Simply better.

Ideal clamping tools for woodworking

(April 2021) Malleable cast iron screw clamps The Original is the best

Original BESSEY malleable cast iron screw clamp TG with 2-component plastic handle Q Clamping force up to 6,000 N Throat Order-No. Opening Rail Q High-quality 2-component plastic handle depth Q Pressure plates can be replace by hand mm mm mm kg qty. V1 – no tools required (from 80 mm throat TG10-2K 100 50 15 x 5 0.26 10 depth) TG12-2K 120 60 20 x 5 0.42 10 TG16-2K 160 80 25 x 6 0.66 10 Q With protective caps on the clamping TG20B8-2K 200 80 25 x 6 0.77 10 surfaces TG25B8-2K 250 80 25 x 6 0.82 10 Q Stable profiled rail with serration TG30B8-2K 300 80 25 x 6 0.87 10 Q BESSEY anti-slip system (from 80 mm TG40B8-2K 400 80 25 x 6 0.97 10 throat depth) TG20-2K 200 100 27 x 7 1.06 10 TG25S10-2K 250 100 27 x 7 1.15 10 TG30S10-2K 300 100 27 x 7 1.18 10 TG40S10-2K 400 100 27 x 7 1.33 10 TG50S10-2K 500 100 27 x 7 1.46 10 TG25-2K 250 120 29 x 9 1.54 10 TG30S12-2K 300 120 29 x 9 1.63 10 TG40S12-2K 400 120 29 x 9 1.78 10 TG50S12-2K 500 120 29 x 9 1.98 10 TG60S12-2K 600 120 29 x 9 2.13 5 TG80S12-2K 800 120 29 x 9 2.46 5 TG100S12-2K 1000 120 29 x 9 2.83 5 TG30-2K 300 140 32 x 10 2.20 10 TG40S14-2K 400 140 32 x 10 2.41 5 TG50S14-2K 500 140 32 x 10 2.62 5 TG60S14-2K 600 140 32 x 10 2.85 5 TG80S14-2K 800 140 32 x 10 3.29 5 TG100S14-2K 1000 140 32 x 10 3.71 5 TG40-2K 400 175 32 x 10 2.70 5 TG50S17-2K 500 175 32 x 10 2.90 1 TG60S17-2K 600 175 32 x 10 3.16 1 TG80S17-2K 800 175 32 x 10 3.50 1 TG100S17-2K 1000 175 32 x 10 4.00 1

Heavy duty malleable cast iron screw clamp TGK with 2-component plastic handle Q Clamping force up to 7,000 N Throat Order-No. Opening Rail Q Strengthened design for higher clamping depth force and wider opening widths mm mm mm kg qty. V1 Q High-quality 2-component plastic handle TGK40-2K 400 120 35 x 11 2.52 5 TGK50-2K 500 120 35 x 11 2.70 5 Q Pressure plates can be replaced by hand TGK60-2K 600 120 35 x 11 3.00 5 – no tools required TGK80-2K 800 120 35 x 11 3.53 5 Q Stable profiled rail with serration TGK100-2K 1000 120 35 x 11 4.00 5 Q BESSEY anti-slip system TGK125-2K 1250 120 35 x 11 4.48 1 TGK150-2K 1500 120 35 x 11 5.31 1 TGK200-2K 2000 120 35 x 11 6.66 1 2 TGK250-2K 2500 120 35 x 11 7.93 1 TGK300-2K 3000 120 35 x 11 9.20 1 Malleable cast iron screw clamps Range summary Simply better.

Anti-slip system, stable profiled rail – Stable profiled rail – clamping force up to 6,000 N clamping force up to 5,500 N

Screw clamp with Screw clamp with Screw clamp with Screw clamp with Screw clamp with 2K plastic handle TG-2K wooden handle TG tommy bar TG-K 2K plastic handle TPN-BE-2K wooden handle TPN-BE

Anti-slip system, stable profiled rail – Stable profiled rail – clamping force up to 7,000 N clamping force up to 6,500 N

Detailed information about all Heavy duty screw clamp with Heavy duty screw clamp with Heavy duty screw clamp with Heavy duty screw clamp with malleable cast iron 2K plastic handle TGK-2K wooden handle TGK tommy bar TGK-K wooden handle TKPN-BE screw clamps at www.bessey.de

Solid flat rail – Heavy duty design, solid flat rail– clamping force up to 5,500 N clamping force up to 7,000 N

Screw clamp with Heavy duty screw clamp with Deep throat screw clamp with Deep throat screw clamp with wooden handle TGRC wooden handle TGKR wooden handle TGNT tommy bar TGNT-K

3 All-steel screw clamps BESSEY’s unrivalled all-steel quality

Original BESSEY all-steel screw clamp GZ with 2-component plastic handle Q 20 % more clamping force per spindle Throat Order-No. Opening Rail rotation with optimised rail profile depth Q Maximum security with linear transfer mm mm mm kg qty. V2 of force at the sliding arm GZ10-2K 100 60 15 x 6 0.31 10 Q Clamping force up to 6,000 N GZ12-2K 120 60 15 x 6 0.32 10 Q Fixed jaw and sliding arm are GZ16-2K 160 80 17.5 x 6.8 0.57 10 constructed of tempered steel for GZ40-8-2K 400 80 17.5 x 6.8 0.76 10 resilient clamping GZ20-2K 200 100 22 x 8,5 1.01 10 Q High-quality 2-component plastic GZ25-2K 250 120 24.5 x 9.5 1.38 10 handle GZ30-12-2K 300 120 24.5 x 9.5 1.46 10 Q Pressure plates can be replaced by GZ40-12-2K 400 120 24.5 x 9.5 1.62 10 hand – no need for tools (from 80 mm GZ50-12-2K 500 120 24.5 x 9.5 1.78 10 width) GZ60-12-2K 600 120 24.5 x 9.5 1.95 5 GZ80-12-2K 800 120 24.5 x 9.5 2.20 5 GZ100-12-2K 1000 120 24.5 x 9.5 2.45 5 GZ30-2K 300 140 28 x 11 1.98 10 GZ40-2K 400 120 28 x 11 2.12 10 GZ50-2K 500 120 28 x 11 2.30 5 GZ60-2K 600 120 28 x 11 2.49 5 GZ80-2K 800 120 28 x 11 2.36 5 GZ100-2K 1000 120 28 x 11 3.25 5 GZ125-2K 1250 120 28 x 11 3.79 1

