DOCSLIB.ORG

Hold Tight to Urrea. Vises and C - Clamps

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hold Tight to Urrea. Vises and C - Clamps HOLD TIGHT TO URREA. VISES AND C - CLAMPS. Urrea vises and c-clamps give me the power I need to hold one or more elements efficiently while undergoing different mechanical operations such as sawing, drilling, milling, filing or marking. It is essential to have the best tool in the manufacturing of any iron product or any other material that has to be fastened to work it. The vises and c-clamps presented in this chapter are of different materials and sizes, such as the bench vises that are usually bolted on a table or workbench, or bolted to the bumper of a work truck. They meets national and international standards, American and European. urreaprofessionaltools.com 14 PRECISION MILLING VISES 45103 45202 45305 • Hardened jaws (53 to 59 HRc). Squareness and parallelism precise to within 0.0012” (30 microns). • Precision vises are casted of high-tension, close-grained cast steel. They have a scratch- and rust-proof gray polychromatic finish. VISES ITEM 45103 45106 45202 45203 45204 45205 45206 45305 45306 JAW WIDTH 3” 6” 2” 3” 4” 5” 6” 5” 6” JAW DEPTH 1-1/2” 1-3/4” 1” 1-5/16” 1-1/2” 1-3/4” 1-3/4” 1-3/4” 1-3/4” AXIS 1 1 2 2 2 2 2 3 3 1 1 1 1 1 1 1 1 1 LIST PRICE $593.93 $1,271.77 $377.70 $643 $878.04 $1,252.30 $1,646.29 $1,399.64 $2,008.13 HEAVY DUTY WORKBENCH VISES Swivel NEW Base 4 mounting posts Hardened steel pipe jaws designed to hold pipe from 1/4” to 2-1/2” 425HD • Heavy-duty castings are built for rugged use and extended life. • Lifetime lubrication: grease is permanetly sealed in for trouble-free service. ITEM 424HD 425HD 426HD 427HD JAW WIDTH 4” 5” 6” 8” fine Carbon Diamond MAXIMUM OPENING 4-1/4” 5-15/64” 5-63/64 8-1/2” steel Type texture Polished THROAT DEEP 3-27/64” 3-47/64” 4-9/64” 4-31/64” PIPE JAW CAPACITY 1/4” to 2” 1/4” to 2-1/2” 1/4” to 2-1/2” 1/4” to 2-1/2” A 1 1 1 1 B LIST PRICE $278.15 $364.56 $457.12 $556.30 REPLACEMENT JAWS DISTANCE SCREW MEASUREMENT SCREWS JAWS LIST ITEM FOR VISE BETWEEN HOLES (A) (B) INCLUDED INCLUDED PRICE 424HDK • 2-1/2” 7/16" 3/16" 2 2 (1 pair) 1 $21.87 425HDK • 2-1/2” 7/16" 3/16" 2 2 (1 pair) 1 $31.53 427HDK 42HDK 426HDK • 4" 1/2" 1/4" 2 2 (1 pair) 1 $40.77 • Made from hardened steel. 427HDK • 4" 1/2" 1/4" 2 2 (1 pair) 1 $60.57 • Serrated machinist jaws provides excellent grip for holding projects. 42HDK • • • • N/A 1/2" 3/16" 2 2 (1 pair) 1 $30.10 • Includes one pair of jaws with mounting screws. 232 VISES AND CLAMPS VISES AND CLAMPS 14 INDUSTRIAL-GRADE WORKBENCH VISES Swivel Base • Made of malleable cast iron. 424N • Pipe clamp for up to 2 “in diameter. • Forged jaws. ITEM 424N 425N 426N 428N fine JAW WIDTH 4” 5” 6” 8” Carbon Diamond steel Type texture Polished MAXIMUM OPENING 4-1/4” 5-15/64” 5-63/64 8-1/2” THROAT DEEP 3-27/64” 3-47/64” 4-9/64” 4-31/64” VISES PIPE JAW CAPACITY 1/4” to 2” 1/4” to 2” 1/4” to 2” 1/4” to 2” A 1 1 1 1 B LIST PRICE $250.33 $328.10 $411.40 $500.67 REPLACEMENT JAWS DISTANCE SCREW MEASUREMENT SCREWS JAWS LIST ITEM FOR VISE BETWEEN HOLES (A) (B) INCLUDED INCLUDED PRICE 424NK 424NK • 2-1/2” 1/2” 3/16" 2 2 (1 pair) 1 $28.80 425NK • 2-1/2” 1/2” 3/16" 2 2 (1 pair) 1 $35.90 • Made from hardened steel. 