(EU) No 305/2011 of the European Parliament and Of

Total Page:16

File Type:pdf, Size:1020Kb

(EU) No 305/2011 of the European Parliament and Of C 209/14 EN Official Journal of the European Union 10.6.2016 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 209/03) The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards. Date of applicability of the Reference and title of the standard Reference of Date of the end of the co- ESO (1) standard as a harmonised (and reference document) superseded standard existence period standard (1) (2) (3) (4) (5) CEN EN 1:1998 1.1.2008 Date expired Flued oil stoves with vaporizing burners (1.1.2009) EN 1:1998/A1:2007 1.1.2008 Date expired (1.1.2009) CEN EN 40-4:2005 1.10.2006 Date expired Lighting columns — Part 4: Requirements for (1.10.2007) reinforced and prestressed concrete lighting columns EN 40-4:2005/AC:2006 1.1.2007 Date expired (1.1.2007) CEN EN 40-5:2002 1.2.2003 Date expired Lighting columns — Part 5: Requirements for (1.2.2005) steel lighting columns CEN EN 40-6:2002 1.2.2003 Date expired Lighting columns — Part 6: Requirements for (1.2.2005) aluminium lighting columns CEN EN 40-7:2002 1.10.2003 Date expired Lighting columns — Part 7: Requirements for (1.10.2004) fibre reinforced polymer composite lighting columns CEN EN 54-2:1997 1.1.2008 Date expired Fire detection and fire alarm systems — Part 2: (1.8.2009) Control and indicating equipment EN 54-2:1997/AC:1999 1.1.2008 Date expired (1.1.2008) 10.6.2016 EN Official Journal of the European Union C 209/15 (1) (2) (3) (4) (5) EN 54-2:1997/A1:2006 1.1.2008 Date expired (1.8.2009) CEN EN 54-3:2001 1.4.2003 Date expired Fire detection and fire alarm systems — Part 3: (1.6.2009) Fire alarm devices — Sounders EN 54-3:2001/A1:2002 1.4.2003 Date expired (30.6.2005) EN 54-3:2001/A2:2006 1.3.2007 Date expired (1.6.2009) CEN EN 54-4:1997 1.10.2003 Date expired Fire detection and fire alarm systems — Part 4: (1.8.2009) Power supply equipment EN 54-4:1997/AC:1999 1.6.2005 Date expired (1.6.2005) EN 54-4:1997/A1:2002 1.10.2003 Date expired (1.8.2009) EN 54-4:1997/A2:2006 1.6.2007 Date expired (1.8.2009) CEN EN 54-5:2000 1.4.2003 Date expired Fire detection and fire alarm systems — Part 5: (30.6.2005) Heat detectors — Point detectors EN 54-5:2000/A1:2002 1.4.2003 Date expired (30.6.2005) CEN EN 54-7:2000 1.4.2003 Date expired Fire detection and fire alarm systems — Part 7: (1.8.2009) Smoke detectors — Point detectors using scat- tered light, transmitted light or ionization EN 54-7:2000/A1:2002 1.4.2003 Date expired (30.6.2005) EN 54-7:2000/A2:2006 1.5.2007 Date expired (1.8.2009) CEN EN 54-10:2002 1.9.2006 Date expired Fire detection and fire alarm systems — Part 10: (1.9.2008) Flame detectors — Point detectors EN 54-10:2002/A1:2005 1.9.2006 Date expired (1.9.2008) CEN EN 54-11:2001 1.9.2006 Date expired Fire detection and fire alarm systems — Part 11: (1.9.2008) Manual call points C 209/16 EN Official Journal of the European Union 10.6.2016 (1) (2) (3) (4) (5) EN 54-11:2001/A1:2005 1.9.2006 Date expired (1.9.2008) CEN EN 54-12:2015 EN 54-12:2002 8.4.2016 8.4.2017 Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical beam CEN EN 54-16:2008 1.1.2009 Date expired Fire detection and fire alarm systems — Part 16: (1.4.2011) Voice alarm control and indicating equipment CEN EN 54-17:2005 1.10.2006 Date expired Fire detection and fire alarm systems — Part 17: (1.12.2008) Short-circuit isolators EN 54-17:2005/AC:2007 1.1.2009 Date expired (1.1.2009) CEN EN 54-18:2005 1.10.2006 Date expired Fire detection and fire alarm systems — Part 18: (1.12.2008) Input/output devices EN 54-18:2005/AC:2007 