 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives x 3 EAD 030218-00-0402 Membrane for use as roof underlay 3 EAD 030092-00-0605 Non-flexible mineral sealing slurry kit on the basis of cement 3 EAD 030155-00-0402 one component bituminen-polyurethane resin for flashing application 3 EN 15814:2011+A2:2014 1/3/4 Polymer modified bituminous thick coatings for waterproofing x Page 1 of 11 For more information contact [email protected] Product Technical specification AVCP Productscope Kiwa Area system Notifications 3 ETAG 006 - Art 66(3) Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes 3 ETAG 022 - 1 - Art 66(3) Watertight Covering Kits for Wet Room floors and or walls - Part 1: Liquid Applied Coverings with or without wearing surface 3 ETAG 022 - 2 - Art 66(3) Watertight Covering Kits for Wet Room floors and or walls - Part 2: Kits based on flexible Sheets 3 ETAG 022 - 3 - Art 66(3) Watertight Covering Kits for Wet Room floors and or walls - Part 3: Kits based on inherently watertight Boards 4 0 - THERMAL INSULATION PRODUCTS.COMPOSITE INSULATING KITS/SYSTEMS. x 4 EAD 040777-00-1201 Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing 4 EAD 040773-00-1201 Expanded polystyrene foam boards as load bearing layer and thermal insulation outside the waterproofing 4 ETAG 004 - Art 66(3) External Thermal Insulation Composite Systems with Rendering 4 EAD 040089-00-0404 External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings 4 EAD 040650-00-1201 Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing 4 EAD 040394-00-1201 Factory made cellular glass loose fill 4 EAD 040090-00-1201 Factory-made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/ or acoustical insulation 4 EAD 040288-00-1201 Factory-made thermal and acoustic insulations made of polyester fibres 4 EAD 040005-00-1201 Factory-made thermal and/or acoustic insulation products made of vegetable or anymal fibres 4 EAD 040643-00-1201 Fiber reinforced silica aerogel thermal insulation 4 EAD 040016-00-0404 Glass fibre mesh for reinforcement of cement based renderings 4 EAD 040313-00-1201 In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork 4 EAD 040138-01-1201 In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres 4 EAD 040456-00-1201 In-situ formed loose-fill thermal and/or acoustic insulation material made of animal fibres 4 EAD 040369-00-1201 Insulation made of loose-fill or compound granulated expanded cork 4 EAD 040010-00-1201 Insulation product made of expanded perlite (EPB) 4 ETAG 031 - 1 - Art 66(3) Inverted Roofs Insulation Kits - Part 1: General 4 ETAG 031 - 2 - Art 66(3) Inverted Roofs Insulation Kits - Part 2: Insulation with protective Finish 4 EAD 040427-00-0404 Kits for external thermal insulation composite system (ETICS) with mortar as thermal insulation product and renderings or discontinuous claddings as exterior skin 4 EAD 040287-00-0404 Kits for external thermal insulation composite system (ETICS) with panels as thermal insulation product and discontinuous claddings as exterior skin 4 EN 15732:2012 1/3/4 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) x 4 EAD 040037-00-1201 Low lambda composite boards made of mineral wool fibres and aerogel additives 4 EAD 040049-00-0502 Polyurethane (PU) foam mat to be used for impact sound insulation 4 EAD 040048-01-0502 Rubber fibre mat to be used for impact sound insulation.