426NK • 4” 1/2" 1/4" 2 2 (1 pair) 1 $40.67 • Serrated machinist jaws provides excellent grip for holding projects. 428NK • 4” 1/2" 1/4" 2 2 (1 pair) 1 $48.28 • Includes one pair of jaws with mounting screws. C-CLAMPS • Design provides greater reach and • Drop forged. throat depth. • Acme rolled spindle: threads provide continous • Forged. smooth operation for faster clamping action and • They feature a large diameter maximum extregth. screw, a confortable sliding • Copper plated resistant to welding spatter and CLAMPS T-handle and ACME thread that corrosion. makes turning easy. 406W 406PRO Deep throat with copper coating Heavy-duty ITEM MAXIMUM OPENING THROAT DEPTH LIST PRICE Heavy-Duty 404PRO 4” 2” 1 $49.61 406PRO 6” 2-3/4” 1 $76.83 408PRO 8” 3-3/4” 1 $122.19 410PRO 10” 4-7/8” 1 $178.08 412PRO 12” 5-1/8” 1 $236.08 Deep Throat with copper coating • Design provides greater reach and throat depth. $ 32 • These deep-throated forged body C-clamps are ideal 404W 4" 2-3/4” 1 39. for safely fastening pieces so you can work on them. 406W 6" 3-5/8” 1 $53.03 Mainly used for welding and soldering, in workshops 408W 8" 4-1/2” 1 $70.67 or for industrial purposes. 410W 10" 5-3/8” 1 $102.99 412W 12" 5-3/4” 1 $140.34 Deep Throat 402 2” 2” 1 $19.03 403 3” 2-3/8” 1 $28.62 404 4” 2-3/4” 1 $36.75 406 6” 3-5/8” 1 $49.57 406 1 $ 05 Deep throat 408 8” 4-1/2” 66. 410 10” 5-3/8” 1 $96.26 412 12” 5-3/4” 1 $131.16 233 HEAVY DUTY F-CLAMPS F-CLAMPS NEW • Trapezoidal thread • Hardened steel • Ball bearings totally sealed brake. mechanism brings and permanently more clamping force lubricated. with less effort. • Nodular casting jaws. • Ergonomic aluminium handle with multiple positions. • Ratcheting system for easy • High resistance H-shape steel bar. adjustment and quick release. • 2200 lb maximum Clamping force. • Width opening capacity. • Includes PVC jaw protector pads. • 900 lb maximum clamping force. With ball bearings mechanism With ratcheting system CLAMPS ITEM MAXIMUM OPENING THROAT DEPTH LIST PRICE ITEM MAXIMUM OPENING THROAT DEPTH LIST PRICE 4F12X 12" 4,22" 1 $163.95 4FM12 11-1/2” 5-1/2” 1 $127.82 4F18X 18" 5" 1 $243.53 4FM24 23-1/2” 5-1/2” 1 $150.56 4F24X 24" 5" 1 $261.08 PORTABLE WORKBENCH Max clamping force 1000 N Clamp for regular workpieces. 32 1/4” 35 7/16” Extendible press which can hold extra wide (37”) workpieces. • All steel construction for greater durability and better resistance. • Progressive jaw advancement; its foot-pedal operated clamp/unlock, secures workpiece in place. ITEM CLAMPING RANGE CLAMPING JAW SIZE MAXIMUM LOAD LIST PRICE BT900 0 - 37 7/16” 8” x 3” x 0.3” 330 lb 1 $542.09 234.