1.1.2008 Date expired (1.1.2008) CEN EN 54-20:2006 1.4.2007 Date expired Fire detection and fire alarm systems — Part 20: (1.7.2009) Aspirating smoke detectors EN 54-20:2006/AC:2008 1.8.2009 Date expired (1.8.2009) CEN EN 54-21:2006 1.3.2007 Date expired Fire detection and fire alarm systems — Part 21: (1.6.2009) Alarm transmission and fault warning routing equipment CEN EN 54-23:2010 1.12.2010 Date expired Fire detection and fire alarm systems — Part 23: (31.12.2013) Fire alarm devices — Visual alarm devices CEN EN 54-24:2008 1.1.2009 Date expired Fire detection and fire alarm systems — Part 24: (1.4.2011) Components of voice alarm systems — Loud- speakers CEN EN 54-25:2008 1.1.2009 Date expired Fire detection and fire alarm systems — Part 25: (1.4.2011) Components using radio links EN 54-25:2008/AC:2012 1.7.2012 Date expired (1.7.2012) 10.6.2016 EN Official Journal of the European Union C 209/17 (1) (2) (3) (4) (5) CEN EN 179:2008 EN 179:1997 1.1.2009 Date expired Building hardware — Emergency exit devices (1.1.2010) operated by a lever handle or push pad, for use on escape routes — Requirements and test methods CEN EN 197-1:2011 EN 197-1:2000 1.7.2012 Date expired Cement — Part 1: Composition, specifications EN 197-4:2004 (1.7.2013) and conformity criteria for common cements CEN EN 295-1:2013 EN 295-10:2005 1.11.2013 Date expired Vitrified clay pipe systems for drains and sewers (1.11.2014) — Part 1: Requirements for pipes, fittings and joints CEN EN 295-4:2013 EN 295-10:2005 1.11.2013 Date expired Vitrified clay pipe systems for drains and sewers (1.11.2014) — Part 4: Requirements for adaptors, connectors and flexible couplings CEN EN 295-5:2013 EN 295-10:2005 1.11.2013 Date expired Vitrified clay pipe systems for drains and sewers (1.11.2014) — Part 5: Requirements for perforated pipes and fittings CEN EN 295-6:2013 EN 295-10:2005 1.11.2013 Date expired Vitrified clay pipes systems for drain and sewers (1.11.2014) — Part 6: Requirements for components of manholes and inspection chambers CEN EN 295-7:2013 EN 295-10:2005 1.11.2013 Date expired Vitrified clay pipe systems for drains and sewers (1.11.2014) — Part 7: Requirements for pipes and joints for pipe jacking CEN EN 331:1998 1.9.2011 Date expired Manually operated ball valves and closed bottom (1.9.2012) taper plug valves for gas installations for buildings EN 331:1998/A1:2010 1.9.2011 Date expired (1.9.2012) CEN EN 413-1:2011 EN 413-1:2004 1.2.2012 Date expired Masonry cement — Part 1: Composition, speci- (1.2.2013) fications and conformity criteria C 209/18 EN Official Journal of the European Union 10.6.2016 (1) (2) (3) (4) (5) CEN EN 416-1:2009 1.12.2009 Date expired Single burner gas-fired overhead radiant tube (1.12.2010) heaters for non-domestic use — Part 1: Safety CEN EN 438-7:2005 1.11.2005 Date expired High-pressure decorative laminates (HPL) — (1.11.2006) Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes CEN EN 442-1:2014 EN 442-1:1995 13.11.2015 13.11.2016 Radiators and convectors — Part 1: Technical specifications and requirements CEN EN 450-1:2012 EN 450-1:2005 1.5.2013 Date expired Fly ash for concrete — Part 1: Definition, +A1:2007 (1.5.2014) specifications and conformity criteria CEN EN 459-1:2010 EN 459-1:2001 1.6.2011 Date expired Building lime — Part 1: Definitions, specifica- (1.6.2012) tions and conformity criteria CEN EN 490:2011 EN 490:2004 1.8.2012 Date expired Concrete roofing tiles and fittings for roof (1.8.2012) covering and wall cladding — Product specifica- tions CEN EN 492:2012 EN 492:2004 1.7.2013 Date expired Fibre-cement slates and fittings — Product (1.7.2013) specification