Lever clamp GH

Q Greater reserves of power, thanks to Throat Order-No. Opening Rail optimised rail profile, for even clamping depth force build-up, especially under maximum mm mm mm kg qty. V2 utilisation of the clamping range GH12 120 60 15 x 6 0.49 10 Q Non-slip trigger release GH16 160 80 17.5 x 6.8 0.64 10 Q Sintered steel cams – particularly GH20-8 200 80 17.5 x 6.8 0.68 10 hard-wearing, low friction due to higher GH20 200 100 22 x 8.5 1.11 10 surface hardness GH25 250 120 24.5 x 9.5 1.44 10 GH30-12 300 120 24.5 x 9.5 1.51 10 Q Quick – up to 5 x faster than regular GH40-12 400 120 24.5 x 9.5 1.67 10 clamps GH30 300 140 28 x 11 2.22 10 Q Secure – vibration resistant GH40 400 120 28 x 11 2.39 10 Q Strong – clamping force up to 8,500 N GH50 500 120 28 x 11 2.61 5 GH60 600 120 28 x 11 2.78 5 GH80 800 120 28 x 11 3.14 5 GH100 1000 120 28 x 11 3.57 5

4 All-steel screw clamps Range summary Simply better.

Optimised rail profile – clamping force up to 6,000 N NEW

Detailed information about all all-steel screw clamps at www.bessey.de

All-steel screw clamp with All-steel screw clamp with All-steel screw clamp with All-steel screw clamp with 2K plastic handle GZ-2K wooden handle GZ tommy bar GZ-K swivel handle GZ-KG

Tried-and-true rail profile – clamping force up to 5,000 N Patented OMEGA bend – clamping force up to 5,000 N

All-steel screw clamp with All-steel screw clamp with OMEGA screw clamp with OMEGA screw clamp with wooden handle classiX GS tommy bar classiX GS-K 2K plastic handle GMZ-2K tommy bar GMZ-K

Rapid, secure and strong – clamping force up to 9,500 N

Lever clamp with Lever clamp GH Lever clamp classiX GSH reversed clamping lever SGHS

5 Parallel clamps Large-area clamping and spreading

Precise and gentle Workpieces with sensitive surfaces can be clamped and spread exactly parallel to each other – even behind and on the side of the rail. Corners and recessed edges as well as pointed and round surfaces can also be perfectly aligned: Q due to extremely large clamping surfaces that are attached perpendicular to the rail Q due to three removable pressure caps that are Powerful and safe repellent to glue, and also resistant to paint and grease solvents They securely clamp with a clamping force of up to 8,000 N: Q due to workpiece supports that prevent the workpiece from coming into contact Q due to the metal-reinforced plastic with the rail housing Q due to the optimised sliding arm with double slide protection: It holds the clamp reliably with the set clamping force and prevents any unintentional slipping of the sliding arm in the unclamped condition

YouTube

Versatile and well thought out The clamps provide an enormous number of possible applications: Q due to ingenious accessories, such as tilting adapter, frame press set, clamp extension and table clamp Q the ergonomically formed 2-component symmetrical plastic handle with hexagon socket means the clamping force can be comfortably applied (max. torque 17 Nm) Q the continuously adjustable head for the KREV Vario version enables the clamp to be positioned in the middle of the workpiece for optimum weight distribution 6 Simply better.

K Body REVO parallel clamp KRE and Vario K Body REVO parallel clamp KREV Q Clamping force up to 8,000 N Order-No. Q Very large parallel clamping surfaces mm mm mm mm kg qty. V3 with 3 removable pressure caps KRE30-2K 300 95 255-390 29 x 9 2.15 2 Q Metal-reinforced plastic housing and optimised sliding arm with double slide KRE60-2K 600 95 255-730 29 x 9 2.76 2 protection for more power and safety: KRE80-2K 800 95 255-930 29 x 9 3.10 2 The set clamping force is maintained and KRE100-2K 1000 95 255-1130 29 x 9 3.45 2 the sliding arm cannot unintentionally KRE125-2K 1250 95 255-1355 29 x 9 3.87 2 slip in the unclamped condition KRE150-2K 1500 95 255-1610 29 x 9 4.28 2 Q Can be converted without tools for KRE200-2K 2000 95 255-2080 29 x 9 5.09 2 spreading tasks KRE250-2K 2500 95 255-2580 29 x 9 6.05 2 Q High-quality 2-component symmetrical KREV100-2K 1000 95 260-1130 29 x 9 3.77 2 plastic handle with hexagon socket for KREV150-2K 1500 95 260-1610 29 x 9 4.25 2 the comfortable application of the clam- ping force (max. torque 17 Nm) KREV200-2K 2000 95 260-2080 29 x 9 5.30 2 Q KREV with continuously adjustable KREV250-2K 2500 95 260-2580 29 x 9 6.30 2 and fixable upper section for optimum positioning on the workpiece

Accessories

KRE-VO: Order-No. Suitable for Q Steplessly adjustable and fixable upper kg qty. V3 section KRE-VO suitable for all BESSEY K body REVO KRE / KREV and KR / KRV Variable jaw KRE-VO KR-AS: Q Adapter with tilting clamping jaws with a KRE-VO KRE / KREV / KR / KRV 1.58 1 tilt range of -15° to +15° Q Clamping on sloping and parallel surfaces Tilting K Body clamp adapter KR-AS (Contents: 2 pcs./bag) KP: Q KP Framing System (from 30 cm to KR-AS KRE / KREV / KR / KRV 0.18 12 250 cm/12“–98“) with four 90° KP Blocks Q Separately adjustable clamping force Framing set KP with 2 inserted clamps per corner (Contents: 4 rail couplings and 4 adapters) Q Lightweight / easy to assemble