Load more

Recommended publications
  • Product Certification
    Product Certification A comprehensive guide to BSI’s product certification services KITEMARK™ Table of contents 1 BSI Overview - NRTL service for the US and Canada in coalition with MET labs 2.15 - RADMAC - EN 442 radiators and convectors 2.16 BSI Overview 1.1 - STB Mark - certification in Belarus 2.16 What is Product Certification? 1.2 - Keymark - EU construction standards 2.16 Why choose BSI for Product Certification? 1.3 - REAS - Electrical Products to Australia & New Zealand Market 2.17 - EFSG - European Fire & Safety Group 2.17 - VCA certification - Vehicle Certification Agency 2.18 2 Product Certification Schemes and Services - NCS International 2.18 BSI Kitemark 2.2 Benchmark 2.4 3 Section 3 – EU directives CE marking 2.5 ATEX Equipment Directive (94/9/EC) | (99/92.EC) 3.1 Verification Certificate 2.7 Boiler Efficiency Directive (92/42/EEC) 3.2 Green Deal 2.9 Gas Appliances Directive (GAD - 2009/142/EC ) 3.3 GS Certification (pending) 2.10 Lift Directive (LD 95/16/EC) 3.4 Gap Analysis 2.10 Marine Directive (MED 96/98/EC) 3.5 Other Schemes BSI can offer: 2.11 - IEC Certification Schemes for Electronic Products 2.11 Low Voltage Directive (2006/95/EC) 3.6 - IEC Quality Assessment System for Electrtronic Components 2.12 Non Automatic Weighing Instruments Directive (NAWI) - CCA certification - CENELEC Certification Agreement 2.14 90/384/EEC | 93/68/EEC | SI 2000/323) 3.7 - ENEC mark - applicable for Electro technology 2.14 Personal Protective Equipment Directive (PPE 89/686/EEC) 3.8 >> ii Pressure Equipment Directive (PED 97/23/EC)
    [Show full text]
  • Snapshot of the Current Situation for Standards to Be Cited in the OJ Under the 2015-04-03 Page 1 CPR
    CEN - Construction sector Snapshot of the current situation for Standards to be cited in the OJ under the 2015-04-03 Page 1 CPR 1. Introduction The objective of the CEN Construction Sector Snapshot is to provide standardizers and users of the standards with an overview of: - the draft standards developed by CEN and ECISS Technical Committees, which will be cited in the Official Journal under Regulation 305/2011; - the amendments and revisions of harmonized product standards (hEN) already cited in the OJEU. Priority is given to the 'market' vision of the Standard. Therefore, corrigenda, amendments or revisions are not totalized separately but in a group, which progress is measured according to the global progress for the purpose. The labels used in the different sections of the snapshot can be understood as follows: Generic part of a Standard reference without date or function (for Standard: more details see the 'linked work item' description). Title: English title of the (draft) standard Gives the unique CEN Work Item identification and, if existing, the the Linked Work Item: full Standard reference Gives the last registered (date of the Snapshot) evolution in major Last realized: steps (description and internal milestone numbering) for each Work Item Gives references and dates from the registered history in the Official OJEU: Journal from the European Commission. Date of withdrawal registered in the CEN database. There may be a DOW: difference with the dates cited in the OJEU (last minute change or registration time discrepancies). Gives a list of all mandates linked to the concerned Work Item (also Man: manadates which are not specifically linked to the CPR).
    [Show full text]
  • DNVGL-ST-0145 Offshore Substations
    STANDARD DNVGL-ST-0145 Edition April 2016 Offshore substations The electronic pdf version of this document found through http://www.dnvgl.com is the officially binding version. The documents are available free of charge in PDF format. DNV GL AS FOREWORD DNV GL standards contain requirements, principles and acceptance criteria for objects, personnel, organisations and/or operations. © DNV GL AS April 2016 Any comments may be sent by e-mail to [email protected] This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of this document. CHANGES – CURRENT General This document supersedes DNV-OS-J201, November 2013. Text affected by the main changes in this edition is highlighted in red colour. However, if the changes involve a whole chapter, section or sub-section, normally only the title will be in red colour. On 12 September 2013, DNV and GL merged to form DNV GL Group. On 25 November 2013 Det Norske Veritas AS became the 100% shareholder of Germanischer Lloyd SE, the parent company of the GL Group, and on 27 November 2013 Det Norske Veritas AS, company registration number 945 748 931, changed its name to DNV GL AS. For further information, see www.dnvgl.com. Any reference in this document to “Det Norske Veritas AS”, “Det Norske Veritas”, “DNV”, “GL”, “Germanischer Lloyd SE”, “GL Group” or any other legal entity name or trading name presently owned by the DNV GL Group shall therefore also be considered a reference to “DNV GL AS”.