and test methods CEN EN 494:2012+A1:2015 EN 494:2012 8.4.2016 8.4.2017 Fibre-cement profiled sheets and fittings — Product specification and test methods CEN EN 516:2006 1.11.2006 Date expired Prefabricated accessories for roofing — Installa- (1.11.2007) tions for roof access — Walkways, treads and steps CEN EN 517:2006 1.12.2006 Date expired Prefabricated accessories for roofing — Roof (1.12.2007) safety hooks CEN EN 520:2004+A1:2009 EN 520:2004 1.6.2010 Date expired Gypsum plasterboards — Definitions, require- (1.12.2010) ments and test methods CEN EN 523:2003 1.6.2004 Date expired Steel strip sheaths for prestressing tendons — (1.6.2005) Terminology, requirements, quality control 10.6.2016 EN Official Journal of the European Union C 209/19 (1) (2) (3) (4) (5) CEN EN 534:2006+A1:2010 EN 534:2006 1.1.2011 Date expired Corrugated bitumen sheets — Product specifica- (1.1.2011) tion and test methods CEN EN 544:2011 EN 544:2005 1.4.2012 Date expired Bitumen shingles with mineral and/or synthetic (1.4.2012) reinforcements — Product specification and test methods CEN EN 572-9:2004 1.9.2005 Date expired Glass in building — Basic soda lime silicate glass (1.9.2006) products — Part 9: Evaluation of conformity/ Product standard CEN EN 588-2:2001 1.10.2002 Date expired Fibre cement pipes for drains and sewers — (1.10.2003) Part 2: Manholes and inspection chambers CEN EN 598:2007+A1:2009 EN 598:2007 1.4.2010 Date expired Ductile iron pipes, fittings, accessories and their (1.4.2011) joints for sewerage applications — Requirements and test methods CEN EN 621:2009 1.8.2010 Date expired Non-domestic gas-fired forced convection air (1.8.2011) heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combus- tion products CEN EN 671-1:2012 EN 671-1:2001 1.3.2013 Date expired Fixed firefighting systems — Hose systems — (1.7.2013)
Recommended publications
  • Lista De Referencias De Normas Armonizadas (20/12/2019)
    EUROPEAN COMMISSION Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Single Market Policy, Regulation and Implementation Standards for Growth Brussels, 20.12.2019 Summary of references of harmonised standards published in the Official Journal – Regulation (EU) No 305/20111 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC The summary below consolidates the references of harmonised standards published by the Commission in the Official Journal of the European Union (OJ). It reproduces information already published in: • Commission communication published in OJ C 092 of 9 March 2018 • Commission Implementing Decision (EU) 2019/451 of 19 March 2019 (OJ L 77, 20 March 2019) • Corrigendum to Commission Implementing Decision (EU) 2019/451 of 19 March 2019 (OJ L 318, 10 December 2019) The Commission provides this summary for information purposes only. Although it takes every possible precaution to ensure that the summary is updated regularly and is correct, errors may occur and the summary may not be complete at a certain point in time. The summary does not as such generate legal effects. This summary was generated on 20 December 2019. Beginning End of the Reference and title of the standard Reference of superseded of the ESO coexistence (and reference document) standard coexistence period period CEN EN 1:1998 01/01/2008 01/01/2009 Flued oil stoves with vaporizing burners EN 1:1998/A1:2007 01/01/2008 01/01/2009 CEN EN 40-4:2005 01/10/2006 01/10/2007 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns EN 40-4:2005/AC:2006 01/01/2007 01/01/2007 CEN EN 40-5:2002 01/02/2003 01/02/2005 Lighting columns - Part 5: Requirements for steel lighting columns 1 OJ L 88, 4.4.2011, p.