KP KRE / KREV / KR / KRV 0.55 12 KBX20: Q Connect any two K Body parallel clamps K Body parallel clamp extender KBX to increase the clamping capacity. The connector is made of robust aluminum

KBX20 KRE / KREV / KR / KRV 0.75 12 TK6: Q Especially for DIY applications and Table clamp TK6 domestic appliances Q Special accessory for angle clamps WS 3/WS 6, screw clamp S 10 and TK6 KRE / KREV / KR / KRV 0.10 10 K Body REVO parallel clamps KRE/KREV and KR/KRV to hold them to a work surface edge

7 One-handed clamps One-handed clamping (and spreading)

One-handed clamp EHZ with 2-component handle Q Clamping force of up to 3,500 N Throat Order-No. Opening Rail Q Clamp and fix in place quickly and depth simply with just one hand mm mm mm kg qty. V2 Q With protection caps on the clamping EHZ30-2K 300 100 19.5 x 9.5 1.25 6 surfaces EHZ60-2K 600 100 19.5 x 9.5 1.67 6

One-handed clamp EZS

Q Clamping force up to 2,000 N Throat Spreading Order-No. Opening Rail Q No tools required for spreading thanks depth width “e” to intelligent release mechanism in mm mm mm mm kg qty. V3 upper section EZS15-8 150 80 170-360 19 x 6 0.72 6 Q Ergonomically shaped 2-component EZS30-8 300 80 170-510 19 x 6 0.83 6 plastic handle behind the rail EZS45-8 450 80 170-660 19 x 6 0.93 6 Q One-handed operation with little EZS60-8 600 80 170-810 19 x 6 1.04 6 effort required EZS90-8 900 80 170-1110 19 x 6 1.26 6

2.000 N 200 kg

One-handed clamp DuoKlamp DUO

Q Clamping force up to 1,200 N Throat Spreading Spreading Order-No. Opening Rail Q Change from clamping to spreading depth width “e” width “f” by switching, not converting mm mm mm mm mm kg qty. V3 Q Handle with pump lever parallel to the rail DUO16-8 160 85 75-235 9-170 20 x 5 0.66 6 Q Convenient one-handed operation, with DUO30-8 300 85 75-380 9-315 20 x 5 0.72 6 little effort required DUO45-8 450 85 75-535 9-470 20 x 5 0.83 6 Q All-round clamping – in front of, behind DUO65-8 650 85 75-685 9-660 20 x 5 1.02 6 and at the side of the rail

8 Simply better.

Multiple applications The one-handed EZ range offers 2.700 N numerous possible applications: 270 kg Q due to a diverse range in four sizes EZS11-4 with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N EZM Q due to the cross prism integrated in the 20 kg plastic protective caps for the secure 75 kg fastening of round, pointed and angular pieces EZL Q due to conversion of the top section from EZXL clamping to spreading – with sizes EZM, EZL and EZXL tool-free thanks 140 kg 270 kg to release mechanism at the touch of a button Practical convenience The entire range offers ergonomic Robust design handling, thanks to sophisticated Modern aesthetics meet with technology: longevity here: Q due to the high quality 2-component Q due to the use of high-quality materials, plastic handle with pump lever behind such as fibreglass-reinforced polyamide the rail for safe access from both for the top and bottom, as well as directions hardened, tempered, and burnished Q due to the release handle integrated steel for the profiled rails in the grip for quick adjustment of the Q due to the plastic housing, the grip sliding bar and for releasing the clamp mechanism is protected from dust and chips

NEW One-handed clamp EZ

Throat Spreading Contents Order-No. Opening Rail depth width “e” /pc. mm mm mm mm kg qty. V3 2 x EZS11-4SET 110 40 80-190 7 x 2.5 0.12 10 EZS11-4 EZM15-6 150 60 125-270 14 x 5 - 0.31 6 EZM30-6 300 60 125-420 14 x 5 - 0.38 6 EZL15-8 150 80 160-300 18 x 5 - 0.58 6 Q Clamping force up to 2,700 N EZL30-8 300 80 160-450 18 x 5 - 0.68 6 Q Conversion for spreading – tool-free EZL45-8 450 80 160-500 18 x 5 - 0.77 6 with EZM, EZL, EZXL thanks to simple EZL60-8 600 80 160-750 18 x 5 - 0.86 6 release mechanism at the touch of a EZXL30-9 300 90 195-490 22 x 8 - 1.24 6 button on the top section EZXL60-9 600 90 195-790 22 x 8 - 1.57 6 Q Ergonomically shaped 2-component EZXL90-9 900 90 195-1090 22 x 8 - 1.90 6 plastic handle with pump mechanism and integrated release lever behind the rail Q Protective caps with cross prism on the top for securely holding round, pointed and angular parts Q One-handed operation with little effort required

9 Gearclamp Clamp comfortably in the tightest spaces

Unique compact design

The GearKlamp is extremely flexible and can even Ergonomic use be used in the tightest of spatial conditions: The clamp contains all kinds of clamping Q due to the patented mechanism that separates the technology and guarantees the user greater handle from the spindle and positions it around the rail comfort: Q due to the crossed v-grooves on the upper section for Q due to the high-quality two-component securely holding round, pointed and angular components plastic handle for safe handling Q due to the quick-release shift button for quickly adjusting the sliding bar Q due to the swivelling pressure plate for exact alignment of the workpiece

YouTube

Robust technology Meeting the BESSEY quality promise was a focus in development, and so the transmission clamp is also a winning choice in terms of durability: Q due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered and burnished steel for the profiled rails Q due to the sliding bar’s plastic housing, the driving mechanism is protected from dust and splintering