Load more

Recommended publications
  • Tiny Vise Edge Clamps Truly Exert Down Thrust Force on the Workpiece, to Prevent It from Lifting
    +44 (0)1204 699959 [email protected] www.hyquip.co.uk/web/index TINY VISE ™ EDGE CLAMPS BODY: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH THRUST WASHER: 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH FLAT-HEAD SOCKET SCREW: STEEL, BLACK OXIDE FINISH An important clamping development! These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design features a slotted countersink to provide strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Each clamp has both a serrated face (for maximum gripping) and a smooth face (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Flat Jaw Patent number 5.624.106. Made in USA. (Reversible, Serrated or Smooth) Clamping force is applied by positive screw action with the easy turn of a hex wrench (not with an unreliable, unsafe eccentric cam as Clamping force is applied by positive screw action with used in other designs). A high-strength Flat- the easy turn of a hex wrench. Head Socket Screw engages a mating offset countersink to exert strong clamping force. Much more durable than other designs. Only Tiny Vise Edge Clamps truly exert down thrust force on the workpiece, to prevent it from lifting. A thrust washer underneath the clamp engages a mating offset countersink to provide downward action. Patented design features a slotted countersink. Available in a wide range of sizes, from a miniature #8-32 thread size, up to a powerful 1”-8 thread size with 2500 lbs clamping force.
    [Show full text]
  • IO-INCH DIRECT DRIVE BAND SA W CAUTION: Read GENERAL and ,, Assembly ADDITIONAL SAFETY INSTRUCTIONS • Operating Carefully , Repair Parts
    SAVE THIS MANUAL FOR FUTURE REFERENCE _ARS owners manual MODEL NO. 113.244512 Serial Number Model and serial number may be found at the right-hand side of the frame. You should record both model and serial number in a safe place for future use. IO-INCH DIRECT DRIVE BAND SA W CAUTION: Read GENERAL and ,, assembly ADDITIONAL SAFETY INSTRUCTIONS • operating carefully , repair parts Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A. Part No. 69188 FULL ONE YEAR WARRANTY ON CRAFTSMAN BAND SAW If within one year from the date of purchase, this Craftsman Band Saw fails due to a defect in material or workmanship, Sears will repair it, free of charge. ,WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT THROUGHOUT THE UNITED STATES. THIS WARRANTY APPLIES ONLY WHILE THIS PRODUCT IS USED IN THE UNITED STATES. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, SEARS, ROEBUCK AND CO.. 698/731A, Sears Tower, Chicago. IL 60684 general safety instructions for power tools 1. KNOW YOUR POWER TOOL Z87.1) at all times. Everyday eyeglasses only Read and understand the owner's manual and have impact resistant lenses, they are NOT labels affixed to the toot. Learn its application safety glasses. Also, use face or dust mask if and limitations as well as'the specific potential cutting operation is dusty, and ear protectors hazards peculiar to this toot, (plugs or muffs) during extended periods of 2. GROUND ALL TOOLS operation.
    [Show full text]
  • MACHINE VISE SHEETS.Idw
    PARTS LIST ITEM QTY PART NUMBER MATERIAL DESCRIPTION 1 1 BASE CAST IRON 2 1 SLIDING JAW CAST IRON 3 2 JAW PLATE SAE 3140 4 1 VISE SCREW SAE 3140 5 1 COLLAR SAE 1020 6 1 SPECIAL KEY SAE 1020 7 1 HANDLE ROD COLD ROLLED STELL 8 2 HANDLE BALL SAE 1020 9 2 SLIDE KEY SAE 1020 10 2 SET SCREW SAE 1016 11 4 SLOTTED FLAT STEEL MILD ANSI B18.6.3 - 10-24 x COUNTERSUNK HEAD 5/8 MACHINE SCREW 12 2 TAPER PIN STANDARD #000 TAPER PIN LEGEND: DIAMETER R RADIUS ° DEGREES COUNTERBORE DEPTH COUNTERSINK MASTER ASSEMBLY SCALE 1 : 1 GENERAL NOTES: FILLEDS AND ROUNDS R.125 UNLESS OTHERWISE NOTED COURSE: DDGT240 INVENTOR NAME: MACHINE VISE TOLERANCE UNLESS SPECIFIED FIG #: DECIMAL INCHES: 14-17 X = ±.020 DRAFTER: XX = ±.010 P. FLORES DIGITAL DESIGN XXX = ±.005 GRAPHICS FRACTIONAL ±1/64" DATE: 10/5/2018 ANGLE ± 1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 1 OF 5 PARTS LIST ITEM QTY PART NUMBER 4X 5/16 4X R1 1/8 1 1 BASE 1 4 2 3/4 5/8-8ACME 4X R1/4 5 7 1/4 2X 1/4-20UNC-2B 5/8 5/8-8ACME B R11/16 1 1/4 5 1 1/2 5/8 R1/4 1 3/16 .502 1 3/4 1/8 .498 1 2 1/4 2 3/16 MACHINE VISE STEP 1 B 1 9/16 1 11/16 R1/4 SCALE 1 / 2 SECTION B-B 1 1/16 .502 SCALE 1 / 2 .627 .500 5/16 BASE .625 1.004 SCALE 1 / 2 1.000 1.254 1.250 COURSE: DDGT240 INVENTOR NAME: LEGEND: MACHINE VISE DIAMETER TOLERANCE UNLESS SPECIFIED FIG #: DECIMAL INCHES: 14-17 R RADIUS X = ±.020 DRAFTER: DIGITAL DESIGN XX = ±.010 P.