    [Show full text]
  • Product Certification
    Product Certification A comprehensive guide to BSI’s product certification services KITEMARK™ Table of contents 1 BSI Overview - NRTL service for the US and Canada in coalition with MET labs 2.15 - RADMAC - EN 442 radiators and convectors 2.16 BSI Overview 1.1 - STB Mark - certification in Belarus 2.16 What is Product Certification? 1.2 - Keymark - EU construction standards 2.16 Why choose BSI for Product Certification? 1.3 - REAS - Electrical Products to Australia & New Zealand Market 2.17 - EFSG - European Fire & Safety Group 2.17 - VCA certification - Vehicle Certification Agency 2.18 2 Product Certification Schemes and Services - NCS International 2.18 BSI Kitemark 2.2 Benchmark 2.4 3 Section 3 – EU directives CE marking 2.5 ATEX Equipment Directive (94/9/EC) | (99/92.EC) 3.1 Verification Certificate 2.7 Boiler Efficiency Directive (92/42/EEC) 3.2 Green Deal 2.9 Gas Appliances Directive (GAD - 2009/142/EC ) 3.3 GS Certification (pending) 2.10 Lift Directive (LD 95/16/EC) 3.4 Gap Analysis 2.10 Marine Directive (MED 96/98/EC) 3.5 Other Schemes BSI can offer: 2.11 - IEC Certification Schemes for Electronic Products 2.11 Low Voltage Directive (2006/95/EC) 3.6 - IEC Quality Assessment System for Electrtronic Components 2.12 Non Automatic Weighing Instruments Directive (NAWI) - CCA certification - CENELEC Certification Agreement 2.14 90/384/EEC | 93/68/EEC | SI 2000/323) 3.7 - ENEC mark - applicable for Electro technology 2.14 Personal Protective Equipment Directive (PPE 89/686/EEC) 3.8 >> ii Pressure Equipment Directive (PED 97/23/EC)
    [Show full text]
  • Snapshot of the Current Situation for Standards to Be Cited in the OJ Under the 2015-04-03 Page 1 CPR
    CEN - Construction sector Snapshot of the current situation for Standards to be cited in the OJ under the 2015-04-03 Page 1 CPR 1. Introduction The objective of the CEN Construction Sector Snapshot is to provide standardizers and users of the standards with an overview of: - the draft standards developed by CEN and ECISS Technical Committees, which will be cited in the Official Journal under Regulation 305/2011; - the amendments and revisions of harmonized product standards (hEN) already cited in the OJEU. Priority is given to the 'market' vision of the Standard. Therefore, corrigenda, amendments or revisions are not totalized separately but in a group, which progress is measured according to the global progress for the purpose. The labels used in the different sections of the snapshot can be understood as follows: Generic part of a Standard reference without date or function (for Standard: more details see the 'linked work item' description). Title: English title of the (draft) standard Gives the unique CEN Work Item identification and, if existing, the the Linked Work Item: full Standard reference Gives the last registered (date of the Snapshot) evolution in major Last realized: steps (description and internal milestone numbering) for each Work Item Gives references and dates from the registered history in the Official OJEU: Journal from the European Commission. Date of withdrawal registered in the CEN database. There may be a DOW: difference with the dates cited in the OJEU (last minute change or registration time discrepancies). Gives a list of all mandates linked to the concerned Work Item (also Man: manadates which are not specifically linked to the CPR).