GearKlamp GK

Q High-quality two-component plastic Throat Order-No. Opening Rail handle positioned around the rail, so depth clamp can be used in tight spaces mm mm mm kg qty. V3 Q Clamping force up to 2,000 N GK15 150 60 19 x 6 0.62 6 Q Easy-to-move trapezoidal thread GK30 300 60 19 x 6 0.73 6 spindle with swivelling pressure plate GK45 450 60 19 x 6 0.84 6 Q Quick-release shift button to quickly GK60 600 60 19 x 6 0.95 6 adjust sliding bar

10 Band clamps / Angle clamps / Edge clamps Clamp curves, angles and edges Simply better.

Band clamp BAN700

Clamping Band Angle Q Even pressure on mitre joints Order-No. range w x d range Q Crank handle can be relocated for right mm kg qty. V3 and left-handed users BAN700 Up to 7 m 25 x 1 60°-180° 0.56 5 Q Contains: 1 band clamp, 4 Vario corners

Angle clamp WS

Jaw Current Q Automatic adjustment to Order-No. Opening passage height “m” variouslysized workpieces mm mm mm kg qty. V3 Q Quick – clamp with a spindle WS3 2 x 55 30 30 0.96 10 Q Stable body WS6 2 x 100 36 60 1.96 4 Q For attaching with table clamp –

m available as an accessory

One-handed edge clamp EKT

Q For rapid one-handed operation Order-No. Opening Throat depth Q Low weight mm mm kg qty. V3 Q Opening up to 55 mm EKT55 10-55 45 0.82 1

Edge clamp Kantenfix KF

Q For quick one-handed operation Order-No. Opening Throat depth Q Widths up to 80 mm mm mm kg qty. V3 KF2 10-40 80 0.68 4 KF4 10-80 110 1.48 4 YouTube

11 Lightweight lever clamp Clamp quickly with ease

Your benefits at a glance: 1 1 Sturdy magnesium 3 The surface-coated upper and lower sections made from sturdy magnesium are extremely 3 light and strong. 2 Multi-stage ratchet mechanism 1 The multi-stage ratchet mechanism is easy to operate, vibration-resistant, particularly easy to control, and can be released quickly. 3 A secure hold The fixed arm with the crossed v-grooves 2 holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. That’s quality of the highest calibre.

4

High-tech lever clamp KliKlamp KLI

Q Clamping force up to 1,200 N Throat Order-No. Opening Rail Q Feather light yet ultra strong depth Q Sturdy fixed and sliding arms made mm mm mm kg qty. V3 from lightweight magnesium KLI12 120 80 20 x 5 0.26 6 Q Quick and vibration free clamping KLI16 160 80 20 x 5 0.29 6 KLI20 200 80 20 x 5 0.32 6 KLI25 250 80 20 x 5 0.35 6 KLI30 300 80 20 x 5 0.38 6 KLI40 400 80 20 x 5 0.45 10

High-tech lever clamp KliKlamp set in systainer KLI-S

Q Practical systainer T-Loc, stackable Order-No. Contents/pc. Q Ideal for assembly work kg qty. V3 per 4 x KLI12 / KLI 16 / KLI-S 6.44 1 KLI20 / KLI25

12 Spring clamps Clamp flexible and featherlight Simply better.

Spring clamp VarioClippix XV

Q Variable opening width up to 170 mm, Order-No. Opening Throat depth yet can be operated with one hand XV3-50 / XV5-100 mm " mm " kg qty. V3 Q Lightweight, functional and easy to handle XV3-50 55 2 37 1 1/2 0.07 12 Q Extremely sturdy XV5-100 100 4 50 2 0.17 12 XV5-170 XV5-170 170 6 1/2 50 2 0.19 12

Spring clamp Clippix XC

Contents/ Q Lightweight, functional and easy to handle Order-No. Opening Throat depth pc. Q Extremely sturdy XC1/2 mm " mm " kg qty. V3 XC1 20 3/4 20 3/4 - 0.01 10 XC3/5/7 XC1-SET 20 3/4 20 3/4 7 x XC1 0.06 12 XC2 25 1 30 1 1/8 - 0.02 10 XC3 35 1 3/8 37 1 1/2 - 0.05 10 XC5 50 2 50 2 - 0.12 10 XC7 75 2 3/4 70 2 3/4 - 0.18 10

Needle nose spring clamp Clippix XCL

Contents/ Q Long, pointed clamping arm for working Order-No. Opening Throat depth pc. in tight spaces mm " mm " kg qty. V3 Q Large throat depth for clamping XCL2 55 2 1/8 60 2 3/8 - 0.02 10 in borderless areas XCL2-SET 55 2 1/8 60 2 3/8 2 x XCL2 0.04 10 Q Soft, slip-proof grip pads XCL5 70 3 110 4 1/4 - 0.14 10

NEW Spring clamp XM

Q XM3EU: Clamping force up to 100 N/10 kg Order-No. Opening Throat depth Q XM5EU: Clamping force up to 120 N/12 kg mm " mm " kg qty. V3 Q XM7EU: Clamping force up to 150 N/15 kg XM3EU 25 1 32 1 1/4 0.07 48 Q Tips and handles made of PVC XM5EU 50 2 57 2 1/4 0.17 24 prevent marring XM7EU 75 3 85 3 5/16 0.42 10 Q Heavy duty springs for firm grip and powerful clamping Q Corrosion resistant nickel plated

13 Table clamps Clamp in profiles and on tables

Versatile use This clamp offers numerous possible applications: Q with adapter EZR on the bottom section and rotated top section for secure fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi/Hikoki, Dewalt, etc. and for clamping in profiles and on work benches Q with adapter on the top or bottom section for step-over clamping Q with or without adapter for clamping or spreading