    [Show full text]
  • 60" Workbench
    Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 69054 60" Workbench Visit our website at: http://www.harborfreight.com Email our technical support at: [email protected] When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Copyright© 2012 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product. any shape or form without the express written consent of Harbor Freight Tools. Failure to do so can result in serious injury. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL. improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Table of Contents Safety ......................................................... 2 Parts List and Diagram .............................. 10 Specifications ............................................. 3 Warranty .................................................... 12 Setup .......................................................... 3 SA F ET Y WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
    [Show full text]
  • Paul Sellers' Workbench Measurements and Cutting
    PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST NOTE When putting together the cutting list for my workbench, I worked in imperial, the system with which I am most comfortable. I was not happy, however, to then provide direct conversions to metric because to be accurate and ensure an exact fit this would involve providing measurements in fractions of millimetres. When I do work in metric I find it more comfortable to work with rounded numbers, therefore I have created two slightly different sets of measurements. This means that in places the imperial measurement given is not a direct conversion of the metric measurement given. Therefore, I suggest you choose one or other of the systems and follow it throughout. © 2017 – Paul Sellers v2 PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST WOOD QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) (THICK X WIDE X LONG) (THICK X WIDE X LONG) 4 Leg 2 ¾” x 3 ¾” x 34 ⅜” 70 x 95 x 875mm 1 Benchtop 2 ⅜” x 12” x 66” 65 x 300 x 1680mm 2 Apron 1 ⅝” x 11 ½” x 66” 40 x 290 x 1680mm 1 Wellboard 1” x 12 ½” x 66” 25 x 320 x 1680mm 4 Rail 1 ½” x 6” x 26” 40 x 150 x 654mm 2 Bearer 1 ¼” x 3 ¾” x 25” 30 x 95 x 630mm 4 Wedge ⅝” x 1 ½” x 9” 16 x 40 x 228mm 4 Wedge retainer ⅝” x 1 ½” x 4” 16 x 40 x 100mm HARDWARE QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) 1 Vise 9” 225mm Dome head bolts (including nuts and washers) for 4 ⅜” x 5” 10 x 130mm bolting legs to aprons 2 Lag screws (with washers) for underside of vise ½” x 2 ½” 12 x 65mm 2 Lag screws for face
    [Show full text]
  • Brembana Kosmos
    brembana kosmos jet 5 axes saw jet machine STONE CMS is part of SCM Group, a technological world leader in processing a wide CMS SpA manufactures machinery and systems for the machining of composite range of materials: wood, plastic, glass, stone, metal and composites. The materials, carbon fibre, aluminium, light alloys, plastic, glass, stone and metals. It was Group companies, operating throughout the world, are reliable partners of established in 1969 by Mr Pietro Aceti with the aim of offering customized and state- brembana kosmos jet leading manufacturing industries in various market sectors, including the of-the-art solutions, based on the in-depth understanding of the customer’s production furniture, construction, automotive, aerospace, ship-building and plastic needs. Significant technological innovations, originating from substantial investments processing industries. SCM Group coordinates, supports and develops a in research and development and take-overs of premium companies, have enabled system of industrial excellence in 3 large highly specialized production constant growth in the various sectors of reference. centres employing more than 4,000 workers and operating in all 5 continents. SCM Group: the most advanced skills and know-how in the fields of industrial machinery and components. APPLICATIONS 4-5 BREMBANA KOSMOS JET TECHNOLOGICAL BENEFITS 6-7 ACCESSORIES 8-13 OPTIONAL 14-15 SOFTWARE 16-17 CMS Stone Technology realizes avant-garde solutions for the working of marble, natural stones and composite stones. Under OVERALL DIMENSIONS & TECHNICAL DATA the brand name Brembana Macchine, CMS Stone Technology was in the 80’s the first manufacturer of a stone machining 18-19 centre, thanks to an idea of its founder Mr Pietro Aceti.