    [Show full text]
  • DNVGL-ST-0145 Offshore Substations
    STANDARD DNVGL-ST-0145 Edition April 2016 Offshore substations The electronic pdf version of this document found through http://www.dnvgl.com is the officially binding version. The documents are available free of charge in PDF format. DNV GL AS FOREWORD DNV GL standards contain requirements, principles and acceptance criteria for objects, personnel, organisations and/or operations. © DNV GL AS April 2016 Any comments may be sent by e-mail to [email protected] This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of this document. CHANGES – CURRENT General This document supersedes DNV-OS-J201, November 2013. Text affected by the main changes in this edition is highlighted in red colour. However, if the changes involve a whole chapter, section or sub-section, normally only the title will be in red colour. On 12 September 2013, DNV and GL merged to form DNV GL Group. On 25 November 2013 Det Norske Veritas AS became the 100% shareholder of Germanischer Lloyd SE, the parent company of the GL Group, and on 27 November 2013 Det Norske Veritas AS, company registration number 945 748 931, changed its name to DNV GL AS. For further information, see www.dnvgl.com. Any reference in this document to “Det Norske Veritas AS”, “Det Norske Veritas”, “DNV”, “GL”, “Germanischer Lloyd SE”, “GL Group” or any other legal entity name or trading name presently owned by the DNV GL Group shall therefore also be considered a reference to “DNV GL AS”.
    [Show full text]
  • Harmoneerituks Tunnistatud Standardid
    Avaldatud 18.09.2018 Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Ilmub alates 1993. aastast SISUKORD UUED STANDARDID JA STANDARDILAADSED DOKUMENDID ......................................... 3 ASENDATUD VÕI TÜHISTATUD EESTI STANDARDID JA STANDARDILAADSED DOKUMENDID ....................................................................................................................... 15 STANDARDIKAVANDITE ARVAMUSKÜSITLUS .................................................................. 23 TÕLKED KOMMENTEERIMISEL .......................................................................................... 46 TÜHISTAMISKÜSITLUS ........................................................................................................ 47 UUED EESTIKEELSED STANDARDID JA STANDARDILAADSED DOKUMENDID ........... 48 STANDARDIPEALKIRJADE MUUTMINE .............................................................................. 50 TAASKEHTESTATUD EESTI STANDARDID ........................................................................ 51 EESTI STANDARDITE TÄHISTE MUUDATUSED ................................................................ 51 UUED STANDARDID JA STANDARDILAADSED DOKUMENDID 01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOON EVS JUHEND 4:2018 Eesti standardi ja standardilaadse dokumendi ülesehitus,
    [Show full text]
  • Fire Standards Brochure
    BSI fire testing and certification A comprehensive guide Fire standards – what BSI can certify and test Fire Brigade Equipment Fire Extinguishers – continued Specification for fire hose couplings and Specification for small disposable fire BS 336:2010 BS 6165:2002 ancillary equipment extinguishers of the aerosol type Specification for underground fire hydrants Liquid fire-extinguishing media – Part 1: BS 750:2012 and surface box frames and covers PAS 2013-1:2013 Hand-applied units for use on Class F fires (up to 3l or up to 5l cooking media) Fire hydrant systems equipment – Part 1: BS 5041-1:1987 Specification for landing valves for wet risers SANS 1910:2009 Portable refillable fire extinguishers Fire hydrant systems equipment – Part 2: Portable rechargeable fire extinguishers – BS 5041-2:1987 SANS 1567:2014 Specification for landing valves for dry risers CO2 type extinguishers Fire hydrant systems equipment – Part 3: PAS 2013-1 specifies requirements for Liquid BS 5041-3:1975 Specification for inlet breechings for dry riser PAS 2013-1:2013 Fire-Extinguishing Media – Part 1: Hand- inlets +C1:2014 applied units for use on Class F fires Specification for non-percolating layflat (up to 3L or up to 5L cooking media) BS 6391:2009 delivery hoses and hose assemblies for fire Portable fire extinguishers — Classification, AS/NZS 1850:2009 fighting rating and performance testing BS EN 14339:2005 Underground fire hydrants Portable fire extinguishers. Part 1: General AS/NZS 1841.1:2007 requirements Fire-fighting hoses — Non-percolating layflat BS EN 14540:2005 Portable fire extinguishers. Part 2: Specific hoses for fixed systems AS/NZS 1841.2:2007 requirements for water type extinguishers Fire-fighting hoses – Semi-rigid hoses for BS EN 694:2014 fixed systems Portable fire extinguishers.