YouTube

Robust design Modern aesthetics meet Convenient technology with longevity here: Q due to the use of high-quality materials, Ergonomic and safe handling, thanks to sophisticated technology: such as fibreglass-reinforced polyamide Q due to the high quality 2-part plastic grip with pump lever for the top and bottom, as well as behind the rail for safe access from both directions hardened, tempered, and burnished Q due to the release handle integrated in the grip steel for the profiled rails for quick adjustment of the sliding bar Q due to the plastic housing, the grip and for releasing the clamp mechanism is protected from dust and chips Q due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces

14 Simply better.

NEW One-handed table clamp EZR

Ope- Throat Spreading Content/ Q With special guide on the top section Order-No. Rail ning depth width pc. for grooves 12 x 6.5 mm to 12 x 8 mm mm mm mm mm kg qty. V3 Q Use with adapter on the bottom section 2 x and rotated top section for secure EZR15-6SET 150 60 120-310 14 x 5 0.88 8 EZR15-6 fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi/Hikoki, Dewalt, etc. and for clamping in profiles and on work benches Q Use with adapter on the top or bottom section for step-over clamping Q Use with or without adapter – for clamping or spreading 11,8 Q Clamping force up to 750 N Q Ergonomically shaped 2-part plastic

5 handle with pump lever behind the rail 4,6

6,4

All-steel table clamp GTR

Throat Contents/ Q Specially forged fixed arm for Order-No. Opening Rail depth pc. 12 x 8 mm grooves mm mm mm kg qty. V2 Q For secure fastening of guide rails GTR12 120 60 13.5 x 6.5 - 0.30 10 from Festool, Protool, Metabo, Makita, GTR12SET 120 60 13.5 x 6.5 2 x GTR12 0.61 5 Hitachi/Hikoki, etc. and for clamping in GTR16B6 160 60 13.5 x 6.5 - 0.32 10 profiles as well as work tables GTR30B6 300 60 13.5 x 6.5 - 0.40 10 GTR: Q Clamping force up to 1,800 N Q Ergonomically shaped wooden handle All-steel table clamp GTRH with lever handle GTRH: Throat Q Rapid – up to 5 times faster than Order-No. Opening Rail depth conventional clamps mm mm mm kg qty. V2 Q Secure – unaffected by vibrations GTR16S6H 160 60 13.5 x 6.5 0.53 10 Q Strong – clamping force up to 2,400 N 11,5 6,1

7,8 1,6

15 Self-adjusting toggle clamps Self-adjusting jaw height for rapid clamping

Ready to go – the first time and for quick Uncompromisingly versatile set-up during workpiece changes One size of the BESSEY BESSEY STC toggle clamps adapt to toggle clamp replaces workpieces of varying thickness – without multiple competitor sizes manual setting of the spindle and, with simultaneously: practically the same clamping force: Q due to an extremely large clamping range, Q due to an automatic clamping width range thanks to the patented mechanism

Powerful and gentle Even sensitive workpieces, e.g. with veneered or varnished surfaces, can be gently clamped: Q due to moving pressure plate with removable protective cap Q due to clamping force regulation via adjustment screw in the joint

Clamping up to 5 x faster Self-adjusting toggle clamps STC

Q Automatic, seamless adjustment of STC-HH Automatic Clamping Order-No. Opening the clamping height up to 35 mm with adjustment force almost constant clamping force – without mm mm appr. N kg qty. V3 manual changing of the pressing screw STC-IHH Horizontal toggle clamp with horizontal base plate STC-HH position Q Adjustable clamping force based on the STC-HH20 35 20 1,100 0.20 6 adjusting screw in the joint STC-HH50 40 35 2,500 0.38 6 Q Sturdy, tempered sheet steel for longer STC-VH STC-HH70 60 35 2,500 0.42 6 service life Push/pull clamp with horizontal base plate STC-IHH STC-IHH15 25 8 1,100 0.19 6 STC-IHH25 35 13 2,500 0.45 6 YouTube Vertical toggle clamp with horizontal base plate STC-VH STC-VH20 35 20 1,100 0.22 6 STC-VH50 40 35 2,500 0.43 6

3D CAD data for download at http://bessey.partcommunity.com 16 and www.bessey.de Clamping elements for multifunction tables Clamp quickly on mobile tables Simply better.

NEW Clamping element for multifuncion tables TW-KLI

Throat Q Clamping force up to 500 N Order-No. Ø Opening Rail depth Q Use on multifunctional tables with a mm mm mm mm kg qty. V3 20-hole system TW20-15-8-KLI 20 150 80 20 x 5 0.30 1 Q Stable sliding arm made of light magnesium for rapid, vibration-proof clamping Q Profile made of cold-drawn quality steel for flexible and elastic clamping

STC accessory set and adapter for multifunction tables

Clam- Automatic Q For using the BESSEY toggle clamps on Order-No. Contents/pc. Opening adjustment ping force multifunction tables such as Festool mm mm N kg qty. V3 MFT and Sortimo WorkMo with hole 1 x STC-HH50 diameter of 20 mm and plate thickness STC-HH50-T20 + 40 35 2,500 0.47 6 of min. 19 mm to max. 25 mm 1 x STC-SET-T20 1 x STC-HH70 STC-HH70-T20 + 60 35 2,500 0.51 6 1 x STC-SET-T20 1 x STC-IHH25 STC-IHH25-T20 + 35 13 2,500 0.54 6 1 x STC-SET-T20 1 x STC-VH50 STC-VH50-T20 + 40 35 2,500 0.52 6 1 x STC-SET-T20

Order-No. Contents/pc. Suitable for

kg qty. V3

1 x Cylindrical screw STC-HH50 DIN 912 M 8 x 35 STC-HH70 STC-SET-T20 1 x Lock pin 0.09 6 D 20 x 17 STC-IHH25 1 x Knurled nut M 8 STC-VH50