    [Show full text]
  • Simple Machines
    Name: _______________________________________ Simple Machines There are six basic types of simple machines: inclined plane, wedge, screw, wheel and axle, lever, and pulley. 1. What is the man doing with the crow bar? Which type of simple machine is he using? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ 2. Why might this woman be drilling a hole? Which type of simple machine will she probably insert in the hole when she's done drilling? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ 6. What is this man doing? What type of simple machine is the ladder that he is standing on? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ Super Teacher Worksheets - www.superteacherworksheets.com 4. What might the woman doing with the cord, wheel and hook? Which basic simple machine is she using? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Snap on On-Site Power Generation Tool Kit Price $ 3095 Sales Tax $185.70 Total $3280.70 Student Name Student ID Email
    Pennsylvania College of Technology Snap On On-Site Power Generation 1650 Pry bar, 16" 211FY Socket Set, Shallow, 12-Pt 3/8 Drive, (11 pc)(1/4" to 7/8") 211SFSY Socket Set, Deep, 6-Pt 3/8 drive, (11 pcs.) (1/4" to 7/8") 212SFSMY Socket Set, Metric, Deep, 6-Pt (12 pcs.) 3/8 drive (8 to 9 mm) 313SMYA Socket Set, Metric, Deep, 12-Pt (13 pcs.) 1/2 drive (12-24 mm) 313SWMYA Socket Set, Metric, Shallow, 12-Pt (13 pcs.) 1/2 drive (12-24 mm) 313SYA Socket Set, Deep, 12-Pt (13 pcs.) 1/2 drive (3/8" to 1 1/8") 317MPC General Set, Standard Shallow, 12-Pt (17 pcs.) 1/2 drive (3/8" to 1 1/8") AWP120 Adjustable Joint, Straight Serrated Jaws, 12 3/4" BP24B Hammer, Ball Peen, 24 oz. MAGM2A03H Flashlight ( was ECF2B discontinued) OEX709B Set, Wrench, Combination, 12-Pt (9 pcs. in tray) (3/8" to 7/8") OEXM710B Set, Wrench, Combination, Metric, 12-Pt (10 pcs. in tray) (10-19 mm) SHDX60R Set Screwdriver, Combination, Instinct Hard Handle, Red 6 pcs. QD3R250 Torque Wrench, Adj. Click-type, Fixed-Ratchet PPC710BK Punch and Chisel Set, 11 pc. (Center/Pin/Starter) FXK11 Extension, Knurled, Friction Ball, 11" 3/8 Drive PPB1226A Punch, Drift, Bronze, 13/16" point, 12 FXK3 Extension, Knurled, Friction Ball, 3" GLASS1BK Glasses, Safety, Clear Lens/Black Frames HBFE24 Hammer, Dead Blow, Soft Grip, 24 oz. OEX30B 15/16" Standard Combination Wrench OEX32B 1" Standard Combination Wrench OEX36B 1 1/8" Standard Combination Wrench OEX40B 1 1/4" Standard Combination Wrench OEXM80B 8mm Metric Combination Wrench PK23A Scraper PL300CF Set, Cutters/Pliers, 3 pcs.