    [Show full text]
  • (EU) No 305/2011 of the European Parliament and Of
    28.10.2016 EN Official Journal of the European Union C 398/7 Commission communication in the framework of the implementation of Regulation (EU) No 305 /2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 398/09) The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards. Date of applicability Date of the end of Reference and title of the standard Reference of superseded of the standard as ESO (1) the co-existence (and reference document) standard a harmonised period standard (1) (2) (3) (4) (5) CEN EN 1:1998 1.1.2008 1.1.2009 Flued oil stoves with vaporizing burners EN 1:1998/A1:2007 1.1.2008 1.1.2009 CEN EN 40-4:2005 1.10.2006 1.10.2007 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns EN 40-4:2005/AC:2006 1.1.2007 1.1.2007 CEN EN 40-5:2002 1.2.2003 1.2.2005 Lighting columns - Part 5: Requirements for steel lighting columns CEN EN 40-6:2002 1.2.2003 1.2.2005 Lighting columns - Part 6: Requirements for aluminium lighting columns CEN EN 40-7:2002 1.10.2003 1.10.2004 Lighting columns - Part 7: Requirements for fibre rein­ forced polymer composite lighting columns CEN EN 54-2:1997 1.1.2008 1.8.2009 Fire detection and fire alarm systems - Part 2: Control and indicating equipment EN 54-2:1997/AC:1999
    [Show full text]
  • BSI Assurance UK Limited
    Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK BSI Assurance UK Limited Issue No: 218 Issue date: 16 September 2021 Kitemark Court Sales Enquiry Tel: +44 (0)845 080 9000 Davy Avenue Fax: +44 (0)1908 228060 Knowlhill Sales Enquiry Email: [email protected] 0003 Milton Keynes BSI Website: www.bsigroup.com Accredited to MK5 8PP Regulatory Contact: Maria Crane ISO/IEC 17065:2012 to provide product Tel: +44 (0)1908 814724 conformity certification Email: [email protected] Locations where certification activities covered by the above Accreditation Standard are undertaken Kitemark Court Kitemark House Davy Avenue Maylands Avenue Knowlhill Hemel Hempstead Milton Keynes Hertfordshire MK5 8PP HP2 4SQ UNITED KINGDOM UNITED KINGDOM Holywell Park Room 1006-1011,10/F Ashby Road Ciro’s Plaza Loughborough 388 Nanjing W. RD Leicestershire Shanghai 200003 LE11 3AQ PR CHINA UNITED KINGDOM Say Building Suite 208 John M. Keynesplein 9, 4th floor Sultan Business Centre 1066 EP PO Box 49400 Amsterdam Dubai NETHERLANDS UNITED ARAB EMIRATES 210 Amarande Avenue Regus Business Park Menlyn Maine Waterkloof Ext 2 0181 SOUTH AFRICA Flexible Scope This Certification Body is additionally accredited to develop and add additional product standards within the highlighted product areas, having demonstrated competence in their design and development process for these areas. Assessment Manager: WC1 Page 1 of 120 Schedule of Accreditation issued by United Kingdom
    [Show full text]
  • Standards Published in 2011
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 152-2:1988/AC1:1989 Date published 11 APRIL 2011 Test methods for wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Part 2 : Application by methods other than brushing. 2. S.R. CR 1350:1993 Date published 21 SEPTEMBER 2011 Investigation of Syntaxes for Existing Interchange Formats to be Used in Healthcare 3. S.R. CR 1460:1994 Date published 21 SEPTEMBER 2011 Packaging – Energy Recovery from Used Packaging 4. S.R. CR 12161:1995 Date published 24 SEPTEMBER 2011 A method for defining profiles for healthcare 5. S.R. CR 12340:1996 Date published 21 SEPTEMBER 2011 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems 6. S.R. CR 1901:1995 Date published 21 SEPTEMBER 2011 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete 7. S.R. CR 12776:1997 Date published 21 SEPTEMBER 2011 Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials 8. S.R. CR 12793:1997 Date published 21 SEPTEMBER 2011 Measurement of the carbonation depth of hardened concrete 9. S.R. CR 12804:1997 Date published 21 SEPTEMBER 2011 Conceptual Model and Taxonomy for Information Systems Engineering 10. S.R. CR 12894:1997 Date published 21 SEPTEMBER 2011 Biotechnology - Microorganisms - Examination of the various existing lists of animal pathogens and production of a report 11. S.R. CR 13156:1998 Date published 21 SEPTEMBER 2011 Some occupational profiles for practitioners in logistics 12.