Toggle clamp systainer STC-S-MFT

Q Multi-functional systainer for installation Order-No. Contents/pc. technicians kg qty. V3 Q With wood insert including 20 holes 4 x horizontal toggle clamp Q And 3 different clamping options STC-HH50 2 x push-pull toggle clamp STC-S-MFT 5.71 1 STC-IHH25 6 x adapter STC-SET-T20 2 x all-steel table clamp GTR12 17 Clamping elements for workbenches Clamp on workbenches securely and variably

Easily and quickly to use Precise and safe BESSEY clamping elements of the TWV16 BESSEY always offers the right clamping and TW16 series can be used with just a element for different requirements: few turns on all standard workbenches: Q due to 2 throat depth variants: Q due to the con nection of the either with infinitely adjustable (TWV) TW16AW workbench adapter – or fixed throat depth (TW) available in 5 sizes suitable for Q due to 3 handle variations: the 19 mm, 20 mm, 22 mm, 25.4 mm 2-component plastic handle and tommy and 30 mm hole diameter bar – each with smooth-running trape- Q due to replaceable bolts on the adapter zoidal threaded spindle and tool-free for the use of further hole systems pressure plate replacement – and lever handle with an indexing mechanism for controlled, fast and vibration-free clamping

Robust and highly hard-wearing The tried-and-tested BESSEY all-steel clamp solutions were the inspiration for the development of the clamping elements and guarantee a form-stable and torsion-free tool: Q due to the unique BESSEY steel quality, which is available in the optimized profile shape as well as the easy-going spindle Q due to the particularly hard-wearing steel cams at the lever handle

18 3D CAD data for download at www.bessey.de Simply better.

Workbench adapter TW16AW

Q Accessories for BESSEY TWV and TW Order-No. Suitable for clamping elements with 16 hole system mm mm " kg qty. V3 Q Suitable for all common workbenches TW16AW19 16 19 3/4 0.33 1 with a hole system Ø 16 TW16AW20 16 20 13/16 0.34 1 Q Can be used without tools TW16AW22** 16 22 7/8 0.35 1 Q The stud pin can be changed to use TW16AW25** 16 25,4 1 0.44 1 other hole systems TW16AW30 16 30 1 3/16 0.52 1 ** TW16AW22 / TW16AW25: While stocks last 60

Ø 19 – 30 mm Ø 3/4 – 1 3/16"

Clamping element with variable throat depth TWV

Clamping Throat Q Precise, individual clamping Order-No. height Rail max. depth Q Tempered profile and sliding arm for sprung mm mm mm mm kg qty. V3 and elastic clamping TWV16-20-15-2K 16 200 30-150 22 x 8.5 1.12 1 Q Infinitely adjustable throat depth (TWV) TWV16-20-15K 16 200 30-150 22 x 8.5 1.04 1 TWV16-20-15H 16 200 60-150 22 x 8.5 1.21 1 Various design versions:

Q High quality 2-component plastic handle and tommy bar with rounded ends – each with smooth-running trapezoidal threa- ded spindle and tool-free pressure plate replacement Q Lever handle with an indexing mechanism for controlled, fast and vibrationproof Clamping element with fixed throat depth TW clamping

Clamping Throat Order-No. height Rail max. depth mm mm mm mm kg qty. V3 TW16-20-10-2K 16 200 100 22 x 8.5 0.93 1 TW16-20-10K 16 200 100 22 x 8.5 0.86 1 TW16-20-10H 16 200 100 22 x 8.5 1.01 1

19 Assembly tools for the interior fittings Assemble door frames and windows

Door frame clamp TU separate and as set

TU: Order-No. Contents/pc. Opening Q Gently and precisely braces and sup- ports door casing during foam filling of mm kg qty. V3 wall joint TU 1 Stück 565-1010 1.27 2 Q Telescopic square anodised aluminium 6 pieces TU TU-TRAGE 565-1010 9.78 1 tubing with mm scale and adjusting in nylon case screw for precision work Q Cross-shaped pressure plate with inter- changeable clamping elements for frame depths of 6 to 13 cm or 13 to 30 cm Q Removable clamping bracket with Door frame brace extension TUX increased clamping surfaces and removable brackets to insert the door frame securely and easily Order-No. Contents/pc. Opening mm kg qty. V3 TUX: Q Accessories to increase the opening TUX 2 extension rods 1040-1960 0.37 1 width of the TU door frame brace Q This enables extra-wide doors to be installed Door frame straightening clamp TFM Q It can be used without tools in just a few steps Adjusting Order-No. Throat depth range TFM: mm mm kg qty. V3 Q For quick, precise aligning and fixing of door frames TFM-2K 35 70 0.58 2 Q The intelligent companion for the BESSEY door frame clamp TU and TMS

WTR: Angle door frame straightening clamp WTR Q For neatly fixed and stabilised frame Opening chuck Adjusting corners Order-No. thickness range Q For mounting at a precise 90° angle mm mm kg qty. V3 WTR 8-30 32 1.05 2

Window installation clamp FRK

FRK: Frame Adjusting Order-No. thicknesses range Q Permits rapid, precise straightening and fixing of window frames mm mm kg qty. V3 FRK85 40-85 30 0.43 4

20 Assembly tools for the interior fittings Lay boards and floors Simply better.

Seaming tool PS 55 and PS 130

PS55 Order-No. Opening Width Length Q For clamping and positioning components mm mm mm kg qty. V3 with a smooth surface Q clamping force up to 260 N Q Clamping levers on the suction cups PS55 PS55 10-55 144 363 1.68 1 ensure rapid handling

PS130, big and strong PS130 5-130 215 715 4.08 1 Q For clamping and positioning large and potentially heavy components with a smooth surface PS130 Q Manual vacuum pumps for maximum suction power, and therefore a maximum level of horizontal clamping force up to 1,200 N 4 ¾ In. 210 mm 120 mm Q Marking ring on the pump lever to 8 ¼ In. PS 55 permanently check for a reliable vacuum

PS 130

Spacer AV2 (4 pcs./bag)