    [Show full text]
  • Harmoneerituks Tunnistatud Standardid
    Avaldatud 18.09.2018 Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Ilmub alates 1993. aastast SISUKORD UUED STANDARDID JA STANDARDILAADSED DOKUMENDID ......................................... 3 ASENDATUD VÕI TÜHISTATUD EESTI STANDARDID JA STANDARDILAADSED DOKUMENDID ....................................................................................................................... 15 STANDARDIKAVANDITE ARVAMUSKÜSITLUS .................................................................. 23 TÕLKED KOMMENTEERIMISEL .......................................................................................... 46 TÜHISTAMISKÜSITLUS ........................................................................................................ 47 UUED EESTIKEELSED STANDARDID JA STANDARDILAADSED DOKUMENDID ........... 48 STANDARDIPEALKIRJADE MUUTMINE .............................................................................. 50 TAASKEHTESTATUD EESTI STANDARDID ........................................................................ 51 EESTI STANDARDITE TÄHISTE MUUDATUSED ................................................................ 51 UUED STANDARDID JA STANDARDILAADSED DOKUMENDID 01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOON EVS JUHEND 4:2018 Eesti standardi ja standardilaadse dokumendi ülesehitus,
    [Show full text]
  • (EU) No 305/2011 of the European Parliament and Of
    C 209/14 EN Official Journal of the European Union 10.6.2016 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 209/03) The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards. Date of applicability of the Reference and title of the standard Reference of Date of the end of the co- ESO (1) standard as a harmonised (and reference document) superseded standard existence period standard (1) (2) (3) (4) (5) CEN EN 1:1998 1.1.2008 Date expired Flued oil stoves with vaporizing burners (1.1.2009) EN 1:1998/A1:2007 1.1.2008 Date expired (1.1.2009) CEN EN 40-4:2005 1.10.2006 Date expired Lighting columns — Part 4: Requirements for (1.10.2007) reinforced and prestressed concrete lighting columns EN 40-4:2005/AC:2006 1.1.2007 Date expired (1.1.2007) CEN EN 40-5:2002 1.2.2003 Date expired Lighting columns — Part 5: Requirements for (1.2.2005) steel lighting columns CEN EN 40-6:2002 1.2.2003 Date expired Lighting columns — Part 6: Requirements for (1.2.2005) aluminium lighting columns CEN EN 40-7:2002 1.10.2003 Date expired Lighting columns — Part 7: Requirements for (1.10.2004) fibre reinforced polymer composite lighting columns CEN EN 54-2:1997 1.1.2008
    [Show full text]
  • Fire Standards Brochure
    BSI fire testing and certification A comprehensive guide Fire standards – what BSI can certify and test Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and Specification for small disposable fire BS 336:2010 BS 6165:2002 ancillary equipment extinguishers of the aerosol type Specification for underground fire hydrants Liquid fire-extinguishing media – Part 1: BS 750:2012 and surface box frames and covers PAS 2013-1:2013 Hand-applied units for use on Class F fires (up to 3l or up to 5l cooking media) Fire hydrant systems equipment – Part 1: BS 5041-1:1987 Specification for landing valves for wet risers SANS 1910:2009 Portable refillable fire extinguishers Fire hydrant systems equipment – Part 2: Portable rechargeable fire extinguishers – BS 5041-2:1987 SANS 1567:2014 Specification for landing valves for dry risers CO2 type extinguishers Fire hydrant systems equipment – Part 3: PAS 2013-1 specifies requirements for Liquid BS 5041-3:1975 Specification for inlet breechings for dry riser PAS 2013-1:2013 Fire-Extinguishing Media – Part 1: Hand- inlets +C1:2014 applied units for use on Class F fires Specification for non-percolating layflat (up to 3L or up to 5L cooking media) BS 6391:2009 delivery hoses and hose assemblies for fire Portable fire extinguishers — Classification, AS/NZS 1850:2009 fighting rating and performance testing BS EN 14339:2005 Underground fire hydrants Portable fire extinguishers. Part 1: General AS/NZS 1841.1:2007 requirements Fire-fighting hoses — Non-percolating layflat BS EN 14540:2005 Portable fire extinguishers. Part 2: Specific hoses for fixed systems AS/NZS 1841.2:2007 requirements for water type extinguishers Fire-fighting hoses – Semi-rigid hoses for BS EN 694:2014 fixed systems Portable fire extinguishers.