    [Show full text]
  • Official Journal of the European Union C 378/1
    Official Journal C 378 of the European Union Volume 58 English edition Information and Notices 13 November 2015 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2015/C 378/01 Commission communication in the framework of the implementation of Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 1 2015/C 378/02 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/ 2011) (1) . 4 2015/C 378/03 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 6 EN (1) Text with EEA relevance 13.11.2015 EN Official Journal of the European Union C 378/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication
    [Show full text]
  • Standards Published in 2009
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 10020:1991 Date published 8 SEPTEMBER 2009 Definition and Classification of Grades of Steel 2. I.S. EN 54-4:1998/AC:1999 Date published 1 JANUARY 2009 Fire detection and fire alarm systems - Part 4: Power supply equipment 3. I.S. EN 50171:2001/AC:2001 Date published 1 JANUARY 2009 Central power supply systems 4. I.S. EN 61800-3:1996/A11:2000/AC:2001 Date published 1 JANUARY 2009 Adjustable speed electrical power drive systems -- Part 3: EMC product standard including specific test methods 5. I.S. EN 60335-2-24:1999/AC:2001 Date published 1 JANUARY 2009 Safety of household and similar electrical appliances -- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers (IEC 60335-2-24:1997 (EQV) + A1:1998 (EQV)) 6. I.S. EN 60079-1:2004/AC:2004 Date published 1 JANUARY 2009 Electrical apparatus for explosive gas atmospheres -- Part 1: Flameproof enclosures 'd' (IEC 60079-1:2003 (EQV)) 7. I.S. EN 60297-5-102:2001/AC:2001 Date published 1 JANUARY 2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-102: Subracks and associated plug-in units - Electromagnetic shielding provision (IEC 60297-5-102:2001 (EQV)) 8. I.S. EN 61834-10:2001/AC:2001 Date published 1 JANUARY 2009 Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 10: DTV format (IEC 61834-10:2001 (EQV)) 9.
    [Show full text]
  • Official Journal of the European Union C 267/1
    Official Journal C 267 of the European Union Volume 60 English edition Information and Notices 11 August 2017 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2017/C 267/01 Commission communication in the framework of the implementation of Commission Delegated Regulation (EU) No 65/2014 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods and of Commission Regulation (EU) No 66/2014 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for domestic ovens, hobs and range hoods (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 1 2017/C 267/02 Commission communication in the framework of the implementation of Commission Delegated Regulation (EU) No 665/2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of vacuum cleaners and of Commission Regulation (EU) No 666/2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for vacuum cleaners (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 4 2017/C 267/03 Commission communication in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (Publication of titles and references of European standards under the directive) (1) . 7 2017/C 267/04 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) .
    [Show full text]