Adjusting Q Quickly and infinitely adjustable for wall Order-No. Opening Jaw width range distances of 5 to 20 mm mm mm mm kg qty. V3 Q Spacer for floating laminate and parquet AV2 20 89 5-20 0.22 12 flooring installations Q Wide contact and support area for avoiding pressure points on the floorboards and plaster Q Easy to remove by simply turning back Q Very light and compact

21 Telescopic drywall supports All firmly under control!

Secure hold Resilient and anti-slip, the support guarantees secure holding, even on sensitive surfaces: Q due to special steel pipes ensures a max load of 150 kg can be applied (dependent upon the size of support and length applied) Easy to handle Q due to additional locking of the release button The support can be used quickly: Q due to rubber PVC contact surfaces top and bottom Q due to the fixing in just two steps: The rough pre-setting is carried out using the telescoping and quickly locking inner pipe; the final clamping is carried out by turning the support 2.0001.500 N at the foam grip 445150 lbkg

YouTube

Telescopic drywall support ST

Q Resilient up to a maximum of 150 kg Load limit Adjusting Order-No. at min. at max. when the telescopic rod is fully retracted range extension length extension length Q Stable construction due to special steel mm kg kg kg qty. V3 pipes and anti-slip PVC cont act surfaces (8,5 x 6,5 cm) ST125 750-1250 150 60 1.41 2 Q Application also on slopes due to conti- ST250 1450-2500 150 60 2.06 2 nuously swivelable contact surfaces of ST290 1600-2900 150 50 2.24 2 -45° to +45° Q Easy, safe handling due to a telescoping and locking inner pipe as well as an max. outer pipe that can be turned by the 20 kg foam grip Q GS-certified for quality and safety

max. 45°

22 Simply better.

Extremely secure hold Quick and accurate handling The support guarantees a reliable and secure hold: The support can be precisely set to Q due to robust design ensures a max load of 350 kg can requirements, and safely released: be applied (dependent upon the size of support and Q due to fixing in three steps: In order to length applied) pre-set the telescopic drywall support Q due to rubber PVC contact surfaces top press the release button and extend the and bottom (9 x 7 cm) telescopic inner tube to the desired length. Q due to anti-slip system integrated Fine adjustment takes place by pressing in the grip the pump lever until the system plate of the support lies against the workpiece. Then turn the grip clockwise until the desired holding force is attained (observe the max. load-bearing capacity) Q due to releasing in two steps: First turn the telescopic drywall support anti-clock- wise. As soon as no further holding force 3.500 N is present, press the release button to 350 kg retract the inner tube. Q due to the fixing in just two steps: locking inner pipe; the final clamping NEW Telescopic drywall support STE with pump grip

Load limit Q Resilient up to a maximum of 350 kg Adjusting Order-No. at min. at max. range when the telescopic rod is fully retracted extension length extension length Q Single-handed operation thanks to mm kg kg kg qty. V3 2-component plastic handle with pump STE250 1450-2500 350 160 3.80 2 mechanism STE300 1700-3000 350 110 4.45 2 Q Quick-slide button for rapid extension STE370 2070-3700 350 65 5.20 2 and retraction of the telescopic bar YouTube Q Application also on slopes due to continuously swivelling contact surfaces from -45° to +45° Q GS-certified for quality and safety

NEW Multi-function/laser fixture STE-LH STE-LH: Order-No. Length Width Height Q Accessory with 1/4" thread for holding a mm mm mm kg qty. V3 laser, camera etc STE-LH 200 140 60 0.25 1 Q Can be used without tools on round (0-45 mm) and angular (0-55 mm) support parts such as ceiling and Support plate STE-SP35 NEW assembly supports, profiles, ladders Q L-shaped rotating fixture with 2 rotation Order-No. Length Width Height axes: 360° next to fixing clamp, 180° at threaded connection mm mm mm kg qty. V3 STE-SP35 355 80 22 0.60 1 STE-SP35: Q Light aluminium profile with non-slip Replacement contact surface cellular rubber NEW Q For increasing the support surface of Suitable BESSEY ceiling and assembly supports Order-No. Length Width Height for ST (only in conjunction with replacement mm mm mm kg qty. V3 contact surface 3101952) and STE 3101952 ST, STE 90 70 10 0.15 1 Q Secure fastening onto the contact surfaces thanks to star grip screws 23 Variable high-performance clamps New flexibility with large clamping widths

Secure Versatile

Q due to high clamping In addition to classic clamping forces up to 6,500 N at SLV work, the clamp can also be resp. 9,000 N at GSV used for spreading. It can be ■ due tipping is prevented fed through an opening in the through central positioning workpiece/component and add on the workpiece additional sliding arms easily. ■ due to end fastenings on both sides which can be loosened without tools

Durable You Tube ■ due to the heat-resistant pressure plate, which can be tilted up to 35° – GSV has a hardened and oil-soaked sintered steel insert for outstanding sliding and emer- gency running properties ■ due to a tempered spindle

Variable high-performance clamps – Complete sets SLV/GSV ■ Clamping force up to 6,500 N (SLV) or 9,000 N (GSV) Order-No. ■ Tipping is prevented through central mm mm mm mm kg qty. V2 positioning on the workpiece Variable high-performance clamp set SLV ■ Special heat-resistant pressure plate, SLV100M 1000 120 340-1250 27 x 13 4.71 1 can be tilted by up to 35° – GSV with SLV150M 1500 120 340-1750 27 x 13 5.90 1 sintered steel insert SLV200M 2000 120 340-2250 27 x 13 6.50 1 ■ Clamp can be fed through an opening Variable high-performance clamp set GSV in the workpiece/component GSV300M 3000 140 400-3340 30 x 15 12.98 1 ■ Wide range of possible applications SLV GSV due to interchangeable sliding arm available in various different designs (see accessories) 24 Simply better.