    [Show full text]
  • DP101 Manual
    OPERATOR’S MANUAL 10 in. (254 mm) DRILL PRESS MODEL DP101 THANK YOU FOR BUYING A RYOBI BENCH TOP DRILL PRESS. Your new Drill Press has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new machine. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your machine properly and only for what it is intended, you will enjoy years of safe, reliable service. Please fill out and return the Warranty Registration Card so we can be of future service to you. Thank you again for buying Ryobi tools. SAVE THIS MANUAL FOR FUTURE REFERENCE 1 TABLE OF CONTENTS Rules for Safe Operation....................................................................................................................................................... 3 Specific Safety Rules for Drill Presses .................................................................................................................................. 5 Electrical.................................................................................................................................................................................6 Glossary of Terms ..................................................................................................................................................................7 Features .................................................................................................................................................................................8
    [Show full text]
  • Introduction and Analysis of the Ultrahigh Pressure Water Jet Cutting Multifunctional Application
    2017 WJTA-IMCA Conference and Expo October 25-27, 2017 ● New Orleans, Louisiana Paper INTRODUCTION AND ANALYSIS OF THE ULTRAHIGH PRESSURE WATER JET CUTTING MULTIFUCTIONAL APPLICATION Xue Shengxiong, Chen Zhengwen, Han Caihong, Ren Qile Hefei General Machinery Research Institute Hefei, Anhui, China Chen Bo Nanjing Dadi Water Limited by Share Ltd. Nanjing, Jiangsu, China Wu Ziquan All-Powerful Inc Shenyang, Liaoning, China Li Yuefeng Hua Zhen Mechanical Equipment Co. Ltd Guangzhou, Guangdong, China ABSTRACT The aerospace industry bring a new development for ultrahigh pressure water jet cutting technology, such as large scale curved composite components cutting process engineering application, large scale impeller rough cutting, special precise cutting, composite materials to milling, drill, polishing and so on. As National Advanced Technology Support Project of China for an opportunity, the author developed 500MPa ultrahigh pressure water cutting equipment for super large composite wing and a multifunction water jetting CNC center. This paper introduce the ultrahigh pressure water jet multifunctional technical features about these two equipments involved, and combine with the foreign development situation. The technical modules, parameter matching technology, process method and experiment result are analyzed to realizing the highly-difficult water jet cutting, milling and other applications. Organized and Sponsored by WJTA-IMCA 1. MARKET REQUIREMENT OF HIGH END ULTRAHIGH PRESSURE WATER CUTTING In China, technology and equipment development of ultrahigh pressure water cutting have been a full twenty years. The first water cutting machine developed by author is 250MPa of pressure, 2.5L/min of flow. And the current main water cutting products which use ultrahigh pressure intensifier or reciprocating pump are 400MPa of pressure, 3L/min of flow [1].
    [Show full text]
  • Ultrahd 2-Door Rolling Workbench
    ASSEMBLY INSTRUCTIONS UltraHD® 2-Door Rolling Workbench (Model No. 20262, 20142, 20152) Granite Graphite Red 77 in. W x 20 in. D x 37.5 in. H (1.95 m W x 50.8 cm D x 95.2 cm H) Reference page 15 for special care and maintenance of stainless steel SC200304 #8 #41 #1 #11 Small #27-B Drawers #40 #12-B #4 #24 #27 #26 #9 #12 #2 Medium Drawer #57 #13 #23 #6 #5 #42 #15 #13-B Large Drawer #20-A #18 #20-B #19 #3 #17 1 2 Small Drawer #26-2 #15 #26-1 Medium Drawer #12-5 #12-2 #12-1 #15 Large Drawer #13-4 #13-2 #13-1 #15 3 PARTS LIST Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please see page 15.) (#1) LEFT SIDE PANEL x 1 PC (#2) RIGHT SIDE PANEL x 1PC (#3) FRONT FRAME x 1 PC (#4) BACK FRAME x 1 PC (#5) BASE PANEL x 1 PC (#6) SHELF x 1 PC (#8) SOLID HARDWOOD TOP x 1 PC (#9) PUSH BAR x 2 PCS 34 PARTS LIST Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please see page 15.) (#11) LEFT SIDE SLIDER SUPPORT x 1PC (#12-1) MEDIUM-SIZE DRAWER FRONT x 1 PC (#12-2) MEDIUM-SIZE DRAWER BOTTOM PANEL x 1 PC (#12-5) MEDIUM-SIZE DRAWER BACK PANEL x 1 PC (#12-B) WHEEL WITH BRAKE x 2 PCS (#13-B) WHEEL W/O BRAKE x 2 PCS (#13-1) LARGE DRAWER FRONT PANEL x 1 PC (#13-2) LARGE DRAWER BOTTOM PANEL x 1 PC 5 PARTS LIST Please check the parts carefully according to the parts list.
    [Show full text]