    [Show full text]
  • BSI Assurance UK Limited
    Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK BSI Assurance UK Limited Issue No: 218 Issue date: 16 September 2021 Kitemark Court Sales Enquiry Tel: +44 (0)845 080 9000 Davy Avenue Fax: +44 (0)1908 228060 Knowlhill Sales Enquiry Email: [email protected] 0003 Milton Keynes BSI Website: www.bsigroup.com Accredited to MK5 8PP Regulatory Contact: Maria Crane ISO/IEC 17065:2012 to provide product Tel: +44 (0)1908 814724 conformity certification Email: [email protected] Locations where certification activities covered by the above Accreditation Standard are undertaken Kitemark Court Kitemark House Davy Avenue Maylands Avenue Knowlhill Hemel Hempstead Milton Keynes Hertfordshire MK5 8PP HP2 4SQ UNITED KINGDOM UNITED KINGDOM Holywell Park Room 1006-1011,10/F Ashby Road Ciro’s Plaza Loughborough 388 Nanjing W. RD Leicestershire Shanghai 200003 LE11 3AQ PR CHINA UNITED KINGDOM Say Building Suite 208 John M. Keynesplein 9, 4th floor Sultan Business Centre 1066 EP PO Box 49400 Amsterdam Dubai NETHERLANDS UNITED ARAB EMIRATES 210 Amarande Avenue Regus Business Park Menlyn Maine Waterkloof Ext 2 0181 SOUTH AFRICA Flexible Scope This Certification Body is additionally accredited to develop and add additional product standards within the highlighted product areas, having demonstrated competence in their design and development process for these areas. Assessment Manager: WC1 Page 1 of 120 Schedule of Accreditation issued by United Kingdom
    [Show full text]
  • Standards Published in 2011
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 152-2:1988/AC1:1989 Date published 11 APRIL 2011 Test methods for wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Part 2 : Application by methods other than brushing. 2. S.R. CR 1350:1993 Date published 21 SEPTEMBER 2011 Investigation of Syntaxes for Existing Interchange Formats to be Used in Healthcare 3. S.R. CR 1460:1994 Date published 21 SEPTEMBER 2011 Packaging – Energy Recovery from Used Packaging 4. S.R. CR 12161:1995 Date published 24 SEPTEMBER 2011 A method for defining profiles for healthcare 5. S.R. CR 12340:1996 Date published 21 SEPTEMBER 2011 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems 6. S.R. CR 1901:1995 Date published 21 SEPTEMBER 2011 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete 7. S.R. CR 12776:1997 Date published 21 SEPTEMBER 2011 Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials 8. S.R. CR 12793:1997 Date published 21 SEPTEMBER 2011 Measurement of the carbonation depth of hardened concrete 9. S.R. CR 12804:1997 Date published 21 SEPTEMBER 2011 Conceptual Model and Taxonomy for Information Systems Engineering 10. S.R. CR 12894:1997 Date published 21 SEPTEMBER 2011 Biotechnology - Microorganisms - Examination of the various existing lists of animal pathogens and production of a report 11. S.R. CR 13156:1998 Date published 21 SEPTEMBER 2011 Some occupational profiles for practitioners in logistics 12.