SLV100M Throat depth: 3101731 120 SLV150M 3101732 GSV300M 3101612 SLV200M 3101733

Throat depth: 4 clamp sets 120/140/200 mm

+ 4 rails Throat depth: + 6 sliding arms 120 mm = “X” options

Throat depth: 120 mm

SLV/GSV size rails

27 x 13 mm (SLV) or 30 x 15 mm (GSV) Order-No. ■ profile, cold drawn and galvanised mm mm kg qty.. V2 ■ End fastenings on both sides can be SLV size rail loosened without tools – for rapid 3101731 1000 27 x 13 2.85 1 changeover 3101732 1500 27 x 13 4.05 1 ■ Suitable for all SLV or GSV size sliding 3101733 2000 27 x 13 5.25 1 arms GSV size rail (SLV) 3101612 3000 30 x 15 10.40 1 (GSV)

Complete sliding arm for SLV sizes

Three different grip variants/designs 3101426 Order-No. Description ■ ■ Suitable for all SLV size rails 3101337 mm mm kg qty. V3 3101426 Wooden handle 120 27 x 13 0.73 1 3101337 Lever handle 120 27 x 13 1.10 1 Tommy bar incl. 3101338 120 27 x 13 0.82 1 3101338 special pressure plate

Complete sliding arm for GSV sizes

■ One arm design with three throat depths Order-No. Description ■ Suitable for GSV size rails mm mm kg qty. V3 3101329 Tommy bar incl. 120 30 x 15 1.13 1 3101330special pressure plate 140 30 x 15 1.21 1 3101331with sintered steel insert 200 30 x 15 1.40 1 25 Rafter clamps Clamp rafters and beams

Your benefits at a glance:

1 Hammer-in tip First of all, the tip is driven into the rafter. The clamp is then quickly closed, to allow you to start right away with powerful clamping. 2 Broad impact surface The broad impact surface makes it easier to drive in the clamp. 3 Special tilting pressure plate With the SPZ 80 K, the special tilting pressure plate ensures problem-free clamping even when working with slo- ping parts. It can be tilted by up to 35°. 4 Sturdy hexagonal bolt The SPZ 80 K’s tough hexagonal bolt allows powerful yet controlled tighte- ning, with the help of a torque wrench.

Rafter clamp SPZ

Q Clamping force up to 12,000 N Throat Order-No. Opening Rail Q For all roofing and timber frame depth constructions mm mm mm kg qty. V2 Q SPZ 80 K with 17 mm hexagonal bolt SPZ60K 600 120 27 x 13 2.90 5 and heat-resistant pressure plate with SPZ80K 800 140 30 x 15 5.00 2 sintered steel insert, which can be tilted up to 35°

Special pressure plate

Q Long life due to heat-resistant pres- Order-No. Description Suitable for sure plate with sintered steel insert, which can be tilted up to 35° V3 3100736 Standard Three design versions: SLV, GSV, SPZ80K 3101192 Serrated Q Smooth faced (standard version) Q Rough faced for secure clamping on 3101193 V-grooved dirty surfaces Q V-groove face for round, oval and edged workpieces 3101219 Cutting ring SLV, GSV, SPZ80K Anti-slip clamping with the cutting ring pressure plate While stocks last 26 Sash and pipe clamps Glue powerfully Simply better.

Sash clamps

Jaw dimensions TAN: Order-No. Opening w x h Q Clamping force up to 24,000 N mm mm kg qty. V3 Q Easily adjustable pressure plates with I-profile 80 x 42 x 3,9 mm Q Removable crank handle Q TAN120 1200 80 x 80 10.10 1 Very sturdy thanks to I-profile TAN150 1500 80 x 80 12.20 1 TB: TAN210 2100 80 x 80 15.00 1 Q Clamping force up to 14,000 N TAN250 2500 80 x 80 17.50 1 Q With attached locking bolt with T-profile 40 x 40 x 5 mm Q Tommy bar TB100 1000 66 x 43 5.07 1 Q Sturdy thanks to T-profile TB120 1200 66 x 43 5.54 1 TB150 1500 66 x 43 6.03 1 TL: TB210 2100 66 x 43 7.87 1 Q Clamping force up to 9,900 N TB250 2500 66 x 43 9.43 1 Q Easily adjustable pressure plates Q Crank handle light with I-profile 37 x 11 x 4,5 mm Q Very sturdy thanks to I-profile TL60 600 48 x 53 3.80 2 TL90 900 48 x 53 4.30 2 TL120 1200 48 x 53 5.00 2 TL180 1800 48 x 53 6.30 2

Pipe clamping set BPC

Q Suitable for steel pipes DN 20 / R 3/4" Ø Order-No. For pipes Throat depth or DN 15 / R 1/2" mm " mm kg qty. V3 Q Outer diameter 26.9 mm or 21.3 mm BPC-H12 21.3 1/2 40 0.88 4 Q Infinitely-adjustable clamping width BPC-H34 26.9 3/4 42 1.30 4 Q With stand

27 Clamping tools and Cutting tools by professionals for professionals Simply better.

When it comes to innovative solutions for clamping and fixing workpieces and cutting sheet metal, this is the right place. No matter if classic clamps, traditional sheet metal snips or spe- cial solutions are required for special work requirements, BESSEY offers the right clamping and cutting tool for every craftsman in wood and metalworking in order to optimally support it in its work.

Detailed information about all products at www.bessey.de Clamping tools

Clamping elements for High-performance clamps Grip pliers Metal angle clamps welding tables

Cutting tools

Shape and straight cutting snips Folding utility knives Compound leverage snips Multi-purpose cutters D15A and multitool

Your dealer:

BESSEY Tool GmbH & Co. KG Q Mühlwiesenstraße 40 74321 Bietigheim-Bissingen, Germany Fon +49 7142 401-0 Q Fax +49 7142 401-452 Pr-BESSEY-Holzprodukte__EN -3010300 f E-Mail: [email protected] 0 7 /2021 Errors and omissions excepted.

More information www.bessey.de 1HZVOHWWHU