    [Show full text]
  • Official Journal of the European Union C 378/1
    Official Journal C 378 of the European Union Volume 58 English edition Information and Notices 13 November 2015 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2015/C 378/01 Commission communication in the framework of the implementation of Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 1 2015/C 378/02 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/ 2011) (1) . 4 2015/C 378/03 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 6 EN (1) Text with EEA relevance 13.11.2015 EN Official Journal of the European Union C 378/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication
    [Show full text]
  • BSI Fire Testing and Certification for Fire Products © BSI Group BSI/USA/536/MS/0516/E Fire Standards – Testing and Certification Service
    BSI fire testing and certification for fire products © BSI Group BSI/USA/536/MS/0516/E Fire standards – testing and certification service. Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and ancillary Provisions for evaluating the conformity of a BS 336:2010 BS EN 3-10:2009 equipment. portable fire extinguisher to EN 3-7. Specification for underground fire hydrants and Specification for small disposable fire BS 750:2012 BS 6165:2002 surface box frames and covers. extinguishers of the aerosol type. Fire hydrant systems equipment – Part 1: Specifi- Liquid fire-extinguishing media – Part 1: Hand- BS 5041-1:1987 cation for landing valves for wet risers. PAS 2013-1:2013 applied units for use on Class F fires (up to 3l or up to 5l cooking media). Fire hydrant systems equipment – Part 2: Specifi- BS 5041-2:1987 cation for landing valves for dry risers. Fire hydrant systems equipment – Part 3: Specifi- BS 5041-3:1975 cation for inlet breechings for dry riser inlets. Fire Blankets Specification for non-percolating layflat delivery BS 6391:2009 BS EN 1869:1997 Fire blankets. hoses and hose assemblies for fire fighting. BS EN 14339:2005 Underground fire hydrants. Fire-fighting hoses — Non-percolating layflat Hose Reels BS EN 14540:2005 hoses for fixed systems. Fixed firefighting systems – Hose systems Fire-fighting hoses – Semi-rigid hoses for fixed BS EN 671-1:2012 BS EN 694:2014 Part 1: Hose reels with semi-rigid hose. systems. Fixed firefighting systems — Hose systems BS EN 671-2:2012 BS EN 14384:2005 Pillar Fire Hydrant.
    [Show full text]
  • Fire Detection & Fire Alarm Systems in Heavy Duty Vehicles
    Fire detection & fire alarm systems in heavy duty vehicles WP1 – Survey of fire detection in vehicles Ola Willstrand, Peter Karlsson, Jonas Brandt SP Technical Research Institute of Sweden Research SP Technical This project was partly funded by FFI SP Fire Research SP Report 2015:68 Fire detection & fire alarm systems in heavy duty vehicles WP1 – Survey of fire detection in vehicles Ola Willstrand, Peter Karlsson, Jonas Brandt 3 Abstract The work presented in this report is part of a larger project about fire detection and fire alarm systems in heavy duty vehicles. The work presented here covers fire detection technologies, standards and guidelines and research in the field. The purpose of this work is mainly to provide background information for the other work packages in the project. An understanding of different types of detection technologies; how the systems function and what their advantages and disadvantages are, is provided. An extensive summary of all relevant standards and guidelines, including those used in adjacent fields like the rail, aviation and marine industry, provides necessary information to the overall goal of defining an international test standard for fire detection in heavy duty vehicles. At last a short overview of past and ongoing research regarding fire detection in vehicles is presented. Key words: fire detection, detector technologies, vehicles, standards, guidelines SP Sveriges Tekniska Forskningsinstitut SP Technical Research Institute of Sweden SP Report 2015:68 ISBN 978-91-88001-96-2 ISSN 0284-5172 Borås
    [Show full text]